Searched hist:287225 (Results 1 - 22 of 22) sorted by relevance
/freebsd-11.0-release/sys/dev/ow/ | ||
H A D | README.txt | 287225 Thu Aug 27 23:48:48 MDT 2015 imp New 1-Wire bus implementation. 1-Wire controller is abstracted, though only gpiobus configured via FDT is supported. Bus enumeration is supported. Devices are created for each device found. 1-Wire temperature controllers are supported, but other drivers could be written. Temperatures are polled and reported via a sysctl. Errors are reported via sysctl counters. Mis-wired bus detection is included for more trouble shooting. See ow(4), owc(4) and ow_temp(4) for details of what's supported and known issues. This has been tested on Raspberry Pi-B, Pi2 and Beagle Bone Black with up to 7 devices. Differential Revision: https://reviews.freebsd.org/D2956 Relnotes: yes MFC after: 2 weeks Reviewed by: loos@ (with many insightful comments) |
H A D | ow.h | 287225 Thu Aug 27 23:48:48 MDT 2015 imp New 1-Wire bus implementation. 1-Wire controller is abstracted, though only gpiobus configured via FDT is supported. Bus enumeration is supported. Devices are created for each device found. 1-Wire temperature controllers are supported, but other drivers could be written. Temperatures are polled and reported via a sysctl. Errors are reported via sysctl counters. Mis-wired bus detection is included for more trouble shooting. See ow(4), owc(4) and ow_temp(4) for details of what's supported and known issues. This has been tested on Raspberry Pi-B, Pi2 and Beagle Bone Black with up to 7 devices. Differential Revision: https://reviews.freebsd.org/D2956 Relnotes: yes MFC after: 2 weeks Reviewed by: loos@ (with many insightful comments) |
H A D | ow_temp.c | 287225 Thu Aug 27 23:48:48 MDT 2015 imp New 1-Wire bus implementation. 1-Wire controller is abstracted, though only gpiobus configured via FDT is supported. Bus enumeration is supported. Devices are created for each device found. 1-Wire temperature controllers are supported, but other drivers could be written. Temperatures are polled and reported via a sysctl. Errors are reported via sysctl counters. Mis-wired bus detection is included for more trouble shooting. See ow(4), owc(4) and ow_temp(4) for details of what's supported and known issues. This has been tested on Raspberry Pi-B, Pi2 and Beagle Bone Black with up to 7 devices. Differential Revision: https://reviews.freebsd.org/D2956 Relnotes: yes MFC after: 2 weeks Reviewed by: loos@ (with many insightful comments) |
H A D | owc_gpiobus.c | 287225 Thu Aug 27 23:48:48 MDT 2015 imp New 1-Wire bus implementation. 1-Wire controller is abstracted, though only gpiobus configured via FDT is supported. Bus enumeration is supported. Devices are created for each device found. 1-Wire temperature controllers are supported, but other drivers could be written. Temperatures are polled and reported via a sysctl. Errors are reported via sysctl counters. Mis-wired bus detection is included for more trouble shooting. See ow(4), owc(4) and ow_temp(4) for details of what's supported and known issues. This has been tested on Raspberry Pi-B, Pi2 and Beagle Bone Black with up to 7 devices. Differential Revision: https://reviews.freebsd.org/D2956 Relnotes: yes MFC after: 2 weeks Reviewed by: loos@ (with many insightful comments) |
H A D | owll.h | 287225 Thu Aug 27 23:48:48 MDT 2015 imp New 1-Wire bus implementation. 1-Wire controller is abstracted, though only gpiobus configured via FDT is supported. Bus enumeration is supported. Devices are created for each device found. 1-Wire temperature controllers are supported, but other drivers could be written. Temperatures are polled and reported via a sysctl. Errors are reported via sysctl counters. Mis-wired bus detection is included for more trouble shooting. See ow(4), owc(4) and ow_temp(4) for details of what's supported and known issues. This has been tested on Raspberry Pi-B, Pi2 and Beagle Bone Black with up to 7 devices. Differential Revision: https://reviews.freebsd.org/D2956 Relnotes: yes MFC after: 2 weeks Reviewed by: loos@ (with many insightful comments) |
