Searched hist:4 (Results 376 - 400 of 17372) sorted by relevance
| /freebsd-10.2-release/sys/dev/mpr/mpi/ | ||
| H A D | mpi2_init.h | diff 265388 Mon May 05 20:43:36 MDT 2014 ken MFC the mpr(4) driver for LSI's 12Gb SAS cards. This includes r265236, r265237, r265241 and r265261: ------------------------------------------------------------------------ r265236 | ken | 2014-05-02 14:25:09 -0600 (Fri, 02 May 2014) | 51 lines Bring in the mpr(4) driver for LSI's MPT3 12Gb SAS controllers. This is derived from the mps(4) driver, but it supports only the 12Gb IT and IR hardware including the SAS 3004, SAS 3008 and SAS 3108. Some notes about this driver: o The 12Gb hardware can do "FastPath" I/O, and that capability is included in this driver. o WarpDrive functionality has been removed, since it isn't supported in the 12Gb driver interface. o The Scatter/Gather list handling code is significantly different between the 6Gb and 12Gb hardware. The 12Gb boards support IEEE Scatter/Gather lists. Thanks to LSI for developing and testing this driver for FreeBSD. share/man/man4/mpr.4: mpr(4) man page. sys/dev/mpr/*: mpr(4) driver files. sys/modules/Makefile, sys/modules/mpr/Makefile: Add a module Makefile for the mpr(4) driver. sys/conf/files: Add the mpr(4) driver. sys/amd64/conf/GENERIC, sys/i386/conf/GENERIC, sys/mips/conf/OCTEON1, sys/sparc64/conf/GENERIC: Add the mpr(4) driver to all config files that currently have the mps(4) driver. sys/ia64/conf/GENERIC: Add the mps(4) and mpr(4) drivers to the ia64 GENERIC config file. sys/i386/conf/XEN: Exclude the mpr module from building here. Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> Tested by: Chris Reeves <chrisr@spectralogic.com> Sponsored by: LSI, Spectra Logic Relnotes: LSI 12Gb SAS driver mpr(4) added ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265237 | ken | 2014-05-02 14:36:20 -0600 (Fri, 02 May 2014) | 8 lines Add the mpr(4) man page to the man4 Makefile. This should have been included in r265236. Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> MFC after: 3 days Sponsored by: LSI, Spectra Logic ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265241 | brueffer | 2014-05-02 15:14:28 -0600 (Fri, 02 May 2014) | 2 lines Use our standard SYNOPSIS wording; perform some cleanup while here. ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265261 | brueffer | 2014-05-03 05:15:28 -0600 (Sat, 03 May 2014) | 2 lines Add a missing colon. ------------------------------------------------------------------------ Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> Tested by: Chris Reeves <chrisr@spectralogic.com> Sponsored by: LSI, Spectra Logic Relnotes: LSI 12Gb SAS driver mpr(4) added diff 265388 Mon May 05 20:43:36 MDT 2014 ken MFC the mpr(4) driver for LSI's 12Gb SAS cards. This includes r265236, r265237, r265241 and r265261: ------------------------------------------------------------------------ r265236 | ken | 2014-05-02 14:25:09 -0600 (Fri, 02 May 2014) | 51 lines Bring in the mpr(4) driver for LSI's MPT3 12Gb SAS controllers. This is derived from the mps(4) driver, but it supports only the 12Gb IT and IR hardware including the SAS 3004, SAS 3008 and SAS 3108. Some notes about this driver: o The 12Gb hardware can do "FastPath" I/O, and that capability is included in this driver. o WarpDrive functionality has been removed, since it isn't supported in the 12Gb driver interface. o The Scatter/Gather list handling code is significantly different between the 6Gb and 12Gb hardware. The 12Gb boards support IEEE Scatter/Gather lists. Thanks to LSI for developing and testing this driver for FreeBSD. share/man/man4/mpr.4: mpr(4) man page. sys/dev/mpr/*: mpr(4) driver files. sys/modules/Makefile, sys/modules/mpr/Makefile: Add a module Makefile for the mpr(4) driver. sys/conf/files: Add the mpr(4) driver. sys/amd64/conf/GENERIC, sys/i386/conf/GENERIC, sys/mips/conf/OCTEON1, sys/sparc64/conf/GENERIC: Add the mpr(4) driver to all config files that currently have the mps(4) driver. sys/ia64/conf/GENERIC: Add the mps(4) and mpr(4) drivers to the ia64 GENERIC config file. sys/i386/conf/XEN: Exclude the mpr module from building here. Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> Tested by: Chris Reeves <chrisr@spectralogic.com> Sponsored by: LSI, Spectra Logic Relnotes: LSI 12Gb SAS driver mpr(4) added ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265237 | ken | 2014-05-02 14:36:20 -0600 (Fri, 02 May 2014) | 8 lines Add the mpr(4) man page to the man4 Makefile. This should have been included in r265236. Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> MFC after: 3 days Sponsored by: LSI, Spectra Logic ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265241 | brueffer | 2014-05-02 15:14:28 -0600 (Fri, 02 May 2014) | 2 lines Use our standard SYNOPSIS wording; perform some cleanup while here. ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265261 | brueffer | 2014-05-03 05:15:28 -0600 (Sat, 03 May 2014) | 2 lines Add a missing colon. ------------------------------------------------------------------------ Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> Tested by: Chris Reeves <chrisr@spectralogic.com> Sponsored by: LSI, Spectra Logic Relnotes: LSI 12Gb SAS driver mpr(4) added diff 265388 Mon May 05 20:43:36 MDT 2014 ken MFC the mpr(4) driver for LSI's 12Gb SAS cards. This includes r265236, r265237, r265241 and r265261: ------------------------------------------------------------------------ r265236 | ken | 2014-05-02 14:25:09 -0600 (Fri, 02 May 2014) | 51 lines Bring in the mpr(4) driver for LSI's MPT3 12Gb SAS controllers. This is derived from the mps(4) driver, but it supports only the 12Gb IT and IR hardware including the SAS 3004, SAS 3008 and SAS 3108. Some notes about this driver: o The 12Gb hardware can do "FastPath" I/O, and that capability is included in this driver. o WarpDrive functionality has been removed, since it isn't supported in the 12Gb driver interface. o The Scatter/Gather list handling code is significantly different between the 6Gb and 12Gb hardware. The 12Gb boards support IEEE Scatter/Gather lists. Thanks to LSI for developing and testing this driver for FreeBSD. share/man/man4/mpr.4: mpr(4) man page. sys/dev/mpr/*: mpr(4) driver files. sys/modules/Makefile, sys/modules/mpr/Makefile: Add a module Makefile for the mpr(4) driver. sys/conf/files: Add the mpr(4) driver. sys/amd64/conf/GENERIC, sys/i386/conf/GENERIC, sys/mips/conf/OCTEON1, sys/sparc64/conf/GENERIC: Add the mpr(4) driver to all config files that currently have the mps(4) driver. sys/ia64/conf/GENERIC: Add the mps(4) and mpr(4) drivers to the ia64 GENERIC config file. sys/i386/conf/XEN: Exclude the mpr module from building here. Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> Tested by: Chris Reeves <chrisr@spectralogic.com> Sponsored by: LSI, Spectra Logic Relnotes: LSI 12Gb SAS driver mpr(4) added ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265237 | ken | 2014-05-02 14:36:20 -0600 (Fri, 02 May 2014) | 8 lines Add the mpr(4) man page to the man4 Makefile. This should have been included in r265236. Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> MFC after: 3 days Sponsored by: LSI, Spectra Logic ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265241 | brueffer | 2014-05-02 15:14:28 -0600 (Fri, 02 May 2014) | 2 lines Use our standard SYNOPSIS wording; perform some cleanup while here. ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265261 | brueffer | 2014-05-03 05:15:28 -0600 (Sat, 03 May 2014) | 2 lines Add a missing colon. ------------------------------------------------------------------------ Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> Tested by: Chris Reeves <chrisr@spectralogic.com> Sponsored by: LSI, Spectra Logic Relnotes: LSI 12Gb SAS driver mpr(4) added diff 265388 Mon May 05 20:43:36 MDT 2014 ken MFC the mpr(4) driver for LSI's 12Gb SAS cards. This includes r265236, r265237, r265241 and r265261: ------------------------------------------------------------------------ r265236 | ken | 2014-05-02 14:25:09 -0600 (Fri, 02 May 2014) | 51 lines Bring in the mpr(4) driver for LSI's MPT3 12Gb SAS controllers. This is derived from the mps(4) driver, but it supports only the 12Gb IT and IR hardware including the SAS 3004, SAS 3008 and SAS 3108. Some notes about this driver: o The 12Gb hardware can do "FastPath" I/O, and that capability is included in this driver. o WarpDrive functionality has been removed, since it isn't supported in the 12Gb driver interface. o The Scatter/Gather list handling code is significantly different between the 6Gb and 12Gb hardware. The 12Gb boards support IEEE Scatter/Gather lists. Thanks to LSI for developing and testing this driver for FreeBSD. share/man/man4/mpr.4: mpr(4) man page. sys/dev/mpr/*: mpr(4) driver files. sys/modules/Makefile, sys/modules/mpr/Makefile: Add a module Makefile for the mpr(4) driver. sys/conf/files: Add the mpr(4) driver. sys/amd64/conf/GENERIC, sys/i386/conf/GENERIC, sys/mips/conf/OCTEON1, sys/sparc64/conf/GENERIC: Add the mpr(4) driver to all config files that currently have the mps(4) driver. sys/ia64/conf/GENERIC: Add the mps(4) and mpr(4) drivers to the ia64 GENERIC config file. sys/i386/conf/XEN: Exclude the mpr module from building here. Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> Tested by: Chris Reeves <chrisr@spectralogic.com> Sponsored by: LSI, Spectra Logic Relnotes: LSI 12Gb SAS driver mpr(4) added ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265237 | ken | 2014-05-02 14:36:20 -0600 (Fri, 02 May 2014) | 8 lines Add the mpr(4) man page to the man4 Makefile. This should have been included in r265236. Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> MFC after: 3 days Sponsored by: LSI, Spectra Logic ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265241 | brueffer | 2014-05-02 15:14:28 -0600 (Fri, 02 May 2014) | 2 lines Use our standard SYNOPSIS wording; perform some cleanup while here. ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265261 | brueffer | 2014-05-03 05:15:28 -0600 (Sat, 03 May 2014) | 2 lines Add a missing colon. ------------------------------------------------------------------------ Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> Tested by: Chris Reeves <chrisr@spectralogic.com> Sponsored by: LSI, Spectra Logic Relnotes: LSI 12Gb SAS driver mpr(4) added diff 265388 Mon May 05 20:43:36 MDT 2014 ken MFC the mpr(4) driver for LSI's 12Gb SAS cards. This includes r265236, r265237, r265241 and r265261: ------------------------------------------------------------------------ r265236 | ken | 2014-05-02 14:25:09 -0600 (Fri, 02 May 2014) | 51 lines Bring in the mpr(4) driver for LSI's MPT3 12Gb SAS controllers. This is derived from the mps(4) driver, but it supports only the 12Gb IT and IR hardware including the SAS 3004, SAS 3008 and SAS 3108. Some notes about this driver: o The 12Gb hardware can do "FastPath" I/O, and that capability is included in this driver. o WarpDrive functionality has been removed, since it isn't supported in the 12Gb driver interface. o The Scatter/Gather list handling code is significantly different between the 6Gb and 12Gb hardware. The 12Gb boards support IEEE Scatter/Gather lists. Thanks to LSI for developing and testing this driver for FreeBSD. share/man/man4/mpr.4: mpr(4) man page. sys/dev/mpr/*: mpr(4) driver files. sys/modules/Makefile, sys/modules/mpr/Makefile: Add a module Makefile for the mpr(4) driver. sys/conf/files: Add the mpr(4) driver. sys/amd64/conf/GENERIC, sys/i386/conf/GENERIC, sys/mips/conf/OCTEON1, sys/sparc64/conf/GENERIC: Add the mpr(4) driver to all config files that currently have the mps(4) driver. sys/ia64/conf/GENERIC: Add the mps(4) and mpr(4) drivers to the ia64 GENERIC config file. sys/i386/conf/XEN: Exclude the mpr module from building here. Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> Tested by: Chris Reeves <chrisr@spectralogic.com> Sponsored by: LSI, Spectra Logic Relnotes: LSI 12Gb SAS driver mpr(4) added ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265237 | ken | 2014-05-02 14:36:20 -0600 (Fri, 02 May 2014) | 8 lines Add the mpr(4) man page to the man4 Makefile. This should have been included in r265236. Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> MFC after: 3 days Sponsored by: LSI, Spectra Logic ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265241 | brueffer | 2014-05-02 15:14:28 -0600 (Fri, 02 May 2014) | 2 lines Use our standard SYNOPSIS wording; perform some cleanup while here. ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265261 | brueffer | 2014-05-03 05:15:28 -0600 (Sat, 03 May 2014) | 2 lines Add a missing colon. ------------------------------------------------------------------------ Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> Tested by: Chris Reeves <chrisr@spectralogic.com> Sponsored by: LSI, Spectra Logic Relnotes: LSI 12Gb SAS driver mpr(4) added diff 265388 Mon May 05 20:43:36 MDT 2014 ken MFC the mpr(4) driver for LSI's 12Gb SAS cards. This includes r265236, r265237, r265241 and r265261: ------------------------------------------------------------------------ r265236 | ken | 2014-05-02 14:25:09 -0600 (Fri, 02 May 2014) | 51 lines Bring in the mpr(4) driver for LSI's MPT3 12Gb SAS controllers. This is derived from the mps(4) driver, but it supports only the 12Gb IT and IR hardware including the SAS 3004, SAS 3008 and SAS 3108. Some notes about this driver: o The 12Gb hardware can do "FastPath" I/O, and that capability is included in this driver. o WarpDrive functionality has been removed, since it isn't supported in the 12Gb driver interface. o The Scatter/Gather list handling code is significantly different between the 6Gb and 12Gb hardware. The 12Gb boards support IEEE Scatter/Gather lists. Thanks to LSI for developing and testing this driver for FreeBSD. share/man/man4/mpr.4: mpr(4) man page. sys/dev/mpr/*: mpr(4) driver files. sys/modules/Makefile, sys/modules/mpr/Makefile: Add a module Makefile for the mpr(4) driver. sys/conf/files: Add the mpr(4) driver. sys/amd64/conf/GENERIC, sys/i386/conf/GENERIC, sys/mips/conf/OCTEON1, sys/sparc64/conf/GENERIC: Add the mpr(4) driver to all config files that currently have the mps(4) driver. sys/ia64/conf/GENERIC: Add the mps(4) and mpr(4) drivers to the ia64 GENERIC config file. sys/i386/conf/XEN: Exclude the mpr module from building here. Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> Tested by: Chris Reeves <chrisr@spectralogic.com> Sponsored by: LSI, Spectra Logic Relnotes: LSI 12Gb SAS driver mpr(4) added ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265237 | ken | 2014-05-02 14:36:20 -0600 (Fri, 02 May 2014) | 8 lines Add the mpr(4) man page to the man4 Makefile. This should have been included in r265236. Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> MFC after: 3 days Sponsored by: LSI, Spectra Logic ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265241 | brueffer | 2014-05-02 15:14:28 -0600 (Fri, 02 May 2014) | 2 lines Use our standard SYNOPSIS wording; perform some cleanup while here. ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265261 | brueffer | 2014-05-03 05:15:28 -0600 (Sat, 03 May 2014) | 2 lines Add a missing colon. ------------------------------------------------------------------------ Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> Tested by: Chris Reeves <chrisr@spectralogic.com> Sponsored by: LSI, Spectra Logic Relnotes: LSI 12Gb SAS driver mpr(4) added diff 265388 Mon May 05 20:43:36 MDT 2014 ken MFC the mpr(4) driver for LSI's 12Gb SAS cards. This includes r265236, r265237, r265241 and r265261: ------------------------------------------------------------------------ r265236 | ken | 2014-05-02 14:25:09 -0600 (Fri, 02 May 2014) | 51 lines Bring in the mpr(4) driver for LSI's MPT3 12Gb SAS controllers. This is derived from the mps(4) driver, but it supports only the 12Gb IT and IR hardware including the SAS 3004, SAS 3008 and SAS 3108. Some notes about this driver: o The 12Gb hardware can do "FastPath" I/O, and that capability is included in this driver. o WarpDrive functionality has been removed, since it isn't supported in the 12Gb driver interface. o The Scatter/Gather list handling code is significantly different between the 6Gb and 12Gb hardware. The 12Gb boards support IEEE Scatter/Gather lists. Thanks to LSI for developing and testing this driver for FreeBSD. share/man/man4/mpr.4: mpr(4) man page. sys/dev/mpr/*: mpr(4) driver files. sys/modules/Makefile, sys/modules/mpr/Makefile: Add a module Makefile for the mpr(4) driver. sys/conf/files: Add the mpr(4) driver. sys/amd64/conf/GENERIC, sys/i386/conf/GENERIC, sys/mips/conf/OCTEON1, sys/sparc64/conf/GENERIC: Add the mpr(4) driver to all config files that currently have the mps(4) driver. sys/ia64/conf/GENERIC: Add the mps(4) and mpr(4) drivers to the ia64 GENERIC config file. sys/i386/conf/XEN: Exclude the mpr module from building here. Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> Tested by: Chris Reeves <chrisr@spectralogic.com> Sponsored by: LSI, Spectra Logic Relnotes: LSI 12Gb SAS driver mpr(4) added ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265237 | ken | 2014-05-02 14:36:20 -0600 (Fri, 02 May 2014) | 8 lines Add the mpr(4) man page to the man4 Makefile. This should have been included in r265236. Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> MFC after: 3 days Sponsored by: LSI, Spectra Logic ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265241 | brueffer | 2014-05-02 15:14:28 -0600 (Fri, 02 May 2014) | 2 lines Use our standard SYNOPSIS wording; perform some cleanup while here. ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265261 | brueffer | 2014-05-03 05:15:28 -0600 (Sat, 03 May 2014) | 2 lines Add a missing colon. ------------------------------------------------------------------------ Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> Tested by: Chris Reeves <chrisr@spectralogic.com> Sponsored by: LSI, Spectra Logic Relnotes: LSI 12Gb SAS driver mpr(4) added diff 265388 Mon May 05 20:43:36 MDT 2014 ken MFC the mpr(4) driver for LSI's 12Gb SAS cards. This includes r265236, r265237, r265241 and r265261: ------------------------------------------------------------------------ r265236 | ken | 2014-05-02 14:25:09 -0600 (Fri, 02 May 2014) | 51 lines Bring in the mpr(4) driver for LSI's MPT3 12Gb SAS controllers. This is derived from the mps(4) driver, but it supports only the 12Gb IT and IR hardware including the SAS 3004, SAS 3008 and SAS 3108. Some notes about this driver: o The 12Gb hardware can do "FastPath" I/O, and that capability is included in this driver. o WarpDrive functionality has been removed, since it isn't supported in the 12Gb driver interface. o The Scatter/Gather list handling code is significantly different between the 6Gb and 12Gb hardware. The 12Gb boards support IEEE Scatter/Gather lists. Thanks to LSI for developing and testing this driver for FreeBSD. share/man/man4/mpr.4: mpr(4) man page. sys/dev/mpr/*: mpr(4) driver files. sys/modules/Makefile, sys/modules/mpr/Makefile: Add a module Makefile for the mpr(4) driver. sys/conf/files: Add the mpr(4) driver. sys/amd64/conf/GENERIC, sys/i386/conf/GENERIC, sys/mips/conf/OCTEON1, sys/sparc64/conf/GENERIC: Add the mpr(4) driver to all config files that currently have the mps(4) driver. sys/ia64/conf/GENERIC: Add the mps(4) and mpr(4) drivers to the ia64 GENERIC config file. sys/i386/conf/XEN: Exclude the mpr module from building here. Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> Tested by: Chris Reeves <chrisr@spectralogic.com> Sponsored by: LSI, Spectra Logic Relnotes: LSI 12Gb SAS driver mpr(4) added ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265237 | ken | 2014-05-02 14:36:20 -0600 (Fri, 02 May 2014) | 8 lines Add the mpr(4) man page to the man4 Makefile. This should have been included in r265236. Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> MFC after: 3 days Sponsored by: LSI, Spectra Logic ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265241 | brueffer | 2014-05-02 15:14:28 -0600 (Fri, 02 May 2014) | 2 lines Use our standard SYNOPSIS wording; perform some cleanup while here. ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265261 | brueffer | 2014-05-03 05:15:28 -0600 (Sat, 03 May 2014) | 2 lines Add a missing colon. ------------------------------------------------------------------------ Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> Tested by: Chris Reeves <chrisr@spectralogic.com> Sponsored by: LSI, Spectra Logic Relnotes: LSI 12Gb SAS driver mpr(4) added diff 265388 Mon May 05 20:43:36 MDT 2014 ken MFC the mpr(4) driver for LSI's 12Gb SAS cards. This includes r265236, r265237, r265241 and r265261: ------------------------------------------------------------------------ r265236 | ken | 2014-05-02 14:25:09 -0600 (Fri, 02 May 2014) | 51 lines Bring in the mpr(4) driver for LSI's MPT3 12Gb SAS controllers. This is derived from the mps(4) driver, but it supports only the 12Gb IT and IR hardware including the SAS 3004, SAS 3008 and SAS 3108. Some notes about this driver: o The 12Gb hardware can do "FastPath" I/O, and that capability is included in this driver. o WarpDrive functionality has been removed, since it isn't supported in the 12Gb driver interface. o The Scatter/Gather list handling code is significantly different between the 6Gb and 12Gb hardware. The 12Gb boards support IEEE Scatter/Gather lists. Thanks to LSI for developing and testing this driver for FreeBSD. share/man/man4/mpr.4: mpr(4) man page. sys/dev/mpr/*: mpr(4) driver files. sys/modules/Makefile, sys/modules/mpr/Makefile: Add a module Makefile for the mpr(4) driver. sys/conf/files: Add the mpr(4) driver. sys/amd64/conf/GENERIC, sys/i386/conf/GENERIC, sys/mips/conf/OCTEON1, sys/sparc64/conf/GENERIC: Add the mpr(4) driver to all config files that currently have the mps(4) driver. sys/ia64/conf/GENERIC: Add the mps(4) and mpr(4) drivers to the ia64 GENERIC config file. sys/i386/conf/XEN: Exclude the mpr module from building here. Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> Tested by: Chris Reeves <chrisr@spectralogic.com> Sponsored by: LSI, Spectra Logic Relnotes: LSI 12Gb SAS driver mpr(4) added ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265237 | ken | 2014-05-02 14:36:20 -0600 (Fri, 02 May 2014) | 8 lines Add the mpr(4) man page to the man4 Makefile. This should have been included in r265236. Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> MFC after: 3 days Sponsored by: LSI, Spectra Logic ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265241 | brueffer | 2014-05-02 15:14:28 -0600 (Fri, 02 May 2014) | 2 lines Use our standard SYNOPSIS wording; perform some cleanup while here. ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265261 | brueffer | 2014-05-03 05:15:28 -0600 (Sat, 03 May 2014) | 2 lines Add a missing colon. ------------------------------------------------------------------------ Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> Tested by: Chris Reeves <chrisr@spectralogic.com> Sponsored by: LSI, Spectra Logic Relnotes: LSI 12Gb SAS driver mpr(4) added diff 265388 Mon May 05 20:43:36 MDT 2014 ken MFC the mpr(4) driver for LSI's 12Gb SAS cards. This includes r265236, r265237, r265241 and r265261: ------------------------------------------------------------------------ r265236 | ken | 2014-05-02 14:25:09 -0600 (Fri, 02 May 2014) | 51 lines Bring in the mpr(4) driver for LSI's MPT3 12Gb SAS controllers. This is derived from the mps(4) driver, but it supports only the 12Gb IT and IR hardware including the SAS 3004, SAS 3008 and SAS 3108. Some notes about this driver: o The 12Gb hardware can do "FastPath" I/O, and that capability is included in this driver. o WarpDrive functionality has been removed, since it isn't supported in the 12Gb driver interface. o The Scatter/Gather list handling code is significantly different between the 6Gb and 12Gb hardware. The 12Gb boards support IEEE Scatter/Gather lists. Thanks to LSI for developing and testing this driver for FreeBSD. share/man/man4/mpr.4: mpr(4) man page. sys/dev/mpr/*: mpr(4) driver files. sys/modules/Makefile, sys/modules/mpr/Makefile: Add a module Makefile for the mpr(4) driver. sys/conf/files: Add the mpr(4) driver. sys/amd64/conf/GENERIC, sys/i386/conf/GENERIC, sys/mips/conf/OCTEON1, sys/sparc64/conf/GENERIC: Add the mpr(4) driver to all config files that currently have the mps(4) driver. sys/ia64/conf/GENERIC: Add the mps(4) and mpr(4) drivers to the ia64 GENERIC config file. sys/i386/conf/XEN: Exclude the mpr module from building here. Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> Tested by: Chris Reeves <chrisr@spectralogic.com> Sponsored by: LSI, Spectra Logic Relnotes: LSI 12Gb SAS driver mpr(4) added ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265237 | ken | 2014-05-02 14:36:20 -0600 (Fri, 02 May 2014) | 8 lines Add the mpr(4) man page to the man4 Makefile. This should have been included in r265236. Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> MFC after: 3 days Sponsored by: LSI, Spectra Logic ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265241 | brueffer | 2014-05-02 15:14:28 -0600 (Fri, 02 May 2014) | 2 lines Use our standard SYNOPSIS wording; perform some cleanup while here. ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265261 | brueffer | 2014-05-03 05:15:28 -0600 (Sat, 03 May 2014) | 2 lines Add a missing colon. ------------------------------------------------------------------------ Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> Tested by: Chris Reeves <chrisr@spectralogic.com> Sponsored by: LSI, Spectra Logic Relnotes: LSI 12Gb SAS driver mpr(4) added diff 265388 Mon May 05 20:43:36 MDT 2014 ken MFC the mpr(4) driver for LSI's 12Gb SAS cards. This includes r265236, r265237, r265241 and r265261: ------------------------------------------------------------------------ r265236 | ken | 2014-05-02 14:25:09 -0600 (Fri, 02 May 2014) | 51 lines Bring in the mpr(4) driver for LSI's MPT3 12Gb SAS controllers. This is derived from the mps(4) driver, but it supports only the 12Gb IT and IR hardware including the SAS 3004, SAS 3008 and SAS 3108. Some notes about this driver: o The 12Gb hardware can do "FastPath" I/O, and that capability is included in this driver. o WarpDrive functionality has been removed, since it isn't supported in the 12Gb driver interface. o The Scatter/Gather list handling code is significantly different between the 6Gb and 12Gb hardware. The 12Gb boards support IEEE Scatter/Gather lists. Thanks to LSI for developing and testing this driver for FreeBSD. share/man/man4/mpr.4: mpr(4) man page. sys/dev/mpr/*: mpr(4) driver files. sys/modules/Makefile, sys/modules/mpr/Makefile: Add a module Makefile for the mpr(4) driver. sys/conf/files: Add the mpr(4) driver. sys/amd64/conf/GENERIC, sys/i386/conf/GENERIC, sys/mips/conf/OCTEON1, sys/sparc64/conf/GENERIC: Add the mpr(4) driver to all config files that currently have the mps(4) driver. sys/ia64/conf/GENERIC: Add the mps(4) and mpr(4) drivers to the ia64 GENERIC config file. sys/i386/conf/XEN: Exclude the mpr module from building here. Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> Tested by: Chris Reeves <chrisr@spectralogic.com> Sponsored by: LSI, Spectra Logic Relnotes: LSI 12Gb SAS driver mpr(4) added ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265237 | ken | 2014-05-02 14:36:20 -0600 (Fri, 02 May 2014) | 8 lines Add the mpr(4) man page to the man4 Makefile. This should have been included in r265236. Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> MFC after: 3 days Sponsored by: LSI, Spectra Logic ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265241 | brueffer | 2014-05-02 15:14:28 -0600 (Fri, 02 May 2014) | 2 lines Use our standard SYNOPSIS wording; perform some cleanup while here. ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265261 | brueffer | 2014-05-03 05:15:28 -0600 (Sat, 03 May 2014) | 2 lines Add a missing colon. ------------------------------------------------------------------------ Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> Tested by: Chris Reeves <chrisr@spectralogic.com> Sponsored by: LSI, Spectra Logic Relnotes: LSI 12Gb SAS driver mpr(4) added diff 265388 Mon May 05 20:43:36 MDT 2014 ken MFC the mpr(4) driver for LSI's 12Gb SAS cards. This includes r265236, r265237, r265241 and r265261: ------------------------------------------------------------------------ r265236 | ken | 2014-05-02 14:25:09 -0600 (Fri, 02 May 2014) | 51 lines Bring in the mpr(4) driver for LSI's MPT3 12Gb SAS controllers. This is derived from the mps(4) driver, but it supports only the 12Gb IT and IR hardware including the SAS 3004, SAS 3008 and SAS 3108. Some notes about this driver: o The 12Gb hardware can do "FastPath" I/O, and that capability is included in this driver. o WarpDrive functionality has been removed, since it isn't supported in the 12Gb driver interface. o The Scatter/Gather list handling code is significantly different between the 6Gb and 12Gb hardware. The 12Gb boards support IEEE Scatter/Gather lists. Thanks to LSI for developing and testing this driver for FreeBSD. share/man/man4/mpr.4: mpr(4) man page. sys/dev/mpr/*: mpr(4) driver files. sys/modules/Makefile, sys/modules/mpr/Makefile: Add a module Makefile for the mpr(4) driver. sys/conf/files: Add the mpr(4) driver. sys/amd64/conf/GENERIC, sys/i386/conf/GENERIC, sys/mips/conf/OCTEON1, sys/sparc64/conf/GENERIC: Add the mpr(4) driver to all config files that currently have the mps(4) driver. sys/ia64/conf/GENERIC: Add the mps(4) and mpr(4) drivers to the ia64 GENERIC config file. sys/i386/conf/XEN: Exclude the mpr module from building here. Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> Tested by: Chris Reeves <chrisr@spectralogic.com> Sponsored by: LSI, Spectra Logic Relnotes: LSI 12Gb SAS driver mpr(4) added ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265237 | ken | 2014-05-02 14:36:20 -0600 (Fri, 02 May 2014) | 8 lines Add the mpr(4) man page to the man4 Makefile. This should have been included in r265236. Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> MFC after: 3 days Sponsored by: LSI, Spectra Logic ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265241 | brueffer | 2014-05-02 15:14:28 -0600 (Fri, 02 May 2014) | 2 lines Use our standard SYNOPSIS wording; perform some cleanup while here. ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265261 | brueffer | 2014-05-03 05:15:28 -0600 (Sat, 03 May 2014) | 2 lines Add a missing colon. ------------------------------------------------------------------------ Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> Tested by: Chris Reeves <chrisr@spectralogic.com> Sponsored by: LSI, Spectra Logic Relnotes: LSI 12Gb SAS driver mpr(4) added diff 265388 Mon May 05 20:43:36 MDT 2014 ken MFC the mpr(4) driver for LSI's 12Gb SAS cards. This includes r265236, r265237, r265241 and r265261: ------------------------------------------------------------------------ r265236 | ken | 2014-05-02 14:25:09 -0600 (Fri, 02 May 2014) | 51 lines Bring in the mpr(4) driver for LSI's MPT3 12Gb SAS controllers. This is derived from the mps(4) driver, but it supports only the 12Gb IT and IR hardware including the SAS 3004, SAS 3008 and SAS 3108. Some notes about this driver: o The 12Gb hardware can do "FastPath" I/O, and that capability is included in this driver. o WarpDrive functionality has been removed, since it isn't supported in the 12Gb driver interface. o The Scatter/Gather list handling code is significantly different between the 6Gb and 12Gb hardware. The 12Gb boards support IEEE Scatter/Gather lists. Thanks to LSI for developing and testing this driver for FreeBSD. share/man/man4/mpr.4: mpr(4) man page. sys/dev/mpr/*: mpr(4) driver files. sys/modules/Makefile, sys/modules/mpr/Makefile: Add a module Makefile for the mpr(4) driver. sys/conf/files: Add the mpr(4) driver. sys/amd64/conf/GENERIC, sys/i386/conf/GENERIC, sys/mips/conf/OCTEON1, sys/sparc64/conf/GENERIC: Add the mpr(4) driver to all config files that currently have the mps(4) driver. sys/ia64/conf/GENERIC: Add the mps(4) and mpr(4) drivers to the ia64 GENERIC config file. sys/i386/conf/XEN: Exclude the mpr module from building here. Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> Tested by: Chris Reeves <chrisr@spectralogic.com> Sponsored by: LSI, Spectra Logic Relnotes: LSI 12Gb SAS driver mpr(4) added ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265237 | ken | 2014-05-02 14:36:20 -0600 (Fri, 02 May 2014) | 8 lines Add the mpr(4) man page to the man4 Makefile. This should have been included in r265236. Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> MFC after: 3 days Sponsored by: LSI, Spectra Logic ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265241 | brueffer | 2014-05-02 15:14:28 -0600 (Fri, 02 May 2014) | 2 lines Use our standard SYNOPSIS wording; perform some cleanup while here. ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265261 | brueffer | 2014-05-03 05:15:28 -0600 (Sat, 03 May 2014) | 2 lines Add a missing colon. ------------------------------------------------------------------------ Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> Tested by: Chris Reeves <chrisr@spectralogic.com> Sponsored by: LSI, Spectra Logic Relnotes: LSI 12Gb SAS driver mpr(4) added diff 265388 Mon May 05 20:43:36 MDT 2014 ken MFC the mpr(4) driver for LSI's 12Gb SAS cards. This includes r265236, r265237, r265241 and r265261: ------------------------------------------------------------------------ r265236 | ken | 2014-05-02 14:25:09 -0600 (Fri, 02 May 2014) | 51 lines Bring in the mpr(4) driver for LSI's MPT3 12Gb SAS controllers. This is derived from the mps(4) driver, but it supports only the 12Gb IT and IR hardware including the SAS 3004, SAS 3008 and SAS 3108. Some notes about this driver: o The 12Gb hardware can do "FastPath" I/O, and that capability is included in this driver. o WarpDrive functionality has been removed, since it isn't supported in the 12Gb driver interface. o The Scatter/Gather list handling code is significantly different between the 6Gb and 12Gb hardware. The 12Gb boards support IEEE Scatter/Gather lists. Thanks to LSI for developing and testing this driver for FreeBSD. share/man/man4/mpr.4: mpr(4) man page. sys/dev/mpr/*: mpr(4) driver files. sys/modules/Makefile, sys/modules/mpr/Makefile: Add a module Makefile for the mpr(4) driver. sys/conf/files: Add the mpr(4) driver. sys/amd64/conf/GENERIC, sys/i386/conf/GENERIC, sys/mips/conf/OCTEON1, sys/sparc64/conf/GENERIC: Add the mpr(4) driver to all config files that currently have the mps(4) driver. sys/ia64/conf/GENERIC: Add the mps(4) and mpr(4) drivers to the ia64 GENERIC config file. sys/i386/conf/XEN: Exclude the mpr module from building here. Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> Tested by: Chris Reeves <chrisr@spectralogic.com> Sponsored by: LSI, Spectra Logic Relnotes: LSI 12Gb SAS driver mpr(4) added ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265237 | ken | 2014-05-02 14:36:20 -0600 (Fri, 02 May 2014) | 8 lines Add the mpr(4) man page to the man4 Makefile. This should have been included in r265236. Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> MFC after: 3 days Sponsored by: LSI, Spectra Logic ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265241 | brueffer | 2014-05-02 15:14:28 -0600 (Fri, 02 May 2014) | 2 lines Use our standard SYNOPSIS wording; perform some cleanup while here. ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265261 | brueffer | 2014-05-03 05:15:28 -0600 (Sat, 03 May 2014) | 2 lines Add a missing colon. ------------------------------------------------------------------------ Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> Tested by: Chris Reeves <chrisr@spectralogic.com> Sponsored by: LSI, Spectra Logic Relnotes: LSI 12Gb SAS driver mpr(4) added diff 265388 Mon May 05 20:43:36 MDT 2014 ken MFC the mpr(4) driver for LSI's 12Gb SAS cards. This includes r265236, r265237, r265241 and r265261: ------------------------------------------------------------------------ r265236 | ken | 2014-05-02 14:25:09 -0600 (Fri, 02 May 2014) | 51 lines Bring in the mpr(4) driver for LSI's MPT3 12Gb SAS controllers. This is derived from the mps(4) driver, but it supports only the 12Gb IT and IR hardware including the SAS 3004, SAS 3008 and SAS 3108. Some notes about this driver: o The 12Gb hardware can do "FastPath" I/O, and that capability is included in this driver. o WarpDrive functionality has been removed, since it isn't supported in the 12Gb driver interface. o The Scatter/Gather list handling code is significantly different between the 6Gb and 12Gb hardware. The 12Gb boards support IEEE Scatter/Gather lists. Thanks to LSI for developing and testing this driver for FreeBSD. share/man/man4/mpr.4: mpr(4) man page. sys/dev/mpr/*: mpr(4) driver files. sys/modules/Makefile, sys/modules/mpr/Makefile: Add a module Makefile for the mpr(4) driver. sys/conf/files: Add the mpr(4) driver. sys/amd64/conf/GENERIC, sys/i386/conf/GENERIC, sys/mips/conf/OCTEON1, sys/sparc64/conf/GENERIC: Add the mpr(4) driver to all config files that currently have the mps(4) driver. sys/ia64/conf/GENERIC: Add the mps(4) and mpr(4) drivers to the ia64 GENERIC config file. sys/i386/conf/XEN: Exclude the mpr module from building here. Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> Tested by: Chris Reeves <chrisr@spectralogic.com> Sponsored by: LSI, Spectra Logic Relnotes: LSI 12Gb SAS driver mpr(4) added ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265237 | ken | 2014-05-02 14:36:20 -0600 (Fri, 02 May 2014) | 8 lines Add the mpr(4) man page to the man4 Makefile. This should have been included in r265236. Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> MFC after: 3 days Sponsored by: LSI, Spectra Logic ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265241 | brueffer | 2014-05-02 15:14:28 -0600 (Fri, 02 May 2014) | 2 lines Use our standard SYNOPSIS wording; perform some cleanup while here. ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265261 | brueffer | 2014-05-03 05:15:28 -0600 (Sat, 03 May 2014) | 2 lines Add a missing colon. ------------------------------------------------------------------------ Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> Tested by: Chris Reeves <chrisr@spectralogic.com> Sponsored by: LSI, Spectra Logic Relnotes: LSI 12Gb SAS driver mpr(4) added |
| H A D | mpi2_ioc.h | diff 265388 Mon May 05 20:43:36 MDT 2014 ken MFC the mpr(4) driver for LSI's 12Gb SAS cards. This includes r265236, r265237, r265241 and r265261: ------------------------------------------------------------------------ r265236 | ken | 2014-05-02 14:25:09 -0600 (Fri, 02 May 2014) | 51 lines Bring in the mpr(4) driver for LSI's MPT3 12Gb SAS controllers. This is derived from the mps(4) driver, but it supports only the 12Gb IT and IR hardware including the SAS 3004, SAS 3008 and SAS 3108. Some notes about this driver: o The 12Gb hardware can do "FastPath" I/O, and that capability is included in this driver. o WarpDrive functionality has been removed, since it isn't supported in the 12Gb driver interface. o The Scatter/Gather list handling code is significantly different between the 6Gb and 12Gb hardware. The 12Gb boards support IEEE Scatter/Gather lists. Thanks to LSI for developing and testing this driver for FreeBSD. share/man/man4/mpr.4: mpr(4) man page. sys/dev/mpr/*: mpr(4) driver files. sys/modules/Makefile, sys/modules/mpr/Makefile: Add a module Makefile for the mpr(4) driver. sys/conf/files: Add the mpr(4) driver. sys/amd64/conf/GENERIC, sys/i386/conf/GENERIC, sys/mips/conf/OCTEON1, sys/sparc64/conf/GENERIC: Add the mpr(4) driver to all config files that currently have the mps(4) driver. sys/ia64/conf/GENERIC: Add the mps(4) and mpr(4) drivers to the ia64 GENERIC config file. sys/i386/conf/XEN: Exclude the mpr module from building here. Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> Tested by: Chris Reeves <chrisr@spectralogic.com> Sponsored by: LSI, Spectra Logic Relnotes: LSI 12Gb SAS driver mpr(4) added ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265237 | ken | 2014-05-02 14:36:20 -0600 (Fri, 02 May 2014) | 8 lines Add the mpr(4) man page to the man4 Makefile. This should have been included in r265236. Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> MFC after: 3 days Sponsored by: LSI, Spectra Logic ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265241 | brueffer | 2014-05-02 15:14:28 -0600 (Fri, 02 May 2014) | 2 lines Use our standard SYNOPSIS wording; perform some cleanup while here. ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265261 | brueffer | 2014-05-03 05:15:28 -0600 (Sat, 03 May 2014) | 2 lines Add a missing colon. ------------------------------------------------------------------------ Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> Tested by: Chris Reeves <chrisr@spectralogic.com> Sponsored by: LSI, Spectra Logic Relnotes: LSI 12Gb SAS driver mpr(4) added diff 265388 Mon May 05 20:43:36 MDT 2014 ken MFC the mpr(4) driver for LSI's 12Gb SAS cards. This includes r265236, r265237, r265241 and r265261: ------------------------------------------------------------------------ r265236 | ken | 2014-05-02 14:25:09 -0600 (Fri, 02 May 2014) | 51 lines Bring in the mpr(4) driver for LSI's MPT3 12Gb SAS controllers. This is derived from the mps(4) driver, but it supports only the 12Gb IT and IR hardware including the SAS 3004, SAS 3008 and SAS 3108. Some notes about this driver: o The 12Gb hardware can do "FastPath" I/O, and that capability is included in this driver. o WarpDrive functionality has been removed, since it isn't supported in the 12Gb driver interface. o The Scatter/Gather list handling code is significantly different between the 6Gb and 12Gb hardware. The 12Gb boards support IEEE Scatter/Gather lists. Thanks to LSI for developing and testing this driver for FreeBSD. share/man/man4/mpr.4: mpr(4) man page. sys/dev/mpr/*: mpr(4) driver files. sys/modules/Makefile, sys/modules/mpr/Makefile: Add a module Makefile for the mpr(4) driver. sys/conf/files: Add the mpr(4) driver. sys/amd64/conf/GENERIC, sys/i386/conf/GENERIC, sys/mips/conf/OCTEON1, sys/sparc64/conf/GENERIC: Add the mpr(4) driver to all config files that currently have the mps(4) driver. sys/ia64/conf/GENERIC: Add the mps(4) and mpr(4) drivers to the ia64 GENERIC config file. sys/i386/conf/XEN: Exclude the mpr module from building here. Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> Tested by: Chris Reeves <chrisr@spectralogic.com> Sponsored by: LSI, Spectra Logic Relnotes: LSI 12Gb SAS driver mpr(4) added ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265237 | ken | 2014-05-02 14:36:20 -0600 (Fri, 02 May 2014) | 8 lines Add the mpr(4) man page to the man4 Makefile. This should have been included in r265236. Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> MFC after: 3 days Sponsored by: LSI, Spectra Logic ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265241 | brueffer | 2014-05-02 15:14:28 -0600 (Fri, 02 May 2014) | 2 lines Use our standard SYNOPSIS wording; perform some cleanup while here. ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265261 | brueffer | 2014-05-03 05:15:28 -0600 (Sat, 03 May 2014) | 2 lines Add a missing colon. ------------------------------------------------------------------------ Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> Tested by: Chris Reeves <chrisr@spectralogic.com> Sponsored by: LSI, Spectra Logic Relnotes: LSI 12Gb SAS driver mpr(4) added diff 265388 Mon May 05 20:43:36 MDT 2014 ken MFC the mpr(4) driver for LSI's 12Gb SAS cards. This includes r265236, r265237, r265241 and r265261: ------------------------------------------------------------------------ r265236 | ken | 2014-05-02 14:25:09 -0600 (Fri, 02 May 2014) | 51 lines Bring in the mpr(4) driver for LSI's MPT3 12Gb SAS controllers. This is derived from the mps(4) driver, but it supports only the 12Gb IT and IR hardware including the SAS 3004, SAS 3008 and SAS 3108. Some notes about this driver: o The 12Gb hardware can do "FastPath" I/O, and that capability is included in this driver. o WarpDrive functionality has been removed, since it isn't supported in the 12Gb driver interface. o The Scatter/Gather list handling code is significantly different between the 6Gb and 12Gb hardware. The 12Gb boards support IEEE Scatter/Gather lists. Thanks to LSI for developing and testing this driver for FreeBSD. share/man/man4/mpr.4: mpr(4) man page. sys/dev/mpr/*: mpr(4) driver files. sys/modules/Makefile, sys/modules/mpr/Makefile: Add a module Makefile for the mpr(4) driver. sys/conf/files: Add the mpr(4) driver. sys/amd64/conf/GENERIC, sys/i386/conf/GENERIC, sys/mips/conf/OCTEON1, sys/sparc64/conf/GENERIC: Add the mpr(4) driver to all config files that currently have the mps(4) driver. sys/ia64/conf/GENERIC: Add the mps(4) and mpr(4) drivers to the ia64 GENERIC config file. sys/i386/conf/XEN: Exclude the mpr module from building here. Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> Tested by: Chris Reeves <chrisr@spectralogic.com> Sponsored by: LSI, Spectra Logic Relnotes: LSI 12Gb SAS driver mpr(4) added ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265237 | ken | 2014-05-02 14:36:20 -0600 (Fri, 02 May 2014) | 8 lines Add the mpr(4) man page to the man4 Makefile. This should have been included in r265236. Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> MFC after: 3 days Sponsored by: LSI, Spectra Logic ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265241 | brueffer | 2014-05-02 15:14:28 -0600 (Fri, 02 May 2014) | 2 lines Use our standard SYNOPSIS wording; perform some cleanup while here. ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265261 | brueffer | 2014-05-03 05:15:28 -0600 (Sat, 03 May 2014) | 2 lines Add a missing colon. ------------------------------------------------------------------------ Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> Tested by: Chris Reeves <chrisr@spectralogic.com> Sponsored by: LSI, Spectra Logic Relnotes: LSI 12Gb SAS driver mpr(4) added diff 265388 Mon May 05 20:43:36 MDT 2014 ken MFC the mpr(4) driver for LSI's 12Gb SAS cards. This includes r265236, r265237, r265241 and r265261: ------------------------------------------------------------------------ r265236 | ken | 2014-05-02 14:25:09 -0600 (Fri, 02 May 2014) | 51 lines Bring in the mpr(4) driver for LSI's MPT3 12Gb SAS controllers. This is derived from the mps(4) driver, but it supports only the 12Gb IT and IR hardware including the SAS 3004, SAS 3008 and SAS 3108. Some notes about this driver: o The 12Gb hardware can do "FastPath" I/O, and that capability is included in this driver. o WarpDrive functionality has been removed, since it isn't supported in the 12Gb driver interface. o The Scatter/Gather list handling code is significantly different between the 6Gb and 12Gb hardware. The 12Gb boards support IEEE Scatter/Gather lists. Thanks to LSI for developing and testing this driver for FreeBSD. share/man/man4/mpr.4: mpr(4) man page. sys/dev/mpr/*: mpr(4) driver files. sys/modules/Makefile, sys/modules/mpr/Makefile: Add a module Makefile for the mpr(4) driver. sys/conf/files: Add the mpr(4) driver. sys/amd64/conf/GENERIC, sys/i386/conf/GENERIC, sys/mips/conf/OCTEON1, sys/sparc64/conf/GENERIC: Add the mpr(4) driver to all config files that currently have the mps(4) driver. sys/ia64/conf/GENERIC: Add the mps(4) and mpr(4) drivers to the ia64 GENERIC config file. sys/i386/conf/XEN: Exclude the mpr module from building here. Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> Tested by: Chris Reeves <chrisr@spectralogic.com> Sponsored by: LSI, Spectra Logic Relnotes: LSI 12Gb SAS driver mpr(4) added ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265237 | ken | 2014-05-02 14:36:20 -0600 (Fri, 02 May 2014) | 8 lines Add the mpr(4) man page to the man4 Makefile. This should have been included in r265236. Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> MFC after: 3 days Sponsored by: LSI, Spectra Logic ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265241 | brueffer | 2014-05-02 15:14:28 -0600 (Fri, 02 May 2014) | 2 lines Use our standard SYNOPSIS wording; perform some cleanup while here. ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265261 | brueffer | 2014-05-03 05:15:28 -0600 (Sat, 03 May 2014) | 2 lines Add a missing colon. ------------------------------------------------------------------------ Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> Tested by: Chris Reeves <chrisr@spectralogic.com> Sponsored by: LSI, Spectra Logic Relnotes: LSI 12Gb SAS driver mpr(4) added diff 265388 Mon May 05 20:43:36 MDT 2014 ken MFC the mpr(4) driver for LSI's 12Gb SAS cards. This includes r265236, r265237, r265241 and r265261: ------------------------------------------------------------------------ r265236 | ken | 2014-05-02 14:25:09 -0600 (Fri, 02 May 2014) | 51 lines Bring in the mpr(4) driver for LSI's MPT3 12Gb SAS controllers. This is derived from the mps(4) driver, but it supports only the 12Gb IT and IR hardware including the SAS 3004, SAS 3008 and SAS 3108. Some notes about this driver: o The 12Gb hardware can do "FastPath" I/O, and that capability is included in this driver. o WarpDrive functionality has been removed, since it isn't supported in the 12Gb driver interface. o The Scatter/Gather list handling code is significantly different between the 6Gb and 12Gb hardware. The 12Gb boards support IEEE Scatter/Gather lists. Thanks to LSI for developing and testing this driver for FreeBSD. share/man/man4/mpr.4: mpr(4) man page. sys/dev/mpr/*: mpr(4) driver files. sys/modules/Makefile, sys/modules/mpr/Makefile: Add a module Makefile for the mpr(4) driver. sys/conf/files: Add the mpr(4) driver. sys/amd64/conf/GENERIC, sys/i386/conf/GENERIC, sys/mips/conf/OCTEON1, sys/sparc64/conf/GENERIC: Add the mpr(4) driver to all config files that currently have the mps(4) driver. sys/ia64/conf/GENERIC: Add the mps(4) and mpr(4) drivers to the ia64 GENERIC config file. sys/i386/conf/XEN: Exclude the mpr module from building here. Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> Tested by: Chris Reeves <chrisr@spectralogic.com> Sponsored by: LSI, Spectra Logic Relnotes: LSI 12Gb SAS driver mpr(4) added ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265237 | ken | 2014-05-02 14:36:20 -0600 (Fri, 02 May 2014) | 8 lines Add the mpr(4) man page to the man4 Makefile. This should have been included in r265236. Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> MFC after: 3 days Sponsored by: LSI, Spectra Logic ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265241 | brueffer | 2014-05-02 15:14:28 -0600 (Fri, 02 May 2014) | 2 lines Use our standard SYNOPSIS wording; perform some cleanup while here. ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265261 | brueffer | 2014-05-03 05:15:28 -0600 (Sat, 03 May 2014) | 2 lines Add a missing colon. ------------------------------------------------------------------------ Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> Tested by: Chris Reeves <chrisr@spectralogic.com> Sponsored by: LSI, Spectra Logic Relnotes: LSI 12Gb SAS driver mpr(4) added diff 265388 Mon May 05 20:43:36 MDT 2014 ken MFC the mpr(4) driver for LSI's 12Gb SAS cards. This includes r265236, r265237, r265241 and r265261: ------------------------------------------------------------------------ r265236 | ken | 2014-05-02 14:25:09 -0600 (Fri, 02 May 2014) | 51 lines Bring in the mpr(4) driver for LSI's MPT3 12Gb SAS controllers. This is derived from the mps(4) driver, but it supports only the 12Gb IT and IR hardware including the SAS 3004, SAS 3008 and SAS 3108. Some notes about this driver: o The 12Gb hardware can do "FastPath" I/O, and that capability is included in this driver. o WarpDrive functionality has been removed, since it isn't supported in the 12Gb driver interface. o The Scatter/Gather list handling code is significantly different between the 6Gb and 12Gb hardware. The 12Gb boards support IEEE Scatter/Gather lists. Thanks to LSI for developing and testing this driver for FreeBSD. share/man/man4/mpr.4: mpr(4) man page. sys/dev/mpr/*: mpr(4) driver files. sys/modules/Makefile, sys/modules/mpr/Makefile: Add a module Makefile for the mpr(4) driver. sys/conf/files: Add the mpr(4) driver. sys/amd64/conf/GENERIC, sys/i386/conf/GENERIC, sys/mips/conf/OCTEON1, sys/sparc64/conf/GENERIC: Add the mpr(4) driver to all config files that currently have the mps(4) driver. sys/ia64/conf/GENERIC: Add the mps(4) and mpr(4) drivers to the ia64 GENERIC config file. sys/i386/conf/XEN: Exclude the mpr module from building here. Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> Tested by: Chris Reeves <chrisr@spectralogic.com> Sponsored by: LSI, Spectra Logic Relnotes: LSI 12Gb SAS driver mpr(4) added ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265237 | ken | 2014-05-02 14:36:20 -0600 (Fri, 02 May 2014) | 8 lines Add the mpr(4) man page to the man4 Makefile. This should have been included in r265236. Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> MFC after: 3 days Sponsored by: LSI, Spectra Logic ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265241 | brueffer | 2014-05-02 15:14:28 -0600 (Fri, 02 May 2014) | 2 lines Use our standard SYNOPSIS wording; perform some cleanup while here. ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265261 | brueffer | 2014-05-03 05:15:28 -0600 (Sat, 03 May 2014) | 2 lines Add a missing colon. ------------------------------------------------------------------------ Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> Tested by: Chris Reeves <chrisr@spectralogic.com> Sponsored by: LSI, Spectra Logic Relnotes: LSI 12Gb SAS driver mpr(4) added diff 265388 Mon May 05 20:43:36 MDT 2014 ken MFC the mpr(4) driver for LSI's 12Gb SAS cards. This includes r265236, r265237, r265241 and r265261: ------------------------------------------------------------------------ r265236 | ken | 2014-05-02 14:25:09 -0600 (Fri, 02 May 2014) | 51 lines Bring in the mpr(4) driver for LSI's MPT3 12Gb SAS controllers. This is derived from the mps(4) driver, but it supports only the 12Gb IT and IR hardware including the SAS 3004, SAS 3008 and SAS 3108. Some notes about this driver: o The 12Gb hardware can do "FastPath" I/O, and that capability is included in this driver. o WarpDrive functionality has been removed, since it isn't supported in the 12Gb driver interface. o The Scatter/Gather list handling code is significantly different between the 6Gb and 12Gb hardware. The 12Gb boards support IEEE Scatter/Gather lists. Thanks to LSI for developing and testing this driver for FreeBSD. share/man/man4/mpr.4: mpr(4) man page. sys/dev/mpr/*: mpr(4) driver files. sys/modules/Makefile, sys/modules/mpr/Makefile: Add a module Makefile for the mpr(4) driver. sys/conf/files: Add the mpr(4) driver. sys/amd64/conf/GENERIC, sys/i386/conf/GENERIC, sys/mips/conf/OCTEON1, sys/sparc64/conf/GENERIC: Add the mpr(4) driver to all config files that currently have the mps(4) driver. sys/ia64/conf/GENERIC: Add the mps(4) and mpr(4) drivers to the ia64 GENERIC config file. sys/i386/conf/XEN: Exclude the mpr module from building here. Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> Tested by: Chris Reeves <chrisr@spectralogic.com> Sponsored by: LSI, Spectra Logic Relnotes: LSI 12Gb SAS driver mpr(4) added ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265237 | ken | 2014-05-02 14:36:20 -0600 (Fri, 02 May 2014) | 8 lines Add the mpr(4) man page to the man4 Makefile. This should have been included in r265236. Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> MFC after: 3 days Sponsored by: LSI, Spectra Logic ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265241 | brueffer | 2014-05-02 15:14:28 -0600 (Fri, 02 May 2014) | 2 lines Use our standard SYNOPSIS wording; perform some cleanup while here. ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265261 | brueffer | 2014-05-03 05:15:28 -0600 (Sat, 03 May 2014) | 2 lines Add a missing colon. ------------------------------------------------------------------------ Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> Tested by: Chris Reeves <chrisr@spectralogic.com> Sponsored by: LSI, Spectra Logic Relnotes: LSI 12Gb SAS driver mpr(4) added diff 265388 Mon May 05 20:43:36 MDT 2014 ken MFC the mpr(4) driver for LSI's 12Gb SAS cards. This includes r265236, r265237, r265241 and r265261: ------------------------------------------------------------------------ r265236 | ken | 2014-05-02 14:25:09 -0600 (Fri, 02 May 2014) | 51 lines Bring in the mpr(4) driver for LSI's MPT3 12Gb SAS controllers. This is derived from the mps(4) driver, but it supports only the 12Gb IT and IR hardware including the SAS 3004, SAS 3008 and SAS 3108. Some notes about this driver: o The 12Gb hardware can do "FastPath" I/O, and that capability is included in this driver. o WarpDrive functionality has been removed, since it isn't supported in the 12Gb driver interface. o The Scatter/Gather list handling code is significantly different between the 6Gb and 12Gb hardware. The 12Gb boards support IEEE Scatter/Gather lists. Thanks to LSI for developing and testing this driver for FreeBSD. share/man/man4/mpr.4: mpr(4) man page. sys/dev/mpr/*: mpr(4) driver files. sys/modules/Makefile, sys/modules/mpr/Makefile: Add a module Makefile for the mpr(4) driver. sys/conf/files: Add the mpr(4) driver. sys/amd64/conf/GENERIC, sys/i386/conf/GENERIC, sys/mips/conf/OCTEON1, sys/sparc64/conf/GENERIC: Add the mpr(4) driver to all config files that currently have the mps(4) driver. sys/ia64/conf/GENERIC: Add the mps(4) and mpr(4) drivers to the ia64 GENERIC config file. sys/i386/conf/XEN: Exclude the mpr module from building here. Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> Tested by: Chris Reeves <chrisr@spectralogic.com> Sponsored by: LSI, Spectra Logic Relnotes: LSI 12Gb SAS driver mpr(4) added ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265237 | ken | 2014-05-02 14:36:20 -0600 (Fri, 02 May 2014) | 8 lines Add the mpr(4) man page to the man4 Makefile. This should have been included in r265236. Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> MFC after: 3 days Sponsored by: LSI, Spectra Logic ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265241 | brueffer | 2014-05-02 15:14:28 -0600 (Fri, 02 May 2014) | 2 lines Use our standard SYNOPSIS wording; perform some cleanup while here. ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265261 | brueffer | 2014-05-03 05:15:28 -0600 (Sat, 03 May 2014) | 2 lines Add a missing colon. ------------------------------------------------------------------------ Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> Tested by: Chris Reeves <chrisr@spectralogic.com> Sponsored by: LSI, Spectra Logic Relnotes: LSI 12Gb SAS driver mpr(4) added diff 265388 Mon May 05 20:43:36 MDT 2014 ken MFC the mpr(4) driver for LSI's 12Gb SAS cards. This includes r265236, r265237, r265241 and r265261: ------------------------------------------------------------------------ r265236 | ken | 2014-05-02 14:25:09 -0600 (Fri, 02 May 2014) | 51 lines Bring in the mpr(4) driver for LSI's MPT3 12Gb SAS controllers. This is derived from the mps(4) driver, but it supports only the 12Gb IT and IR hardware including the SAS 3004, SAS 3008 and SAS 3108. Some notes about this driver: o The 12Gb hardware can do "FastPath" I/O, and that capability is included in this driver. o WarpDrive functionality has been removed, since it isn't supported in the 12Gb driver interface. o The Scatter/Gather list handling code is significantly different between the 6Gb and 12Gb hardware. The 12Gb boards support IEEE Scatter/Gather lists. Thanks to LSI for developing and testing this driver for FreeBSD. share/man/man4/mpr.4: mpr(4) man page. sys/dev/mpr/*: mpr(4) driver files. sys/modules/Makefile, sys/modules/mpr/Makefile: Add a module Makefile for the mpr(4) driver. sys/conf/files: Add the mpr(4) driver. sys/amd64/conf/GENERIC, sys/i386/conf/GENERIC, sys/mips/conf/OCTEON1, sys/sparc64/conf/GENERIC: Add the mpr(4) driver to all config files that currently have the mps(4) driver. sys/ia64/conf/GENERIC: Add the mps(4) and mpr(4) drivers to the ia64 GENERIC config file. sys/i386/conf/XEN: Exclude the mpr module from building here. Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> Tested by: Chris Reeves <chrisr@spectralogic.com> Sponsored by: LSI, Spectra Logic Relnotes: LSI 12Gb SAS driver mpr(4) added ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265237 | ken | 2014-05-02 14:36:20 -0600 (Fri, 02 May 2014) | 8 lines Add the mpr(4) man page to the man4 Makefile. This should have been included in r265236. Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> MFC after: 3 days Sponsored by: LSI, Spectra Logic ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265241 | brueffer | 2014-05-02 15:14:28 -0600 (Fri, 02 May 2014) | 2 lines Use our standard SYNOPSIS wording; perform some cleanup while here. ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265261 | brueffer | 2014-05-03 05:15:28 -0600 (Sat, 03 May 2014) | 2 lines Add a missing colon. ------------------------------------------------------------------------ Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> Tested by: Chris Reeves <chrisr@spectralogic.com> Sponsored by: LSI, Spectra Logic Relnotes: LSI 12Gb SAS driver mpr(4) added diff 265388 Mon May 05 20:43:36 MDT 2014 ken MFC the mpr(4) driver for LSI's 12Gb SAS cards. This includes r265236, r265237, r265241 and r265261: ------------------------------------------------------------------------ r265236 | ken | 2014-05-02 14:25:09 -0600 (Fri, 02 May 2014) | 51 lines Bring in the mpr(4) driver for LSI's MPT3 12Gb SAS controllers. This is derived from the mps(4) driver, but it supports only the 12Gb IT and IR hardware including the SAS 3004, SAS 3008 and SAS 3108. Some notes about this driver: o The 12Gb hardware can do "FastPath" I/O, and that capability is included in this driver. o WarpDrive functionality has been removed, since it isn't supported in the 12Gb driver interface. o The Scatter/Gather list handling code is significantly different between the 6Gb and 12Gb hardware. The 12Gb boards support IEEE Scatter/Gather lists. Thanks to LSI for developing and testing this driver for FreeBSD. share/man/man4/mpr.4: mpr(4) man page. sys/dev/mpr/*: mpr(4) driver files. sys/modules/Makefile, sys/modules/mpr/Makefile: Add a module Makefile for the mpr(4) driver. sys/conf/files: Add the mpr(4) driver. sys/amd64/conf/GENERIC, sys/i386/conf/GENERIC, sys/mips/conf/OCTEON1, sys/sparc64/conf/GENERIC: Add the mpr(4) driver to all config files that currently have the mps(4) driver. sys/ia64/conf/GENERIC: Add the mps(4) and mpr(4) drivers to the ia64 GENERIC config file. sys/i386/conf/XEN: Exclude the mpr module from building here. Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> Tested by: Chris Reeves <chrisr@spectralogic.com> Sponsored by: LSI, Spectra Logic Relnotes: LSI 12Gb SAS driver mpr(4) added ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265237 | ken | 2014-05-02 14:36:20 -0600 (Fri, 02 May 2014) | 8 lines Add the mpr(4) man page to the man4 Makefile. This should have been included in r265236. Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> MFC after: 3 days Sponsored by: LSI, Spectra Logic ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265241 | brueffer | 2014-05-02 15:14:28 -0600 (Fri, 02 May 2014) | 2 lines Use our standard SYNOPSIS wording; perform some cleanup while here. ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265261 | brueffer | 2014-05-03 05:15:28 -0600 (Sat, 03 May 2014) | 2 lines Add a missing colon. ------------------------------------------------------------------------ Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> Tested by: Chris Reeves <chrisr@spectralogic.com> Sponsored by: LSI, Spectra Logic Relnotes: LSI 12Gb SAS driver mpr(4) added diff 265388 Mon May 05 20:43:36 MDT 2014 ken MFC the mpr(4) driver for LSI's 12Gb SAS cards. This includes r265236, r265237, r265241 and r265261: ------------------------------------------------------------------------ r265236 | ken | 2014-05-02 14:25:09 -0600 (Fri, 02 May 2014) | 51 lines Bring in the mpr(4) driver for LSI's MPT3 12Gb SAS controllers. This is derived from the mps(4) driver, but it supports only the 12Gb IT and IR hardware including the SAS 3004, SAS 3008 and SAS 3108. Some notes about this driver: o The 12Gb hardware can do "FastPath" I/O, and that capability is included in this driver. o WarpDrive functionality has been removed, since it isn't supported in the 12Gb driver interface. o The Scatter/Gather list handling code is significantly different between the 6Gb and 12Gb hardware. The 12Gb boards support IEEE Scatter/Gather lists. Thanks to LSI for developing and testing this driver for FreeBSD. share/man/man4/mpr.4: mpr(4) man page. sys/dev/mpr/*: mpr(4) driver files. sys/modules/Makefile, sys/modules/mpr/Makefile: Add a module Makefile for the mpr(4) driver. sys/conf/files: Add the mpr(4) driver. sys/amd64/conf/GENERIC, sys/i386/conf/GENERIC, sys/mips/conf/OCTEON1, sys/sparc64/conf/GENERIC: Add the mpr(4) driver to all config files that currently have the mps(4) driver. sys/ia64/conf/GENERIC: Add the mps(4) and mpr(4) drivers to the ia64 GENERIC config file. sys/i386/conf/XEN: Exclude the mpr module from building here. Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> Tested by: Chris Reeves <chrisr@spectralogic.com> Sponsored by: LSI, Spectra Logic Relnotes: LSI 12Gb SAS driver mpr(4) added ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265237 | ken | 2014-05-02 14:36:20 -0600 (Fri, 02 May 2014) | 8 lines Add the mpr(4) man page to the man4 Makefile. This should have been included in r265236. Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> MFC after: 3 days Sponsored by: LSI, Spectra Logic ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265241 | brueffer | 2014-05-02 15:14:28 -0600 (Fri, 02 May 2014) | 2 lines Use our standard SYNOPSIS wording; perform some cleanup while here. ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265261 | brueffer | 2014-05-03 05:15:28 -0600 (Sat, 03 May 2014) | 2 lines Add a missing colon. ------------------------------------------------------------------------ Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> Tested by: Chris Reeves <chrisr@spectralogic.com> Sponsored by: LSI, Spectra Logic Relnotes: LSI 12Gb SAS driver mpr(4) added diff 265388 Mon May 05 20:43:36 MDT 2014 ken MFC the mpr(4) driver for LSI's 12Gb SAS cards. This includes r265236, r265237, r265241 and r265261: ------------------------------------------------------------------------ r265236 | ken | 2014-05-02 14:25:09 -0600 (Fri, 02 May 2014) | 51 lines Bring in the mpr(4) driver for LSI's MPT3 12Gb SAS controllers. This is derived from the mps(4) driver, but it supports only the 12Gb IT and IR hardware including the SAS 3004, SAS 3008 and SAS 3108. Some notes about this driver: o The 12Gb hardware can do "FastPath" I/O, and that capability is included in this driver. o WarpDrive functionality has been removed, since it isn't supported in the 12Gb driver interface. o The Scatter/Gather list handling code is significantly different between the 6Gb and 12Gb hardware. The 12Gb boards support IEEE Scatter/Gather lists. Thanks to LSI for developing and testing this driver for FreeBSD. share/man/man4/mpr.4: mpr(4) man page. sys/dev/mpr/*: mpr(4) driver files. sys/modules/Makefile, sys/modules/mpr/Makefile: Add a module Makefile for the mpr(4) driver. sys/conf/files: Add the mpr(4) driver. sys/amd64/conf/GENERIC, sys/i386/conf/GENERIC, sys/mips/conf/OCTEON1, sys/sparc64/conf/GENERIC: Add the mpr(4) driver to all config files that currently have the mps(4) driver. sys/ia64/conf/GENERIC: Add the mps(4) and mpr(4) drivers to the ia64 GENERIC config file. sys/i386/conf/XEN: Exclude the mpr module from building here. Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> Tested by: Chris Reeves <chrisr@spectralogic.com> Sponsored by: LSI, Spectra Logic Relnotes: LSI 12Gb SAS driver mpr(4) added ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265237 | ken | 2014-05-02 14:36:20 -0600 (Fri, 02 May 2014) | 8 lines Add the mpr(4) man page to the man4 Makefile. This should have been included in r265236. Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> MFC after: 3 days Sponsored by: LSI, Spectra Logic ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265241 | brueffer | 2014-05-02 15:14:28 -0600 (Fri, 02 May 2014) | 2 lines Use our standard SYNOPSIS wording; perform some cleanup while here. ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265261 | brueffer | 2014-05-03 05:15:28 -0600 (Sat, 03 May 2014) | 2 lines Add a missing colon. ------------------------------------------------------------------------ Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> Tested by: Chris Reeves <chrisr@spectralogic.com> Sponsored by: LSI, Spectra Logic Relnotes: LSI 12Gb SAS driver mpr(4) added diff 265388 Mon May 05 20:43:36 MDT 2014 ken MFC the mpr(4) driver for LSI's 12Gb SAS cards. This includes r265236, r265237, r265241 and r265261: ------------------------------------------------------------------------ r265236 | ken | 2014-05-02 14:25:09 -0600 (Fri, 02 May 2014) | 51 lines Bring in the mpr(4) driver for LSI's MPT3 12Gb SAS controllers. This is derived from the mps(4) driver, but it supports only the 12Gb IT and IR hardware including the SAS 3004, SAS 3008 and SAS 3108. Some notes about this driver: o The 12Gb hardware can do "FastPath" I/O, and that capability is included in this driver. o WarpDrive functionality has been removed, since it isn't supported in the 12Gb driver interface. o The Scatter/Gather list handling code is significantly different between the 6Gb and 12Gb hardware. The 12Gb boards support IEEE Scatter/Gather lists. Thanks to LSI for developing and testing this driver for FreeBSD. share/man/man4/mpr.4: mpr(4) man page. sys/dev/mpr/*: mpr(4) driver files. sys/modules/Makefile, sys/modules/mpr/Makefile: Add a module Makefile for the mpr(4) driver. sys/conf/files: Add the mpr(4) driver. sys/amd64/conf/GENERIC, sys/i386/conf/GENERIC, sys/mips/conf/OCTEON1, sys/sparc64/conf/GENERIC: Add the mpr(4) driver to all config files that currently have the mps(4) driver. sys/ia64/conf/GENERIC: Add the mps(4) and mpr(4) drivers to the ia64 GENERIC config file. sys/i386/conf/XEN: Exclude the mpr module from building here. Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> Tested by: Chris Reeves <chrisr@spectralogic.com> Sponsored by: LSI, Spectra Logic Relnotes: LSI 12Gb SAS driver mpr(4) added ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265237 | ken | 2014-05-02 14:36:20 -0600 (Fri, 02 May 2014) | 8 lines Add the mpr(4) man page to the man4 Makefile. This should have been included in r265236. Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> MFC after: 3 days Sponsored by: LSI, Spectra Logic ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265241 | brueffer | 2014-05-02 15:14:28 -0600 (Fri, 02 May 2014) | 2 lines Use our standard SYNOPSIS wording; perform some cleanup while here. ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265261 | brueffer | 2014-05-03 05:15:28 -0600 (Sat, 03 May 2014) | 2 lines Add a missing colon. ------------------------------------------------------------------------ Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> Tested by: Chris Reeves <chrisr@spectralogic.com> Sponsored by: LSI, Spectra Logic Relnotes: LSI 12Gb SAS driver mpr(4) added diff 265388 Mon May 05 20:43:36 MDT 2014 ken MFC the mpr(4) driver for LSI's 12Gb SAS cards. This includes r265236, r265237, r265241 and r265261: ------------------------------------------------------------------------ r265236 | ken | 2014-05-02 14:25:09 -0600 (Fri, 02 May 2014) | 51 lines Bring in the mpr(4) driver for LSI's MPT3 12Gb SAS controllers. This is derived from the mps(4) driver, but it supports only the 12Gb IT and IR hardware including the SAS 3004, SAS 3008 and SAS 3108. Some notes about this driver: o The 12Gb hardware can do "FastPath" I/O, and that capability is included in this driver. o WarpDrive functionality has been removed, since it isn't supported in the 12Gb driver interface. o The Scatter/Gather list handling code is significantly different between the 6Gb and 12Gb hardware. The 12Gb boards support IEEE Scatter/Gather lists. Thanks to LSI for developing and testing this driver for FreeBSD. share/man/man4/mpr.4: mpr(4) man page. sys/dev/mpr/*: mpr(4) driver files. sys/modules/Makefile, sys/modules/mpr/Makefile: Add a module Makefile for the mpr(4) driver. sys/conf/files: Add the mpr(4) driver. sys/amd64/conf/GENERIC, sys/i386/conf/GENERIC, sys/mips/conf/OCTEON1, sys/sparc64/conf/GENERIC: Add the mpr(4) driver to all config files that currently have the mps(4) driver. sys/ia64/conf/GENERIC: Add the mps(4) and mpr(4) drivers to the ia64 GENERIC config file. sys/i386/conf/XEN: Exclude the mpr module from building here. Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> Tested by: Chris Reeves <chrisr@spectralogic.com> Sponsored by: LSI, Spectra Logic Relnotes: LSI 12Gb SAS driver mpr(4) added ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265237 | ken | 2014-05-02 14:36:20 -0600 (Fri, 02 May 2014) | 8 lines Add the mpr(4) man page to the man4 Makefile. This should have been included in r265236. Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> MFC after: 3 days Sponsored by: LSI, Spectra Logic ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265241 | brueffer | 2014-05-02 15:14:28 -0600 (Fri, 02 May 2014) | 2 lines Use our standard SYNOPSIS wording; perform some cleanup while here. ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265261 | brueffer | 2014-05-03 05:15:28 -0600 (Sat, 03 May 2014) | 2 lines Add a missing colon. ------------------------------------------------------------------------ Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> Tested by: Chris Reeves <chrisr@spectralogic.com> Sponsored by: LSI, Spectra Logic Relnotes: LSI 12Gb SAS driver mpr(4) added diff 265388 Mon May 05 20:43:36 MDT 2014 ken MFC the mpr(4) driver for LSI's 12Gb SAS cards. This includes r265236, r265237, r265241 and r265261: ------------------------------------------------------------------------ r265236 | ken | 2014-05-02 14:25:09 -0600 (Fri, 02 May 2014) | 51 lines Bring in the mpr(4) driver for LSI's MPT3 12Gb SAS controllers. This is derived from the mps(4) driver, but it supports only the 12Gb IT and IR hardware including the SAS 3004, SAS 3008 and SAS 3108. Some notes about this driver: o The 12Gb hardware can do "FastPath" I/O, and that capability is included in this driver. o WarpDrive functionality has been removed, since it isn't supported in the 12Gb driver interface. o The Scatter/Gather list handling code is significantly different between the 6Gb and 12Gb hardware. The 12Gb boards support IEEE Scatter/Gather lists. Thanks to LSI for developing and testing this driver for FreeBSD. share/man/man4/mpr.4: mpr(4) man page. sys/dev/mpr/*: mpr(4) driver files. sys/modules/Makefile, sys/modules/mpr/Makefile: Add a module Makefile for the mpr(4) driver. sys/conf/files: Add the mpr(4) driver. sys/amd64/conf/GENERIC, sys/i386/conf/GENERIC, sys/mips/conf/OCTEON1, sys/sparc64/conf/GENERIC: Add the mpr(4) driver to all config files that currently have the mps(4) driver. sys/ia64/conf/GENERIC: Add the mps(4) and mpr(4) drivers to the ia64 GENERIC config file. sys/i386/conf/XEN: Exclude the mpr module from building here. Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> Tested by: Chris Reeves <chrisr@spectralogic.com> Sponsored by: LSI, Spectra Logic Relnotes: LSI 12Gb SAS driver mpr(4) added ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265237 | ken | 2014-05-02 14:36:20 -0600 (Fri, 02 May 2014) | 8 lines Add the mpr(4) man page to the man4 Makefile. This should have been included in r265236. Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> MFC after: 3 days Sponsored by: LSI, Spectra Logic ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265241 | brueffer | 2014-05-02 15:14:28 -0600 (Fri, 02 May 2014) | 2 lines Use our standard SYNOPSIS wording; perform some cleanup while here. ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265261 | brueffer | 2014-05-03 05:15:28 -0600 (Sat, 03 May 2014) | 2 lines Add a missing colon. ------------------------------------------------------------------------ Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> Tested by: Chris Reeves <chrisr@spectralogic.com> Sponsored by: LSI, Spectra Logic Relnotes: LSI 12Gb SAS driver mpr(4) added |
| H A D | mpi2_ra.h | diff 265388 Mon May 05 20:43:36 MDT 2014 ken MFC the mpr(4) driver for LSI's 12Gb SAS cards. This includes r265236, r265237, r265241 and r265261: ------------------------------------------------------------------------ r265236 | ken | 2014-05-02 14:25:09 -0600 (Fri, 02 May 2014) | 51 lines Bring in the mpr(4) driver for LSI's MPT3 12Gb SAS controllers. This is derived from the mps(4) driver, but it supports only the 12Gb IT and IR hardware including the SAS 3004, SAS 3008 and SAS 3108. Some notes about this driver: o The 12Gb hardware can do "FastPath" I/O, and that capability is included in this driver. o WarpDrive functionality has been removed, since it isn't supported in the 12Gb driver interface. o The Scatter/Gather list handling code is significantly different between the 6Gb and 12Gb hardware. The 12Gb boards support IEEE Scatter/Gather lists. Thanks to LSI for developing and testing this driver for FreeBSD. share/man/man4/mpr.4: mpr(4) man page. sys/dev/mpr/*: mpr(4) driver files. sys/modules/Makefile, sys/modules/mpr/Makefile: Add a module Makefile for the mpr(4) driver. sys/conf/files: Add the mpr(4) driver. sys/amd64/conf/GENERIC, sys/i386/conf/GENERIC, sys/mips/conf/OCTEON1, sys/sparc64/conf/GENERIC: Add the mpr(4) driver to all config files that currently have the mps(4) driver. sys/ia64/conf/GENERIC: Add the mps(4) and mpr(4) drivers to the ia64 GENERIC config file. sys/i386/conf/XEN: Exclude the mpr module from building here. Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> Tested by: Chris Reeves <chrisr@spectralogic.com> Sponsored by: LSI, Spectra Logic Relnotes: LSI 12Gb SAS driver mpr(4) added ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265237 | ken | 2014-05-02 14:36:20 -0600 (Fri, 02 May 2014) | 8 lines Add the mpr(4) man page to the man4 Makefile. This should have been included in r265236. Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> MFC after: 3 days Sponsored by: LSI, Spectra Logic ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265241 | brueffer | 2014-05-02 15:14:28 -0600 (Fri, 02 May 2014) | 2 lines Use our standard SYNOPSIS wording; perform some cleanup while here. ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265261 | brueffer | 2014-05-03 05:15:28 -0600 (Sat, 03 May 2014) | 2 lines Add a missing colon. ------------------------------------------------------------------------ Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> Tested by: Chris Reeves <chrisr@spectralogic.com> Sponsored by: LSI, Spectra Logic Relnotes: LSI 12Gb SAS driver mpr(4) added diff 265388 Mon May 05 20:43:36 MDT 2014 ken MFC the mpr(4) driver for LSI's 12Gb SAS cards. This includes r265236, r265237, r265241 and r265261: ------------------------------------------------------------------------ r265236 | ken | 2014-05-02 14:25:09 -0600 (Fri, 02 May 2014) | 51 lines Bring in the mpr(4) driver for LSI's MPT3 12Gb SAS controllers. This is derived from the mps(4) driver, but it supports only the 12Gb IT and IR hardware including the SAS 3004, SAS 3008 and SAS 3108. Some notes about this driver: o The 12Gb hardware can do "FastPath" I/O, and that capability is included in this driver. o WarpDrive functionality has been removed, since it isn't supported in the 12Gb driver interface. o The Scatter/Gather list handling code is significantly different between the 6Gb and 12Gb hardware. The 12Gb boards support IEEE Scatter/Gather lists. Thanks to LSI for developing and testing this driver for FreeBSD. share/man/man4/mpr.4: mpr(4) man page. sys/dev/mpr/*: mpr(4) driver files. sys/modules/Makefile, sys/modules/mpr/Makefile: Add a module Makefile for the mpr(4) driver. sys/conf/files: Add the mpr(4) driver. sys/amd64/conf/GENERIC, sys/i386/conf/GENERIC, sys/mips/conf/OCTEON1, sys/sparc64/conf/GENERIC: Add the mpr(4) driver to all config files that currently have the mps(4) driver. sys/ia64/conf/GENERIC: Add the mps(4) and mpr(4) drivers to the ia64 GENERIC config file. sys/i386/conf/XEN: Exclude the mpr module from building here. Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> Tested by: Chris Reeves <chrisr@spectralogic.com> Sponsored by: LSI, Spectra Logic Relnotes: LSI 12Gb SAS driver mpr(4) added ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265237 | ken | 2014-05-02 14:36:20 -0600 (Fri, 02 May 2014) | 8 lines Add the mpr(4) man page to the man4 Makefile. This should have been included in r265236. Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> MFC after: 3 days Sponsored by: LSI, Spectra Logic ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265241 | brueffer | 2014-05-02 15:14:28 -0600 (Fri, 02 May 2014) | 2 lines Use our standard SYNOPSIS wording; perform some cleanup while here. ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265261 | brueffer | 2014-05-03 05:15:28 -0600 (Sat, 03 May 2014) | 2 lines Add a missing colon. ------------------------------------------------------------------------ Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> Tested by: Chris Reeves <chrisr@spectralogic.com> Sponsored by: LSI, Spectra Logic Relnotes: LSI 12Gb SAS driver mpr(4) added diff 265388 Mon May 05 20:43:36 MDT 2014 ken MFC the mpr(4) driver for LSI's 12Gb SAS cards. This includes r265236, r265237, r265241 and r265261: ------------------------------------------------------------------------ r265236 | ken | 2014-05-02 14:25:09 -0600 (Fri, 02 May 2014) | 51 lines Bring in the mpr(4) driver for LSI's MPT3 12Gb SAS controllers. This is derived from the mps(4) driver, but it supports only the 12Gb IT and IR hardware including the SAS 3004, SAS 3008 and SAS 3108. Some notes about this driver: o The 12Gb hardware can do "FastPath" I/O, and that capability is included in this driver. o WarpDrive functionality has been removed, since it isn't supported in the 12Gb driver interface. o The Scatter/Gather list handling code is significantly different between the 6Gb and 12Gb hardware. The 12Gb boards support IEEE Scatter/Gather lists. Thanks to LSI for developing and testing this driver for FreeBSD. share/man/man4/mpr.4: mpr(4) man page. sys/dev/mpr/*: mpr(4) driver files. sys/modules/Makefile, sys/modules/mpr/Makefile: Add a module Makefile for the mpr(4) driver. sys/conf/files: Add the mpr(4) driver. sys/amd64/conf/GENERIC, sys/i386/conf/GENERIC, sys/mips/conf/OCTEON1, sys/sparc64/conf/GENERIC: Add the mpr(4) driver to all config files that currently have the mps(4) driver. sys/ia64/conf/GENERIC: Add the mps(4) and mpr(4) drivers to the ia64 GENERIC config file. sys/i386/conf/XEN: Exclude the mpr module from building here. Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> Tested by: Chris Reeves <chrisr@spectralogic.com> Sponsored by: LSI, Spectra Logic Relnotes: LSI 12Gb SAS driver mpr(4) added ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265237 | ken | 2014-05-02 14:36:20 -0600 (Fri, 02 May 2014) | 8 lines Add the mpr(4) man page to the man4 Makefile. This should have been included in r265236. Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> MFC after: 3 days Sponsored by: LSI, Spectra Logic ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265241 | brueffer | 2014-05-02 15:14:28 -0600 (Fri, 02 May 2014) | 2 lines Use our standard SYNOPSIS wording; perform some cleanup while here. ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265261 | brueffer | 2014-05-03 05:15:28 -0600 (Sat, 03 May 2014) | 2 lines Add a missing colon. ------------------------------------------------------------------------ Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> Tested by: Chris Reeves <chrisr@spectralogic.com> Sponsored by: LSI, Spectra Logic Relnotes: LSI 12Gb SAS driver mpr(4) added diff 265388 Mon May 05 20:43:36 MDT 2014 ken MFC the mpr(4) driver for LSI's 12Gb SAS cards. This includes r265236, r265237, r265241 and r265261: ------------------------------------------------------------------------ r265236 | ken | 2014-05-02 14:25:09 -0600 (Fri, 02 May 2014) | 51 lines Bring in the mpr(4) driver for LSI's MPT3 12Gb SAS controllers. This is derived from the mps(4) driver, but it supports only the 12Gb IT and IR hardware including the SAS 3004, SAS 3008 and SAS 3108. Some notes about this driver: o The 12Gb hardware can do "FastPath" I/O, and that capability is included in this driver. o WarpDrive functionality has been removed, since it isn't supported in the 12Gb driver interface. o The Scatter/Gather list handling code is significantly different between the 6Gb and 12Gb hardware. The 12Gb boards support IEEE Scatter/Gather lists. Thanks to LSI for developing and testing this driver for FreeBSD. share/man/man4/mpr.4: mpr(4) man page. sys/dev/mpr/*: mpr(4) driver files. sys/modules/Makefile, sys/modules/mpr/Makefile: Add a module Makefile for the mpr(4) driver. sys/conf/files: Add the mpr(4) driver. sys/amd64/conf/GENERIC, sys/i386/conf/GENERIC, sys/mips/conf/OCTEON1, sys/sparc64/conf/GENERIC: Add the mpr(4) driver to all config files that currently have the mps(4) driver. sys/ia64/conf/GENERIC: Add the mps(4) and mpr(4) drivers to the ia64 GENERIC config file. sys/i386/conf/XEN: Exclude the mpr module from building here. Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> Tested by: Chris Reeves <chrisr@spectralogic.com> Sponsored by: LSI, Spectra Logic Relnotes: LSI 12Gb SAS driver mpr(4) added ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265237 | ken | 2014-05-02 14:36:20 -0600 (Fri, 02 May 2014) | 8 lines Add the mpr(4) man page to the man4 Makefile. This should have been included in r265236. Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> MFC after: 3 days Sponsored by: LSI, Spectra Logic ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265241 | brueffer | 2014-05-02 15:14:28 -0600 (Fri, 02 May 2014) | 2 lines Use our standard SYNOPSIS wording; perform some cleanup while here. ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265261 | brueffer | 2014-05-03 05:15:28 -0600 (Sat, 03 May 2014) | 2 lines Add a missing colon. ------------------------------------------------------------------------ Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> Tested by: Chris Reeves <chrisr@spectralogic.com> Sponsored by: LSI, Spectra Logic Relnotes: LSI 12Gb SAS driver mpr(4) added diff 265388 Mon May 05 20:43:36 MDT 2014 ken MFC the mpr(4) driver for LSI's 12Gb SAS cards. This includes r265236, r265237, r265241 and r265261: ------------------------------------------------------------------------ r265236 | ken | 2014-05-02 14:25:09 -0600 (Fri, 02 May 2014) | 51 lines Bring in the mpr(4) driver for LSI's MPT3 12Gb SAS controllers. This is derived from the mps(4) driver, but it supports only the 12Gb IT and IR hardware including the SAS 3004, SAS 3008 and SAS 3108. Some notes about this driver: o The 12Gb hardware can do "FastPath" I/O, and that capability is included in this driver. o WarpDrive functionality has been removed, since it isn't supported in the 12Gb driver interface. o The Scatter/Gather list handling code is significantly different between the 6Gb and 12Gb hardware. The 12Gb boards support IEEE Scatter/Gather lists. Thanks to LSI for developing and testing this driver for FreeBSD. share/man/man4/mpr.4: mpr(4) man page. sys/dev/mpr/*: mpr(4) driver files. sys/modules/Makefile, sys/modules/mpr/Makefile: Add a module Makefile for the mpr(4) driver. sys/conf/files: Add the mpr(4) driver. sys/amd64/conf/GENERIC, sys/i386/conf/GENERIC, sys/mips/conf/OCTEON1, sys/sparc64/conf/GENERIC: Add the mpr(4) driver to all config files that currently have the mps(4) driver. sys/ia64/conf/GENERIC: Add the mps(4) and mpr(4) drivers to the ia64 GENERIC config file. sys/i386/conf/XEN: Exclude the mpr module from building here. Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> Tested by: Chris Reeves <chrisr@spectralogic.com> Sponsored by: LSI, Spectra Logic Relnotes: LSI 12Gb SAS driver mpr(4) added ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265237 | ken | 2014-05-02 14:36:20 -0600 (Fri, 02 May 2014) | 8 lines Add the mpr(4) man page to the man4 Makefile. This should have been included in r265236. Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> MFC after: 3 days Sponsored by: LSI, Spectra Logic ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265241 | brueffer | 2014-05-02 15:14:28 -0600 (Fri, 02 May 2014) | 2 lines Use our standard SYNOPSIS wording; perform some cleanup while here. ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265261 | brueffer | 2014-05-03 05:15:28 -0600 (Sat, 03 May 2014) | 2 lines Add a missing colon. ------------------------------------------------------------------------ Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> Tested by: Chris Reeves <chrisr@spectralogic.com> Sponsored by: LSI, Spectra Logic Relnotes: LSI 12Gb SAS driver mpr(4) added diff 265388 Mon May 05 20:43:36 MDT 2014 ken MFC the mpr(4) driver for LSI's 12Gb SAS cards. This includes r265236, r265237, r265241 and r265261: ------------------------------------------------------------------------ r265236 | ken | 2014-05-02 14:25:09 -0600 (Fri, 02 May 2014) | 51 lines Bring in the mpr(4) driver for LSI's MPT3 12Gb SAS controllers. This is derived from the mps(4) driver, but it supports only the 12Gb IT and IR hardware including the SAS 3004, SAS 3008 and SAS 3108. Some notes about this driver: o The 12Gb hardware can do "FastPath" I/O, and that capability is included in this driver. o WarpDrive functionality has been removed, since it isn't supported in the 12Gb driver interface. o The Scatter/Gather list handling code is significantly different between the 6Gb and 12Gb hardware. The 12Gb boards support IEEE Scatter/Gather lists. Thanks to LSI for developing and testing this driver for FreeBSD. share/man/man4/mpr.4: mpr(4) man page. sys/dev/mpr/*: mpr(4) driver files. sys/modules/Makefile, sys/modules/mpr/Makefile: Add a module Makefile for the mpr(4) driver. sys/conf/files: Add the mpr(4) driver. sys/amd64/conf/GENERIC, sys/i386/conf/GENERIC, sys/mips/conf/OCTEON1, sys/sparc64/conf/GENERIC: Add the mpr(4) driver to all config files that currently have the mps(4) driver. sys/ia64/conf/GENERIC: Add the mps(4) and mpr(4) drivers to the ia64 GENERIC config file. sys/i386/conf/XEN: Exclude the mpr module from building here. Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> Tested by: Chris Reeves <chrisr@spectralogic.com> Sponsored by: LSI, Spectra Logic Relnotes: LSI 12Gb SAS driver mpr(4) added ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265237 | ken | 2014-05-02 14:36:20 -0600 (Fri, 02 May 2014) | 8 lines Add the mpr(4) man page to the man4 Makefile. This should have been included in r265236. Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> MFC after: 3 days Sponsored by: LSI, Spectra Logic ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265241 | brueffer | 2014-05-02 15:14:28 -0600 (Fri, 02 May 2014) | 2 lines Use our standard SYNOPSIS wording; perform some cleanup while here. ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265261 | brueffer | 2014-05-03 05:15:28 -0600 (Sat, 03 May 2014) | 2 lines Add a missing colon. ------------------------------------------------------------------------ Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> Tested by: Chris Reeves <chrisr@spectralogic.com> Sponsored by: LSI, Spectra Logic Relnotes: LSI 12Gb SAS driver mpr(4) added diff 265388 Mon May 05 20:43:36 MDT 2014 ken MFC the mpr(4) driver for LSI's 12Gb SAS cards. This includes r265236, r265237, r265241 and r265261: ------------------------------------------------------------------------ r265236 | ken | 2014-05-02 14:25:09 -0600 (Fri, 02 May 2014) | 51 lines Bring in the mpr(4) driver for LSI's MPT3 12Gb SAS controllers. This is derived from the mps(4) driver, but it supports only the 12Gb IT and IR hardware including the SAS 3004, SAS 3008 and SAS 3108. Some notes about this driver: o The 12Gb hardware can do "FastPath" I/O, and that capability is included in this driver. o WarpDrive functionality has been removed, since it isn't supported in the 12Gb driver interface. o The Scatter/Gather list handling code is significantly different between the 6Gb and 12Gb hardware. The 12Gb boards support IEEE Scatter/Gather lists. Thanks to LSI for developing and testing this driver for FreeBSD. share/man/man4/mpr.4: mpr(4) man page. sys/dev/mpr/*: mpr(4) driver files. sys/modules/Makefile, sys/modules/mpr/Makefile: Add a module Makefile for the mpr(4) driver. sys/conf/files: Add the mpr(4) driver. sys/amd64/conf/GENERIC, sys/i386/conf/GENERIC, sys/mips/conf/OCTEON1, sys/sparc64/conf/GENERIC: Add the mpr(4) driver to all config files that currently have the mps(4) driver. sys/ia64/conf/GENERIC: Add the mps(4) and mpr(4) drivers to the ia64 GENERIC config file. sys/i386/conf/XEN: Exclude the mpr module from building here. Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> Tested by: Chris Reeves <chrisr@spectralogic.com> Sponsored by: LSI, Spectra Logic Relnotes: LSI 12Gb SAS driver mpr(4) added ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265237 | ken | 2014-05-02 14:36:20 -0600 (Fri, 02 May 2014) | 8 lines Add the mpr(4) man page to the man4 Makefile. This should have been included in r265236. Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> MFC after: 3 days Sponsored by: LSI, Spectra Logic ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265241 | brueffer | 2014-05-02 15:14:28 -0600 (Fri, 02 May 2014) | 2 lines Use our standard SYNOPSIS wording; perform some cleanup while here. ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265261 | brueffer | 2014-05-03 05:15:28 -0600 (Sat, 03 May 2014) | 2 lines Add a missing colon. ------------------------------------------------------------------------ Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> Tested by: Chris Reeves <chrisr@spectralogic.com> Sponsored by: LSI, Spectra Logic Relnotes: LSI 12Gb SAS driver mpr(4) added diff 265388 Mon May 05 20:43:36 MDT 2014 ken MFC the mpr(4) driver for LSI's 12Gb SAS cards. This includes r265236, r265237, r265241 and r265261: ------------------------------------------------------------------------ r265236 | ken | 2014-05-02 14:25:09 -0600 (Fri, 02 May 2014) | 51 lines Bring in the mpr(4) driver for LSI's MPT3 12Gb SAS controllers. This is derived from the mps(4) driver, but it supports only the 12Gb IT and IR hardware including the SAS 3004, SAS 3008 and SAS 3108. Some notes about this driver: o The 12Gb hardware can do "FastPath" I/O, and that capability is included in this driver. o WarpDrive functionality has been removed, since it isn't supported in the 12Gb driver interface. o The Scatter/Gather list handling code is significantly different between the 6Gb and 12Gb hardware. The 12Gb boards support IEEE Scatter/Gather lists. Thanks to LSI for developing and testing this driver for FreeBSD. share/man/man4/mpr.4: mpr(4) man page. sys/dev/mpr/*: mpr(4) driver files. sys/modules/Makefile, sys/modules/mpr/Makefile: Add a module Makefile for the mpr(4) driver. sys/conf/files: Add the mpr(4) driver. sys/amd64/conf/GENERIC, sys/i386/conf/GENERIC, sys/mips/conf/OCTEON1, sys/sparc64/conf/GENERIC: Add the mpr(4) driver to all config files that currently have the mps(4) driver. sys/ia64/conf/GENERIC: Add the mps(4) and mpr(4) drivers to the ia64 GENERIC config file. sys/i386/conf/XEN: Exclude the mpr module from building here. Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> Tested by: Chris Reeves <chrisr@spectralogic.com> Sponsored by: LSI, Spectra Logic Relnotes: LSI 12Gb SAS driver mpr(4) added ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265237 | ken | 2014-05-02 14:36:20 -0600 (Fri, 02 May 2014) | 8 lines Add the mpr(4) man page to the man4 Makefile. This should have been included in r265236. Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> MFC after: 3 days Sponsored by: LSI, Spectra Logic ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265241 | brueffer | 2014-05-02 15:14:28 -0600 (Fri, 02 May 2014) | 2 lines Use our standard SYNOPSIS wording; perform some cleanup while here. ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265261 | brueffer | 2014-05-03 05:15:28 -0600 (Sat, 03 May 2014) | 2 lines Add a missing colon. ------------------------------------------------------------------------ Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> Tested by: Chris Reeves <chrisr@spectralogic.com> Sponsored by: LSI, Spectra Logic Relnotes: LSI 12Gb SAS driver mpr(4) added diff 265388 Mon May 05 20:43:36 MDT 2014 ken MFC the mpr(4) driver for LSI's 12Gb SAS cards. This includes r265236, r265237, r265241 and r265261: ------------------------------------------------------------------------ r265236 | ken | 2014-05-02 14:25:09 -0600 (Fri, 02 May 2014) | 51 lines Bring in the mpr(4) driver for LSI's MPT3 12Gb SAS controllers. This is derived from the mps(4) driver, but it supports only the 12Gb IT and IR hardware including the SAS 3004, SAS 3008 and SAS 3108. Some notes about this driver: o The 12Gb hardware can do "FastPath" I/O, and that capability is included in this driver. o WarpDrive functionality has been removed, since it isn't supported in the 12Gb driver interface. o The Scatter/Gather list handling code is significantly different between the 6Gb and 12Gb hardware. The 12Gb boards support IEEE Scatter/Gather lists. Thanks to LSI for developing and testing this driver for FreeBSD. share/man/man4/mpr.4: mpr(4) man page. sys/dev/mpr/*: mpr(4) driver files. sys/modules/Makefile, sys/modules/mpr/Makefile: Add a module Makefile for the mpr(4) driver. sys/conf/files: Add the mpr(4) driver. sys/amd64/conf/GENERIC, sys/i386/conf/GENERIC, sys/mips/conf/OCTEON1, sys/sparc64/conf/GENERIC: Add the mpr(4) driver to all config files that currently have the mps(4) driver. sys/ia64/conf/GENERIC: Add the mps(4) and mpr(4) drivers to the ia64 GENERIC config file. sys/i386/conf/XEN: Exclude the mpr module from building here. Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> Tested by: Chris Reeves <chrisr@spectralogic.com> Sponsored by: LSI, Spectra Logic Relnotes: LSI 12Gb SAS driver mpr(4) added ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265237 | ken | 2014-05-02 14:36:20 -0600 (Fri, 02 May 2014) | 8 lines Add the mpr(4) man page to the man4 Makefile. This should have been included in r265236. Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> MFC after: 3 days Sponsored by: LSI, Spectra Logic ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265241 | brueffer | 2014-05-02 15:14:28 -0600 (Fri, 02 May 2014) | 2 lines Use our standard SYNOPSIS wording; perform some cleanup while here. ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265261 | brueffer | 2014-05-03 05:15:28 -0600 (Sat, 03 May 2014) | 2 lines Add a missing colon. ------------------------------------------------------------------------ Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> Tested by: Chris Reeves <chrisr@spectralogic.com> Sponsored by: LSI, Spectra Logic Relnotes: LSI 12Gb SAS driver mpr(4) added diff 265388 Mon May 05 20:43:36 MDT 2014 ken MFC the mpr(4) driver for LSI's 12Gb SAS cards. This includes r265236, r265237, r265241 and r265261: ------------------------------------------------------------------------ r265236 | ken | 2014-05-02 14:25:09 -0600 (Fri, 02 May 2014) | 51 lines Bring in the mpr(4) driver for LSI's MPT3 12Gb SAS controllers. This is derived from the mps(4) driver, but it supports only the 12Gb IT and IR hardware including the SAS 3004, SAS 3008 and SAS 3108. Some notes about this driver: o The 12Gb hardware can do "FastPath" I/O, and that capability is included in this driver. o WarpDrive functionality has been removed, since it isn't supported in the 12Gb driver interface. o The Scatter/Gather list handling code is significantly different between the 6Gb and 12Gb hardware. The 12Gb boards support IEEE Scatter/Gather lists. Thanks to LSI for developing and testing this driver for FreeBSD. share/man/man4/mpr.4: mpr(4) man page. sys/dev/mpr/*: mpr(4) driver files. sys/modules/Makefile, sys/modules/mpr/Makefile: Add a module Makefile for the mpr(4) driver. sys/conf/files: Add the mpr(4) driver. sys/amd64/conf/GENERIC, sys/i386/conf/GENERIC, sys/mips/conf/OCTEON1, sys/sparc64/conf/GENERIC: Add the mpr(4) driver to all config files that currently have the mps(4) driver. sys/ia64/conf/GENERIC: Add the mps(4) and mpr(4) drivers to the ia64 GENERIC config file. sys/i386/conf/XEN: Exclude the mpr module from building here. Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> Tested by: Chris Reeves <chrisr@spectralogic.com> Sponsored by: LSI, Spectra Logic Relnotes: LSI 12Gb SAS driver mpr(4) added ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265237 | ken | 2014-05-02 14:36:20 -0600 (Fri, 02 May 2014) | 8 lines Add the mpr(4) man page to the man4 Makefile. This should have been included in r265236. Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> MFC after: 3 days Sponsored by: LSI, Spectra Logic ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265241 | brueffer | 2014-05-02 15:14:28 -0600 (Fri, 02 May 2014) | 2 lines Use our standard SYNOPSIS wording; perform some cleanup while here. ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265261 | brueffer | 2014-05-03 05:15:28 -0600 (Sat, 03 May 2014) | 2 lines Add a missing colon. ------------------------------------------------------------------------ Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> Tested by: Chris Reeves <chrisr@spectralogic.com> Sponsored by: LSI, Spectra Logic Relnotes: LSI 12Gb SAS driver mpr(4) added diff 265388 Mon May 05 20:43:36 MDT 2014 ken MFC the mpr(4) driver for LSI's 12Gb SAS cards. This includes r265236, r265237, r265241 and r265261: ------------------------------------------------------------------------ r265236 | ken | 2014-05-02 14:25:09 -0600 (Fri, 02 May 2014) | 51 lines Bring in the mpr(4) driver for LSI's MPT3 12Gb SAS controllers. This is derived from the mps(4) driver, but it supports only the 12Gb IT and IR hardware including the SAS 3004, SAS 3008 and SAS 3108. Some notes about this driver: o The 12Gb hardware can do "FastPath" I/O, and that capability is included in this driver. o WarpDrive functionality has been removed, since it isn't supported in the 12Gb driver interface. o The Scatter/Gather list handling code is significantly different between the 6Gb and 12Gb hardware. The 12Gb boards support IEEE Scatter/Gather lists. Thanks to LSI for developing and testing this driver for FreeBSD. share/man/man4/mpr.4: mpr(4) man page. sys/dev/mpr/*: mpr(4) driver files. sys/modules/Makefile, sys/modules/mpr/Makefile: Add a module Makefile for the mpr(4) driver. sys/conf/files: Add the mpr(4) driver. sys/amd64/conf/GENERIC, sys/i386/conf/GENERIC, sys/mips/conf/OCTEON1, sys/sparc64/conf/GENERIC: Add the mpr(4) driver to all config files that currently have the mps(4) driver. sys/ia64/conf/GENERIC: Add the mps(4) and mpr(4) drivers to the ia64 GENERIC config file. sys/i386/conf/XEN: Exclude the mpr module from building here. Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> Tested by: Chris Reeves <chrisr@spectralogic.com> Sponsored by: LSI, Spectra Logic Relnotes: LSI 12Gb SAS driver mpr(4) added ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265237 | ken | 2014-05-02 14:36:20 -0600 (Fri, 02 May 2014) | 8 lines Add the mpr(4) man page to the man4 Makefile. This should have been included in r265236. Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> MFC after: 3 days Sponsored by: LSI, Spectra Logic ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265241 | brueffer | 2014-05-02 15:14:28 -0600 (Fri, 02 May 2014) | 2 lines Use our standard SYNOPSIS wording; perform some cleanup while here. ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265261 | brueffer | 2014-05-03 05:15:28 -0600 (Sat, 03 May 2014) | 2 lines Add a missing colon. ------------------------------------------------------------------------ Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> Tested by: Chris Reeves <chrisr@spectralogic.com> Sponsored by: LSI, Spectra Logic Relnotes: LSI 12Gb SAS driver mpr(4) added diff 265388 Mon May 05 20:43:36 MDT 2014 ken MFC the mpr(4) driver for LSI's 12Gb SAS cards. This includes r265236, r265237, r265241 and r265261: ------------------------------------------------------------------------ r265236 | ken | 2014-05-02 14:25:09 -0600 (Fri, 02 May 2014) | 51 lines Bring in the mpr(4) driver for LSI's MPT3 12Gb SAS controllers. This is derived from the mps(4) driver, but it supports only the 12Gb IT and IR hardware including the SAS 3004, SAS 3008 and SAS 3108. Some notes about this driver: o The 12Gb hardware can do "FastPath" I/O, and that capability is included in this driver. o WarpDrive functionality has been removed, since it isn't supported in the 12Gb driver interface. o The Scatter/Gather list handling code is significantly different between the 6Gb and 12Gb hardware. The 12Gb boards support IEEE Scatter/Gather lists. Thanks to LSI for developing and testing this driver for FreeBSD. share/man/man4/mpr.4: mpr(4) man page. sys/dev/mpr/*: mpr(4) driver files. sys/modules/Makefile, sys/modules/mpr/Makefile: Add a module Makefile for the mpr(4) driver. sys/conf/files: Add the mpr(4) driver. sys/amd64/conf/GENERIC, sys/i386/conf/GENERIC, sys/mips/conf/OCTEON1, sys/sparc64/conf/GENERIC: Add the mpr(4) driver to all config files that currently have the mps(4) driver. sys/ia64/conf/GENERIC: Add the mps(4) and mpr(4) drivers to the ia64 GENERIC config file. sys/i386/conf/XEN: Exclude the mpr module from building here. Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> Tested by: Chris Reeves <chrisr@spectralogic.com> Sponsored by: LSI, Spectra Logic Relnotes: LSI 12Gb SAS driver mpr(4) added ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265237 | ken | 2014-05-02 14:36:20 -0600 (Fri, 02 May 2014) | 8 lines Add the mpr(4) man page to the man4 Makefile. This should have been included in r265236. Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> MFC after: 3 days Sponsored by: LSI, Spectra Logic ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265241 | brueffer | 2014-05-02 15:14:28 -0600 (Fri, 02 May 2014) | 2 lines Use our standard SYNOPSIS wording; perform some cleanup while here. ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265261 | brueffer | 2014-05-03 05:15:28 -0600 (Sat, 03 May 2014) | 2 lines Add a missing colon. ------------------------------------------------------------------------ Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> Tested by: Chris Reeves <chrisr@spectralogic.com> Sponsored by: LSI, Spectra Logic Relnotes: LSI 12Gb SAS driver mpr(4) added diff 265388 Mon May 05 20:43:36 MDT 2014 ken MFC the mpr(4) driver for LSI's 12Gb SAS cards. This includes r265236, r265237, r265241 and r265261: ------------------------------------------------------------------------ r265236 | ken | 2014-05-02 14:25:09 -0600 (Fri, 02 May 2014) | 51 lines Bring in the mpr(4) driver for LSI's MPT3 12Gb SAS controllers. This is derived from the mps(4) driver, but it supports only the 12Gb IT and IR hardware including the SAS 3004, SAS 3008 and SAS 3108. Some notes about this driver: o The 12Gb hardware can do "FastPath" I/O, and that capability is included in this driver. o WarpDrive functionality has been removed, since it isn't supported in the 12Gb driver interface. o The Scatter/Gather list handling code is significantly different between the 6Gb and 12Gb hardware. The 12Gb boards support IEEE Scatter/Gather lists. Thanks to LSI for developing and testing this driver for FreeBSD. share/man/man4/mpr.4: mpr(4) man page. sys/dev/mpr/*: mpr(4) driver files. sys/modules/Makefile, sys/modules/mpr/Makefile: Add a module Makefile for the mpr(4) driver. sys/conf/files: Add the mpr(4) driver. sys/amd64/conf/GENERIC, sys/i386/conf/GENERIC, sys/mips/conf/OCTEON1, sys/sparc64/conf/GENERIC: Add the mpr(4) driver to all config files that currently have the mps(4) driver. sys/ia64/conf/GENERIC: Add the mps(4) and mpr(4) drivers to the ia64 GENERIC config file. sys/i386/conf/XEN: Exclude the mpr module from building here. Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> Tested by: Chris Reeves <chrisr@spectralogic.com> Sponsored by: LSI, Spectra Logic Relnotes: LSI 12Gb SAS driver mpr(4) added ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265237 | ken | 2014-05-02 14:36:20 -0600 (Fri, 02 May 2014) | 8 lines Add the mpr(4) man page to the man4 Makefile. This should have been included in r265236. Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> MFC after: 3 days Sponsored by: LSI, Spectra Logic ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265241 | brueffer | 2014-05-02 15:14:28 -0600 (Fri, 02 May 2014) | 2 lines Use our standard SYNOPSIS wording; perform some cleanup while here. ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265261 | brueffer | 2014-05-03 05:15:28 -0600 (Sat, 03 May 2014) | 2 lines Add a missing colon. ------------------------------------------------------------------------ Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> Tested by: Chris Reeves <chrisr@spectralogic.com> Sponsored by: LSI, Spectra Logic Relnotes: LSI 12Gb SAS driver mpr(4) added diff 265388 Mon May 05 20:43:36 MDT 2014 ken MFC the mpr(4) driver for LSI's 12Gb SAS cards. This includes r265236, r265237, r265241 and r265261: ------------------------------------------------------------------------ r265236 | ken | 2014-05-02 14:25:09 -0600 (Fri, 02 May 2014) | 51 lines Bring in the mpr(4) driver for LSI's MPT3 12Gb SAS controllers. This is derived from the mps(4) driver, but it supports only the 12Gb IT and IR hardware including the SAS 3004, SAS 3008 and SAS 3108. Some notes about this driver: o The 12Gb hardware can do "FastPath" I/O, and that capability is included in this driver. o WarpDrive functionality has been removed, since it isn't supported in the 12Gb driver interface. o The Scatter/Gather list handling code is significantly different between the 6Gb and 12Gb hardware. The 12Gb boards support IEEE Scatter/Gather lists. Thanks to LSI for developing and testing this driver for FreeBSD. share/man/man4/mpr.4: mpr(4) man page. sys/dev/mpr/*: mpr(4) driver files. sys/modules/Makefile, sys/modules/mpr/Makefile: Add a module Makefile for the mpr(4) driver. sys/conf/files: Add the mpr(4) driver. sys/amd64/conf/GENERIC, sys/i386/conf/GENERIC, sys/mips/conf/OCTEON1, sys/sparc64/conf/GENERIC: Add the mpr(4) driver to all config files that currently have the mps(4) driver. sys/ia64/conf/GENERIC: Add the mps(4) and mpr(4) drivers to the ia64 GENERIC config file. sys/i386/conf/XEN: Exclude the mpr module from building here. Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> Tested by: Chris Reeves <chrisr@spectralogic.com> Sponsored by: LSI, Spectra Logic Relnotes: LSI 12Gb SAS driver mpr(4) added ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265237 | ken | 2014-05-02 14:36:20 -0600 (Fri, 02 May 2014) | 8 lines Add the mpr(4) man page to the man4 Makefile. This should have been included in r265236. Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> MFC after: 3 days Sponsored by: LSI, Spectra Logic ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265241 | brueffer | 2014-05-02 15:14:28 -0600 (Fri, 02 May 2014) | 2 lines Use our standard SYNOPSIS wording; perform some cleanup while here. ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265261 | brueffer | 2014-05-03 05:15:28 -0600 (Sat, 03 May 2014) | 2 lines Add a missing colon. ------------------------------------------------------------------------ Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> Tested by: Chris Reeves <chrisr@spectralogic.com> Sponsored by: LSI, Spectra Logic Relnotes: LSI 12Gb SAS driver mpr(4) added diff 265388 Mon May 05 20:43:36 MDT 2014 ken MFC the mpr(4) driver for LSI's 12Gb SAS cards. This includes r265236, r265237, r265241 and r265261: ------------------------------------------------------------------------ r265236 | ken | 2014-05-02 14:25:09 -0600 (Fri, 02 May 2014) | 51 lines Bring in the mpr(4) driver for LSI's MPT3 12Gb SAS controllers. This is derived from the mps(4) driver, but it supports only the 12Gb IT and IR hardware including the SAS 3004, SAS 3008 and SAS 3108. Some notes about this driver: o The 12Gb hardware can do "FastPath" I/O, and that capability is included in this driver. o WarpDrive functionality has been removed, since it isn't supported in the 12Gb driver interface. o The Scatter/Gather list handling code is significantly different between the 6Gb and 12Gb hardware. The 12Gb boards support IEEE Scatter/Gather lists. Thanks to LSI for developing and testing this driver for FreeBSD. share/man/man4/mpr.4: mpr(4) man page. sys/dev/mpr/*: mpr(4) driver files. sys/modules/Makefile, sys/modules/mpr/Makefile: Add a module Makefile for the mpr(4) driver. sys/conf/files: Add the mpr(4) driver. sys/amd64/conf/GENERIC, sys/i386/conf/GENERIC, sys/mips/conf/OCTEON1, sys/sparc64/conf/GENERIC: Add the mpr(4) driver to all config files that currently have the mps(4) driver. sys/ia64/conf/GENERIC: Add the mps(4) and mpr(4) drivers to the ia64 GENERIC config file. sys/i386/conf/XEN: Exclude the mpr module from building here. Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> Tested by: Chris Reeves <chrisr@spectralogic.com> Sponsored by: LSI, Spectra Logic Relnotes: LSI 12Gb SAS driver mpr(4) added ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265237 | ken | 2014-05-02 14:36:20 -0600 (Fri, 02 May 2014) | 8 lines Add the mpr(4) man page to the man4 Makefile. This should have been included in r265236. Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> MFC after: 3 days Sponsored by: LSI, Spectra Logic ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265241 | brueffer | 2014-05-02 15:14:28 -0600 (Fri, 02 May 2014) | 2 lines Use our standard SYNOPSIS wording; perform some cleanup while here. ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265261 | brueffer | 2014-05-03 05:15:28 -0600 (Sat, 03 May 2014) | 2 lines Add a missing colon. ------------------------------------------------------------------------ Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> Tested by: Chris Reeves <chrisr@spectralogic.com> Sponsored by: LSI, Spectra Logic Relnotes: LSI 12Gb SAS driver mpr(4) added |
