Searched hist:4 (Results 76 - 100 of 14306) sorted by relevance
/freebsd-9.3-release/sys/dev/stge/ | ||
H A D | if_stgereg.h | diff 227277 Sun Nov 06 19:17:04 MST 2011 marius MFC: r226995, r227042 - Import the common MII bitbang'ing code from NetBSD and convert drivers to take advantage of it instead of duplicating it. This reduces the size of the i386 GENERIC kernel by about 8k. The only potential in-tree users left unconverted are ed(4) and xe(4). Xe(4) generally should be changed to use miibus(4) instead of implementing PHY handling on its own, as otherwise it makes not much sense to add a dependency on miibus(4)/mii_bitbang(4) to it just for the MII bitbang'ing code. Ed(4) has some chip specific things interwinded with the MII bitbang'ing code and it's unclear whether it can be converted to common code, at least not without thorough testing of all the various chips supported by ed(4). The common MII bitbang'ing code also is useful in the embedded space for using GPIO pins to implement MII access. - Based on lessons learnt with dc(4) (see r185750), add bus barriers to the MII bitbang read and write functions of the other drivers converted in order to ensure the intended ordering. Given that register access via an index register as well as register bank/window switching is subject to the same problem, also add bus barriers to the respective functions of smc(4), tl(4) and xl(4). - Sprinkle some const. Thanks to the following testers: Andrew Bliznak (nge(4)), nwhitehorn@ (bm(4)), yongari@ (sis(4) and ste(4)) Thanks to Hans-Joerg Sirtl for supplying hardware to test stge(4). Reviewed by: yongari (subset of drivers) Approved by: re (kib) Obtained from: NetBSD (partially) diff 227277 Sun Nov 06 19:17:04 MST 2011 marius MFC: r226995, r227042 - Import the common MII bitbang'ing code from NetBSD and convert drivers to take advantage of it instead of duplicating it. This reduces the size of the i386 GENERIC kernel by about 8k. The only potential in-tree users left unconverted are ed(4) and xe(4). Xe(4) generally should be changed to use miibus(4) instead of implementing PHY handling on its own, as otherwise it makes not much sense to add a dependency on miibus(4)/mii_bitbang(4) to it just for the MII bitbang'ing code. Ed(4) has some chip specific things interwinded with the MII bitbang'ing code and it's unclear whether it can be converted to common code, at least not without thorough testing of all the various chips supported by ed(4). The common MII bitbang'ing code also is useful in the embedded space for using GPIO pins to implement MII access. - Based on lessons learnt with dc(4) (see r185750), add bus barriers to the MII bitbang read and write functions of the other drivers converted in order to ensure the intended ordering. Given that register access via an index register as well as register bank/window switching is subject to the same problem, also add bus barriers to the respective functions of smc(4), tl(4) and xl(4). - Sprinkle some const. Thanks to the following testers: Andrew Bliznak (nge(4)), nwhitehorn@ (bm(4)), yongari@ (sis(4) and ste(4)) Thanks to Hans-Joerg Sirtl for supplying hardware to test stge(4). Reviewed by: yongari (subset of drivers) Approved by: re (kib) Obtained from: NetBSD (partially) diff 227277 Sun Nov 06 19:17:04 MST 2011 marius MFC: r226995, r227042 - Import the common MII bitbang'ing code from NetBSD and convert drivers to take advantage of it instead of duplicating it. This reduces the size of the i386 GENERIC kernel by about 8k. The only potential in-tree users left unconverted are ed(4) and xe(4). Xe(4) generally should be changed to use miibus(4) instead of implementing PHY handling on its own, as otherwise it makes not much sense to add a dependency on miibus(4)/mii_bitbang(4) to it just for the MII bitbang'ing code. Ed(4) has some chip specific things interwinded with the MII bitbang'ing code and it's unclear whether it can be converted to common code, at least not without thorough testing of all the various chips supported by ed(4). The common MII bitbang'ing code also is useful in the embedded space for using GPIO pins to implement MII access. - Based on lessons learnt with dc(4) (see r185750), add bus barriers to the MII bitbang read and write functions of the other drivers converted in order to ensure the intended ordering. Given that register access via an index register as well as register bank/window switching is subject to the same problem, also add bus barriers to the respective functions of smc(4), tl(4) and xl(4). - Sprinkle some const. Thanks to the following testers: Andrew Bliznak (nge(4)), nwhitehorn@ (bm(4)), yongari@ (sis(4) and ste(4)) Thanks to Hans-Joerg Sirtl for supplying hardware to test stge(4). Reviewed by: yongari (subset of drivers) Approved by: re (kib) Obtained from: NetBSD (partially) diff 227277 Sun Nov 06 19:17:04 MST 2011 marius MFC: r226995, r227042 - Import the common MII bitbang'ing code from NetBSD and convert drivers to take advantage of it instead of duplicating it. This reduces the size of the i386 GENERIC kernel by about 8k. The only potential in-tree users left unconverted are ed(4) and xe(4). Xe(4) generally should be changed to use miibus(4) instead of implementing PHY handling on its own, as otherwise it makes not much sense to add a dependency on miibus(4)/mii_bitbang(4) to it just for the MII bitbang'ing code. Ed(4) has some chip specific things interwinded with the MII bitbang'ing code and it's unclear whether it can be converted to common code, at least not without thorough testing of all the various chips supported by ed(4). The common MII bitbang'ing code also is useful in the embedded space for using GPIO pins to implement MII access. - Based on lessons learnt with dc(4) (see r185750), add bus barriers to the MII bitbang read and write functions of the other drivers converted in order to ensure the intended ordering. Given that register access via an index register as well as register bank/window switching is subject to the same problem, also add bus barriers to the respective functions of smc(4), tl(4) and xl(4). - Sprinkle some const. Thanks to the following testers: Andrew Bliznak (nge(4)), nwhitehorn@ (bm(4)), yongari@ (sis(4) and ste(4)) Thanks to Hans-Joerg Sirtl for supplying hardware to test stge(4). Reviewed by: yongari (subset of drivers) Approved by: re (kib) Obtained from: NetBSD (partially) diff 227277 Sun Nov 06 19:17:04 MST 2011 marius MFC: r226995, r227042 - Import the common MII bitbang'ing code from NetBSD and convert drivers to take advantage of it instead of duplicating it. This reduces the size of the i386 GENERIC kernel by about 8k. The only potential in-tree users left unconverted are ed(4) and xe(4). Xe(4) generally should be changed to use miibus(4) instead of implementing PHY handling on its own, as otherwise it makes not much sense to add a dependency on miibus(4)/mii_bitbang(4) to it just for the MII bitbang'ing code. Ed(4) has some chip specific things interwinded with the MII bitbang'ing code and it's unclear whether it can be converted to common code, at least not without thorough testing of all the various chips supported by ed(4). The common MII bitbang'ing code also is useful in the embedded space for using GPIO pins to implement MII access. - Based on lessons learnt with dc(4) (see r185750), add bus barriers to the MII bitbang read and write functions of the other drivers converted in order to ensure the intended ordering. Given that register access via an index register as well as register bank/window switching is subject to the same problem, also add bus barriers to the respective functions of smc(4), tl(4) and xl(4). - Sprinkle some const. Thanks to the following testers: Andrew Bliznak (nge(4)), nwhitehorn@ (bm(4)), yongari@ (sis(4) and ste(4)) Thanks to Hans-Joerg Sirtl for supplying hardware to test stge(4). Reviewed by: yongari (subset of drivers) Approved by: re (kib) Obtained from: NetBSD (partially) diff 227277 Sun Nov 06 19:17:04 MST 2011 marius MFC: r226995, r227042 - Import the common MII bitbang'ing code from NetBSD and convert drivers to take advantage of it instead of duplicating it. This reduces the size of the i386 GENERIC kernel by about 8k. The only potential in-tree users left unconverted are ed(4) and xe(4). Xe(4) generally should be changed to use miibus(4) instead of implementing PHY handling on its own, as otherwise it makes not much sense to add a dependency on miibus(4)/mii_bitbang(4) to it just for the MII bitbang'ing code. Ed(4) has some chip specific things interwinded with the MII bitbang'ing code and it's unclear whether it can be converted to common code, at least not without thorough testing of all the various chips supported by ed(4). The common MII bitbang'ing code also is useful in the embedded space for using GPIO pins to implement MII access. - Based on lessons learnt with dc(4) (see r185750), add bus barriers to the MII bitbang read and write functions of the other drivers converted in order to ensure the intended ordering. Given that register access via an index register as well as register bank/window switching is subject to the same problem, also add bus barriers to the respective functions of smc(4), tl(4) and xl(4). - Sprinkle some const. Thanks to the following testers: Andrew Bliznak (nge(4)), nwhitehorn@ (bm(4)), yongari@ (sis(4) and ste(4)) Thanks to Hans-Joerg Sirtl for supplying hardware to test stge(4). Reviewed by: yongari (subset of drivers) Approved by: re (kib) Obtained from: NetBSD (partially) diff 227277 Sun Nov 06 19:17:04 MST 2011 marius MFC: r226995, r227042 - Import the common MII bitbang'ing code from NetBSD and convert drivers to take advantage of it instead of duplicating it. This reduces the size of the i386 GENERIC kernel by about 8k. The only potential in-tree users left unconverted are ed(4) and xe(4). Xe(4) generally should be changed to use miibus(4) instead of implementing PHY handling on its own, as otherwise it makes not much sense to add a dependency on miibus(4)/mii_bitbang(4) to it just for the MII bitbang'ing code. Ed(4) has some chip specific things interwinded with the MII bitbang'ing code and it's unclear whether it can be converted to common code, at least not without thorough testing of all the various chips supported by ed(4). The common MII bitbang'ing code also is useful in the embedded space for using GPIO pins to implement MII access. - Based on lessons learnt with dc(4) (see r185750), add bus barriers to the MII bitbang read and write functions of the other drivers converted in order to ensure the intended ordering. Given that register access via an index register as well as register bank/window switching is subject to the same problem, also add bus barriers to the respective functions of smc(4), tl(4) and xl(4). - Sprinkle some const. Thanks to the following testers: Andrew Bliznak (nge(4)), nwhitehorn@ (bm(4)), yongari@ (sis(4) and ste(4)) Thanks to Hans-Joerg Sirtl for supplying hardware to test stge(4). Reviewed by: yongari (subset of drivers) Approved by: re (kib) Obtained from: NetBSD (partially) diff 227277 Sun Nov 06 19:17:04 MST 2011 marius MFC: r226995, r227042 - Import the common MII bitbang'ing code from NetBSD and convert drivers to take advantage of it instead of duplicating it. This reduces the size of the i386 GENERIC kernel by about 8k. The only potential in-tree users left unconverted are ed(4) and xe(4). Xe(4) generally should be changed to use miibus(4) instead of implementing PHY handling on its own, as otherwise it makes not much sense to add a dependency on miibus(4)/mii_bitbang(4) to it just for the MII bitbang'ing code. Ed(4) has some chip specific things interwinded with the MII bitbang'ing code and it's unclear whether it can be converted to common code, at least not without thorough testing of all the various chips supported by ed(4). The common MII bitbang'ing code also is useful in the embedded space for using GPIO pins to implement MII access. - Based on lessons learnt with dc(4) (see r185750), add bus barriers to the MII bitbang read and write functions of the other drivers converted in order to ensure the intended ordering. Given that register access via an index register as well as register bank/window switching is subject to the same problem, also add bus barriers to the respective functions of smc(4), tl(4) and xl(4). - Sprinkle some const. Thanks to the following testers: Andrew Bliznak (nge(4)), nwhitehorn@ (bm(4)), yongari@ (sis(4) and ste(4)) Thanks to Hans-Joerg Sirtl for supplying hardware to test stge(4). Reviewed by: yongari (subset of drivers) Approved by: re (kib) Obtained from: NetBSD (partially) diff 227277 Sun Nov 06 19:17:04 MST 2011 marius MFC: r226995, r227042 - Import the common MII bitbang'ing code from NetBSD and convert drivers to take advantage of it instead of duplicating it. This reduces the size of the i386 GENERIC kernel by about 8k. The only potential in-tree users left unconverted are ed(4) and xe(4). Xe(4) generally should be changed to use miibus(4) instead of implementing PHY handling on its own, as otherwise it makes not much sense to add a dependency on miibus(4)/mii_bitbang(4) to it just for the MII bitbang'ing code. Ed(4) has some chip specific things interwinded with the MII bitbang'ing code and it's unclear whether it can be converted to common code, at least not without thorough testing of all the various chips supported by ed(4). The common MII bitbang'ing code also is useful in the embedded space for using GPIO pins to implement MII access. - Based on lessons learnt with dc(4) (see r185750), add bus barriers to the MII bitbang read and write functions of the other drivers converted in order to ensure the intended ordering. Given that register access via an index register as well as register bank/window switching is subject to the same problem, also add bus barriers to the respective functions of smc(4), tl(4) and xl(4). - Sprinkle some const. Thanks to the following testers: Andrew Bliznak (nge(4)), nwhitehorn@ (bm(4)), yongari@ (sis(4) and ste(4)) Thanks to Hans-Joerg Sirtl for supplying hardware to test stge(4). Reviewed by: yongari (subset of drivers) Approved by: re (kib) Obtained from: NetBSD (partially) diff 227277 Sun Nov 06 19:17:04 MST 2011 marius MFC: r226995, r227042 - Import the common MII bitbang'ing code from NetBSD and convert drivers to take advantage of it instead of duplicating it. This reduces the size of the i386 GENERIC kernel by about 8k. The only potential in-tree users left unconverted are ed(4) and xe(4). Xe(4) generally should be changed to use miibus(4) instead of implementing PHY handling on its own, as otherwise it makes not much sense to add a dependency on miibus(4)/mii_bitbang(4) to it just for the MII bitbang'ing code. Ed(4) has some chip specific things interwinded with the MII bitbang'ing code and it's unclear whether it can be converted to common code, at least not without thorough testing of all the various chips supported by ed(4). The common MII bitbang'ing code also is useful in the embedded space for using GPIO pins to implement MII access. - Based on lessons learnt with dc(4) (see r185750), add bus barriers to the MII bitbang read and write functions of the other drivers converted in order to ensure the intended ordering. Given that register access via an index register as well as register bank/window switching is subject to the same problem, also add bus barriers to the respective functions of smc(4), tl(4) and xl(4). - Sprinkle some const. Thanks to the following testers: Andrew Bliznak (nge(4)), nwhitehorn@ (bm(4)), yongari@ (sis(4) and ste(4)) Thanks to Hans-Joerg Sirtl for supplying hardware to test stge(4). Reviewed by: yongari (subset of drivers) Approved by: re (kib) Obtained from: NetBSD (partially) diff 227277 Sun Nov 06 19:17:04 MST 2011 marius MFC: r226995, r227042 - Import the common MII bitbang'ing code from NetBSD and convert drivers to take advantage of it instead of duplicating it. This reduces the size of the i386 GENERIC kernel by about 8k. The only potential in-tree users left unconverted are ed(4) and xe(4). Xe(4) generally should be changed to use miibus(4) instead of implementing PHY handling on its own, as otherwise it makes not much sense to add a dependency on miibus(4)/mii_bitbang(4) to it just for the MII bitbang'ing code. Ed(4) has some chip specific things interwinded with the MII bitbang'ing code and it's unclear whether it can be converted to common code, at least not without thorough testing of all the various chips supported by ed(4). The common MII bitbang'ing code also is useful in the embedded space for using GPIO pins to implement MII access. - Based on lessons learnt with dc(4) (see r185750), add bus barriers to the MII bitbang read and write functions of the other drivers converted in order to ensure the intended ordering. Given that register access via an index register as well as register bank/window switching is subject to the same problem, also add bus barriers to the respective functions of smc(4), tl(4) and xl(4). - Sprinkle some const. Thanks to the following testers: Andrew Bliznak (nge(4)), nwhitehorn@ (bm(4)), yongari@ (sis(4) and ste(4)) Thanks to Hans-Joerg Sirtl for supplying hardware to test stge(4). Reviewed by: yongari (subset of drivers) Approved by: re (kib) Obtained from: NetBSD (partially) diff 227277 Sun Nov 06 19:17:04 MST 2011 marius MFC: r226995, r227042 - Import the common MII bitbang'ing code from NetBSD and convert drivers to take advantage of it instead of duplicating it. This reduces the size of the i386 GENERIC kernel by about 8k. The only potential in-tree users left unconverted are ed(4) and xe(4). Xe(4) generally should be changed to use miibus(4) instead of implementing PHY handling on its own, as otherwise it makes not much sense to add a dependency on miibus(4)/mii_bitbang(4) to it just for the MII bitbang'ing code. Ed(4) has some chip specific things interwinded with the MII bitbang'ing code and it's unclear whether it can be converted to common code, at least not without thorough testing of all the various chips supported by ed(4). The common MII bitbang'ing code also is useful in the embedded space for using GPIO pins to implement MII access. - Based on lessons learnt with dc(4) (see r185750), add bus barriers to the MII bitbang read and write functions of the other drivers converted in order to ensure the intended ordering. Given that register access via an index register as well as register bank/window switching is subject to the same problem, also add bus barriers to the respective functions of smc(4), tl(4) and xl(4). - Sprinkle some const. Thanks to the following testers: Andrew Bliznak (nge(4)), nwhitehorn@ (bm(4)), yongari@ (sis(4) and ste(4)) Thanks to Hans-Joerg Sirtl for supplying hardware to test stge(4). Reviewed by: yongari (subset of drivers) Approved by: re (kib) Obtained from: NetBSD (partially) diff 227277 Sun Nov 06 19:17:04 MST 2011 marius MFC: r226995, r227042 - Import the common MII bitbang'ing code from NetBSD and convert drivers to take advantage of it instead of duplicating it. This reduces the size of the i386 GENERIC kernel by about 8k. The only potential in-tree users left unconverted are ed(4) and xe(4). Xe(4) generally should be changed to use miibus(4) instead of implementing PHY handling on its own, as otherwise it makes not much sense to add a dependency on miibus(4)/mii_bitbang(4) to it just for the MII bitbang'ing code. Ed(4) has some chip specific things interwinded with the MII bitbang'ing code and it's unclear whether it can be converted to common code, at least not without thorough testing of all the various chips supported by ed(4). The common MII bitbang'ing code also is useful in the embedded space for using GPIO pins to implement MII access. - Based on lessons learnt with dc(4) (see r185750), add bus barriers to the MII bitbang read and write functions of the other drivers converted in order to ensure the intended ordering. Given that register access via an index register as well as register bank/window switching is subject to the same problem, also add bus barriers to the respective functions of smc(4), tl(4) and xl(4). - Sprinkle some const. Thanks to the following testers: Andrew Bliznak (nge(4)), nwhitehorn@ (bm(4)), yongari@ (sis(4) and ste(4)) Thanks to Hans-Joerg Sirtl for supplying hardware to test stge(4). Reviewed by: yongari (subset of drivers) Approved by: re (kib) Obtained from: NetBSD (partially) diff 227277 Sun Nov 06 19:17:04 MST 2011 marius MFC: r226995, r227042 - Import the common MII bitbang'ing code from NetBSD and convert drivers to take advantage of it instead of duplicating it. This reduces the size of the i386 GENERIC kernel by about 8k. The only potential in-tree users left unconverted are ed(4) and xe(4). Xe(4) generally should be changed to use miibus(4) instead of implementing PHY handling on its own, as otherwise it makes not much sense to add a dependency on miibus(4)/mii_bitbang(4) to it just for the MII bitbang'ing code. Ed(4) has some chip specific things interwinded with the MII bitbang'ing code and it's unclear whether it can be converted to common code, at least not without thorough testing of all the various chips supported by ed(4). The common MII bitbang'ing code also is useful in the embedded space for using GPIO pins to implement MII access. - Based on lessons learnt with dc(4) (see r185750), add bus barriers to the MII bitbang read and write functions of the other drivers converted in order to ensure the intended ordering. Given that register access via an index register as well as register bank/window switching is subject to the same problem, also add bus barriers to the respective functions of smc(4), tl(4) and xl(4). - Sprinkle some const. Thanks to the following testers: Andrew Bliznak (nge(4)), nwhitehorn@ (bm(4)), yongari@ (sis(4) and ste(4)) Thanks to Hans-Joerg Sirtl for supplying hardware to test stge(4). Reviewed by: yongari (subset of drivers) Approved by: re (kib) Obtained from: NetBSD (partially) diff 227277 Sun Nov 06 19:17:04 MST 2011 marius MFC: r226995, r227042 - Import the common MII bitbang'ing code from NetBSD and convert drivers to take advantage of it instead of duplicating it. This reduces the size of the i386 GENERIC kernel by about 8k. The only potential in-tree users left unconverted are ed(4) and xe(4). Xe(4) generally should be changed to use miibus(4) instead of implementing PHY handling on its own, as otherwise it makes not much sense to add a dependency on miibus(4)/mii_bitbang(4) to it just for the MII bitbang'ing code. Ed(4) has some chip specific things interwinded with the MII bitbang'ing code and it's unclear whether it can be converted to common code, at least not without thorough testing of all the various chips supported by ed(4). The common MII bitbang'ing code also is useful in the embedded space for using GPIO pins to implement MII access. - Based on lessons learnt with dc(4) (see r185750), add bus barriers to the MII bitbang read and write functions of the other drivers converted in order to ensure the intended ordering. Given that register access via an index register as well as register bank/window switching is subject to the same problem, also add bus barriers to the respective functions of smc(4), tl(4) and xl(4). - Sprinkle some const. Thanks to the following testers: Andrew Bliznak (nge(4)), nwhitehorn@ (bm(4)), yongari@ (sis(4) and ste(4)) Thanks to Hans-Joerg Sirtl for supplying hardware to test stge(4). Reviewed by: yongari (subset of drivers) Approved by: re (kib) Obtained from: NetBSD (partially) diff 227277 Sun Nov 06 19:17:04 MST 2011 marius MFC: r226995, r227042 - Import the common MII bitbang'ing code from NetBSD and convert drivers to take advantage of it instead of duplicating it. This reduces the size of the i386 GENERIC kernel by about 8k. The only potential in-tree users left unconverted are ed(4) and xe(4). Xe(4) generally should be changed to use miibus(4) instead of implementing PHY handling on its own, as otherwise it makes not much sense to add a dependency on miibus(4)/mii_bitbang(4) to it just for the MII bitbang'ing code. Ed(4) has some chip specific things interwinded with the MII bitbang'ing code and it's unclear whether it can be converted to common code, at least not without thorough testing of all the various chips supported by ed(4). The common MII bitbang'ing code also is useful in the embedded space for using GPIO pins to implement MII access. - Based on lessons learnt with dc(4) (see r185750), add bus barriers to the MII bitbang read and write functions of the other drivers converted in order to ensure the intended ordering. Given that register access via an index register as well as register bank/window switching is subject to the same problem, also add bus barriers to the respective functions of smc(4), tl(4) and xl(4). - Sprinkle some const. Thanks to the following testers: Andrew Bliznak (nge(4)), nwhitehorn@ (bm(4)), yongari@ (sis(4) and ste(4)) Thanks to Hans-Joerg Sirtl for supplying hardware to test stge(4). Reviewed by: yongari (subset of drivers) Approved by: re (kib) Obtained from: NetBSD (partially) diff 227277 Sun Nov 06 19:17:04 MST 2011 marius MFC: r226995, r227042 - Import the common MII bitbang'ing code from NetBSD and convert drivers to take advantage of it instead of duplicating it. This reduces the size of the i386 GENERIC kernel by about 8k. The only potential in-tree users left unconverted are ed(4) and xe(4). Xe(4) generally should be changed to use miibus(4) instead of implementing PHY handling on its own, as otherwise it makes not much sense to add a dependency on miibus(4)/mii_bitbang(4) to it just for the MII bitbang'ing code. Ed(4) has some chip specific things interwinded with the MII bitbang'ing code and it's unclear whether it can be converted to common code, at least not without thorough testing of all the various chips supported by ed(4). The common MII bitbang'ing code also is useful in the embedded space for using GPIO pins to implement MII access. - Based on lessons learnt with dc(4) (see r185750), add bus barriers to the MII bitbang read and write functions of the other drivers converted in order to ensure the intended ordering. Given that register access via an index register as well as register bank/window switching is subject to the same problem, also add bus barriers to the respective functions of smc(4), tl(4) and xl(4). - Sprinkle some const. Thanks to the following testers: Andrew Bliznak (nge(4)), nwhitehorn@ (bm(4)), yongari@ (sis(4) and ste(4)) Thanks to Hans-Joerg Sirtl for supplying hardware to test stge(4). Reviewed by: yongari (subset of drivers) Approved by: re (kib) Obtained from: NetBSD (partially) |
/freebsd-9.3-release/share/man/man4/ | ||
H A D | esp.4 | diff 227305 Mon Nov 07 11:54:31 MST 2011 marius MFC: r227006, r227281, r227282 Add a PCI front-end to esp(4) allowing it to support AMD Am53C974 and replace amd(4) with the former in the amd64, i386 and pc98 GENERIC kernel configuration files. Besides duplicating functionality, amd(4), which previously also supported the AMD Am53C974, unlike esp(4) is no longer maintained and has accumulated enough bit rot over time to always cause a panic during boot as long as at least one target is attached to it (see PR 124667). PR: 124667 Approved by: re (kib) Obtained from: NetBSD (based on) diff 227305 Mon Nov 07 11:54:31 MST 2011 marius MFC: r227006, r227281, r227282 Add a PCI front-end to esp(4) allowing it to support AMD Am53C974 and replace amd(4) with the former in the amd64, i386 and pc98 GENERIC kernel configuration files. Besides duplicating functionality, amd(4), which previously also supported the AMD Am53C974, unlike esp(4) is no longer maintained and has accumulated enough bit rot over time to always cause a panic during boot as long as at least one target is attached to it (see PR 124667). PR: 124667 Approved by: re (kib) Obtained from: NetBSD (based on) diff 227305 Mon Nov 07 11:54:31 MST 2011 marius MFC: r227006, r227281, r227282 Add a PCI front-end to esp(4) allowing it to support AMD Am53C974 and replace amd(4) with the former in the amd64, i386 and pc98 GENERIC kernel configuration files. Besides duplicating functionality, amd(4), which previously also supported the AMD Am53C974, unlike esp(4) is no longer maintained and has accumulated enough bit rot over time to always cause a panic during boot as long as at least one target is attached to it (see PR 124667). PR: 124667 Approved by: re (kib) Obtained from: NetBSD (based on) diff 227305 Mon Nov 07 11:54:31 MST 2011 marius MFC: r227006, r227281, r227282 Add a PCI front-end to esp(4) allowing it to support AMD Am53C974 and replace amd(4) with the former in the amd64, i386 and pc98 GENERIC kernel configuration files. Besides duplicating functionality, amd(4), which previously also supported the AMD Am53C974, unlike esp(4) is no longer maintained and has accumulated enough bit rot over time to always cause a panic during boot as long as at least one target is attached to it (see PR 124667). PR: 124667 Approved by: re (kib) Obtained from: NetBSD (based on) 130861 Mon Jun 21 16:20:57 MDT 2004 trhodes Add manual pages for cm(4), esp(4), rc(4) and snc(4). 130861 Mon Jun 21 16:20:57 MDT 2004 trhodes Add manual pages for cm(4), esp(4), rc(4) and snc(4). 130861 Mon Jun 21 16:20:57 MDT 2004 trhodes Add manual pages for cm(4), esp(4), rc(4) and snc(4). 130861 Mon Jun 21 16:20:57 MDT 2004 trhodes Add manual pages for cm(4), esp(4), rc(4) and snc(4). |
H A D | est.4 | diff 242500 Fri Nov 02 21:41:25 MDT 2012 sbruno MFC r241710 est(4) man page update to document the exposed sysctl r/o variables available to the user. Should be applicable to all branches and versions where est(4) exists. MFC r241727 Fix minor whitespace issues. diff 242500 Fri Nov 02 21:41:25 MDT 2012 sbruno MFC r241710 est(4) man page update to document the exposed sysctl r/o variables available to the user. Should be applicable to all branches and versions where est(4) exists. MFC r241727 Fix minor whitespace issues. diff 238035 Mon Jul 02 20:03:30 MDT 2012 sbruno MFC r237245, r237250, r237251, r237273, r237330 Document support for Intel Enhanced Speedstep Tech interface of cpufreq(4) via a new man page est(4) Document the two exposed tuneables of est(4). Numerous cleanups and mdoc updates from reviewers. Thanks to mav, joel, wblock, hrs, gjb diff 238035 Mon Jul 02 20:03:30 MDT 2012 sbruno MFC r237245, r237250, r237251, r237273, r237330 Document support for Intel Enhanced Speedstep Tech interface of cpufreq(4) via a new man page est(4) Document the two exposed tuneables of est(4). Numerous cleanups and mdoc updates from reviewers. Thanks to mav, joel, wblock, hrs, gjb diff 238035 Mon Jul 02 20:03:30 MDT 2012 sbruno MFC r237245, r237250, r237251, r237273, r237330 Document support for Intel Enhanced Speedstep Tech interface of cpufreq(4) via a new man page est(4) Document the two exposed tuneables of est(4). Numerous cleanups and mdoc updates from reviewers. Thanks to mav, joel, wblock, hrs, gjb 237245 Mon Jun 18 21:27:29 MDT 2012 sbruno Document support for Intel Enhanced Speedstep Tech interface of cpufreq(4) via a new man page est(4) Document the two exposed tuneables of est(4). I'd appreciate more reviews of content if possible. I gleaned the information contained herein from sys/x86/cpufreq/est.c and the Intel reference documentation Reviewed by: wblock hrs gjb MFC after: 2 weeks 237245 Mon Jun 18 21:27:29 MDT 2012 sbruno Document support for Intel Enhanced Speedstep Tech interface of cpufreq(4) via a new man page est(4) Document the two exposed tuneables of est(4). I'd appreciate more reviews of content if possible. I gleaned the information contained herein from sys/x86/cpufreq/est.c and the Intel reference documentation Reviewed by: wblock hrs gjb MFC after: 2 weeks 237245 Mon Jun 18 21:27:29 MDT 2012 sbruno Document support for Intel Enhanced Speedstep Tech interface of cpufreq(4) via a new man page est(4) Document the two exposed tuneables of est(4). I'd appreciate more reviews of content if possible. I gleaned the information contained herein from sys/x86/cpufreq/est.c and the Intel reference documentation Reviewed by: wblock hrs gjb MFC after: 2 weeks |
H A D | filemon.4 | diff 237795 Fri Jun 29 13:58:36 MDT 2012 obrien MFC: r236592 r236593 r236594 r236620 r236621 r236622 r236637 r237794: filemon(4) 236593 Mon Jun 04 21:11:38 MDT 2012 obrien Add a man page for filemon(4) [r236592]. |
H A D | aibs.4 | diff 215010 Mon Nov 08 18:55:08 MST 2010 jhb Don't mention 'device acpi' or loading ACPI as a kernel module since the latter is not supported. This is also more consistent with manpages for other vendor-specific drivers such as acpi_ibm(4) and acpi_sony(4). diff 215010 Mon Nov 08 18:55:08 MST 2010 jhb Don't mention 'device acpi' or loading ACPI as a kernel module since the latter is not supported. This is also more consistent with manpages for other vendor-specific drivers such as acpi_ibm(4) and acpi_sony(4). 209523 Fri Jun 25 13:40:26 MDT 2010 rpaulo Import the acpi_aibs(4) driver written by Constantine A. Murenin. It has more features than acpi_aiboost(4) and it will eventually replace acpi_aiboost(4). Submitted by: Constantine A. Murenin <cnst at FreeBSD.org> Reviewed by: freebsd-acpi, imp MFC after: 1 month 209523 Fri Jun 25 13:40:26 MDT 2010 rpaulo Import the acpi_aibs(4) driver written by Constantine A. Murenin. It has more features than acpi_aiboost(4) and it will eventually replace acpi_aiboost(4). Submitted by: Constantine A. Murenin <cnst at FreeBSD.org> Reviewed by: freebsd-acpi, imp MFC after: 1 month 209523 Fri Jun 25 13:40:26 MDT 2010 rpaulo Import the acpi_aibs(4) driver written by Constantine A. Murenin. It has more features than acpi_aiboost(4) and it will eventually replace acpi_aiboost(4). Submitted by: Constantine A. Murenin <cnst at FreeBSD.org> Reviewed by: freebsd-acpi, imp MFC after: 1 month |
H A D | ixgb.4 | diff 217973 Thu Jan 27 18:08:04 MST 2011 yongari Backout r216577. ixgb(4) does not support altq(4) yet. diff 217973 Thu Jan 27 18:08:04 MST 2011 yongari Backout r216577. ixgb(4) does not support altq(4) yet. diff 216577 Sun Dec 19 22:08:02 MST 2010 yongari Add .Xr to altq(4). diff 161433 Fri Aug 18 08:22:36 MDT 2006 brueffer Use our standard section 4 SYNOPSIS layout. MFC after: 2 weeks diff 138068 Wed Nov 24 17:06:43 MST 2004 brueffer Xref polling.4 and bump .Dd MFC after: 3 days diff 138062 Wed Nov 24 16:45:46 MST 2004 brueffer Note that 4.11 will be the first 4.x based release to include this driver. Discussed with: ru diff 137929 Sat Nov 20 01:10:35 MST 2004 brueffer The ixgb(4) driver actually first appeared in 5.3 (was merged to RELENG_4 after 4.10). MFC after: 3 days diff 137408 Mon Nov 08 18:05:51 MST 2004 brueffer gx(4) is gone, reference em(4) instead diff 137408 Mon Nov 08 18:05:51 MST 2004 brueffer gx(4) is gone, reference em(4) instead 129795 Thu May 27 22:27:31 MDT 2004 tackerman Adding ixgb(4) for Intel 10GbE Adapters |
H A D | le.4 | diff 166346 Tue Jan 30 06:40:04 MST 2007 brueffer Xref altq(4) for drivers that support it according to altq(4). diff 166346 Tue Jan 30 06:40:04 MST 2007 brueffer Xref altq(4) for drivers that support it according to altq(4). diff 162005 Mon Sep 04 14:45:08 MDT 2006 marius - Talk about chips rather than chip sets as AMD LANCE and PCnet are single-chip. - Add some more rationale about le(4). - Add/un-comment hardware notes for C-Bus and ISA adapters. diff 155220 Thu Feb 02 12:57:00 MST 2006 marius Correct and improve the description of le(4) vs. pcn(4); apparently I was thinking from the pcn(4) perspective instead of the le(4) one when writing the former version as le(4) supports a superset of the chips supported by pcn(4) and not the other way round. diff 155220 Thu Feb 02 12:57:00 MST 2006 marius Correct and improve the description of le(4) vs. pcn(4); apparently I was thinking from the pcn(4) perspective instead of the le(4) one when writing the former version as le(4) supports a superset of the chips supported by pcn(4) and not the other way round. diff 155220 Thu Feb 02 12:57:00 MST 2006 marius Correct and improve the description of le(4) vs. pcn(4); apparently I was thinking from the pcn(4) perspective instead of the le(4) one when writing the former version as le(4) supports a superset of the chips supported by pcn(4) and not the other way round. diff 155220 Thu Feb 02 12:57:00 MST 2006 marius Correct and improve the description of le(4) vs. pcn(4); apparently I was thinking from the pcn(4) perspective instead of the le(4) one when writing the former version as le(4) supports a superset of the chips supported by pcn(4) and not the other way round. diff 155220 Thu Feb 02 12:57:00 MST 2006 marius Correct and improve the description of le(4) vs. pcn(4); apparently I was thinking from the pcn(4) perspective instead of the le(4) one when writing the former version as le(4) supports a superset of the chips supported by pcn(4) and not the other way round. diff 155220 Thu Feb 02 12:57:00 MST 2006 marius Correct and improve the description of le(4) vs. pcn(4); apparently I was thinking from the pcn(4) perspective instead of the le(4) one when writing the former version as le(4) supports a superset of the chips supported by pcn(4) and not the other way round. 155153 Tue Jan 31 20:40:25 MST 2006 marius Add a man page for le(4), based on the NetBSD one. |
H A D | puc.4 | diff 225200 Fri Aug 26 18:00:36 MDT 2011 jhb - Replace references to sio(4) with uart(4) instead. - We no longer use the same data structure in as NetBSD in pucdata.c. - ppc(4) has had a puc(4) attachment for a while now. Approved by: re (blackend) MFC after: 3 days diff 225200 Fri Aug 26 18:00:36 MDT 2011 jhb - Replace references to sio(4) with uart(4) instead. - We no longer use the same data structure in as NetBSD in pucdata.c. - ppc(4) has had a puc(4) attachment for a while now. Approved by: re (blackend) MFC after: 3 days diff 225200 Fri Aug 26 18:00:36 MDT 2011 jhb - Replace references to sio(4) with uart(4) instead. - We no longer use the same data structure in as NetBSD in pucdata.c. - ppc(4) has had a puc(4) attachment for a while now. Approved by: re (blackend) MFC after: 3 days diff 225200 Fri Aug 26 18:00:36 MDT 2011 jhb - Replace references to sio(4) with uart(4) instead. - We no longer use the same data structure in as NetBSD in pucdata.c. - ppc(4) has had a puc(4) attachment for a while now. Approved by: re (blackend) MFC after: 3 days diff 118292 Fri Aug 01 00:25:32 MDT 2003 ambrisko Add printer support to puc(4) driver. - Move isa/ppc* to sys/dev/ppc (repo-copy) - Add an attachment method to ppc for puc - In puc we need to walk the chain of parents. Still to do, is to make ppc(4) & puc(4) work on other platforms. Testers wanted. PR: 38372 (in spirit done differently) Verified by: Make universe (if I messed up a platform please fix) diff 118292 Fri Aug 01 00:25:32 MDT 2003 ambrisko Add printer support to puc(4) driver. - Move isa/ppc* to sys/dev/ppc (repo-copy) - Add an attachment method to ppc for puc - In puc we need to walk the chain of parents. Still to do, is to make ppc(4) & puc(4) work on other platforms. Testers wanted. PR: 38372 (in spirit done differently) Verified by: Make universe (if I messed up a platform please fix) diff 118292 Fri Aug 01 00:25:32 MDT 2003 ambrisko Add printer support to puc(4) driver. - Move isa/ppc* to sys/dev/ppc (repo-copy) - Add an attachment method to ppc for puc - In puc we need to walk the chain of parents. Still to do, is to make ppc(4) & puc(4) work on other platforms. Testers wanted. PR: 38372 (in spirit done differently) Verified by: Make universe (if I messed up a platform please fix) 90731 Sat Feb 16 13:12:14 MST 2002 jhay Add the puc (PCI "Universal" Communications) driver. The idea and some of the structure definitions come from NetBSD to make it easier to share card definitions. The driver only acts as a shim between the pci bus and the sio driver. Later pci parallel ports could also be supported through this driver. Support for most single and multiport pci serial cards should be as simple as adding its definition to pucdata.c Tested with the following pci cards: Moxa Industio CP-114, 4 port RS-232,RS-422/485 Syba Tech Ltd. PCI-4S2P-550-ECP, 4 port RS-232 + 2 parallel ports Netmos NM9835 PCI-2S-550, 2 port RS-232 90731 Sat Feb 16 13:12:14 MST 2002 jhay Add the puc (PCI "Universal" Communications) driver. The idea and some of the structure definitions come from NetBSD to make it easier to share card definitions. The driver only acts as a shim between the pci bus and the sio driver. Later pci parallel ports could also be supported through this driver. Support for most single and multiport pci serial cards should be as simple as adding its definition to pucdata.c Tested with the following pci cards: Moxa Industio CP-114, 4 port RS-232,RS-422/485 Syba Tech Ltd. PCI-4S2P-550-ECP, 4 port RS-232 + 2 parallel ports Netmos NM9835 PCI-2S-550, 2 port RS-232 90731 Sat Feb 16 13:12:14 MST 2002 jhay Add the puc (PCI "Universal" Communications) driver. The idea and some of the structure definitions come from NetBSD to make it easier to share card definitions. The driver only acts as a shim between the pci bus and the sio driver. Later pci parallel ports could also be supported through this driver. Support for most single and multiport pci serial cards should be as simple as adding its definition to pucdata.c Tested with the following pci cards: Moxa Industio CP-114, 4 port RS-232,RS-422/485 Syba Tech Ltd. PCI-4S2P-550-ECP, 4 port RS-232 + 2 parallel ports Netmos NM9835 PCI-2S-550, 2 port RS-232 |
H A D | polling.4 | diff 168427 Fri Apr 06 12:25:14 MDT 2007 brueffer nfe(4) supports polling. diff 164819 Sat Dec 02 07:03:06 MST 2006 brueffer bce(4) does not work correctly in polling(4) mode for now. diff 164819 Sat Dec 02 07:03:06 MST 2006 brueffer bce(4) does not work correctly in polling(4) mode for now. diff 160645 Mon Jul 24 22:54:58 MDT 2006 yongari Add stge(4) to the list of devices supporting polling. diff 157734 Thu Apr 13 15:44:40 MDT 2006 brueffer bce(4) does polling too. MFC after: 3 days diff 151554 Sat Oct 22 12:38:52 MDT 2005 glebius Add bge(4) to the list of supported devices. diff 144155 Sat Mar 26 18:22:58 MST 2005 ru xl(4) meets polling(4). Hardware for this work kindly provided by Eric Masson. MFC after: 3 weeks diff 144155 Sat Mar 26 18:22:58 MST 2005 ru xl(4) meets polling(4). Hardware for this work kindly provided by Eric Masson. MFC after: 3 weeks diff 138858 Tue Dec 14 17:27:16 MST 2004 brueffer fwip(4) supports polling. MFC after: 3 days diff 137559 Wed Nov 10 21:31:15 MST 2004 brueffer sf(4) supports polling now MFC after: 2 weeks |
/freebsd-9.3-release/sys/dev/esp/ | ||
H A D | am53c974reg.h | diff 227305 Mon Nov 07 11:54:31 MST 2011 marius MFC: r227006, r227281, r227282 Add a PCI front-end to esp(4) allowing it to support AMD Am53C974 and replace amd(4) with the former in the amd64, i386 and pc98 GENERIC kernel configuration files. Besides duplicating functionality, amd(4), which previously also supported the AMD Am53C974, unlike esp(4) is no longer maintained and has accumulated enough bit rot over time to always cause a panic during boot as long as at least one target is attached to it (see PR 124667). PR: 124667 Approved by: re (kib) Obtained from: NetBSD (based on) diff 227305 Mon Nov 07 11:54:31 MST 2011 marius MFC: r227006, r227281, r227282 Add a PCI front-end to esp(4) allowing it to support AMD Am53C974 and replace amd(4) with the former in the amd64, i386 and pc98 GENERIC kernel configuration files. Besides duplicating functionality, amd(4), which previously also supported the AMD Am53C974, unlike esp(4) is no longer maintained and has accumulated enough bit rot over time to always cause a panic during boot as long as at least one target is attached to it (see PR 124667). PR: 124667 Approved by: re (kib) Obtained from: NetBSD (based on) diff 227305 Mon Nov 07 11:54:31 MST 2011 marius MFC: r227006, r227281, r227282 Add a PCI front-end to esp(4) allowing it to support AMD Am53C974 and replace amd(4) with the former in the amd64, i386 and pc98 GENERIC kernel configuration files. Besides duplicating functionality, amd(4), which previously also supported the AMD Am53C974, unlike esp(4) is no longer maintained and has accumulated enough bit rot over time to always cause a panic during boot as long as at least one target is attached to it (see PR 124667). PR: 124667 Approved by: re (kib) Obtained from: NetBSD (based on) diff 227305 Mon Nov 07 11:54:31 MST 2011 marius MFC: r227006, r227281, r227282 Add a PCI front-end to esp(4) allowing it to support AMD Am53C974 and replace amd(4) with the former in the amd64, i386 and pc98 GENERIC kernel configuration files. Besides duplicating functionality, amd(4), which previously also supported the AMD Am53C974, unlike esp(4) is no longer maintained and has accumulated enough bit rot over time to always cause a panic during boot as long as at least one target is attached to it (see PR 124667). PR: 124667 Approved by: re (kib) Obtained from: NetBSD (based on) 227006 Tue Nov 01 19:40:00 MDT 2011 marius Add a PCI front-end to esp(4) allowing it to support AMD Am53C974 and replace amd(4) with the former in the amd64, i386 and pc98 GENERIC kernel configuration files. Besides duplicating functionality, amd(4), which previously also supported the AMD Am53C974, unlike esp(4) is no longer maintained and has accumulated enough bit rot over time to always cause a panic during boot as long as at least one target is attached to it (see PR 124667). PR: 124667 Obtained from: NetBSD (based on) MFC after: 3 days 227006 Tue Nov 01 19:40:00 MDT 2011 marius Add a PCI front-end to esp(4) allowing it to support AMD Am53C974 and replace amd(4) with the former in the amd64, i386 and pc98 GENERIC kernel configuration files. Besides duplicating functionality, amd(4), which previously also supported the AMD Am53C974, unlike esp(4) is no longer maintained and has accumulated enough bit rot over time to always cause a panic during boot as long as at least one target is attached to it (see PR 124667). PR: 124667 Obtained from: NetBSD (based on) MFC after: 3 days 227006 Tue Nov 01 19:40:00 MDT 2011 marius Add a PCI front-end to esp(4) allowing it to support AMD Am53C974 and replace amd(4) with the former in the amd64, i386 and pc98 GENERIC kernel configuration files. Besides duplicating functionality, amd(4), which previously also supported the AMD Am53C974, unlike esp(4) is no longer maintained and has accumulated enough bit rot over time to always cause a panic during boot as long as at least one target is attached to it (see PR 124667). PR: 124667 Obtained from: NetBSD (based on) MFC after: 3 days 227006 Tue Nov 01 19:40:00 MDT 2011 marius Add a PCI front-end to esp(4) allowing it to support AMD Am53C974 and replace amd(4) with the former in the amd64, i386 and pc98 GENERIC kernel configuration files. Besides duplicating functionality, amd(4), which previously also supported the AMD Am53C974, unlike esp(4) is no longer maintained and has accumulated enough bit rot over time to always cause a panic during boot as long as at least one target is attached to it (see PR 124667). PR: 124667 Obtained from: NetBSD (based on) MFC after: 3 days |
H A D | esp_pci.c | diff 227305 Mon Nov 07 11:54:31 MST 2011 marius MFC: r227006, r227281, r227282 Add a PCI front-end to esp(4) allowing it to support AMD Am53C974 and replace amd(4) with the former in the amd64, i386 and pc98 GENERIC kernel configuration files. Besides duplicating functionality, amd(4), which previously also supported the AMD Am53C974, unlike esp(4) is no longer maintained and has accumulated enough bit rot over time to always cause a panic during boot as long as at least one target is attached to it (see PR 124667). PR: 124667 Approved by: re (kib) Obtained from: NetBSD (based on) diff 227305 Mon Nov 07 11:54:31 MST 2011 marius MFC: r227006, r227281, r227282 Add a PCI front-end to esp(4) allowing it to support AMD Am53C974 and replace amd(4) with the former in the amd64, i386 and pc98 GENERIC kernel configuration files. Besides duplicating functionality, amd(4), which previously also supported the AMD Am53C974, unlike esp(4) is no longer maintained and has accumulated enough bit rot over time to always cause a panic during boot as long as at least one target is attached to it (see PR 124667). PR: 124667 Approved by: re (kib) Obtained from: NetBSD (based on) diff 227305 Mon Nov 07 11:54:31 MST 2011 marius MFC: r227006, r227281, r227282 Add a PCI front-end to esp(4) allowing it to support AMD Am53C974 and replace amd(4) with the former in the amd64, i386 and pc98 GENERIC kernel configuration files. Besides duplicating functionality, amd(4), which previously also supported the AMD Am53C974, unlike esp(4) is no longer maintained and has accumulated enough bit rot over time to always cause a panic during boot as long as at least one target is attached to it (see PR 124667). PR: 124667 Approved by: re (kib) Obtained from: NetBSD (based on) diff 227305 Mon Nov 07 11:54:31 MST 2011 marius MFC: r227006, r227281, r227282 Add a PCI front-end to esp(4) allowing it to support AMD Am53C974 and replace amd(4) with the former in the amd64, i386 and pc98 GENERIC kernel configuration files. Besides duplicating functionality, amd(4), which previously also supported the AMD Am53C974, unlike esp(4) is no longer maintained and has accumulated enough bit rot over time to always cause a panic during boot as long as at least one target is attached to it (see PR 124667). PR: 124667 Approved by: re (kib) Obtained from: NetBSD (based on) 227006 Tue Nov 01 19:40:00 MDT 2011 marius Add a PCI front-end to esp(4) allowing it to support AMD Am53C974 and replace amd(4) with the former in the amd64, i386 and pc98 GENERIC kernel configuration files. Besides duplicating functionality, amd(4), which previously also supported the AMD Am53C974, unlike esp(4) is no longer maintained and has accumulated enough bit rot over time to always cause a panic during boot as long as at least one target is attached to it (see PR 124667). PR: 124667 Obtained from: NetBSD (based on) MFC after: 3 days 227006 Tue Nov 01 19:40:00 MDT 2011 marius Add a PCI front-end to esp(4) allowing it to support AMD Am53C974 and replace amd(4) with the former in the amd64, i386 and pc98 GENERIC kernel configuration files. Besides duplicating functionality, amd(4), which previously also supported the AMD Am53C974, unlike esp(4) is no longer maintained and has accumulated enough bit rot over time to always cause a panic during boot as long as at least one target is attached to it (see PR 124667). PR: 124667 Obtained from: NetBSD (based on) MFC after: 3 days 227006 Tue Nov 01 19:40:00 MDT 2011 marius Add a PCI front-end to esp(4) allowing it to support AMD Am53C974 and replace amd(4) with the former in the amd64, i386 and pc98 GENERIC kernel configuration files. Besides duplicating functionality, amd(4), which previously also supported the AMD Am53C974, unlike esp(4) is no longer maintained and has accumulated enough bit rot over time to always cause a panic during boot as long as at least one target is attached to it (see PR 124667). PR: 124667 Obtained from: NetBSD (based on) MFC after: 3 days 227006 Tue Nov 01 19:40:00 MDT 2011 marius Add a PCI front-end to esp(4) allowing it to support AMD Am53C974 and replace amd(4) with the former in the amd64, i386 and pc98 GENERIC kernel configuration files. Besides duplicating functionality, amd(4), which previously also supported the AMD Am53C974, unlike esp(4) is no longer maintained and has accumulated enough bit rot over time to always cause a panic during boot as long as at least one target is attached to it (see PR 124667). PR: 124667 Obtained from: NetBSD (based on) MFC after: 3 days |
/freebsd-9.3-release/sys/modules/scc/ | ||
H A D | Makefile | diff 232324 Wed Feb 29 22:25:43 MST 2012 jhibbits MFC r232176: Fix the scc(4) module build. Without the file it's missing a required symbol. Approved by: nwhitehorn (mentor) diff 157353 Sat Apr 01 02:54:47 MST 2006 marcel Build the scc(4) module with EBus and SBus attachments for sparc64 only and build the scc(4) module with MacIO attachment for powerpc. diff 157353 Sat Apr 01 02:54:47 MST 2006 marcel Build the scc(4) module with EBus and SBus attachments for sparc64 only and build the scc(4) module with MacIO attachment for powerpc. 157299 Thu Mar 30 16:33:22 MST 2006 marcel Add scc(4), a driver for serial communications controllers. These controllers typically have multiple channels and support a number of serial communications protocols. The scc(4) driver is itself an umbrella driver that delegates the control over each channel and mode to a subordinate driver (like uart(4)). The scc(4) driver supports the Siemens SAB 82532 and the Zilog Z8530 and replaces puc(4) for these devices. 157299 Thu Mar 30 16:33:22 MST 2006 marcel Add scc(4), a driver for serial communications controllers. These controllers typically have multiple channels and support a number of serial communications protocols. The scc(4) driver is itself an umbrella driver that delegates the control over each channel and mode to a subordinate driver (like uart(4)). The scc(4) driver supports the Siemens SAB 82532 and the Zilog Z8530 and replaces puc(4) for these devices. 157299 Thu Mar 30 16:33:22 MST 2006 marcel Add scc(4), a driver for serial communications controllers. These controllers typically have multiple channels and support a number of serial communications protocols. The scc(4) driver is itself an umbrella driver that delegates the control over each channel and mode to a subordinate driver (like uart(4)). The scc(4) driver supports the Siemens SAB 82532 and the Zilog Z8530 and replaces puc(4) for these devices. 157299 Thu Mar 30 16:33:22 MST 2006 marcel Add scc(4), a driver for serial communications controllers. These controllers typically have multiple channels and support a number of serial communications protocols. The scc(4) driver is itself an umbrella driver that delegates the control over each channel and mode to a subordinate driver (like uart(4)). The scc(4) driver supports the Siemens SAB 82532 and the Zilog Z8530 and replaces puc(4) for these devices. 157299 Thu Mar 30 16:33:22 MST 2006 marcel Add scc(4), a driver for serial communications controllers. These controllers typically have multiple channels and support a number of serial communications protocols. The scc(4) driver is itself an umbrella driver that delegates the control over each channel and mode to a subordinate driver (like uart(4)). The scc(4) driver supports the Siemens SAB 82532 and the Zilog Z8530 and replaces puc(4) for these devices. |
/freebsd-9.3-release/sys/modules/usb/rue/ | ||