H A D | owll_if.m | 287225 Thu Aug 27 23:48:48 MDT 2015 imp New 1-Wire bus implementation. 1-Wire controller is abstracted, though only gpiobus configured via FDT is supported. Bus enumeration is supported. Devices are created for each device found. 1-Wire temperature controllers are supported, but other drivers could be written. Temperatures are polled and reported via a sysctl. Errors are reported via sysctl counters. Mis-wired bus detection is included for more trouble shooting. See ow(4), owc(4) and ow_temp(4) for details of what's supported and known issues. This has been tested on Raspberry Pi-B, Pi2 and Beagle Bone Black with up to 7 devices. Differential Revision: https://reviews.freebsd.org/D2956 Relnotes: yes MFC after: 2 weeks Reviewed by: loos@ (with many insightful comments) |
H A D | own.h | 287225 Thu Aug 27 23:48:48 MDT 2015 imp New 1-Wire bus implementation. 1-Wire controller is abstracted, though only gpiobus configured via FDT is supported. Bus enumeration is supported. Devices are created for each device found. 1-Wire temperature controllers are supported, but other drivers could be written. Temperatures are polled and reported via a sysctl. Errors are reported via sysctl counters. Mis-wired bus detection is included for more trouble shooting. See ow(4), owc(4) and ow_temp(4) for details of what's supported and known issues. This has been tested on Raspberry Pi-B, Pi2 and Beagle Bone Black with up to 7 devices. Differential Revision: https://reviews.freebsd.org/D2956 Relnotes: yes MFC after: 2 weeks Reviewed by: loos@ (with many insightful comments) |
H A D | own_if.m | 287225 Thu Aug 27 23:48:48 MDT 2015 imp New 1-Wire bus implementation. 1-Wire controller is abstracted, though only gpiobus configured via FDT is supported. Bus enumeration is supported. Devices are created for each device found. 1-Wire temperature controllers are supported, but other drivers could be written. Temperatures are polled and reported via a sysctl. Errors are reported via sysctl counters. Mis-wired bus detection is included for more trouble shooting. See ow(4), owc(4) and ow_temp(4) for details of what's supported and known issues. This has been tested on Raspberry Pi-B, Pi2 and Beagle Bone Black with up to 7 devices. Differential Revision: https://reviews.freebsd.org/D2956 Relnotes: yes MFC after: 2 weeks Reviewed by: loos@ (with many insightful comments) |
H A D | ow.c | 287225 Thu Aug 27 23:48:48 MDT 2015 imp New 1-Wire bus implementation. 1-Wire controller is abstracted, though only gpiobus configured via FDT is supported. Bus enumeration is supported. Devices are created for each device found. 1-Wire temperature controllers are supported, but other drivers could be written. Temperatures are polled and reported via a sysctl. Errors are reported via sysctl counters. Mis-wired bus detection is included for more trouble shooting. See ow(4), owc(4) and ow_temp(4) for details of what's supported and known issues. This has been tested on Raspberry Pi-B, Pi2 and Beagle Bone Black with up to 7 devices. Differential Revision: https://reviews.freebsd.org/D2956 Relnotes: yes MFC after: 2 weeks Reviewed by: loos@ (with many insightful comments) |
/freebsd-11.0-release/sys/modules/ow/ | ||
H A D | Makefile | 287225 Thu Aug 27 23:48:48 MDT 2015 imp New 1-Wire bus implementation. 1-Wire controller is abstracted, though only gpiobus configured via FDT is supported. Bus enumeration is supported. Devices are created for each device found. 1-Wire temperature controllers are supported, but other drivers could be written. Temperatures are polled and reported via a sysctl. Errors are reported via sysctl counters. Mis-wired bus detection is included for more trouble shooting. See ow(4), owc(4) and ow_temp(4) for details of what's supported and known issues. This has been tested on Raspberry Pi-B, Pi2 and Beagle Bone Black with up to 7 devices. Differential Revision: https://reviews.freebsd.org/D2956 Relnotes: yes MFC after: 2 weeks Reviewed by: loos@ (with many insightful comments) |