| H A D | mpi2_raid.h | diff 265388 Mon May 05 20:43:36 MDT 2014 ken MFC the mpr(4) driver for LSI's 12Gb SAS cards. This includes r265236, r265237, r265241 and r265261: ------------------------------------------------------------------------ r265236 | ken | 2014-05-02 14:25:09 -0600 (Fri, 02 May 2014) | 51 lines Bring in the mpr(4) driver for LSI's MPT3 12Gb SAS controllers. This is derived from the mps(4) driver, but it supports only the 12Gb IT and IR hardware including the SAS 3004, SAS 3008 and SAS 3108. Some notes about this driver: o The 12Gb hardware can do "FastPath" I/O, and that capability is included in this driver. o WarpDrive functionality has been removed, since it isn't supported in the 12Gb driver interface. o The Scatter/Gather list handling code is significantly different between the 6Gb and 12Gb hardware. The 12Gb boards support IEEE Scatter/Gather lists. Thanks to LSI for developing and testing this driver for FreeBSD. share/man/man4/mpr.4: mpr(4) man page. sys/dev/mpr/*: mpr(4) driver files. sys/modules/Makefile, sys/modules/mpr/Makefile: Add a module Makefile for the mpr(4) driver. sys/conf/files: Add the mpr(4) driver. sys/amd64/conf/GENERIC, sys/i386/conf/GENERIC, sys/mips/conf/OCTEON1, sys/sparc64/conf/GENERIC: Add the mpr(4) driver to all config files that currently have the mps(4) driver. sys/ia64/conf/GENERIC: Add the mps(4) and mpr(4) drivers to the ia64 GENERIC config file. sys/i386/conf/XEN: Exclude the mpr module from building here. Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> Tested by: Chris Reeves <chrisr@spectralogic.com> Sponsored by: LSI, Spectra Logic Relnotes: LSI 12Gb SAS driver mpr(4) added ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265237 | ken | 2014-05-02 14:36:20 -0600 (Fri, 02 May 2014) | 8 lines Add the mpr(4) man page to the man4 Makefile. This should have been included in r265236. Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> MFC after: 3 days Sponsored by: LSI, Spectra Logic ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265241 | brueffer | 2014-05-02 15:14:28 -0600 (Fri, 02 May 2014) | 2 lines Use our standard SYNOPSIS wording; perform some cleanup while here. ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265261 | brueffer | 2014-05-03 05:15:28 -0600 (Sat, 03 May 2014) | 2 lines Add a missing colon. ------------------------------------------------------------------------ Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> Tested by: Chris Reeves <chrisr@spectralogic.com> Sponsored by: LSI, Spectra Logic Relnotes: LSI 12Gb SAS driver mpr(4) added diff 265388 Mon May 05 20:43:36 MDT 2014 ken MFC the mpr(4) driver for LSI's 12Gb SAS cards. This includes r265236, r265237, r265241 and r265261: ------------------------------------------------------------------------ r265236 | ken | 2014-05-02 14:25:09 -0600 (Fri, 02 May 2014) | 51 lines Bring in the mpr(4) driver for LSI's MPT3 12Gb SAS controllers. This is derived from the mps(4) driver, but it supports only the 12Gb IT and IR hardware including the SAS 3004, SAS 3008 and SAS 3108. Some notes about this driver: o The 12Gb hardware can do "FastPath" I/O, and that capability is included in this driver. o WarpDrive functionality has been removed, since it isn't supported in the 12Gb driver interface. o The Scatter/Gather list handling code is significantly different between the 6Gb and 12Gb hardware. The 12Gb boards support IEEE Scatter/Gather lists. Thanks to LSI for developing and testing this driver for FreeBSD. share/man/man4/mpr.4: mpr(4) man page. sys/dev/mpr/*: mpr(4) driver files. sys/modules/Makefile, sys/modules/mpr/Makefile: Add a module Makefile for the mpr(4) driver. sys/conf/files: Add the mpr(4) driver. sys/amd64/conf/GENERIC, sys/i386/conf/GENERIC, sys/mips/conf/OCTEON1, sys/sparc64/conf/GENERIC: Add the mpr(4) driver to all config files that currently have the mps(4) driver. sys/ia64/conf/GENERIC: Add the mps(4) and mpr(4) drivers to the ia64 GENERIC config file. sys/i386/conf/XEN: Exclude the mpr module from building here. Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> Tested by: Chris Reeves <chrisr@spectralogic.com> Sponsored by: LSI, Spectra Logic Relnotes: LSI 12Gb SAS driver mpr(4) added ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265237 | ken | 2014-05-02 14:36:20 -0600 (Fri, 02 May 2014) | 8 lines Add the mpr(4) man page to the man4 Makefile. This should have been included in r265236. Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> MFC after: 3 days Sponsored by: LSI, Spectra Logic ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265241 | brueffer | 2014-05-02 15:14:28 -0600 (Fri, 02 May 2014) | 2 lines Use our standard SYNOPSIS wording; perform some cleanup while here. ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265261 | brueffer | 2014-05-03 05:15:28 -0600 (Sat, 03 May 2014) | 2 lines Add a missing colon. ------------------------------------------------------------------------ Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> Tested by: Chris Reeves <chrisr@spectralogic.com> Sponsored by: LSI, Spectra Logic Relnotes: LSI 12Gb SAS driver mpr(4) added diff 265388 Mon May 05 20:43:36 MDT 2014 ken MFC the mpr(4) driver for LSI's 12Gb SAS cards. This includes r265236, r265237, r265241 and r265261: ------------------------------------------------------------------------ r265236 | ken | 2014-05-02 14:25:09 -0600 (Fri, 02 May 2014) | 51 lines Bring in the mpr(4) driver for LSI's MPT3 12Gb SAS controllers. This is derived from the mps(4) driver, but it supports only the 12Gb IT and IR hardware including the SAS 3004, SAS 3008 and SAS 3108. Some notes about this driver: o The 12Gb hardware can do "FastPath" I/O, and that capability is included in this driver. o WarpDrive functionality has been removed, since it isn't supported in the 12Gb driver interface. o The Scatter/Gather list handling code is significantly different between the 6Gb and 12Gb hardware. The 12Gb boards support IEEE Scatter/Gather lists. Thanks to LSI for developing and testing this driver for FreeBSD. share/man/man4/mpr.4: mpr(4) man page. sys/dev/mpr/*: mpr(4) driver files. sys/modules/Makefile, sys/modules/mpr/Makefile: Add a module Makefile for the mpr(4) driver. sys/conf/files: Add the mpr(4) driver. sys/amd64/conf/GENERIC, sys/i386/conf/GENERIC, sys/mips/conf/OCTEON1, sys/sparc64/conf/GENERIC: Add the mpr(4) driver to all config files that currently have the mps(4) driver. sys/ia64/conf/GENERIC: Add the mps(4) and mpr(4) drivers to the ia64 GENERIC config file. sys/i386/conf/XEN: Exclude the mpr module from building here. Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> Tested by: Chris Reeves <chrisr@spectralogic.com> Sponsored by: LSI, Spectra Logic Relnotes: LSI 12Gb SAS driver mpr(4) added ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265237 | ken | 2014-05-02 14:36:20 -0600 (Fri, 02 May 2014) | 8 lines Add the mpr(4) man page to the man4 Makefile. This should have been included in r265236. Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> MFC after: 3 days Sponsored by: LSI, Spectra Logic ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265241 | brueffer | 2014-05-02 15:14:28 -0600 (Fri, 02 May 2014) | 2 lines Use our standard SYNOPSIS wording; perform some cleanup while here. ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265261 | brueffer | 2014-05-03 05:15:28 -0600 (Sat, 03 May 2014) | 2 lines Add a missing colon. ------------------------------------------------------------------------ Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> Tested by: Chris Reeves <chrisr@spectralogic.com> Sponsored by: LSI, Spectra Logic Relnotes: LSI 12Gb SAS driver mpr(4) added diff 265388 Mon May 05 20:43:36 MDT 2014 ken MFC the mpr(4) driver for LSI's 12Gb SAS cards. This includes r265236, r265237, r265241 and r265261: ------------------------------------------------------------------------ r265236 | ken | 2014-05-02 14:25:09 -0600 (Fri, 02 May 2014) | 51 lines Bring in the mpr(4) driver for LSI's MPT3 12Gb SAS controllers. This is derived from the mps(4) driver, but it supports only the 12Gb IT and IR hardware including the SAS 3004, SAS 3008 and SAS 3108. Some notes about this driver: o The 12Gb hardware can do "FastPath" I/O, and that capability is included in this driver. o WarpDrive functionality has been removed, since it isn't supported in the 12Gb driver interface. o The Scatter/Gather list handling code is significantly different between the 6Gb and 12Gb hardware. The 12Gb boards support IEEE Scatter/Gather lists. Thanks to LSI for developing and testing this driver for FreeBSD. share/man/man4/mpr.4: mpr(4) man page. sys/dev/mpr/*: mpr(4) driver files. sys/modules/Makefile, sys/modules/mpr/Makefile: Add a module Makefile for the mpr(4) driver. sys/conf/files: Add the mpr(4) driver. sys/amd64/conf/GENERIC, sys/i386/conf/GENERIC, sys/mips/conf/OCTEON1, sys/sparc64/conf/GENERIC: Add the mpr(4) driver to all config files that currently have the mps(4) driver. sys/ia64/conf/GENERIC: Add the mps(4) and mpr(4) drivers to the ia64 GENERIC config file. sys/i386/conf/XEN: Exclude the mpr module from building here. Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> Tested by: Chris Reeves <chrisr@spectralogic.com> Sponsored by: LSI, Spectra Logic Relnotes: LSI 12Gb SAS driver mpr(4) added ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265237 | ken | 2014-05-02 14:36:20 -0600 (Fri, 02 May 2014) | 8 lines Add the mpr(4) man page to the man4 Makefile. This should have been included in r265236. Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> MFC after: 3 days Sponsored by: LSI, Spectra Logic ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265241 | brueffer | 2014-05-02 15:14:28 -0600 (Fri, 02 May 2014) | 2 lines Use our standard SYNOPSIS wording; perform some cleanup while here. ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265261 | brueffer | 2014-05-03 05:15:28 -0600 (Sat, 03 May 2014) | 2 lines Add a missing colon. ------------------------------------------------------------------------ Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> Tested by: Chris Reeves <chrisr@spectralogic.com> Sponsored by: LSI, Spectra Logic Relnotes: LSI 12Gb SAS driver mpr(4) added diff 265388 Mon May 05 20:43:36 MDT 2014 ken MFC the mpr(4) driver for LSI's 12Gb SAS cards. This includes r265236, r265237, r265241 and r265261: ------------------------------------------------------------------------ r265236 | ken | 2014-05-02 14:25:09 -0600 (Fri, 02 May 2014) | 51 lines Bring in the mpr(4) driver for LSI's MPT3 12Gb SAS controllers. This is derived from the mps(4) driver, but it supports only the 12Gb IT and IR hardware including the SAS 3004, SAS 3008 and SAS 3108. Some notes about this driver: o The 12Gb hardware can do "FastPath" I/O, and that capability is included in this driver. o WarpDrive functionality has been removed, since it isn't supported in the 12Gb driver interface. o The Scatter/Gather list handling code is significantly different between the 6Gb and 12Gb hardware. The 12Gb boards support IEEE Scatter/Gather lists. Thanks to LSI for developing and testing this driver for FreeBSD. share/man/man4/mpr.4: mpr(4) man page. sys/dev/mpr/*: mpr(4) driver files. sys/modules/Makefile, sys/modules/mpr/Makefile: Add a module Makefile for the mpr(4) driver. sys/conf/files: Add the mpr(4) driver. sys/amd64/conf/GENERIC, sys/i386/conf/GENERIC, sys/mips/conf/OCTEON1, sys/sparc64/conf/GENERIC: Add the mpr(4) driver to all config files that currently have the mps(4) driver. sys/ia64/conf/GENERIC: Add the mps(4) and mpr(4) drivers to the ia64 GENERIC config file. sys/i386/conf/XEN: Exclude the mpr module from building here. Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> Tested by: Chris Reeves <chrisr@spectralogic.com> Sponsored by: LSI, Spectra Logic Relnotes: LSI 12Gb SAS driver mpr(4) added ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265237 | ken | 2014-05-02 14:36:20 -0600 (Fri, 02 May 2014) | 8 lines Add the mpr(4) man page to the man4 Makefile. This should have been included in r265236. Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> MFC after: 3 days Sponsored by: LSI, Spectra Logic ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265241 | brueffer | 2014-05-02 15:14:28 -0600 (Fri, 02 May 2014) | 2 lines Use our standard SYNOPSIS wording; perform some cleanup while here. ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265261 | brueffer | 2014-05-03 05:15:28 -0600 (Sat, 03 May 2014) | 2 lines Add a missing colon. ------------------------------------------------------------------------ Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> Tested by: Chris Reeves <chrisr@spectralogic.com> Sponsored by: LSI, Spectra Logic Relnotes: LSI 12Gb SAS driver mpr(4) added diff 265388 Mon May 05 20:43:36 MDT 2014 ken MFC the mpr(4) driver for LSI's 12Gb SAS cards. This includes r265236, r265237, r265241 and r265261: ------------------------------------------------------------------------ r265236 | ken | 2014-05-02 14:25:09 -0600 (Fri, 02 May 2014) | 51 lines Bring in the mpr(4) driver for LSI's MPT3 12Gb SAS controllers. This is derived from the mps(4) driver, but it supports only the 12Gb IT and IR hardware including the SAS 3004, SAS 3008 and SAS 3108. Some notes about this driver: o The 12Gb hardware can do "FastPath" I/O, and that capability is included in this driver. o WarpDrive functionality has been removed, since it isn't supported in the 12Gb driver interface. o The Scatter/Gather list handling code is significantly different between the 6Gb and 12Gb hardware. The 12Gb boards support IEEE Scatter/Gather lists. Thanks to LSI for developing and testing this driver for FreeBSD. share/man/man4/mpr.4: mpr(4) man page. sys/dev/mpr/*: mpr(4) driver files. sys/modules/Makefile, sys/modules/mpr/Makefile: Add a module Makefile for the mpr(4) driver. sys/conf/files: Add the mpr(4) driver. sys/amd64/conf/GENERIC, sys/i386/conf/GENERIC, sys/mips/conf/OCTEON1, sys/sparc64/conf/GENERIC: Add the mpr(4) driver to all config files that currently have the mps(4) driver. sys/ia64/conf/GENERIC: Add the mps(4) and mpr(4) drivers to the ia64 GENERIC config file. sys/i386/conf/XEN: Exclude the mpr module from building here. Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> Tested by: Chris Reeves <chrisr@spectralogic.com> Sponsored by: LSI, Spectra Logic Relnotes: LSI 12Gb SAS driver mpr(4) added ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265237 | ken | 2014-05-02 14:36:20 -0600 (Fri, 02 May 2014) | 8 lines Add the mpr(4) man page to the man4 Makefile. This should have been included in r265236. Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> MFC after: 3 days Sponsored by: LSI, Spectra Logic ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265241 | brueffer | 2014-05-02 15:14:28 -0600 (Fri, 02 May 2014) | 2 lines Use our standard SYNOPSIS wording; perform some cleanup while here. ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265261 | brueffer | 2014-05-03 05:15:28 -0600 (Sat, 03 May 2014) | 2 lines Add a missing colon. ------------------------------------------------------------------------ Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> Tested by: Chris Reeves <chrisr@spectralogic.com> Sponsored by: LSI, Spectra Logic Relnotes: LSI 12Gb SAS driver mpr(4) added diff 265388 Mon May 05 20:43:36 MDT 2014 ken MFC the mpr(4) driver for LSI's 12Gb SAS cards. This includes r265236, r265237, r265241 and r265261: ------------------------------------------------------------------------ r265236 | ken | 2014-05-02 14:25:09 -0600 (Fri, 02 May 2014) | 51 lines Bring in the mpr(4) driver for LSI's MPT3 12Gb SAS controllers. This is derived from the mps(4) driver, but it supports only the 12Gb IT and IR hardware including the SAS 3004, SAS 3008 and SAS 3108. Some notes about this driver: o The 12Gb hardware can do "FastPath" I/O, and that capability is included in this driver. o WarpDrive functionality has been removed, since it isn't supported in the 12Gb driver interface. o The Scatter/Gather list handling code is significantly different between the 6Gb and 12Gb hardware. The 12Gb boards support IEEE Scatter/Gather lists. Thanks to LSI for developing and testing this driver for FreeBSD. share/man/man4/mpr.4: mpr(4) man page. sys/dev/mpr/*: mpr(4) driver files. sys/modules/Makefile, sys/modules/mpr/Makefile: Add a module Makefile for the mpr(4) driver. sys/conf/files: Add the mpr(4) driver. sys/amd64/conf/GENERIC, sys/i386/conf/GENERIC, sys/mips/conf/OCTEON1, sys/sparc64/conf/GENERIC: Add the mpr(4) driver to all config files that currently have the mps(4) driver. sys/ia64/conf/GENERIC: Add the mps(4) and mpr(4) drivers to the ia64 GENERIC config file. sys/i386/conf/XEN: Exclude the mpr module from building here. Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> Tested by: Chris Reeves <chrisr@spectralogic.com> Sponsored by: LSI, Spectra Logic Relnotes: LSI 12Gb SAS driver mpr(4) added ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265237 | ken | 2014-05-02 14:36:20 -0600 (Fri, 02 May 2014) | 8 lines Add the mpr(4) man page to the man4 Makefile. This should have been included in r265236. Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> MFC after: 3 days Sponsored by: LSI, Spectra Logic ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265241 | brueffer | 2014-05-02 15:14:28 -0600 (Fri, 02 May 2014) | 2 lines Use our standard SYNOPSIS wording; perform some cleanup while here. ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265261 | brueffer | 2014-05-03 05:15:28 -0600 (Sat, 03 May 2014) | 2 lines Add a missing colon. ------------------------------------------------------------------------ Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> Tested by: Chris Reeves <chrisr@spectralogic.com> Sponsored by: LSI, Spectra Logic Relnotes: LSI 12Gb SAS driver mpr(4) added diff 265388 Mon May 05 20:43:36 MDT 2014 ken MFC the mpr(4) driver for LSI's 12Gb SAS cards. This includes r265236, r265237, r265241 and r265261: ------------------------------------------------------------------------ r265236 | ken | 2014-05-02 14:25:09 -0600 (Fri, 02 May 2014) | 51 lines Bring in the mpr(4) driver for LSI's MPT3 12Gb SAS controllers. This is derived from the mps(4) driver, but it supports only the 12Gb IT and IR hardware including the SAS 3004, SAS 3008 and SAS 3108. Some notes about this driver: o The 12Gb hardware can do "FastPath" I/O, and that capability is included in this driver. o WarpDrive functionality has been removed, since it isn't supported in the 12Gb driver interface. o The Scatter/Gather list handling code is significantly different between the 6Gb and 12Gb hardware. The 12Gb boards support IEEE Scatter/Gather lists. Thanks to LSI for developing and testing this driver for FreeBSD. share/man/man4/mpr.4: mpr(4) man page. sys/dev/mpr/*: mpr(4) driver files. sys/modules/Makefile, sys/modules/mpr/Makefile: Add a module Makefile for the mpr(4) driver. sys/conf/files: Add the mpr(4) driver. sys/amd64/conf/GENERIC, sys/i386/conf/GENERIC, sys/mips/conf/OCTEON1, sys/sparc64/conf/GENERIC: Add the mpr(4) driver to all config files that currently have the mps(4) driver. sys/ia64/conf/GENERIC: Add the mps(4) and mpr(4) drivers to the ia64 GENERIC config file. sys/i386/conf/XEN: Exclude the mpr module from building here. Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> Tested by: Chris Reeves <chrisr@spectralogic.com> Sponsored by: LSI, Spectra Logic Relnotes: LSI 12Gb SAS driver mpr(4) added ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265237 | ken | 2014-05-02 14:36:20 -0600 (Fri, 02 May 2014) | 8 lines Add the mpr(4) man page to the man4 Makefile. This should have been included in r265236. Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> MFC after: 3 days Sponsored by: LSI, Spectra Logic ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265241 | brueffer | 2014-05-02 15:14:28 -0600 (Fri, 02 May 2014) | 2 lines Use our standard SYNOPSIS wording; perform some cleanup while here. ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265261 | brueffer | 2014-05-03 05:15:28 -0600 (Sat, 03 May 2014) | 2 lines Add a missing colon. ------------------------------------------------------------------------ Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> Tested by: Chris Reeves <chrisr@spectralogic.com> Sponsored by: LSI, Spectra Logic Relnotes: LSI 12Gb SAS driver mpr(4) added diff 265388 Mon May 05 20:43:36 MDT 2014 ken MFC the mpr(4) driver for LSI's 12Gb SAS cards. This includes r265236, r265237, r265241 and r265261: ------------------------------------------------------------------------ r265236 | ken | 2014-05-02 14:25:09 -0600 (Fri, 02 May 2014) | 51 lines Bring in the mpr(4) driver for LSI's MPT3 12Gb SAS controllers. This is derived from the mps(4) driver, but it supports only the 12Gb IT and IR hardware including the SAS 3004, SAS 3008 and SAS 3108. Some notes about this driver: o The 12Gb hardware can do "FastPath" I/O, and that capability is included in this driver. o WarpDrive functionality has been removed, since it isn't supported in the 12Gb driver interface. o The Scatter/Gather list handling code is significantly different between the 6Gb and 12Gb hardware. The 12Gb boards support IEEE Scatter/Gather lists. Thanks to LSI for developing and testing this driver for FreeBSD. share/man/man4/mpr.4: mpr(4) man page. sys/dev/mpr/*: mpr(4) driver files. sys/modules/Makefile, sys/modules/mpr/Makefile: Add a module Makefile for the mpr(4) driver. sys/conf/files: Add the mpr(4) driver. sys/amd64/conf/GENERIC, sys/i386/conf/GENERIC, sys/mips/conf/OCTEON1, sys/sparc64/conf/GENERIC: Add the mpr(4) driver to all config files that currently have the mps(4) driver. sys/ia64/conf/GENERIC: Add the mps(4) and mpr(4) drivers to the ia64 GENERIC config file. sys/i386/conf/XEN: Exclude the mpr module from building here. Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> Tested by: Chris Reeves <chrisr@spectralogic.com> Sponsored by: LSI, Spectra Logic Relnotes: LSI 12Gb SAS driver mpr(4) added ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265237 | ken | 2014-05-02 14:36:20 -0600 (Fri, 02 May 2014) | 8 lines Add the mpr(4) man page to the man4 Makefile. This should have been included in r265236. Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> MFC after: 3 days Sponsored by: LSI, Spectra Logic ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265241 | brueffer | 2014-05-02 15:14:28 -0600 (Fri, 02 May 2014) | 2 lines Use our standard SYNOPSIS wording; perform some cleanup while here. ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265261 | brueffer | 2014-05-03 05:15:28 -0600 (Sat, 03 May 2014) | 2 lines Add a missing colon. ------------------------------------------------------------------------ Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> Tested by: Chris Reeves <chrisr@spectralogic.com> Sponsored by: LSI, Spectra Logic Relnotes: LSI 12Gb SAS driver mpr(4) added diff 265388 Mon May 05 20:43:36 MDT 2014 ken MFC the mpr(4) driver for LSI's 12Gb SAS cards. This includes r265236, r265237, r265241 and r265261: ------------------------------------------------------------------------ r265236 | ken | 2014-05-02 14:25:09 -0600 (Fri, 02 May 2014) | 51 lines Bring in the mpr(4) driver for LSI's MPT3 12Gb SAS controllers. This is derived from the mps(4) driver, but it supports only the 12Gb IT and IR hardware including the SAS 3004, SAS 3008 and SAS 3108. Some notes about this driver: o The 12Gb hardware can do "FastPath" I/O, and that capability is included in this driver. o WarpDrive functionality has been removed, since it isn't supported in the 12Gb driver interface. o The Scatter/Gather list handling code is significantly different between the 6Gb and 12Gb hardware. The 12Gb boards support IEEE Scatter/Gather lists. Thanks to LSI for developing and testing this driver for FreeBSD. share/man/man4/mpr.4: mpr(4) man page. sys/dev/mpr/*: mpr(4) driver files. sys/modules/Makefile, sys/modules/mpr/Makefile: Add a module Makefile for the mpr(4) driver. sys/conf/files: Add the mpr(4) driver. sys/amd64/conf/GENERIC, sys/i386/conf/GENERIC, sys/mips/conf/OCTEON1, sys/sparc64/conf/GENERIC: Add the mpr(4) driver to all config files that currently have the mps(4) driver. sys/ia64/conf/GENERIC: Add the mps(4) and mpr(4) drivers to the ia64 GENERIC config file. sys/i386/conf/XEN: Exclude the mpr module from building here. Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> Tested by: Chris Reeves <chrisr@spectralogic.com> Sponsored by: LSI, Spectra Logic Relnotes: LSI 12Gb SAS driver mpr(4) added ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265237 | ken | 2014-05-02 14:36:20 -0600 (Fri, 02 May 2014) | 8 lines Add the mpr(4) man page to the man4 Makefile. This should have been included in r265236. Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> MFC after: 3 days Sponsored by: LSI, Spectra Logic ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265241 | brueffer | 2014-05-02 15:14:28 -0600 (Fri, 02 May 2014) | 2 lines Use our standard SYNOPSIS wording; perform some cleanup while here. ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265261 | brueffer | 2014-05-03 05:15:28 -0600 (Sat, 03 May 2014) | 2 lines Add a missing colon. ------------------------------------------------------------------------ Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> Tested by: Chris Reeves <chrisr@spectralogic.com> Sponsored by: LSI, Spectra Logic Relnotes: LSI 12Gb SAS driver mpr(4) added diff 265388 Mon May 05 20:43:36 MDT 2014 ken MFC the mpr(4) driver for LSI's 12Gb SAS cards. This includes r265236, r265237, r265241 and r265261: ------------------------------------------------------------------------ r265236 | ken | 2014-05-02 14:25:09 -0600 (Fri, 02 May 2014) | 51 lines Bring in the mpr(4) driver for LSI's MPT3 12Gb SAS controllers. This is derived from the mps(4) driver, but it supports only the 12Gb IT and IR hardware including the SAS 3004, SAS 3008 and SAS 3108. Some notes about this driver: o The 12Gb hardware can do "FastPath" I/O, and that capability is included in this driver. o WarpDrive functionality has been removed, since it isn't supported in the 12Gb driver interface. o The Scatter/Gather list handling code is significantly different between the 6Gb and 12Gb hardware. The 12Gb boards support IEEE Scatter/Gather lists. Thanks to LSI for developing and testing this driver for FreeBSD. share/man/man4/mpr.4: mpr(4) man page. sys/dev/mpr/*: mpr(4) driver files. sys/modules/Makefile, sys/modules/mpr/Makefile: Add a module Makefile for the mpr(4) driver. sys/conf/files: Add the mpr(4) driver. sys/amd64/conf/GENERIC, sys/i386/conf/GENERIC, sys/mips/conf/OCTEON1, sys/sparc64/conf/GENERIC: Add the mpr(4) driver to all config files that currently have the mps(4) driver. sys/ia64/conf/GENERIC: Add the mps(4) and mpr(4) drivers to the ia64 GENERIC config file. sys/i386/conf/XEN: Exclude the mpr module from building here. Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> Tested by: Chris Reeves <chrisr@spectralogic.com> Sponsored by: LSI, Spectra Logic Relnotes: LSI 12Gb SAS driver mpr(4) added ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265237 | ken | 2014-05-02 14:36:20 -0600 (Fri, 02 May 2014) | 8 lines Add the mpr(4) man page to the man4 Makefile. This should have been included in r265236. Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> MFC after: 3 days Sponsored by: LSI, Spectra Logic ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265241 | brueffer | 2014-05-02 15:14:28 -0600 (Fri, 02 May 2014) | 2 lines Use our standard SYNOPSIS wording; perform some cleanup while here. ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265261 | brueffer | 2014-05-03 05:15:28 -0600 (Sat, 03 May 2014) | 2 lines Add a missing colon. ------------------------------------------------------------------------ Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> Tested by: Chris Reeves <chrisr@spectralogic.com> Sponsored by: LSI, Spectra Logic Relnotes: LSI 12Gb SAS driver mpr(4) added diff 265388 Mon May 05 20:43:36 MDT 2014 ken MFC the mpr(4) driver for LSI's 12Gb SAS cards. This includes r265236, r265237, r265241 and r265261: ------------------------------------------------------------------------ r265236 | ken | 2014-05-02 14:25:09 -0600 (Fri, 02 May 2014) | 51 lines Bring in the mpr(4) driver for LSI's MPT3 12Gb SAS controllers. This is derived from the mps(4) driver, but it supports only the 12Gb IT and IR hardware including the SAS 3004, SAS 3008 and SAS 3108. Some notes about this driver: o The 12Gb hardware can do "FastPath" I/O, and that capability is included in this driver. o WarpDrive functionality has been removed, since it isn't supported in the 12Gb driver interface. o The Scatter/Gather list handling code is significantly different between the 6Gb and 12Gb hardware. The 12Gb boards support IEEE Scatter/Gather lists. Thanks to LSI for developing and testing this driver for FreeBSD. share/man/man4/mpr.4: mpr(4) man page. sys/dev/mpr/*: mpr(4) driver files. sys/modules/Makefile, sys/modules/mpr/Makefile: Add a module Makefile for the mpr(4) driver. sys/conf/files: Add the mpr(4) driver. sys/amd64/conf/GENERIC, sys/i386/conf/GENERIC, sys/mips/conf/OCTEON1, sys/sparc64/conf/GENERIC: Add the mpr(4) driver to all config files that currently have the mps(4) driver. sys/ia64/conf/GENERIC: Add the mps(4) and mpr(4) drivers to the ia64 GENERIC config file. sys/i386/conf/XEN: Exclude the mpr module from building here. Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> Tested by: Chris Reeves <chrisr@spectralogic.com> Sponsored by: LSI, Spectra Logic Relnotes: LSI 12Gb SAS driver mpr(4) added ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265237 | ken | 2014-05-02 14:36:20 -0600 (Fri, 02 May 2014) | 8 lines Add the mpr(4) man page to the man4 Makefile. This should have been included in r265236. Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> MFC after: 3 days Sponsored by: LSI, Spectra Logic ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265241 | brueffer | 2014-05-02 15:14:28 -0600 (Fri, 02 May 2014) | 2 lines Use our standard SYNOPSIS wording; perform some cleanup while here. ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265261 | brueffer | 2014-05-03 05:15:28 -0600 (Sat, 03 May 2014) | 2 lines Add a missing colon. ------------------------------------------------------------------------ Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> Tested by: Chris Reeves <chrisr@spectralogic.com> Sponsored by: LSI, Spectra Logic Relnotes: LSI 12Gb SAS driver mpr(4) added diff 265388 Mon May 05 20:43:36 MDT 2014 ken MFC the mpr(4) driver for LSI's 12Gb SAS cards. This includes r265236, r265237, r265241 and r265261: ------------------------------------------------------------------------ r265236 | ken | 2014-05-02 14:25:09 -0600 (Fri, 02 May 2014) | 51 lines Bring in the mpr(4) driver for LSI's MPT3 12Gb SAS controllers. This is derived from the mps(4) driver, but it supports only the 12Gb IT and IR hardware including the SAS 3004, SAS 3008 and SAS 3108. Some notes about this driver: o The 12Gb hardware can do "FastPath" I/O, and that capability is included in this driver. o WarpDrive functionality has been removed, since it isn't supported in the 12Gb driver interface. o The Scatter/Gather list handling code is significantly different between the 6Gb and 12Gb hardware. The 12Gb boards support IEEE Scatter/Gather lists. Thanks to LSI for developing and testing this driver for FreeBSD. share/man/man4/mpr.4: mpr(4) man page. sys/dev/mpr/*: mpr(4) driver files. sys/modules/Makefile, sys/modules/mpr/Makefile: Add a module Makefile for the mpr(4) driver. sys/conf/files: Add the mpr(4) driver. sys/amd64/conf/GENERIC, sys/i386/conf/GENERIC, sys/mips/conf/OCTEON1, sys/sparc64/conf/GENERIC: Add the mpr(4) driver to all config files that currently have the mps(4) driver. sys/ia64/conf/GENERIC: Add the mps(4) and mpr(4) drivers to the ia64 GENERIC config file. sys/i386/conf/XEN: Exclude the mpr module from building here. Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> Tested by: Chris Reeves <chrisr@spectralogic.com> Sponsored by: LSI, Spectra Logic Relnotes: LSI 12Gb SAS driver mpr(4) added ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265237 | ken | 2014-05-02 14:36:20 -0600 (Fri, 02 May 2014) | 8 lines Add the mpr(4) man page to the man4 Makefile. This should have been included in r265236. Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> MFC after: 3 days Sponsored by: LSI, Spectra Logic ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265241 | brueffer | 2014-05-02 15:14:28 -0600 (Fri, 02 May 2014) | 2 lines Use our standard SYNOPSIS wording; perform some cleanup while here. ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265261 | brueffer | 2014-05-03 05:15:28 -0600 (Sat, 03 May 2014) | 2 lines Add a missing colon. ------------------------------------------------------------------------ Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> Tested by: Chris Reeves <chrisr@spectralogic.com> Sponsored by: LSI, Spectra Logic Relnotes: LSI 12Gb SAS driver mpr(4) added diff 265388 Mon May 05 20:43:36 MDT 2014 ken MFC the mpr(4) driver for LSI's 12Gb SAS cards. This includes r265236, r265237, r265241 and r265261: ------------------------------------------------------------------------ r265236 | ken | 2014-05-02 14:25:09 -0600 (Fri, 02 May 2014) | 51 lines Bring in the mpr(4) driver for LSI's MPT3 12Gb SAS controllers. This is derived from the mps(4) driver, but it supports only the 12Gb IT and IR hardware including the SAS 3004, SAS 3008 and SAS 3108. Some notes about this driver: o The 12Gb hardware can do "FastPath" I/O, and that capability is included in this driver. o WarpDrive functionality has been removed, since it isn't supported in the 12Gb driver interface. o The Scatter/Gather list handling code is significantly different between the 6Gb and 12Gb hardware. The 12Gb boards support IEEE Scatter/Gather lists. Thanks to LSI for developing and testing this driver for FreeBSD. share/man/man4/mpr.4: mpr(4) man page. sys/dev/mpr/*: mpr(4) driver files. sys/modules/Makefile, sys/modules/mpr/Makefile: Add a module Makefile for the mpr(4) driver. sys/conf/files: Add the mpr(4) driver. sys/amd64/conf/GENERIC, sys/i386/conf/GENERIC, sys/mips/conf/OCTEON1, sys/sparc64/conf/GENERIC: Add the mpr(4) driver to all config files that currently have the mps(4) driver. sys/ia64/conf/GENERIC: Add the mps(4) and mpr(4) drivers to the ia64 GENERIC config file. sys/i386/conf/XEN: Exclude the mpr module from building here. Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> Tested by: Chris Reeves <chrisr@spectralogic.com> Sponsored by: LSI, Spectra Logic Relnotes: LSI 12Gb SAS driver mpr(4) added ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265237 | ken | 2014-05-02 14:36:20 -0600 (Fri, 02 May 2014) | 8 lines Add the mpr(4) man page to the man4 Makefile. This should have been included in r265236. Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> MFC after: 3 days Sponsored by: LSI, Spectra Logic ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265241 | brueffer | 2014-05-02 15:14:28 -0600 (Fri, 02 May 2014) | 2 lines Use our standard SYNOPSIS wording; perform some cleanup while here. ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265261 | brueffer | 2014-05-03 05:15:28 -0600 (Sat, 03 May 2014) | 2 lines Add a missing colon. ------------------------------------------------------------------------ Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> Tested by: Chris Reeves <chrisr@spectralogic.com> Sponsored by: LSI, Spectra Logic Relnotes: LSI 12Gb SAS driver mpr(4) added diff 265388 Mon May 05 20:43:36 MDT 2014 ken MFC the mpr(4) driver for LSI's 12Gb SAS cards. This includes r265236, r265237, r265241 and r265261: ------------------------------------------------------------------------ r265236 | ken | 2014-05-02 14:25:09 -0600 (Fri, 02 May 2014) | 51 lines Bring in the mpr(4) driver for LSI's MPT3 12Gb SAS controllers. This is derived from the mps(4) driver, but it supports only the 12Gb IT and IR hardware including the SAS 3004, SAS 3008 and SAS 3108. Some notes about this driver: o The 12Gb hardware can do "FastPath" I/O, and that capability is included in this driver. o WarpDrive functionality has been removed, since it isn't supported in the 12Gb driver interface. o The Scatter/Gather list handling code is significantly different between the 6Gb and 12Gb hardware. The 12Gb boards support IEEE Scatter/Gather lists. Thanks to LSI for developing and testing this driver for FreeBSD. share/man/man4/mpr.4: mpr(4) man page. sys/dev/mpr/*: mpr(4) driver files. sys/modules/Makefile, sys/modules/mpr/Makefile: Add a module Makefile for the mpr(4) driver. sys/conf/files: Add the mpr(4) driver. sys/amd64/conf/GENERIC, sys/i386/conf/GENERIC, sys/mips/conf/OCTEON1, sys/sparc64/conf/GENERIC: Add the mpr(4) driver to all config files that currently have the mps(4) driver. sys/ia64/conf/GENERIC: Add the mps(4) and mpr(4) drivers to the ia64 GENERIC config file. sys/i386/conf/XEN: Exclude the mpr module from building here. Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> Tested by: Chris Reeves <chrisr@spectralogic.com> Sponsored by: LSI, Spectra Logic Relnotes: LSI 12Gb SAS driver mpr(4) added ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265237 | ken | 2014-05-02 14:36:20 -0600 (Fri, 02 May 2014) | 8 lines Add the mpr(4) man page to the man4 Makefile. This should have been included in r265236. Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> MFC after: 3 days Sponsored by: LSI, Spectra Logic ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265241 | brueffer | 2014-05-02 15:14:28 -0600 (Fri, 02 May 2014) | 2 lines Use our standard SYNOPSIS wording; perform some cleanup while here. ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265261 | brueffer | 2014-05-03 05:15:28 -0600 (Sat, 03 May 2014) | 2 lines Add a missing colon. ------------------------------------------------------------------------ Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> Tested by: Chris Reeves <chrisr@spectralogic.com> Sponsored by: LSI, Spectra Logic Relnotes: LSI 12Gb SAS driver mpr(4) added |
| H A D | mpi2_sas.h | diff 265388 Mon May 05 20:43:36 MDT 2014 ken MFC the mpr(4) driver for LSI's 12Gb SAS cards. This includes r265236, r265237, r265241 and r265261: ------------------------------------------------------------------------ r265236 | ken | 2014-05-02 14:25:09 -0600 (Fri, 02 May 2014) | 51 lines Bring in the mpr(4) driver for LSI's MPT3 12Gb SAS controllers. This is derived from the mps(4) driver, but it supports only the 12Gb IT and IR hardware including the SAS 3004, SAS 3008 and SAS 3108. Some notes about this driver: o The 12Gb hardware can do "FastPath" I/O, and that capability is included in this driver. o WarpDrive functionality has been removed, since it isn't supported in the 12Gb driver interface. o The Scatter/Gather list handling code is significantly different between the 6Gb and 12Gb hardware. The 12Gb boards support IEEE Scatter/Gather lists. Thanks to LSI for developing and testing this driver for FreeBSD. share/man/man4/mpr.4: mpr(4) man page. sys/dev/mpr/*: mpr(4) driver files. sys/modules/Makefile, sys/modules/mpr/Makefile: Add a module Makefile for the mpr(4) driver. sys/conf/files: Add the mpr(4) driver. sys/amd64/conf/GENERIC, sys/i386/conf/GENERIC, sys/mips/conf/OCTEON1, sys/sparc64/conf/GENERIC: Add the mpr(4) driver to all config files that currently have the mps(4) driver. sys/ia64/conf/GENERIC: Add the mps(4) and mpr(4) drivers to the ia64 GENERIC config file. sys/i386/conf/XEN: Exclude the mpr module from building here. Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> Tested by: Chris Reeves <chrisr@spectralogic.com> Sponsored by: LSI, Spectra Logic Relnotes: LSI 12Gb SAS driver mpr(4) added ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265237 | ken | 2014-05-02 14:36:20 -0600 (Fri, 02 May 2014) | 8 lines Add the mpr(4) man page to the man4 Makefile. This should have been included in r265236. Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> MFC after: 3 days Sponsored by: LSI, Spectra Logic ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265241 | brueffer | 2014-05-02 15:14:28 -0600 (Fri, 02 May 2014) | 2 lines Use our standard SYNOPSIS wording; perform some cleanup while here. ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265261 | brueffer | 2014-05-03 05:15:28 -0600 (Sat, 03 May 2014) | 2 lines Add a missing colon. ------------------------------------------------------------------------ Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> Tested by: Chris Reeves <chrisr@spectralogic.com> Sponsored by: LSI, Spectra Logic Relnotes: LSI 12Gb SAS driver mpr(4) added diff 265388 Mon May 05 20:43:36 MDT 2014 ken MFC the mpr(4) driver for LSI's 12Gb SAS cards. This includes r265236, r265237, r265241 and r265261: ------------------------------------------------------------------------ r265236 | ken | 2014-05-02 14:25:09 -0600 (Fri, 02 May 2014) | 51 lines Bring in the mpr(4) driver for LSI's MPT3 12Gb SAS controllers. This is derived from the mps(4) driver, but it supports only the 12Gb IT and IR hardware including the SAS 3004, SAS 3008 and SAS 3108. Some notes about this driver: o The 12Gb hardware can do "FastPath" I/O, and that capability is included in this driver. o WarpDrive functionality has been removed, since it isn't supported in the 12Gb driver interface. o The Scatter/Gather list handling code is significantly different between the 6Gb and 12Gb hardware. The 12Gb boards support IEEE Scatter/Gather lists. Thanks to LSI for developing and testing this driver for FreeBSD. share/man/man4/mpr.4: mpr(4) man page. sys/dev/mpr/*: mpr(4) driver files. sys/modules/Makefile, sys/modules/mpr/Makefile: Add a module Makefile for the mpr(4) driver. sys/conf/files: Add the mpr(4) driver. sys/amd64/conf/GENERIC, sys/i386/conf/GENERIC, sys/mips/conf/OCTEON1, sys/sparc64/conf/GENERIC: Add the mpr(4) driver to all config files that currently have the mps(4) driver. sys/ia64/conf/GENERIC: Add the mps(4) and mpr(4) drivers to the ia64 GENERIC config file. sys/i386/conf/XEN: Exclude the mpr module from building here. Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> Tested by: Chris Reeves <chrisr@spectralogic.com> Sponsored by: LSI, Spectra Logic Relnotes: LSI 12Gb SAS driver mpr(4) added ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265237 | ken | 2014-05-02 14:36:20 -0600 (Fri, 02 May 2014) | 8 lines Add the mpr(4) man page to the man4 Makefile. This should have been included in r265236. Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> MFC after: 3 days Sponsored by: LSI, Spectra Logic ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265241 | brueffer | 2014-05-02 15:14:28 -0600 (Fri, 02 May 2014) | 2 lines Use our standard SYNOPSIS wording; perform some cleanup while here. ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265261 | brueffer | 2014-05-03 05:15:28 -0600 (Sat, 03 May 2014) | 2 lines Add a missing colon. ------------------------------------------------------------------------ Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> Tested by: Chris Reeves <chrisr@spectralogic.com> Sponsored by: LSI, Spectra Logic Relnotes: LSI 12Gb SAS driver mpr(4) added diff 265388 Mon May 05 20:43:36 MDT 2014 ken MFC the mpr(4) driver for LSI's 12Gb SAS cards. This includes r265236, r265237, r265241 and r265261: ------------------------------------------------------------------------ r265236 | ken | 2014-05-02 14:25:09 -0600 (Fri, 02 May 2014) | 51 lines Bring in the mpr(4) driver for LSI's MPT3 12Gb SAS controllers. This is derived from the mps(4) driver, but it supports only the 12Gb IT and IR hardware including the SAS 3004, SAS 3008 and SAS 3108. Some notes about this driver: o The 12Gb hardware can do "FastPath" I/O, and that capability is included in this driver. o WarpDrive functionality has been removed, since it isn't supported in the 12Gb driver interface. o The Scatter/Gather list handling code is significantly different between the 6Gb and 12Gb hardware. The 12Gb boards support IEEE Scatter/Gather lists. Thanks to LSI for developing and testing this driver for FreeBSD. share/man/man4/mpr.4: mpr(4) man page. sys/dev/mpr/*: mpr(4) driver files. sys/modules/Makefile, sys/modules/mpr/Makefile: Add a module Makefile for the mpr(4) driver. sys/conf/files: Add the mpr(4) driver. sys/amd64/conf/GENERIC, sys/i386/conf/GENERIC, sys/mips/conf/OCTEON1, sys/sparc64/conf/GENERIC: Add the mpr(4) driver to all config files that currently have the mps(4) driver. sys/ia64/conf/GENERIC: Add the mps(4) and mpr(4) drivers to the ia64 GENERIC config file. sys/i386/conf/XEN: Exclude the mpr module from building here. Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> Tested by: Chris Reeves <chrisr@spectralogic.com> Sponsored by: LSI, Spectra Logic Relnotes: LSI 12Gb SAS driver mpr(4) added ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265237 | ken | 2014-05-02 14:36:20 -0600 (Fri, 02 May 2014) | 8 lines Add the mpr(4) man page to the man4 Makefile. This should have been included in r265236. Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> MFC after: 3 days Sponsored by: LSI, Spectra Logic ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265241 | brueffer | 2014-05-02 15:14:28 -0600 (Fri, 02 May 2014) | 2 lines Use our standard SYNOPSIS wording; perform some cleanup while here. ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265261 | brueffer | 2014-05-03 05:15:28 -0600 (Sat, 03 May 2014) | 2 lines Add a missing colon. ------------------------------------------------------------------------ Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> Tested by: Chris Reeves <chrisr@spectralogic.com> Sponsored by: LSI, Spectra Logic Relnotes: LSI 12Gb SAS driver mpr(4) added diff 265388 Mon May 05 20:43:36 MDT 2014 ken MFC the mpr(4) driver for LSI's 12Gb SAS cards. This includes r265236, r265237, r265241 and r265261: ------------------------------------------------------------------------ r265236 | ken | 2014-05-02 14:25:09 -0600 (Fri, 02 May 2014) | 51 lines Bring in the mpr(4) driver for LSI's MPT3 12Gb SAS controllers. This is derived from the mps(4) driver, but it supports only the 12Gb IT and IR hardware including the SAS 3004, SAS 3008 and SAS 3108. Some notes about this driver: o The 12Gb hardware can do "FastPath" I/O, and that capability is included in this driver. o WarpDrive functionality has been removed, since it isn't supported in the 12Gb driver interface. o The Scatter/Gather list handling code is significantly different between the 6Gb and 12Gb hardware. The 12Gb boards support IEEE Scatter/Gather lists. Thanks to LSI for developing and testing this driver for FreeBSD. share/man/man4/mpr.4: mpr(4) man page. sys/dev/mpr/*: mpr(4) driver files. sys/modules/Makefile, sys/modules/mpr/Makefile: Add a module Makefile for the mpr(4) driver. sys/conf/files: Add the mpr(4) driver. sys/amd64/conf/GENERIC, sys/i386/conf/GENERIC, sys/mips/conf/OCTEON1, sys/sparc64/conf/GENERIC: Add the mpr(4) driver to all config files that currently have the mps(4) driver. sys/ia64/conf/GENERIC: Add the mps(4) and mpr(4) drivers to the ia64 GENERIC config file. sys/i386/conf/XEN: Exclude the mpr module from building here. Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> Tested by: Chris Reeves <chrisr@spectralogic.com> Sponsored by: LSI, Spectra Logic Relnotes: LSI 12Gb SAS driver mpr(4) added ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265237 | ken | 2014-05-02 14:36:20 -0600 (Fri, 02 May 2014) | 8 lines Add the mpr(4) man page to the man4 Makefile. This should have been included in r265236. Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> MFC after: 3 days Sponsored by: LSI, Spectra Logic ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265241 | brueffer | 2014-05-02 15:14:28 -0600 (Fri, 02 May 2014) | 2 lines Use our standard SYNOPSIS wording; perform some cleanup while here. ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265261 | brueffer | 2014-05-03 05:15:28 -0600 (Sat, 03 May 2014) | 2 lines Add a missing colon. ------------------------------------------------------------------------ Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> Tested by: Chris Reeves <chrisr@spectralogic.com> Sponsored by: LSI, Spectra Logic Relnotes: LSI 12Gb SAS driver mpr(4) added diff 265388 Mon May 05 20:43:36 MDT 2014 ken MFC the mpr(4) driver for LSI's 12Gb SAS cards. This includes r265236, r265237, r265241 and r265261: ------------------------------------------------------------------------ r265236 | ken | 2014-05-02 14:25:09 -0600 (Fri, 02 May 2014) | 51 lines Bring in the mpr(4) driver for LSI's MPT3 12Gb SAS controllers. This is derived from the mps(4) driver, but it supports only the 12Gb IT and IR hardware including the SAS 3004, SAS 3008 and SAS 3108. Some notes about this driver: o The 12Gb hardware can do "FastPath" I/O, and that capability is included in this driver. o WarpDrive functionality has been removed, since it isn't supported in the 12Gb driver interface. o The Scatter/Gather list handling code is significantly different between the 6Gb and 12Gb hardware. The 12Gb boards support IEEE Scatter/Gather lists. Thanks to LSI for developing and testing this driver for FreeBSD. share/man/man4/mpr.4: mpr(4) man page. sys/dev/mpr/*: mpr(4) driver files. sys/modules/Makefile, sys/modules/mpr/Makefile: Add a module Makefile for the mpr(4) driver. sys/conf/files: Add the mpr(4) driver. sys/amd64/conf/GENERIC, sys/i386/conf/GENERIC, sys/mips/conf/OCTEON1, sys/sparc64/conf/GENERIC: Add the mpr(4) driver to all config files that currently have the mps(4) driver. sys/ia64/conf/GENERIC: Add the mps(4) and mpr(4) drivers to the ia64 GENERIC config file. sys/i386/conf/XEN: Exclude the mpr module from building here. Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> Tested by: Chris Reeves <chrisr@spectralogic.com> Sponsored by: LSI, Spectra Logic Relnotes: LSI 12Gb SAS driver mpr(4) added ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265237 | ken | 2014-05-02 14:36:20 -0600 (Fri, 02 May 2014) | 8 lines Add the mpr(4) man page to the man4 Makefile. This should have been included in r265236. Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> MFC after: 3 days Sponsored by: LSI, Spectra Logic ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265241 | brueffer | 2014-05-02 15:14:28 -0600 (Fri, 02 May 2014) | 2 lines Use our standard SYNOPSIS wording; perform some cleanup while here. ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265261 | brueffer | 2014-05-03 05:15:28 -0600 (Sat, 03 May 2014) | 2 lines Add a missing colon. ------------------------------------------------------------------------ Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> Tested by: Chris Reeves <chrisr@spectralogic.com> Sponsored by: LSI, Spectra Logic Relnotes: LSI 12Gb SAS driver mpr(4) added diff 265388 Mon May 05 20:43:36 MDT 2014 ken MFC the mpr(4) driver for LSI's 12Gb SAS cards. This includes r265236, r265237, r265241 and r265261: ------------------------------------------------------------------------ r265236 | ken | 2014-05-02 14:25:09 -0600 (Fri, 02 May 2014) | 51 lines Bring in the mpr(4) driver for LSI's MPT3 12Gb SAS controllers. This is derived from the mps(4) driver, but it supports only the 12Gb IT and IR hardware including the SAS 3004, SAS 3008 and SAS 3108. Some notes about this driver: o The 12Gb hardware can do "FastPath" I/O, and that capability is included in this driver. o WarpDrive functionality has been removed, since it isn't supported in the 12Gb driver interface. o The Scatter/Gather list handling code is significantly different between the 6Gb and 12Gb hardware. The 12Gb boards support IEEE Scatter/Gather lists. Thanks to LSI for developing and testing this driver for FreeBSD. share/man/man4/mpr.4: mpr(4) man page. sys/dev/mpr/*: mpr(4) driver files. sys/modules/Makefile, sys/modules/mpr/Makefile: Add a module Makefile for the mpr(4) driver. sys/conf/files: Add the mpr(4) driver. sys/amd64/conf/GENERIC, sys/i386/conf/GENERIC, sys/mips/conf/OCTEON1, sys/sparc64/conf/GENERIC: Add the mpr(4) driver to all config files that currently have the mps(4) driver. sys/ia64/conf/GENERIC: Add the mps(4) and mpr(4) drivers to the ia64 GENERIC config file. sys/i386/conf/XEN: Exclude the mpr module from building here. Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> Tested by: Chris Reeves <chrisr@spectralogic.com> Sponsored by: LSI, Spectra Logic Relnotes: LSI 12Gb SAS driver mpr(4) added ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265237 | ken | 2014-05-02 14:36:20 -0600 (Fri, 02 May 2014) | 8 lines Add the mpr(4) man page to the man4 Makefile. This should have been included in r265236. Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> MFC after: 3 days Sponsored by: LSI, Spectra Logic ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265241 | brueffer | 2014-05-02 15:14:28 -0600 (Fri, 02 May 2014) | 2 lines Use our standard SYNOPSIS wording; perform some cleanup while here. ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265261 | brueffer | 2014-05-03 05:15:28 -0600 (Sat, 03 May 2014) | 2 lines Add a missing colon. ------------------------------------------------------------------------ Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> Tested by: Chris Reeves <chrisr@spectralogic.com> Sponsored by: LSI, Spectra Logic Relnotes: LSI 12Gb SAS driver mpr(4) added diff 265388 Mon May 05 20:43:36 MDT 2014 ken MFC the mpr(4) driver for LSI's 12Gb SAS cards. This includes r265236, r265237, r265241 and r265261: ------------------------------------------------------------------------ r265236 | ken | 2014-05-02 14:25:09 -0600 (Fri, 02 May 2014) | 51 lines Bring in the mpr(4) driver for LSI's MPT3 12Gb SAS controllers. This is derived from the mps(4) driver, but it supports only the 12Gb IT and IR hardware including the SAS 3004, SAS 3008 and SAS 3108. Some notes about this driver: o The 12Gb hardware can do "FastPath" I/O, and that capability is included in this driver. o WarpDrive functionality has been removed, since it isn't supported in the 12Gb driver interface. o The Scatter/Gather list handling code is significantly different between the 6Gb and 12Gb hardware. The 12Gb boards support IEEE Scatter/Gather lists. Thanks to LSI for developing and testing this driver for FreeBSD. share/man/man4/mpr.4: mpr(4) man page. sys/dev/mpr/*: mpr(4) driver files. sys/modules/Makefile, sys/modules/mpr/Makefile: Add a module Makefile for the mpr(4) driver. sys/conf/files: Add the mpr(4) driver. sys/amd64/conf/GENERIC, sys/i386/conf/GENERIC, sys/mips/conf/OCTEON1, sys/sparc64/conf/GENERIC: Add the mpr(4) driver to all config files that currently have the mps(4) driver. sys/ia64/conf/GENERIC: Add the mps(4) and mpr(4) drivers to the ia64 GENERIC config file. sys/i386/conf/XEN: Exclude the mpr module from building here. Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> Tested by: Chris Reeves <chrisr@spectralogic.com> Sponsored by: LSI, Spectra Logic Relnotes: LSI 12Gb SAS driver mpr(4) added ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265237 | ken | 2014-05-02 14:36:20 -0600 (Fri, 02 May 2014) | 8 lines Add the mpr(4) man page to the man4 Makefile. This should have been included in r265236. Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> MFC after: 3 days Sponsored by: LSI, Spectra Logic ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265241 | brueffer | 2014-05-02 15:14:28 -0600 (Fri, 02 May 2014) | 2 lines Use our standard SYNOPSIS wording; perform some cleanup while here. ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265261 | brueffer | 2014-05-03 05:15:28 -0600 (Sat, 03 May 2014) | 2 lines Add a missing colon. ------------------------------------------------------------------------ Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> Tested by: Chris Reeves <chrisr@spectralogic.com> Sponsored by: LSI, Spectra Logic Relnotes: LSI 12Gb SAS driver mpr(4) added diff 265388 Mon May 05 20:43:36 MDT 2014 ken MFC the mpr(4) driver for LSI's 12Gb SAS cards. This includes r265236, r265237, r265241 and r265261: ------------------------------------------------------------------------ r265236 | ken | 2014-05-02 14:25:09 -0600 (Fri, 02 May 2014) | 51 lines Bring in the mpr(4) driver for LSI's MPT3 12Gb SAS controllers. This is derived from the mps(4) driver, but it supports only the 12Gb IT and IR hardware including the SAS 3004, SAS 3008 and SAS 3108. Some notes about this driver: o The 12Gb hardware can do "FastPath" I/O, and that capability is included in this driver. o WarpDrive functionality has been removed, since it isn't supported in the 12Gb driver interface. o The Scatter/Gather list handling code is significantly different between the 6Gb and 12Gb hardware. The 12Gb boards support IEEE Scatter/Gather lists. Thanks to LSI for developing and testing this driver for FreeBSD. share/man/man4/mpr.4: mpr(4) man page. sys/dev/mpr/*: mpr(4) driver files. sys/modules/Makefile, sys/modules/mpr/Makefile: Add a module Makefile for the mpr(4) driver. sys/conf/files: Add the mpr(4) driver. sys/amd64/conf/GENERIC, sys/i386/conf/GENERIC, sys/mips/conf/OCTEON1, sys/sparc64/conf/GENERIC: Add the mpr(4) driver to all config files that currently have the mps(4) driver. sys/ia64/conf/GENERIC: Add the mps(4) and mpr(4) drivers to the ia64 GENERIC config file. sys/i386/conf/XEN: Exclude the mpr module from building here. Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> Tested by: Chris Reeves <chrisr@spectralogic.com> Sponsored by: LSI, Spectra Logic Relnotes: LSI 12Gb SAS driver mpr(4) added ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265237 | ken | 2014-05-02 14:36:20 -0600 (Fri, 02 May 2014) | 8 lines Add the mpr(4) man page to the man4 Makefile. This should have been included in r265236. Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> MFC after: 3 days Sponsored by: LSI, Spectra Logic ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265241 | brueffer | 2014-05-02 15:14:28 -0600 (Fri, 02 May 2014) | 2 lines Use our standard SYNOPSIS wording; perform some cleanup while here. ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265261 | brueffer | 2014-05-03 05:15:28 -0600 (Sat, 03 May 2014) | 2 lines Add a missing colon. ------------------------------------------------------------------------ Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> Tested by: Chris Reeves <chrisr@spectralogic.com> Sponsored by: LSI, Spectra Logic Relnotes: LSI 12Gb SAS driver mpr(4) added diff 265388 Mon May 05 20:43:36 MDT 2014 ken MFC the mpr(4) driver for LSI's 12Gb SAS cards. This includes r265236, r265237, r265241 and r265261: ------------------------------------------------------------------------ r265236 | ken | 2014-05-02 14:25:09 -0600 (Fri, 02 May 2014) | 51 lines Bring in the mpr(4) driver for LSI's MPT3 12Gb SAS controllers. This is derived from the mps(4) driver, but it supports only the 12Gb IT and IR hardware including the SAS 3004, SAS 3008 and SAS 3108. Some notes about this driver: o The 12Gb hardware can do "FastPath" I/O, and that capability is included in this driver. o WarpDrive functionality has been removed, since it isn't supported in the 12Gb driver interface. o The Scatter/Gather list handling code is significantly different between the 6Gb and 12Gb hardware. The 12Gb boards support IEEE Scatter/Gather lists. Thanks to LSI for developing and testing this driver for FreeBSD. share/man/man4/mpr.4: mpr(4) man page. sys/dev/mpr/*: mpr(4) driver files. sys/modules/Makefile, sys/modules/mpr/Makefile: Add a module Makefile for the mpr(4) driver. sys/conf/files: Add the mpr(4) driver. sys/amd64/conf/GENERIC, sys/i386/conf/GENERIC, sys/mips/conf/OCTEON1, sys/sparc64/conf/GENERIC: Add the mpr(4) driver to all config files that currently have the mps(4) driver. sys/ia64/conf/GENERIC: Add the mps(4) and mpr(4) drivers to the ia64 GENERIC config file. sys/i386/conf/XEN: Exclude the mpr module from building here. Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> Tested by: Chris Reeves <chrisr@spectralogic.com> Sponsored by: LSI, Spectra Logic Relnotes: LSI 12Gb SAS driver mpr(4) added ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265237 | ken | 2014-05-02 14:36:20 -0600 (Fri, 02 May 2014) | 8 lines Add the mpr(4) man page to the man4 Makefile. This should have been included in r265236. Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> MFC after: 3 days Sponsored by: LSI, Spectra Logic ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265241 | brueffer | 2014-05-02 15:14:28 -0600 (Fri, 02 May 2014) | 2 lines Use our standard SYNOPSIS wording; perform some cleanup while here. ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265261 | brueffer | 2014-05-03 05:15:28 -0600 (Sat, 03 May 2014) | 2 lines Add a missing colon. ------------------------------------------------------------------------ Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> Tested by: Chris Reeves <chrisr@spectralogic.com> Sponsored by: LSI, Spectra Logic Relnotes: LSI 12Gb SAS driver mpr(4) added diff 265388 Mon May 05 20:43:36 MDT 2014 ken MFC the mpr(4) driver for LSI's 12Gb SAS cards. This includes r265236, r265237, r265241 and r265261: ------------------------------------------------------------------------ r265236 | ken | 2014-05-02 14:25:09 -0600 (Fri, 02 May 2014) | 51 lines Bring in the mpr(4) driver for LSI's MPT3 12Gb SAS controllers. This is derived from the mps(4) driver, but it supports only the 12Gb IT and IR hardware including the SAS 3004, SAS 3008 and SAS 3108. Some notes about this driver: o The 12Gb hardware can do "FastPath" I/O, and that capability is included in this driver. o WarpDrive functionality has been removed, since it isn't supported in the 12Gb driver interface. o The Scatter/Gather list handling code is significantly different between the 6Gb and 12Gb hardware. The 12Gb boards support IEEE Scatter/Gather lists. Thanks to LSI for developing and testing this driver for FreeBSD. share/man/man4/mpr.4: mpr(4) man page. sys/dev/mpr/*: mpr(4) driver files. sys/modules/Makefile, sys/modules/mpr/Makefile: Add a module Makefile for the mpr(4) driver. sys/conf/files: Add the mpr(4) driver. sys/amd64/conf/GENERIC, sys/i386/conf/GENERIC, sys/mips/conf/OCTEON1, sys/sparc64/conf/GENERIC: Add the mpr(4) driver to all config files that currently have the mps(4) driver. sys/ia64/conf/GENERIC: Add the mps(4) and mpr(4) drivers to the ia64 GENERIC config file. sys/i386/conf/XEN: Exclude the mpr module from building here. Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> Tested by: Chris Reeves <chrisr@spectralogic.com> Sponsored by: LSI, Spectra Logic Relnotes: LSI 12Gb SAS driver mpr(4) added ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265237 | ken | 2014-05-02 14:36:20 -0600 (Fri, 02 May 2014) | 8 lines Add the mpr(4) man page to the man4 Makefile. This should have been included in r265236. Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> MFC after: 3 days Sponsored by: LSI, Spectra Logic ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265241 | brueffer | 2014-05-02 15:14:28 -0600 (Fri, 02 May 2014) | 2 lines Use our standard SYNOPSIS wording; perform some cleanup while here. ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265261 | brueffer | 2014-05-03 05:15:28 -0600 (Sat, 03 May 2014) | 2 lines Add a missing colon. ------------------------------------------------------------------------ Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> Tested by: Chris Reeves <chrisr@spectralogic.com> Sponsored by: LSI, Spectra Logic Relnotes: LSI 12Gb SAS driver mpr(4) added diff 265388 Mon May 05 20:43:36 MDT 2014 ken MFC the mpr(4) driver for LSI's 12Gb SAS cards. This includes r265236, r265237, r265241 and r265261: ------------------------------------------------------------------------ r265236 | ken | 2014-05-02 14:25:09 -0600 (Fri, 02 May 2014) | 51 lines Bring in the mpr(4) driver for LSI's MPT3 12Gb SAS controllers. This is derived from the mps(4) driver, but it supports only the 12Gb IT and IR hardware including the SAS 3004, SAS 3008 and SAS 3108. Some notes about this driver: o The 12Gb hardware can do "FastPath" I/O, and that capability is included in this driver. o WarpDrive functionality has been removed, since it isn't supported in the 12Gb driver interface. o The Scatter/Gather list handling code is significantly different between the 6Gb and 12Gb hardware. The 12Gb boards support IEEE Scatter/Gather lists. Thanks to LSI for developing and testing this driver for FreeBSD. share/man/man4/mpr.4: mpr(4) man page. sys/dev/mpr/*: mpr(4) driver files. sys/modules/Makefile, sys/modules/mpr/Makefile: Add a module Makefile for the mpr(4) driver. sys/conf/files: Add the mpr(4) driver. sys/amd64/conf/GENERIC, sys/i386/conf/GENERIC, sys/mips/conf/OCTEON1, sys/sparc64/conf/GENERIC: Add the mpr(4) driver to all config files that currently have the mps(4) driver. sys/ia64/conf/GENERIC: Add the mps(4) and mpr(4) drivers to the ia64 GENERIC config file. sys/i386/conf/XEN: Exclude the mpr module from building here. Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> Tested by: Chris Reeves <chrisr@spectralogic.com> Sponsored by: LSI, Spectra Logic Relnotes: LSI 12Gb SAS driver mpr(4) added ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265237 | ken | 2014-05-02 14:36:20 -0600 (Fri, 02 May 2014) | 8 lines Add the mpr(4) man page to the man4 Makefile. This should have been included in r265236. Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> MFC after: 3 days Sponsored by: LSI, Spectra Logic ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265241 | brueffer | 2014-05-02 15:14:28 -0600 (Fri, 02 May 2014) | 2 lines Use our standard SYNOPSIS wording; perform some cleanup while here. ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265261 | brueffer | 2014-05-03 05:15:28 -0600 (Sat, 03 May 2014) | 2 lines Add a missing colon. ------------------------------------------------------------------------ Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> Tested by: Chris Reeves <chrisr@spectralogic.com> Sponsored by: LSI, Spectra Logic Relnotes: LSI 12Gb SAS driver mpr(4) added diff 265388 Mon May 05 20:43:36 MDT 2014 ken MFC the mpr(4) driver for LSI's 12Gb SAS cards. This includes r265236, r265237, r265241 and r265261: ------------------------------------------------------------------------ r265236 | ken | 2014-05-02 14:25:09 -0600 (Fri, 02 May 2014) | 51 lines Bring in the mpr(4) driver for LSI's MPT3 12Gb SAS controllers. This is derived from the mps(4) driver, but it supports only the 12Gb IT and IR hardware including the SAS 3004, SAS 3008 and SAS 3108. Some notes about this driver: o The 12Gb hardware can do "FastPath" I/O, and that capability is included in this driver. o WarpDrive functionality has been removed, since it isn't supported in the 12Gb driver interface. o The Scatter/Gather list handling code is significantly different between the 6Gb and 12Gb hardware. The 12Gb boards support IEEE Scatter/Gather lists. Thanks to LSI for developing and testing this driver for FreeBSD. share/man/man4/mpr.4: mpr(4) man page. sys/dev/mpr/*: mpr(4) driver files. sys/modules/Makefile, sys/modules/mpr/Makefile: Add a module Makefile for the mpr(4) driver. sys/conf/files: Add the mpr(4) driver. sys/amd64/conf/GENERIC, sys/i386/conf/GENERIC, sys/mips/conf/OCTEON1, sys/sparc64/conf/GENERIC: Add the mpr(4) driver to all config files that currently have the mps(4) driver. sys/ia64/conf/GENERIC: Add the mps(4) and mpr(4) drivers to the ia64 GENERIC config file. sys/i386/conf/XEN: Exclude the mpr module from building here. Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> Tested by: Chris Reeves <chrisr@spectralogic.com> Sponsored by: LSI, Spectra Logic Relnotes: LSI 12Gb SAS driver mpr(4) added ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265237 | ken | 2014-05-02 14:36:20 -0600 (Fri, 02 May 2014) | 8 lines Add the mpr(4) man page to the man4 Makefile. This should have been included in r265236. Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> MFC after: 3 days Sponsored by: LSI, Spectra Logic ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265241 | brueffer | 2014-05-02 15:14:28 -0600 (Fri, 02 May 2014) | 2 lines Use our standard SYNOPSIS wording; perform some cleanup while here. ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265261 | brueffer | 2014-05-03 05:15:28 -0600 (Sat, 03 May 2014) | 2 lines Add a missing colon. ------------------------------------------------------------------------ Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> Tested by: Chris Reeves <chrisr@spectralogic.com> Sponsored by: LSI, Spectra Logic Relnotes: LSI 12Gb SAS driver mpr(4) added diff 265388 Mon May 05 20:43:36 MDT 2014 ken MFC the mpr(4) driver for LSI's 12Gb SAS cards. This includes r265236, r265237, r265241 and r265261: ------------------------------------------------------------------------ r265236 | ken | 2014-05-02 14:25:09 -0600 (Fri, 02 May 2014) | 51 lines Bring in the mpr(4) driver for LSI's MPT3 12Gb SAS controllers. This is derived from the mps(4) driver, but it supports only the 12Gb IT and IR hardware including the SAS 3004, SAS 3008 and SAS 3108. Some notes about this driver: o The 12Gb hardware can do "FastPath" I/O, and that capability is included in this driver. o WarpDrive functionality has been removed, since it isn't supported in the 12Gb driver interface. o The Scatter/Gather list handling code is significantly different between the 6Gb and 12Gb hardware. The 12Gb boards support IEEE Scatter/Gather lists. Thanks to LSI for developing and testing this driver for FreeBSD. share/man/man4/mpr.4: mpr(4) man page. sys/dev/mpr/*: mpr(4) driver files. sys/modules/Makefile, sys/modules/mpr/Makefile: Add a module Makefile for the mpr(4) driver. sys/conf/files: Add the mpr(4) driver. sys/amd64/conf/GENERIC, sys/i386/conf/GENERIC, sys/mips/conf/OCTEON1, sys/sparc64/conf/GENERIC: Add the mpr(4) driver to all config files that currently have the mps(4) driver. sys/ia64/conf/GENERIC: Add the mps(4) and mpr(4) drivers to the ia64 GENERIC config file. sys/i386/conf/XEN: Exclude the mpr module from building here. Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> Tested by: Chris Reeves <chrisr@spectralogic.com> Sponsored by: LSI, Spectra Logic Relnotes: LSI 12Gb SAS driver mpr(4) added ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265237 | ken | 2014-05-02 14:36:20 -0600 (Fri, 02 May 2014) | 8 lines Add the mpr(4) man page to the man4 Makefile. This should have been included in r265236. Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> MFC after: 3 days Sponsored by: LSI, Spectra Logic ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265241 | brueffer | 2014-05-02 15:14:28 -0600 (Fri, 02 May 2014) | 2 lines Use our standard SYNOPSIS wording; perform some cleanup while here. ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265261 | brueffer | 2014-05-03 05:15:28 -0600 (Sat, 03 May 2014) | 2 lines Add a missing colon. ------------------------------------------------------------------------ Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> Tested by: Chris Reeves <chrisr@spectralogic.com> Sponsored by: LSI, Spectra Logic Relnotes: LSI 12Gb SAS driver mpr(4) added diff 265388 Mon May 05 20:43:36 MDT 2014 ken MFC the mpr(4) driver for LSI's 12Gb SAS cards. This includes r265236, r265237, r265241 and r265261: ------------------------------------------------------------------------ r265236 | ken | 2014-05-02 14:25:09 -0600 (Fri, 02 May 2014) | 51 lines Bring in the mpr(4) driver for LSI's MPT3 12Gb SAS controllers. This is derived from the mps(4) driver, but it supports only the 12Gb IT and IR hardware including the SAS 3004, SAS 3008 and SAS 3108. Some notes about this driver: o The 12Gb hardware can do "FastPath" I/O, and that capability is included in this driver. o WarpDrive functionality has been removed, since it isn't supported in the 12Gb driver interface. o The Scatter/Gather list handling code is significantly different between the 6Gb and 12Gb hardware. The 12Gb boards support IEEE Scatter/Gather lists. Thanks to LSI for developing and testing this driver for FreeBSD. share/man/man4/mpr.4: mpr(4) man page. sys/dev/mpr/*: mpr(4) driver files. sys/modules/Makefile, sys/modules/mpr/Makefile: Add a module Makefile for the mpr(4) driver. sys/conf/files: Add the mpr(4) driver. sys/amd64/conf/GENERIC, sys/i386/conf/GENERIC, sys/mips/conf/OCTEON1, sys/sparc64/conf/GENERIC: Add the mpr(4) driver to all config files that currently have the mps(4) driver. sys/ia64/conf/GENERIC: Add the mps(4) and mpr(4) drivers to the ia64 GENERIC config file. sys/i386/conf/XEN: Exclude the mpr module from building here. Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> Tested by: Chris Reeves <chrisr@spectralogic.com> Sponsored by: LSI, Spectra Logic Relnotes: LSI 12Gb SAS driver mpr(4) added ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265237 | ken | 2014-05-02 14:36:20 -0600 (Fri, 02 May 2014) | 8 lines Add the mpr(4) man page to the man4 Makefile. This should have been included in r265236. Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> MFC after: 3 days Sponsored by: LSI, Spectra Logic ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265241 | brueffer | 2014-05-02 15:14:28 -0600 (Fri, 02 May 2014) | 2 lines Use our standard SYNOPSIS wording; perform some cleanup while here. ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265261 | brueffer | 2014-05-03 05:15:28 -0600 (Sat, 03 May 2014) | 2 lines Add a missing colon. ------------------------------------------------------------------------ Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> Tested by: Chris Reeves <chrisr@spectralogic.com> Sponsored by: LSI, Spectra Logic Relnotes: LSI 12Gb SAS driver mpr(4) added diff 265388 Mon May 05 20:43:36 MDT 2014 ken MFC the mpr(4) driver for LSI's 12Gb SAS cards. This includes r265236, r265237, r265241 and r265261: ------------------------------------------------------------------------ r265236 | ken | 2014-05-02 14:25:09 -0600 (Fri, 02 May 2014) | 51 lines Bring in the mpr(4) driver for LSI's MPT3 12Gb SAS controllers. This is derived from the mps(4) driver, but it supports only the 12Gb IT and IR hardware including the SAS 3004, SAS 3008 and SAS 3108. Some notes about this driver: o The 12Gb hardware can do "FastPath" I/O, and that capability is included in this driver. o WarpDrive functionality has been removed, since it isn't supported in the 12Gb driver interface. o The Scatter/Gather list handling code is significantly different between the 6Gb and 12Gb hardware. The 12Gb boards support IEEE Scatter/Gather lists. Thanks to LSI for developing and testing this driver for FreeBSD. share/man/man4/mpr.4: mpr(4) man page. sys/dev/mpr/*: mpr(4) driver files. sys/modules/Makefile, sys/modules/mpr/Makefile: Add a module Makefile for the mpr(4) driver. sys/conf/files: Add the mpr(4) driver. sys/amd64/conf/GENERIC, sys/i386/conf/GENERIC, sys/mips/conf/OCTEON1, sys/sparc64/conf/GENERIC: Add the mpr(4) driver to all config files that currently have the mps(4) driver. sys/ia64/conf/GENERIC: Add the mps(4) and mpr(4) drivers to the ia64 GENERIC config file. sys/i386/conf/XEN: Exclude the mpr module from building here. Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> Tested by: Chris Reeves <chrisr@spectralogic.com> Sponsored by: LSI, Spectra Logic Relnotes: LSI 12Gb SAS driver mpr(4) added ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265237 | ken | 2014-05-02 14:36:20 -0600 (Fri, 02 May 2014) | 8 lines Add the mpr(4) man page to the man4 Makefile. This should have been included in r265236. Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> MFC after: 3 days Sponsored by: LSI, Spectra Logic ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265241 | brueffer | 2014-05-02 15:14:28 -0600 (Fri, 02 May 2014) | 2 lines Use our standard SYNOPSIS wording; perform some cleanup while here. ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265261 | brueffer | 2014-05-03 05:15:28 -0600 (Sat, 03 May 2014) | 2 lines Add a missing colon. ------------------------------------------------------------------------ Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> Tested by: Chris Reeves <chrisr@spectralogic.com> Sponsored by: LSI, Spectra Logic Relnotes: LSI 12Gb SAS driver mpr(4) added |
| H A D | mpi2_targ.h | diff 265388 Mon May 05 20:43:36 MDT 2014 ken MFC the mpr(4) driver for LSI's 12Gb SAS cards. This includes r265236, r265237, r265241 and r265261: ------------------------------------------------------------------------ r265236 | ken | 2014-05-02 14:25:09 -0600 (Fri, 02 May 2014) | 51 lines Bring in the mpr(4) driver for LSI's MPT3 12Gb SAS controllers. This is derived from the mps(4) driver, but it supports only the 12Gb IT and IR hardware including the SAS 3004, SAS 3008 and SAS 3108. Some notes about this driver: o The 12Gb hardware can do "FastPath" I/O, and that capability is included in this driver. o WarpDrive functionality has been removed, since it isn't supported in the 12Gb driver interface. o The Scatter/Gather list handling code is significantly different between the 6Gb and 12Gb hardware. The 12Gb boards support IEEE Scatter/Gather lists. Thanks to LSI for developing and testing this driver for FreeBSD. share/man/man4/mpr.4: mpr(4) man page. sys/dev/mpr/*: mpr(4) driver files. sys/modules/Makefile, sys/modules/mpr/Makefile: Add a module Makefile for the mpr(4) driver. sys/conf/files: Add the mpr(4) driver. sys/amd64/conf/GENERIC, sys/i386/conf/GENERIC, sys/mips/conf/OCTEON1, sys/sparc64/conf/GENERIC: Add the mpr(4) driver to all config files that currently have the mps(4) driver. sys/ia64/conf/GENERIC: Add the mps(4) and mpr(4) drivers to the ia64 GENERIC config file. sys/i386/conf/XEN: Exclude the mpr module from building here. Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> Tested by: Chris Reeves <chrisr@spectralogic.com> Sponsored by: LSI, Spectra Logic Relnotes: LSI 12Gb SAS driver mpr(4) added ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265237 | ken | 2014-05-02 14:36:20 -0600 (Fri, 02 May 2014) | 8 lines Add the mpr(4) man page to the man4 Makefile. This should have been included in r265236. Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> MFC after: 3 days Sponsored by: LSI, Spectra Logic ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265241 | brueffer | 2014-05-02 15:14:28 -0600 (Fri, 02 May 2014) | 2 lines Use our standard SYNOPSIS wording; perform some cleanup while here. ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265261 | brueffer | 2014-05-03 05:15:28 -0600 (Sat, 03 May 2014) | 2 lines Add a missing colon. ------------------------------------------------------------------------ Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> Tested by: Chris Reeves <chrisr@spectralogic.com> Sponsored by: LSI, Spectra Logic Relnotes: LSI 12Gb SAS driver mpr(4) added diff 265388 Mon May 05 20:43:36 MDT 2014 ken MFC the mpr(4) driver for LSI's 12Gb SAS cards. This includes r265236, r265237, r265241 and r265261: ------------------------------------------------------------------------ r265236 | ken | 2014-05-02 14:25:09 -0600 (Fri, 02 May 2014) | 51 lines Bring in the mpr(4) driver for LSI's MPT3 12Gb SAS controllers. This is derived from the mps(4) driver, but it supports only the 12Gb IT and IR hardware including the SAS 3004, SAS 3008 and SAS 3108. Some notes about this driver: o The 12Gb hardware can do "FastPath" I/O, and that capability is included in this driver. o WarpDrive functionality has been removed, since it isn't supported in the 12Gb driver interface. o The Scatter/Gather list handling code is significantly different between the 6Gb and 12Gb hardware. The 12Gb boards support IEEE Scatter/Gather lists. Thanks to LSI for developing and testing this driver for FreeBSD. share/man/man4/mpr.4: mpr(4) man page. sys/dev/mpr/*: mpr(4) driver files. sys/modules/Makefile, sys/modules/mpr/Makefile: Add a module Makefile for the mpr(4) driver. sys/conf/files: Add the mpr(4) driver. sys/amd64/conf/GENERIC, sys/i386/conf/GENERIC, sys/mips/conf/OCTEON1, sys/sparc64/conf/GENERIC: Add the mpr(4) driver to all config files that currently have the mps(4) driver. sys/ia64/conf/GENERIC: Add the mps(4) and mpr(4) drivers to the ia64 GENERIC config file. sys/i386/conf/XEN: Exclude the mpr module from building here. Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> Tested by: Chris Reeves <chrisr@spectralogic.com> Sponsored by: LSI, Spectra Logic Relnotes: LSI 12Gb SAS driver mpr(4) added ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265237 | ken | 2014-05-02 14:36:20 -0600 (Fri, 02 May 2014) | 8 lines Add the mpr(4) man page to the man4 Makefile. This should have been included in r265236. Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> MFC after: 3 days Sponsored by: LSI, Spectra Logic ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265241 | brueffer | 2014-05-02 15:14:28 -0600 (Fri, 02 May 2014) | 2 lines Use our standard SYNOPSIS wording; perform some cleanup while here. ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265261 | brueffer | 2014-05-03 05:15:28 -0600 (Sat, 03 May 2014) | 2 lines Add a missing colon. ------------------------------------------------------------------------ Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> Tested by: Chris Reeves <chrisr@spectralogic.com> Sponsored by: LSI, Spectra Logic Relnotes: LSI 12Gb SAS driver mpr(4) added diff 265388 Mon May 05 20:43:36 MDT 2014 ken MFC the mpr(4) driver for LSI's 12Gb SAS cards. This includes r265236, r265237, r265241 and r265261: ------------------------------------------------------------------------ r265236 | ken | 2014-05-02 14:25:09 -0600 (Fri, 02 May 2014) | 51 lines Bring in the mpr(4) driver for LSI's MPT3 12Gb SAS controllers. This is derived from the mps(4) driver, but it supports only the 12Gb IT and IR hardware including the SAS 3004, SAS 3008 and SAS 3108. Some notes about this driver: o The 12Gb hardware can do "FastPath" I/O, and that capability is included in this driver. o WarpDrive functionality has been removed, since it isn't supported in the 12Gb driver interface. o The Scatter/Gather list handling code is significantly different between the 6Gb and 12Gb hardware. The 12Gb boards support IEEE Scatter/Gather lists. Thanks to LSI for developing and testing this driver for FreeBSD. share/man/man4/mpr.4: mpr(4) man page. sys/dev/mpr/*: mpr(4) driver files. sys/modules/Makefile, sys/modules/mpr/Makefile: Add a module Makefile for the mpr(4) driver. sys/conf/files: Add the mpr(4) driver. sys/amd64/conf/GENERIC, sys/i386/conf/GENERIC, sys/mips/conf/OCTEON1, sys/sparc64/conf/GENERIC: Add the mpr(4) driver to all config files that currently have the mps(4) driver. sys/ia64/conf/GENERIC: Add the mps(4) and mpr(4) drivers to the ia64 GENERIC config file. sys/i386/conf/XEN: Exclude the mpr module from building here. Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> Tested by: Chris Reeves <chrisr@spectralogic.com> Sponsored by: LSI, Spectra Logic Relnotes: LSI 12Gb SAS driver mpr(4) added ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265237 | ken | 2014-05-02 14:36:20 -0600 (Fri, 02 May 2014) | 8 lines Add the mpr(4) man page to the man4 Makefile. This should have been included in r265236. Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> MFC after: 3 days Sponsored by: LSI, Spectra Logic ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265241 | brueffer | 2014-05-02 15:14:28 -0600 (Fri, 02 May 2014) | 2 lines Use our standard SYNOPSIS wording; perform some cleanup while here. ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265261 | brueffer | 2014-05-03 05:15:28 -0600 (Sat, 03 May 2014) | 2 lines Add a missing colon. ------------------------------------------------------------------------ Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> Tested by: Chris Reeves <chrisr@spectralogic.com> Sponsored by: LSI, Spectra Logic Relnotes: LSI 12Gb SAS driver mpr(4) added diff 265388 Mon May 05 20:43:36 MDT 2014 ken MFC the mpr(4) driver for LSI's 12Gb SAS cards. This includes r265236, r265237, r265241 and r265261: ------------------------------------------------------------------------ r265236 | ken | 2014-05-02 14:25:09 -0600 (Fri, 02 May 2014) | 51 lines Bring in the mpr(4) driver for LSI's MPT3 12Gb SAS controllers. This is derived from the mps(4) driver, but it supports only the 12Gb IT and IR hardware including the SAS 3004, SAS 3008 and SAS 3108. Some notes about this driver: o The 12Gb hardware can do "FastPath" I/O, and that capability is included in this driver. o WarpDrive functionality has been removed, since it isn't supported in the 12Gb driver interface. o The Scatter/Gather list handling code is significantly different between the 6Gb and 12Gb hardware. The 12Gb boards support IEEE Scatter/Gather lists. Thanks to LSI for developing and testing this driver for FreeBSD. share/man/man4/mpr.4: mpr(4) man page. sys/dev/mpr/*: mpr(4) driver files. sys/modules/Makefile, sys/modules/mpr/Makefile: Add a module Makefile for the mpr(4) driver. sys/conf/files: Add the mpr(4) driver. sys/amd64/conf/GENERIC, sys/i386/conf/GENERIC, sys/mips/conf/OCTEON1, sys/sparc64/conf/GENERIC: Add the mpr(4) driver to all config files that currently have the mps(4) driver. sys/ia64/conf/GENERIC: Add the mps(4) and mpr(4) drivers to the ia64 GENERIC config file. sys/i386/conf/XEN: Exclude the mpr module from building here. Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> Tested by: Chris Reeves <chrisr@spectralogic.com> Sponsored by: LSI, Spectra Logic Relnotes: LSI 12Gb SAS driver mpr(4) added ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265237 | ken | 2014-05-02 14:36:20 -0600 (Fri, 02 May 2014) | 8 lines Add the mpr(4) man page to the man4 Makefile. This should have been included in r265236. Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> MFC after: 3 days Sponsored by: LSI, Spectra Logic ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265241 | brueffer | 2014-05-02 15:14:28 -0600 (Fri, 02 May 2014) | 2 lines Use our standard SYNOPSIS wording; perform some cleanup while here. ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265261 | brueffer | 2014-05-03 05:15:28 -0600 (Sat, 03 May 2014) | 2 lines Add a missing colon. ------------------------------------------------------------------------ Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> Tested by: Chris Reeves <chrisr@spectralogic.com> Sponsored by: LSI, Spectra Logic Relnotes: LSI 12Gb SAS driver mpr(4) added diff 265388 Mon May 05 20:43:36 MDT 2014 ken MFC the mpr(4) driver for LSI's 12Gb SAS cards. This includes r265236, r265237, r265241 and r265261: ------------------------------------------------------------------------ r265236 | ken | 2014-05-02 14:25:09 -0600 (Fri, 02 May 2014) | 51 lines Bring in the mpr(4) driver for LSI's MPT3 12Gb SAS controllers. This is derived from the mps(4) driver, but it supports only the 12Gb IT and IR hardware including the SAS 3004, SAS 3008 and SAS 3108. Some notes about this driver: o The 12Gb hardware can do "FastPath" I/O, and that capability is included in this driver. o WarpDrive functionality has been removed, since it isn't supported in the 12Gb driver interface. o The Scatter/Gather list handling code is significantly different between the 6Gb and 12Gb hardware. The 12Gb boards support IEEE Scatter/Gather lists. Thanks to LSI for developing and testing this driver for FreeBSD. share/man/man4/mpr.4: mpr(4) man page. sys/dev/mpr/*: mpr(4) driver files. sys/modules/Makefile, sys/modules/mpr/Makefile: Add a module Makefile for the mpr(4) driver. sys/conf/files: Add the mpr(4) driver. sys/amd64/conf/GENERIC, sys/i386/conf/GENERIC, sys/mips/conf/OCTEON1, sys/sparc64/conf/GENERIC: Add the mpr(4) driver to all config files that currently have the mps(4) driver. sys/ia64/conf/GENERIC: Add the mps(4) and mpr(4) drivers to the ia64 GENERIC config file. sys/i386/conf/XEN: Exclude the mpr module from building here. Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> Tested by: Chris Reeves <chrisr@spectralogic.com> Sponsored by: LSI, Spectra Logic Relnotes: LSI 12Gb SAS driver mpr(4) added ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265237 | ken | 2014-05-02 14:36:20 -0600 (Fri, 02 May 2014) | 8 lines Add the mpr(4) man page to the man4 Makefile. This should have been included in r265236. Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> MFC after: 3 days Sponsored by: LSI, Spectra Logic ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265241 | brueffer | 2014-05-02 15:14:28 -0600 (Fri, 02 May 2014) | 2 lines Use our standard SYNOPSIS wording; perform some cleanup while here. ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265261 | brueffer | 2014-05-03 05:15:28 -0600 (Sat, 03 May 2014) | 2 lines Add a missing colon. ------------------------------------------------------------------------ Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> Tested by: Chris Reeves <chrisr@spectralogic.com> Sponsored by: LSI, Spectra Logic Relnotes: LSI 12Gb SAS driver mpr(4) added diff 265388 Mon May 05 20:43:36 MDT 2014 ken MFC the mpr(4) driver for LSI's 12Gb SAS cards. This includes r265236, r265237, r265241 and r265261: ------------------------------------------------------------------------ r265236 | ken | 2014-05-02 14:25:09 -0600 (Fri, 02 May 2014) | 51 lines Bring in the mpr(4) driver for LSI's MPT3 12Gb SAS controllers. This is derived from the mps(4) driver, but it supports only the 12Gb IT and IR hardware including the SAS 3004, SAS 3008 and SAS 3108. Some notes about this driver: o The 12Gb hardware can do "FastPath" I/O, and that capability is included in this driver. o WarpDrive functionality has been removed, since it isn't supported in the 12Gb driver interface. o The Scatter/Gather list handling code is significantly different between the 6Gb and 12Gb hardware. The 12Gb boards support IEEE Scatter/Gather lists. Thanks to LSI for developing and testing this driver for FreeBSD. share/man/man4/mpr.4: mpr(4) man page. sys/dev/mpr/*: mpr(4) driver files. sys/modules/Makefile, sys/modules/mpr/Makefile: Add a module Makefile for the mpr(4) driver. sys/conf/files: Add the mpr(4) driver. sys/amd64/conf/GENERIC, sys/i386/conf/GENERIC, sys/mips/conf/OCTEON1, sys/sparc64/conf/GENERIC: Add the mpr(4) driver to all config files that currently have the mps(4) driver. sys/ia64/conf/GENERIC: Add the mps(4) and mpr(4) drivers to the ia64 GENERIC config file. sys/i386/conf/XEN: Exclude the mpr module from building here. Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> Tested by: Chris Reeves <chrisr@spectralogic.com> Sponsored by: LSI, Spectra Logic Relnotes: LSI 12Gb SAS driver mpr(4) added ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265237 | ken | 2014-05-02 14:36:20 -0600 (Fri, 02 May 2014) | 8 lines Add the mpr(4) man page to the man4 Makefile. This should have been included in r265236. Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> MFC after: 3 days Sponsored by: LSI, Spectra Logic ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265241 | brueffer | 2014-05-02 15:14:28 -0600 (Fri, 02 May 2014) | 2 lines Use our standard SYNOPSIS wording; perform some cleanup while here. ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265261 | brueffer | 2014-05-03 05:15:28 -0600 (Sat, 03 May 2014) | 2 lines Add a missing colon. ------------------------------------------------------------------------ Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> Tested by: Chris Reeves <chrisr@spectralogic.com> Sponsored by: LSI, Spectra Logic Relnotes: LSI 12Gb SAS driver mpr(4) added diff 265388 Mon May 05 20:43:36 MDT 2014 ken MFC the mpr(4) driver for LSI's 12Gb SAS cards. This includes r265236, r265237, r265241 and r265261: ------------------------------------------------------------------------ r265236 | ken | 2014-05-02 14:25:09 -0600 (Fri, 02 May 2014) | 51 lines Bring in the mpr(4) driver for LSI's MPT3 12Gb SAS controllers. This is derived from the mps(4) driver, but it supports only the 12Gb IT and IR hardware including the SAS 3004, SAS 3008 and SAS 3108. Some notes about this driver: o The 12Gb hardware can do "FastPath" I/O, and that capability is included in this driver. o WarpDrive functionality has been removed, since it isn't supported in the 12Gb driver interface. o The Scatter/Gather list handling code is significantly different between the 6Gb and 12Gb hardware. The 12Gb boards support IEEE Scatter/Gather lists. Thanks to LSI for developing and testing this driver for FreeBSD. share/man/man4/mpr.4: mpr(4) man page. sys/dev/mpr/*: mpr(4) driver files. sys/modules/Makefile, sys/modules/mpr/Makefile: Add a module Makefile for the mpr(4) driver. sys/conf/files: Add the mpr(4) driver. sys/amd64/conf/GENERIC, sys/i386/conf/GENERIC, sys/mips/conf/OCTEON1, sys/sparc64/conf/GENERIC: Add the mpr(4) driver to all config files that currently have the mps(4) driver. sys/ia64/conf/GENERIC: Add the mps(4) and mpr(4) drivers to the ia64 GENERIC config file. sys/i386/conf/XEN: Exclude the mpr module from building here. Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> Tested by: Chris Reeves <chrisr@spectralogic.com> Sponsored by: LSI, Spectra Logic Relnotes: LSI 12Gb SAS driver mpr(4) added ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265237 | ken | 2014-05-02 14:36:20 -0600 (Fri, 02 May 2014) | 8 lines Add the mpr(4) man page to the man4 Makefile. This should have been included in r265236. Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> MFC after: 3 days Sponsored by: LSI, Spectra Logic ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265241 | brueffer | 2014-05-02 15:14:28 -0600 (Fri, 02 May 2014) | 2 lines Use our standard SYNOPSIS wording; perform some cleanup while here. ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265261 | brueffer | 2014-05-03 05:15:28 -0600 (Sat, 03 May 2014) | 2 lines Add a missing colon. ------------------------------------------------------------------------ Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> Tested by: Chris Reeves <chrisr@spectralogic.com> Sponsored by: LSI, Spectra Logic Relnotes: LSI 12Gb SAS driver mpr(4) added diff 265388 Mon May 05 20:43:36 MDT 2014 ken MFC the mpr(4) driver for LSI's 12Gb SAS cards. This includes r265236, r265237, r265241 and r265261: ------------------------------------------------------------------------ r265236 | ken | 2014-05-02 14:25:09 -0600 (Fri, 02 May 2014) | 51 lines Bring in the mpr(4) driver for LSI's MPT3 12Gb SAS controllers. This is derived from the mps(4) driver, but it supports only the 12Gb IT and IR hardware including the SAS 3004, SAS 3008 and SAS 3108. Some notes about this driver: o The 12Gb hardware can do "FastPath" I/O, and that capability is included in this driver. o WarpDrive functionality has been removed, since it isn't supported in the 12Gb driver interface. o The Scatter/Gather list handling code is significantly different between the 6Gb and 12Gb hardware. The 12Gb boards support IEEE Scatter/Gather lists. Thanks to LSI for developing and testing this driver for FreeBSD. share/man/man4/mpr.4: mpr(4) man page. sys/dev/mpr/*: mpr(4) driver files. sys/modules/Makefile, sys/modules/mpr/Makefile: Add a module Makefile for the mpr(4) driver. sys/conf/files: Add the mpr(4) driver. sys/amd64/conf/GENERIC, sys/i386/conf/GENERIC, sys/mips/conf/OCTEON1, sys/sparc64/conf/GENERIC: Add the mpr(4) driver to all config files that currently have the mps(4) driver. sys/ia64/conf/GENERIC: Add the mps(4) and mpr(4) drivers to the ia64 GENERIC config file. sys/i386/conf/XEN: Exclude the mpr module from building here. Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> Tested by: Chris Reeves <chrisr@spectralogic.com> Sponsored by: LSI, Spectra Logic Relnotes: LSI 12Gb SAS driver mpr(4) added ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265237 | ken | 2014-05-02 14:36:20 -0600 (Fri, 02 May 2014) | 8 lines Add the mpr(4) man page to the man4 Makefile. This should have been included in r265236. Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> MFC after: 3 days Sponsored by: LSI, Spectra Logic ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265241 | brueffer | 2014-05-02 15:14:28 -0600 (Fri, 02 May 2014) | 2 lines Use our standard SYNOPSIS wording; perform some cleanup while here. ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265261 | brueffer | 2014-05-03 05:15:28 -0600 (Sat, 03 May 2014) | 2 lines Add a missing colon. ------------------------------------------------------------------------ Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> Tested by: Chris Reeves <chrisr@spectralogic.com> Sponsored by: LSI, Spectra Logic Relnotes: LSI 12Gb SAS driver mpr(4) added diff 265388 Mon May 05 20:43:36 MDT 2014 ken MFC the mpr(4) driver for LSI's 12Gb SAS cards. This includes r265236, r265237, r265241 and r265261: ------------------------------------------------------------------------ r265236 | ken | 2014-05-02 14:25:09 -0600 (Fri, 02 May 2014) | 51 lines Bring in the mpr(4) driver for LSI's MPT3 12Gb SAS controllers. This is derived from the mps(4) driver, but it supports only the 12Gb IT and IR hardware including the SAS 3004, SAS 3008 and SAS 3108. Some notes about this driver: o The 12Gb hardware can do "FastPath" I/O, and that capability is included in this driver. o WarpDrive functionality has been removed, since it isn't supported in the 12Gb driver interface. o The Scatter/Gather list handling code is significantly different between the 6Gb and 12Gb hardware. The 12Gb boards support IEEE Scatter/Gather lists. Thanks to LSI for developing and testing this driver for FreeBSD. share/man/man4/mpr.4: mpr(4) man page. sys/dev/mpr/*: mpr(4) driver files. sys/modules/Makefile, sys/modules/mpr/Makefile: Add a module Makefile for the mpr(4) driver. sys/conf/files: Add the mpr(4) driver. sys/amd64/conf/GENERIC, sys/i386/conf/GENERIC, sys/mips/conf/OCTEON1, sys/sparc64/conf/GENERIC: Add the mpr(4) driver to all config files that currently have the mps(4) driver. sys/ia64/conf/GENERIC: Add the mps(4) and mpr(4) drivers to the ia64 GENERIC config file. sys/i386/conf/XEN: Exclude the mpr module from building here. Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> Tested by: Chris Reeves <chrisr@spectralogic.com> Sponsored by: LSI, Spectra Logic Relnotes: LSI 12Gb SAS driver mpr(4) added ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265237 | ken | 2014-05-02 14:36:20 -0600 (Fri, 02 May 2014) | 8 lines Add the mpr(4) man page to the man4 Makefile. This should have been included in r265236. Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> MFC after: 3 days Sponsored by: LSI, Spectra Logic ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265241 | brueffer | 2014-05-02 15:14:28 -0600 (Fri, 02 May 2014) | 2 lines Use our standard SYNOPSIS wording; perform some cleanup while here. ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265261 | brueffer | 2014-05-03 05:15:28 -0600 (Sat, 03 May 2014) | 2 lines Add a missing colon. ------------------------------------------------------------------------ Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> Tested by: Chris Reeves <chrisr@spectralogic.com> Sponsored by: LSI, Spectra Logic Relnotes: LSI 12Gb SAS driver mpr(4) added diff 265388 Mon May 05 20:43:36 MDT 2014 ken MFC the mpr(4) driver for LSI's 12Gb SAS cards. This includes r265236, r265237, r265241 and r265261: ------------------------------------------------------------------------ r265236 | ken | 2014-05-02 14:25:09 -0600 (Fri, 02 May 2014) | 51 lines Bring in the mpr(4) driver for LSI's MPT3 12Gb SAS controllers. This is derived from the mps(4) driver, but it supports only the 12Gb IT and IR hardware including the SAS 3004, SAS 3008 and SAS 3108. Some notes about this driver: o The 12Gb hardware can do "FastPath" I/O, and that capability is included in this driver. o WarpDrive functionality has been removed, since it isn't supported in the 12Gb driver interface. o The Scatter/Gather list handling code is significantly different between the 6Gb and 12Gb hardware. The 12Gb boards support IEEE Scatter/Gather lists. Thanks to LSI for developing and testing this driver for FreeBSD. share/man/man4/mpr.4: mpr(4) man page. sys/dev/mpr/*: mpr(4) driver files. sys/modules/Makefile, sys/modules/mpr/Makefile: Add a module Makefile for the mpr(4) driver. sys/conf/files: Add the mpr(4) driver. sys/amd64/conf/GENERIC, sys/i386/conf/GENERIC, sys/mips/conf/OCTEON1, sys/sparc64/conf/GENERIC: Add the mpr(4) driver to all config files that currently have the mps(4) driver. sys/ia64/conf/GENERIC: Add the mps(4) and mpr(4) drivers to the ia64 GENERIC config file. sys/i386/conf/XEN: Exclude the mpr module from building here. Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> Tested by: Chris Reeves <chrisr@spectralogic.com> Sponsored by: LSI, Spectra Logic Relnotes: LSI 12Gb SAS driver mpr(4) added ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265237 | ken | 2014-05-02 14:36:20 -0600 (Fri, 02 May 2014) | 8 lines Add the mpr(4) man page to the man4 Makefile. This should have been included in r265236. Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> MFC after: 3 days Sponsored by: LSI, Spectra Logic ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265241 | brueffer | 2014-05-02 15:14:28 -0600 (Fri, 02 May 2014) | 2 lines Use our standard SYNOPSIS wording; perform some cleanup while here. ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265261 | brueffer | 2014-05-03 05:15:28 -0600 (Sat, 03 May 2014) | 2 lines Add a missing colon. ------------------------------------------------------------------------ Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> Tested by: Chris Reeves <chrisr@spectralogic.com> Sponsored by: LSI, Spectra Logic Relnotes: LSI 12Gb SAS driver mpr(4) added diff 265388 Mon May 05 20:43:36 MDT 2014 ken MFC the mpr(4) driver for LSI's 12Gb SAS cards. This includes r265236, r265237, r265241 and r265261: ------------------------------------------------------------------------ r265236 | ken | 2014-05-02 14:25:09 -0600 (Fri, 02 May 2014) | 51 lines Bring in the mpr(4) driver for LSI's MPT3 12Gb SAS controllers. This is derived from the mps(4) driver, but it supports only the 12Gb IT and IR hardware including the SAS 3004, SAS 3008 and SAS 3108. Some notes about this driver: o The 12Gb hardware can do "FastPath" I/O, and that capability is included in this driver. o WarpDrive functionality has been removed, since it isn't supported in the 12Gb driver interface. o The Scatter/Gather list handling code is significantly different between the 6Gb and 12Gb hardware. The 12Gb boards support IEEE Scatter/Gather lists. Thanks to LSI for developing and testing this driver for FreeBSD. share/man/man4/mpr.4: mpr(4) man page. sys/dev/mpr/*: mpr(4) driver files. sys/modules/Makefile, sys/modules/mpr/Makefile: Add a module Makefile for the mpr(4) driver. sys/conf/files: Add the mpr(4) driver. sys/amd64/conf/GENERIC, sys/i386/conf/GENERIC, sys/mips/conf/OCTEON1, sys/sparc64/conf/GENERIC: Add the mpr(4) driver to all config files that currently have the mps(4) driver. sys/ia64/conf/GENERIC: Add the mps(4) and mpr(4) drivers to the ia64 GENERIC config file. sys/i386/conf/XEN: Exclude the mpr module from building here. Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> Tested by: Chris Reeves <chrisr@spectralogic.com> Sponsored by: LSI, Spectra Logic Relnotes: LSI 12Gb SAS driver mpr(4) added ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265237 | ken | 2014-05-02 14:36:20 -0600 (Fri, 02 May 2014) | 8 lines Add the mpr(4) man page to the man4 Makefile. This should have been included in r265236. Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> MFC after: 3 days Sponsored by: LSI, Spectra Logic ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265241 | brueffer | 2014-05-02 15:14:28 -0600 (Fri, 02 May 2014) | 2 lines Use our standard SYNOPSIS wording; perform some cleanup while here. ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265261 | brueffer | 2014-05-03 05:15:28 -0600 (Sat, 03 May 2014) | 2 lines Add a missing colon. ------------------------------------------------------------------------ Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> Tested by: Chris Reeves <chrisr@spectralogic.com> Sponsored by: LSI, Spectra Logic Relnotes: LSI 12Gb SAS driver mpr(4) added diff 265388 Mon May 05 20:43:36 MDT 2014 ken MFC the mpr(4) driver for LSI's 12Gb SAS cards. This includes r265236, r265237, r265241 and r265261: ------------------------------------------------------------------------ r265236 | ken | 2014-05-02 14:25:09 -0600 (Fri, 02 May 2014) | 51 lines Bring in the mpr(4) driver for LSI's MPT3 12Gb SAS controllers. This is derived from the mps(4) driver, but it supports only the 12Gb IT and IR hardware including the SAS 3004, SAS 3008 and SAS 3108. Some notes about this driver: o The 12Gb hardware can do "FastPath" I/O, and that capability is included in this driver. o WarpDrive functionality has been removed, since it isn't supported in the 12Gb driver interface. o The Scatter/Gather list handling code is significantly different between the 6Gb and 12Gb hardware. The 12Gb boards support IEEE Scatter/Gather lists. Thanks to LSI for developing and testing this driver for FreeBSD. share/man/man4/mpr.4: mpr(4) man page. sys/dev/mpr/*: mpr(4) driver files. sys/modules/Makefile, sys/modules/mpr/Makefile: Add a module Makefile for the mpr(4) driver. sys/conf/files: Add the mpr(4) driver. sys/amd64/conf/GENERIC, sys/i386/conf/GENERIC, sys/mips/conf/OCTEON1, sys/sparc64/conf/GENERIC: Add the mpr(4) driver to all config files that currently have the mps(4) driver. sys/ia64/conf/GENERIC: Add the mps(4) and mpr(4) drivers to the ia64 GENERIC config file. sys/i386/conf/XEN: Exclude the mpr module from building here. Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> Tested by: Chris Reeves <chrisr@spectralogic.com> Sponsored by: LSI, Spectra Logic Relnotes: LSI 12Gb SAS driver mpr(4) added ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265237 | ken | 2014-05-02 14:36:20 -0600 (Fri, 02 May 2014) | 8 lines Add the mpr(4) man page to the man4 Makefile. This should have been included in r265236. Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> MFC after: 3 days Sponsored by: LSI, Spectra Logic ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265241 | brueffer | 2014-05-02 15:14:28 -0600 (Fri, 02 May 2014) | 2 lines Use our standard SYNOPSIS wording; perform some cleanup while here. ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265261 | brueffer | 2014-05-03 05:15:28 -0600 (Sat, 03 May 2014) | 2 lines Add a missing colon. ------------------------------------------------------------------------ Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> Tested by: Chris Reeves <chrisr@spectralogic.com> Sponsored by: LSI, Spectra Logic Relnotes: LSI 12Gb SAS driver mpr(4) added diff 265388 Mon May 05 20:43:36 MDT 2014 ken MFC the mpr(4) driver for LSI's 12Gb SAS cards. This includes r265236, r265237, r265241 and r265261: ------------------------------------------------------------------------ r265236 | ken | 2014-05-02 14:25:09 -0600 (Fri, 02 May 2014) | 51 lines Bring in the mpr(4) driver for LSI's MPT3 12Gb SAS controllers. This is derived from the mps(4) driver, but it supports only the 12Gb IT and IR hardware including the SAS 3004, SAS 3008 and SAS 3108. Some notes about this driver: o The 12Gb hardware can do "FastPath" I/O, and that capability is included in this driver. o WarpDrive functionality has been removed, since it isn't supported in the 12Gb driver interface. o The Scatter/Gather list handling code is significantly different between the 6Gb and 12Gb hardware. The 12Gb boards support IEEE Scatter/Gather lists. Thanks to LSI for developing and testing this driver for FreeBSD. share/man/man4/mpr.4: mpr(4) man page. sys/dev/mpr/*: mpr(4) driver files. sys/modules/Makefile, sys/modules/mpr/Makefile: Add a module Makefile for the mpr(4) driver. sys/conf/files: Add the mpr(4) driver. sys/amd64/conf/GENERIC, sys/i386/conf/GENERIC, sys/mips/conf/OCTEON1, sys/sparc64/conf/GENERIC: Add the mpr(4) driver to all config files that currently have the mps(4) driver. sys/ia64/conf/GENERIC: Add the mps(4) and mpr(4) drivers to the ia64 GENERIC config file. sys/i386/conf/XEN: Exclude the mpr module from building here. Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> Tested by: Chris Reeves <chrisr@spectralogic.com> Sponsored by: LSI, Spectra Logic Relnotes: LSI 12Gb SAS driver mpr(4) added ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265237 | ken | 2014-05-02 14:36:20 -0600 (Fri, 02 May 2014) | 8 lines Add the mpr(4) man page to the man4 Makefile. This should have been included in r265236. Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> MFC after: 3 days Sponsored by: LSI, Spectra Logic ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265241 | brueffer | 2014-05-02 15:14:28 -0600 (Fri, 02 May 2014) | 2 lines Use our standard SYNOPSIS wording; perform some cleanup while here. ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265261 | brueffer | 2014-05-03 05:15:28 -0600 (Sat, 03 May 2014) | 2 lines Add a missing colon. ------------------------------------------------------------------------ Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> Tested by: Chris Reeves <chrisr@spectralogic.com> Sponsored by: LSI, Spectra Logic Relnotes: LSI 12Gb SAS driver mpr(4) added diff 265388 Mon May 05 20:43:36 MDT 2014 ken MFC the mpr(4) driver for LSI's 12Gb SAS cards. This includes r265236, r265237, r265241 and r265261: ------------------------------------------------------------------------ r265236 | ken | 2014-05-02 14:25:09 -0600 (Fri, 02 May 2014) | 51 lines Bring in the mpr(4) driver for LSI's MPT3 12Gb SAS controllers. This is derived from the mps(4) driver, but it supports only the 12Gb IT and IR hardware including the SAS 3004, SAS 3008 and SAS 3108. Some notes about this driver: o The 12Gb hardware can do "FastPath" I/O, and that capability is included in this driver. o WarpDrive functionality has been removed, since it isn't supported in the 12Gb driver interface. o The Scatter/Gather list handling code is significantly different between the 6Gb and 12Gb hardware. The 12Gb boards support IEEE Scatter/Gather lists. Thanks to LSI for developing and testing this driver for FreeBSD. share/man/man4/mpr.4: mpr(4) man page. sys/dev/mpr/*: mpr(4) driver files. sys/modules/Makefile, sys/modules/mpr/Makefile: Add a module Makefile for the mpr(4) driver. sys/conf/files: Add the mpr(4) driver. sys/amd64/conf/GENERIC, sys/i386/conf/GENERIC, sys/mips/conf/OCTEON1, sys/sparc64/conf/GENERIC: Add the mpr(4) driver to all config files that currently have the mps(4) driver. sys/ia64/conf/GENERIC: Add the mps(4) and mpr(4) drivers to the ia64 GENERIC config file. sys/i386/conf/XEN: Exclude the mpr module from building here. Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> Tested by: Chris Reeves <chrisr@spectralogic.com> Sponsored by: LSI, Spectra Logic Relnotes: LSI 12Gb SAS driver mpr(4) added ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265237 | ken | 2014-05-02 14:36:20 -0600 (Fri, 02 May 2014) | 8 lines Add the mpr(4) man page to the man4 Makefile. This should have been included in r265236. Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> MFC after: 3 days Sponsored by: LSI, Spectra Logic ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265241 | brueffer | 2014-05-02 15:14:28 -0600 (Fri, 02 May 2014) | 2 lines Use our standard SYNOPSIS wording; perform some cleanup while here. ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265261 | brueffer | 2014-05-03 05:15:28 -0600 (Sat, 03 May 2014) | 2 lines Add a missing colon. ------------------------------------------------------------------------ Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> Tested by: Chris Reeves <chrisr@spectralogic.com> Sponsored by: LSI, Spectra Logic Relnotes: LSI 12Gb SAS driver mpr(4) added diff 265388 Mon May 05 20:43:36 MDT 2014 ken MFC the mpr(4) driver for LSI's 12Gb SAS cards. This includes r265236, r265237, r265241 and r265261: ------------------------------------------------------------------------ r265236 | ken | 2014-05-02 14:25:09 -0600 (Fri, 02 May 2014) | 51 lines Bring in the mpr(4) driver for LSI's MPT3 12Gb SAS controllers. This is derived from the mps(4) driver, but it supports only the 12Gb IT and IR hardware including the SAS 3004, SAS 3008 and SAS 3108. Some notes about this driver: o The 12Gb hardware can do "FastPath" I/O, and that capability is included in this driver. o WarpDrive functionality has been removed, since it isn't supported in the 12Gb driver interface. o The Scatter/Gather list handling code is significantly different between the 6Gb and 12Gb hardware. The 12Gb boards support IEEE Scatter/Gather lists. Thanks to LSI for developing and testing this driver for FreeBSD. share/man/man4/mpr.4: mpr(4) man page. sys/dev/mpr/*: mpr(4) driver files. sys/modules/Makefile, sys/modules/mpr/Makefile: Add a module Makefile for the mpr(4) driver. sys/conf/files: Add the mpr(4) driver. sys/amd64/conf/GENERIC, sys/i386/conf/GENERIC, sys/mips/conf/OCTEON1, sys/sparc64/conf/GENERIC: Add the mpr(4) driver to all config files that currently have the mps(4) driver. sys/ia64/conf/GENERIC: Add the mps(4) and mpr(4) drivers to the ia64 GENERIC config file. sys/i386/conf/XEN: Exclude the mpr module from building here. Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> Tested by: Chris Reeves <chrisr@spectralogic.com> Sponsored by: LSI, Spectra Logic Relnotes: LSI 12Gb SAS driver mpr(4) added ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265237 | ken | 2014-05-02 14:36:20 -0600 (Fri, 02 May 2014) | 8 lines Add the mpr(4) man page to the man4 Makefile. This should have been included in r265236. Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> MFC after: 3 days Sponsored by: LSI, Spectra Logic ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265241 | brueffer | 2014-05-02 15:14:28 -0600 (Fri, 02 May 2014) | 2 lines Use our standard SYNOPSIS wording; perform some cleanup while here. ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265261 | brueffer | 2014-05-03 05:15:28 -0600 (Sat, 03 May 2014) | 2 lines Add a missing colon. ------------------------------------------------------------------------ Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> Tested by: Chris Reeves <chrisr@spectralogic.com> Sponsored by: LSI, Spectra Logic Relnotes: LSI 12Gb SAS driver mpr(4) added |