H A D | Makefile | diff 227229 Sun Nov 06 15:35:41 MST 2011 marius MFC: r226154, r226165 - Follow the lead of dcphy(4) and pnphy(4) and move the reminder of the PHY drivers that only ever attach to a particular MAC driver, i.e. inphy(4), ruephy(4) and xlphy(4), to the directory where the respective MAC driver lives and only compile it into the kernel when the latter is also there, also removing it from miibus.ko and moving it into the module of the respective MAC driver. - While at it, rename exphy.c, which comes from NetBSD where the MAC driver it corresponds to also is named ex(4) instead of xl(4) but that in FreeBSD actually identifies itself as xlphy(4), and its function names accordingly for consistency. - Additionally while at it, fix some minor style issues like whitespace in the register headers and add multi-inclusion protection to inphyreg.h. Approved by: re (kib) diff 227229 Sun Nov 06 15:35:41 MST 2011 marius MFC: r226154, r226165 - Follow the lead of dcphy(4) and pnphy(4) and move the reminder of the PHY drivers that only ever attach to a particular MAC driver, i.e. inphy(4), ruephy(4) and xlphy(4), to the directory where the respective MAC driver lives and only compile it into the kernel when the latter is also there, also removing it from miibus.ko and moving it into the module of the respective MAC driver. - While at it, rename exphy.c, which comes from NetBSD where the MAC driver it corresponds to also is named ex(4) instead of xl(4) but that in FreeBSD actually identifies itself as xlphy(4), and its function names accordingly for consistency. - Additionally while at it, fix some minor style issues like whitespace in the register headers and add multi-inclusion protection to inphyreg.h. Approved by: re (kib) diff 227229 Sun Nov 06 15:35:41 MST 2011 marius MFC: r226154, r226165 - Follow the lead of dcphy(4) and pnphy(4) and move the reminder of the PHY drivers that only ever attach to a particular MAC driver, i.e. inphy(4), ruephy(4) and xlphy(4), to the directory where the respective MAC driver lives and only compile it into the kernel when the latter is also there, also removing it from miibus.ko and moving it into the module of the respective MAC driver. - While at it, rename exphy.c, which comes from NetBSD where the MAC driver it corresponds to also is named ex(4) instead of xl(4) but that in FreeBSD actually identifies itself as xlphy(4), and its function names accordingly for consistency. - Additionally while at it, fix some minor style issues like whitespace in the register headers and add multi-inclusion protection to inphyreg.h. Approved by: re (kib) diff 227229 Sun Nov 06 15:35:41 MST 2011 marius MFC: r226154, r226165 - Follow the lead of dcphy(4) and pnphy(4) and move the reminder of the PHY drivers that only ever attach to a particular MAC driver, i.e. inphy(4), ruephy(4) and xlphy(4), to the directory where the respective MAC driver lives and only compile it into the kernel when the latter is also there, also removing it from miibus.ko and moving it into the module of the respective MAC driver. - While at it, rename exphy.c, which comes from NetBSD where the MAC driver it corresponds to also is named ex(4) instead of xl(4) but that in FreeBSD actually identifies itself as xlphy(4), and its function names accordingly for consistency. - Additionally while at it, fix some minor style issues like whitespace in the register headers and add multi-inclusion protection to inphyreg.h. Approved by: re (kib) diff 227229 Sun Nov 06 15:35:41 MST 2011 marius MFC: r226154, r226165 - Follow the lead of dcphy(4) and pnphy(4) and move the reminder of the PHY drivers that only ever attach to a particular MAC driver, i.e. inphy(4), ruephy(4) and xlphy(4), to the directory where the respective MAC driver lives and only compile it into the kernel when the latter is also there, also removing it from miibus.ko and moving it into the module of the respective MAC driver. - While at it, rename exphy.c, which comes from NetBSD where the MAC driver it corresponds to also is named ex(4) instead of xl(4) but that in FreeBSD actually identifies itself as xlphy(4), and its function names accordingly for consistency. - Additionally while at it, fix some minor style issues like whitespace in the register headers and add multi-inclusion protection to inphyreg.h. Approved by: re (kib) diff 227229 Sun Nov 06 15:35:41 MST 2011 marius MFC: r226154, r226165 - Follow the lead of dcphy(4) and pnphy(4) and move the reminder of the PHY drivers that only ever attach to a particular MAC driver, i.e. inphy(4), ruephy(4) and xlphy(4), to the directory where the respective MAC driver lives and only compile it into the kernel when the latter is also there, also removing it from miibus.ko and moving it into the module of the respective MAC driver. - While at it, rename exphy.c, which comes from NetBSD where the MAC driver it corresponds to also is named ex(4) instead of xl(4) but that in FreeBSD actually identifies itself as xlphy(4), and its function names accordingly for consistency. - Additionally while at it, fix some minor style issues like whitespace in the register headers and add multi-inclusion protection to inphyreg.h. Approved by: re (kib) diff 227229 Sun Nov 06 15:35:41 MST 2011 marius MFC: r226154, r226165 - Follow the lead of dcphy(4) and pnphy(4) and move the reminder of the PHY drivers that only ever attach to a particular MAC driver, i.e. inphy(4), ruephy(4) and xlphy(4), to the directory where the respective MAC driver lives and only compile it into the kernel when the latter is also there, also removing it from miibus.ko and moving it into the module of the respective MAC driver. - While at it, rename exphy.c, which comes from NetBSD where the MAC driver it corresponds to also is named ex(4) instead of xl(4) but that in FreeBSD actually identifies itself as xlphy(4), and its function names accordingly for consistency. - Additionally while at it, fix some minor style issues like whitespace in the register headers and add multi-inclusion protection to inphyreg.h. Approved by: re (kib) diff 227229 Sun Nov 06 15:35:41 MST 2011 marius MFC: r226154, r226165 - Follow the lead of dcphy(4) and pnphy(4) and move the reminder of the PHY drivers that only ever attach to a particular MAC driver, i.e. inphy(4), ruephy(4) and xlphy(4), to the directory where the respective MAC driver lives and only compile it into the kernel when the latter is also there, also removing it from miibus.ko and moving it into the module of the respective MAC driver. - While at it, rename exphy.c, which comes from NetBSD where the MAC driver it corresponds to also is named ex(4) instead of xl(4) but that in FreeBSD actually identifies itself as xlphy(4), and its function names accordingly for consistency. - Additionally while at it, fix some minor style issues like whitespace in the register headers and add multi-inclusion protection to inphyreg.h. Approved by: re (kib) |
/freebsd-9.3-release/sys/pci/ | ||
H A D | nfsmb.c | diff 165951 Thu Jan 11 17:56:24 MST 2007 jhb Various updates to most of the smbus(4) drivers: - Use printf() and device_printf() instead of log() in ichsmb(4). - Create the mutex sooner during ichsmb(4) attach. - Attach the interrupt handler later during ichsmb(4) attach to avoid races. - Don't try to set PCIM_CMD_PORTEN in ichsmb(4) attach as the PCI bus driver does this already. - Add locking to alpm(4), amdpm(4), amdsmb(4), intsmb(4), nfsmb(4), and viapm(4). - Axe ALPM_SMBIO_BASE_ADDR, it's not really safe to write arbitrary values into BARs, and the PCI bus layer will allocate resources now if needed. - Merge intpm(4) and intsmb(4) into just intsmb(4). Previously, intpm(4) attached to the PCI device and created an intsmb(4) child. Now, intsmb(4) just attaches to PCI directly. - Change several intsmb functions to take a softc instead of a device_t to make things simpler. diff 165951 Thu Jan 11 17:56:24 MST 2007 jhb Various updates to most of the smbus(4) drivers: - Use printf() and device_printf() instead of log() in ichsmb(4). - Create the mutex sooner during ichsmb(4) attach. - Attach the interrupt handler later during ichsmb(4) attach to avoid races. - Don't try to set PCIM_CMD_PORTEN in ichsmb(4) attach as the PCI bus driver does this already. - Add locking to alpm(4), amdpm(4), amdsmb(4), intsmb(4), nfsmb(4), and viapm(4). - Axe ALPM_SMBIO_BASE_ADDR, it's not really safe to write arbitrary values into BARs, and the PCI bus layer will allocate resources now if needed. - Merge intpm(4) and intsmb(4) into just intsmb(4). Previously, intpm(4) attached to the PCI device and created an intsmb(4) child. Now, intsmb(4) just attaches to PCI directly. - Change several intsmb functions to take a softc instead of a device_t to make things simpler. diff 165951 Thu Jan 11 17:56:24 MST 2007 jhb Various updates to most of the smbus(4) drivers: - Use printf() and device_printf() instead of log() in ichsmb(4). - Create the mutex sooner during ichsmb(4) attach. - Attach the interrupt handler later during ichsmb(4) attach to avoid races. - Don't try to set PCIM_CMD_PORTEN in ichsmb(4) attach as the PCI bus driver does this already. - Add locking to alpm(4), amdpm(4), amdsmb(4), intsmb(4), nfsmb(4), and viapm(4). - Axe ALPM_SMBIO_BASE_ADDR, it's not really safe to write arbitrary values into BARs, and the PCI bus layer will allocate resources now if needed. - Merge intpm(4) and intsmb(4) into just intsmb(4). Previously, intpm(4) attached to the PCI device and created an intsmb(4) child. Now, intsmb(4) just attaches to PCI directly. - Change several intsmb functions to take a softc instead of a device_t to make things simpler. diff 165951 Thu Jan 11 17:56:24 MST 2007 jhb Various updates to most of the smbus(4) drivers: - Use printf() and device_printf() instead of log() in ichsmb(4). - Create the mutex sooner during ichsmb(4) attach. - Attach the interrupt handler later during ichsmb(4) attach to avoid races. - Don't try to set PCIM_CMD_PORTEN in ichsmb(4) attach as the PCI bus driver does this already. - Add locking to alpm(4), amdpm(4), amdsmb(4), intsmb(4), nfsmb(4), and viapm(4). - Axe ALPM_SMBIO_BASE_ADDR, it's not really safe to write arbitrary values into BARs, and the PCI bus layer will allocate resources now if needed. - Merge intpm(4) and intsmb(4) into just intsmb(4). Previously, intpm(4) attached to the PCI device and created an intsmb(4) child. Now, intsmb(4) just attaches to PCI directly. - Change several intsmb functions to take a softc instead of a device_t to make things simpler. diff 165951 Thu Jan 11 17:56:24 MST 2007 jhb Various updates to most of the smbus(4) drivers: - Use printf() and device_printf() instead of log() in ichsmb(4). - Create the mutex sooner during ichsmb(4) attach. - Attach the interrupt handler later during ichsmb(4) attach to avoid races. - Don't try to set PCIM_CMD_PORTEN in ichsmb(4) attach as the PCI bus driver does this already. - Add locking to alpm(4), amdpm(4), amdsmb(4), intsmb(4), nfsmb(4), and viapm(4). - Axe ALPM_SMBIO_BASE_ADDR, it's not really safe to write arbitrary values into BARs, and the PCI bus layer will allocate resources now if needed. - Merge intpm(4) and intsmb(4) into just intsmb(4). Previously, intpm(4) attached to the PCI device and created an intsmb(4) child. Now, intsmb(4) just attaches to PCI directly. - Change several intsmb functions to take a softc instead of a device_t to make things simpler. diff 165951 Thu Jan 11 17:56:24 MST 2007 jhb Various updates to most of the smbus(4) drivers: - Use printf() and device_printf() instead of log() in ichsmb(4). - Create the mutex sooner during ichsmb(4) attach. - Attach the interrupt handler later during ichsmb(4) attach to avoid races. - Don't try to set PCIM_CMD_PORTEN in ichsmb(4) attach as the PCI bus driver does this already. - Add locking to alpm(4), amdpm(4), amdsmb(4), intsmb(4), nfsmb(4), and viapm(4). - Axe ALPM_SMBIO_BASE_ADDR, it's not really safe to write arbitrary values into BARs, and the PCI bus layer will allocate resources now if needed. - Merge intpm(4) and intsmb(4) into just intsmb(4). Previously, intpm(4) attached to the PCI device and created an intsmb(4) child. Now, intsmb(4) just attaches to PCI directly. - Change several intsmb functions to take a softc instead of a device_t to make things simpler. diff 165951 Thu Jan 11 17:56:24 MST 2007 jhb Various updates to most of the smbus(4) drivers: - Use printf() and device_printf() instead of log() in ichsmb(4). - Create the mutex sooner during ichsmb(4) attach. - Attach the interrupt handler later during ichsmb(4) attach to avoid races. - Don't try to set PCIM_CMD_PORTEN in ichsmb(4) attach as the PCI bus driver does this already. - Add locking to alpm(4), amdpm(4), amdsmb(4), intsmb(4), nfsmb(4), and viapm(4). - Axe ALPM_SMBIO_BASE_ADDR, it's not really safe to write arbitrary values into BARs, and the PCI bus layer will allocate resources now if needed. - Merge intpm(4) and intsmb(4) into just intsmb(4). Previously, intpm(4) attached to the PCI device and created an intsmb(4) child. Now, intsmb(4) just attaches to PCI directly. - Change several intsmb functions to take a softc instead of a device_t to make things simpler. diff 165951 Thu Jan 11 17:56:24 MST 2007 jhb Various updates to most of the smbus(4) drivers: - Use printf() and device_printf() instead of log() in ichsmb(4). - Create the mutex sooner during ichsmb(4) attach. - Attach the interrupt handler later during ichsmb(4) attach to avoid races. - Don't try to set PCIM_CMD_PORTEN in ichsmb(4) attach as the PCI bus driver does this already. - Add locking to alpm(4), amdpm(4), amdsmb(4), intsmb(4), nfsmb(4), and viapm(4). - Axe ALPM_SMBIO_BASE_ADDR, it's not really safe to write arbitrary values into BARs, and the PCI bus layer will allocate resources now if needed. - Merge intpm(4) and intsmb(4) into just intsmb(4). Previously, intpm(4) attached to the PCI device and created an intsmb(4) child. Now, intsmb(4) just attaches to PCI directly. - Change several intsmb functions to take a softc instead of a device_t to make things simpler. diff 165951 Thu Jan 11 17:56:24 MST 2007 jhb Various updates to most of the smbus(4) drivers: - Use printf() and device_printf() instead of log() in ichsmb(4). - Create the mutex sooner during ichsmb(4) attach. - Attach the interrupt handler later during ichsmb(4) attach to avoid races. - Don't try to set PCIM_CMD_PORTEN in ichsmb(4) attach as the PCI bus driver does this already. - Add locking to alpm(4), amdpm(4), amdsmb(4), intsmb(4), nfsmb(4), and viapm(4). - Axe ALPM_SMBIO_BASE_ADDR, it's not really safe to write arbitrary values into BARs, and the PCI bus layer will allocate resources now if needed. - Merge intpm(4) and intsmb(4) into just intsmb(4). Previously, intpm(4) attached to the PCI device and created an intsmb(4) child. Now, intsmb(4) just attaches to PCI directly. - Change several intsmb functions to take a softc instead of a device_t to make things simpler. diff 165951 Thu Jan 11 17:56:24 MST 2007 jhb Various updates to most of the smbus(4) drivers: - Use printf() and device_printf() instead of log() in ichsmb(4). - Create the mutex sooner during ichsmb(4) attach. - Attach the interrupt handler later during ichsmb(4) attach to avoid races. - Don't try to set PCIM_CMD_PORTEN in ichsmb(4) attach as the PCI bus driver does this already. - Add locking to alpm(4), amdpm(4), amdsmb(4), intsmb(4), nfsmb(4), and viapm(4). - Axe ALPM_SMBIO_BASE_ADDR, it's not really safe to write arbitrary values into BARs, and the PCI bus layer will allocate resources now if needed. - Merge intpm(4) and intsmb(4) into just intsmb(4). Previously, intpm(4) attached to the PCI device and created an intsmb(4) child. Now, intsmb(4) just attaches to PCI directly. - Change several intsmb functions to take a softc instead of a device_t to make things simpler. diff 165951 Thu Jan 11 17:56:24 MST 2007 jhb Various updates to most of the smbus(4) drivers: - Use printf() and device_printf() instead of log() in ichsmb(4). - Create the mutex sooner during ichsmb(4) attach. - Attach the interrupt handler later during ichsmb(4) attach to avoid races. - Don't try to set PCIM_CMD_PORTEN in ichsmb(4) attach as the PCI bus driver does this already. - Add locking to alpm(4), amdpm(4), amdsmb(4), intsmb(4), nfsmb(4), and viapm(4). - Axe ALPM_SMBIO_BASE_ADDR, it's not really safe to write arbitrary values into BARs, and the PCI bus layer will allocate resources now if needed. - Merge intpm(4) and intsmb(4) into just intsmb(4). Previously, intpm(4) attached to the PCI device and created an intsmb(4) child. Now, intsmb(4) just attaches to PCI directly. - Change several intsmb functions to take a softc instead of a device_t to make things simpler. diff 165951 Thu Jan 11 17:56:24 MST 2007 jhb Various updates to most of the smbus(4) drivers: - Use printf() and device_printf() instead of log() in ichsmb(4). - Create the mutex sooner during ichsmb(4) attach. - Attach the interrupt handler later during ichsmb(4) attach to avoid races. - Don't try to set PCIM_CMD_PORTEN in ichsmb(4) attach as the PCI bus driver does this already. - Add locking to alpm(4), amdpm(4), amdsmb(4), intsmb(4), nfsmb(4), and viapm(4). - Axe ALPM_SMBIO_BASE_ADDR, it's not really safe to write arbitrary values into BARs, and the PCI bus layer will allocate resources now if needed. - Merge intpm(4) and intsmb(4) into just intsmb(4). Previously, intpm(4) attached to the PCI device and created an intsmb(4) child. Now, intsmb(4) just attaches to PCI directly. - Change several intsmb functions to take a softc instead of a device_t to make things simpler. diff 165951 Thu Jan 11 17:56:24 MST 2007 jhb Various updates to most of the smbus(4) drivers: - Use printf() and device_printf() instead of log() in ichsmb(4). - Create the mutex sooner during ichsmb(4) attach. - Attach the interrupt handler later during ichsmb(4) attach to avoid races. - Don't try to set PCIM_CMD_PORTEN in ichsmb(4) attach as the PCI bus driver does this already. - Add locking to alpm(4), amdpm(4), amdsmb(4), intsmb(4), nfsmb(4), and viapm(4). - Axe ALPM_SMBIO_BASE_ADDR, it's not really safe to write arbitrary values into BARs, and the PCI bus layer will allocate resources now if needed. - Merge intpm(4) and intsmb(4) into just intsmb(4). Previously, intpm(4) attached to the PCI device and created an intsmb(4) child. Now, intsmb(4) just attaches to PCI directly. - Change several intsmb functions to take a softc instead of a device_t to make things simpler. diff 165951 Thu Jan 11 17:56:24 MST 2007 jhb Various updates to most of the smbus(4) drivers: - Use printf() and device_printf() instead of log() in ichsmb(4). - Create the mutex sooner during ichsmb(4) attach. - Attach the interrupt handler later during ichsmb(4) attach to avoid races. - Don't try to set PCIM_CMD_PORTEN in ichsmb(4) attach as the PCI bus driver does this already. - Add locking to alpm(4), amdpm(4), amdsmb(4), intsmb(4), nfsmb(4), and viapm(4). - Axe ALPM_SMBIO_BASE_ADDR, it's not really safe to write arbitrary values into BARs, and the PCI bus layer will allocate resources now if needed. - Merge intpm(4) and intsmb(4) into just intsmb(4). Previously, intpm(4) attached to the PCI device and created an intsmb(4) child. Now, intsmb(4) just attaches to PCI directly. - Change several intsmb functions to take a softc instead of a device_t to make things simpler. diff 165951 Thu Jan 11 17:56:24 MST 2007 jhb Various updates to most of the smbus(4) drivers: - Use printf() and device_printf() instead of log() in ichsmb(4). - Create the mutex sooner during ichsmb(4) attach. - Attach the interrupt handler later during ichsmb(4) attach to avoid races. - Don't try to set PCIM_CMD_PORTEN in ichsmb(4) attach as the PCI bus driver does this already. - Add locking to alpm(4), amdpm(4), amdsmb(4), intsmb(4), nfsmb(4), and viapm(4). - Axe ALPM_SMBIO_BASE_ADDR, it's not really safe to write arbitrary values into BARs, and the PCI bus layer will allocate resources now if needed. - Merge intpm(4) and intsmb(4) into just intsmb(4). Previously, intpm(4) attached to the PCI device and created an intsmb(4) child. Now, intsmb(4) just attaches to PCI directly. - Change several intsmb functions to take a softc instead of a device_t to make things simpler. diff 165951 Thu Jan 11 17:56:24 MST 2007 jhb Various updates to most of the smbus(4) drivers: - Use printf() and device_printf() instead of log() in ichsmb(4). - Create the mutex sooner during ichsmb(4) attach. - Attach the interrupt handler later during ichsmb(4) attach to avoid races. - Don't try to set PCIM_CMD_PORTEN in ichsmb(4) attach as the PCI bus driver does this already. - Add locking to alpm(4), amdpm(4), amdsmb(4), intsmb(4), nfsmb(4), and viapm(4). - Axe ALPM_SMBIO_BASE_ADDR, it's not really safe to write arbitrary values into BARs, and the PCI bus layer will allocate resources now if needed. - Merge intpm(4) and intsmb(4) into just intsmb(4). Previously, intpm(4) attached to the PCI device and created an intsmb(4) child. Now, intsmb(4) just attaches to PCI directly. - Change several intsmb functions to take a softc instead of a device_t to make things simpler. diff 165951 Thu Jan 11 17:56:24 MST 2007 jhb Various updates to most of the smbus(4) drivers: - Use printf() and device_printf() instead of log() in ichsmb(4). - Create the mutex sooner during ichsmb(4) attach. - Attach the interrupt handler later during ichsmb(4) attach to avoid races. - Don't try to set PCIM_CMD_PORTEN in ichsmb(4) attach as the PCI bus driver does this already. - Add locking to alpm(4), amdpm(4), amdsmb(4), intsmb(4), nfsmb(4), and viapm(4). - Axe ALPM_SMBIO_BASE_ADDR, it's not really safe to write arbitrary values into BARs, and the PCI bus layer will allocate resources now if needed. - Merge intpm(4) and intsmb(4) into just intsmb(4). Previously, intpm(4) attached to the PCI device and created an intsmb(4) child. Now, intsmb(4) just attaches to PCI directly. - Change several intsmb functions to take a softc instead of a device_t to make things simpler. |
H A D | viapm.c | diff 181303 Mon Aug 04 19:02:46 MDT 2008 jhb Add locking to the various iicbus(4) bridge drivers: - Just grab Giant in the ixp425_iic(4) driver since this driver uses a shared address/data register window pair to access the actual I2C registers. None of the other ixp425 drivers lock access to these shared address/data registers yet and that would need to be done before this could use any meaningful locking. - Add locking to the interrupt handler and 'iicbus_reset' methods of the at91_twi(4) driver. - Add locking to the pcf(4) driver. Other pcf(4) fixes include: - Don't needlessly zero the softc. - Use bus_foo rather than bus_space_foo and remove bus space tag and handle from softc. - The lpbb(4) driver just grabs Giant for now. This will be refined later when ppbus(4) is locked. - As was done with smbus earlier, move the DRIVER_MODULE() lines to match the bus driver (either iicbus or iicbb) to the bridge driver into the bridge drivers. Tested by: sam (arm/ixp425) diff 181303 Mon Aug 04 19:02:46 MDT 2008 jhb Add locking to the various iicbus(4) bridge drivers: - Just grab Giant in the ixp425_iic(4) driver since this driver uses a shared address/data register window pair to access the actual I2C registers. None of the other ixp425 drivers lock access to these shared address/data registers yet and that would need to be done before this could use any meaningful locking. - Add locking to the interrupt handler and 'iicbus_reset' methods of the at91_twi(4) driver. - Add locking to the pcf(4) driver. Other pcf(4) fixes include: - Don't needlessly zero the softc. - Use bus_foo rather than bus_space_foo and remove bus space tag and handle from softc. - The lpbb(4) driver just grabs Giant for now. This will be refined later when ppbus(4) is locked. - As was done with smbus earlier, move the DRIVER_MODULE() lines to match the bus driver (either iicbus or iicbb) to the bridge driver into the bridge drivers. Tested by: sam (arm/ixp425) diff 181303 Mon Aug 04 19:02:46 MDT 2008 jhb Add locking to the various iicbus(4) bridge drivers: - Just grab Giant in the ixp425_iic(4) driver since this driver uses a shared address/data register window pair to access the actual I2C registers. None of the other ixp425 drivers lock access to these shared address/data registers yet and that would need to be done before this could use any meaningful locking. - Add locking to the interrupt handler and 'iicbus_reset' methods of the at91_twi(4) driver. - Add locking to the pcf(4) driver. Other pcf(4) fixes include: - Don't needlessly zero the softc. - Use bus_foo rather than bus_space_foo and remove bus space tag and handle from softc. - The lpbb(4) driver just grabs Giant for now. This will be refined later when ppbus(4) is locked. - As was done with smbus earlier, move the DRIVER_MODULE() lines to match the bus driver (either iicbus or iicbb) to the bridge driver into the bridge drivers. Tested by: sam (arm/ixp425) diff 181303 Mon Aug 04 19:02:46 MDT 2008 jhb Add locking to the various iicbus(4) bridge drivers: - Just grab Giant in the ixp425_iic(4) driver since this driver uses a shared address/data register window pair to access the actual I2C registers. None of the other ixp425 drivers lock access to these shared address/data registers yet and that would need to be done before this could use any meaningful locking. - Add locking to the interrupt handler and 'iicbus_reset' methods of the at91_twi(4) driver. - Add locking to the pcf(4) driver. Other pcf(4) fixes include: - Don't needlessly zero the softc. - Use bus_foo rather than bus_space_foo and remove bus space tag and handle from softc. - The lpbb(4) driver just grabs Giant for now. This will be refined later when ppbus(4) is locked. - As was done with smbus earlier, move the DRIVER_MODULE() lines to match the bus driver (either iicbus or iicbb) to the bridge driver into the bridge drivers. Tested by: sam (arm/ixp425) diff 181303 Mon Aug 04 19:02:46 MDT 2008 jhb Add locking to the various iicbus(4) bridge drivers: - Just grab Giant in the ixp425_iic(4) driver since this driver uses a shared address/data register window pair to access the actual I2C registers. None of the other ixp425 drivers lock access to these shared address/data registers yet and that would need to be done before this could use any meaningful locking. - Add locking to the interrupt handler and 'iicbus_reset' methods of the at91_twi(4) driver. - Add locking to the pcf(4) driver. Other pcf(4) fixes include: - Don't needlessly zero the softc. - Use bus_foo rather than bus_space_foo and remove bus space tag and handle from softc. - The lpbb(4) driver just grabs Giant for now. This will be refined later when ppbus(4) is locked. - As was done with smbus earlier, move the DRIVER_MODULE() lines to match the bus driver (either iicbus or iicbb) to the bridge driver into the bridge drivers. Tested by: sam (arm/ixp425) diff 181303 Mon Aug 04 19:02:46 MDT 2008 jhb Add locking to the various iicbus(4) bridge drivers: - Just grab Giant in the ixp425_iic(4) driver since this driver uses a shared address/data register window pair to access the actual I2C registers. None of the other ixp425 drivers lock access to these shared address/data registers yet and that would need to be done before this could use any meaningful locking. - Add locking to the interrupt handler and 'iicbus_reset' methods of the at91_twi(4) driver. - Add locking to the pcf(4) driver. Other pcf(4) fixes include: - Don't needlessly zero the softc. - Use bus_foo rather than bus_space_foo and remove bus space tag and handle from softc. - The lpbb(4) driver just grabs Giant for now. This will be refined later when ppbus(4) is locked. - As was done with smbus earlier, move the DRIVER_MODULE() lines to match the bus driver (either iicbus or iicbb) to the bridge driver into the bridge drivers. Tested by: sam (arm/ixp425) diff 181303 Mon Aug 04 19:02:46 MDT 2008 jhb Add locking to the various iicbus(4) bridge drivers: - Just grab Giant in the ixp425_iic(4) driver since this driver uses a shared address/data register window pair to access the actual I2C registers. None of the other ixp425 drivers lock access to these shared address/data registers yet and that would need to be done before this could use any meaningful locking. - Add locking to the interrupt handler and 'iicbus_reset' methods of the at91_twi(4) driver. - Add locking to the pcf(4) driver. Other pcf(4) fixes include: - Don't needlessly zero the softc. - Use bus_foo rather than bus_space_foo and remove bus space tag and handle from softc. - The lpbb(4) driver just grabs Giant for now. This will be refined later when ppbus(4) is locked. - As was done with smbus earlier, move the DRIVER_MODULE() lines to match the bus driver (either iicbus or iicbb) to the bridge driver into the bridge drivers. Tested by: sam (arm/ixp425) diff 165951 Thu Jan 11 17:56:24 MST 2007 jhb Various updates to most of the smbus(4) drivers: - Use printf() and device_printf() instead of log() in ichsmb(4). - Create the mutex sooner during ichsmb(4) attach. - Attach the interrupt handler later during ichsmb(4) attach to avoid races. - Don't try to set PCIM_CMD_PORTEN in ichsmb(4) attach as the PCI bus driver does this already. - Add locking to alpm(4), amdpm(4), amdsmb(4), intsmb(4), nfsmb(4), and viapm(4). - Axe ALPM_SMBIO_BASE_ADDR, it's not really safe to write arbitrary values into BARs, and the PCI bus layer will allocate resources now if needed. - Merge intpm(4) and intsmb(4) into just intsmb(4). Previously, intpm(4) attached to the PCI device and created an intsmb(4) child. Now, intsmb(4) just attaches to PCI directly. - Change several intsmb functions to take a softc instead of a device_t to make things simpler. diff 165951 Thu Jan 11 17:56:24 MST 2007 jhb Various updates to most of the smbus(4) drivers: - Use printf() and device_printf() instead of log() in ichsmb(4). - Create the mutex sooner during ichsmb(4) attach. - Attach the interrupt handler later during ichsmb(4) attach to avoid races. - Don't try to set PCIM_CMD_PORTEN in ichsmb(4) attach as the PCI bus driver does this already. - Add locking to alpm(4), amdpm(4), amdsmb(4), intsmb(4), nfsmb(4), and viapm(4). - Axe ALPM_SMBIO_BASE_ADDR, it's not really safe to write arbitrary values into BARs, and the PCI bus layer will allocate resources now if needed. - Merge intpm(4) and intsmb(4) into just intsmb(4). Previously, intpm(4) attached to the PCI device and created an intsmb(4) child. Now, intsmb(4) just attaches to PCI directly. - Change several intsmb functions to take a softc instead of a device_t to make things simpler. diff 165951 Thu Jan 11 17:56:24 MST 2007 jhb Various updates to most of the smbus(4) drivers: - Use printf() and device_printf() instead of log() in ichsmb(4). - Create the mutex sooner during ichsmb(4) attach. - Attach the interrupt handler later during ichsmb(4) attach to avoid races. - Don't try to set PCIM_CMD_PORTEN in ichsmb(4) attach as the PCI bus driver does this already. - Add locking to alpm(4), amdpm(4), amdsmb(4), intsmb(4), nfsmb(4), and viapm(4). - Axe ALPM_SMBIO_BASE_ADDR, it's not really safe to write arbitrary values into BARs, and the PCI bus layer will allocate resources now if needed. - Merge intpm(4) and intsmb(4) into just intsmb(4). Previously, intpm(4) attached to the PCI device and created an intsmb(4) child. Now, intsmb(4) just attaches to PCI directly. - Change several intsmb functions to take a softc instead of a device_t to make things simpler. diff 165951 Thu Jan 11 17:56:24 MST 2007 jhb Various updates to most of the smbus(4) drivers: - Use printf() and device_printf() instead of log() in ichsmb(4). - Create the mutex sooner during ichsmb(4) attach. - Attach the interrupt handler later during ichsmb(4) attach to avoid races. - Don't try to set PCIM_CMD_PORTEN in ichsmb(4) attach as the PCI bus driver does this already. - Add locking to alpm(4), amdpm(4), amdsmb(4), intsmb(4), nfsmb(4), and viapm(4). - Axe ALPM_SMBIO_BASE_ADDR, it's not really safe to write arbitrary values into BARs, and the PCI bus layer will allocate resources now if needed. - Merge intpm(4) and intsmb(4) into just intsmb(4). Previously, intpm(4) attached to the PCI device and created an intsmb(4) child. Now, intsmb(4) just attaches to PCI directly. - Change several intsmb functions to take a softc instead of a device_t to make things simpler. diff 165951 Thu Jan 11 17:56:24 MST 2007 jhb Various updates to most of the smbus(4) drivers: - Use printf() and device_printf() instead of log() in ichsmb(4). - Create the mutex sooner during ichsmb(4) attach. - Attach the interrupt handler later during ichsmb(4) attach to avoid races. - Don't try to set PCIM_CMD_PORTEN in ichsmb(4) attach as the PCI bus driver does this already. - Add locking to alpm(4), amdpm(4), amdsmb(4), intsmb(4), nfsmb(4), and viapm(4). - Axe ALPM_SMBIO_BASE_ADDR, it's not really safe to write arbitrary values into BARs, and the PCI bus layer will allocate resources now if needed. - Merge intpm(4) and intsmb(4) into just intsmb(4). Previously, intpm(4) attached to the PCI device and created an intsmb(4) child. Now, intsmb(4) just attaches to PCI directly. - Change several intsmb functions to take a softc instead of a device_t to make things simpler. diff 165951 Thu Jan 11 17:56:24 MST 2007 jhb Various updates to most of the smbus(4) drivers: - Use printf() and device_printf() instead of log() in ichsmb(4). - Create the mutex sooner during ichsmb(4) attach. - Attach the interrupt handler later during ichsmb(4) attach to avoid races. - Don't try to set PCIM_CMD_PORTEN in ichsmb(4) attach as the PCI bus driver does this already. - Add locking to alpm(4), amdpm(4), amdsmb(4), intsmb(4), nfsmb(4), and viapm(4). - Axe ALPM_SMBIO_BASE_ADDR, it's not really safe to write arbitrary values into BARs, and the PCI bus layer will allocate resources now if needed. - Merge intpm(4) and intsmb(4) into just intsmb(4). Previously, intpm(4) attached to the PCI device and created an intsmb(4) child. Now, intsmb(4) just attaches to PCI directly. - Change several intsmb functions to take a softc instead of a device_t to make things simpler. diff 165951 Thu Jan 11 17:56:24 MST 2007 jhb Various updates to most of the smbus(4) drivers: - Use printf() and device_printf() instead of log() in ichsmb(4). - Create the mutex sooner during ichsmb(4) attach. - Attach the interrupt handler later during ichsmb(4) attach to avoid races. - Don't try to set PCIM_CMD_PORTEN in ichsmb(4) attach as the PCI bus driver does this already. - Add locking to alpm(4), amdpm(4), amdsmb(4), intsmb(4), nfsmb(4), and viapm(4). - Axe ALPM_SMBIO_BASE_ADDR, it's not really safe to write arbitrary values into BARs, and the PCI bus layer will allocate resources now if needed. - Merge intpm(4) and intsmb(4) into just intsmb(4). Previously, intpm(4) attached to the PCI device and created an intsmb(4) child. Now, intsmb(4) just attaches to PCI directly. - Change several intsmb functions to take a softc instead of a device_t to make things simpler. diff 165951 Thu Jan 11 17:56:24 MST 2007 jhb Various updates to most of the smbus(4) drivers: - Use printf() and device_printf() instead of log() in ichsmb(4). - Create the mutex sooner during ichsmb(4) attach. - Attach the interrupt handler later during ichsmb(4) attach to avoid races. - Don't try to set PCIM_CMD_PORTEN in ichsmb(4) attach as the PCI bus driver does this already. - Add locking to alpm(4), amdpm(4), amdsmb(4), intsmb(4), nfsmb(4), and viapm(4). - Axe ALPM_SMBIO_BASE_ADDR, it's not really safe to write arbitrary values into BARs, and the PCI bus layer will allocate resources now if needed. - Merge intpm(4) and intsmb(4) into just intsmb(4). Previously, intpm(4) attached to the PCI device and created an intsmb(4) child. Now, intsmb(4) just attaches to PCI directly. - Change several intsmb functions to take a softc instead of a device_t to make things simpler. diff 165951 Thu Jan 11 17:56:24 MST 2007 jhb Various updates to most of the smbus(4) drivers: - Use printf() and device_printf() instead of log() in ichsmb(4). - Create the mutex sooner during ichsmb(4) attach. - Attach the interrupt handler later during ichsmb(4) attach to avoid races. - Don't try to set PCIM_CMD_PORTEN in ichsmb(4) attach as the PCI bus driver does this already. - Add locking to alpm(4), amdpm(4), amdsmb(4), intsmb(4), nfsmb(4), and viapm(4). - Axe ALPM_SMBIO_BASE_ADDR, it's not really safe to write arbitrary values into BARs, and the PCI bus layer will allocate resources now if needed. - Merge intpm(4) and intsmb(4) into just intsmb(4). Previously, intpm(4) attached to the PCI device and created an intsmb(4) child. Now, intsmb(4) just attaches to PCI directly. - Change several intsmb functions to take a softc instead of a device_t to make things simpler. diff 165951 Thu Jan 11 17:56:24 MST 2007 jhb Various updates to most of the smbus(4) drivers: - Use printf() and device_printf() instead of log() in ichsmb(4). - Create the mutex sooner during ichsmb(4) attach. - Attach the interrupt handler later during ichsmb(4) attach to avoid races. - Don't try to set PCIM_CMD_PORTEN in ichsmb(4) attach as the PCI bus driver does this already. - Add locking to alpm(4), amdpm(4), amdsmb(4), intsmb(4), nfsmb(4), and viapm(4). - Axe ALPM_SMBIO_BASE_ADDR, it's not really safe to write arbitrary values into BARs, and the PCI bus layer will allocate resources now if needed. - Merge intpm(4) and intsmb(4) into just intsmb(4). Previously, intpm(4) attached to the PCI device and created an intsmb(4) child. Now, intsmb(4) just attaches to PCI directly. - Change several intsmb functions to take a softc instead of a device_t to make things simpler. diff 165951 Thu Jan 11 17:56:24 MST 2007 jhb Various updates to most of the smbus(4) drivers: - Use printf() and device_printf() instead of log() in ichsmb(4). - Create the mutex sooner during ichsmb(4) attach. - Attach the interrupt handler later during ichsmb(4) attach to avoid races. - Don't try to set PCIM_CMD_PORTEN in ichsmb(4) attach as the PCI bus driver does this already. - Add locking to alpm(4), amdpm(4), amdsmb(4), intsmb(4), nfsmb(4), and viapm(4). - Axe ALPM_SMBIO_BASE_ADDR, it's not really safe to write arbitrary values into BARs, and the PCI bus layer will allocate resources now if needed. - Merge intpm(4) and intsmb(4) into just intsmb(4). Previously, intpm(4) attached to the PCI device and created an intsmb(4) child. Now, intsmb(4) just attaches to PCI directly. - Change several intsmb functions to take a softc instead of a device_t to make things simpler. diff 165951 Thu Jan 11 17:56:24 MST 2007 jhb Various updates to most of the smbus(4) drivers: - Use printf() and device_printf() instead of log() in ichsmb(4). - Create the mutex sooner during ichsmb(4) attach. - Attach the interrupt handler later during ichsmb(4) attach to avoid races. - Don't try to set PCIM_CMD_PORTEN in ichsmb(4) attach as the PCI bus driver does this already. - Add locking to alpm(4), amdpm(4), amdsmb(4), intsmb(4), nfsmb(4), and viapm(4). - Axe ALPM_SMBIO_BASE_ADDR, it's not really safe to write arbitrary values into BARs, and the PCI bus layer will allocate resources now if needed. - Merge intpm(4) and intsmb(4) into just intsmb(4). Previously, intpm(4) attached to the PCI device and created an intsmb(4) child. Now, intsmb(4) just attaches to PCI directly. - Change several intsmb functions to take a softc instead of a device_t to make things simpler. diff 165951 Thu Jan 11 17:56:24 MST 2007 jhb Various updates to most of the smbus(4) drivers: - Use printf() and device_printf() instead of log() in ichsmb(4). - Create the mutex sooner during ichsmb(4) attach. - Attach the interrupt handler later during ichsmb(4) attach to avoid races. - Don't try to set PCIM_CMD_PORTEN in ichsmb(4) attach as the PCI bus driver does this already. - Add locking to alpm(4), amdpm(4), amdsmb(4), intsmb(4), nfsmb(4), and viapm(4). - Axe ALPM_SMBIO_BASE_ADDR, it's not really safe to write arbitrary values into BARs, and the PCI bus layer will allocate resources now if needed. - Merge intpm(4) and intsmb(4) into just intsmb(4). Previously, intpm(4) attached to the PCI device and created an intsmb(4) child. Now, intsmb(4) just attaches to PCI directly. - Change several intsmb functions to take a softc instead of a device_t to make things simpler. diff 165951 Thu Jan 11 17:56:24 MST 2007 jhb Various updates to most of the smbus(4) drivers: - Use printf() and device_printf() instead of log() in ichsmb(4). - Create the mutex sooner during ichsmb(4) attach. - Attach the interrupt handler later during ichsmb(4) attach to avoid races. - Don't try to set PCIM_CMD_PORTEN in ichsmb(4) attach as the PCI bus driver does this already. - Add locking to alpm(4), amdpm(4), amdsmb(4), intsmb(4), nfsmb(4), and viapm(4). - Axe ALPM_SMBIO_BASE_ADDR, it's not really safe to write arbitrary values into BARs, and the PCI bus layer will allocate resources now if needed. - Merge intpm(4) and intsmb(4) into just intsmb(4). Previously, intpm(4) attached to the PCI device and created an intsmb(4) child. Now, intsmb(4) just attaches to PCI directly. - Change several intsmb functions to take a softc instead of a device_t to make things simpler. diff 165951 Thu Jan 11 17:56:24 MST 2007 jhb Various updates to most of the smbus(4) drivers: - Use printf() and device_printf() instead of log() in ichsmb(4). - Create the mutex sooner during ichsmb(4) attach. - Attach the interrupt handler later during ichsmb(4) attach to avoid races. - Don't try to set PCIM_CMD_PORTEN in ichsmb(4) attach as the PCI bus driver does this already. - Add locking to alpm(4), amdpm(4), amdsmb(4), intsmb(4), nfsmb(4), and viapm(4). - Axe ALPM_SMBIO_BASE_ADDR, it's not really safe to write arbitrary values into BARs, and the PCI bus layer will allocate resources now if needed. - Merge intpm(4) and intsmb(4) into just intsmb(4). Previously, intpm(4) attached to the PCI device and created an intsmb(4) child. Now, intsmb(4) just attaches to PCI directly. - Change several intsmb functions to take a softc instead of a device_t to make things simpler. diff 165951 Thu Jan 11 17:56:24 MST 2007 jhb Various updates to most of the smbus(4) drivers: - Use printf() and device_printf() instead of log() in ichsmb(4). - Create the mutex sooner during ichsmb(4) attach. - Attach the interrupt handler later during ichsmb(4) attach to avoid races. - Don't try to set PCIM_CMD_PORTEN in ichsmb(4) attach as the PCI bus driver does this already. - Add locking to alpm(4), amdpm(4), amdsmb(4), intsmb(4), nfsmb(4), and viapm(4). - Axe ALPM_SMBIO_BASE_ADDR, it's not really safe to write arbitrary values into BARs, and the PCI bus layer will allocate resources now if needed. - Merge intpm(4) and intsmb(4) into just intsmb(4). Previously, intpm(4) attached to the PCI device and created an intsmb(4) child. Now, intsmb(4) just attaches to PCI directly. - Change several intsmb functions to take a softc instead of a device_t to make things simpler. diff 165951 Thu Jan 11 17:56:24 MST 2007 jhb Various updates to most of the smbus(4) drivers: - Use printf() and device_printf() instead of log() in ichsmb(4). - Create the mutex sooner during ichsmb(4) attach. - Attach the interrupt handler later during ichsmb(4) attach to avoid races. - Don't try to set PCIM_CMD_PORTEN in ichsmb(4) attach as the PCI bus driver does this already. - Add locking to alpm(4), amdpm(4), amdsmb(4), intsmb(4), nfsmb(4), and viapm(4). - Axe ALPM_SMBIO_BASE_ADDR, it's not really safe to write arbitrary values into BARs, and the PCI bus layer will allocate resources now if needed. - Merge intpm(4) and intsmb(4) into just intsmb(4). Previously, intpm(4) attached to the PCI device and created an intsmb(4) child. Now, intsmb(4) just attaches to PCI directly. - Change several intsmb functions to take a softc instead of a device_t to make things simpler. |
/freebsd-9.3-release/sys/dev/ic/ | ||
H A D | sab82532.h | 119815 Sat Sep 06 21:13:47 MDT 2003 marcel The uart(4) driver is an universal driver for various UART hardware. It improves on sio(4) in the following areas: o Fully newbusified to allow for memory mapped I/O. This is a must for ia64 and sparc64, o Machine dependent code to take full advantage of machine and firm- ware specific ways to define serial consoles and/or debug ports. o Hardware abstraction layer to allow the driver to be used with various UARTs, such as the well-known ns8250 family of UARTs, the Siemens sab82532 or the Zilog Z8530. This is especially important for pc98 and sparc64 where it's common to have different UARTs, o The notion of system devices to unkludge low-level consoles and remote gdb ports and provides the mechanics necessary to support the keyboard on sparc64 (which is UART based). o The notion of a kernel interface so that a UART can be tied to something other than the well-known TTY interface. This is needed on sparc64 to present the user with a device and ioctl handling suitable for a keyboard, but also allows us to cleanly hide an UART when used as a debug port. Following is a list of features and bugs/flaws specific to the ns8250 family of UARTs as compared to their support in sio(4): o The uart(4) driver determines the FIFO size and automaticly takes advantages of larger FIFOs and/or additional features. Note that since I don't have sufficient access to 16[679]5x UARTs, hardware flow control has not been enabled. This is almost trivial to do, provided one can test. The downside of this is that broken UARTs are more likely to not work correctly with uart(4). The need for tunables or knobs may be large enough to warrant their creation. o The uart(4) driver does not share the same bumpy history as sio(4) and will therefore not provide the necessary hooks, tweaks, quirks or work-arounds to deal with once common hardware. To that extend, uart(4) supports a subset of the UARTs that sio(4) supports. The question before us is whether the subset is sufficient for current hardware. o There is no support for multiport UARTs in uart(4). The decision behind this is that uart(4) deals with one EIA RS232-C interface. Packaging of multiple interfaces in a single chip or on a single expansion board is beyond the scope of uart(4) and is now mostly left for puc(4) to deal with. Lack of hardware made it impossible to actually implement such a dependency other than is present for the dual channel SAB82532 and Z8350 SCCs. The current list of missing features is: o No configuration capabilities. A set of tunables and sysctls is being worked out. There are likely not going to be any or much compile-time knobs. Such configuration does not fit well with current hardware. o No support for the PPS API. This is partly dependent on the ability to configure uart(4) and partly dependent on having sufficient information to implement it properly. As usual, the manpage is present but lacks the attention the software has gotten. 119815 Sat Sep 06 21:13:47 MDT 2003 marcel The uart(4) driver is an universal driver for various UART hardware. It improves on sio(4) in the following areas: o Fully newbusified to allow for memory mapped I/O. This is a must for ia64 and sparc64, o Machine dependent code to take full advantage of machine and firm- ware specific ways to define serial consoles and/or debug ports. o Hardware abstraction layer to allow the driver to be used with various UARTs, such as the well-known ns8250 family of UARTs, the Siemens sab82532 or the Zilog Z8530. This is especially important for pc98 and sparc64 where it's common to have different UARTs, o The notion of system devices to unkludge low-level consoles and remote gdb ports and provides the mechanics necessary to support the keyboard on sparc64 (which is UART based). o The notion of a kernel interface so that a UART can be tied to something other than the well-known TTY interface. This is needed on sparc64 to present the user with a device and ioctl handling suitable for a keyboard, but also allows us to cleanly hide an UART when used as a debug port. Following is a list of features and bugs/flaws specific to the ns8250 family of UARTs as compared to their support in sio(4): o The uart(4) driver determines the FIFO size and automaticly takes advantages of larger FIFOs and/or additional features. Note that since I don't have sufficient access to 16[679]5x UARTs, hardware flow control has not been enabled. This is almost trivial to do, provided one can test. The downside of this is that broken UARTs are more likely to not work correctly with uart(4). The need for tunables or knobs may be large enough to warrant their creation. o The uart(4) driver does not share the same bumpy history as sio(4) and will therefore not provide the necessary hooks, tweaks, quirks or work-arounds to deal with once common hardware. To that extend, uart(4) supports a subset of the UARTs that sio(4) supports. The question before us is whether the subset is sufficient for current hardware. o There is no support for multiport UARTs in uart(4). The decision behind this is that uart(4) deals with one EIA RS232-C interface. Packaging of multiple interfaces in a single chip or on a single expansion board is beyond the scope of uart(4) and is now mostly left for puc(4) to deal with. Lack of hardware made it impossible to actually implement such a dependency other than is present for the dual channel SAB82532 and Z8350 SCCs. The current list of missing features is: o No configuration capabilities. A set of tunables and sysctls is being worked out. There are likely not going to be any or much compile-time knobs. Such configuration does not fit well with current hardware. o No support for the PPS API. This is partly dependent on the ability to configure uart(4) and partly dependent on having sufficient information to implement it properly. As usual, the manpage is present but lacks the attention the software has gotten. 119815 Sat Sep 06 21:13:47 MDT 2003 marcel The uart(4) driver is an universal driver for various UART hardware. It improves on sio(4) in the following areas: o Fully newbusified to allow for memory mapped I/O. This is a must for ia64 and sparc64, o Machine dependent code to take full advantage of machine and firm- ware specific ways to define serial consoles and/or debug ports. o Hardware abstraction layer to allow the driver to be used with various UARTs, such as the well-known ns8250 family of UARTs, the Siemens sab82532 or the Zilog Z8530. This is especially important for pc98 and sparc64 where it's common to have different UARTs, o The notion of system devices to unkludge low-level consoles and remote gdb ports and provides the mechanics necessary to support the keyboard on sparc64 (which is UART based). o The notion of a kernel interface so that a UART can be tied to something other than the well-known TTY interface. This is needed on sparc64 to present the user with a device and ioctl handling suitable for a keyboard, but also allows us to cleanly hide an UART when used as a debug port. Following is a list of features and bugs/flaws specific to the ns8250 family of UARTs as compared to their support in sio(4): o The uart(4) driver determines the FIFO size and automaticly takes advantages of larger FIFOs and/or additional features. Note that since I don't have sufficient access to 16[679]5x UARTs, hardware flow control has not been enabled. This is almost trivial to do, provided one can test. The downside of this is that broken UARTs are more likely to not work correctly with uart(4). The need for tunables or knobs may be large enough to warrant their creation. o The uart(4) driver does not share the same bumpy history as sio(4) and will therefore not provide the necessary hooks, tweaks, quirks or work-arounds to deal with once common hardware. To that extend, uart(4) supports a subset of the UARTs that sio(4) supports. The question before us is whether the subset is sufficient for current hardware. o There is no support for multiport UARTs in uart(4). The decision behind this is that uart(4) deals with one EIA RS232-C interface. Packaging of multiple interfaces in a single chip or on a single expansion board is beyond the scope of uart(4) and is now mostly left for puc(4) to deal with. Lack of hardware made it impossible to actually implement such a dependency other than is present for the dual channel SAB82532 and Z8350 SCCs. The current list of missing features is: o No configuration capabilities. A set of tunables and sysctls is being worked out. There are likely not going to be any or much compile-time knobs. Such configuration does not fit well with current hardware. o No support for the PPS API. This is partly dependent on the ability to configure uart(4) and partly dependent on having sufficient information to implement it properly. As usual, the manpage is present but lacks the attention the software has gotten. 119815 Sat Sep 06 21:13:47 MDT 2003 marcel The uart(4) driver is an universal driver for various UART hardware. It improves on sio(4) in the following areas: o Fully newbusified to allow for memory mapped I/O. This is a must for ia64 and sparc64, o Machine dependent code to take full advantage of machine and firm- ware specific ways to define serial consoles and/or debug ports. o Hardware abstraction layer to allow the driver to be used with various UARTs, such as the well-known ns8250 family of UARTs, the Siemens sab82532 or the Zilog Z8530. This is especially important for pc98 and sparc64 where it's common to have different UARTs, o The notion of system devices to unkludge low-level consoles and remote gdb ports and provides the mechanics necessary to support the keyboard on sparc64 (which is UART based). o The notion of a kernel interface so that a UART can be tied to something other than the well-known TTY interface. This is needed on sparc64 to present the user with a device and ioctl handling suitable for a keyboard, but also allows us to cleanly hide an UART when used as a debug port. Following is a list of features and bugs/flaws specific to the ns8250 family of UARTs as compared to their support in sio(4): o The uart(4) driver determines the FIFO size and automaticly takes advantages of larger FIFOs and/or additional features. Note that since I don't have sufficient access to 16[679]5x UARTs, hardware flow control has not been enabled. This is almost trivial to do, provided one can test. The downside of this is that broken UARTs are more likely to not work correctly with uart(4). The need for tunables or knobs may be large enough to warrant their creation. o The uart(4) driver does not share the same bumpy history as sio(4) and will therefore not provide the necessary hooks, tweaks, quirks or work-arounds to deal with once common hardware. To that extend, uart(4) supports a subset of the UARTs that sio(4) supports. The question before us is whether the subset is sufficient for current hardware. o There is no support for multiport UARTs in uart(4). The decision behind this is that uart(4) deals with one EIA RS232-C interface. Packaging of multiple interfaces in a single chip or on a single expansion board is beyond the scope of uart(4) and is now mostly left for puc(4) to deal with. Lack of hardware made it impossible to actually implement such a dependency other than is present for the dual channel SAB82532 and Z8350 SCCs. The current list of missing features is: o No configuration capabilities. A set of tunables and sysctls is being worked out. There are likely not going to be any or much compile-time knobs. Such configuration does not fit well with current hardware. o No support for the PPS API. This is partly dependent on the ability to configure uart(4) and partly dependent on having sufficient information to implement it properly. As usual, the manpage is present but lacks the attention the software has gotten. 