Searched hist:293575 (Results 1 - 20 of 20) sorted by relevance

/freebsd-10.3-release/sys/compat/linux/
H A Dlinux.cdiff 293575 Sat Jan 09 17:30:39 MST 2016 dchagin MFC r283474:

Rework signal code to allow using it by other modules, like linprocfs:

1. Linux sigset always 64 bit on all platforms. In order to move Linux
sigset code to the linux_common module define it as 64 bit int. Move
Linux sigset manipulation routines to the MI path.

2. Move Linux signal number definitions to the MI path. In general, they
are the same on all platforms except for a few signals.

3. Map Linux RT signals to the FreeBSD RT signals and hide signal conversion
tables to avoid conversion errors.

4. Emulate Linux SIGPWR signal via FreeBSD SIGRTMIN signal which is outside
of allowed on Linux signal numbers.

PR: 197216
H A Dlinux.hdiff 293575 Sat Jan 09 17:30:39 MST 2016 dchagin MFC r283474:

Rework signal code to allow using it by other modules, like linprocfs:

1. Linux sigset always 64 bit on all platforms. In order to move Linux
sigset code to the linux_common module define it as 64 bit int. Move
Linux sigset manipulation routines to the MI path.

2. Move Linux signal number definitions to the MI path. In general, they
are the same on all platforms except for a few signals.

3. Map Linux RT signals to the FreeBSD RT signals and hide signal conversion
tables to avoid conversion errors.

4. Emulate Linux SIGPWR signal via FreeBSD SIGRTMIN signal which is outside
of allowed on Linux signal numbers.

PR: 197216
H A Dlinux_fork.cdiff 293575 Sat Jan 09 17:30:39 MST 2016 dchagin MFC r283474:

Rework signal code to allow using it by other modules, like linprocfs:

1. Linux sigset always 64 bit on all platforms. In order to move Linux
sigset code to the linux_common module define it as 64 bit int. Move
Linux sigset manipulation routines to the MI path.

2. Move Linux signal number definitions to the MI path. In general, they
are the same on all platforms except for a few signals.

3. Map Linux RT signals to the FreeBSD RT signals and hide signal conversion
tables to avoid conversion errors.

4. Emulate Linux SIGPWR signal via FreeBSD SIGRTMIN signal which is outside
of allowed on Linux signal numbers.

PR: 197216
H A Dlinux_signal.hdiff 293575 Sat Jan 09 17:30:39 MST 2016 dchagin MFC r283474:

Rework signal code to allow using it by other modules, like linprocfs:

1. Linux sigset always 64 bit on all platforms. In order to move Linux
sigset code to the linux_common module define it as 64 bit int. Move
Linux sigset manipulation routines to the MI path.

2. Move Linux signal number definitions to the MI path. In general, they
are the same on all platforms except for a few signals.

3. Map Linux RT signals to the FreeBSD RT signals and hide signal conversion
tables to avoid conversion errors.

4. Emulate Linux SIGPWR signal via FreeBSD SIGRTMIN signal which is outside
of allowed on Linux signal numbers.

PR: 197216
H A Dlinux_signal.cdiff 293575 Sat Jan 09 17:30:39 MST 2016 dchagin MFC r283474:

Rework signal code to allow using it by other modules, like linprocfs:

1. Linux sigset always 64 bit on all platforms. In order to move Linux
sigset code to the linux_common module define it as 64 bit int. Move
Linux sigset manipulation routines to the MI path.

2. Move Linux signal number definitions to the MI path. In general, they
are the same on all platforms except for a few signals.

3. Map Linux RT signals to the FreeBSD RT signals and hide signal conversion
tables to avoid conversion errors.

4. Emulate Linux SIGPWR signal via FreeBSD SIGRTMIN signal which is outside
of allowed on Linux signal numbers.

PR: 197216
H A Dlinux_misc.cdiff 293575 Sat Jan 09 17:30:39 MST 2016 dchagin MFC r283474:

Rework signal code to allow using it by other modules, like linprocfs:

1. Linux sigset always 64 bit on all platforms. In order to move Linux
sigset code to the linux_common module define it as 64 bit int. Move
Linux sigset manipulation routines to the MI path.

2. Move Linux signal number definitions to the MI path. In general, they
are the same on all platforms except for a few signals.

3. Map Linux RT signals to the FreeBSD RT signals and hide signal conversion
tables to avoid conversion errors.

4. Emulate Linux SIGPWR signal via FreeBSD SIGRTMIN signal which is outside
of allowed on Linux signal numbers.

PR: 197216
/freebsd-10.3-release/sys/amd64/linux/
H A Dlinux_machdep.cdiff 293575 Sat Jan 09 17:30:39 MST 2016 dchagin MFC r283474:

Rework signal code to allow using it by other modules, like linprocfs:

1. Linux sigset always 64 bit on all platforms. In order to move Linux
sigset code to the linux_common module define it as 64 bit int. Move
Linux sigset manipulation routines to the MI path.

2. Move Linux signal number definitions to the MI path. In general, they
are the same on all platforms except for a few signals.