| H A D | mpi2_tool.h | diff 265388 Mon May 05 20:43:36 MDT 2014 ken MFC the mpr(4) driver for LSI's 12Gb SAS cards. This includes r265236, r265237, r265241 and r265261: ------------------------------------------------------------------------ r265236 | ken | 2014-05-02 14:25:09 -0600 (Fri, 02 May 2014) | 51 lines Bring in the mpr(4) driver for LSI's MPT3 12Gb SAS controllers. This is derived from the mps(4) driver, but it supports only the 12Gb IT and IR hardware including the SAS 3004, SAS 3008 and SAS 3108. Some notes about this driver: o The 12Gb hardware can do "FastPath" I/O, and that capability is included in this driver. o WarpDrive functionality has been removed, since it isn't supported in the 12Gb driver interface. o The Scatter/Gather list handling code is significantly different between the 6Gb and 12Gb hardware. The 12Gb boards support IEEE Scatter/Gather lists. Thanks to LSI for developing and testing this driver for FreeBSD. share/man/man4/mpr.4: mpr(4) man page. sys/dev/mpr/*: mpr(4) driver files. sys/modules/Makefile, sys/modules/mpr/Makefile: Add a module Makefile for the mpr(4) driver. sys/conf/files: Add the mpr(4) driver. sys/amd64/conf/GENERIC, sys/i386/conf/GENERIC, sys/mips/conf/OCTEON1, sys/sparc64/conf/GENERIC: Add the mpr(4) driver to all config files that currently have the mps(4) driver. sys/ia64/conf/GENERIC: Add the mps(4) and mpr(4) drivers to the ia64 GENERIC config file. sys/i386/conf/XEN: Exclude the mpr module from building here. Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> Tested by: Chris Reeves <chrisr@spectralogic.com> Sponsored by: LSI, Spectra Logic Relnotes: LSI 12Gb SAS driver mpr(4) added ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265237 | ken | 2014-05-02 14:36:20 -0600 (Fri, 02 May 2014) | 8 lines Add the mpr(4) man page to the man4 Makefile. This should have been included in r265236. Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> MFC after: 3 days Sponsored by: LSI, Spectra Logic ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265241 | brueffer | 2014-05-02 15:14:28 -0600 (Fri, 02 May 2014) | 2 lines Use our standard SYNOPSIS wording; perform some cleanup while here. ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265261 | brueffer | 2014-05-03 05:15:28 -0600 (Sat, 03 May 2014) | 2 lines Add a missing colon. ------------------------------------------------------------------------ Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> Tested by: Chris Reeves <chrisr@spectralogic.com> Sponsored by: LSI, Spectra Logic Relnotes: LSI 12Gb SAS driver mpr(4) added diff 265388 Mon May 05 20:43:36 MDT 2014 ken MFC the mpr(4) driver for LSI's 12Gb SAS cards. This includes r265236, r265237, r265241 and r265261: ------------------------------------------------------------------------ r265236 | ken | 2014-05-02 14:25:09 -0600 (Fri, 02 May 2014) | 51 lines Bring in the mpr(4) driver for LSI's MPT3 12Gb SAS controllers. This is derived from the mps(4) driver, but it supports only the 12Gb IT and IR hardware including the SAS 3004, SAS 3008 and SAS 3108. Some notes about this driver: o The 12Gb hardware can do "FastPath" I/O, and that capability is included in this driver. o WarpDrive functionality has been removed, since it isn't supported in the 12Gb driver interface. o The Scatter/Gather list handling code is significantly different between the 6Gb and 12Gb hardware. The 12Gb boards support IEEE Scatter/Gather lists. Thanks to LSI for developing and testing this driver for FreeBSD. share/man/man4/mpr.4: mpr(4) man page. sys/dev/mpr/*: mpr(4) driver files. sys/modules/Makefile, sys/modules/mpr/Makefile: Add a module Makefile for the mpr(4) driver. sys/conf/files: Add the mpr(4) driver. sys/amd64/conf/GENERIC, sys/i386/conf/GENERIC, sys/mips/conf/OCTEON1, sys/sparc64/conf/GENERIC: Add the mpr(4) driver to all config files that currently have the mps(4) driver. sys/ia64/conf/GENERIC: Add the mps(4) and mpr(4) drivers to the ia64 GENERIC config file. sys/i386/conf/XEN: Exclude the mpr module from building here. Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> Tested by: Chris Reeves <chrisr@spectralogic.com> Sponsored by: LSI, Spectra Logic Relnotes: LSI 12Gb SAS driver mpr(4) added ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265237 | ken | 2014-05-02 14:36:20 -0600 (Fri, 02 May 2014) | 8 lines Add the mpr(4) man page to the man4 Makefile. This should have been included in r265236. Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> MFC after: 3 days Sponsored by: LSI, Spectra Logic ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265241 | brueffer | 2014-05-02 15:14:28 -0600 (Fri, 02 May 2014) | 2 lines Use our standard SYNOPSIS wording; perform some cleanup while here. ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265261 | brueffer | 2014-05-03 05:15:28 -0600 (Sat, 03 May 2014) | 2 lines Add a missing colon. ------------------------------------------------------------------------ Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> Tested by: Chris Reeves <chrisr@spectralogic.com> Sponsored by: LSI, Spectra Logic Relnotes: LSI 12Gb SAS driver mpr(4) added diff 265388 Mon May 05 20:43:36 MDT 2014 ken MFC the mpr(4) driver for LSI's 12Gb SAS cards. This includes r265236, r265237, r265241 and r265261: ------------------------------------------------------------------------ r265236 | ken | 2014-05-02 14:25:09 -0600 (Fri, 02 May 2014) | 51 lines Bring in the mpr(4) driver for LSI's MPT3 12Gb SAS controllers. This is derived from the mps(4) driver, but it supports only the 12Gb IT and IR hardware including the SAS 3004, SAS 3008 and SAS 3108. Some notes about this driver: o The 12Gb hardware can do "FastPath" I/O, and that capability is included in this driver. o WarpDrive functionality has been removed, since it isn't supported in the 12Gb driver interface. o The Scatter/Gather list handling code is significantly different between the 6Gb and 12Gb hardware. The 12Gb boards support IEEE Scatter/Gather lists. Thanks to LSI for developing and testing this driver for FreeBSD. share/man/man4/mpr.4: mpr(4) man page. sys/dev/mpr/*: mpr(4) driver files. sys/modules/Makefile, sys/modules/mpr/Makefile: Add a module Makefile for the mpr(4) driver. sys/conf/files: Add the mpr(4) driver. sys/amd64/conf/GENERIC, sys/i386/conf/GENERIC, sys/mips/conf/OCTEON1, sys/sparc64/conf/GENERIC: Add the mpr(4) driver to all config files that currently have the mps(4) driver. sys/ia64/conf/GENERIC: Add the mps(4) and mpr(4) drivers to the ia64 GENERIC config file. sys/i386/conf/XEN: Exclude the mpr module from building here. Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> Tested by: Chris Reeves <chrisr@spectralogic.com> Sponsored by: LSI, Spectra Logic Relnotes: LSI 12Gb SAS driver mpr(4) added ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265237 | ken | 2014-05-02 14:36:20 -0600 (Fri, 02 May 2014) | 8 lines Add the mpr(4) man page to the man4 Makefile. This should have been included in r265236. Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> MFC after: 3 days Sponsored by: LSI, Spectra Logic ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265241 | brueffer | 2014-05-02 15:14:28 -0600 (Fri, 02 May 2014) | 2 lines Use our standard SYNOPSIS wording; perform some cleanup while here. ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265261 | brueffer | 2014-05-03 05:15:28 -0600 (Sat, 03 May 2014) | 2 lines Add a missing colon. ------------------------------------------------------------------------ Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> Tested by: Chris Reeves <chrisr@spectralogic.com> Sponsored by: LSI, Spectra Logic Relnotes: LSI 12Gb SAS driver mpr(4) added diff 265388 Mon May 05 20:43:36 MDT 2014 ken MFC the mpr(4) driver for LSI's 12Gb SAS cards. This includes r265236, r265237, r265241 and r265261: ------------------------------------------------------------------------ r265236 | ken | 2014-05-02 14:25:09 -0600 (Fri, 02 May 2014) | 51 lines Bring in the mpr(4) driver for LSI's MPT3 12Gb SAS controllers. This is derived from the mps(4) driver, but it supports only the 12Gb IT and IR hardware including the SAS 3004, SAS 3008 and SAS 3108. Some notes about this driver: o The 12Gb hardware can do "FastPath" I/O, and that capability is included in this driver. o WarpDrive functionality has been removed, since it isn't supported in the 12Gb driver interface. o The Scatter/Gather list handling code is significantly different between the 6Gb and 12Gb hardware. The 12Gb boards support IEEE Scatter/Gather lists. Thanks to LSI for developing and testing this driver for FreeBSD. share/man/man4/mpr.4: mpr(4) man page. sys/dev/mpr/*: mpr(4) driver files. sys/modules/Makefile, sys/modules/mpr/Makefile: Add a module Makefile for the mpr(4) driver. sys/conf/files: Add the mpr(4) driver. sys/amd64/conf/GENERIC, sys/i386/conf/GENERIC, sys/mips/conf/OCTEON1, sys/sparc64/conf/GENERIC: Add the mpr(4) driver to all config files that currently have the mps(4) driver. sys/ia64/conf/GENERIC: Add the mps(4) and mpr(4) drivers to the ia64 GENERIC config file. sys/i386/conf/XEN: Exclude the mpr module from building here. Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> Tested by: Chris Reeves <chrisr@spectralogic.com> Sponsored by: LSI, Spectra Logic Relnotes: LSI 12Gb SAS driver mpr(4) added ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265237 | ken | 2014-05-02 14:36:20 -0600 (Fri, 02 May 2014) | 8 lines Add the mpr(4) man page to the man4 Makefile. This should have been included in r265236. Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> MFC after: 3 days Sponsored by: LSI, Spectra Logic ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265241 | brueffer | 2014-05-02 15:14:28 -0600 (Fri, 02 May 2014) | 2 lines Use our standard SYNOPSIS wording; perform some cleanup while here. ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265261 | brueffer | 2014-05-03 05:15:28 -0600 (Sat, 03 May 2014) | 2 lines Add a missing colon. ------------------------------------------------------------------------ Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> Tested by: Chris Reeves <chrisr@spectralogic.com> Sponsored by: LSI, Spectra Logic Relnotes: LSI 12Gb SAS driver mpr(4) added diff 265388 Mon May 05 20:43:36 MDT 2014 ken MFC the mpr(4) driver for LSI's 12Gb SAS cards. This includes r265236, r265237, r265241 and r265261: ------------------------------------------------------------------------ r265236 | ken | 2014-05-02 14:25:09 -0600 (Fri, 02 May 2014) | 51 lines Bring in the mpr(4) driver for LSI's MPT3 12Gb SAS controllers. This is derived from the mps(4) driver, but it supports only the 12Gb IT and IR hardware including the SAS 3004, SAS 3008 and SAS 3108. Some notes about this driver: o The 12Gb hardware can do "FastPath" I/O, and that capability is included in this driver. o WarpDrive functionality has been removed, since it isn't supported in the 12Gb driver interface. o The Scatter/Gather list handling code is significantly different between the 6Gb and 12Gb hardware. The 12Gb boards support IEEE Scatter/Gather lists. Thanks to LSI for developing and testing this driver for FreeBSD. share/man/man4/mpr.4: mpr(4) man page. sys/dev/mpr/*: mpr(4) driver files. sys/modules/Makefile, sys/modules/mpr/Makefile: Add a module Makefile for the mpr(4) driver. sys/conf/files: Add the mpr(4) driver. sys/amd64/conf/GENERIC, sys/i386/conf/GENERIC, sys/mips/conf/OCTEON1, sys/sparc64/conf/GENERIC: Add the mpr(4) driver to all config files that currently have the mps(4) driver. sys/ia64/conf/GENERIC: Add the mps(4) and mpr(4) drivers to the ia64 GENERIC config file. sys/i386/conf/XEN: Exclude the mpr module from building here. Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> Tested by: Chris Reeves <chrisr@spectralogic.com> Sponsored by: LSI, Spectra Logic Relnotes: LSI 12Gb SAS driver mpr(4) added ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265237 | ken | 2014-05-02 14:36:20 -0600 (Fri, 02 May 2014) | 8 lines Add the mpr(4) man page to the man4 Makefile. This should have been included in r265236. Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> MFC after: 3 days Sponsored by: LSI, Spectra Logic ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265241 | brueffer | 2014-05-02 15:14:28 -0600 (Fri, 02 May 2014) | 2 lines Use our standard SYNOPSIS wording; perform some cleanup while here. ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265261 | brueffer | 2014-05-03 05:15:28 -0600 (Sat, 03 May 2014) | 2 lines Add a missing colon. ------------------------------------------------------------------------ Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> Tested by: Chris Reeves <chrisr@spectralogic.com> Sponsored by: LSI, Spectra Logic Relnotes: LSI 12Gb SAS driver mpr(4) added diff 265388 Mon May 05 20:43:36 MDT 2014 ken MFC the mpr(4) driver for LSI's 12Gb SAS cards. This includes r265236, r265237, r265241 and r265261: ------------------------------------------------------------------------ r265236 | ken | 2014-05-02 14:25:09 -0600 (Fri, 02 May 2014) | 51 lines Bring in the mpr(4) driver for LSI's MPT3 12Gb SAS controllers. This is derived from the mps(4) driver, but it supports only the 12Gb IT and IR hardware including the SAS 3004, SAS 3008 and SAS 3108. Some notes about this driver: o The 12Gb hardware can do "FastPath" I/O, and that capability is included in this driver. o WarpDrive functionality has been removed, since it isn't supported in the 12Gb driver interface. o The Scatter/Gather list handling code is significantly different between the 6Gb and 12Gb hardware. The 12Gb boards support IEEE Scatter/Gather lists. Thanks to LSI for developing and testing this driver for FreeBSD. share/man/man4/mpr.4: mpr(4) man page. sys/dev/mpr/*: mpr(4) driver files. sys/modules/Makefile, sys/modules/mpr/Makefile: Add a module Makefile for the mpr(4) driver. sys/conf/files: Add the mpr(4) driver. sys/amd64/conf/GENERIC, sys/i386/conf/GENERIC, sys/mips/conf/OCTEON1, sys/sparc64/conf/GENERIC: Add the mpr(4) driver to all config files that currently have the mps(4) driver. sys/ia64/conf/GENERIC: Add the mps(4) and mpr(4) drivers to the ia64 GENERIC config file. sys/i386/conf/XEN: Exclude the mpr module from building here. Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> Tested by: Chris Reeves <chrisr@spectralogic.com> Sponsored by: LSI, Spectra Logic Relnotes: LSI 12Gb SAS driver mpr(4) added ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265237 | ken | 2014-05-02 14:36:20 -0600 (Fri, 02 May 2014) | 8 lines Add the mpr(4) man page to the man4 Makefile. This should have been included in r265236. Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> MFC after: 3 days Sponsored by: LSI, Spectra Logic ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265241 | brueffer | 2014-05-02 15:14:28 -0600 (Fri, 02 May 2014) | 2 lines Use our standard SYNOPSIS wording; perform some cleanup while here. ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265261 | brueffer | 2014-05-03 05:15:28 -0600 (Sat, 03 May 2014) | 2 lines Add a missing colon. ------------------------------------------------------------------------ Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> Tested by: Chris Reeves <chrisr@spectralogic.com> Sponsored by: LSI, Spectra Logic Relnotes: LSI 12Gb SAS driver mpr(4) added diff 265388 Mon May 05 20:43:36 MDT 2014 ken MFC the mpr(4) driver for LSI's 12Gb SAS cards. This includes r265236, r265237, r265241 and r265261: ------------------------------------------------------------------------ r265236 | ken | 2014-05-02 14:25:09 -0600 (Fri, 02 May 2014) | 51 lines Bring in the mpr(4) driver for LSI's MPT3 12Gb SAS controllers. This is derived from the mps(4) driver, but it supports only the 12Gb IT and IR hardware including the SAS 3004, SAS 3008 and SAS 3108. Some notes about this driver: o The 12Gb hardware can do "FastPath" I/O, and that capability is included in this driver. o WarpDrive functionality has been removed, since it isn't supported in the 12Gb driver interface. o The Scatter/Gather list handling code is significantly different between the 6Gb and 12Gb hardware. The 12Gb boards support IEEE Scatter/Gather lists. Thanks to LSI for developing and testing this driver for FreeBSD. share/man/man4/mpr.4: mpr(4) man page. sys/dev/mpr/*: mpr(4) driver files. sys/modules/Makefile, sys/modules/mpr/Makefile: Add a module Makefile for the mpr(4) driver. sys/conf/files: Add the mpr(4) driver. sys/amd64/conf/GENERIC, sys/i386/conf/GENERIC, sys/mips/conf/OCTEON1, sys/sparc64/conf/GENERIC: Add the mpr(4) driver to all config files that currently have the mps(4) driver. sys/ia64/conf/GENERIC: Add the mps(4) and mpr(4) drivers to the ia64 GENERIC config file. sys/i386/conf/XEN: Exclude the mpr module from building here. Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> Tested by: Chris Reeves <chrisr@spectralogic.com> Sponsored by: LSI, Spectra Logic Relnotes: LSI 12Gb SAS driver mpr(4) added ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265237 | ken | 2014-05-02 14:36:20 -0600 (Fri, 02 May 2014) | 8 lines Add the mpr(4) man page to the man4 Makefile. This should have been included in r265236. Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> MFC after: 3 days Sponsored by: LSI, Spectra Logic ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265241 | brueffer | 2014-05-02 15:14:28 -0600 (Fri, 02 May 2014) | 2 lines Use our standard SYNOPSIS wording; perform some cleanup while here. ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265261 | brueffer | 2014-05-03 05:15:28 -0600 (Sat, 03 May 2014) | 2 lines Add a missing colon. ------------------------------------------------------------------------ Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> Tested by: Chris Reeves <chrisr@spectralogic.com> Sponsored by: LSI, Spectra Logic Relnotes: LSI 12Gb SAS driver mpr(4) added diff 265388 Mon May 05 20:43:36 MDT 2014 ken MFC the mpr(4) driver for LSI's 12Gb SAS cards. This includes r265236, r265237, r265241 and r265261: ------------------------------------------------------------------------ r265236 | ken | 2014-05-02 14:25:09 -0600 (Fri, 02 May 2014) | 51 lines Bring in the mpr(4) driver for LSI's MPT3 12Gb SAS controllers. This is derived from the mps(4) driver, but it supports only the 12Gb IT and IR hardware including the SAS 3004, SAS 3008 and SAS 3108. Some notes about this driver: o The 12Gb hardware can do "FastPath" I/O, and that capability is included in this driver. o WarpDrive functionality has been removed, since it isn't supported in the 12Gb driver interface. o The Scatter/Gather list handling code is significantly different between the 6Gb and 12Gb hardware. The 12Gb boards support IEEE Scatter/Gather lists. Thanks to LSI for developing and testing this driver for FreeBSD. share/man/man4/mpr.4: mpr(4) man page. sys/dev/mpr/*: mpr(4) driver files. sys/modules/Makefile, sys/modules/mpr/Makefile: Add a module Makefile for the mpr(4) driver. sys/conf/files: Add the mpr(4) driver. sys/amd64/conf/GENERIC, sys/i386/conf/GENERIC, sys/mips/conf/OCTEON1, sys/sparc64/conf/GENERIC: Add the mpr(4) driver to all config files that currently have the mps(4) driver. sys/ia64/conf/GENERIC: Add the mps(4) and mpr(4) drivers to the ia64 GENERIC config file. sys/i386/conf/XEN: Exclude the mpr module from building here. Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> Tested by: Chris Reeves <chrisr@spectralogic.com> Sponsored by: LSI, Spectra Logic Relnotes: LSI 12Gb SAS driver mpr(4) added ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265237 | ken | 2014-05-02 14:36:20 -0600 (Fri, 02 May 2014) | 8 lines Add the mpr(4) man page to the man4 Makefile. This should have been included in r265236. Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> MFC after: 3 days Sponsored by: LSI, Spectra Logic ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265241 | brueffer | 2014-05-02 15:14:28 -0600 (Fri, 02 May 2014) | 2 lines Use our standard SYNOPSIS wording; perform some cleanup while here. ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265261 | brueffer | 2014-05-03 05:15:28 -0600 (Sat, 03 May 2014) | 2 lines Add a missing colon. ------------------------------------------------------------------------ Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> Tested by: Chris Reeves <chrisr@spectralogic.com> Sponsored by: LSI, Spectra Logic Relnotes: LSI 12Gb SAS driver mpr(4) added diff 265388 Mon May 05 20:43:36 MDT 2014 ken MFC the mpr(4) driver for LSI's 12Gb SAS cards. This includes r265236, r265237, r265241 and r265261: ------------------------------------------------------------------------ r265236 | ken | 2014-05-02 14:25:09 -0600 (Fri, 02 May 2014) | 51 lines Bring in the mpr(4) driver for LSI's MPT3 12Gb SAS controllers. This is derived from the mps(4) driver, but it supports only the 12Gb IT and IR hardware including the SAS 3004, SAS 3008 and SAS 3108. Some notes about this driver: o The 12Gb hardware can do "FastPath" I/O, and that capability is included in this driver. o WarpDrive functionality has been removed, since it isn't supported in the 12Gb driver interface. o The Scatter/Gather list handling code is significantly different between the 6Gb and 12Gb hardware. The 12Gb boards support IEEE Scatter/Gather lists. Thanks to LSI for developing and testing this driver for FreeBSD. share/man/man4/mpr.4: mpr(4) man page. sys/dev/mpr/*: mpr(4) driver files. sys/modules/Makefile, sys/modules/mpr/Makefile: Add a module Makefile for the mpr(4) driver. sys/conf/files: Add the mpr(4) driver. sys/amd64/conf/GENERIC, sys/i386/conf/GENERIC, sys/mips/conf/OCTEON1, sys/sparc64/conf/GENERIC: Add the mpr(4) driver to all config files that currently have the mps(4) driver. sys/ia64/conf/GENERIC: Add the mps(4) and mpr(4) drivers to the ia64 GENERIC config file. sys/i386/conf/XEN: Exclude the mpr module from building here. Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> Tested by: Chris Reeves <chrisr@spectralogic.com> Sponsored by: LSI, Spectra Logic Relnotes: LSI 12Gb SAS driver mpr(4) added ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265237 | ken | 2014-05-02 14:36:20 -0600 (Fri, 02 May 2014) | 8 lines Add the mpr(4) man page to the man4 Makefile. This should have been included in r265236. Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> MFC after: 3 days Sponsored by: LSI, Spectra Logic ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265241 | brueffer | 2014-05-02 15:14:28 -0600 (Fri, 02 May 2014) | 2 lines Use our standard SYNOPSIS wording; perform some cleanup while here. ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265261 | brueffer | 2014-05-03 05:15:28 -0600 (Sat, 03 May 2014) | 2 lines Add a missing colon. ------------------------------------------------------------------------ Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> Tested by: Chris Reeves <chrisr@spectralogic.com> Sponsored by: LSI, Spectra Logic Relnotes: LSI 12Gb SAS driver mpr(4) added diff 265388 Mon May 05 20:43:36 MDT 2014 ken MFC the mpr(4) driver for LSI's 12Gb SAS cards. This includes r265236, r265237, r265241 and r265261: ------------------------------------------------------------------------ r265236 | ken | 2014-05-02 14:25:09 -0600 (Fri, 02 May 2014) | 51 lines Bring in the mpr(4) driver for LSI's MPT3 12Gb SAS controllers. This is derived from the mps(4) driver, but it supports only the 12Gb IT and IR hardware including the SAS 3004, SAS 3008 and SAS 3108. Some notes about this driver: o The 12Gb hardware can do "FastPath" I/O, and that capability is included in this driver. o WarpDrive functionality has been removed, since it isn't supported in the 12Gb driver interface. o The Scatter/Gather list handling code is significantly different between the 6Gb and 12Gb hardware. The 12Gb boards support IEEE Scatter/Gather lists. Thanks to LSI for developing and testing this driver for FreeBSD. share/man/man4/mpr.4: mpr(4) man page. sys/dev/mpr/*: mpr(4) driver files. sys/modules/Makefile, sys/modules/mpr/Makefile: Add a module Makefile for the mpr(4) driver. sys/conf/files: Add the mpr(4) driver. sys/amd64/conf/GENERIC, sys/i386/conf/GENERIC, sys/mips/conf/OCTEON1, sys/sparc64/conf/GENERIC: Add the mpr(4) driver to all config files that currently have the mps(4) driver. sys/ia64/conf/GENERIC: Add the mps(4) and mpr(4) drivers to the ia64 GENERIC config file. sys/i386/conf/XEN: Exclude the mpr module from building here. Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> Tested by: Chris Reeves <chrisr@spectralogic.com> Sponsored by: LSI, Spectra Logic Relnotes: LSI 12Gb SAS driver mpr(4) added ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265237 | ken | 2014-05-02 14:36:20 -0600 (Fri, 02 May 2014) | 8 lines Add the mpr(4) man page to the man4 Makefile. This should have been included in r265236. Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> MFC after: 3 days Sponsored by: LSI, Spectra Logic ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265241 | brueffer | 2014-05-02 15:14:28 -0600 (Fri, 02 May 2014) | 2 lines Use our standard SYNOPSIS wording; perform some cleanup while here. ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265261 | brueffer | 2014-05-03 05:15:28 -0600 (Sat, 03 May 2014) | 2 lines Add a missing colon. ------------------------------------------------------------------------ Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> Tested by: Chris Reeves <chrisr@spectralogic.com> Sponsored by: LSI, Spectra Logic Relnotes: LSI 12Gb SAS driver mpr(4) added diff 265388 Mon May 05 20:43:36 MDT 2014 ken MFC the mpr(4) driver for LSI's 12Gb SAS cards. This includes r265236, r265237, r265241 and r265261: ------------------------------------------------------------------------ r265236 | ken | 2014-05-02 14:25:09 -0600 (Fri, 02 May 2014) | 51 lines Bring in the mpr(4) driver for LSI's MPT3 12Gb SAS controllers. This is derived from the mps(4) driver, but it supports only the 12Gb IT and IR hardware including the SAS 3004, SAS 3008 and SAS 3108. Some notes about this driver: o The 12Gb hardware can do "FastPath" I/O, and that capability is included in this driver. o WarpDrive functionality has been removed, since it isn't supported in the 12Gb driver interface. o The Scatter/Gather list handling code is significantly different between the 6Gb and 12Gb hardware. The 12Gb boards support IEEE Scatter/Gather lists. Thanks to LSI for developing and testing this driver for FreeBSD. share/man/man4/mpr.4: mpr(4) man page. sys/dev/mpr/*: mpr(4) driver files. sys/modules/Makefile, sys/modules/mpr/Makefile: Add a module Makefile for the mpr(4) driver. sys/conf/files: Add the mpr(4) driver. sys/amd64/conf/GENERIC, sys/i386/conf/GENERIC, sys/mips/conf/OCTEON1, sys/sparc64/conf/GENERIC: Add the mpr(4) driver to all config files that currently have the mps(4) driver. sys/ia64/conf/GENERIC: Add the mps(4) and mpr(4) drivers to the ia64 GENERIC config file. sys/i386/conf/XEN: Exclude the mpr module from building here. Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> Tested by: Chris Reeves <chrisr@spectralogic.com> Sponsored by: LSI, Spectra Logic Relnotes: LSI 12Gb SAS driver mpr(4) added ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265237 | ken | 2014-05-02 14:36:20 -0600 (Fri, 02 May 2014) | 8 lines Add the mpr(4) man page to the man4 Makefile. This should have been included in r265236. Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> MFC after: 3 days Sponsored by: LSI, Spectra Logic ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265241 | brueffer | 2014-05-02 15:14:28 -0600 (Fri, 02 May 2014) | 2 lines Use our standard SYNOPSIS wording; perform some cleanup while here. ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265261 | brueffer | 2014-05-03 05:15:28 -0600 (Sat, 03 May 2014) | 2 lines Add a missing colon. ------------------------------------------------------------------------ Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> Tested by: Chris Reeves <chrisr@spectralogic.com> Sponsored by: LSI, Spectra Logic Relnotes: LSI 12Gb SAS driver mpr(4) added diff 265388 Mon May 05 20:43:36 MDT 2014 ken MFC the mpr(4) driver for LSI's 12Gb SAS cards. This includes r265236, r265237, r265241 and r265261: ------------------------------------------------------------------------ r265236 | ken | 2014-05-02 14:25:09 -0600 (Fri, 02 May 2014) | 51 lines Bring in the mpr(4) driver for LSI's MPT3 12Gb SAS controllers. This is derived from the mps(4) driver, but it supports only the 12Gb IT and IR hardware including the SAS 3004, SAS 3008 and SAS 3108. Some notes about this driver: o The 12Gb hardware can do "FastPath" I/O, and that capability is included in this driver. o WarpDrive functionality has been removed, since it isn't supported in the 12Gb driver interface. o The Scatter/Gather list handling code is significantly different between the 6Gb and 12Gb hardware. The 12Gb boards support IEEE Scatter/Gather lists. Thanks to LSI for developing and testing this driver for FreeBSD. share/man/man4/mpr.4: mpr(4) man page. sys/dev/mpr/*: mpr(4) driver files. sys/modules/Makefile, sys/modules/mpr/Makefile: Add a module Makefile for the mpr(4) driver. sys/conf/files: Add the mpr(4) driver. sys/amd64/conf/GENERIC, sys/i386/conf/GENERIC, sys/mips/conf/OCTEON1, sys/sparc64/conf/GENERIC: Add the mpr(4) driver to all config files that currently have the mps(4) driver. sys/ia64/conf/GENERIC: Add the mps(4) and mpr(4) drivers to the ia64 GENERIC config file. sys/i386/conf/XEN: Exclude the mpr module from building here. Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> Tested by: Chris Reeves <chrisr@spectralogic.com> Sponsored by: LSI, Spectra Logic Relnotes: LSI 12Gb SAS driver mpr(4) added ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265237 | ken | 2014-05-02 14:36:20 -0600 (Fri, 02 May 2014) | 8 lines Add the mpr(4) man page to the man4 Makefile. This should have been included in r265236. Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> MFC after: 3 days Sponsored by: LSI, Spectra Logic ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265241 | brueffer | 2014-05-02 15:14:28 -0600 (Fri, 02 May 2014) | 2 lines Use our standard SYNOPSIS wording; perform some cleanup while here. ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265261 | brueffer | 2014-05-03 05:15:28 -0600 (Sat, 03 May 2014) | 2 lines Add a missing colon. ------------------------------------------------------------------------ Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> Tested by: Chris Reeves <chrisr@spectralogic.com> Sponsored by: LSI, Spectra Logic Relnotes: LSI 12Gb SAS driver mpr(4) added diff 265388 Mon May 05 20:43:36 MDT 2014 ken MFC the mpr(4) driver for LSI's 12Gb SAS cards. This includes r265236, r265237, r265241 and r265261: ------------------------------------------------------------------------ r265236 | ken | 2014-05-02 14:25:09 -0600 (Fri, 02 May 2014) | 51 lines Bring in the mpr(4) driver for LSI's MPT3 12Gb SAS controllers. This is derived from the mps(4) driver, but it supports only the 12Gb IT and IR hardware including the SAS 3004, SAS 3008 and SAS 3108. Some notes about this driver: o The 12Gb hardware can do "FastPath" I/O, and that capability is included in this driver. o WarpDrive functionality has been removed, since it isn't supported in the 12Gb driver interface. o The Scatter/Gather list handling code is significantly different between the 6Gb and 12Gb hardware. The 12Gb boards support IEEE Scatter/Gather lists. Thanks to LSI for developing and testing this driver for FreeBSD. share/man/man4/mpr.4: mpr(4) man page. sys/dev/mpr/*: mpr(4) driver files. sys/modules/Makefile, sys/modules/mpr/Makefile: Add a module Makefile for the mpr(4) driver. sys/conf/files: Add the mpr(4) driver. sys/amd64/conf/GENERIC, sys/i386/conf/GENERIC, sys/mips/conf/OCTEON1, sys/sparc64/conf/GENERIC: Add the mpr(4) driver to all config files that currently have the mps(4) driver. sys/ia64/conf/GENERIC: Add the mps(4) and mpr(4) drivers to the ia64 GENERIC config file. sys/i386/conf/XEN: Exclude the mpr module from building here. Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> Tested by: Chris Reeves <chrisr@spectralogic.com> Sponsored by: LSI, Spectra Logic Relnotes: LSI 12Gb SAS driver mpr(4) added ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265237 | ken | 2014-05-02 14:36:20 -0600 (Fri, 02 May 2014) | 8 lines Add the mpr(4) man page to the man4 Makefile. This should have been included in r265236. Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> MFC after: 3 days Sponsored by: LSI, Spectra Logic ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265241 | brueffer | 2014-05-02 15:14:28 -0600 (Fri, 02 May 2014) | 2 lines Use our standard SYNOPSIS wording; perform some cleanup while here. ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265261 | brueffer | 2014-05-03 05:15:28 -0600 (Sat, 03 May 2014) | 2 lines Add a missing colon. ------------------------------------------------------------------------ Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> Tested by: Chris Reeves <chrisr@spectralogic.com> Sponsored by: LSI, Spectra Logic Relnotes: LSI 12Gb SAS driver mpr(4) added diff 265388 Mon May 05 20:43:36 MDT 2014 ken MFC the mpr(4) driver for LSI's 12Gb SAS cards. This includes r265236, r265237, r265241 and r265261: ------------------------------------------------------------------------ r265236 | ken | 2014-05-02 14:25:09 -0600 (Fri, 02 May 2014) | 51 lines Bring in the mpr(4) driver for LSI's MPT3 12Gb SAS controllers. This is derived from the mps(4) driver, but it supports only the 12Gb IT and IR hardware including the SAS 3004, SAS 3008 and SAS 3108. Some notes about this driver: o The 12Gb hardware can do "FastPath" I/O, and that capability is included in this driver. o WarpDrive functionality has been removed, since it isn't supported in the 12Gb driver interface. o The Scatter/Gather list handling code is significantly different between the 6Gb and 12Gb hardware. The 12Gb boards support IEEE Scatter/Gather lists. Thanks to LSI for developing and testing this driver for FreeBSD. share/man/man4/mpr.4: mpr(4) man page. sys/dev/mpr/*: mpr(4) driver files. sys/modules/Makefile, sys/modules/mpr/Makefile: Add a module Makefile for the mpr(4) driver. sys/conf/files: Add the mpr(4) driver. sys/amd64/conf/GENERIC, sys/i386/conf/GENERIC, sys/mips/conf/OCTEON1, sys/sparc64/conf/GENERIC: Add the mpr(4) driver to all config files that currently have the mps(4) driver. sys/ia64/conf/GENERIC: Add the mps(4) and mpr(4) drivers to the ia64 GENERIC config file. sys/i386/conf/XEN: Exclude the mpr module from building here. Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> Tested by: Chris Reeves <chrisr@spectralogic.com> Sponsored by: LSI, Spectra Logic Relnotes: LSI 12Gb SAS driver mpr(4) added ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265237 | ken | 2014-05-02 14:36:20 -0600 (Fri, 02 May 2014) | 8 lines Add the mpr(4) man page to the man4 Makefile. This should have been included in r265236. Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> MFC after: 3 days Sponsored by: LSI, Spectra Logic ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265241 | brueffer | 2014-05-02 15:14:28 -0600 (Fri, 02 May 2014) | 2 lines Use our standard SYNOPSIS wording; perform some cleanup while here. ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265261 | brueffer | 2014-05-03 05:15:28 -0600 (Sat, 03 May 2014) | 2 lines Add a missing colon. ------------------------------------------------------------------------ Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> Tested by: Chris Reeves <chrisr@spectralogic.com> Sponsored by: LSI, Spectra Logic Relnotes: LSI 12Gb SAS driver mpr(4) added diff 265388 Mon May 05 20:43:36 MDT 2014 ken MFC the mpr(4) driver for LSI's 12Gb SAS cards. This includes r265236, r265237, r265241 and r265261: ------------------------------------------------------------------------ r265236 | ken | 2014-05-02 14:25:09 -0600 (Fri, 02 May 2014) | 51 lines Bring in the mpr(4) driver for LSI's MPT3 12Gb SAS controllers. This is derived from the mps(4) driver, but it supports only the 12Gb IT and IR hardware including the SAS 3004, SAS 3008 and SAS 3108. Some notes about this driver: o The 12Gb hardware can do "FastPath" I/O, and that capability is included in this driver. o WarpDrive functionality has been removed, since it isn't supported in the 12Gb driver interface. o The Scatter/Gather list handling code is significantly different between the 6Gb and 12Gb hardware. The 12Gb boards support IEEE Scatter/Gather lists. Thanks to LSI for developing and testing this driver for FreeBSD. share/man/man4/mpr.4: mpr(4) man page. sys/dev/mpr/*: mpr(4) driver files. sys/modules/Makefile, sys/modules/mpr/Makefile: Add a module Makefile for the mpr(4) driver. sys/conf/files: Add the mpr(4) driver. sys/amd64/conf/GENERIC, sys/i386/conf/GENERIC, sys/mips/conf/OCTEON1, sys/sparc64/conf/GENERIC: Add the mpr(4) driver to all config files that currently have the mps(4) driver. sys/ia64/conf/GENERIC: Add the mps(4) and mpr(4) drivers to the ia64 GENERIC config file. sys/i386/conf/XEN: Exclude the mpr module from building here. Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> Tested by: Chris Reeves <chrisr@spectralogic.com> Sponsored by: LSI, Spectra Logic Relnotes: LSI 12Gb SAS driver mpr(4) added ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265237 | ken | 2014-05-02 14:36:20 -0600 (Fri, 02 May 2014) | 8 lines Add the mpr(4) man page to the man4 Makefile. This should have been included in r265236. Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> MFC after: 3 days Sponsored by: LSI, Spectra Logic ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265241 | brueffer | 2014-05-02 15:14:28 -0600 (Fri, 02 May 2014) | 2 lines Use our standard SYNOPSIS wording; perform some cleanup while here. ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265261 | brueffer | 2014-05-03 05:15:28 -0600 (Sat, 03 May 2014) | 2 lines Add a missing colon. ------------------------------------------------------------------------ Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> Tested by: Chris Reeves <chrisr@spectralogic.com> Sponsored by: LSI, Spectra Logic Relnotes: LSI 12Gb SAS driver mpr(4) added |
| H A D | mpi2_type.h | diff 265388 Mon May 05 20:43:36 MDT 2014 ken MFC the mpr(4) driver for LSI's 12Gb SAS cards. This includes r265236, r265237, r265241 and r265261: ------------------------------------------------------------------------ r265236 | ken | 2014-05-02 14:25:09 -0600 (Fri, 02 May 2014) | 51 lines Bring in the mpr(4) driver for LSI's MPT3 12Gb SAS controllers. This is derived from the mps(4) driver, but it supports only the 12Gb IT and IR hardware including the SAS 3004, SAS 3008 and SAS 3108. Some notes about this driver: o The 12Gb hardware can do "FastPath" I/O, and that capability is included in this driver. o WarpDrive functionality has been removed, since it isn't supported in the 12Gb driver interface. o The Scatter/Gather list handling code is significantly different between the 6Gb and 12Gb hardware. The 12Gb boards support IEEE Scatter/Gather lists. Thanks to LSI for developing and testing this driver for FreeBSD. share/man/man4/mpr.4: mpr(4) man page. sys/dev/mpr/*: mpr(4) driver files. sys/modules/Makefile, sys/modules/mpr/Makefile: Add a module Makefile for the mpr(4) driver. sys/conf/files: Add the mpr(4) driver. sys/amd64/conf/GENERIC, sys/i386/conf/GENERIC, sys/mips/conf/OCTEON1, sys/sparc64/conf/GENERIC: Add the mpr(4) driver to all config files that currently have the mps(4) driver. sys/ia64/conf/GENERIC: Add the mps(4) and mpr(4) drivers to the ia64 GENERIC config file. sys/i386/conf/XEN: Exclude the mpr module from building here. Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> Tested by: Chris Reeves <chrisr@spectralogic.com> Sponsored by: LSI, Spectra Logic Relnotes: LSI 12Gb SAS driver mpr(4) added ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265237 | ken | 2014-05-02 14:36:20 -0600 (Fri, 02 May 2014) | 8 lines Add the mpr(4) man page to the man4 Makefile. This should have been included in r265236. Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> MFC after: 3 days Sponsored by: LSI, Spectra Logic ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265241 | brueffer | 2014-05-02 15:14:28 -0600 (Fri, 02 May 2014) | 2 lines Use our standard SYNOPSIS wording; perform some cleanup while here. ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265261 | brueffer | 2014-05-03 05:15:28 -0600 (Sat, 03 May 2014) | 2 lines Add a missing colon. ------------------------------------------------------------------------ Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> Tested by: Chris Reeves <chrisr@spectralogic.com> Sponsored by: LSI, Spectra Logic Relnotes: LSI 12Gb SAS driver mpr(4) added diff 265388 Mon May 05 20:43:36 MDT 2014 ken MFC the mpr(4) driver for LSI's 12Gb SAS cards. This includes r265236, r265237, r265241 and r265261: ------------------------------------------------------------------------ r265236 | ken | 2014-05-02 14:25:09 -0600 (Fri, 02 May 2014) | 51 lines Bring in the mpr(4) driver for LSI's MPT3 12Gb SAS controllers. This is derived from the mps(4) driver, but it supports only the 12Gb IT and IR hardware including the SAS 3004, SAS 3008 and SAS 3108. Some notes about this driver: o The 12Gb hardware can do "FastPath" I/O, and that capability is included in this driver. o WarpDrive functionality has been removed, since it isn't supported in the 12Gb driver interface. o The Scatter/Gather list handling code is significantly different between the 6Gb and 12Gb hardware. The 12Gb boards support IEEE Scatter/Gather lists. Thanks to LSI for developing and testing this driver for FreeBSD. share/man/man4/mpr.4: mpr(4) man page. sys/dev/mpr/*: mpr(4) driver files. sys/modules/Makefile, sys/modules/mpr/Makefile: Add a module Makefile for the mpr(4) driver. sys/conf/files: Add the mpr(4) driver. sys/amd64/conf/GENERIC, sys/i386/conf/GENERIC, sys/mips/conf/OCTEON1, sys/sparc64/conf/GENERIC: Add the mpr(4) driver to all config files that currently have the mps(4) driver. sys/ia64/conf/GENERIC: Add the mps(4) and mpr(4) drivers to the ia64 GENERIC config file. sys/i386/conf/XEN: Exclude the mpr module from building here. Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> Tested by: Chris Reeves <chrisr@spectralogic.com> Sponsored by: LSI, Spectra Logic Relnotes: LSI 12Gb SAS driver mpr(4) added ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265237 | ken | 2014-05-02 14:36:20 -0600 (Fri, 02 May 2014) | 8 lines Add the mpr(4) man page to the man4 Makefile. This should have been included in r265236. Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> MFC after: 3 days Sponsored by: LSI, Spectra Logic ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265241 | brueffer | 2014-05-02 15:14:28 -0600 (Fri, 02 May 2014) | 2 lines Use our standard SYNOPSIS wording; perform some cleanup while here. ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265261 | brueffer | 2014-05-03 05:15:28 -0600 (Sat, 03 May 2014) | 2 lines Add a missing colon. ------------------------------------------------------------------------ Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> Tested by: Chris Reeves <chrisr@spectralogic.com> Sponsored by: LSI, Spectra Logic Relnotes: LSI 12Gb SAS driver mpr(4) added diff 265388 Mon May 05 20:43:36 MDT 2014 ken MFC the mpr(4) driver for LSI's 12Gb SAS cards. This includes r265236, r265237, r265241 and r265261: ------------------------------------------------------------------------ r265236 | ken | 2014-05-02 14:25:09 -0600 (Fri, 02 May 2014) | 51 lines Bring in the mpr(4) driver for LSI's MPT3 12Gb SAS controllers. This is derived from the mps(4) driver, but it supports only the 12Gb IT and IR hardware including the SAS 3004, SAS 3008 and SAS 3108. Some notes about this driver: o The 12Gb hardware can do "FastPath" I/O, and that capability is included in this driver. o WarpDrive functionality has been removed, since it isn't supported in the 12Gb driver interface. o The Scatter/Gather list handling code is significantly different between the 6Gb and 12Gb hardware. The 12Gb boards support IEEE Scatter/Gather lists. Thanks to LSI for developing and testing this driver for FreeBSD. share/man/man4/mpr.4: mpr(4) man page. sys/dev/mpr/*: mpr(4) driver files. sys/modules/Makefile, sys/modules/mpr/Makefile: Add a module Makefile for the mpr(4) driver. sys/conf/files: Add the mpr(4) driver. sys/amd64/conf/GENERIC, sys/i386/conf/GENERIC, sys/mips/conf/OCTEON1, sys/sparc64/conf/GENERIC: Add the mpr(4) driver to all config files that currently have the mps(4) driver. sys/ia64/conf/GENERIC: Add the mps(4) and mpr(4) drivers to the ia64 GENERIC config file. sys/i386/conf/XEN: Exclude the mpr module from building here. Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> Tested by: Chris Reeves <chrisr@spectralogic.com> Sponsored by: LSI, Spectra Logic Relnotes: LSI 12Gb SAS driver mpr(4) added ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265237 | ken | 2014-05-02 14:36:20 -0600 (Fri, 02 May 2014) | 8 lines Add the mpr(4) man page to the man4 Makefile. This should have been included in r265236. Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> MFC after: 3 days Sponsored by: LSI, Spectra Logic ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265241 | brueffer | 2014-05-02 15:14:28 -0600 (Fri, 02 May 2014) | 2 lines Use our standard SYNOPSIS wording; perform some cleanup while here. ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265261 | brueffer | 2014-05-03 05:15:28 -0600 (Sat, 03 May 2014) | 2 lines Add a missing colon. ------------------------------------------------------------------------ Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> Tested by: Chris Reeves <chrisr@spectralogic.com> Sponsored by: LSI, Spectra Logic Relnotes: LSI 12Gb SAS driver mpr(4) added diff 265388 Mon May 05 20:43:36 MDT 2014 ken MFC the mpr(4) driver for LSI's 12Gb SAS cards. This includes r265236, r265237, r265241 and r265261: ------------------------------------------------------------------------ r265236 | ken | 2014-05-02 14:25:09 -0600 (Fri, 02 May 2014) | 51 lines Bring in the mpr(4) driver for LSI's MPT3 12Gb SAS controllers. This is derived from the mps(4) driver, but it supports only the 12Gb IT and IR hardware including the SAS 3004, SAS 3008 and SAS 3108. Some notes about this driver: o The 12Gb hardware can do "FastPath" I/O, and that capability is included in this driver. o WarpDrive functionality has been removed, since it isn't supported in the 12Gb driver interface. o The Scatter/Gather list handling code is significantly different between the 6Gb and 12Gb hardware. The 12Gb boards support IEEE Scatter/Gather lists. Thanks to LSI for developing and testing this driver for FreeBSD. share/man/man4/mpr.4: mpr(4) man page. sys/dev/mpr/*: mpr(4) driver files. sys/modules/Makefile, sys/modules/mpr/Makefile: Add a module Makefile for the mpr(4) driver. sys/conf/files: Add the mpr(4) driver. sys/amd64/conf/GENERIC, sys/i386/conf/GENERIC, sys/mips/conf/OCTEON1, sys/sparc64/conf/GENERIC: Add the mpr(4) driver to all config files that currently have the mps(4) driver. sys/ia64/conf/GENERIC: Add the mps(4) and mpr(4) drivers to the ia64 GENERIC config file. sys/i386/conf/XEN: Exclude the mpr module from building here. Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> Tested by: Chris Reeves <chrisr@spectralogic.com> Sponsored by: LSI, Spectra Logic Relnotes: LSI 12Gb SAS driver mpr(4) added ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265237 | ken | 2014-05-02 14:36:20 -0600 (Fri, 02 May 2014) | 8 lines Add the mpr(4) man page to the man4 Makefile. This should have been included in r265236. Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> MFC after: 3 days Sponsored by: LSI, Spectra Logic ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265241 | brueffer | 2014-05-02 15:14:28 -0600 (Fri, 02 May 2014) | 2 lines Use our standard SYNOPSIS wording; perform some cleanup while here. ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265261 | brueffer | 2014-05-03 05:15:28 -0600 (Sat, 03 May 2014) | 2 lines Add a missing colon. ------------------------------------------------------------------------ Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> Tested by: Chris Reeves <chrisr@spectralogic.com> Sponsored by: LSI, Spectra Logic Relnotes: LSI 12Gb SAS driver mpr(4) added diff 265388 Mon May 05 20:43:36 MDT 2014 ken MFC the mpr(4) driver for LSI's 12Gb SAS cards. This includes r265236, r265237, r265241 and r265261: ------------------------------------------------------------------------ r265236 | ken | 2014-05-02 14:25:09 -0600 (Fri, 02 May 2014) | 51 lines Bring in the mpr(4) driver for LSI's MPT3 12Gb SAS controllers. This is derived from the mps(4) driver, but it supports only the 12Gb IT and IR hardware including the SAS 3004, SAS 3008 and SAS 3108. Some notes about this driver: o The 12Gb hardware can do "FastPath" I/O, and that capability is included in this driver. o WarpDrive functionality has been removed, since it isn't supported in the 12Gb driver interface. o The Scatter/Gather list handling code is significantly different between the 6Gb and 12Gb hardware. The 12Gb boards support IEEE Scatter/Gather lists. Thanks to LSI for developing and testing this driver for FreeBSD. share/man/man4/mpr.4: mpr(4) man page. sys/dev/mpr/*: mpr(4) driver files. sys/modules/Makefile, sys/modules/mpr/Makefile: Add a module Makefile for the mpr(4) driver. sys/conf/files: Add the mpr(4) driver. sys/amd64/conf/GENERIC, sys/i386/conf/GENERIC, sys/mips/conf/OCTEON1, sys/sparc64/conf/GENERIC: Add the mpr(4) driver to all config files that currently have the mps(4) driver. sys/ia64/conf/GENERIC: Add the mps(4) and mpr(4) drivers to the ia64 GENERIC config file. sys/i386/conf/XEN: Exclude the mpr module from building here. Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> Tested by: Chris Reeves <chrisr@spectralogic.com> Sponsored by: LSI, Spectra Logic Relnotes: LSI 12Gb SAS driver mpr(4) added ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265237 | ken | 2014-05-02 14:36:20 -0600 (Fri, 02 May 2014) | 8 lines Add the mpr(4) man page to the man4 Makefile. This should have been included in r265236. Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> MFC after: 3 days Sponsored by: LSI, Spectra Logic ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265241 | brueffer | 2014-05-02 15:14:28 -0600 (Fri, 02 May 2014) | 2 lines Use our standard SYNOPSIS wording; perform some cleanup while here. ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265261 | brueffer | 2014-05-03 05:15:28 -0600 (Sat, 03 May 2014) | 2 lines Add a missing colon. ------------------------------------------------------------------------ Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> Tested by: Chris Reeves <chrisr@spectralogic.com> Sponsored by: LSI, Spectra Logic Relnotes: LSI 12Gb SAS driver mpr(4) added diff 265388 Mon May 05 20:43:36 MDT 2014 ken MFC the mpr(4) driver for LSI's 12Gb SAS cards. This includes r265236, r265237, r265241 and r265261: ------------------------------------------------------------------------ r265236 | ken | 2014-05-02 14:25:09 -0600 (Fri, 02 May 2014) | 51 lines Bring in the mpr(4) driver for LSI's MPT3 12Gb SAS controllers. This is derived from the mps(4) driver, but it supports only the 12Gb IT and IR hardware including the SAS 3004, SAS 3008 and SAS 3108. Some notes about this driver: o The 12Gb hardware can do "FastPath" I/O, and that capability is included in this driver. o WarpDrive functionality has been removed, since it isn't supported in the 12Gb driver interface. o The Scatter/Gather list handling code is significantly different between the 6Gb and 12Gb hardware. The 12Gb boards support IEEE Scatter/Gather lists. Thanks to LSI for developing and testing this driver for FreeBSD. share/man/man4/mpr.4: mpr(4) man page. sys/dev/mpr/*: mpr(4) driver files. sys/modules/Makefile, sys/modules/mpr/Makefile: Add a module Makefile for the mpr(4) driver. sys/conf/files: Add the mpr(4) driver. sys/amd64/conf/GENERIC, sys/i386/conf/GENERIC, sys/mips/conf/OCTEON1, sys/sparc64/conf/GENERIC: Add the mpr(4) driver to all config files that currently have the mps(4) driver. sys/ia64/conf/GENERIC: Add the mps(4) and mpr(4) drivers to the ia64 GENERIC config file. sys/i386/conf/XEN: Exclude the mpr module from building here. Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> Tested by: Chris Reeves <chrisr@spectralogic.com> Sponsored by: LSI, Spectra Logic Relnotes: LSI 12Gb SAS driver mpr(4) added ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265237 | ken | 2014-05-02 14:36:20 -0600 (Fri, 02 May 2014) | 8 lines Add the mpr(4) man page to the man4 Makefile. This should have been included in r265236. Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> MFC after: 3 days Sponsored by: LSI, Spectra Logic ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265241 | brueffer | 2014-05-02 15:14:28 -0600 (Fri, 02 May 2014) | 2 lines Use our standard SYNOPSIS wording; perform some cleanup while here. ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265261 | brueffer | 2014-05-03 05:15:28 -0600 (Sat, 03 May 2014) | 2 lines Add a missing colon. ------------------------------------------------------------------------ Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> Tested by: Chris Reeves <chrisr@spectralogic.com> Sponsored by: LSI, Spectra Logic Relnotes: LSI 12Gb SAS driver mpr(4) added diff 265388 Mon May 05 20:43:36 MDT 2014 ken MFC the mpr(4) driver for LSI's 12Gb SAS cards. This includes r265236, r265237, r265241 and r265261: ------------------------------------------------------------------------ r265236 | ken | 2014-05-02 14:25:09 -0600 (Fri, 02 May 2014) | 51 lines Bring in the mpr(4) driver for LSI's MPT3 12Gb SAS controllers. This is derived from the mps(4) driver, but it supports only the 12Gb IT and IR hardware including the SAS 3004, SAS 3008 and SAS 3108. Some notes about this driver: o The 12Gb hardware can do "FastPath" I/O, and that capability is included in this driver. o WarpDrive functionality has been removed, since it isn't supported in the 12Gb driver interface. o The Scatter/Gather list handling code is significantly different between the 6Gb and 12Gb hardware. The 12Gb boards support IEEE Scatter/Gather lists. Thanks to LSI for developing and testing this driver for FreeBSD. share/man/man4/mpr.4: mpr(4) man page. sys/dev/mpr/*: mpr(4) driver files. sys/modules/Makefile, sys/modules/mpr/Makefile: Add a module Makefile for the mpr(4) driver. sys/conf/files: Add the mpr(4) driver. sys/amd64/conf/GENERIC, sys/i386/conf/GENERIC, sys/mips/conf/OCTEON1, sys/sparc64/conf/GENERIC: Add the mpr(4) driver to all config files that currently have the mps(4) driver. sys/ia64/conf/GENERIC: Add the mps(4) and mpr(4) drivers to the ia64 GENERIC config file. sys/i386/conf/XEN: Exclude the mpr module from building here. Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> Tested by: Chris Reeves <chrisr@spectralogic.com> Sponsored by: LSI, Spectra Logic Relnotes: LSI 12Gb SAS driver mpr(4) added ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265237 | ken | 2014-05-02 14:36:20 -0600 (Fri, 02 May 2014) | 8 lines Add the mpr(4) man page to the man4 Makefile. This should have been included in r265236. Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> MFC after: 3 days Sponsored by: LSI, Spectra Logic ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265241 | brueffer | 2014-05-02 15:14:28 -0600 (Fri, 02 May 2014) | 2 lines Use our standard SYNOPSIS wording; perform some cleanup while here. ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265261 | brueffer | 2014-05-03 05:15:28 -0600 (Sat, 03 May 2014) | 2 lines Add a missing colon. ------------------------------------------------------------------------ Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> Tested by: Chris Reeves <chrisr@spectralogic.com> Sponsored by: LSI, Spectra Logic Relnotes: LSI 12Gb SAS driver mpr(4) added diff 265388 Mon May 05 20:43:36 MDT 2014 ken MFC the mpr(4) driver for LSI's 12Gb SAS cards. This includes r265236, r265237, r265241 and r265261: ------------------------------------------------------------------------ r265236 | ken | 2014-05-02 14:25:09 -0600 (Fri, 02 May 2014) | 51 lines Bring in the mpr(4) driver for LSI's MPT3 12Gb SAS controllers. This is derived from the mps(4) driver, but it supports only the 12Gb IT and IR hardware including the SAS 3004, SAS 3008 and SAS 3108. Some notes about this driver: o The 12Gb hardware can do "FastPath" I/O, and that capability is included in this driver. o WarpDrive functionality has been removed, since it isn't supported in the 12Gb driver interface. o The Scatter/Gather list handling code is significantly different between the 6Gb and 12Gb hardware. The 12Gb boards support IEEE Scatter/Gather lists. Thanks to LSI for developing and testing this driver for FreeBSD. share/man/man4/mpr.4: mpr(4) man page. sys/dev/mpr/*: mpr(4) driver files. sys/modules/Makefile, sys/modules/mpr/Makefile: Add a module Makefile for the mpr(4) driver. sys/conf/files: Add the mpr(4) driver. sys/amd64/conf/GENERIC, sys/i386/conf/GENERIC, sys/mips/conf/OCTEON1, sys/sparc64/conf/GENERIC: Add the mpr(4) driver to all config files that currently have the mps(4) driver. sys/ia64/conf/GENERIC: Add the mps(4) and mpr(4) drivers to the ia64 GENERIC config file. sys/i386/conf/XEN: Exclude the mpr module from building here. Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> Tested by: Chris Reeves <chrisr@spectralogic.com> Sponsored by: LSI, Spectra Logic Relnotes: LSI 12Gb SAS driver mpr(4) added ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265237 | ken | 2014-05-02 14:36:20 -0600 (Fri, 02 May 2014) | 8 lines Add the mpr(4) man page to the man4 Makefile. This should have been included in r265236. Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> MFC after: 3 days Sponsored by: LSI, Spectra Logic ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265241 | brueffer | 2014-05-02 15:14:28 -0600 (Fri, 02 May 2014) | 2 lines Use our standard SYNOPSIS wording; perform some cleanup while here. ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265261 | brueffer | 2014-05-03 05:15:28 -0600 (Sat, 03 May 2014) | 2 lines Add a missing colon. ------------------------------------------------------------------------ Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> Tested by: Chris Reeves <chrisr@spectralogic.com> Sponsored by: LSI, Spectra Logic Relnotes: LSI 12Gb SAS driver mpr(4) added diff 265388 Mon May 05 20:43:36 MDT 2014 ken MFC the mpr(4) driver for LSI's 12Gb SAS cards. This includes r265236, r265237, r265241 and r265261: ------------------------------------------------------------------------ r265236 | ken | 2014-05-02 14:25:09 -0600 (Fri, 02 May 2014) | 51 lines Bring in the mpr(4) driver for LSI's MPT3 12Gb SAS controllers. This is derived from the mps(4) driver, but it supports only the 12Gb IT and IR hardware including the SAS 3004, SAS 3008 and SAS 3108. Some notes about this driver: o The 12Gb hardware can do "FastPath" I/O, and that capability is included in this driver. o WarpDrive functionality has been removed, since it isn't supported in the 12Gb driver interface. o The Scatter/Gather list handling code is significantly different between the 6Gb and 12Gb hardware. The 12Gb boards support IEEE Scatter/Gather lists. Thanks to LSI for developing and testing this driver for FreeBSD. share/man/man4/mpr.4: mpr(4) man page. sys/dev/mpr/*: mpr(4) driver files. sys/modules/Makefile, sys/modules/mpr/Makefile: Add a module Makefile for the mpr(4) driver. sys/conf/files: Add the mpr(4) driver. sys/amd64/conf/GENERIC, sys/i386/conf/GENERIC, sys/mips/conf/OCTEON1, sys/sparc64/conf/GENERIC: Add the mpr(4) driver to all config files that currently have the mps(4) driver. sys/ia64/conf/GENERIC: Add the mps(4) and mpr(4) drivers to the ia64 GENERIC config file. sys/i386/conf/XEN: Exclude the mpr module from building here. Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> Tested by: Chris Reeves <chrisr@spectralogic.com> Sponsored by: LSI, Spectra Logic Relnotes: LSI 12Gb SAS driver mpr(4) added ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265237 | ken | 2014-05-02 14:36:20 -0600 (Fri, 02 May 2014) | 8 lines Add the mpr(4) man page to the man4 Makefile. This should have been included in r265236. Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> MFC after: 3 days Sponsored by: LSI, Spectra Logic ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265241 | brueffer | 2014-05-02 15:14:28 -0600 (Fri, 02 May 2014) | 2 lines Use our standard SYNOPSIS wording; perform some cleanup while here. ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265261 | brueffer | 2014-05-03 05:15:28 -0600 (Sat, 03 May 2014) | 2 lines Add a missing colon. ------------------------------------------------------------------------ Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> Tested by: Chris Reeves <chrisr@spectralogic.com> Sponsored by: LSI, Spectra Logic Relnotes: LSI 12Gb SAS driver mpr(4) added diff 265388 Mon May 05 20:43:36 MDT 2014 ken MFC the mpr(4) driver for LSI's 12Gb SAS cards. This includes r265236, r265237, r265241 and r265261: ------------------------------------------------------------------------ r265236 | ken | 2014-05-02 14:25:09 -0600 (Fri, 02 May 2014) | 51 lines Bring in the mpr(4) driver for LSI's MPT3 12Gb SAS controllers. This is derived from the mps(4) driver, but it supports only the 12Gb IT and IR hardware including the SAS 3004, SAS 3008 and SAS 3108. Some notes about this driver: o The 12Gb hardware can do "FastPath" I/O, and that capability is included in this driver. o WarpDrive functionality has been removed, since it isn't supported in the 12Gb driver interface. o The Scatter/Gather list handling code is significantly different between the 6Gb and 12Gb hardware. The 12Gb boards support IEEE Scatter/Gather lists. Thanks to LSI for developing and testing this driver for FreeBSD. share/man/man4/mpr.4: mpr(4) man page. sys/dev/mpr/*: mpr(4) driver files. sys/modules/Makefile, sys/modules/mpr/Makefile: Add a module Makefile for the mpr(4) driver. sys/conf/files: Add the mpr(4) driver. sys/amd64/conf/GENERIC, sys/i386/conf/GENERIC, sys/mips/conf/OCTEON1, sys/sparc64/conf/GENERIC: Add the mpr(4) driver to all config files that currently have the mps(4) driver. sys/ia64/conf/GENERIC: Add the mps(4) and mpr(4) drivers to the ia64 GENERIC config file. sys/i386/conf/XEN: Exclude the mpr module from building here. Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> Tested by: Chris Reeves <chrisr@spectralogic.com> Sponsored by: LSI, Spectra Logic Relnotes: LSI 12Gb SAS driver mpr(4) added ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265237 | ken | 2014-05-02 14:36:20 -0600 (Fri, 02 May 2014) | 8 lines Add the mpr(4) man page to the man4 Makefile. This should have been included in r265236. Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> MFC after: 3 days Sponsored by: LSI, Spectra Logic ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265241 | brueffer | 2014-05-02 15:14:28 -0600 (Fri, 02 May 2014) | 2 lines Use our standard SYNOPSIS wording; perform some cleanup while here. ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265261 | brueffer | 2014-05-03 05:15:28 -0600 (Sat, 03 May 2014) | 2 lines Add a missing colon. ------------------------------------------------------------------------ Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> Tested by: Chris Reeves <chrisr@spectralogic.com> Sponsored by: LSI, Spectra Logic Relnotes: LSI 12Gb SAS driver mpr(4) added diff 265388 Mon May 05 20:43:36 MDT 2014 ken MFC the mpr(4) driver for LSI's 12Gb SAS cards. This includes r265236, r265237, r265241 and r265261: ------------------------------------------------------------------------ r265236 | ken | 2014-05-02 14:25:09 -0600 (Fri, 02 May 2014) | 51 lines Bring in the mpr(4) driver for LSI's MPT3 12Gb SAS controllers. This is derived from the mps(4) driver, but it supports only the 12Gb IT and IR hardware including the SAS 3004, SAS 3008 and SAS 3108. Some notes about this driver: o The 12Gb hardware can do "FastPath" I/O, and that capability is included in this driver. o WarpDrive functionality has been removed, since it isn't supported in the 12Gb driver interface. o The Scatter/Gather list handling code is significantly different between the 6Gb and 12Gb hardware. The 12Gb boards support IEEE Scatter/Gather lists. Thanks to LSI for developing and testing this driver for FreeBSD. share/man/man4/mpr.4: mpr(4) man page. sys/dev/mpr/*: mpr(4) driver files. sys/modules/Makefile, sys/modules/mpr/Makefile: Add a module Makefile for the mpr(4) driver. sys/conf/files: Add the mpr(4) driver. sys/amd64/conf/GENERIC, sys/i386/conf/GENERIC, sys/mips/conf/OCTEON1, sys/sparc64/conf/GENERIC: Add the mpr(4) driver to all config files that currently have the mps(4) driver. sys/ia64/conf/GENERIC: Add the mps(4) and mpr(4) drivers to the ia64 GENERIC config file. sys/i386/conf/XEN: Exclude the mpr module from building here. Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> Tested by: Chris Reeves <chrisr@spectralogic.com> Sponsored by: LSI, Spectra Logic Relnotes: LSI 12Gb SAS driver mpr(4) added ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265237 | ken | 2014-05-02 14:36:20 -0600 (Fri, 02 May 2014) | 8 lines Add the mpr(4) man page to the man4 Makefile. This should have been included in r265236. Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> MFC after: 3 days Sponsored by: LSI, Spectra Logic ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265241 | brueffer | 2014-05-02 15:14:28 -0600 (Fri, 02 May 2014) | 2 lines Use our standard SYNOPSIS wording; perform some cleanup while here. ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265261 | brueffer | 2014-05-03 05:15:28 -0600 (Sat, 03 May 2014) | 2 lines Add a missing colon. ------------------------------------------------------------------------ Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> Tested by: Chris Reeves <chrisr@spectralogic.com> Sponsored by: LSI, Spectra Logic Relnotes: LSI 12Gb SAS driver mpr(4) added diff 265388 Mon May 05 20:43:36 MDT 2014 ken MFC the mpr(4) driver for LSI's 12Gb SAS cards. This includes r265236, r265237, r265241 and r265261: ------------------------------------------------------------------------ r265236 | ken | 2014-05-02 14:25:09 -0600 (Fri, 02 May 2014) | 51 lines Bring in the mpr(4) driver for LSI's MPT3 12Gb SAS controllers. This is derived from the mps(4) driver, but it supports only the 12Gb IT and IR hardware including the SAS 3004, SAS 3008 and SAS 3108. Some notes about this driver: o The 12Gb hardware can do "FastPath" I/O, and that capability is included in this driver. o WarpDrive functionality has been removed, since it isn't supported in the 12Gb driver interface. o The Scatter/Gather list handling code is significantly different between the 6Gb and 12Gb hardware. The 12Gb boards support IEEE Scatter/Gather lists. Thanks to LSI for developing and testing this driver for FreeBSD. share/man/man4/mpr.4: mpr(4) man page. sys/dev/mpr/*: mpr(4) driver files. sys/modules/Makefile, sys/modules/mpr/Makefile: Add a module Makefile for the mpr(4) driver. sys/conf/files: Add the mpr(4) driver. sys/amd64/conf/GENERIC, sys/i386/conf/GENERIC, sys/mips/conf/OCTEON1, sys/sparc64/conf/GENERIC: Add the mpr(4) driver to all config files that currently have the mps(4) driver. sys/ia64/conf/GENERIC: Add the mps(4) and mpr(4) drivers to the ia64 GENERIC config file. sys/i386/conf/XEN: Exclude the mpr module from building here. Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> Tested by: Chris Reeves <chrisr@spectralogic.com> Sponsored by: LSI, Spectra Logic Relnotes: LSI 12Gb SAS driver mpr(4) added ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265237 | ken | 2014-05-02 14:36:20 -0600 (Fri, 02 May 2014) | 8 lines Add the mpr(4) man page to the man4 Makefile. This should have been included in r265236. Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> MFC after: 3 days Sponsored by: LSI, Spectra Logic ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265241 | brueffer | 2014-05-02 15:14:28 -0600 (Fri, 02 May 2014) | 2 lines Use our standard SYNOPSIS wording; perform some cleanup while here. ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265261 | brueffer | 2014-05-03 05:15:28 -0600 (Sat, 03 May 2014) | 2 lines Add a missing colon. ------------------------------------------------------------------------ Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> Tested by: Chris Reeves <chrisr@spectralogic.com> Sponsored by: LSI, Spectra Logic Relnotes: LSI 12Gb SAS driver mpr(4) added diff 265388 Mon May 05 20:43:36 MDT 2014 ken MFC the mpr(4) driver for LSI's 12Gb SAS cards. This includes r265236, r265237, r265241 and r265261: ------------------------------------------------------------------------ r265236 | ken | 2014-05-02 14:25:09 -0600 (Fri, 02 May 2014) | 51 lines Bring in the mpr(4) driver for LSI's MPT3 12Gb SAS controllers. This is derived from the mps(4) driver, but it supports only the 12Gb IT and IR hardware including the SAS 3004, SAS 3008 and SAS 3108. Some notes about this driver: o The 12Gb hardware can do "FastPath" I/O, and that capability is included in this driver. o WarpDrive functionality has been removed, since it isn't supported in the 12Gb driver interface. o The Scatter/Gather list handling code is significantly different between the 6Gb and 12Gb hardware. The 12Gb boards support IEEE Scatter/Gather lists. Thanks to LSI for developing and testing this driver for FreeBSD. share/man/man4/mpr.4: mpr(4) man page. sys/dev/mpr/*: mpr(4) driver files. sys/modules/Makefile, sys/modules/mpr/Makefile: Add a module Makefile for the mpr(4) driver. sys/conf/files: Add the mpr(4) driver. sys/amd64/conf/GENERIC, sys/i386/conf/GENERIC, sys/mips/conf/OCTEON1, sys/sparc64/conf/GENERIC: Add the mpr(4) driver to all config files that currently have the mps(4) driver. sys/ia64/conf/GENERIC: Add the mps(4) and mpr(4) drivers to the ia64 GENERIC config file. sys/i386/conf/XEN: Exclude the mpr module from building here. Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> Tested by: Chris Reeves <chrisr@spectralogic.com> Sponsored by: LSI, Spectra Logic Relnotes: LSI 12Gb SAS driver mpr(4) added ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265237 | ken | 2014-05-02 14:36:20 -0600 (Fri, 02 May 2014) | 8 lines Add the mpr(4) man page to the man4 Makefile. This should have been included in r265236. Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> MFC after: 3 days Sponsored by: LSI, Spectra Logic ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265241 | brueffer | 2014-05-02 15:14:28 -0600 (Fri, 02 May 2014) | 2 lines Use our standard SYNOPSIS wording; perform some cleanup while here. ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265261 | brueffer | 2014-05-03 05:15:28 -0600 (Sat, 03 May 2014) | 2 lines Add a missing colon. ------------------------------------------------------------------------ Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> Tested by: Chris Reeves <chrisr@spectralogic.com> Sponsored by: LSI, Spectra Logic Relnotes: LSI 12Gb SAS driver mpr(4) added diff 265388 Mon May 05 20:43:36 MDT 2014 ken MFC the mpr(4) driver for LSI's 12Gb SAS cards. This includes r265236, r265237, r265241 and r265261: ------------------------------------------------------------------------ r265236 | ken | 2014-05-02 14:25:09 -0600 (Fri, 02 May 2014) | 51 lines Bring in the mpr(4) driver for LSI's MPT3 12Gb SAS controllers. This is derived from the mps(4) driver, but it supports only the 12Gb IT and IR hardware including the SAS 3004, SAS 3008 and SAS 3108. Some notes about this driver: o The 12Gb hardware can do "FastPath" I/O, and that capability is included in this driver. o WarpDrive functionality has been removed, since it isn't supported in the 12Gb driver interface. o The Scatter/Gather list handling code is significantly different between the 6Gb and 12Gb hardware. The 12Gb boards support IEEE Scatter/Gather lists. Thanks to LSI for developing and testing this driver for FreeBSD. share/man/man4/mpr.4: mpr(4) man page. sys/dev/mpr/*: mpr(4) driver files. sys/modules/Makefile, sys/modules/mpr/Makefile: Add a module Makefile for the mpr(4) driver. sys/conf/files: Add the mpr(4) driver. sys/amd64/conf/GENERIC, sys/i386/conf/GENERIC, sys/mips/conf/OCTEON1, sys/sparc64/conf/GENERIC: Add the mpr(4) driver to all config files that currently have the mps(4) driver. sys/ia64/conf/GENERIC: Add the mps(4) and mpr(4) drivers to the ia64 GENERIC config file. sys/i386/conf/XEN: Exclude the mpr module from building here. Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> Tested by: Chris Reeves <chrisr@spectralogic.com> Sponsored by: LSI, Spectra Logic Relnotes: LSI 12Gb SAS driver mpr(4) added ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265237 | ken | 2014-05-02 14:36:20 -0600 (Fri, 02 May 2014) | 8 lines Add the mpr(4) man page to the man4 Makefile. This should have been included in r265236. Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> MFC after: 3 days Sponsored by: LSI, Spectra Logic ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265241 | brueffer | 2014-05-02 15:14:28 -0600 (Fri, 02 May 2014) | 2 lines Use our standard SYNOPSIS wording; perform some cleanup while here. ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265261 | brueffer | 2014-05-03 05:15:28 -0600 (Sat, 03 May 2014) | 2 lines Add a missing colon. ------------------------------------------------------------------------ Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> Tested by: Chris Reeves <chrisr@spectralogic.com> Sponsored by: LSI, Spectra Logic Relnotes: LSI 12Gb SAS driver mpr(4) added diff 265388 Mon May 05 20:43:36 MDT 2014 ken MFC the mpr(4) driver for LSI's 12Gb SAS cards. This includes r265236, r265237, r265241 and r265261: ------------------------------------------------------------------------ r265236 | ken | 2014-05-02 14:25:09 -0600 (Fri, 02 May 2014) | 51 lines Bring in the mpr(4) driver for LSI's MPT3 12Gb SAS controllers. This is derived from the mps(4) driver, but it supports only the 12Gb IT and IR hardware including the SAS 3004, SAS 3008 and SAS 3108. Some notes about this driver: o The 12Gb hardware can do "FastPath" I/O, and that capability is included in this driver. o WarpDrive functionality has been removed, since it isn't supported in the 12Gb driver interface. o The Scatter/Gather list handling code is significantly different between the 6Gb and 12Gb hardware. The 12Gb boards support IEEE Scatter/Gather lists. Thanks to LSI for developing and testing this driver for FreeBSD. share/man/man4/mpr.4: mpr(4) man page. sys/dev/mpr/*: mpr(4) driver files. sys/modules/Makefile, sys/modules/mpr/Makefile: Add a module Makefile for the mpr(4) driver. sys/conf/files: Add the mpr(4) driver. sys/amd64/conf/GENERIC, sys/i386/conf/GENERIC, sys/mips/conf/OCTEON1, sys/sparc64/conf/GENERIC: Add the mpr(4) driver to all config files that currently have the mps(4) driver. sys/ia64/conf/GENERIC: Add the mps(4) and mpr(4) drivers to the ia64 GENERIC config file. sys/i386/conf/XEN: Exclude the mpr module from building here. Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> Tested by: Chris Reeves <chrisr@spectralogic.com> Sponsored by: LSI, Spectra Logic Relnotes: LSI 12Gb SAS driver mpr(4) added ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265237 | ken | 2014-05-02 14:36:20 -0600 (Fri, 02 May 2014) | 8 lines Add the mpr(4) man page to the man4 Makefile. This should have been included in r265236. Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> MFC after: 3 days Sponsored by: LSI, Spectra Logic ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265241 | brueffer | 2014-05-02 15:14:28 -0600 (Fri, 02 May 2014) | 2 lines Use our standard SYNOPSIS wording; perform some cleanup while here. ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265261 | brueffer | 2014-05-03 05:15:28 -0600 (Sat, 03 May 2014) | 2 lines Add a missing colon. ------------------------------------------------------------------------ Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> Tested by: Chris Reeves <chrisr@spectralogic.com> Sponsored by: LSI, Spectra Logic Relnotes: LSI 12Gb SAS driver mpr(4) added |
| /freebsd-10.2-release/sys/dev/mpr/ | ||
| H A D | mpr_config.c | diff 265388 Mon May 05 20:43:36 MDT 2014 ken MFC the mpr(4) driver for LSI's 12Gb SAS cards. This includes r265236, r265237, r265241 and r265261: ------------------------------------------------------------------------ r265236 | ken | 2014-05-02 14:25:09 -0600 (Fri, 02 May 2014) | 51 lines Bring in the mpr(4) driver for LSI's MPT3 12Gb SAS controllers. This is derived from the mps(4) driver, but it supports only the 12Gb IT and IR hardware including the SAS 3004, SAS 3008 and SAS 3108. Some notes about this driver: o The 12Gb hardware can do "FastPath" I/O, and that capability is included in this driver. o WarpDrive functionality has been removed, since it isn't supported in the 12Gb driver interface. o The Scatter/Gather list handling code is significantly different between the 6Gb and 12Gb hardware. The 12Gb boards support IEEE Scatter/Gather lists. Thanks to LSI for developing and testing this driver for FreeBSD. share/man/man4/mpr.4: mpr(4) man page. sys/dev/mpr/*: mpr(4) driver files. sys/modules/Makefile, sys/modules/mpr/Makefile: Add a module Makefile for the mpr(4) driver. sys/conf/files: Add the mpr(4) driver. sys/amd64/conf/GENERIC, sys/i386/conf/GENERIC, sys/mips/conf/OCTEON1, sys/sparc64/conf/GENERIC: Add the mpr(4) driver to all config files that currently have the mps(4) driver. sys/ia64/conf/GENERIC: Add the mps(4) and mpr(4) drivers to the ia64 GENERIC config file. sys/i386/conf/XEN: Exclude the mpr module from building here. Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> Tested by: Chris Reeves <chrisr@spectralogic.com> Sponsored by: LSI, Spectra Logic Relnotes: LSI 12Gb SAS driver mpr(4) added ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265237 | ken | 2014-05-02 14:36:20 -0600 (Fri, 02 May 2014) | 8 lines Add the mpr(4) man page to the man4 Makefile. This should have been included in r265236. Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> MFC after: 3 days Sponsored by: LSI, Spectra Logic ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265241 | brueffer | 2014-05-02 15:14:28 -0600 (Fri, 02 May 2014) | 2 lines Use our standard SYNOPSIS wording; perform some cleanup while here. ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265261 | brueffer | 2014-05-03 05:15:28 -0600 (Sat, 03 May 2014) | 2 lines Add a missing colon. ------------------------------------------------------------------------ Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> Tested by: Chris Reeves <chrisr@spectralogic.com> Sponsored by: LSI, Spectra Logic Relnotes: LSI 12Gb SAS driver mpr(4) added diff 265388 Mon May 05 20:43:36 MDT 2014 ken MFC the mpr(4) driver for LSI's 12Gb SAS cards. This includes r265236, r265237, r265241 and r265261: ------------------------------------------------------------------------ r265236 | ken | 2014-05-02 14:25:09 -0600 (Fri, 02 May 2014) | 51 lines Bring in the mpr(4) driver for LSI's MPT3 12Gb SAS controllers. This is derived from the mps(4) driver, but it supports only the 12Gb IT and IR hardware including the SAS 3004, SAS 3008 and SAS 3108. Some notes about this driver: o The 12Gb hardware can do "FastPath" I/O, and that capability is included in this driver. o WarpDrive functionality has been removed, since it isn't supported in the 12Gb driver interface. o The Scatter/Gather list handling code is significantly different between the 6Gb and 12Gb hardware. The 12Gb boards support IEEE Scatter/Gather lists. Thanks to LSI for developing and testing this driver for FreeBSD. share/man/man4/mpr.4: mpr(4) man page. sys/dev/mpr/*: mpr(4) driver files. sys/modules/Makefile, sys/modules/mpr/Makefile: Add a module Makefile for the mpr(4) driver. sys/conf/files: Add the mpr(4) driver. sys/amd64/conf/GENERIC, sys/i386/conf/GENERIC, sys/mips/conf/OCTEON1, sys/sparc64/conf/GENERIC: Add the mpr(4) driver to all config files that currently have the mps(4) driver. sys/ia64/conf/GENERIC: Add the mps(4) and mpr(4) drivers to the ia64 GENERIC config file. sys/i386/conf/XEN: Exclude the mpr module from building here. Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> Tested by: Chris Reeves <chrisr@spectralogic.com> Sponsored by: LSI, Spectra Logic Relnotes: LSI 12Gb SAS driver mpr(4) added ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265237 | ken | 2014-05-02 14:36:20 -0600 (Fri, 02 May 2014) | 8 lines Add the mpr(4) man page to the man4 Makefile. This should have been included in r265236. Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> MFC after: 3 days Sponsored by: LSI, Spectra Logic ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265241 | brueffer | 2014-05-02 15:14:28 -0600 (Fri, 02 May 2014) | 2 lines Use our standard SYNOPSIS wording; perform some cleanup while here. ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265261 | brueffer | 2014-05-03 05:15:28 -0600 (Sat, 03 May 2014) | 2 lines Add a missing colon. ------------------------------------------------------------------------ Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> Tested by: Chris Reeves <chrisr@spectralogic.com> Sponsored by: LSI, Spectra Logic Relnotes: LSI 12Gb SAS driver mpr(4) added diff 265388 Mon May 05 20:43:36 MDT 2014 ken MFC the mpr(4) driver for LSI's 12Gb SAS cards. This includes r265236, r265237, r265241 and r265261: ------------------------------------------------------------------------ r265236 | ken | 2014-05-02 14:25:09 -0600 (Fri, 02 May 2014) | 51 lines Bring in the mpr(4) driver for LSI's MPT3 12Gb SAS controllers. This is derived from the mps(4) driver, but it supports only the 12Gb IT and IR hardware including the SAS 3004, SAS 3008 and SAS 3108. Some notes about this driver: o The 12Gb hardware can do "FastPath" I/O, and that capability is included in this driver. o WarpDrive functionality has been removed, since it isn't supported in the 12Gb driver interface. o The Scatter/Gather list handling code is significantly different between the 6Gb and 12Gb hardware. The 12Gb boards support IEEE Scatter/Gather lists. Thanks to LSI for developing and testing this driver for FreeBSD. share/man/man4/mpr.4: mpr(4) man page. sys/dev/mpr/*: mpr(4) driver files. sys/modules/Makefile, sys/modules/mpr/Makefile: Add a module Makefile for the mpr(4) driver. sys/conf/files: Add the mpr(4) driver. sys/amd64/conf/GENERIC, sys/i386/conf/GENERIC, sys/mips/conf/OCTEON1, sys/sparc64/conf/GENERIC: Add the mpr(4) driver to all config files that currently have the mps(4) driver. sys/ia64/conf/GENERIC: Add the mps(4) and mpr(4) drivers to the ia64 GENERIC config file. sys/i386/conf/XEN: Exclude the mpr module from building here. Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> Tested by: Chris Reeves <chrisr@spectralogic.com> Sponsored by: LSI, Spectra Logic Relnotes: LSI 12Gb SAS driver mpr(4) added ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265237 | ken | 2014-05-02 14:36:20 -0600 (Fri, 02 May 2014) | 8 lines Add the mpr(4) man page to the man4 Makefile. This should have been included in r265236. Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> MFC after: 3 days Sponsored by: LSI, Spectra Logic ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265241 | brueffer | 2014-05-02 15:14:28 -0600 (Fri, 02 May 2014) | 2 lines Use our standard SYNOPSIS wording; perform some cleanup while here. ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265261 | brueffer | 2014-05-03 05:15:28 -0600 (Sat, 03 May 2014) | 2 lines Add a missing colon. ------------------------------------------------------------------------ Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> Tested by: Chris Reeves <chrisr@spectralogic.com> Sponsored by: LSI, Spectra Logic Relnotes: LSI 12Gb SAS driver mpr(4) added diff 265388 Mon May 05 20:43:36 MDT 2014 ken MFC the mpr(4) driver for LSI's 12Gb SAS cards. This includes r265236, r265237, r265241 and r265261: ------------------------------------------------------------------------ r265236 | ken | 2014-05-02 14:25:09 -0600 (Fri, 02 May 2014) | 51 lines Bring in the mpr(4) driver for LSI's MPT3 12Gb SAS controllers. This is derived from the mps(4) driver, but it supports only the 12Gb IT and IR hardware including the SAS 3004, SAS 3008 and SAS 3108. Some notes about this driver: o The 12Gb hardware can do "FastPath" I/O, and that capability is included in this driver. o WarpDrive functionality has been removed, since it isn't supported in the 12Gb driver interface. o The Scatter/Gather list handling code is significantly different between the 6Gb and 12Gb hardware. The 12Gb boards support IEEE Scatter/Gather lists. Thanks to LSI for developing and testing this driver for FreeBSD. share/man/man4/mpr.4: mpr(4) man page. sys/dev/mpr/*: mpr(4) driver files. sys/modules/Makefile, sys/modules/mpr/Makefile: Add a module Makefile for the mpr(4) driver. sys/conf/files: Add the mpr(4) driver. sys/amd64/conf/GENERIC, sys/i386/conf/GENERIC, sys/mips/conf/OCTEON1, sys/sparc64/conf/GENERIC: Add the mpr(4) driver to all config files that currently have the mps(4) driver. sys/ia64/conf/GENERIC: Add the mps(4) and mpr(4) drivers to the ia64 GENERIC config file. sys/i386/conf/XEN: Exclude the mpr module from building here. Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> Tested by: Chris Reeves <chrisr@spectralogic.com> Sponsored by: LSI, Spectra Logic Relnotes: LSI 12Gb SAS driver mpr(4) added ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265237 | ken | 2014-05-02 14:36:20 -0600 (Fri, 02 May 2014) | 8 lines Add the mpr(4) man page to the man4 Makefile. This should have been included in r265236. Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> MFC after: 3 days Sponsored by: LSI, Spectra Logic ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265241 | brueffer | 2014-05-02 15:14:28 -0600 (Fri, 02 May 2014) | 2 lines Use our standard SYNOPSIS wording; perform some cleanup while here. ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265261 | brueffer | 2014-05-03 05:15:28 -0600 (Sat, 03 May 2014) | 2 lines Add a missing colon. ------------------------------------------------------------------------ Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> Tested by: Chris Reeves <chrisr@spectralogic.com> Sponsored by: LSI, Spectra Logic Relnotes: LSI 12Gb SAS driver mpr(4) added diff 265388 Mon May 05 20:43:36 MDT 2014 ken MFC the mpr(4) driver for LSI's 12Gb SAS cards. This includes r265236, r265237, r265241 and r265261: ------------------------------------------------------------------------ r265236 | ken | 2014-05-02 14:25:09 -0600 (Fri, 02 May 2014) | 51 lines Bring in the mpr(4) driver for LSI's MPT3 12Gb SAS controllers. This is derived from the mps(4) driver, but it supports only the 12Gb IT and IR hardware including the SAS 3004, SAS 3008 and SAS 3108. Some notes about this driver: o The 12Gb hardware can do "FastPath" I/O, and that capability is included in this driver. o WarpDrive functionality has been removed, since it isn't supported in the 12Gb driver interface. o The Scatter/Gather list handling code is significantly different between the 6Gb and 12Gb hardware. The 12Gb boards support IEEE Scatter/Gather lists. Thanks to LSI for developing and testing this driver for FreeBSD. share/man/man4/mpr.4: mpr(4) man page. sys/dev/mpr/*: mpr(4) driver files. sys/modules/Makefile, sys/modules/mpr/Makefile: Add a module Makefile for the mpr(4) driver. sys/conf/files: Add the mpr(4) driver. sys/amd64/conf/GENERIC, sys/i386/conf/GENERIC, sys/mips/conf/OCTEON1, sys/sparc64/conf/GENERIC: Add the mpr(4) driver to all config files that currently have the mps(4) driver. sys/ia64/conf/GENERIC: Add the mps(4) and mpr(4) drivers to the ia64 GENERIC config file. sys/i386/conf/XEN: Exclude the mpr module from building here. Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> Tested by: Chris Reeves <chrisr@spectralogic.com> Sponsored by: LSI, Spectra Logic Relnotes: LSI 12Gb SAS driver mpr(4) added ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265237 | ken | 2014-05-02 14:36:20 -0600 (Fri, 02 May 2014) | 8 lines Add the mpr(4) man page to the man4 Makefile. This should have been included in r265236. Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> MFC after: 3 days Sponsored by: LSI, Spectra Logic ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265241 | brueffer | 2014-05-02 15:14:28 -0600 (Fri, 02 May 2014) | 2 lines Use our standard SYNOPSIS wording; perform some cleanup while here. ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265261 | brueffer | 2014-05-03 05:15:28 -0600 (Sat, 03 May 2014) | 2 lines Add a missing colon. ------------------------------------------------------------------------ Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> Tested by: Chris Reeves <chrisr@spectralogic.com> Sponsored by: LSI, Spectra Logic Relnotes: LSI 12Gb SAS driver mpr(4) added diff 265388 Mon May 05 20:43:36 MDT 2014 ken MFC the mpr(4) driver for LSI's 12Gb SAS cards. This includes r265236, r265237, r265241 and r265261: ------------------------------------------------------------------------ r265236 | ken | 2014-05-02 14:25:09 -0600 (Fri, 02 May 2014) | 51 lines Bring in the mpr(4) driver for LSI's MPT3 12Gb SAS controllers. This is derived from the mps(4) driver, but it supports only the 12Gb IT and IR hardware including the SAS 3004, SAS 3008 and SAS 3108. Some notes about this driver: o The 12Gb hardware can do "FastPath" I/O, and that capability is included in this driver. o WarpDrive functionality has been removed, since it isn't supported in the 12Gb driver interface. o The Scatter/Gather list handling code is significantly different between the 6Gb and 12Gb hardware. The 12Gb boards support IEEE Scatter/Gather lists. Thanks to LSI for developing and testing this driver for FreeBSD. share/man/man4/mpr.4: mpr(4) man page. sys/dev/mpr/*: mpr(4) driver files. sys/modules/Makefile, sys/modules/mpr/Makefile: Add a module Makefile for the mpr(4) driver. sys/conf/files: Add the mpr(4) driver. sys/amd64/conf/GENERIC, sys/i386/conf/GENERIC, sys/mips/conf/OCTEON1, sys/sparc64/conf/GENERIC: Add the mpr(4) driver to all config files that currently have the mps(4) driver. sys/ia64/conf/GENERIC: Add the mps(4) and mpr(4) drivers to the ia64 GENERIC config file. sys/i386/conf/XEN: Exclude the mpr module from building here. Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> Tested by: Chris Reeves <chrisr@spectralogic.com> Sponsored by: LSI, Spectra Logic Relnotes: LSI 12Gb SAS driver mpr(4) added ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265237 | ken | 2014-05-02 14:36:20 -0600 (Fri, 02 May 2014) | 8 lines Add the mpr(4) man page to the man4 Makefile. This should have been included in r265236. Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> MFC after: 3 days Sponsored by: LSI, Spectra Logic ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265241 | brueffer | 2014-05-02 15:14:28 -0600 (Fri, 02 May 2014) | 2 lines Use our standard SYNOPSIS wording; perform some cleanup while here. ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265261 | brueffer | 2014-05-03 05:15:28 -0600 (Sat, 03 May 2014) | 2 lines Add a missing colon. ------------------------------------------------------------------------ Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> Tested by: Chris Reeves <chrisr@spectralogic.com> Sponsored by: LSI, Spectra Logic Relnotes: LSI 12Gb SAS driver mpr(4) added diff 265388 Mon May 05 20:43:36 MDT 2014 ken MFC the mpr(4) driver for LSI's 12Gb SAS cards. This includes r265236, r265237, r265241 and r265261: ------------------------------------------------------------------------ r265236 | ken | 2014-05-02 14:25:09 -0600 (Fri, 02 May 2014) | 51 lines Bring in the mpr(4) driver for LSI's MPT3 12Gb SAS controllers. This is derived from the mps(4) driver, but it supports only the 12Gb IT and IR hardware including the SAS 3004, SAS 3008 and SAS 3108. Some notes about this driver: o The 12Gb hardware can do "FastPath" I/O, and that capability is included in this driver. o WarpDrive functionality has been removed, since it isn't supported in the 12Gb driver interface. o The Scatter/Gather list handling code is significantly different between the 6Gb and 12Gb hardware. The 12Gb boards support IEEE Scatter/Gather lists. Thanks to LSI for developing and testing this driver for FreeBSD. share/man/man4/mpr.4: mpr(4) man page. sys/dev/mpr/*: mpr(4) driver files. sys/modules/Makefile, sys/modules/mpr/Makefile: Add a module Makefile for the mpr(4) driver. sys/conf/files: Add the mpr(4) driver. sys/amd64/conf/GENERIC, sys/i386/conf/GENERIC, sys/mips/conf/OCTEON1, sys/sparc64/conf/GENERIC: Add the mpr(4) driver to all config files that currently have the mps(4) driver. sys/ia64/conf/GENERIC: Add the mps(4) and mpr(4) drivers to the ia64 GENERIC config file. sys/i386/conf/XEN: Exclude the mpr module from building here. Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> Tested by: Chris Reeves <chrisr@spectralogic.com> Sponsored by: LSI, Spectra Logic Relnotes: LSI 12Gb SAS driver mpr(4) added ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265237 | ken | 2014-05-02 14:36:20 -0600 (Fri, 02 May 2014) | 8 lines Add the mpr(4) man page to the man4 Makefile. This should have been included in r265236. Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> MFC after: 3 days Sponsored by: LSI, Spectra Logic ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265241 | brueffer | 2014-05-02 15:14:28 -0600 (Fri, 02 May 2014) | 2 lines Use our standard SYNOPSIS wording; perform some cleanup while here. ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265261 | brueffer | 2014-05-03 05:15:28 -0600 (Sat, 03 May 2014) | 2 lines Add a missing colon. ------------------------------------------------------------------------ Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> Tested by: Chris Reeves <chrisr@spectralogic.com> Sponsored by: LSI, Spectra Logic Relnotes: LSI 12Gb SAS driver mpr(4) added diff 265388 Mon May 05 20:43:36 MDT 2014 ken MFC the mpr(4) driver for LSI's 12Gb SAS cards. This includes r265236, r265237, r265241 and r265261: ------------------------------------------------------------------------ r265236 | ken | 2014-05-02 14:25:09 -0600 (Fri, 02 May 2014) | 51 lines Bring in the mpr(4) driver for LSI's MPT3 12Gb SAS controllers. This is derived from the mps(4) driver, but it supports only the 12Gb IT and IR hardware including the SAS 3004, SAS 3008 and SAS 3108. Some notes about this driver: o The 12Gb hardware can do "FastPath" I/O, and that capability is included in this driver. o WarpDrive functionality has been removed, since it isn't supported in the 12Gb driver interface. o The Scatter/Gather list handling code is significantly different between the 6Gb and 12Gb hardware. The 12Gb boards support IEEE Scatter/Gather lists. Thanks to LSI for developing and testing this driver for FreeBSD. share/man/man4/mpr.4: mpr(4) man page. sys/dev/mpr/*: mpr(4) driver files. sys/modules/Makefile, sys/modules/mpr/Makefile: Add a module Makefile for the mpr(4) driver. sys/conf/files: Add the mpr(4) driver. sys/amd64/conf/GENERIC, sys/i386/conf/GENERIC, sys/mips/conf/OCTEON1, sys/sparc64/conf/GENERIC: Add the mpr(4) driver to all config files that currently have the mps(4) driver. sys/ia64/conf/GENERIC: Add the mps(4) and mpr(4) drivers to the ia64 GENERIC config file. sys/i386/conf/XEN: Exclude the mpr module from building here. Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> Tested by: Chris Reeves <chrisr@spectralogic.com> Sponsored by: LSI, Spectra Logic Relnotes: LSI 12Gb SAS driver mpr(4) added ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265237 | ken | 2014-05-02 14:36:20 -0600 (Fri, 02 May 2014) | 8 lines Add the mpr(4) man page to the man4 Makefile. This should have been included in r265236. Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> MFC after: 3 days Sponsored by: LSI, Spectra Logic ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265241 | brueffer | 2014-05-02 15:14:28 -0600 (Fri, 02 May 2014) | 2 lines Use our standard SYNOPSIS wording; perform some cleanup while here. ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265261 | brueffer | 2014-05-03 05:15:28 -0600 (Sat, 03 May 2014) | 2 lines Add a missing colon. ------------------------------------------------------------------------ Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> Tested by: Chris Reeves <chrisr@spectralogic.com> Sponsored by: LSI, Spectra Logic Relnotes: LSI 12Gb SAS driver mpr(4) added diff 265388 Mon May 05 20:43:36 MDT 2014 ken MFC the mpr(4) driver for LSI's 12Gb SAS cards. This includes r265236, r265237, r265241 and r265261: ------------------------------------------------------------------------ r265236 | ken | 2014-05-02 14:25:09 -0600 (Fri, 02 May 2014) | 51 lines Bring in the mpr(4) driver for LSI's MPT3 12Gb SAS controllers. This is derived from the mps(4) driver, but it supports only the 12Gb IT and IR hardware including the SAS 3004, SAS 3008 and SAS 3108. Some notes about this driver: o The 12Gb hardware can do "FastPath" I/O, and that capability is included in this driver. o WarpDrive functionality has been removed, since it isn't supported in the 12Gb driver interface. o The Scatter/Gather list handling code is significantly different between the 6Gb and 12Gb hardware. The 12Gb boards support IEEE Scatter/Gather lists. Thanks to LSI for developing and testing this driver for FreeBSD. share/man/man4/mpr.4: mpr(4) man page. sys/dev/mpr/*: mpr(4) driver files. sys/modules/Makefile, sys/modules/mpr/Makefile: Add a module Makefile for the mpr(4) driver. sys/conf/files: Add the mpr(4) driver. sys/amd64/conf/GENERIC, sys/i386/conf/GENERIC, sys/mips/conf/OCTEON1, sys/sparc64/conf/GENERIC: Add the mpr(4) driver to all config files that currently have the mps(4) driver. sys/ia64/conf/GENERIC: Add the mps(4) and mpr(4) drivers to the ia64 GENERIC config file. sys/i386/conf/XEN: Exclude the mpr module from building here. Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> Tested by: Chris Reeves <chrisr@spectralogic.com> Sponsored by: LSI, Spectra Logic Relnotes: LSI 12Gb SAS driver mpr(4) added ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265237 | ken | 2014-05-02 14:36:20 -0600 (Fri, 02 May 2014) | 8 lines Add the mpr(4) man page to the man4 Makefile. This should have been included in r265236. Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> MFC after: 3 days Sponsored by: LSI, Spectra Logic ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265241 | brueffer | 2014-05-02 15:14:28 -0600 (Fri, 02 May 2014) | 2 lines Use our standard SYNOPSIS wording; perform some cleanup while here. ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265261 | brueffer | 2014-05-03 05:15:28 -0600 (Sat, 03 May 2014) | 2 lines Add a missing colon. ------------------------------------------------------------------------ Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> Tested by: Chris Reeves <chrisr@spectralogic.com> Sponsored by: LSI, Spectra Logic Relnotes: LSI 12Gb SAS driver mpr(4) added diff 265388 Mon May 05 20:43:36 MDT 2014 ken MFC the mpr(4) driver for LSI's 12Gb SAS cards. This includes r265236, r265237, r265241 and r265261: ------------------------------------------------------------------------ r265236 | ken | 2014-05-02 14:25:09 -0600 (Fri, 02 May 2014) | 51 lines Bring in the mpr(4) driver for LSI's MPT3 12Gb SAS controllers. This is derived from the mps(4) driver, but it supports only the 12Gb IT and IR hardware including the SAS 3004, SAS 3008 and SAS 3108. Some notes about this driver: o The 12Gb hardware can do "FastPath" I/O, and that capability is included in this driver. o WarpDrive functionality has been removed, since it isn't supported in the 12Gb driver interface. o The Scatter/Gather list handling code is significantly different between the 6Gb and 12Gb hardware. The 12Gb boards support IEEE Scatter/Gather lists. Thanks to LSI for developing and testing this driver for FreeBSD. share/man/man4/mpr.4: mpr(4) man page. sys/dev/mpr/*: mpr(4) driver files. sys/modules/Makefile, sys/modules/mpr/Makefile: Add a module Makefile for the mpr(4) driver. sys/conf/files: Add the mpr(4) driver. sys/amd64/conf/GENERIC, sys/i386/conf/GENERIC, sys/mips/conf/OCTEON1, sys/sparc64/conf/GENERIC: Add the mpr(4) driver to all config files that currently have the mps(4) driver. sys/ia64/conf/GENERIC: Add the mps(4) and mpr(4) drivers to the ia64 GENERIC config file. sys/i386/conf/XEN: Exclude the mpr module from building here. Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> Tested by: Chris Reeves <chrisr@spectralogic.com> Sponsored by: LSI, Spectra Logic Relnotes: LSI 12Gb SAS driver mpr(4) added ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265237 | ken | 2014-05-02 14:36:20 -0600 (Fri, 02 May 2014) | 8 lines Add the mpr(4) man page to the man4 Makefile. This should have been included in r265236. Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> MFC after: 3 days Sponsored by: LSI, Spectra Logic ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265241 | brueffer | 2014-05-02 15:14:28 -0600 (Fri, 02 May 2014) | 2 lines Use our standard SYNOPSIS wording; perform some cleanup while here. ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265261 | brueffer | 2014-05-03 05:15:28 -0600 (Sat, 03 May 2014) | 2 lines Add a missing colon. ------------------------------------------------------------------------ Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> Tested by: Chris Reeves <chrisr@spectralogic.com> Sponsored by: LSI, Spectra Logic Relnotes: LSI 12Gb SAS driver mpr(4) added diff 265388 Mon May 05 20:43:36 MDT 2014 ken MFC the mpr(4) driver for LSI's 12Gb SAS cards. This includes r265236, r265237, r265241 and r265261: ------------------------------------------------------------------------ r265236 | ken | 2014-05-02 14:25:09 -0600 (Fri, 02 May 2014) | 51 lines Bring in the mpr(4) driver for LSI's MPT3 12Gb SAS controllers. This is derived from the mps(4) driver, but it supports only the 12Gb IT and IR hardware including the SAS 3004, SAS 3008 and SAS 3108. Some notes about this driver: o The 12Gb hardware can do "FastPath" I/O, and that capability is included in this driver. o WarpDrive functionality has been removed, since it isn't supported in the 12Gb driver interface. o The Scatter/Gather list handling code is significantly different between the 6Gb and 12Gb hardware. The 12Gb boards support IEEE Scatter/Gather lists. Thanks to LSI for developing and testing this driver for FreeBSD. share/man/man4/mpr.4: mpr(4) man page. sys/dev/mpr/*: mpr(4) driver files. sys/modules/Makefile, sys/modules/mpr/Makefile: Add a module Makefile for the mpr(4) driver. sys/conf/files: Add the mpr(4) driver. sys/amd64/conf/GENERIC, sys/i386/conf/GENERIC, sys/mips/conf/OCTEON1, sys/sparc64/conf/GENERIC: Add the mpr(4) driver to all config files that currently have the mps(4) driver. sys/ia64/conf/GENERIC: Add the mps(4) and mpr(4) drivers to the ia64 GENERIC config file. sys/i386/conf/XEN: Exclude the mpr module from building here. Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> Tested by: Chris Reeves <chrisr@spectralogic.com> Sponsored by: LSI, Spectra Logic Relnotes: LSI 12Gb SAS driver mpr(4) added ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265237 | ken | 2014-05-02 14:36:20 -0600 (Fri, 02 May 2014) | 8 lines Add the mpr(4) man page to the man4 Makefile. This should have been included in r265236. Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> MFC after: 3 days Sponsored by: LSI, Spectra Logic ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265241 | brueffer | 2014-05-02 15:14:28 -0600 (Fri, 02 May 2014) | 2 lines Use our standard SYNOPSIS wording; perform some cleanup while here. ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265261 | brueffer | 2014-05-03 05:15:28 -0600 (Sat, 03 May 2014) | 2 lines Add a missing colon. ------------------------------------------------------------------------ Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> Tested by: Chris Reeves <chrisr@spectralogic.com> Sponsored by: LSI, Spectra Logic Relnotes: LSI 12Gb SAS driver mpr(4) added diff 265388 Mon May 05 20:43:36 MDT 2014 ken MFC the mpr(4) driver for LSI's 12Gb SAS cards. This includes r265236, r265237, r265241 and r265261: ------------------------------------------------------------------------ r265236 | ken | 2014-05-02 14:25:09 -0600 (Fri, 02 May 2014) | 51 lines Bring in the mpr(4) driver for LSI's MPT3 12Gb SAS controllers. This is derived from the mps(4) driver, but it supports only the 12Gb IT and IR hardware including the SAS 3004, SAS 3008 and SAS 3108. Some notes about this driver: o The 12Gb hardware can do "FastPath" I/O, and that capability is included in this driver. o WarpDrive functionality has been removed, since it isn't supported in the 12Gb driver interface. o The Scatter/Gather list handling code is significantly different between the 6Gb and 12Gb hardware. The 12Gb boards support IEEE Scatter/Gather lists. Thanks to LSI for developing and testing this driver for FreeBSD. share/man/man4/mpr.4: mpr(4) man page. sys/dev/mpr/*: mpr(4) driver files. sys/modules/Makefile, sys/modules/mpr/Makefile: Add a module Makefile for the mpr(4) driver. sys/conf/files: Add the mpr(4) driver. sys/amd64/conf/GENERIC, sys/i386/conf/GENERIC, sys/mips/conf/OCTEON1, sys/sparc64/conf/GENERIC: Add the mpr(4) driver to all config files that currently have the mps(4) driver. sys/ia64/conf/GENERIC: Add the mps(4) and mpr(4) drivers to the ia64 GENERIC config file. sys/i386/conf/XEN: Exclude the mpr module from building here. Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> Tested by: Chris Reeves <chrisr@spectralogic.com> Sponsored by: LSI, Spectra Logic Relnotes: LSI 12Gb SAS driver mpr(4) added ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265237 | ken | 2014-05-02 14:36:20 -0600 (Fri, 02 May 2014) | 8 lines Add the mpr(4) man page to the man4 Makefile. This should have been included in r265236. Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> MFC after: 3 days Sponsored by: LSI, Spectra Logic ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265241 | brueffer | 2014-05-02 15:14:28 -0600 (Fri, 02 May 2014) | 2 lines Use our standard SYNOPSIS wording; perform some cleanup while here. ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265261 | brueffer | 2014-05-03 05:15:28 -0600 (Sat, 03 May 2014) | 2 lines Add a missing colon. ------------------------------------------------------------------------ Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> Tested by: Chris Reeves <chrisr@spectralogic.com> Sponsored by: LSI, Spectra Logic Relnotes: LSI 12Gb SAS driver mpr(4) added diff 265388 Mon May 05 20:43:36 MDT 2014 ken MFC the mpr(4) driver for LSI's 12Gb SAS cards. This includes r265236, r265237, r265241 and r265261: ------------------------------------------------------------------------ r265236 | ken | 2014-05-02 14:25:09 -0600 (Fri, 02 May 2014) | 51 lines Bring in the mpr(4) driver for LSI's MPT3 12Gb SAS controllers. This is derived from the mps(4) driver, but it supports only the 12Gb IT and IR hardware including the SAS 3004, SAS 3008 and SAS 3108. Some notes about this driver: o The 12Gb hardware can do "FastPath" I/O, and that capability is included in this driver. o WarpDrive functionality has been removed, since it isn't supported in the 12Gb driver interface. o The Scatter/Gather list handling code is significantly different between the 6Gb and 12Gb hardware. The 12Gb boards support IEEE Scatter/Gather lists. Thanks to LSI for developing and testing this driver for FreeBSD. share/man/man4/mpr.4: mpr(4) man page. sys/dev/mpr/*: mpr(4) driver files. sys/modules/Makefile, sys/modules/mpr/Makefile: Add a module Makefile for the mpr(4) driver. sys/conf/files: Add the mpr(4) driver. sys/amd64/conf/GENERIC, sys/i386/conf/GENERIC, sys/mips/conf/OCTEON1, sys/sparc64/conf/GENERIC: Add the mpr(4) driver to all config files that currently have the mps(4) driver. sys/ia64/conf/GENERIC: Add the mps(4) and mpr(4) drivers to the ia64 GENERIC config file. sys/i386/conf/XEN: Exclude the mpr module from building here. Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> Tested by: Chris Reeves <chrisr@spectralogic.com> Sponsored by: LSI, Spectra Logic Relnotes: LSI 12Gb SAS driver mpr(4) added ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265237 | ken | 2014-05-02 14:36:20 -0600 (Fri, 02 May 2014) | 8 lines Add the mpr(4) man page to the man4 Makefile. This should have been included in r265236. Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> MFC after: 3 days Sponsored by: LSI, Spectra Logic ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265241 | brueffer | 2014-05-02 15:14:28 -0600 (Fri, 02 May 2014) | 2 lines Use our standard SYNOPSIS wording; perform some cleanup while here. ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265261 | brueffer | 2014-05-03 05:15:28 -0600 (Sat, 03 May 2014) | 2 lines Add a missing colon. ------------------------------------------------------------------------ Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> Tested by: Chris Reeves <chrisr@spectralogic.com> Sponsored by: LSI, Spectra Logic Relnotes: LSI 12Gb SAS driver mpr(4) added diff 265388 Mon May 05 20:43:36 MDT 2014 ken MFC the mpr(4) driver for LSI's 12Gb SAS cards. This includes r265236, r265237, r265241 and r265261: ------------------------------------------------------------------------ r265236 | ken | 2014-05-02 14:25:09 -0600 (Fri, 02 May 2014) | 51 lines Bring in the mpr(4) driver for LSI's MPT3 12Gb SAS controllers. This is derived from the mps(4) driver, but it supports only the 12Gb IT and IR hardware including the SAS 3004, SAS 3008 and SAS 3108. Some notes about this driver: o The 12Gb hardware can do "FastPath" I/O, and that capability is included in this driver. o WarpDrive functionality has been removed, since it isn't supported in the 12Gb driver interface. o The Scatter/Gather list handling code is significantly different between the 6Gb and 12Gb hardware. The 12Gb boards support IEEE Scatter/Gather lists. Thanks to LSI for developing and testing this driver for FreeBSD. share/man/man4/mpr.4: mpr(4) man page. sys/dev/mpr/*: mpr(4) driver files. sys/modules/Makefile, sys/modules/mpr/Makefile: Add a module Makefile for the mpr(4) driver. sys/conf/files: Add the mpr(4) driver. sys/amd64/conf/GENERIC, sys/i386/conf/GENERIC, sys/mips/conf/OCTEON1, sys/sparc64/conf/GENERIC: Add the mpr(4) driver to all config files that currently have the mps(4) driver. sys/ia64/conf/GENERIC: Add the mps(4) and mpr(4) drivers to the ia64 GENERIC config file. sys/i386/conf/XEN: Exclude the mpr module from building here. Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> Tested by: Chris Reeves <chrisr@spectralogic.com> Sponsored by: LSI, Spectra Logic Relnotes: LSI 12Gb SAS driver mpr(4) added ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265237 | ken | 2014-05-02 14:36:20 -0600 (Fri, 02 May 2014) | 8 lines Add the mpr(4) man page to the man4 Makefile. This should have been included in r265236. Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> MFC after: 3 days Sponsored by: LSI, Spectra Logic ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265241 | brueffer | 2014-05-02 15:14:28 -0600 (Fri, 02 May 2014) | 2 lines Use our standard SYNOPSIS wording; perform some cleanup while here. ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265261 | brueffer | 2014-05-03 05:15:28 -0600 (Sat, 03 May 2014) | 2 lines Add a missing colon. ------------------------------------------------------------------------ Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> Tested by: Chris Reeves <chrisr@spectralogic.com> Sponsored by: LSI, Spectra Logic Relnotes: LSI 12Gb SAS driver mpr(4) added diff 265388 Mon May 05 20:43:36 MDT 2014 ken MFC the mpr(4) driver for LSI's 12Gb SAS cards. This includes r265236, r265237, r265241 and r265261: ------------------------------------------------------------------------ r265236 | ken | 2014-05-02 14:25:09 -0600 (Fri, 02 May 2014) | 51 lines Bring in the mpr(4) driver for LSI's MPT3 12Gb SAS controllers. This is derived from the mps(4) driver, but it supports only the 12Gb IT and IR hardware including the SAS 3004, SAS 3008 and SAS 3108. Some notes about this driver: o The 12Gb hardware can do "FastPath" I/O, and that capability is included in this driver. o WarpDrive functionality has been removed, since it isn't supported in the 12Gb driver interface. o The Scatter/Gather list handling code is significantly different between the 6Gb and 12Gb hardware. The 12Gb boards support IEEE Scatter/Gather lists. Thanks to LSI for developing and testing this driver for FreeBSD. share/man/man4/mpr.4: mpr(4) man page. sys/dev/mpr/*: mpr(4) driver files. sys/modules/Makefile, sys/modules/mpr/Makefile: Add a module Makefile for the mpr(4) driver. sys/conf/files: Add the mpr(4) driver. sys/amd64/conf/GENERIC, sys/i386/conf/GENERIC, sys/mips/conf/OCTEON1, sys/sparc64/conf/GENERIC: Add the mpr(4) driver to all config files that currently have the mps(4) driver. sys/ia64/conf/GENERIC: Add the mps(4) and mpr(4) drivers to the ia64 GENERIC config file. sys/i386/conf/XEN: Exclude the mpr module from building here. Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> Tested by: Chris Reeves <chrisr@spectralogic.com> Sponsored by: LSI, Spectra Logic Relnotes: LSI 12Gb SAS driver mpr(4) added ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265237 | ken | 2014-05-02 14:36:20 -0600 (Fri, 02 May 2014) | 8 lines Add the mpr(4) man page to the man4 Makefile. This should have been included in r265236. Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> MFC after: 3 days Sponsored by: LSI, Spectra Logic ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265241 | brueffer | 2014-05-02 15:14:28 -0600 (Fri, 02 May 2014) | 2 lines Use our standard SYNOPSIS wording; perform some cleanup while here. ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265261 | brueffer | 2014-05-03 05:15:28 -0600 (Sat, 03 May 2014) | 2 lines Add a missing colon. ------------------------------------------------------------------------ Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> Tested by: Chris Reeves <chrisr@spectralogic.com> Sponsored by: LSI, Spectra Logic Relnotes: LSI 12Gb SAS driver mpr(4) added |
| H A D | mpr_ioctl.h | diff 265388 Mon May 05 20:43:36 MDT 2014 ken MFC the mpr(4) driver for LSI's 12Gb SAS cards. This includes r265236, r265237, r265241 and r265261: ------------------------------------------------------------------------ r265236 | ken | 2014-05-02 14:25:09 -0600 (Fri, 02 May 2014) | 51 lines Bring in the mpr(4) driver for LSI's MPT3 12Gb SAS controllers. This is derived from the mps(4) driver, but it supports only the 12Gb IT and IR hardware including the SAS 3004, SAS 3008 and SAS 3108. Some notes about this driver: o The 12Gb hardware can do "FastPath" I/O, and that capability is included in this driver. o WarpDrive functionality has been removed, since it isn't supported in the 12Gb driver interface. o The Scatter/Gather list handling code is significantly different between the 6Gb and 12Gb hardware. The 12Gb boards support IEEE Scatter/Gather lists. Thanks to LSI for developing and testing this driver for FreeBSD. share/man/man4/mpr.4: mpr(4) man page. sys/dev/mpr/*: mpr(4) driver files. sys/modules/Makefile, sys/modules/mpr/Makefile: Add a module Makefile for the mpr(4) driver. sys/conf/files: Add the mpr(4) driver. sys/amd64/conf/GENERIC, sys/i386/conf/GENERIC, sys/mips/conf/OCTEON1, sys/sparc64/conf/GENERIC: Add the mpr(4) driver to all config files that currently have the mps(4) driver. sys/ia64/conf/GENERIC: Add the mps(4) and mpr(4) drivers to the ia64 GENERIC config file. sys/i386/conf/XEN: Exclude the mpr module from building here. Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> Tested by: Chris Reeves <chrisr@spectralogic.com> Sponsored by: LSI, Spectra Logic Relnotes: LSI 12Gb SAS driver mpr(4) added ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265237 | ken | 2014-05-02 14:36:20 -0600 (Fri, 02 May 2014) | 8 lines Add the mpr(4) man page to the man4 Makefile. This should have been included in r265236. Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> MFC after: 3 days Sponsored by: LSI, Spectra Logic ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265241 | brueffer | 2014-05-02 15:14:28 -0600 (Fri, 02 May 2014) | 2 lines Use our standard SYNOPSIS wording; perform some cleanup while here. ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265261 | brueffer | 2014-05-03 05:15:28 -0600 (Sat, 03 May 2014) | 2 lines Add a missing colon. ------------------------------------------------------------------------ Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> Tested by: Chris Reeves <chrisr@spectralogic.com> Sponsored by: LSI, Spectra Logic Relnotes: LSI 12Gb SAS driver mpr(4) added diff 265388 Mon May 05 20:43:36 MDT 2014 ken MFC the mpr(4) driver for LSI's 12Gb SAS cards. This includes r265236, r265237, r265241 and r265261: ------------------------------------------------------------------------ r265236 | ken | 2014-05-02 14:25:09 -0600 (Fri, 02 May 2014) | 51 lines Bring in the mpr(4) driver for LSI's MPT3 12Gb SAS controllers. This is derived from the mps(4) driver, but it supports only the 12Gb IT and IR hardware including the SAS 3004, SAS 3008 and SAS 3108. Some notes about this driver: o The 12Gb hardware can do "FastPath" I/O, and that capability is included in this driver. o WarpDrive functionality has been removed, since it isn't supported in the 12Gb driver interface. o The Scatter/Gather list handling code is significantly different between the 6Gb and 12Gb hardware. The 12Gb boards support IEEE Scatter/Gather lists. Thanks to LSI for developing and testing this driver for FreeBSD. share/man/man4/mpr.4: mpr(4) man page. sys/dev/mpr/*: mpr(4) driver files. sys/modules/Makefile, sys/modules/mpr/Makefile: Add a module Makefile for the mpr(4) driver. sys/conf/files: Add the mpr(4) driver. sys/amd64/conf/GENERIC, sys/i386/conf/GENERIC, sys/mips/conf/OCTEON1, sys/sparc64/conf/GENERIC: Add the mpr(4) driver to all config files that currently have the mps(4) driver. sys/ia64/conf/GENERIC: Add the mps(4) and mpr(4) drivers to the ia64 GENERIC config file. sys/i386/conf/XEN: Exclude the mpr module from building here. Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> Tested by: Chris Reeves <chrisr@spectralogic.com> Sponsored by: LSI, Spectra Logic Relnotes: LSI 12Gb SAS driver mpr(4) added ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265237 | ken | 2014-05-02 14:36:20 -0600 (Fri, 02 May 2014) | 8 lines Add the mpr(4) man page to the man4 Makefile. This should have been included in r265236. Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> MFC after: 3 days Sponsored by: LSI, Spectra Logic ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265241 | brueffer | 2014-05-02 15:14:28 -0600 (Fri, 02 May 2014) | 2 lines Use our standard SYNOPSIS wording; perform some cleanup while here. ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265261 | brueffer | 2014-05-03 05:15:28 -0600 (Sat, 03 May 2014) | 2 lines Add a missing colon. ------------------------------------------------------------------------ Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> Tested by: Chris Reeves <chrisr@spectralogic.com> Sponsored by: LSI, Spectra Logic Relnotes: LSI 12Gb SAS driver mpr(4) added diff 265388 Mon May 05 20:43:36 MDT 2014 ken MFC the mpr(4) driver for LSI's 12Gb SAS cards. This includes r265236, r265237, r265241 and r265261: ------------------------------------------------------------------------ r265236 | ken | 2014-05-02 14:25:09 -0600 (Fri, 02 May 2014) | 51 lines Bring in the mpr(4) driver for LSI's MPT3 12Gb SAS controllers. This is derived from the mps(4) driver, but it supports only the 12Gb IT and IR hardware including the SAS 3004, SAS 3008 and SAS 3108. Some notes about this driver: o The 12Gb hardware can do "FastPath" I/O, and that capability is included in this driver. o WarpDrive functionality has been removed, since it isn't supported in the 12Gb driver interface. o The Scatter/Gather list handling code is significantly different between the 6Gb and 12Gb hardware. The 12Gb boards support IEEE Scatter/Gather lists. Thanks to LSI for developing and testing this driver for FreeBSD. share/man/man4/mpr.4: mpr(4) man page. sys/dev/mpr/*: mpr(4) driver files. sys/modules/Makefile, sys/modules/mpr/Makefile: Add a module Makefile for the mpr(4) driver. sys/conf/files: Add the mpr(4) driver. sys/amd64/conf/GENERIC, sys/i386/conf/GENERIC, sys/mips/conf/OCTEON1, sys/sparc64/conf/GENERIC: Add the mpr(4) driver to all config files that currently have the mps(4) driver. sys/ia64/conf/GENERIC: Add the mps(4) and mpr(4) drivers to the ia64 GENERIC config file. sys/i386/conf/XEN: Exclude the mpr module from building here. Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> Tested by: Chris Reeves <chrisr@spectralogic.com> Sponsored by: LSI, Spectra Logic Relnotes: LSI 12Gb SAS driver mpr(4) added ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265237 | ken | 2014-05-02 14:36:20 -0600 (Fri, 02 May 2014) | 8 lines Add the mpr(4) man page to the man4 Makefile. This should have been included in r265236. Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> MFC after: 3 days Sponsored by: LSI, Spectra Logic ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265241 | brueffer | 2014-05-02 15:14:28 -0600 (Fri, 02 May 2014) | 2 lines Use our standard SYNOPSIS wording; perform some cleanup while here. ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265261 | brueffer | 2014-05-03 05:15:28 -0600 (Sat, 03 May 2014) | 2 lines Add a missing colon. ------------------------------------------------------------------------ Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> Tested by: Chris Reeves <chrisr@spectralogic.com> Sponsored by: LSI, Spectra Logic Relnotes: LSI 12Gb SAS driver mpr(4) added diff 265388 Mon May 05 20:43:36 MDT 2014 ken MFC the mpr(4) driver for LSI's 12Gb SAS cards. This includes r265236, r265237, r265241 and r265261: ------------------------------------------------------------------------ r265236 | ken | 2014-05-02 14:25:09 -0600 (Fri, 02 May 2014) | 51 lines Bring in the mpr(4) driver for LSI's MPT3 12Gb SAS controllers. This is derived from the mps(4) driver, but it supports only the 12Gb IT and IR hardware including the SAS 3004, SAS 3008 and SAS 3108. Some notes about this driver: o The 12Gb hardware can do "FastPath" I/O, and that capability is included in this driver. o WarpDrive functionality has been removed, since it isn't supported in the 12Gb driver interface. o The Scatter/Gather list handling code is significantly different between the 6Gb and 12Gb hardware. The 12Gb boards support IEEE Scatter/Gather lists. Thanks to LSI for developing and testing this driver for FreeBSD. share/man/man4/mpr.4: mpr(4) man page. sys/dev/mpr/*: mpr(4) driver files. sys/modules/Makefile, sys/modules/mpr/Makefile: Add a module Makefile for the mpr(4) driver. sys/conf/files: Add the mpr(4) driver. sys/amd64/conf/GENERIC, sys/i386/conf/GENERIC, sys/mips/conf/OCTEON1, sys/sparc64/conf/GENERIC: Add the mpr(4) driver to all config files that currently have the mps(4) driver. sys/ia64/conf/GENERIC: Add the mps(4) and mpr(4) drivers to the ia64 GENERIC config file. sys/i386/conf/XEN: Exclude the mpr module from building here. Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> Tested by: Chris Reeves <chrisr@spectralogic.com> Sponsored by: LSI, Spectra Logic Relnotes: LSI 12Gb SAS driver mpr(4) added ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265237 | ken | 2014-05-02 14:36:20 -0600 (Fri, 02 May 2014) | 8 lines Add the mpr(4) man page to the man4 Makefile. This should have been included in r265236. Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> MFC after: 3 days Sponsored by: LSI, Spectra Logic ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265241 | brueffer | 2014-05-02 15:14:28 -0600 (Fri, 02 May 2014) | 2 lines Use our standard SYNOPSIS wording; perform some cleanup while here. ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265261 | brueffer | 2014-05-03 05:15:28 -0600 (Sat, 03 May 2014) | 2 lines Add a missing colon. ------------------------------------------------------------------------ Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> Tested by: Chris Reeves <chrisr@spectralogic.com> Sponsored by: LSI, Spectra Logic Relnotes: LSI 12Gb SAS driver mpr(4) added diff 265388 Mon May 05 20:43:36 MDT 2014 ken MFC the mpr(4) driver for LSI's 12Gb SAS cards. This includes r265236, r265237, r265241 and r265261: ------------------------------------------------------------------------ r265236 | ken | 2014-05-02 14:25:09 -0600 (Fri, 02 May 2014) | 51 lines Bring in the mpr(4) driver for LSI's MPT3 12Gb SAS controllers. This is derived from the mps(4) driver, but it supports only the 12Gb IT and IR hardware including the SAS 3004, SAS 3008 and SAS 3108. Some notes about this driver: o The 12Gb hardware can do "FastPath" I/O, and that capability is included in this driver. o WarpDrive functionality has been removed, since it isn't supported in the 12Gb driver interface. o The Scatter/Gather list handling code is significantly different between the 6Gb and 12Gb hardware. The 12Gb boards support IEEE Scatter/Gather lists. Thanks to LSI for developing and testing this driver for FreeBSD. share/man/man4/mpr.4: mpr(4) man page. sys/dev/mpr/*: mpr(4) driver files. sys/modules/Makefile, sys/modules/mpr/Makefile: Add a module Makefile for the mpr(4) driver. sys/conf/files: Add the mpr(4) driver. sys/amd64/conf/GENERIC, sys/i386/conf/GENERIC, sys/mips/conf/OCTEON1, sys/sparc64/conf/GENERIC: Add the mpr(4) driver to all config files that currently have the mps(4) driver. sys/ia64/conf/GENERIC: Add the mps(4) and mpr(4) drivers to the ia64 GENERIC config file. sys/i386/conf/XEN: Exclude the mpr module from building here. Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> Tested by: Chris Reeves <chrisr@spectralogic.com> Sponsored by: LSI, Spectra Logic Relnotes: LSI 12Gb SAS driver mpr(4) added ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265237 | ken | 2014-05-02 14:36:20 -0600 (Fri, 02 May 2014) | 8 lines Add the mpr(4) man page to the man4 Makefile. This should have been included in r265236. Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> MFC after: 3 days Sponsored by: LSI, Spectra Logic ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265241 | brueffer | 2014-05-02 15:14:28 -0600 (Fri, 02 May 2014) | 2 lines Use our standard SYNOPSIS wording; perform some cleanup while here. ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265261 | brueffer | 2014-05-03 05:15:28 -0600 (Sat, 03 May 2014) | 2 lines Add a missing colon. ------------------------------------------------------------------------ Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> Tested by: Chris Reeves <chrisr@spectralogic.com> Sponsored by: LSI, Spectra Logic Relnotes: LSI 12Gb SAS driver mpr(4) added diff 265388 Mon May 05 20:43:36 MDT 2014 ken MFC the mpr(4) driver for LSI's 12Gb SAS cards. This includes r265236, r265237, r265241 and r265261: ------------------------------------------------------------------------ r265236 | ken | 2014-05-02 14:25:09 -0600 (Fri, 02 May 2014) | 51 lines Bring in the mpr(4) driver for LSI's MPT3 12Gb SAS controllers. This is derived from the mps(4) driver, but it supports only the 12Gb IT and IR hardware including the SAS 3004, SAS 3008 and SAS 3108. Some notes about this driver: o The 12Gb hardware can do "FastPath" I/O, and that capability is included in this driver. o WarpDrive functionality has been removed, since it isn't supported in the 12Gb driver interface. o The Scatter/Gather list handling code is significantly different between the 6Gb and 12Gb hardware. The 12Gb boards support IEEE Scatter/Gather lists. Thanks to LSI for developing and testing this driver for FreeBSD. share/man/man4/mpr.4: mpr(4) man page. sys/dev/mpr/*: mpr(4) driver files. sys/modules/Makefile, sys/modules/mpr/Makefile: Add a module Makefile for the mpr(4) driver. sys/conf/files: Add the mpr(4) driver. sys/amd64/conf/GENERIC, sys/i386/conf/GENERIC, sys/mips/conf/OCTEON1, sys/sparc64/conf/GENERIC: Add the mpr(4) driver to all config files that currently have the mps(4) driver. sys/ia64/conf/GENERIC: Add the mps(4) and mpr(4) drivers to the ia64 GENERIC config file. sys/i386/conf/XEN: Exclude the mpr module from building here. Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> Tested by: Chris Reeves <chrisr@spectralogic.com> Sponsored by: LSI, Spectra Logic Relnotes: LSI 12Gb SAS driver mpr(4) added ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265237 | ken | 2014-05-02 14:36:20 -0600 (Fri, 02 May 2014) | 8 lines Add the mpr(4) man page to the man4 Makefile. This should have been included in r265236. Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> MFC after: 3 days Sponsored by: LSI, Spectra Logic ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265241 | brueffer | 2014-05-02 15:14:28 -0600 (Fri, 02 May 2014) | 2 lines Use our standard SYNOPSIS wording; perform some cleanup while here. ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265261 | brueffer | 2014-05-03 05:15:28 -0600 (Sat, 03 May 2014) | 2 lines Add a missing colon. ------------------------------------------------------------------------ Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> Tested by: Chris Reeves <chrisr@spectralogic.com> Sponsored by: LSI, Spectra Logic Relnotes: LSI 12Gb SAS driver mpr(4) added diff 265388 Mon May 05 20:43:36 MDT 2014 ken MFC the mpr(4) driver for LSI's 12Gb SAS cards. This includes r265236, r265237, r265241 and r265261: ------------------------------------------------------------------------ r265236 | ken | 2014-05-02 14:25:09 -0600 (Fri, 02 May 2014) | 51 lines Bring in the mpr(4) driver for LSI's MPT3 12Gb SAS controllers. This is derived from the mps(4) driver, but it supports only the 12Gb IT and IR hardware including the SAS 3004, SAS 3008 and SAS 3108. Some notes about this driver: o The 12Gb hardware can do "FastPath" I/O, and that capability is included in this driver. o WarpDrive functionality has been removed, since it isn't supported in the 12Gb driver interface. o The Scatter/Gather list handling code is significantly different between the 6Gb and 12Gb hardware. The 12Gb boards support IEEE Scatter/Gather lists. Thanks to LSI for developing and testing this driver for FreeBSD. share/man/man4/mpr.4: mpr(4) man page. sys/dev/mpr/*: mpr(4) driver files. sys/modules/Makefile, sys/modules/mpr/Makefile: Add a module Makefile for the mpr(4) driver. sys/conf/files: Add the mpr(4) driver. sys/amd64/conf/GENERIC, sys/i386/conf/GENERIC, sys/mips/conf/OCTEON1, sys/sparc64/conf/GENERIC: Add the mpr(4) driver to all config files that currently have the mps(4) driver. sys/ia64/conf/GENERIC: Add the mps(4) and mpr(4) drivers to the ia64 GENERIC config file. sys/i386/conf/XEN: Exclude the mpr module from building here. Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> Tested by: Chris Reeves <chrisr@spectralogic.com> Sponsored by: LSI, Spectra Logic Relnotes: LSI 12Gb SAS driver mpr(4) added ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265237 | ken | 2014-05-02 14:36:20 -0600 (Fri, 02 May 2014) | 8 lines Add the mpr(4) man page to the man4 Makefile. This should have been included in r265236. Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> MFC after: 3 days Sponsored by: LSI, Spectra Logic ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265241 | brueffer | 2014-05-02 15:14:28 -0600 (Fri, 02 May 2014) | 2 lines Use our standard SYNOPSIS wording; perform some cleanup while here. ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265261 | brueffer | 2014-05-03 05:15:28 -0600 (Sat, 03 May 2014) | 2 lines Add a missing colon. ------------------------------------------------------------------------ Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> Tested by: Chris Reeves <chrisr@spectralogic.com> Sponsored by: LSI, Spectra Logic Relnotes: LSI 12Gb SAS driver mpr(4) added diff 265388 Mon May 05 20:43:36 MDT 2014 ken MFC the mpr(4) driver for LSI's 12Gb SAS cards. This includes r265236, r265237, r265241 and r265261: ------------------------------------------------------------------------ r265236 | ken | 2014-05-02 14:25:09 -0600 (Fri, 02 May 2014) | 51 lines Bring in the mpr(4) driver for LSI's MPT3 12Gb SAS controllers. This is derived from the mps(4) driver, but it supports only the 12Gb IT and IR hardware including the SAS 3004, SAS 3008 and SAS 3108. Some notes about this driver: o The 12Gb hardware can do "FastPath" I/O, and that capability is included in this driver. o WarpDrive functionality has been removed, since it isn't supported in the 12Gb driver interface. o The Scatter/Gather list handling code is significantly different between the 6Gb and 12Gb hardware. The 12Gb boards support IEEE Scatter/Gather lists. Thanks to LSI for developing and testing this driver for FreeBSD. share/man/man4/mpr.4: mpr(4) man page. sys/dev/mpr/*: mpr(4) driver files. sys/modules/Makefile, sys/modules/mpr/Makefile: Add a module Makefile for the mpr(4) driver. sys/conf/files: Add the mpr(4) driver. sys/amd64/conf/GENERIC, sys/i386/conf/GENERIC, sys/mips/conf/OCTEON1, sys/sparc64/conf/GENERIC: Add the mpr(4) driver to all config files that currently have the mps(4) driver. sys/ia64/conf/GENERIC: Add the mps(4) and mpr(4) drivers to the ia64 GENERIC config file. sys/i386/conf/XEN: Exclude the mpr module from building here. Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> Tested by: Chris Reeves <chrisr@spectralogic.com> Sponsored by: LSI, Spectra Logic Relnotes: LSI 12Gb SAS driver mpr(4) added ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265237 | ken | 2014-05-02 14:36:20 -0600 (Fri, 02 May 2014) | 8 lines Add the mpr(4) man page to the man4 Makefile. This should have been included in r265236. Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> MFC after: 3 days Sponsored by: LSI, Spectra Logic ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265241 | brueffer | 2014-05-02 15:14:28 -0600 (Fri, 02 May 2014) | 2 lines Use our standard SYNOPSIS wording; perform some cleanup while here. ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265261 | brueffer | 2014-05-03 05:15:28 -0600 (Sat, 03 May 2014) | 2 lines Add a missing colon. ------------------------------------------------------------------------ Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> Tested by: Chris Reeves <chrisr@spectralogic.com> Sponsored by: LSI, Spectra Logic Relnotes: LSI 12Gb SAS driver mpr(4) added diff 265388 Mon May 05 20:43:36 MDT 2014 ken MFC the mpr(4) driver for LSI's 12Gb SAS cards. This includes r265236, r265237, r265241 and r265261: ------------------------------------------------------------------------ r265236 | ken | 2014-05-02 14:25:09 -0600 (Fri, 02 May 2014) | 51 lines Bring in the mpr(4) driver for LSI's MPT3 12Gb SAS controllers. This is derived from the mps(4) driver, but it supports only the 12Gb IT and IR hardware including the SAS 3004, SAS 3008 and SAS 3108. Some notes about this driver: o The 12Gb hardware can do "FastPath" I/O, and that capability is included in this driver. o WarpDrive functionality has been removed, since it isn't supported in the 12Gb driver interface. o The Scatter/Gather list handling code is significantly different between the 6Gb and 12Gb hardware. The 12Gb boards support IEEE Scatter/Gather lists. Thanks to LSI for developing and testing this driver for FreeBSD. share/man/man4/mpr.4: mpr(4) man page. sys/dev/mpr/*: mpr(4) driver files. sys/modules/Makefile, sys/modules/mpr/Makefile: Add a module Makefile for the mpr(4) driver. sys/conf/files: Add the mpr(4) driver. sys/amd64/conf/GENERIC, sys/i386/conf/GENERIC, sys/mips/conf/OCTEON1, sys/sparc64/conf/GENERIC: Add the mpr(4) driver to all config files that currently have the mps(4) driver. sys/ia64/conf/GENERIC: Add the mps(4) and mpr(4) drivers to the ia64 GENERIC config file. sys/i386/conf/XEN: Exclude the mpr module from building here. Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> Tested by: Chris Reeves <chrisr@spectralogic.com> Sponsored by: LSI, Spectra Logic Relnotes: LSI 12Gb SAS driver mpr(4) added ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265237 | ken | 2014-05-02 14:36:20 -0600 (Fri, 02 May 2014) | 8 lines Add the mpr(4) man page to the man4 Makefile. This should have been included in r265236. Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> MFC after: 3 days Sponsored by: LSI, Spectra Logic ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265241 | brueffer | 2014-05-02 15:14:28 -0600 (Fri, 02 May 2014) | 2 lines Use our standard SYNOPSIS wording; perform some cleanup while here. ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265261 | brueffer | 2014-05-03 05:15:28 -0600 (Sat, 03 May 2014) | 2 lines Add a missing colon. ------------------------------------------------------------------------ Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> Tested by: Chris Reeves <chrisr@spectralogic.com> Sponsored by: LSI, Spectra Logic Relnotes: LSI 12Gb SAS driver mpr(4) added diff 265388 Mon May 05 20:43:36 MDT 2014 ken MFC the mpr(4) driver for LSI's 12Gb SAS cards. This includes r265236, r265237, r265241 and r265261: ------------------------------------------------------------------------ r265236 | ken | 2014-05-02 14:25:09 -0600 (Fri, 02 May 2014) | 51 lines Bring in the mpr(4) driver for LSI's MPT3 12Gb SAS controllers. This is derived from the mps(4) driver, but it supports only the 12Gb IT and IR hardware including the SAS 3004, SAS 3008 and SAS 3108. Some notes about this driver: o The 12Gb hardware can do "FastPath" I/O, and that capability is included in this driver. o WarpDrive functionality has been removed, since it isn't supported in the 12Gb driver interface. o The Scatter/Gather list handling code is significantly different between the 6Gb and 12Gb hardware. The 12Gb boards support IEEE Scatter/Gather lists. Thanks to LSI for developing and testing this driver for FreeBSD. share/man/man4/mpr.4: mpr(4) man page. sys/dev/mpr/*: mpr(4) driver files. sys/modules/Makefile, sys/modules/mpr/Makefile: Add a module Makefile for the mpr(4) driver. sys/conf/files: Add the mpr(4) driver. sys/amd64/conf/GENERIC, sys/i386/conf/GENERIC, sys/mips/conf/OCTEON1, sys/sparc64/conf/GENERIC: Add the mpr(4) driver to all config files that currently have the mps(4) driver. sys/ia64/conf/GENERIC: Add the mps(4) and mpr(4) drivers to the ia64 GENERIC config file. sys/i386/conf/XEN: Exclude the mpr module from building here. Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> Tested by: Chris Reeves <chrisr@spectralogic.com> Sponsored by: LSI, Spectra Logic Relnotes: LSI 12Gb SAS driver mpr(4) added ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265237 | ken | 2014-05-02 14:36:20 -0600 (Fri, 02 May 2014) | 8 lines Add the mpr(4) man page to the man4 Makefile. This should have been included in r265236. Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> MFC after: 3 days Sponsored by: LSI, Spectra Logic ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265241 | brueffer | 2014-05-02 15:14:28 -0600 (Fri, 02 May 2014) | 2 lines Use our standard SYNOPSIS wording; perform some cleanup while here. ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265261 | brueffer | 2014-05-03 05:15:28 -0600 (Sat, 03 May 2014) | 2 lines Add a missing colon. ------------------------------------------------------------------------ Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> Tested by: Chris Reeves <chrisr@spectralogic.com> Sponsored by: LSI, Spectra Logic Relnotes: LSI 12Gb SAS driver mpr(4) added diff 265388 Mon May 05 20:43:36 MDT 2014 ken MFC the mpr(4) driver for LSI's 12Gb SAS cards. This includes r265236, r265237, r265241 and r265261: ------------------------------------------------------------------------ r265236 | ken | 2014-05-02 14:25:09 -0600 (Fri, 02 May 2014) | 51 lines Bring in the mpr(4) driver for LSI's MPT3 12Gb SAS controllers. This is derived from the mps(4) driver, but it supports only the 12Gb IT and IR hardware including the SAS 3004, SAS 3008 and SAS 3108. Some notes about this driver: o The 12Gb hardware can do "FastPath" I/O, and that capability is included in this driver. o WarpDrive functionality has been removed, since it isn't supported in the 12Gb driver interface. o The Scatter/Gather list handling code is significantly different between the 6Gb and 12Gb hardware. The 12Gb boards support IEEE Scatter/Gather lists. Thanks to LSI for developing and testing this driver for FreeBSD. share/man/man4/mpr.4: mpr(4) man page. sys/dev/mpr/*: mpr(4) driver files. sys/modules/Makefile, sys/modules/mpr/Makefile: Add a module Makefile for the mpr(4) driver. sys/conf/files: Add the mpr(4) driver. sys/amd64/conf/GENERIC, sys/i386/conf/GENERIC, sys/mips/conf/OCTEON1, sys/sparc64/conf/GENERIC: Add the mpr(4) driver to all config files that currently have the mps(4) driver. sys/ia64/conf/GENERIC: Add the mps(4) and mpr(4) drivers to the ia64 GENERIC config file. sys/i386/conf/XEN: Exclude the mpr module from building here. Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> Tested by: Chris Reeves <chrisr@spectralogic.com> Sponsored by: LSI, Spectra Logic Relnotes: LSI 12Gb SAS driver mpr(4) added ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265237 | ken | 2014-05-02 14:36:20 -0600 (Fri, 02 May 2014) | 8 lines Add the mpr(4) man page to the man4 Makefile. This should have been included in r265236. Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> MFC after: 3 days Sponsored by: LSI, Spectra Logic ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265241 | brueffer | 2014-05-02 15:14:28 -0600 (Fri, 02 May 2014) | 2 lines Use our standard SYNOPSIS wording; perform some cleanup while here. ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265261 | brueffer | 2014-05-03 05:15:28 -0600 (Sat, 03 May 2014) | 2 lines Add a missing colon. ------------------------------------------------------------------------ Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> Tested by: Chris Reeves <chrisr@spectralogic.com> Sponsored by: LSI, Spectra Logic Relnotes: LSI 12Gb SAS driver mpr(4) added diff 265388 Mon May 05 20:43:36 MDT 2014 ken MFC the mpr(4) driver for LSI's 12Gb SAS cards. This includes r265236, r265237, r265241 and r265261: ------------------------------------------------------------------------ r265236 | ken | 2014-05-02 14:25:09 -0600 (Fri, 02 May 2014) | 51 lines Bring in the mpr(4) driver for LSI's MPT3 12Gb SAS controllers. This is derived from the mps(4) driver, but it supports only the 12Gb IT and IR hardware including the SAS 3004, SAS 3008 and SAS 3108. Some notes about this driver: o The 12Gb hardware can do "FastPath" I/O, and that capability is included in this driver. o WarpDrive functionality has been removed, since it isn't supported in the 12Gb driver interface. o The Scatter/Gather list handling code is significantly different between the 6Gb and 12Gb hardware. The 12Gb boards support IEEE Scatter/Gather lists. Thanks to LSI for developing and testing this driver for FreeBSD. share/man/man4/mpr.4: mpr(4) man page. sys/dev/mpr/*: mpr(4) driver files. sys/modules/Makefile, sys/modules/mpr/Makefile: Add a module Makefile for the mpr(4) driver. sys/conf/files: Add the mpr(4) driver. sys/amd64/conf/GENERIC, sys/i386/conf/GENERIC, sys/mips/conf/OCTEON1, sys/sparc64/conf/GENERIC: Add the mpr(4) driver to all config files that currently have the mps(4) driver. sys/ia64/conf/GENERIC: Add the mps(4) and mpr(4) drivers to the ia64 GENERIC config file. sys/i386/conf/XEN: Exclude the mpr module from building here. Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> Tested by: Chris Reeves <chrisr@spectralogic.com> Sponsored by: LSI, Spectra Logic Relnotes: LSI 12Gb SAS driver mpr(4) added ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265237 | ken | 2014-05-02 14:36:20 -0600 (Fri, 02 May 2014) | 8 lines Add the mpr(4) man page to the man4 Makefile. This should have been included in r265236. Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> MFC after: 3 days Sponsored by: LSI, Spectra Logic ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265241 | brueffer | 2014-05-02 15:14:28 -0600 (Fri, 02 May 2014) | 2 lines Use our standard SYNOPSIS wording; perform some cleanup while here. ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265261 | brueffer | 2014-05-03 05:15:28 -0600 (Sat, 03 May 2014) | 2 lines Add a missing colon. ------------------------------------------------------------------------ Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> Tested by: Chris Reeves <chrisr@spectralogic.com> Sponsored by: LSI, Spectra Logic Relnotes: LSI 12Gb SAS driver mpr(4) added diff 265388 Mon May 05 20:43:36 MDT 2014 ken MFC the mpr(4) driver for LSI's 12Gb SAS cards. This includes r265236, r265237, r265241 and r265261: ------------------------------------------------------------------------ r265236 | ken | 2014-05-02 14:25:09 -0600 (Fri, 02 May 2014) | 51 lines Bring in the mpr(4) driver for LSI's MPT3 12Gb SAS controllers. This is derived from the mps(4) driver, but it supports only the 12Gb IT and IR hardware including the SAS 3004, SAS 3008 and SAS 3108. Some notes about this driver: o The 12Gb hardware can do "FastPath" I/O, and that capability is included in this driver. o WarpDrive functionality has been removed, since it isn't supported in the 12Gb driver interface. o The Scatter/Gather list handling code is significantly different between the 6Gb and 12Gb hardware. The 12Gb boards support IEEE Scatter/Gather lists. Thanks to LSI for developing and testing this driver for FreeBSD. share/man/man4/mpr.4: mpr(4) man page. sys/dev/mpr/*: mpr(4) driver files. sys/modules/Makefile, sys/modules/mpr/Makefile: Add a module Makefile for the mpr(4) driver. sys/conf/files: Add the mpr(4) driver. sys/amd64/conf/GENERIC, sys/i386/conf/GENERIC, sys/mips/conf/OCTEON1, sys/sparc64/conf/GENERIC: Add the mpr(4) driver to all config files that currently have the mps(4) driver. sys/ia64/conf/GENERIC: Add the mps(4) and mpr(4) drivers to the ia64 GENERIC config file. sys/i386/conf/XEN: Exclude the mpr module from building here. Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> Tested by: Chris Reeves <chrisr@spectralogic.com> Sponsored by: LSI, Spectra Logic Relnotes: LSI 12Gb SAS driver mpr(4) added ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265237 | ken | 2014-05-02 14:36:20 -0600 (Fri, 02 May 2014) | 8 lines Add the mpr(4) man page to the man4 Makefile. This should have been included in r265236. Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> MFC after: 3 days Sponsored by: LSI, Spectra Logic ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265241 | brueffer | 2014-05-02 15:14:28 -0600 (Fri, 02 May 2014) | 2 lines Use our standard SYNOPSIS wording; perform some cleanup while here. ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265261 | brueffer | 2014-05-03 05:15:28 -0600 (Sat, 03 May 2014) | 2 lines Add a missing colon. ------------------------------------------------------------------------ Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> Tested by: Chris Reeves <chrisr@spectralogic.com> Sponsored by: LSI, Spectra Logic Relnotes: LSI 12Gb SAS driver mpr(4) added diff 265388 Mon May 05 20:43:36 MDT 2014 ken MFC the mpr(4) driver for LSI's 12Gb SAS cards. This includes r265236, r265237, r265241 and r265261: ------------------------------------------------------------------------ r265236 | ken | 2014-05-02 14:25:09 -0600 (Fri, 02 May 2014) | 51 lines Bring in the mpr(4) driver for LSI's MPT3 12Gb SAS controllers. This is derived from the mps(4) driver, but it supports only the 12Gb IT and IR hardware including the SAS 3004, SAS 3008 and SAS 3108. Some notes about this driver: o The 12Gb hardware can do "FastPath" I/O, and that capability is included in this driver. o WarpDrive functionality has been removed, since it isn't supported in the 12Gb driver interface. o The Scatter/Gather list handling code is significantly different between the 6Gb and 12Gb hardware. The 12Gb boards support IEEE Scatter/Gather lists. Thanks to LSI for developing and testing this driver for FreeBSD. share/man/man4/mpr.4: mpr(4) man page. sys/dev/mpr/*: mpr(4) driver files. sys/modules/Makefile, sys/modules/mpr/Makefile: Add a module Makefile for the mpr(4) driver. sys/conf/files: Add the mpr(4) driver. sys/amd64/conf/GENERIC, sys/i386/conf/GENERIC, sys/mips/conf/OCTEON1, sys/sparc64/conf/GENERIC: Add the mpr(4) driver to all config files that currently have the mps(4) driver. sys/ia64/conf/GENERIC: Add the mps(4) and mpr(4) drivers to the ia64 GENERIC config file. sys/i386/conf/XEN: Exclude the mpr module from building here. Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> Tested by: Chris Reeves <chrisr@spectralogic.com> Sponsored by: LSI, Spectra Logic Relnotes: LSI 12Gb SAS driver mpr(4) added ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265237 | ken | 2014-05-02 14:36:20 -0600 (Fri, 02 May 2014) | 8 lines Add the mpr(4) man page to the man4 Makefile. This should have been included in r265236. Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> MFC after: 3 days Sponsored by: LSI, Spectra Logic ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265241 | brueffer | 2014-05-02 15:14:28 -0600 (Fri, 02 May 2014) | 2 lines Use our standard SYNOPSIS wording; perform some cleanup while here. ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265261 | brueffer | 2014-05-03 05:15:28 -0600 (Sat, 03 May 2014) | 2 lines Add a missing colon. ------------------------------------------------------------------------ Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> Tested by: Chris Reeves <chrisr@spectralogic.com> Sponsored by: LSI, Spectra Logic Relnotes: LSI 12Gb SAS driver mpr(4) added diff 265388 Mon May 05 20:43:36 MDT 2014 ken MFC the mpr(4) driver for LSI's 12Gb SAS cards. This includes r265236, r265237, r265241 and r265261: ------------------------------------------------------------------------ r265236 | ken | 2014-05-02 14:25:09 -0600 (Fri, 02 May 2014) | 51 lines Bring in the mpr(4) driver for LSI's MPT3 12Gb SAS controllers. This is derived from the mps(4) driver, but it supports only the 12Gb IT and IR hardware including the SAS 3004, SAS 3008 and SAS 3108. Some notes about this driver: o The 12Gb hardware can do "FastPath" I/O, and that capability is included in this driver. o WarpDrive functionality has been removed, since it isn't supported in the 12Gb driver interface. o The Scatter/Gather list handling code is significantly different between the 6Gb and 12Gb hardware. The 12Gb boards support IEEE Scatter/Gather lists. Thanks to LSI for developing and testing this driver for FreeBSD. share/man/man4/mpr.4: mpr(4) man page. sys/dev/mpr/*: mpr(4) driver files. sys/modules/Makefile, sys/modules/mpr/Makefile: Add a module Makefile for the mpr(4) driver. sys/conf/files: Add the mpr(4) driver. sys/amd64/conf/GENERIC, sys/i386/conf/GENERIC, sys/mips/conf/OCTEON1, sys/sparc64/conf/GENERIC: Add the mpr(4) driver to all config files that currently have the mps(4) driver. sys/ia64/conf/GENERIC: Add the mps(4) and mpr(4) drivers to the ia64 GENERIC config file. sys/i386/conf/XEN: Exclude the mpr module from building here. Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> Tested by: Chris Reeves <chrisr@spectralogic.com> Sponsored by: LSI, Spectra Logic Relnotes: LSI 12Gb SAS driver mpr(4) added ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265237 | ken | 2014-05-02 14:36:20 -0600 (Fri, 02 May 2014) | 8 lines Add the mpr(4) man page to the man4 Makefile. This should have been included in r265236. Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> MFC after: 3 days Sponsored by: LSI, Spectra Logic ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265241 | brueffer | 2014-05-02 15:14:28 -0600 (Fri, 02 May 2014) | 2 lines Use our standard SYNOPSIS wording; perform some cleanup while here. ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265261 | brueffer | 2014-05-03 05:15:28 -0600 (Sat, 03 May 2014) | 2 lines Add a missing colon. ------------------------------------------------------------------------ Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> Tested by: Chris Reeves <chrisr@spectralogic.com> Sponsored by: LSI, Spectra Logic Relnotes: LSI 12Gb SAS driver mpr(4) added |
| H A D | mpr_mapping.c | diff 265388 Mon May 05 20:43:36 MDT 2014 ken MFC the mpr(4) driver for LSI's 12Gb SAS cards. This includes r265236, r265237, r265241 and r265261: ------------------------------------------------------------------------ r265236 | ken | 2014-05-02 14:25:09 -0600 (Fri, 02 May 2014) | 51 lines Bring in the mpr(4) driver for LSI's MPT3 12Gb SAS controllers. This is derived from the mps(4) driver, but it supports only the 12Gb IT and IR hardware including the SAS 3004, SAS 3008 and SAS 3108. Some notes about this driver: o The 12Gb hardware can do "FastPath" I/O, and that capability is included in this driver. o WarpDrive functionality has been removed, since it isn't supported in the 12Gb driver interface. o The Scatter/Gather list handling code is significantly different between the 6Gb and 12Gb hardware. The 12Gb boards support IEEE Scatter/Gather lists. Thanks to LSI for developing and testing this driver for FreeBSD. share/man/man4/mpr.4: mpr(4) man page. sys/dev/mpr/*: mpr(4) driver files. sys/modules/Makefile, sys/modules/mpr/Makefile: Add a module Makefile for the mpr(4) driver. sys/conf/files: Add the mpr(4) driver. sys/amd64/conf/GENERIC, sys/i386/conf/GENERIC, sys/mips/conf/OCTEON1, sys/sparc64/conf/GENERIC: Add the mpr(4) driver to all config files that currently have the mps(4) driver. sys/ia64/conf/GENERIC: Add the mps(4) and mpr(4) drivers to the ia64 GENERIC config file. sys/i386/conf/XEN: Exclude the mpr module from building here. Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> Tested by: Chris Reeves <chrisr@spectralogic.com> Sponsored by: LSI, Spectra Logic Relnotes: LSI 12Gb SAS driver mpr(4) added ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265237 | ken | 2014-05-02 14:36:20 -0600 (Fri, 02 May 2014) | 8 lines Add the mpr(4) man page to the man4 Makefile. This should have been included in r265236. Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> MFC after: 3 days Sponsored by: LSI, Spectra Logic ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265241 | brueffer | 2014-05-02 15:14:28 -0600 (Fri, 02 May 2014) | 2 lines Use our standard SYNOPSIS wording; perform some cleanup while here. ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265261 | brueffer | 2014-05-03 05:15:28 -0600 (Sat, 03 May 2014) | 2 lines Add a missing colon. ------------------------------------------------------------------------ Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> Tested by: Chris Reeves <chrisr@spectralogic.com> Sponsored by: LSI, Spectra Logic Relnotes: LSI 12Gb SAS driver mpr(4) added diff 265388 Mon May 05 20:43:36 MDT 2014 ken MFC the mpr(4) driver for LSI's 12Gb SAS cards. This includes r265236, r265237, r265241 and r265261: ------------------------------------------------------------------------ r265236 | ken | 2014-05-02 14:25:09 -0600 (Fri, 02 May 2014) | 51 lines Bring in the mpr(4) driver for LSI's MPT3 12Gb SAS controllers. This is derived from the mps(4) driver, but it supports only the 12Gb IT and IR hardware including the SAS 3004, SAS 3008 and SAS 3108. Some notes about this driver: o The 12Gb hardware can do "FastPath" I/O, and that capability is included in this driver. o WarpDrive functionality has been removed, since it isn't supported in the 12Gb driver interface. o The Scatter/Gather list handling code is significantly different between the 6Gb and 12Gb hardware. The 12Gb boards support IEEE Scatter/Gather lists. Thanks to LSI for developing and testing this driver for FreeBSD. share/man/man4/mpr.4: mpr(4) man page. sys/dev/mpr/*: mpr(4) driver files. sys/modules/Makefile, sys/modules/mpr/Makefile: Add a module Makefile for the mpr(4) driver. sys/conf/files: Add the mpr(4) driver. sys/amd64/conf/GENERIC, sys/i386/conf/GENERIC, sys/mips/conf/OCTEON1, sys/sparc64/conf/GENERIC: Add the mpr(4) driver to all config files that currently have the mps(4) driver. sys/ia64/conf/GENERIC: Add the mps(4) and mpr(4) drivers to the ia64 GENERIC config file. sys/i386/conf/XEN: Exclude the mpr module from building here. Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> Tested by: Chris Reeves <chrisr@spectralogic.com> Sponsored by: LSI, Spectra Logic Relnotes: LSI 12Gb SAS driver mpr(4) added ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265237 | ken | 2014-05-02 14:36:20 -0600 (Fri, 02 May 2014) | 8 lines Add the mpr(4) man page to the man4 Makefile. This should have been included in r265236. Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> MFC after: 3 days Sponsored by: LSI, Spectra Logic ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265241 | brueffer | 2014-05-02 15:14:28 -0600 (Fri, 02 May 2014) | 2 lines Use our standard SYNOPSIS wording; perform some cleanup while here. ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265261 | brueffer | 2014-05-03 05:15:28 -0600 (Sat, 03 May 2014) | 2 lines Add a missing colon. ------------------------------------------------------------------------ Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> Tested by: Chris Reeves <chrisr@spectralogic.com> Sponsored by: LSI, Spectra Logic Relnotes: LSI 12Gb SAS driver mpr(4) added diff 265388 Mon May 05 20:43:36 MDT 2014 ken MFC the mpr(4) driver for LSI's 12Gb SAS cards. This includes r265236, r265237, r265241 and r265261: ------------------------------------------------------------------------ r265236 | ken | 2014-05-02 14:25:09 -0600 (Fri, 02 May 2014) | 51 lines Bring in the mpr(4) driver for LSI's MPT3 12Gb SAS controllers. This is derived from the mps(4) driver, but it supports only the 12Gb IT and IR hardware including the SAS 3004, SAS 3008 and SAS 3108. Some notes about this driver: o The 12Gb hardware can do "FastPath" I/O, and that capability is included in this driver. o WarpDrive functionality has been removed, since it isn't supported in the 12Gb driver interface. o The Scatter/Gather list handling code is significantly different between the 6Gb and 12Gb hardware. The 12Gb boards support IEEE Scatter/Gather lists. Thanks to LSI for developing and testing this driver for FreeBSD. share/man/man4/mpr.4: mpr(4) man page. sys/dev/mpr/*: mpr(4) driver files. sys/modules/Makefile, sys/modules/mpr/Makefile: Add a module Makefile for the mpr(4) driver. sys/conf/files: Add the mpr(4) driver. sys/amd64/conf/GENERIC, sys/i386/conf/GENERIC, sys/mips/conf/OCTEON1, sys/sparc64/conf/GENERIC: Add the mpr(4) driver to all config files that currently have the mps(4) driver. sys/ia64/conf/GENERIC: Add the mps(4) and mpr(4) drivers to the ia64 GENERIC config file. sys/i386/conf/XEN: Exclude the mpr module from building here. Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> Tested by: Chris Reeves <chrisr@spectralogic.com> Sponsored by: LSI, Spectra Logic Relnotes: LSI 12Gb SAS driver mpr(4) added ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265237 | ken | 2014-05-02 14:36:20 -0600 (Fri, 02 May 2014) | 8 lines Add the mpr(4) man page to the man4 Makefile. This should have been included in r265236. Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> MFC after: 3 days Sponsored by: LSI, Spectra Logic ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265241 | brueffer | 2014-05-02 15:14:28 -0600 (Fri, 02 May 2014) | 2 lines Use our standard SYNOPSIS wording; perform some cleanup while here. ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265261 | brueffer | 2014-05-03 05:15:28 -0600 (Sat, 03 May 2014) | 2 lines Add a missing colon. ------------------------------------------------------------------------ Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> Tested by: Chris Reeves <chrisr@spectralogic.com> Sponsored by: LSI, Spectra Logic Relnotes: LSI 12Gb SAS driver mpr(4) added diff 265388 Mon May 05 20:43:36 MDT 2014 ken MFC the mpr(4) driver for LSI's 12Gb SAS cards. This includes r265236, r265237, r265241 and r265261: ------------------------------------------------------------------------ r265236 | ken | 2014-05-02 14:25:09 -0600 (Fri, 02 May 2014) | 51 lines Bring in the mpr(4) driver for LSI's MPT3 12Gb SAS controllers. This is derived from the mps(4) driver, but it supports only the 12Gb IT and IR hardware including the SAS 3004, SAS 3008 and SAS 3108. Some notes about this driver: o The 12Gb hardware can do "FastPath" I/O, and that capability is included in this driver. o WarpDrive functionality has been removed, since it isn't supported in the 12Gb driver interface. o The Scatter/Gather list handling code is significantly different between the 6Gb and 12Gb hardware. The 12Gb boards support IEEE Scatter/Gather lists. Thanks to LSI for developing and testing this driver for FreeBSD. share/man/man4/mpr.4: mpr(4) man page. sys/dev/mpr/*: mpr(4) driver files. sys/modules/Makefile, sys/modules/mpr/Makefile: Add a module Makefile for the mpr(4) driver. sys/conf/files: Add the mpr(4) driver. sys/amd64/conf/GENERIC, sys/i386/conf/GENERIC, sys/mips/conf/OCTEON1, sys/sparc64/conf/GENERIC: Add the mpr(4) driver to all config files that currently have the mps(4) driver. sys/ia64/conf/GENERIC: Add the mps(4) and mpr(4) drivers to the ia64 GENERIC config file. sys/i386/conf/XEN: Exclude the mpr module from building here. Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> Tested by: Chris Reeves <chrisr@spectralogic.com> Sponsored by: LSI, Spectra Logic Relnotes: LSI 12Gb SAS driver mpr(4) added ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265237 | ken | 2014-05-02 14:36:20 -0600 (Fri, 02 May 2014) | 8 lines Add the mpr(4) man page to the man4 Makefile. This should have been included in r265236. Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> MFC after: 3 days Sponsored by: LSI, Spectra Logic ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265241 | brueffer | 2014-05-02 15:14:28 -0600 (Fri, 02 May 2014) | 2 lines Use our standard SYNOPSIS wording; perform some cleanup while here. ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265261 | brueffer | 2014-05-03 05:15:28 -0600 (Sat, 03 May 2014) | 2 lines Add a missing colon. ------------------------------------------------------------------------ Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> Tested by: Chris Reeves <chrisr@spectralogic.com> Sponsored by: LSI, Spectra Logic Relnotes: LSI 12Gb SAS driver mpr(4) added diff 265388 Mon May 05 20:43:36 MDT 2014 ken MFC the mpr(4) driver for LSI's 12Gb SAS cards. This includes r265236, r265237, r265241 and r265261: ------------------------------------------------------------------------ r265236 | ken | 2014-05-02 14:25:09 -0600 (Fri, 02 May 2014) | 51 lines Bring in the mpr(4) driver for LSI's MPT3 12Gb SAS controllers. This is derived from the mps(4) driver, but it supports only the 12Gb IT and IR hardware including the SAS 3004, SAS 3008 and SAS 3108. Some notes about this driver: o The 12Gb hardware can do "FastPath" I/O, and that capability is included in this driver. o WarpDrive functionality has been removed, since it isn't supported in the 12Gb driver interface. o The Scatter/Gather list handling code is significantly different between the 6Gb and 12Gb hardware. The 12Gb boards support IEEE Scatter/Gather lists. Thanks to LSI for developing and testing this driver for FreeBSD. share/man/man4/mpr.4: mpr(4) man page. sys/dev/mpr/*: mpr(4) driver files. sys/modules/Makefile, sys/modules/mpr/Makefile: Add a module Makefile for the mpr(4) driver. sys/conf/files: Add the mpr(4) driver. sys/amd64/conf/GENERIC, sys/i386/conf/GENERIC, sys/mips/conf/OCTEON1, sys/sparc64/conf/GENERIC: Add the mpr(4) driver to all config files that currently have the mps(4) driver. sys/ia64/conf/GENERIC: Add the mps(4) and mpr(4) drivers to the ia64 GENERIC config file. sys/i386/conf/XEN: Exclude the mpr module from building here. Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> Tested by: Chris Reeves <chrisr@spectralogic.com> Sponsored by: LSI, Spectra Logic Relnotes: LSI 12Gb SAS driver mpr(4) added ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265237 | ken | 2014-05-02 14:36:20 -0600 (Fri, 02 May 2014) | 8 lines Add the mpr(4) man page to the man4 Makefile. This should have been included in r265236. Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> MFC after: 3 days Sponsored by: LSI, Spectra Logic ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265241 | brueffer | 2014-05-02 15:14:28 -0600 (Fri, 02 May 2014) | 2 lines Use our standard SYNOPSIS wording; perform some cleanup while here. ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265261 | brueffer | 2014-05-03 05:15:28 -0600 (Sat, 03 May 2014) | 2 lines Add a missing colon. ------------------------------------------------------------------------ Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> Tested by: Chris Reeves <chrisr@spectralogic.com> Sponsored by: LSI, Spectra Logic Relnotes: LSI 12Gb SAS driver mpr(4) added diff 265388 Mon May 05 20:43:36 MDT 2014 ken MFC the mpr(4) driver for LSI's 12Gb SAS cards. This includes r265236, r265237, r265241 and r265261: ------------------------------------------------------------------------ r265236 | ken | 2014-05-02 14:25:09 -0600 (Fri, 02 May 2014) | 51 lines Bring in the mpr(4) driver for LSI's MPT3 12Gb SAS controllers. This is derived from the mps(4) driver, but it supports only the 12Gb IT and IR hardware including the SAS 3004, SAS 3008 and SAS 3108. Some notes about this driver: o The 12Gb hardware can do "FastPath" I/O, and that capability is included in this driver. o WarpDrive functionality has been removed, since it isn't supported in the 12Gb driver interface. o The Scatter/Gather list handling code is significantly different between the 6Gb and 12Gb hardware. The 12Gb boards support IEEE Scatter/Gather lists. Thanks to LSI for developing and testing this driver for FreeBSD. share/man/man4/mpr.4: mpr(4) man page. sys/dev/mpr/*: mpr(4) driver files. sys/modules/Makefile, sys/modules/mpr/Makefile: Add a module Makefile for the mpr(4) driver. sys/conf/files: Add the mpr(4) driver. sys/amd64/conf/GENERIC, sys/i386/conf/GENERIC, sys/mips/conf/OCTEON1, sys/sparc64/conf/GENERIC: Add the mpr(4) driver to all config files that currently have the mps(4) driver. sys/ia64/conf/GENERIC: Add the mps(4) and mpr(4) drivers to the ia64 GENERIC config file. sys/i386/conf/XEN: Exclude the mpr module from building here. Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> Tested by: Chris Reeves <chrisr@spectralogic.com> Sponsored by: LSI, Spectra Logic Relnotes: LSI 12Gb SAS driver mpr(4) added ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265237 | ken | 2014-05-02 14:36:20 -0600 (Fri, 02 May 2014) | 8 lines Add the mpr(4) man page to the man4 Makefile. This should have been included in r265236. Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> MFC after: 3 days Sponsored by: LSI, Spectra Logic ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265241 | brueffer | 2014-05-02 15:14:28 -0600 (Fri, 02 May 2014) | 2 lines Use our standard SYNOPSIS wording; perform some cleanup while here. ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265261 | brueffer | 2014-05-03 05:15:28 -0600 (Sat, 03 May 2014) | 2 lines Add a missing colon. ------------------------------------------------------------------------ Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> Tested by: Chris Reeves <chrisr@spectralogic.com> Sponsored by: LSI, Spectra Logic Relnotes: LSI 12Gb SAS driver mpr(4) added diff 265388 Mon May 05 20:43:36 MDT 2014 ken MFC the mpr(4) driver for LSI's 12Gb SAS cards. This includes r265236, r265237, r265241 and r265261: ------------------------------------------------------------------------ r265236 | ken | 2014-05-02 14:25:09 -0600 (Fri, 02 May 2014) | 51 lines Bring in the mpr(4) driver for LSI's MPT3 12Gb SAS controllers. This is derived from the mps(4) driver, but it supports only the 12Gb IT and IR hardware including the SAS 3004, SAS 3008 and SAS 3108. Some notes about this driver: o The 12Gb hardware can do "FastPath" I/O, and that capability is included in this driver. o WarpDrive functionality has been removed, since it isn't supported in the 12Gb driver interface. o The Scatter/Gather list handling code is significantly different between the 6Gb and 12Gb hardware. The 12Gb boards support IEEE Scatter/Gather lists. Thanks to LSI for developing and testing this driver for FreeBSD. share/man/man4/mpr.4: mpr(4) man page. sys/dev/mpr/*: mpr(4) driver files. sys/modules/Makefile, sys/modules/mpr/Makefile: Add a module Makefile for the mpr(4) driver. sys/conf/files: Add the mpr(4) driver. sys/amd64/conf/GENERIC, sys/i386/conf/GENERIC, sys/mips/conf/OCTEON1, sys/sparc64/conf/GENERIC: Add the mpr(4) driver to all config files that currently have the mps(4) driver. sys/ia64/conf/GENERIC: Add the mps(4) and mpr(4) drivers to the ia64 GENERIC config file. sys/i386/conf/XEN: Exclude the mpr module from building here. Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> Tested by: Chris Reeves <chrisr@spectralogic.com> Sponsored by: LSI, Spectra Logic Relnotes: LSI 12Gb SAS driver mpr(4) added ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265237 | ken | 2014-05-02 14:36:20 -0600 (Fri, 02 May 2014) | 8 lines Add the mpr(4) man page to the man4 Makefile. This should have been included in r265236. Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> MFC after: 3 days Sponsored by: LSI, Spectra Logic ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265241 | brueffer | 2014-05-02 15:14:28 -0600 (Fri, 02 May 2014) | 2 lines Use our standard SYNOPSIS wording; perform some cleanup while here. ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265261 | brueffer | 2014-05-03 05:15:28 -0600 (Sat, 03 May 2014) | 2 lines Add a missing colon. ------------------------------------------------------------------------ Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> Tested by: Chris Reeves <chrisr@spectralogic.com> Sponsored by: LSI, Spectra Logic Relnotes: LSI 12Gb SAS driver mpr(4) added diff 265388 Mon May 05 20:43:36 MDT 2014 ken MFC the mpr(4) driver for LSI's 12Gb SAS cards. This includes r265236, r265237, r265241 and r265261: ------------------------------------------------------------------------ r265236 | ken | 2014-05-02 14:25:09 -0600 (Fri, 02 May 2014) | 51 lines Bring in the mpr(4) driver for LSI's MPT3 12Gb SAS controllers. This is derived from the mps(4) driver, but it supports only the 12Gb IT and IR hardware including the SAS 3004, SAS 3008 and SAS 3108. Some notes about this driver: o The 12Gb hardware can do "FastPath" I/O, and that capability is included in this driver. o WarpDrive functionality has been removed, since it isn't supported in the 12Gb driver interface. o The Scatter/Gather list handling code is significantly different between the 6Gb and 12Gb hardware. The 12Gb boards support IEEE Scatter/Gather lists. Thanks to LSI for developing and testing this driver for FreeBSD. share/man/man4/mpr.4: mpr(4) man page. sys/dev/mpr/*: mpr(4) driver files. sys/modules/Makefile, sys/modules/mpr/Makefile: Add a module Makefile for the mpr(4) driver. sys/conf/files: Add the mpr(4) driver. sys/amd64/conf/GENERIC, sys/i386/conf/GENERIC, sys/mips/conf/OCTEON1, sys/sparc64/conf/GENERIC: Add the mpr(4) driver to all config files that currently have the mps(4) driver. sys/ia64/conf/GENERIC: Add the mps(4) and mpr(4) drivers to the ia64 GENERIC config file. sys/i386/conf/XEN: Exclude the mpr module from building here. Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> Tested by: Chris Reeves <chrisr@spectralogic.com> Sponsored by: LSI, Spectra Logic Relnotes: LSI 12Gb SAS driver mpr(4) added ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265237 | ken | 2014-05-02 14:36:20 -0600 (Fri, 02 May 2014) | 8 lines Add the mpr(4) man page to the man4 Makefile. This should have been included in r265236. Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> MFC after: 3 days Sponsored by: LSI, Spectra Logic ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265241 | brueffer | 2014-05-02 15:14:28 -0600 (Fri, 02 May 2014) | 2 lines Use our standard SYNOPSIS wording; perform some cleanup while here. ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265261 | brueffer | 2014-05-03 05:15:28 -0600 (Sat, 03 May 2014) | 2 lines Add a missing colon. ------------------------------------------------------------------------ Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> Tested by: Chris Reeves <chrisr@spectralogic.com> Sponsored by: LSI, Spectra Logic Relnotes: LSI 12Gb SAS driver mpr(4) added diff 265388 Mon May 05 20:43:36 MDT 2014 ken MFC the mpr(4) driver for LSI's 12Gb SAS cards. This includes r265236, r265237, r265241 and r265261: ------------------------------------------------------------------------ r265236 | ken | 2014-05-02 14:25:09 -0600 (Fri, 02 May 2014) | 51 lines Bring in the mpr(4) driver for LSI's MPT3 12Gb SAS controllers. This is derived from the mps(4) driver, but it supports only the 12Gb IT and IR hardware including the SAS 3004, SAS 3008 and SAS 3108. Some notes about this driver: o The 12Gb hardware can do "FastPath" I/O, and that capability is included in this driver. o WarpDrive functionality has been removed, since it isn't supported in the 12Gb driver interface. o The Scatter/Gather list handling code is significantly different between the 6Gb and 12Gb hardware. The 12Gb boards support IEEE Scatter/Gather lists. Thanks to LSI for developing and testing this driver for FreeBSD. share/man/man4/mpr.4: mpr(4) man page. sys/dev/mpr/*: mpr(4) driver files. sys/modules/Makefile, sys/modules/mpr/Makefile: Add a module Makefile for the mpr(4) driver. sys/conf/files: Add the mpr(4) driver. sys/amd64/conf/GENERIC, sys/i386/conf/GENERIC, sys/mips/conf/OCTEON1, sys/sparc64/conf/GENERIC: Add the mpr(4) driver to all config files that currently have the mps(4) driver. sys/ia64/conf/GENERIC: Add the mps(4) and mpr(4) drivers to the ia64 GENERIC config file. sys/i386/conf/XEN: Exclude the mpr module from building here. Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> Tested by: Chris Reeves <chrisr@spectralogic.com> Sponsored by: LSI, Spectra Logic Relnotes: LSI 12Gb SAS driver mpr(4) added ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265237 | ken | 2014-05-02 14:36:20 -0600 (Fri, 02 May 2014) | 8 lines Add the mpr(4) man page to the man4 Makefile. This should have been included in r265236. Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> MFC after: 3 days Sponsored by: LSI, Spectra Logic ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265241 | brueffer | 2014-05-02 15:14:28 -0600 (Fri, 02 May 2014) | 2 lines Use our standard SYNOPSIS wording; perform some cleanup while here. ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265261 | brueffer | 2014-05-03 05:15:28 -0600 (Sat, 03 May 2014) | 2 lines Add a missing colon. ------------------------------------------------------------------------ Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> Tested by: Chris Reeves <chrisr@spectralogic.com> Sponsored by: LSI, Spectra Logic Relnotes: LSI 12Gb SAS driver mpr(4) added diff 265388 Mon May 05 20:43:36 MDT 2014 ken MFC the mpr(4) driver for LSI's 12Gb SAS cards. This includes r265236, r265237, r265241 and r265261: ------------------------------------------------------------------------ r265236 | ken | 2014-05-02 14:25:09 -0600 (Fri, 02 May 2014) | 51 lines Bring in the mpr(4) driver for LSI's MPT3 12Gb SAS controllers. This is derived from the mps(4) driver, but it supports only the 12Gb IT and IR hardware including the SAS 3004, SAS 3008 and SAS 3108. Some notes about this driver: o The 12Gb hardware can do "FastPath" I/O, and that capability is included in this driver. o WarpDrive functionality has been removed, since it isn't supported in the 12Gb driver interface. o The Scatter/Gather list handling code is significantly different between the 6Gb and 12Gb hardware. The 12Gb boards support IEEE Scatter/Gather lists. Thanks to LSI for developing and testing this driver for FreeBSD. share/man/man4/mpr.4: mpr(4) man page. sys/dev/mpr/*: mpr(4) driver files. sys/modules/Makefile, sys/modules/mpr/Makefile: Add a module Makefile for the mpr(4) driver. sys/conf/files: Add the mpr(4) driver. sys/amd64/conf/GENERIC, sys/i386/conf/GENERIC, sys/mips/conf/OCTEON1, sys/sparc64/conf/GENERIC: Add the mpr(4) driver to all config files that currently have the mps(4) driver. sys/ia64/conf/GENERIC: Add the mps(4) and mpr(4) drivers to the ia64 GENERIC config file. sys/i386/conf/XEN: Exclude the mpr module from building here. Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> Tested by: Chris Reeves <chrisr@spectralogic.com> Sponsored by: LSI, Spectra Logic Relnotes: LSI 12Gb SAS driver mpr(4) added ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265237 | ken | 2014-05-02 14:36:20 -0600 (Fri, 02 May 2014) | 8 lines Add the mpr(4) man page to the man4 Makefile. This should have been included in r265236. Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> MFC after: 3 days Sponsored by: LSI, Spectra Logic ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265241 | brueffer | 2014-05-02 15:14:28 -0600 (Fri, 02 May 2014) | 2 lines Use our standard SYNOPSIS wording; perform some cleanup while here. ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265261 | brueffer | 2014-05-03 05:15:28 -0600 (Sat, 03 May 2014) | 2 lines Add a missing colon. ------------------------------------------------------------------------ Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> Tested by: Chris Reeves <chrisr@spectralogic.com> Sponsored by: LSI, Spectra Logic Relnotes: LSI 12Gb SAS driver mpr(4) added diff 265388 Mon May 05 20:43:36 MDT 2014 ken MFC the mpr(4) driver for LSI's 12Gb SAS cards. This includes r265236, r265237, r265241 and r265261: ------------------------------------------------------------------------ r265236 | ken | 2014-05-02 14:25:09 -0600 (Fri, 02 May 2014) | 51 lines Bring in the mpr(4) driver for LSI's MPT3 12Gb SAS controllers. This is derived from the mps(4) driver, but it supports only the 12Gb IT and IR hardware including the SAS 3004, SAS 3008 and SAS 3108. Some notes about this driver: o The 12Gb hardware can do "FastPath" I/O, and that capability is included in this driver. o WarpDrive functionality has been removed, since it isn't supported in the 12Gb driver interface. o The Scatter/Gather list handling code is significantly different between the 6Gb and 12Gb hardware. The 12Gb boards support IEEE Scatter/Gather lists. Thanks to LSI for developing and testing this driver for FreeBSD. share/man/man4/mpr.4: mpr(4) man page. sys/dev/mpr/*: mpr(4) driver files. sys/modules/Makefile, sys/modules/mpr/Makefile: Add a module Makefile for the mpr(4) driver. sys/conf/files: Add the mpr(4) driver. sys/amd64/conf/GENERIC, sys/i386/conf/GENERIC, sys/mips/conf/OCTEON1, sys/sparc64/conf/GENERIC: Add the mpr(4) driver to all config files that currently have the mps(4) driver. sys/ia64/conf/GENERIC: Add the mps(4) and mpr(4) drivers to the ia64 GENERIC config file. sys/i386/conf/XEN: Exclude the mpr module from building here. Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> Tested by: Chris Reeves <chrisr@spectralogic.com> Sponsored by: LSI, Spectra Logic Relnotes: LSI 12Gb SAS driver mpr(4) added ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265237 | ken | 2014-05-02 14:36:20 -0600 (Fri, 02 May 2014) | 8 lines Add the mpr(4) man page to the man4 Makefile. This should have been included in r265236. Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> MFC after: 3 days Sponsored by: LSI, Spectra Logic ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265241 | brueffer | 2014-05-02 15:14:28 -0600 (Fri, 02 May 2014) | 2 lines Use our standard SYNOPSIS wording; perform some cleanup while here. ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265261 | brueffer | 2014-05-03 05:15:28 -0600 (Sat, 03 May 2014) | 2 lines Add a missing colon. ------------------------------------------------------------------------ Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> Tested by: Chris Reeves <chrisr@spectralogic.com> Sponsored by: LSI, Spectra Logic Relnotes: LSI 12Gb SAS driver mpr(4) added diff 265388 Mon May 05 20:43:36 MDT 2014 ken MFC the mpr(4) driver for LSI's 12Gb SAS cards. This includes r265236, r265237, r265241 and r265261: ------------------------------------------------------------------------ r265236 | ken | 2014-05-02 14:25:09 -0600 (Fri, 02 May 2014) | 51 lines Bring in the mpr(4) driver for LSI's MPT3 12Gb SAS controllers. This is derived from the mps(4) driver, but it supports only the 12Gb IT and IR hardware including the SAS 3004, SAS 3008 and SAS 3108. Some notes about this driver: o The 12Gb hardware can do "FastPath" I/O, and that capability is included in this driver. o WarpDrive functionality has been removed, since it isn't supported in the 12Gb driver interface. o The Scatter/Gather list handling code is significantly different between the 6Gb and 12Gb hardware. The 12Gb boards support IEEE Scatter/Gather lists. Thanks to LSI for developing and testing this driver for FreeBSD. share/man/man4/mpr.4: mpr(4) man page. sys/dev/mpr/*: mpr(4) driver files. sys/modules/Makefile, sys/modules/mpr/Makefile: Add a module Makefile for the mpr(4) driver. sys/conf/files: Add the mpr(4) driver. sys/amd64/conf/GENERIC, sys/i386/conf/GENERIC, sys/mips/conf/OCTEON1, sys/sparc64/conf/GENERIC: Add the mpr(4) driver to all config files that currently have the mps(4) driver. sys/ia64/conf/GENERIC: Add the mps(4) and mpr(4) drivers to the ia64 GENERIC config file. sys/i386/conf/XEN: Exclude the mpr module from building here. Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> Tested by: Chris Reeves <chrisr@spectralogic.com> Sponsored by: LSI, Spectra Logic Relnotes: LSI 12Gb SAS driver mpr(4) added ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265237 | ken | 2014-05-02 14:36:20 -0600 (Fri, 02 May 2014) | 8 lines Add the mpr(4) man page to the man4 Makefile. This should have been included in r265236. Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> MFC after: 3 days Sponsored by: LSI, Spectra Logic ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265241 | brueffer | 2014-05-02 15:14:28 -0600 (Fri, 02 May 2014) | 2 lines Use our standard SYNOPSIS wording; perform some cleanup while here. ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265261 | brueffer | 2014-05-03 05:15:28 -0600 (Sat, 03 May 2014) | 2 lines Add a missing colon. ------------------------------------------------------------------------ Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> Tested by: Chris Reeves <chrisr@spectralogic.com> Sponsored by: LSI, Spectra Logic Relnotes: LSI 12Gb SAS driver mpr(4) added diff 265388 Mon May 05 20:43:36 MDT 2014 ken MFC the mpr(4) driver for LSI's 12Gb SAS cards. This includes r265236, r265237, r265241 and r265261: ------------------------------------------------------------------------ r265236 | ken | 2014-05-02 14:25:09 -0600 (Fri, 02 May 2014) | 51 lines Bring in the mpr(4) driver for LSI's MPT3 12Gb SAS controllers. This is derived from the mps(4) driver, but it supports only the 12Gb IT and IR hardware including the SAS 3004, SAS 3008 and SAS 3108. Some notes about this driver: o The 12Gb hardware can do "FastPath" I/O, and that capability is included in this driver. o WarpDrive functionality has been removed, since it isn't supported in the 12Gb driver interface. o The Scatter/Gather list handling code is significantly different between the 6Gb and 12Gb hardware. The 12Gb boards support IEEE Scatter/Gather lists. Thanks to LSI for developing and testing this driver for FreeBSD. share/man/man4/mpr.4: mpr(4) man page. sys/dev/mpr/*: mpr(4) driver files. sys/modules/Makefile, sys/modules/mpr/Makefile: Add a module Makefile for the mpr(4) driver. sys/conf/files: Add the mpr(4) driver. sys/amd64/conf/GENERIC, sys/i386/conf/GENERIC, sys/mips/conf/OCTEON1, sys/sparc64/conf/GENERIC: Add the mpr(4) driver to all config files that currently have the mps(4) driver. sys/ia64/conf/GENERIC: Add the mps(4) and mpr(4) drivers to the ia64 GENERIC config file. sys/i386/conf/XEN: Exclude the mpr module from building here. Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> Tested by: Chris Reeves <chrisr@spectralogic.com> Sponsored by: LSI, Spectra Logic Relnotes: LSI 12Gb SAS driver mpr(4) added ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265237 | ken | 2014-05-02 14:36:20 -0600 (Fri, 02 May 2014) | 8 lines Add the mpr(4) man page to the man4 Makefile. This should have been included in r265236. Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> MFC after: 3 days Sponsored by: LSI, Spectra Logic ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265241 | brueffer | 2014-05-02 15:14:28 -0600 (Fri, 02 May 2014) | 2 lines Use our standard SYNOPSIS wording; perform some cleanup while here. ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265261 | brueffer | 2014-05-03 05:15:28 -0600 (Sat, 03 May 2014) | 2 lines Add a missing colon. ------------------------------------------------------------------------ Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> Tested by: Chris Reeves <chrisr@spectralogic.com> Sponsored by: LSI, Spectra Logic Relnotes: LSI 12Gb SAS driver mpr(4) added diff 265388 Mon May 05 20:43:36 MDT 2014 ken MFC the mpr(4) driver for LSI's 12Gb SAS cards. This includes r265236, r265237, r265241 and r265261: ------------------------------------------------------------------------ r265236 | ken | 2014-05-02 14:25:09 -0600 (Fri, 02 May 2014) | 51 lines Bring in the mpr(4) driver for LSI's MPT3 12Gb SAS controllers. This is derived from the mps(4) driver, but it supports only the 12Gb IT and IR hardware including the SAS 3004, SAS 3008 and SAS 3108. Some notes about this driver: o The 12Gb hardware can do "FastPath" I/O, and that capability is included in this driver. o WarpDrive functionality has been removed, since it isn't supported in the 12Gb driver interface. o The Scatter/Gather list handling code is significantly different between the 6Gb and 12Gb hardware. The 12Gb boards support IEEE Scatter/Gather lists. Thanks to LSI for developing and testing this driver for FreeBSD. share/man/man4/mpr.4: mpr(4) man page. sys/dev/mpr/*: mpr(4) driver files. sys/modules/Makefile, sys/modules/mpr/Makefile: Add a module Makefile for the mpr(4) driver. sys/conf/files: Add the mpr(4) driver. sys/amd64/conf/GENERIC, sys/i386/conf/GENERIC, sys/mips/conf/OCTEON1, sys/sparc64/conf/GENERIC: Add the mpr(4) driver to all config files that currently have the mps(4) driver. sys/ia64/conf/GENERIC: Add the mps(4) and mpr(4) drivers to the ia64 GENERIC config file. sys/i386/conf/XEN: Exclude the mpr module from building here. Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> Tested by: Chris Reeves <chrisr@spectralogic.com> Sponsored by: LSI, Spectra Logic Relnotes: LSI 12Gb SAS driver mpr(4) added ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265237 | ken | 2014-05-02 14:36:20 -0600 (Fri, 02 May 2014) | 8 lines Add the mpr(4) man page to the man4 Makefile. This should have been included in r265236. Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> MFC after: 3 days Sponsored by: LSI, Spectra Logic ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265241 | brueffer | 2014-05-02 15:14:28 -0600 (Fri, 02 May 2014) | 2 lines Use our standard SYNOPSIS wording; perform some cleanup while here. ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265261 | brueffer | 2014-05-03 05:15:28 -0600 (Sat, 03 May 2014) | 2 lines Add a missing colon. ------------------------------------------------------------------------ Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> Tested by: Chris Reeves <chrisr@spectralogic.com> Sponsored by: LSI, Spectra Logic Relnotes: LSI 12Gb SAS driver mpr(4) added diff 265388 Mon May 05 20:43:36 MDT 2014 ken MFC the mpr(4) driver for LSI's 12Gb SAS cards. This includes r265236, r265237, r265241 and r265261: ------------------------------------------------------------------------ r265236 | ken | 2014-05-02 14:25:09 -0600 (Fri, 02 May 2014) | 51 lines Bring in the mpr(4) driver for LSI's MPT3 12Gb SAS controllers. This is derived from the mps(4) driver, but it supports only the 12Gb IT and IR hardware including the SAS 3004, SAS 3008 and SAS 3108. Some notes about this driver: o The 12Gb hardware can do "FastPath" I/O, and that capability is included in this driver. o WarpDrive functionality has been removed, since it isn't supported in the 12Gb driver interface. o The Scatter/Gather list handling code is significantly different between the 6Gb and 12Gb hardware. The 12Gb boards support IEEE Scatter/Gather lists. Thanks to LSI for developing and testing this driver for FreeBSD. share/man/man4/mpr.4: mpr(4) man page. sys/dev/mpr/*: mpr(4) driver files. sys/modules/Makefile, sys/modules/mpr/Makefile: Add a module Makefile for the mpr(4) driver. sys/conf/files: Add the mpr(4) driver. sys/amd64/conf/GENERIC, sys/i386/conf/GENERIC, sys/mips/conf/OCTEON1, sys/sparc64/conf/GENERIC: Add the mpr(4) driver to all config files that currently have the mps(4) driver. sys/ia64/conf/GENERIC: Add the mps(4) and mpr(4) drivers to the ia64 GENERIC config file. sys/i386/conf/XEN: Exclude the mpr module from building here. Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> Tested by: Chris Reeves <chrisr@spectralogic.com> Sponsored by: LSI, Spectra Logic Relnotes: LSI 12Gb SAS driver mpr(4) added ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265237 | ken | 2014-05-02 14:36:20 -0600 (Fri, 02 May 2014) | 8 lines Add the mpr(4) man page to the man4 Makefile. This should have been included in r265236. Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> MFC after: 3 days Sponsored by: LSI, Spectra Logic ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265241 | brueffer | 2014-05-02 15:14:28 -0600 (Fri, 02 May 2014) | 2 lines Use our standard SYNOPSIS wording; perform some cleanup while here. ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265261 | brueffer | 2014-05-03 05:15:28 -0600 (Sat, 03 May 2014) | 2 lines Add a missing colon. ------------------------------------------------------------------------ Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> Tested by: Chris Reeves <chrisr@spectralogic.com> Sponsored by: LSI, Spectra Logic Relnotes: LSI 12Gb SAS driver mpr(4) added |