119815 Sat Sep 06 21:13:47 MDT 2003 marcel The uart(4) driver is an universal driver for various UART hardware. It improves on sio(4) in the following areas: o Fully newbusified to allow for memory mapped I/O. This is a must for ia64 and sparc64, o Machine dependent code to take full advantage of machine and firm- ware specific ways to define serial consoles and/or debug ports. o Hardware abstraction layer to allow the driver to be used with various UARTs, such as the well-known ns8250 family of UARTs, the Siemens sab82532 or the Zilog Z8530. This is especially important for pc98 and sparc64 where it's common to have different UARTs, o The notion of system devices to unkludge low-level consoles and remote gdb ports and provides the mechanics necessary to support the keyboard on sparc64 (which is UART based). o The notion of a kernel interface so that a UART can be tied to something other than the well-known TTY interface. This is needed on sparc64 to present the user with a device and ioctl handling suitable for a keyboard, but also allows us to cleanly hide an UART when used as a debug port. Following is a list of features and bugs/flaws specific to the ns8250 family of UARTs as compared to their support in sio(4): o The uart(4) driver determines the FIFO size and automaticly takes advantages of larger FIFOs and/or additional features. Note that since I don't have sufficient access to 16[679]5x UARTs, hardware flow control has not been enabled. This is almost trivial to do, provided one can test. The downside of this is that broken UARTs are more likely to not work correctly with uart(4). The need for tunables or knobs may be large enough to warrant their creation. o The uart(4) driver does not share the same bumpy history as sio(4) and will therefore not provide the necessary hooks, tweaks, quirks or work-arounds to deal with once common hardware. To that extend, uart(4) supports a subset of the UARTs that sio(4) supports. The question before us is whether the subset is sufficient for current hardware. o There is no support for multiport UARTs in uart(4). The decision behind this is that uart(4) deals with one EIA RS232-C interface. Packaging of multiple interfaces in a single chip or on a single expansion board is beyond the scope of uart(4) and is now mostly left for puc(4) to deal with. Lack of hardware made it impossible to actually implement such a dependency other than is present for the dual channel SAB82532 and Z8350 SCCs. The current list of missing features is: o No configuration capabilities. A set of tunables and sysctls is being worked out. There are likely not going to be any or much compile-time knobs. Such configuration does not fit well with current hardware. o No support for the PPS API. This is partly dependent on the ability to configure uart(4) and partly dependent on having sufficient information to implement it properly. As usual, the manpage is present but lacks the attention the software has gotten. 119815 Sat Sep 06 21:13:47 MDT 2003 marcel The uart(4) driver is an universal driver for various UART hardware. It improves on sio(4) in the following areas: o Fully newbusified to allow for memory mapped I/O. This is a must for ia64 and sparc64, o Machine dependent code to take full advantage of machine and firm- ware specific ways to define serial consoles and/or debug ports. o Hardware abstraction layer to allow the driver to be used with various UARTs, such as the well-known ns8250 family of UARTs, the Siemens sab82532 or the Zilog Z8530. This is especially important for pc98 and sparc64 where it's common to have different UARTs, o The notion of system devices to unkludge low-level consoles and remote gdb ports and provides the mechanics necessary to support the keyboard on sparc64 (which is UART based). o The notion of a kernel interface so that a UART can be tied to something other than the well-known TTY interface. This is needed on sparc64 to present the user with a device and ioctl handling suitable for a keyboard, but also allows us to cleanly hide an UART when used as a debug port. Following is a list of features and bugs/flaws specific to the ns8250 family of UARTs as compared to their support in sio(4): o The uart(4) driver determines the FIFO size and automaticly takes advantages of larger FIFOs and/or additional features. Note that since I don't have sufficient access to 16[679]5x UARTs, hardware flow control has not been enabled. This is almost trivial to do, provided one can test. The downside of this is that broken UARTs are more likely to not work correctly with uart(4). The need for tunables or knobs may be large enough to warrant their creation. o The uart(4) driver does not share the same bumpy history as sio(4) and will therefore not provide the necessary hooks, tweaks, quirks or work-arounds to deal with once common hardware. To that extend, uart(4) supports a subset of the UARTs that sio(4) supports. The question before us is whether the subset is sufficient for current hardware. o There is no support for multiport UARTs in uart(4). The decision behind this is that uart(4) deals with one EIA RS232-C interface. Packaging of multiple interfaces in a single chip or on a single expansion board is beyond the scope of uart(4) and is now mostly left for puc(4) to deal with. Lack of hardware made it impossible to actually implement such a dependency other than is present for the dual channel SAB82532 and Z8350 SCCs. The current list of missing features is: o No configuration capabilities. A set of tunables and sysctls is being worked out. There are likely not going to be any or much compile-time knobs. Such configuration does not fit well with current hardware. o No support for the PPS API. This is partly dependent on the ability to configure uart(4) and partly dependent on having sufficient information to implement it properly. As usual, the manpage is present but lacks the attention the software has gotten. 119815 Sat Sep 06 21:13:47 MDT 2003 marcel The uart(4) driver is an universal driver for various UART hardware. It improves on sio(4) in the following areas: o Fully newbusified to allow for memory mapped I/O. This is a must for ia64 and sparc64, o Machine dependent code to take full advantage of machine and firm- ware specific ways to define serial consoles and/or debug ports. o Hardware abstraction layer to allow the driver to be used with various UARTs, such as the well-known ns8250 family of UARTs, the Siemens sab82532 or the Zilog Z8530. This is especially important for pc98 and sparc64 where it's common to have different UARTs, o The notion of system devices to unkludge low-level consoles and remote gdb ports and provides the mechanics necessary to support the keyboard on sparc64 (which is UART based). o The notion of a kernel interface so that a UART can be tied to something other than the well-known TTY interface. This is needed on sparc64 to present the user with a device and ioctl handling suitable for a keyboard, but also allows us to cleanly hide an UART when used as a debug port. Following is a list of features and bugs/flaws specific to the ns8250 family of UARTs as compared to their support in sio(4): o The uart(4) driver determines the FIFO size and automaticly takes advantages of larger FIFOs and/or additional features. Note that since I don't have sufficient access to 16[679]5x UARTs, hardware flow control has not been enabled. This is almost trivial to do, provided one can test. The downside of this is that broken UARTs are more likely to not work correctly with uart(4). The need for tunables or knobs may be large enough to warrant their creation. o The uart(4) driver does not share the same bumpy history as sio(4) and will therefore not provide the necessary hooks, tweaks, quirks or work-arounds to deal with once common hardware. To that extend, uart(4) supports a subset of the UARTs that sio(4) supports. The question before us is whether the subset is sufficient for current hardware. o There is no support for multiport UARTs in uart(4). The decision behind this is that uart(4) deals with one EIA RS232-C interface. Packaging of multiple interfaces in a single chip or on a single expansion board is beyond the scope of uart(4) and is now mostly left for puc(4) to deal with. Lack of hardware made it impossible to actually implement such a dependency other than is present for the dual channel SAB82532 and Z8350 SCCs. The current list of missing features is: o No configuration capabilities. A set of tunables and sysctls is being worked out. There are likely not going to be any or much compile-time knobs. Such configuration does not fit well with current hardware. o No support for the PPS API. This is partly dependent on the ability to configure uart(4) and partly dependent on having sufficient information to implement it properly. As usual, the manpage is present but lacks the attention the software has gotten. 119815 Sat Sep 06 21:13:47 MDT 2003 marcel The uart(4) driver is an universal driver for various UART hardware. It improves on sio(4) in the following areas: o Fully newbusified to allow for memory mapped I/O. This is a must for ia64 and sparc64, o Machine dependent code to take full advantage of machine and firm- ware specific ways to define serial consoles and/or debug ports. o Hardware abstraction layer to allow the driver to be used with various UARTs, such as the well-known ns8250 family of UARTs, the Siemens sab82532 or the Zilog Z8530. This is especially important for pc98 and sparc64 where it's common to have different UARTs, o The notion of system devices to unkludge low-level consoles and remote gdb ports and provides the mechanics necessary to support the keyboard on sparc64 (which is UART based). o The notion of a kernel interface so that a UART can be tied to something other than the well-known TTY interface. This is needed on sparc64 to present the user with a device and ioctl handling suitable for a keyboard, but also allows us to cleanly hide an UART when used as a debug port. Following is a list of features and bugs/flaws specific to the ns8250 family of UARTs as compared to their support in sio(4): o The uart(4) driver determines the FIFO size and automaticly takes advantages of larger FIFOs and/or additional features. Note that since I don't have sufficient access to 16[679]5x UARTs, hardware flow control has not been enabled. This is almost trivial to do, provided one can test. The downside of this is that broken UARTs are more likely to not work correctly with uart(4). The need for tunables or knobs may be large enough to warrant their creation. o The uart(4) driver does not share the same bumpy history as sio(4) and will therefore not provide the necessary hooks, tweaks, quirks or work-arounds to deal with once common hardware. To that extend, uart(4) supports a subset of the UARTs that sio(4) supports. The question before us is whether the subset is sufficient for current hardware. o There is no support for multiport UARTs in uart(4). The decision behind this is that uart(4) deals with one EIA RS232-C interface. Packaging of multiple interfaces in a single chip or on a single expansion board is beyond the scope of uart(4) and is now mostly left for puc(4) to deal with. Lack of hardware made it impossible to actually implement such a dependency other than is present for the dual channel SAB82532 and Z8350 SCCs. The current list of missing features is: o No configuration capabilities. A set of tunables and sysctls is being worked out. There are likely not going to be any or much compile-time knobs. Such configuration does not fit well with current hardware. o No support for the PPS API. This is partly dependent on the ability to configure uart(4) and partly dependent on having sufficient information to implement it properly. As usual, the manpage is present but lacks the attention the software has gotten. 119815 Sat Sep 06 21:13:47 MDT 2003 marcel The uart(4) driver is an universal driver for various UART hardware. It improves on sio(4) in the following areas: o Fully newbusified to allow for memory mapped I/O. This is a must for ia64 and sparc64, o Machine dependent code to take full advantage of machine and firm- ware specific ways to define serial consoles and/or debug ports. o Hardware abstraction layer to allow the driver to be used with various UARTs, such as the well-known ns8250 family of UARTs, the Siemens sab82532 or the Zilog Z8530. This is especially important for pc98 and sparc64 where it's common to have different UARTs, o The notion of system devices to unkludge low-level consoles and remote gdb ports and provides the mechanics necessary to support the keyboard on sparc64 (which is UART based). o The notion of a kernel interface so that a UART can be tied to something other than the well-known TTY interface. This is needed on sparc64 to present the user with a device and ioctl handling suitable for a keyboard, but also allows us to cleanly hide an UART when used as a debug port. Following is a list of features and bugs/flaws specific to the ns8250 family of UARTs as compared to their support in sio(4): o The uart(4) driver determines the FIFO size and automaticly takes advantages of larger FIFOs and/or additional features. Note that since I don't have sufficient access to 16[679]5x UARTs, hardware flow control has not been enabled. This is almost trivial to do, provided one can test. The downside of this is that broken UARTs are more likely to not work correctly with uart(4). The need for tunables or knobs may be large enough to warrant their creation. o The uart(4) driver does not share the same bumpy history as sio(4) and will therefore not provide the necessary hooks, tweaks, quirks or work-arounds to deal with once common hardware. To that extend, uart(4) supports a subset of the UARTs that sio(4) supports. The question before us is whether the subset is sufficient for current hardware. o There is no support for multiport UARTs in uart(4). The decision behind this is that uart(4) deals with one EIA RS232-C interface. Packaging of multiple interfaces in a single chip or on a single expansion board is beyond the scope of uart(4) and is now mostly left for puc(4) to deal with. Lack of hardware made it impossible to actually implement such a dependency other than is present for the dual channel SAB82532 and Z8350 SCCs. The current list of missing features is: o No configuration capabilities. A set of tunables and sysctls is being worked out. There are likely not going to be any or much compile-time knobs. Such configuration does not fit well with current hardware. o No support for the PPS API. This is partly dependent on the ability to configure uart(4) and partly dependent on having sufficient information to implement it properly. As usual, the manpage is present but lacks the attention the software has gotten. 119815 Sat Sep 06 21:13:47 MDT 2003 marcel The uart(4) driver is an universal driver for various UART hardware. It improves on sio(4) in the following areas: o Fully newbusified to allow for memory mapped I/O. This is a must for ia64 and sparc64, o Machine dependent code to take full advantage of machine and firm- ware specific ways to define serial consoles and/or debug ports. o Hardware abstraction layer to allow the driver to be used with various UARTs, such as the well-known ns8250 family of UARTs, the Siemens sab82532 or the Zilog Z8530. This is especially important for pc98 and sparc64 where it's common to have different UARTs, o The notion of system devices to unkludge low-level consoles and remote gdb ports and provides the mechanics necessary to support the keyboard on sparc64 (which is UART based). o The notion of a kernel interface so that a UART can be tied to something other than the well-known TTY interface. This is needed on sparc64 to present the user with a device and ioctl handling suitable for a keyboard, but also allows us to cleanly hide an UART when used as a debug port. Following is a list of features and bugs/flaws specific to the ns8250 family of UARTs as compared to their support in sio(4): o The uart(4) driver determines the FIFO size and automaticly takes advantages of larger FIFOs and/or additional features. Note that since I don't have sufficient access to 16[679]5x UARTs, hardware flow control has not been enabled. This is almost trivial to do, provided one can test. The downside of this is that broken UARTs are more likely to not work correctly with uart(4). The need for tunables or knobs may be large enough to warrant their creation. o The uart(4) driver does not share the same bumpy history as sio(4) and will therefore not provide the necessary hooks, tweaks, quirks or work-arounds to deal with once common hardware. To that extend, uart(4) supports a subset of the UARTs that sio(4) supports. The question before us is whether the subset is sufficient for current hardware. o There is no support for multiport UARTs in uart(4). The decision behind this is that uart(4) deals with one EIA RS232-C interface. Packaging of multiple interfaces in a single chip or on a single expansion board is beyond the scope of uart(4) and is now mostly left for puc(4) to deal with. Lack of hardware made it impossible to actually implement such a dependency other than is present for the dual channel SAB82532 and Z8350 SCCs. The current list of missing features is: o No configuration capabilities. A set of tunables and sysctls is being worked out. There are likely not going to be any or much compile-time knobs. Such configuration does not fit well with current hardware. o No support for the PPS API. This is partly dependent on the ability to configure uart(4) and partly dependent on having sufficient information to implement it properly. As usual, the manpage is present but lacks the attention the software has gotten. 119815 Sat Sep 06 21:13:47 MDT 2003 marcel The uart(4) driver is an universal driver for various UART hardware. It improves on sio(4) in the following areas: o Fully newbusified to allow for memory mapped I/O. This is a must for ia64 and sparc64, o Machine dependent code to take full advantage of machine and firm- ware specific ways to define serial consoles and/or debug ports. o Hardware abstraction layer to allow the driver to be used with various UARTs, such as the well-known ns8250 family of UARTs, the Siemens sab82532 or the Zilog Z8530. This is especially important for pc98 and sparc64 where it's common to have different UARTs, o The notion of system devices to unkludge low-level consoles and remote gdb ports and provides the mechanics necessary to support the keyboard on sparc64 (which is UART based). o The notion of a kernel interface so that a UART can be tied to something other than the well-known TTY interface. This is needed on sparc64 to present the user with a device and ioctl handling suitable for a keyboard, but also allows us to cleanly hide an UART when used as a debug port. Following is a list of features and bugs/flaws specific to the ns8250 family of UARTs as compared to their support in sio(4): o The uart(4) driver determines the FIFO size and automaticly takes advantages of larger FIFOs and/or additional features. Note that since I don't have sufficient access to 16[679]5x UARTs, hardware flow control has not been enabled. This is almost trivial to do, provided one can test. The downside of this is that broken UARTs are more likely to not work correctly with uart(4). The need for tunables or knobs may be large enough to warrant their creation. o The uart(4) driver does not share the same bumpy history as sio(4) and will therefore not provide the necessary hooks, tweaks, quirks or work-arounds to deal with once common hardware. To that extend, uart(4) supports a subset of the UARTs that sio(4) supports. The question before us is whether the subset is sufficient for current hardware. o There is no support for multiport UARTs in uart(4). The decision behind this is that uart(4) deals with one EIA RS232-C interface. Packaging of multiple interfaces in a single chip or on a single expansion board is beyond the scope of uart(4) and is now mostly left for puc(4) to deal with. Lack of hardware made it impossible to actually implement such a dependency other than is present for the dual channel SAB82532 and Z8350 SCCs. The current list of missing features is: o No configuration capabilities. A set of tunables and sysctls is being worked out. There are likely not going to be any or much compile-time knobs. Such configuration does not fit well with current hardware. o No support for the PPS API. This is partly dependent on the ability to configure uart(4) and partly dependent on having sufficient information to implement it properly. As usual, the manpage is present but lacks the attention the software has gotten. 119815 Sat Sep 06 21:13:47 MDT 2003 marcel The uart(4) driver is an universal driver for various UART hardware. It improves on sio(4) in the following areas: o Fully newbusified to allow for memory mapped I/O. This is a must for ia64 and sparc64, o Machine dependent code to take full advantage of machine and firm- ware specific ways to define serial consoles and/or debug ports. o Hardware abstraction layer to allow the driver to be used with various UARTs, such as the well-known ns8250 family of UARTs, the Siemens sab82532 or the Zilog Z8530. This is especially important for pc98 and sparc64 where it's common to have different UARTs, o The notion of system devices to unkludge low-level consoles and remote gdb ports and provides the mechanics necessary to support the keyboard on sparc64 (which is UART based). o The notion of a kernel interface so that a UART can be tied to something other than the well-known TTY interface. This is needed on sparc64 to present the user with a device and ioctl handling suitable for a keyboard, but also allows us to cleanly hide an UART when used as a debug port. Following is a list of features and bugs/flaws specific to the ns8250 family of UARTs as compared to their support in sio(4): o The uart(4) driver determines the FIFO size and automaticly takes advantages of larger FIFOs and/or additional features. Note that since I don't have sufficient access to 16[679]5x UARTs, hardware flow control has not been enabled. This is almost trivial to do, provided one can test. The downside of this is that broken UARTs are more likely to not work correctly with uart(4). The need for tunables or knobs may be large enough to warrant their creation. o The uart(4) driver does not share the same bumpy history as sio(4) and will therefore not provide the necessary hooks, tweaks, quirks or work-arounds to deal with once common hardware. To that extend, uart(4) supports a subset of the UARTs that sio(4) supports. The question before us is whether the subset is sufficient for current hardware. o There is no support for multiport UARTs in uart(4). The decision behind this is that uart(4) deals with one EIA RS232-C interface. Packaging of multiple interfaces in a single chip or on a single expansion board is beyond the scope of uart(4) and is now mostly left for puc(4) to deal with. Lack of hardware made it impossible to actually implement such a dependency other than is present for the dual channel SAB82532 and Z8350 SCCs. The current list of missing features is: o No configuration capabilities. A set of tunables and sysctls is being worked out. There are likely not going to be any or much compile-time knobs. Such configuration does not fit well with current hardware. o No support for the PPS API. This is partly dependent on the ability to configure uart(4) and partly dependent on having sufficient information to implement it properly. As usual, the manpage is present but lacks the attention the software has gotten. 119815 Sat Sep 06 21:13:47 MDT 2003 marcel The uart(4) driver is an universal driver for various UART hardware. It improves on sio(4) in the following areas: o Fully newbusified to allow for memory mapped I/O. This is a must for ia64 and sparc64, o Machine dependent code to take full advantage of machine and firm- ware specific ways to define serial consoles and/or debug ports. o Hardware abstraction layer to allow the driver to be used with various UARTs, such as the well-known ns8250 family of UARTs, the Siemens sab82532 or the Zilog Z8530. This is especially important for pc98 and sparc64 where it's common to have different UARTs, o The notion of system devices to unkludge low-level consoles and remote gdb ports and provides the mechanics necessary to support the keyboard on sparc64 (which is UART based). o The notion of a kernel interface so that a UART can be tied to something other than the well-known TTY interface. This is needed on sparc64 to present the user with a device and ioctl handling suitable for a keyboard, but also allows us to cleanly hide an UART when used as a debug port. Following is a list of features and bugs/flaws specific to the ns8250 family of UARTs as compared to their support in sio(4): o The uart(4) driver determines the FIFO size and automaticly takes advantages of larger FIFOs and/or additional features. Note that since I don't have sufficient access to 16[679]5x UARTs, hardware flow control has not been enabled. This is almost trivial to do, provided one can test. The downside of this is that broken UARTs are more likely to not work correctly with uart(4). The need for tunables or knobs may be large enough to warrant their creation. o The uart(4) driver does not share the same bumpy history as sio(4) and will therefore not provide the necessary hooks, tweaks, quirks or work-arounds to deal with once common hardware. To that extend, uart(4) supports a subset of the UARTs that sio(4) supports. The question before us is whether the subset is sufficient for current hardware. o There is no support for multiport UARTs in uart(4). The decision behind this is that uart(4) deals with one EIA RS232-C interface. Packaging of multiple interfaces in a single chip or on a single expansion board is beyond the scope of uart(4) and is now mostly left for puc(4) to deal with. Lack of hardware made it impossible to actually implement such a dependency other than is present for the dual channel SAB82532 and Z8350 SCCs. The current list of missing features is: o No configuration capabilities. A set of tunables and sysctls is being worked out. There are likely not going to be any or much compile-time knobs. Such configuration does not fit well with current hardware. o No support for the PPS API. This is partly dependent on the ability to configure uart(4) and partly dependent on having sufficient information to implement it properly. As usual, the manpage is present but lacks the attention the software has gotten. 119815 Sat Sep 06 21:13:47 MDT 2003 marcel The uart(4) driver is an universal driver for various UART hardware. It improves on sio(4) in the following areas: o Fully newbusified to allow for memory mapped I/O. This is a must for ia64 and sparc64, o Machine dependent code to take full advantage of machine and firm- ware specific ways to define serial consoles and/or debug ports. o Hardware abstraction layer to allow the driver to be used with various UARTs, such as the well-known ns8250 family of UARTs, the Siemens sab82532 or the Zilog Z8530. This is especially important for pc98 and sparc64 where it's common to have different UARTs, o The notion of system devices to unkludge low-level consoles and remote gdb ports and provides the mechanics necessary to support the keyboard on sparc64 (which is UART based). o The notion of a kernel interface so that a UART can be tied to something other than the well-known TTY interface. This is needed on sparc64 to present the user with a device and ioctl handling suitable for a keyboard, but also allows us to cleanly hide an UART when used as a debug port. Following is a list of features and bugs/flaws specific to the ns8250 family of UARTs as compared to their support in sio(4): o The uart(4) driver determines the FIFO size and automaticly takes advantages of larger FIFOs and/or additional features. Note that since I don't have sufficient access to 16[679]5x UARTs, hardware flow control has not been enabled. This is almost trivial to do, provided one can test. The downside of this is that broken UARTs are more likely to not work correctly with uart(4). The need for tunables or knobs may be large enough to warrant their creation. o The uart(4) driver does not share the same bumpy history as sio(4) and will therefore not provide the necessary hooks, tweaks, quirks or work-arounds to deal with once common hardware. To that extend, uart(4) supports a subset of the UARTs that sio(4) supports. The question before us is whether the subset is sufficient for current hardware. o There is no support for multiport UARTs in uart(4). The decision behind this is that uart(4) deals with one EIA RS232-C interface. Packaging of multiple interfaces in a single chip or on a single expansion board is beyond the scope of uart(4) and is now mostly left for puc(4) to deal with. Lack of hardware made it impossible to actually implement such a dependency other than is present for the dual channel SAB82532 and Z8350 SCCs. The current list of missing features is: o No configuration capabilities. A set of tunables and sysctls is being worked out. There are likely not going to be any or much compile-time knobs. Such configuration does not fit well with current hardware. o No support for the PPS API. This is partly dependent on the ability to configure uart(4) and partly dependent on having sufficient information to implement it properly. As usual, the manpage is present but lacks the attention the software has gotten. |
/freebsd-9.3-release/share/man/man4/man4.sparc64/ | ||
H A D | sbus.4 | diff 204605 Tue Mar 02 20:14:14 MST 2010 joel The NetBSD Foundation has granted permission to remove clause 3 and 4 from their software. Obtained from: NetBSD diff 161832 Fri Sep 01 17:51:26 MDT 2006 marius Add references to scc(4) as it hangs off of ebus(4) and sbus(4) respectively. diff 161832 Fri Sep 01 17:51:26 MDT 2006 marius Add references to scc(4) as it hangs off of ebus(4) and sbus(4) respectively. diff 161832 Fri Sep 01 17:51:26 MDT 2006 marius Add references to scc(4) as it hangs off of ebus(4) and sbus(4) respectively. diff 155155 Tue Jan 31 20:45:51 MST 2006 marius Add a reference to le(4) as the SBus-based Ultra 1 have on-board LANCE. |
/freebsd-9.3-release/sys/dev/fdt/ | ||
H A D | simplebus.c | diff 209904 Sun Jul 11 18:43:37 MDT 2010 raj Let simplebus(4) diagnostics be a bit more descriptive. 208747 Wed Jun 02 15:21:59 MDT 2010 raj Import the common Flattened Device Tree infrastructure. o fdtbus(4) - the main abstract bus driver for all FDT-compliant systems. This is a direct replacement for the many incompatible bus drivers grouping integrated peripherals on embedded platforms (like obio(4), ocpbus(4) etc.) o simplebus(4) - bus driver representing ePAPR style 'simple-bus' node, which is an umbrella device for most of the integrated peripherals on a typical system-on-chip device. o Other components (common routines library, PCI node processing helper functions) Reviewed by: imp Sponsored by: The FreeBSD Foundation 208747 Wed Jun 02 15:21:59 MDT 2010 raj Import the common Flattened Device Tree infrastructure. o fdtbus(4) - the main abstract bus driver for all FDT-compliant systems. This is a direct replacement for the many incompatible bus drivers grouping integrated peripherals on embedded platforms (like obio(4), ocpbus(4) etc.) o simplebus(4) - bus driver representing ePAPR style 'simple-bus' node, which is an umbrella device for most of the integrated peripherals on a typical system-on-chip device. o Other components (common routines library, PCI node processing helper functions) Reviewed by: imp Sponsored by: The FreeBSD Foundation 208747 Wed Jun 02 15:21:59 MDT 2010 raj Import the common Flattened Device Tree infrastructure. o fdtbus(4) - the main abstract bus driver for all FDT-compliant systems. This is a direct replacement for the many incompatible bus drivers grouping integrated peripherals on embedded platforms (like obio(4), ocpbus(4) etc.) o simplebus(4) - bus driver representing ePAPR style 'simple-bus' node, which is an umbrella device for most of the integrated peripherals on a typical system-on-chip device. o Other components (common routines library, PCI node processing helper functions) Reviewed by: imp Sponsored by: The FreeBSD Foundation 208747 Wed Jun 02 15:21:59 MDT 2010 raj Import the common Flattened Device Tree infrastructure. o fdtbus(4) - the main abstract bus driver for all FDT-compliant systems. This is a direct replacement for the many incompatible bus drivers grouping integrated peripherals on embedded platforms (like obio(4), ocpbus(4) etc.) o simplebus(4) - bus driver representing ePAPR style 'simple-bus' node, which is an umbrella device for most of the integrated peripherals on a typical system-on-chip device. o Other components (common routines library, PCI node processing helper functions) Reviewed by: imp Sponsored by: The FreeBSD Foundation |
/freebsd-9.3-release/sys/kern/ | ||
H A D | serdev_if.m | 157299 Thu Mar 30 16:33:22 MST 2006 marcel Add scc(4), a driver for serial communications controllers. These controllers typically have multiple channels and support a number of serial communications protocols. The scc(4) driver is itself an umbrella driver that delegates the control over each channel and mode to a subordinate driver (like uart(4)). The scc(4) driver supports the Siemens SAB 82532 and the Zilog Z8530 and replaces puc(4) for these devices. 157299 Thu Mar 30 16:33:22 MST 2006 marcel Add scc(4), a driver for serial communications controllers. These controllers typically have multiple channels and support a number of serial communications protocols. The scc(4) driver is itself an umbrella driver that delegates the control over each channel and mode to a subordinate driver (like uart(4)). The scc(4) driver supports the Siemens SAB 82532 and the Zilog Z8530 and replaces puc(4) for these devices. 157299 Thu Mar 30 16:33:22 MST 2006 marcel Add scc(4), a driver for serial communications controllers. These controllers typically have multiple channels and support a number of serial communications protocols. The scc(4) driver is itself an umbrella driver that delegates the control over each channel and mode to a subordinate driver (like uart(4)). The scc(4) driver supports the Siemens SAB 82532 and the Zilog Z8530 and replaces puc(4) for these devices. 157299 Thu Mar 30 16:33:22 MST 2006 marcel Add scc(4), a driver for serial communications controllers. These controllers typically have multiple channels and support a number of serial communications protocols. The scc(4) driver is itself an umbrella driver that delegates the control over each channel and mode to a subordinate driver (like uart(4)). The scc(4) driver supports the Siemens SAB 82532 and the Zilog Z8530 and replaces puc(4) for these devices. 157299 Thu Mar 30 16:33:22 MST 2006 marcel Add scc(4), a driver for serial communications controllers. These controllers typically have multiple channels and support a number of serial communications protocols. The scc(4) driver is itself an umbrella driver that delegates the control over each channel and mode to a subordinate driver (like uart(4)). The scc(4) driver supports the Siemens SAB 82532 and the Zilog Z8530 and replaces puc(4) for these devices. |
/freebsd-9.3-release/sys/modules/vge/ | ||
H A D | Makefile | diff 150636 Tue Sep 27 16:10:43 MDT 2005 mlaier Remove bridge(4) from the tree. if_bridge(4) is a full functional replacement and has additional features which make it superior. Discussed on: -arch Reviewed by: thompsa X-MFC-after: never (RELENG_6 as transition period) diff 150636 Tue Sep 27 16:10:43 MDT 2005 mlaier Remove bridge(4) from the tree. if_bridge(4) is a full functional replacement and has additional features which make it superior. Discussed on: -arch Reviewed by: thompsa X-MFC-after: never (RELENG_6 as transition period) 135048 Fri Sep 10 18:57:46 MDT 2004 wpaul Add device driver support for the VIA Networking Technologies VT6122 gigabit ethernet chip and integrated 10/100/1000 copper PHY. The vge driver has been added to GENERIC for i386, pc98 and amd64, but not to sparc or ia64 since I don't have the ability to test it there. The vge(4) driver supports VLANs, checksum offload and jumbo frames. Also added the lge(4) and nge(4) drivers to GENERIC for i386 and pc98 since I was in the neighborhood. There's no reason to leave them out anymore. 135048 Fri Sep 10 18:57:46 MDT 2004 wpaul Add device driver support for the VIA Networking Technologies VT6122 gigabit ethernet chip and integrated 10/100/1000 copper PHY. The vge driver has been added to GENERIC for i386, pc98 and amd64, but not to sparc or ia64 since I don't have the ability to test it there. The vge(4) driver supports VLANs, checksum offload and jumbo frames. Also added the lge(4) and nge(4) drivers to GENERIC for i386 and pc98 since I was in the neighborhood. There's no reason to leave them out anymore. 135048 Fri Sep 10 18:57:46 MDT 2004 wpaul Add device driver support for the VIA Networking Technologies VT6122 gigabit ethernet chip and integrated 10/100/1000 copper PHY. The vge driver has been added to GENERIC for i386, pc98 and amd64, but not to sparc or ia64 since I don't have the ability to test it there. The vge(4) driver supports VLANs, checksum offload and jumbo frames. Also added the lge(4) and nge(4) drivers to GENERIC for i386 and pc98 since I was in the neighborhood. There's no reason to leave them out anymore. |
/freebsd-9.3-release/sys/amd64/include/ | ||
H A D | nexusvar.h | 177157 Thu Mar 13 18:39:04 MDT 2008 jhb Rework how the nexus(4) device works on x86 to better handle the idea of different "platforms" on x86 machines. The existing code already handles having two platforms: ACPI and legacy. However, the existing approach was rather hardcoded and difficult to extend. These changes take the approach that each x86 hardware platform should provide its own nexus(4) driver (it can inherit most of its behavior from the default legacy nexus(4) driver) which is responsible for probing for the platform and performing appropriate platform-specific setup during attach (such as adding a platform-specific bus device). This does mean changing the x86 platform busses to no longer use an identify routine for probing, but to move that logic into their matching nexus(4) driver instead. - Make the default nexus(4) driver in nexus.c on i386 and amd64 handle the legacy platform. It's probe routine now returns BUS_PROBE_GENERIC so it can be overriden. - Expose a nexus_init_resources() routine which initializes the various resource managers so that subclassed nexus(4) drivers can invoke it from their attach routine. - The legacy nexus(4) driver explicitly adds a legacy0 device in its attach routine. - The ACPI driver no longer contains an new-bus identify method. Instead it exposes a public function (acpi_identify()) which is a probe routine that the MD nexus(4) drivers can use to probe for ACPI. All of the probe logic in acpi_probe() is now moved into acpi_identify() and acpi_probe() is just a stub. - On i386 and amd64, an ACPI-specific nexus(4) driver checks for ACPI via acpi_identify() and claims the nexus0 device if the probe succeeds. It then explicitly adds an acpi0 device in its attach routine. - The legacy(4) driver no longer knows anything about the acpi0 device. - On ia64 if acpi_identify() fails you basically end up with no devices. This matches the previous behavior where the old acpi_identify() would fail to add an acpi0 device again leaving you with no devices. Discussed with: imp Silence on: arch@ 177157 Thu Mar 13 18:39:04 MDT 2008 jhb Rework how the nexus(4) device works on x86 to better handle the idea of different "platforms" on x86 machines. The existing code already handles having two platforms: ACPI and legacy. However, the existing approach was rather hardcoded and difficult to extend. These changes take the approach that each x86 hardware platform should provide its own nexus(4) driver (it can inherit most of its behavior from the default legacy nexus(4) driver) which is responsible for probing for the platform and performing appropriate platform-specific setup during attach (such as adding a platform-specific bus device). This does mean changing the x86 platform busses to no longer use an identify routine for probing, but to move that logic into their matching nexus(4) driver instead. - Make the default nexus(4) driver in nexus.c on i386 and amd64 handle the legacy platform. It's probe routine now returns BUS_PROBE_GENERIC so it can be overriden. - Expose a nexus_init_resources() routine which initializes the various resource managers so that subclassed nexus(4) drivers can invoke it from their attach routine. - The legacy nexus(4) driver explicitly adds a legacy0 device in its attach routine. - The ACPI driver no longer contains an new-bus identify method. Instead it exposes a public function (acpi_identify()) which is a probe routine that the MD nexus(4) drivers can use to probe for ACPI. All of the probe logic in acpi_probe() is now moved into acpi_identify() and acpi_probe() is just a stub. - On i386 and amd64, an ACPI-specific nexus(4) driver checks for ACPI via acpi_identify() and claims the nexus0 device if the probe succeeds. It then explicitly adds an acpi0 device in its attach routine. - The legacy(4) driver no longer knows anything about the acpi0 device. - On ia64 if acpi_identify() fails you basically end up with no devices. This matches the previous behavior where the old acpi_identify() would fail to add an acpi0 device again leaving you with no devices. Discussed with: imp Silence on: arch@ 177157 Thu Mar 13 18:39:04 MDT 2008 jhb Rework how the nexus(4) device works on x86 to better handle the idea of different "platforms" on x86 machines. The existing code already handles having two platforms: ACPI and legacy. However, the existing approach was rather hardcoded and difficult to extend. These changes take the approach that each x86 hardware platform should provide its own nexus(4) driver (it can inherit most of its behavior from the default legacy nexus(4) driver) which is responsible for probing for the platform and performing appropriate platform-specific setup during attach (such as adding a platform-specific bus device). This does mean changing the x86 platform busses to no longer use an identify routine for probing, but to move that logic into their matching nexus(4) driver instead. - Make the default nexus(4) driver in nexus.c on i386 and amd64 handle the legacy platform. It's probe routine now returns BUS_PROBE_GENERIC so it can be overriden. - Expose a nexus_init_resources() routine which initializes the various resource managers so that subclassed nexus(4) drivers can invoke it from their attach routine. - The legacy nexus(4) driver explicitly adds a legacy0 device in its attach routine. - The ACPI driver no longer contains an new-bus identify method. Instead it exposes a public function (acpi_identify()) which is a probe routine that the MD nexus(4) drivers can use to probe for ACPI. All of the probe logic in acpi_probe() is now moved into acpi_identify() and acpi_probe() is just a stub. - On i386 and amd64, an ACPI-specific nexus(4) driver checks for ACPI via acpi_identify() and claims the nexus0 device if the probe succeeds. It then explicitly adds an acpi0 device in its attach routine. - The legacy(4) driver no longer knows anything about the acpi0 device. - On ia64 if acpi_identify() fails you basically end up with no devices. This matches the previous behavior where the old acpi_identify() would fail to add an acpi0 device again leaving you with no devices. Discussed with: imp Silence on: arch@ 177157 Thu Mar 13 18:39:04 MDT 2008 jhb Rework how the nexus(4) device works on x86 to better handle the idea of different "platforms" on x86 machines. The existing code already handles having two platforms: ACPI and legacy. However, the existing approach was rather hardcoded and difficult to extend. These changes take the approach that each x86 hardware platform should provide its own nexus(4) driver (it can inherit most of its behavior from the default legacy nexus(4) driver) which is responsible for probing for the platform and performing appropriate platform-specific setup during attach (such as adding a platform-specific bus device). This does mean changing the x86 platform busses to no longer use an identify routine for probing, but to move that logic into their matching nexus(4) driver instead. - Make the default nexus(4) driver in nexus.c on i386 and amd64 handle the legacy platform. It's probe routine now returns BUS_PROBE_GENERIC so it can be overriden. - Expose a nexus_init_resources() routine which initializes the various resource managers so that subclassed nexus(4) drivers can invoke it from their attach routine. - The legacy nexus(4) driver explicitly adds a legacy0 device in its attach routine. - The ACPI driver no longer contains an new-bus identify method. Instead it exposes a public function (acpi_identify()) which is a probe routine that the MD nexus(4) drivers can use to probe for ACPI. All of the probe logic in acpi_probe() is now moved into acpi_identify() and acpi_probe() is just a stub. - On i386 and amd64, an ACPI-specific nexus(4) driver checks for ACPI via acpi_identify() and claims the nexus0 device if the probe succeeds. It then explicitly adds an acpi0 device in its attach routine. - The legacy(4) driver no longer knows anything about the acpi0 device. - On ia64 if acpi_identify() fails you basically end up with no devices. This matches the previous behavior where the old acpi_identify() would fail to add an acpi0 device again leaving you with no devices. Discussed with: imp Silence on: arch@ 177157 Thu Mar 13 18:39:04 MDT 2008 jhb Rework how the nexus(4) device works on x86 to better handle the idea of different "platforms" on x86 machines. The existing code already handles having two platforms: ACPI and legacy. However, the existing approach was rather hardcoded and difficult to extend. These changes take the approach that each x86 hardware platform should provide its own nexus(4) driver (it can inherit most of its behavior from the default legacy nexus(4) driver) which is responsible for probing for the platform and performing appropriate platform-specific setup during attach (such as adding a platform-specific bus device). This does mean changing the x86 platform busses to no longer use an identify routine for probing, but to move that logic into their matching nexus(4) driver instead. - Make the default nexus(4) driver in nexus.c on i386 and amd64 handle the legacy platform. It's probe routine now returns BUS_PROBE_GENERIC so it can be overriden. - Expose a nexus_init_resources() routine which initializes the various resource managers so that subclassed nexus(4) drivers can invoke it from their attach routine. - The legacy nexus(4) driver explicitly adds a legacy0 device in its attach routine. - The ACPI driver no longer contains an new-bus identify method. Instead it exposes a public function (acpi_identify()) which is a probe routine that the MD nexus(4) drivers can use to probe for ACPI. All of the probe logic in acpi_probe() is now moved into acpi_identify() and acpi_probe() is just a stub. - On i386 and amd64, an ACPI-specific nexus(4) driver checks for ACPI via acpi_identify() and claims the nexus0 device if the probe succeeds. It then explicitly adds an acpi0 device in its attach routine. - The legacy(4) driver no longer knows anything about the acpi0 device. - On ia64 if acpi_identify() fails you basically end up with no devices. This matches the previous behavior where the old acpi_identify() would fail to add an acpi0 device again leaving you with no devices. Discussed with: imp Silence on: arch@ 177157 Thu Mar 13 18:39:04 MDT 2008 jhb Rework how the nexus(4) device works on x86 to better handle the idea of different "platforms" on x86 machines. The existing code already handles having two platforms: ACPI and legacy. However, the existing approach was rather hardcoded and difficult to extend. These changes take the approach that each x86 hardware platform should provide its own nexus(4) driver (it can inherit most of its behavior from the default legacy nexus(4) driver) which is responsible for probing for the platform and performing appropriate platform-specific setup during attach (such as adding a platform-specific bus device). This does mean changing the x86 platform busses to no longer use an identify routine for probing, but to move that logic into their matching nexus(4) driver instead. - Make the default nexus(4) driver in nexus.c on i386 and amd64 handle the legacy platform. It's probe routine now returns BUS_PROBE_GENERIC so it can be overriden. - Expose a nexus_init_resources() routine which initializes the various resource managers so that subclassed nexus(4) drivers can invoke it from their attach routine. - The legacy nexus(4) driver explicitly adds a legacy0 device in its attach routine. - The ACPI driver no longer contains an new-bus identify method. Instead it exposes a public function (acpi_identify()) which is a probe routine that the MD nexus(4) drivers can use to probe for ACPI. All of the probe logic in acpi_probe() is now moved into acpi_identify() and acpi_probe() is just a stub. - On i386 and amd64, an ACPI-specific nexus(4) driver checks for ACPI via acpi_identify() and claims the nexus0 device if the probe succeeds. It then explicitly adds an acpi0 device in its attach routine. - The legacy(4) driver no longer knows anything about the acpi0 device. - On ia64 if acpi_identify() fails you basically end up with no devices. This matches the previous behavior where the old acpi_identify() would fail to add an acpi0 device again leaving you with no devices. Discussed with: imp Silence on: arch@ 177157 Thu Mar 13 18:39:04 MDT 2008 jhb Rework how the nexus(4) device works on x86 to better handle the idea of different "platforms" on x86 machines. The existing code already handles having two platforms: ACPI and legacy. However, the existing approach was rather hardcoded and difficult to extend. These changes take the approach that each x86 hardware platform should provide its own nexus(4) driver (it can inherit most of its behavior from the default legacy nexus(4) driver) which is responsible for probing for the platform and performing appropriate platform-specific setup during attach (such as adding a platform-specific bus device). This does mean changing the x86 platform busses to no longer use an identify routine for probing, but to move that logic into their matching nexus(4) driver instead. - Make the default nexus(4) driver in nexus.c on i386 and amd64 handle the legacy platform. It's probe routine now returns BUS_PROBE_GENERIC so it can be overriden. - Expose a nexus_init_resources() routine which initializes the various resource managers so that subclassed nexus(4) drivers can invoke it from their attach routine. - The legacy nexus(4) driver explicitly adds a legacy0 device in its attach routine. - The ACPI driver no longer contains an new-bus identify method. Instead it exposes a public function (acpi_identify()) which is a probe routine that the MD nexus(4) drivers can use to probe for ACPI. All of the probe logic in acpi_probe() is now moved into acpi_identify() and acpi_probe() is just a stub. - On i386 and amd64, an ACPI-specific nexus(4) driver checks for ACPI via acpi_identify() and claims the nexus0 device if the probe succeeds. It then explicitly adds an acpi0 device in its attach routine. - The legacy(4) driver no longer knows anything about the acpi0 device. - On ia64 if acpi_identify() fails you basically end up with no devices. This matches the previous behavior where the old acpi_identify() would fail to add an acpi0 device again leaving you with no devices. Discussed with: imp Silence on: arch@ 177157 Thu Mar 13 18:39:04 MDT 2008 jhb Rework how the nexus(4) device works on x86 to better handle the idea of different "platforms" on x86 machines. The existing code already handles having two platforms: ACPI and legacy. However, the existing approach was rather hardcoded and difficult to extend. These changes take the approach that each x86 hardware platform should provide its own nexus(4) driver (it can inherit most of its behavior from the default legacy nexus(4) driver) which is responsible for probing for the platform and performing appropriate platform-specific setup during attach (such as adding a platform-specific bus device). This does mean changing the x86 platform busses to no longer use an identify routine for probing, but to move that logic into their matching nexus(4) driver instead. - Make the default nexus(4) driver in nexus.c on i386 and amd64 handle the legacy platform. It's probe routine now returns BUS_PROBE_GENERIC so it can be overriden. - Expose a nexus_init_resources() routine which initializes the various resource managers so that subclassed nexus(4) drivers can invoke it from their attach routine. - The legacy nexus(4) driver explicitly adds a legacy0 device in its attach routine. - The ACPI driver no longer contains an new-bus identify method. Instead it exposes a public function (acpi_identify()) which is a probe routine that the MD nexus(4) drivers can use to probe for ACPI. All of the probe logic in acpi_probe() is now moved into acpi_identify() and acpi_probe() is just a stub. - On i386 and amd64, an ACPI-specific nexus(4) driver checks for ACPI via acpi_identify() and claims the nexus0 device if the probe succeeds. It then explicitly adds an acpi0 device in its attach routine. - The legacy(4) driver no longer knows anything about the acpi0 device. - On ia64 if acpi_identify() fails you basically end up with no devices. This matches the previous behavior where the old acpi_identify() would fail to add an acpi0 device again leaving you with no devices. Discussed with: imp Silence on: arch@ 177157 Thu Mar 13 18:39:04 MDT 2008 jhb Rework how the nexus(4) device works on x86 to better handle the idea of different "platforms" on x86 machines. The existing code already handles having two platforms: ACPI and legacy. However, the existing approach was rather hardcoded and difficult to extend. These changes take the approach that each x86 hardware platform should provide its own nexus(4) driver (it can inherit most of its behavior from the default legacy nexus(4) driver) which is responsible for probing for the platform and performing appropriate platform-specific setup during attach (such as adding a platform-specific bus device). This does mean changing the x86 platform busses to no longer use an identify routine for probing, but to move that logic into their matching nexus(4) driver instead. - Make the default nexus(4) driver in nexus.c on i386 and amd64 handle the legacy platform. It's probe routine now returns BUS_PROBE_GENERIC so it can be overriden. - Expose a nexus_init_resources() routine which initializes the various resource managers so that subclassed nexus(4) drivers can invoke it from their attach routine. - The legacy nexus(4) driver explicitly adds a legacy0 device in its attach routine. - The ACPI driver no longer contains an new-bus identify method. Instead it exposes a public function (acpi_identify()) which is a probe routine that the MD nexus(4) drivers can use to probe for ACPI. All of the probe logic in acpi_probe() is now moved into acpi_identify() and acpi_probe() is just a stub. - On i386 and amd64, an ACPI-specific nexus(4) driver checks for ACPI via acpi_identify() and claims the nexus0 device if the probe succeeds. It then explicitly adds an acpi0 device in its attach routine. - The legacy(4) driver no longer knows anything about the acpi0 device. - On ia64 if acpi_identify() fails you basically end up with no devices. This matches the previous behavior where the old acpi_identify() would fail to add an acpi0 device again leaving you with no devices. Discussed with: imp Silence on: arch@ 177157 Thu Mar 13 18:39:04 MDT 2008 jhb Rework how the nexus(4) device works on x86 to better handle the idea of different "platforms" on x86 machines. The existing code already handles having two platforms: ACPI and legacy. However, the existing approach was rather hardcoded and difficult to extend. These changes take the approach that each x86 hardware platform should provide its own nexus(4) driver (it can inherit most of its behavior from the default legacy nexus(4) driver) which is responsible for probing for the platform and performing appropriate platform-specific setup during attach (such as adding a platform-specific bus device). This does mean changing the x86 platform busses to no longer use an identify routine for probing, but to move that logic into their matching nexus(4) driver instead. - Make the default nexus(4) driver in nexus.c on i386 and amd64 handle the legacy platform. It's probe routine now returns BUS_PROBE_GENERIC so it can be overriden. - Expose a nexus_init_resources() routine which initializes the various resource managers so that subclassed nexus(4) drivers can invoke it from their attach routine. - The legacy nexus(4) driver explicitly adds a legacy0 device in its attach routine. - The ACPI driver no longer contains an new-bus identify method. Instead it exposes a public function (acpi_identify()) which is a probe routine that the MD nexus(4) drivers can use to probe for ACPI. All of the probe logic in acpi_probe() is now moved into acpi_identify() and acpi_probe() is just a stub. - On i386 and amd64, an ACPI-specific nexus(4) driver checks for ACPI via acpi_identify() and claims the nexus0 device if the probe succeeds. It then explicitly adds an acpi0 device in its attach routine. - The legacy(4) driver no longer knows anything about the acpi0 device. - On ia64 if acpi_identify() fails you basically end up with no devices. This matches the previous behavior where the old acpi_identify() would fail to add an acpi0 device again leaving you with no devices. Discussed with: imp Silence on: arch@ |