3. Map Linux RT signals to the FreeBSD RT signals and hide signal conversion
tables to avoid conversion errors.

4. Emulate Linux SIGPWR signal via FreeBSD SIGRTMIN signal which is outside
of allowed on Linux signal numbers.

PR: 197216
H A Dlinux_sysvec.cdiff 293575 Sat Jan 09 17:30:39 MST 2016 dchagin MFC r283474:

Rework signal code to allow using it by other modules, like linprocfs:

1. Linux sigset always 64 bit on all platforms. In order to move Linux
sigset code to the linux_common module define it as 64 bit int. Move
Linux sigset manipulation routines to the MI path.

2. Move Linux signal number definitions to the MI path. In general, they
are the same on all platforms except for a few signals.

3. Map Linux RT signals to the FreeBSD RT signals and hide signal conversion
tables to avoid conversion errors.

4. Emulate Linux SIGPWR signal via FreeBSD SIGRTMIN signal which is outside
of allowed on Linux signal numbers.

PR: 197216
H A Dlinux.hdiff 293575 Sat Jan 09 17:30:39 MST 2016 dchagin MFC r283474:

Rework signal code to allow using it by other modules, like linprocfs:

1. Linux sigset always 64 bit on all platforms. In order to move Linux
sigset code to the linux_common module define it as 64 bit int. Move
Linux sigset manipulation routines to the MI path.

2. Move Linux signal number definitions to the MI path. In general, they
are the same on all platforms except for a few signals.

3. Map Linux RT signals to the FreeBSD RT signals and hide signal conversion
tables to avoid conversion errors.

4. Emulate Linux SIGPWR signal via FreeBSD SIGRTMIN signal which is outside
of allowed on Linux signal numbers.

PR: 197216
/freebsd-10.3-release/sys/modules/linux_common/
H A DMakefilediff 293575 Sat Jan 09 17:30:39 MST 2016 dchagin MFC r283474:

Rework signal code to allow using it by other modules, like linprocfs:

1. Linux sigset always 64 bit on all platforms. In order to move Linux
sigset code to the linux_common module define it as 64 bit int. Move
Linux sigset manipulation routines to the MI path.

2. Move Linux signal number definitions to the MI path. In general, they
are the same on all platforms except for a few signals.

3. Map Linux RT signals to the FreeBSD RT signals and hide signal conversion
tables to avoid conversion errors.

4. Emulate Linux SIGPWR signal via FreeBSD SIGRTMIN signal which is outside
of allowed on Linux signal numbers.

PR: 197216
/freebsd-10.3-release/sys/i386/linux/
H A Dlinux_ptrace.cdiff 293575 Sat Jan 09 17:30:39 MST 2016 dchagin MFC r283474:

Rework signal code to allow using it by other modules, like linprocfs:

1. Linux sigset always 64 bit on all platforms. In order to move Linux
sigset code to the linux_common module define it as 64 bit int. Move
Linux sigset manipulation routines to the MI path.

2. Move Linux signal number definitions to the MI path. In general, they
are the same on all platforms except for a few signals.

3. Map Linux RT signals to the FreeBSD RT signals and hide signal conversion
tables to avoid conversion errors.

4. Emulate Linux SIGPWR signal via FreeBSD SIGRTMIN signal which is outside
of allowed on Linux signal numbers.

PR: 197216
H A Dlinux.hdiff 293575 Sat Jan 09 17:30:39 MST 2016 dchagin MFC r283474:

Rework signal code to allow using it by other modules, like linprocfs:

1. Linux sigset always 64 bit on all platforms. In order to move Linux
sigset code to the linux_common module define it as 64 bit int. Move
Linux sigset manipulation routines to the MI path.

2. Move Linux signal number definitions to the MI path. In general, they
are the same on all platforms except for a few signals.

3. Map Linux RT signals to the FreeBSD RT signals and hide signal conversion
tables to avoid conversion errors.

4. Emulate Linux SIGPWR signal via FreeBSD SIGRTMIN signal which is outside
of allowed on Linux signal numbers.

PR: 197216
H A Dlinux_machdep.cdiff 293575 Sat Jan 09 17:30:39 MST 2016 dchagin MFC r283474:

Rework signal code to allow using it by other modules, like linprocfs:

1. Linux sigset always 64 bit on all platforms. In order to move Linux
sigset code to the linux_common module define it as 64 bit int. Move
Linux sigset manipulation routines to the MI path.

2. Move Linux signal number definitions to the MI path. In general, they
are the same on all platforms except for a few signals.

3. Map Linux RT signals to the FreeBSD RT signals and hide signal conversion
tables to avoid conversion errors.

4. Emulate Linux SIGPWR signal via FreeBSD SIGRTMIN signal which is outside
of allowed on Linux signal numbers.

PR: 197216
H A Dlinux_sysvec.cdiff 293575 Sat Jan 09 17:30:39 MST 2016 dchagin MFC r283474:

Rework signal code to allow using it by other modules, like linprocfs:

1. Linux sigset always 64 bit on all platforms. In order to move Linux
sigset code to the linux_common module define it as 64 bit int. Move
Linux sigset manipulation routines to the MI path.