| H A D | mpr_mapping.h | diff 265388 Mon May 05 20:43:36 MDT 2014 ken MFC the mpr(4) driver for LSI's 12Gb SAS cards. This includes r265236, r265237, r265241 and r265261: ------------------------------------------------------------------------ r265236 | ken | 2014-05-02 14:25:09 -0600 (Fri, 02 May 2014) | 51 lines Bring in the mpr(4) driver for LSI's MPT3 12Gb SAS controllers. This is derived from the mps(4) driver, but it supports only the 12Gb IT and IR hardware including the SAS 3004, SAS 3008 and SAS 3108. Some notes about this driver: o The 12Gb hardware can do "FastPath" I/O, and that capability is included in this driver. o WarpDrive functionality has been removed, since it isn't supported in the 12Gb driver interface. o The Scatter/Gather list handling code is significantly different between the 6Gb and 12Gb hardware. The 12Gb boards support IEEE Scatter/Gather lists. Thanks to LSI for developing and testing this driver for FreeBSD. share/man/man4/mpr.4: mpr(4) man page. sys/dev/mpr/*: mpr(4) driver files. sys/modules/Makefile, sys/modules/mpr/Makefile: Add a module Makefile for the mpr(4) driver. sys/conf/files: Add the mpr(4) driver. sys/amd64/conf/GENERIC, sys/i386/conf/GENERIC, sys/mips/conf/OCTEON1, sys/sparc64/conf/GENERIC: Add the mpr(4) driver to all config files that currently have the mps(4) driver. sys/ia64/conf/GENERIC: Add the mps(4) and mpr(4) drivers to the ia64 GENERIC config file. sys/i386/conf/XEN: Exclude the mpr module from building here. Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> Tested by: Chris Reeves <chrisr@spectralogic.com> Sponsored by: LSI, Spectra Logic Relnotes: LSI 12Gb SAS driver mpr(4) added ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265237 | ken | 2014-05-02 14:36:20 -0600 (Fri, 02 May 2014) | 8 lines Add the mpr(4) man page to the man4 Makefile. This should have been included in r265236. Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> MFC after: 3 days Sponsored by: LSI, Spectra Logic ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265241 | brueffer | 2014-05-02 15:14:28 -0600 (Fri, 02 May 2014) | 2 lines Use our standard SYNOPSIS wording; perform some cleanup while here. ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265261 | brueffer | 2014-05-03 05:15:28 -0600 (Sat, 03 May 2014) | 2 lines Add a missing colon. ------------------------------------------------------------------------ Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> Tested by: Chris Reeves <chrisr@spectralogic.com> Sponsored by: LSI, Spectra Logic Relnotes: LSI 12Gb SAS driver mpr(4) added diff 265388 Mon May 05 20:43:36 MDT 2014 ken MFC the mpr(4) driver for LSI's 12Gb SAS cards. This includes r265236, r265237, r265241 and r265261: ------------------------------------------------------------------------ r265236 | ken | 2014-05-02 14:25:09 -0600 (Fri, 02 May 2014) | 51 lines Bring in the mpr(4) driver for LSI's MPT3 12Gb SAS controllers. This is derived from the mps(4) driver, but it supports only the 12Gb IT and IR hardware including the SAS 3004, SAS 3008 and SAS 3108. Some notes about this driver: o The 12Gb hardware can do "FastPath" I/O, and that capability is included in this driver. o WarpDrive functionality has been removed, since it isn't supported in the 12Gb driver interface. o The Scatter/Gather list handling code is significantly different between the 6Gb and 12Gb hardware. The 12Gb boards support IEEE Scatter/Gather lists. Thanks to LSI for developing and testing this driver for FreeBSD. share/man/man4/mpr.4: mpr(4) man page. sys/dev/mpr/*: mpr(4) driver files. sys/modules/Makefile, sys/modules/mpr/Makefile: Add a module Makefile for the mpr(4) driver. sys/conf/files: Add the mpr(4) driver. sys/amd64/conf/GENERIC, sys/i386/conf/GENERIC, sys/mips/conf/OCTEON1, sys/sparc64/conf/GENERIC: Add the mpr(4) driver to all config files that currently have the mps(4) driver. sys/ia64/conf/GENERIC: Add the mps(4) and mpr(4) drivers to the ia64 GENERIC config file. sys/i386/conf/XEN: Exclude the mpr module from building here. Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> Tested by: Chris Reeves <chrisr@spectralogic.com> Sponsored by: LSI, Spectra Logic Relnotes: LSI 12Gb SAS driver mpr(4) added ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265237 | ken | 2014-05-02 14:36:20 -0600 (Fri, 02 May 2014) | 8 lines Add the mpr(4) man page to the man4 Makefile. This should have been included in r265236. Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> MFC after: 3 days Sponsored by: LSI, Spectra Logic ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265241 | brueffer | 2014-05-02 15:14:28 -0600 (Fri, 02 May 2014) | 2 lines Use our standard SYNOPSIS wording; perform some cleanup while here. ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265261 | brueffer | 2014-05-03 05:15:28 -0600 (Sat, 03 May 2014) | 2 lines Add a missing colon. ------------------------------------------------------------------------ Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> Tested by: Chris Reeves <chrisr@spectralogic.com> Sponsored by: LSI, Spectra Logic Relnotes: LSI 12Gb SAS driver mpr(4) added diff 265388 Mon May 05 20:43:36 MDT 2014 ken MFC the mpr(4) driver for LSI's 12Gb SAS cards. This includes r265236, r265237, r265241 and r265261: ------------------------------------------------------------------------ r265236 | ken | 2014-05-02 14:25:09 -0600 (Fri, 02 May 2014) | 51 lines Bring in the mpr(4) driver for LSI's MPT3 12Gb SAS controllers. This is derived from the mps(4) driver, but it supports only the 12Gb IT and IR hardware including the SAS 3004, SAS 3008 and SAS 3108. Some notes about this driver: o The 12Gb hardware can do "FastPath" I/O, and that capability is included in this driver. o WarpDrive functionality has been removed, since it isn't supported in the 12Gb driver interface. o The Scatter/Gather list handling code is significantly different between the 6Gb and 12Gb hardware. The 12Gb boards support IEEE Scatter/Gather lists. Thanks to LSI for developing and testing this driver for FreeBSD. share/man/man4/mpr.4: mpr(4) man page. sys/dev/mpr/*: mpr(4) driver files. sys/modules/Makefile, sys/modules/mpr/Makefile: Add a module Makefile for the mpr(4) driver. sys/conf/files: Add the mpr(4) driver. sys/amd64/conf/GENERIC, sys/i386/conf/GENERIC, sys/mips/conf/OCTEON1, sys/sparc64/conf/GENERIC: Add the mpr(4) driver to all config files that currently have the mps(4) driver. sys/ia64/conf/GENERIC: Add the mps(4) and mpr(4) drivers to the ia64 GENERIC config file. sys/i386/conf/XEN: Exclude the mpr module from building here. Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> Tested by: Chris Reeves <chrisr@spectralogic.com> Sponsored by: LSI, Spectra Logic Relnotes: LSI 12Gb SAS driver mpr(4) added ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265237 | ken | 2014-05-02 14:36:20 -0600 (Fri, 02 May 2014) | 8 lines Add the mpr(4) man page to the man4 Makefile. This should have been included in r265236. Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> MFC after: 3 days Sponsored by: LSI, Spectra Logic ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265241 | brueffer | 2014-05-02 15:14:28 -0600 (Fri, 02 May 2014) | 2 lines Use our standard SYNOPSIS wording; perform some cleanup while here. ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265261 | brueffer | 2014-05-03 05:15:28 -0600 (Sat, 03 May 2014) | 2 lines Add a missing colon. ------------------------------------------------------------------------ Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> Tested by: Chris Reeves <chrisr@spectralogic.com> Sponsored by: LSI, Spectra Logic Relnotes: LSI 12Gb SAS driver mpr(4) added diff 265388 Mon May 05 20:43:36 MDT 2014 ken MFC the mpr(4) driver for LSI's 12Gb SAS cards. This includes r265236, r265237, r265241 and r265261: ------------------------------------------------------------------------ r265236 | ken | 2014-05-02 14:25:09 -0600 (Fri, 02 May 2014) | 51 lines Bring in the mpr(4) driver for LSI's MPT3 12Gb SAS controllers. This is derived from the mps(4) driver, but it supports only the 12Gb IT and IR hardware including the SAS 3004, SAS 3008 and SAS 3108. Some notes about this driver: o The 12Gb hardware can do "FastPath" I/O, and that capability is included in this driver. o WarpDrive functionality has been removed, since it isn't supported in the 12Gb driver interface. o The Scatter/Gather list handling code is significantly different between the 6Gb and 12Gb hardware. The 12Gb boards support IEEE Scatter/Gather lists. Thanks to LSI for developing and testing this driver for FreeBSD. share/man/man4/mpr.4: mpr(4) man page. sys/dev/mpr/*: mpr(4) driver files. sys/modules/Makefile, sys/modules/mpr/Makefile: Add a module Makefile for the mpr(4) driver. sys/conf/files: Add the mpr(4) driver. sys/amd64/conf/GENERIC, sys/i386/conf/GENERIC, sys/mips/conf/OCTEON1, sys/sparc64/conf/GENERIC: Add the mpr(4) driver to all config files that currently have the mps(4) driver. sys/ia64/conf/GENERIC: Add the mps(4) and mpr(4) drivers to the ia64 GENERIC config file. sys/i386/conf/XEN: Exclude the mpr module from building here. Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> Tested by: Chris Reeves <chrisr@spectralogic.com> Sponsored by: LSI, Spectra Logic Relnotes: LSI 12Gb SAS driver mpr(4) added ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265237 | ken | 2014-05-02 14:36:20 -0600 (Fri, 02 May 2014) | 8 lines Add the mpr(4) man page to the man4 Makefile. This should have been included in r265236. Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> MFC after: 3 days Sponsored by: LSI, Spectra Logic ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265241 | brueffer | 2014-05-02 15:14:28 -0600 (Fri, 02 May 2014) | 2 lines Use our standard SYNOPSIS wording; perform some cleanup while here. ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265261 | brueffer | 2014-05-03 05:15:28 -0600 (Sat, 03 May 2014) | 2 lines Add a missing colon. ------------------------------------------------------------------------ Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> Tested by: Chris Reeves <chrisr@spectralogic.com> Sponsored by: LSI, Spectra Logic Relnotes: LSI 12Gb SAS driver mpr(4) added diff 265388 Mon May 05 20:43:36 MDT 2014 ken MFC the mpr(4) driver for LSI's 12Gb SAS cards. This includes r265236, r265237, r265241 and r265261: ------------------------------------------------------------------------ r265236 | ken | 2014-05-02 14:25:09 -0600 (Fri, 02 May 2014) | 51 lines Bring in the mpr(4) driver for LSI's MPT3 12Gb SAS controllers. This is derived from the mps(4) driver, but it supports only the 12Gb IT and IR hardware including the SAS 3004, SAS 3008 and SAS 3108. Some notes about this driver: o The 12Gb hardware can do "FastPath" I/O, and that capability is included in this driver. o WarpDrive functionality has been removed, since it isn't supported in the 12Gb driver interface. o The Scatter/Gather list handling code is significantly different between the 6Gb and 12Gb hardware. The 12Gb boards support IEEE Scatter/Gather lists. Thanks to LSI for developing and testing this driver for FreeBSD. share/man/man4/mpr.4: mpr(4) man page. sys/dev/mpr/*: mpr(4) driver files. sys/modules/Makefile, sys/modules/mpr/Makefile: Add a module Makefile for the mpr(4) driver. sys/conf/files: Add the mpr(4) driver. sys/amd64/conf/GENERIC, sys/i386/conf/GENERIC, sys/mips/conf/OCTEON1, sys/sparc64/conf/GENERIC: Add the mpr(4) driver to all config files that currently have the mps(4) driver. sys/ia64/conf/GENERIC: Add the mps(4) and mpr(4) drivers to the ia64 GENERIC config file. sys/i386/conf/XEN: Exclude the mpr module from building here. Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> Tested by: Chris Reeves <chrisr@spectralogic.com> Sponsored by: LSI, Spectra Logic Relnotes: LSI 12Gb SAS driver mpr(4) added ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265237 | ken | 2014-05-02 14:36:20 -0600 (Fri, 02 May 2014) | 8 lines Add the mpr(4) man page to the man4 Makefile. This should have been included in r265236. Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> MFC after: 3 days Sponsored by: LSI, Spectra Logic ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265241 | brueffer | 2014-05-02 15:14:28 -0600 (Fri, 02 May 2014) | 2 lines Use our standard SYNOPSIS wording; perform some cleanup while here. ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265261 | brueffer | 2014-05-03 05:15:28 -0600 (Sat, 03 May 2014) | 2 lines Add a missing colon. ------------------------------------------------------------------------ Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> Tested by: Chris Reeves <chrisr@spectralogic.com> Sponsored by: LSI, Spectra Logic Relnotes: LSI 12Gb SAS driver mpr(4) added diff 265388 Mon May 05 20:43:36 MDT 2014 ken MFC the mpr(4) driver for LSI's 12Gb SAS cards. This includes r265236, r265237, r265241 and r265261: ------------------------------------------------------------------------ r265236 | ken | 2014-05-02 14:25:09 -0600 (Fri, 02 May 2014) | 51 lines Bring in the mpr(4) driver for LSI's MPT3 12Gb SAS controllers. This is derived from the mps(4) driver, but it supports only the 12Gb IT and IR hardware including the SAS 3004, SAS 3008 and SAS 3108. Some notes about this driver: o The 12Gb hardware can do "FastPath" I/O, and that capability is included in this driver. o WarpDrive functionality has been removed, since it isn't supported in the 12Gb driver interface. o The Scatter/Gather list handling code is significantly different between the 6Gb and 12Gb hardware. The 12Gb boards support IEEE Scatter/Gather lists. Thanks to LSI for developing and testing this driver for FreeBSD. share/man/man4/mpr.4: mpr(4) man page. sys/dev/mpr/*: mpr(4) driver files. sys/modules/Makefile, sys/modules/mpr/Makefile: Add a module Makefile for the mpr(4) driver. sys/conf/files: Add the mpr(4) driver. sys/amd64/conf/GENERIC, sys/i386/conf/GENERIC, sys/mips/conf/OCTEON1, sys/sparc64/conf/GENERIC: Add the mpr(4) driver to all config files that currently have the mps(4) driver. sys/ia64/conf/GENERIC: Add the mps(4) and mpr(4) drivers to the ia64 GENERIC config file. sys/i386/conf/XEN: Exclude the mpr module from building here. Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> Tested by: Chris Reeves <chrisr@spectralogic.com> Sponsored by: LSI, Spectra Logic Relnotes: LSI 12Gb SAS driver mpr(4) added ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265237 | ken | 2014-05-02 14:36:20 -0600 (Fri, 02 May 2014) | 8 lines Add the mpr(4) man page to the man4 Makefile. This should have been included in r265236. Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> MFC after: 3 days Sponsored by: LSI, Spectra Logic ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265241 | brueffer | 2014-05-02 15:14:28 -0600 (Fri, 02 May 2014) | 2 lines Use our standard SYNOPSIS wording; perform some cleanup while here. ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265261 | brueffer | 2014-05-03 05:15:28 -0600 (Sat, 03 May 2014) | 2 lines Add a missing colon. ------------------------------------------------------------------------ Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> Tested by: Chris Reeves <chrisr@spectralogic.com> Sponsored by: LSI, Spectra Logic Relnotes: LSI 12Gb SAS driver mpr(4) added diff 265388 Mon May 05 20:43:36 MDT 2014 ken MFC the mpr(4) driver for LSI's 12Gb SAS cards. This includes r265236, r265237, r265241 and r265261: ------------------------------------------------------------------------ r265236 | ken | 2014-05-02 14:25:09 -0600 (Fri, 02 May 2014) | 51 lines Bring in the mpr(4) driver for LSI's MPT3 12Gb SAS controllers. This is derived from the mps(4) driver, but it supports only the 12Gb IT and IR hardware including the SAS 3004, SAS 3008 and SAS 3108. Some notes about this driver: o The 12Gb hardware can do "FastPath" I/O, and that capability is included in this driver. o WarpDrive functionality has been removed, since it isn't supported in the 12Gb driver interface. o The Scatter/Gather list handling code is significantly different between the 6Gb and 12Gb hardware. The 12Gb boards support IEEE Scatter/Gather lists. Thanks to LSI for developing and testing this driver for FreeBSD. share/man/man4/mpr.4: mpr(4) man page. sys/dev/mpr/*: mpr(4) driver files. sys/modules/Makefile, sys/modules/mpr/Makefile: Add a module Makefile for the mpr(4) driver. sys/conf/files: Add the mpr(4) driver. sys/amd64/conf/GENERIC, sys/i386/conf/GENERIC, sys/mips/conf/OCTEON1, sys/sparc64/conf/GENERIC: Add the mpr(4) driver to all config files that currently have the mps(4) driver. sys/ia64/conf/GENERIC: Add the mps(4) and mpr(4) drivers to the ia64 GENERIC config file. sys/i386/conf/XEN: Exclude the mpr module from building here. Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> Tested by: Chris Reeves <chrisr@spectralogic.com> Sponsored by: LSI, Spectra Logic Relnotes: LSI 12Gb SAS driver mpr(4) added ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265237 | ken | 2014-05-02 14:36:20 -0600 (Fri, 02 May 2014) | 8 lines Add the mpr(4) man page to the man4 Makefile. This should have been included in r265236. Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> MFC after: 3 days Sponsored by: LSI, Spectra Logic ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265241 | brueffer | 2014-05-02 15:14:28 -0600 (Fri, 02 May 2014) | 2 lines Use our standard SYNOPSIS wording; perform some cleanup while here. ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265261 | brueffer | 2014-05-03 05:15:28 -0600 (Sat, 03 May 2014) | 2 lines Add a missing colon. ------------------------------------------------------------------------ Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> Tested by: Chris Reeves <chrisr@spectralogic.com> Sponsored by: LSI, Spectra Logic Relnotes: LSI 12Gb SAS driver mpr(4) added diff 265388 Mon May 05 20:43:36 MDT 2014 ken MFC the mpr(4) driver for LSI's 12Gb SAS cards. This includes r265236, r265237, r265241 and r265261: ------------------------------------------------------------------------ r265236 | ken | 2014-05-02 14:25:09 -0600 (Fri, 02 May 2014) | 51 lines Bring in the mpr(4) driver for LSI's MPT3 12Gb SAS controllers. This is derived from the mps(4) driver, but it supports only the 12Gb IT and IR hardware including the SAS 3004, SAS 3008 and SAS 3108. Some notes about this driver: o The 12Gb hardware can do "FastPath" I/O, and that capability is included in this driver. o WarpDrive functionality has been removed, since it isn't supported in the 12Gb driver interface. o The Scatter/Gather list handling code is significantly different between the 6Gb and 12Gb hardware. The 12Gb boards support IEEE Scatter/Gather lists. Thanks to LSI for developing and testing this driver for FreeBSD. share/man/man4/mpr.4: mpr(4) man page. sys/dev/mpr/*: mpr(4) driver files. sys/modules/Makefile, sys/modules/mpr/Makefile: Add a module Makefile for the mpr(4) driver. sys/conf/files: Add the mpr(4) driver. sys/amd64/conf/GENERIC, sys/i386/conf/GENERIC, sys/mips/conf/OCTEON1, sys/sparc64/conf/GENERIC: Add the mpr(4) driver to all config files that currently have the mps(4) driver. sys/ia64/conf/GENERIC: Add the mps(4) and mpr(4) drivers to the ia64 GENERIC config file. sys/i386/conf/XEN: Exclude the mpr module from building here. Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> Tested by: Chris Reeves <chrisr@spectralogic.com> Sponsored by: LSI, Spectra Logic Relnotes: LSI 12Gb SAS driver mpr(4) added ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265237 | ken | 2014-05-02 14:36:20 -0600 (Fri, 02 May 2014) | 8 lines Add the mpr(4) man page to the man4 Makefile. This should have been included in r265236. Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> MFC after: 3 days Sponsored by: LSI, Spectra Logic ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265241 | brueffer | 2014-05-02 15:14:28 -0600 (Fri, 02 May 2014) | 2 lines Use our standard SYNOPSIS wording; perform some cleanup while here. ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265261 | brueffer | 2014-05-03 05:15:28 -0600 (Sat, 03 May 2014) | 2 lines Add a missing colon. ------------------------------------------------------------------------ Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> Tested by: Chris Reeves <chrisr@spectralogic.com> Sponsored by: LSI, Spectra Logic Relnotes: LSI 12Gb SAS driver mpr(4) added diff 265388 Mon May 05 20:43:36 MDT 2014 ken MFC the mpr(4) driver for LSI's 12Gb SAS cards. This includes r265236, r265237, r265241 and r265261: ------------------------------------------------------------------------ r265236 | ken | 2014-05-02 14:25:09 -0600 (Fri, 02 May 2014) | 51 lines Bring in the mpr(4) driver for LSI's MPT3 12Gb SAS controllers. This is derived from the mps(4) driver, but it supports only the 12Gb IT and IR hardware including the SAS 3004, SAS 3008 and SAS 3108. Some notes about this driver: o The 12Gb hardware can do "FastPath" I/O, and that capability is included in this driver. o WarpDrive functionality has been removed, since it isn't supported in the 12Gb driver interface. o The Scatter/Gather list handling code is significantly different between the 6Gb and 12Gb hardware. The 12Gb boards support IEEE Scatter/Gather lists. Thanks to LSI for developing and testing this driver for FreeBSD. share/man/man4/mpr.4: mpr(4) man page. sys/dev/mpr/*: mpr(4) driver files. sys/modules/Makefile, sys/modules/mpr/Makefile: Add a module Makefile for the mpr(4) driver. sys/conf/files: Add the mpr(4) driver. sys/amd64/conf/GENERIC, sys/i386/conf/GENERIC, sys/mips/conf/OCTEON1, sys/sparc64/conf/GENERIC: Add the mpr(4) driver to all config files that currently have the mps(4) driver. sys/ia64/conf/GENERIC: Add the mps(4) and mpr(4) drivers to the ia64 GENERIC config file. sys/i386/conf/XEN: Exclude the mpr module from building here. Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> Tested by: Chris Reeves <chrisr@spectralogic.com> Sponsored by: LSI, Spectra Logic Relnotes: LSI 12Gb SAS driver mpr(4) added ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265237 | ken | 2014-05-02 14:36:20 -0600 (Fri, 02 May 2014) | 8 lines Add the mpr(4) man page to the man4 Makefile. This should have been included in r265236. Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> MFC after: 3 days Sponsored by: LSI, Spectra Logic ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265241 | brueffer | 2014-05-02 15:14:28 -0600 (Fri, 02 May 2014) | 2 lines Use our standard SYNOPSIS wording; perform some cleanup while here. ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265261 | brueffer | 2014-05-03 05:15:28 -0600 (Sat, 03 May 2014) | 2 lines Add a missing colon. ------------------------------------------------------------------------ Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> Tested by: Chris Reeves <chrisr@spectralogic.com> Sponsored by: LSI, Spectra Logic Relnotes: LSI 12Gb SAS driver mpr(4) added diff 265388 Mon May 05 20:43:36 MDT 2014 ken MFC the mpr(4) driver for LSI's 12Gb SAS cards. This includes r265236, r265237, r265241 and r265261: ------------------------------------------------------------------------ r265236 | ken | 2014-05-02 14:25:09 -0600 (Fri, 02 May 2014) | 51 lines Bring in the mpr(4) driver for LSI's MPT3 12Gb SAS controllers. This is derived from the mps(4) driver, but it supports only the 12Gb IT and IR hardware including the SAS 3004, SAS 3008 and SAS 3108. Some notes about this driver: o The 12Gb hardware can do "FastPath" I/O, and that capability is included in this driver. o WarpDrive functionality has been removed, since it isn't supported in the 12Gb driver interface. o The Scatter/Gather list handling code is significantly different between the 6Gb and 12Gb hardware. The 12Gb boards support IEEE Scatter/Gather lists. Thanks to LSI for developing and testing this driver for FreeBSD. share/man/man4/mpr.4: mpr(4) man page. sys/dev/mpr/*: mpr(4) driver files. sys/modules/Makefile, sys/modules/mpr/Makefile: Add a module Makefile for the mpr(4) driver. sys/conf/files: Add the mpr(4) driver. sys/amd64/conf/GENERIC, sys/i386/conf/GENERIC, sys/mips/conf/OCTEON1, sys/sparc64/conf/GENERIC: Add the mpr(4) driver to all config files that currently have the mps(4) driver. sys/ia64/conf/GENERIC: Add the mps(4) and mpr(4) drivers to the ia64 GENERIC config file. sys/i386/conf/XEN: Exclude the mpr module from building here. Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> Tested by: Chris Reeves <chrisr@spectralogic.com> Sponsored by: LSI, Spectra Logic Relnotes: LSI 12Gb SAS driver mpr(4) added ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265237 | ken | 2014-05-02 14:36:20 -0600 (Fri, 02 May 2014) | 8 lines Add the mpr(4) man page to the man4 Makefile. This should have been included in r265236. Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> MFC after: 3 days Sponsored by: LSI, Spectra Logic ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265241 | brueffer | 2014-05-02 15:14:28 -0600 (Fri, 02 May 2014) | 2 lines Use our standard SYNOPSIS wording; perform some cleanup while here. ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265261 | brueffer | 2014-05-03 05:15:28 -0600 (Sat, 03 May 2014) | 2 lines Add a missing colon. ------------------------------------------------------------------------ Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> Tested by: Chris Reeves <chrisr@spectralogic.com> Sponsored by: LSI, Spectra Logic Relnotes: LSI 12Gb SAS driver mpr(4) added diff 265388 Mon May 05 20:43:36 MDT 2014 ken MFC the mpr(4) driver for LSI's 12Gb SAS cards. This includes r265236, r265237, r265241 and r265261: ------------------------------------------------------------------------ r265236 | ken | 2014-05-02 14:25:09 -0600 (Fri, 02 May 2014) | 51 lines Bring in the mpr(4) driver for LSI's MPT3 12Gb SAS controllers. This is derived from the mps(4) driver, but it supports only the 12Gb IT and IR hardware including the SAS 3004, SAS 3008 and SAS 3108. Some notes about this driver: o The 12Gb hardware can do "FastPath" I/O, and that capability is included in this driver. o WarpDrive functionality has been removed, since it isn't supported in the 12Gb driver interface. o The Scatter/Gather list handling code is significantly different between the 6Gb and 12Gb hardware. The 12Gb boards support IEEE Scatter/Gather lists. Thanks to LSI for developing and testing this driver for FreeBSD. share/man/man4/mpr.4: mpr(4) man page. sys/dev/mpr/*: mpr(4) driver files. sys/modules/Makefile, sys/modules/mpr/Makefile: Add a module Makefile for the mpr(4) driver. sys/conf/files: Add the mpr(4) driver. sys/amd64/conf/GENERIC, sys/i386/conf/GENERIC, sys/mips/conf/OCTEON1, sys/sparc64/conf/GENERIC: Add the mpr(4) driver to all config files that currently have the mps(4) driver. sys/ia64/conf/GENERIC: Add the mps(4) and mpr(4) drivers to the ia64 GENERIC config file. sys/i386/conf/XEN: Exclude the mpr module from building here. Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> Tested by: Chris Reeves <chrisr@spectralogic.com> Sponsored by: LSI, Spectra Logic Relnotes: LSI 12Gb SAS driver mpr(4) added ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265237 | ken | 2014-05-02 14:36:20 -0600 (Fri, 02 May 2014) | 8 lines Add the mpr(4) man page to the man4 Makefile. This should have been included in r265236. Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> MFC after: 3 days Sponsored by: LSI, Spectra Logic ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265241 | brueffer | 2014-05-02 15:14:28 -0600 (Fri, 02 May 2014) | 2 lines Use our standard SYNOPSIS wording; perform some cleanup while here. ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265261 | brueffer | 2014-05-03 05:15:28 -0600 (Sat, 03 May 2014) | 2 lines Add a missing colon. ------------------------------------------------------------------------ Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> Tested by: Chris Reeves <chrisr@spectralogic.com> Sponsored by: LSI, Spectra Logic Relnotes: LSI 12Gb SAS driver mpr(4) added diff 265388 Mon May 05 20:43:36 MDT 2014 ken MFC the mpr(4) driver for LSI's 12Gb SAS cards. This includes r265236, r265237, r265241 and r265261: ------------------------------------------------------------------------ r265236 | ken | 2014-05-02 14:25:09 -0600 (Fri, 02 May 2014) | 51 lines Bring in the mpr(4) driver for LSI's MPT3 12Gb SAS controllers. This is derived from the mps(4) driver, but it supports only the 12Gb IT and IR hardware including the SAS 3004, SAS 3008 and SAS 3108. Some notes about this driver: o The 12Gb hardware can do "FastPath" I/O, and that capability is included in this driver. o WarpDrive functionality has been removed, since it isn't supported in the 12Gb driver interface. o The Scatter/Gather list handling code is significantly different between the 6Gb and 12Gb hardware. The 12Gb boards support IEEE Scatter/Gather lists. Thanks to LSI for developing and testing this driver for FreeBSD. share/man/man4/mpr.4: mpr(4) man page. sys/dev/mpr/*: mpr(4) driver files. sys/modules/Makefile, sys/modules/mpr/Makefile: Add a module Makefile for the mpr(4) driver. sys/conf/files: Add the mpr(4) driver. sys/amd64/conf/GENERIC, sys/i386/conf/GENERIC, sys/mips/conf/OCTEON1, sys/sparc64/conf/GENERIC: Add the mpr(4) driver to all config files that currently have the mps(4) driver. sys/ia64/conf/GENERIC: Add the mps(4) and mpr(4) drivers to the ia64 GENERIC config file. sys/i386/conf/XEN: Exclude the mpr module from building here. Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> Tested by: Chris Reeves <chrisr@spectralogic.com> Sponsored by: LSI, Spectra Logic Relnotes: LSI 12Gb SAS driver mpr(4) added ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265237 | ken | 2014-05-02 14:36:20 -0600 (Fri, 02 May 2014) | 8 lines Add the mpr(4) man page to the man4 Makefile. This should have been included in r265236. Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> MFC after: 3 days Sponsored by: LSI, Spectra Logic ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265241 | brueffer | 2014-05-02 15:14:28 -0600 (Fri, 02 May 2014) | 2 lines Use our standard SYNOPSIS wording; perform some cleanup while here. ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265261 | brueffer | 2014-05-03 05:15:28 -0600 (Sat, 03 May 2014) | 2 lines Add a missing colon. ------------------------------------------------------------------------ Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> Tested by: Chris Reeves <chrisr@spectralogic.com> Sponsored by: LSI, Spectra Logic Relnotes: LSI 12Gb SAS driver mpr(4) added diff 265388 Mon May 05 20:43:36 MDT 2014 ken MFC the mpr(4) driver for LSI's 12Gb SAS cards. This includes r265236, r265237, r265241 and r265261: ------------------------------------------------------------------------ r265236 | ken | 2014-05-02 14:25:09 -0600 (Fri, 02 May 2014) | 51 lines Bring in the mpr(4) driver for LSI's MPT3 12Gb SAS controllers. This is derived from the mps(4) driver, but it supports only the 12Gb IT and IR hardware including the SAS 3004, SAS 3008 and SAS 3108. Some notes about this driver: o The 12Gb hardware can do "FastPath" I/O, and that capability is included in this driver. o WarpDrive functionality has been removed, since it isn't supported in the 12Gb driver interface. o The Scatter/Gather list handling code is significantly different between the 6Gb and 12Gb hardware. The 12Gb boards support IEEE Scatter/Gather lists. Thanks to LSI for developing and testing this driver for FreeBSD. share/man/man4/mpr.4: mpr(4) man page. sys/dev/mpr/*: mpr(4) driver files. sys/modules/Makefile, sys/modules/mpr/Makefile: Add a module Makefile for the mpr(4) driver. sys/conf/files: Add the mpr(4) driver. sys/amd64/conf/GENERIC, sys/i386/conf/GENERIC, sys/mips/conf/OCTEON1, sys/sparc64/conf/GENERIC: Add the mpr(4) driver to all config files that currently have the mps(4) driver. sys/ia64/conf/GENERIC: Add the mps(4) and mpr(4) drivers to the ia64 GENERIC config file. sys/i386/conf/XEN: Exclude the mpr module from building here. Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> Tested by: Chris Reeves <chrisr@spectralogic.com> Sponsored by: LSI, Spectra Logic Relnotes: LSI 12Gb SAS driver mpr(4) added ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265237 | ken | 2014-05-02 14:36:20 -0600 (Fri, 02 May 2014) | 8 lines Add the mpr(4) man page to the man4 Makefile. This should have been included in r265236. Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> MFC after: 3 days Sponsored by: LSI, Spectra Logic ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265241 | brueffer | 2014-05-02 15:14:28 -0600 (Fri, 02 May 2014) | 2 lines Use our standard SYNOPSIS wording; perform some cleanup while here. ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265261 | brueffer | 2014-05-03 05:15:28 -0600 (Sat, 03 May 2014) | 2 lines Add a missing colon. ------------------------------------------------------------------------ Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> Tested by: Chris Reeves <chrisr@spectralogic.com> Sponsored by: LSI, Spectra Logic Relnotes: LSI 12Gb SAS driver mpr(4) added diff 265388 Mon May 05 20:43:36 MDT 2014 ken MFC the mpr(4) driver for LSI's 12Gb SAS cards. This includes r265236, r265237, r265241 and r265261: ------------------------------------------------------------------------ r265236 | ken | 2014-05-02 14:25:09 -0600 (Fri, 02 May 2014) | 51 lines Bring in the mpr(4) driver for LSI's MPT3 12Gb SAS controllers. This is derived from the mps(4) driver, but it supports only the 12Gb IT and IR hardware including the SAS 3004, SAS 3008 and SAS 3108. Some notes about this driver: o The 12Gb hardware can do "FastPath" I/O, and that capability is included in this driver. o WarpDrive functionality has been removed, since it isn't supported in the 12Gb driver interface. o The Scatter/Gather list handling code is significantly different between the 6Gb and 12Gb hardware. The 12Gb boards support IEEE Scatter/Gather lists. Thanks to LSI for developing and testing this driver for FreeBSD. share/man/man4/mpr.4: mpr(4) man page. sys/dev/mpr/*: mpr(4) driver files. sys/modules/Makefile, sys/modules/mpr/Makefile: Add a module Makefile for the mpr(4) driver. sys/conf/files: Add the mpr(4) driver. sys/amd64/conf/GENERIC, sys/i386/conf/GENERIC, sys/mips/conf/OCTEON1, sys/sparc64/conf/GENERIC: Add the mpr(4) driver to all config files that currently have the mps(4) driver. sys/ia64/conf/GENERIC: Add the mps(4) and mpr(4) drivers to the ia64 GENERIC config file. sys/i386/conf/XEN: Exclude the mpr module from building here. Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> Tested by: Chris Reeves <chrisr@spectralogic.com> Sponsored by: LSI, Spectra Logic Relnotes: LSI 12Gb SAS driver mpr(4) added ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265237 | ken | 2014-05-02 14:36:20 -0600 (Fri, 02 May 2014) | 8 lines Add the mpr(4) man page to the man4 Makefile. This should have been included in r265236. Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> MFC after: 3 days Sponsored by: LSI, Spectra Logic ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265241 | brueffer | 2014-05-02 15:14:28 -0600 (Fri, 02 May 2014) | 2 lines Use our standard SYNOPSIS wording; perform some cleanup while here. ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265261 | brueffer | 2014-05-03 05:15:28 -0600 (Sat, 03 May 2014) | 2 lines Add a missing colon. ------------------------------------------------------------------------ Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> Tested by: Chris Reeves <chrisr@spectralogic.com> Sponsored by: LSI, Spectra Logic Relnotes: LSI 12Gb SAS driver mpr(4) added diff 265388 Mon May 05 20:43:36 MDT 2014 ken MFC the mpr(4) driver for LSI's 12Gb SAS cards. This includes r265236, r265237, r265241 and r265261: ------------------------------------------------------------------------ r265236 | ken | 2014-05-02 14:25:09 -0600 (Fri, 02 May 2014) | 51 lines Bring in the mpr(4) driver for LSI's MPT3 12Gb SAS controllers. This is derived from the mps(4) driver, but it supports only the 12Gb IT and IR hardware including the SAS 3004, SAS 3008 and SAS 3108. Some notes about this driver: o The 12Gb hardware can do "FastPath" I/O, and that capability is included in this driver. o WarpDrive functionality has been removed, since it isn't supported in the 12Gb driver interface. o The Scatter/Gather list handling code is significantly different between the 6Gb and 12Gb hardware. The 12Gb boards support IEEE Scatter/Gather lists. Thanks to LSI for developing and testing this driver for FreeBSD. share/man/man4/mpr.4: mpr(4) man page. sys/dev/mpr/*: mpr(4) driver files. sys/modules/Makefile, sys/modules/mpr/Makefile: Add a module Makefile for the mpr(4) driver. sys/conf/files: Add the mpr(4) driver. sys/amd64/conf/GENERIC, sys/i386/conf/GENERIC, sys/mips/conf/OCTEON1, sys/sparc64/conf/GENERIC: Add the mpr(4) driver to all config files that currently have the mps(4) driver. sys/ia64/conf/GENERIC: Add the mps(4) and mpr(4) drivers to the ia64 GENERIC config file. sys/i386/conf/XEN: Exclude the mpr module from building here. Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> Tested by: Chris Reeves <chrisr@spectralogic.com> Sponsored by: LSI, Spectra Logic Relnotes: LSI 12Gb SAS driver mpr(4) added ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265237 | ken | 2014-05-02 14:36:20 -0600 (Fri, 02 May 2014) | 8 lines Add the mpr(4) man page to the man4 Makefile. This should have been included in r265236. Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> MFC after: 3 days Sponsored by: LSI, Spectra Logic ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265241 | brueffer | 2014-05-02 15:14:28 -0600 (Fri, 02 May 2014) | 2 lines Use our standard SYNOPSIS wording; perform some cleanup while here. ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265261 | brueffer | 2014-05-03 05:15:28 -0600 (Sat, 03 May 2014) | 2 lines Add a missing colon. ------------------------------------------------------------------------ Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> Tested by: Chris Reeves <chrisr@spectralogic.com> Sponsored by: LSI, Spectra Logic Relnotes: LSI 12Gb SAS driver mpr(4) added |
| H A D | mpr_pci.c | diff 265388 Mon May 05 20:43:36 MDT 2014 ken MFC the mpr(4) driver for LSI's 12Gb SAS cards. This includes r265236, r265237, r265241 and r265261: ------------------------------------------------------------------------ r265236 | ken | 2014-05-02 14:25:09 -0600 (Fri, 02 May 2014) | 51 lines Bring in the mpr(4) driver for LSI's MPT3 12Gb SAS controllers. This is derived from the mps(4) driver, but it supports only the 12Gb IT and IR hardware including the SAS 3004, SAS 3008 and SAS 3108. Some notes about this driver: o The 12Gb hardware can do "FastPath" I/O, and that capability is included in this driver. o WarpDrive functionality has been removed, since it isn't supported in the 12Gb driver interface. o The Scatter/Gather list handling code is significantly different between the 6Gb and 12Gb hardware. The 12Gb boards support IEEE Scatter/Gather lists. Thanks to LSI for developing and testing this driver for FreeBSD. share/man/man4/mpr.4: mpr(4) man page. sys/dev/mpr/*: mpr(4) driver files. sys/modules/Makefile, sys/modules/mpr/Makefile: Add a module Makefile for the mpr(4) driver. sys/conf/files: Add the mpr(4) driver. sys/amd64/conf/GENERIC, sys/i386/conf/GENERIC, sys/mips/conf/OCTEON1, sys/sparc64/conf/GENERIC: Add the mpr(4) driver to all config files that currently have the mps(4) driver. sys/ia64/conf/GENERIC: Add the mps(4) and mpr(4) drivers to the ia64 GENERIC config file. sys/i386/conf/XEN: Exclude the mpr module from building here. Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> Tested by: Chris Reeves <chrisr@spectralogic.com> Sponsored by: LSI, Spectra Logic Relnotes: LSI 12Gb SAS driver mpr(4) added ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265237 | ken | 2014-05-02 14:36:20 -0600 (Fri, 02 May 2014) | 8 lines Add the mpr(4) man page to the man4 Makefile. This should have been included in r265236. Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> MFC after: 3 days Sponsored by: LSI, Spectra Logic ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265241 | brueffer | 2014-05-02 15:14:28 -0600 (Fri, 02 May 2014) | 2 lines Use our standard SYNOPSIS wording; perform some cleanup while here. ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265261 | brueffer | 2014-05-03 05:15:28 -0600 (Sat, 03 May 2014) | 2 lines Add a missing colon. ------------------------------------------------------------------------ Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> Tested by: Chris Reeves <chrisr@spectralogic.com> Sponsored by: LSI, Spectra Logic Relnotes: LSI 12Gb SAS driver mpr(4) added diff 265388 Mon May 05 20:43:36 MDT 2014 ken MFC the mpr(4) driver for LSI's 12Gb SAS cards. This includes r265236, r265237, r265241 and r265261: ------------------------------------------------------------------------ r265236 | ken | 2014-05-02 14:25:09 -0600 (Fri, 02 May 2014) | 51 lines Bring in the mpr(4) driver for LSI's MPT3 12Gb SAS controllers. This is derived from the mps(4) driver, but it supports only the 12Gb IT and IR hardware including the SAS 3004, SAS 3008 and SAS 3108. Some notes about this driver: o The 12Gb hardware can do "FastPath" I/O, and that capability is included in this driver. o WarpDrive functionality has been removed, since it isn't supported in the 12Gb driver interface. o The Scatter/Gather list handling code is significantly different between the 6Gb and 12Gb hardware. The 12Gb boards support IEEE Scatter/Gather lists. Thanks to LSI for developing and testing this driver for FreeBSD. share/man/man4/mpr.4: mpr(4) man page. sys/dev/mpr/*: mpr(4) driver files. sys/modules/Makefile, sys/modules/mpr/Makefile: Add a module Makefile for the mpr(4) driver. sys/conf/files: Add the mpr(4) driver. sys/amd64/conf/GENERIC, sys/i386/conf/GENERIC, sys/mips/conf/OCTEON1, sys/sparc64/conf/GENERIC: Add the mpr(4) driver to all config files that currently have the mps(4) driver. sys/ia64/conf/GENERIC: Add the mps(4) and mpr(4) drivers to the ia64 GENERIC config file. sys/i386/conf/XEN: Exclude the mpr module from building here. Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> Tested by: Chris Reeves <chrisr@spectralogic.com> Sponsored by: LSI, Spectra Logic Relnotes: LSI 12Gb SAS driver mpr(4) added ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265237 | ken | 2014-05-02 14:36:20 -0600 (Fri, 02 May 2014) | 8 lines Add the mpr(4) man page to the man4 Makefile. This should have been included in r265236. Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> MFC after: 3 days Sponsored by: LSI, Spectra Logic ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265241 | brueffer | 2014-05-02 15:14:28 -0600 (Fri, 02 May 2014) | 2 lines Use our standard SYNOPSIS wording; perform some cleanup while here. ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265261 | brueffer | 2014-05-03 05:15:28 -0600 (Sat, 03 May 2014) | 2 lines Add a missing colon. ------------------------------------------------------------------------ Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> Tested by: Chris Reeves <chrisr@spectralogic.com> Sponsored by: LSI, Spectra Logic Relnotes: LSI 12Gb SAS driver mpr(4) added diff 265388 Mon May 05 20:43:36 MDT 2014 ken MFC the mpr(4) driver for LSI's 12Gb SAS cards. This includes r265236, r265237, r265241 and r265261: ------------------------------------------------------------------------ r265236 | ken | 2014-05-02 14:25:09 -0600 (Fri, 02 May 2014) | 51 lines Bring in the mpr(4) driver for LSI's MPT3 12Gb SAS controllers. This is derived from the mps(4) driver, but it supports only the 12Gb IT and IR hardware including the SAS 3004, SAS 3008 and SAS 3108. Some notes about this driver: o The 12Gb hardware can do "FastPath" I/O, and that capability is included in this driver. o WarpDrive functionality has been removed, since it isn't supported in the 12Gb driver interface. o The Scatter/Gather list handling code is significantly different between the 6Gb and 12Gb hardware. The 12Gb boards support IEEE Scatter/Gather lists. Thanks to LSI for developing and testing this driver for FreeBSD. share/man/man4/mpr.4: mpr(4) man page. sys/dev/mpr/*: mpr(4) driver files. sys/modules/Makefile, sys/modules/mpr/Makefile: Add a module Makefile for the mpr(4) driver. sys/conf/files: Add the mpr(4) driver. sys/amd64/conf/GENERIC, sys/i386/conf/GENERIC, sys/mips/conf/OCTEON1, sys/sparc64/conf/GENERIC: Add the mpr(4) driver to all config files that currently have the mps(4) driver. sys/ia64/conf/GENERIC: Add the mps(4) and mpr(4) drivers to the ia64 GENERIC config file. sys/i386/conf/XEN: Exclude the mpr module from building here. Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> Tested by: Chris Reeves <chrisr@spectralogic.com> Sponsored by: LSI, Spectra Logic Relnotes: LSI 12Gb SAS driver mpr(4) added ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265237 | ken | 2014-05-02 14:36:20 -0600 (Fri, 02 May 2014) | 8 lines Add the mpr(4) man page to the man4 Makefile. This should have been included in r265236. Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> MFC after: 3 days Sponsored by: LSI, Spectra Logic ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265241 | brueffer | 2014-05-02 15:14:28 -0600 (Fri, 02 May 2014) | 2 lines Use our standard SYNOPSIS wording; perform some cleanup while here. ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265261 | brueffer | 2014-05-03 05:15:28 -0600 (Sat, 03 May 2014) | 2 lines Add a missing colon. ------------------------------------------------------------------------ Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> Tested by: Chris Reeves <chrisr@spectralogic.com> Sponsored by: LSI, Spectra Logic Relnotes: LSI 12Gb SAS driver mpr(4) added diff 265388 Mon May 05 20:43:36 MDT 2014 ken MFC the mpr(4) driver for LSI's 12Gb SAS cards. This includes r265236, r265237, r265241 and r265261: ------------------------------------------------------------------------ r265236 | ken | 2014-05-02 14:25:09 -0600 (Fri, 02 May 2014) | 51 lines Bring in the mpr(4) driver for LSI's MPT3 12Gb SAS controllers. This is derived from the mps(4) driver, but it supports only the 12Gb IT and IR hardware including the SAS 3004, SAS 3008 and SAS 3108. Some notes about this driver: o The 12Gb hardware can do "FastPath" I/O, and that capability is included in this driver. o WarpDrive functionality has been removed, since it isn't supported in the 12Gb driver interface. o The Scatter/Gather list handling code is significantly different between the 6Gb and 12Gb hardware. The 12Gb boards support IEEE Scatter/Gather lists. Thanks to LSI for developing and testing this driver for FreeBSD. share/man/man4/mpr.4: mpr(4) man page. sys/dev/mpr/*: mpr(4) driver files. sys/modules/Makefile, sys/modules/mpr/Makefile: Add a module Makefile for the mpr(4) driver. sys/conf/files: Add the mpr(4) driver. sys/amd64/conf/GENERIC, sys/i386/conf/GENERIC, sys/mips/conf/OCTEON1, sys/sparc64/conf/GENERIC: Add the mpr(4) driver to all config files that currently have the mps(4) driver. sys/ia64/conf/GENERIC: Add the mps(4) and mpr(4) drivers to the ia64 GENERIC config file. sys/i386/conf/XEN: Exclude the mpr module from building here. Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> Tested by: Chris Reeves <chrisr@spectralogic.com> Sponsored by: LSI, Spectra Logic Relnotes: LSI 12Gb SAS driver mpr(4) added ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265237 | ken | 2014-05-02 14:36:20 -0600 (Fri, 02 May 2014) | 8 lines Add the mpr(4) man page to the man4 Makefile. This should have been included in r265236. Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> MFC after: 3 days Sponsored by: LSI, Spectra Logic ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265241 | brueffer | 2014-05-02 15:14:28 -0600 (Fri, 02 May 2014) | 2 lines Use our standard SYNOPSIS wording; perform some cleanup while here. ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265261 | brueffer | 2014-05-03 05:15:28 -0600 (Sat, 03 May 2014) | 2 lines Add a missing colon. ------------------------------------------------------------------------ Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> Tested by: Chris Reeves <chrisr@spectralogic.com> Sponsored by: LSI, Spectra Logic Relnotes: LSI 12Gb SAS driver mpr(4) added diff 265388 Mon May 05 20:43:36 MDT 2014 ken MFC the mpr(4) driver for LSI's 12Gb SAS cards. This includes r265236, r265237, r265241 and r265261: ------------------------------------------------------------------------ r265236 | ken | 2014-05-02 14:25:09 -0600 (Fri, 02 May 2014) | 51 lines Bring in the mpr(4) driver for LSI's MPT3 12Gb SAS controllers. This is derived from the mps(4) driver, but it supports only the 12Gb IT and IR hardware including the SAS 3004, SAS 3008 and SAS 3108. Some notes about this driver: o The 12Gb hardware can do "FastPath" I/O, and that capability is included in this driver. o WarpDrive functionality has been removed, since it isn't supported in the 12Gb driver interface. o The Scatter/Gather list handling code is significantly different between the 6Gb and 12Gb hardware. The 12Gb boards support IEEE Scatter/Gather lists. Thanks to LSI for developing and testing this driver for FreeBSD. share/man/man4/mpr.4: mpr(4) man page. sys/dev/mpr/*: mpr(4) driver files. sys/modules/Makefile, sys/modules/mpr/Makefile: Add a module Makefile for the mpr(4) driver. sys/conf/files: Add the mpr(4) driver. sys/amd64/conf/GENERIC, sys/i386/conf/GENERIC, sys/mips/conf/OCTEON1, sys/sparc64/conf/GENERIC: Add the mpr(4) driver to all config files that currently have the mps(4) driver. sys/ia64/conf/GENERIC: Add the mps(4) and mpr(4) drivers to the ia64 GENERIC config file. sys/i386/conf/XEN: Exclude the mpr module from building here. Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> Tested by: Chris Reeves <chrisr@spectralogic.com> Sponsored by: LSI, Spectra Logic Relnotes: LSI 12Gb SAS driver mpr(4) added ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265237 | ken | 2014-05-02 14:36:20 -0600 (Fri, 02 May 2014) | 8 lines Add the mpr(4) man page to the man4 Makefile. This should have been included in r265236. Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> MFC after: 3 days Sponsored by: LSI, Spectra Logic ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265241 | brueffer | 2014-05-02 15:14:28 -0600 (Fri, 02 May 2014) | 2 lines Use our standard SYNOPSIS wording; perform some cleanup while here. ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265261 | brueffer | 2014-05-03 05:15:28 -0600 (Sat, 03 May 2014) | 2 lines Add a missing colon. ------------------------------------------------------------------------ Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> Tested by: Chris Reeves <chrisr@spectralogic.com> Sponsored by: LSI, Spectra Logic Relnotes: LSI 12Gb SAS driver mpr(4) added diff 265388 Mon May 05 20:43:36 MDT 2014 ken MFC the mpr(4) driver for LSI's 12Gb SAS cards. This includes r265236, r265237, r265241 and r265261: ------------------------------------------------------------------------ r265236 | ken | 2014-05-02 14:25:09 -0600 (Fri, 02 May 2014) | 51 lines Bring in the mpr(4) driver for LSI's MPT3 12Gb SAS controllers. This is derived from the mps(4) driver, but it supports only the 12Gb IT and IR hardware including the SAS 3004, SAS 3008 and SAS 3108. Some notes about this driver: o The 12Gb hardware can do "FastPath" I/O, and that capability is included in this driver. o WarpDrive functionality has been removed, since it isn't supported in the 12Gb driver interface. o The Scatter/Gather list handling code is significantly different between the 6Gb and 12Gb hardware. The 12Gb boards support IEEE Scatter/Gather lists. Thanks to LSI for developing and testing this driver for FreeBSD. share/man/man4/mpr.4: mpr(4) man page. sys/dev/mpr/*: mpr(4) driver files. sys/modules/Makefile, sys/modules/mpr/Makefile: Add a module Makefile for the mpr(4) driver. sys/conf/files: Add the mpr(4) driver. sys/amd64/conf/GENERIC, sys/i386/conf/GENERIC, sys/mips/conf/OCTEON1, sys/sparc64/conf/GENERIC: Add the mpr(4) driver to all config files that currently have the mps(4) driver. sys/ia64/conf/GENERIC: Add the mps(4) and mpr(4) drivers to the ia64 GENERIC config file. sys/i386/conf/XEN: Exclude the mpr module from building here. Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> Tested by: Chris Reeves <chrisr@spectralogic.com> Sponsored by: LSI, Spectra Logic Relnotes: LSI 12Gb SAS driver mpr(4) added ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265237 | ken | 2014-05-02 14:36:20 -0600 (Fri, 02 May 2014) | 8 lines Add the mpr(4) man page to the man4 Makefile. This should have been included in r265236. Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> MFC after: 3 days Sponsored by: LSI, Spectra Logic ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265241 | brueffer | 2014-05-02 15:14:28 -0600 (Fri, 02 May 2014) | 2 lines Use our standard SYNOPSIS wording; perform some cleanup while here. ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265261 | brueffer | 2014-05-03 05:15:28 -0600 (Sat, 03 May 2014) | 2 lines Add a missing colon. ------------------------------------------------------------------------ Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> Tested by: Chris Reeves <chrisr@spectralogic.com> Sponsored by: LSI, Spectra Logic Relnotes: LSI 12Gb SAS driver mpr(4) added diff 265388 Mon May 05 20:43:36 MDT 2014 ken MFC the mpr(4) driver for LSI's 12Gb SAS cards. This includes r265236, r265237, r265241 and r265261: ------------------------------------------------------------------------ r265236 | ken | 2014-05-02 14:25:09 -0600 (Fri, 02 May 2014) | 51 lines Bring in the mpr(4) driver for LSI's MPT3 12Gb SAS controllers. This is derived from the mps(4) driver, but it supports only the 12Gb IT and IR hardware including the SAS 3004, SAS 3008 and SAS 3108. Some notes about this driver: o The 12Gb hardware can do "FastPath" I/O, and that capability is included in this driver. o WarpDrive functionality has been removed, since it isn't supported in the 12Gb driver interface. o The Scatter/Gather list handling code is significantly different between the 6Gb and 12Gb hardware. The 12Gb boards support IEEE Scatter/Gather lists. Thanks to LSI for developing and testing this driver for FreeBSD. share/man/man4/mpr.4: mpr(4) man page. sys/dev/mpr/*: mpr(4) driver files. sys/modules/Makefile, sys/modules/mpr/Makefile: Add a module Makefile for the mpr(4) driver. sys/conf/files: Add the mpr(4) driver. sys/amd64/conf/GENERIC, sys/i386/conf/GENERIC, sys/mips/conf/OCTEON1, sys/sparc64/conf/GENERIC: Add the mpr(4) driver to all config files that currently have the mps(4) driver. sys/ia64/conf/GENERIC: Add the mps(4) and mpr(4) drivers to the ia64 GENERIC config file. sys/i386/conf/XEN: Exclude the mpr module from building here. Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> Tested by: Chris Reeves <chrisr@spectralogic.com> Sponsored by: LSI, Spectra Logic Relnotes: LSI 12Gb SAS driver mpr(4) added ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265237 | ken | 2014-05-02 14:36:20 -0600 (Fri, 02 May 2014) | 8 lines Add the mpr(4) man page to the man4 Makefile. This should have been included in r265236. Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> MFC after: 3 days Sponsored by: LSI, Spectra Logic ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265241 | brueffer | 2014-05-02 15:14:28 -0600 (Fri, 02 May 2014) | 2 lines Use our standard SYNOPSIS wording; perform some cleanup while here. ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265261 | brueffer | 2014-05-03 05:15:28 -0600 (Sat, 03 May 2014) | 2 lines Add a missing colon. ------------------------------------------------------------------------ Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> Tested by: Chris Reeves <chrisr@spectralogic.com> Sponsored by: LSI, Spectra Logic Relnotes: LSI 12Gb SAS driver mpr(4) added diff 265388 Mon May 05 20:43:36 MDT 2014 ken MFC the mpr(4) driver for LSI's 12Gb SAS cards. This includes r265236, r265237, r265241 and r265261: ------------------------------------------------------------------------ r265236 | ken | 2014-05-02 14:25:09 -0600 (Fri, 02 May 2014) | 51 lines Bring in the mpr(4) driver for LSI's MPT3 12Gb SAS controllers. This is derived from the mps(4) driver, but it supports only the 12Gb IT and IR hardware including the SAS 3004, SAS 3008 and SAS 3108. Some notes about this driver: o The 12Gb hardware can do "FastPath" I/O, and that capability is included in this driver. o WarpDrive functionality has been removed, since it isn't supported in the 12Gb driver interface. o The Scatter/Gather list handling code is significantly different between the 6Gb and 12Gb hardware. The 12Gb boards support IEEE Scatter/Gather lists. Thanks to LSI for developing and testing this driver for FreeBSD. share/man/man4/mpr.4: mpr(4) man page. sys/dev/mpr/*: mpr(4) driver files. sys/modules/Makefile, sys/modules/mpr/Makefile: Add a module Makefile for the mpr(4) driver. sys/conf/files: Add the mpr(4) driver. sys/amd64/conf/GENERIC, sys/i386/conf/GENERIC, sys/mips/conf/OCTEON1, sys/sparc64/conf/GENERIC: Add the mpr(4) driver to all config files that currently have the mps(4) driver. sys/ia64/conf/GENERIC: Add the mps(4) and mpr(4) drivers to the ia64 GENERIC config file. sys/i386/conf/XEN: Exclude the mpr module from building here. Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> Tested by: Chris Reeves <chrisr@spectralogic.com> Sponsored by: LSI, Spectra Logic Relnotes: LSI 12Gb SAS driver mpr(4) added ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265237 | ken | 2014-05-02 14:36:20 -0600 (Fri, 02 May 2014) | 8 lines Add the mpr(4) man page to the man4 Makefile. This should have been included in r265236. Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> MFC after: 3 days Sponsored by: LSI, Spectra Logic ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265241 | brueffer | 2014-05-02 15:14:28 -0600 (Fri, 02 May 2014) | 2 lines Use our standard SYNOPSIS wording; perform some cleanup while here. ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265261 | brueffer | 2014-05-03 05:15:28 -0600 (Sat, 03 May 2014) | 2 lines Add a missing colon. ------------------------------------------------------------------------ Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> Tested by: Chris Reeves <chrisr@spectralogic.com> Sponsored by: LSI, Spectra Logic Relnotes: LSI 12Gb SAS driver mpr(4) added diff 265388 Mon May 05 20:43:36 MDT 2014 ken MFC the mpr(4) driver for LSI's 12Gb SAS cards. This includes r265236, r265237, r265241 and r265261: ------------------------------------------------------------------------ r265236 | ken | 2014-05-02 14:25:09 -0600 (Fri, 02 May 2014) | 51 lines Bring in the mpr(4) driver for LSI's MPT3 12Gb SAS controllers. This is derived from the mps(4) driver, but it supports only the 12Gb IT and IR hardware including the SAS 3004, SAS 3008 and SAS 3108. Some notes about this driver: o The 12Gb hardware can do "FastPath" I/O, and that capability is included in this driver. o WarpDrive functionality has been removed, since it isn't supported in the 12Gb driver interface. o The Scatter/Gather list handling code is significantly different between the 6Gb and 12Gb hardware. The 12Gb boards support IEEE Scatter/Gather lists. Thanks to LSI for developing and testing this driver for FreeBSD. share/man/man4/mpr.4: mpr(4) man page. sys/dev/mpr/*: mpr(4) driver files. sys/modules/Makefile, sys/modules/mpr/Makefile: Add a module Makefile for the mpr(4) driver. sys/conf/files: Add the mpr(4) driver. sys/amd64/conf/GENERIC, sys/i386/conf/GENERIC, sys/mips/conf/OCTEON1, sys/sparc64/conf/GENERIC: Add the mpr(4) driver to all config files that currently have the mps(4) driver. sys/ia64/conf/GENERIC: Add the mps(4) and mpr(4) drivers to the ia64 GENERIC config file. sys/i386/conf/XEN: Exclude the mpr module from building here. Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> Tested by: Chris Reeves <chrisr@spectralogic.com> Sponsored by: LSI, Spectra Logic Relnotes: LSI 12Gb SAS driver mpr(4) added ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265237 | ken | 2014-05-02 14:36:20 -0600 (Fri, 02 May 2014) | 8 lines Add the mpr(4) man page to the man4 Makefile. This should have been included in r265236. Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> MFC after: 3 days Sponsored by: LSI, Spectra Logic ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265241 | brueffer | 2014-05-02 15:14:28 -0600 (Fri, 02 May 2014) | 2 lines Use our standard SYNOPSIS wording; perform some cleanup while here. ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265261 | brueffer | 2014-05-03 05:15:28 -0600 (Sat, 03 May 2014) | 2 lines Add a missing colon. ------------------------------------------------------------------------ Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> Tested by: Chris Reeves <chrisr@spectralogic.com> Sponsored by: LSI, Spectra Logic Relnotes: LSI 12Gb SAS driver mpr(4) added diff 265388 Mon May 05 20:43:36 MDT 2014 ken MFC the mpr(4) driver for LSI's 12Gb SAS cards. This includes r265236, r265237, r265241 and r265261: ------------------------------------------------------------------------ r265236 | ken | 2014-05-02 14:25:09 -0600 (Fri, 02 May 2014) | 51 lines Bring in the mpr(4) driver for LSI's MPT3 12Gb SAS controllers. This is derived from the mps(4) driver, but it supports only the 12Gb IT and IR hardware including the SAS 3004, SAS 3008 and SAS 3108. Some notes about this driver: o The 12Gb hardware can do "FastPath" I/O, and that capability is included in this driver. o WarpDrive functionality has been removed, since it isn't supported in the 12Gb driver interface. o The Scatter/Gather list handling code is significantly different between the 6Gb and 12Gb hardware. The 12Gb boards support IEEE Scatter/Gather lists. Thanks to LSI for developing and testing this driver for FreeBSD. share/man/man4/mpr.4: mpr(4) man page. sys/dev/mpr/*: mpr(4) driver files. sys/modules/Makefile, sys/modules/mpr/Makefile: Add a module Makefile for the mpr(4) driver. sys/conf/files: Add the mpr(4) driver. sys/amd64/conf/GENERIC, sys/i386/conf/GENERIC, sys/mips/conf/OCTEON1, sys/sparc64/conf/GENERIC: Add the mpr(4) driver to all config files that currently have the mps(4) driver. sys/ia64/conf/GENERIC: Add the mps(4) and mpr(4) drivers to the ia64 GENERIC config file. sys/i386/conf/XEN: Exclude the mpr module from building here. Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> Tested by: Chris Reeves <chrisr@spectralogic.com> Sponsored by: LSI, Spectra Logic Relnotes: LSI 12Gb SAS driver mpr(4) added ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265237 | ken | 2014-05-02 14:36:20 -0600 (Fri, 02 May 2014) | 8 lines Add the mpr(4) man page to the man4 Makefile. This should have been included in r265236. Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> MFC after: 3 days Sponsored by: LSI, Spectra Logic ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265241 | brueffer | 2014-05-02 15:14:28 -0600 (Fri, 02 May 2014) | 2 lines Use our standard SYNOPSIS wording; perform some cleanup while here. ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265261 | brueffer | 2014-05-03 05:15:28 -0600 (Sat, 03 May 2014) | 2 lines Add a missing colon. ------------------------------------------------------------------------ Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> Tested by: Chris Reeves <chrisr@spectralogic.com> Sponsored by: LSI, Spectra Logic Relnotes: LSI 12Gb SAS driver mpr(4) added diff 265388 Mon May 05 20:43:36 MDT 2014 ken MFC the mpr(4) driver for LSI's 12Gb SAS cards. This includes r265236, r265237, r265241 and r265261: ------------------------------------------------------------------------ r265236 | ken | 2014-05-02 14:25:09 -0600 (Fri, 02 May 2014) | 51 lines Bring in the mpr(4) driver for LSI's MPT3 12Gb SAS controllers. This is derived from the mps(4) driver, but it supports only the 12Gb IT and IR hardware including the SAS 3004, SAS 3008 and SAS 3108. Some notes about this driver: o The 12Gb hardware can do "FastPath" I/O, and that capability is included in this driver. o WarpDrive functionality has been removed, since it isn't supported in the 12Gb driver interface. o The Scatter/Gather list handling code is significantly different between the 6Gb and 12Gb hardware. The 12Gb boards support IEEE Scatter/Gather lists. Thanks to LSI for developing and testing this driver for FreeBSD. share/man/man4/mpr.4: mpr(4) man page. sys/dev/mpr/*: mpr(4) driver files. sys/modules/Makefile, sys/modules/mpr/Makefile: Add a module Makefile for the mpr(4) driver. sys/conf/files: Add the mpr(4) driver. sys/amd64/conf/GENERIC, sys/i386/conf/GENERIC, sys/mips/conf/OCTEON1, sys/sparc64/conf/GENERIC: Add the mpr(4) driver to all config files that currently have the mps(4) driver. sys/ia64/conf/GENERIC: Add the mps(4) and mpr(4) drivers to the ia64 GENERIC config file. sys/i386/conf/XEN: Exclude the mpr module from building here. Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> Tested by: Chris Reeves <chrisr@spectralogic.com> Sponsored by: LSI, Spectra Logic Relnotes: LSI 12Gb SAS driver mpr(4) added ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265237 | ken | 2014-05-02 14:36:20 -0600 (Fri, 02 May 2014) | 8 lines Add the mpr(4) man page to the man4 Makefile. This should have been included in r265236. Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> MFC after: 3 days Sponsored by: LSI, Spectra Logic ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265241 | brueffer | 2014-05-02 15:14:28 -0600 (Fri, 02 May 2014) | 2 lines Use our standard SYNOPSIS wording; perform some cleanup while here. ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265261 | brueffer | 2014-05-03 05:15:28 -0600 (Sat, 03 May 2014) | 2 lines Add a missing colon. ------------------------------------------------------------------------ Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> Tested by: Chris Reeves <chrisr@spectralogic.com> Sponsored by: LSI, Spectra Logic Relnotes: LSI 12Gb SAS driver mpr(4) added diff 265388 Mon May 05 20:43:36 MDT 2014 ken MFC the mpr(4) driver for LSI's 12Gb SAS cards. This includes r265236, r265237, r265241 and r265261: ------------------------------------------------------------------------ r265236 | ken | 2014-05-02 14:25:09 -0600 (Fri, 02 May 2014) | 51 lines Bring in the mpr(4) driver for LSI's MPT3 12Gb SAS controllers. This is derived from the mps(4) driver, but it supports only the 12Gb IT and IR hardware including the SAS 3004, SAS 3008 and SAS 3108. Some notes about this driver: o The 12Gb hardware can do "FastPath" I/O, and that capability is included in this driver. o WarpDrive functionality has been removed, since it isn't supported in the 12Gb driver interface. o The Scatter/Gather list handling code is significantly different between the 6Gb and 12Gb hardware. The 12Gb boards support IEEE Scatter/Gather lists. Thanks to LSI for developing and testing this driver for FreeBSD. share/man/man4/mpr.4: mpr(4) man page. sys/dev/mpr/*: mpr(4) driver files. sys/modules/Makefile, sys/modules/mpr/Makefile: Add a module Makefile for the mpr(4) driver. sys/conf/files: Add the mpr(4) driver. sys/amd64/conf/GENERIC, sys/i386/conf/GENERIC, sys/mips/conf/OCTEON1, sys/sparc64/conf/GENERIC: Add the mpr(4) driver to all config files that currently have the mps(4) driver. sys/ia64/conf/GENERIC: Add the mps(4) and mpr(4) drivers to the ia64 GENERIC config file. sys/i386/conf/XEN: Exclude the mpr module from building here. Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> Tested by: Chris Reeves <chrisr@spectralogic.com> Sponsored by: LSI, Spectra Logic Relnotes: LSI 12Gb SAS driver mpr(4) added ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265237 | ken | 2014-05-02 14:36:20 -0600 (Fri, 02 May 2014) | 8 lines Add the mpr(4) man page to the man4 Makefile. This should have been included in r265236. Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> MFC after: 3 days Sponsored by: LSI, Spectra Logic ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265241 | brueffer | 2014-05-02 15:14:28 -0600 (Fri, 02 May 2014) | 2 lines Use our standard SYNOPSIS wording; perform some cleanup while here. ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265261 | brueffer | 2014-05-03 05:15:28 -0600 (Sat, 03 May 2014) | 2 lines Add a missing colon. ------------------------------------------------------------------------ Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> Tested by: Chris Reeves <chrisr@spectralogic.com> Sponsored by: LSI, Spectra Logic Relnotes: LSI 12Gb SAS driver mpr(4) added diff 265388 Mon May 05 20:43:36 MDT 2014 ken MFC the mpr(4) driver for LSI's 12Gb SAS cards. This includes r265236, r265237, r265241 and r265261: ------------------------------------------------------------------------ r265236 | ken | 2014-05-02 14:25:09 -0600 (Fri, 02 May 2014) | 51 lines Bring in the mpr(4) driver for LSI's MPT3 12Gb SAS controllers. This is derived from the mps(4) driver, but it supports only the 12Gb IT and IR hardware including the SAS 3004, SAS 3008 and SAS 3108. Some notes about this driver: o The 12Gb hardware can do "FastPath" I/O, and that capability is included in this driver. o WarpDrive functionality has been removed, since it isn't supported in the 12Gb driver interface. o The Scatter/Gather list handling code is significantly different between the 6Gb and 12Gb hardware. The 12Gb boards support IEEE Scatter/Gather lists. Thanks to LSI for developing and testing this driver for FreeBSD. share/man/man4/mpr.4: mpr(4) man page. sys/dev/mpr/*: mpr(4) driver files. sys/modules/Makefile, sys/modules/mpr/Makefile: Add a module Makefile for the mpr(4) driver. sys/conf/files: Add the mpr(4) driver. sys/amd64/conf/GENERIC, sys/i386/conf/GENERIC, sys/mips/conf/OCTEON1, sys/sparc64/conf/GENERIC: Add the mpr(4) driver to all config files that currently have the mps(4) driver. sys/ia64/conf/GENERIC: Add the mps(4) and mpr(4) drivers to the ia64 GENERIC config file. sys/i386/conf/XEN: Exclude the mpr module from building here. Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> Tested by: Chris Reeves <chrisr@spectralogic.com> Sponsored by: LSI, Spectra Logic Relnotes: LSI 12Gb SAS driver mpr(4) added ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265237 | ken | 2014-05-02 14:36:20 -0600 (Fri, 02 May 2014) | 8 lines Add the mpr(4) man page to the man4 Makefile. This should have been included in r265236. Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> MFC after: 3 days Sponsored by: LSI, Spectra Logic ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265241 | brueffer | 2014-05-02 15:14:28 -0600 (Fri, 02 May 2014) | 2 lines Use our standard SYNOPSIS wording; perform some cleanup while here. ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265261 | brueffer | 2014-05-03 05:15:28 -0600 (Sat, 03 May 2014) | 2 lines Add a missing colon. ------------------------------------------------------------------------ Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> Tested by: Chris Reeves <chrisr@spectralogic.com> Sponsored by: LSI, Spectra Logic Relnotes: LSI 12Gb SAS driver mpr(4) added diff 265388 Mon May 05 20:43:36 MDT 2014 ken MFC the mpr(4) driver for LSI's 12Gb SAS cards. This includes r265236, r265237, r265241 and r265261: ------------------------------------------------------------------------ r265236 | ken | 2014-05-02 14:25:09 -0600 (Fri, 02 May 2014) | 51 lines Bring in the mpr(4) driver for LSI's MPT3 12Gb SAS controllers. This is derived from the mps(4) driver, but it supports only the 12Gb IT and IR hardware including the SAS 3004, SAS 3008 and SAS 3108. Some notes about this driver: o The 12Gb hardware can do "FastPath" I/O, and that capability is included in this driver. o WarpDrive functionality has been removed, since it isn't supported in the 12Gb driver interface. o The Scatter/Gather list handling code is significantly different between the 6Gb and 12Gb hardware. The 12Gb boards support IEEE Scatter/Gather lists. Thanks to LSI for developing and testing this driver for FreeBSD. share/man/man4/mpr.4: mpr(4) man page. sys/dev/mpr/*: mpr(4) driver files. sys/modules/Makefile, sys/modules/mpr/Makefile: Add a module Makefile for the mpr(4) driver. sys/conf/files: Add the mpr(4) driver. sys/amd64/conf/GENERIC, sys/i386/conf/GENERIC, sys/mips/conf/OCTEON1, sys/sparc64/conf/GENERIC: Add the mpr(4) driver to all config files that currently have the mps(4) driver. sys/ia64/conf/GENERIC: Add the mps(4) and mpr(4) drivers to the ia64 GENERIC config file. sys/i386/conf/XEN: Exclude the mpr module from building here. Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> Tested by: Chris Reeves <chrisr@spectralogic.com> Sponsored by: LSI, Spectra Logic Relnotes: LSI 12Gb SAS driver mpr(4) added ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265237 | ken | 2014-05-02 14:36:20 -0600 (Fri, 02 May 2014) | 8 lines Add the mpr(4) man page to the man4 Makefile. This should have been included in r265236. Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> MFC after: 3 days Sponsored by: LSI, Spectra Logic ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265241 | brueffer | 2014-05-02 15:14:28 -0600 (Fri, 02 May 2014) | 2 lines Use our standard SYNOPSIS wording; perform some cleanup while here. ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265261 | brueffer | 2014-05-03 05:15:28 -0600 (Sat, 03 May 2014) | 2 lines Add a missing colon. ------------------------------------------------------------------------ Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> Tested by: Chris Reeves <chrisr@spectralogic.com> Sponsored by: LSI, Spectra Logic Relnotes: LSI 12Gb SAS driver mpr(4) added diff 265388 Mon May 05 20:43:36 MDT 2014 ken MFC the mpr(4) driver for LSI's 12Gb SAS cards. This includes r265236, r265237, r265241 and r265261: ------------------------------------------------------------------------ r265236 | ken | 2014-05-02 14:25:09 -0600 (Fri, 02 May 2014) | 51 lines Bring in the mpr(4) driver for LSI's MPT3 12Gb SAS controllers. This is derived from the mps(4) driver, but it supports only the 12Gb IT and IR hardware including the SAS 3004, SAS 3008 and SAS 3108. Some notes about this driver: o The 12Gb hardware can do "FastPath" I/O, and that capability is included in this driver. o WarpDrive functionality has been removed, since it isn't supported in the 12Gb driver interface. o The Scatter/Gather list handling code is significantly different between the 6Gb and 12Gb hardware. The 12Gb boards support IEEE Scatter/Gather lists. Thanks to LSI for developing and testing this driver for FreeBSD. share/man/man4/mpr.4: mpr(4) man page. sys/dev/mpr/*: mpr(4) driver files. sys/modules/Makefile, sys/modules/mpr/Makefile: Add a module Makefile for the mpr(4) driver. sys/conf/files: Add the mpr(4) driver. sys/amd64/conf/GENERIC, sys/i386/conf/GENERIC, sys/mips/conf/OCTEON1, sys/sparc64/conf/GENERIC: Add the mpr(4) driver to all config files that currently have the mps(4) driver. sys/ia64/conf/GENERIC: Add the mps(4) and mpr(4) drivers to the ia64 GENERIC config file. sys/i386/conf/XEN: Exclude the mpr module from building here. Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> Tested by: Chris Reeves <chrisr@spectralogic.com> Sponsored by: LSI, Spectra Logic Relnotes: LSI 12Gb SAS driver mpr(4) added ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265237 | ken | 2014-05-02 14:36:20 -0600 (Fri, 02 May 2014) | 8 lines Add the mpr(4) man page to the man4 Makefile. This should have been included in r265236. Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> MFC after: 3 days Sponsored by: LSI, Spectra Logic ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265241 | brueffer | 2014-05-02 15:14:28 -0600 (Fri, 02 May 2014) | 2 lines Use our standard SYNOPSIS wording; perform some cleanup while here. ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265261 | brueffer | 2014-05-03 05:15:28 -0600 (Sat, 03 May 2014) | 2 lines Add a missing colon. ------------------------------------------------------------------------ Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> Tested by: Chris Reeves <chrisr@spectralogic.com> Sponsored by: LSI, Spectra Logic Relnotes: LSI 12Gb SAS driver mpr(4) added |
| H A D | mpr_sas.h | diff 265388 Mon May 05 20:43:36 MDT 2014 ken MFC the mpr(4) driver for LSI's 12Gb SAS cards. This includes r265236, r265237, r265241 and r265261: ------------------------------------------------------------------------ r265236 | ken | 2014-05-02 14:25:09 -0600 (Fri, 02 May 2014) | 51 lines Bring in the mpr(4) driver for LSI's MPT3 12Gb SAS controllers. This is derived from the mps(4) driver, but it supports only the 12Gb IT and IR hardware including the SAS 3004, SAS 3008 and SAS 3108. Some notes about this driver: o The 12Gb hardware can do "FastPath" I/O, and that capability is included in this driver. o WarpDrive functionality has been removed, since it isn't supported in the 12Gb driver interface. o The Scatter/Gather list handling code is significantly different between the 6Gb and 12Gb hardware. The 12Gb boards support IEEE Scatter/Gather lists. Thanks to LSI for developing and testing this driver for FreeBSD. share/man/man4/mpr.4: mpr(4) man page. sys/dev/mpr/*: mpr(4) driver files. sys/modules/Makefile, sys/modules/mpr/Makefile: Add a module Makefile for the mpr(4) driver. sys/conf/files: Add the mpr(4) driver. sys/amd64/conf/GENERIC, sys/i386/conf/GENERIC, sys/mips/conf/OCTEON1, sys/sparc64/conf/GENERIC: Add the mpr(4) driver to all config files that currently have the mps(4) driver. sys/ia64/conf/GENERIC: Add the mps(4) and mpr(4) drivers to the ia64 GENERIC config file. sys/i386/conf/XEN: Exclude the mpr module from building here. Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> Tested by: Chris Reeves <chrisr@spectralogic.com> Sponsored by: LSI, Spectra Logic Relnotes: LSI 12Gb SAS driver mpr(4) added ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265237 | ken | 2014-05-02 14:36:20 -0600 (Fri, 02 May 2014) | 8 lines Add the mpr(4) man page to the man4 Makefile. This should have been included in r265236. Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> MFC after: 3 days Sponsored by: LSI, Spectra Logic ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265241 | brueffer | 2014-05-02 15:14:28 -0600 (Fri, 02 May 2014) | 2 lines Use our standard SYNOPSIS wording; perform some cleanup while here. ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265261 | brueffer | 2014-05-03 05:15:28 -0600 (Sat, 03 May 2014) | 2 lines Add a missing colon. ------------------------------------------------------------------------ Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> Tested by: Chris Reeves <chrisr@spectralogic.com> Sponsored by: LSI, Spectra Logic Relnotes: LSI 12Gb SAS driver mpr(4) added diff 265388 Mon May 05 20:43:36 MDT 2014 ken MFC the mpr(4) driver for LSI's 12Gb SAS cards. This includes r265236, r265237, r265241 and r265261: ------------------------------------------------------------------------ r265236 | ken | 2014-05-02 14:25:09 -0600 (Fri, 02 May 2014) | 51 lines Bring in the mpr(4) driver for LSI's MPT3 12Gb SAS controllers. This is derived from the mps(4) driver, but it supports only the 12Gb IT and IR hardware including the SAS 3004, SAS 3008 and SAS 3108. Some notes about this driver: o The 12Gb hardware can do "FastPath" I/O, and that capability is included in this driver. o WarpDrive functionality has been removed, since it isn't supported in the 12Gb driver interface. o The Scatter/Gather list handling code is significantly different between the 6Gb and 12Gb hardware. The 12Gb boards support IEEE Scatter/Gather lists. Thanks to LSI for developing and testing this driver for FreeBSD. share/man/man4/mpr.4: mpr(4) man page. sys/dev/mpr/*: mpr(4) driver files. sys/modules/Makefile, sys/modules/mpr/Makefile: Add a module Makefile for the mpr(4) driver. sys/conf/files: Add the mpr(4) driver. sys/amd64/conf/GENERIC, sys/i386/conf/GENERIC, sys/mips/conf/OCTEON1, sys/sparc64/conf/GENERIC: Add the mpr(4) driver to all config files that currently have the mps(4) driver. sys/ia64/conf/GENERIC: Add the mps(4) and mpr(4) drivers to the ia64 GENERIC config file. sys/i386/conf/XEN: Exclude the mpr module from building here. Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> Tested by: Chris Reeves <chrisr@spectralogic.com> Sponsored by: LSI, Spectra Logic Relnotes: LSI 12Gb SAS driver mpr(4) added ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265237 | ken | 2014-05-02 14:36:20 -0600 (Fri, 02 May 2014) | 8 lines Add the mpr(4) man page to the man4 Makefile. This should have been included in r265236. Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> MFC after: 3 days Sponsored by: LSI, Spectra Logic ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265241 | brueffer | 2014-05-02 15:14:28 -0600 (Fri, 02 May 2014) | 2 lines Use our standard SYNOPSIS wording; perform some cleanup while here. ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265261 | brueffer | 2014-05-03 05:15:28 -0600 (Sat, 03 May 2014) | 2 lines Add a missing colon. ------------------------------------------------------------------------ Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> Tested by: Chris Reeves <chrisr@spectralogic.com> Sponsored by: LSI, Spectra Logic Relnotes: LSI 12Gb SAS driver mpr(4) added diff 265388 Mon May 05 20:43:36 MDT 2014 ken MFC the mpr(4) driver for LSI's 12Gb SAS cards. This includes r265236, r265237, r265241 and r265261: ------------------------------------------------------------------------ r265236 | ken | 2014-05-02 14:25:09 -0600 (Fri, 02 May 2014) | 51 lines Bring in the mpr(4) driver for LSI's MPT3 12Gb SAS controllers. This is derived from the mps(4) driver, but it supports only the 12Gb IT and IR hardware including the SAS 3004, SAS 3008 and SAS 3108. Some notes about this driver: o The 12Gb hardware can do "FastPath" I/O, and that capability is included in this driver. o WarpDrive functionality has been removed, since it isn't supported in the 12Gb driver interface. o The Scatter/Gather list handling code is significantly different between the 6Gb and 12Gb hardware. The 12Gb boards support IEEE Scatter/Gather lists. Thanks to LSI for developing and testing this driver for FreeBSD. share/man/man4/mpr.4: mpr(4) man page. sys/dev/mpr/*: mpr(4) driver files. sys/modules/Makefile, sys/modules/mpr/Makefile: Add a module Makefile for the mpr(4) driver. sys/conf/files: Add the mpr(4) driver. sys/amd64/conf/GENERIC, sys/i386/conf/GENERIC, sys/mips/conf/OCTEON1, sys/sparc64/conf/GENERIC: Add the mpr(4) driver to all config files that currently have the mps(4) driver. sys/ia64/conf/GENERIC: Add the mps(4) and mpr(4) drivers to the ia64 GENERIC config file. sys/i386/conf/XEN: Exclude the mpr module from building here. Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> Tested by: Chris Reeves <chrisr@spectralogic.com> Sponsored by: LSI, Spectra Logic Relnotes: LSI 12Gb SAS driver mpr(4) added ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265237 | ken | 2014-05-02 14:36:20 -0600 (Fri, 02 May 2014) | 8 lines Add the mpr(4) man page to the man4 Makefile. This should have been included in r265236. Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> MFC after: 3 days Sponsored by: LSI, Spectra Logic ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265241 | brueffer | 2014-05-02 15:14:28 -0600 (Fri, 02 May 2014) | 2 lines Use our standard SYNOPSIS wording; perform some cleanup while here. ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265261 | brueffer | 2014-05-03 05:15:28 -0600 (Sat, 03 May 2014) | 2 lines Add a missing colon. ------------------------------------------------------------------------ Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> Tested by: Chris Reeves <chrisr@spectralogic.com> Sponsored by: LSI, Spectra Logic Relnotes: LSI 12Gb SAS driver mpr(4) added diff 265388 Mon May 05 20:43:36 MDT 2014 ken MFC the mpr(4) driver for LSI's 12Gb SAS cards. This includes r265236, r265237, r265241 and r265261: ------------------------------------------------------------------------ r265236 | ken | 2014-05-02 14:25:09 -0600 (Fri, 02 May 2014) | 51 lines Bring in the mpr(4) driver for LSI's MPT3 12Gb SAS controllers. This is derived from the mps(4) driver, but it supports only the 12Gb IT and IR hardware including the SAS 3004, SAS 3008 and SAS 3108. Some notes about this driver: o The 12Gb hardware can do "FastPath" I/O, and that capability is included in this driver. o WarpDrive functionality has been removed, since it isn't supported in the 12Gb driver interface. o The Scatter/Gather list handling code is significantly different between the 6Gb and 12Gb hardware. The 12Gb boards support IEEE Scatter/Gather lists. Thanks to LSI for developing and testing this driver for FreeBSD. share/man/man4/mpr.4: mpr(4) man page. sys/dev/mpr/*: mpr(4) driver files. sys/modules/Makefile, sys/modules/mpr/Makefile: Add a module Makefile for the mpr(4) driver. sys/conf/files: Add the mpr(4) driver. sys/amd64/conf/GENERIC, sys/i386/conf/GENERIC, sys/mips/conf/OCTEON1, sys/sparc64/conf/GENERIC: Add the mpr(4) driver to all config files that currently have the mps(4) driver. sys/ia64/conf/GENERIC: Add the mps(4) and mpr(4) drivers to the ia64 GENERIC config file. sys/i386/conf/XEN: Exclude the mpr module from building here. Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> Tested by: Chris Reeves <chrisr@spectralogic.com> Sponsored by: LSI, Spectra Logic Relnotes: LSI 12Gb SAS driver mpr(4) added ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265237 | ken | 2014-05-02 14:36:20 -0600 (Fri, 02 May 2014) | 8 lines Add the mpr(4) man page to the man4 Makefile. This should have been included in r265236. Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> MFC after: 3 days Sponsored by: LSI, Spectra Logic ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265241 | brueffer | 2014-05-02 15:14:28 -0600 (Fri, 02 May 2014) | 2 lines Use our standard SYNOPSIS wording; perform some cleanup while here. ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265261 | brueffer | 2014-05-03 05:15:28 -0600 (Sat, 03 May 2014) | 2 lines Add a missing colon. ------------------------------------------------------------------------ Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> Tested by: Chris Reeves <chrisr@spectralogic.com> Sponsored by: LSI, Spectra Logic Relnotes: LSI 12Gb SAS driver mpr(4) added diff 265388 Mon May 05 20:43:36 MDT 2014 ken MFC the mpr(4) driver for LSI's 12Gb SAS cards. This includes r265236, r265237, r265241 and r265261: ------------------------------------------------------------------------ r265236 | ken | 2014-05-02 14:25:09 -0600 (Fri, 02 May 2014) | 51 lines Bring in the mpr(4) driver for LSI's MPT3 12Gb SAS controllers. This is derived from the mps(4) driver, but it supports only the 12Gb IT and IR hardware including the SAS 3004, SAS 3008 and SAS 3108. Some notes about this driver: o The 12Gb hardware can do "FastPath" I/O, and that capability is included in this driver. o WarpDrive functionality has been removed, since it isn't supported in the 12Gb driver interface. o The Scatter/Gather list handling code is significantly different between the 6Gb and 12Gb hardware. The 12Gb boards support IEEE Scatter/Gather lists. Thanks to LSI for developing and testing this driver for FreeBSD. share/man/man4/mpr.4: mpr(4) man page. sys/dev/mpr/*: mpr(4) driver files. sys/modules/Makefile, sys/modules/mpr/Makefile: Add a module Makefile for the mpr(4) driver. sys/conf/files: Add the mpr(4) driver. sys/amd64/conf/GENERIC, sys/i386/conf/GENERIC, sys/mips/conf/OCTEON1, sys/sparc64/conf/GENERIC: Add the mpr(4) driver to all config files that currently have the mps(4) driver. sys/ia64/conf/GENERIC: Add the mps(4) and mpr(4) drivers to the ia64 GENERIC config file. sys/i386/conf/XEN: Exclude the mpr module from building here. Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> Tested by: Chris Reeves <chrisr@spectralogic.com> Sponsored by: LSI, Spectra Logic Relnotes: LSI 12Gb SAS driver mpr(4) added ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265237 | ken | 2014-05-02 14:36:20 -0600 (Fri, 02 May 2014) | 8 lines Add the mpr(4) man page to the man4 Makefile. This should have been included in r265236. Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> MFC after: 3 days Sponsored by: LSI, Spectra Logic ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265241 | brueffer | 2014-05-02 15:14:28 -0600 (Fri, 02 May 2014) | 2 lines Use our standard SYNOPSIS wording; perform some cleanup while here. ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265261 | brueffer | 2014-05-03 05:15:28 -0600 (Sat, 03 May 2014) | 2 lines Add a missing colon. ------------------------------------------------------------------------ Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> Tested by: Chris Reeves <chrisr@spectralogic.com> Sponsored by: LSI, Spectra Logic Relnotes: LSI 12Gb SAS driver mpr(4) added diff 265388 Mon May 05 20:43:36 MDT 2014 ken MFC the mpr(4) driver for LSI's 12Gb SAS cards. This includes r265236, r265237, r265241 and r265261: ------------------------------------------------------------------------ r265236 | ken | 2014-05-02 14:25:09 -0600 (Fri, 02 May 2014) | 51 lines Bring in the mpr(4) driver for LSI's MPT3 12Gb SAS controllers. This is derived from the mps(4) driver, but it supports only the 12Gb IT and IR hardware including the SAS 3004, SAS 3008 and SAS 3108. Some notes about this driver: o The 12Gb hardware can do "FastPath" I/O, and that capability is included in this driver. o WarpDrive functionality has been removed, since it isn't supported in the 12Gb driver interface. o The Scatter/Gather list handling code is significantly different between the 6Gb and 12Gb hardware. The 12Gb boards support IEEE Scatter/Gather lists. Thanks to LSI for developing and testing this driver for FreeBSD. share/man/man4/mpr.4: mpr(4) man page. sys/dev/mpr/*: mpr(4) driver files. sys/modules/Makefile, sys/modules/mpr/Makefile: Add a module Makefile for the mpr(4) driver. sys/conf/files: Add the mpr(4) driver. sys/amd64/conf/GENERIC, sys/i386/conf/GENERIC, sys/mips/conf/OCTEON1, sys/sparc64/conf/GENERIC: Add the mpr(4) driver to all config files that currently have the mps(4) driver. sys/ia64/conf/GENERIC: Add the mps(4) and mpr(4) drivers to the ia64 GENERIC config file. sys/i386/conf/XEN: Exclude the mpr module from building here. Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> Tested by: Chris Reeves <chrisr@spectralogic.com> Sponsored by: LSI, Spectra Logic Relnotes: LSI 12Gb SAS driver mpr(4) added ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265237 | ken | 2014-05-02 14:36:20 -0600 (Fri, 02 May 2014) | 8 lines Add the mpr(4) man page to the man4 Makefile. This should have been included in r265236. Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> MFC after: 3 days Sponsored by: LSI, Spectra Logic ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265241 | brueffer | 2014-05-02 15:14:28 -0600 (Fri, 02 May 2014) | 2 lines Use our standard SYNOPSIS wording; perform some cleanup while here. ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265261 | brueffer | 2014-05-03 05:15:28 -0600 (Sat, 03 May 2014) | 2 lines Add a missing colon. ------------------------------------------------------------------------ Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> Tested by: Chris Reeves <chrisr@spectralogic.com> Sponsored by: LSI, Spectra Logic Relnotes: LSI 12Gb SAS driver mpr(4) added diff 265388 Mon May 05 20:43:36 MDT 2014 ken MFC the mpr(4) driver for LSI's 12Gb SAS cards. This includes r265236, r265237, r265241 and r265261: ------------------------------------------------------------------------ r265236 | ken | 2014-05-02 14:25:09 -0600 (Fri, 02 May 2014) | 51 lines Bring in the mpr(4) driver for LSI's MPT3 12Gb SAS controllers. This is derived from the mps(4) driver, but it supports only the 12Gb IT and IR hardware including the SAS 3004, SAS 3008 and SAS 3108. Some notes about this driver: o The 12Gb hardware can do "FastPath" I/O, and that capability is included in this driver. o WarpDrive functionality has been removed, since it isn't supported in the 12Gb driver interface. o The Scatter/Gather list handling code is significantly different between the 6Gb and 12Gb hardware. The 12Gb boards support IEEE Scatter/Gather lists. Thanks to LSI for developing and testing this driver for FreeBSD. share/man/man4/mpr.4: mpr(4) man page. sys/dev/mpr/*: mpr(4) driver files. sys/modules/Makefile, sys/modules/mpr/Makefile: Add a module Makefile for the mpr(4) driver. sys/conf/files: Add the mpr(4) driver. sys/amd64/conf/GENERIC, sys/i386/conf/GENERIC, sys/mips/conf/OCTEON1, sys/sparc64/conf/GENERIC: Add the mpr(4) driver to all config files that currently have the mps(4) driver. sys/ia64/conf/GENERIC: Add the mps(4) and mpr(4) drivers to the ia64 GENERIC config file. sys/i386/conf/XEN: Exclude the mpr module from building here. Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> Tested by: Chris Reeves <chrisr@spectralogic.com> Sponsored by: LSI, Spectra Logic Relnotes: LSI 12Gb SAS driver mpr(4) added ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265237 | ken | 2014-05-02 14:36:20 -0600 (Fri, 02 May 2014) | 8 lines Add the mpr(4) man page to the man4 Makefile. This should have been included in r265236. Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> MFC after: 3 days Sponsored by: LSI, Spectra Logic ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265241 | brueffer | 2014-05-02 15:14:28 -0600 (Fri, 02 May 2014) | 2 lines Use our standard SYNOPSIS wording; perform some cleanup while here. ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265261 | brueffer | 2014-05-03 05:15:28 -0600 (Sat, 03 May 2014) | 2 lines Add a missing colon. ------------------------------------------------------------------------ Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> Tested by: Chris Reeves <chrisr@spectralogic.com> Sponsored by: LSI, Spectra Logic Relnotes: LSI 12Gb SAS driver mpr(4) added diff 265388 Mon May 05 20:43:36 MDT 2014 ken MFC the mpr(4) driver for LSI's 12Gb SAS cards. This includes r265236, r265237, r265241 and r265261: ------------------------------------------------------------------------ r265236 | ken | 2014-05-02 14:25:09 -0600 (Fri, 02 May 2014) | 51 lines Bring in the mpr(4) driver for LSI's MPT3 12Gb SAS controllers. This is derived from the mps(4) driver, but it supports only the 12Gb IT and IR hardware including the SAS 3004, SAS 3008 and SAS 3108. Some notes about this driver: o The 12Gb hardware can do "FastPath" I/O, and that capability is included in this driver. o WarpDrive functionality has been removed, since it isn't supported in the 12Gb driver interface. o The Scatter/Gather list handling code is significantly different between the 6Gb and 12Gb hardware. The 12Gb boards support IEEE Scatter/Gather lists. Thanks to LSI for developing and testing this driver for FreeBSD. share/man/man4/mpr.4: mpr(4) man page. sys/dev/mpr/*: mpr(4) driver files. sys/modules/Makefile, sys/modules/mpr/Makefile: Add a module Makefile for the mpr(4) driver. sys/conf/files: Add the mpr(4) driver. sys/amd64/conf/GENERIC, sys/i386/conf/GENERIC, sys/mips/conf/OCTEON1, sys/sparc64/conf/GENERIC: Add the mpr(4) driver to all config files that currently have the mps(4) driver. sys/ia64/conf/GENERIC: Add the mps(4) and mpr(4) drivers to the ia64 GENERIC config file. sys/i386/conf/XEN: Exclude the mpr module from building here. Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> Tested by: Chris Reeves <chrisr@spectralogic.com> Sponsored by: LSI, Spectra Logic Relnotes: LSI 12Gb SAS driver mpr(4) added ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265237 | ken | 2014-05-02 14:36:20 -0600 (Fri, 02 May 2014) | 8 lines Add the mpr(4) man page to the man4 Makefile. This should have been included in r265236. Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> MFC after: 3 days Sponsored by: LSI, Spectra Logic ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265241 | brueffer | 2014-05-02 15:14:28 -0600 (Fri, 02 May 2014) | 2 lines Use our standard SYNOPSIS wording; perform some cleanup while here. ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265261 | brueffer | 2014-05-03 05:15:28 -0600 (Sat, 03 May 2014) | 2 lines Add a missing colon. ------------------------------------------------------------------------ Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> Tested by: Chris Reeves <chrisr@spectralogic.com> Sponsored by: LSI, Spectra Logic Relnotes: LSI 12Gb SAS driver mpr(4) added diff 265388 Mon May 05 20:43:36 MDT 2014 ken MFC the mpr(4) driver for LSI's 12Gb SAS cards. This includes r265236, r265237, r265241 and r265261: ------------------------------------------------------------------------ r265236 | ken | 2014-05-02 14:25:09 -0600 (Fri, 02 May 2014) | 51 lines Bring in the mpr(4) driver for LSI's MPT3 12Gb SAS controllers. This is derived from the mps(4) driver, but it supports only the 12Gb IT and IR hardware including the SAS 3004, SAS 3008 and SAS 3108. Some notes about this driver: o The 12Gb hardware can do "FastPath" I/O, and that capability is included in this driver. o WarpDrive functionality has been removed, since it isn't supported in the 12Gb driver interface. o The Scatter/Gather list handling code is significantly different between the 6Gb and 12Gb hardware. The 12Gb boards support IEEE Scatter/Gather lists. Thanks to LSI for developing and testing this driver for FreeBSD. share/man/man4/mpr.4: mpr(4) man page. sys/dev/mpr/*: mpr(4) driver files. sys/modules/Makefile, sys/modules/mpr/Makefile: Add a module Makefile for the mpr(4) driver. sys/conf/files: Add the mpr(4) driver. sys/amd64/conf/GENERIC, sys/i386/conf/GENERIC, sys/mips/conf/OCTEON1, sys/sparc64/conf/GENERIC: Add the mpr(4) driver to all config files that currently have the mps(4) driver. sys/ia64/conf/GENERIC: Add the mps(4) and mpr(4) drivers to the ia64 GENERIC config file. sys/i386/conf/XEN: Exclude the mpr module from building here. Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> Tested by: Chris Reeves <chrisr@spectralogic.com> Sponsored by: LSI, Spectra Logic Relnotes: LSI 12Gb SAS driver mpr(4) added ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265237 | ken | 2014-05-02 14:36:20 -0600 (Fri, 02 May 2014) | 8 lines Add the mpr(4) man page to the man4 Makefile. This should have been included in r265236. Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> MFC after: 3 days Sponsored by: LSI, Spectra Logic ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265241 | brueffer | 2014-05-02 15:14:28 -0600 (Fri, 02 May 2014) | 2 lines Use our standard SYNOPSIS wording; perform some cleanup while here. ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265261 | brueffer | 2014-05-03 05:15:28 -0600 (Sat, 03 May 2014) | 2 lines Add a missing colon. ------------------------------------------------------------------------ Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> Tested by: Chris Reeves <chrisr@spectralogic.com> Sponsored by: LSI, Spectra Logic Relnotes: LSI 12Gb SAS driver mpr(4) added diff 265388 Mon May 05 20:43:36 MDT 2014 ken MFC the mpr(4) driver for LSI's 12Gb SAS cards. This includes r265236, r265237, r265241 and r265261: ------------------------------------------------------------------------ r265236 | ken | 2014-05-02 14:25:09 -0600 (Fri, 02 May 2014) | 51 lines Bring in the mpr(4) driver for LSI's MPT3 12Gb SAS controllers. This is derived from the mps(4) driver, but it supports only the 12Gb IT and IR hardware including the SAS 3004, SAS 3008 and SAS 3108. Some notes about this driver: o The 12Gb hardware can do "FastPath" I/O, and that capability is included in this driver. o WarpDrive functionality has been removed, since it isn't supported in the 12Gb driver interface. o The Scatter/Gather list handling code is significantly different between the 6Gb and 12Gb hardware. The 12Gb boards support IEEE Scatter/Gather lists. Thanks to LSI for developing and testing this driver for FreeBSD. share/man/man4/mpr.4: mpr(4) man page. sys/dev/mpr/*: mpr(4) driver files. sys/modules/Makefile, sys/modules/mpr/Makefile: Add a module Makefile for the mpr(4) driver. sys/conf/files: Add the mpr(4) driver. sys/amd64/conf/GENERIC, sys/i386/conf/GENERIC, sys/mips/conf/OCTEON1, sys/sparc64/conf/GENERIC: Add the mpr(4) driver to all config files that currently have the mps(4) driver. sys/ia64/conf/GENERIC: Add the mps(4) and mpr(4) drivers to the ia64 GENERIC config file. sys/i386/conf/XEN: Exclude the mpr module from building here. Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> Tested by: Chris Reeves <chrisr@spectralogic.com> Sponsored by: LSI, Spectra Logic Relnotes: LSI 12Gb SAS driver mpr(4) added ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265237 | ken | 2014-05-02 14:36:20 -0600 (Fri, 02 May 2014) | 8 lines Add the mpr(4) man page to the man4 Makefile. This should have been included in r265236. Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> MFC after: 3 days Sponsored by: LSI, Spectra Logic ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265241 | brueffer | 2014-05-02 15:14:28 -0600 (Fri, 02 May 2014) | 2 lines Use our standard SYNOPSIS wording; perform some cleanup while here. ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265261 | brueffer | 2014-05-03 05:15:28 -0600 (Sat, 03 May 2014) | 2 lines Add a missing colon. ------------------------------------------------------------------------ Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> Tested by: Chris Reeves <chrisr@spectralogic.com> Sponsored by: LSI, Spectra Logic Relnotes: LSI 12Gb SAS driver mpr(4) added diff 265388 Mon May 05 20:43:36 MDT 2014 ken MFC the mpr(4) driver for LSI's 12Gb SAS cards. This includes r265236, r265237, r265241 and r265261: ------------------------------------------------------------------------ r265236 | ken | 2014-05-02 14:25:09 -0600 (Fri, 02 May 2014) | 51 lines Bring in the mpr(4) driver for LSI's MPT3 12Gb SAS controllers. This is derived from the mps(4) driver, but it supports only the 12Gb IT and IR hardware including the SAS 3004, SAS 3008 and SAS 3108. Some notes about this driver: o The 12Gb hardware can do "FastPath" I/O, and that capability is included in this driver. o WarpDrive functionality has been removed, since it isn't supported in the 12Gb driver interface. o The Scatter/Gather list handling code is significantly different between the 6Gb and 12Gb hardware. The 12Gb boards support IEEE Scatter/Gather lists. Thanks to LSI for developing and testing this driver for FreeBSD. share/man/man4/mpr.4: mpr(4) man page. sys/dev/mpr/*: mpr(4) driver files. sys/modules/Makefile, sys/modules/mpr/Makefile: Add a module Makefile for the mpr(4) driver. sys/conf/files: Add the mpr(4) driver. sys/amd64/conf/GENERIC, sys/i386/conf/GENERIC, sys/mips/conf/OCTEON1, sys/sparc64/conf/GENERIC: Add the mpr(4) driver to all config files that currently have the mps(4) driver. sys/ia64/conf/GENERIC: Add the mps(4) and mpr(4) drivers to the ia64 GENERIC config file. sys/i386/conf/XEN: Exclude the mpr module from building here. Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> Tested by: Chris Reeves <chrisr@spectralogic.com> Sponsored by: LSI, Spectra Logic Relnotes: LSI 12Gb SAS driver mpr(4) added ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265237 | ken | 2014-05-02 14:36:20 -0600 (Fri, 02 May 2014) | 8 lines Add the mpr(4) man page to the man4 Makefile. This should have been included in r265236. Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> MFC after: 3 days Sponsored by: LSI, Spectra Logic ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265241 | brueffer | 2014-05-02 15:14:28 -0600 (Fri, 02 May 2014) | 2 lines Use our standard SYNOPSIS wording; perform some cleanup while here. ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265261 | brueffer | 2014-05-03 05:15:28 -0600 (Sat, 03 May 2014) | 2 lines Add a missing colon. ------------------------------------------------------------------------ Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> Tested by: Chris Reeves <chrisr@spectralogic.com> Sponsored by: LSI, Spectra Logic Relnotes: LSI 12Gb SAS driver mpr(4) added diff 265388 Mon May 05 20:43:36 MDT 2014 ken MFC the mpr(4) driver for LSI's 12Gb SAS cards. This includes r265236, r265237, r265241 and r265261: ------------------------------------------------------------------------ r265236 | ken | 2014-05-02 14:25:09 -0600 (Fri, 02 May 2014) | 51 lines Bring in the mpr(4) driver for LSI's MPT3 12Gb SAS controllers. This is derived from the mps(4) driver, but it supports only the 12Gb IT and IR hardware including the SAS 3004, SAS 3008 and SAS 3108. Some notes about this driver: o The 12Gb hardware can do "FastPath" I/O, and that capability is included in this driver. o WarpDrive functionality has been removed, since it isn't supported in the 12Gb driver interface. o The Scatter/Gather list handling code is significantly different between the 6Gb and 12Gb hardware. The 12Gb boards support IEEE Scatter/Gather lists. Thanks to LSI for developing and testing this driver for FreeBSD. share/man/man4/mpr.4: mpr(4) man page. sys/dev/mpr/*: mpr(4) driver files. sys/modules/Makefile, sys/modules/mpr/Makefile: Add a module Makefile for the mpr(4) driver. sys/conf/files: Add the mpr(4) driver. sys/amd64/conf/GENERIC, sys/i386/conf/GENERIC, sys/mips/conf/OCTEON1, sys/sparc64/conf/GENERIC: Add the mpr(4) driver to all config files that currently have the mps(4) driver. sys/ia64/conf/GENERIC: Add the mps(4) and mpr(4) drivers to the ia64 GENERIC config file. sys/i386/conf/XEN: Exclude the mpr module from building here. Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> Tested by: Chris Reeves <chrisr@spectralogic.com> Sponsored by: LSI, Spectra Logic Relnotes: LSI 12Gb SAS driver mpr(4) added ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265237 | ken | 2014-05-02 14:36:20 -0600 (Fri, 02 May 2014) | 8 lines Add the mpr(4) man page to the man4 Makefile. This should have been included in r265236. Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> MFC after: 3 days Sponsored by: LSI, Spectra Logic ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265241 | brueffer | 2014-05-02 15:14:28 -0600 (Fri, 02 May 2014) | 2 lines Use our standard SYNOPSIS wording; perform some cleanup while here. ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265261 | brueffer | 2014-05-03 05:15:28 -0600 (Sat, 03 May 2014) | 2 lines Add a missing colon. ------------------------------------------------------------------------ Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> Tested by: Chris Reeves <chrisr@spectralogic.com> Sponsored by: LSI, Spectra Logic Relnotes: LSI 12Gb SAS driver mpr(4) added diff 265388 Mon May 05 20:43:36 MDT 2014 ken MFC the mpr(4) driver for LSI's 12Gb SAS cards. This includes r265236, r265237, r265241 and r265261: ------------------------------------------------------------------------ r265236 | ken | 2014-05-02 14:25:09 -0600 (Fri, 02 May 2014) | 51 lines Bring in the mpr(4) driver for LSI's MPT3 12Gb SAS controllers. This is derived from the mps(4) driver, but it supports only the 12Gb IT and IR hardware including the SAS 3004, SAS 3008 and SAS 3108. Some notes about this driver: o The 12Gb hardware can do "FastPath" I/O, and that capability is included in this driver. o WarpDrive functionality has been removed, since it isn't supported in the 12Gb driver interface. o The Scatter/Gather list handling code is significantly different between the 6Gb and 12Gb hardware. The 12Gb boards support IEEE Scatter/Gather lists. Thanks to LSI for developing and testing this driver for FreeBSD. share/man/man4/mpr.4: mpr(4) man page. sys/dev/mpr/*: mpr(4) driver files. sys/modules/Makefile, sys/modules/mpr/Makefile: Add a module Makefile for the mpr(4) driver. sys/conf/files: Add the mpr(4) driver. sys/amd64/conf/GENERIC, sys/i386/conf/GENERIC, sys/mips/conf/OCTEON1, sys/sparc64/conf/GENERIC: Add the mpr(4) driver to all config files that currently have the mps(4) driver. sys/ia64/conf/GENERIC: Add the mps(4) and mpr(4) drivers to the ia64 GENERIC config file. sys/i386/conf/XEN: Exclude the mpr module from building here. Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> Tested by: Chris Reeves <chrisr@spectralogic.com> Sponsored by: LSI, Spectra Logic Relnotes: LSI 12Gb SAS driver mpr(4) added ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265237 | ken | 2014-05-02 14:36:20 -0600 (Fri, 02 May 2014) | 8 lines Add the mpr(4) man page to the man4 Makefile. This should have been included in r265236. Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> MFC after: 3 days Sponsored by: LSI, Spectra Logic ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265241 | brueffer | 2014-05-02 15:14:28 -0600 (Fri, 02 May 2014) | 2 lines Use our standard SYNOPSIS wording; perform some cleanup while here. ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265261 | brueffer | 2014-05-03 05:15:28 -0600 (Sat, 03 May 2014) | 2 lines Add a missing colon. ------------------------------------------------------------------------ Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> Tested by: Chris Reeves <chrisr@spectralogic.com> Sponsored by: LSI, Spectra Logic Relnotes: LSI 12Gb SAS driver mpr(4) added diff 265388 Mon May 05 20:43:36 MDT 2014 ken MFC the mpr(4) driver for LSI's 12Gb SAS cards. This includes r265236, r265237, r265241 and r265261: ------------------------------------------------------------------------ r265236 | ken | 2014-05-02 14:25:09 -0600 (Fri, 02 May 2014) | 51 lines Bring in the mpr(4) driver for LSI's MPT3 12Gb SAS controllers. This is derived from the mps(4) driver, but it supports only the 12Gb IT and IR hardware including the SAS 3004, SAS 3008 and SAS 3108. Some notes about this driver: o The 12Gb hardware can do "FastPath" I/O, and that capability is included in this driver. o WarpDrive functionality has been removed, since it isn't supported in the 12Gb driver interface. o The Scatter/Gather list handling code is significantly different between the 6Gb and 12Gb hardware. The 12Gb boards support IEEE Scatter/Gather lists. Thanks to LSI for developing and testing this driver for FreeBSD. share/man/man4/mpr.4: mpr(4) man page. sys/dev/mpr/*: mpr(4) driver files. sys/modules/Makefile, sys/modules/mpr/Makefile: Add a module Makefile for the mpr(4) driver. sys/conf/files: Add the mpr(4) driver. sys/amd64/conf/GENERIC, sys/i386/conf/GENERIC, sys/mips/conf/OCTEON1, sys/sparc64/conf/GENERIC: Add the mpr(4) driver to all config files that currently have the mps(4) driver. sys/ia64/conf/GENERIC: Add the mps(4) and mpr(4) drivers to the ia64 GENERIC config file. sys/i386/conf/XEN: Exclude the mpr module from building here. Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> Tested by: Chris Reeves <chrisr@spectralogic.com> Sponsored by: LSI, Spectra Logic Relnotes: LSI 12Gb SAS driver mpr(4) added ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265237 | ken | 2014-05-02 14:36:20 -0600 (Fri, 02 May 2014) | 8 lines Add the mpr(4) man page to the man4 Makefile. This should have been included in r265236. Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> MFC after: 3 days Sponsored by: LSI, Spectra Logic ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265241 | brueffer | 2014-05-02 15:14:28 -0600 (Fri, 02 May 2014) | 2 lines Use our standard SYNOPSIS wording; perform some cleanup while here. ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265261 | brueffer | 2014-05-03 05:15:28 -0600 (Sat, 03 May 2014) | 2 lines Add a missing colon. ------------------------------------------------------------------------ Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> Tested by: Chris Reeves <chrisr@spectralogic.com> Sponsored by: LSI, Spectra Logic Relnotes: LSI 12Gb SAS driver mpr(4) added diff 265388 Mon May 05 20:43:36 MDT 2014 ken MFC the mpr(4) driver for LSI's 12Gb SAS cards. This includes r265236, r265237, r265241 and r265261: ------------------------------------------------------------------------ r265236 | ken | 2014-05-02 14:25:09 -0600 (Fri, 02 May 2014) | 51 lines Bring in the mpr(4) driver for LSI's MPT3 12Gb SAS controllers. This is derived from the mps(4) driver, but it supports only the 12Gb IT and IR hardware including the SAS 3004, SAS 3008 and SAS 3108. Some notes about this driver: o The 12Gb hardware can do "FastPath" I/O, and that capability is included in this driver. o WarpDrive functionality has been removed, since it isn't supported in the 12Gb driver interface. o The Scatter/Gather list handling code is significantly different between the 6Gb and 12Gb hardware. The 12Gb boards support IEEE Scatter/Gather lists. Thanks to LSI for developing and testing this driver for FreeBSD. share/man/man4/mpr.4: mpr(4) man page. sys/dev/mpr/*: mpr(4) driver files. sys/modules/Makefile, sys/modules/mpr/Makefile: Add a module Makefile for the mpr(4) driver. sys/conf/files: Add the mpr(4) driver. sys/amd64/conf/GENERIC, sys/i386/conf/GENERIC, sys/mips/conf/OCTEON1, sys/sparc64/conf/GENERIC: Add the mpr(4) driver to all config files that currently have the mps(4) driver. sys/ia64/conf/GENERIC: Add the mps(4) and mpr(4) drivers to the ia64 GENERIC config file. sys/i386/conf/XEN: Exclude the mpr module from building here. Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> Tested by: Chris Reeves <chrisr@spectralogic.com> Sponsored by: LSI, Spectra Logic Relnotes: LSI 12Gb SAS driver mpr(4) added ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265237 | ken | 2014-05-02 14:36:20 -0600 (Fri, 02 May 2014) | 8 lines Add the mpr(4) man page to the man4 Makefile. This should have been included in r265236. Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> MFC after: 3 days Sponsored by: LSI, Spectra Logic ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265241 | brueffer | 2014-05-02 15:14:28 -0600 (Fri, 02 May 2014) | 2 lines Use our standard SYNOPSIS wording; perform some cleanup while here. ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265261 | brueffer | 2014-05-03 05:15:28 -0600 (Sat, 03 May 2014) | 2 lines Add a missing colon. ------------------------------------------------------------------------ Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> Tested by: Chris Reeves <chrisr@spectralogic.com> Sponsored by: LSI, Spectra Logic Relnotes: LSI 12Gb SAS driver mpr(4) added |