/freebsd-9.3-release/sys/i386/include/ | ||
H A D | nexusvar.h | 177157 Thu Mar 13 18:39:04 MDT 2008 jhb Rework how the nexus(4) device works on x86 to better handle the idea of different "platforms" on x86 machines. The existing code already handles having two platforms: ACPI and legacy. However, the existing approach was rather hardcoded and difficult to extend. These changes take the approach that each x86 hardware platform should provide its own nexus(4) driver (it can inherit most of its behavior from the default legacy nexus(4) driver) which is responsible for probing for the platform and performing appropriate platform-specific setup during attach (such as adding a platform-specific bus device). This does mean changing the x86 platform busses to no longer use an identify routine for probing, but to move that logic into their matching nexus(4) driver instead. - Make the default nexus(4) driver in nexus.c on i386 and amd64 handle the legacy platform. It's probe routine now returns BUS_PROBE_GENERIC so it can be overriden. - Expose a nexus_init_resources() routine which initializes the various resource managers so that subclassed nexus(4) drivers can invoke it from their attach routine. - The legacy nexus(4) driver explicitly adds a legacy0 device in its attach routine. - The ACPI driver no longer contains an new-bus identify method. Instead it exposes a public function (acpi_identify()) which is a probe routine that the MD nexus(4) drivers can use to probe for ACPI. All of the probe logic in acpi_probe() is now moved into acpi_identify() and acpi_probe() is just a stub. - On i386 and amd64, an ACPI-specific nexus(4) driver checks for ACPI via acpi_identify() and claims the nexus0 device if the probe succeeds. It then explicitly adds an acpi0 device in its attach routine. - The legacy(4) driver no longer knows anything about the acpi0 device. - On ia64 if acpi_identify() fails you basically end up with no devices. This matches the previous behavior where the old acpi_identify() would fail to add an acpi0 device again leaving you with no devices. Discussed with: imp Silence on: arch@ 177157 Thu Mar 13 18:39:04 MDT 2008 jhb Rework how the nexus(4) device works on x86 to better handle the idea of different "platforms" on x86 machines. The existing code already handles having two platforms: ACPI and legacy. However, the existing approach was rather hardcoded and difficult to extend. These changes take the approach that each x86 hardware platform should provide its own nexus(4) driver (it can inherit most of its behavior from the default legacy nexus(4) driver) which is responsible for probing for the platform and performing appropriate platform-specific setup during attach (such as adding a platform-specific bus device). This does mean changing the x86 platform busses to no longer use an identify routine for probing, but to move that logic into their matching nexus(4) driver instead. - Make the default nexus(4) driver in nexus.c on i386 and amd64 handle the legacy platform. It's probe routine now returns BUS_PROBE_GENERIC so it can be overriden. - Expose a nexus_init_resources() routine which initializes the various resource managers so that subclassed nexus(4) drivers can invoke it from their attach routine. - The legacy nexus(4) driver explicitly adds a legacy0 device in its attach routine. - The ACPI driver no longer contains an new-bus identify method. Instead it exposes a public function (acpi_identify()) which is a probe routine that the MD nexus(4) drivers can use to probe for ACPI. All of the probe logic in acpi_probe() is now moved into acpi_identify() and acpi_probe() is just a stub. - On i386 and amd64, an ACPI-specific nexus(4) driver checks for ACPI via acpi_identify() and claims the nexus0 device if the probe succeeds. It then explicitly adds an acpi0 device in its attach routine. - The legacy(4) driver no longer knows anything about the acpi0 device. - On ia64 if acpi_identify() fails you basically end up with no devices. This matches the previous behavior where the old acpi_identify() would fail to add an acpi0 device again leaving you with no devices. Discussed with: imp Silence on: arch@ 177157 Thu Mar 13 18:39:04 MDT 2008 jhb Rework how the nexus(4) device works on x86 to better handle the idea of different "platforms" on x86 machines. The existing code already handles having two platforms: ACPI and legacy. However, the existing approach was rather hardcoded and difficult to extend. These changes take the approach that each x86 hardware platform should provide its own nexus(4) driver (it can inherit most of its behavior from the default legacy nexus(4) driver) which is responsible for probing for the platform and performing appropriate platform-specific setup during attach (such as adding a platform-specific bus device). This does mean changing the x86 platform busses to no longer use an identify routine for probing, but to move that logic into their matching nexus(4) driver instead. - Make the default nexus(4) driver in nexus.c on i386 and amd64 handle the legacy platform. It's probe routine now returns BUS_PROBE_GENERIC so it can be overriden. - Expose a nexus_init_resources() routine which initializes the various resource managers so that subclassed nexus(4) drivers can invoke it from their attach routine. - The legacy nexus(4) driver explicitly adds a legacy0 device in its attach routine. - The ACPI driver no longer contains an new-bus identify method. Instead it exposes a public function (acpi_identify()) which is a probe routine that the MD nexus(4) drivers can use to probe for ACPI. All of the probe logic in acpi_probe() is now moved into acpi_identify() and acpi_probe() is just a stub. - On i386 and amd64, an ACPI-specific nexus(4) driver checks for ACPI via acpi_identify() and claims the nexus0 device if the probe succeeds. It then explicitly adds an acpi0 device in its attach routine. - The legacy(4) driver no longer knows anything about the acpi0 device. - On ia64 if acpi_identify() fails you basically end up with no devices. This matches the previous behavior where the old acpi_identify() would fail to add an acpi0 device again leaving you with no devices. Discussed with: imp Silence on: arch@ 177157 Thu Mar 13 18:39:04 MDT 2008 jhb Rework how the nexus(4) device works on x86 to better handle the idea of different "platforms" on x86 machines. The existing code already handles having two platforms: ACPI and legacy. However, the existing approach was rather hardcoded and difficult to extend. These changes take the approach that each x86 hardware platform should provide its own nexus(4) driver (it can inherit most of its behavior from the default legacy nexus(4) driver) which is responsible for probing for the platform and performing appropriate platform-specific setup during attach (such as adding a platform-specific bus device). This does mean changing the x86 platform busses to no longer use an identify routine for probing, but to move that logic into their matching nexus(4) driver instead. - Make the default nexus(4) driver in nexus.c on i386 and amd64 handle the legacy platform. It's probe routine now returns BUS_PROBE_GENERIC so it can be overriden. - Expose a nexus_init_resources() routine which initializes the various resource managers so that subclassed nexus(4) drivers can invoke it from their attach routine. - The legacy nexus(4) driver explicitly adds a legacy0 device in its attach routine. - The ACPI driver no longer contains an new-bus identify method. Instead it exposes a public function (acpi_identify()) which is a probe routine that the MD nexus(4) drivers can use to probe for ACPI. All of the probe logic in acpi_probe() is now moved into acpi_identify() and acpi_probe() is just a stub. - On i386 and amd64, an ACPI-specific nexus(4) driver checks for ACPI via acpi_identify() and claims the nexus0 device if the probe succeeds. It then explicitly adds an acpi0 device in its attach routine. - The legacy(4) driver no longer knows anything about the acpi0 device. - On ia64 if acpi_identify() fails you basically end up with no devices. This matches the previous behavior where the old acpi_identify() would fail to add an acpi0 device again leaving you with no devices. Discussed with: imp Silence on: arch@ 177157 Thu Mar 13 18:39:04 MDT 2008 jhb Rework how the nexus(4) device works on x86 to better handle the idea of different "platforms" on x86 machines. The existing code already handles having two platforms: ACPI and legacy. However, the existing approach was rather hardcoded and difficult to extend. These changes take the approach that each x86 hardware platform should provide its own nexus(4) driver (it can inherit most of its behavior from the default legacy nexus(4) driver) which is responsible for probing for the platform and performing appropriate platform-specific setup during attach (such as adding a platform-specific bus device). This does mean changing the x86 platform busses to no longer use an identify routine for probing, but to move that logic into their matching nexus(4) driver instead. - Make the default nexus(4) driver in nexus.c on i386 and amd64 handle the legacy platform. It's probe routine now returns BUS_PROBE_GENERIC so it can be overriden. - Expose a nexus_init_resources() routine which initializes the various resource managers so that subclassed nexus(4) drivers can invoke it from their attach routine. - The legacy nexus(4) driver explicitly adds a legacy0 device in its attach routine. - The ACPI driver no longer contains an new-bus identify method. Instead it exposes a public function (acpi_identify()) which is a probe routine that the MD nexus(4) drivers can use to probe for ACPI. All of the probe logic in acpi_probe() is now moved into acpi_identify() and acpi_probe() is just a stub. - On i386 and amd64, an ACPI-specific nexus(4) driver checks for ACPI via acpi_identify() and claims the nexus0 device if the probe succeeds. It then explicitly adds an acpi0 device in its attach routine. - The legacy(4) driver no longer knows anything about the acpi0 device. - On ia64 if acpi_identify() fails you basically end up with no devices. This matches the previous behavior where the old acpi_identify() would fail to add an acpi0 device again leaving you with no devices. Discussed with: imp Silence on: arch@ 177157 Thu Mar 13 18:39:04 MDT 2008 jhb Rework how the nexus(4) device works on x86 to better handle the idea of different "platforms" on x86 machines. The existing code already handles having two platforms: ACPI and legacy. However, the existing approach was rather hardcoded and difficult to extend. These changes take the approach that each x86 hardware platform should provide its own nexus(4) driver (it can inherit most of its behavior from the default legacy nexus(4) driver) which is responsible for probing for the platform and performing appropriate platform-specific setup during attach (such as adding a platform-specific bus device). This does mean changing the x86 platform busses to no longer use an identify routine for probing, but to move that logic into their matching nexus(4) driver instead. - Make the default nexus(4) driver in nexus.c on i386 and amd64 handle the legacy platform. It's probe routine now returns BUS_PROBE_GENERIC so it can be overriden. - Expose a nexus_init_resources() routine which initializes the various resource managers so that subclassed nexus(4) drivers can invoke it from their attach routine. - The legacy nexus(4) driver explicitly adds a legacy0 device in its attach routine. - The ACPI driver no longer contains an new-bus identify method. Instead it exposes a public function (acpi_identify()) which is a probe routine that the MD nexus(4) drivers can use to probe for ACPI. All of the probe logic in acpi_probe() is now moved into acpi_identify() and acpi_probe() is just a stub. - On i386 and amd64, an ACPI-specific nexus(4) driver checks for ACPI via acpi_identify() and claims the nexus0 device if the probe succeeds. It then explicitly adds an acpi0 device in its attach routine. - The legacy(4) driver no longer knows anything about the acpi0 device. - On ia64 if acpi_identify() fails you basically end up with no devices. This matches the previous behavior where the old acpi_identify() would fail to add an acpi0 device again leaving you with no devices. Discussed with: imp Silence on: arch@ 177157 Thu Mar 13 18:39:04 MDT 2008 jhb Rework how the nexus(4) device works on x86 to better handle the idea of different "platforms" on x86 machines. The existing code already handles having two platforms: ACPI and legacy. However, the existing approach was rather hardcoded and difficult to extend. These changes take the approach that each x86 hardware platform should provide its own nexus(4) driver (it can inherit most of its behavior from the default legacy nexus(4) driver) which is responsible for probing for the platform and performing appropriate platform-specific setup during attach (such as adding a platform-specific bus device). This does mean changing the x86 platform busses to no longer use an identify routine for probing, but to move that logic into their matching nexus(4) driver instead. - Make the default nexus(4) driver in nexus.c on i386 and amd64 handle the legacy platform. It's probe routine now returns BUS_PROBE_GENERIC so it can be overriden. - Expose a nexus_init_resources() routine which initializes the various resource managers so that subclassed nexus(4) drivers can invoke it from their attach routine. - The legacy nexus(4) driver explicitly adds a legacy0 device in its attach routine. - The ACPI driver no longer contains an new-bus identify method. Instead it exposes a public function (acpi_identify()) which is a probe routine that the MD nexus(4) drivers can use to probe for ACPI. All of the probe logic in acpi_probe() is now moved into acpi_identify() and acpi_probe() is just a stub. - On i386 and amd64, an ACPI-specific nexus(4) driver checks for ACPI via acpi_identify() and claims the nexus0 device if the probe succeeds. It then explicitly adds an acpi0 device in its attach routine. - The legacy(4) driver no longer knows anything about the acpi0 device. - On ia64 if acpi_identify() fails you basically end up with no devices. This matches the previous behavior where the old acpi_identify() would fail to add an acpi0 device again leaving you with no devices. Discussed with: imp Silence on: arch@ 177157 Thu Mar 13 18:39:04 MDT 2008 jhb Rework how the nexus(4) device works on x86 to better handle the idea of different "platforms" on x86 machines. The existing code already handles having two platforms: ACPI and legacy. However, the existing approach was rather hardcoded and difficult to extend. These changes take the approach that each x86 hardware platform should provide its own nexus(4) driver (it can inherit most of its behavior from the default legacy nexus(4) driver) which is responsible for probing for the platform and performing appropriate platform-specific setup during attach (such as adding a platform-specific bus device). This does mean changing the x86 platform busses to no longer use an identify routine for probing, but to move that logic into their matching nexus(4) driver instead. - Make the default nexus(4) driver in nexus.c on i386 and amd64 handle the legacy platform. It's probe routine now returns BUS_PROBE_GENERIC so it can be overriden. - Expose a nexus_init_resources() routine which initializes the various resource managers so that subclassed nexus(4) drivers can invoke it from their attach routine. - The legacy nexus(4) driver explicitly adds a legacy0 device in its attach routine. - The ACPI driver no longer contains an new-bus identify method. Instead it exposes a public function (acpi_identify()) which is a probe routine that the MD nexus(4) drivers can use to probe for ACPI. All of the probe logic in acpi_probe() is now moved into acpi_identify() and acpi_probe() is just a stub. - On i386 and amd64, an ACPI-specific nexus(4) driver checks for ACPI via acpi_identify() and claims the nexus0 device if the probe succeeds. It then explicitly adds an acpi0 device in its attach routine. - The legacy(4) driver no longer knows anything about the acpi0 device. - On ia64 if acpi_identify() fails you basically end up with no devices. This matches the previous behavior where the old acpi_identify() would fail to add an acpi0 device again leaving you with no devices. Discussed with: imp Silence on: arch@ 177157 Thu Mar 13 18:39:04 MDT 2008 jhb Rework how the nexus(4) device works on x86 to better handle the idea of different "platforms" on x86 machines. The existing code already handles having two platforms: ACPI and legacy. However, the existing approach was rather hardcoded and difficult to extend. These changes take the approach that each x86 hardware platform should provide its own nexus(4) driver (it can inherit most of its behavior from the default legacy nexus(4) driver) which is responsible for probing for the platform and performing appropriate platform-specific setup during attach (such as adding a platform-specific bus device). This does mean changing the x86 platform busses to no longer use an identify routine for probing, but to move that logic into their matching nexus(4) driver instead. - Make the default nexus(4) driver in nexus.c on i386 and amd64 handle the legacy platform. It's probe routine now returns BUS_PROBE_GENERIC so it can be overriden. - Expose a nexus_init_resources() routine which initializes the various resource managers so that subclassed nexus(4) drivers can invoke it from their attach routine. - The legacy nexus(4) driver explicitly adds a legacy0 device in its attach routine. - The ACPI driver no longer contains an new-bus identify method. Instead it exposes a public function (acpi_identify()) which is a probe routine that the MD nexus(4) drivers can use to probe for ACPI. All of the probe logic in acpi_probe() is now moved into acpi_identify() and acpi_probe() is just a stub. - On i386 and amd64, an ACPI-specific nexus(4) driver checks for ACPI via acpi_identify() and claims the nexus0 device if the probe succeeds. It then explicitly adds an acpi0 device in its attach routine. - The legacy(4) driver no longer knows anything about the acpi0 device. - On ia64 if acpi_identify() fails you basically end up with no devices. This matches the previous behavior where the old acpi_identify() would fail to add an acpi0 device again leaving you with no devices. Discussed with: imp Silence on: arch@ 177157 Thu Mar 13 18:39:04 MDT 2008 jhb Rework how the nexus(4) device works on x86 to better handle the idea of different "platforms" on x86 machines. The existing code already handles having two platforms: ACPI and legacy. However, the existing approach was rather hardcoded and difficult to extend. These changes take the approach that each x86 hardware platform should provide its own nexus(4) driver (it can inherit most of its behavior from the default legacy nexus(4) driver) which is responsible for probing for the platform and performing appropriate platform-specific setup during attach (such as adding a platform-specific bus device). This does mean changing the x86 platform busses to no longer use an identify routine for probing, but to move that logic into their matching nexus(4) driver instead. - Make the default nexus(4) driver in nexus.c on i386 and amd64 handle the legacy platform. It's probe routine now returns BUS_PROBE_GENERIC so it can be overriden. - Expose a nexus_init_resources() routine which initializes the various resource managers so that subclassed nexus(4) drivers can invoke it from their attach routine. - The legacy nexus(4) driver explicitly adds a legacy0 device in its attach routine. - The ACPI driver no longer contains an new-bus identify method. Instead it exposes a public function (acpi_identify()) which is a probe routine that the MD nexus(4) drivers can use to probe for ACPI. All of the probe logic in acpi_probe() is now moved into acpi_identify() and acpi_probe() is just a stub. - On i386 and amd64, an ACPI-specific nexus(4) driver checks for ACPI via acpi_identify() and claims the nexus0 device if the probe succeeds. It then explicitly adds an acpi0 device in its attach routine. - The legacy(4) driver no longer knows anything about the acpi0 device. - On ia64 if acpi_identify() fails you basically end up with no devices. This matches the previous behavior where the old acpi_identify() would fail to add an acpi0 device again leaving you with no devices. Discussed with: imp Silence on: arch@ |
/freebsd-9.3-release/sys/dev/ppc/ | ||
H A D | ppc_puc.c | diff 187576 Wed Jan 21 21:14:29 MST 2009 jhb Add locking to ppc and ppbus and mark the whole lot MPSAFE: - To avoid having a bunch of locks that end up always getting acquired as a group, give each ppc(4) device a mutex which it shares with all the child devices including ppbus(4), lpt(4), plip(4), etc. This mutex is then used for all the locking. - Rework the interrupt handling stuff yet again. Now ppbus drivers setup their interrupt handler during attach and tear it down during detach like most other drivers. ppbus(4) only invokes the interrupt handler of the device that currently owns the bus (if any) when an interrupt occurs, however. Also, interrupt handlers in general now accept their softc pointers as their argument rather than the device_t. Another feature of the ppbus interrupt handlers is that they are called with the parent ppc device's lock already held. This minimizes the number of lock operations during an interrupt. - Mark plip(4), lpt(4), pcfclock(4), ppi(4), vpo(4) MPSAFE. - lpbb(4) uses the ppc lock instead of Giant. - Other plip(4) changes: - Add a mutex to protect the global tables in plip(4) and free them on module unload. - Add a detach routine. - Split out the init/stop code from the ioctl routine into separate functions. - Other lpt(4) changes: - Use device_printf(). - Use a dedicated callout for the lptout timer. - Allocate the I/O buffers at attach and detach rather than during open and close as this simplifies the locking at the cost of 1024+32 bytes when the driver is attached. - Other ppi(4) changes: - Use an sx lock to serialize open and close. - Remove unused HADBUS flag. - Add a detach routine. - Use a malloc'd buffer for each read and write to avoid races with concurrent read/write. - Other pps(4) changes: - Use a callout rather than a callout handle with timeout(). - Conform to the new ppbus requirements (regular mutex, non-filter interrupt handler). pps(4) is probably going to have to become a standalone driver that doesn't use ppbus(4) to satisfy it's requirements for low latency as a result. - Use an sx lock to serialize open and close. - Other vpo(4) changes: - Use the parent ppc device's lock to create the CAM sim instead of Giant. - Other ppc(4) changes: - Fix ppc_isa's detach method to detach instead of calling attach. Tested by: no one :-( diff 187576 Wed Jan 21 21:14:29 MST 2009 jhb Add locking to ppc and ppbus and mark the whole lot MPSAFE: - To avoid having a bunch of locks that end up always getting acquired as a group, give each ppc(4) device a mutex which it shares with all the child devices including ppbus(4), lpt(4), plip(4), etc. This mutex is then used for all the locking. - Rework the interrupt handling stuff yet again. Now ppbus drivers setup their interrupt handler during attach and tear it down during detach like most other drivers. ppbus(4) only invokes the interrupt handler of the device that currently owns the bus (if any) when an interrupt occurs, however. Also, interrupt handlers in general now accept their softc pointers as their argument rather than the device_t. Another feature of the ppbus interrupt handlers is that they are called with the parent ppc device's lock already held. This minimizes the number of lock operations during an interrupt. - Mark plip(4), lpt(4), pcfclock(4), ppi(4), vpo(4) MPSAFE. - lpbb(4) uses the ppc lock instead of Giant. - Other plip(4) changes: - Add a mutex to protect the global tables in plip(4) and free them on module unload. - Add a detach routine. - Split out the init/stop code from the ioctl routine into separate functions. - Other lpt(4) changes: - Use device_printf(). - Use a dedicated callout for the lptout timer. - Allocate the I/O buffers at attach and detach rather than during open and close as this simplifies the locking at the cost of 1024+32 bytes when the driver is attached. - Other ppi(4) changes: - Use an sx lock to serialize open and close. - Remove unused HADBUS flag. - Add a detach routine. - Use a malloc'd buffer for each read and write to avoid races with concurrent read/write. - Other pps(4) changes: - Use a callout rather than a callout handle with timeout(). - Conform to the new ppbus requirements (regular mutex, non-filter interrupt handler). pps(4) is probably going to have to become a standalone driver that doesn't use ppbus(4) to satisfy it's requirements for low latency as a result. - Use an sx lock to serialize open and close. - Other vpo(4) changes: - Use the parent ppc device's lock to create the CAM sim instead of Giant. - Other ppc(4) changes: - Fix ppc_isa's detach method to detach instead of calling attach. Tested by: no one :-( diff 187576 Wed Jan 21 21:14:29 MST 2009 jhb Add locking to ppc and ppbus and mark the whole lot MPSAFE: - To avoid having a bunch of locks that end up always getting acquired as a group, give each ppc(4) device a mutex which it shares with all the child devices including ppbus(4), lpt(4), plip(4), etc. This mutex is then used for all the locking. - Rework the interrupt handling stuff yet again. Now ppbus drivers setup their interrupt handler during attach and tear it down during detach like most other drivers. ppbus(4) only invokes the interrupt handler of the device that currently owns the bus (if any) when an interrupt occurs, however. Also, interrupt handlers in general now accept their softc pointers as their argument rather than the device_t. Another feature of the ppbus interrupt handlers is that they are called with the parent ppc device's lock already held. This minimizes the number of lock operations during an interrupt. - Mark plip(4), lpt(4), pcfclock(4), ppi(4), vpo(4) MPSAFE. - lpbb(4) uses the ppc lock instead of Giant. - Other plip(4) changes: - Add a mutex to protect the global tables in plip(4) and free them on module unload. - Add a detach routine. - Split out the init/stop code from the ioctl routine into separate functions. - Other lpt(4) changes: - Use device_printf(). - Use a dedicated callout for the lptout timer. - Allocate the I/O buffers at attach and detach rather than during open and close as this simplifies the locking at the cost of 1024+32 bytes when the driver is attached. - Other ppi(4) changes: - Use an sx lock to serialize open and close. - Remove unused HADBUS flag. - Add a detach routine. - Use a malloc'd buffer for each read and write to avoid races with concurrent read/write. - Other pps(4) changes: - Use a callout rather than a callout handle with timeout(). - Conform to the new ppbus requirements (regular mutex, non-filter interrupt handler). pps(4) is probably going to have to become a standalone driver that doesn't use ppbus(4) to satisfy it's requirements for low latency as a result. - Use an sx lock to serialize open and close. - Other vpo(4) changes: - Use the parent ppc device's lock to create the CAM sim instead of Giant. - Other ppc(4) changes: - Fix ppc_isa's detach method to detach instead of calling attach. Tested by: no one :-( diff 187576 Wed Jan 21 21:14:29 MST 2009 jhb Add locking to ppc and ppbus and mark the whole lot MPSAFE: - To avoid having a bunch of locks that end up always getting acquired as a group, give each ppc(4) device a mutex which it shares with all the child devices including ppbus(4), lpt(4), plip(4), etc. This mutex is then used for all the locking. - Rework the interrupt handling stuff yet again. Now ppbus drivers setup their interrupt handler during attach and tear it down during detach like most other drivers. ppbus(4) only invokes the interrupt handler of the device that currently owns the bus (if any) when an interrupt occurs, however. Also, interrupt handlers in general now accept their softc pointers as their argument rather than the device_t. Another feature of the ppbus interrupt handlers is that they are called with the parent ppc device's lock already held. This minimizes the number of lock operations during an interrupt. - Mark plip(4), lpt(4), pcfclock(4), ppi(4), vpo(4) MPSAFE. - lpbb(4) uses the ppc lock instead of Giant. - Other plip(4) changes: - Add a mutex to protect the global tables in plip(4) and free them on module unload. - Add a detach routine. - Split out the init/stop code from the ioctl routine into separate functions. - Other lpt(4) changes: - Use device_printf(). - Use a dedicated callout for the lptout timer. - Allocate the I/O buffers at attach and detach rather than during open and close as this simplifies the locking at the cost of 1024+32 bytes when the driver is attached. - Other ppi(4) changes: - Use an sx lock to serialize open and close. - Remove unused HADBUS flag. - Add a detach routine. - Use a malloc'd buffer for each read and write to avoid races with concurrent read/write. - Other pps(4) changes: - Use a callout rather than a callout handle with timeout(). - Conform to the new ppbus requirements (regular mutex, non-filter interrupt handler). pps(4) is probably going to have to become a standalone driver that doesn't use ppbus(4) to satisfy it's requirements for low latency as a result. - Use an sx lock to serialize open and close. - Other vpo(4) changes: - Use the parent ppc device's lock to create the CAM sim instead of Giant. - Other ppc(4) changes: - Fix ppc_isa's detach method to detach instead of calling attach. Tested by: no one :-( diff 187576 Wed Jan 21 21:14:29 MST 2009 jhb Add locking to ppc and ppbus and mark the whole lot MPSAFE: - To avoid having a bunch of locks that end up always getting acquired as a group, give each ppc(4) device a mutex which it shares with all the child devices including ppbus(4), lpt(4), plip(4), etc. This mutex is then used for all the locking. - Rework the interrupt handling stuff yet again. Now ppbus drivers setup their interrupt handler during attach and tear it down during detach like most other drivers. ppbus(4) only invokes the interrupt handler of the device that currently owns the bus (if any) when an interrupt occurs, however. Also, interrupt handlers in general now accept their softc pointers as their argument rather than the device_t. Another feature of the ppbus interrupt handlers is that they are called with the parent ppc device's lock already held. This minimizes the number of lock operations during an interrupt. - Mark plip(4), lpt(4), pcfclock(4), ppi(4), vpo(4) MPSAFE. - lpbb(4) uses the ppc lock instead of Giant. - Other plip(4) changes: - Add a mutex to protect the global tables in plip(4) and free them on module unload. - Add a detach routine. - Split out the init/stop code from the ioctl routine into separate functions. - Other lpt(4) changes: - Use device_printf(). - Use a dedicated callout for the lptout timer. - Allocate the I/O buffers at attach and detach rather than during open and close as this simplifies the locking at the cost of 1024+32 bytes when the driver is attached. - Other ppi(4) changes: - Use an sx lock to serialize open and close. - Remove unused HADBUS flag. - Add a detach routine. - Use a malloc'd buffer for each read and write to avoid races with concurrent read/write. - Other pps(4) changes: - Use a callout rather than a callout handle with timeout(). - Conform to the new ppbus requirements (regular mutex, non-filter interrupt handler). pps(4) is probably going to have to become a standalone driver that doesn't use ppbus(4) to satisfy it's requirements for low latency as a result. - Use an sx lock to serialize open and close. - Other vpo(4) changes: - Use the parent ppc device's lock to create the CAM sim instead of Giant. - Other ppc(4) changes: - Fix ppc_isa's detach method to detach instead of calling attach. Tested by: no one :-( diff 187576 Wed Jan 21 21:14:29 MST 2009 jhb Add locking to ppc and ppbus and mark the whole lot MPSAFE: - To avoid having a bunch of locks that end up always getting acquired as a group, give each ppc(4) device a mutex which it shares with all the child devices including ppbus(4), lpt(4), plip(4), etc. This mutex is then used for all the locking. - Rework the interrupt handling stuff yet again. Now ppbus drivers setup their interrupt handler during attach and tear it down during detach like most other drivers. ppbus(4) only invokes the interrupt handler of the device that currently owns the bus (if any) when an interrupt occurs, however. Also, interrupt handlers in general now accept their softc pointers as their argument rather than the device_t. Another feature of the ppbus interrupt handlers is that they are called with the parent ppc device's lock already held. This minimizes the number of lock operations during an interrupt. - Mark plip(4), lpt(4), pcfclock(4), ppi(4), vpo(4) MPSAFE. - lpbb(4) uses the ppc lock instead of Giant. - Other plip(4) changes: - Add a mutex to protect the global tables in plip(4) and free them on module unload. - Add a detach routine. - Split out the init/stop code from the ioctl routine into separate functions. - Other lpt(4) changes: - Use device_printf(). - Use a dedicated callout for the lptout timer. - Allocate the I/O buffers at attach and detach rather than during open and close as this simplifies the locking at the cost of 1024+32 bytes when the driver is attached. - Other ppi(4) changes: - Use an sx lock to serialize open and close. - Remove unused HADBUS flag. - Add a detach routine. - Use a malloc'd buffer for each read and write to avoid races with concurrent read/write. - Other pps(4) changes: - Use a callout rather than a callout handle with timeout(). - Conform to the new ppbus requirements (regular mutex, non-filter interrupt handler). pps(4) is probably going to have to become a standalone driver that doesn't use ppbus(4) to satisfy it's requirements for low latency as a result. - Use an sx lock to serialize open and close. - Other vpo(4) changes: - Use the parent ppc device's lock to create the CAM sim instead of Giant. - Other ppc(4) changes: - Fix ppc_isa's detach method to detach instead of calling attach. Tested by: no one :-( diff 187576 Wed Jan 21 21:14:29 MST 2009 jhb Add locking to ppc and ppbus and mark the whole lot MPSAFE: - To avoid having a bunch of locks that end up always getting acquired as a group, give each ppc(4) device a mutex which it shares with all the child devices including ppbus(4), lpt(4), plip(4), etc. This mutex is then used for all the locking. - Rework the interrupt handling stuff yet again. Now ppbus drivers setup their interrupt handler during attach and tear it down during detach like most other drivers. ppbus(4) only invokes the interrupt handler of the device that currently owns the bus (if any) when an interrupt occurs, however. Also, interrupt handlers in general now accept their softc pointers as their argument rather than the device_t. Another feature of the ppbus interrupt handlers is that they are called with the parent ppc device's lock already held. This minimizes the number of lock operations during an interrupt. - Mark plip(4), lpt(4), pcfclock(4), ppi(4), vpo(4) MPSAFE. - lpbb(4) uses the ppc lock instead of Giant. - Other plip(4) changes: - Add a mutex to protect the global tables in plip(4) and free them on module unload. - Add a detach routine. - Split out the init/stop code from the ioctl routine into separate functions. - Other lpt(4) changes: - Use device_printf(). - Use a dedicated callout for the lptout timer. - Allocate the I/O buffers at attach and detach rather than during open and close as this simplifies the locking at the cost of 1024+32 bytes when the driver is attached. - Other ppi(4) changes: - Use an sx lock to serialize open and close. - Remove unused HADBUS flag. - Add a detach routine. - Use a malloc'd buffer for each read and write to avoid races with concurrent read/write. - Other pps(4) changes: - Use a callout rather than a callout handle with timeout(). - Conform to the new ppbus requirements (regular mutex, non-filter interrupt handler). pps(4) is probably going to have to become a standalone driver that doesn't use ppbus(4) to satisfy it's requirements for low latency as a result. - Use an sx lock to serialize open and close. - Other vpo(4) changes: - Use the parent ppc device's lock to create the CAM sim instead of Giant. - Other ppc(4) changes: - Fix ppc_isa's detach method to detach instead of calling attach. Tested by: no one :-( diff 187576 Wed Jan 21 21:14:29 MST 2009 jhb Add locking to ppc and ppbus and mark the whole lot MPSAFE: - To avoid having a bunch of locks that end up always getting acquired as a group, give each ppc(4) device a mutex which it shares with all the child devices including ppbus(4), lpt(4), plip(4), etc. This mutex is then used for all the locking. - Rework the interrupt handling stuff yet again. Now ppbus drivers setup their interrupt handler during attach and tear it down during detach like most other drivers. ppbus(4) only invokes the interrupt handler of the device that currently owns the bus (if any) when an interrupt occurs, however. Also, interrupt handlers in general now accept their softc pointers as their argument rather than the device_t. Another feature of the ppbus interrupt handlers is that they are called with the parent ppc device's lock already held. This minimizes the number of lock operations during an interrupt. - Mark plip(4), lpt(4), pcfclock(4), ppi(4), vpo(4) MPSAFE. - lpbb(4) uses the ppc lock instead of Giant. - Other plip(4) changes: - Add a mutex to protect the global tables in plip(4) and free them on module unload. - Add a detach routine. - Split out the init/stop code from the ioctl routine into separate functions. - Other lpt(4) changes: - Use device_printf(). - Use a dedicated callout for the lptout timer. - Allocate the I/O buffers at attach and detach rather than during open and close as this simplifies the locking at the cost of 1024+32 bytes when the driver is attached. - Other ppi(4) changes: - Use an sx lock to serialize open and close. - Remove unused HADBUS flag. - Add a detach routine. - Use a malloc'd buffer for each read and write to avoid races with concurrent read/write. - Other pps(4) changes: - Use a callout rather than a callout handle with timeout(). - Conform to the new ppbus requirements (regular mutex, non-filter interrupt handler). pps(4) is probably going to have to become a standalone driver that doesn't use ppbus(4) to satisfy it's requirements for low latency as a result. - Use an sx lock to serialize open and close. - Other vpo(4) changes: - Use the parent ppc device's lock to create the CAM sim instead of Giant. - Other ppc(4) changes: - Fix ppc_isa's detach method to detach instead of calling attach. Tested by: no one :-( diff 187576 Wed Jan 21 21:14:29 MST 2009 jhb Add locking to ppc and ppbus and mark the whole lot MPSAFE: - To avoid having a bunch of locks that end up always getting acquired as a group, give each ppc(4) device a mutex which it shares with all the child devices including ppbus(4), lpt(4), plip(4), etc. This mutex is then used for all the locking. - Rework the interrupt handling stuff yet again. Now ppbus drivers setup their interrupt handler during attach and tear it down during detach like most other drivers. ppbus(4) only invokes the interrupt handler of the device that currently owns the bus (if any) when an interrupt occurs, however. Also, interrupt handlers in general now accept their softc pointers as their argument rather than the device_t. Another feature of the ppbus interrupt handlers is that they are called with the parent ppc device's lock already held. This minimizes the number of lock operations during an interrupt. - Mark plip(4), lpt(4), pcfclock(4), ppi(4), vpo(4) MPSAFE. - lpbb(4) uses the ppc lock instead of Giant. - Other plip(4) changes: - Add a mutex to protect the global tables in plip(4) and free them on module unload. - Add a detach routine. - Split out the init/stop code from the ioctl routine into separate functions. - Other lpt(4) changes: - Use device_printf(). - Use a dedicated callout for the lptout timer. - Allocate the I/O buffers at attach and detach rather than during open and close as this simplifies the locking at the cost of 1024+32 bytes when the driver is attached. - Other ppi(4) changes: - Use an sx lock to serialize open and close. - Remove unused HADBUS flag. - Add a detach routine. - Use a malloc'd buffer for each read and write to avoid races with concurrent read/write. - Other pps(4) changes: - Use a callout rather than a callout handle with timeout(). - Conform to the new ppbus requirements (regular mutex, non-filter interrupt handler). pps(4) is probably going to have to become a standalone driver that doesn't use ppbus(4) to satisfy it's requirements for low latency as a result. - Use an sx lock to serialize open and close. - Other vpo(4) changes: - Use the parent ppc device's lock to create the CAM sim instead of Giant. - Other ppc(4) changes: - Fix ppc_isa's detach method to detach instead of calling attach. Tested by: no one :-( diff 187576 Wed Jan 21 21:14:29 MST 2009 jhb Add locking to ppc and ppbus and mark the whole lot MPSAFE: - To avoid having a bunch of locks that end up always getting acquired as a group, give each ppc(4) device a mutex which it shares with all the child devices including ppbus(4), lpt(4), plip(4), etc. This mutex is then used for all the locking. - Rework the interrupt handling stuff yet again. Now ppbus drivers setup their interrupt handler during attach and tear it down during detach like most other drivers. ppbus(4) only invokes the interrupt handler of the device that currently owns the bus (if any) when an interrupt occurs, however. Also, interrupt handlers in general now accept their softc pointers as their argument rather than the device_t. Another feature of the ppbus interrupt handlers is that they are called with the parent ppc device's lock already held. This minimizes the number of lock operations during an interrupt. - Mark plip(4), lpt(4), pcfclock(4), ppi(4), vpo(4) MPSAFE. - lpbb(4) uses the ppc lock instead of Giant. - Other plip(4) changes: - Add a mutex to protect the global tables in plip(4) and free them on module unload. - Add a detach routine. - Split out the init/stop code from the ioctl routine into separate functions. - Other lpt(4) changes: - Use device_printf(). - Use a dedicated callout for the lptout timer. - Allocate the I/O buffers at attach and detach rather than during open and close as this simplifies the locking at the cost of 1024+32 bytes when the driver is attached. - Other ppi(4) changes: - Use an sx lock to serialize open and close. - Remove unused HADBUS flag. - Add a detach routine. - Use a malloc'd buffer for each read and write to avoid races with concurrent read/write. - Other pps(4) changes: - Use a callout rather than a callout handle with timeout(). - Conform to the new ppbus requirements (regular mutex, non-filter interrupt handler). pps(4) is probably going to have to become a standalone driver that doesn't use ppbus(4) to satisfy it's requirements for low latency as a result. - Use an sx lock to serialize open and close. - Other vpo(4) changes: - Use the parent ppc device's lock to create the CAM sim instead of Giant. - Other ppc(4) changes: - Fix ppc_isa's detach method to detach instead of calling attach. Tested by: no one :-( diff 187576 Wed Jan 21 21:14:29 MST 2009 jhb Add locking to ppc and ppbus and mark the whole lot MPSAFE: - To avoid having a bunch of locks that end up always getting acquired as a group, give each ppc(4) device a mutex which it shares with all the child devices including ppbus(4), lpt(4), plip(4), etc. This mutex is then used for all the locking. - Rework the interrupt handling stuff yet again. Now ppbus drivers setup their interrupt handler during attach and tear it down during detach like most other drivers. ppbus(4) only invokes the interrupt handler of the device that currently owns the bus (if any) when an interrupt occurs, however. Also, interrupt handlers in general now accept their softc pointers as their argument rather than the device_t. Another feature of the ppbus interrupt handlers is that they are called with the parent ppc device's lock already held. This minimizes the number of lock operations during an interrupt. - Mark plip(4), lpt(4), pcfclock(4), ppi(4), vpo(4) MPSAFE. - lpbb(4) uses the ppc lock instead of Giant. - Other plip(4) changes: - Add a mutex to protect the global tables in plip(4) and free them on module unload. - Add a detach routine. - Split out the init/stop code from the ioctl routine into separate functions. - Other lpt(4) changes: - Use device_printf(). - Use a dedicated callout for the lptout timer. - Allocate the I/O buffers at attach and detach rather than during open and close as this simplifies the locking at the cost of 1024+32 bytes when the driver is attached. - Other ppi(4) changes: - Use an sx lock to serialize open and close. - Remove unused HADBUS flag. - Add a detach routine. - Use a malloc'd buffer for each read and write to avoid races with concurrent read/write. - Other pps(4) changes: - Use a callout rather than a callout handle with timeout(). - Conform to the new ppbus requirements (regular mutex, non-filter interrupt handler). pps(4) is probably going to have to become a standalone driver that doesn't use ppbus(4) to satisfy it's requirements for low latency as a result. - Use an sx lock to serialize open and close. - Other vpo(4) changes: - Use the parent ppc device's lock to create the CAM sim instead of Giant. - Other ppc(4) changes: - Fix ppc_isa's detach method to detach instead of calling attach. Tested by: no one :-( diff 187576 Wed Jan 21 21:14:29 MST 2009 jhb Add locking to ppc and ppbus and mark the whole lot MPSAFE: - To avoid having a bunch of locks that end up always getting acquired as a group, give each ppc(4) device a mutex which it shares with all the child devices including ppbus(4), lpt(4), plip(4), etc. This mutex is then used for all the locking. - Rework the interrupt handling stuff yet again. Now ppbus drivers setup their interrupt handler during attach and tear it down during detach like most other drivers. ppbus(4) only invokes the interrupt handler of the device that currently owns the bus (if any) when an interrupt occurs, however. Also, interrupt handlers in general now accept their softc pointers as their argument rather than the device_t. Another feature of the ppbus interrupt handlers is that they are called with the parent ppc device's lock already held. This minimizes the number of lock operations during an interrupt. - Mark plip(4), lpt(4), pcfclock(4), ppi(4), vpo(4) MPSAFE. - lpbb(4) uses the ppc lock instead of Giant. - Other plip(4) changes: - Add a mutex to protect the global tables in plip(4) and free them on module unload. - Add a detach routine. - Split out the init/stop code from the ioctl routine into separate functions. - Other lpt(4) changes: - Use device_printf(). - Use a dedicated callout for the lptout timer. - Allocate the I/O buffers at attach and detach rather than during open and close as this simplifies the locking at the cost of 1024+32 bytes when the driver is attached. - Other ppi(4) changes: - Use an sx lock to serialize open and close. - Remove unused HADBUS flag. - Add a detach routine. - Use a malloc'd buffer for each read and write to avoid races with concurrent read/write. - Other pps(4) changes: - Use a callout rather than a callout handle with timeout(). - Conform to the new ppbus requirements (regular mutex, non-filter interrupt handler). pps(4) is probably going to have to become a standalone driver that doesn't use ppbus(4) to satisfy it's requirements for low latency as a result. - Use an sx lock to serialize open and close. - Other vpo(4) changes: - Use the parent ppc device's lock to create the CAM sim instead of Giant. - Other ppc(4) changes: - Fix ppc_isa's detach method to detach instead of calling attach. Tested by: no one :-( diff 187576 Wed Jan 21 21:14:29 MST 2009 jhb Add locking to ppc and ppbus and mark the whole lot MPSAFE: - To avoid having a bunch of locks that end up always getting acquired as a group, give each ppc(4) device a mutex which it shares with all the child devices including ppbus(4), lpt(4), plip(4), etc. This mutex is then used for all the locking. - Rework the interrupt handling stuff yet again. Now ppbus drivers setup their interrupt handler during attach and tear it down during detach like most other drivers. ppbus(4) only invokes the interrupt handler of the device that currently owns the bus (if any) when an interrupt occurs, however. Also, interrupt handlers in general now accept their softc pointers as their argument rather than the device_t. Another feature of the ppbus interrupt handlers is that they are called with the parent ppc device's lock already held. This minimizes the number of lock operations during an interrupt. - Mark plip(4), lpt(4), pcfclock(4), ppi(4), vpo(4) MPSAFE. - lpbb(4) uses the ppc lock instead of Giant. - Other plip(4) changes: - Add a mutex to protect the global tables in plip(4) and free them on module unload. - Add a detach routine. - Split out the init/stop code from the ioctl routine into separate functions. - Other lpt(4) changes: - Use device_printf(). - Use a dedicated callout for the lptout timer. - Allocate the I/O buffers at attach and detach rather than during open and close as this simplifies the locking at the cost of 1024+32 bytes when the driver is attached. - Other ppi(4) changes: - Use an sx lock to serialize open and close. - Remove unused HADBUS flag. - Add a detach routine. - Use a malloc'd buffer for each read and write to avoid races with concurrent read/write. - Other pps(4) changes: - Use a callout rather than a callout handle with timeout(). - Conform to the new ppbus requirements (regular mutex, non-filter interrupt handler). pps(4) is probably going to have to become a standalone driver that doesn't use ppbus(4) to satisfy it's requirements for low latency as a result. - Use an sx lock to serialize open and close. - Other vpo(4) changes: - Use the parent ppc device's lock to create the CAM sim instead of Giant. - Other ppc(4) changes: - Fix ppc_isa's detach method to detach instead of calling attach. Tested by: no one :-( diff 187576 Wed Jan 21 21:14:29 MST 2009 jhb Add locking to ppc and ppbus and mark the whole lot MPSAFE: - To avoid having a bunch of locks that end up always getting acquired as a group, give each ppc(4) device a mutex which it shares with all the child devices including ppbus(4), lpt(4), plip(4), etc. This mutex is then used for all the locking. - Rework the interrupt handling stuff yet again. Now ppbus drivers setup their interrupt handler during attach and tear it down during detach like most other drivers. ppbus(4) only invokes the interrupt handler of the device that currently owns the bus (if any) when an interrupt occurs, however. Also, interrupt handlers in general now accept their softc pointers as their argument rather than the device_t. Another feature of the ppbus interrupt handlers is that they are called with the parent ppc device's lock already held. This minimizes the number of lock operations during an interrupt. - Mark plip(4), lpt(4), pcfclock(4), ppi(4), vpo(4) MPSAFE. - lpbb(4) uses the ppc lock instead of Giant. - Other plip(4) changes: - Add a mutex to protect the global tables in plip(4) and free them on module unload. - Add a detach routine. - Split out the init/stop code from the ioctl routine into separate functions. - Other lpt(4) changes: - Use device_printf(). - Use a dedicated callout for the lptout timer. - Allocate the I/O buffers at attach and detach rather than during open and close as this simplifies the locking at the cost of 1024+32 bytes when the driver is attached. - Other ppi(4) changes: - Use an sx lock to serialize open and close. - Remove unused HADBUS flag. - Add a detach routine. - Use a malloc'd buffer for each read and write to avoid races with concurrent read/write. - Other pps(4) changes: - Use a callout rather than a callout handle with timeout(). - Conform to the new ppbus requirements (regular mutex, non-filter interrupt handler). pps(4) is probably going to have to become a standalone driver that doesn't use ppbus(4) to satisfy it's requirements for low latency as a result. - Use an sx lock to serialize open and close. - Other vpo(4) changes: - Use the parent ppc device's lock to create the CAM sim instead of Giant. - Other ppc(4) changes: - Fix ppc_isa's detach method to detach instead of calling attach. Tested by: no one :-( diff 187576 Wed Jan 21 21:14:29 MST 2009 jhb Add locking to ppc and ppbus and mark the whole lot MPSAFE: - To avoid having a bunch of locks that end up always getting acquired