2. Move Linux signal number definitions to the MI path. In general, they
are the same on all platforms except for a few signals.

3. Map Linux RT signals to the FreeBSD RT signals and hide signal conversion
tables to avoid conversion errors.

4. Emulate Linux SIGPWR signal via FreeBSD SIGRTMIN signal which is outside
of allowed on Linux signal numbers.

PR: 197216
/freebsd-10.3-release/sys/amd64/linux32/
H A Dlinux.hdiff 293575 Sat Jan 09 17:30:39 MST 2016 dchagin MFC r283474:

Rework signal code to allow using it by other modules, like linprocfs:

1. Linux sigset always 64 bit on all platforms. In order to move Linux
sigset code to the linux_common module define it as 64 bit int. Move
Linux sigset manipulation routines to the MI path.

2. Move Linux signal number definitions to the MI path. In general, they
are the same on all platforms except for a few signals.

3. Map Linux RT signals to the FreeBSD RT signals and hide signal conversion
tables to avoid conversion errors.

4. Emulate Linux SIGPWR signal via FreeBSD SIGRTMIN signal which is outside
of allowed on Linux signal numbers.

PR: 197216
H A Dlinux32_machdep.cdiff 293575 Sat Jan 09 17:30:39 MST 2016 dchagin MFC r283474:

Rework signal code to allow using it by other modules, like linprocfs:

1. Linux sigset always 64 bit on all platforms. In order to move Linux
sigset code to the linux_common module define it as 64 bit int. Move
Linux sigset manipulation routines to the MI path.

2. Move Linux signal number definitions to the MI path. In general, they
are the same on all platforms except for a few signals.

3. Map Linux RT signals to the FreeBSD RT signals and hide signal conversion
tables to avoid conversion errors.

4. Emulate Linux SIGPWR signal via FreeBSD SIGRTMIN signal which is outside
of allowed on Linux signal numbers.

PR: 197216
H A Dlinux32_sysvec.cdiff 293575 Sat Jan 09 17:30:39 MST 2016 dchagin MFC r283474:

Rework signal code to allow using it by other modules, like linprocfs:

1. Linux sigset always 64 bit on all platforms. In order to move Linux
sigset code to the linux_common module define it as 64 bit int. Move
Linux sigset manipulation routines to the MI path.

2. Move Linux signal number definitions to the MI path. In general, they
are the same on all platforms except for a few signals.

3. Map Linux RT signals to the FreeBSD RT signals and hide signal conversion
tables to avoid conversion errors.

4. Emulate Linux SIGPWR signal via FreeBSD SIGRTMIN signal which is outside
of allowed on Linux signal numbers.

PR: 197216
/freebsd-10.3-release/sys/modules/linux/
H A DMakefilediff 293575 Sat Jan 09 17:30:39 MST 2016 dchagin MFC r283474:

Rework signal code to allow using it by other modules, like linprocfs:

1. Linux sigset always 64 bit on all platforms. In order to move Linux
sigset code to the linux_common module define it as 64 bit int. Move
Linux sigset manipulation routines to the MI path.

2. Move Linux signal number definitions to the MI path. In general, they
are the same on all platforms except for a few signals.

3. Map Linux RT signals to the FreeBSD RT signals and hide signal conversion
tables to avoid conversion errors.

4. Emulate Linux SIGPWR signal via FreeBSD SIGRTMIN signal which is outside
of allowed on Linux signal numbers.

PR: 197216
/freebsd-10.3-release/sys/conf/
H A Dfiles.amd64diff 293575 Sat Jan 09 17:30:39 MST 2016 dchagin MFC r283474:

Rework signal code to allow using it by other modules, like linprocfs:

1. Linux sigset always 64 bit on all platforms. In order to move Linux
sigset code to the linux_common module define it as 64 bit int. Move
Linux sigset manipulation routines to the MI path.

2. Move Linux signal number definitions to the MI path. In general, they
are the same on all platforms except for a few signals.

3. Map Linux RT signals to the FreeBSD RT signals and hide signal conversion
tables to avoid conversion errors.

4. Emulate Linux SIGPWR signal via FreeBSD SIGRTMIN signal which is outside
of allowed on Linux signal numbers.

PR: 197216
H A Dfiles.i386diff 293575 Sat Jan 09 17:30:39 MST 2016 dchagin MFC r283474:

Rework signal code to allow using it by other modules, like linprocfs:

1. Linux sigset always 64 bit on all platforms. In order to move Linux
sigset code to the linux_common module define it as 64 bit int. Move
Linux sigset manipulation routines to the MI path.

2. Move Linux signal number definitions to the MI path. In general, they
are the same on all platforms except for a few signals.

3. Map Linux RT signals to the FreeBSD RT signals and hide signal conversion
tables to avoid conversion errors.

4. Emulate Linux SIGPWR signal via FreeBSD SIGRTMIN signal which is outside
of allowed on Linux signal numbers.

PR: 197216

Completed in 960 milliseconds