| H A D | mprvar.h | diff 265388 Mon May 05 20:43:36 MDT 2014 ken MFC the mpr(4) driver for LSI's 12Gb SAS cards. This includes r265236, r265237, r265241 and r265261: ------------------------------------------------------------------------ r265236 | ken | 2014-05-02 14:25:09 -0600 (Fri, 02 May 2014) | 51 lines Bring in the mpr(4) driver for LSI's MPT3 12Gb SAS controllers. This is derived from the mps(4) driver, but it supports only the 12Gb IT and IR hardware including the SAS 3004, SAS 3008 and SAS 3108. Some notes about this driver: o The 12Gb hardware can do "FastPath" I/O, and that capability is included in this driver. o WarpDrive functionality has been removed, since it isn't supported in the 12Gb driver interface. o The Scatter/Gather list handling code is significantly different between the 6Gb and 12Gb hardware. The 12Gb boards support IEEE Scatter/Gather lists. Thanks to LSI for developing and testing this driver for FreeBSD. share/man/man4/mpr.4: mpr(4) man page. sys/dev/mpr/*: mpr(4) driver files. sys/modules/Makefile, sys/modules/mpr/Makefile: Add a module Makefile for the mpr(4) driver. sys/conf/files: Add the mpr(4) driver. sys/amd64/conf/GENERIC, sys/i386/conf/GENERIC, sys/mips/conf/OCTEON1, sys/sparc64/conf/GENERIC: Add the mpr(4) driver to all config files that currently have the mps(4) driver. sys/ia64/conf/GENERIC: Add the mps(4) and mpr(4) drivers to the ia64 GENERIC config file. sys/i386/conf/XEN: Exclude the mpr module from building here. Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> Tested by: Chris Reeves <chrisr@spectralogic.com> Sponsored by: LSI, Spectra Logic Relnotes: LSI 12Gb SAS driver mpr(4) added ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265237 | ken | 2014-05-02 14:36:20 -0600 (Fri, 02 May 2014) | 8 lines Add the mpr(4) man page to the man4 Makefile. This should have been included in r265236. Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> MFC after: 3 days Sponsored by: LSI, Spectra Logic ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265241 | brueffer | 2014-05-02 15:14:28 -0600 (Fri, 02 May 2014) | 2 lines Use our standard SYNOPSIS wording; perform some cleanup while here. ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265261 | brueffer | 2014-05-03 05:15:28 -0600 (Sat, 03 May 2014) | 2 lines Add a missing colon. ------------------------------------------------------------------------ Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> Tested by: Chris Reeves <chrisr@spectralogic.com> Sponsored by: LSI, Spectra Logic Relnotes: LSI 12Gb SAS driver mpr(4) added diff 265388 Mon May 05 20:43:36 MDT 2014 ken MFC the mpr(4) driver for LSI's 12Gb SAS cards. This includes r265236, r265237, r265241 and r265261: ------------------------------------------------------------------------ r265236 | ken | 2014-05-02 14:25:09 -0600 (Fri, 02 May 2014) | 51 lines Bring in the mpr(4) driver for LSI's MPT3 12Gb SAS controllers. This is derived from the mps(4) driver, but it supports only the 12Gb IT and IR hardware including the SAS 3004, SAS 3008 and SAS 3108. Some notes about this driver: o The 12Gb hardware can do "FastPath" I/O, and that capability is included in this driver. o WarpDrive functionality has been removed, since it isn't supported in the 12Gb driver interface. o The Scatter/Gather list handling code is significantly different between the 6Gb and 12Gb hardware. The 12Gb boards support IEEE Scatter/Gather lists. Thanks to LSI for developing and testing this driver for FreeBSD. share/man/man4/mpr.4: mpr(4) man page. sys/dev/mpr/*: mpr(4) driver files. sys/modules/Makefile, sys/modules/mpr/Makefile: Add a module Makefile for the mpr(4) driver. sys/conf/files: Add the mpr(4) driver. sys/amd64/conf/GENERIC, sys/i386/conf/GENERIC, sys/mips/conf/OCTEON1, sys/sparc64/conf/GENERIC: Add the mpr(4) driver to all config files that currently have the mps(4) driver. sys/ia64/conf/GENERIC: Add the mps(4) and mpr(4) drivers to the ia64 GENERIC config file. sys/i386/conf/XEN: Exclude the mpr module from building here. Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> Tested by: Chris Reeves <chrisr@spectralogic.com> Sponsored by: LSI, Spectra Logic Relnotes: LSI 12Gb SAS driver mpr(4) added ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265237 | ken | 2014-05-02 14:36:20 -0600 (Fri, 02 May 2014) | 8 lines Add the mpr(4) man page to the man4 Makefile. This should have been included in r265236. Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> MFC after: 3 days Sponsored by: LSI, Spectra Logic ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265241 | brueffer | 2014-05-02 15:14:28 -0600 (Fri, 02 May 2014) | 2 lines Use our standard SYNOPSIS wording; perform some cleanup while here. ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265261 | brueffer | 2014-05-03 05:15:28 -0600 (Sat, 03 May 2014) | 2 lines Add a missing colon. ------------------------------------------------------------------------ Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> Tested by: Chris Reeves <chrisr@spectralogic.com> Sponsored by: LSI, Spectra Logic Relnotes: LSI 12Gb SAS driver mpr(4) added diff 265388 Mon May 05 20:43:36 MDT 2014 ken MFC the mpr(4) driver for LSI's 12Gb SAS cards. This includes r265236, r265237, r265241 and r265261: ------------------------------------------------------------------------ r265236 | ken | 2014-05-02 14:25:09 -0600 (Fri, 02 May 2014) | 51 lines Bring in the mpr(4) driver for LSI's MPT3 12Gb SAS controllers. This is derived from the mps(4) driver, but it supports only the 12Gb IT and IR hardware including the SAS 3004, SAS 3008 and SAS 3108. Some notes about this driver: o The 12Gb hardware can do "FastPath" I/O, and that capability is included in this driver. o WarpDrive functionality has been removed, since it isn't supported in the 12Gb driver interface. o The Scatter/Gather list handling code is significantly different between the 6Gb and 12Gb hardware. The 12Gb boards support IEEE Scatter/Gather lists. Thanks to LSI for developing and testing this driver for FreeBSD. share/man/man4/mpr.4: mpr(4) man page. sys/dev/mpr/*: mpr(4) driver files. sys/modules/Makefile, sys/modules/mpr/Makefile: Add a module Makefile for the mpr(4) driver. sys/conf/files: Add the mpr(4) driver. sys/amd64/conf/GENERIC, sys/i386/conf/GENERIC, sys/mips/conf/OCTEON1, sys/sparc64/conf/GENERIC: Add the mpr(4) driver to all config files that currently have the mps(4) driver. sys/ia64/conf/GENERIC: Add the mps(4) and mpr(4) drivers to the ia64 GENERIC config file. sys/i386/conf/XEN: Exclude the mpr module from building here. Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> Tested by: Chris Reeves <chrisr@spectralogic.com> Sponsored by: LSI, Spectra Logic Relnotes: LSI 12Gb SAS driver mpr(4) added ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265237 | ken | 2014-05-02 14:36:20 -0600 (Fri, 02 May 2014) | 8 lines Add the mpr(4) man page to the man4 Makefile. This should have been included in r265236. Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> MFC after: 3 days Sponsored by: LSI, Spectra Logic ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265241 | brueffer | 2014-05-02 15:14:28 -0600 (Fri, 02 May 2014) | 2 lines Use our standard SYNOPSIS wording; perform some cleanup while here. ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265261 | brueffer | 2014-05-03 05:15:28 -0600 (Sat, 03 May 2014) | 2 lines Add a missing colon. ------------------------------------------------------------------------ Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> Tested by: Chris Reeves <chrisr@spectralogic.com> Sponsored by: LSI, Spectra Logic Relnotes: LSI 12Gb SAS driver mpr(4) added diff 265388 Mon May 05 20:43:36 MDT 2014 ken MFC the mpr(4) driver for LSI's 12Gb SAS cards. This includes r265236, r265237, r265241 and r265261: ------------------------------------------------------------------------ r265236 | ken | 2014-05-02 14:25:09 -0600 (Fri, 02 May 2014) | 51 lines Bring in the mpr(4) driver for LSI's MPT3 12Gb SAS controllers. This is derived from the mps(4) driver, but it supports only the 12Gb IT and IR hardware including the SAS 3004, SAS 3008 and SAS 3108. Some notes about this driver: o The 12Gb hardware can do "FastPath" I/O, and that capability is included in this driver. o WarpDrive functionality has been removed, since it isn't supported in the 12Gb driver interface. o The Scatter/Gather list handling code is significantly different between the 6Gb and 12Gb hardware. The 12Gb boards support IEEE Scatter/Gather lists. Thanks to LSI for developing and testing this driver for FreeBSD. share/man/man4/mpr.4: mpr(4) man page. sys/dev/mpr/*: mpr(4) driver files. sys/modules/Makefile, sys/modules/mpr/Makefile: Add a module Makefile for the mpr(4) driver. sys/conf/files: Add the mpr(4) driver. sys/amd64/conf/GENERIC, sys/i386/conf/GENERIC, sys/mips/conf/OCTEON1, sys/sparc64/conf/GENERIC: Add the mpr(4) driver to all config files that currently have the mps(4) driver. sys/ia64/conf/GENERIC: Add the mps(4) and mpr(4) drivers to the ia64 GENERIC config file. sys/i386/conf/XEN: Exclude the mpr module from building here. Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> Tested by: Chris Reeves <chrisr@spectralogic.com> Sponsored by: LSI, Spectra Logic Relnotes: LSI 12Gb SAS driver mpr(4) added ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265237 | ken | 2014-05-02 14:36:20 -0600 (Fri, 02 May 2014) | 8 lines Add the mpr(4) man page to the man4 Makefile. This should have been included in r265236. Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> MFC after: 3 days Sponsored by: LSI, Spectra Logic ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265241 | brueffer | 2014-05-02 15:14:28 -0600 (Fri, 02 May 2014) | 2 lines Use our standard SYNOPSIS wording; perform some cleanup while here. ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265261 | brueffer | 2014-05-03 05:15:28 -0600 (Sat, 03 May 2014) | 2 lines Add a missing colon. ------------------------------------------------------------------------ Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> Tested by: Chris Reeves <chrisr@spectralogic.com> Sponsored by: LSI, Spectra Logic Relnotes: LSI 12Gb SAS driver mpr(4) added diff 265388 Mon May 05 20:43:36 MDT 2014 ken MFC the mpr(4) driver for LSI's 12Gb SAS cards. This includes r265236, r265237, r265241 and r265261: ------------------------------------------------------------------------ r265236 | ken | 2014-05-02 14:25:09 -0600 (Fri, 02 May 2014) | 51 lines Bring in the mpr(4) driver for LSI's MPT3 12Gb SAS controllers. This is derived from the mps(4) driver, but it supports only the 12Gb IT and IR hardware including the SAS 3004, SAS 3008 and SAS 3108. Some notes about this driver: o The 12Gb hardware can do "FastPath" I/O, and that capability is included in this driver. o WarpDrive functionality has been removed, since it isn't supported in the 12Gb driver interface. o The Scatter/Gather list handling code is significantly different between the 6Gb and 12Gb hardware. The 12Gb boards support IEEE Scatter/Gather lists. Thanks to LSI for developing and testing this driver for FreeBSD. share/man/man4/mpr.4: mpr(4) man page. sys/dev/mpr/*: mpr(4) driver files. sys/modules/Makefile, sys/modules/mpr/Makefile: Add a module Makefile for the mpr(4) driver. sys/conf/files: Add the mpr(4) driver. sys/amd64/conf/GENERIC, sys/i386/conf/GENERIC, sys/mips/conf/OCTEON1, sys/sparc64/conf/GENERIC: Add the mpr(4) driver to all config files that currently have the mps(4) driver. sys/ia64/conf/GENERIC: Add the mps(4) and mpr(4) drivers to the ia64 GENERIC config file. sys/i386/conf/XEN: Exclude the mpr module from building here. Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> Tested by: Chris Reeves <chrisr@spectralogic.com> Sponsored by: LSI, Spectra Logic Relnotes: LSI 12Gb SAS driver mpr(4) added ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265237 | ken | 2014-05-02 14:36:20 -0600 (Fri, 02 May 2014) | 8 lines Add the mpr(4) man page to the man4 Makefile. This should have been included in r265236. Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> MFC after: 3 days Sponsored by: LSI, Spectra Logic ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265241 | brueffer | 2014-05-02 15:14:28 -0600 (Fri, 02 May 2014) | 2 lines Use our standard SYNOPSIS wording; perform some cleanup while here. ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265261 | brueffer | 2014-05-03 05:15:28 -0600 (Sat, 03 May 2014) | 2 lines Add a missing colon. ------------------------------------------------------------------------ Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> Tested by: Chris Reeves <chrisr@spectralogic.com> Sponsored by: LSI, Spectra Logic Relnotes: LSI 12Gb SAS driver mpr(4) added diff 265388 Mon May 05 20:43:36 MDT 2014 ken MFC the mpr(4) driver for LSI's 12Gb SAS cards. This includes r265236, r265237, r265241 and r265261: ------------------------------------------------------------------------ r265236 | ken | 2014-05-02 14:25:09 -0600 (Fri, 02 May 2014) | 51 lines Bring in the mpr(4) driver for LSI's MPT3 12Gb SAS controllers. This is derived from the mps(4) driver, but it supports only the 12Gb IT and IR hardware including the SAS 3004, SAS 3008 and SAS 3108. Some notes about this driver: o The 12Gb hardware can do "FastPath" I/O, and that capability is included in this driver. o WarpDrive functionality has been removed, since it isn't supported in the 12Gb driver interface. o The Scatter/Gather list handling code is significantly different between the 6Gb and 12Gb hardware. The 12Gb boards support IEEE Scatter/Gather lists. Thanks to LSI for developing and testing this driver for FreeBSD. share/man/man4/mpr.4: mpr(4) man page. sys/dev/mpr/*: mpr(4) driver files. sys/modules/Makefile, sys/modules/mpr/Makefile: Add a module Makefile for the mpr(4) driver. sys/conf/files: Add the mpr(4) driver. sys/amd64/conf/GENERIC, sys/i386/conf/GENERIC, sys/mips/conf/OCTEON1, sys/sparc64/conf/GENERIC: Add the mpr(4) driver to all config files that currently have the mps(4) driver. sys/ia64/conf/GENERIC: Add the mps(4) and mpr(4) drivers to the ia64 GENERIC config file. sys/i386/conf/XEN: Exclude the mpr module from building here. Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> Tested by: Chris Reeves <chrisr@spectralogic.com> Sponsored by: LSI, Spectra Logic Relnotes: LSI 12Gb SAS driver mpr(4) added ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265237 | ken | 2014-05-02 14:36:20 -0600 (Fri, 02 May 2014) | 8 lines Add the mpr(4) man page to the man4 Makefile. This should have been included in r265236. Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> MFC after: 3 days Sponsored by: LSI, Spectra Logic ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265241 | brueffer | 2014-05-02 15:14:28 -0600 (Fri, 02 May 2014) | 2 lines Use our standard SYNOPSIS wording; perform some cleanup while here. ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265261 | brueffer | 2014-05-03 05:15:28 -0600 (Sat, 03 May 2014) | 2 lines Add a missing colon. ------------------------------------------------------------------------ Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> Tested by: Chris Reeves <chrisr@spectralogic.com> Sponsored by: LSI, Spectra Logic Relnotes: LSI 12Gb SAS driver mpr(4) added diff 265388 Mon May 05 20:43:36 MDT 2014 ken MFC the mpr(4) driver for LSI's 12Gb SAS cards. This includes r265236, r265237, r265241 and r265261: ------------------------------------------------------------------------ r265236 | ken | 2014-05-02 14:25:09 -0600 (Fri, 02 May 2014) | 51 lines Bring in the mpr(4) driver for LSI's MPT3 12Gb SAS controllers. This is derived from the mps(4) driver, but it supports only the 12Gb IT and IR hardware including the SAS 3004, SAS 3008 and SAS 3108. Some notes about this driver: o The 12Gb hardware can do "FastPath" I/O, and that capability is included in this driver. o WarpDrive functionality has been removed, since it isn't supported in the 12Gb driver interface. o The Scatter/Gather list handling code is significantly different between the 6Gb and 12Gb hardware. The 12Gb boards support IEEE Scatter/Gather lists. Thanks to LSI for developing and testing this driver for FreeBSD. share/man/man4/mpr.4: mpr(4) man page. sys/dev/mpr/*: mpr(4) driver files. sys/modules/Makefile, sys/modules/mpr/Makefile: Add a module Makefile for the mpr(4) driver. sys/conf/files: Add the mpr(4) driver. sys/amd64/conf/GENERIC, sys/i386/conf/GENERIC, sys/mips/conf/OCTEON1, sys/sparc64/conf/GENERIC: Add the mpr(4) driver to all config files that currently have the mps(4) driver. sys/ia64/conf/GENERIC: Add the mps(4) and mpr(4) drivers to the ia64 GENERIC config file. sys/i386/conf/XEN: Exclude the mpr module from building here. Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> Tested by: Chris Reeves <chrisr@spectralogic.com> Sponsored by: LSI, Spectra Logic Relnotes: LSI 12Gb SAS driver mpr(4) added ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265237 | ken | 2014-05-02 14:36:20 -0600 (Fri, 02 May 2014) | 8 lines Add the mpr(4) man page to the man4 Makefile. This should have been included in r265236. Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> MFC after: 3 days Sponsored by: LSI, Spectra Logic ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265241 | brueffer | 2014-05-02 15:14:28 -0600 (Fri, 02 May 2014) | 2 lines Use our standard SYNOPSIS wording; perform some cleanup while here. ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265261 | brueffer | 2014-05-03 05:15:28 -0600 (Sat, 03 May 2014) | 2 lines Add a missing colon. ------------------------------------------------------------------------ Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> Tested by: Chris Reeves <chrisr@spectralogic.com> Sponsored by: LSI, Spectra Logic Relnotes: LSI 12Gb SAS driver mpr(4) added diff 265388 Mon May 05 20:43:36 MDT 2014 ken MFC the mpr(4) driver for LSI's 12Gb SAS cards. This includes r265236, r265237, r265241 and r265261: ------------------------------------------------------------------------ r265236 | ken | 2014-05-02 14:25:09 -0600 (Fri, 02 May 2014) | 51 lines Bring in the mpr(4) driver for LSI's MPT3 12Gb SAS controllers. This is derived from the mps(4) driver, but it supports only the 12Gb IT and IR hardware including the SAS 3004, SAS 3008 and SAS 3108. Some notes about this driver: o The 12Gb hardware can do "FastPath" I/O, and that capability is included in this driver. o WarpDrive functionality has been removed, since it isn't supported in the 12Gb driver interface. o The Scatter/Gather list handling code is significantly different between the 6Gb and 12Gb hardware. The 12Gb boards support IEEE Scatter/Gather lists. Thanks to LSI for developing and testing this driver for FreeBSD. share/man/man4/mpr.4: mpr(4) man page. sys/dev/mpr/*: mpr(4) driver files. sys/modules/Makefile, sys/modules/mpr/Makefile: Add a module Makefile for the mpr(4) driver. sys/conf/files: Add the mpr(4) driver. sys/amd64/conf/GENERIC, sys/i386/conf/GENERIC, sys/mips/conf/OCTEON1, sys/sparc64/conf/GENERIC: Add the mpr(4) driver to all config files that currently have the mps(4) driver. sys/ia64/conf/GENERIC: Add the mps(4) and mpr(4) drivers to the ia64 GENERIC config file. sys/i386/conf/XEN: Exclude the mpr module from building here. Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> Tested by: Chris Reeves <chrisr@spectralogic.com> Sponsored by: LSI, Spectra Logic Relnotes: LSI 12Gb SAS driver mpr(4) added ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265237 | ken | 2014-05-02 14:36:20 -0600 (Fri, 02 May 2014) | 8 lines Add the mpr(4) man page to the man4 Makefile. This should have been included in r265236. Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> MFC after: 3 days Sponsored by: LSI, Spectra Logic ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265241 | brueffer | 2014-05-02 15:14:28 -0600 (Fri, 02 May 2014) | 2 lines Use our standard SYNOPSIS wording; perform some cleanup while here. ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265261 | brueffer | 2014-05-03 05:15:28 -0600 (Sat, 03 May 2014) | 2 lines Add a missing colon. ------------------------------------------------------------------------ Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> Tested by: Chris Reeves <chrisr@spectralogic.com> Sponsored by: LSI, Spectra Logic Relnotes: LSI 12Gb SAS driver mpr(4) added diff 265388 Mon May 05 20:43:36 MDT 2014 ken MFC the mpr(4) driver for LSI's 12Gb SAS cards. This includes r265236, r265237, r265241 and r265261: ------------------------------------------------------------------------ r265236 | ken | 2014-05-02 14:25:09 -0600 (Fri, 02 May 2014) | 51 lines Bring in the mpr(4) driver for LSI's MPT3 12Gb SAS controllers. This is derived from the mps(4) driver, but it supports only the 12Gb IT and IR hardware including the SAS 3004, SAS 3008 and SAS 3108. Some notes about this driver: o The 12Gb hardware can do "FastPath" I/O, and that capability is included in this driver. o WarpDrive functionality has been removed, since it isn't supported in the 12Gb driver interface. o The Scatter/Gather list handling code is significantly different between the 6Gb and 12Gb hardware. The 12Gb boards support IEEE Scatter/Gather lists. Thanks to LSI for developing and testing this driver for FreeBSD. share/man/man4/mpr.4: mpr(4) man page. sys/dev/mpr/*: mpr(4) driver files. sys/modules/Makefile, sys/modules/mpr/Makefile: Add a module Makefile for the mpr(4) driver. sys/conf/files: Add the mpr(4) driver. sys/amd64/conf/GENERIC, sys/i386/conf/GENERIC, sys/mips/conf/OCTEON1, sys/sparc64/conf/GENERIC: Add the mpr(4) driver to all config files that currently have the mps(4) driver. sys/ia64/conf/GENERIC: Add the mps(4) and mpr(4) drivers to the ia64 GENERIC config file. sys/i386/conf/XEN: Exclude the mpr module from building here. Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> Tested by: Chris Reeves <chrisr@spectralogic.com> Sponsored by: LSI, Spectra Logic Relnotes: LSI 12Gb SAS driver mpr(4) added ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265237 | ken | 2014-05-02 14:36:20 -0600 (Fri, 02 May 2014) | 8 lines Add the mpr(4) man page to the man4 Makefile. This should have been included in r265236. Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> MFC after: 3 days Sponsored by: LSI, Spectra Logic ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265241 | brueffer | 2014-05-02 15:14:28 -0600 (Fri, 02 May 2014) | 2 lines Use our standard SYNOPSIS wording; perform some cleanup while here. ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265261 | brueffer | 2014-05-03 05:15:28 -0600 (Sat, 03 May 2014) | 2 lines Add a missing colon. ------------------------------------------------------------------------ Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> Tested by: Chris Reeves <chrisr@spectralogic.com> Sponsored by: LSI, Spectra Logic Relnotes: LSI 12Gb SAS driver mpr(4) added diff 265388 Mon May 05 20:43:36 MDT 2014 ken MFC the mpr(4) driver for LSI's 12Gb SAS cards. This includes r265236, r265237, r265241 and r265261: ------------------------------------------------------------------------ r265236 | ken | 2014-05-02 14:25:09 -0600 (Fri, 02 May 2014) | 51 lines Bring in the mpr(4) driver for LSI's MPT3 12Gb SAS controllers. This is derived from the mps(4) driver, but it supports only the 12Gb IT and IR hardware including the SAS 3004, SAS 3008 and SAS 3108. Some notes about this driver: o The 12Gb hardware can do "FastPath" I/O, and that capability is included in this driver. o WarpDrive functionality has been removed, since it isn't supported in the 12Gb driver interface. o The Scatter/Gather list handling code is significantly different between the 6Gb and 12Gb hardware. The 12Gb boards support IEEE Scatter/Gather lists. Thanks to LSI for developing and testing this driver for FreeBSD. share/man/man4/mpr.4: mpr(4) man page. sys/dev/mpr/*: mpr(4) driver files. sys/modules/Makefile, sys/modules/mpr/Makefile: Add a module Makefile for the mpr(4) driver. sys/conf/files: Add the mpr(4) driver. sys/amd64/conf/GENERIC, sys/i386/conf/GENERIC, sys/mips/conf/OCTEON1, sys/sparc64/conf/GENERIC: Add the mpr(4) driver to all config files that currently have the mps(4) driver. sys/ia64/conf/GENERIC: Add the mps(4) and mpr(4) drivers to the ia64 GENERIC config file. sys/i386/conf/XEN: Exclude the mpr module from building here. Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> Tested by: Chris Reeves <chrisr@spectralogic.com> Sponsored by: LSI, Spectra Logic Relnotes: LSI 12Gb SAS driver mpr(4) added ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265237 | ken | 2014-05-02 14:36:20 -0600 (Fri, 02 May 2014) | 8 lines Add the mpr(4) man page to the man4 Makefile. This should have been included in r265236. Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> MFC after: 3 days Sponsored by: LSI, Spectra Logic ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265241 | brueffer | 2014-05-02 15:14:28 -0600 (Fri, 02 May 2014) | 2 lines Use our standard SYNOPSIS wording; perform some cleanup while here. ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265261 | brueffer | 2014-05-03 05:15:28 -0600 (Sat, 03 May 2014) | 2 lines Add a missing colon. ------------------------------------------------------------------------ Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> Tested by: Chris Reeves <chrisr@spectralogic.com> Sponsored by: LSI, Spectra Logic Relnotes: LSI 12Gb SAS driver mpr(4) added diff 265388 Mon May 05 20:43:36 MDT 2014 ken MFC the mpr(4) driver for LSI's 12Gb SAS cards. This includes r265236, r265237, r265241 and r265261: ------------------------------------------------------------------------ r265236 | ken | 2014-05-02 14:25:09 -0600 (Fri, 02 May 2014) | 51 lines Bring in the mpr(4) driver for LSI's MPT3 12Gb SAS controllers. This is derived from the mps(4) driver, but it supports only the 12Gb IT and IR hardware including the SAS 3004, SAS 3008 and SAS 3108. Some notes about this driver: o The 12Gb hardware can do "FastPath" I/O, and that capability is included in this driver. o WarpDrive functionality has been removed, since it isn't supported in the 12Gb driver interface. o The Scatter/Gather list handling code is significantly different between the 6Gb and 12Gb hardware. The 12Gb boards support IEEE Scatter/Gather lists. Thanks to LSI for developing and testing this driver for FreeBSD. share/man/man4/mpr.4: mpr(4) man page. sys/dev/mpr/*: mpr(4) driver files. sys/modules/Makefile, sys/modules/mpr/Makefile: Add a module Makefile for the mpr(4) driver. sys/conf/files: Add the mpr(4) driver. sys/amd64/conf/GENERIC, sys/i386/conf/GENERIC, sys/mips/conf/OCTEON1, sys/sparc64/conf/GENERIC: Add the mpr(4) driver to all config files that currently have the mps(4) driver. sys/ia64/conf/GENERIC: Add the mps(4) and mpr(4) drivers to the ia64 GENERIC config file. sys/i386/conf/XEN: Exclude the mpr module from building here. Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> Tested by: Chris Reeves <chrisr@spectralogic.com> Sponsored by: LSI, Spectra Logic Relnotes: LSI 12Gb SAS driver mpr(4) added ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265237 | ken | 2014-05-02 14:36:20 -0600 (Fri, 02 May 2014) | 8 lines Add the mpr(4) man page to the man4 Makefile. This should have been included in r265236. Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> MFC after: 3 days Sponsored by: LSI, Spectra Logic ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265241 | brueffer | 2014-05-02 15:14:28 -0600 (Fri, 02 May 2014) | 2 lines Use our standard SYNOPSIS wording; perform some cleanup while here. ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265261 | brueffer | 2014-05-03 05:15:28 -0600 (Sat, 03 May 2014) | 2 lines Add a missing colon. ------------------------------------------------------------------------ Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> Tested by: Chris Reeves <chrisr@spectralogic.com> Sponsored by: LSI, Spectra Logic Relnotes: LSI 12Gb SAS driver mpr(4) added diff 265388 Mon May 05 20:43:36 MDT 2014 ken MFC the mpr(4) driver for LSI's 12Gb SAS cards. This includes r265236, r265237, r265241 and r265261: ------------------------------------------------------------------------ r265236 | ken | 2014-05-02 14:25:09 -0600 (Fri, 02 May 2014) | 51 lines Bring in the mpr(4) driver for LSI's MPT3 12Gb SAS controllers. This is derived from the mps(4) driver, but it supports only the 12Gb IT and IR hardware including the SAS 3004, SAS 3008 and SAS 3108. Some notes about this driver: o The 12Gb hardware can do "FastPath" I/O, and that capability is included in this driver. o WarpDrive functionality has been removed, since it isn't supported in the 12Gb driver interface. o The Scatter/Gather list handling code is significantly different between the 6Gb and 12Gb hardware. The 12Gb boards support IEEE Scatter/Gather lists. Thanks to LSI for developing and testing this driver for FreeBSD. share/man/man4/mpr.4: mpr(4) man page. sys/dev/mpr/*: mpr(4) driver files. sys/modules/Makefile, sys/modules/mpr/Makefile: Add a module Makefile for the mpr(4) driver. sys/conf/files: Add the mpr(4) driver. sys/amd64/conf/GENERIC, sys/i386/conf/GENERIC, sys/mips/conf/OCTEON1, sys/sparc64/conf/GENERIC: Add the mpr(4) driver to all config files that currently have the mps(4) driver. sys/ia64/conf/GENERIC: Add the mps(4) and mpr(4) drivers to the ia64 GENERIC config file. sys/i386/conf/XEN: Exclude the mpr module from building here. Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> Tested by: Chris Reeves <chrisr@spectralogic.com> Sponsored by: LSI, Spectra Logic Relnotes: LSI 12Gb SAS driver mpr(4) added ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265237 | ken | 2014-05-02 14:36:20 -0600 (Fri, 02 May 2014) | 8 lines Add the mpr(4) man page to the man4 Makefile. This should have been included in r265236. Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> MFC after: 3 days Sponsored by: LSI, Spectra Logic ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265241 | brueffer | 2014-05-02 15:14:28 -0600 (Fri, 02 May 2014) | 2 lines Use our standard SYNOPSIS wording; perform some cleanup while here. ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265261 | brueffer | 2014-05-03 05:15:28 -0600 (Sat, 03 May 2014) | 2 lines Add a missing colon. ------------------------------------------------------------------------ Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> Tested by: Chris Reeves <chrisr@spectralogic.com> Sponsored by: LSI, Spectra Logic Relnotes: LSI 12Gb SAS driver mpr(4) added diff 265388 Mon May 05 20:43:36 MDT 2014 ken MFC the mpr(4) driver for LSI's 12Gb SAS cards. This includes r265236, r265237, r265241 and r265261: ------------------------------------------------------------------------ r265236 | ken | 2014-05-02 14:25:09 -0600 (Fri, 02 May 2014) | 51 lines Bring in the mpr(4) driver for LSI's MPT3 12Gb SAS controllers. This is derived from the mps(4) driver, but it supports only the 12Gb IT and IR hardware including the SAS 3004, SAS 3008 and SAS 3108. Some notes about this driver: o The 12Gb hardware can do "FastPath" I/O, and that capability is included in this driver. o WarpDrive functionality has been removed, since it isn't supported in the 12Gb driver interface. o The Scatter/Gather list handling code is significantly different between the 6Gb and 12Gb hardware. The 12Gb boards support IEEE Scatter/Gather lists. Thanks to LSI for developing and testing this driver for FreeBSD. share/man/man4/mpr.4: mpr(4) man page. sys/dev/mpr/*: mpr(4) driver files. sys/modules/Makefile, sys/modules/mpr/Makefile: Add a module Makefile for the mpr(4) driver. sys/conf/files: Add the mpr(4) driver. sys/amd64/conf/GENERIC, sys/i386/conf/GENERIC, sys/mips/conf/OCTEON1, sys/sparc64/conf/GENERIC: Add the mpr(4) driver to all config files that currently have the mps(4) driver. sys/ia64/conf/GENERIC: Add the mps(4) and mpr(4) drivers to the ia64 GENERIC config file. sys/i386/conf/XEN: Exclude the mpr module from building here. Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> Tested by: Chris Reeves <chrisr@spectralogic.com> Sponsored by: LSI, Spectra Logic Relnotes: LSI 12Gb SAS driver mpr(4) added ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265237 | ken | 2014-05-02 14:36:20 -0600 (Fri, 02 May 2014) | 8 lines Add the mpr(4) man page to the man4 Makefile. This should have been included in r265236. Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> MFC after: 3 days Sponsored by: LSI, Spectra Logic ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265241 | brueffer | 2014-05-02 15:14:28 -0600 (Fri, 02 May 2014) | 2 lines Use our standard SYNOPSIS wording; perform some cleanup while here. ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265261 | brueffer | 2014-05-03 05:15:28 -0600 (Sat, 03 May 2014) | 2 lines Add a missing colon. ------------------------------------------------------------------------ Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> Tested by: Chris Reeves <chrisr@spectralogic.com> Sponsored by: LSI, Spectra Logic Relnotes: LSI 12Gb SAS driver mpr(4) added diff 265388 Mon May 05 20:43:36 MDT 2014 ken MFC the mpr(4) driver for LSI's 12Gb SAS cards. This includes r265236, r265237, r265241 and r265261: ------------------------------------------------------------------------ r265236 | ken | 2014-05-02 14:25:09 -0600 (Fri, 02 May 2014) | 51 lines Bring in the mpr(4) driver for LSI's MPT3 12Gb SAS controllers. This is derived from the mps(4) driver, but it supports only the 12Gb IT and IR hardware including the SAS 3004, SAS 3008 and SAS 3108. Some notes about this driver: o The 12Gb hardware can do "FastPath" I/O, and that capability is included in this driver. o WarpDrive functionality has been removed, since it isn't supported in the 12Gb driver interface. o The Scatter/Gather list handling code is significantly different between the 6Gb and 12Gb hardware. The 12Gb boards support IEEE Scatter/Gather lists. Thanks to LSI for developing and testing this driver for FreeBSD. share/man/man4/mpr.4: mpr(4) man page. sys/dev/mpr/*: mpr(4) driver files. sys/modules/Makefile, sys/modules/mpr/Makefile: Add a module Makefile for the mpr(4) driver. sys/conf/files: Add the mpr(4) driver. sys/amd64/conf/GENERIC, sys/i386/conf/GENERIC, sys/mips/conf/OCTEON1, sys/sparc64/conf/GENERIC: Add the mpr(4) driver to all config files that currently have the mps(4) driver. sys/ia64/conf/GENERIC: Add the mps(4) and mpr(4) drivers to the ia64 GENERIC config file. sys/i386/conf/XEN: Exclude the mpr module from building here. Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> Tested by: Chris Reeves <chrisr@spectralogic.com> Sponsored by: LSI, Spectra Logic Relnotes: LSI 12Gb SAS driver mpr(4) added ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265237 | ken | 2014-05-02 14:36:20 -0600 (Fri, 02 May 2014) | 8 lines Add the mpr(4) man page to the man4 Makefile. This should have been included in r265236. Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> MFC after: 3 days Sponsored by: LSI, Spectra Logic ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265241 | brueffer | 2014-05-02 15:14:28 -0600 (Fri, 02 May 2014) | 2 lines Use our standard SYNOPSIS wording; perform some cleanup while here. ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265261 | brueffer | 2014-05-03 05:15:28 -0600 (Sat, 03 May 2014) | 2 lines Add a missing colon. ------------------------------------------------------------------------ Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> Tested by: Chris Reeves <chrisr@spectralogic.com> Sponsored by: LSI, Spectra Logic Relnotes: LSI 12Gb SAS driver mpr(4) added diff 265388 Mon May 05 20:43:36 MDT 2014 ken MFC the mpr(4) driver for LSI's 12Gb SAS cards. This includes r265236, r265237, r265241 and r265261: ------------------------------------------------------------------------ r265236 | ken | 2014-05-02 14:25:09 -0600 (Fri, 02 May 2014) | 51 lines Bring in the mpr(4) driver for LSI's MPT3 12Gb SAS controllers. This is derived from the mps(4) driver, but it supports only the 12Gb IT and IR hardware including the SAS 3004, SAS 3008 and SAS 3108. Some notes about this driver: o The 12Gb hardware can do "FastPath" I/O, and that capability is included in this driver. o WarpDrive functionality has been removed, since it isn't supported in the 12Gb driver interface. o The Scatter/Gather list handling code is significantly different between the 6Gb and 12Gb hardware. The 12Gb boards support IEEE Scatter/Gather lists. Thanks to LSI for developing and testing this driver for FreeBSD. share/man/man4/mpr.4: mpr(4) man page. sys/dev/mpr/*: mpr(4) driver files. sys/modules/Makefile, sys/modules/mpr/Makefile: Add a module Makefile for the mpr(4) driver. sys/conf/files: Add the mpr(4) driver. sys/amd64/conf/GENERIC, sys/i386/conf/GENERIC, sys/mips/conf/OCTEON1, sys/sparc64/conf/GENERIC: Add the mpr(4) driver to all config files that currently have the mps(4) driver. sys/ia64/conf/GENERIC: Add the mps(4) and mpr(4) drivers to the ia64 GENERIC config file. sys/i386/conf/XEN: Exclude the mpr module from building here. Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> Tested by: Chris Reeves <chrisr@spectralogic.com> Sponsored by: LSI, Spectra Logic Relnotes: LSI 12Gb SAS driver mpr(4) added ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265237 | ken | 2014-05-02 14:36:20 -0600 (Fri, 02 May 2014) | 8 lines Add the mpr(4) man page to the man4 Makefile. This should have been included in r265236. Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> MFC after: 3 days Sponsored by: LSI, Spectra Logic ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265241 | brueffer | 2014-05-02 15:14:28 -0600 (Fri, 02 May 2014) | 2 lines Use our standard SYNOPSIS wording; perform some cleanup while here. ------------------------------------------------------------------------ ------------------------------------------------------------------------ r265261 | brueffer | 2014-05-03 05:15:28 -0600 (Sat, 03 May 2014) | 2 lines Add a missing colon. ------------------------------------------------------------------------ Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> Tested by: Chris Reeves <chrisr@spectralogic.com> Sponsored by: LSI, Spectra Logic Relnotes: LSI 12Gb SAS driver mpr(4) added |
| /freebsd-10.2-release/sys/boot/forth/ | ||
| H A D | pnp.4th | diff 281843 Wed Apr 22 01:14:15 MDT 2015 dteske MFC revisions 277693,278335,280382-280385,280923-280926,280931, 280933-280939,280974-280976,281002,281009,281081,281176-281180, 281271,281275,281616 (described in-breif below): r277693: Font fix (des) r278335: Revert that r280382: Whitespace, comments, and copyright update r280383: Prevent inadvertent bootlock condition r280384: Increase max passowrd length from 16 to 255 chars r280385: Add missing variable hints to loader.conf(5) defaults r280923: Whitespace r280924: Comments r280925: Optimize bootmsg to use fg/bg/me from screen.4th r280926: Whitespace and cleanup r280931: Comments r280933: Move beastie to logo-*.4th; brands to brand-*.4th r280934: Add remainder of supported ANSI escape sequences r280935: Securely overwrite (zero) user input after password checks r280936: Use equals for ASCII double frames r280937: Solve dreaded "dictionary full" issue r280938: Add "GELI Passphrase:" prompt to boot loader r280939: Revert that (premature commit) r280974: Use fg/b/me from screen.4th instead of literals r280975: Eliminate literal escape sequences from *.4th r280976: Use ^[[m mode-ending versus ^[[37m r281002: Install newly added brand-*.4th and logo-*.4th files (jkim) r281009: Revert .PATH changes to fix mips build (jkim) r281081: Make sure forth manpages are only installed once (bapt) r281176: Back to previous mode-endings based on feedback r281177: Back to previous mode-endings based on feedback r281178: Back to previous mode-endings based on feedback r281179: Back to previous mode-endings based on feedback r281180: Eliminate literal escape sequences from *.rc r281271: Fix a bootlock condition if loader_version is set NB: Commit message of r281271 has a typo, s/_logo/_version/ r281275: Re-do proper mode-endings r281616: Add "GELI Passphrase:" prompt to boot loader Relnotes: Added "GELI Passphrase:" prompt to boot loader diff 281843 Wed Apr 22 01:14:15 MDT 2015 dteske MFC revisions 277693,278335,280382-280385,280923-280926,280931, 280933-280939,280974-280976,281002,281009,281081,281176-281180, 281271,281275,281616 (described in-breif below): r277693: Font fix (des) r278335: Revert that r280382: Whitespace, comments, and copyright update r280383: Prevent inadvertent bootlock condition r280384: Increase max passowrd length from 16 to 255 chars r280385: Add missing variable hints to loader.conf(5) defaults r280923: Whitespace r280924: Comments r280925: Optimize bootmsg to use fg/bg/me from screen.4th r280926: Whitespace and cleanup r280931: Comments r280933: Move beastie to logo-*.4th; brands to brand-*.4th r280934: Add remainder of supported ANSI escape sequences r280935: Securely overwrite (zero) user input after password checks r280936: Use equals for ASCII double frames r280937: Solve dreaded "dictionary full" issue r280938: Add "GELI Passphrase:" prompt to boot loader r280939: Revert that (premature commit) r280974: Use fg/b/me from screen.4th instead of literals r280975: Eliminate literal escape sequences from *.4th r280976: Use ^[[m mode-ending versus ^[[37m r281002: Install newly added brand-*.4th and logo-*.4th files (jkim) r281009: Revert .PATH changes to fix mips build (jkim) r281081: Make sure forth manpages are only installed once (bapt) r281176: Back to previous mode-endings based on feedback r281177: Back to previous mode-endings based on feedback r281178: Back to previous mode-endings based on feedback r281179: Back to previous mode-endings based on feedback r281180: Eliminate literal escape sequences from *.rc r281271: Fix a bootlock condition if loader_version is set NB: Commit message of r281271 has a typo, s/_logo/_version/ r281275: Re-do proper mode-endings r281616: Add "GELI Passphrase:" prompt to boot loader Relnotes: Added "GELI Passphrase:" prompt to boot loader diff 281843 Wed Apr 22 01:14:15 MDT 2015 dteske MFC revisions 277693,278335,280382-280385,280923-280926,280931, 280933-280939,280974-280976,281002,281009,281081,281176-281180, 281271,281275,281616 (described in-breif below): r277693: Font fix (des) r278335: Revert that r280382: Whitespace, comments, and copyright update r280383: Prevent inadvertent bootlock condition r280384: Increase max passowrd length from 16 to 255 chars r280385: Add missing variable hints to loader.conf(5) defaults r280923: Whitespace r280924: Comments r280925: Optimize bootmsg to use fg/bg/me from screen.4th r280926: Whitespace and cleanup r280931: Comments r280933: Move beastie to logo-*.4th; brands to brand-*.4th r280934: Add remainder of supported ANSI escape sequences r280935: Securely overwrite (zero) user input after password checks r280936: Use equals for ASCII double frames r280937: Solve dreaded "dictionary full" issue r280938: Add "GELI Passphrase:" prompt to boot loader r280939: Revert that (premature commit) r280974: Use fg/b/me from screen.4th instead of literals r280975: Eliminate literal escape sequences from *.4th r280976: Use ^[[m mode-ending versus ^[[37m r281002: Install newly added brand-*.4th and logo-*.4th files (jkim) r281009: Revert .PATH changes to fix mips build (jkim) r281081: Make sure forth manpages are only installed once (bapt) r281176: Back to previous mode-endings based on feedback r281177: Back to previous mode-endings based on feedback r281178: Back to previous mode-endings based on feedback r281179: Back to previous mode-endings based on feedback r281180: Eliminate literal escape sequences from *.rc r281271: Fix a bootlock condition if loader_version is set NB: Commit message of r281271 has a typo, s/_logo/_version/ r281275: Re-do proper mode-endings r281616: Add "GELI Passphrase:" prompt to boot loader Relnotes: Added "GELI Passphrase:" prompt to boot loader diff 281843 Wed Apr 22 01:14:15 MDT 2015 dteske MFC revisions 277693,278335,280382-280385,280923-280926,280931, 280933-280939,280974-280976,281002,281009,281081,281176-281180, 281271,281275,281616 (described in-breif below): r277693: Font fix (des) r278335: Revert that r280382: Whitespace, comments, and copyright update r280383: Prevent inadvertent bootlock condition r280384: Increase max passowrd length from 16 to 255 chars r280385: Add missing variable hints to loader.conf(5) defaults r280923: Whitespace r280924: Comments r280925: Optimize bootmsg to use fg/bg/me from screen.4th r280926: Whitespace and cleanup r280931: Comments r280933: Move beastie to logo-*.4th; brands to brand-*.4th r280934: Add remainder of supported ANSI escape sequences r280935: Securely overwrite (zero) user input after password checks r280936: Use equals for ASCII double frames r280937: Solve dreaded "dictionary full" issue r280938: Add "GELI Passphrase:" prompt to boot loader r280939: Revert that (premature commit) r280974: Use fg/b/me from screen.4th instead of literals r280975: Eliminate literal escape sequences from *.4th r280976: Use ^[[m mode-ending versus ^[[37m r281002: Install newly added brand-*.4th and logo-*.4th files (jkim) r281009: Revert .PATH changes to fix mips build (jkim) r281081: Make sure forth manpages are only installed once (bapt) r281176: Back to previous mode-endings based on feedback r281177: Back to previous mode-endings based on feedback r281178: Back to previous mode-endings based on feedback r281179: Back to previous mode-endings based on feedback r281180: Eliminate literal escape sequences from *.rc r281271: Fix a bootlock condition if loader_version is set NB: Commit message of r281271 has a typo, s/_logo/_version/ r281275: Re-do proper mode-endings r281616: Add "GELI Passphrase:" prompt to boot loader Relnotes: Added "GELI Passphrase:" prompt to boot loader diff 281843 Wed Apr 22 01:14:15 MDT 2015 dteske MFC revisions 277693,278335,280382-280385,280923-280926,280931, 280933-280939,280974-280976,281002,281009,281081,281176-281180, 281271,281275,281616 (described in-breif below): r277693: Font fix (des) r278335: Revert that r280382: Whitespace, comments, and copyright update r280383: Prevent inadvertent bootlock condition r280384: Increase max passowrd length from 16 to 255 chars r280385: Add missing variable hints to loader.conf(5) defaults r280923: Whitespace r280924: Comments r280925: Optimize bootmsg to use fg/bg/me from screen.4th r280926: Whitespace and cleanup r280931: Comments r280933: Move beastie to logo-*.4th; brands to brand-*.4th r280934: Add remainder of supported ANSI escape sequences r280935: Securely overwrite (zero) user input after password checks r280936: Use equals for ASCII double frames r280937: Solve dreaded "dictionary full" issue r280938: Add "GELI Passphrase:" prompt to boot loader r280939: Revert that (premature commit) r280974: Use fg/b/me from screen.4th instead of literals r280975: Eliminate literal escape sequences from *.4th r280976: Use ^[[m mode-ending versus ^[[37m r281002: Install newly added brand-*.4th and logo-*.4th files (jkim) r281009: Revert .PATH changes to fix mips build (jkim) r281081: Make sure forth manpages are only installed once (bapt) r281176: Back to previous mode-endings based on feedback r281177: Back to previous mode-endings based on feedback r281178: Back to previous mode-endings based on feedback r281179: Back to previous mode-endings based on feedback r281180: Eliminate literal escape sequences from *.rc r281271: Fix a bootlock condition if loader_version is set NB: Commit message of r281271 has a typo, s/_logo/_version/ r281275: Re-do proper mode-endings r281616: Add "GELI Passphrase:" prompt to boot loader Relnotes: Added "GELI Passphrase:" prompt to boot loader diff 281843 Wed Apr 22 01:14:15 MDT 2015 dteske MFC revisions 277693,278335,280382-280385,280923-280926,280931, 280933-280939,280974-280976,281002,281009,281081,281176-281180, 281271,281275,281616 (described in-breif below): r277693: Font fix (des) r278335: Revert that r280382: Whitespace, comments, and copyright update r280383: Prevent inadvertent bootlock condition r280384: Increase max passowrd length from 16 to 255 chars r280385: Add missing variable hints to loader.conf(5) defaults r280923: Whitespace r280924: Comments r280925: Optimize bootmsg to use fg/bg/me from screen.4th r280926: Whitespace and cleanup r280931: Comments r280933: Move beastie to logo-*.4th; brands to brand-*.4th r280934: Add remainder of supported ANSI escape sequences r280935: Securely overwrite (zero) user input after password checks r280936: Use equals for ASCII double frames r280937: Solve dreaded "dictionary full" issue r280938: Add "GELI Passphrase:" prompt to boot loader r280939: Revert that (premature commit) r280974: Use fg/b/me from screen.4th instead of literals r280975: Eliminate literal escape sequences from *.4th r280976: Use ^[[m mode-ending versus ^[[37m r281002: Install newly added brand-*.4th and logo-*.4th files (jkim) r281009: Revert .PATH changes to fix mips build (jkim) r281081: Make sure forth manpages are only installed once (bapt) r281176: Back to previous mode-endings based on feedback r281177: Back to previous mode-endings based on feedback r281178: Back to previous mode-endings based on feedback r281179: Back to previous mode-endings based on feedback r281180: Eliminate literal escape sequences from *.rc r281271: Fix a bootlock condition if loader_version is set NB: Commit message of r281271 has a typo, s/_logo/_version/ r281275: Re-do proper mode-endings r281616: Add "GELI Passphrase:" prompt to boot loader Relnotes: Added "GELI Passphrase:" prompt to boot loader diff 281843 Wed Apr 22 01:14:15 MDT 2015 dteske MFC revisions 277693,278335,280382-280385,280923-280926,280931, 280933-280939,280974-280976,281002,281009,281081,281176-281180, 281271,281275,281616 (described in-breif below): r277693: Font fix (des) r278335: Revert that r280382: Whitespace, comments, and copyright update r280383: Prevent inadvertent bootlock condition r280384: Increase max passowrd length from 16 to 255 chars r280385: Add missing variable hints to loader.conf(5) defaults r280923: Whitespace r280924: Comments r280925: Optimize bootmsg to use fg/bg/me from screen.4th r280926: Whitespace and cleanup r280931: Comments r280933: Move beastie to logo-*.4th; brands to brand-*.4th r280934: Add remainder of supported ANSI escape sequences r280935: Securely overwrite (zero) user input after password checks r280936: Use equals for ASCII double frames r280937: Solve dreaded "dictionary full" issue r280938: Add "GELI Passphrase:" prompt to boot loader r280939: Revert that (premature commit) r280974: Use fg/b/me from screen.4th instead of literals r280975: Eliminate literal escape sequences from *.4th r280976: Use ^[[m mode-ending versus ^[[37m r281002: Install newly added brand-*.4th and logo-*.4th files (jkim) r281009: Revert .PATH changes to fix mips build (jkim) r281081: Make sure forth manpages are only installed once (bapt) r281176: Back to previous mode-endings based on feedback r281177: Back to previous mode-endings based on feedback r281178: Back to previous mode-endings based on feedback r281179: Back to previous mode-endings based on feedback r281180: Eliminate literal escape sequences from *.rc r281271: Fix a bootlock condition if loader_version is set NB: Commit message of r281271 has a typo, s/_logo/_version/ r281275: Re-do proper mode-endings r281616: Add "GELI Passphrase:" prompt to boot loader Relnotes: Added "GELI Passphrase:" prompt to boot loader diff 186789 Mon Jan 05 20:18:27 MST 2009 luigi This patch introduces a number of simplifications to the Forth functions used in the bootloader. The goal is to make the code more readable and smaller (especially because we have size issues in the loader's environment). High level description of the changes: + define some string manipulation functions to improve readability; + create functions to manipulate module descriptors, removing some duplicated code; + rename the error codes to ESOMETHING; + consistently use set_environment_variable (which evaluates $variables) when interpreting variable=value assignments; I have tested the code, but there might be code paths that I have not traversed so please let me know of any issues. Details of this change: --- loader.4th --- + add some module operators, to remove duplicated code while parsing module-related commands: set-module-flag enable-module disable-module toggle-module show-module --- pnp.4th --- + move here the definition related to the pnp devices list, e.g. STAILQ_* , pnpident, pnpinfo --- support.4th --- + rename error codes to capital e.g. ENOMEM EFREE ... and do obvious changes related to the renaming; + remove unused structures (those relevant to pnp are moved to pnp.4th) + various string functions - strlen removed (it is an internal function) - strchr, defined as the C function - strtype -- type a string to output - strref -- assign a reference to the string on the stack - unquote -- remove quotes from a string + remove reset_line_buffer + move up the 'set_environment_variable' function (which now uses the interpreter, so $variables are evaluated). Use the function in various places + add a 'test_file function' for debugging purposes MFC after: 4 weeks diff 186789 Mon Jan 05 20:18:27 MST 2009 luigi This patch introduces a number of simplifications to the Forth functions used in the bootloader. The goal is to make the code more readable and smaller (especially because we have size issues in the loader's environment). High level description of the changes: + define some string manipulation functions to improve readability; + create functions to manipulate module descriptors, removing some duplicated code; + rename the error codes to ESOMETHING; + consistently use set_environment_variable (which evaluates $variables) when interpreting variable=value assignments; I have tested the code, but there might be code paths that I have not traversed so please let me know of any issues. Details of this change: --- loader.4th --- + add some module operators, to remove duplicated code while parsing module-related commands: set-module-flag enable-module disable-module toggle-module show-module --- pnp.4th --- + move here the definition related to the pnp devices list, e.g. STAILQ_* , pnpident, pnpinfo --- support.4th --- + rename error codes to capital e.g. ENOMEM EFREE ... and do obvious changes related to the renaming; + remove unused structures (those relevant to pnp are moved to pnp.4th) + various string functions - strlen removed (it is an internal function) - strchr, defined as the C function - strtype -- type a string to output - strref -- assign a reference to the string on the stack - unquote -- remove quotes from a string + remove reset_line_buffer + move up the 'set_environment_variable' function (which now uses the interpreter, so $variables are evaluated). Use the function in various places + add a 'test_file function' for debugging purposes MFC after: 4 weeks diff 186789 Mon Jan 05 20:18:27 MST 2009 luigi This patch introduces a number of simplifications to the Forth functions used in the bootloader. The goal is to make the code more readable and smaller (especially because we have size issues in the loader's environment). High level description of the changes: + define some string manipulation functions to improve readability; + create functions to manipulate module descriptors, removing some duplicated code; + rename the error codes to ESOMETHING; + consistently use set_environment_variable (which evaluates $variables) when interpreting variable=value assignments; I have tested the code, but there might be code paths that I have not traversed so please let me know of any issues. Details of this change: --- loader.4th --- + add some module operators, to remove duplicated code while parsing module-related commands: set-module-flag enable-module disable-module toggle-module show-module --- pnp.4th --- + move here the definition related to the pnp devices list, e.g. STAILQ_* , pnpident, pnpinfo --- support.4th --- + rename error codes to capital e.g. ENOMEM EFREE ... and do obvious changes related to the renaming; + remove unused structures (those relevant to pnp are moved to pnp.4th) + various string functions - strlen removed (it is an internal function) - strchr, defined as the C function - strtype -- type a string to output - strref -- assign a reference to the string on the stack - unquote -- remove quotes from a string + remove reset_line_buffer + move up the 'set_environment_variable' function (which now uses the interpreter, so $variables are evaluated). Use the function in various places + add a 'test_file function' for debugging purposes MFC after: 4 weeks diff 186789 Mon Jan 05 20:18:27 MST 2009 luigi This patch introduces a number of simplifications to the Forth functions used in the bootloader. The goal is to make the code more readable and smaller (especially because we have size issues in the loader's environment). High level description of the changes: + define some string manipulation functions to improve readability; + create functions to manipulate module descriptors, removing some duplicated code; + rename the error codes to ESOMETHING; + consistently use set_environment_variable (which evaluates $variables) when interpreting variable=value assignments; I have tested the code, but there might be code paths that I have not traversed so please let me know of any issues. Details of this change: --- loader.4th --- + add some module operators, to remove duplicated code while parsing module-related commands: set-module-flag enable-module disable-module toggle-module show-module --- pnp.4th --- + move here the definition related to the pnp devices list, e.g. STAILQ_* , pnpident, pnpinfo --- support.4th --- + rename error codes to capital e.g. ENOMEM EFREE ... and do obvious changes related to the renaming; + remove unused structures (those relevant to pnp are moved to pnp.4th) + various string functions - strlen removed (it is an internal function) - strchr, defined as the C function - strtype -- type a string to output - strref -- assign a reference to the string on the stack - unquote -- remove quotes from a string + remove reset_line_buffer + move up the 'set_environment_variable' function (which now uses the interpreter, so $variables are evaluated). Use the function in various places + add a 'test_file function' for debugging purposes MFC after: 4 weeks diff 186789 Mon Jan 05 20:18:27 MST 2009 luigi This patch introduces a number of simplifications to the Forth functions used in the bootloader. The goal is to make the code more readable and smaller (especially because we have size issues in the loader's environment). High level description of the changes: + define some string manipulation functions to improve readability; + create functions to manipulate module descriptors, removing some duplicated code; + rename the error codes to ESOMETHING; + consistently use set_environment_variable (which evaluates $variables) when interpreting variable=value assignments; I have tested the code, but there might be code paths that I have not traversed so please let me know of any issues. Details of this change: --- loader.4th --- + add some module operators, to remove duplicated code while parsing module-related commands: set-module-flag enable-module disable-module toggle-module show-module --- pnp.4th --- + move here the definition related to the pnp devices list, e.g. STAILQ_* , pnpident, pnpinfo --- support.4th --- + rename error codes to capital e.g. ENOMEM EFREE ... and do obvious changes related to the renaming; + remove unused structures (those relevant to pnp are moved to pnp.4th) + various string functions - strlen removed (it is an internal function) - strchr, defined as the C function - strtype -- type a string to output - strref -- assign a reference to the string on the stack - unquote -- remove quotes from a string + remove reset_line_buffer + move up the 'set_environment_variable' function (which now uses the interpreter, so $variables are evaluated). Use the function in various places + add a 'test_file function' for debugging purposes MFC after: 4 weeks |
| /freebsd-10.2-release/sys/dev/gpio/ | ||
| H A D | ofw_gpiobus.c | diff 266105 Thu May 15 01:44:32 MDT 2014 loos MFC r258046, r258047, r258050, r259035, r259036, r259037, r261842, r261843, r261844, r261845, r261846, r262194, r262522, r262559 r258046: Fix a typo on a comment in ofw_bus_if.m, the default method will return -1 when a node doesn't exist. r258047: Move the KASSERT() check to the point before the increase of number of pins. r258050: Fix gpiobus to return BUS_PROBE_GENERIC insted of BUS_PROBE_SPECIFIC (0) so it can be overriden by its OFW/FDT version. Give a chance for GPIO devices that implement the device_identify method to attach. r259035: Remove unnecessary includes and an unused softc variable. While here apply two minor style(9) fixes. r259036: Move the GPIOBUS_SET_PINFLAGS(..., ..., pin, GPIO_PIN_OUTPUT) to led(4) control callback function. This makes gpioled(4) works even if the pin is accidentally set to an input. r259037: Fix the pin value reading on AM335x. Because of the inverted logic it was always returning '0' for all the reads, even for the outputs. It is now known to work with gpioiic(4) and gpioled(4). r261842: Add an OFW GPIO compatible bus. This allows the use of the DTS files to describe GPIO bindings in the system. Move the GPIOBUS lock macros to gpiobusvar.h as they are now shared between the OFW and the non OFW versions of GPIO bus. Export gpiobus_print_pins() so it can also be used on the OFW GPIO bus. r261843: Add OFW support to the in tree gpio compatible devices: gpioiic(4) and gpioled(4). Tested on RPi and BBB (using the hardware I2C controller and gpioiic(4) for the I2C tests). It was also verified for regressions on RSPRO (MIPS/ar71xx) used as reference for a non OFW-based system. Update the gpioled(4) and gpioiic(4) man pages with some details and examples about the FDT/OFW support. Some compatibility details pointed out by imp@ will follow in subsequent commits. r261844: Allow the use of OFW I2C bus together with iicbb(4) on OFW-based systems. This change makes ofw_iicbus attach to iicbb(4) controllers in addition to the already supported i2c host bridges (iichb). On iicbb(4) allow the direct access of the OFW parent node by its children, so they can be directly attached to iicbb(4) node on the DTS without the need of describing the i2c bus. r261845: Allow the use of the OFW GPIO bus for ti_gpio and bcm2835_gpio. With this change the gpio children can be described as directly connected to the GPIO controller without the need of describing the OFW GPIO bus itself on the DTS file. With this commit the OFW GPIO bus is fully functional on BBB and RPi. GPIO controllers which want to use the OFW GPIO bus will need similar changes. r261846: Make the gpioled(4) work out of the box on BBB. Add gpioled(4) to BEAGLEBONE kernel and add the description of the four on-board leds of beaglebone-black to its DTS file. r262194: Remove an unnecessary header. r262522: Fix make depend for iicbus. r262559: Inspired by r262522, fix make depend. This fixes the build of gpio modules. diff 266105 Thu May 15 01:44:32 MDT 2014 loos MFC r258046, r258047, r258050, r259035, r259036, r259037, r261842, r261843, r261844, r261845, r261846, r262194, r262522, r262559 r258046: Fix a typo on a comment in ofw_bus_if.m, the default method will return -1 when a node doesn't exist. r258047: Move the KASSERT() check to the point before the increase of number of pins. r258050: Fix gpiobus to return BUS_PROBE_GENERIC insted of BUS_PROBE_SPECIFIC (0) so it can be overriden by its OFW/FDT version. Give a chance for GPIO devices that implement the device_identify method to attach. r259035: Remove unnecessary includes and an unused softc variable. While here apply two minor style(9) fixes. r259036: Move the GPIOBUS_SET_PINFLAGS(..., ..., pin, GPIO_PIN_OUTPUT) to led(4) control callback function. This makes gpioled(4) works even if the pin is accidentally set to an input. r259037: Fix the pin value reading on AM335x. Because of the inverted logic it was always returning '0' for all the reads, even for the outputs. It is now known to work with gpioiic(4) and gpioled(4). r261842: Add an OFW GPIO compatible bus. This allows the use of the DTS files to describe GPIO bindings in the system. Move the GPIOBUS lock macros to gpiobusvar.h as they are now shared between the OFW and the non OFW versions of GPIO bus. Export gpiobus_print_pins() so it can also be used on the OFW GPIO bus. r261843: Add OFW support to the in tree gpio compatible devices: gpioiic(4) and gpioled(4). Tested on RPi and BBB (using the hardware I2C controller and gpioiic(4) for the I2C tests). It was also verified for regressions on RSPRO (MIPS/ar71xx) used as reference for a non OFW-based system. Update the gpioled(4) and gpioiic(4) man pages with some details and examples about the FDT/OFW support. Some compatibility details pointed out by imp@ will follow in subsequent commits. r261844: Allow the use of OFW I2C bus together with iicbb(4) on OFW-based systems. This change makes ofw_iicbus attach to iicbb(4) controllers in addition to the already supported i2c host bridges (iichb). On iicbb(4) allow the direct access of the OFW parent node by its children, so they can be directly attached to iicbb(4) node on the DTS without the need of describing the i2c bus. r261845: Allow the use of the OFW GPIO bus for ti_gpio and bcm2835_gpio. With this change the gpio children can be described as directly connected to the GPIO controller without the need of describing the OFW GPIO bus itself on the DTS file. With this commit the OFW GPIO bus is fully functional on BBB and RPi. GPIO controllers which want to use the OFW GPIO bus will need similar changes. r261846: Make the gpioled(4) work out of the box on BBB. Add gpioled(4) to BEAGLEBONE kernel and add the description of the four on-board leds of beaglebone-black to its DTS file. r262194: Remove an unnecessary header. r262522: Fix make depend for iicbus. r262559: Inspired by r262522, fix make depend. This fixes the build of gpio modules. diff 266105 Thu May 15 01:44:32 MDT 2014 loos MFC r258046, r258047, r258050, r259035, r259036, r259037, r261842, r261843, r261844, r261845, r261846, r262194, r262522, r262559 r258046: Fix a typo on a comment in ofw_bus_if.m, the default method will return -1 when a node doesn't exist. r258047: Move the KASSERT() check to the point before the increase of number of pins. r258050: Fix gpiobus to return BUS_PROBE_GENERIC insted of BUS_PROBE_SPECIFIC (0) so it can be overriden by its OFW/FDT version. Give a chance for GPIO devices that implement the device_identify method to attach. r259035: Remove unnecessary includes and an unused softc variable. While here apply two minor style(9) fixes. r259036: Move the GPIOBUS_SET_PINFLAGS(..., ..., pin, GPIO_PIN_OUTPUT) to led(4) control callback function. This makes gpioled(4) works even if the pin is accidentally set to an input. r259037: Fix the pin value reading on AM335x. Because of the inverted logic it was always returning '0' for all the reads, even for the outputs. It is now known to work with gpioiic(4) and gpioled(4). r261842: Add an OFW GPIO compatible bus. This allows the use of the DTS files to describe GPIO bindings in the system. Move the GPIOBUS lock macros to gpiobusvar.h as they are now shared between the OFW and the non OFW versions of GPIO bus. Export gpiobus_print_pins() so it can also be used on the OFW GPIO bus. r261843: Add OFW support to the in tree gpio compatible devices: gpioiic(4) and gpioled(4). Tested on RPi and BBB (using the hardware I2C controller and gpioiic(4) for the I2C tests). It was also verified for regressions on RSPRO (MIPS/ar71xx) used as reference for a non OFW-based system. Update the gpioled(4) and gpioiic(4) man pages with some details and examples about the FDT/OFW support. Some compatibility details pointed out by imp@ will follow in subsequent commits. r261844: Allow the use of OFW I2C bus together with iicbb(4) on OFW-based systems. This change makes ofw_iicbus attach to iicbb(4) controllers in addition to the already supported i2c host bridges (iichb). On iicbb(4) allow the direct access of the OFW parent node by its children, so they can be directly attached to iicbb(4) node on the DTS without the need of describing the i2c bus. r261845: Allow the use of the OFW GPIO bus for ti_gpio and bcm2835_gpio. With this change the gpio children can be described as directly connected to the GPIO controller without the need of describing the OFW GPIO bus itself on the DTS file. With this commit the OFW GPIO bus is fully functional on BBB and RPi. GPIO controllers which want to use the OFW GPIO bus will need similar changes. r261846: Make the gpioled(4) work out of the box on BBB. Add gpioled(4) to BEAGLEBONE kernel and add the description of the four on-board leds of beaglebone-black to its DTS file. r262194: Remove an unnecessary header. r262522: Fix make depend for iicbus. r262559: Inspired by r262522, fix make depend. This fixes the build of gpio modules. diff 266105 Thu May 15 01:44:32 MDT 2014 loos MFC r258046, r258047, r258050, r259035, r259036, r259037, r261842, r261843, r261844, r261845, r261846, r262194, r262522, r262559 r258046: Fix a typo on a comment in ofw_bus_if.m, the default method will return -1 when a node doesn't exist. r258047: Move the KASSERT() check to the point before the increase of number of pins. r258050: Fix gpiobus to return BUS_PROBE_GENERIC insted of BUS_PROBE_SPECIFIC (0) so it can be overriden by its OFW/FDT version. Give a chance for GPIO devices that implement the device_identify method to attach. r259035: Remove unnecessary includes and an unused softc variable. While here apply two minor style(9) fixes. r259036: Move the GPIOBUS_SET_PINFLAGS(..., ..., pin, GPIO_PIN_OUTPUT) to led(4) control callback function. This makes gpioled(4) works even if the pin is accidentally set to an input. r259037: Fix the pin value reading on AM335x. Because of the inverted logic it was always returning '0' for all the reads, even for the outputs. It is now known to work with gpioiic(4) and gpioled(4). r261842: Add an OFW GPIO compatible bus. This allows the use of the DTS files to describe GPIO bindings in the system. Move the GPIOBUS lock macros to gpiobusvar.h as they are now shared between the OFW and the non OFW versions of GPIO bus. Export gpiobus_print_pins() so it can also be used on the OFW GPIO bus. r261843: Add OFW support to the in tree gpio compatible devices: gpioiic(4) and gpioled(4). Tested on RPi and BBB (using the hardware I2C controller and gpioiic(4) for the I2C tests). It was also verified for regressions on RSPRO (MIPS/ar71xx) used as reference for a non OFW-based system. Update the gpioled(4) and gpioiic(4) man pages with some details and examples about the FDT/OFW support. Some compatibility details pointed out by imp@ will follow in subsequent commits. r261844: Allow the use of OFW I2C bus together with iicbb(4) on OFW-based systems. This change makes ofw_iicbus attach to iicbb(4) controllers in addition to the already supported i2c host bridges (iichb). On iicbb(4) allow the direct access of the OFW parent node by its children, so they can be directly attached to iicbb(4) node on the DTS without the need of describing the i2c bus. r261845: Allow the use of the OFW GPIO bus for ti_gpio and bcm2835_gpio. With this change the gpio children can be described as directly connected to the GPIO controller without the need of describing the OFW GPIO bus itself on the DTS file. With this commit the OFW GPIO bus is fully functional on BBB and RPi. GPIO controllers which want to use the OFW GPIO bus will need similar changes. r261846: Make the gpioled(4) work out of the box on BBB. Add gpioled(4) to BEAGLEBONE kernel and add the description of the four on-board leds of beaglebone-black to its DTS file. r262194: Remove an unnecessary header. r262522: Fix make depend for iicbus. r262559: Inspired by r262522, fix make depend. This fixes the build of gpio modules. diff 266105 Thu May 15 01:44:32 MDT 2014 loos MFC r258046, r258047, r258050, r259035, r259036, r259037, r261842, r261843, r261844, r261845, r261846, r262194, r262522, r262559 r258046: Fix a typo on a comment in ofw_bus_if.m, the default method will return -1 when a node doesn't exist. r258047: Move the KASSERT() check to the point before the increase of number of pins. r258050: Fix gpiobus to return BUS_PROBE_GENERIC insted of BUS_PROBE_SPECIFIC (0) so it can be overriden by its OFW/FDT version. Give a chance for GPIO devices that implement the device_identify method to attach. r259035: Remove unnecessary includes and an unused softc variable. While here apply two minor style(9) fixes. r259036: Move the GPIOBUS_SET_PINFLAGS(..., ..., pin, GPIO_PIN_OUTPUT) to led(4) control callback function. This makes gpioled(4) works even if the pin is accidentally set to an input. r259037: Fix the pin value reading on AM335x. Because of the inverted logic it was always returning '0' for all the reads, even for the outputs. It is now known to work with gpioiic(4) and gpioled(4). r261842: Add an OFW GPIO compatible bus. This allows the use of the DTS files to describe GPIO bindings in the system. Move the GPIOBUS lock macros to gpiobusvar.h as they are now shared between the OFW and the non OFW versions of GPIO bus. Export gpiobus_print_pins() so it can also be used on the OFW GPIO bus. r261843: Add OFW support to the in tree gpio compatible devices: gpioiic(4) and gpioled(4). Tested on RPi and BBB (using the hardware I2C controller and gpioiic(4) for the I2C tests). It was also verified for regressions on RSPRO (MIPS/ar71xx) used as reference for a non OFW-based system. Update the gpioled(4) and gpioiic(4) man pages with some details and examples about the FDT/OFW support. Some compatibility details pointed out by imp@ will follow in subsequent commits. r261844: Allow the use of OFW I2C bus together with iicbb(4) on OFW-based systems. This change makes ofw_iicbus attach to iicbb(4) controllers in addition to the already supported i2c host bridges (iichb). On iicbb(4) allow the direct access of the OFW parent node by its children, so they can be directly attached to iicbb(4) node on the DTS without the need of describing the i2c bus. r261845: Allow the use of the OFW GPIO bus for ti_gpio and bcm2835_gpio. With this change the gpio children can be described as directly connected to the GPIO controller without the need of describing the OFW GPIO bus itself on the DTS file. With this commit the OFW GPIO bus is fully functional on BBB and RPi. GPIO controllers which want to use the OFW GPIO bus will need similar changes. r261846: Make the gpioled(4) work out of the box on BBB. Add gpioled(4) to BEAGLEBONE kernel and add the description of the four on-board leds of beaglebone-black to its DTS file. r262194: Remove an unnecessary header. r262522: Fix make depend for iicbus. r262559: Inspired by r262522, fix make depend. This fixes the build of gpio modules. diff 266105 Thu May 15 01:44:32 MDT 2014 loos MFC r258046, r258047, r258050, r259035, r259036, r259037, r261842, r261843, r261844, r261845, r261846, r262194, r262522, r262559 r258046: Fix a typo on a comment in ofw_bus_if.m, the default method will return -1 when a node doesn't exist. r258047: Move the KASSERT() check to the point before the increase of number of pins. r258050: Fix gpiobus to return BUS_PROBE_GENERIC insted of BUS_PROBE_SPECIFIC (0) so it can be overriden by its OFW/FDT version. Give a chance for GPIO devices that implement the device_identify method to attach. r259035: Remove unnecessary includes and an unused softc variable. While here apply two minor style(9) fixes. r259036: Move the GPIOBUS_SET_PINFLAGS(..., ..., pin, GPIO_PIN_OUTPUT) to led(4) control callback function. This makes gpioled(4) works even if the pin is accidentally set to an input. r259037: Fix the pin value reading on AM335x. Because of the inverted logic it was always returning '0' for all the reads, even for the outputs. It is now known to work with gpioiic(4) and gpioled(4). r261842: Add an OFW GPIO compatible bus. This allows the use of the DTS files to describe GPIO bindings in the system. Move the GPIOBUS lock macros to gpiobusvar.h as they are now shared between the OFW and the non OFW versions of GPIO bus. Export gpiobus_print_pins() so it can also be used on the OFW GPIO bus. r261843: Add OFW support to the in tree gpio compatible devices: gpioiic(4) and gpioled(4). Tested on RPi and BBB (using the hardware I2C controller and gpioiic(4) for the I2C tests). It was also verified for regressions on RSPRO (MIPS/ar71xx) used as reference for a non OFW-based system. Update the gpioled(4) and gpioiic(4) man pages with some details and examples about the FDT/OFW support. Some compatibility details pointed out by imp@ will follow in subsequent commits. r261844: Allow the use of OFW I2C bus together with iicbb(4) on OFW-based systems. This change makes ofw_iicbus attach to iicbb(4) controllers in addition to the already supported i2c host bridges (iichb). On iicbb(4) allow the direct access of the OFW parent node by its children, so they can be directly attached to iicbb(4) node on the DTS without the need of describing the i2c bus. r261845: Allow the use of the OFW GPIO bus for ti_gpio and bcm2835_gpio. With this change the gpio children can be described as directly connected to the GPIO controller without the need of describing the OFW GPIO bus itself on the DTS file. With this commit the OFW GPIO bus is fully functional on BBB and RPi. GPIO controllers which want to use the OFW GPIO bus will need similar changes. r261846: Make the gpioled(4) work out of the box on BBB. Add gpioled(4) to BEAGLEBONE kernel and add the description of the four on-board leds of beaglebone-black to its DTS file. r262194: Remove an unnecessary header. r262522: Fix make depend for iicbus. r262559: Inspired by r262522, fix make depend. This fixes the build of gpio modules. diff 266105 Thu May 15 01:44:32 MDT 2014 loos MFC r258046, r258047, r258050, r259035, r259036, r259037, r261842, r261843, r261844, r261845, r261846, r262194, r262522, r262559 r258046: Fix a typo on a comment in ofw_bus_if.m, the default method will return -1 when a node doesn't exist. r258047: Move the KASSERT() check to the point before the increase of number of pins. r258050: Fix gpiobus to return BUS_PROBE_GENERIC insted of BUS_PROBE_SPECIFIC (0) so it can be overriden by its OFW/FDT version. Give a chance for GPIO devices that implement the device_identify method to attach. r259035: Remove unnecessary includes and an unused softc variable. While here apply two minor style(9) fixes. r259036: Move the GPIOBUS_SET_PINFLAGS(..., ..., pin, GPIO_PIN_OUTPUT) to led(4) control callback function. This makes gpioled(4) works even if the pin is accidentally set to an input. r259037: Fix the pin value reading on AM335x. Because of the inverted logic it was always returning '0' for all the reads, even for the outputs. It is now known to work with gpioiic(4) and gpioled(4). r261842: Add an OFW GPIO compatible bus. This allows the use of the DTS files to describe GPIO bindings in the system. Move the GPIOBUS lock macros to gpiobusvar.h as they are now shared between the OFW and the non OFW versions of GPIO bus. Export gpiobus_print_pins() so it can also be used on the OFW GPIO bus. r261843: Add OFW support to the in tree gpio compatible devices: gpioiic(4) and gpioled(4). Tested on RPi and BBB (using the hardware I2C controller and gpioiic(4) for the I2C tests). It was also verified for regressions on RSPRO (MIPS/ar71xx) used as reference for a non OFW-based system. Update the gpioled(4) and gpioiic(4) man pages with some details and examples about the FDT/OFW support. Some compatibility details pointed out by imp@ will follow in subsequent commits. r261844: Allow the use of OFW I2C bus together with iicbb(4) on OFW-based systems. This change makes ofw_iicbus attach to iicbb(4) controllers in addition to the already supported i2c host bridges (iichb). On iicbb(4) allow the direct access of the OFW parent node by its children, so they can be directly attached to iicbb(4) node on the DTS without the need of describing the i2c bus. r261845: Allow the use of the OFW GPIO bus for ti_gpio and bcm2835_gpio. With this change the gpio children can be described as directly connected to the GPIO controller without the need of describing the OFW GPIO bus itself on the DTS file. With this commit the OFW GPIO bus is fully functional on BBB and RPi. GPIO controllers which want to use the OFW GPIO bus will need similar changes. r261846: Make the gpioled(4) work out of the box on BBB. Add gpioled(4) to BEAGLEBONE kernel and add the description of the four on-board leds of beaglebone-black to its DTS file. r262194: Remove an unnecessary header. r262522: Fix make depend for iicbus. r262559: Inspired by r262522, fix make depend. This fixes the build of gpio modules. diff 266105 Thu May 15 01:44:32 MDT 2014 loos MFC r258046, r258047, r258050, r259035, r259036, r259037, r261842, r261843, r261844, r261845, r261846, r262194, r262522, r262559 r258046: Fix a typo on a comment in ofw_bus_if.m, the default method will return -1 when a node doesn't exist. r258047: Move the KASSERT() check to the point before the increase of number of pins. r258050: Fix gpiobus to return BUS_PROBE_GENERIC insted of BUS_PROBE_SPECIFIC (0) so it can be overriden by its OFW/FDT version. Give a chance for GPIO devices that implement the device_identify method to attach. r259035: Remove unnecessary includes and an unused softc variable. While here apply two minor style(9) fixes. r259036: Move the GPIOBUS_SET_PINFLAGS(..., ..., pin, GPIO_PIN_OUTPUT) to led(4) control callback function. This makes gpioled(4) works even if the pin is accidentally set to an input. r259037: Fix the pin value reading on AM335x. Because of the inverted logic it was always returning '0' for all the reads, even for the outputs. It is now known to work with gpioiic(4) and gpioled(4). r261842: Add an OFW GPIO compatible bus. This allows the use of the DTS files to describe GPIO bindings in the system. Move the GPIOBUS lock macros to gpiobusvar.h as they are now shared between the OFW and the non OFW versions of GPIO bus. Export gpiobus_print_pins() so it can also be used on the OFW GPIO bus. r261843: Add OFW support to the in tree gpio compatible devices: gpioiic(4) and gpioled(4). Tested on RPi and BBB (using the hardware I2C controller and gpioiic(4) for the I2C tests). It was also verified for regressions on RSPRO (MIPS/ar71xx) used as reference for a non OFW-based system. Update the gpioled(4) and gpioiic(4) man pages with some details and examples about the FDT/OFW support. Some compatibility details pointed out by imp@ will follow in subsequent commits. r261844: Allow the use of OFW I2C bus together with iicbb(4) on OFW-based systems. This change makes ofw_iicbus attach to iicbb(4) controllers in addition to the already supported i2c host bridges (iichb). On iicbb(4) allow the direct access of the OFW parent node by its children, so they can be directly attached to iicbb(4) node on the DTS without the need of describing the i2c bus. r261845: Allow the use of the OFW GPIO bus for ti_gpio and bcm2835_gpio. With this change the gpio children can be described as directly connected to the GPIO controller without the need of describing the OFW GPIO bus itself on the DTS file. With this commit the OFW GPIO bus is fully functional on BBB and RPi. GPIO controllers which want to use the OFW GPIO bus will need similar changes. r261846: Make the gpioled(4) work out of the box on BBB. Add gpioled(4) to BEAGLEBONE kernel and add the description of the four on-board leds of beaglebone-black to its DTS file. r262194: Remove an unnecessary header. r262522: Fix make depend for iicbus. r262559: Inspired by r262522, fix make depend. This fixes the build of gpio modules. diff 266105 Thu May 15 01:44:32 MDT 2014 loos MFC r258046, r258047, r258050, r259035, r259036, r259037, r261842, r261843, r261844, r261845, r261846, r262194, r262522, r262559 r258046: Fix a typo on a comment in ofw_bus_if.m, the default method will return -1 when a node doesn't exist. r258047: Move the KASSERT() check to the point before the increase of number of pins. r258050: Fix gpiobus to return BUS_PROBE_GENERIC insted of BUS_PROBE_SPECIFIC (0) so it can be overriden by its OFW/FDT version. Give a chance for GPIO devices that implement the device_identify method to attach. r259035: Remove unnecessary includes and an unused softc variable. While here apply two minor style(9) fixes. r259036: Move the GPIOBUS_SET_PINFLAGS(..., ..., pin, GPIO_PIN_OUTPUT) to led(4) control callback function. This makes gpioled(4) works even if the pin is accidentally set to an input. r259037: Fix the pin value reading on AM335x. Because of the inverted logic it was always returning '0' for all the reads, even for the outputs. It is now known to work with gpioiic(4) and gpioled(4). r261842: Add an OFW GPIO compatible bus. This allows the use of the DTS files to describe GPIO bindings in the system. Move the GPIOBUS lock macros to gpiobusvar.h as they are now shared between the OFW and the non OFW versions of GPIO bus. Export gpiobus_print_pins() so it can also be used on the OFW GPIO bus. r261843: Add OFW support to the in tree gpio compatible devices: gpioiic(4) and gpioled(4). Tested on RPi and BBB (using the hardware I2C controller and gpioiic(4) for the I2C tests). It was also verified for regressions on RSPRO (MIPS/ar71xx) used as reference for a non OFW-based system. Update the gpioled(4) and gpioiic(4) man pages with some details and examples about the FDT/OFW support. Some compatibility details pointed out by imp@ will follow in subsequent commits. r261844: Allow the use of OFW I2C bus together with iicbb(4) on OFW-based systems. This change makes ofw_iicbus attach to iicbb(4) controllers in addition to the already supported i2c host bridges (iichb). On iicbb(4) allow the direct access of the OFW parent node by its children, so they can be directly attached to iicbb(4) node on the DTS without the need of describing the i2c bus. r261845: Allow the use of the OFW GPIO bus for ti_gpio and bcm2835_gpio. With this change the gpio children can be described as directly connected to the GPIO controller without the need of describing the OFW GPIO bus itself on the DTS file. With this commit the OFW GPIO bus is fully functional on BBB and RPi. GPIO controllers which want to use the OFW GPIO bus will need similar changes. r261846: Make the gpioled(4) work out of the box on BBB. Add gpioled(4) to BEAGLEBONE kernel and add the description of the four on-board leds of beaglebone-black to its DTS file. r262194: Remove an unnecessary header. r262522: Fix make depend for iicbus. r262559: Inspired by r262522, fix make depend. This fixes the build of gpio modules. diff 266105 Thu May 15 01:44:32 MDT 2014 loos MFC r258046, r258047, r258050, r259035, r259036, r259037, r261842, r261843, r261844, r261845, r261846, r262194, r262522, r262559 r258046: Fix a typo on a comment in ofw_bus_if.m, the default method will return -1 when a node doesn't exist. r258047: Move the KASSERT() check to the point before the increase of number of pins. r258050: Fix gpiobus to return BUS_PROBE_GENERIC insted of BUS_PROBE_SPECIFIC (0) so it can be overriden by its OFW/FDT version. Give a chance for GPIO devices that implement the device_identify method to attach. r259035: Remove unnecessary includes and an unused softc variable. While here apply two minor style(9) fixes. r259036: Move the GPIOBUS_SET_PINFLAGS(..., ..., pin, GPIO_PIN_OUTPUT) to led(4) control callback function. This makes gpioled(4) works even if the pin is accidentally set to an input. r259037: Fix the pin value reading on AM335x. Because of the inverted logic it was always returning '0' for all the reads, even for the outputs. It is now known to work with gpioiic(4) and gpioled(4). r261842: Add an OFW GPIO compatible bus. This allows the use of the DTS files to describe GPIO bindings in the system. Move the GPIOBUS lock macros to gpiobusvar.h as they are now shared between the OFW and the non OFW versions of GPIO bus. Export gpiobus_print_pins() so it can also be used on the OFW GPIO bus. r261843: Add OFW support to the in tree gpio compatible devices: gpioiic(4) and gpioled(4). Tested on RPi and BBB (using the hardware I2C controller and gpioiic(4) for the I2C tests). It was also verified for regressions on RSPRO (MIPS/ar71xx) used as reference for a non OFW-based system. Update the gpioled(4) and gpioiic(4) man pages with some details and examples about the FDT/OFW support. Some compatibility details pointed out by imp@ will follow in subsequent commits. r261844: Allow the use of OFW I2C bus together with iicbb(4) on OFW-based systems. This change makes ofw_iicbus attach to iicbb(4) controllers in addition to the already supported i2c host bridges (iichb). On iicbb(4) allow the direct access of the OFW parent node by its children, so they can be directly attached to iicbb(4) node on the DTS without the need of describing the i2c bus. r261845: Allow the use of the OFW GPIO bus for ti_gpio and bcm2835_gpio. With this change the gpio children can be described as directly connected to the GPIO controller without the need of describing the OFW GPIO bus itself on the DTS file. With this commit the OFW GPIO bus is fully functional on BBB and RPi. GPIO controllers which want to use the OFW GPIO bus will need similar changes. r261846: Make the gpioled(4) work out of the box on BBB. Add gpioled(4) to BEAGLEBONE kernel and add the description of the four on-board leds of beaglebone-black to its DTS file. r262194: Remove an unnecessary header. r262522: Fix make depend for iicbus. r262559: Inspired by r262522, fix make depend. This fixes the build of gpio modules. diff 266105 Thu May 15 01:44:32 MDT 2014 loos MFC r258046, r258047, r258050, r259035, r259036, r259037, r261842, r261843, r261844, r261845, r261846, r262194, r262522, r262559 r258046: Fix a typo on a comment in ofw_bus_if.m, the default method will return -1 when a node doesn't exist. r258047: Move the KASSERT() check to the point before the increase of number of pins. r258050: Fix gpiobus to return BUS_PROBE_GENERIC insted of BUS_PROBE_SPECIFIC (0) so it can be overriden by its OFW/FDT version. Give a chance for GPIO devices that implement the device_identify method to attach. r259035: Remove unnecessary includes and an unused softc variable. While here apply two minor style(9) fixes. r259036: Move the GPIOBUS_SET_PINFLAGS(..., ..., pin, GPIO_PIN_OUTPUT) to led(4) control callback function. This makes gpioled(4) works even if the pin is accidentally set to an input. r259037: Fix the pin value reading on AM335x. Because of the inverted logic it was always returning '0' for all the reads, even for the outputs. It is now known to work with gpioiic(4) and gpioled(4). r261842: Add an OFW GPIO compatible bus. This allows the use of the DTS files to describe GPIO bindings in the system. Move the GPIOBUS lock macros to gpiobusvar.h as they are now shared between the OFW and the non OFW versions of GPIO bus. Export gpiobus_print_pins() so it can also be used on the OFW GPIO bus. r261843: Add OFW support to the in tree gpio compatible devices: gpioiic(4) and gpioled(4). Tested on RPi and BBB (using the hardware I2C controller and gpioiic(4) for the I2C tests). It was also verified for regressions on RSPRO (MIPS/ar71xx) used as reference for a non OFW-based system. Update the gpioled(4) and gpioiic(4) man pages with some details and examples about the FDT/OFW support. Some compatibility details pointed out by imp@ will follow in subsequent commits. r261844: Allow the use of OFW I2C bus together with iicbb(4) on OFW-based systems. This change makes ofw_iicbus attach to iicbb(4) controllers in addition to the already supported i2c host bridges (iichb). On iicbb(4) allow the direct access of the OFW parent node by its children, so they can be directly attached to iicbb(4) node on the DTS without the need of describing the i2c bus. r261845: Allow the use of the OFW GPIO bus for ti_gpio and bcm2835_gpio. With this change the gpio children can be described as directly connected to the GPIO controller without the need of describing the OFW GPIO bus itself on the DTS file. With this commit the OFW GPIO bus is fully functional on BBB and RPi. GPIO controllers which want to use the OFW GPIO bus will need similar changes. r261846: Make the gpioled(4) work out of the box on BBB. Add gpioled(4) to BEAGLEBONE kernel and add the description of the four on-board leds of beaglebone-black to its DTS file. r262194: Remove an unnecessary header. r262522: Fix make depend for iicbus. r262559: Inspired by r262522, fix make depend. This fixes the build of gpio modules. diff 266105 Thu May 15 01:44:32 MDT 2014 loos MFC r258046, r258047, r258050, r259035, r259036, r259037, r261842, r261843, r261844, r261845, r261846, r262194, r262522, r262559 r258046: Fix a typo on a comment in ofw_bus_if.m, the default method will return -1 when a node doesn't exist. r258047: Move the KASSERT() check to the point before the increase of number of pins. r258050: Fix gpiobus to return BUS_PROBE_GENERIC insted of BUS_PROBE_SPECIFIC (0) so it can be overriden by its OFW/FDT version. Give a chance for GPIO devices that implement the device_identify method to attach. r259035: Remove unnecessary includes and an unused softc variable. While here apply two minor style(9) fixes. r259036: Move the GPIOBUS_SET_PINFLAGS(..., ..., pin, GPIO_PIN_OUTPUT) to led(4) control callback function. This makes gpioled(4) works even if the pin is accidentally set to an input. r259037: Fix the pin value reading on AM335x. Because of the inverted logic it was always returning '0' for all the reads, even for the outputs. It is now known to work with gpioiic(4) and gpioled(4). r261842: Add an OFW GPIO compatible bus. This allows the use of the DTS files to describe GPIO bindings in the system. Move the GPIOBUS lock macros to gpiobusvar.h as they are now shared between the OFW and the non OFW versions of GPIO bus. Export gpiobus_print_pins() so it can also be used on the OFW GPIO bus. r261843: Add OFW support to the in tree gpio compatible devices: gpioiic(4) and gpioled(4). Tested on RPi and BBB (using the hardware I2C controller and gpioiic(4) for the I2C tests). It was also verified for regressions on RSPRO (MIPS/ar71xx) used as reference for a non OFW-based system. Update the gpioled(4) and gpioiic(4) man pages with some details and examples about the FDT/OFW support. Some compatibility details pointed out by imp@ will follow in subsequent commits. r261844: Allow the use of OFW I2C bus together with iicbb(4) on OFW-based systems. This change makes ofw_iicbus attach to iicbb(4) controllers in addition to the already supported i2c host bridges (iichb). On iicbb(4) allow the direct access of the OFW parent node by its children, so they can be directly attached to iicbb(4) node on the DTS without the need of describing the i2c bus. r261845: Allow the use of the OFW GPIO bus for ti_gpio and bcm2835_gpio. With this change the gpio children can be described as directly connected to the GPIO controller without the need of describing the OFW GPIO bus itself on the DTS file. With this commit the OFW GPIO bus is fully functional on BBB and RPi. GPIO controllers which want to use the OFW GPIO bus will need similar changes. r261846: Make the gpioled(4) work out of the box on BBB. Add gpioled(4) to BEAGLEBONE kernel and add the description of the four on-board leds of beaglebone-black to its DTS file. r262194: Remove an unnecessary header. r262522: Fix make depend for iicbus. r262559: Inspired by r262522, fix make depend. This fixes the build of gpio modules. diff 266105 Thu May 15 01:44:32 MDT 2014 loos MFC r258046, r258047, r258050, r259035, r259036, r259037, r261842, r261843, r261844, r261845, r261846, r262194, r262522, r262559 r258046: Fix a typo on a comment in ofw_bus_if.m, the default method will return -1 when a node doesn't exist. r258047: Move the KASSERT() check to the point before the increase of number of pins. r258050: Fix gpiobus to return BUS_PROBE_GENERIC insted of BUS_PROBE_SPECIFIC (0) so it can be overriden by its OFW/FDT version. Give a chance for GPIO devices that implement the device_identify method to attach. r259035: Remove unnecessary includes and an unused softc variable. While here apply two minor style(9) fixes. r259036: Move the GPIOBUS_SET_PINFLAGS(..., ..., pin, GPIO_PIN_OUTPUT) to led(4) control callback function. This makes gpioled(4) works even if the pin is accidentally set to an input. r259037: Fix the pin value reading on AM335x. Because of the inverted logic it was always returning '0' for all the reads, even for the outputs. It is now known to work with gpioiic(4) and gpioled(4). r261842: Add an OFW GPIO compatible bus. This allows the use of the DTS files to describe GPIO bindings in the system. Move the GPIOBUS lock macros to gpiobusvar.h as they are now shared between the OFW and the non OFW versions of GPIO bus. Export gpiobus_print_pins() so it can also be used on the OFW GPIO bus. r261843: Add OFW support to the in tree gpio compatible devices: gpioiic(4) and gpioled(4). Tested on RPi and BBB (using the hardware I2C controller and gpioiic(4) for the I2C tests). It was also verified for regressions on RSPRO (MIPS/ar71xx) used as reference for a non OFW-based system. Update the gpioled(4) and gpioiic(4) man pages with some details and examples about the FDT/OFW support. Some compatibility details pointed out by imp@ will follow in subsequent commits. r261844: Allow the use of OFW I2C bus together with iicbb(4) on OFW-based systems. This change makes ofw_iicbus attach to iicbb(4) controllers in addition to the already supported i2c host bridges (iichb). On iicbb(4) allow the direct access of the OFW parent node by its children, so they can be directly attached to iicbb(4) node on the DTS without the need of describing the i2c bus. r261845: Allow the use of the OFW GPIO bus for ti_gpio and bcm2835_gpio. With this change the gpio children can be described as directly connected to the GPIO controller without the need of describing the OFW GPIO bus itself on the DTS file. With this commit the OFW GPIO bus is fully functional on BBB and RPi. GPIO controllers which want to use the OFW GPIO bus will need similar changes. r261846: Make the gpioled(4) work out of the box on BBB. Add gpioled(4) to BEAGLEBONE kernel and add the description of the four on-board leds of beaglebone-black to its DTS file. r262194: Remove an unnecessary header. r262522: Fix make depend for iicbus. r262559: Inspired by r262522, fix make depend. This fixes the build of gpio modules. diff 266105 Thu May 15 01:44:32 MDT 2014 loos MFC r258046, r258047, r258050, r259035, r259036, r259037, r261842, r261843, r261844, r261845, r261846, r262194, r262522, r262559 r258046: Fix a typo on a comment in ofw_bus_if.m, the default method will return -1 when a node doesn't exist. r258047: Move the KASSERT() check to the point before the increase of number of pins. r258050: Fix gpiobus to return BUS_PROBE_GENERIC insted of BUS_PROBE_SPECIFIC (0) so it can be overriden by its OFW/FDT version. Give a chance for GPIO devices that implement the device_identify method to attach. r259035: Remove unnecessary includes and an unused softc variable. While here apply two minor style(9) fixes. r259036: Move the GPIOBUS_SET_PINFLAGS(..., ..., pin, GPIO_PIN_OUTPUT) to led(4) control callback function. This makes gpioled(4) works even if the pin is accidentally set to an input. r259037: Fix the pin value reading on AM335x. Because of the inverted logic it was always returning '0' for all the reads, even for the outputs. It is now known to work with gpioiic(4) and gpioled(4). r261842: Add an OFW GPIO compatible bus. This allows the use of the DTS files to describe GPIO bindings in the system. Move the GPIOBUS lock macros to gpiobusvar.h as they are now shared between the OFW and the non OFW versions of GPIO bus. Export gpiobus_print_pins() so it can also be used on the OFW GPIO bus. r261843: Add OFW support to the in tree gpio compatible devices: gpioiic(4) and gpioled(4). Tested on RPi and BBB (using the hardware I2C controller and gpioiic(4) for the I2C tests). It was also verified for regressions on RSPRO (MIPS/ar71xx) used as reference for a non OFW-based system. Update the gpioled(4) and gpioiic(4) man pages with some details and examples about the FDT/OFW support. Some compatibility details pointed out by imp@ will follow in subsequent commits. r261844: Allow the use of OFW I2C bus together with iicbb(4) on OFW-based systems. This change makes ofw_iicbus attach to iicbb(4) controllers in addition to the already supported i2c host bridges (iichb). On iicbb(4) allow the direct access of the OFW parent node by its children, so they can be directly attached to iicbb(4) node on the DTS without the need of describing the i2c bus. r261845: Allow the use of the OFW GPIO bus for ti_gpio and bcm2835_gpio. With this change the gpio children can be described as directly connected to the GPIO controller without the need of describing the OFW GPIO bus itself on the DTS file. With this commit the OFW GPIO bus is fully functional on BBB and RPi. GPIO controllers which want to use the OFW GPIO bus will need similar changes. r261846: Make the gpioled(4) work out of the box on BBB. Add gpioled(4) to BEAGLEBONE kernel and add the description of the four on-board leds of beaglebone-black to its DTS file. r262194: Remove an unnecessary header. r262522: Fix make depend for iicbus. r262559: Inspired by r262522, fix make depend. This fixes the build of gpio modules. diff 266105 Thu May 15 01:44:32 MDT 2014 loos MFC r258046, r258047, r258050, r259035, r259036, r259037, r261842, r261843, r261844, r261845, r261846, r262194, r262522, r262559 r258046: Fix a typo on a comment in ofw_bus_if.m, the default method will return -1 when a node doesn't exist. r258047: Move the KASSERT() check to the point before the increase of number of pins. r258050: Fix gpiobus to return BUS_PROBE_GENERIC insted of BUS_PROBE_SPECIFIC (0) so it can be overriden by its OFW/FDT version. Give a chance for GPIO devices that implement the device_identify method to attach. r259035: Remove unnecessary includes and an unused softc variable. While here apply two minor style(9) fixes. r259036: Move the GPIOBUS_SET_PINFLAGS(..., ..., pin, GPIO_PIN_OUTPUT) to led(4) control callback function. This makes gpioled(4) works even if the pin is accidentally set to an input. r259037: Fix the pin value reading on AM335x. Because of the inverted logic it was always returning '0' for all the reads, even for the outputs. It is now known to work with gpioiic(4) and gpioled(4). r261842: Add an OFW GPIO compatible bus. This allows the use of the DTS files to describe GPIO bindings in the system. Move the GPIOBUS lock macros to gpiobusvar.h as they are now shared between the OFW and the non OFW versions of GPIO bus. Export gpiobus_print_pins() so it can also be used on the OFW GPIO bus. r261843: Add OFW support to the in tree gpio compatible devices: gpioiic(4) and gpioled(4). Tested on RPi and BBB (using the hardware I2C controller and gpioiic(4) for the I2C tests). It was also verified for regressions on RSPRO (MIPS/ar71xx) used as reference for a non OFW-based system. Update the gpioled(4) and gpioiic(4) man pages with some details and examples about the FDT/OFW support. Some compatibility details pointed out by imp@ will follow in subsequent commits. r261844: Allow the use of OFW I2C bus together with iicbb(4) on OFW-based systems. This change makes ofw_iicbus attach to iicbb(4) controllers in addition to the already supported i2c host bridges (iichb). On iicbb(4) allow the direct access of the OFW parent node by its children, so they can be directly attached to iicbb(4) node on the DTS without the need of describing the i2c bus. r261845: Allow the use of the OFW GPIO bus for ti_gpio and bcm2835_gpio. With this change the gpio children can be described as directly connected to the GPIO controller without the need of describing the OFW GPIO bus itself on the DTS file. With this commit the OFW GPIO bus is fully functional on BBB and RPi. GPIO controllers which want to use the OFW GPIO bus will need similar changes. r261846: Make the gpioled(4) work out of the box on BBB. Add gpioled(4) to BEAGLEBONE kernel and add the description of the four on-board leds of beaglebone-black to its DTS file. r262194: Remove an unnecessary header. r262522: Fix make depend for iicbus. r262559: Inspired by r262522, fix make depend. This fixes the build of gpio modules. |
| /freebsd-10.2-release/sys/dev/uart/ | ||