as a group, give each ppc(4) device a mutex which it shares with all the child devices including ppbus(4), lpt(4), plip(4), etc. This mutex is then used for all the locking. - Rework the interrupt handling stuff yet again. Now ppbus drivers setup their interrupt handler during attach and tear it down during detach like most other drivers. ppbus(4) only invokes the interrupt handler of the device that currently owns the bus (if any) when an interrupt occurs, however. Also, interrupt handlers in general now accept their softc pointers as their argument rather than the device_t. Another feature of the ppbus interrupt handlers is that they are called with the parent ppc device's lock already held. This minimizes the number of lock operations during an interrupt. - Mark plip(4), lpt(4), pcfclock(4), ppi(4), vpo(4) MPSAFE. - lpbb(4) uses the ppc lock instead of Giant. - Other plip(4) changes: - Add a mutex to protect the global tables in plip(4) and free them on module unload. - Add a detach routine. - Split out the init/stop code from the ioctl routine into separate functions. - Other lpt(4) changes: - Use device_printf(). - Use a dedicated callout for the lptout timer. - Allocate the I/O buffers at attach and detach rather than during open and close as this simplifies the locking at the cost of 1024+32 bytes when the driver is attached. - Other ppi(4) changes: - Use an sx lock to serialize open and close. - Remove unused HADBUS flag. - Add a detach routine. - Use a malloc'd buffer for each read and write to avoid races with concurrent read/write. - Other pps(4) changes: - Use a callout rather than a callout handle with timeout(). - Conform to the new ppbus requirements (regular mutex, non-filter interrupt handler). pps(4) is probably going to have to become a standalone driver that doesn't use ppbus(4) to satisfy it's requirements for low latency as a result. - Use an sx lock to serialize open and close. - Other vpo(4) changes: - Use the parent ppc device's lock to create the CAM sim instead of Giant. - Other ppc(4) changes: - Fix ppc_isa's detach method to detach instead of calling attach. Tested by: no one :-( diff 187576 Wed Jan 21 21:14:29 MST 2009 jhb Add locking to ppc and ppbus and mark the whole lot MPSAFE: - To avoid having a bunch of locks that end up always getting acquired as a group, give each ppc(4) device a mutex which it shares with all the child devices including ppbus(4), lpt(4), plip(4), etc. This mutex is then used for all the locking. - Rework the interrupt handling stuff yet again. Now ppbus drivers setup their interrupt handler during attach and tear it down during detach like most other drivers. ppbus(4) only invokes the interrupt handler of the device that currently owns the bus (if any) when an interrupt occurs, however. Also, interrupt handlers in general now accept their softc pointers as their argument rather than the device_t. Another feature of the ppbus interrupt handlers is that they are called with the parent ppc device's lock already held. This minimizes the number of lock operations during an interrupt. - Mark plip(4), lpt(4), pcfclock(4), ppi(4), vpo(4) MPSAFE. - lpbb(4) uses the ppc lock instead of Giant. - Other plip(4) changes: - Add a mutex to protect the global tables in plip(4) and free them on module unload. - Add a detach routine. - Split out the init/stop code from the ioctl routine into separate functions. - Other lpt(4) changes: - Use device_printf(). - Use a dedicated callout for the lptout timer. - Allocate the I/O buffers at attach and detach rather than during open and close as this simplifies the locking at the cost of 1024+32 bytes when the driver is attached. - Other ppi(4) changes: - Use an sx lock to serialize open and close. - Remove unused HADBUS flag. - Add a detach routine. - Use a malloc'd buffer for each read and write to avoid races with concurrent read/write. - Other pps(4) changes: - Use a callout rather than a callout handle with timeout(). - Conform to the new ppbus requirements (regular mutex, non-filter interrupt handler). pps(4) is probably going to have to become a standalone driver that doesn't use ppbus(4) to satisfy it's requirements for low latency as a result. - Use an sx lock to serialize open and close. - Other vpo(4) changes: - Use the parent ppc device's lock to create the CAM sim instead of Giant. - Other ppc(4) changes: - Fix ppc_isa's detach method to detach instead of calling attach. Tested by: no one :-( diff 187576 Wed Jan 21 21:14:29 MST 2009 jhb Add locking to ppc and ppbus and mark the whole lot MPSAFE: - To avoid having a bunch of locks that end up always getting acquired as a group, give each ppc(4) device a mutex which it shares with all the child devices including ppbus(4), lpt(4), plip(4), etc. This mutex is then used for all the locking. - Rework the interrupt handling stuff yet again. Now ppbus drivers setup their interrupt handler during attach and tear it down during detach like most other drivers. ppbus(4) only invokes the interrupt handler of the device that currently owns the bus (if any) when an interrupt occurs, however. Also, interrupt handlers in general now accept their softc pointers as their argument rather than the device_t. Another feature of the ppbus interrupt handlers is that they are called with the parent ppc device's lock already held. This minimizes the number of lock operations during an interrupt. - Mark plip(4), lpt(4), pcfclock(4), ppi(4), vpo(4) MPSAFE. - lpbb(4) uses the ppc lock instead of Giant. - Other plip(4) changes: - Add a mutex to protect the global tables in plip(4) and free them on module unload. - Add a detach routine. - Split out the init/stop code from the ioctl routine into separate functions. - Other lpt(4) changes: - Use device_printf(). - Use a dedicated callout for the lptout timer. - Allocate the I/O buffers at attach and detach rather than during open and close as this simplifies the locking at the cost of 1024+32 bytes when the driver is attached. - Other ppi(4) changes: - Use an sx lock to serialize open and close. - Remove unused HADBUS flag. - Add a detach routine. - Use a malloc'd buffer for each read and write to avoid races with concurrent read/write. - Other pps(4) changes: - Use a callout rather than a callout handle with timeout(). - Conform to the new ppbus requirements (regular mutex, non-filter interrupt handler). pps(4) is probably going to have to become a standalone driver that doesn't use ppbus(4) to satisfy it's requirements for low latency as a result. - Use an sx lock to serialize open and close. - Other vpo(4) changes: - Use the parent ppc device's lock to create the CAM sim instead of Giant. - Other ppc(4) changes: - Fix ppc_isa's detach method to detach instead of calling attach. Tested by: no one :-( diff 187576 Wed Jan 21 21:14:29 MST 2009 jhb Add locking to ppc and ppbus and mark the whole lot MPSAFE: - To avoid having a bunch of locks that end up always getting acquired as a group, give each ppc(4) device a mutex which it shares with all the child devices including ppbus(4), lpt(4), plip(4), etc. This mutex is then used for all the locking. - Rework the interrupt handling stuff yet again. Now ppbus drivers setup their interrupt handler during attach and tear it down during detach like most other drivers. ppbus(4) only invokes the interrupt handler of the device that currently owns the bus (if any) when an interrupt occurs, however. Also, interrupt handlers in general now accept their softc pointers as their argument rather than the device_t. Another feature of the ppbus interrupt handlers is that they are called with the parent ppc device's lock already held. This minimizes the number of lock operations during an interrupt. - Mark plip(4), lpt(4), pcfclock(4), ppi(4), vpo(4) MPSAFE. - lpbb(4) uses the ppc lock instead of Giant. - Other plip(4) changes: - Add a mutex to protect the global tables in plip(4) and free them on module unload. - Add a detach routine. - Split out the init/stop code from the ioctl routine into separate functions. - Other lpt(4) changes: - Use device_printf(). - Use a dedicated callout for the lptout timer. - Allocate the I/O buffers at attach and detach rather than during open and close as this simplifies the locking at the cost of 1024+32 bytes when the driver is attached. - Other ppi(4) changes: - Use an sx lock to serialize open and close. - Remove unused HADBUS flag. - Add a detach routine. - Use a malloc'd buffer for each read and write to avoid races with concurrent read/write. - Other pps(4) changes: - Use a callout rather than a callout handle with timeout(). - Conform to the new ppbus requirements (regular mutex, non-filter interrupt handler). pps(4) is probably going to have to become a standalone driver that doesn't use ppbus(4) to satisfy it's requirements for low latency as a result. - Use an sx lock to serialize open and close. - Other vpo(4) changes: - Use the parent ppc device's lock to create the CAM sim instead of Giant. - Other ppc(4) changes: - Fix ppc_isa's detach method to detach instead of calling attach. Tested by: no one :-( diff 187576 Wed Jan 21 21:14:29 MST 2009 jhb Add locking to ppc and ppbus and mark the whole lot MPSAFE: - To avoid having a bunch of locks that end up always getting acquired as a group, give each ppc(4) device a mutex which it shares with all the child devices including ppbus(4), lpt(4), plip(4), etc. This mutex is then used for all the locking. - Rework the interrupt handling stuff yet again. Now ppbus drivers setup their interrupt handler during attach and tear it down during detach like most other drivers. ppbus(4) only invokes the interrupt handler of the device that currently owns the bus (if any) when an interrupt occurs, however. Also, interrupt handlers in general now accept their softc pointers as their argument rather than the device_t. Another feature of the ppbus interrupt handlers is that they are called with the parent ppc device's lock already held. This minimizes the number of lock operations during an interrupt. - Mark plip(4), lpt(4), pcfclock(4), ppi(4), vpo(4) MPSAFE. - lpbb(4) uses the ppc lock instead of Giant. - Other plip(4) changes: - Add a mutex to protect the global tables in plip(4) and free them on module unload. - Add a detach routine. - Split out the init/stop code from the ioctl routine into separate functions. - Other lpt(4) changes: - Use device_printf(). - Use a dedicated callout for the lptout timer. - Allocate the I/O buffers at attach and detach rather than during open and close as this simplifies the locking at the cost of 1024+32 bytes when the driver is attached. - Other ppi(4) changes: - Use an sx lock to serialize open and close. - Remove unused HADBUS flag. - Add a detach routine. - Use a malloc'd buffer for each read and write to avoid races with concurrent read/write. - Other pps(4) changes: - Use a callout rather than a callout handle with timeout(). - Conform to the new ppbus requirements (regular mutex, non-filter interrupt handler). pps(4) is probably going to have to become a standalone driver that doesn't use ppbus(4) to satisfy it's requirements for low latency as a result. - Use an sx lock to serialize open and close. - Other vpo(4) changes: - Use the parent ppc device's lock to create the CAM sim instead of Giant. - Other ppc(4) changes: - Fix ppc_isa's detach method to detach instead of calling attach. Tested by: no one :-( diff 187576 Wed Jan 21 21:14:29 MST 2009 jhb Add locking to ppc and ppbus and mark the whole lot MPSAFE: - To avoid having a bunch of locks that end up always getting acquired as a group, give each ppc(4) device a mutex which it shares with all the child devices including ppbus(4), lpt(4), plip(4), etc. This mutex is then used for all the locking. - Rework the interrupt handling stuff yet again. Now ppbus drivers setup their interrupt handler during attach and tear it down during detach like most other drivers. ppbus(4) only invokes the interrupt handler of the device that currently owns the bus (if any) when an interrupt occurs, however. Also, interrupt handlers in general now accept their softc pointers as their argument rather than the device_t. Another feature of the ppbus interrupt handlers is that they are called with the parent ppc device's lock already held. This minimizes the number of lock operations during an interrupt. - Mark plip(4), lpt(4), pcfclock(4), ppi(4), vpo(4) MPSAFE. - lpbb(4) uses the ppc lock instead of Giant. - Other plip(4) changes: - Add a mutex to protect the global tables in plip(4) and free them on module unload. - Add a detach routine. - Split out the init/stop code from the ioctl routine into separate functions. - Other lpt(4) changes: - Use device_printf(). - Use a dedicated callout for the lptout timer. - Allocate the I/O buffers at attach and detach rather than during open and close as this simplifies the locking at the cost of 1024+32 bytes when the driver is attached. - Other ppi(4) changes: - Use an sx lock to serialize open and close. - Remove unused HADBUS flag. - Add a detach routine. - Use a malloc'd buffer for each read and write to avoid races with concurrent read/write. - Other pps(4) changes: - Use a callout rather than a callout handle with timeout(). - Conform to the new ppbus requirements (regular mutex, non-filter interrupt handler). pps(4) is probably going to have to become a standalone driver that doesn't use ppbus(4) to satisfy it's requirements for low latency as a result. - Use an sx lock to serialize open and close. - Other vpo(4) changes: - Use the parent ppc device's lock to create the CAM sim instead of Giant. - Other ppc(4) changes: - Fix ppc_isa's detach method to detach instead of calling attach. Tested by: no one :-( |
/freebsd-9.3-release/sys/dev/atkbdc/ | ||
H A D | atkbdc_ebus.c | 147271 Fri Jun 10 18:56:38 MDT 2005 marius - Hook up the new locations of the atkbdc(4), atkbd(4) and psm(4) source files after they were repo-copied to sys/dev/atkbdc. The sources of atkbdc(4) and its children were moved to the new location in preparation for adding an EBus front-end to atkbdc(4) for use on sparc64; i.e. in order to not further scatter them over the whole tree which would have been the result of adding atkbdc_ebus.c in e.g. sys/sparc64/ebus. Another reason for the repo-copies was that some of the sources were misfiled, e.g. sys/isa/atkbd_isa.c wasn't ISA-specific at all but for hanging atkbd(4) off of atkbdc(4) and was renamed to atkbd_atkbdc.c accordingly. Most of sys/isa/psm.c, i.e. expect for its PSMC PNP part, also isn't ISA-specific. - Separate the parts of atkbdc_isa.c which aren't actually ISA-specific but are shareable between different atkbdc(4) bus front-ends into atkbdc_subr.c (repo-copied from atkbdc_isa.c). While here use bus_generic_rl_alloc_resource() and bus_generic_rl_release_resource() respectively in atkbdc_isa.c instead of rolling own versions. - Add sparc64 MD bits to atkbdc(4) and atkbd(4) and an EBus front-end for atkbdc(4). PS/2 controllers and input devices are used on a couple of Sun OEM boards and occur on either the EBus or the ISA bus. Depending on the board it's either the only on-board mean to connect a keyboard and mouse or an alternative to either RS232 or USB devices. - Wrap the PSMC PNP part of psm.c in #ifdef DEV_ISA so it can be compiled without isa(4) (e.g. for EBus-only machines). This ISA-specific part isn't separated into its own source file, yet, as it requires more work than was feasible for 6.0 in order to do it in a clean way. Actually philip@ is working on a rewrite of psm(4) so a more comprehensive clean-up and separation of hardware dependent and independent parts is expected to happen after 6.0. Tested on: i386, sparc64 (AX1105, AXe and AXi boards) Reviewed by: philip 147271 Fri Jun 10 18:56:38 MDT 2005 marius - Hook up the new locations of the atkbdc(4), atkbd(4) and psm(4) source files after they were repo-copied to sys/dev/atkbdc. The sources of atkbdc(4) and its children were moved to the new location in preparation for adding an EBus front-end to atkbdc(4) for use on sparc64; i.e. in order to not further scatter them over the whole tree which would have been the result of adding atkbdc_ebus.c in e.g. sys/sparc64/ebus. Another reason for the repo-copies was that some of the sources were misfiled, e.g. sys/isa/atkbd_isa.c wasn't ISA-specific at all but for hanging atkbd(4) off of atkbdc(4) and was renamed to atkbd_atkbdc.c accordingly. Most of sys/isa/psm.c, i.e. expect for its PSMC PNP part, also isn't ISA-specific. - Separate the parts of atkbdc_isa.c which aren't actually ISA-specific but are shareable between different atkbdc(4) bus front-ends into atkbdc_subr.c (repo-copied from atkbdc_isa.c). While here use bus_generic_rl_alloc_resource() and bus_generic_rl_release_resource() respectively in atkbdc_isa.c instead of rolling own versions. - Add sparc64 MD bits to atkbdc(4) and atkbd(4) and an EBus front-end for atkbdc(4). PS/2 controllers and input devices are used on a couple of Sun OEM boards and occur on either the EBus or the ISA bus. Depending on the board it's either the only on-board mean to connect a keyboard and mouse or an alternative to either RS232 or USB devices. - Wrap the PSMC PNP part of psm.c in #ifdef DEV_ISA so it can be compiled without isa(4) (e.g. for EBus-only machines). This ISA-specific part isn't separated into its own source file, yet, as it requires more work than was feasible for 6.0 in order to do it in a clean way. Actually philip@ is working on a rewrite of psm(4) so a more comprehensive clean-up and separation of hardware dependent and independent parts is expected to happen after 6.0. Tested on: i386, sparc64 (AX1105, AXe and AXi boards) Reviewed by: philip 147271 Fri Jun 10 18:56:38 MDT 2005 marius - Hook up the new locations of the atkbdc(4), atkbd(4) and psm(4) source files after they were repo-copied to sys/dev/atkbdc. The sources of atkbdc(4) and its children were moved to the new location in preparation for adding an EBus front-end to atkbdc(4) for use on sparc64; i.e. in order to not further scatter them over the whole tree which would have been the result of adding atkbdc_ebus.c in e.g. sys/sparc64/ebus. Another reason for the repo-copies was that some of the sources were misfiled, e.g. sys/isa/atkbd_isa.c wasn't ISA-specific at all but for hanging atkbd(4) off of atkbdc(4) and was renamed to atkbd_atkbdc.c accordingly. Most of sys/isa/psm.c, i.e. expect for its PSMC PNP part, also isn't ISA-specific. - Separate the parts of atkbdc_isa.c which aren't actually ISA-specific but are shareable between different atkbdc(4) bus front-ends into atkbdc_subr.c (repo-copied from atkbdc_isa.c). While here use bus_generic_rl_alloc_resource() and bus_generic_rl_release_resource() respectively in atkbdc_isa.c instead of rolling own versions. - Add sparc64 MD bits to atkbdc(4) and atkbd(4) and an EBus front-end for atkbdc(4). PS/2 controllers and input devices are used on a couple of Sun OEM boards and occur on either the EBus or the ISA bus. Depending on the board it's either the only on-board mean to connect a keyboard and mouse or an alternative to either RS232 or USB devices. - Wrap the PSMC PNP part of psm.c in #ifdef DEV_ISA so it can be compiled without isa(4) (e.g. for EBus-only machines). This ISA-specific part isn't separated into its own source file, yet, as it requires more work than was feasible for 6.0 in order to do it in a clean way. Actually philip@ is working on a rewrite of psm(4) so a more comprehensive clean-up and separation of hardware dependent and independent parts is expected to happen after 6.0. Tested on: i386, sparc64 (AX1105, AXe and AXi boards) Reviewed by: philip 147271 Fri Jun 10 18:56:38 MDT 2005 marius - Hook up the new locations of the atkbdc(4), atkbd(4) and psm(4) source files after they were repo-copied to sys/dev/atkbdc. The sources of atkbdc(4) and its children were moved to the new location in preparation for adding an EBus front-end to atkbdc(4) for use on sparc64; i.e. in order to not further scatter them over the whole tree which would have been the result of adding atkbdc_ebus.c in e.g. sys/sparc64/ebus. Another reason for the repo-copies was that some of the sources were misfiled, e.g. sys/isa/atkbd_isa.c wasn't ISA-specific at all but for hanging atkbd(4) off of atkbdc(4) and was renamed to atkbd_atkbdc.c accordingly. Most of sys/isa/psm.c, i.e. expect for its PSMC PNP part, also isn't ISA-specific. - Separate the parts of atkbdc_isa.c which aren't actually ISA-specific but are shareable between different atkbdc(4) bus front-ends into atkbdc_subr.c (repo-copied from atkbdc_isa.c). While here use bus_generic_rl_alloc_resource() and bus_generic_rl_release_resource() respectively in atkbdc_isa.c instead of rolling own versions. - Add sparc64 MD bits to atkbdc(4) and atkbd(4) and an EBus front-end for atkbdc(4). PS/2 controllers and input devices are used on a couple of Sun OEM boards and occur on either the EBus or the ISA bus. Depending on the board it's either the only on-board mean to connect a keyboard and mouse or an alternative to either RS232 or USB devices. - Wrap the PSMC PNP part of psm.c in #ifdef DEV_ISA so it can be compiled without isa(4) (e.g. for EBus-only machines). This ISA-specific part isn't separated into its own source file, yet, as it requires more work than was feasible for 6.0 in order to do it in a clean way. Actually philip@ is working on a rewrite of psm(4) so a more comprehensive clean-up and separation of hardware dependent and independent parts is expected to happen after 6.0. Tested on: i386, sparc64 (AX1105, AXe and AXi boards) Reviewed by: philip 147271 Fri Jun 10 18:56:38 MDT 2005 marius - Hook up the new locations of the atkbdc(4), atkbd(4) and psm(4) source files after they were repo-copied to sys/dev/atkbdc. The sources of atkbdc(4) and its children were moved to the new location in preparation for adding an EBus front-end to atkbdc(4) for use on sparc64; i.e. in order to not further scatter them over the whole tree which would have been the result of adding atkbdc_ebus.c in e.g. sys/sparc64/ebus. Another reason for the repo-copies was that some of the sources were misfiled, e.g. sys/isa/atkbd_isa.c wasn't ISA-specific at all but for hanging atkbd(4) off of atkbdc(4) and was renamed to atkbd_atkbdc.c accordingly. Most of sys/isa/psm.c, i.e. expect for its PSMC PNP part, also isn't ISA-specific. - Separate the parts of atkbdc_isa.c which aren't actually ISA-specific but are shareable between different atkbdc(4) bus front-ends into atkbdc_subr.c (repo-copied from atkbdc_isa.c). While here use bus_generic_rl_alloc_resource() and bus_generic_rl_release_resource() respectively in atkbdc_isa.c instead of rolling own versions. - Add sparc64 MD bits to atkbdc(4) and atkbd(4) and an EBus front-end for atkbdc(4). PS/2 controllers and input devices are used on a couple of Sun OEM boards and occur on either the EBus or the ISA bus. Depending on the board it's either the only on-board mean to connect a keyboard and mouse or an alternative to either RS232 or USB devices. - Wrap the PSMC PNP part of psm.c in #ifdef DEV_ISA so it can be compiled without isa(4) (e.g. for EBus-only machines). This ISA-specific part isn't separated into its own source file, yet, as it requires more work than was feasible for 6.0 in order to do it in a clean way. Actually philip@ is working on a rewrite of psm(4) so a more comprehensive clean-up and separation of hardware dependent and independent parts is expected to happen after 6.0. Tested on: i386, sparc64 (AX1105, AXe and AXi boards) Reviewed by: philip 147271 Fri Jun 10 18:56:38 MDT 2005 marius - Hook up the new locations of the atkbdc(4), atkbd(4) and psm(4) source files after they were repo-copied to sys/dev/atkbdc. The sources of atkbdc(4) and its children were moved to the new location in preparation for adding an EBus front-end to atkbdc(4) for use on sparc64; i.e. in order to not further scatter them over the whole tree which would have been the result of adding atkbdc_ebus.c in e.g. sys/sparc64/ebus. Another reason for the repo-copies was that some of the sources were misfiled, e.g. sys/isa/atkbd_isa.c wasn't ISA-specific at all but for hanging atkbd(4) off of atkbdc(4) and was renamed to atkbd_atkbdc.c accordingly. Most of sys/isa/psm.c, i.e. expect for its PSMC PNP part, also isn't ISA-specific. - Separate the parts of atkbdc_isa.c which aren't actually ISA-specific but are shareable between different atkbdc(4) bus front-ends into atkbdc_subr.c (repo-copied from atkbdc_isa.c). While here use bus_generic_rl_alloc_resource() and bus_generic_rl_release_resource() respectively in atkbdc_isa.c instead of rolling own versions. - Add sparc64 MD bits to atkbdc(4) and atkbd(4) and an EBus front-end for atkbdc(4). PS/2 controllers and input devices are used on a couple of Sun OEM boards and occur on either the EBus or the ISA bus. Depending on the board it's either the only on-board mean to connect a keyboard and mouse or an alternative to either RS232 or USB devices. - Wrap the PSMC PNP part of psm.c in #ifdef DEV_ISA so it can be compiled without isa(4) (e.g. for EBus-only machines). This ISA-specific part isn't separated into its own source file, yet, as it requires more work than was feasible for 6.0 in order to do it in a clean way. Actually philip@ is working on a rewrite of psm(4) so a more comprehensive clean-up and separation of hardware dependent and independent parts is expected to happen after 6.0. Tested on: i386, sparc64 (AX1105, AXe and AXi boards) Reviewed by: philip 147271 Fri Jun 10 18:56:38 MDT 2005 marius - Hook up the new locations of the atkbdc(4), atkbd(4) and psm(4) source files after they were repo-copied to sys/dev/atkbdc. The sources of atkbdc(4) and its children were moved to the new location in preparation for adding an EBus front-end to atkbdc(4) for use on sparc64; i.e. in order to not further scatter them over the whole tree which would have been the result of adding atkbdc_ebus.c in e.g. sys/sparc64/ebus. Another reason for the repo-copies was that some of the sources were misfiled, e.g. sys/isa/atkbd_isa.c wasn't ISA-specific at all but for hanging atkbd(4) off of atkbdc(4) and was renamed to atkbd_atkbdc.c accordingly. Most of sys/isa/psm.c, i.e. expect for its PSMC PNP part, also isn't ISA-specific. - Separate the parts of atkbdc_isa.c which aren't actually ISA-specific but are shareable between different atkbdc(4) bus front-ends into atkbdc_subr.c (repo-copied from atkbdc_isa.c). While here use bus_generic_rl_alloc_resource() and bus_generic_rl_release_resource() respectively in atkbdc_isa.c instead of rolling own versions. - Add sparc64 MD bits to atkbdc(4) and atkbd(4) and an EBus front-end for atkbdc(4). PS/2 controllers and input devices are used on a couple of Sun OEM boards and occur on either the EBus or the ISA bus. Depending on the board it's either the only on-board mean to connect a keyboard and mouse or an alternative to either RS232 or USB devices. - Wrap the PSMC PNP part of psm.c in #ifdef DEV_ISA so it can be compiled without isa(4) (e.g. for EBus-only machines). This ISA-specific part isn't separated into its own source file, yet, as it requires more work than was feasible for 6.0 in order to do it in a clean way. Actually philip@ is working on a rewrite of psm(4) so a more comprehensive clean-up and separation of hardware dependent and independent parts is expected to happen after 6.0. Tested on: i386, sparc64 (AX1105, AXe and AXi boards) Reviewed by: philip 147271 Fri Jun 10 18:56:38 MDT 2005 marius - Hook up the new locations of the atkbdc(4), atkbd(4) and psm(4) source files after they were repo-copied to sys/dev/atkbdc. The sources of atkbdc(4) and its children were moved to the new location in preparation for adding an EBus front-end to atkbdc(4) for use on sparc64; i.e. in order to not further scatter them over the whole tree which would have been the result of adding atkbdc_ebus.c in e.g. sys/sparc64/ebus. Another reason for the repo-copies was that some of the sources were misfiled, e.g. sys/isa/atkbd_isa.c wasn't ISA-specific at all but for hanging atkbd(4) off of atkbdc(4) and was renamed to atkbd_atkbdc.c accordingly. Most of sys/isa/psm.c, i.e. expect for its PSMC PNP part, also isn't ISA-specific. - Separate the parts of atkbdc_isa.c which aren't actually ISA-specific but are shareable between different atkbdc(4) bus front-ends into atkbdc_subr.c (repo-copied from atkbdc_isa.c). While here use bus_generic_rl_alloc_resource() and bus_generic_rl_release_resource() respectively in atkbdc_isa.c instead of rolling own versions. - Add sparc64 MD bits to atkbdc(4) and atkbd(4) and an EBus front-end for atkbdc(4). PS/2 controllers and input devices are used on a couple of Sun OEM boards and occur on either the EBus or the ISA bus. Depending on the board it's either the only on-board mean to connect a keyboard and mouse or an alternative to either RS232 or USB devices. - Wrap the PSMC PNP part of psm.c in #ifdef DEV_ISA so it can be compiled without isa(4) (e.g. for EBus-only machines). This ISA-specific part isn't separated into its own source file, yet, as it requires more work than was feasible for 6.0 in order to do it in a clean way. Actually philip@ is working on a rewrite of psm(4) so a more comprehensive clean-up and separation of hardware dependent and independent parts is expected to happen after 6.0. Tested on: i386, sparc64 (AX1105, AXe and AXi boards) Reviewed by: philip 147271 Fri Jun 10 18:56:38 MDT 2005 marius - Hook up the new locations of the atkbdc(4), atkbd(4) and psm(4) source files after they were repo-copied to sys/dev/atkbdc. The sources of atkbdc(4) and its children were moved to the new location in preparation for adding an EBus front-end to atkbdc(4) for use on sparc64; i.e. in order to not further scatter them over the whole tree which would have been the result of adding atkbdc_ebus.c in e.g. sys/sparc64/ebus. Another reason for the repo-copies was that some of the sources were misfiled, e.g. sys/isa/atkbd_isa.c wasn't ISA-specific at all but for hanging atkbd(4) off of atkbdc(4) and was renamed to atkbd_atkbdc.c accordingly. Most of sys/isa/psm.c, i.e. expect for its PSMC PNP part, also isn't ISA-specific. - Separate the parts of atkbdc_isa.c which aren't actually ISA-specific but are shareable between different atkbdc(4) bus front-ends into atkbdc_subr.c (repo-copied from atkbdc_isa.c). While here use bus_generic_rl_alloc_resource() and bus_generic_rl_release_resource() respectively in atkbdc_isa.c instead of rolling own versions. - Add sparc64 MD bits to atkbdc(4) and atkbd(4) and an EBus front-end for atkbdc(4). PS/2 controllers and input devices are used on a couple of Sun OEM boards and occur on either the EBus or the ISA bus. Depending on the board it's either the only on-board mean to connect a keyboard and mouse or an alternative to either RS232 or USB devices. - Wrap the PSMC PNP part of psm.c in #ifdef DEV_ISA so it can be compiled without isa(4) (e.g. for EBus-only machines). This ISA-specific part isn't separated into its own source file, yet, as it requires more work than was feasible for 6.0 in order to do it in a clean way. Actually philip@ is working on a rewrite of psm(4) so a more comprehensive clean-up and separation of hardware dependent and independent parts is expected to happen after 6.0. Tested on: i386, sparc64 (AX1105, AXe and AXi boards) Reviewed by: philip 147271 Fri Jun 10 18:56:38 MDT 2005 marius - Hook up the new locations of the atkbdc(4), atkbd(4) and psm(4) source files after they were repo-copied to sys/dev/atkbdc. The sources of atkbdc(4) and its children were moved to the new location in preparation for adding an EBus front-end to atkbdc(4) for use on sparc64; i.e. in order to not further scatter them over the whole tree which would have been the result of adding atkbdc_ebus.c in e.g. sys/sparc64/ebus. Another reason for the repo-copies was that some of the sources were misfiled, e.g. sys/isa/atkbd_isa.c wasn't ISA-specific at all but for hanging atkbd(4) off of atkbdc(4) and was renamed to atkbd_atkbdc.c accordingly. Most of sys/isa/psm.c, i.e. expect for its PSMC PNP part, also isn't ISA-specific. - Separate the parts of atkbdc_isa.c which aren't actually ISA-specific but are shareable between different atkbdc(4) bus front-ends into atkbdc_subr.c (repo-copied from atkbdc_isa.c). While here use bus_generic_rl_alloc_resource() and bus_generic_rl_release_resource() respectively in atkbdc_isa.c instead of rolling own versions. - Add sparc64 MD bits to atkbdc(4) and atkbd(4) and an EBus front-end for atkbdc(4). PS/2 controllers and input devices are used on a couple of Sun OEM boards and occur on either the EBus or the ISA bus. Depending on the board it's either the only on-board mean to connect a keyboard and mouse or an alternative to either RS232 or USB devices. - Wrap the PSMC PNP part of psm.c in #ifdef DEV_ISA so it can be compiled without isa(4) (e.g. for EBus-only machines). This ISA-specific part isn't separated into its own source file, yet, as it requires more work than was feasible for 6.0 in order to do it in a clean way. Actually philip@ is working on a rewrite of psm(4) so a more comprehensive clean-up and separation of hardware dependent and independent parts is expected to happen after 6.0. Tested on: i386, sparc64 (AX1105, AXe and AXi boards) Reviewed by: philip 147271 Fri Jun 10 18:56:38 MDT 2005 marius - Hook up the new locations of the atkbdc(4), atkbd(4) and psm(4) source files after they were repo-copied to sys/dev/atkbdc. The sources of atkbdc(4) and its children were moved to the new location in preparation for adding an EBus front-end to atkbdc(4) for use on sparc64; i.e. in order to not further scatter them over the whole tree which would have been the result of adding atkbdc_ebus.c in e.g. sys/sparc64/ebus. Another reason for the repo-copies was that some of the sources were misfiled, e.g. sys/isa/atkbd_isa.c wasn't ISA-specific at all but for hanging atkbd(4) off of atkbdc(4) and was renamed to atkbd_atkbdc.c accordingly. Most of sys/isa/psm.c, i.e. expect for its PSMC PNP part, also isn't ISA-specific. - Separate the parts of atkbdc_isa.c which aren't actually ISA-specific but are shareable between different atkbdc(4) bus front-ends into atkbdc_subr.c (repo-copied from atkbdc_isa.c). While here use bus_generic_rl_alloc_resource() and bus_generic_rl_release_resource() respectively in atkbdc_isa.c instead of rolling own versions. - Add sparc64 MD bits to atkbdc(4) and atkbd(4) and an EBus front-end for atkbdc(4). PS/2 controllers and input devices are used on a couple of Sun OEM boards and occur on either the EBus or the ISA bus. Depending on the board it's either the only on-board mean to connect a keyboard and mouse or an alternative to either RS232 or USB devices. - Wrap the PSMC PNP part of psm.c in #ifdef DEV_ISA so it can be compiled without isa(4) (e.g. for EBus-only machines). This ISA-specific part isn't separated into its own source file, yet, as it requires more work than was feasible for 6.0 in order to do it in a clean way. Actually philip@ is working on a rewrite of psm(4) so a more comprehensive clean-up and separation of hardware dependent and independent parts is expected to happen after 6.0. Tested on: i386, sparc64 (AX1105, AXe and AXi boards) Reviewed by: philip 147271 Fri Jun 10 18:56:38 MDT 2005 marius - Hook up the new locations of the atkbdc(4), atkbd(4) and psm(4) source files after they were repo-copied to sys/dev/atkbdc. The sources of atkbdc(4) and its children were moved to the new location in preparation for adding an EBus front-end to atkbdc(4) for use on sparc64; i.e. in order to not further scatter them over the whole tree which would have been the result of adding atkbdc_ebus.c in e.g. sys/sparc64/ebus. Another reason for the repo-copies was that some of the sources were misfiled, e.g. sys/isa/atkbd_isa.c wasn't ISA-specific at all but for hanging atkbd(4) off of atkbdc(4) and was renamed to atkbd_atkbdc.c accordingly. Most of sys/isa/psm.c, i.e. expect for its PSMC PNP part, also isn't ISA-specific. - Separate the parts of atkbdc_isa.c which aren't actually ISA-specific but are shareable between different atkbdc(4) bus front-ends into atkbdc_subr.c (repo-copied from atkbdc_isa.c). While here use bus_generic_rl_alloc_resource() and bus_generic_rl_release_resource() respectively in atkbdc_isa.c instead of rolling own versions. - Add sparc64 MD bits to atkbdc(4) and atkbd(4) and an EBus front-end for atkbdc(4). PS/2 controllers and input devices are used on a couple of Sun OEM boards and occur on either the EBus or the ISA bus. Depending on the board it's either the only on-board mean to connect a keyboard and mouse or an alternative to either RS232 or USB devices. - Wrap the PSMC PNP part of psm.c in #ifdef DEV_ISA so it can be compiled without isa(4) (e.g. for EBus-only machines). This ISA-specific part isn't separated into its own source file, yet, as it requires more work than was feasible for 6.0 in order to do it in a clean way. Actually philip@ is working on a rewrite of psm(4) so a more comprehensive clean-up and separation of hardware dependent and independent parts is expected to happen after 6.0. Tested on: i386, sparc64 (AX1105, AXe and AXi boards) Reviewed by: philip 147271 Fri Jun 10 18:56:38 MDT 2005 marius - Hook up the new locations of the atkbdc(4), atkbd(4) and psm(4) source files after they were repo-copied to sys/dev/atkbdc. The sources of atkbdc(4) and its children were moved to the new location in preparation for adding an EBus front-end to atkbdc(4) for use on sparc64; i.e. in order to not further scatter them over the whole tree which would have been the result of adding atkbdc_ebus.c in e.g. sys/sparc64/ebus. Another reason for the repo-copies was that some of the sources were misfiled, e.g. sys/isa/atkbd_isa.c wasn't ISA-specific at all but for hanging atkbd(4) off of atkbdc(4) and was renamed to atkbd_atkbdc.c accordingly. Most of sys/isa/psm.c, i.e. expect for its PSMC PNP part, also isn't ISA-specific. - Separate the parts of atkbdc_isa.c which aren't actually ISA-specific but are shareable between different atkbdc(4) bus front-ends into atkbdc_subr.c (repo-copied from atkbdc_isa.c). While here use bus_generic_rl_alloc_resource() and bus_generic_rl_release_resource() respectively in atkbdc_isa.c instead of rolling own versions. - Add sparc64 MD bits to atkbdc(4) and atkbd(4) and an EBus front-end for atkbdc(4). PS/2 controllers and input devices are used on a couple of Sun OEM boards and occur on either the EBus or the ISA bus. Depending on the board it's either the only on-board mean to connect a keyboard and mouse or an alternative to either RS232 or USB devices. - Wrap the PSMC PNP part of psm.c in #ifdef DEV_ISA so it can be compiled without isa(4) (e.g. for EBus-only machines). This ISA-specific part isn't separated into its own source file, yet, as it requires more work than was feasible for 6.0 in order to do it in a clean way. Actually philip@ is working on a rewrite of psm(4) so a more comprehensive clean-up and separation of hardware dependent and independent parts is expected to happen after 6.0. Tested on: i386, sparc64 (AX1105, AXe and AXi boards) Reviewed by: philip |
/freebsd-9.3-release/sys/sparc64/central/ | ||
H A D | central.c | diff 230687 Sat Jan 28 22:07:28 MST 2012 marius MFC: r225931, r225932, r227000 Make sparc64 compatible with NEW_PCIB and enable it: - Implement bus_adjust_resource() methods as far as necessary and in non-PCI bridge drivers as far as feasible without rototilling them. - As NEW_PCIB does a layering violation by activating resources at layers above pci(4) without previously bubbling up their allocation there, move the assignment of bus tags and handles from the bus_alloc_resource() to the bus_activate_resource() methods like at least the other NEW_PCIB enabled architectures do. This is somewhat unfortunate as previously sparc64 (ab)used resource activation to indicate whether SYS_RES_MEMORY resources should be mapped into KVA, which is only necessary if their going to be accessed via the pointer returned from rman_get_virtual() but not for bus_space(9) as the later always uses physical access on sparc64. Besides wasting KVA if we always map in SYS_RES_MEMORY resources, a driver also may deliberately not map them in if the firmware already has done so, possibly in a special way. So in order to still allow a driver to decide whether a SYS_RES_MEMORY resource should be mapped into KVA we let it indicate that by calling bus_space_map(9) with BUS_SPACE_MAP_LINEAR as actually documented in the bus_space(9) page. This is implemented by allocating a separate bus tag per SYS_RES_MEMORY resource and passing the resource via the previously unused bus tag cookie so we later on can call rman_set_virtual() in sparc64_bus_mem_map(). As a side effect this now also allows to actually indicate that a SYS_RES_MEMORY resource should be mapped in as cacheable and/or read-only via BUS_SPACE_MAP_CACHEABLE and BUS_SPACE_MAP_READONLY respectively. - Do some minor cleanup like taking advantage of rman_init_from_resource(), factor out the common part of bus tag allocation into a newly added sparc64_alloc_bus_tag(), hook up some missing newbus methods and replace some homegrown versions with the generic counterparts etc. - While at it, let apb_attach() (which can't use the generic NEW_PCIB code as APB bridges just don't have the base and limit registers implemented) regarding the config space registers cached in pcib_softc and the SYSCTL reporting nodes set up. diff 167308 Wed Mar 07 19:13:51 MST 2007 marius Rototill the sparc64 nexus(4) (actually this brings in the code the sun4v nexus(4) in turn is based on): o Change nexus(4) to manage the resources of its children so the respective device drivers don't need to figure them out of OFW themselves. o Change nexus(4) to provide the ofw_bus KOBJ interface instead of using IVARs for supplying the OFW node and the subset of standard properties of its children. Together with the previous change this also allows to fully take advantage of newbus in that drivers like fhc(4), which attach on multiple parent busses, no longer require different bus front-ends as obtaining the OFW node and properties as well as resource allocation works the same for all supported busses. As such this change also is part 4/4 of allowing creator(4) to work in USIII-based machines as it allows this driver to attach on both nexus(4) and upa(4). On the other hand removing these IVARs breaks API compatibility with the powerpc nexus(4) but which isn't that bad as a) sparc64 currently doesn't share any device driver hanging off of nexus(4) with powerpc and b) they were no longer compatible regarding OFW-related extensions at the pci(4) level since quite some time. o Provide bus_get_dma_tag methods in nexus(4) and its children in order to handle DMA tags in a hierarchical way and get rid of the sparc64_root_dma_tag kludge. Together with the previous two items this changes also allows to completely get rid of the nexus(4) IVAR interface. It also includes: - pushing the constraints previously specified by the nexus_dmatag down into the DMA tags of psycho(4) and sbus(4) as it's their IOMMUs which induce these restrictions (and nothing at the nexus(4) or anything that would warrant specifying them there), - fixing some obviously wrong constraints of the psycho(4) and sbus(4) DMA tags, which happened to not actually be used with the sparc64_root_dma_tag kludge in place and therefore didn't cause problems so far, - replacing magic constants for constraints with macros as far as it is obvious as to where they come from. This doesn't include taking advantage of the newbus way to get the parent DMA tags implemented by this change in order to divorce the IOTSBs of the PCI and SBus IOMMUs or for implementing the workaround for the DMA sync bug in Sabre (and Tomatillo) bridges, yet, though. o Get rid of the notion that nexus(4) (mostly) reflects an UPA bus by replacing ofw_upa.h and with ofw_nexus.h (which was repo-copied from ofw_upa.h) and renaming its content, which actually applies to all of Fireplane/Safari, JBus and UPA (in the host bus case), as appropriate. o Just use M_DEVBUF instead of a separate M_NEXUS malloc type for allocating the device info for the children of nexus(4). This is done in order to not need to export M_NEXUS when deriving drivers for subordinate busses from the nexus(4) class. o Use the DEFINE_CLASS_0() macro to declare the nexus(4) driver so we can derive subclasses from it. o Const'ify the nexus_excl_name and nexus_excl_type arrays as well as add 'associations' and 'rsc', which are pseudo-devices without resources and therefore of no real interest for nexus(4), to the former. o Let the nexus(4) device memory rman manage the entire 64-bit address space instead of just the UPA_MEMSTART to UPA_MEMEND subregion as Fireplane/Safari- and JBus-based machines use multiple ranges, which can't be as easily divided as in the case of UPA (limiting the address space only served for sanity checking anyway). o Use M_WAITOK instead of M_NOWAIT when allocating the device info for children of nexus(4) in order to give one less opportunity for adding devices to nexus(4) to fail. o While adapting the drivers affected by the above nexus(4) changes, change them to take advantage of rman_get_rid() instead of caching the RIDs assigned to allocated resources, now that the RIDs of resources are correctly set. o In iommu(4) and nexus(4) replace hard-coded functions names, which actually became outdated in several places, in panic strings and status massages with __func__. [1] o Use driver_filter_t in prototypes where appropriate. o Add my copyright to creator(4), fhc(4), nexus(4), psycho(4) and sbus(4) as I changed considerable amounts of these drivers as well as added a bunch of new features, workarounds for silicon bugs etc. o Fix some white space nits. Due to lack of access to Exx00 hardware, these changes, i.e. central(4) and fhc(4), couldn't be runtime tested on such a machine. Exx00 are currently reported to panic before trying to attach nexus(4) anyway though. PR: 76052 [1] Approved by: re (kensmith) diff 167308 Wed Mar 07 19:13:51 MST 2007 marius Rototill the sparc64 nexus(4) (actually this brings in the code the sun4v nexus(4) in turn is based on): o Change nexus(4) to manage the resources of its children so the respective device drivers don't need to figure them out of OFW themselves. o Change nexus(4) to provide the ofw_bus KOBJ interface instead of using IVARs for supplying the OFW node and the subset of standard properties of its children. Together with the previous change this also allows to fully take advantage of newbus in that drivers like fhc(4), which attach on multiple parent busses, no longer require different bus front-ends as obtaining the OFW node and properties as well as resource allocation works the same for all supported busses. As such this change also is part 4/4 of allowing creator(4) to work in USIII-based machines as it allows this driver to attach on both nexus(4) and upa(4). On the other hand removing these IVARs breaks API compatibility with the powerpc nexus(4) but which isn't that bad as a) sparc64 currently doesn't share any device driver hanging off of nexus(4) with powerpc and b) they were no longer compatible regarding OFW-related extensions at the pci(4) level since quite some time. o Provide bus_get_dma_tag methods in nexus(4) and its children in order to handle DMA tags in a hierarchical way and get rid of the sparc64_root_dma_tag kludge. Together with the previous two items this changes also allows to completely get rid of the nexus(4) IVAR interface. It also includes: - pushing the constraints previously specified by the nexus_dmatag down into the DMA tags of psycho(4) and sbus(4) as it's their IOMMUs which induce these restrictions (and nothing at the nexus(4) or anything that would warrant specifying them there), - fixing some obviously wrong constraints of the psycho(4) and sbus(4) DMA tags, which happened to not actually be used with the sparc64_root_dma_tag kludge in place and therefore didn't cause problems so far, - replacing magic constants for constraints with macros as far as it is obvious as to where they come from. This doesn't include taking advantage of the newbus way to get the parent DMA tags implemented by this change in order to divorce the IOTSBs of the PCI and SBus IOMMUs or for implementing the workaround for the DMA sync bug in Sabre (and Tomatillo) bridges, yet, though. o Get rid of the notion that nexus(4) (mostly) reflects an UPA bus by replacing ofw_upa.h and with ofw_nexus.h (which was repo-copied from ofw_upa.h) and renaming its content, which actually applies to all of Fireplane/Safari, JBus and UPA (in the host bus case), as appropriate. o Just use M_DEVBUF instead of a separate M_NEXUS malloc type for allocating the device info for the children of nexus(4). This is done in order to not need to export M_NEXUS when deriving drivers for subordinate busses from the nexus(4) class. o Use the DEFINE_CLASS_0() macro to declare the nexus(4) driver so we can derive subclasses from it. o Const'ify the nexus_excl_name and nexus_excl_type arrays as well as add 'associations' and 'rsc', which are pseudo-devices without resources and therefore of no real interest for nexus(4), to the former. o Let the nexus(4) device memory rman manage the entire 64-bit address space instead of just the UPA_MEMSTART to UPA_MEMEND subregion as Fireplane/Safari- and JBus-based machines use multiple ranges, which can't be as easily divided as in the case of UPA (limiting the address space only served for sanity checking anyway). o Use M_WAITOK instead of M_NOWAIT when allocating the device info for children of nexus(4) in order to give one less opportunity for adding devices to nexus(4) to fail. o While adapting the drivers affected by the above nexus(4) changes, change them to take advantage of rman_get_rid() instead of caching the RIDs assigned to allocated resources, now that the RIDs of resources are correctly set. o In iommu(4) and nexus(4) replace hard-coded functions names, which actually became outdated in several places, in panic strings and status massages with __func__. [1] o Use driver_filter_t in prototypes where appropriate. o Add my copyright to creator(4), fhc(4), nexus(4), psycho(4) and sbus(4) as I changed considerable amounts of these drivers as well as added a bunch of new features, workarounds for silicon bugs etc. o Fix some white space nits. Due to lack of access to Exx00 hardware, these changes, i.e. central(4) and fhc(4), couldn't be runtime tested on such a machine. Exx00 are currently reported to panic before trying to attach nexus(4) anyway though. PR: 76052 [1] Approved by: re (kensmith) diff 167308 Wed Mar 07 19:13:51 MST 2007 marius Rototill the sparc64 nexus(4) (actually this brings in the code the sun4v nexus(4) in turn is based on): o Change nexus(4) to manage the resources of its children so the respective device drivers don't need to figure them out of OFW themselves. o Change nexus(4) to provide the ofw_bus KOBJ interface instead of using IVARs for supplying the OFW node and the subset of standard properties of its children. Together with the previous change this also allows to fully take advantage of newbus in that drivers like fhc(4), which attach on multiple parent busses, no longer require different bus front-ends as obtaining the OFW node and properties as well as resource allocation works the same for all supported busses. As such this change also is part 4/4 of allowing creator(4) to work in USIII-based machines as it allows this driver to attach on both nexus(4) and upa(4). On the other hand removing these IVARs breaks API compatibility with the powerpc nexus(4) but which isn't that bad as a) sparc64 currently doesn't share any device driver hanging off of nexus(4) with powerpc and b) they were no longer compatible regarding OFW-related extensions at the pci(4) level since quite some time. o Provide bus_get_dma_tag methods in nexus(4) and its children in order to handle DMA tags in a hierarchical way and get rid of the sparc64_root_dma_tag kludge. Together with the previous two items this changes also allows to completely get rid of the nexus(4) IVAR interface. It also includes: - pushing the constraints previously specified by the nexus_dmatag down into the DMA tags of psycho(4) and sbus(4) as it's their IOMMUs which induce these restrictions (and nothing at the nexus(4) or anything that would warrant specifying them there), - fixing some obviously wrong constraints of the psycho(4) and sbus(4) DMA tags, which happened to not actually be used with the sparc64_root_dma_tag kludge in place and therefore didn't cause problems so far, - replacing magic constants for constraints with macros as far as it is obvious as to where they come from. This doesn't include taking advantage of the newbus way to get the parent DMA tags implemented by this change in order to divorce the IOTSBs of the PCI and SBus IOMMUs or for implementing the workaround for the DMA sync bug in Sabre (and Tomatillo) bridges, yet, though. o Get rid of the notion that nexus(4) (mostly) reflects an UPA bus by replacing ofw_upa.h and with ofw_nexus.h (which was repo-copied from ofw_upa.h) and renaming its content, which actually applies to all of Fireplane/Safari, JBus and UPA (in the host bus case), as appropriate. o Just use M_DEVBUF instead of a separate M_NEXUS malloc type for allocating the device info for the children of nexus(4). This is done in order to not need to export M_NEXUS when deriving drivers for subordinate busses from the nexus(4) class. o Use the DEFINE_CLASS_0() macro to declare the nexus(4) driver so we can derive subclasses from it. o Const'ify the nexus_excl_name and nexus_excl_type arrays as well as add 'associations' and 'rsc', which are pseudo-devices without resources and therefore of no real interest for nexus(4), to the former. o Let the nexus(4) device memory rman manage the entire 64-bit address space instead of just the UPA_MEMSTART to UPA_MEMEND subregion as Fireplane/Safari- and JBus-based machines use multiple ranges, which can't be as easily divided as in the case of UPA (limiting the address space only served for sanity checking anyway). o Use M_WAITOK instead of M_NOWAIT when allocating the device info for children of nexus(4) in order to give one less opportunity for adding devices to nexus(4) to fail. o While adapting the drivers affected by the above nexus(4) changes, change them to take advantage of rman_get_rid() instead of caching the RIDs assigned to allocated resources, now that the RIDs of resources are correctly set. o In iommu(4) and nexus(4) replace hard-coded functions names, which actually became outdated in several places, in panic strings and status massages with __func__. [1] o Use driver_filter_t in prototypes where appropriate. o Add my copyright to creator(4), fhc(4), nexus(4), psycho(4) and sbus(4) as I changed considerable amounts of these drivers as well as added a bunch of new features, workarounds for silicon bugs etc. o Fix some white space nits. Due to lack of access to Exx00 hardware, these changes, i.e. central(4) and fhc(4), couldn't be runtime tested on such a machine. Exx00 are currently reported to panic before trying to attach nexus(4) anyway though. PR: 76052 [1] Approved by: re (kensmith) diff 167308 Wed Mar 07 19:13:51 MST 2007 marius Rototill the sparc64 nexus(4) (actually this brings in the code the sun4v nexus(4) in turn is based on): o Change nexus(4) to manage the resources of its children so the respective device drivers don't need to figure them out of OFW themselves. o Change nexus(4) to provide the ofw_bus KOBJ interface instead of using IVARs for supplying the OFW node and the subset of standard properties of its children. Together with the previous change this also allows to fully take advantage of newbus in that drivers like fhc(4), which attach on multiple parent busses, no longer require different bus front-ends as obtaining the OFW node and properties as well as resource allocation works the same for all supported busses. As such this change also is part 4/4 of allowing creator(4) to work in USIII-based machines as it allows this driver to attach on both nexus(4) and upa(4). On the other hand removing these IVARs breaks API compatibility with the powerpc nexus(4) but which isn't that bad as a) sparc64 currently doesn't share any device driver hanging off of nexus(4) with powerpc and b) they were no longer compatible regarding OFW-related extensions at the pci(4) level since quite some time. o Provide bus_get_dma_tag methods in nexus(4) and its children in order to handle DMA tags in a hierarchical way and get rid of the sparc64_root_dma_tag kludge. Together with the previous two items this changes also allows to completely get rid of the nexus(4) IVAR interface. It also includes: - pushing the constraints previously specified by the nexus_dmatag down into the DMA tags of psycho(4) and sbus(4) as it's their IOMMUs which induce these restrictions (and nothing at the nexus(4) or anything that would warrant specifying them there), - fixing some obviously wrong constraints of the psycho(4) and sbus(4) DMA tags, which happened to not actually be used with the sparc64_root_dma_tag kludge in place and therefore didn't cause problems so far, - replacing magic constants for constraints with macros as far as it is obvious as to where they come from. This doesn't include taking advantage of the newbus way to get the parent DMA tags implemented by this change in order to divorce the IOTSBs of the PCI and SBus IOMMUs or for implementing the workaround for the DMA sync bug in Sabre (and Tomatillo) bridges, yet, though. o Get rid of the notion that nexus(4) (mostly) reflects an UPA bus by replacing ofw_upa.h and with ofw_nexus.h (which was repo-copied from ofw_upa.h) and renaming its content, which actually applies to all of Fireplane/Safari, JBus and UPA (in the host bus case), as appropriate. o Just use M_DEVBUF instead of a separate M_NEXUS malloc type for allocating the device info for the children of nexus(4). This is done in order to not need to export M_NEXUS when deriving drivers for subordinate busses from the nexus(4) class. o Use the DEFINE_CLASS_0() macro to declare the nexus(4) driver so we can derive subclasses from it. o Const'ify the nexus_excl_name and nexus_excl_type arrays as well as add 'associations' and 'rsc', which are pseudo-devices without resources and therefore of no real interest for nexus(4), to the former. o Let the nexus(4) device memory rman manage the entire 64-bit address space instead of just the UPA_MEMSTART to UPA_MEMEND subregion as Fireplane/Safari- and JBus-based machines use multiple ranges, which can't be as easily divided as in the case of UPA (limiting the address space only served for sanity checking anyway). o Use M_WAITOK instead of M_NOWAIT when allocating the device info for children of nexus(4) in order to give one less opportunity for adding devices to nexus(4) to fail. o While adapting the drivers affected by the above nexus(4) changes, change them to take advantage of rman_get_rid() instead of caching the RIDs assigned to allocated resources, now that the RIDs of resources are correctly set. o In iommu(4) and nexus(4) replace hard-coded functions names, which actually became outdated in several places, in panic strings and status massages with __func__. [1] o Use driver_filter_t in prototypes where appropriate. o Add my copyright to creator(4), fhc(4), nexus(4), psycho(4) and sbus(4) as I changed considerable amounts of these drivers as well as added a bunch of new features, workarounds for silicon bugs etc. o Fix some white space nits. Due to lack of access to Exx00 hardware, these changes, i.e. central(4) and fhc(4), couldn't be runtime tested on such a machine. Exx00 are currently reported to panic before trying to attach nexus(4) anyway though. PR: 76052 [1] Approved by: re (kensmith) diff 167308 Wed Mar 07 19:13:51 MST 2007 marius Rototill the sparc64 nexus(4) (actually this brings in the code the sun4v nexus(4) in turn is based on): o Change nexus(4) to manage the resources of its children so the respective device drivers don't need to figure them out of OFW themselves. o Change nexus(4) to provide the ofw_bus KOBJ interface instead of using IVARs for supplying the OFW node and the subset of standard properties of its children. Together with the previous change this also allows to fully take advantage of newbus in that drivers like fhc(4), which attach on multiple parent busses, no longer require different bus front-ends as obtaining the OFW node and properties as well as resource allocation works the same for all supported busses. As such this change also is part 4/4 of allowing creator(4) to work in USIII-based machines as it allows this driver to attach on both nexus(4) and upa(4). On the other hand removing these IVARs breaks API compatibility with the powerpc nexus(4) but which isn't that bad as a) sparc64 currently doesn't share any device driver hanging off of nexus(4) with powerpc and b) they were no longer compatible regarding OFW-related extensions at the pci(4) level since quite some time. o Provide bus_get_dma_tag methods in nexus(4) and its children in order to handle DMA tags in a hierarchical way and get rid of the sparc64_root_dma_tag kludge. Together with the previous two items this changes also allows to completely get rid of the nexus(4) IVAR interface. It also includes: - pushing the constraints previously specified by the nexus_dmatag down into the DMA tags of psycho(4) and sbus(4) as it's their IOMMUs which induce these restrictions (and nothing at the nexus(4) or anything that would warrant specifying them there), - fixing some obviously wrong constraints of the psycho(4) and sbus(4) DMA tags, which happened to not actually be used with the sparc64_root_dma_tag kludge in place and therefore didn't cause problems so far, - replacing magic constants for constraints with macros as far as it is obvious as to where they come from. This doesn't include taking advantage of the newbus way to get the parent DMA tags implemented by this change in order to divorce the IOTSBs of the PCI and SBus IOMMUs or for implementing the workaround for the DMA sync bug in Sabre (and Tomatillo) bridges, yet, though. o Get rid of the notion that nexus(4) (mostly) reflects an UPA bus by replacing ofw_upa.h and with ofw_nexus.h (which was repo-copied from ofw_upa.h) and renaming its content, which actually applies to all of Fireplane/Safari, JBus and UPA (in the host bus case), as appropriate. o Just use M_DEVBUF instead of a separate M_NEXUS malloc type for allocating the device info for the children of nexus(4). This is done in order to not need to export M_NEXUS when deriving drivers for subordinate busses from the nexus(4) class. o Use the DEFINE_CLASS_0() macro to declare the nexus(4) driver so we can derive subclasses from it. o Const'ify the nexus_excl_name and nexus_excl_type arrays as well as add 'associations' and 'rsc', which are pseudo-devices without resources and therefore of no real interest for nexus(4), to the former. o Let the nexus(4) device memory rman manage the entire 64-bit address space instead of just the UPA_MEMSTART to UPA_MEMEND subregion as Fireplane/Safari- and JBus-based machines use multiple ranges, which can't be as easily divided as in the case of UPA (limiting the address space only served for sanity checking anyway). o Use M_WAITOK instead of M_NOWAIT when allocating the device info for children of nexus(4) in order to give one less opportunity for adding devices to nexus(4) to fail. o While adapting the drivers affected by the above nexus(4) changes, change them to take advantage of rman_get_rid() instead of caching the RIDs assigned to allocated resources, now that the RIDs of resources are correctly set. o In iommu(4) and nexus(4) replace hard-coded functions names, which actually became outdated in several places, in panic strings and status massages with __func__. [1] o Use driver_filter_t in prototypes where appropriate. o Add my copyright to creator(4), fhc(4), nexus(4), psycho(4) and sbus(4) as I changed considerable amounts of these drivers as well as added a bunch of new features, workarounds for silicon bugs etc. o Fix some white space nits. Due to lack of access to Exx00 hardware, these changes, i.e. central(4) and fhc(4), couldn't be runtime tested on such a machine. Exx00 are currently reported to panic before trying to attach nexus(4) anyway though. PR: 76052 [1] Approved by: re (kensmith) diff 167308 Wed Mar 07 19:13:51 MST 2007 marius Rototill the sparc64 nexus(4) (actually this brings in the code the sun4v nexus(4) in turn is based on): o Change nexus(4) to manage the resources of its children so the respective device drivers don't need to figure them out of OFW themselves. o Change nexus(4) to provide the ofw_bus KOBJ interface instead of using IVARs for supplying the OFW node and the subset of standard properties of its children. Together with the previous change this also allows to fully take advantage of newbus in that drivers like fhc(4), which attach on multiple parent busses, no longer require different bus front-ends as obtaining the OFW node and properties as well as resource allocation works the same for all supported busses. As such this change also is part 4/4 of allowing creator(4) to work in USIII-based machines as it allows this driver to attach on both nexus(4) and upa(4). On the other hand removing these IVARs breaks API compatibility with the powerpc nexus(4) but which isn't that bad as a) sparc64 currently doesn't share any device driver hanging off of nexus(4) with powerpc and b) they were no longer compatible regarding OFW-related extensions at the pci(4) level since quite some time. o Provide bus_get_dma_tag methods in nexus(4) and its children in order to handle DMA tags in a hierarchical way and get rid of the sparc64_root_dma_tag kludge. Together with the previous two items this changes also allows to completely get rid of the nexus(4) IVAR interface. It also includes: - pushing the constraints previously specified by the nexus_dmatag down into the DMA tags of psycho(4) and sbus(4) as it's their IOMMUs which induce these restrictions (and nothing at the nexus(4) or anything that would warrant specifying them there), - fixing some obviously wrong constraints of the psycho(4) and sbus(4) DMA tags, which happened to not actually be used with the sparc64_root_dma_tag kludge in place and therefore didn't cause problems so far, - replacing magic constants for constraints with macros as far as it is obvious as to where they come from. This doesn't include taking advantage of the newbus way to get the parent DMA tags implemented by this change in order to divorce the IOTSBs of the PCI and SBus IOMMUs or for implementing the workaround for the DMA sync bug in Sabre (and Tomatillo) bridges, yet, though. o Get rid of the notion that nexus(4) (mostly) reflects an UPA bus by replacing ofw_upa.h and with ofw_nexus.h (which was repo-copied from ofw_upa.h) and renaming its content, which actually applies to all of Fireplane/Safari, JBus and UPA (in the host bus case), as appropriate. o Just use M_DEVBUF instead of a separate M_NEXUS malloc type for allocating the device info for the children of nexus(4). This is done in order to not need to export M_NEXUS when deriving drivers for subordinate busses from the nexus(4) class. o Use the DEFINE_CLASS_0() macro to declare the nexus(4) driver so we can derive subclasses from it. o Const'ify the nexus_excl_name and nexus_excl_type arrays as well as add 'associations' and 'rsc', which are pseudo-devices without resources and therefore of no real interest for nexus(4), to the former. o Let the nexus(4) device memory rman manage the entire 64-bit address space instead of just the UPA_MEMSTART to UPA_MEMEND subregion as Fireplane/Safari- and JBus-based machines use multiple ranges, which can't be as easily divided as in the case of UPA (limiting the address space only served for sanity checking anyway). o Use M_WAITOK instead of M_NOWAIT when allocating the device info for children of nexus(4) in order to give one less opportunity for adding devices to nexus(4) to fail. o While adapting the drivers affected by the above nexus(4) changes, change them to take advantage of rman_get_rid() instead of caching the RIDs assigned to allocated resources, now that the RIDs of resources are correctly set. o In iommu(4) and nexus(4) replace hard-coded functions names, which actually became outdated in several places, in panic strings and status massages with __func__. [1] o Use driver_filter_t in prototypes where appropriate. o Add my copyright to creator(4), fhc(4), nexus(4), psycho(4) and sbus(4) as I changed considerable amounts of these drivers as well as added a bunch of new features, workarounds for silicon bugs etc. o Fix some white space nits. Due to lack of access to Exx00 hardware, these changes, i.e. central(4) and fhc(4), couldn't be runtime tested on such a machine. Exx00 are currently reported to panic before trying to attach nexus(4) anyway though. PR: 76052 [1] Approved by: re (kensmith) diff 167308 Wed Mar 07 19:13:51 MST 2007 marius Rototill the sparc64 nexus(4) (actually this brings in the code the sun4v nexus(4) in turn is based on): o Change nexus(4) to manage the resources of its children so the respective device drivers don't need to figure them out of OFW themselves. o Change nexus(4) to provide the ofw_bus KOBJ interface instead of using IVARs for supplying the OFW node and the subset of standard properties of its children. Together with the previous change this also allows to fully take advantage of newbus in that drivers like fhc(4), which attach on multiple parent busses, no longer require different bus front-ends as obtaining the OFW node and properties as well as resource allocation works the same for all supported busses. As such this change also is part 4/4 of allowing creator(4) to work in USIII-based machines as it allows this driver to attach on both nexus(4) and upa(4). On the other hand removing these IVARs breaks API compatibility with the powerpc nexus(4) but which isn't that bad as a) sparc64 currently doesn't share any device driver hanging off of nexus(4) with powerpc and b) they were no longer compatible regarding OFW-related extensions at the pci(4) level since quite some time. o Provide bus_get_dma_tag methods in nexus(4) and its children in order to handle DMA tags in a hierarchical way and get rid of the sparc64_root_dma_tag kludge. Together with the previous two items this changes also allows to completely get rid of the nexus(4) IVAR interface. It also includes: - pushing the constraints previously specified by the nexus_dmatag down into the DMA tags of psycho(4) and sbus(4) as it's their IOMMUs which induce these restrictions (and nothing at the nexus(4) or anything that would warrant specifying them there), - fixing some obviously wrong constraints of the psycho(4) and sbus(4) DMA tags, which happened to not actually be used with the sparc64_root_dma_tag kludge in place and therefore didn't cause problems so far, - replacing magic constants for constraints with macros as far as it is obvious as to where they come from. This doesn't include taking advantage of the newbus way to get the parent DMA tags implemented by this change in order to divorce the IOTSBs of the PCI and SBus IOMMUs or for implementing the workaround for the DMA sync bug in Sabre (and Tomatillo) bridges, yet, though. o Get rid of the notion that nexus(4) (mostly) reflects an UPA bus by replacing ofw_upa.h and with ofw_nexus.h (which was repo-copied from ofw_upa.h) and renaming its content, which actually applies to all of Fireplane/Safari, JBus and UPA (in the host bus case), as appropriate. o Just use M_DEVBUF instead of a separate M_NEXUS malloc type for allocating the device info for the children of nexus(4). This is done in order to not need to export M_NEXUS when deriving drivers for subordinate busses from the nexus(4) class. o Use the DEFINE_CLASS_0() macro to declare the nexus(4) driver so we can derive subclasses from it. o Const'ify the nexus_excl_name and nexus_excl_type arrays as well as add 'associations' and 'rsc', which are pseudo-devices without resources and therefore of no real interest for nexus(4), to the former. o Let the nexus(4) device memory rman manage the entire 64-bit address space instead of just the UPA_MEMSTART to UPA_MEMEND subregion as Fireplane/Safari- and JBus-based machines use multiple ranges, which can't be as easily divided as in the case of UPA (limiting the address space only served for sanity checking anyway). o Use M_WAITOK instead of M_NOWAIT when allocating the device info for children of nexus(4) in order to give one less opportunity for adding devices to nexus(4) to fail. o While adapting the drivers affected by the above nexus(4) changes, change them to take advantage of rman_get_rid() instead of caching the RIDs assigned to allocated resources, now that the RIDs of resources are correctly set. o In iommu(4) and nexus(4) replace hard-coded functions names, which actually became outdated in several places, in panic strings and status massages with __func__. [1] o Use driver_filter_t in prototypes where appropriate. o Add my copyright to creator(4), fhc(4), nexus(4), psycho(4) and sbus(4) as I changed considerable amounts of these drivers as well as added a bunch of new features, workarounds for silicon bugs etc. o Fix some white space nits. Due to lack of access to Exx00 hardware, these changes, i.e. central(4) and fhc(4), couldn't be runtime tested on such a machine. Exx00 are currently reported to panic before trying to attach nexus(4) anyway though. PR: 76052 [1] Approved by: re (kensmith) diff 167308 Wed Mar 07 19:13:51 MST 2007 marius Rototill the sparc64 nexus(4) (actually this brings in the code the sun4v nexus(4) in turn is based on): o Change nexus(4) to manage the resources of its children so the respective device drivers don't need to figure them out of OFW themselves. o Change nexus(4) to provide the ofw_bus KOBJ interface instead of using IVARs for supplying the OFW node and the subset of standard properties of its children. Together with the previous change this also allows to fully take advantage of newbus in that drivers like fhc(4), which attach on multiple parent busses, no longer require different bus front-ends as obtaining the OFW node and properties as well as resource allocation works the same for all supported busses. As such this change also is part 4/4 of allowing creator(4) to work in USIII-based machines as it allows this driver to attach on both nexus(4) and upa(4). On the other hand removing these IVARs breaks API compatibility with the powerpc nexus(4) but which isn't that bad as a) sparc64 currently doesn't share any device driver hanging off of nexus(4) with powerpc and b) they were no longer compatible regarding OFW-related extensions at the pci(4) level since quite some time. o Provide bus_get_dma_tag methods in nexus(4) and its children in order to handle DMA tags in a hierarchical way and get rid of the sparc64_root_dma_tag kludge. Together with the previous two items this changes also allows to completely get rid of the nexus(4) IVAR interface. It also includes: - pushing the constraints previously specified by the nexus_dmatag down into the DMA tags of psycho(4) and sbus(4) as it's their IOMMUs which induce these restrictions (and nothing at the nexus(4) or anything that would warrant specifying them there), - fixing some obviously wrong constraints of the psycho(4) and sbus(4) DMA tags, which happened to not actually be used with the sparc64_root_dma_tag kludge in place and therefore didn't cause problems so far, - replacing magic constants for constraints with macros as far as it is obvious as to where they come from. This doesn't include taking advantage of the newbus way to get the parent DMA tags implemented by this change in order to divorce the IOTSBs of the PCI and SBus IOMMUs or for implementing the workaround for the DMA sync bug in Sabre (and Tomatillo) bridges, yet, though. o Get rid of the notion that nexus(4) (mostly) reflects an UPA bus by replacing ofw_upa.h and with ofw_nexus.h (which was repo-copied from ofw_upa.h) and renaming its content, which actually applies to all of Fireplane/Safari, JBus and UPA (in the host bus case), as appropriate. o Just use M_DEVBUF instead of a separate M_NEXUS malloc type for allocating the device info for the children of nexus(4). This is done in order to not need to export M_NEXUS when deriving drivers for subordinate busses from the nexus(4) class. o Use the DEFINE_CLASS_0() macro to declare the nexus(4) driver so we can derive subclasses from it. o Const'ify the nexus_excl_name and nexus_excl_type arrays as well as add 'associations' and 'rsc', which are pseudo-devices without resources and therefore of no real interest for nexus(4), to the former. o Let the nexus(4) device memory rman manage the entire 64-bit address space instead of just the UPA_MEMSTART to UPA_MEMEND subregion as Fireplane/Safari- and JBus-based machines use multiple ranges, which can't be as easily divided as in the case of UPA (limiting the address space only served for sanity checking anyway). o Use M_WAITOK instead of M_NOWAIT when allocating the device info for children of nexus(4) in order to give one less opportunity for adding devices to nexus(4) to fail. o While adapting the drivers affected by the above nexus(4) changes, change them to take advantage of rman_get_rid() instead of caching the RIDs assigned to allocated resources, now that the RIDs of resources are correctly set. o In iommu(4) and nexus(4) replace hard-coded functions names, which actually became outdated in several places, in panic strings and status massages with __func__. [1] o Use driver_filter_t in prototypes where appropriate. o Add my copyright to creator(4), fhc(4), nexus(4), psycho(4) and sbus(4) as I changed considerable amounts of these drivers as well as added a bunch of new features, workarounds for silicon bugs etc. o Fix some white space nits. Due to lack of access to Exx00 hardware, these changes, i.e. central(4) and fhc(4), couldn't be runtime tested on such a machine. Exx00 are currently reported to panic before trying to attach nexus(4) anyway though. PR: 76052 [1] Approved by: re (kensmith) diff 167308 Wed Mar 07 19:13:51 MST 2007 marius Rototill the sparc64 nexus(4) (actually this brings in the code the sun4v nexus(4) in turn is based on): o Change nexus(4) to manage the resources of its children so the respective device drivers don't need to figure them out of OFW themselves. o Change nexus(4) to provide the ofw_bus KOBJ interface instead of using IVARs for supplying the OFW node and the subset of standard properties of its children. Together with the previous change this also allows to fully take advantage of newbus in that drivers like fhc(4), which attach on multiple parent busses, no longer require different bus front-ends as obtaining the OFW node and properties as well as resource allocation works the same for all supported busses. As such this change also is part 4/4 of allowing creator(4) to work in USIII-based machines as it allows this driver to attach on both nexus(4) and upa(4). On the other hand removing these IVARs breaks API compatibility with the powerpc nexus(4) but which isn't that bad as a) sparc64 currently doesn't share any device driver hanging off of nexus(4) with powerpc and b) they were no longer compatible regarding OFW-related extensions at the pci(4) level since quite some time. o Provide bus_get_dma_tag methods in nexus(4) and its children in order to handle DMA tags in a hierarchical way and get rid of the sparc64_root_dma_tag kludge. Together with the previous two items this changes also allows to completely get rid of the nexus(4) IVAR interface. It also includes: - pushing the constraints previously specified by the nexus_dmatag down into the DMA tags of psycho(4) and sbus(4) as it's their IOMMUs which induce these restrictions (and nothing at the nexus(4) or anything that would warrant specifying them there), - fixing some obviously wrong constraints of the psycho(4) and sbus(4) DMA tags, which happened to not actually be used with the sparc64_root_dma_tag kludge in place and therefore didn't cause problems so far, - replacing magic constants for constraints with macros as far as it is obvious as to where they come from. This doesn't include taking advantage of the newbus way to get the parent DMA tags implemented by this change in order to divorce the IOTSBs of the PCI and SBus IOMMUs or for implementing the workaround for the DMA sync bug in Sabre (and Tomatillo) bridges, yet, though. o Get rid of the notion that nexus(4) (mostly) reflects an UPA bus by replacing ofw_upa.h and with ofw_nexus.h (which was repo-copied from ofw_upa.h) and renaming its content, which actually applies to all of Fireplane/Safari, JBus and UPA (in the host bus case), as appropriate. o Just use M_DEVBUF instead of a separate M_NEXUS malloc type for allocating the device info for the children of nexus(4). This is done in order to not need to export M_NEXUS when deriving drivers for subordinate busses from the nexus(4) class. o Use the DEFINE_CLASS_0() macro to declare the nexus(4) driver so we can derive subclasses from it. o Const'ify the nexus_excl_name and nexus_excl_type arrays as well as add 'associations' and 'rsc', which are pseudo-devices without resources and therefore of no real interest for nexus(4), to the former. o Let the nexus(4) device memory rman manage the entire 64-bit address space instead of just the UPA_MEMSTART to UPA_MEMEND subregion as Fireplane/Safari- and JBus-based machines use multiple ranges, which can't be as easily divided as in the case of UPA (limiting the address space only served for sanity checking anyway). o Use M_WAITOK instead of M_NOWAIT when allocating the device info for children of nexus(4) in order to give one less opportunity for adding devices to nexus(4) to fail. o While adapting the drivers affected by the above nexus(4) changes, change them to take advantage of rman_get_rid() instead of caching the RIDs assigned to allocated resources, now that the RIDs of resources are correctly set. o In iommu(4) and nexus(4) replace hard-coded functions names, which actually became outdated in several places, in panic strings and status massages with __func__. [1] o Use driver_filter_t in prototypes where appropriate. o Add my copyright to creator(4), fhc(4), nexus(4), psycho(4) and sbus(4) as I changed considerable amounts of these drivers as well as added a bunch of new features, workarounds for silicon bugs etc. o Fix some white space nits. Due to lack of access to Exx00 hardware, these changes, i.e. central(4) and fhc(4), couldn't be runtime tested on such a machine. Exx00 are currently reported to panic before trying to attach nexus(4) anyway though. PR: 76052 [1] Approved by: re (kensmith) diff 167308 Wed Mar 07 19:13:51 MST 2007 marius Rototill the sparc64 nexus(4) (actually this brings in the code the sun4v nexus(4) in turn is based on): o Change nexus(4) to manage the resources of its children so the respective device drivers don't need to figure them out of OFW themselves. o Change nexus(4) to provide the ofw_bus KOBJ interface instead of using IVARs for supplying the OFW node and the subset of standard properties of its children. Together with the previous change this also allows to fully take advantage of newbus in that drivers like fhc(4), which attach on multiple parent busses, no longer require different bus front-ends as obtaining the OFW node and properties as well as resource allocation works the same for all supported busses. As such this change also is part 4/4 of allowing creator(4) to work in USIII-based machines as it allows this driver to attach on both nexus(4) and upa(4). On the other hand removing these IVARs breaks API compatibility with the powerpc nexus(4) but which isn't that bad as a) sparc64 currently doesn't share any device driver hanging off of nexus(4) with powerpc and b) they were no longer compatible regarding OFW-related extensions at the pci(4) level since quite some time. o Provide bus_get_dma_tag methods in nexus(4) and its children in order to handle DMA tags in a hierarchical way and get rid of the sparc64_root_dma_tag kludge. Together with the previous two items this changes also allows to completely get rid of the nexus(4) IVAR interface. It also includes: - pushing the constraints previously specified by the nexus_dmatag down into the DMA tags of psycho(4) and sbus(4) as it's their IOMMUs which induce these restrictions (and nothing at the nexus(4) or anything that would warrant specifying them there), - fixing some obviously wrong constraints of the psycho(4) and sbus(4) DMA tags, which happened to not actually be used with the sparc64_root_dma_tag kludge in place and therefore didn't cause problems so far, - replacing magic constants for constraints with macros as far as it is obvious as to where they come from. This doesn't include taking advantage of the newbus way to get the parent DMA tags implemented by this change in order to divorce the IOTSBs of the PCI and SBus IOMMUs or for implementing the workaround for the DMA sync bug in Sabre (and Tomatillo) bridges, yet, though. o Get rid of the notion that nexus(4) (mostly) reflects an UPA bus by replacing ofw_upa.h and with ofw_nexus.h (which was repo-copied from ofw_upa.h) and renaming its content, which actually applies to all of Fireplane/Safari, JBus and UPA (in the host bus case), as appropriate. o Just use M_DEVBUF instead of a separate M_NEXUS malloc type for allocating the device info for the children of nexus(4). This is done in order to not need to export M_NEXUS when deriving drivers for subordinate busses from the nexus(4) class. o Use the DEFINE_CLASS_0() macro to declare the nexus(4) driver so we can derive subclasses from it. o Const'ify the nexus_excl_name and nexus_excl_type arrays as well as add 'associations' and 'rsc', which are pseudo-devices without resources and therefore of no real interest for nexus(4), to the former. o Let the nexus(4) device memory rman manage the entire 64-bit address space instead of just the UPA_MEMSTART to UPA_MEMEND subregion as Fireplane/Safari- and JBus-based machines use multiple ranges, which can't be as easily divided as in the case of UPA (limiting the address space only served for sanity checking anyway). o Use M_WAITOK instead of M_NOWAIT when allocating the device info for children of nexus(4) in order to give one less opportunity for adding devices to nexus(4) to fail. o While adapting the drivers affected by the above nexus(4) changes, change them to take advantage of rman_get_rid() instead of caching the RIDs assigned to allocated resources, now that the RIDs of resources are correctly set. o In iommu(4) and nexus(4) replace hard-coded functions names, which actually became outdated in several places, in panic strings and status massages with __func__. [1] o Use driver_filter_t in prototypes where appropriate. o Add my copyright to creator(4), fhc(4), nexus(4), psycho(4) and sbus(4) as I changed considerable amounts of these drivers as well as added a bunch of new features, workarounds for silicon bugs etc. o Fix some white space nits. Due to lack of access to Exx00 hardware, these changes, i.e. central(4) and fhc(4), couldn't be runtime tested on such a machine. Exx00 are currently reported to panic before trying to attach nexus(4) anyway though. PR: 76052 [1] Approved by: re (kensmith) diff 167308 Wed Mar 07 19:13:51 MST 2007 marius Rototill the sparc64 nexus(4) (actually this brings in the code the sun4v nexus(4) in turn is based on): o Change nexus(4) to manage the resources of its children so the respective device drivers don't need to figure them out of OFW themselves. o Change nexus(4) to provide the ofw_bus KOBJ interface instead of using IVARs for supplying the OFW node and the subset of standard properties of its children. Together with the previous change this also allows to fully take advantage of newbus in that drivers like fhc(4), which attach on multiple parent busses, no longer require different bus front-ends as obtaining the OFW node and properties as well as resource allocation works the same for all supported busses. As such this change also is part 4/4 of allowing creator(4) to work in USIII-based machines as it allows this driver to attach on both nexus(4) and upa(4). On the other hand removing these IVARs breaks API compatibility with the powerpc nexus(4) but which isn't that bad as a) sparc64 currently doesn't share any device driver hanging off of nexus(4) with powerpc and b) they were no longer compatible regarding OFW-related extensions at the pci(4) level since quite some time. o Provide bus_get_dma_tag methods in nexus(4) and its children in order to handle DMA tags in a hierarchical way and get rid of the sparc64_root_dma_tag kludge. Together with the previous two items this changes also allows to completely get rid of the nexus(4) IVAR interface. It also includes: - pushing the constraints previously specified by the nexus_dmatag down into the DMA tags of psycho(4) and sbus(4) as it's their IOMMUs which induce these restrictions (and nothing at the nexus(4) or anything that would warrant specifying them there), - fixing some obviously wrong constraints of the psycho(4) and sbus(4) DMA tags, which happened to not actually be used with the sparc64_root_dma_tag kludge in place and therefore didn't cause problems so far, - replacing magic constants for constraints with macros as far as it is obvious as to where they come from. This doesn't include taking advantage of the newbus way to get the parent DMA tags implemented by this change in order to divorce the IOTSBs of the PCI and SBus IOMMUs or for implementing the workaround for the DMA sync bug in Sabre (and Tomatillo) bridges, yet, though. o Get rid of the notion that nexus(4) (mostly) reflects an UPA bus by replacing ofw_upa.h and with ofw_nexus.h (which was repo-copied from ofw_upa.h) and renaming its content, which actually applies to all of Fireplane/Safari, JBus and UPA (in the host bus case), as appropriate. o Just use M_DEVBUF instead of a separate M_NEXUS malloc type for allocating the device info for the children of nexus(4). This is done in order to not need to export M_NEXUS when deriving drivers for subordinate busses from the nexus(4) class. o Use the DEFINE_CLASS_0() macro to declare the nexus(4) driver so we can derive subclasses from it. o Const'ify the nexus_excl_name and nexus_excl_type arrays as well as add 'associations' and 'rsc', which are pseudo-devices without resources and therefore of no real interest for nexus(4), to the former. o Let the nexus(4) device memory rman manage the entire 64-bit address space instead of just the UPA_MEMSTART to UPA_MEMEND subregion as Fireplane/Safari- and JBus-based machines use multiple ranges, which can't be as easily divided as in the case of UPA (limiting the address space only served for sanity checking anyway). o Use M_WAITOK instead of M_NOWAIT when allocating the device info for children of nexus(4) in order to give one less opportunity for adding devices to nexus(4) to fail. o While adapting the drivers affected by the above nexus(4) changes, change them to take advantage of rman_get_rid() instead of caching the RIDs assigned to allocated resources, now that the RIDs of resources are correctly set. o In iommu(4) and nexus(4) replace hard-coded functions names, which actually became outdated in several places, in panic strings and status massages with __func__. [1] o Use driver_filter_t in prototypes where appropriate. o Add my copyright to creator(4), fhc(4), nexus(4), psycho(4) and sbus(4) as I changed considerable amounts of these drivers as well as added a bunch of new features, workarounds for silicon bugs etc. o Fix some white space nits. Due to lack of access to Exx00 hardware, these changes, i.e. central(4) and fhc(4), couldn't be runtime tested on such a machine. Exx00 are currently reported to panic before trying to attach nexus(4) anyway though. PR: 76052 [1] Approved by: re (kensmith) diff 167308 Wed Mar 07 19:13:51 MST 2007 marius Rototill the sparc64 nexus(4) (actually this brings in the code the sun4v nexus(4) in turn is based on): o Change nexus(4) to manage the resources of its children so the respective device drivers don't need to figure them out of OFW themselves. o Change nexus(4) to provide the ofw_bus KOBJ interface instead of using IVARs for supplying the OFW node and the subset of standard properties of its children. Together with the previous change this also allows to fully take advantage of newbus in that drivers like fhc(4), which attach on multiple parent busses, no longer require different bus front-ends as obtaining the OFW node and properties as well as resource allocation works the same for all supported busses. As such this change also is part 4/4 of allowing creator(4) to work in USIII-based machines as it allows this driver to attach on both nexus(4) and upa(4). On the other hand removing these IVARs breaks API compatibility with the powerpc nexus(4) but which isn't that bad as a) sparc64 currently doesn't share any device driver hanging off of nexus(4) with powerpc and b) they were no longer compatible regarding OFW-related extensions at the pci(4) level since quite some time. o Provide bus_get_dma_tag methods in nexus(4) and its children in order to handle DMA tags in a hierarchical way and get rid of the sparc64_root_dma_tag kludge. Together with the previous two items this changes also allows to completely get rid of the nexus(4) IVAR interface. It also includes: - pushing the constraints previously specified by the nexus_dmatag down into the DMA tags of psycho(4) and sbus(4) as it's their IOMMUs which induce these restrictions (and nothing at the nexus(4) or anything that would warrant specifying them there), - fixing some obviously wrong constraints of the psycho(4) and sbus(4) DMA tags, which happened to not actually be used with the sparc64_root_dma_tag kludge in place and therefore didn't cause problems so far, - replacing magic constants for constraints with macros as far as it is obvious as to where they come from. This doesn't include taking advantage of the newbus way to get the parent DMA tags implemented by this change in order to divorce the IOTSBs of the PCI and SBus IOMMUs or for implementing the workaround for the DMA sync bug in Sabre (and Tomatillo) bridges, yet, though. o Get rid of the notion that nexus(4) (mostly) reflects an UPA bus by replacing ofw_upa.h and with ofw_nexus.h (which was repo-copied from ofw_upa.h) and renaming its content, which actually applies to all of Fireplane/Safari, JBus and UPA (in the host bus case), as appropriate. o Just use M_DEVBUF instead of a separate M_NEXUS malloc type for allocating the device info for the children of nexus(4). This is done in order to not need to export M_NEXUS when deriving drivers for subordinate busses from the nexus(4) class. o Use the DEFINE_CLASS_0() macro to declare the nexus(4) driver so we can derive subclasses from it. o Const'ify the nexus_excl_name and nexus_excl_type arrays as well as add 'associations' and 'rsc', which are pseudo-devices without resources and therefore of no real interest for nexus(4), to the former. o Let the nexus(4) device memory rman manage the entire 64-bit address space instead of just the UPA_MEMSTART to UPA_MEMEND subregion as Fireplane/Safari- and JBus-based machines use multiple ranges, which can't be as easily divided as in the case of UPA (limiting the address space only served for sanity checking anyway). o Use M_WAITOK instead of M_NOWAIT when allocating the device info for children of nexus(4) in order to give one less opportunity for adding devices to nexus(4) to fail. o While adapting the drivers affected by the above nexus(4) changes, change them to take advantage of rman_get_rid() instead of caching the RIDs assigned to allocated resources, now that the RIDs of resources are correctly set. o In iommu(4) and nexus(4) replace hard-coded functions names, which actually became outdated in several places, in panic strings and status massages with __func__. [1] o Use driver_filter_t in prototypes where appropriate. o Add my copyright to creator(4), fhc(4), nexus(4), psycho(4) and sbus(4) as I changed considerable amounts of these drivers as well as added a bunch of new features, workarounds for silicon bugs etc. o Fix some white space nits. Due to lack of access to Exx00 hardware, these changes, i.e. central(4) and fhc(4), couldn't be runtime tested on such a machine. Exx00 are currently reported to panic before trying to attach nexus(4) anyway though. PR: 76052 [1] Approved by: re (kensmith) diff 167308 Wed Mar 07 19:13:51 MST 2007 marius Rototill the sparc64 nexus(4) (actually this brings in the code the sun4v nexus(4) in turn is based on): o Change nexus(4) to manage the resources of its children so the respective device drivers don't need to figure them out of OFW themselves. o Change nexus(4) to provide the ofw_bus KOBJ interface instead of using IVARs for supplying the OFW node and the subset of standard properties of its children. Together with the previous change this also allows to fully take advantage of newbus in that drivers like fhc(4), which attach on multiple parent busses, no longer require different bus front-ends as obtaining the OFW node and properties as well as resource allocation works the same for all supported busses. As such this change also is part 4/4 of allowing creator(4) to work in USIII-based machines as it allows this driver to attach on both nexus(4) and upa(4). On the other hand removing these IVARs breaks API compatibility with the powerpc nexus(4) but which isn't that bad as a) sparc64 currently doesn't share any device driver hanging off of nexus(4) with powerpc and b) they were no longer compatible regarding OFW-related extensions at the pci(4) level since quite some time. o Provide bus_get_dma_tag methods in nexus(4) and its children in order to handle DMA tags in a hierarchical way and get rid of the sparc64_root_dma_tag kludge. Together with the previous two items this changes also allows to completely get rid of the nexus(4) IVAR interface. It also includes: - pushing the constraints previously specified by the nexus_dmatag down into the DMA tags of psycho(4) and sbus(4) as it's their IOMMUs which induce these restrictions (and nothing at the nexus(4) or anything that would warrant specifying them there), - fixing some obviously wrong constraints of the psycho(4) and sbus(4) DMA tags, which happened to not actually be used with the sparc64_root_dma_tag kludge in place and therefore didn't cause problems so far, - replacing magic constants for constraints with macros as far as it is obvious as to where they come from. This doesn't include taking advantage of the newbus way to get the parent DMA tags implemented by this change in order to divorce the IOTSBs of the PCI and SBus IOMMUs or for implementing the workaround for the DMA sync bug in Sabre (and Tomatillo) bridges, yet, though. o Get rid of the notion that nexus(4) (mostly) reflects an UPA bus by replacing ofw_upa.h and with ofw_nexus.h (which was repo-copied from ofw_upa.h) and renaming its content, which actually applies to all of Fireplane/Safari, JBus and UPA (in the host bus case), as appropriate. o Just use M_DEVBUF instead of a separate M_NEXUS malloc type for allocating the device info for the children of nexus(4). This is done in order to not need to export M_NEXUS when deriving drivers for subordinate busses from the nexus(4) class. o Use the DEFINE_CLASS_0() macro to declare the nexus(4) driver so we can derive subclasses from it. o Const'ify the nexus_excl_name and nexus_excl_type arrays as well as add 'associations' and 'rsc', which are pseudo-devices without resources and therefore of no real interest for nexus(4), to the former. o Let the nexus(4) device memory rman manage the entire 64-bit address space instead of just the UPA_MEMSTART to UPA_MEMEND subregion as Fireplane/Safari- and JBus-based machines use multiple ranges, which can't be as easily divided as in the case of UPA (limiting the address space only served for sanity checking anyway). o Use M_WAITOK instead of M_NOWAIT when allocating the device info for children of nexus(4) in order to give one less opportunity for adding devices to nexus(4) to fail. o While adapting the drivers affected by the above nexus(4) changes, change them to take advantage of rman_get_rid() instead of caching the RIDs assigned to allocated resources, now that the RIDs of resources are correctly set. o In iommu(4) and nexus(4) replace hard-coded functions names, which actually became outdated in several places, in panic strings and status massages with __func__. [1] o Use driver_filter_t in prototypes where appropriate. o Add my copyright to creator(4), fhc(4), nexus(4), psycho(4) and sbus(4) as I changed considerable amounts of these drivers as well as added a bunch of new features, workarounds for silicon bugs etc. o Fix some white space nits. Due to lack of access to Exx00 hardware, these changes, i.e. central(4) and fhc(4), couldn't be runtime tested on such a machine. Exx00 are currently reported to panic before trying to attach nexus(4) anyway though. PR: 76052 [1] Approved by: re (kensmith) diff 167308 Wed Mar 07 19:13:51 MST 2007 marius Rototill the sparc64 nexus(4) (actually this brings in the code the sun4v nexus(4) in turn is based on): o Change nexus(4) to manage the resources of its children so the respective device drivers don't need to figure them out of OFW themselves. o Change nexus(4) to provide the ofw_bus KOBJ interface instead of using IVARs for supplying the OFW node and the subset of standard properties of its children. Together with the previous change this also allows to fully take advantage of newbus in that drivers like fhc(4), which attach on multiple parent busses, no longer require different bus front-ends as obtaining the OFW node and properties as well as resource allocation works the same for all supported busses. As such this change also is part 4/4 of allowing creator(4) to work in USIII-based machines as it allows this driver to attach on both nexus(4) and upa(4). On the other hand removing these IVARs breaks API compatibility with the powerpc nexus(4) but which isn't that bad as a) sparc64 currently doesn't share any device driver hanging off of nexus(4) with powerpc and b) they were no longer compatible regarding OFW-related extensions at the pci(4) level since quite some time. o Provide bus_get_dma_tag methods in nexus(4) and its children in order to handle DMA tags in a hierarchical way and get rid of the sparc64_root_dma_tag kludge. Together with the previous two items this changes also allows to completely get rid of the nexus(4) IVAR interface. It also includes: - pushing the constraints previously specified by the nexus_dmatag down into the DMA tags of psycho(4) and sbus(4) as it's their IOMMUs which induce these restrictions (and nothing at the nexus(4) or anything that would warrant specifying them there), - fixing some obviously wrong constraints of the psycho(4) and sbus(4) DMA tags, which happened to not actually be used with the sparc64_root_dma_tag kludge in place and therefore didn't cause problems so far, - replacing magic constants for constraints with macros as far as it is obvious as to where they come from. This doesn't include taking advantage of the newbus way to get the parent DMA tags implemented by this change in order to divorce the IOTSBs of the PCI and SBus IOMMUs or for implementing the workaround for the DMA sync bug in Sabre (and Tomatillo) bridges, yet, though. o Get rid of the notion that nexus(4) (mostly) reflects an UPA bus by replacing ofw_upa.h and with ofw_nexus.h (which was repo-copied from ofw_upa.h) and renaming its content, which actually applies to all of Fireplane/Safari, JBus and UPA (in the host bus case), as appropriate. o Just use M_DEVBUF instead of a separate M_NEXUS malloc type for allocating the device info for the children of nexus(4). This is done in order to not need to export M_NEXUS when deriving drivers for subordinate busses from the nexus(4) class. o Use the DEFINE_CLASS_0() macro to declare the nexus(4) driver so we can derive subclasses from it. o Const'ify the nexus_excl_name and nexus_excl_type arrays as well as add 'associations' and 'rsc', which are pseudo-devices without resources and therefore of no real interest for nexus(4), to the former. o Let the nexus(4) device memory rman manage the entire 64-bit address space instead of just the UPA_MEMSTART to UPA_MEMEND subregion as Fireplane/Safari- and JBus-based machines use multiple ranges, which can't be as easily divided as in the case of UPA (limiting the address space only served for sanity checking anyway). o Use M_WAITOK instead of M_NOWAIT when allocating the device info for children of nexus(4) in order to give one less opportunity for adding devices to nexus(4) to fail. o While adapting the drivers affected by the above nexus(4) changes, change them to take advantage of rman_get_rid() instead of caching the RIDs assigned to allocated resources, now that the RIDs of resources are correctly set. o In iommu(4) and nexus(4) replace hard-coded functions names, which actually became outdated in several places, in panic strings and status massages with __func__. [1] o Use driver_filter_t in prototypes where appropriate. o Add my copyright to creator(4), fhc(4), nexus(4), psycho(4) and sbus(4) as I changed considerable amounts of these drivers as well as added a bunch of new features, workarounds for silicon bugs etc. o Fix some white space nits. Due to lack of access to Exx00 hardware, these changes, i.e. central(4) and fhc(4), couldn't be runtime tested on such a machine. Exx00 are currently reported to panic before trying to attach nexus(4) anyway though. PR: 76052 [1] Approved by: re (kensmith) diff 167308 Wed Mar 07 19:13:51 MST 2007 marius Rototill the sparc64 nexus(4) (actually this brings in the code the sun4v nexus(4) in turn is based on): o Change nexus(4) to manage the resources of its children so the respective device drivers don't need to figure them out of OFW themselves. o Change nexus(4) to provide the ofw_bus KOBJ interface instead of using IVARs for supplying the OFW node and the subset of standard properties of its children. Together with the previous change this also allows to fully take advantage of newbus in that drivers like fhc(4), which attach on multiple parent busses, no longer require different bus front-ends as obtaining the OFW node and properties as well as resource allocation works the same for all supported busses. As such this change also is part 4/4 of allowing creator(4) to work in USIII-based machines as it allows this driver to attach on both nexus(4) and upa(4). On the other hand removing these IVARs breaks API compatibility with the powerpc nexus(4) but which isn't that bad as a) sparc64 currently doesn't share any device driver hanging off of nexus(4) with powerpc and b) they were no longer compatible regarding OFW-related extensions at the pci(4) level since quite some time. o Provide bus_get_dma_tag methods in nexus(4) and its children in order to handle DMA tags in a hierarchical way and get rid of the sparc64_root_dma_tag kludge. Together with the previous two items this changes also allows to completely get rid of the nexus(4) IVAR interface. It also includes: - pushing the constraints previously specified by the nexus_dmatag down into the DMA tags of psycho(4) and sbus(4) as it's their IOMMUs which induce these restrictions (and nothing at the nexus(4) or anything that would warrant specifying them there), - fixing some obviously wrong constraints of the psycho(4) and sbus(4) DMA tags, which happened to not actually be used with the sparc64_root_dma_tag kludge in place and therefore didn't cause problems so far, - replacing magic constants for constraints with macros as far as it is obvious as to where they come from. This doesn't include taking advantage of the newbus way to get the parent DMA tags implemented by this change in order to divorce the IOTSBs of the PCI and SBus IOMMUs or for implementing the workaround for the DMA sync bug in Sabre (and Tomatillo) bridges, yet, though. o Get rid of the notion that nexus(4) (mostly) reflects an UPA bus by replacing ofw_upa.h and with ofw_nexus.h (which was repo-copied from ofw_upa.h) and renaming its content, which actually applies to all of Fireplane/Safari, JBus and UPA (in the host bus case), as appropriate. o Just use M_DEVBUF instead of a separate M_NEXUS malloc type for allocating the device info for the children of nexus(4). This is done in order to not need to export M_NEXUS when deriving drivers for subordinate busses from the nexus(4) class. o Use the DEFINE_CLASS_0() macro to declare the nexus(4) driver so we can derive subclasses from it. o Const'ify the nexus_excl_name and nexus_excl_type arrays as well as add 'associations' and 'rsc', which are pseudo-devices without resources and therefore of no real interest for nexus(4), to the former. o Let the nexus(4) device memory rman manage the entire 64-bit address space instead of just the UPA_MEMSTART to UPA_MEMEND subregion as Fireplane/Safari- and JBus-based machines use multiple ranges, which can't be as easily divided as in the case of UPA (limiting the address space only served for sanity checking anyway). o Use M_WAITOK instead of M_NOWAIT when allocating the device info for children of nexus(4) in order to give one less opportunity for adding devices to nexus(4) to fail. o While adapting the drivers affected by the above nexus(4) changes, change them to take advantage of rman_get_rid() instead of caching the RIDs assigned to allocated resources, now that the RIDs of resources are correctly set. o In iommu(4) and nexus(4) replace hard-coded functions names, which actually became outdated in several places, in panic strings and status massages with __func__. [1] o Use driver_filter_t in prototypes where appropriate. o Add my copyright to creator(4), fhc(4), nexus(4), psycho(4) and sbus(4) as I changed considerable amounts of these drivers as well as added a bunch of new features, workarounds for silicon bugs etc. o Fix some white space nits. Due to lack of access to Exx00 hardware, these changes, i.e. central(4) and fhc(4), couldn't be runtime tested on such a machine. Exx00 are currently reported to panic before trying to attach nexus(4) anyway though. PR: 76052 [1] Approved by: re (kensmith) diff 167308 Wed Mar 07 19:13:51 MST 