| H A D | uart_bus_acpi.c | diff 200820 Mon Dec 21 22:57:56 MST 2009 gavin Support the tablet in (at least) the Toshiba Portege M200 Tablet PC. This device only appears on the ACPI bus, so isn't caught by the current entry for it in the uart(4) ISA attachment. PR: kern/140172 Reviewed by: jhb, marcel Approved by: ed (mentor) MFC after: 2 weeks 119815 Sat Sep 06 23:13:47 MDT 2003 marcel The uart(4) driver is an universal driver for various UART hardware. It improves on sio(4) in the following areas: o Fully newbusified to allow for memory mapped I/O. This is a must for ia64 and sparc64, o Machine dependent code to take full advantage of machine and firm- ware specific ways to define serial consoles and/or debug ports. o Hardware abstraction layer to allow the driver to be used with various UARTs, such as the well-known ns8250 family of UARTs, the Siemens sab82532 or the Zilog Z8530. This is especially important for pc98 and sparc64 where it's common to have different UARTs, o The notion of system devices to unkludge low-level consoles and remote gdb ports and provides the mechanics necessary to support the keyboard on sparc64 (which is UART based). o The notion of a kernel interface so that a UART can be tied to something other than the well-known TTY interface. This is needed on sparc64 to present the user with a device and ioctl handling suitable for a keyboard, but also allows us to cleanly hide an UART when used as a debug port. Following is a list of features and bugs/flaws specific to the ns8250 family of UARTs as compared to their support in sio(4): o The uart(4) driver determines the FIFO size and automaticly takes advantages of larger FIFOs and/or additional features. Note that since I don't have sufficient access to 16[679]5x UARTs, hardware flow control has not been enabled. This is almost trivial to do, provided one can test. The downside of this is that broken UARTs are more likely to not work correctly with uart(4). The need for tunables or knobs may be large enough to warrant their creation. o The uart(4) driver does not share the same bumpy history as sio(4) and will therefore not provide the necessary hooks, tweaks, quirks or work-arounds to deal with once common hardware. To that extend, uart(4) supports a subset of the UARTs that sio(4) supports. The question before us is whether the subset is sufficient for current hardware. o There is no support for multiport UARTs in uart(4). The decision behind this is that uart(4) deals with one EIA RS232-C interface. Packaging of multiple interfaces in a single chip or on a single expansion board is beyond the scope of uart(4) and is now mostly left for puc(4) to deal with. Lack of hardware made it impossible to actually implement such a dependency other than is present for the dual channel SAB82532 and Z8350 SCCs. The current list of missing features is: o No configuration capabilities. A set of tunables and sysctls is being worked out. There are likely not going to be any or much compile-time knobs. Such configuration does not fit well with current hardware. o No support for the PPS API. This is partly dependent on the ability to configure uart(4) and partly dependent on having sufficient information to implement it properly. As usual, the manpage is present but lacks the attention the software has gotten. 119815 Sat Sep 06 23:13:47 MDT 2003 marcel The uart(4) driver is an universal driver for various UART hardware. It improves on sio(4) in the following areas: o Fully newbusified to allow for memory mapped I/O. This is a must for ia64 and sparc64, o Machine dependent code to take full advantage of machine and firm- ware specific ways to define serial consoles and/or debug ports. o Hardware abstraction layer to allow the driver to be used with various UARTs, such as the well-known ns8250 family of UARTs, the Siemens sab82532 or the Zilog Z8530. This is especially important for pc98 and sparc64 where it's common to have different UARTs, o The notion of system devices to unkludge low-level consoles and remote gdb ports and provides the mechanics necessary to support the keyboard on sparc64 (which is UART based). o The notion of a kernel interface so that a UART can be tied to something other than the well-known TTY interface. This is needed on sparc64 to present the user with a device and ioctl handling suitable for a keyboard, but also allows us to cleanly hide an UART when used as a debug port. Following is a list of features and bugs/flaws specific to the ns8250 family of UARTs as compared to their support in sio(4): o The uart(4) driver determines the FIFO size and automaticly takes advantages of larger FIFOs and/or additional features. Note that since I don't have sufficient access to 16[679]5x UARTs, hardware flow control has not been enabled. This is almost trivial to do, provided one can test. The downside of this is that broken UARTs are more likely to not work correctly with uart(4). The need for tunables or knobs may be large enough to warrant their creation. o The uart(4) driver does not share the same bumpy history as sio(4) and will therefore not provide the necessary hooks, tweaks, quirks or work-arounds to deal with once common hardware. To that extend, uart(4) supports a subset of the UARTs that sio(4) supports. The question before us is whether the subset is sufficient for current hardware. o There is no support for multiport UARTs in uart(4). The decision behind this is that uart(4) deals with one EIA RS232-C interface. Packaging of multiple interfaces in a single chip or on a single expansion board is beyond the scope of uart(4) and is now mostly left for puc(4) to deal with. Lack of hardware made it impossible to actually implement such a dependency other than is present for the dual channel SAB82532 and Z8350 SCCs. The current list of missing features is: o No configuration capabilities. A set of tunables and sysctls is being worked out. There are likely not going to be any or much compile-time knobs. Such configuration does not fit well with current hardware. o No support for the PPS API. This is partly dependent on the ability to configure uart(4) and partly dependent on having sufficient information to implement it properly. As usual, the manpage is present but lacks the attention the software has gotten. 119815 Sat Sep 06 23:13:47 MDT 2003 marcel The uart(4) driver is an universal driver for various UART hardware. It improves on sio(4) in the following areas: o Fully newbusified to allow for memory mapped I/O. This is a must for ia64 and sparc64, o Machine dependent code to take full advantage of machine and firm- ware specific ways to define serial consoles and/or debug ports. o Hardware abstraction layer to allow the driver to be used with various UARTs, such as the well-known ns8250 family of UARTs, the Siemens sab82532 or the Zilog Z8530. This is especially important for pc98 and sparc64 where it's common to have different UARTs, o The notion of system devices to unkludge low-level consoles and remote gdb ports and provides the mechanics necessary to support the keyboard on sparc64 (which is UART based). o The notion of a kernel interface so that a UART can be tied to something other than the well-known TTY interface. This is needed on sparc64 to present the user with a device and ioctl handling suitable for a keyboard, but also allows us to cleanly hide an UART when used as a debug port. Following is a list of features and bugs/flaws specific to the ns8250 family of UARTs as compared to their support in sio(4): o The uart(4) driver determines the FIFO size and automaticly takes advantages of larger FIFOs and/or additional features. Note that since I don't have sufficient access to 16[679]5x UARTs, hardware flow control has not been enabled. This is almost trivial to do, provided one can test. The downside of this is that broken UARTs are more likely to not work correctly with uart(4). The need for tunables or knobs may be large enough to warrant their creation. o The uart(4) driver does not share the same bumpy history as sio(4) and will therefore not provide the necessary hooks, tweaks, quirks or work-arounds to deal with once common hardware. To that extend, uart(4) supports a subset of the UARTs that sio(4) supports. The question before us is whether the subset is sufficient for current hardware. o There is no support for multiport UARTs in uart(4). The decision behind this is that uart(4) deals with one EIA RS232-C interface. Packaging of multiple interfaces in a single chip or on a single expansion board is beyond the scope of uart(4) and is now mostly left for puc(4) to deal with. Lack of hardware made it impossible to actually implement such a dependency other than is present for the dual channel SAB82532 and Z8350 SCCs. The current list of missing features is: o No configuration capabilities. A set of tunables and sysctls is being worked out. There are likely not going to be any or much compile-time knobs. Such configuration does not fit well with current hardware. o No support for the PPS API. This is partly dependent on the ability to configure uart(4) and partly dependent on having sufficient information to implement it properly. As usual, the manpage is present but lacks the attention the software has gotten. 119815 Sat Sep 06 23:13:47 MDT 2003 marcel The uart(4) driver is an universal driver for various UART hardware. It improves on sio(4) in the following areas: o Fully newbusified to allow for memory mapped I/O. This is a must for ia64 and sparc64, o Machine dependent code to take full advantage of machine and firm- ware specific ways to define serial consoles and/or debug ports. o Hardware abstraction layer to allow the driver to be used with various UARTs, such as the well-known ns8250 family of UARTs, the Siemens sab82532 or the Zilog Z8530. This is especially important for pc98 and sparc64 where it's common to have different UARTs, o The notion of system devices to unkludge low-level consoles and remote gdb ports and provides the mechanics necessary to support the keyboard on sparc64 (which is UART based). o The notion of a kernel interface so that a UART can be tied to something other than the well-known TTY interface. This is needed on sparc64 to present the user with a device and ioctl handling suitable for a keyboard, but also allows us to cleanly hide an UART when used as a debug port. Following is a list of features and bugs/flaws specific to the ns8250 family of UARTs as compared to their support in sio(4): o The uart(4) driver determines the FIFO size and automaticly takes advantages of larger FIFOs and/or additional features. Note that since I don't have sufficient access to 16[679]5x UARTs, hardware flow control has not been enabled. This is almost trivial to do, provided one can test. The downside of this is that broken UARTs are more likely to not work correctly with uart(4). The need for tunables or knobs may be large enough to warrant their creation. o The uart(4) driver does not share the same bumpy history as sio(4) and will therefore not provide the necessary hooks, tweaks, quirks or work-arounds to deal with once common hardware. To that extend, uart(4) supports a subset of the UARTs that sio(4) supports. The question before us is whether the subset is sufficient for current hardware. o There is no support for multiport UARTs in uart(4). The decision behind this is that uart(4) deals with one EIA RS232-C interface. Packaging of multiple interfaces in a single chip or on a single expansion board is beyond the scope of uart(4) and is now mostly left for puc(4) to deal with. Lack of hardware made it impossible to actually implement such a dependency other than is present for the dual channel SAB82532 and Z8350 SCCs. The current list of missing features is: o No configuration capabilities. A set of tunables and sysctls is being worked out. There are likely not going to be any or much compile-time knobs. Such configuration does not fit well with current hardware. o No support for the PPS API. This is partly dependent on the ability to configure uart(4) and partly dependent on having sufficient information to implement it properly. As usual, the manpage is present but lacks the attention the software has gotten. 119815 Sat Sep 06 23:13:47 MDT 2003 marcel The uart(4) driver is an universal driver for various UART hardware. It improves on sio(4) in the following areas: o Fully newbusified to allow for memory mapped I/O. This is a must for ia64 and sparc64, o Machine dependent code to take full advantage of machine and firm- ware specific ways to define serial consoles and/or debug ports. o Hardware abstraction layer to allow the driver to be used with various UARTs, such as the well-known ns8250 family of UARTs, the Siemens sab82532 or the Zilog Z8530. This is especially important for pc98 and sparc64 where it's common to have different UARTs, o The notion of system devices to unkludge low-level consoles and remote gdb ports and provides the mechanics necessary to support the keyboard on sparc64 (which is UART based). o The notion of a kernel interface so that a UART can be tied to something other than the well-known TTY interface. This is needed on sparc64 to present the user with a device and ioctl handling suitable for a keyboard, but also allows us to cleanly hide an UART when used as a debug port. Following is a list of features and bugs/flaws specific to the ns8250 family of UARTs as compared to their support in sio(4): o The uart(4) driver determines the FIFO size and automaticly takes advantages of larger FIFOs and/or additional features. Note that since I don't have sufficient access to 16[679]5x UARTs, hardware flow control has not been enabled. This is almost trivial to do, provided one can test. The downside of this is that broken UARTs are more likely to not work correctly with uart(4). The need for tunables or knobs may be large enough to warrant their creation. o The uart(4) driver does not share the same bumpy history as sio(4) and will therefore not provide the necessary hooks, tweaks, quirks or work-arounds to deal with once common hardware. To that extend, uart(4) supports a subset of the UARTs that sio(4) supports. The question before us is whether the subset is sufficient for current hardware. o There is no support for multiport UARTs in uart(4). The decision behind this is that uart(4) deals with one EIA RS232-C interface. Packaging of multiple interfaces in a single chip or on a single expansion board is beyond the scope of uart(4) and is now mostly left for puc(4) to deal with. Lack of hardware made it impossible to actually implement such a dependency other than is present for the dual channel SAB82532 and Z8350 SCCs. The current list of missing features is: o No configuration capabilities. A set of tunables and sysctls is being worked out. There are likely not going to be any or much compile-time knobs. Such configuration does not fit well with current hardware. o No support for the PPS API. This is partly dependent on the ability to configure uart(4) and partly dependent on having sufficient information to implement it properly. As usual, the manpage is present but lacks the attention the software has gotten. 119815 Sat Sep 06 23:13:47 MDT 2003 marcel The uart(4) driver is an universal driver for various UART hardware. It improves on sio(4) in the following areas: o Fully newbusified to allow for memory mapped I/O. This is a must for ia64 and sparc64, o Machine dependent code to take full advantage of machine and firm- ware specific ways to define serial consoles and/or debug ports. o Hardware abstraction layer to allow the driver to be used with various UARTs, such as the well-known ns8250 family of UARTs, the Siemens sab82532 or the Zilog Z8530. This is especially important for pc98 and sparc64 where it's common to have different UARTs, o The notion of system devices to unkludge low-level consoles and remote gdb ports and provides the mechanics necessary to support the keyboard on sparc64 (which is UART based). o The notion of a kernel interface so that a UART can be tied to something other than the well-known TTY interface. This is needed on sparc64 to present the user with a device and ioctl handling suitable for a keyboard, but also allows us to cleanly hide an UART when used as a debug port. Following is a list of features and bugs/flaws specific to the ns8250 family of UARTs as compared to their support in sio(4): o The uart(4) driver determines the FIFO size and automaticly takes advantages of larger FIFOs and/or additional features. Note that since I don't have sufficient access to 16[679]5x UARTs, hardware flow control has not been enabled. This is almost trivial to do, provided one can test. The downside of this is that broken UARTs are more likely to not work correctly with uart(4). The need for tunables or knobs may be large enough to warrant their creation. o The uart(4) driver does not share the same bumpy history as sio(4) and will therefore not provide the necessary hooks, tweaks, quirks or work-arounds to deal with once common hardware. To that extend, uart(4) supports a subset of the UARTs that sio(4) supports. The question before us is whether the subset is sufficient for current hardware. o There is no support for multiport UARTs in uart(4). The decision behind this is that uart(4) deals with one EIA RS232-C interface. Packaging of multiple interfaces in a single chip or on a single expansion board is beyond the scope of uart(4) and is now mostly left for puc(4) to deal with. Lack of hardware made it impossible to actually implement such a dependency other than is present for the dual channel SAB82532 and Z8350 SCCs. The current list of missing features is: o No configuration capabilities. A set of tunables and sysctls is being worked out. There are likely not going to be any or much compile-time knobs. Such configuration does not fit well with current hardware. o No support for the PPS API. This is partly dependent on the ability to configure uart(4) and partly dependent on having sufficient information to implement it properly. As usual, the manpage is present but lacks the attention the software has gotten. 119815 Sat Sep 06 23:13:47 MDT 2003 marcel The uart(4) driver is an universal driver for various UART hardware. It improves on sio(4) in the following areas: o Fully newbusified to allow for memory mapped I/O. This is a must for ia64 and sparc64, o Machine dependent code to take full advantage of machine and firm- ware specific ways to define serial consoles and/or debug ports. o Hardware abstraction layer to allow the driver to be used with various UARTs, such as the well-known ns8250 family of UARTs, the Siemens sab82532 or the Zilog Z8530. This is especially important for pc98 and sparc64 where it's common to have different UARTs, o The notion of system devices to unkludge low-level consoles and remote gdb ports and provides the mechanics necessary to support the keyboard on sparc64 (which is UART based). o The notion of a kernel interface so that a UART can be tied to something other than the well-known TTY interface. This is needed on sparc64 to present the user with a device and ioctl handling suitable for a keyboard, but also allows us to cleanly hide an UART when used as a debug port. Following is a list of features and bugs/flaws specific to the ns8250 family of UARTs as compared to their support in sio(4): o The uart(4) driver determines the FIFO size and automaticly takes advantages of larger FIFOs and/or additional features. Note that since I don't have sufficient access to 16[679]5x UARTs, hardware flow control has not been enabled. This is almost trivial to do, provided one can test. The downside of this is that broken UARTs are more likely to not work correctly with uart(4). The need for tunables or knobs may be large enough to warrant their creation. o The uart(4) driver does not share the same bumpy history as sio(4) and will therefore not provide the necessary hooks, tweaks, quirks or work-arounds to deal with once common hardware. To that extend, uart(4) supports a subset of the UARTs that sio(4) supports. The question before us is whether the subset is sufficient for current hardware. o There is no support for multiport UARTs in uart(4). The decision behind this is that uart(4) deals with one EIA RS232-C interface. Packaging of multiple interfaces in a single chip or on a single expansion board is beyond the scope of uart(4) and is now mostly left for puc(4) to deal with. Lack of hardware made it impossible to actually implement such a dependency other than is present for the dual channel SAB82532 and Z8350 SCCs. The current list of missing features is: o No configuration capabilities. A set of tunables and sysctls is being worked out. There are likely not going to be any or much compile-time knobs. Such configuration does not fit well with current hardware. o No support for the PPS API. This is partly dependent on the ability to configure uart(4) and partly dependent on having sufficient information to implement it properly. As usual, the manpage is present but lacks the attention the software has gotten. 119815 Sat Sep 06 23:13:47 MDT 2003 marcel The uart(4) driver is an universal driver for various UART hardware. It improves on sio(4) in the following areas: o Fully newbusified to allow for memory mapped I/O. This is a must for ia64 and sparc64, o Machine dependent code to take full advantage of machine and firm- ware specific ways to define serial consoles and/or debug ports. o Hardware abstraction layer to allow the driver to be used with various UARTs, such as the well-known ns8250 family of UARTs, the Siemens sab82532 or the Zilog Z8530. This is especially important for pc98 and sparc64 where it's common to have different UARTs, o The notion of system devices to unkludge low-level consoles and remote gdb ports and provides the mechanics necessary to support the keyboard on sparc64 (which is UART based). o The notion of a kernel interface so that a UART can be tied to something other than the well-known TTY interface. This is needed on sparc64 to present the user with a device and ioctl handling suitable for a keyboard, but also allows us to cleanly hide an UART when used as a debug port. Following is a list of features and bugs/flaws specific to the ns8250 family of UARTs as compared to their support in sio(4): o The uart(4) driver determines the FIFO size and automaticly takes advantages of larger FIFOs and/or additional features. Note that since I don't have sufficient access to 16[679]5x UARTs, hardware flow control has not been enabled. This is almost trivial to do, provided one can test. The downside of this is that broken UARTs are more likely to not work correctly with uart(4). The need for tunables or knobs may be large enough to warrant their creation. o The uart(4) driver does not share the same bumpy history as sio(4) and will therefore not provide the necessary hooks, tweaks, quirks or work-arounds to deal with once common hardware. To that extend, uart(4) supports a subset of the UARTs that sio(4) supports. The question before us is whether the subset is sufficient for current hardware. o There is no support for multiport UARTs in uart(4). The decision behind this is that uart(4) deals with one EIA RS232-C interface. Packaging of multiple interfaces in a single chip or on a single expansion board is beyond the scope of uart(4) and is now mostly left for puc(4) to deal with. Lack of hardware made it impossible to actually implement such a dependency other than is present for the dual channel SAB82532 and Z8350 SCCs. The current list of missing features is: o No configuration capabilities. A set of tunables and sysctls is being worked out. There are likely not going to be any or much compile-time knobs. Such configuration does not fit well with current hardware. o No support for the PPS API. This is partly dependent on the ability to configure uart(4) and partly dependent on having sufficient information to implement it properly. As usual, the manpage is present but lacks the attention the software has gotten. 119815 Sat Sep 06 23:13:47 MDT 2003 marcel The uart(4) driver is an universal driver for various UART hardware. It improves on sio(4) in the following areas: o Fully newbusified to allow for memory mapped I/O. This is a must for ia64 and sparc64, o Machine dependent code to take full advantage of machine and firm- ware specific ways to define serial consoles and/or debug ports. o Hardware abstraction layer to allow the driver to be used with various UARTs, such as the well-known ns8250 family of UARTs, the Siemens sab82532 or the Zilog Z8530. This is especially important for pc98 and sparc64 where it's common to have different UARTs, o The notion of system devices to unkludge low-level consoles and remote gdb ports and provides the mechanics necessary to support the keyboard on sparc64 (which is UART based). o The notion of a kernel interface so that a UART can be tied to something other than the well-known TTY interface. This is needed on sparc64 to present the user with a device and ioctl handling suitable for a keyboard, but also allows us to cleanly hide an UART when used as a debug port. Following is a list of features and bugs/flaws specific to the ns8250 family of UARTs as compared to their support in sio(4): o The uart(4) driver determines the FIFO size and automaticly takes advantages of larger FIFOs and/or additional features. Note that since I don't have sufficient access to 16[679]5x UARTs, hardware flow control has not been enabled. This is almost trivial to do, provided one can test. The downside of this is that broken UARTs are more likely to not work correctly with uart(4). The need for tunables or knobs may be large enough to warrant their creation. o The uart(4) driver does not share the same bumpy history as sio(4) and will therefore not provide the necessary hooks, tweaks, quirks or work-arounds to deal with once common hardware. To that extend, uart(4) supports a subset of the UARTs that sio(4) supports. The question before us is whether the subset is sufficient for current hardware. o There is no support for multiport UARTs in uart(4). The decision behind this is that uart(4) deals with one EIA RS232-C interface. Packaging of multiple interfaces in a single chip or on a single expansion board is beyond the scope of uart(4) and is now mostly left for puc(4) to deal with. Lack of hardware made it impossible to actually implement such a dependency other than is present for the dual channel SAB82532 and Z8350 SCCs. The current list of missing features is: o No configuration capabilities. A set of tunables and sysctls is being worked out. There are likely not going to be any or much compile-time knobs. Such configuration does not fit well with current hardware. o No support for the PPS API. This is partly dependent on the ability to configure uart(4) and partly dependent on having sufficient information to implement it properly. As usual, the manpage is present but lacks the attention the software has gotten. 119815 Sat Sep 06 23:13:47 MDT 2003 marcel The uart(4) driver is an universal driver for various UART hardware. It improves on sio(4) in the following areas: o Fully newbusified to allow for memory mapped I/O. This is a must for ia64 and sparc64, o Machine dependent code to take full advantage of machine and firm- ware specific ways to define serial consoles and/or debug ports. o Hardware abstraction layer to allow the driver to be used with various UARTs, such as the well-known ns8250 family of UARTs, the Siemens sab82532 or the Zilog Z8530. This is especially important for pc98 and sparc64 where it's common to have different UARTs, o The notion of system devices to unkludge low-level consoles and remote gdb ports and provides the mechanics necessary to support the keyboard on sparc64 (which is UART based). o The notion of a kernel interface so that a UART can be tied to something other than the well-known TTY interface. This is needed on sparc64 to present the user with a device and ioctl handling suitable for a keyboard, but also allows us to cleanly hide an UART when used as a debug port. Following is a list of features and bugs/flaws specific to the ns8250 family of UARTs as compared to their support in sio(4): o The uart(4) driver determines the FIFO size and automaticly takes advantages of larger FIFOs and/or additional features. Note that since I don't have sufficient access to 16[679]5x UARTs, hardware flow control has not been enabled. This is almost trivial to do, provided one can test. The downside of this is that broken UARTs are more likely to not work correctly with uart(4). The need for tunables or knobs may be large enough to warrant their creation. o The uart(4) driver does not share the same bumpy history as sio(4) and will therefore not provide the necessary hooks, tweaks, quirks or work-arounds to deal with once common hardware. To that extend, uart(4) supports a subset of the UARTs that sio(4) supports. The question before us is whether the subset is sufficient for current hardware. o There is no support for multiport UARTs in uart(4). The decision behind this is that uart(4) deals with one EIA RS232-C interface. Packaging of multiple interfaces in a single chip or on a single expansion board is beyond the scope of uart(4) and is now mostly left for puc(4) to deal with. Lack of hardware made it impossible to actually implement such a dependency other than is present for the dual channel SAB82532 and Z8350 SCCs. The current list of missing features is: o No configuration capabilities. A set of tunables and sysctls is being worked out. There are likely not going to be any or much compile-time knobs. Such configuration does not fit well with current hardware. o No support for the PPS API. This is partly dependent on the ability to configure uart(4) and partly dependent on having sufficient information to implement it properly. As usual, the manpage is present but lacks the attention the software has gotten. 119815 Sat Sep 06 23:13:47 MDT 2003 marcel The uart(4) driver is an universal driver for various UART hardware. It improves on sio(4) in the following areas: o Fully newbusified to allow for memory mapped I/O. This is a must for ia64 and sparc64, o Machine dependent code to take full advantage of machine and firm- ware specific ways to define serial consoles and/or debug ports. o Hardware abstraction layer to allow the driver to be used with various UARTs, such as the well-known ns8250 family of UARTs, the Siemens sab82532 or the Zilog Z8530. This is especially important for pc98 and sparc64 where it's common to have different UARTs, o The notion of system devices to unkludge low-level consoles and remote gdb ports and provides the mechanics necessary to support the keyboard on sparc64 (which is UART based). o The notion of a kernel interface so that a UART can be tied to something other than the well-known TTY interface. This is needed on sparc64 to present the user with a device and ioctl handling suitable for a keyboard, but also allows us to cleanly hide an UART when used as a debug port. Following is a list of features and bugs/flaws specific to the ns8250 family of UARTs as compared to their support in sio(4): o The uart(4) driver determines the FIFO size and automaticly takes advantages of larger FIFOs and/or additional features. Note that since I don't have sufficient access to 16[679]5x UARTs, hardware flow control has not been enabled. This is almost trivial to do, provided one can test. The downside of this is that broken UARTs are more likely to not work correctly with uart(4). The need for tunables or knobs may be large enough to warrant their creation. o The uart(4) driver does not share the same bumpy history as sio(4) and will therefore not provide the necessary hooks, tweaks, quirks or work-arounds to deal with once common hardware. To that extend, uart(4) supports a subset of the UARTs that sio(4) supports. The question before us is whether the subset is sufficient for current hardware. o There is no support for multiport UARTs in uart(4). The decision behind this is that uart(4) deals with one EIA RS232-C interface. Packaging of multiple interfaces in a single chip or on a single expansion board is beyond the scope of uart(4) and is now mostly left for puc(4) to deal with. Lack of hardware made it impossible to actually implement such a dependency other than is present for the dual channel SAB82532 and Z8350 SCCs. The current list of missing features is: o No configuration capabilities. A set of tunables and sysctls is being worked out. There are likely not going to be any or much compile-time knobs. Such configuration does not fit well with current hardware. o No support for the PPS API. This is partly dependent on the ability to configure uart(4) and partly dependent on having sufficient information to implement it properly. As usual, the manpage is present but lacks the attention the software has gotten. 119815 Sat Sep 06 23:13:47 MDT 2003 marcel The uart(4) driver is an universal driver for various UART hardware. It improves on sio(4) in the following areas: o Fully newbusified to allow for memory mapped I/O. This is a must for ia64 and sparc64, o Machine dependent code to take full advantage of machine and firm- ware specific ways to define serial consoles and/or debug ports. o Hardware abstraction layer to allow the driver to be used with various UARTs, such as the well-known ns8250 family of UARTs, the Siemens sab82532 or the Zilog Z8530. This is especially important for pc98 and sparc64 where it's common to have different UARTs, o The notion of system devices to unkludge low-level consoles and remote gdb ports and provides the mechanics necessary to support the keyboard on sparc64 (which is UART based). o The notion of a kernel interface so that a UART can be tied to something other than the well-known TTY interface. This is needed on sparc64 to present the user with a device and ioctl handling suitable for a keyboard, but also allows us to cleanly hide an UART when used as a debug port. Following is a list of features and bugs/flaws specific to the ns8250 family of UARTs as compared to their support in sio(4): o The uart(4) driver determines the FIFO size and automaticly takes advantages of larger FIFOs and/or additional features. Note that since I don't have sufficient access to 16[679]5x UARTs, hardware flow control has not been enabled. This is almost trivial to do, provided one can test. The downside of this is that broken UARTs are more likely to not work correctly with uart(4). The need for tunables or knobs may be large enough to warrant their creation. o The uart(4) driver does not share the same bumpy history as sio(4) and will therefore not provide the necessary hooks, tweaks, quirks or work-arounds to deal with once common hardware. To that extend, uart(4) supports a subset of the UARTs that sio(4) supports. The question before us is whether the subset is sufficient for current hardware. o There is no support for multiport UARTs in uart(4). The decision behind this is that uart(4) deals with one EIA RS232-C interface. Packaging of multiple interfaces in a single chip or on a single expansion board is beyond the scope of uart(4) and is now mostly left for puc(4) to deal with. Lack of hardware made it impossible to actually implement such a dependency other than is present for the dual channel SAB82532 and Z8350 SCCs. The current list of missing features is: o No configuration capabilities. A set of tunables and sysctls is being worked out. There are likely not going to be any or much compile-time knobs. Such configuration does not fit well with current hardware. o No support for the PPS API. This is partly dependent on the ability to configure uart(4) and partly dependent on having sufficient information to implement it properly. As usual, the manpage is present but lacks the attention the software has gotten. 119815 Sat Sep 06 23:13:47 MDT 2003 marcel The uart(4) driver is an universal driver for various UART hardware. It improves on sio(4) in the following areas: o Fully newbusified to allow for memory mapped I/O. This is a must for ia64 and sparc64, o Machine dependent code to take full advantage of machine and firm- ware specific ways to define serial consoles and/or debug ports. o Hardware abstraction layer to allow the driver to be used with various UARTs, such as the well-known ns8250 family of UARTs, the Siemens sab82532 or the Zilog Z8530. This is especially important for pc98 and sparc64 where it's common to have different UARTs, o The notion of system devices to unkludge low-level consoles and remote gdb ports and provides the mechanics necessary to support the keyboard on sparc64 (which is UART based). o The notion of a kernel interface so that a UART can be tied to something other than the well-known TTY interface. This is needed on sparc64 to present the user with a device and ioctl handling suitable for a keyboard, but also allows us to cleanly hide an UART when used as a debug port. Following is a list of features and bugs/flaws specific to the ns8250 family of UARTs as compared to their support in sio(4): o The uart(4) driver determines the FIFO size and automaticly takes advantages of larger FIFOs and/or additional features. Note that since I don't have sufficient access to 16[679]5x UARTs, hardware flow control has not been enabled. This is almost trivial to do, provided one can test. The downside of this is that broken UARTs are more likely to not work correctly with uart(4). The need for tunables or knobs may be large enough to warrant their creation. o The uart(4) driver does not share the same bumpy history as sio(4) and will therefore not provide the necessary hooks, tweaks, quirks or work-arounds to deal with once common hardware. To that extend, uart(4) supports a subset of the UARTs that sio(4) supports. The question before us is whether the subset is sufficient for current hardware. o There is no support for multiport UARTs in uart(4). The decision behind this is that uart(4) deals with one EIA RS232-C interface. Packaging of multiple interfaces in a single chip or on a single expansion board is beyond the scope of uart(4) and is now mostly left for puc(4) to deal with. Lack of hardware made it impossible to actually implement such a dependency other than is present for the dual channel SAB82532 and Z8350 SCCs. The current list of missing features is: o No configuration capabilities. A set of tunables and sysctls is being worked out. There are likely not going to be any or much compile-time knobs. Such configuration does not fit well with current hardware. o No support for the PPS API. This is partly dependent on the ability to configure uart(4) and partly dependent on having sufficient information to implement it properly. As usual, the manpage is present but lacks the attention the software has gotten. 119815 Sat Sep 06 23:13:47 MDT 2003 marcel The uart(4) driver is an universal driver for various UART hardware. It improves on sio(4) in the following areas: o Fully newbusified to allow for memory mapped I/O. This is a must for ia64 and sparc64, o Machine dependent code to take full advantage of machine and firm- ware specific ways to define serial consoles and/or debug ports. o Hardware abstraction layer to allow the driver to be used with various UARTs, such as the well-known ns8250 family of UARTs, the Siemens sab82532 or the Zilog Z8530. This is especially important for pc98 and sparc64 where it's common to have different UARTs, o The notion of system devices to unkludge low-level consoles and remote gdb ports and provides the mechanics necessary to support the keyboard on sparc64 (which is UART based). o The notion of a kernel interface so that a UART can be tied to something other than the well-known TTY interface. This is needed on sparc64 to present the user with a device and ioctl handling suitable for a keyboard, but also allows us to cleanly hide an UART when used as a debug port. Following is a list of features and bugs/flaws specific to the ns8250 family of UARTs as compared to their support in sio(4): o The uart(4) driver determines the FIFO size and automaticly takes advantages of larger FIFOs and/or additional features. Note that since I don't have sufficient access to 16[679]5x UARTs, hardware flow control has not been enabled. This is almost trivial to do, provided one can test. The downside of this is that broken UARTs are more likely to not work correctly with uart(4). The need for tunables or knobs may be large enough to warrant their creation. o The uart(4) driver does not share the same bumpy history as sio(4) and will therefore not provide the necessary hooks, tweaks, quirks or work-arounds to deal with once common hardware. To that extend, uart(4) supports a subset of the UARTs that sio(4) supports. The question before us is whether the subset is sufficient for current hardware. o There is no support for multiport UARTs in uart(4). The decision behind this is that uart(4) deals with one EIA RS232-C interface. Packaging of multiple interfaces in a single chip or on a single expansion board is beyond the scope of uart(4) and is now mostly left for puc(4) to deal with. Lack of hardware made it impossible to actually implement such a dependency other than is present for the dual channel SAB82532 and Z8350 SCCs. The current list of missing features is: o No configuration capabilities. A set of tunables and sysctls is being worked out. There are likely not going to be any or much compile-time knobs. Such configuration does not fit well with current hardware. o No support for the PPS API. This is partly dependent on the ability to configure uart(4) and partly dependent on having sufficient information to implement it properly. As usual, the manpage is present but lacks the attention the software has gotten. |
| H A D | uart_if.m | diff 120143 Wed Sep 17 01:41:21 MDT 2003 marcel Add locking to the hardware drivers. I intended to figure out more precisely where locking would be needed before adding it, but it seems uart(4) draws slightly too much attention to have it without locking for too long. The lock added is a spinlock that protects access to the underlying hardware. As a first and obvious stab at this, each method of the hardware interface grabs the lock. Roughly speaking this serializes the methods. Exceptions are the probe, attach and detach methods. 119815 Sat Sep 06 23:13:47 MDT 2003 marcel The uart(4) driver is an universal driver for various UART hardware. It improves on sio(4) in the following areas: o Fully newbusified to allow for memory mapped I/O. This is a must for ia64 and sparc64, o Machine dependent code to take full advantage of machine and firm- ware specific ways to define serial consoles and/or debug ports. o Hardware abstraction layer to allow the driver to be used with various UARTs, such as the well-known ns8250 family of UARTs, the Siemens sab82532 or the Zilog Z8530. This is especially important for pc98 and sparc64 where it's common to have different UARTs, o The notion of system devices to unkludge low-level consoles and remote gdb ports and provides the mechanics necessary to support the keyboard on sparc64 (which is UART based). o The notion of a kernel interface so that a UART can be tied to something other than the well-known TTY interface. This is needed on sparc64 to present the user with a device and ioctl handling suitable for a keyboard, but also allows us to cleanly hide an UART when used as a debug port. Following is a list of features and bugs/flaws specific to the ns8250 family of UARTs as compared to their support in sio(4): o The uart(4) driver determines the FIFO size and automaticly takes advantages of larger FIFOs and/or additional features. Note that since I don't have sufficient access to 16[679]5x UARTs, hardware flow control has not been enabled. This is almost trivial to do, provided one can test. The downside of this is that broken UARTs are more likely to not work correctly with uart(4). The need for tunables or knobs may be large enough to warrant their creation. o The uart(4) driver does not share the same bumpy history as sio(4) and will therefore not provide the necessary hooks, tweaks, quirks or work-arounds to deal with once common hardware. To that extend, uart(4) supports a subset of the UARTs that sio(4) supports. The question before us is whether the subset is sufficient for current hardware. o There is no support for multiport UARTs in uart(4). The decision behind this is that uart(4) deals with one EIA RS232-C interface. Packaging of multiple interfaces in a single chip or on a single expansion board is beyond the scope of uart(4) and is now mostly left for puc(4) to deal with. Lack of hardware made it impossible to actually implement such a dependency other than is present for the dual channel SAB82532 and Z8350 SCCs. The current list of missing features is: o No configuration capabilities. A set of tunables and sysctls is being worked out. There are likely not going to be any or much compile-time knobs. Such configuration does not fit well with current hardware. o No support for the PPS API. This is partly dependent on the ability to configure uart(4) and partly dependent on having sufficient information to implement it properly. As usual, the manpage is present but lacks the attention the software has gotten. 119815 Sat Sep 06 23:13:47 MDT 2003 marcel The uart(4) driver is an universal driver for various UART hardware. It improves on sio(4) in the following areas: o Fully newbusified to allow for memory mapped I/O. This is a must for ia64 and sparc64, o Machine dependent code to take full advantage of machine and firm- ware specific ways to define serial consoles and/or debug ports. o Hardware abstraction layer to allow the driver to be used with various UARTs, such as the well-known ns8250 family of UARTs, the Siemens sab82532 or the Zilog Z8530. This is especially important for pc98 and sparc64 where it's common to have different UARTs, o The notion of system devices to unkludge low-level consoles and remote gdb ports and provides the mechanics necessary to support the keyboard on sparc64 (which is UART based). o The notion of a kernel interface so that a UART can be tied to something other than the well-known TTY interface. This is needed on sparc64 to present the user with a device and ioctl handling suitable for a keyboard, but also allows us to cleanly hide an UART when used as a debug port. Following is a list of features and bugs/flaws specific to the ns8250 family of UARTs as compared to their support in sio(4): o The uart(4) driver determines the FIFO size and automaticly takes advantages of larger FIFOs and/or additional features. Note that since I don't have sufficient access to 16[679]5x UARTs, hardware flow control has not been enabled. This is almost trivial to do, provided one can test. The downside of this is that broken UARTs are more likely to not work correctly with uart(4). The need for tunables or knobs may be large enough to warrant their creation. o The uart(4) driver does not share the same bumpy history as sio(4) and will therefore not provide the necessary hooks, tweaks, quirks or work-arounds to deal with once common hardware. To that extend, uart(4) supports a subset of the UARTs that sio(4) supports. The question before us is whether the subset is sufficient for current hardware. o There is no support for multiport UARTs in uart(4). The decision behind this is that uart(4) deals with one EIA RS232-C interface. Packaging of multiple interfaces in a single chip or on a single expansion board is beyond the scope of uart(4) and is now mostly left for puc(4) to deal with. Lack of hardware made it impossible to actually implement such a dependency other than is present for the dual channel SAB82532 and Z8350 SCCs. The current list of missing features is: o No configuration capabilities. A set of tunables and sysctls is being worked out. There are likely not going to be any or much compile-time knobs. Such configuration does not fit well with current hardware. o No support for the PPS API. This is partly dependent on the ability to configure uart(4) and partly dependent on having sufficient information to implement it properly. As usual, the manpage is present but lacks the attention the software has gotten. 119815 Sat Sep 06 23:13:47 MDT 2003 marcel The uart(4) driver is an universal driver for various UART hardware. It improves on sio(4) in the following areas: o Fully newbusified to allow for memory mapped I/O. This is a must for ia64 and sparc64, o Machine dependent code to take full advantage of machine and firm- ware specific ways to define serial consoles and/or debug ports. o Hardware abstraction layer to allow the driver to be used with various UARTs, such as the well-known ns8250 family of UARTs, the Siemens sab82532 or the Zilog Z8530. This is especially important for pc98 and sparc64 where it's common to have different UARTs, o The notion of system devices to unkludge low-level consoles and remote gdb ports and provides the mechanics necessary to support the keyboard on sparc64 (which is UART based). o The notion of a kernel interface so that a UART can be tied to something other than the well-known TTY interface. This is needed on sparc64 to present the user with a device and ioctl handling suitable for a keyboard, but also allows us to cleanly hide an UART when used as a debug port. Following is a list of features and bugs/flaws specific to the ns8250 family of UARTs as compared to their support in sio(4): o The uart(4) driver determines the FIFO size and automaticly takes advantages of larger FIFOs and/or additional features. Note that since I don't have sufficient access to 16[679]5x UARTs, hardware flow control has not been enabled. This is almost trivial to do, provided one can test. The downside of this is that broken UARTs are more likely to not work correctly with uart(4). The need for tunables or knobs may be large enough to warrant their creation. o The uart(4) driver does not share the same bumpy history as sio(4) and will therefore not provide the necessary hooks, tweaks, quirks or work-arounds to deal with once common hardware. To that extend, uart(4) supports a subset of the UARTs that sio(4) supports. The question before us is whether the subset is sufficient for current hardware. o There is no support for multiport UARTs in uart(4). The decision behind this is that uart(4) deals with one EIA RS232-C interface. Packaging of multiple interfaces in a single chip or on a single expansion board is beyond the scope of uart(4) and is now mostly left for puc(4) to deal with. Lack of hardware made it impossible to actually implement such a dependency other than is present for the dual channel SAB82532 and Z8350 SCCs. The current list of missing features is: o No configuration capabilities. A set of tunables and sysctls is being worked out. There are likely not going to be any or much compile-time knobs. Such configuration does not fit well with current hardware. o No support for the PPS API. This is partly dependent on the ability to configure uart(4) and partly dependent on having sufficient information to implement it properly. As usual, the manpage is present but lacks the attention the software has gotten. 119815 Sat Sep 06 23:13:47 MDT 2003 marcel The uart(4) driver is an universal driver for various UART hardware. It improves on sio(4) in the following areas: o Fully newbusified to allow for memory mapped I/O. This is a must for ia64 and sparc64, o Machine dependent code to take full advantage of machine and firm- ware specific ways to define serial consoles and/or debug ports. o Hardware abstraction layer to allow the driver to be used with various UARTs, such as the well-known ns8250 family of UARTs, the Siemens sab82532 or the Zilog Z8530. This is especially important for pc98 and sparc64 where it's common to have different UARTs, o The notion of system devices to unkludge low-level consoles and remote gdb ports and provides the mechanics necessary to support the keyboard on sparc64 (which is UART based). o The notion of a kernel interface so that a UART can be tied to something other than the well-known TTY interface. This is needed on sparc64 to present the user with a device and ioctl handling suitable for a keyboard, but also allows us to cleanly hide an UART when used as a debug port. Following is a list of features and bugs/flaws specific to the ns8250 family of UARTs as compared to their support in sio(4): o The uart(4) driver determines the FIFO size and automaticly takes advantages of larger FIFOs and/or additional features. Note that since I don't have sufficient access to 16[679]5x UARTs, hardware flow control has not been enabled. This is almost trivial to do, provided one can test. The downside of this is that broken UARTs are more likely to not work correctly with uart(4). The need for tunables or knobs may be large enough to warrant their creation. o The uart(4) driver does not share the same bumpy history as sio(4) and will therefore not provide the necessary hooks, tweaks, quirks or work-arounds to deal with once common hardware. To that extend, uart(4) supports a subset of the UARTs that sio(4) supports. The question before us is whether the subset is sufficient for current hardware. o There is no support for multiport UARTs in uart(4). The decision behind this is that uart(4) deals with one EIA RS232-C interface. Packaging of multiple interfaces in a single chip or on a single expansion board is beyond the scope of uart(4) and is now mostly left for puc(4) to deal with. Lack of hardware made it impossible to actually implement such a dependency other than is present for the dual channel SAB82532 and Z8350 SCCs. The current list of missing features is: o No configuration capabilities. A set of tunables and sysctls is being worked out. There are likely not going to be any or much compile-time knobs. Such configuration does not fit well with current hardware. o No support for the PPS API. This is partly dependent on the ability to configure uart(4) and partly dependent on having sufficient information to implement it properly. As usual, the manpage is present but lacks the attention the software has gotten. 119815 Sat Sep 06 23:13:47 MDT 2003 marcel The uart(4) driver is an universal driver for various UART hardware. It improves on sio(4) in the following areas: o Fully newbusified to allow for memory mapped I/O. This is a must for ia64 and sparc64, o Machine dependent code to take full advantage of machine and firm- ware specific ways to define serial consoles and/or debug ports. o Hardware abstraction layer to allow the driver to be used with various UARTs, such as the well-known ns8250 family of UARTs, the Siemens sab82532 or the Zilog Z8530. This is especially important for pc98 and sparc64 where it's common to have different UARTs, o The notion of system devices to unkludge low-level consoles and remote gdb ports and provides the mechanics necessary to support the keyboard on sparc64 (which is UART based). o The notion of a kernel interface so that a UART can be tied to something other than the well-known TTY interface. This is needed on sparc64 to present the user with a device and ioctl handling suitable for a keyboard, but also allows us to cleanly hide an UART when used as a debug port. Following is a list of features and bugs/flaws specific to the ns8250 family of UARTs as compared to their support in sio(4): o The uart(4) driver determines the FIFO size and automaticly takes advantages of larger FIFOs and/or additional features. Note that since I don't have sufficient access to 16[679]5x UARTs, hardware flow control has not been enabled. This is almost trivial to do, provided one can test. The downside of this is that broken UARTs are more likely to not work correctly with uart(4). The need for tunables or knobs may be large enough to warrant their creation. o The uart(4) driver does not share the same bumpy history as sio(4) and will therefore not provide the necessary hooks, tweaks, quirks or work-arounds to deal with once common hardware. To that extend, uart(4) supports a subset of the UARTs that sio(4) supports. The question before us is whether the subset is sufficient for current hardware. o There is no support for multiport UARTs in uart(4). The decision behind this is that uart(4) deals with one EIA RS232-C interface. Packaging of multiple interfaces in a single chip or on a single expansion board is beyond the scope of uart(4) and is now mostly left for puc(4) to deal with. Lack of hardware made it impossible to actually implement such a dependency other than is present for the dual channel SAB82532 and Z8350 SCCs. The current list of missing features is: o No configuration capabilities. A set of tunables and sysctls is being worked out. There are likely not going to be any or much compile-time knobs. Such configuration does not fit well with current hardware. o No support for the PPS API. This is partly dependent on the ability to configure uart(4) and partly dependent on having sufficient information to implement it properly. As usual, the manpage is present but lacks the attention the software has gotten. 119815 Sat Sep 06 23:13:47 MDT 2003 marcel The uart(4) driver is an universal driver for various UART hardware. It improves on sio(4) in the following areas: o Fully newbusified to allow for memory mapped I/O. This is a must for ia64 and sparc64, o Machine dependent code to take full advantage of machine and firm- ware specific ways to define serial consoles and/or debug ports. o Hardware abstraction layer to allow the driver to be used with various UARTs, such as the well-known ns8250 family of UARTs, the Siemens sab82532 or the Zilog Z8530. This is especially important for pc98 and sparc64 where it's common to have different UARTs, o The notion of system devices to unkludge low-level consoles and remote gdb ports and provides the mechanics necessary to support the keyboard on sparc64 (which is UART based). o The notion of a kernel interface so that a UART can be tied to something other than the well-known TTY interface. This is needed on sparc64 to present the user with a device and ioctl handling suitable for a keyboard, but also allows us to cleanly hide an UART when used as a debug port. Following is a list of features and bugs/flaws specific to the ns8250 family of UARTs as compared to their support in sio(4): o The uart(4) driver determines the FIFO size and automaticly takes advantages of larger FIFOs and/or additional features. Note that since I don't have sufficient access to 16[679]5x UARTs, hardware flow control has not been enabled. This is almost trivial to do, provided one can test. The downside of this is that broken UARTs are more likely to not work correctly with uart(4). The need for tunables or knobs may be large enough to warrant their creation. o The uart(4) driver does not share the same bumpy history as sio(4) and will therefore not provide the necessary hooks, tweaks, quirks or work-arounds to deal with once common hardware. To that extend, uart(4) supports a subset of the UARTs that sio(4) supports. The question before us is whether the subset is sufficient for current hardware. o There is no support for multiport UARTs in uart(4). The decision behind this is that uart(4) deals with one EIA RS232-C interface. Packaging of multiple interfaces in a single chip or on a single expansion board is beyond the scope of uart(4) and is now mostly left for puc(4) to deal with. Lack of hardware made it impossible to actually implement such a dependency other than is present for the dual channel SAB82532 and Z8350 SCCs. The current list of missing features is: o No configuration capabilities. A set of tunables and sysctls is being worked out. There are likely not going to be any or much compile-time knobs. Such configuration does not fit well with current hardware. o No support for the PPS API. This is partly dependent on the ability to configure uart(4) and partly dependent on having sufficient information to implement it properly. As usual, the manpage is present but lacks the attention the software has gotten. 119815 Sat Sep 06 23:13:47 MDT 2003 marcel The uart(4) driver is an universal driver for various UART hardware. It improves on sio(4) in the following areas: o Fully newbusified to allow for memory mapped I/O. This is a must for ia64 and sparc64, o Machine dependent code to take full advantage of machine and firm- ware specific ways to define serial consoles and/or debug ports. o Hardware abstraction layer to allow the driver to be used with various UARTs, such as the well-known ns8250 family of UARTs, the Siemens sab82532 or the Zilog Z8530. This is especially important for pc98 and sparc64 where it's common to have different UARTs, o The notion of system devices to unkludge low-level consoles and remote gdb ports and provides the mechanics necessary to support the keyboard on sparc64 (which is UART based). o The notion of a kernel interface so that a UART can be tied to something other than the well-known TTY interface. This is needed on sparc64 to present the user with a device and ioctl handling suitable for a keyboard, but also allows us to cleanly hide an UART when used as a debug port. Following is a list of features and bugs/flaws specific to the ns8250 family of UARTs as compared to their support in sio(4): o The uart(4) driver determines the FIFO size and automaticly takes advantages of larger FIFOs and/or additional features. Note that since I don't have sufficient access to 16[679]5x UARTs, hardware flow control has not been enabled. This is almost trivial to do, provided one can test. The downside of this is that broken UARTs are more likely to not work correctly with uart(4). The need for tunables or knobs may be large enough to warrant their creation. o The uart(4) driver does not share the same bumpy history as sio(4) and will therefore not provide the necessary hooks, tweaks, quirks or work-arounds to deal with once common hardware. To that extend, uart(4) supports a subset of the UARTs that sio(4) supports. The question before us is whether the subset is sufficient for current hardware. o There is no support for multiport UARTs in uart(4). The decision behind this is that uart(4) deals with one EIA RS232-C interface. Packaging of multiple interfaces in a single chip or on a single expansion board is beyond the scope of uart(4) and is now mostly left for puc(4) to deal with. Lack of hardware made it impossible to actually implement such a dependency other than is present for the dual channel SAB82532 and Z8350 SCCs. The current list of missing features is: o No configuration capabilities. A set of tunables and sysctls is being worked out. There are likely not going to be any or much compile-time knobs. Such configuration does not fit well with current hardware. o No support for the PPS API. This is partly dependent on the ability to configure uart(4) and partly dependent on having sufficient information to implement it properly. As usual, the manpage is present but lacks the attention the software has gotten. 119815 Sat Sep 06 23:13:47 MDT 2003 marcel The uart(4) driver is an universal driver for various UART hardware. It improves on sio(4) in the following areas: o Fully newbusified to allow for memory mapped I/O. This is a must for ia64 and sparc64, o Machine dependent code to take full advantage of machine and firm- ware specific ways to define serial consoles and/or debug ports. o Hardware abstraction layer to allow the driver to be used with various UARTs, such as the well-known ns8250 family of UARTs, the Siemens sab82532 or the Zilog Z8530. This is especially important for pc98 and sparc64 where it's common to have different UARTs, o The notion of system devices to unkludge low-level consoles and remote gdb ports and provides the mechanics necessary to support the keyboard on sparc64 (which is UART based). o The notion of a kernel interface so that a UART can be tied to something other than the well-known TTY interface. This is needed on sparc64 to present the user with a device and ioctl handling suitable for a keyboard, but also allows us to cleanly hide an UART when used as a debug port. Following is a list of features and bugs/flaws specific to the ns8250 family of UARTs as compared to their support in sio(4): o The uart(4) driver determines the FIFO size and automaticly takes advantages of larger FIFOs and/or additional features. Note that since I don't have sufficient access to 16[679]5x UARTs, hardware flow control has not been enabled. This is almost trivial to do, provided one can test. The downside of this is that broken UARTs are more likely to not work correctly with uart(4). The need for tunables or knobs may be large enough to warrant their creation. o The uart(4) driver does not share the same bumpy history as sio(4) and will therefore not provide the necessary hooks, tweaks, quirks or work-arounds to deal with once common hardware. To that extend, uart(4) supports a subset of the UARTs that sio(4) supports. The question before us is whether the subset is sufficient for current hardware. o There is no support for multiport UARTs in uart(4). The decision behind this is that uart(4) deals with one EIA RS232-C interface. Packaging of multiple interfaces in a single chip or on a single expansion board is beyond the scope of uart(4) and is now mostly left for puc(4) to deal with. Lack of hardware made it impossible to actually implement such a dependency other than is present for the dual channel SAB82532 and Z8350 SCCs. The current list of missing features is: o No configuration capabilities. A set of tunables and sysctls is being worked out. There are likely not going to be any or much compile-time knobs. Such configuration does not fit well with current hardware. o No support for the PPS API. This is partly dependent on the ability to configure uart(4) and partly dependent on having sufficient information to implement it properly. As usual, the manpage is present but lacks the attention the software has gotten. 119815 Sat Sep 06 23:13:47 MDT 2003 marcel The uart(4) driver is an universal driver for various UART hardware. It improves on sio(4) in the following areas: o Fully newbusified to allow for memory mapped I/O. This is a must for ia64 and sparc64, o Machine dependent code to take full advantage of machine and firm- ware specific ways to define serial consoles and/or debug ports. o Hardware abstraction layer to allow the driver to be used with various UARTs, such as the well-known ns8250 family of UARTs, the Siemens sab82532 or the Zilog Z8530. This is especially important for pc98 and sparc64 where it's common to have different UARTs, o The notion of system devices to unkludge low-level consoles and remote gdb ports and provides the mechanics necessary to support the keyboard on sparc64 (which is UART based). o The notion of a kernel interface so that a UART can be tied to something other than the well-known TTY interface. This is needed on sparc64 to present the user with a device and ioctl handling suitable for a keyboard, but also allows us to cleanly hide an UART when used as a debug port. Following is a list of features and bugs/flaws specific to the ns8250 family of UARTs as compared to their support in sio(4): o The uart(4) driver determines the FIFO size and automaticly takes advantages of larger FIFOs and/or additional features. Note that since I don't have sufficient access to 16[679]5x UARTs, hardware flow control has not been enabled. This is almost trivial to do, provided one can test. The downside of this is that broken UARTs are more likely to not work correctly with uart(4). The need for tunables or knobs may be large enough to warrant their creation. o The uart(4) driver does not share the same bumpy history as sio(4) and will therefore not provide the necessary hooks, tweaks, quirks or work-arounds to deal with once common hardware. To that extend, uart(4) supports a subset of the UARTs that sio(4) supports. The question before us is whether the subset is sufficient for current hardware. o There is no support for multiport UARTs in uart(4). The decision behind this is that uart(4) deals with one EIA RS232-C interface. Packaging of multiple interfaces in a single chip or on a single expansion board is beyond the scope of uart(4) and is now mostly left for puc(4) to deal with. Lack of hardware made it impossible to actually implement such a dependency other than is present for the dual channel SAB82532 and Z8350 SCCs. The current list of missing features is: o No configuration capabilities. A set of tunables and sysctls is being worked out. There are likely not going to be any or much compile-time knobs. Such configuration does not fit well with current hardware. o No support for the PPS API. This is partly dependent on the ability to configure uart(4) and partly dependent on having sufficient information to implement it properly. As usual, the manpage is present but lacks the attention the software has gotten. 119815 Sat Sep 06 23:13:47 MDT 2003 marcel The uart(4) driver is an universal driver for various UART hardware. It improves on sio(4) in the following areas: o Fully newbusified to allow for memory mapped I/O. This is a must for ia64 and sparc64, o Machine dependent code to take full advantage of machine and firm- ware specific ways to define serial consoles and/or debug ports. o Hardware abstraction layer to allow the driver to be used with various UARTs, such as the well-known ns8250 family of UARTs, the Siemens sab82532 or the Zilog Z8530. This is especially important for pc98 and sparc64 where it's common to have different UARTs, o The notion of system devices to unkludge low-level consoles and remote gdb ports and provides the mechanics necessary to support the keyboard on sparc64 (which is UART based). o The notion of a kernel interface so that a UART can be tied to something other than the well-known TTY interface. This is needed on sparc64 to present the user with a device and ioctl handling suitable for a keyboard, but also allows us to cleanly hide an UART when used as a debug port. Following is a list of features and bugs/flaws specific to the ns8250 family of UARTs as compared to their support in sio(4): o The uart(4) driver determines the FIFO size and automaticly takes advantages of larger FIFOs and/or additional features. Note that since I don't have sufficient access to 16[679]5x UARTs, hardware flow control has not been enabled. This is almost trivial to do, provided one can test. The downside of this is that broken UARTs are more likely to not work correctly with uart(4). The need for tunables or knobs may be large enough to warrant their creation. o The uart(4) driver does not share the same bumpy history as sio(4) and will therefore not provide the necessary hooks, tweaks, quirks or work-arounds to deal with once common hardware. To that extend, uart(4) supports a subset of the UARTs that sio(4) supports. The question before us is whether the subset is sufficient for current hardware. o There is no support for multiport UARTs in uart(4). The decision behind this is that uart(4) deals with one EIA RS232-C interface. Packaging of multiple interfaces in a single chip or on a single expansion board is beyond the scope of uart(4) and is now mostly left for puc(4) to deal with. Lack of hardware made it impossible to actually implement such a dependency other than is present for the dual channel SAB82532 and Z8350 SCCs. The current list of missing features is: o No configuration capabilities. A set of tunables and sysctls is being worked out. There are likely not going to be any or much compile-time knobs. Such configuration does not fit well with current hardware. o No support for the PPS API. This is partly dependent on the ability to configure uart(4) and partly dependent on having sufficient information to implement it properly. As usual, the manpage is present but lacks the attention the software has gotten. 119815 Sat Sep 06 23:13:47 MDT 2003 marcel The uart(4) driver is an universal driver for various UART hardware. It improves on sio(4) in the following areas: o Fully newbusified to allow for memory mapped I/O. This is a must for ia64 and sparc64, o Machine dependent code to take full advantage of machine and firm- ware specific ways to define serial consoles and/or debug ports. o Hardware abstraction layer to allow the driver to be used with various UARTs, such as the well-known ns8250 family of UARTs, the Siemens sab82532 or the Zilog Z8530. This is especially important for pc98 and sparc64 where it's common to have different UARTs, o The notion of system devices to unkludge low-level consoles and remote gdb ports and provides the mechanics necessary to support the keyboard on sparc64 (which is UART based). o The notion of a kernel interface so that a UART can be tied to something other than the well-known TTY interface. This is needed on sparc64 to present the user with a device and ioctl handling suitable for a keyboard, but also allows us to cleanly hide an UART when used as a debug port. Following is a list of features and bugs/flaws specific to the ns8250 family of UARTs as compared to their support in sio(4): o The uart(4) driver determines the FIFO size and automaticly takes advantages of larger FIFOs and/or additional features. Note that since I don't have sufficient access to 16[679]5x UARTs, hardware flow control has not been enabled. This is almost trivial to do, provided one can test. The downside of this is that broken UARTs are more likely to not work correctly with uart(4). The need for tunables or knobs may be large enough to warrant their creation. o The uart(4) driver does not share the same bumpy history as sio(4) and will therefore not provide the necessary hooks, tweaks, quirks or work-arounds to deal with once common hardware. To that extend, uart(4) supports a subset of the UARTs that sio(4) supports. The question before us is whether the subset is sufficient for current hardware. o There is no support for multiport UARTs in uart(4). The decision behind this is that uart(4) deals with one EIA RS232-C interface. Packaging of multiple interfaces in a single chip or on a single expansion board is beyond the scope of uart(4) and is now mostly left for puc(4) to deal with. Lack of hardware made it impossible to actually implement such a dependency other than is present for the dual channel SAB82532 and Z8350 SCCs. The current list of missing features is: o No configuration capabilities. A set of tunables and sysctls is being worked out. There are likely not going to be any or much compile-time knobs. Such configuration does not fit well with current hardware. o No support for the PPS API. This is partly dependent on the ability to configure uart(4) and partly dependent on having sufficient information to implement it properly. As usual, the manpage is present but lacks the attention the software has gotten. 119815 Sat Sep 06 23:13:47 MDT 2003 marcel The uart(4) driver is an universal driver for various UART hardware. It improves on sio(4) in the following areas: o Fully newbusified to allow for memory mapped I/O. This is a must for ia64 and sparc64, o Machine dependent code to take full advantage of machine and firm- ware specific ways to define serial consoles and/or debug ports. o Hardware abstraction layer to allow the driver to be used with various UARTs, such as the well-known ns8250 family of UARTs, the Siemens sab82532 or the Zilog Z8530. This is especially important for pc98 and sparc64 where it's common to have different UARTs, o The notion of system devices to unkludge low-level consoles and remote gdb ports and provides the mechanics necessary to support the keyboard on sparc64 (which is UART based). o The notion of a kernel interface so that a UART can be tied to something other than the well-known TTY interface. This is needed on sparc64 to present the user with a device and ioctl handling suitable for a keyboard, but also allows us to cleanly hide an UART when used as a debug port. Following is a list of features and bugs/flaws specific to the ns8250 family of UARTs as compared to their support in sio(4): o The uart(4) driver determines the FIFO size and automaticly takes advantages of larger FIFOs and/or additional features. Note that since I don't have sufficient access to 16[679]5x UARTs, hardware flow control has not been enabled. This is almost trivial to do, provided one can test. The downside of this is that broken UARTs are more likely to not work correctly with uart(4). The need for tunables or knobs may be large enough to warrant their creation. o The uart(4) driver does not share the same bumpy history as sio(4) and will therefore not provide the necessary hooks, tweaks, quirks or work-arounds to deal with once common hardware. To that extend, uart(4) supports a subset of the UARTs that sio(4) supports. The question before us is whether the subset is sufficient for current hardware. o There is no support for multiport UARTs in uart(4). The decision behind this is that uart(4) deals with one EIA RS232-C interface. Packaging of multiple interfaces in a single chip or on a single expansion board is beyond the scope of uart(4) and is now mostly left for puc(4) to deal with. Lack of hardware made it impossible to actually implement such a dependency other than is present for the dual channel SAB82532 and Z8350 SCCs. The current list of missing features is: o No configuration capabilities. A set of tunables and sysctls is being worked out. There are likely not going to be any or much compile-time knobs. Such configuration does not fit well with current hardware. o No support for the PPS API. This is partly dependent on the ability to configure uart(4) and partly dependent on having sufficient information to implement it properly. As usual, the manpage is present but lacks the attention the software has gotten. 119815 Sat Sep 06 23:13:47 MDT 2003 marcel The uart(4) driver is an universal driver for various UART hardware. It improves on sio(4) in the following areas: o Fully newbusified to allow for memory mapped I/O. This is a must for ia64 and sparc64, o Machine dependent code to take full advantage of machine and firm- ware specific ways to define serial consoles and/or debug ports. o Hardware abstraction layer to allow the driver to be used with various UARTs, such as the well-known ns8250 family of UARTs, the Siemens sab82532 or the Zilog Z8530. This is especially important for pc98 and sparc64 where it's common to have different UARTs, o The notion of system devices to unkludge low-level consoles and remote gdb ports and provides the mechanics necessary to support the keyboard on sparc64 (which is UART based). o The notion of a kernel interface so that a UART can be tied to something other than the well-known TTY interface. This is needed on sparc64 to present the user with a device and ioctl handling suitable for a keyboard, but also allows us to cleanly hide an UART when used as a debug port. Following is a list of features and bugs/flaws specific to the ns8250 family of UARTs as compared to their support in sio(4): o The uart(4) driver determines the FIFO size and automaticly takes advantages of larger FIFOs and/or additional features. Note that since I don't have sufficient access to 16[679]5x UARTs, hardware flow control has not been enabled. This is almost trivial to do, provided one can test. The downside of this is that broken UARTs are more likely to not work correctly with uart(4). The need for tunables or knobs may be large enough to warrant their creation. o The uart(4) driver does not share the same bumpy history as sio(4) and will therefore not provide the necessary hooks, tweaks, quirks or work-arounds to deal with once common hardware. To that extend, uart(4) supports a subset of the UARTs that sio(4) supports. The question before us is whether the subset is sufficient for current hardware. o There is no support for multiport UARTs in uart(4). The decision behind this is that uart(4) deals with one EIA RS232-C interface. Packaging of multiple interfaces in a single chip or on a single expansion board is beyond the scope of uart(4) and is now mostly left for puc(4) to deal with. Lack of hardware made it impossible to actually implement such a dependency other than is present for the dual channel SAB82532 and Z8350 SCCs. The current list of missing features is: o No configuration capabilities. A set of tunables and sysctls is being worked out. There are likely not going to be any or much compile-time knobs. Such configuration does not fit well with current hardware. o No support for the PPS API. This is partly dependent on the ability to configure uart(4) and partly dependent on having sufficient information to implement it properly. As usual, the manpage is present but lacks the attention the software has gotten. 119815 Sat Sep 06 23:13:47 MDT 2003 marcel The uart(4) driver is an universal driver for various UART hardware. It improves on sio(4) in the following areas: o Fully newbusified to allow for memory mapped I/O. This is a must for ia64 and sparc64, o Machine dependent code to take full advantage of machine and firm- ware specific ways to define serial consoles and/or debug ports. o Hardware abstraction layer to allow the driver to be used with various UARTs, such as the well-known ns8250 family of UARTs, the Siemens sab82532 or the Zilog Z8530. This is especially important for pc98 and sparc64 where it's common to have different UARTs, o The notion of system devices to unkludge low-level consoles and remote gdb ports and provides the mechanics necessary to support the keyboard on sparc64 (which is UART based). o The notion of a kernel interface so that a UART can be tied to something other than the well-known TTY interface. This is needed on sparc64 to present the user with a device and ioctl handling suitable for a keyboard, but also allows us to cleanly hide an UART when used as a debug port. Following is a list of features and bugs/flaws specific to the ns8250 family of UARTs as compared to their support in sio(4): o The uart(4) driver determines the FIFO size and automaticly takes advantages of larger FIFOs and/or additional features. Note that since I don't have sufficient access to 16[679]5x UARTs, hardware flow control has not been enabled. This is almost trivial to do, provided one can test. The downside of this is that broken UARTs are more likely to not work correctly with uart(4). The need for tunables or knobs may be large enough to warrant their creation. o The uart(4) driver does not share the same bumpy history as sio(4) and will therefore not provide the necessary hooks, tweaks, quirks or work-arounds to deal with once common hardware. To that extend, uart(4) supports a subset of the UARTs that sio(4) supports. The question before us is whether the subset is sufficient for current hardware. o There is no support for multiport UARTs in uart(4). The decision behind this is that uart(4) deals with one EIA RS232-C interface. Packaging of multiple interfaces in a single chip or on a single expansion board is beyond the scope of uart(4) and is now mostly left for puc(4) to deal with. Lack of hardware made it impossible to actually implement such a dependency other than is present for the dual channel SAB82532 and Z8350 SCCs. The current list of missing features is: o No configuration capabilities. A set of tunables and sysctls is being worked out. There are likely not going to be any or much compile-time knobs. Such configuration does not fit well with current hardware. o No support for the PPS API. This is partly dependent on the ability to configure uart(4) and partly dependent on having sufficient information to implement it properly. As usual, the manpage is present but lacks the attention the software has gotten. |
| /freebsd-10.2-release/sys/arm/broadcom/bcm2835/ | ||
| H A D | bcm2835_gpio.c | diff 266105 Thu May 15 01:44:32 MDT 2014 loos MFC r258046, r258047, r258050, r259035, r259036, r259037, r261842, r261843, r261844, r261845, r261846, r262194, r262522, r262559 r258046: Fix a typo on a comment in ofw_bus_if.m, the default method will return -1 when a node doesn't exist. r258047: Move the KASSERT() check to the point before the increase of number of pins. r258050: Fix gpiobus to return BUS_PROBE_GENERIC insted of BUS_PROBE_SPECIFIC (0) so it can be overriden by its OFW/FDT version. Give a chance for GPIO devices that implement the device_identify method to attach. r259035: Remove unnecessary includes and an unused softc variable. While here apply two minor style(9) fixes. r259036: Move the GPIOBUS_SET_PINFLAGS(..., ..., pin, GPIO_PIN_OUTPUT) to led(4) control callback function. This makes gpioled(4) works even if the pin is accidentally set to an input. r259037: Fix the pin value reading on AM335x. Because of the inverted logic it was always returning '0' for all the reads, even for the outputs. It is now known to work with gpioiic(4) and gpioled(4). r261842: Add an OFW GPIO compatible bus. This allows the use of the DTS files to describe GPIO bindings in the system. Move the GPIOBUS lock macros to gpiobusvar.h as they are now shared between the OFW and the non OFW versions of GPIO bus. Export gpiobus_print_pins() so it can also be used on the OFW GPIO bus. r261843: Add OFW support to the in tree gpio compatible devices: gpioiic(4) and gpioled(4). Tested on RPi and BBB (using the hardware I2C controller and gpioiic(4) for the I2C tests). It was also verified for regressions on RSPRO (MIPS/ar71xx) used as reference for a non OFW-based system. Update the gpioled(4) and gpioiic(4) man pages with some details and examples about the FDT/OFW support. Some compatibility details pointed out by imp@ will follow in subsequent commits. r261844: Allow the use of OFW I2C bus together with iicbb(4) on OFW-based systems. This change makes ofw_iicbus attach to iicbb(4) controllers in addition to the already supported i2c host bridges (iichb). On iicbb(4) allow the direct access of the OFW parent node by its children, so they can be directly attached to iicbb(4) node on the DTS without the need of describing the i2c bus. r261845: Allow the use of the OFW GPIO bus for ti_gpio and bcm2835_gpio. With this change the gpio children can be described as directly connected to the GPIO controller without the need of describing the OFW GPIO bus itself on the DTS file. With this commit the OFW GPIO bus is fully functional on BBB and RPi. GPIO controllers which want to use the OFW GPIO bus will need similar changes. r261846: Make the gpioled(4) work out of the box on BBB. Add gpioled(4) to BEAGLEBONE kernel and add the description of the four on-board leds of beaglebone-black to its DTS file. r262194: Remove an unnecessary header. r262522: Fix make depend for iicbus. r262559: Inspired by r262522, fix make depend. This fixes the build of gpio modules. diff 266105 Thu May 15 01:44:32 MDT 2014 loos MFC r258046, r258047, r258050, r259035, r259036, r259037, r261842, r261843, r261844, r261845, r261846, r262194, r262522, r262559 r258046: Fix a typo on a comment in ofw_bus_if.m, the default method will return -1 when a node doesn't exist. r258047: Move the KASSERT() check to the point before the increase of number of pins. r258050: Fix gpiobus to return BUS_PROBE_GENERIC insted of BUS_PROBE_SPECIFIC (0) so it can be overriden by its OFW/FDT version. Give a chance for GPIO devices that implement the device_identify method to attach. r259035: Remove unnecessary includes and an unused softc variable. While here apply two minor style(9) fixes. r259036: Move the GPIOBUS_SET_PINFLAGS(..., ..., pin, GPIO_PIN_OUTPUT) to led(4) control callback function. This makes gpioled(4) works even if the pin is accidentally set to an input. r259037: Fix the pin value reading on AM335x. Because of the inverted logic it was always returning '0' for all the reads, even for the outputs. It is now known to work with gpioiic(4) and gpioled(4). r261842: Add an OFW GPIO compatible bus. This allows the use of the DTS files to describe GPIO bindings in the system. Move the GPIOBUS lock macros to gpiobusvar.h as they are now shared between the OFW and the non OFW versions of GPIO bus. Export gpiobus_print_pins() so it can also be used on the OFW GPIO bus. r261843: Add OFW support to the in tree gpio compatible devices: gpioiic(4) and gpioled(4). Tested on RPi and BBB (using the hardware I2C controller and gpioiic(4) for the I2C tests). It was also verified for regressions on RSPRO (MIPS/ar71xx) used as reference for a non OFW-based system. Update the gpioled(4) and gpioiic(4) man pages with some details and examples about the FDT/OFW support. Some compatibility details pointed out by imp@ will follow in subsequent commits. r261844: Allow the use of OFW I2C bus together with iicbb(4) on OFW-based systems. This change makes ofw_iicbus attach to iicbb(4) controllers in addition to the already supported i2c host bridges (iichb). On iicbb(4) allow the direct access of the OFW parent node by its children, so they can be directly attached to iicbb(4) node on the DTS without the need of describing the i2c bus. r261845: Allow the use of the OFW GPIO bus for ti_gpio and bcm2835_gpio. With this change the gpio children can be described as directly connected to the GPIO controller without the need of describing the OFW GPIO bus itself on the DTS file. With this commit the OFW GPIO bus is fully functional on BBB and RPi. GPIO controllers which want to use the OFW GPIO bus will need similar changes. r261846: Make the gpioled(4) work out of the box on BBB. Add gpioled(4) to BEAGLEBONE kernel and add the description of the four on-board leds of beaglebone-black to its DTS file. r262194: Remove an unnecessary header. r262522: Fix make depend for iicbus. r262559: Inspired by r262522, fix make depend. This fixes the build of gpio modules. diff 266105 Thu May 15 01:44:32 MDT 2014 loos MFC r258046, r258047, r258050, r259035, r259036, r259037, r261842, r261843, r261844, r261845, r261846, r262194, r262522, r262559 r258046: Fix a typo on a comment in ofw_bus_if.m, the default method will return -1 when a node doesn't exist. r258047: Move the KASSERT() check to the point before the increase of number of pins. r258050: Fix gpiobus to return BUS_PROBE_GENERIC insted of BUS_PROBE_SPECIFIC (0) so it can be overriden by its OFW/FDT version. Give a chance for GPIO devices that implement the device_identify method to attach. r259035: Remove unnecessary includes and an unused softc variable. While here apply two minor style(9) fixes. r259036: Move the GPIOBUS_SET_PINFLAGS(..., ..., pin, GPIO_PIN_OUTPUT) to led(4) control callback function. This makes gpioled(4) works even if the pin is accidentally set to an input. r259037: Fix the pin value reading on AM335x. Because of the inverted logic it was always returning '0' for all the reads, even for the outputs. It is now known to work with gpioiic(4) and gpioled(4). r261842: Add an OFW GPIO compatible bus. This allows the use of the DTS files to describe GPIO bindings in the system. Move the GPIOBUS lock macros to gpiobusvar.h as they are now shared between the OFW and the non OFW versions of GPIO bus. Export gpiobus_print_pins() so it can also be used on the OFW GPIO bus. r261843: Add OFW support to the in tree gpio compatible devices: gpioiic(4) and gpioled(4). Tested on RPi and BBB (using the hardware I2C controller and gpioiic(4) for the I2C tests). It was also verified for regressions on RSPRO (MIPS/ar71xx) used as reference for a non OFW-based system. Update the gpioled(4) and gpioiic(4) man pages with some details and examples about the FDT/OFW support. Some compatibility details pointed out by imp@ will follow in subsequent commits. r261844: Allow the use of OFW I2C bus together with iicbb(4) on OFW-based systems. This change makes ofw_iicbus attach to iicbb(4) controllers in addition to the already supported i2c host bridges (iichb). On iicbb(4) allow the direct access of the OFW parent node by its children, so they can be directly attached to iicbb(4) node on the DTS without the need of describing the i2c bus. r261845: Allow the use of the OFW GPIO bus for ti_gpio and bcm2835_gpio. With this change the gpio children can be described as directly connected to the GPIO controller without the need of describing the OFW GPIO bus itself on the DTS file. With this commit the OFW GPIO bus is fully functional on BBB and RPi. GPIO controllers which want to use the OFW GPIO bus will need similar changes. r261846: Make the gpioled(4) work out of the box on BBB. Add gpioled(4) to BEAGLEBONE kernel and add the description of the four on-board leds of beaglebone-black to its DTS file. r262194: Remove an unnecessary header. r262522: Fix make depend for iicbus. r262559: Inspired by r262522, fix make depend. This fixes the build of gpio modules. diff 266105 Thu May 15 01:44:32 MDT 2014 loos MFC r258046, r258047, r258050, r259035, r259036, r259037, r261842, r261843, r261844, r261845, r261846, r262194, r262522, r262559 r258046: Fix a typo on a comment in ofw_bus_if.m, the default method will return -1 when a node doesn't exist. r258047: Move the KASSERT() check to the point before the increase of number of pins. r258050: Fix gpiobus to return BUS_PROBE_GENERIC insted of BUS_PROBE_SPECIFIC (0) so it can be overriden by its OFW/FDT version. Give a chance for GPIO devices that implement the device_identify method to attach. r259035: Remove unnecessary includes and an unused softc variable. While here apply two minor style(9) fixes. r259036: Move the GPIOBUS_SET_PINFLAGS(..., ..., pin, GPIO_PIN_OUTPUT) to led(4) control callback function. This makes gpioled(4) works even if the pin is accidentally set to an input. r259037: Fix the pin value reading on AM335x. Because of the inverted logic it was always returning '0' for all the reads, even for the outputs. It is now known to work with gpioiic(4) and gpioled(4). r261842: Add an OFW GPIO compatible bus. This allows the use of the DTS files to describe GPIO bindings in the system. Move the GPIOBUS lock macros to gpiobusvar.h as they are now shared between the OFW and the non OFW versions of GPIO bus. Export gpiobus_print_pins() so it can also be used on the OFW GPIO bus. r261843: Add OFW support to the in tree gpio compatible devices: gpioiic(4) and gpioled(4). Tested on RPi and BBB (using the hardware I2C controller and gpioiic(4) for the I2C tests). It was also verified for regressions on RSPRO (MIPS/ar71xx) used as reference for a non OFW-based system. Update the gpioled(4) and gpioiic(4) man pages with some details and examples about the FDT/OFW support. Some compatibility details pointed out by imp@ will follow in subsequent commits. r261844: Allow the use of OFW I2C bus together with iicbb(4) on OFW-based systems. This change makes ofw_iicbus attach to iicbb(4) controllers in addition to the already supported i2c host bridges (iichb). On iicbb(4) allow the direct access of the OFW parent node by its children, so they can be directly attached to iicbb(4) node on the DTS without the need of describing the i2c bus. r261845: Allow the use of the OFW GPIO bus for ti_gpio and bcm2835_gpio. With this change the gpio children can be described as directly connected to the GPIO controller without the need of describing the OFW GPIO bus itself on the DTS file. With this commit the OFW GPIO bus is fully functional on BBB and RPi. GPIO controllers which want to use the OFW GPIO bus will need similar changes. r261846: Make the gpioled(4) work out of the box on BBB. Add gpioled(4) to BEAGLEBONE kernel and add the description of the four on-board leds of beaglebone-black to its DTS file. r262194: Remove an unnecessary header. r262522: Fix make depend for iicbus. r262559: Inspired by r262522, fix make depend. This fixes the build of gpio modules. diff 266105 Thu May 15 01:44:32 MDT 2014 loos MFC r258046, r258047, r258050, r259035, r259036, r259037, r261842, r261843, r261844, r261845, r261846, r262194, r262522, r262559 r258046: Fix a typo on a comment in ofw_bus_if.m, the default method will return -1 when a node doesn't exist. r258047: Move the KASSERT() check to the point before the increase of number of pins. r258050: Fix gpiobus to return BUS_PROBE_GENERIC insted of BUS_PROBE_SPECIFIC (0) so it can be overriden by its OFW/FDT version. Give a chance for GPIO devices that implement the device_identify method to attach. r259035: Remove unnecessary includes and an unused softc variable. While here apply two minor style(9) fixes. r259036: Move the GPIOBUS_SET_PINFLAGS(..., ..., pin, GPIO_PIN_OUTPUT) to led(4) control callback function. This makes gpioled(4) works even if the pin is accidentally set to an input. r259037: Fix the pin value reading on AM335x. Because of the inverted logic it was always returning '0' for all the reads, even for the outputs. It is now known to work with gpioiic(4) and gpioled(4). r261842: Add an OFW GPIO compatible bus. This allows the use of the DTS files to describe GPIO bindings in the system. Move the GPIOBUS lock macros to gpiobusvar.h as they are now shared between the OFW and the non OFW versions of GPIO bus. Export gpiobus_print_pins() so it can also be used on the OFW GPIO bus. r261843: Add OFW support to the in tree gpio compatible devices: gpioiic(4) and gpioled(4). Tested on RPi and BBB (using the hardware I2C controller and gpioiic(4) for the I2C tests). It was also verified for regressions on RSPRO (MIPS/ar71xx) used as reference for a non OFW-based system. Update the gpioled(4) and gpioiic(4) man pages with some details and examples about the FDT/OFW support. Some compatibility details pointed out by imp@ will follow in subsequent commits. r261844: Allow the use of OFW I2C bus together with iicbb(4) on OFW-based systems. This change makes ofw_iicbus attach to iicbb(4) controllers in addition to the already supported i2c host bridges (iichb). On iicbb(4) allow the direct access of the OFW parent node by its children, so they can be directly attached to iicbb(4) node on the DTS without the need of describing the i2c bus. r261845: Allow the use of the OFW GPIO bus for ti_gpio and bcm2835_gpio. With this change the gpio children can be described as directly connected to the GPIO controller without the need of describing the OFW GPIO bus itself on the DTS file. With this commit the OFW GPIO bus is fully functional on BBB and RPi. GPIO controllers which want to use the OFW GPIO bus will need similar changes. r261846: Make the gpioled(4) work out of the box on BBB. Add gpioled(4) to BEAGLEBONE kernel and add the description of the four on-board leds of beaglebone-black to its DTS file. r262194: Remove an unnecessary header. r262522: Fix make depend for iicbus. r262559: Inspired by r262522, fix make depend. This fixes the build of gpio modules. diff 266105 Thu May 15 01:44:32 MDT 2014 loos MFC r258046, r258047, r258050, r259035, r259036, r259037, r261842, r261843, r261844, r261845, r261846, r262194, r262522, r262559 r258046: Fix a typo on a comment in ofw_bus_if.m, the default method will return -1 when a node doesn't exist. r258047: Move the KASSERT() check to the point before the increase of number of pins. r258050: Fix gpiobus to return BUS_PROBE_GENERIC insted of BUS_PROBE_SPECIFIC (0) so it can be overriden by its OFW/FDT version. Give a chance for GPIO devices that implement the device_identify method to attach. r259035: Remove unnecessary includes and an unused softc variable. While here apply two minor style(9) fixes. r259036: Move the GPIOBUS_SET_PINFLAGS(..., ..., pin, GPIO_PIN_OUTPUT) to led(4) control callback function. This makes gpioled(4) works even if the pin is accidentally set to an input. r259037: Fix the pin value reading on AM335x. Because of the inverted logic it was always returning '0' for all the reads, even for the outputs. It is now known to work with gpioiic(4) and gpioled(4). r261842: Add an OFW GPIO compatible bus. This allows the use of the DTS files to describe GPIO bindings in the system. Move the GPIOBUS lock macros to gpiobusvar.h as they are now shared between the OFW and the non OFW versions of GPIO bus. Export gpiobus_print_pins() so it can also be used on the OFW GPIO bus. r261843: Add OFW support to the in tree gpio compatible devices: gpioiic(4) and gpioled(4). Tested on RPi and BBB (using the hardware I2C controller and gpioiic(4) for the I2C tests). It was also verified for regressions on RSPRO (MIPS/ar71xx) used as reference for a non OFW-based system. Update the gpioled(4) and gpioiic(4) man pages with some details and examples about the FDT/OFW support. Some compatibility details pointed out by imp@ will follow in subsequent commits. r261844: Allow the use of OFW I2C bus together with iicbb(4) on OFW-based systems. This change makes ofw_iicbus attach to iicbb(4) controllers in addition to the already supported i2c host bridges (iichb). On iicbb(4) allow the direct access of the OFW parent node by its children, so they can be directly attached to iicbb(4) node on the DTS without the need of describing the i2c bus. r261845: Allow the use of the OFW GPIO bus for ti_gpio and bcm2835_gpio. With this change the gpio children can be described as directly connected to the GPIO controller without the need of describing the OFW GPIO bus itself on the DTS file. With this commit the OFW GPIO bus is fully functional on BBB and RPi. GPIO controllers which want to use the OFW GPIO bus will need similar changes. r261846: Make the gpioled(4) work out of the box on BBB. Add gpioled(4) to BEAGLEBONE kernel and add the description of the four on-board leds of beaglebone-black to its DTS file. r262194: Remove an unnecessary header. r262522: Fix make depend for iicbus. r262559: Inspired by r262522, fix make depend. This fixes the build of gpio modules. diff 266105 Thu May 15 01:44:32 MDT 2014 loos MFC r258046, r258047, r258050, r259035, r259036, r259037, r261842, r261843, r261844, r261845, r261846, r262194, r262522, r262559 r258046: Fix a typo on a comment in ofw_bus_if.m, the default method will return -1 when a node doesn't exist. r258047: Move the KASSERT() check to the point before the increase of number of pins. r258050: Fix gpiobus to return BUS_PROBE_GENERIC insted of BUS_PROBE_SPECIFIC (0) so it can be overriden by its OFW/FDT version. Give a chance for GPIO devices that implement the device_identify method to attach. r259035: Remove unnecessary includes and an unused softc variable. While here apply two minor style(9) fixes. r259036: Move the GPIOBUS_SET_PINFLAGS(..., ..., pin, GPIO_PIN_OUTPUT) to led(4) control callback function. This makes gpioled(4) works even if the pin is accidentally set to an input. r259037: Fix the pin value reading on AM335x. Because of the inverted logic it was always returning '0' for all the reads, even for the outputs. It is now known to work with gpioiic(4) and gpioled(4). r261842: Add an OFW GPIO compatible bus. This allows the use of the DTS files to describe GPIO bindings in the system. Move the GPIOBUS lock macros to gpiobusvar.h as they are now shared between the OFW and the non OFW versions of GPIO bus. Export gpiobus_print_pins() so it can also be used on the OFW GPIO bus. r261843: Add OFW support to the in tree gpio compatible devices: gpioiic(4) and gpioled(4). Tested on RPi and BBB (using the hardware I2C controller and gpioiic(4) for the I2C tests). It was also verified for regressions on RSPRO (MIPS/ar71xx) used as reference for a non OFW-based system. Update the gpioled(4) and gpioiic(4) man pages with some details and examples about the FDT/OFW support. Some compatibility details pointed out by imp@ will follow in subsequent commits. r261844: Allow the use of OFW I2C bus together with iicbb(4) on OFW-based systems. This change makes ofw_iicbus attach to iicbb(4) controllers in addition to the already supported i2c host bridges (iichb). On iicbb(4) allow the direct access of the OFW parent node by its children, so they can be directly attached to iicbb(4) node on the DTS without the need of describing the i2c bus. r261845: Allow the use of the OFW GPIO bus for ti_gpio and bcm2835_gpio. With this change the gpio children can be described as directly connected to the GPIO controller without the need of describing the OFW GPIO bus itself on the DTS file. With this commit the OFW GPIO bus is fully functional on BBB and RPi. GPIO controllers which want to use the OFW GPIO bus will need similar changes. r261846: Make the gpioled(4) work out of the box on BBB. Add gpioled(4) to BEAGLEBONE kernel and add the description of the four on-board leds of beaglebone-black to its DTS file. r262194: Remove an unnecessary header. r262522: Fix make depend for iicbus. r262559: Inspired by r262522, fix make depend. This fixes the build of gpio modules. diff 266105 Thu May 15 01:44:32 MDT 2014 loos MFC r258046, r258047, r258050, r259035, r259036, r259037, r261842, r261843, r261844, r261845, r261846, r262194, r262522, r262559 r258046: Fix a typo on a comment in ofw_bus_if.m, the default method will return -1 when a node doesn't exist. r258047: Move the KASSERT() check to the point before the increase of number of pins. r258050: Fix gpiobus to return BUS_PROBE_GENERIC insted of BUS_PROBE_SPECIFIC (0) so it can be overriden by its OFW/FDT version. Give a chance for GPIO devices that implement the device_identify method to attach. r259035: Remove unnecessary includes and an unused softc variable. While here apply two minor style(9) fixes. r259036: Move the GPIOBUS_SET_PINFLAGS(..., ..., pin, GPIO_PIN_OUTPUT) to led(4) control callback function. This makes gpioled(4) works even if the pin is accidentally set to an input. r259037: Fix the pin value reading on AM335x. Because of the inverted logic it was always returning '0' for all the reads, even for the outputs. It is now known to work with gpioiic(4) and gpioled(4). r261842: Add an OFW GPIO compatible bus. This allows the use of the DTS files to describe GPIO bindings in the system. Move the GPIOBUS lock macros to gpiobusvar.h as they are now shared between the OFW and the non OFW versions of GPIO bus. Export gpiobus_print_pins() so it can also be used on the OFW GPIO bus. r261843: Add OFW support to the in tree gpio compatible devices: gpioiic(4) and gpioled(4). Tested on RPi and BBB (using the hardware I2C controller and gpioiic(4) for the I2C tests). It was also verified for regressions on RSPRO (MIPS/ar71xx) used as reference for a non OFW-based system. Update the gpioled(4) and gpioiic(4) man pages with some details and examples about the FDT/OFW support. Some compatibility details pointed out by imp@ will follow in subsequent commits. r261844: Allow the use of OFW I2C bus together with iicbb(4) on OFW-based systems. This change makes ofw_iicbus attach to iicbb(4) controllers in addition to the already supported i2c host bridges (iichb). On iicbb(4) allow the direct access of the OFW parent node by its children, so they can be directly attached to iicbb(4) node on the DTS without the need of describing the i2c bus. r261845: Allow the use of the OFW GPIO bus for ti_gpio and bcm2835_gpio. With this change the gpio children can be described as directly connected to the GPIO controller without the need of describing the OFW GPIO bus itself on the DTS file. With this commit the OFW GPIO bus is fully functional on BBB and RPi. GPIO controllers which want to use the OFW GPIO bus will need similar changes. r261846: Make the gpioled(4) work out of the box on BBB. Add gpioled(4) to BEAGLEBONE kernel and add the description of the four on-board leds of beaglebone-black to its DTS file. r262194: Remove an unnecessary header. r262522: Fix make depend for iicbus. r262559: Inspired by r262522, fix make depend. This fixes the build of gpio modules. diff 266105 Thu May 15 01:44:32 MDT 2014 loos MFC r258046, r258047, r258050, r259035, r259036, r259037, r261842, r261843, r261844, r261845, r261846, r262194, r262522, r262559 r258046: Fix a typo on a comment in ofw_bus_if.m, the default method will return -1 when a node doesn't exist. r258047: Move the KASSERT() check to the point before the increase of number of pins. r258050: Fix gpiobus to return BUS_PROBE_GENERIC insted of BUS_PROBE_SPECIFIC (0) so it can be overriden by its OFW/FDT version. Give a chance for GPIO devices that implement the device_identify method to attach. r259035: Remove unnecessary includes and an unused softc variable. While here apply two minor style(9) fixes. r259036: Move the GPIOBUS_SET_PINFLAGS(..., ..., pin, GPIO_PIN_OUTPUT) to led(4) control callback function. This makes gpioled(4) works even if the pin is accidentally set to an input. r259037: Fix the pin value reading on AM335x. Because of the inverted logic it was always returning '0' for all the reads, even for the outputs. It is now known to work with gpioiic(4) and gpioled(4). r261842: Add an OFW GPIO compatible bus. This allows the use of the DTS files to describe GPIO bindings in the system. Move the GPIOBUS lock macros to gpiobusvar.h as they are now shared between the OFW and the non OFW versions of GPIO bus. Export gpiobus_print_pins() so it can also be used on the OFW GPIO bus. r261843: Add OFW support to the in tree gpio compatible devices: gpioiic(4) and gpioled(4). Tested on RPi and BBB (using the hardware I2C controller and gpioiic(4) for the I2C tests). It was also verified for regressions on RSPRO (MIPS/ar71xx) used as reference for a non OFW-based system. Update the gpioled(4) and gpioiic(4) man pages with some details and examples about the FDT/OFW support. Some compatibility details pointed out by imp@ will follow in subsequent commits. r261844: Allow the use of OFW I2C bus together with iicbb(4) on OFW-based systems. This change makes ofw_iicbus attach to iicbb(4) controllers in addition to the already supported i2c host bridges (iichb). On iicbb(4) allow the direct access of the OFW parent node by its children, so they can be directly attached to iicbb(4) node on the DTS without the need of describing the i2c bus. r261845: Allow the use of the OFW GPIO bus for ti_gpio and bcm2835_gpio. With this change the gpio children can be described as directly connected to the GPIO controller without the need of describing the OFW GPIO bus itself on the DTS file. With this commit the OFW GPIO bus is fully functional on BBB and RPi. GPIO controllers which want to use the OFW GPIO bus will need similar changes. r261846: Make the gpioled(4) work out of the box on BBB. Add gpioled(4) to BEAGLEBONE kernel and add the description of the four on-board leds of beaglebone-black to its DTS file. r262194: Remove an unnecessary header. r262522: Fix make depend for iicbus. r262559: Inspired by r262522, fix make depend. This fixes the build of gpio modules. diff 266105 Thu May 15 01:44:32 MDT 2014 loos MFC r258046, r258047, r258050, r259035, r259036, r259037, r261842, r261843, r261844, r261845, r261846, r262194, r262522, r262559 r258046: Fix a typo on a comment in ofw_bus_if.m, the default method will return -1 when a node doesn't exist. r258047: Move the KASSERT() check to the point before the increase of number of pins. r258050: Fix gpiobus to return BUS_PROBE_GENERIC insted of BUS_PROBE_SPECIFIC (0) so it can be overriden by its OFW/FDT version. Give a chance for GPIO devices that implement the device_identify method to attach. r259035: Remove unnecessary includes and an unused softc variable. While here apply two minor style(9) fixes. r259036: Move the GPIOBUS_SET_PINFLAGS(..., ..., pin, GPIO_PIN_OUTPUT) to led(4) control callback function. This makes gpioled(4) works even if the pin is accidentally set to an input. r259037: Fix the pin value reading on AM335x. Because of the inverted logic it was always returning '0' for all the reads, even for the outputs. It is now known to work with gpioiic(4) and gpioled(4). r261842: Add an OFW GPIO compatible bus. This allows the use of the DTS files to describe GPIO bindings in the system. Move the GPIOBUS lock macros to gpiobusvar.h as they are now shared between the OFW and the non OFW versions of GPIO bus. Export gpiobus_print_pins() so it can also be used on the OFW GPIO bus. r261843: Add OFW support to the in tree gpio compatible devices: gpioiic(4) and gpioled(4). Tested on RPi and BBB (using the hardware I2C controller and gpioiic(4) for the I2C tests). It was also verified for regressions on RSPRO (MIPS/ar71xx) used as reference for a non OFW-based system. Update the gpioled(4) and gpioiic(4) man pages with some details and examples about the FDT/OFW support. Some compatibility details pointed out by imp@ will follow in subsequent commits. r261844: Allow the use of OFW I2C bus together with iicbb(4) on OFW-based systems. This change makes ofw_iicbus attach to iicbb(4) controllers in addition to the already supported i2c host bridges (iichb). On iicbb(4) allow the direct access of the OFW parent node by its children, so they can be directly attached to iicbb(4) node on the DTS without the need of describing the i2c bus. r261845: Allow the use of the OFW GPIO bus for ti_gpio and bcm2835_gpio. With this change the gpio children can be described as directly connected to the GPIO controller without the need of describing the OFW GPIO bus itself on the DTS file. With this commit the OFW GPIO bus is fully functional on BBB and RPi. GPIO controllers which want to use the OFW GPIO bus will need similar changes. r261846: Make the gpioled(4) work out of the box on BBB. Add gpioled(4) to BEAGLEBONE kernel and add the description of the four on-board leds of beaglebone-black to its DTS file. r262194: Remove an unnecessary header. r262522: Fix make depend for iicbus. r262559: Inspired by r262522, fix make depend. This fixes the build of gpio modules. diff 266105 Thu May 15 01:44:32 MDT 2014 loos MFC r258046, r258047, r258050, r259035, r259036, r259037, r261842, r261843, r261844, r261845, r261846, r262194, r262522, r262559 r258046: Fix a typo on a comment in ofw_bus_if.m, the default method will return -1 when a node doesn't exist. r258047: Move the KASSERT() check to the point before the increase of number of pins. r258050: Fix gpiobus to return BUS_PROBE_GENERIC insted of BUS_PROBE_SPECIFIC (0) so it can be overriden by its OFW/FDT version. Give a chance for GPIO devices that implement the device_identify method to attach. r259035: Remove unnecessary includes and an unused softc variable. While here apply two minor style(9) fixes. r259036: Move the GPIOBUS_SET_PINFLAGS(..., ..., pin, GPIO_PIN_OUTPUT) to led(4) control callback function. This makes gpioled(4) works even if the pin is accidentally set to an input. r259037: Fix the pin value reading on AM335x. Because of the inverted logic it was always returning '0' for all the reads, even for the outputs. It is now known to work with gpioiic(4) and gpioled(4). r261842: Add an OFW GPIO compatible bus. This allows the use of the DTS files to describe GPIO bindings in the system. Move the GPIOBUS lock macros to gpiobusvar.h as they are now shared between the OFW and the non OFW versions of GPIO bus. Export gpiobus_print_pins() so it can also be used on the OFW GPIO bus. r261843: Add OFW support to the in tree gpio compatible devices: gpioiic(4) and gpioled(4). Tested on RPi and BBB (using the hardware I2C controller and gpioiic(4) for the I2C tests). It was also verified for regressions on RSPRO (MIPS/ar71xx) used as reference for a non OFW-based system. Update the gpioled(4) and gpioiic(4) man pages with some details and examples about the FDT/OFW support. Some compatibility details pointed out by imp@ will follow in subsequent commits. r261844: Allow the use of OFW I2C bus together with iicbb(4) on OFW-based systems. This change makes ofw_iicbus attach to iicbb(4) controllers in addition to the already supported i2c host bridges (iichb). On iicbb(4) allow the direct access of the OFW parent node by its children, so they can be directly attached to iicbb(4) node on the DTS without the need of describing the i2c bus. r261845: Allow the use of the OFW GPIO bus for ti_gpio and bcm2835_gpio. With this change the gpio children can be described as directly connected to the GPIO controller without the need of describing the OFW GPIO bus itself on the DTS file. With this commit the OFW GPIO bus is fully functional on BBB and RPi. GPIO controllers which want to use the OFW GPIO bus will need similar changes. r261846: Make the gpioled(4) work out of the box on BBB. Add gpioled(4) to BEAGLEBONE kernel and add the description of the four on-board leds of beaglebone-black to its DTS file. r262194: Remove an unnecessary header. r262522: Fix make depend for iicbus. r262559: Inspired by r262522, fix make depend. This fixes the build of gpio modules. diff 266105 Thu May 15 01:44:32 MDT 2014 loos MFC r258046, r258047, r258050, r259035, r259036, r259037, r261842, r261843, r261844, r261845, r261846, r262194, r262522, r262559 r258046: Fix a typo on a comment in ofw_bus_if.m, the default method will return -1 when a node doesn't exist. r258047: Move the KASSERT() check to the point before the increase of number of pins. r258050: Fix gpiobus to return BUS_PROBE_GENERIC insted of BUS_PROBE_SPECIFIC (0) so it can be overriden by its OFW/FDT version. Give a chance for GPIO devices that implement the device_identify method to attach. r259035: Remove unnecessary includes and an unused softc variable. While here apply two minor style(9) fixes. r259036: Move the GPIOBUS_SET_PINFLAGS(..., ..., pin, GPIO_PIN_OUTPUT) to led(4) control callback function. This makes gpioled(4) works even if the pin is accidentally set to an input. r259037: Fix the pin value reading on AM335x. Because of the inverted logic it was always returning '0' for all the reads, even for the outputs. It is now known to work with gpioiic(4) and gpioled(4). r261842: Add an OFW GPIO compatible bus. This allows the use of the DTS files to describe GPIO bindings in the system. Move the GPIOBUS lock macros to gpiobusvar.h as they are now shared between the OFW and the non OFW versions of GPIO bus. Export gpiobus_print_pins() so it can also be used on the OFW GPIO bus. r261843: Add OFW support to the in tree gpio compatible devices: gpioiic(4) and gpioled(4). Tested on RPi and BBB (using the hardware I2C controller and gpioiic(4) for the I2C tests). It was also verified for regressions on RSPRO (MIPS/ar71xx) used as reference for a non OFW-based system. Update the gpioled(4) and gpioiic(4) man pages with some details and examples about the FDT/OFW support. Some compatibility details pointed out by imp@ will follow in subsequent commits. r261844: Allow the use of OFW I2C bus together with iicbb(4) on OFW-based systems. This change makes ofw_iicbus attach to iicbb(4) controllers in addition to the already supported i2c host bridges (iichb). On iicbb(4) allow the direct access of the OFW parent node by its children, so they can be directly attached to iicbb(4) node on the DTS without the need of describing the i2c bus. r261845: Allow the use of the OFW GPIO bus for ti_gpio and bcm2835_gpio. With this change the gpio children can be described as directly connected to the GPIO controller without the need of describing the OFW GPIO bus itself on the DTS file. With this commit the OFW GPIO bus is fully functional on BBB and RPi. GPIO controllers which want to use the OFW GPIO bus will need similar changes. r261846: Make the gpioled(4) work out of the box on BBB. Add gpioled(4) to BEAGLEBONE kernel and add the description of the four on-board leds of beaglebone-black to its DTS file. r262194: Remove an unnecessary header. r262522: Fix make depend for iicbus. r262559: Inspired by r262522, fix make depend. This fixes the build of gpio modules. diff 266105 Thu May 15 01:44:32 MDT 2014 loos MFC r258046, r258047, r258050, r259035, r259036, r259037, r261842, r261843, r261844, r261845, r261846, r262194, r262522, r262559 r258046: Fix a typo on a comment in ofw_bus_if.m, the default method will return -1 when a node doesn't exist. r258047: Move the KASSERT() check to the point before the increase of number of pins. r258050: Fix gpiobus to return BUS_PROBE_GENERIC insted of BUS_PROBE_SPECIFIC (0) so it can be overriden by its OFW/FDT version. Give a chance for GPIO devices that implement the device_identify method to attach. r259035: Remove unnecessary includes and an unused softc variable. While here apply two minor style(9) fixes. r259036: Move the GPIOBUS_SET_PINFLAGS(..., ..., pin, GPIO_PIN_OUTPUT) to led(4) control callback function. This makes gpioled(4) works even if the pin is accidentally set to an input. r259037: Fix the pin value reading on AM335x. Because of the inverted logic it was always returning '0' for all the reads, even for the outputs. It is now known to work with gpioiic(4) and gpioled(4). r261842: Add an OFW GPIO compatible bus. This allows the use of the DTS files to describe GPIO bindings in the system. Move the GPIOBUS lock macros to gpiobusvar.h as they are now shared between the OFW and the non OFW versions of GPIO bus. Export gpiobus_print_pins() so it can also be used on the OFW GPIO bus. r261843: Add OFW support to the in tree gpio compatible devices: gpioiic(4) and gpioled(4). Tested on RPi and BBB (using the hardware I2C controller and gpioiic(4) for the I2C tests). It was also verified for regressions on RSPRO (MIPS/ar71xx) used as reference for a non OFW-based system. Update the gpioled(4) and gpioiic(4) man pages with some details and examples about the FDT/OFW support. Some compatibility details pointed out by imp@ will follow in subsequent commits. r261844: Allow the use of OFW I2C bus together with iicbb(4) on OFW-based systems. This change makes ofw_iicbus attach to iicbb(4) controllers in addition to the already supported i2c host bridges (iichb). On iicbb(4) allow the direct access of the OFW parent node by its children, so they can be directly attached to iicbb(4) node on the DTS without the need of describing the i2c bus. r261845: Allow the use of the OFW GPIO bus for ti_gpio and bcm2835_gpio. With this change the gpio children can be described as directly connected to the GPIO controller without the need of describing the OFW GPIO bus itself on the DTS file. With this commit the OFW GPIO bus is fully functional on BBB and RPi. GPIO controllers which want to use the OFW GPIO bus will need similar changes. r261846: Make the gpioled(4) work out of the box on BBB. Add gpioled(4) to BEAGLEBONE kernel and add the description of the four on-board leds of beaglebone-black to its DTS file. r262194: Remove an unnecessary header. r262522: Fix make depend for iicbus. r262559: Inspired by r262522, fix make depend. This fixes the build of gpio modules. diff 266105 Thu May 15 01:44:32 MDT 2014 loos MFC r258046, r258047, r258050, r259035, r259036, r259037, r261842, r261843, r261844, r261845, r261846, r262194, r262522, r262559 r258046: Fix a typo on a comment in ofw_bus_if.m, the default method will return -1 when a node doesn't exist. r258047: Move the KASSERT() check to the point before the increase of number of pins. r258050: Fix gpiobus to return BUS_PROBE_GENERIC insted of BUS_PROBE_SPECIFIC (0) so it can be overriden by its OFW/FDT version. Give a chance for GPIO devices that implement the device_identify method to attach. r259035: Remove unnecessary includes and an unused softc variable. While here apply two minor style(9) fixes. r259036: Move the GPIOBUS_SET_PINFLAGS(..., ..., pin, GPIO_PIN_OUTPUT) to led(4) control callback function. This makes gpioled(4) works even if the pin is accidentally set to an input. r259037: Fix the pin value reading on AM335x. Because of the inverted logic it was always returning '0' for all the reads, even for the outputs. It is now known to work with gpioiic(4) and gpioled(4). r261842: Add an OFW GPIO compatible bus. This allows the use of the DTS files to describe GPIO bindings in the system. Move the GPIOBUS lock macros to gpiobusvar.h as they are now shared between the OFW and the non OFW versions of GPIO bus. Export gpiobus_print_pins() so it can also be used on the OFW GPIO bus. r261843: Add OFW support to the in tree gpio compatible devices: gpioiic(4) and gpioled(4). Tested on RPi and BBB (using the hardware I2C controller and gpioiic(4) for the I2C tests). It was also verified for regressions on RSPRO (MIPS/ar71xx) used as reference for a non OFW-based system. Update the gpioled(4) and gpioiic(4) man pages with some details and examples about the FDT/OFW support. Some compatibility details pointed out by imp@ will follow in subsequent commits. r261844: Allow the use of OFW I2C bus together with iicbb(4) on OFW-based systems. This change makes ofw_iicbus attach to iicbb(4) controllers in addition to the already supported i2c host bridges (iichb). On iicbb(4) allow the direct access of the OFW parent node by its children, so they can be directly attached to iicbb(4) node on the DTS without the need of describing the i2c bus. r261845: Allow the use of the OFW GPIO bus for ti_gpio and bcm2835_gpio. With this change the gpio children can be described as directly connected to the GPIO controller without the need of describing the OFW GPIO bus itself on the DTS file. With this commit the OFW GPIO bus is fully functional on BBB and RPi. GPIO controllers which want to use the OFW GPIO bus will need similar changes. r261846: Make the gpioled(4) work out of the box on BBB. Add gpioled(4) to BEAGLEBONE kernel and add the description of the four on-board leds of beaglebone-black to its DTS file. r262194: Remove an unnecessary header. r262522: Fix make depend for iicbus. r262559: Inspired by r262522, fix make depend. This fixes the build of gpio modules. diff 266105 Thu May 15 01:44:32 MDT 2014 loos MFC r258046, r258047, r258050, r259035, r259036, r259037, r261842, r261843, r261844, r261845, r261846, r262194, r262522, r262559 r258046: Fix a typo on a comment in ofw_bus_if.m, the default method will return -1 when a node doesn't exist. r258047: Move the KASSERT() check to the point before the increase of number of pins. r258050: Fix gpiobus to return BUS_PROBE_GENERIC insted of BUS_PROBE_SPECIFIC (0) so it can be overriden by its OFW/FDT version. Give a chance for GPIO devices that implement the device_identify method to attach. r259035: Remove unnecessary includes and an unused softc variable. While here apply two minor style(9) fixes. r259036: Move the GPIOBUS_SET_PINFLAGS(..., ..., pin, GPIO_PIN_OUTPUT) to led(4) control callback function. This makes gpioled(4) works even if the pin is accidentally set to an input. r259037: Fix the pin value reading on AM335x. Because of the inverted logic it was always returning '0' for all the reads, even for the outputs. It is now known to work with gpioiic(4) and gpioled(4). r261842: Add an OFW GPIO compatible bus. This allows the use of the DTS files to describe GPIO bindings in the system. Move the GPIOBUS lock macros to gpiobusvar.h as they are now shared between the OFW and the non OFW versions of GPIO bus. Export gpiobus_print_pins() so it can also be used on the OFW GPIO bus. r261843: Add OFW support to the in tree gpio compatible devices: gpioiic(4) and gpioled(4). Tested on RPi and BBB (using the hardware I2C controller and gpioiic(4) for the I2C tests). It was also verified for regressions on RSPRO (MIPS/ar71xx) used as reference for a non OFW-based system. Update the gpioled(4) and gpioiic(4) man pages with some details and examples about the FDT/OFW support. Some compatibility details pointed out by imp@ will follow in subsequent commits. r261844: Allow the use of OFW I2C bus together with iicbb(4) on OFW-based systems. This change makes ofw_iicbus attach to iicbb(4) controllers in addition to the already supported i2c host bridges (iichb). On iicbb(4) allow the direct access of the OFW parent node by its children, so they can be directly attached to iicbb(4) node on the DTS without the need of describing the i2c bus. r261845: Allow the use of the OFW GPIO bus for ti_gpio and bcm2835_gpio. With this change the gpio children can be described as directly connected to the GPIO controller without the need of describing the OFW GPIO bus itself on the DTS file. With this commit the OFW GPIO bus is fully functional on BBB and RPi. GPIO controllers which want to use the OFW GPIO bus will need similar changes. r261846: Make the gpioled(4) work out of the box on BBB. Add gpioled(4) to BEAGLEBONE kernel and add the description of the four on-board leds of beaglebone-black to its DTS file. r262194: Remove an unnecessary header. r262522: Fix make depend for iicbus. r262559: Inspired by r262522, fix make depend. This fixes the build of gpio modules. |