2007 marius Rototill the sparc64 nexus(4) (actually this brings in the code the sun4v nexus(4) in turn is based on): o Change nexus(4) to manage the resources of its children so the respective device drivers don't need to figure them out of OFW themselves. o Change nexus(4) to provide the ofw_bus KOBJ interface instead of using IVARs for supplying the OFW node and the subset of standard properties of its children. Together with the previous change this also allows to fully take advantage of newbus in that drivers like fhc(4), which attach on multiple parent busses, no longer require different bus front-ends as obtaining the OFW node and properties as well as resource allocation works the same for all supported busses. As such this change also is part 4/4 of allowing creator(4) to work in USIII-based machines as it allows this driver to attach on both nexus(4) and upa(4). On the other hand removing these IVARs breaks API compatibility with the powerpc nexus(4) but which isn't that bad as a) sparc64 currently doesn't share any device driver hanging off of nexus(4) with powerpc and b) they were no longer compatible regarding OFW-related extensions at the pci(4) level since quite some time. o Provide bus_get_dma_tag methods in nexus(4) and its children in order to handle DMA tags in a hierarchical way and get rid of the sparc64_root_dma_tag kludge. Together with the previous two items this changes also allows to completely get rid of the nexus(4) IVAR interface. It also includes: - pushing the constraints previously specified by the nexus_dmatag down into the DMA tags of psycho(4) and sbus(4) as it's their IOMMUs which induce these restrictions (and nothing at the nexus(4) or anything that would warrant specifying them there), - fixing some obviously wrong constraints of the psycho(4) and sbus(4) DMA tags, which happened to not actually be used with the sparc64_root_dma_tag kludge in place and therefore didn't cause problems so far, - replacing magic constants for constraints with macros as far as it is obvious as to where they come from. This doesn't include taking advantage of the newbus way to get the parent DMA tags implemented by this change in order to divorce the IOTSBs of the PCI and SBus IOMMUs or for implementing the workaround for the DMA sync bug in Sabre (and Tomatillo) bridges, yet, though. o Get rid of the notion that nexus(4) (mostly) reflects an UPA bus by replacing ofw_upa.h and with ofw_nexus.h (which was repo-copied from ofw_upa.h) and renaming its content, which actually applies to all of Fireplane/Safari, JBus and UPA (in the host bus case), as appropriate. o Just use M_DEVBUF instead of a separate M_NEXUS malloc type for allocating the device info for the children of nexus(4). This is done in order to not need to export M_NEXUS when deriving drivers for subordinate busses from the nexus(4) class. o Use the DEFINE_CLASS_0() macro to declare the nexus(4) driver so we can derive subclasses from it. o Const'ify the nexus_excl_name and nexus_excl_type arrays as well as add 'associations' and 'rsc', which are pseudo-devices without resources and therefore of no real interest for nexus(4), to the former. o Let the nexus(4) device memory rman manage the entire 64-bit address space instead of just the UPA_MEMSTART to UPA_MEMEND subregion as Fireplane/Safari- and JBus-based machines use multiple ranges, which can't be as easily divided as in the case of UPA (limiting the address space only served for sanity checking anyway). o Use M_WAITOK instead of M_NOWAIT when allocating the device info for children of nexus(4) in order to give one less opportunity for adding devices to nexus(4) to fail. o While adapting the drivers affected by the above nexus(4) changes, change them to take advantage of rman_get_rid() instead of caching the RIDs assigned to allocated resources, now that the RIDs of resources are correctly set. o In iommu(4) and nexus(4) replace hard-coded functions names, which actually became outdated in several places, in panic strings and status massages with __func__. [1] o Use driver_filter_t in prototypes where appropriate. o Add my copyright to creator(4), fhc(4), nexus(4), psycho(4) and sbus(4) as I changed considerable amounts of these drivers as well as added a bunch of new features, workarounds for silicon bugs etc. o Fix some white space nits. Due to lack of access to Exx00 hardware, these changes, i.e. central(4) and fhc(4), couldn't be runtime tested on such a machine. Exx00 are currently reported to panic before trying to attach nexus(4) anyway though. PR: 76052 [1] Approved by: re (kensmith) diff 167308 Wed Mar 07 19:13:51 MST 2007 marius Rototill the sparc64 nexus(4) (actually this brings in the code the sun4v nexus(4) in turn is based on): o Change nexus(4) to manage the resources of its children so the respective device drivers don't need to figure them out of OFW themselves. o Change nexus(4) to provide the ofw_bus KOBJ interface instead of using IVARs for supplying the OFW node and the subset of standard properties of its children. Together with the previous change this also allows to fully take advantage of newbus in that drivers like fhc(4), which attach on multiple parent busses, no longer require different bus front-ends as obtaining the OFW node and properties as well as resource allocation works the same for all supported busses. As such this change also is part 4/4 of allowing creator(4) to work in USIII-based machines as it allows this driver to attach on both nexus(4) and upa(4). On the other hand removing these IVARs breaks API compatibility with the powerpc nexus(4) but which isn't that bad as a) sparc64 currently doesn't share any device driver hanging off of nexus(4) with powerpc and b) they were no longer compatible regarding OFW-related extensions at the pci(4) level since quite some time. o Provide bus_get_dma_tag methods in nexus(4) and its children in order to handle DMA tags in a hierarchical way and get rid of the sparc64_root_dma_tag kludge. Together with the previous two items this changes also allows to completely get rid of the nexus(4) IVAR interface. It also includes: - pushing the constraints previously specified by the nexus_dmatag down into the DMA tags of psycho(4) and sbus(4) as it's their IOMMUs which induce these restrictions (and nothing at the nexus(4) or anything that would warrant specifying them there), - fixing some obviously wrong constraints of the psycho(4) and sbus(4) DMA tags, which happened to not actually be used with the sparc64_root_dma_tag kludge in place and therefore didn't cause problems so far, - replacing magic constants for constraints with macros as far as it is obvious as to where they come from. This doesn't include taking advantage of the newbus way to get the parent DMA tags implemented by this change in order to divorce the IOTSBs of the PCI and SBus IOMMUs or for implementing the workaround for the DMA sync bug in Sabre (and Tomatillo) bridges, yet, though. o Get rid of the notion that nexus(4) (mostly) reflects an UPA bus by replacing ofw_upa.h and with ofw_nexus.h (which was repo-copied from ofw_upa.h) and renaming its content, which actually applies to all of Fireplane/Safari, JBus and UPA (in the host bus case), as appropriate. o Just use M_DEVBUF instead of a separate M_NEXUS malloc type for allocating the device info for the children of nexus(4). This is done in order to not need to export M_NEXUS when deriving drivers for subordinate busses from the nexus(4) class. o Use the DEFINE_CLASS_0() macro to declare the nexus(4) driver so we can derive subclasses from it. o Const'ify the nexus_excl_name and nexus_excl_type arrays as well as add 'associations' and 'rsc', which are pseudo-devices without resources and therefore of no real interest for nexus(4), to the former. o Let the nexus(4) device memory rman manage the entire 64-bit address space instead of just the UPA_MEMSTART to UPA_MEMEND subregion as Fireplane/Safari- and JBus-based machines use multiple ranges, which can't be as easily divided as in the case of UPA (limiting the address space only served for sanity checking anyway). o Use M_WAITOK instead of M_NOWAIT when allocating the device info for children of nexus(4) in order to give one less opportunity for adding devices to nexus(4) to fail. o While adapting the drivers affected by the above nexus(4) changes, change them to take advantage of rman_get_rid() instead of caching the RIDs assigned to allocated resources, now that the RIDs of resources are correctly set. o In iommu(4) and nexus(4) replace hard-coded functions names, which actually became outdated in several places, in panic strings and status massages with __func__. [1] o Use driver_filter_t in prototypes where appropriate. o Add my copyright to creator(4), fhc(4), nexus(4), psycho(4) and sbus(4) as I changed considerable amounts of these drivers as well as added a bunch of new features, workarounds for silicon bugs etc. o Fix some white space nits. Due to lack of access to Exx00 hardware, these changes, i.e. central(4) and fhc(4), couldn't be runtime tested on such a machine. Exx00 are currently reported to panic before trying to attach nexus(4) anyway though. PR: 76052 [1] Approved by: re (kensmith) diff 167308 Wed Mar 07 19:13:51 MST 2007 marius Rototill the sparc64 nexus(4) (actually this brings in the code the sun4v nexus(4) in turn is based on): o Change nexus(4) to manage the resources of its children so the respective device drivers don't need to figure them out of OFW themselves. o Change nexus(4) to provide the ofw_bus KOBJ interface instead of using IVARs for supplying the OFW node and the subset of standard properties of its children. Together with the previous change this also allows to fully take advantage of newbus in that drivers like fhc(4), which attach on multiple parent busses, no longer require different bus front-ends as obtaining the OFW node and properties as well as resource allocation works the same for all supported busses. As such this change also is part 4/4 of allowing creator(4) to work in USIII-based machines as it allows this driver to attach on both nexus(4) and upa(4). On the other hand removing these IVARs breaks API compatibility with the powerpc nexus(4) but which isn't that bad as a) sparc64 currently doesn't share any device driver hanging off of nexus(4) with powerpc and b) they were no longer compatible regarding OFW-related extensions at the pci(4) level since quite some time. o Provide bus_get_dma_tag methods in nexus(4) and its children in order to handle DMA tags in a hierarchical way and get rid of the sparc64_root_dma_tag kludge. Together with the previous two items this changes also allows to completely get rid of the nexus(4) IVAR interface. It also includes: - pushing the constraints previously specified by the nexus_dmatag down into the DMA tags of psycho(4) and sbus(4) as it's their IOMMUs which induce these restrictions (and nothing at the nexus(4) or anything that would warrant specifying them there), - fixing some obviously wrong constraints of the psycho(4) and sbus(4) DMA tags, which happened to not actually be used with the sparc64_root_dma_tag kludge in place and therefore didn't cause problems so far, - replacing magic constants for constraints with macros as far as it is obvious as to where they come from. This doesn't include taking advantage of the newbus way to get the parent DMA tags implemented by this change in order to divorce the IOTSBs of the PCI and SBus IOMMUs or for implementing the workaround for the DMA sync bug in Sabre (and Tomatillo) bridges, yet, though. o Get rid of the notion that nexus(4) (mostly) reflects an UPA bus by replacing ofw_upa.h and with ofw_nexus.h (which was repo-copied from ofw_upa.h) and renaming its content, which actually applies to all of Fireplane/Safari, JBus and UPA (in the host bus case), as appropriate. o Just use M_DEVBUF instead of a separate M_NEXUS malloc type for allocating the device info for the children of nexus(4). This is done in order to not need to export M_NEXUS when deriving drivers for subordinate busses from the nexus(4) class. o Use the DEFINE_CLASS_0() macro to declare the nexus(4) driver so we can derive subclasses from it. o Const'ify the nexus_excl_name and nexus_excl_type arrays as well as add 'associations' and 'rsc', which are pseudo-devices without resources and therefore of no real interest for nexus(4), to the former. o Let the nexus(4) device memory rman manage the entire 64-bit address space instead of just the UPA_MEMSTART to UPA_MEMEND subregion as Fireplane/Safari- and JBus-based machines use multiple ranges, which can't be as easily divided as in the case of UPA (limiting the address space only served for sanity checking anyway). o Use M_WAITOK instead of M_NOWAIT when allocating the device info for children of nexus(4) in order to give one less opportunity for adding devices to nexus(4) to fail. o While adapting the drivers affected by the above nexus(4) changes, change them to take advantage of rman_get_rid() instead of caching the RIDs assigned to allocated resources, now that the RIDs of resources are correctly set. o In iommu(4) and nexus(4) replace hard-coded functions names, which actually became outdated in several places, in panic strings and status massages with __func__. [1] o Use driver_filter_t in prototypes where appropriate. o Add my copyright to creator(4), fhc(4), nexus(4), psycho(4) and sbus(4) as I changed considerable amounts of these drivers as well as added a bunch of new features, workarounds for silicon bugs etc. o Fix some white space nits. Due to lack of access to Exx00 hardware, these changes, i.e. central(4) and fhc(4), couldn't be runtime tested on such a machine. Exx00 are currently reported to panic before trying to attach nexus(4) anyway though. PR: 76052 [1] Approved by: re (kensmith) diff 167308 Wed Mar 07 19:13:51 MST 2007 marius Rototill the sparc64 nexus(4) (actually this brings in the code the sun4v nexus(4) in turn is based on): o Change nexus(4) to manage the resources of its children so the respective device drivers don't need to figure them out of OFW themselves. o Change nexus(4) to provide the ofw_bus KOBJ interface instead of using IVARs for supplying the OFW node and the subset of standard properties of its children. Together with the previous change this also allows to fully take advantage of newbus in that drivers like fhc(4), which attach on multiple parent busses, no longer require different bus front-ends as obtaining the OFW node and properties as well as resource allocation works the same for all supported busses. As such this change also is part 4/4 of allowing creator(4) to work in USIII-based machines as it allows this driver to attach on both nexus(4) and upa(4). On the other hand removing these IVARs breaks API compatibility with the powerpc nexus(4) but which isn't that bad as a) sparc64 currently doesn't share any device driver hanging off of nexus(4) with powerpc and b) they were no longer compatible regarding OFW-related extensions at the pci(4) level since quite some time. o Provide bus_get_dma_tag methods in nexus(4) and its children in order to handle DMA tags in a hierarchical way and get rid of the sparc64_root_dma_tag kludge. Together with the previous two items this changes also allows to completely get rid of the nexus(4) IVAR interface. It also includes: - pushing the constraints previously specified by the nexus_dmatag down into the DMA tags of psycho(4) and sbus(4) as it's their IOMMUs which induce these restrictions (and nothing at the nexus(4) or anything that would warrant specifying them there), - fixing some obviously wrong constraints of the psycho(4) and sbus(4) DMA tags, which happened to not actually be used with the sparc64_root_dma_tag kludge in place and therefore didn't cause problems so far, - replacing magic constants for constraints with macros as far as it is obvious as to where they come from. This doesn't include taking advantage of the newbus way to get the parent DMA tags implemented by this change in order to divorce the IOTSBs of the PCI and SBus IOMMUs or for implementing the workaround for the DMA sync bug in Sabre (and Tomatillo) bridges, yet, though. o Get rid of the notion that nexus(4) (mostly) reflects an UPA bus by replacing ofw_upa.h and with ofw_nexus.h (which was repo-copied from ofw_upa.h) and renaming its content, which actually applies to all of Fireplane/Safari, JBus and UPA (in the host bus case), as appropriate. o Just use M_DEVBUF instead of a separate M_NEXUS malloc type for allocating the device info for the children of nexus(4). This is done in order to not need to export M_NEXUS when deriving drivers for subordinate busses from the nexus(4) class. o Use the DEFINE_CLASS_0() macro to declare the nexus(4) driver so we can derive subclasses from it. o Const'ify the nexus_excl_name and nexus_excl_type arrays as well as add 'associations' and 'rsc', which are pseudo-devices without resources and therefore of no real interest for nexus(4), to the former. o Let the nexus(4) device memory rman manage the entire 64-bit address space instead of just the UPA_MEMSTART to UPA_MEMEND subregion as Fireplane/Safari- and JBus-based machines use multiple ranges, which can't be as easily divided as in the case of UPA (limiting the address space only served for sanity checking anyway). o Use M_WAITOK instead of M_NOWAIT when allocating the device info for children of nexus(4) in order to give one less opportunity for adding devices to nexus(4) to fail. o While adapting the drivers affected by the above nexus(4) changes, change them to take advantage of rman_get_rid() instead of caching the RIDs assigned to allocated resources, now that the RIDs of resources are correctly set. o In iommu(4) and nexus(4) replace hard-coded functions names, which actually became outdated in several places, in panic strings and status massages with __func__. [1] o Use driver_filter_t in prototypes where appropriate. o Add my copyright to creator(4), fhc(4), nexus(4), psycho(4) and sbus(4) as I changed considerable amounts of these drivers as well as added a bunch of new features, workarounds for silicon bugs etc. o Fix some white space nits. Due to lack of access to Exx00 hardware, these changes, i.e. central(4) and fhc(4), couldn't be runtime tested on such a machine. Exx00 are currently reported to panic before trying to attach nexus(4) anyway though. PR: 76052 [1] Approved by: re (kensmith) diff 167308 Wed Mar 07 19:13:51 MST 2007 marius Rototill the sparc64 nexus(4) (actually this brings in the code the sun4v nexus(4) in turn is based on): o Change nexus(4) to manage the resources of its children so the respective device drivers don't need to figure them out of OFW themselves. o Change nexus(4) to provide the ofw_bus KOBJ interface instead of using IVARs for supplying the OFW node and the subset of standard properties of its children. Together with the previous change this also allows to fully take advantage of newbus in that drivers like fhc(4), which attach on multiple parent busses, no longer require different bus front-ends as obtaining the OFW node and properties as well as resource allocation works the same for all supported busses. As such this change also is part 4/4 of allowing creator(4) to work in USIII-based machines as it allows this driver to attach on both nexus(4) and upa(4). On the other hand removing these IVARs breaks API compatibility with the powerpc nexus(4) but which isn't that bad as a) sparc64 currently doesn't share any device driver hanging off of nexus(4) with powerpc and b) they were no longer compatible regarding OFW-related extensions at the pci(4) level since quite some time. o Provide bus_get_dma_tag methods in nexus(4) and its children in order to handle DMA tags in a hierarchical way and get rid of the sparc64_root_dma_tag kludge. Together with the previous two items this changes also allows to completely get rid of the nexus(4) IVAR interface. It also includes: - pushing the constraints previously specified by the nexus_dmatag down into the DMA tags of psycho(4) and sbus(4) as it's their IOMMUs which induce these restrictions (and nothing at the nexus(4) or anything that would warrant specifying them there), - fixing some obviously wrong constraints of the psycho(4) and sbus(4) DMA tags, which happened to not actually be used with the sparc64_root_dma_tag kludge in place and therefore didn't cause problems so far, - replacing magic constants for constraints with macros as far as it is obvious as to where they come from. This doesn't include taking advantage of the newbus way to get the parent DMA tags implemented by this change in order to divorce the IOTSBs of the PCI and SBus IOMMUs or for implementing the workaround for the DMA sync bug in Sabre (and Tomatillo) bridges, yet, though. o Get rid of the notion that nexus(4) (mostly) reflects an UPA bus by replacing ofw_upa.h and with ofw_nexus.h (which was repo-copied from ofw_upa.h) and renaming its content, which actually applies to all of Fireplane/Safari, JBus and UPA (in the host bus case), as appropriate. o Just use M_DEVBUF instead of a separate M_NEXUS malloc type for allocating the device info for the children of nexus(4). This is done in order to not need to export M_NEXUS when deriving drivers for subordinate busses from the nexus(4) class. o Use the DEFINE_CLASS_0() macro to declare the nexus(4) driver so we can derive subclasses from it. o Const'ify the nexus_excl_name and nexus_excl_type arrays as well as add 'associations' and 'rsc', which are pseudo-devices without resources and therefore of no real interest for nexus(4), to the former. o Let the nexus(4) device memory rman manage the entire 64-bit address space instead of just the UPA_MEMSTART to UPA_MEMEND subregion as Fireplane/Safari- and JBus-based machines use multiple ranges, which can't be as easily divided as in the case of UPA (limiting the address space only served for sanity checking anyway). o Use M_WAITOK instead of M_NOWAIT when allocating the device info for children of nexus(4) in order to give one less opportunity for adding devices to nexus(4) to fail. o While adapting the drivers affected by the above nexus(4) changes, change them to take advantage of rman_get_rid() instead of caching the RIDs assigned to allocated resources, now that the RIDs of resources are correctly set. o In iommu(4) and nexus(4) replace hard-coded functions names, which actually became outdated in several places, in panic strings and status massages with __func__. [1] o Use driver_filter_t in prototypes where appropriate. o Add my copyright to creator(4), fhc(4), nexus(4), psycho(4) and sbus(4) as I changed considerable amounts of these drivers as well as added a bunch of new features, workarounds for silicon bugs etc. o Fix some white space nits. Due to lack of access to Exx00 hardware, these changes, i.e. central(4) and fhc(4), couldn't be runtime tested on such a machine. Exx00 are currently reported to panic before trying to attach nexus(4) anyway though. PR: 76052 [1] Approved by: re (kensmith) diff 167308 Wed Mar 07 19:13:51 MST 2007 marius Rototill the sparc64 nexus(4) (actually this brings in the code the sun4v nexus(4) in turn is based on): o Change nexus(4) to manage the resources of its children so the respective device drivers don't need to figure them out of OFW themselves. o Change nexus(4) to provide the ofw_bus KOBJ interface instead of using IVARs for supplying the OFW node and the subset of standard properties of its children. Together with the previous change this also allows to fully take advantage of newbus in that drivers like fhc(4), which attach on multiple parent busses, no longer require different bus front-ends as obtaining the OFW node and properties as well as resource allocation works the same for all supported busses. As such this change also is part 4/4 of allowing creator(4) to work in USIII-based machines as it allows this driver to attach on both nexus(4) and upa(4). On the other hand removing these IVARs breaks API compatibility with the powerpc nexus(4) but which isn't that bad as a) sparc64 currently doesn't share any device driver hanging off of nexus(4) with powerpc and b) they were no longer compatible regarding OFW-related extensions at the pci(4) level since quite some time. o Provide bus_get_dma_tag methods in nexus(4) and its children in order to handle DMA tags in a hierarchical way and get rid of the sparc64_root_dma_tag kludge. Together with the previous two items this changes also allows to completely get rid of the nexus(4) IVAR interface. It also includes: - pushing the constraints previously specified by the nexus_dmatag down into the DMA tags of psycho(4) and sbus(4) as it's their IOMMUs which induce these restrictions (and nothing at the nexus(4) or anything that would warrant specifying them there), - fixing some obviously wrong constraints of the psycho(4) and sbus(4) DMA tags, which happened to not actually be used with the sparc64_root_dma_tag kludge in place and therefore didn't cause problems so far, - replacing magic constants for constraints with macros as far as it is obvious as to where they come from. This doesn't include taking advantage of the newbus way to get the parent DMA tags implemented by this change in order to divorce the IOTSBs of the PCI and SBus IOMMUs or for implementing the workaround for the DMA sync bug in Sabre (and Tomatillo) bridges, yet, though. o Get rid of the notion that nexus(4) (mostly) reflects an UPA bus by replacing ofw_upa.h and with ofw_nexus.h (which was repo-copied from ofw_upa.h) and renaming its content, which actually applies to all of Fireplane/Safari, JBus and UPA (in the host bus case), as appropriate. o Just use M_DEVBUF instead of a separate M_NEXUS malloc type for allocating the device info for the children of nexus(4). This is done in order to not need to export M_NEXUS when deriving drivers for subordinate busses from the nexus(4) class. o Use the DEFINE_CLASS_0() macro to declare the nexus(4) driver so we can derive subclasses from it. o Const'ify the nexus_excl_name and nexus_excl_type arrays as well as add 'associations' and 'rsc', which are pseudo-devices without resources and therefore of no real interest for nexus(4), to the former. o Let the nexus(4) device memory rman manage the entire 64-bit address space instead of just the UPA_MEMSTART to UPA_MEMEND subregion as Fireplane/Safari- and JBus-based machines use multiple ranges, which can't be as easily divided as in the case of UPA (limiting the address space only served for sanity checking anyway). o Use M_WAITOK instead of M_NOWAIT when allocating the device info for children of nexus(4) in order to give one less opportunity for adding devices to nexus(4) to fail. o While adapting the drivers affected by the above nexus(4) changes, change them to take advantage of rman_get_rid() instead of caching the RIDs assigned to allocated resources, now that the RIDs of resources are correctly set. o In iommu(4) and nexus(4) replace hard-coded functions names, which actually became outdated in several places, in panic strings and status massages with __func__. [1] o Use driver_filter_t in prototypes where appropriate. o Add my copyright to creator(4), fhc(4), nexus(4), psycho(4) and sbus(4) as I changed considerable amounts of these drivers as well as added a bunch of new features, workarounds for silicon bugs etc. o Fix some white space nits. Due to lack of access to Exx00 hardware, these changes, i.e. central(4) and fhc(4), couldn't be runtime tested on such a machine. Exx00 are currently reported to panic before trying to attach nexus(4) anyway though. PR: 76052 [1] Approved by: re (kensmith) diff 167308 Wed Mar 07 19:13:51 MST 2007 marius Rototill the sparc64 nexus(4) (actually this brings in the code the sun4v nexus(4) in turn is based on): o Change nexus(4) to manage the resources of its children so the respective device drivers don't need to figure them out of OFW themselves. o Change nexus(4) to provide the ofw_bus KOBJ interface instead of using IVARs for supplying the OFW node and the subset of standard properties of its children. Together with the previous change this also allows to fully take advantage of newbus in that drivers like fhc(4), which attach on multiple parent busses, no longer require different bus front-ends as obtaining the OFW node and properties as well as resource allocation works the same for all supported busses. As such this change also is part 4/4 of allowing creator(4) to work in USIII-based machines as it allows this driver to attach on both nexus(4) and upa(4). On the other hand removing these IVARs breaks API compatibility with the powerpc nexus(4) but which isn't that bad as a) sparc64 currently doesn't share any device driver hanging off of nexus(4) with powerpc and b) they were no longer compatible regarding OFW-related extensions at the pci(4) level since quite some time. o Provide bus_get_dma_tag methods in nexus(4) and its children in order to handle DMA tags in a hierarchical way and get rid of the sparc64_root_dma_tag kludge. Together with the previous two items this changes also allows to completely get rid of the nexus(4) IVAR interface. It also includes: - pushing the constraints previously specified by the nexus_dmatag down into the DMA tags of psycho(4) and sbus(4) as it's their IOMMUs which induce these restrictions (and nothing at the nexus(4) or anything that would warrant specifying them there), - fixing some obviously wrong constraints of the psycho(4) and sbus(4) DMA tags, which happened to not actually be used with the sparc64_root_dma_tag kludge in place and therefore didn't cause problems so far, - replacing magic constants for constraints with macros as far as it is obvious as to where they come from. This doesn't include taking advantage of the newbus way to get the parent DMA tags implemented by this change in order to divorce the IOTSBs of the PCI and SBus IOMMUs or for implementing the workaround for the DMA sync bug in Sabre (and Tomatillo) bridges, yet, though. o Get rid of the notion that nexus(4) (mostly) reflects an UPA bus by replacing ofw_upa.h and with ofw_nexus.h (which was repo-copied from ofw_upa.h) and renaming its content, which actually applies to all of Fireplane/Safari, JBus and UPA (in the host bus case), as appropriate. o Just use M_DEVBUF instead of a separate M_NEXUS malloc type for allocating the device info for the children of nexus(4). This is done in order to not need to export M_NEXUS when deriving drivers for subordinate busses from the nexus(4) class. o Use the DEFINE_CLASS_0() macro to declare the nexus(4) driver so we can derive subclasses from it. o Const'ify the nexus_excl_name and nexus_excl_type arrays as well as add 'associations' and 'rsc', which are pseudo-devices without resources and therefore of no real interest for nexus(4), to the former. o Let the nexus(4) device memory rman manage the entire 64-bit address space instead of just the UPA_MEMSTART to UPA_MEMEND subregion as Fireplane/Safari- and JBus-based machines use multiple ranges, which can't be as easily divided as in the case of UPA (limiting the address space only served for sanity checking anyway). o Use M_WAITOK instead of M_NOWAIT when allocating the device info for children of nexus(4) in order to give one less opportunity for adding devices to nexus(4) to fail. o While adapting the drivers affected by the above nexus(4) changes, change them to take advantage of rman_get_rid() instead of caching the RIDs assigned to allocated resources, now that the RIDs of resources are correctly set. o In iommu(4) and nexus(4) replace hard-coded functions names, which actually became outdated in several places, in panic strings and status massages with __func__. [1] o Use driver_filter_t in prototypes where appropriate. o Add my copyright to creator(4), fhc(4), nexus(4), psycho(4) and sbus(4) as I changed considerable amounts of these drivers as well as added a bunch of new features, workarounds for silicon bugs etc. o Fix some white space nits. Due to lack of access to Exx00 hardware, these changes, i.e. central(4) and fhc(4), couldn't be runtime tested on such a machine. Exx00 are currently reported to panic before trying to attach nexus(4) anyway though. PR: 76052 [1] Approved by: re (kensmith) diff 167308 Wed Mar 07 19:13:51 MST 2007 marius Rototill the sparc64 nexus(4) (actually this brings in the code the sun4v nexus(4) in turn is based on): o Change nexus(4) to manage the resources of its children so the respective device drivers don't need to figure them out of OFW themselves. o Change nexus(4) to provide the ofw_bus KOBJ interface instead of using IVARs for supplying the OFW node and the subset of standard properties of its children. Together with the previous change this also allows to fully take advantage of newbus in that drivers like fhc(4), which attach on multiple parent busses, no longer require different bus front-ends as obtaining the OFW node and properties as well as resource allocation works the same for all supported busses. As such this change also is part 4/4 of allowing creator(4) to work in USIII-based machines as it allows this driver to attach on both nexus(4) and upa(4). On the other hand removing these IVARs breaks API compatibility with the powerpc nexus(4) but which isn't that bad as a) sparc64 currently doesn't share any device driver hanging off of nexus(4) with powerpc and b) they were no longer compatible regarding OFW-related extensions at the pci(4) level since quite some time. o Provide bus_get_dma_tag methods in nexus(4) and its children in order to handle DMA tags in a hierarchical way and get rid of the sparc64_root_dma_tag kludge. Together with the previous two items this changes also allows to completely get rid of the nexus(4) IVAR interface. It also includes: - pushing the constraints previously specified by the nexus_dmatag down into the DMA tags of psycho(4) and sbus(4) as it's their IOMMUs which induce these restrictions (and nothing at the nexus(4) or anything that would warrant specifying them there), - fixing some obviously wrong constraints of the psycho(4) and sbus(4) DMA tags, which happened to not actually be used with the sparc64_root_dma_tag kludge in place and therefore didn't cause problems so far, - replacing magic constants for constraints with macros as far as it is obvious as to where they come from. This doesn't include taking advantage of the newbus way to get the parent DMA tags implemented by this change in order to divorce the IOTSBs of the PCI and SBus IOMMUs or for implementing the workaround for the DMA sync bug in Sabre (and Tomatillo) bridges, yet, though. o Get rid of the notion that nexus(4) (mostly) reflects an UPA bus by replacing ofw_upa.h and with ofw_nexus.h (which was repo-copied from ofw_upa.h) and renaming its content, which actually applies to all of Fireplane/Safari, JBus and UPA (in the host bus case), as appropriate. o Just use M_DEVBUF instead of a separate M_NEXUS malloc type for allocating the device info for the children of nexus(4). This is done in order to not need to export M_NEXUS when deriving drivers for subordinate busses from the nexus(4) class. o Use the DEFINE_CLASS_0() macro to declare the nexus(4) driver so we can derive subclasses from it. o Const'ify the nexus_excl_name and nexus_excl_type arrays as well as add 'associations' and 'rsc', which are pseudo-devices without resources and therefore of no real interest for nexus(4), to the former. o Let the nexus(4) device memory rman manage the entire 64-bit address space instead of just the UPA_MEMSTART to UPA_MEMEND subregion as Fireplane/Safari- and JBus-based machines use multiple ranges, which can't be as easily divided as in the case of UPA (limiting the address space only served for sanity checking anyway). o Use M_WAITOK instead of M_NOWAIT when allocating the device info for children of nexus(4) in order to give one less opportunity for adding devices to nexus(4) to fail. o While adapting the drivers affected by the above nexus(4) changes, change them to take advantage of rman_get_rid() instead of caching the RIDs assigned to allocated resources, now that the RIDs of resources are correctly set. o In iommu(4) and nexus(4) replace hard-coded functions names, which actually became outdated in several places, in panic strings and status massages with __func__. [1] o Use driver_filter_t in prototypes where appropriate. o Add my copyright to creator(4), fhc(4), nexus(4), psycho(4) and sbus(4) as I changed considerable amounts of these drivers as well as added a bunch of new features, workarounds for silicon bugs etc. o Fix some white space nits. Due to lack of access to Exx00 hardware, these changes, i.e. central(4) and fhc(4), couldn't be runtime tested on such a machine. Exx00 are currently reported to panic before trying to attach nexus(4) anyway though. PR: 76052 [1] Approved by: re (kensmith) diff 167308 Wed Mar 07 19:13:51 MST 2007 marius Rototill the sparc64 nexus(4) (actually this brings in the code the sun4v nexus(4) in turn is based on): o Change nexus(4) to manage the resources of its children so the respective device drivers don't need to figure them out of OFW themselves. o Change nexus(4) to provide the ofw_bus KOBJ interface instead of using IVARs for supplying the OFW node and the subset of standard properties of its children. Together with the previous change this also allows to fully take advantage of newbus in that drivers like fhc(4), which attach on multiple parent busses, no longer require different bus front-ends as obtaining the OFW node and properties as well as resource allocation works the same for all supported busses. As such this change also is part 4/4 of allowing creator(4) to work in USIII-based machines as it allows this driver to attach on both nexus(4) and upa(4). On the other hand removing these IVARs breaks API compatibility with the powerpc nexus(4) but which isn't that bad as a) sparc64 currently doesn't share any device driver hanging off of nexus(4) with powerpc and b) they were no longer compatible regarding OFW-related extensions at the pci(4) level since quite some time. o Provide bus_get_dma_tag methods in nexus(4) and its children in order to handle DMA tags in a hierarchical way and get rid of the sparc64_root_dma_tag kludge. Together with the previous two items this changes also allows to completely get rid of the nexus(4) IVAR interface. It also includes: - pushing the constraints previously specified by the nexus_dmatag down into the DMA tags of psycho(4) and sbus(4) as it's their IOMMUs which induce these restrictions (and nothing at the nexus(4) or anything that would warrant specifying them there), - fixing some obviously wrong constraints of the psycho(4) and sbus(4) DMA tags, which happened to not actually be used with the sparc64_root_dma_tag kludge in place and therefore didn't cause problems so far, - replacing magic constants for constraints with macros as far as it is obvious as to where they come from. This doesn't include taking advantage of the newbus way to get the parent DMA tags implemented by this change in order to divorce the IOTSBs of the PCI and SBus IOMMUs or for implementing the workaround for the DMA sync bug in Sabre (and Tomatillo) bridges, yet, though. o Get rid of the notion that nexus(4) (mostly) reflects an UPA bus by replacing ofw_upa.h and with ofw_nexus.h (which was repo-copied from ofw_upa.h) and renaming its content, which actually applies to all of Fireplane/Safari, JBus and UPA (in the host bus case), as appropriate. o Just use M_DEVBUF instead of a separate M_NEXUS malloc type for allocating the device info for the children of nexus(4). This is done in order to not need to export M_NEXUS when deriving drivers for subordinate busses from the nexus(4) class. o Use the DEFINE_CLASS_0() macro to declare the nexus(4) driver so we can derive subclasses from it. o Const'ify the nexus_excl_name and nexus_excl_type arrays as well as add 'associations' and 'rsc', which are pseudo-devices without resources and therefore of no real interest for nexus(4), to the former. o Let the nexus(4) device memory rman manage the entire 64-bit address space instead of just the UPA_MEMSTART to UPA_MEMEND subregion as Fireplane/Safari- and JBus-based machines use multiple ranges, which can't be as easily divided as in the case of UPA (limiting the address space only served for sanity checking anyway). o Use M_WAITOK instead of M_NOWAIT when allocating the device info for children of nexus(4) in order to give one less opportunity for adding devices to nexus(4) to fail. o While adapting the drivers affected by the above nexus(4) changes, change them to take advantage of rman_get_rid() instead of caching the RIDs assigned to allocated resources, now that the RIDs of resources are correctly set. o In iommu(4) and nexus(4) replace hard-coded functions names, which actually became outdated in several places, in panic strings and status massages with __func__. [1] o Use driver_filter_t in prototypes where appropriate. o Add my copyright to creator(4), fhc(4), nexus(4), psycho(4) and sbus(4) as I changed considerable amounts of these drivers as well as added a bunch of new features, workarounds for silicon bugs etc. o Fix some white space nits. Due to lack of access to Exx00 hardware, these changes, i.e. central(4) and fhc(4), couldn't be runtime tested on such a machine. Exx00 are currently reported to panic before trying to attach nexus(4) anyway though. PR: 76052 [1] Approved by: re (kensmith) diff 167308 Wed Mar 07 19:13:51 MST 2007 marius Rototill the sparc64 nexus(4) (actually this brings in the code the sun4v nexus(4) in turn is based on): o Change nexus(4) to manage the resources of its children so the respective device drivers don't need to figure them out of OFW themselves. o Change nexus(4) to provide the ofw_bus KOBJ interface instead of using IVARs for supplying the OFW node and the subset of standard properties of its children. Together with the previous change this also allows to fully take advantage of newbus in that drivers like fhc(4), which attach on multiple parent busses, no longer require different bus front-ends as obtaining the OFW node and properties as well as resource allocation works the same for all supported busses. As such this change also is part 4/4 of allowing creator(4) to work in USIII-based machines as it allows this driver to attach on both nexus(4) and upa(4). On the other hand removing these IVARs breaks API compatibility with the powerpc nexus(4) but which isn't that bad as a) sparc64 currently doesn't share any device driver hanging off of nexus(4) with powerpc and b) they were no longer compatible regarding OFW-related extensions at the pci(4) level since quite some time. o Provide bus_get_dma_tag methods in nexus(4) and its children in order to handle DMA tags in a hierarchical way and get rid of the sparc64_root_dma_tag kludge. Together with the previous two items this changes also allows to completely get rid of the nexus(4) IVAR interface. It also includes: - pushing the constraints previously specified by the nexus_dmatag down into the DMA tags of psycho(4) and sbus(4) as it's their IOMMUs which induce these restrictions (and nothing at the nexus(4) or anything that would warrant specifying them there), - fixing some obviously wrong constraints of the psycho(4) and sbus(4) DMA tags, which happened to not actually be used with the sparc64_root_dma_tag kludge in place and therefore didn't cause problems so far, - replacing magic constants for constraints with macros as far as it is obvious as to where they come from. This doesn't include taking advantage of the newbus way to get the parent DMA tags implemented by this change in order to divorce the IOTSBs of the PCI and SBus IOMMUs or for implementing the workaround for the DMA sync bug in Sabre (and Tomatillo) bridges, yet, though. o Get rid of the notion that nexus(4) (mostly) reflects an UPA bus by replacing ofw_upa.h and with ofw_nexus.h (which was repo-copied from ofw_upa.h) and renaming its content, which actually applies to all of Fireplane/Safari, JBus and UPA (in the host bus case), as appropriate. o Just use M_DEVBUF instead of a separate M_NEXUS malloc type for allocating the device info for the children of nexus(4). This is done in order to not need to export M_NEXUS when deriving drivers for subordinate busses from the nexus(4) class. o Use the DEFINE_CLASS_0() macro to declare the nexus(4) driver so we can derive subclasses from it. o Const'ify the nexus_excl_name and nexus_excl_type arrays as well as add 'associations' and 'rsc', which are pseudo-devices without resources and therefore of no real interest for nexus(4), to the former. o Let the nexus(4) device memory rman manage the entire 64-bit address space instead of just the UPA_MEMSTART to UPA_MEMEND subregion as Fireplane/Safari- and JBus-based machines use multiple ranges, which can't be as easily divided as in the case of UPA (limiting the address space only served for sanity checking anyway). o Use M_WAITOK instead of M_NOWAIT when allocating the device info for children of nexus(4) in order to give one less opportunity for adding devices to nexus(4) to fail. o While adapting the drivers affected by the above nexus(4) changes, change them to take advantage of rman_get_rid() instead of caching the RIDs assigned to allocated resources, now that the RIDs of resources are correctly set. o In iommu(4) and nexus(4) replace hard-coded functions names, which actually became outdated in several places, in panic strings and status massages with __func__. [1] o Use driver_filter_t in prototypes where appropriate. o Add my copyright to creator(4), fhc(4), nexus(4), psycho(4) and sbus(4) as I changed considerable amounts of these drivers as well as added a bunch of new features, workarounds for silicon bugs etc. o Fix some white space nits. Due to lack of access to Exx00 hardware, these changes, i.e. central(4) and fhc(4), couldn't be runtime tested on such a machine. Exx00 are currently reported to panic before trying to attach nexus(4) anyway though. PR: 76052 [1] Approved by: re (kensmith) diff 167308 Wed Mar 07 19:13:51 MST 2007 marius Rototill the sparc64 nexus(4) (actually this brings in the code the sun4v nexus(4) in turn is based on): o Change nexus(4) to manage the resources of its children so the respective device drivers don't need to figure them out of OFW themselves. o Change nexus(4) to provide the ofw_bus KOBJ interface instead of using IVARs for supplying the OFW node and the subset of standard properties of its children. Together with the previous change this also allows to fully take advantage of newbus in that drivers like fhc(4), which attach on multiple parent busses, no longer require different bus front-ends as obtaining the OFW node and properties as well as resource allocation works the same for all supported busses. As such this change also is part 4/4 of allowing creator(4) to work in USIII-based machines as it allows this driver to attach on both nexus(4) and upa(4). On the other hand removing these IVARs breaks API compatibility with the powerpc nexus(4) but which isn't that bad as a) sparc64 currently doesn't share any device driver hanging off of nexus(4) with powerpc and b) they were no longer compatible regarding OFW-related extensions at the pci(4) level since quite some time. o Provide bus_get_dma_tag methods in nexus(4) and its children in order to handle DMA tags in a hierarchical way and get rid of the sparc64_root_dma_tag kludge. Together with the previous two items this changes also allows to completely get rid of the nexus(4) IVAR interface. It also includes: - pushing the constraints previously specified by the nexus_dmatag down into the DMA tags of psycho(4) and sbus(4) as it's their IOMMUs which induce these restrictions (and nothing at the nexus(4) or anything that would warrant specifying them there), - fixing some obviously wrong constraints of the psycho(4) and sbus(4) DMA tags, which happened to not actually be used with the sparc64_root_dma_tag kludge in place and therefore didn't cause problems so far, - replacing magic constants for constraints with macros as far as it is obvious as to where they come from. This doesn't include taking advantage of the newbus way to get the parent DMA tags implemented by this change in order to divorce the IOTSBs of the PCI and SBus IOMMUs or for implementing the workaround for the DMA sync bug in Sabre (and Tomatillo) bridges, yet, though. o Get rid of the notion that nexus(4) (mostly) reflects an UPA bus by replacing ofw_upa.h and with ofw_nexus.h (which was repo-copied from ofw_upa.h) and renaming its content, which actually applies to all of Fireplane/Safari, JBus and UPA (in the host bus case), as appropriate. o Just use M_DEVBUF instead of a separate M_NEXUS malloc type for allocating the device info for the children of nexus(4). This is done in order to not need to export M_NEXUS when deriving drivers for subordinate busses from the nexus(4) class. o Use the DEFINE_CLASS_0() macro to declare the nexus(4) driver so we can derive subclasses from it. o Const'ify the nexus_excl_name and nexus_excl_type arrays as well as add 'associations' and 'rsc', which are pseudo-devices without resources and therefore of no real interest for nexus(4), to the former. o Let the nexus(4) device memory rman manage the entire 64-bit address space instead of just the UPA_MEMSTART to UPA_MEMEND subregion as Fireplane/Safari- and JBus-based machines use multiple ranges, which can't be as easily divided as in the case of UPA (limiting the address space only served for sanity checking anyway). o Use M_WAITOK instead of M_NOWAIT when allocating the device info for children of nexus(4) in order to give one less opportunity for adding devices to nexus(4) to fail. o While adapting the drivers affected by the above nexus(4) changes, change them to take advantage of rman_get_rid() instead of caching the RIDs assigned to allocated resources, now that the RIDs of resources are correctly set. o In iommu(4) and nexus(4) replace hard-coded functions names, which actually became outdated in several places, in panic strings and status massages with __func__. [1] o Use driver_filter_t in prototypes where appropriate. o Add my copyright to creator(4), fhc(4), nexus(4), psycho(4) and sbus(4) as I changed considerable amounts of these drivers as well as added a bunch of new features, workarounds for silicon bugs etc. o Fix some white space nits. Due to lack of access to Exx00 hardware, these changes, i.e. central(4) and fhc(4), couldn't be runtime tested on such a machine. Exx00 are currently reported to panic before trying to attach nexus(4) anyway though. PR: 76052 [1] Approved by: re (kensmith) diff 167308 Wed Mar 07 19:13:51 MST 2007 marius Rototill the sparc64 nexus(4) (actually this brings in the code the sun4v nexus(4) in turn is based on): o Change nexus(4) to manage the resources of its children so the respective device drivers don't need to figure them out of OFW themselves. o Change nexus(4) to provide the ofw_bus KOBJ interface instead of using IVARs for supplying the OFW node and the subset of standard properties of its children. Together with the previous change this also allows to fully take advantage of newbus in that drivers like fhc(4), which attach on multiple parent busses, no longer require different bus front-ends as obtaining the OFW node and properties as well as resource allocation works the same for all supported busses. As such this change also is part 4/4 of allowing creator(4) to work in USIII-based machines as it allows this driver to attach on both nexus(4) and upa(4). On the other hand removing these IVARs breaks API compatibility with the powerpc nexus(4) but which isn't that bad as a) sparc64 currently doesn't share any device driver hanging off of nexus(4) with powerpc and b) they were no longer compatible regarding OFW-related extensions at the pci(4) level since quite some time. o Provide bus_get_dma_tag methods in nexus(4) and its children in order to handle DMA tags in a hierarchical way and get rid of the sparc64_root_dma_tag kludge. Together with the previous two items this changes also allows to completely get rid of the nexus(4) IVAR interface. It also includes: - pushing the constraints previously specified by the nexus_dmatag down into the DMA tags of psycho(4) and sbus(4) as it's their IOMMUs which induce these restrictions (and nothing at the nexus(4) or anything that would warrant specifying them there), - fixing some obviously wrong constraints of the psycho(4) and sbus(4) DMA tags, which happened to not actually be used with the sparc64_root_dma_tag kludge in place and therefore didn't cause problems so far, - replacing magic constants for constraints with macros as far as it is obvious as to where they come from. This doesn't include taking advantage of the newbus way to get the parent DMA tags implemented by this change in order to divorce the IOTSBs of the PCI and SBus IOMMUs or for implementing the workaround for the DMA sync bug in Sabre (and Tomatillo) bridges, yet, though. o Get rid of the notion that nexus(4) (mostly) reflects an UPA bus by replacing ofw_upa.h and with ofw_nexus.h (which was repo-copied from ofw_upa.h) and renaming its content, which actually applies to all of Fireplane/Safari, JBus and UPA (in the host bus case), as appropriate. o Just use M_DEVBUF instead of a separate M_NEXUS malloc type for allocating the device info for the children of nexus(4). This is done in order to not need to export M_NEXUS when deriving drivers for subordinate busses from the nexus(4) class. o Use the DEFINE_CLASS_0() macro to declare the nexus(4) driver so we can derive subclasses from it. o Const'ify the nexus_excl_name and nexus_excl_type arrays as well as add 'associations' and 'rsc', which are pseudo-devices without resources and therefore of no real interest for nexus(4), to the former. o Let the nexus(4) device memory rman manage the entire 64-bit address space instead of just the UPA_MEMSTART to UPA_MEMEND subregion as Fireplane/Safari- and JBus-based machines use multiple ranges, which can't be as easily divided as in the case of UPA (limiting the address space only served for sanity checking anyway). o Use M_WAITOK instead of M_NOWAIT when allocating the device info for children of nexus(4) in order to give one less opportunity for adding devices to nexus(4) to fail. o While adapting the drivers affected by the above nexus(4) changes, change them to take advantage of rman_get_rid() instead of caching the RIDs assigned to allocated resources, now that the RIDs of resources are correctly set. o In iommu(4) and nexus(4) replace hard-coded functions names, which actually became outdated in several places, in panic strings and status massages with __func__. [1] o Use driver_filter_t in prototypes where appropriate. o Add my copyright to creator(4), fhc(4), nexus(4), psycho(4) and sbus(4) as I changed considerable amounts of these drivers as well as added a bunch of new features, workarounds for silicon bugs etc. o Fix some white space nits. Due to lack of access to Exx00 hardware, these changes, i.e. central(4) and fhc(4), couldn't be runtime tested on such a machine. Exx00 are currently reported to panic before trying to attach nexus(4) anyway though. PR: 76052 [1] Approved by: re (kensmith) diff 167308 Wed Mar 07 19:13:51 MST 2007 marius Rototill the sparc64 nexus(4) (actually this brings in the code the sun4v nexus(4) in turn is based on): o Change nexus(4) to manage the resources of its children so the respective device drivers don't need to figure them out of OFW themselves. o Change nexus(4) to provide the ofw_bus KOBJ interface instead of using IVARs for supplying the OFW node and the subset of standard properties of its children. Together with the previous change this also allows to fully take advantage of newbus in that drivers like fhc(4), which attach on multiple parent busses, no longer require different bus front-ends as obtaining the OFW node and properties as well as resource allocation works the same for all supported busses. As such this change also is part 4/4 of allowing creator(4) to work in USIII-based machines as it allows this driver to attach on both nexus(4) and upa(4). On the other hand removing these IVARs breaks API compatibility with the powerpc nexus(4) but which isn't that bad as a) sparc64 currently doesn't share any device driver hanging off of nexus(4) with powerpc and b) they were no longer compatible regarding OFW-related extensions at the pci(4) level since quite some time. o Provide bus_get_dma_tag methods in nexus(4) and its children in order to handle DMA tags in a hierarchical way and get rid of the sparc64_root_dma_tag kludge. Together with the previous two items this changes also allows to completely get rid of the nexus(4) IVAR interface. It also includes: - pushing the constraints previously specified by the nexus_dmatag down into the DMA tags of psycho(4) and sbus(4) as it's their IOMMUs which induce these restrictions (and nothing at the nexus(4) or anything that would warrant specifying them there), - fixing some obviously wrong constraints of the psycho(4) and sbus(4) DMA tags, which happened to not actually be used with the sparc64_root_dma_tag kludge in place and therefore didn't cause problems so far, - replacing magic constants for constraints with macros as far as it is obvious as to where they come from. This doesn't include taking advantage of the newbus way to get the parent DMA tags implemented by this change in order to divorce the IOTSBs of the PCI and SBus IOMMUs or for implementing the workaround for the DMA sync bug in Sabre (and Tomatillo) bridges, yet, though. o Get rid of the notion that nexus(4) (mostly) reflects an UPA bus by replacing ofw_upa.h and with ofw_nexus.h (which was repo-copied from ofw_upa.h) and renaming its content, which actually applies to all of Fireplane/Safari, JBus and UPA (in the host bus case), as appropriate. o Just use M_DEVBUF instead of a separate M_NEXUS malloc type for allocating the device info for the children of nexus(4). This is done in order to not need to export M_NEXUS when deriving drivers for subordinate busses from the nexus(4) class. o Use the DEFINE_CLASS_0() macro to declare the nexus(4) driver so we can derive subclasses from it. o Const'ify the nexus_excl_name and nexus_excl_type arrays as well as add 'associations' and 'rsc', which are pseudo-devices without resources and therefore of no real interest for nexus(4), to the former. o Let the nexus(4) device memory rman manage the entire 64-bit address space instead of just the UPA_MEMSTART to UPA_MEMEND subregion as Fireplane/Safari- and JBus-based machines use multiple ranges, which can't be as easily divided as in the case of UPA (limiting the address space only served for sanity checking anyway). o Use M_WAITOK instead of M_NOWAIT when allocating the device info for children of nexus(4) in order to give one less opportunity for adding devices to nexus(4) to fail. o While adapting the drivers affected by the above nexus(4) changes, change them to take advantage of rman_get_rid() instead of caching the RIDs assigned to allocated resources, now that the RIDs of resources are correctly set. o In iommu(4) and nexus(4) replace hard-coded functions names, which actually became outdated in several places, in panic strings and status massages with __func__. [1] o Use driver_filter_t in prototypes where appropriate. o Add my copyright to creator(4), fhc(4), nexus(4), psycho(4) and sbus(4) as I changed considerable amounts of these drivers as well as added a bunch of new features, workarounds for silicon bugs etc. o Fix some white space nits. Due to lack of access to Exx00 hardware, these changes, i.e. central(4) and fhc(4), couldn't be runtime tested on such a machine. Exx00 are currently reported to panic before trying to attach nexus(4) anyway though. PR: 76052 [1] Approved by: re (kensmith) diff 167308 Wed Mar 07 19:13:51 MST 2007 marius Rototill the sparc64 nexus(4) (actually this brings in the code the sun4v nexus(4) in turn is based on): o Change nexus(4) to manage the resources of its children so the respective device drivers don't need to figure them out of OFW themselves. o Change nexus(4) to provide the ofw_bus KOBJ interface instead of using IVARs for supplying the OFW node and the subset of standard properties of its children. Together with the previous change this also allows to fully take advantage of newbus in that drivers like fhc(4), which attach on multiple parent busses, no longer require different bus front-ends as obtaining the OFW node and properties as well as resource allocation works the same for all supported busses. As such this change also is part 4/4 of allowing creator(4) to work in USIII-based machines as it allows this driver to attach on both nexus(4) and upa(4). On the other hand removing these IVARs breaks API compatibility with the powerpc nexus(4) but which isn't that bad as a) sparc64 currently doesn't share any device driver hanging off of nexus(4) with powerpc and b) they were no longer compatible regarding OFW-related extensions at the pci(4) level since quite some time. o Provide bus_get_dma_tag methods in nexus(4) and its children in order to handle DMA tags in a hierarchical way and get rid of the sparc64_root_dma_tag kludge. Together with the previous two items this changes also allows to completely get rid of the nexus(4) IVAR interface. It also includes: - pushing the constraints previously specified by the nexus_dmatag down into the DMA tags of psycho(4) and sbus(4) as it's their IOMMUs which induce these restrictions (and nothing at the nexus(4) or anything that would warrant specifying them there), - fixing some obviously wrong constraints of the psycho(4) and sbus(4) DMA tags, which happened to not actually be used with the sparc64_root_dma_tag kludge in place and therefore didn't cause problems so far, - replacing magic constants for constraints with macros as far as it is obvious as to where they come from. This doesn't include taking advantage of the newbus way to get the parent DMA tags implemented by this change in order to divorce the IOTSBs of the PCI and SBus IOMMUs or for implementing the workaround for the DMA sync bug in Sabre (and Tomatillo) bridges, yet, though. o Get rid of the notion that nexus(4) (mostly) reflects an UPA bus by replacing ofw_upa.h and with ofw_nexus.h (which was repo-copied from ofw_upa.h) and renaming its content, which actually applies to all of Fireplane/Safari, JBus and UPA (in the host bus case), as appropriate. o Just use M_DEVBUF instead of a separate M_NEXUS malloc type for allocating the device info for the children of nexus(4). This is done in order to not need to export M_NEXUS when deriving drivers for subordinate busses from the nexus(4) class. o Use the DEFINE_CLASS_0() macro to declare the nexus(4) driver so we can derive subclasses from it. o Const'ify the nexus_excl_name and nexus_excl_type arrays as well as add 'associations' and 'rsc', which are pseudo-devices without resources and therefore of no real interest for nexus(4), to the former. o Let the nexus(4) device memory rman manage the entire 64-bit address space instead of just the UPA_MEMSTART to UPA_MEMEND subregion as Fireplane/Safari- and JBus-based machines use multiple ranges, which can't be as easily divided as in the case of UPA (limiting the address space only served for sanity checking anyway). o Use M_WAITOK instead of M_NOWAIT when allocating the device info for children of nexus(4) in order to give one less opportunity for adding devices to nexus(4) to fail. o While adapting the drivers affected by the above nexus(4) changes, change them to take advantage of rman_get_rid() instead of caching the RIDs assigned to allocated resources, now that the RIDs of resources are correctly set. o In iommu(4) and nexus(4) replace hard-coded functions names, which actually became outdated in several places, in panic strings and status massages with __func__. [1] o Use driver_filter_t in prototypes where appropriate. o Add my copyright to creator(4), fhc(4), nexus(4), psycho(4) and sbus(4) as I changed considerable amounts of these drivers as well as added a bunch of new features, workarounds for silicon bugs etc. o Fix some white space nits. Due to lack of access to Exx00 hardware, these changes, i.e. central(4) and fhc(4), couldn't be runtime tested on such a machine. Exx00 are currently reported to panic before trying to attach nexus(4) anyway though. PR: 76052 [1] Approved by: re (kensmith) diff 167308 Wed Mar 07 19:13:51 MST 2007 marius Rototill the sparc64 nexus(4) (actually this brings in the code the sun4v nexus(4) in turn is based on): o Change nexus(4) to manage the resources of its children so the respective device drivers don't need to figure them out of OFW themselves. o Change nexus(4) to provide the ofw_bus KOBJ interface instead of using IVARs for supplying the OFW node and the subset of standard properties of its children. Together with the previous change this also allows to fully take advantage of newbus in that drivers like fhc(4), which attach on multiple parent busses, no longer require different bus front-ends as obtaining the OFW node and properties as well as resource allocation works the same for all supported busses. As such this change also is part 4/4 of allowing creator(4) to work in USIII-based machines as it allows this driver to attach on both nexus(4) and upa(4). On the other hand removing these IVARs breaks API compatibility with the powerpc nexus(4) but which isn't that bad as a) sparc64 currently doesn't share any device driver hanging off of nexus(4) with powerpc and b) they were no longer compatible regarding OFW-related extensions at the pci(4) level since quite some time. o Provide bus_get_dma_tag methods in nexus(4) and its children in order to handle DMA tags in a hierarchical way and get rid of the sparc64_root_dma_tag kludge. Together with the previous two items this changes also allows to completely get rid of the nexus(4) IVAR interface. It also includes: - pushing the constraints previously specified by the nexus_dmatag down into the DMA tags of psycho(4) and sbus(4) as it's their IOMMUs which induce these restrictions (and nothing at the nexus(4) or anything that would warrant specifying them there), - fixing some obviously wrong constraints of the psycho(4) and sbus(4) DMA tags, which happened to not actually be used with the sparc64_root_dma_tag kludge in place and therefore didn't cause problems so far, - replacing magic constants for constraints with macros as far as it is obvious as to where they come from. This doesn't include taking advantage of the newbus way to get the parent DMA tags implemented by this change in order to divorce the IOTSBs of the PCI and SBus IOMMUs or for implementing the workaround for the DMA sync bug in Sabre (and Tomatillo) bridges, yet, though. o Get rid of the notion that nexus(4) (mostly) reflects an UPA bus by replacing ofw_upa.h and with ofw_nexus.h (which was repo-copied from ofw_upa.h) and renaming its content, which actually applies to all of Fireplane/Safari, JBus and UPA (in the host bus case), as appropriate. o Just use M_DEVBUF instead of a separate M_NEXUS malloc type for allocating the device info for the children of nexus(4). This is done in order to not need to export M_NEXUS when deriving drivers for subordinate busses from the nexus(4) class. o Use the DEFINE_CLASS_0() macro to declare the nexus(4) driver so we can derive subclasses from it. o Const'ify the nexus_excl_name and nexus_excl_type arrays as well as add 'associations' and 'rsc', which are pseudo-devices without resources and therefore of no real interest for nexus(4), to the former. o Let the nexus(4) device memory rman manage the entire 64-bit address space instead of just the UPA_MEMSTART to UPA_MEMEND subregion as Fireplane/Safari- and JBus-based machines use multiple ranges, which can't be as easily divided as in the case of UPA (limiting the address space only served for sanity checking anyway). o Use M_WAITOK instead of M_NOWAIT when allocating the device info for children of nexus(4) in order to give one less opportunity for adding devices to nexus(4) to fail. o While adapting the drivers affected by the above nexus(4) changes, change them to take advantage of rman_get_rid() instead of caching the RIDs assigned to allocated resources, now that the RIDs of resources are correctly set. o In iommu(4) and nexus(4) replace hard-coded functions names, which actually became outdated in several places, in panic strings and status massages with __func__. [1] o Use driver_filter_t in prototypes where appropriate. o Add my copyright to creator(4), fhc(4), nexus(4), psycho(4) and sbus(4) as I changed considerable amounts of these drivers as well as added a bunch of new features, workarounds for silicon bugs etc. o Fix some white space nits. Due to lack of access to Exx00 hardware, these changes, i.e. central(4) and fhc(4), couldn't be runtime tested on such a machine. Exx00 are currently reported to panic before trying to attach nexus(4) anyway though. PR: 76052 [1] Approved by: re (kensmith) diff 167308 Wed Mar 07 19:13:51 MST 2007 marius Rototill the sparc64 nexus(4) (actually this brings in the code the sun4v nexus(4) in turn is based on): o Change nexus(4) to manage the resources of its children so the respective device drivers don't need to figure them out of OFW themselves. o Change nexus(4) to provide the ofw_bus KOBJ interface instead of using IVARs for supplying the OFW node and the subset of standard properties of its children. Together with the previous change this also allows to fully take advantage of newbus in that drivers like fhc(4), which attach on multiple parent busses, no longer require different bus front-ends as obtaining the OFW node and properties as well as resource allocation works the same for all supported busses. As such this change also is part 4/4 of allowing creator(4) to work in USIII-based machines as it allows this driver to attach on both nexus(4) and upa(4). On the other hand removing these IVARs breaks API compatibility with the powerpc nexus(4) but which isn't that bad as a) sparc64 currently doesn't share any device driver hanging off of nexus(4) with powerpc and b) they were no longer compatible regarding OFW-related extensions at the pci(4) level since quite some time. o Provide bus_get_dma_tag methods in nexus(4) and its children in order to handle DMA tags in a hierarchical way and get rid of the sparc64_root_dma_tag kludge. Together with the previous two items this changes also allows to completely get rid of the nexus(4) IVAR interface. It also includes: - pushing the constraints previously specified by the nexus_dmatag down into the DMA tags of psycho(4) and sbus(4) as it's their IOMMUs which induce these restrictions (and nothing at the nexus(4) or anything that would warrant specifying them there), - fixing some obviously wrong constraints of the psycho(4) and sbus(4) DMA tags, which happened to not actually be used with the sparc64_root_dma_tag kludge in place and therefore didn't cause problems so far, - replacing magic constants for constraints with macros as far as it is obvious as to where they come from. This doesn't include taking advantage of the newbus way to get the parent DMA tags implemented by this change in order to divorce the IOTSBs of the PCI and SBus IOMMUs or for implementing the workaround for the DMA sync bug in Sabre (and Tomatillo) bridges, yet, though. o Get rid of the notion that nexus(4) (mostly) reflects an UPA bus by replacing ofw_upa.h and with ofw_nexus.h (which was repo-copied from ofw_upa.h) and renaming its content, which actually applies to all of Fireplane/Safari, JBus and UPA (in the host bus case), as appropriate. o Just use M_DEVBUF instead of a separate M_NEXUS malloc type for allocating the device info for the children of nexus(4). This is done in order to not need to export M_NEXUS when deriving drivers for subordinate busses from the nexus(4) class. o Use the DEFINE_CLASS_0() macro to declare the nexus(4) driver so we can derive subclasses from it. o Const'ify the nexus_excl_name and nexus_excl_type arrays as well as add 'associations' and 'rsc', which are pseudo-devices without resources and therefore of no real interest for nexus(4), to the former. o Let the nexus(4) device memory rman manage the entire 64-bit address space instead of just the UPA_MEMSTART to UPA_MEMEND subregion as Fireplane/Safari- and JBus-based machines use multiple ranges, which can't be as easily divided as in the case of UPA (limiting the address space only served for sanity checking anyway). o Use M_WAITOK instead of M_NOWAIT when allocating the device info for children of nexus(4) in order to give one less opportunity for adding devices to nexus(4) to fail. o While adapting the drivers affected by the above nexus(4) changes, change them to take advantage of rman_get_rid() instead of caching the RIDs assigned to allocated resources, now that the RIDs of resources are correctly set. o In iommu(4) and nexus(4) replace hard-coded functions names, which actually became outdated in several places, in panic strings and status massages with __func__. [1] o Use driver_filter_t in prototypes where appropriate. o Add my copyright to creator(4), fhc(4), nexus(4), psycho(4) and sbus(4) as I changed considerable amounts of these drivers as well as added a bunch of new features, workarounds for silicon bugs etc. o Fix some white space nits. Due to lack of access to Exx00 hardware, these changes, i.e. central(4) and fhc(4), couldn't be runtime tested on such a machine. Exx00 are currently reported to panic before trying to attach nexus(4) anyway though. PR: 76052 [1] Approved by: re (kensmith) diff 167308 Wed Mar 07 19:13:51 MST 2007 marius Rototill the sparc64 nexus(4) (actually this brings in the code the sun4v nexus(4) in turn is based on): o Change nexus(4) to manage the resources of its children so the respective device drivers don't need to figure them out of OFW themselves. o Change nexus(4) to provide the ofw_bus KOBJ interface instead of using IVARs for supplying the OFW node and the subset of standard properties of its children. Together with the previous change this also allows to fully take advantage of newbus in that drivers like fhc(4), which attach on multiple parent busses, no longer require different bus front-ends as obtaining the OFW node and properties as well as resource allocation works the same for all supported busses. As such this change also is part 4/4 of allowing creator(4) to work in USIII-based machines as it allows this driver to attach on both nexus(4) and upa(4). On the other hand removing these IVARs breaks API compatibility with the powerpc nexus(4) but which isn't that bad as a) sparc64 currently doesn't share any device driver hanging off of nexus(4) with powerpc and b) they were no longer compatible regarding OFW-related extensions at the pci(4) level since quite some time. o Provide bus_get_dma_tag methods in nexus(4) and its children in order to handle DMA tags in a hierarchical way and get rid of the sparc64_root_dma_tag kludge. Together with the previous two items this changes also allows to completely get rid of the nexus(4) IVAR interface. It also includes: - pushing the constraints previously specified by the nexus_dmatag down into the DMA tags of psycho(4) and sbus(4) as it's their IOMMUs which induce these restrictions (and nothing at the nexus(4) or anything that would warrant specifying them there), - fixing some obviously wrong constraints of the psycho(4) and sbus(4) DMA tags, which happened to not actually be used with the sparc64_root_dma_tag kludge in place and therefore didn't cause problems so far, - replacing magic constants for constraints with macros as far as it is obvious as to where they come from. This doesn't include taking advantage of the newbus way to get the parent DMA tags implemented by this change in order to divorce the IOTSBs of the PCI and SBus IOMMUs or for implementing the workaround for the DMA sync bug in Sabre (and Tomatillo) bridges, yet, though. o Get rid of the notion that nexus(4) (mostly) reflects an UPA bus by replacing ofw_upa.h and with ofw_nexus.h (which was repo-copied from ofw_upa.h) and renaming its content, which actually applies to all of Fireplane/Safari, JBus and UPA (in the host bus case), as appropriate. o Just use M_DEVBUF instead of a separate M_NEXUS malloc type for allocating the device info for the children of nexus(4). This is done in order to not need to export M_NEXUS when deriving drivers for subordinate busses from the nexus(4) class. o Use the DEFINE_CLASS_0() macro to declare the nexus(4) driver so we can derive subclasses from it. o Const'ify the nexus_excl_name and nexus_excl_type arrays as well as add 'associations' and 'rsc', which are pseudo-devices without resources and therefore of no real interest for nexus(4), to the former. o Let the nexus(4) device memory rman manage the entire 64-bit address space instead of just the UPA_MEMSTART to UPA_MEMEND subregion as Fireplane/Safari- and JBus-based machines use multiple ranges, which can't be as easily divided as in the case of UPA (limiting the address space only served for sanity checking anyway). o Use M_WAITOK instead of M_NOWAIT when allocating the device info for children of nexus(4) in order to give one less opportunity for adding devices to nexus(4) to fail. o While adapting the drivers affected by the above nexus(4) changes, change them to take advantage of rman_get_rid() instead of caching the RIDs assigned to allocated resources, now that the RIDs of resources are correctly set. o In iommu(4) and nexus(4) replace hard-coded functions names, which actually became outdated in several places, in panic strings and status massages with __func__. [1] o Use driver_filter_t in prototypes where appropriate. o Add my copyright to creator(4), fhc(4), nexus(4), psycho(4) and sbus(4) as I changed considerable amounts of these drivers as well as added a bunch of new features, workarounds for silicon bugs etc. o Fix some white space nits. Due to lack of access to Exx00 hardware, these changes, i.e. central(4) and fhc(4), couldn't be runtime tested on such a machine. Exx00 are currently reported to panic before trying to attach nexus(4) anyway though. PR: 76052 [1] Approved by: re (kensmith) diff 167308 Wed Mar 07 19:13:51 MST 2007 marius Rototill the sparc64 nexus(4) (actually this brings in the code the sun4v nexus(4) in turn is based on): o Change nexus(4) to manage the resources of its children so the respective device drivers don't need to figure them out of OFW themselves. o Change nexus(4) to provide the ofw_bus KOBJ interface instead of using IVARs for supplying the OFW node and the subset of standard properties of its children. Together with the previous change this also allows to fully take advantage of newbus in that drivers like fhc(4), which attach on multiple parent busses, no longer require different bus front-ends as obtaining the OFW node and properties as well as resource allocation works the same for all supported busses. As such this change also is part 4/4 of allowing creator(4) to work in USIII-based machines as it allows this driver to attach on both nexus(4) and upa(4). On the other hand removing these IVARs breaks API compatibility with the powerpc nexus(4) but which isn't that bad as a) sparc64 currently doesn't share any device driver hanging off of nexus(4) with powerpc and b) they were no longer compatible regarding OFW-related extensions at the pci(4) level since quite some time. o Provide bus_get_dma_tag methods in nexus(4) and its children in order to handle DMA tags in a hierarchical way and get rid of the sparc64_root_dma_tag kludge. Together with the previous two items this changes also allows to completely get rid of the nexus(4) IVAR interface. It also includes: - pushing the constraints previously specified by the nexus_dmatag down into the DMA tags of psycho(4) and sbus(4) as it's their IOMMUs which induce these restrictions (and nothing at the nexus(4) or anything that would warrant specifying them there), - fixing some obviously wrong constraints of the psycho(4) and sbus(4) DMA tags, which happened to not actually be used with the sparc64_root_dma_tag kludge in place and therefore didn't cause problems so far, - replacing magic constants for constraints with macros as far as it is obvious as to where they come from. This doesn't include taking advantage of the newbus way to get the parent DMA tags implemented by this change in order to divorce the IOTSBs of the PCI and SBus IOMMUs or for implementing the workaround for the DMA sync bug in Sabre (and Tomatillo) bridges, yet, though. o Get rid of the notion that nexus(4) (mostly) reflects an UPA bus by replacing ofw_upa.h and with ofw_nexus.h (which was repo-copied from ofw_upa.h) and renaming its content, which actually applies to all of Fireplane/Safari, JBus and UPA (in the host bus case), as appropriate. o Just use M_DEVBUF instead of a separate M_NEXUS malloc type for allocating the device info for the children of nexus(4). This is done in order to not need to export M_NEXUS when deriving drivers for subordinate busses from the nexus(4) class. o Use the DEFINE_CLASS_0() macro to declare the nexus(4) driver so we can derive subclasses from it. o Const'ify the nexus_excl_name and nexus_excl_type arrays as well as add 'associations' and 'rsc', which are pseudo-devices without resources and therefore of no real interest for nexus(4), to the former. o Let the nexus(4) device memory rman manage the entire 64-bit address space instead of just the UPA_MEMSTART to UPA_MEMEND subregion as Fireplane/Safari- and JBus-based machines use multiple ranges, which can't be as easily divided as in the case of UPA (limiting the address space only served for sanity checking anyway). o Use M_WAITOK instead of M_NOWAIT when allocating the device info for children of nexus(4) in order to give one less opportunity for adding devices to nexus(4) to fail. o While adapting the drivers affected by the above nexus(4) changes, change them to take advantage of rman_get_rid() instead of caching the RIDs assigned to allocated resources, now that the RIDs of resources are correctly set. o In iommu(4) and nexus(4) replace hard-coded functions names, which actually became outdated in several places, in panic strings and status massages with __func__. [1] o Use driver_filter_t in prototypes where appropriate. o Add my copyright to creator(4), fhc(4), nexus(4), psycho(4) and sbus(4) as I changed considerable amounts of these drivers as well as added a bunch of new features, workarounds for silicon bugs etc. o Fix some white space nits. Due to lack of access to Exx00 hardware, these changes, i.e. central(4) and fhc(4), couldn't be runtime tested on such a machine. Exx00 are currently reported to panic before trying to attach nexus(4) anyway though. PR: 76052 [1] Approved by: re (kensmith) diff 167308 Wed Mar 07 19:13:51 MST 2007 marius Rototill the sparc64 nexus(4) (actually this brings in the code the sun4v nexus(4) in turn is based on): o Change nexus(4) to manage the resources of its children so the respective device drivers don't need to figure them out of OFW themselves. o Change nexus(4) to provide the ofw_bus KOBJ interface instead of using IVARs for supplying the OFW node and the subset of standard properties of its children. Together with the previous change this also allows to fully take advantage of newbus in that drivers like fhc(4), which attach on multiple parent busses, no longer require different bus front-ends as obtaining the OFW node and properties as well as resource allocation works the same for all supported busses. As such this change also is part 4/4 of allowing creator(4) to work in USIII-based machines as it allows this driver to attach on both nexus(4) and upa(4). On the other hand removing these IVARs breaks API compatibility with the powerpc nexus(4) but which isn't that bad as a) sparc64 currently doesn't share any device driver hanging off of nexus(4) with powerpc and b) they were no longer compatible regarding OFW-related extensions at the pci(4) level since quite some time. o Provide bus_get_dma_tag methods in nexus(4) and its children in order to handle DMA tags in a hierarchical way and get rid of the sparc64_root_dma_tag kludge. Together with the previous two items this changes also allows to completely get rid of the nexus(4) IVAR interface. It also includes: - pushing the constraints previously specified by the nexus_dmatag down into the DMA tags of psycho(4) and sbus(4) as it's their IOMMUs which induce these restrictions (and nothing at the nexus(4) or anything that would warrant specifying them there), - fixing some obviously wrong constraints of the psycho(4) and sbus(4) DMA tags, which happened to not actually be used with the sparc64_root_dma_tag kludge in place and therefore didn't cause problems so far, - replacing magic constants for constraints with macros as far as it is obvious as to where they come from. This doesn't include taking advantage of the newbus way to get the parent DMA tags implemented by this change in order to divorce the IOTSBs of the PCI and SBus IOMMUs or for implementing the workaround for the DMA sync bug in Sabre (and Tomatillo) bridges, yet, though. o Get rid of the notion that nexus(4) (mostly) reflects an UPA bus by replacing ofw_upa.h and with ofw_nexus.h (which was repo-copied from ofw_upa.h) and renaming its content, which actually applies to all of Fireplane/Safari, JBus and UPA (in the host bus case), as appropriate. o Just use M_DEVBUF instead of a separate M_NEXUS malloc type for allocating the device info for the children of nexus(4). This is done in order to not need to export M_NEXUS when deriving drivers for subordinate busses from the nexus(4) class. o Use the DEFINE_CLASS_0() macro to declare the nexus(4) driver so we can derive subclasses from it. o Const'ify the nexus_excl_name and nexus_excl_type arrays as well as add 'associations' and 'rsc', which are pseudo-devices without resources and therefore of no real interest for nexus(4), to the former. o Let the nexus(4) device memory rman manage the entire 64-bit address space instead of just the UPA_MEMSTART to UPA_MEMEND subregion as Fireplane/Safari- and JBus-based machines use multiple ranges, which can't be as easily divided as in the case of UPA (limiting the address space only served for sanity checking anyway). o Use M_WAITOK instead of M_NOWAIT when allocating the device info for children of nexus(4) in order to give one less opportunity for adding devices to nexus(4) to fail. o While adapting the drivers affected by the above nexus(4) changes, change them to take advantage of rman_get_rid() instead of caching the RIDs assigned to allocated resources, now that the RIDs of resources are correctly set. o In iommu(4) and nexus(4) replace hard-coded functions names, which actually became outdated in several places, in panic strings and status massages with __func__. [1] o Use driver_filter_t in prototypes where appropriate. o Add my copyright to creator(4), fhc(4), nexus(4), psycho(4) and sbus(4) as I changed considerable amounts of these drivers as well as added a bunch of new features, workarounds for silicon bugs etc. o Fix some white space nits. Due to lack of access to Exx00 hardware, these changes, i.e. central(4) and fhc(4), couldn't be runtime tested on such a machine. Exx00 are currently reported to panic before trying to attach nexus(4) anyway though. PR: 76052 [1] Approved by: re (kensmith) diff 167308 Wed Mar 07 19:13:51 MST 2007 marius Rototill the sparc64 nexus(4) (actually this brings in the code the sun4v nexus(4) in turn is based on): o Change nexus(4) to manage the resources of its children so the respective device drivers don't need to figure them out of OFW themselves. o Change nexus(4) to provide the ofw_bus KOBJ interface instead of using IVARs for supplying the OFW node and the subset of standard properties of its children. Together with the previous change this also allows to fully take advantage of newbus in that drivers like fhc(4), which attach on multiple parent busses, no longer require different bus front-ends as obtaining the OFW node and properties as well as resource allocation works the same for all supported busses. As such this change also is part 4/4 of allowing creator(4) to work in USIII-based machines as it allows this driver to attach on both nexus(4) and upa(4). On the other hand removing these IVARs breaks API compatibility with the powerpc nexus(4) but which isn't that bad as a) sparc64 currently doesn't share any device driver hanging off of nexus(4) with powerpc and b) they were no longer compatible regarding OFW-related extensions at the pci(4) level since quite some time. o Provide bus_get_dma_tag methods in nexus(4) and its children in order to handle DMA tags in a hierarchical way and get rid of the sparc64_root_dma_tag kludge. Together with the previous two items this changes also allows to completely get rid of the nexus(4) IVAR interface. It also includes: - pushing the constraints previously specified by the nexus_dmatag down into the DMA tags of psycho(4) and sbus(4) as it's their IOMMUs which induce these restrictions (and nothing at the nexus(4) or anything that would warrant specifying them there), - fixing some obviously wrong constraints of the psycho(4) and sbus(4) DMA tags, which happened to not actually be used with the sparc64_root_dma_tag kludge in place and therefore didn't cause problems so far, - replacing magic constants for constraints with macros as far as it is obvious as to where they come from. This doesn't include taking advantage of the newbus way to get the parent DMA tags implemented by this change in order to divorce the IOTSBs of the PCI and SBus IOMMUs or for implementing the workaround for the DMA sync bug in Sabre (and Tomatillo) bridges, yet, though. o Get rid of the notion that nexus(4) (mostly) reflects an UPA bus by replacing ofw_upa.h and with ofw_nexus.h (which was repo-copied from ofw_upa.h) and renaming its content, which actually applies to all of Fireplane/Safari, JBus and UPA (in the host bus case), as appropriate. o Just use M_DEVBUF instead of a separate M_NEXUS malloc type for allocating the device info for the children of nexus(4). This is done in order to not need to export M_NEXUS when deriving drivers for subordinate busses from the nexus(4) class. o Use the DEFINE_CLASS_0() macro to declare the nexus(4) driver so we can derive subclasses from it. o Const'ify the nexus_excl_name and nexus_excl_type arrays as well as add 'associations' and 'rsc', which are pseudo-devices without resources and therefore of no real interest for nexus(4), to the former. o Let the nexus(4) device memory rman manage the entire 64-bit address space instead of just the UPA_MEMSTART to UPA_MEMEND subregion as Fireplane/Safari- and JBus-based machines use multiple ranges, which can't be as easily divided as in the case of UPA (limiting the address space only served for sanity checking anyway). o Use M_WAITOK instead of M_NOWAIT when allocating the device info for children of nexus(4) in order to give one less opportunity for adding devices to nexus(4) to fail. o While adapting the drivers affected by the above nexus(4) changes, change them to take advantage of rman_get_rid() instead of caching the RIDs assigned to allocated resources, now that the RIDs of resources are correctly set. o In iommu(4) and nexus(4) replace hard-coded functions names, which actually became outdated in several places, in panic strings and status massages with __func__. [1] o Use driver_filter_t in prototypes where appropriate. o Add my copyright to creator(4), fhc(4), nexus(4), psycho(4) and sbus(4) as I changed considerable amounts of these drivers as well as added a bunch of new features, workarounds for silicon bugs etc. o Fix some white space nits. Due to lack of access to Exx00 hardware, these changes, i.e. central(4) and fhc(4), couldn't be runtime tested on such a machine. Exx00 are currently reported to panic before trying to attach nexus(4) anyway though. PR: 76052 [1] Approved by: re (kensmith) diff 167308 Wed Mar 07 19:13:51 MST 2007 marius Rototill the sparc64 nexus(4) (actually this brings in the code the sun4v nexus(4) in turn is based on): o Change nexus(4) to manage the resources of its children so the respective device drivers don't need to figure them out of OFW themselves. o Change nexus(4) to provide the ofw_bus KOBJ interface instead of using IVARs for supplying the OFW node and the subset of standard properties of its children. Together with the previous change this also allows to fully take advantage of newbus in that drivers like fhc(4), which attach on multiple parent busses, no longer require different bus front-ends as obtaining the OFW node and properties as well as resource allocation works the same for all supported busses. As such this change also is part 4/4 of allowing creator(4) to work in USIII-based machines as it allows this driver to attach on both nexus(4) and upa(4). On the other hand removing these IVARs breaks API compatibility with the powerpc nexus(4) but which isn't that bad as a) sparc64 currently doesn't share any device driver hanging off of nexus(4) with powerpc and b) they were no longer compatible regarding OFW-related extensions at the pci(4) level since quite some time. o Provide bus_get_dma_tag methods in nexus(4) and its children in order to handle DMA tags in a hierarchical way and get rid of the sparc64_root_dma_tag kludge. Together with the previous two items this changes also allows to completely get rid of the nexus(4) IVAR interface. It also includes: - pushing the constraints previously specified by the nexus_dmatag down into the DMA tags of psycho(4) and sbus(4) as it's their IOMMUs which induce these restrictions (and nothing at the nexus(4) or anything that would warrant specifying them there), - fixing some obviously wrong constraints of the psycho(4) and sbus(4) DMA tags, which happened to not actually be used with the sparc64_root_dma_tag kludge in place and therefore didn't cause problems so far, - replacing magic constants for constraints with macros as far as it is obvious as to where they come from. This doesn't include taking advantage of the newbus way to get the parent DMA tags implemented by this change in order to divorce the IOTSBs of the PCI and SBus IOMMUs or for implementing the workaround for the DMA sync bug in Sabre (and Tomatillo) bridges, yet, though. o Get rid of the notion that nexus(4) (mostly) reflects an UPA bus by replacing ofw_upa.h and with ofw_nexus.h (which was repo-copied from ofw_upa.h) and renaming its content, which actually applies to all of Fireplane/Safari, JBus and UPA (in the host bus case), as appropriate. o Just use M_DEVBUF instead of a separate M_NEXUS malloc type for allocating the device info for the children of nexus(4). This is done in order to not need to export M_NEXUS when deriving drivers for subordinate busses from the nexus(4) class. o Use the DEFINE_CLASS_0() macro to declare the nexus(4) driver so we can derive subclasses from it. o Const'ify the nexus_excl_name and nexus_excl_type arrays as well as add 'associations' and 'rsc', which are pseudo-devices without resources and therefore of no real interest for nexus(4), to the former. o Let the nexus(4) device memory rman manage the entire 64-bit address space instead of just the UPA_MEMSTART to UPA_MEMEND subregion as Fireplane/Safari- and JBus-based machines use multiple ranges, which can't be as easily divided as in the case of UPA (limiting the address space only served for sanity checking anyway). o Use M_WAITOK instead of M_NOWAIT when allocating the device info for children of nexus(4) in order to give one less opportunity for adding devices to nexus(4) to fail. o While adapting the drivers affected by the above nexus(4) changes, change them to take advantage of rman_get_rid() instead of caching the RIDs assigned to allocated resources, now that the RIDs of resources are correctly set. o In iommu(4) and nexus(4) replace hard-coded functions names, which actually became outdated in several places, in panic strings and status massages with __func__. [1] o Use driver_filter_t in prototypes where appropriate. o Add my copyright to creator(4), fhc(4), nexus(4), psycho(4) and sbus(4) as I changed considerable amounts of these drivers as well as added a bunch of new features, workarounds for silicon bugs etc. o Fix some white space nits. Due to lack of access to Exx00 hardware, these changes, i.e. central(4) and fhc(4), couldn't be runtime tested on such a machine. Exx00 are currently reported to panic before trying to attach nexus(4) anyway though. PR: 76052 [1] Approved by: re (kensmith) diff 167308 Wed Mar 07 19:13:51 MST 2007 marius Rototill the sparc64 nexus(4) (actually this brings in the code the sun4v nexus(4) in turn is based on): o Change nexus(4) to manage the resources of its children so the respective device drivers don't need to figure them out of OFW themselves. o Change nexus(4) to provide the ofw_bus KOBJ interface instead of using IVARs for supplying the OFW node and the subset of standard properties of its children. Together with the previous change this also allows to fully take advantage of newbus in that drivers like fhc(4), which attach on multiple parent busses, no longer require different bus front-ends as obtaining the OFW node and properties as well as resource allocation works the same for all supported busses. As such this change also is part 4/4 of allowing creator(4) to work in USIII-based machines as it allows this driver to attach on both nexus(4) and upa(4). On the other hand removing these IVARs breaks API compatibility with the powerpc nexus(4) but which isn't that bad as a) sparc64 currently doesn't share any device driver hanging off of nexus(4) with powerpc and b) they were no longer compatible regarding OFW-related extensions at the pci(4) level since quite some time. o Provide bus_get_dma_tag methods in nexus(4) and its children in order to handle DMA tags in a hierarchical way and get rid of the sparc64_root_dma_tag kludge. Together with the previous two items this changes also allows to completely get rid of the nexus(4) IVAR interface. It also includes: - pushing the constraints previously specified by the nexus_dmatag down into the DMA tags of psycho(4) and sbus(4) as it's their IOMMUs which induce these restrictions (and nothing at the nexus(4) or anything that would warrant specifying them there), - fixing some obviously wrong constraints of the psycho(4) and sbus(4) DMA tags, which happened to not actually be used with the sparc64_root_dma_tag kludge in place and therefore didn't cause problems so far, - replacing magic constants for constraints with macros as far as it is obvious as to where they come from. This doesn't include taking advantage of the newbus way to get the parent DMA tags implemented by this change in order to divorce the IOTSBs of the PCI and SBus IOMMUs or for implementing the workaround for the DMA sync bug in Sabre (and Tomatillo) bridges, yet, though. o Get rid of the notion that nexus(4) (mostly) reflects an UPA bus by replacing ofw_upa.h and with ofw_nexus.h (which was repo-copied from ofw_upa.h) and renaming its content, which actually applies to all of Fireplane/Safari, JBus and UPA (in the host bus case), as appropriate. o Just use M_DEVBUF instead of a separate M_NEXUS malloc type for allocating the device info for the children of nexus(4). This is done in order to not need to export M_NEXUS when deriving drivers for subordinate busses from the nexus(4) class. o Use the DEFINE_CLASS_0() macro to declare the nexus(4) driver so we can derive subclasses from it. o Const'ify the nexus_excl_name and nexus_excl_type arrays as well as add 'associations' and 'rsc', which are pseudo-devices without resources and therefore of no real interest for nexus(4), to the former. o Let the nexus(4) device memory rman manage the entire 64-bit address space instead of just the UPA_MEMSTART to UPA_MEMEND subregion as Fireplane/Safari- and JBus-based machines use multiple ranges, which can't be as easily divided as in the case of UPA (limiting the address space only served for sanity checking anyway). o Use M_WAITOK instead of M_NOWAIT when allocating the device info for children of nexus(4) in order to give one less opportunity for adding devices to nexus(4) to fail. o While adapting the drivers affected by the above nexus(4) changes, change them to take advantage of rman_get_rid() instead of caching the RIDs assigned to allocated resources, now that the RIDs of resources are correctly set. o In iommu(4) and nexus(4) replace hard-coded functions names, which actually became outdated in several places, in panic strings and status massages with __func__. [1] o Use driver_filter_t in prototypes where appropriate. o Add my copyright to creator(4), fhc(4), nexus(4), psycho(4) and sbus(4) as I changed considerable amounts of these drivers as well as added a bunch of new features, workarounds for silicon bugs etc. o Fix some white space nits. Due to lack of access to Exx00 hardware, these changes, i.e. central(4) and fhc(4), couldn't be runtime tested on such a machine. Exx00 are currently reported to panic before trying to attach nexus(4) anyway though. PR: 76052 [1] Approved by: re (kensmith) diff 167308 Wed Mar 07 19:13:51 MST 2007 marius Rototill the sparc64 nexus(4) (actually this brings in the code the sun4v nexus(4) in turn is based on): o Change nexus(4) to manage the resources of its children so the respective device drivers don't need to figure them out of OFW themselves. o Change nexus(4) to provide the ofw_bus KOBJ interface instead of using IVARs for supplying the OFW node and the subset of standard properties of its children. Together with the previous change this also allows to fully take advantage of newbus in that drivers like fhc(4), which attach on multiple parent busses, no longer require different bus front-ends as obtaining the OFW node and properties as well as resource allocation works the same for all supported busses. As such this change also is part 4/4 of allowing creator(4) to work in USIII-based machines as it allows this driver to attach on both nexus(4) and upa(4). On the other hand removing these IVARs breaks API compatibility with the powerpc nexus(4) but which isn't that bad as a) sparc64 currently doesn't share any device driver hanging off of nexus(4) with powerpc and b) they were no longer compatible regarding OFW-related extensions at the pci(4) level since quite some time. o Provide bus_get_dma_tag methods in nexus(4) and its children in order to handle DMA tags in a hierarchical way and get rid of the sparc64_root_dma_tag kludge. Together with the previous two items this changes also allows to completely get rid of the nexus(4) IVAR interface. It also includes: - pushing the constraints previously specified by the nexus_dmatag down into the DMA tags of psycho(4) and sbus(4) as it's their IOMMUs which induce these restrictions (and nothing at the nexus(4) or anything that would warrant specifying them there), - fixing some obviously wrong constraints of the psycho(4) and sbus(4) DMA tags, which happened to not actually be used with the sparc64_root_dma_tag kludge in place and therefore didn't cause problems so far, - replacing magic constants for constraints with macros as far as it is obvious as to where they come from. This doesn't include taking advantage of the newbus way to get the parent DMA tags implemented by this change in order to divorce the IOTSBs of the PCI and SBus IOMMUs or for implementing the workaround for the DMA sync bug in Sabre (and Tomatillo) bridges, yet, though. o Get rid of the notion that nexus(4) (mostly) reflects an UPA bus by replacing ofw_upa.h and with ofw_nexus.h (which was repo-copied from ofw_upa.h) and renaming its content, which actually applies to all of Fireplane/Safari, JBus and UPA (in the host bus case), as appropriate. o Just use M_DEVBUF instead of a separate M_NEXUS malloc type for allocating the device info for the children of nexus(4). This is done in order to not need to export M_NEXUS when deriving drivers for subordinate busses from the nexus(4) class. o Use the DEFINE_CLASS_0() macro to declare the nexus(4) driver so we can derive subclasses from it. o Const'ify the nexus_excl_name and nexus_excl_type arrays as well as add 'associations' and 'rsc', which are pseudo-devices without resources and therefore of no real interest for nexus(4), to the former. o Let the nexus(4) device memory rman manage the entire 64-bit address space instead of just the UPA_MEMSTART to UPA_MEMEND subregion as Fireplane/Safari- and JBus-based machines use multiple ranges, which can't be as easily divided as in the case of UPA (limiting the address space only served for sanity checking anyway). o Use M_WAITOK instead of M_NOWAIT when allocating the device info for children of nexus(4) in order to give one less opportunity for adding devices to nexus(4) to fail. o While adapting the drivers affected by the above nexus(4) changes, change them to take advantage of rman_get_rid() instead of caching the RIDs assigned to allocated resources, now that the RIDs of resources are correctly set. o In iommu(4) and nexus(4) replace hard-coded functions names, which actually became outdated in several places, in panic strings and status massages with __func__. [1] o Use driver_filter_t in prototypes where appropriate. o Add my copyright to creator(4), fhc(4), nexus(4), psycho(4) and sbus(4) as I changed considerable amounts of these drivers as well as added a bunch of new features, workarounds for silicon bugs etc. o Fix some white space nits. Due to lack of access to Exx00 hardware, these changes, i.e. central(4) and fhc(4), couldn't be runtime tested on such a machine. Exx00 are currently reported to panic before trying to attach nexus(4) anyway though. PR: 76052 [1] Approved by: re (kensmith) diff 167308 Wed Mar 07 19:13:51 MST 2007 marius Rototill the sparc64 nexus(4) (actually this brings in the code the sun4v nexus(4) in turn is based on): o Change nexus(4) to manage the resources of its children so the respective device drivers don't need to figure them out of OFW themselves. o Change nexus(4) to provide the ofw_bus KOBJ interface instead of using IVARs for supplying the OFW node and the subset of standard properties of its children. Together with the previous change this also allows to fully take advantage of newbus in that drivers like fhc(4), which attach on multiple parent busses, no longer require different bus front-ends as obtaining the OFW node and properties as well as resource allocation works the same for all supported busses. As such this change also is part 4/4 of allowing creator(4) to work in USIII-based machines as it allows this driver to attach on both nexus(4) and upa(4). On the other hand removing these IVARs breaks API compatibility with the powerpc nexus(4) but which isn't that bad as a) sparc64 currently doesn't share any device driver hanging off of nexus(4) with powerpc and b) they were no longer compatible regarding OFW-related extensions at the pci(4) level since quite some time. o Provide bus_get_dma_tag methods in nexus(4) and its children in order to handle DMA tags in a hierarchical way and get rid of the sparc64_root_dma_tag kludge. Together with the previous two items this changes also allows to completely get rid of the nexus(4) IVAR interface. It also includes: - pushing the constraints previously specified by the nexus_dmatag down into the DMA tags of psycho(4) and sbus(4) as it's their IOMMUs which induce these restrictions (and nothing at the nexus(4) or anything that would warrant specifying them there), - fixing some obviously wrong constraints of the psycho(4) and sbus(4) DMA tags, which happened to not actually be used with the sparc64_root_dma_tag kludge in place and therefore didn't cause problems so far, - replacing magic constants for constraints with macros as far as it is obvious as to where they come from. This doesn't include taking advantage of the newbus way to get the parent DMA tags implemented by this change in order to divorce the IOTSBs of the PCI and SBus IOMMUs or for implementing the workaround for the DMA sync bug in Sabre (and Tomatillo) bridges, yet, though. o Get rid of the notion that nexus(4) (mostly) reflects an UPA bus by replacing ofw_upa.h and with ofw_nexus.h (which was repo-copied from ofw_upa.h) and renaming its content, which actually applies to all of Fireplane/Safari, JBus and UPA (in the host bus case), as appropriate. o Just use M_DEVBUF instead of a separate M_NEXUS malloc type for allocating the device info for the children of nexus(4). This is done in order to not need to export M_NEXUS when deriving drivers for subordinate busses from the nexus(4) class. o Use the DEFINE_CLASS_0() macro to declare the nexus(4) driver so we can derive subclasses from it. o Const'ify the nexus_excl_name and nexus_excl_type arrays as well as add 'associations' and 'rsc', which are pseudo-devices without resources and therefore of no real interest for nexus(4), to the former. o Let the nexus(4) device memory rman manage the entire 64-bit address space instead of just the UPA_MEMSTART to UPA_MEMEND subregion as Fireplane/Safari- and JBus-based machines use multiple ranges, which can't be as easily divided as in the case of UPA (limiting the address space only served for sanity checking anyway). o Use M_WAITOK instead of M_NOWAIT when allocating the device info for children of nexus(4) in order to give one less opportunity for adding devices to nexus(4) to fail. o While adapting the drivers affected by the above nexus(4) changes, change them to take advantage of rman_get_rid() instead of caching the RIDs assigned to allocated resources, now that the RIDs of resources are correctly set. o In iommu(4) and nexus(4) replace hard-coded functions names, which actually became outdated in several places, in panic strings and status massages with __func__. [1] o Use driver_filter_t in prototypes where appropriate. o Add my copyright to creator(4), fhc(4), nexus(4), psycho(4) and sbus(4) as I changed considerable amounts of these drivers as well as added a bunch of new features, workarounds for silicon bugs etc. o Fix some white space nits. Due to lack of access to Exx00 hardware, these changes, i.e. central(4) and fhc(4), couldn't be runtime tested on such a machine. Exx00 are currently reported to panic before trying to attach nexus(4) anyway though. PR: 76052 [1] Approved by: re (kensmith) |
Completed in 300 milliseconds