| /freebsd-10.2-release/sys/arm/ti/ | ||
| H A D | ti_gpio.c | diff 266105 Thu May 15 01:44:32 MDT 2014 loos MFC r258046, r258047, r258050, r259035, r259036, r259037, r261842, r261843, r261844, r261845, r261846, r262194, r262522, r262559 r258046: Fix a typo on a comment in ofw_bus_if.m, the default method will return -1 when a node doesn't exist. r258047: Move the KASSERT() check to the point before the increase of number of pins. r258050: Fix gpiobus to return BUS_PROBE_GENERIC insted of BUS_PROBE_SPECIFIC (0) so it can be overriden by its OFW/FDT version. Give a chance for GPIO devices that implement the device_identify method to attach. r259035: Remove unnecessary includes and an unused softc variable. While here apply two minor style(9) fixes. r259036: Move the GPIOBUS_SET_PINFLAGS(..., ..., pin, GPIO_PIN_OUTPUT) to led(4) control callback function. This makes gpioled(4) works even if the pin is accidentally set to an input. r259037: Fix the pin value reading on AM335x. Because of the inverted logic it was always returning '0' for all the reads, even for the outputs. It is now known to work with gpioiic(4) and gpioled(4). r261842: Add an OFW GPIO compatible bus. This allows the use of the DTS files to describe GPIO bindings in the system. Move the GPIOBUS lock macros to gpiobusvar.h as they are now shared between the OFW and the non OFW versions of GPIO bus. Export gpiobus_print_pins() so it can also be used on the OFW GPIO bus. r261843: Add OFW support to the in tree gpio compatible devices: gpioiic(4) and gpioled(4). Tested on RPi and BBB (using the hardware I2C controller and gpioiic(4) for the I2C tests). It was also verified for regressions on RSPRO (MIPS/ar71xx) used as reference for a non OFW-based system. Update the gpioled(4) and gpioiic(4) man pages with some details and examples about the FDT/OFW support. Some compatibility details pointed out by imp@ will follow in subsequent commits. r261844: Allow the use of OFW I2C bus together with iicbb(4) on OFW-based systems. This change makes ofw_iicbus attach to iicbb(4) controllers in addition to the already supported i2c host bridges (iichb). On iicbb(4) allow the direct access of the OFW parent node by its children, so they can be directly attached to iicbb(4) node on the DTS without the need of describing the i2c bus. r261845: Allow the use of the OFW GPIO bus for ti_gpio and bcm2835_gpio. With this change the gpio children can be described as directly connected to the GPIO controller without the need of describing the OFW GPIO bus itself on the DTS file. With this commit the OFW GPIO bus is fully functional on BBB and RPi. GPIO controllers which want to use the OFW GPIO bus will need similar changes. r261846: Make the gpioled(4) work out of the box on BBB. Add gpioled(4) to BEAGLEBONE kernel and add the description of the four on-board leds of beaglebone-black to its DTS file. r262194: Remove an unnecessary header. r262522: Fix make depend for iicbus. r262559: Inspired by r262522, fix make depend. This fixes the build of gpio modules. diff 266105 Thu May 15 01:44:32 MDT 2014 loos MFC r258046, r258047, r258050, r259035, r259036, r259037, r261842, r261843, r261844, r261845, r261846, r262194, r262522, r262559 r258046: Fix a typo on a comment in ofw_bus_if.m, the default method will return -1 when a node doesn't exist. r258047: Move the KASSERT() check to the point before the increase of number of pins. r258050: Fix gpiobus to return BUS_PROBE_GENERIC insted of BUS_PROBE_SPECIFIC (0) so it can be overriden by its OFW/FDT version. Give a chance for GPIO devices that implement the device_identify method to attach. r259035: Remove unnecessary includes and an unused softc variable. While here apply two minor style(9) fixes. r259036: Move the GPIOBUS_SET_PINFLAGS(..., ..., pin, GPIO_PIN_OUTPUT) to led(4) control callback function. This makes gpioled(4) works even if the pin is accidentally set to an input. r259037: Fix the pin value reading on AM335x. Because of the inverted logic it was always returning '0' for all the reads, even for the outputs. It is now known to work with gpioiic(4) and gpioled(4). r261842: Add an OFW GPIO compatible bus. This allows the use of the DTS files to describe GPIO bindings in the system. Move the GPIOBUS lock macros to gpiobusvar.h as they are now shared between the OFW and the non OFW versions of GPIO bus. Export gpiobus_print_pins() so it can also be used on the OFW GPIO bus. r261843: Add OFW support to the in tree gpio compatible devices: gpioiic(4) and gpioled(4). Tested on RPi and BBB (using the hardware I2C controller and gpioiic(4) for the I2C tests). It was also verified for regressions on RSPRO (MIPS/ar71xx) used as reference for a non OFW-based system. Update the gpioled(4) and gpioiic(4) man pages with some details and examples about the FDT/OFW support. Some compatibility details pointed out by imp@ will follow in subsequent commits. r261844: Allow the use of OFW I2C bus together with iicbb(4) on OFW-based systems. This change makes ofw_iicbus attach to iicbb(4) controllers in addition to the already supported i2c host bridges (iichb). On iicbb(4) allow the direct access of the OFW parent node by its children, so they can be directly attached to iicbb(4) node on the DTS without the need of describing the i2c bus. r261845: Allow the use of the OFW GPIO bus for ti_gpio and bcm2835_gpio. With this change the gpio children can be described as directly connected to the GPIO controller without the need of describing the OFW GPIO bus itself on the DTS file. With this commit the OFW GPIO bus is fully functional on BBB and RPi. GPIO controllers which want to use the OFW GPIO bus will need similar changes. r261846: Make the gpioled(4) work out of the box on BBB. Add gpioled(4) to BEAGLEBONE kernel and add the description of the four on-board leds of beaglebone-black to its DTS file. r262194: Remove an unnecessary header. r262522: Fix make depend for iicbus. r262559: Inspired by r262522, fix make depend. This fixes the build of gpio modules. diff 266105 Thu May 15 01:44:32 MDT 2014 loos MFC r258046, r258047, r258050, r259035, r259036, r259037, r261842, r261843, r261844, r261845, r261846, r262194, r262522, r262559 r258046: Fix a typo on a comment in ofw_bus_if.m, the default method will return -1 when a node doesn't exist. r258047: Move the KASSERT() check to the point before the increase of number of pins. r258050: Fix gpiobus to return BUS_PROBE_GENERIC insted of BUS_PROBE_SPECIFIC (0) so it can be overriden by its OFW/FDT version. Give a chance for GPIO devices that implement the device_identify method to attach. r259035: Remove unnecessary includes and an unused softc variable. While here apply two minor style(9) fixes. r259036: Move the GPIOBUS_SET_PINFLAGS(..., ..., pin, GPIO_PIN_OUTPUT) to led(4) control callback function. This makes gpioled(4) works even if the pin is accidentally set to an input. r259037: Fix the pin value reading on AM335x. Because of the inverted logic it was always returning '0' for all the reads, even for the outputs. It is now known to work with gpioiic(4) and gpioled(4). r261842: Add an OFW GPIO compatible bus. This allows the use of the DTS files to describe GPIO bindings in the system. Move the GPIOBUS lock macros to gpiobusvar.h as they are now shared between the OFW and the non OFW versions of GPIO bus. Export gpiobus_print_pins() so it can also be used on the OFW GPIO bus. r261843: Add OFW support to the in tree gpio compatible devices: gpioiic(4) and gpioled(4). Tested on RPi and BBB (using the hardware I2C controller and gpioiic(4) for the I2C tests). It was also verified for regressions on RSPRO (MIPS/ar71xx) used as reference for a non OFW-based system. Update the gpioled(4) and gpioiic(4) man pages with some details and examples about the FDT/OFW support. Some compatibility details pointed out by imp@ will follow in subsequent commits. r261844: Allow the use of OFW I2C bus together with iicbb(4) on OFW-based systems. This change makes ofw_iicbus attach to iicbb(4) controllers in addition to the already supported i2c host bridges (iichb). On iicbb(4) allow the direct access of the OFW parent node by its children, so they can be directly attached to iicbb(4) node on the DTS without the need of describing the i2c bus. r261845: Allow the use of the OFW GPIO bus for ti_gpio and bcm2835_gpio. With this change the gpio children can be described as directly connected to the GPIO controller without the need of describing the OFW GPIO bus itself on the DTS file. With this commit the OFW GPIO bus is fully functional on BBB and RPi. GPIO controllers which want to use the OFW GPIO bus will need similar changes. r261846: Make the gpioled(4) work out of the box on BBB. Add gpioled(4) to BEAGLEBONE kernel and add the description of the four on-board leds of beaglebone-black to its DTS file. r262194: Remove an unnecessary header. r262522: Fix make depend for iicbus. r262559: Inspired by r262522, fix make depend. This fixes the build of gpio modules. diff 266105 Thu May 15 01:44:32 MDT 2014 loos MFC r258046, r258047, r258050, r259035, r259036, r259037, r261842, r261843, r261844, r261845, r261846, r262194, r262522, r262559 r258046: Fix a typo on a comment in ofw_bus_if.m, the default method will return -1 when a node doesn't exist. r258047: Move the KASSERT() check to the point before the increase of number of pins. r258050: Fix gpiobus to return BUS_PROBE_GENERIC insted of BUS_PROBE_SPECIFIC (0) so it can be overriden by its OFW/FDT version. Give a chance for GPIO devices that implement the device_identify method to attach. r259035: Remove unnecessary includes and an unused softc variable. While here apply two minor style(9) fixes. r259036: Move the GPIOBUS_SET_PINFLAGS(..., ..., pin, GPIO_PIN_OUTPUT) to led(4) control callback function. This makes gpioled(4) works even if the pin is accidentally set to an input. r259037: Fix the pin value reading on AM335x. Because of the inverted logic it was always returning '0' for all the reads, even for the outputs. It is now known to work with gpioiic(4) and gpioled(4). r261842: Add an OFW GPIO compatible bus. This allows the use of the DTS files to describe GPIO bindings in the system. Move the GPIOBUS lock macros to gpiobusvar.h as they are now shared between the OFW and the non OFW versions of GPIO bus. Export gpiobus_print_pins() so it can also be used on the OFW GPIO bus. r261843: Add OFW support to the in tree gpio compatible devices: gpioiic(4) and gpioled(4). Tested on RPi and BBB (using the hardware I2C controller and gpioiic(4) for the I2C tests). It was also verified for regressions on RSPRO (MIPS/ar71xx) used as reference for a non OFW-based system. Update the gpioled(4) and gpioiic(4) man pages with some details and examples about the FDT/OFW support. Some compatibility details pointed out by imp@ will follow in subsequent commits. r261844: Allow the use of OFW I2C bus together with iicbb(4) on OFW-based systems. This change makes ofw_iicbus attach to iicbb(4) controllers in addition to the already supported i2c host bridges (iichb). On iicbb(4) allow the direct access of the OFW parent node by its children, so they can be directly attached to iicbb(4) node on the DTS without the need of describing the i2c bus. r261845: Allow the use of the OFW GPIO bus for ti_gpio and bcm2835_gpio. With this change the gpio children can be described as directly connected to the GPIO controller without the need of describing the OFW GPIO bus itself on the DTS file. With this commit the OFW GPIO bus is fully functional on BBB and RPi. GPIO controllers which want to use the OFW GPIO bus will need similar changes. r261846: Make the gpioled(4) work out of the box on BBB. Add gpioled(4) to BEAGLEBONE kernel and add the description of the four on-board leds of beaglebone-black to its DTS file. r262194: Remove an unnecessary header. r262522: Fix make depend for iicbus. r262559: Inspired by r262522, fix make depend. This fixes the build of gpio modules. diff 266105 Thu May 15 01:44:32 MDT 2014 loos MFC r258046, r258047, r258050, r259035, r259036, r259037, r261842, r261843, r261844, r261845, r261846, r262194, r262522, r262559 r258046: Fix a typo on a comment in ofw_bus_if.m, the default method will return -1 when a node doesn't exist. r258047: Move the KASSERT() check to the point before the increase of number of pins. r258050: Fix gpiobus to return BUS_PROBE_GENERIC insted of BUS_PROBE_SPECIFIC (0) so it can be overriden by its OFW/FDT version. Give a chance for GPIO devices that implement the device_identify method to attach. r259035: Remove unnecessary includes and an unused softc variable. While here apply two minor style(9) fixes. r259036: Move the GPIOBUS_SET_PINFLAGS(..., ..., pin, GPIO_PIN_OUTPUT) to led(4) control callback function. This makes gpioled(4) works even if the pin is accidentally set to an input. r259037: Fix the pin value reading on AM335x. Because of the inverted logic it was always returning '0' for all the reads, even for the outputs. It is now known to work with gpioiic(4) and gpioled(4). r261842: Add an OFW GPIO compatible bus. This allows the use of the DTS files to describe GPIO bindings in the system. Move the GPIOBUS lock macros to gpiobusvar.h as they are now shared between the OFW and the non OFW versions of GPIO bus. Export gpiobus_print_pins() so it can also be used on the OFW GPIO bus. r261843: Add OFW support to the in tree gpio compatible devices: gpioiic(4) and gpioled(4). Tested on RPi and BBB (using the hardware I2C controller and gpioiic(4) for the I2C tests). It was also verified for regressions on RSPRO (MIPS/ar71xx) used as reference for a non OFW-based system. Update the gpioled(4) and gpioiic(4) man pages with some details and examples about the FDT/OFW support. Some compatibility details pointed out by imp@ will follow in subsequent commits. r261844: Allow the use of OFW I2C bus together with iicbb(4) on OFW-based systems. This change makes ofw_iicbus attach to iicbb(4) controllers in addition to the already supported i2c host bridges (iichb). On iicbb(4) allow the direct access of the OFW parent node by its children, so they can be directly attached to iicbb(4) node on the DTS without the need of describing the i2c bus. r261845: Allow the use of the OFW GPIO bus for ti_gpio and bcm2835_gpio. With this change the gpio children can be described as directly connected to the GPIO controller without the need of describing the OFW GPIO bus itself on the DTS file. With this commit the OFW GPIO bus is fully functional on BBB and RPi. GPIO controllers which want to use the OFW GPIO bus will need similar changes. r261846: Make the gpioled(4) work out of the box on BBB. Add gpioled(4) to BEAGLEBONE kernel and add the description of the four on-board leds of beaglebone-black to its DTS file. r262194: Remove an unnecessary header. r262522: Fix make depend for iicbus. r262559: Inspired by r262522, fix make depend. This fixes the build of gpio modules. diff 266105 Thu May 15 01:44:32 MDT 2014 loos MFC r258046, r258047, r258050, r259035, r259036, r259037, r261842, r261843, r261844, r261845, r261846, r262194, r262522, r262559 r258046: Fix a typo on a comment in ofw_bus_if.m, the default method will return -1 when a node doesn't exist. r258047: Move the KASSERT() check to the point before the increase of number of pins. r258050: Fix gpiobus to return BUS_PROBE_GENERIC insted of BUS_PROBE_SPECIFIC (0) so it can be overriden by its OFW/FDT version. Give a chance for GPIO devices that implement the device_identify method to attach. r259035: Remove unnecessary includes and an unused softc variable. While here apply two minor style(9) fixes. r259036: Move the GPIOBUS_SET_PINFLAGS(..., ..., pin, GPIO_PIN_OUTPUT) to led(4) control callback function. This makes gpioled(4) works even if the pin is accidentally set to an input. r259037: Fix the pin value reading on AM335x. Because of the inverted logic it was always returning '0' for all the reads, even for the outputs. It is now known to work with gpioiic(4) and gpioled(4). r261842: Add an OFW GPIO compatible bus. This allows the use of the DTS files to describe GPIO bindings in the system. Move the GPIOBUS lock macros to gpiobusvar.h as they are now shared between the OFW and the non OFW versions of GPIO bus. Export gpiobus_print_pins() so it can also be used on the OFW GPIO bus. r261843: Add OFW support to the in tree gpio compatible devices: gpioiic(4) and gpioled(4). Tested on RPi and BBB (using the hardware I2C controller and gpioiic(4) for the I2C tests). It was also verified for regressions on RSPRO (MIPS/ar71xx) used as reference for a non OFW-based system. Update the gpioled(4) and gpioiic(4) man pages with some details and examples about the FDT/OFW support. Some compatibility details pointed out by imp@ will follow in subsequent commits. r261844: Allow the use of OFW I2C bus together with iicbb(4) on OFW-based systems. This change makes ofw_iicbus attach to iicbb(4) controllers in addition to the already supported i2c host bridges (iichb). On iicbb(4) allow the direct access of the OFW parent node by its children, so they can be directly attached to iicbb(4) node on the DTS without the need of describing the i2c bus. r261845: Allow the use of the OFW GPIO bus for ti_gpio and bcm2835_gpio. With this change the gpio children can be described as directly connected to the GPIO controller without the need of describing the OFW GPIO bus itself on the DTS file. With this commit the OFW GPIO bus is fully functional on BBB and RPi. GPIO controllers which want to use the OFW GPIO bus will need similar changes. r261846: Make the gpioled(4) work out of the box on BBB. Add gpioled(4) to BEAGLEBONE kernel and add the description of the four on-board leds of beaglebone-black to its DTS file. r262194: Remove an unnecessary header. r262522: Fix make depend for iicbus. r262559: Inspired by r262522, fix make depend. This fixes the build of gpio modules. diff 266105 Thu May 15 01:44:32 MDT 2014 loos MFC r258046, r258047, r258050, r259035, r259036, r259037, r261842, r261843, r261844, r261845, r261846, r262194, r262522, r262559 r258046: Fix a typo on a comment in ofw_bus_if.m, the default method will return -1 when a node doesn't exist. r258047: Move the KASSERT() check to the point before the increase of number of pins. r258050: Fix gpiobus to return BUS_PROBE_GENERIC insted of BUS_PROBE_SPECIFIC (0) so it can be overriden by its OFW/FDT version. Give a chance for GPIO devices that implement the device_identify method to attach. r259035: Remove unnecessary includes and an unused softc variable. While here apply two minor style(9) fixes. r259036: Move the GPIOBUS_SET_PINFLAGS(..., ..., pin, GPIO_PIN_OUTPUT) to led(4) control callback function. This makes gpioled(4) works even if the pin is accidentally set to an input. r259037: Fix the pin value reading on AM335x. Because of the inverted logic it was always returning '0' for all the reads, even for the outputs. It is now known to work with gpioiic(4) and gpioled(4). r261842: Add an OFW GPIO compatible bus. This allows the use of the DTS files to describe GPIO bindings in the system. Move the GPIOBUS lock macros to gpiobusvar.h as they are now shared between the OFW and the non OFW versions of GPIO bus. Export gpiobus_print_pins() so it can also be used on the OFW GPIO bus. r261843: Add OFW support to the in tree gpio compatible devices: gpioiic(4) and gpioled(4). Tested on RPi and BBB (using the hardware I2C controller and gpioiic(4) for the I2C tests). It was also verified for regressions on RSPRO (MIPS/ar71xx) used as reference for a non OFW-based system. Update the gpioled(4) and gpioiic(4) man pages with some details and examples about the FDT/OFW support. Some compatibility details pointed out by imp@ will follow in subsequent commits. r261844: Allow the use of OFW I2C bus together with iicbb(4) on OFW-based systems. This change makes ofw_iicbus attach to iicbb(4) controllers in addition to the already supported i2c host bridges (iichb). On iicbb(4) allow the direct access of the OFW parent node by its children, so they can be directly attached to iicbb(4) node on the DTS without the need of describing the i2c bus. r261845: Allow the use of the OFW GPIO bus for ti_gpio and bcm2835_gpio. With this change the gpio children can be described as directly connected to the GPIO controller without the need of describing the OFW GPIO bus itself on the DTS file. With this commit the OFW GPIO bus is fully functional on BBB and RPi. GPIO controllers which want to use the OFW GPIO bus will need similar changes. r261846: Make the gpioled(4) work out of the box on BBB. Add gpioled(4) to BEAGLEBONE kernel and add the description of the four on-board leds of beaglebone-black to its DTS file. r262194: Remove an unnecessary header. r262522: Fix make depend for iicbus. r262559: Inspired by r262522, fix make depend. This fixes the build of gpio modules. diff 266105 Thu May 15 01:44:32 MDT 2014 loos MFC r258046, r258047, r258050, r259035, r259036, r259037, r261842, r261843, r261844, r261845, r261846, r262194, r262522, r262559 r258046: Fix a typo on a comment in ofw_bus_if.m, the default method will return -1 when a node doesn't exist. r258047: Move the KASSERT() check to the point before the increase of number of pins. r258050: Fix gpiobus to return BUS_PROBE_GENERIC insted of BUS_PROBE_SPECIFIC (0) so it can be overriden by its OFW/FDT version. Give a chance for GPIO devices that implement the device_identify method to attach. r259035: Remove unnecessary includes and an unused softc variable. While here apply two minor style(9) fixes. r259036: Move the GPIOBUS_SET_PINFLAGS(..., ..., pin, GPIO_PIN_OUTPUT) to led(4) control callback function. This makes gpioled(4) works even if the pin is accidentally set to an input. r259037: Fix the pin value reading on AM335x. Because of the inverted logic it was always returning '0' for all the reads, even for the outputs. It is now known to work with gpioiic(4) and gpioled(4). r261842: Add an OFW GPIO compatible bus. This allows the use of the DTS files to describe GPIO bindings in the system. Move the GPIOBUS lock macros to gpiobusvar.h as they are now shared between the OFW and the non OFW versions of GPIO bus. Export gpiobus_print_pins() so it can also be used on the OFW GPIO bus. r261843: Add OFW support to the in tree gpio compatible devices: gpioiic(4) and gpioled(4). Tested on RPi and BBB (using the hardware I2C controller and gpioiic(4) for the I2C tests). It was also verified for regressions on RSPRO (MIPS/ar71xx) used as reference for a non OFW-based system. Update the gpioled(4) and gpioiic(4) man pages with some details and examples about the FDT/OFW support. Some compatibility details pointed out by imp@ will follow in subsequent commits. r261844: Allow the use of OFW I2C bus together with iicbb(4) on OFW-based systems. This change makes ofw_iicbus attach to iicbb(4) controllers in addition to the already supported i2c host bridges (iichb). On iicbb(4) allow the direct access of the OFW parent node by its children, so they can be directly attached to iicbb(4) node on the DTS without the need of describing the i2c bus. r261845: Allow the use of the OFW GPIO bus for ti_gpio and bcm2835_gpio. With this change the gpio children can be described as directly connected to the GPIO controller without the need of describing the OFW GPIO bus itself on the DTS file. With this commit the OFW GPIO bus is fully functional on BBB and RPi. GPIO controllers which want to use the OFW GPIO bus will need similar changes. r261846: Make the gpioled(4) work out of the box on BBB. Add gpioled(4) to BEAGLEBONE kernel and add the description of the four on-board leds of beaglebone-black to its DTS file. r262194: Remove an unnecessary header. r262522: Fix make depend for iicbus. r262559: Inspired by r262522, fix make depend. This fixes the build of gpio modules. diff 266105 Thu May 15 01:44:32 MDT 2014 loos MFC r258046, r258047, r258050, r259035, r259036, r259037, r261842, r261843, r261844, r261845, r261846, r262194, r262522, r262559 r258046: Fix a typo on a comment in ofw_bus_if.m, the default method will return -1 when a node doesn't exist. r258047: Move the KASSERT() check to the point before the increase of number of pins. r258050: Fix gpiobus to return BUS_PROBE_GENERIC insted of BUS_PROBE_SPECIFIC (0) so it can be overriden by its OFW/FDT version. Give a chance for GPIO devices that implement the device_identify method to attach. r259035: Remove unnecessary includes and an unused softc variable. While here apply two minor style(9) fixes. r259036: Move the GPIOBUS_SET_PINFLAGS(..., ..., pin, GPIO_PIN_OUTPUT) to led(4) control callback function. This makes gpioled(4) works even if the pin is accidentally set to an input. r259037: Fix the pin value reading on AM335x. Because of the inverted logic it was always returning '0' for all the reads, even for the outputs. It is now known to work with gpioiic(4) and gpioled(4). r261842: Add an OFW GPIO compatible bus. This allows the use of the DTS files to describe GPIO bindings in the system. Move the GPIOBUS lock macros to gpiobusvar.h as they are now shared between the OFW and the non OFW versions of GPIO bus. Export gpiobus_print_pins() so it can also be used on the OFW GPIO bus. r261843: Add OFW support to the in tree gpio compatible devices: gpioiic(4) and gpioled(4). Tested on RPi and BBB (using the hardware I2C controller and gpioiic(4) for the I2C tests). It was also verified for regressions on RSPRO (MIPS/ar71xx) used as reference for a non OFW-based system. Update the gpioled(4) and gpioiic(4) man pages with some details and examples about the FDT/OFW support. Some compatibility details pointed out by imp@ will follow in subsequent commits. r261844: Allow the use of OFW I2C bus together with iicbb(4) on OFW-based systems. This change makes ofw_iicbus attach to iicbb(4) controllers in addition to the already supported i2c host bridges (iichb). On iicbb(4) allow the direct access of the OFW parent node by its children, so they can be directly attached to iicbb(4) node on the DTS without the need of describing the i2c bus. r261845: Allow the use of the OFW GPIO bus for ti_gpio and bcm2835_gpio. With this change the gpio children can be described as directly connected to the GPIO controller without the need of describing the OFW GPIO bus itself on the DTS file. With this commit the OFW GPIO bus is fully functional on BBB and RPi. GPIO controllers which want to use the OFW GPIO bus will need similar changes. r261846: Make the gpioled(4) work out of the box on BBB. Add gpioled(4) to BEAGLEBONE kernel and add the description of the four on-board leds of beaglebone-black to its DTS file. r262194: Remove an unnecessary header. r262522: Fix make depend for iicbus. r262559: Inspired by r262522, fix make depend. This fixes the build of gpio modules. diff 266105 Thu May 15 01:44:32 MDT 2014 loos MFC r258046, r258047, r258050, r259035, r259036, r259037, r261842, r261843, r261844, r261845, r261846, r262194, r262522, r262559 r258046: Fix a typo on a comment in ofw_bus_if.m, the default method will return -1 when a node doesn't exist. r258047: Move the KASSERT() check to the point before the increase of number of pins. r258050: Fix gpiobus to return BUS_PROBE_GENERIC insted of BUS_PROBE_SPECIFIC (0) so it can be overriden by its OFW/FDT version. Give a chance for GPIO devices that implement the device_identify method to attach. r259035: Remove unnecessary includes and an unused softc variable. While here apply two minor style(9) fixes. r259036: Move the GPIOBUS_SET_PINFLAGS(..., ..., pin, GPIO_PIN_OUTPUT) to led(4) control callback function. This makes gpioled(4) works even if the pin is accidentally set to an input. r259037: Fix the pin value reading on AM335x. Because of the inverted logic it was always returning '0' for all the reads, even for the outputs. It is now known to work with gpioiic(4) and gpioled(4). r261842: Add an OFW GPIO compatible bus. This allows the use of the DTS files to describe GPIO bindings in the system. Move the GPIOBUS lock macros to gpiobusvar.h as they are now shared between the OFW and the non OFW versions of GPIO bus. Export gpiobus_print_pins() so it can also be used on the OFW GPIO bus. r261843: Add OFW support to the in tree gpio compatible devices: gpioiic(4) and gpioled(4). Tested on RPi and BBB (using the hardware I2C controller and gpioiic(4) for the I2C tests). It was also verified for regressions on RSPRO (MIPS/ar71xx) used as reference for a non OFW-based system. Update the gpioled(4) and gpioiic(4) man pages with some details and examples about the FDT/OFW support. Some compatibility details pointed out by imp@ will follow in subsequent commits. r261844: Allow the use of OFW I2C bus together with iicbb(4) on OFW-based systems. This change makes ofw_iicbus attach to iicbb(4) controllers in addition to the already supported i2c host bridges (iichb). On iicbb(4) allow the direct access of the OFW parent node by its children, so they can be directly attached to iicbb(4) node on the DTS without the need of describing the i2c bus. r261845: Allow the use of the OFW GPIO bus for ti_gpio and bcm2835_gpio. With this change the gpio children can be described as directly connected to the GPIO controller without the need of describing the OFW GPIO bus itself on the DTS file. With this commit the OFW GPIO bus is fully functional on BBB and RPi. GPIO controllers which want to use the OFW GPIO bus will need similar changes. r261846: Make the gpioled(4) work out of the box on BBB. Add gpioled(4) to BEAGLEBONE kernel and add the description of the four on-board leds of beaglebone-black to its DTS file. r262194: Remove an unnecessary header. r262522: Fix make depend for iicbus. r262559: Inspired by r262522, fix make depend. This fixes the build of gpio modules. diff 266105 Thu May 15 01:44:32 MDT 2014 loos MFC r258046, r258047, r258050, r259035, r259036, r259037, r261842, r261843, r261844, r261845, r261846, r262194, r262522, r262559 r258046: Fix a typo on a comment in ofw_bus_if.m, the default method will return -1 when a node doesn't exist. r258047: Move the KASSERT() check to the point before the increase of number of pins. r258050: Fix gpiobus to return BUS_PROBE_GENERIC insted of BUS_PROBE_SPECIFIC (0) so it can be overriden by its OFW/FDT version. Give a chance for GPIO devices that implement the device_identify method to attach. r259035: Remove unnecessary includes and an unused softc variable. While here apply two minor style(9) fixes. r259036: Move the GPIOBUS_SET_PINFLAGS(..., ..., pin, GPIO_PIN_OUTPUT) to led(4) control callback function. This makes gpioled(4) works even if the pin is accidentally set to an input. r259037: Fix the pin value reading on AM335x. Because of the inverted logic it was always returning '0' for all the reads, even for the outputs. It is now known to work with gpioiic(4) and gpioled(4). r261842: Add an OFW GPIO compatible bus. This allows the use of the DTS files to describe GPIO bindings in the system. Move the GPIOBUS lock macros to gpiobusvar.h as they are now shared between the OFW and the non OFW versions of GPIO bus. Export gpiobus_print_pins() so it can also be used on the OFW GPIO bus. r261843: Add OFW support to the in tree gpio compatible devices: gpioiic(4) and gpioled(4). Tested on RPi and BBB (using the hardware I2C controller and gpioiic(4) for the I2C tests). It was also verified for regressions on RSPRO (MIPS/ar71xx) used as reference for a non OFW-based system. Update the gpioled(4) and gpioiic(4) man pages with some details and examples about the FDT/OFW support. Some compatibility details pointed out by imp@ will follow in subsequent commits. r261844: Allow the use of OFW I2C bus together with iicbb(4) on OFW-based systems. This change makes ofw_iicbus attach to iicbb(4) controllers in addition to the already supported i2c host bridges (iichb). On iicbb(4) allow the direct access of the OFW parent node by its children, so they can be directly attached to iicbb(4) node on the DTS without the need of describing the i2c bus. r261845: Allow the use of the OFW GPIO bus for ti_gpio and bcm2835_gpio. With this change the gpio children can be described as directly connected to the GPIO controller without the need of describing the OFW GPIO bus itself on the DTS file. With this commit the OFW GPIO bus is fully functional on BBB and RPi. GPIO controllers which want to use the OFW GPIO bus will need similar changes. r261846: Make the gpioled(4) work out of the box on BBB. Add gpioled(4) to BEAGLEBONE kernel and add the description of the four on-board leds of beaglebone-black to its DTS file. r262194: Remove an unnecessary header. r262522: Fix make depend for iicbus. r262559: Inspired by r262522, fix make depend. This fixes the build of gpio modules. diff 266105 Thu May 15 01:44:32 MDT 2014 loos MFC r258046, r258047, r258050, r259035, r259036, r259037, r261842, r261843, r261844, r261845, r261846, r262194, r262522, r262559 r258046: Fix a typo on a comment in ofw_bus_if.m, the default method will return -1 when a node doesn't exist. r258047: Move the KASSERT() check to the point before the increase of number of pins. r258050: Fix gpiobus to return BUS_PROBE_GENERIC insted of BUS_PROBE_SPECIFIC (0) so it can be overriden by its OFW/FDT version. Give a chance for GPIO devices that implement the device_identify method to attach. r259035: Remove unnecessary includes and an unused softc variable. While here apply two minor style(9) fixes. r259036: Move the GPIOBUS_SET_PINFLAGS(..., ..., pin, GPIO_PIN_OUTPUT) to led(4) control callback function. This makes gpioled(4) works even if the pin is accidentally set to an input. r259037: Fix the pin value reading on AM335x. Because of the inverted logic it was always returning '0' for all the reads, even for the outputs. It is now known to work with gpioiic(4) and gpioled(4). r261842: Add an OFW GPIO compatible bus. This allows the use of the DTS files to describe GPIO bindings in the system. Move the GPIOBUS lock macros to gpiobusvar.h as they are now shared between the OFW and the non OFW versions of GPIO bus. Export gpiobus_print_pins() so it can also be used on the OFW GPIO bus. r261843: Add OFW support to the in tree gpio compatible devices: gpioiic(4) and gpioled(4). Tested on RPi and BBB (using the hardware I2C controller and gpioiic(4) for the I2C tests). It was also verified for regressions on RSPRO (MIPS/ar71xx) used as reference for a non OFW-based system. Update the gpioled(4) and gpioiic(4) man pages with some details and examples about the FDT/OFW support. Some compatibility details pointed out by imp@ will follow in subsequent commits. r261844: Allow the use of OFW I2C bus together with iicbb(4) on OFW-based systems. This change makes ofw_iicbus attach to iicbb(4) controllers in addition to the already supported i2c host bridges (iichb). On iicbb(4) allow the direct access of the OFW parent node by its children, so they can be directly attached to iicbb(4) node on the DTS without the need of describing the i2c bus. r261845: Allow the use of the OFW GPIO bus for ti_gpio and bcm2835_gpio. With this change the gpio children can be described as directly connected to the GPIO controller without the need of describing the OFW GPIO bus itself on the DTS file. With this commit the OFW GPIO bus is fully functional on BBB and RPi. GPIO controllers which want to use the OFW GPIO bus will need similar changes. r261846: Make the gpioled(4) work out of the box on BBB. Add gpioled(4) to BEAGLEBONE kernel and add the description of the four on-board leds of beaglebone-black to its DTS file. r262194: Remove an unnecessary header. r262522: Fix make depend for iicbus. r262559: Inspired by r262522, fix make depend. This fixes the build of gpio modules. diff 266105 Thu May 15 01:44:32 MDT 2014 loos MFC r258046, r258047, r258050, r259035, r259036, r259037, r261842, r261843, r261844, r261845, r261846, r262194, r262522, r262559 r258046: Fix a typo on a comment in ofw_bus_if.m, the default method will return -1 when a node doesn't exist. r258047: Move the KASSERT() check to the point before the increase of number of pins. r258050: Fix gpiobus to return BUS_PROBE_GENERIC insted of BUS_PROBE_SPECIFIC (0) so it can be overriden by its OFW/FDT version. Give a chance for GPIO devices that implement the device_identify method to attach. r259035: Remove unnecessary includes and an unused softc variable. While here apply two minor style(9) fixes. r259036: Move the GPIOBUS_SET_PINFLAGS(..., ..., pin, GPIO_PIN_OUTPUT) to led(4) control callback function. This makes gpioled(4) works even if the pin is accidentally set to an input. r259037: Fix the pin value reading on AM335x. Because of the inverted logic it was always returning '0' for all the reads, even for the outputs. It is now known to work with gpioiic(4) and gpioled(4). r261842: Add an OFW GPIO compatible bus. This allows the use of the DTS files to describe GPIO bindings in the system. Move the GPIOBUS lock macros to gpiobusvar.h as they are now shared between the OFW and the non OFW versions of GPIO bus. Export gpiobus_print_pins() so it can also be used on the OFW GPIO bus. r261843: Add OFW support to the in tree gpio compatible devices: gpioiic(4) and gpioled(4). Tested on RPi and BBB (using the hardware I2C controller and gpioiic(4) for the I2C tests). It was also verified for regressions on RSPRO (MIPS/ar71xx) used as reference for a non OFW-based system. Update the gpioled(4) and gpioiic(4) man pages with some details and examples about the FDT/OFW support. Some compatibility details pointed out by imp@ will follow in subsequent commits. r261844: Allow the use of OFW I2C bus together with iicbb(4) on OFW-based systems. This change makes ofw_iicbus attach to iicbb(4) controllers in addition to the already supported i2c host bridges (iichb). On iicbb(4) allow the direct access of the OFW parent node by its children, so they can be directly attached to iicbb(4) node on the DTS without the need of describing the i2c bus. r261845: Allow the use of the OFW GPIO bus for ti_gpio and bcm2835_gpio. With this change the gpio children can be described as directly connected to the GPIO controller without the need of describing the OFW GPIO bus itself on the DTS file. With this commit the OFW GPIO bus is fully functional on BBB and RPi. GPIO controllers which want to use the OFW GPIO bus will need similar changes. r261846: Make the gpioled(4) work out of the box on BBB. Add gpioled(4) to BEAGLEBONE kernel and add the description of the four on-board leds of beaglebone-black to its DTS file. r262194: Remove an unnecessary header. r262522: Fix make depend for iicbus. r262559: Inspired by r262522, fix make depend. This fixes the build of gpio modules. diff 266105 Thu May 15 01:44:32 MDT 2014 loos MFC r258046, r258047, r258050, r259035, r259036, r259037, r261842, r261843, r261844, r261845, r261846, r262194, r262522, r262559 r258046: Fix a typo on a comment in ofw_bus_if.m, the default method will return -1 when a node doesn't exist. r258047: Move the KASSERT() check to the point before the increase of number of pins. r258050: Fix gpiobus to return BUS_PROBE_GENERIC insted of BUS_PROBE_SPECIFIC (0) so it can be overriden by its OFW/FDT version. Give a chance for GPIO devices that implement the device_identify method to attach. r259035: Remove unnecessary includes and an unused softc variable. While here apply two minor style(9) fixes. r259036: Move the GPIOBUS_SET_PINFLAGS(..., ..., pin, GPIO_PIN_OUTPUT) to led(4) control callback function. This makes gpioled(4) works even if the pin is accidentally set to an input. r259037: Fix the pin value reading on AM335x. Because of the inverted logic it was always returning '0' for all the reads, even for the outputs. It is now known to work with gpioiic(4) and gpioled(4). r261842: Add an OFW GPIO compatible bus. This allows the use of the DTS files to describe GPIO bindings in the system. Move the GPIOBUS lock macros to gpiobusvar.h as they are now shared between the OFW and the non OFW versions of GPIO bus. Export gpiobus_print_pins() so it can also be used on the OFW GPIO bus. r261843: Add OFW support to the in tree gpio compatible devices: gpioiic(4) and gpioled(4). Tested on RPi and BBB (using the hardware I2C controller and gpioiic(4) for the I2C tests). It was also verified for regressions on RSPRO (MIPS/ar71xx) used as reference for a non OFW-based system. Update the gpioled(4) and gpioiic(4) man pages with some details and examples about the FDT/OFW support. Some compatibility details pointed out by imp@ will follow in subsequent commits. r261844: Allow the use of OFW I2C bus together with iicbb(4) on OFW-based systems. This change makes ofw_iicbus attach to iicbb(4) controllers in addition to the already supported i2c host bridges (iichb). On iicbb(4) allow the direct access of the OFW parent node by its children, so they can be directly attached to iicbb(4) node on the DTS without the need of describing the i2c bus. r261845: Allow the use of the OFW GPIO bus for ti_gpio and bcm2835_gpio. With this change the gpio children can be described as directly connected to the GPIO controller without the need of describing the OFW GPIO bus itself on the DTS file. With this commit the OFW GPIO bus is fully functional on BBB and RPi. GPIO controllers which want to use the OFW GPIO bus will need similar changes. r261846: Make the gpioled(4) work out of the box on BBB. Add gpioled(4) to BEAGLEBONE kernel and add the description of the four on-board leds of beaglebone-black to its DTS file. r262194: Remove an unnecessary header. r262522: Fix make depend for iicbus. r262559: Inspired by r262522, fix make depend. This fixes the build of gpio modules. diff 266105 Thu May 15 01:44:32 MDT 2014 loos MFC r258046, r258047, r258050, r259035, r259036, r259037, r261842, r261843, r261844, r261845, r261846, r262194, r262522, r262559 r258046: Fix a typo on a comment in ofw_bus_if.m, the default method will return -1 when a node doesn't exist. r258047: Move the KASSERT() check to the point before the increase of number of pins. r258050: Fix gpiobus to return BUS_PROBE_GENERIC insted of BUS_PROBE_SPECIFIC (0) so it can be overriden by its OFW/FDT version. Give a chance for GPIO devices that implement the device_identify method to attach. r259035: Remove unnecessary includes and an unused softc variable. While here apply two minor style(9) fixes. r259036: Move the GPIOBUS_SET_PINFLAGS(..., ..., pin, GPIO_PIN_OUTPUT) to led(4) control callback function. This makes gpioled(4) works even if the pin is accidentally set to an input. r259037: Fix the pin value reading on AM335x. Because of the inverted logic it was always returning '0' for all the reads, even for the outputs. It is now known to work with gpioiic(4) and gpioled(4). r261842: Add an OFW GPIO compatible bus. This allows the use of the DTS files to describe GPIO bindings in the system. Move the GPIOBUS lock macros to gpiobusvar.h as they are now shared between the OFW and the non OFW versions of GPIO bus. Export gpiobus_print_pins() so it can also be used on the OFW GPIO bus. r261843: Add OFW support to the in tree gpio compatible devices: gpioiic(4) and gpioled(4). Tested on RPi and BBB (using the hardware I2C controller and gpioiic(4) for the I2C tests). It was also verified for regressions on RSPRO (MIPS/ar71xx) used as reference for a non OFW-based system. Update the gpioled(4) and gpioiic(4) man pages with some details and examples about the FDT/OFW support. Some compatibility details pointed out by imp@ will follow in subsequent commits. r261844: Allow the use of OFW I2C bus together with iicbb(4) on OFW-based systems. This change makes ofw_iicbus attach to iicbb(4) controllers in addition to the already supported i2c host bridges (iichb). On iicbb(4) allow the direct access of the OFW parent node by its children, so they can be directly attached to iicbb(4) node on the DTS without the need of describing the i2c bus. r261845: Allow the use of the OFW GPIO bus for ti_gpio and bcm2835_gpio. With this change the gpio children can be described as directly connected to the GPIO controller without the need of describing the OFW GPIO bus itself on the DTS file. With this commit the OFW GPIO bus is fully functional on BBB and RPi. GPIO controllers which want to use the OFW GPIO bus will need similar changes. r261846: Make the gpioled(4) work out of the box on BBB. Add gpioled(4) to BEAGLEBONE kernel and add the description of the four on-board leds of beaglebone-black to its DTS file. r262194: Remove an unnecessary header. r262522: Fix make depend for iicbus. r262559: Inspired by r262522, fix make depend. This fixes the build of gpio modules. |
| /freebsd-10.2-release/sys/dev/ata/chipsets/ | ||
| H A D | ata-cyrix.c | diff 281140 Mon Apr 06 08:26:36 MDT 2015 mav MFC r280393: Reduce priority of ATA/SATA drivers. Legacy ata(4) -> BUS_PROBE_LOW_PRIORITY; more functional ahci(4), siis(4), mvs(4) -> BUS_PROBE_DEFAULT; BUS_PROBE_VENDOR leave for vendor drivers. diff 281140 Mon Apr 06 08:26:36 MDT 2015 mav MFC r280393: Reduce priority of ATA/SATA drivers. Legacy ata(4) -> BUS_PROBE_LOW_PRIORITY; more functional ahci(4), siis(4), mvs(4) -> BUS_PROBE_DEFAULT; BUS_PROBE_VENDOR leave for vendor drivers. diff 281140 Mon Apr 06 08:26:36 MDT 2015 mav MFC r280393: Reduce priority of ATA/SATA drivers. Legacy ata(4) -> BUS_PROBE_LOW_PRIORITY; more functional ahci(4), siis(4), mvs(4) -> BUS_PROBE_DEFAULT; BUS_PROBE_VENDOR leave for vendor drivers. diff 281140 Mon Apr 06 08:26:36 MDT 2015 mav MFC r280393: Reduce priority of ATA/SATA drivers. Legacy ata(4) -> BUS_PROBE_LOW_PRIORITY; more functional ahci(4), siis(4), mvs(4) -> BUS_PROBE_DEFAULT; BUS_PROBE_VENDOR leave for vendor drivers. diff 249213 Sat Apr 06 19:23:37 MDT 2013 marius - With the demise of !ATA_CAM, ATA_STATIC_ID is the only ata(4) related option left but actually consumed by ada(4), so move it to opt_ada.h and get rid of opt_ata.h. - Fix stand-alone build of atacore(4) by adding opt_cam.h. - Use __FBSDID. - Use DEVMETHOD_END. - Use NULL instead of 0 for pointers. diff 249213 Sat Apr 06 19:23:37 MDT 2013 marius - With the demise of !ATA_CAM, ATA_STATIC_ID is the only ata(4) related option left but actually consumed by ada(4), so move it to opt_ada.h and get rid of opt_ata.h. - Fix stand-alone build of atacore(4) by adding opt_cam.h. - Use __FBSDID. - Use DEVMETHOD_END. - Use NULL instead of 0 for pointers. diff 249213 Sat Apr 06 19:23:37 MDT 2013 marius - With the demise of !ATA_CAM, ATA_STATIC_ID is the only ata(4) related option left but actually consumed by ada(4), so move it to opt_ada.h and get rid of opt_ata.h. - Fix stand-alone build of atacore(4) by adding opt_cam.h. - Use __FBSDID. - Use DEVMETHOD_END. - Use NULL instead of 0 for pointers. diff 233282 Wed Mar 21 17:05:06 MDT 2012 marius - First pass at const'ifying ata(4) as appropriate. - Use DEVMETHOD_END. - Use NULL instead of 0 for pointers MFC after: 1 week diff 200171 Sun Dec 06 00:17:22 MST 2009 mav MFp4: Introduce ATA_CAM kernel option, turning ata(4) controller drivers into cam(4) interface modules. When enabled, this options deprecates all ata(4) peripheral drivers (ad, acd, ...) and interfaces and allows cam(4) drivers (ada, cd, ...) and interfaces to be natively used instead. As side effect of this, ata(4) mode setting code was completely rewritten to make controller API more strict and permit above change. While doing this, SATA revision was separated from PATA mode. It allows DMA-incapable SATA devices to operate and makes hw.ata.atapi_dma tunable work again. Also allow ata(4) controller drivers (except some specific or broken ones) to handle larger data transfers. Previous constraint of 64K was artificial and is not really required by PCI ATA BM specification or hardware. Submitted by: nwitehorn (powerpc part) diff 200171 Sun Dec 06 00:17:22 MST 2009 mav MFp4: Introduce ATA_CAM kernel option, turning ata(4) controller drivers into cam(4) interface modules. When enabled, this options deprecates all ata(4) peripheral drivers (ad, acd, ...) and interfaces and allows cam(4) drivers (ada, cd, ...) and interfaces to be natively used instead. As side effect of this, ata(4) mode setting code was completely rewritten to make controller API more strict and permit above change. While doing this, SATA revision was separated from PATA mode. It allows DMA-incapable SATA devices to operate and makes hw.ata.atapi_dma tunable work again. Also allow ata(4) controller drivers (except some specific or broken ones) to handle larger data transfers. Previous constraint of 64K was artificial and is not really required by PCI ATA BM specification or hardware. Submitted by: nwitehorn (powerpc part) diff 200171 Sun Dec 06 00:17:22 MST 2009 mav MFp4: Introduce ATA_CAM kernel option, turning ata(4) controller drivers into cam(4) interface modules. When enabled, this options deprecates all ata(4) peripheral drivers (ad, acd, ...) and interfaces and allows cam(4) drivers (ada, cd, ...) and interfaces to be natively used instead. As side effect of this, ata(4) mode setting code was completely rewritten to make controller API more strict and permit above change. While doing this, SATA revision was separated from PATA mode. It allows DMA-incapable SATA devices to operate and makes hw.ata.atapi_dma tunable work again. Also allow ata(4) controller drivers (except some specific or broken ones) to handle larger data transfers. Previous constraint of 64K was artificial and is not really required by PCI ATA BM specification or hardware. Submitted by: nwitehorn (powerpc part) diff 200171 Sun Dec 06 00:17:22 MST 2009 mav MFp4: Introduce ATA_CAM kernel option, turning ata(4) controller drivers into cam(4) interface modules. When enabled, this options deprecates all ata(4) peripheral drivers (ad, acd, ...) and interfaces and allows cam(4) drivers (ada, cd, ...) and interfaces to be natively used instead. As side effect of this, ata(4) mode setting code was completely rewritten to make controller API more strict and permit above change. While doing this, SATA revision was separated from PATA mode. It allows DMA-incapable SATA devices to operate and makes hw.ata.atapi_dma tunable work again. Also allow ata(4) controller drivers (except some specific or broken ones) to handle larger data transfers. Previous constraint of 64K was artificial and is not really required by PCI ATA BM specification or hardware. Submitted by: nwitehorn (powerpc part) diff 200171 Sun Dec 06 00:17:22 MST 2009 mav MFp4: Introduce ATA_CAM kernel option, turning ata(4) controller drivers into cam(4) interface modules. When enabled, this options deprecates all ata(4) peripheral drivers (ad, acd, ...) and interfaces and allows cam(4) drivers (ada, cd, ...) and interfaces to be natively used instead. As side effect of this, ata(4) mode setting code was completely rewritten to make controller API more strict and permit above change. While doing this, SATA revision was separated from PATA mode. It allows DMA-incapable SATA devices to operate and makes hw.ata.atapi_dma tunable work again. Also allow ata(4) controller drivers (except some specific or broken ones) to handle larger data transfers. Previous constraint of 64K was artificial and is not really required by PCI ATA BM specification or hardware. Submitted by: nwitehorn (powerpc part) diff 200171 Sun Dec 06 00:17:22 MST 2009 mav MFp4: Introduce ATA_CAM kernel option, turning ata(4) controller drivers into cam(4) interface modules. When enabled, this options deprecates all ata(4) peripheral drivers (ad, acd, ...) and interfaces and allows cam(4) drivers (ada, cd, ...) and interfaces to be natively used instead. As side effect of this, ata(4) mode setting code was completely rewritten to make controller API more strict and permit above change. While doing this, SATA revision was separated from PATA mode. It allows DMA-incapable SATA devices to operate and makes hw.ata.atapi_dma tunable work again. Also allow ata(4) controller drivers (except some specific or broken ones) to handle larger data transfers. Previous constraint of 64K was artificial and is not really required by PCI ATA BM specification or hardware. Submitted by: nwitehorn (powerpc part) |
| H A D | ata-jmicron.c | diff 281140 Mon Apr 06 08:26:36 MDT 2015 mav MFC r280393: Reduce priority of ATA/SATA drivers. Legacy ata(4) -> BUS_PROBE_LOW_PRIORITY; more functional ahci(4), siis(4), mvs(4) -> BUS_PROBE_DEFAULT; BUS_PROBE_VENDOR leave for vendor drivers. diff 281140 Mon Apr 06 08:26:36 MDT 2015 mav MFC r280393: Reduce priority of ATA/SATA drivers. Legacy ata(4) -> BUS_PROBE_LOW_PRIORITY; more functional ahci(4), siis(4), mvs(4) -> BUS_PROBE_DEFAULT; BUS_PROBE_VENDOR leave for vendor drivers. diff 281140 Mon Apr 06 08:26:36 MDT 2015 mav MFC r280393: Reduce priority of ATA/SATA drivers. Legacy ata(4) -> BUS_PROBE_LOW_PRIORITY; more functional ahci(4), siis(4), mvs(4) -> BUS_PROBE_DEFAULT; BUS_PROBE_VENDOR leave for vendor drivers. diff 281140 Mon Apr 06 08:26:36 MDT 2015 mav MFC r280393: Reduce priority of ATA/SATA drivers. Legacy ata(4) -> BUS_PROBE_LOW_PRIORITY; more functional ahci(4), siis(4), mvs(4) -> BUS_PROBE_DEFAULT; BUS_PROBE_VENDOR leave for vendor drivers. diff 249213 Sat Apr 06 19:23:37 MDT 2013 marius - With the demise of !ATA_CAM, ATA_STATIC_ID is the only ata(4) related option left but actually consumed by ada(4), so move it to opt_ada.h and get rid of opt_ata.h. - Fix stand-alone build of atacore(4) by adding opt_cam.h. - Use __FBSDID. - Use DEVMETHOD_END. - Use NULL instead of 0 for pointers. diff 249213 Sat Apr 06 19:23:37 MDT 2013 marius - With the demise of !ATA_CAM, ATA_STATIC_ID is the only ata(4) related option left but actually consumed by ada(4), so move it to opt_ada.h and get rid of opt_ata.h. - Fix stand-alone build of atacore(4) by adding opt_cam.h. - Use __FBSDID. - Use DEVMETHOD_END. - Use NULL instead of 0 for pointers. diff 249213 Sat Apr 06 19:23:37 MDT 2013 marius - With the demise of !ATA_CAM, ATA_STATIC_ID is the only ata(4) related option left but actually consumed by ada(4), so move it to opt_ada.h and get rid of opt_ata.h. - Fix stand-alone build of atacore(4) by adding opt_cam.h. - Use __FBSDID. - Use DEVMETHOD_END. - Use NULL instead of 0 for pointers. diff 233282 Wed Mar 21 17:05:06 MDT 2012 marius - First pass at const'ifying ata(4) as appropriate. - Use DEVMETHOD_END. - Use NULL instead of 0 for pointers MFC after: 1 week diff 200171 Sun Dec 06 00:17:22 MST 2009 mav MFp4: Introduce ATA_CAM kernel option, turning ata(4) controller drivers into cam(4) interface modules. When enabled, this options deprecates all ata(4) peripheral drivers (ad, acd, ...) and interfaces and allows cam(4) drivers (ada, cd, ...) and interfaces to be natively used instead. As side effect of this, ata(4) mode setting code was completely rewritten to make controller API more strict and permit above change. While doing this, SATA revision was separated from PATA mode. It allows DMA-incapable SATA devices to operate and makes hw.ata.atapi_dma tunable work again. Also allow ata(4) controller drivers (except some specific or broken ones) to handle larger data transfers. Previous constraint of 64K was artificial and is not really required by PCI ATA BM specification or hardware. Submitted by: nwitehorn (powerpc part) diff 200171 Sun Dec 06 00:17:22 MST 2009 mav MFp4: Introduce ATA_CAM kernel option, turning ata(4) controller drivers into cam(4) interface modules. When enabled, this options deprecates all ata(4) peripheral drivers (ad, acd, ...) and interfaces and allows cam(4) drivers (ada, cd, ...) and interfaces to be natively used instead. As side effect of this, ata(4) mode setting code was completely rewritten to make controller API more strict and permit above change. While doing this, SATA revision was separated from PATA mode. It allows DMA-incapable SATA devices to operate and makes hw.ata.atapi_dma tunable work again. Also allow ata(4) controller drivers (except some specific or broken ones) to handle larger data transfers. Previous constraint of 64K was artificial and is not really required by PCI ATA BM specification or hardware. Submitted by: nwitehorn (powerpc part) diff 200171 Sun Dec 06 00:17:22 MST 2009 mav MFp4: Introduce ATA_CAM kernel option, turning ata(4) controller drivers into cam(4) interface modules. When enabled, this options deprecates all ata(4) peripheral drivers (ad, acd, ...) and interfaces and allows cam(4) drivers (ada, cd, ...) and interfaces to be natively used instead. As side effect of this, ata(4) mode setting code was completely rewritten to make controller API more strict and permit above change. While doing this, SATA revision was separated from PATA mode. It allows DMA-incapable SATA devices to operate and makes hw.ata.atapi_dma tunable work again. Also allow ata(4) controller drivers (except some specific or broken ones) to handle larger data transfers. Previous constraint of 64K was artificial and is not really required by PCI ATA BM specification or hardware. Submitted by: nwitehorn (powerpc part) diff 200171 Sun Dec 06 00:17:22 MST 2009 mav MFp4: Introduce ATA_CAM kernel option, turning ata(4) controller drivers into cam(4) interface modules. When enabled, this options deprecates all ata(4) peripheral drivers (ad, acd, ...) and interfaces and allows cam(4) drivers (ada, cd, ...) and interfaces to be natively used instead. As side effect of this, ata(4) mode setting code was completely rewritten to make controller API more strict and permit above change. While doing this, SATA revision was separated from PATA mode. It allows DMA-incapable SATA devices to operate and makes hw.ata.atapi_dma tunable work again. Also allow ata(4) controller drivers (except some specific or broken ones) to handle larger data transfers. Previous constraint of 64K was artificial and is not really required by PCI ATA BM specification or hardware. Submitted by: nwitehorn (powerpc part) diff 200171 Sun Dec 06 00:17:22 MST 2009 mav MFp4: Introduce ATA_CAM kernel option, turning ata(4) controller drivers into cam(4) interface modules. When enabled, this options deprecates all ata(4) peripheral drivers (ad, acd, ...) and interfaces and allows cam(4) drivers (ada, cd, ...) and interfaces to be natively used instead. As side effect of this, ata(4) mode setting code was completely rewritten to make controller API more strict and permit above change. While doing this, SATA revision was separated from PATA mode. It allows DMA-incapable SATA devices to operate and makes hw.ata.atapi_dma tunable work again. Also allow ata(4) controller drivers (except some specific or broken ones) to handle larger data transfers. Previous constraint of 64K was artificial and is not really required by PCI ATA BM specification or hardware. Submitted by: nwitehorn (powerpc part) diff 200171 Sun Dec 06 00:17:22 MST 2009 mav MFp4: Introduce ATA_CAM kernel option, turning ata(4) controller drivers into cam(4) interface modules. When enabled, this options deprecates all ata(4) peripheral drivers (ad, acd, ...) and interfaces and allows cam(4) drivers (ada, cd, ...) and interfaces to be natively used instead. As side effect of this, ata(4) mode setting code was completely rewritten to make controller API more strict and permit above change. While doing this, SATA revision was separated from PATA mode. It allows DMA-incapable SATA devices to operate and makes hw.ata.atapi_dma tunable work again. Also allow ata(4) controller drivers (except some specific or broken ones) to handle larger data transfers. Previous constraint of 64K was artificial and is not really required by PCI ATA BM specification or hardware. Submitted by: nwitehorn (powerpc part) |
| H A D | ata-national.c | diff 281140 Mon Apr 06 08:26:36 MDT 2015 mav MFC r280393: Reduce priority of ATA/SATA drivers. Legacy ata(4) -> BUS_PROBE_LOW_PRIORITY; more functional ahci(4), siis(4), mvs(4) -> BUS_PROBE_DEFAULT; BUS_PROBE_VENDOR leave for vendor drivers. diff 281140 Mon Apr 06 08:26:36 MDT 2015 mav MFC r280393: Reduce priority of ATA/SATA drivers. Legacy ata(4) -> BUS_PROBE_LOW_PRIORITY; more functional ahci(4), siis(4), mvs(4) -> BUS_PROBE_DEFAULT; BUS_PROBE_VENDOR leave for vendor drivers. diff 281140 Mon Apr 06 08:26:36 MDT 2015 mav MFC r280393: Reduce priority of ATA/SATA drivers. Legacy ata(4) -> BUS_PROBE_LOW_PRIORITY; more functional ahci(4), siis(4), mvs(4) -> BUS_PROBE_DEFAULT; BUS_PROBE_VENDOR leave for vendor drivers. diff 281140 Mon Apr 06 08:26:36 MDT 2015 mav MFC r280393: Reduce priority of ATA/SATA drivers. Legacy ata(4) -> BUS_PROBE_LOW_PRIORITY; more functional ahci(4), siis(4), mvs(4) -> BUS_PROBE_DEFAULT; BUS_PROBE_VENDOR leave for vendor drivers. diff 249213 Sat Apr 06 19:23:37 MDT 2013 marius - With the demise of !ATA_CAM, ATA_STATIC_ID is the only ata(4) related option left but actually consumed by ada(4), so move it to opt_ada.h and get rid of opt_ata.h. - Fix stand-alone build of atacore(4) by adding opt_cam.h. - Use __FBSDID. - Use DEVMETHOD_END. - Use NULL instead of 0 for pointers. diff 249213 Sat Apr 06 19:23:37 MDT 2013 marius - With the demise of !ATA_CAM, ATA_STATIC_ID is the only ata(4) related option left but actually consumed by ada(4), so move it to opt_ada.h and get rid of opt_ata.h. - Fix stand-alone build of atacore(4) by adding opt_cam.h. - Use __FBSDID. - Use DEVMETHOD_END. - Use NULL instead of 0 for pointers. diff 249213 Sat Apr 06 19:23:37 MDT 2013 marius - With the demise of !ATA_CAM, ATA_STATIC_ID is the only ata(4) related option left but actually consumed by ada(4), so move it to opt_ada.h and get rid of opt_ata.h. - Fix stand-alone build of atacore(4) by adding opt_cam.h. - Use __FBSDID. - Use DEVMETHOD_END. - Use NULL instead of 0 for pointers. diff 233282 Wed Mar 21 17:05:06 MDT 2012 marius - First pass at const'ifying ata(4) as appropriate. - Use DEVMETHOD_END. - Use NULL instead of 0 for pointers MFC after: 1 week diff 200171 Sun Dec 06 00:17:22 MST 2009 mav MFp4: Introduce ATA_CAM kernel option, turning ata(4) controller drivers into cam(4) interface modules. When enabled, this options deprecates all ata(4) peripheral drivers (ad, acd, ...) and interfaces and allows cam(4) drivers (ada, cd, ...) and interfaces to be natively used instead. As side effect of this, ata(4) mode setting code was completely rewritten to make controller API more strict and permit above change. While doing this, SATA revision was separated from PATA mode. It allows DMA-incapable SATA devices to operate and makes hw.ata.atapi_dma tunable work again. Also allow ata(4) controller drivers (except some specific or broken ones) to handle larger data transfers. Previous constraint of 64K was artificial and is not really required by PCI ATA BM specification or hardware. Submitted by: nwitehorn (powerpc part) diff 200171 Sun Dec 06 00:17:22 MST 2009 mav MFp4: Introduce ATA_CAM kernel option, turning ata(4) controller drivers into cam(4) interface modules. When enabled, this options deprecates all ata(4) peripheral drivers (ad, acd, ...) and interfaces and allows cam(4) drivers (ada, cd, ...) and interfaces to be natively used instead. As side effect of this, ata(4) mode setting code was completely rewritten to make controller API more strict and permit above change. While doing this, SATA revision was separated from PATA mode. It allows DMA-incapable SATA devices to operate and makes hw.ata.atapi_dma tunable work again. Also allow ata(4) controller drivers (except some specific or broken ones) to handle larger data transfers. Previous constraint of 64K was artificial and is not really required by PCI ATA BM specification or hardware. Submitted by: nwitehorn (powerpc part) diff 200171 Sun Dec 06 00:17:22 MST 2009 mav MFp4: Introduce ATA_CAM kernel option, turning ata(4) controller drivers into cam(4) interface modules. When enabled, this options deprecates all ata(4) peripheral drivers (ad, acd, ...) and interfaces and allows cam(4) drivers (ada, cd, ...) and interfaces to be natively used instead. As side effect of this, ata(4) mode setting code was completely rewritten to make controller API more strict and permit above change. While doing this, SATA revision was separated from PATA mode. It allows DMA-incapable SATA devices to operate and makes hw.ata.atapi_dma tunable work again. Also allow ata(4) controller drivers (except some specific or broken ones) to handle larger data transfers. Previous constraint of 64K was artificial and is not really required by PCI ATA BM specification or hardware. Submitted by: nwitehorn (powerpc part) diff 200171 Sun Dec 06 00:17:22 MST 2009 mav MFp4: Introduce ATA_CAM kernel option, turning ata(4) controller drivers into cam(4) interface modules. When enabled, this options deprecates all ata(4) peripheral drivers (ad, acd, ...) and interfaces and allows cam(4) drivers (ada, cd, ...) and interfaces to be natively used instead. As side effect of this, ata(4) mode setting code was completely rewritten to make controller API more strict and permit above change. While doing this, SATA revision was separated from PATA mode. It allows DMA-incapable SATA devices to operate and makes hw.ata.atapi_dma tunable work again. Also allow ata(4) controller drivers (except some specific or broken ones) to handle larger data transfers. Previous constraint of 64K was artificial and is not really required by PCI ATA BM specification or hardware. Submitted by: nwitehorn (powerpc part) diff 200171 Sun Dec 06 00:17:22 MST 2009 mav MFp4: Introduce ATA_CAM kernel option, turning ata(4) controller drivers into cam(4) interface modules. When enabled, this options deprecates all ata(4) peripheral drivers (ad, acd, ...) and interfaces and allows cam(4) drivers (ada, cd, ...) and interfaces to be natively used instead. As side effect of this, ata(4) mode setting code was completely rewritten to make controller API more strict and permit above change. While doing this, SATA revision was separated from PATA mode. It allows DMA-incapable SATA devices to operate and makes hw.ata.atapi_dma tunable work again. Also allow ata(4) controller drivers (except some specific or broken ones) to handle larger data transfers. Previous constraint of 64K was artificial and is not really required by PCI ATA BM specification or hardware. Submitted by: nwitehorn (powerpc part) diff 200171 Sun Dec 06 00:17:22 MST 2009 mav MFp4: Introduce ATA_CAM kernel option, turning ata(4) controller drivers into cam(4) interface modules. When enabled, this options deprecates all ata(4) peripheral drivers (ad, acd, ...) and interfaces and allows cam(4) drivers (ada, cd, ...) and interfaces to be natively used instead. As side effect of this, ata(4) mode setting code was completely rewritten to make controller API more strict and permit above change. While doing this, SATA revision was separated from PATA mode. It allows DMA-incapable SATA devices to operate and makes hw.ata.atapi_dma tunable work again. Also allow ata(4) controller drivers (except some specific or broken ones) to handle larger data transfers. Previous constraint of 64K was artificial and is not really required by PCI ATA BM specification or hardware. Submitted by: nwitehorn (powerpc part) |
| /freebsd-10.2-release/sys/dev/atkbdc/ | ||
| H A D | atkbdreg.h | diff 222152 Fri May 20 22:37:50 MDT 2011 delphij Add a new knob to atkbd(4) to enable typematic rate detection on boot, which is now disabled by default. The detection is known to cause hangs on boot with some new Lenovo laptops on FreeBSD/amd64. Reported by: gnn Discussed with: jkim MFC after: 3 months diff 147271 Fri Jun 10 20:56:38 MDT 2005 marius - Hook up the new locations of the atkbdc(4), atkbd(4) and psm(4) source files after they were repo-copied to sys/dev/atkbdc. The sources of atkbdc(4) and its children were moved to the new location in preparation for adding an EBus front-end to atkbdc(4) for use on sparc64; i.e. in order to not further scatter them over the whole tree which would have been the result of adding atkbdc_ebus.c in e.g. sys/sparc64/ebus. Another reason for the repo-copies was that some of the sources were misfiled, e.g. sys/isa/atkbd_isa.c wasn't ISA-specific at all but for hanging atkbd(4) off of atkbdc(4) and was renamed to atkbd_atkbdc.c accordingly. Most of sys/isa/psm.c, i.e. expect for its PSMC PNP part, also isn't ISA-specific. - Separate the parts of atkbdc_isa.c which aren't actually ISA-specific but are shareable between different atkbdc(4) bus front-ends into atkbdc_subr.c (repo-copied from atkbdc_isa.c). While here use bus_generic_rl_alloc_resource() and bus_generic_rl_release_resource() respectively in atkbdc_isa.c instead of rolling own versions. - Add sparc64 MD bits to atkbdc(4) and atkbd(4) and an EBus front-end for atkbdc(4). PS/2 controllers and input devices are used on a couple of Sun OEM boards and occur on either the EBus or the ISA bus. Depending on the board it's either the only on-board mean to connect a keyboard and mouse or an alternative to either RS232 or USB devices. - Wrap the PSMC PNP part of psm.c in #ifdef DEV_ISA so it can be compiled without isa(4) (e.g. for EBus-only machines). This ISA-specific part isn't separated into its own source file, yet, as it requires more work than was feasible for 6.0 in order to do it in a clean way. Actually philip@ is working on a rewrite of psm(4) so a more comprehensive clean-up and separation of hardware dependent and independent parts is expected to happen after 6.0. Tested on: i386, sparc64 (AX1105, AXe and AXi boards) Reviewed by: philip diff 147271 Fri Jun 10 20:56:38 MDT 2005 marius - Hook up the new locations of the atkbdc(4), atkbd(4) and psm(4) source files after they were repo-copied to sys/dev/atkbdc. The sources of atkbdc(4) and its children were moved to the new location in preparation for adding an EBus front-end to atkbdc(4) for use on sparc64; i.e. in order to not further scatter them over the whole tree which would have been the result of adding atkbdc_ebus.c in e.g. sys/sparc64/ebus. Another reason for the repo-copies was that some of the sources were misfiled, e.g. sys/isa/atkbd_isa.c wasn't ISA-specific at all but for hanging atkbd(4) off of atkbdc(4) and was renamed to atkbd_atkbdc.c accordingly. Most of sys/isa/psm.c, i.e. expect for its PSMC PNP part, also isn't ISA-specific. - Separate the parts of atkbdc_isa.c which aren't actually ISA-specific but are shareable between different atkbdc(4) bus front-ends into atkbdc_subr.c (repo-copied from atkbdc_isa.c). While here use bus_generic_rl_alloc_resource() and bus_generic_rl_release_resource() respectively in atkbdc_isa.c instead of rolling own versions. - Add sparc64 MD bits to atkbdc(4) and atkbd(4) and an EBus front-end for atkbdc(4). PS/2 controllers and input devices are used on a couple of Sun OEM boards and occur on either the EBus or the ISA bus. Depending on the board it's either the only on-board mean to connect a keyboard and mouse or an alternative to either RS232 or USB devices. - Wrap the PSMC PNP part of psm.c in #ifdef DEV_ISA so it can be compiled without isa(4) (e.g. for EBus-only machines). This ISA-specific part isn't separated into its own source file, yet, as it requires more work than was feasible for 6.0 in order to do it in a clean way. Actually philip@ is working on a rewrite of psm(4) so a more comprehensive clean-up and separation of hardware dependent and independent parts is expected to happen after 6.0. Tested on: i386, sparc64 (AX1105, AXe and AXi boards) Reviewed by: philip diff 147271 Fri Jun 10 20:56:38 MDT 2005 marius - Hook up the new locations of the atkbdc(4), atkbd(4) and psm(4) source files after they were repo-copied to sys/dev/atkbdc. The sources of atkbdc(4) and its children were moved to the new location in preparation for adding an EBus front-end to atkbdc(4) for use on sparc64; i.e. in order to not further scatter them over the whole tree which would have been the result of adding atkbdc_ebus.c in e.g. sys/sparc64/ebus. Another reason for the repo-copies was that some of the sources were misfiled, e.g. sys/isa/atkbd_isa.c wasn't ISA-specific at all but for hanging atkbd(4) off of atkbdc(4) and was renamed to atkbd_atkbdc.c accordingly. Most of sys/isa/psm.c, i.e. expect for its PSMC PNP part, also isn't ISA-specific. - Separate the parts of atkbdc_isa.c which aren't actually ISA-specific but are shareable between different atkbdc(4) bus front-ends into atkbdc_subr.c (repo-copied from atkbdc_isa.c). While here use bus_generic_rl_alloc_resource() and bus_generic_rl_release_resource() respectively in atkbdc_isa.c instead of rolling own versions. - Add sparc64 MD bits to atkbdc(4) and atkbd(4) and an EBus front-end for atkbdc(4). PS/2 controllers and input devices are used on a couple of Sun OEM boards and occur on either the EBus or the ISA bus. Depending on the board it's either the only on-board mean to connect a keyboard and mouse or an alternative to either RS232 or USB devices. - Wrap the PSMC PNP part of psm.c in #ifdef DEV_ISA so it can be compiled without isa(4) (e.g. for EBus-only machines). This ISA-specific part isn't separated into its own source file, yet, as it requires more work than was feasible for 6.0 in order to do it in a clean way. Actually philip@ is working on a rewrite of psm(4) so a more comprehensive clean-up and separation of hardware dependent and independent parts is expected to happen after 6.0. Tested on: i386, sparc64 (AX1105, AXe and AXi boards) Reviewed by: philip diff 147271 Fri Jun 10 20:56:38 MDT 2005 marius - Hook up the new locations of the atkbdc(4), atkbd(4) and psm(4) source files after they were repo-copied to sys/dev/atkbdc. The sources of atkbdc(4) and its children were moved to the new location in preparation for adding an EBus front-end to atkbdc(4) for use on sparc64; i.e. in order to not further scatter them over the whole tree which would have been the result of adding atkbdc_ebus.c in e.g. sys/sparc64/ebus. Another reason for the repo-copies was that some of the sources were misfiled, e.g. sys/isa/atkbd_isa.c wasn't ISA-specific at all but for hanging atkbd(4) off of atkbdc(4) and was renamed to atkbd_atkbdc.c accordingly. Most of sys/isa/psm.c, i.e. expect for its PSMC PNP part, also isn't ISA-specific. - Separate the parts of atkbdc_isa.c which aren't actually ISA-specific but are shareable between different atkbdc(4) bus front-ends into atkbdc_subr.c (repo-copied from atkbdc_isa.c). While here use bus_generic_rl_alloc_resource() and bus_generic_rl_release_resource() respectively in atkbdc_isa.c instead of rolling own versions. - Add sparc64 MD bits to atkbdc(4) and atkbd(4) and an EBus front-end for atkbdc(4). PS/2 controllers and input devices are used on a couple of Sun OEM boards and occur on either the EBus or the ISA bus. Depending on the board it's either the only on-board mean to connect a keyboard and mouse or an alternative to either RS232 or USB devices. - Wrap the PSMC PNP part of psm.c in #ifdef DEV_ISA so it can be compiled without isa(4) (e.g. for EBus-only machines). This ISA-specific part isn't separated into its own source file, yet, as it requires more work than was feasible for 6.0 in order to do it in a clean way. Actually philip@ is working on a rewrite of psm(4) so a more comprehensive clean-up and separation of hardware dependent and independent parts is expected to happen after 6.0. Tested on: i386, sparc64 (AX1105, AXe and AXi boards) Reviewed by: philip diff 147271 Fri Jun 10 20:56:38 MDT 2005 marius - Hook up the new locations of the atkbdc(4), atkbd(4) and psm(4) source files after they were repo-copied to sys/dev/atkbdc. The sources of atkbdc(4) and its children were moved to the new location in preparation for adding an EBus front-end to atkbdc(4) for use on sparc64; i.e. in order to not further scatter them over the whole tree which would have been the result of adding atkbdc_ebus.c in e.g. sys/sparc64/ebus. Another reason for the repo-copies was that some of the sources were misfiled, e.g. sys/isa/atkbd_isa.c wasn't ISA-specific at all but for hanging atkbd(4) off of atkbdc(4) and was renamed to atkbd_atkbdc.c accordingly. Most of sys/isa/psm.c, i.e. expect for its PSMC PNP part, also isn't ISA-specific. - Separate the parts of atkbdc_isa.c which aren't actually ISA-specific but are shareable between different atkbdc(4) bus front-ends into atkbdc_subr.c (repo-copied from atkbdc_isa.c). While here use bus_generic_rl_alloc_resource() and bus_generic_rl_release_resource() respectively in atkbdc_isa.c instead of rolling own versions. - Add sparc64 MD bits to atkbdc(4) and atkbd(4) and an EBus front-end for atkbdc(4). PS/2 controllers and input devices are used on a couple of Sun OEM boards and occur on either the EBus or the ISA bus. Depending on the board it's either the only on-board mean to connect a keyboard and mouse or an alternative to either RS232 or USB devices. - Wrap the PSMC PNP part of psm.c in #ifdef DEV_ISA so it can be compiled without isa(4) (e.g. for EBus-only machines). This ISA-specific part isn't separated into its own source file, yet, as it requires more work than was feasible for 6.0 in order to do it in a clean way. Actually philip@ is working on a rewrite of psm(4) so a more comprehensive clean-up and separation of hardware dependent and independent parts is expected to happen after 6.0. Tested on: i386, sparc64 (AX1105, AXe and AXi boards) Reviewed by: philip diff 147271 Fri Jun 10 20:56:38 MDT 2005 marius - Hook up the new locations of the atkbdc(4), atkbd(4) and psm(4) source files after they were repo-copied to sys/dev/atkbdc. The sources of atkbdc(4) and its children were moved to the new location in preparation for adding an EBus front-end to atkbdc(4) for use on sparc64; i.e. in order to not further scatter them over the whole tree which would have been the result of adding atkbdc_ebus.c in e.g. sys/sparc64/ebus. Another reason for the repo-copies was that some of the sources were misfiled, e.g. sys/isa/atkbd_isa.c wasn't ISA-specific at all but for hanging atkbd(4) off of atkbdc(4) and was renamed to atkbd_atkbdc.c accordingly. Most of sys/isa/psm.c, i.e. expect for its PSMC PNP part, also isn't ISA-specific. - Separate the parts of atkbdc_isa.c which aren't actually ISA-specific but are shareable between different atkbdc(4) bus front-ends into atkbdc_subr.c (repo-copied from atkbdc_isa.c). While here use bus_generic_rl_alloc_resource() and bus_generic_rl_release_resource() respectively in atkbdc_isa.c instead of rolling own versions. - Add sparc64 MD bits to atkbdc(4) and atkbd(4) and an EBus front-end for atkbdc(4). PS/2 controllers and input devices are used on a couple of Sun OEM boards and occur on either the EBus or the ISA bus. Depending on the board it's either the only on-board mean to connect a keyboard and mouse or an alternative to either RS232 or USB devices. - Wrap the PSMC PNP part of psm.c in #ifdef DEV_ISA so it can be compiled without isa(4) (e.g. for EBus-only machines). This ISA-specific part isn't separated into its own source file, yet, as it requires more work than was feasible for 6.0 in order to do it in a clean way. Actually philip@ is working on a rewrite of psm(4) so a more comprehensive clean-up and separation of hardware dependent and independent parts is expected to happen after 6.0. Tested on: i386, sparc64 (AX1105, AXe and AXi boards) Reviewed by: philip diff 147271 Fri Jun 10 20:56:38 MDT 2005 marius - Hook up the new locations of the atkbdc(4), atkbd(4) and psm(4) source files after they were repo-copied to sys/dev/atkbdc. The sources of atkbdc(4) and its children were moved to the new location in preparation for adding an EBus front-end to atkbdc(4) for use on sparc64; i.e. in order to not further scatter them over the whole tree which would have been the result of adding atkbdc_ebus.c in e.g. sys/sparc64/ebus. Another reason for the repo-copies was that some of the sources were misfiled, e.g. sys/isa/atkbd_isa.c wasn't ISA-specific at all but for hanging atkbd(4) off of atkbdc(4) and was renamed to atkbd_atkbdc.c accordingly. Most of sys/isa/psm.c, i.e. expect for its PSMC PNP part, also isn't ISA-specific. - Separate the parts of atkbdc_isa.c which aren't actually ISA-specific but are shareable between different atkbdc(4) bus front-ends into atkbdc_subr.c (repo-copied from atkbdc_isa.c). While here use bus_generic_rl_alloc_resource() and bus_generic_rl_release_resource() respectively in atkbdc_isa.c instead of rolling own versions. - Add sparc64 MD bits to atkbdc(4) and atkbd(4) and an EBus front-end for atkbdc(4). PS/2 controllers and input devices are used on a couple of Sun OEM boards and occur on either the EBus or the ISA bus. Depending on the board it's either the only on-board mean to connect a keyboard and mouse or an alternative to either RS232 or USB devices. - Wrap the PSMC PNP part of psm.c in #ifdef DEV_ISA so it can be compiled without isa(4) (e.g. for EBus-only machines). This ISA-specific part isn't separated into its own source file, yet, as it requires more work than was feasible for 6.0 in order to do it in a clean way. Actually philip@ is working on a rewrite of psm(4) so a more comprehensive clean-up and separation of hardware dependent and independent parts is expected to happen after 6.0. Tested on: i386, sparc64 (AX1105, AXe and AXi boards) Reviewed by: philip diff 147271 Fri Jun 10 20:56:38 MDT 2005 marius - Hook up the new locations of the atkbdc(4), atkbd(4) and psm(4) source files after they were repo-copied to sys/dev/atkbdc. The sources of atkbdc(4) and its children were moved to the new location in preparation for adding an EBus front-end to atkbdc(4) for use on sparc64; i.e. in order to not further scatter them over the whole tree which would have been the result of adding atkbdc_ebus.c in e.g. sys/sparc64/ebus. Another reason for the repo-copies was that some of the sources were misfiled, e.g. sys/isa/atkbd_isa.c wasn't ISA-specific at all but for hanging atkbd(4) off of atkbdc(4) and was renamed to atkbd_atkbdc.c accordingly. Most of sys/isa/psm.c, i.e. expect for its PSMC PNP part, also isn't ISA-specific. - Separate the parts of atkbdc_isa.c which aren't actually ISA-specific but are shareable between different atkbdc(4) bus front-ends into atkbdc_subr.c (repo-copied from atkbdc_isa.c). While here use bus_generic_rl_alloc_resource() and bus_generic_rl_release_resource() respectively in atkbdc_isa.c instead of rolling own versions. - Add sparc64 MD bits to atkbdc(4) and atkbd(4) and an EBus front-end for atkbdc(4). PS/2 controllers and input devices are used on a couple of Sun OEM boards and occur on either the EBus or the ISA bus. Depending on the board it's either the only on-board mean to connect a keyboard and mouse or an alternative to either RS232 or USB devices. - Wrap the PSMC PNP part of psm.c in #ifdef DEV_ISA so it can be compiled without isa(4) (e.g. for EBus-only machines). This ISA-specific part isn't separated into its own source file, yet, as it requires more work than was feasible for 6.0 in order to do it in a clean way. Actually philip@ is working on a rewrite of psm(4) so a more comprehensive clean-up and separation of hardware dependent and independent parts is expected to happen after 6.0. Tested on: i386, sparc64 (AX1105, AXe and AXi boards) Reviewed by: philip diff 147271 Fri Jun 10 20:56:38 MDT 2005 marius - Hook up the new locations of the atkbdc(4), atkbd(4) and psm(4) source files after they were repo-copied to sys/dev/atkbdc. The sources of atkbdc(4) and its children were moved to the new location in preparation for adding an EBus front-end to atkbdc(4) for use on sparc64; i.e. in order to not further scatter them over the whole tree which would have been the result of adding atkbdc_ebus.c in e.g. sys/sparc64/ebus. Another reason for the repo-copies was that some of the sources were misfiled, e.g. sys/isa/atkbd_isa.c wasn't ISA-specific at all but for hanging atkbd(4) off of atkbdc(4) and was renamed to atkbd_atkbdc.c accordingly. Most of sys/isa/psm.c, i.e. expect for its PSMC PNP part, also isn't ISA-specific. - Separate the parts of atkbdc_isa.c which aren't actually ISA-specific but are shareable between different atkbdc(4) bus front-ends into atkbdc_subr.c (repo-copied from atkbdc_isa.c). While here use bus_generic_rl_alloc_resource() and bus_generic_rl_release_resource() respectively in atkbdc_isa.c instead of rolling own versions. - Add sparc64 MD bits to atkbdc(4) and atkbd(4) and an EBus front-end for atkbdc(4). PS/2 controllers and input devices are used on a couple of Sun OEM boards and occur on either the EBus or the ISA bus. Depending on the board it's either the only on-board mean to connect a keyboard and mouse or an alternative to either RS232 or USB devices. - Wrap the PSMC PNP part of psm.c in #ifdef DEV_ISA so it can be compiled without isa(4) (e.g. for EBus-only machines). This ISA-specific part isn't separated into its own source file, yet, as it requires more work than was feasible for 6.0 in order to do it in a clean way. Actually philip@ is working on a rewrite of psm(4) so a more comprehensive clean-up and separation of hardware dependent and independent parts is expected to happen after 6.0. Tested on: i386, sparc64 (AX1105, AXe and AXi boards) Reviewed by: philip diff 147271 Fri Jun 10 20:56:38 MDT 2005 marius - Hook up the new locations of the atkbdc(4), atkbd(4) and psm(4) source files after they were repo-copied to sys/dev/atkbdc. The sources of atkbdc(4) and its children were moved to the new location in preparation for adding an EBus front-end to atkbdc(4) for use on sparc64; i.e. in order to not further scatter them over the whole tree which would have been the result of adding atkbdc_ebus.c in e.g. sys/sparc64/ebus. Another reason for the repo-copies was that some of the sources were misfiled, e.g. sys/isa/atkbd_isa.c wasn't ISA-specific at all but for hanging atkbd(4) off of atkbdc(4) and was renamed to atkbd_atkbdc.c accordingly. Most of sys/isa/psm.c, i.e. expect for its PSMC PNP part, also isn't ISA-specific. - Separate the parts of atkbdc_isa.c which aren't actually ISA-specific but are shareable between different atkbdc(4) bus front-ends into atkbdc_subr.c (repo-copied from atkbdc_isa.c). While here use bus_generic_rl_alloc_resource() and bus_generic_rl_release_resource() respectively in atkbdc_isa.c instead of rolling own versions. - Add sparc64 MD bits to atkbdc(4) and atkbd(4) and an EBus front-end for atkbdc(4). PS/2 controllers and input devices are used on a couple of Sun OEM boards and occur on either the EBus or the ISA bus. Depending on the board it's either the only on-board mean to connect a keyboard and mouse or an alternative to either RS232 or USB devices. - Wrap the PSMC PNP part of psm.c in #ifdef DEV_ISA so it can be compiled without isa(4) (e.g. for EBus-only machines). This ISA-specific part isn't separated into its own source file, yet, as it requires more work than was feasible for 6.0 in order to do it in a clean way. Actually philip@ is working on a rewrite of psm(4) so a more comprehensive clean-up and separation of hardware dependent and independent parts is expected to happen after 6.0. Tested on: i386, sparc64 (AX1105, AXe and AXi boards) Reviewed by: philip diff 147271 Fri Jun 10 20:56:38 MDT 2005 marius - Hook up the new locations of the atkbdc(4), atkbd(4) and psm(4) source files after they were repo-copied to sys/dev/atkbdc. The sources of atkbdc(4) and its children were moved to the new location in preparation for adding an EBus front-end to atkbdc(4) for use on sparc64; i.e. in order to not further scatter them over the whole tree which would have been the result of adding atkbdc_ebus.c in e.g. sys/sparc64/ebus. Another reason for the repo-copies was that some of the sources were misfiled, e.g. sys/isa/atkbd_isa.c wasn't ISA-specific at all but for hanging atkbd(4) off of atkbdc(4) and was renamed to atkbd_atkbdc.c accordingly. Most of sys/isa/psm.c, i.e. expect for its PSMC PNP part, also isn't ISA-specific. - Separate the parts of atkbdc_isa.c which aren't actually ISA-specific but are shareable between different atkbdc(4) bus front-ends into atkbdc_subr.c (repo-copied from atkbdc_isa.c). While here use bus_generic_rl_alloc_resource() and bus_generic_rl_release_resource() respectively in atkbdc_isa.c instead of rolling own versions. - Add sparc64 MD bits to atkbdc(4) and atkbd(4) and an EBus front-end for atkbdc(4). PS/2 controllers and input devices are used on a couple of Sun OEM boards and occur on either the EBus or the ISA bus. Depending on the board it's either the only on-board mean to connect a keyboard and mouse or an alternative to either RS232 or USB devices. - Wrap the PSMC PNP part of psm.c in #ifdef DEV_ISA so it can be compiled without isa(4) (e.g. for EBus-only machines). This ISA-specific part isn't separated into its own source file, yet, as it requires more work than was feasible for 6.0 in order to do it in a clean way. Actually philip@ is working on a rewrite of psm(4) so a more comprehensive clean-up and separation of hardware dependent and independent parts is expected to happen after 6.0. Tested on: i386, sparc64 (AX1105, AXe and AXi boards) Reviewed by: philip diff 147271 Fri Jun 10 20:56:38 MDT 2005 marius - Hook up the new locations of the atkbdc(4), atkbd(4) and psm(4) source files after they were repo-copied to sys/dev/atkbdc. The sources of atkbdc(4) and its children were moved to the new location in preparation for adding an EBus front-end to atkbdc(4) for use on sparc64; i.e. in order to not further scatter them over the whole tree which would have been the result of adding atkbdc_ebus.c in e.g. sys/sparc64/ebus. Another reason for the repo-copies was that some of the sources were misfiled, e.g. sys/isa/atkbd_isa.c wasn't ISA-specific at all but for hanging atkbd(4) off of atkbdc(4) and was renamed to atkbd_atkbdc.c accordingly. Most of sys/isa/psm.c, i.e. expect for its PSMC PNP part, also isn't ISA-specific. - Separate the parts of atkbdc_isa.c which aren't actually ISA-specific but are shareable between different atkbdc(4) bus front-ends into atkbdc_subr.c (repo-copied from atkbdc_isa.c). While here use bus_generic_rl_alloc_resource() and bus_generic_rl_release_resource() respectively in atkbdc_isa.c instead of rolling own versions. - Add sparc64 MD bits to atkbdc(4) and atkbd(4) and an EBus front-end for atkbdc(4). PS/2 controllers and input devices are used on a couple of Sun OEM boards and occur on either the EBus or the ISA bus. Depending on the board it's either the only on-board mean to connect a keyboard and mouse or an alternative to either RS232 or USB devices. - Wrap the PSMC PNP part of psm.c in #ifdef DEV_ISA so it can be compiled without isa(4) (e.g. for EBus-only machines). This ISA-specific part isn't separated into its own source file, yet, as it requires more work than was feasible for 6.0 in order to do it in a clean way. Actually philip@ is working on a rewrite of psm(4) so a more comprehensive clean-up and separation of hardware dependent and independent parts is expected to happen after 6.0. Tested on: i386, sparc64 (AX1105, AXe and AXi boards) Reviewed by: philip diff 147271 Fri Jun 10 20:56:38 MDT 2005 marius - Hook up the new locations of the atkbdc(4), atkbd(4) and psm(4) source files after they were repo-copied to sys/dev/atkbdc. The sources of atkbdc(4) and its children were moved to the new location in preparation for adding an EBus front-end to atkbdc(4) for use on sparc64; i.e. in order to not further scatter them over the whole tree which would have been the result of adding atkbdc_ebus.c in e.g. sys/sparc64/ebus. Another reason for the repo-copies was that some of the sources were misfiled, e.g. sys/isa/atkbd_isa.c wasn't ISA-specific at all but for hanging atkbd(4) off of atkbdc(4) and was renamed to atkbd_atkbdc.c accordingly. Most of sys/isa/psm.c, i.e. expect for its PSMC PNP part, also isn't ISA-specific. - Separate the parts of atkbdc_isa.c which aren't actually ISA-specific but are shareable between different atkbdc(4) bus front-ends into atkbdc_subr.c (repo-copied from atkbdc_isa.c). While here use bus_generic_rl_alloc_resource() and bus_generic_rl_release_resource() respectively in atkbdc_isa.c instead of rolling own versions. - Add sparc64 MD bits to atkbdc(4) and atkbd(4) and an EBus front-end for atkbdc(4). PS/2 controllers and input devices are used on a couple of Sun OEM boards and occur on either the EBus or the ISA bus. Depending on the board it's either the only on-board mean to connect a keyboard and mouse or an alternative to either RS232 or USB devices. - Wrap the PSMC PNP part of psm.c in #ifdef DEV_ISA so it can be compiled without isa(4) (e.g. for EBus-only machines). This ISA-specific part isn't separated into its own source file, yet, as it requires more work than was feasible for 6.0 in order to do it in a clean way. Actually philip@ is working on a rewrite of psm(4) so a more comprehensive clean-up and separation of hardware dependent and independent parts is expected to happen after 6.0. Tested on: i386, sparc64 (AX1105, AXe and AXi boards) Reviewed by: philip |
Completed in 884 milliseconds