/freebsd-11.0-release/sys/modules/ow/ow/ | ||
H A D | Makefile | 287225 Thu Aug 27 23:48:48 MDT 2015 imp New 1-Wire bus implementation. 1-Wire controller is abstracted, though only gpiobus configured via FDT is supported. Bus enumeration is supported. Devices are created for each device found. 1-Wire temperature controllers are supported, but other drivers could be written. Temperatures are polled and reported via a sysctl. Errors are reported via sysctl counters. Mis-wired bus detection is included for more trouble shooting. See ow(4), owc(4) and ow_temp(4) for details of what's supported and known issues. This has been tested on Raspberry Pi-B, Pi2 and Beagle Bone Black with up to 7 devices. Differential Revision: https://reviews.freebsd.org/D2956 Relnotes: yes MFC after: 2 weeks Reviewed by: loos@ (with many insightful comments) |
/freebsd-11.0-release/sys/modules/ow/ow_temp/ | ||
H A D | Makefile | 287225 Thu Aug 27 23:48:48 MDT 2015 imp New 1-Wire bus implementation. 1-Wire controller is abstracted, though only gpiobus configured via FDT is supported. Bus enumeration is supported. Devices are created for each device found. 1-Wire temperature controllers are supported, but other drivers could be written. Temperatures are polled and reported via a sysctl. Errors are reported via sysctl counters. Mis-wired bus detection is included for more trouble shooting. See ow(4), owc(4) and ow_temp(4) for details of what's supported and known issues. This has been tested on Raspberry Pi-B, Pi2 and Beagle Bone Black with up to 7 devices. Differential Revision: https://reviews.freebsd.org/D2956 Relnotes: yes MFC after: 2 weeks Reviewed by: loos@ (with many insightful comments) |
/freebsd-11.0-release/sys/modules/ow/owc/ | ||
H A D | Makefile | 287225 Thu Aug 27 23:48:48 MDT 2015 imp New 1-Wire bus implementation. 1-Wire controller is abstracted, though only gpiobus configured via FDT is supported. Bus enumeration is supported. Devices are created for each device found. 1-Wire temperature controllers are supported, but other drivers could be written. Temperatures are polled and reported via a sysctl. Errors are reported via sysctl counters. Mis-wired bus detection is included for more trouble shooting. See ow(4), owc(4) and ow_temp(4) for details of what's supported and known issues. This has been tested on Raspberry Pi-B, Pi2 and Beagle Bone Black with up to 7 devices. Differential Revision: https://reviews.freebsd.org/D2956 Relnotes: yes MFC after: 2 weeks Reviewed by: loos@ (with many insightful comments) |
/freebsd-11.0-release/share/man/man4/ | ||
H A D | ow.4 | 287225 Thu Aug 27 23:48:48 MDT 2015 imp New 1-Wire bus implementation. 1-Wire controller is abstracted, though only gpiobus configured via FDT is supported. Bus enumeration is supported. Devices are created for each device found. 1-Wire temperature controllers are supported, but other drivers could be written. Temperatures are polled and reported via a sysctl. Errors are reported via sysctl counters. Mis-wired bus detection is included for more trouble shooting. See ow(4), owc(4) and ow_temp(4) for details of what's supported and known issues. This has been tested on Raspberry Pi-B, Pi2 and Beagle Bone Black with up to 7 devices. Differential Revision: https://reviews.freebsd.org/D2956 Relnotes: yes MFC after: 2 weeks Reviewed by: loos@ (with many insightful comments) |
H A D | ow_temp.4 | 287225 Thu Aug 27 23:48:48 MDT 2015 imp New 1-Wire bus implementation. 1-Wire controller is abstracted, though only gpiobus configured via FDT is supported. Bus enumeration is supported. Devices are created for each device found. 1-Wire temperature controllers are supported, but other drivers could be written. Temperatures are polled and reported via a sysctl. Errors are reported via sysctl counters. Mis-wired bus detection is included for more trouble shooting. See ow(4), owc(4) and ow_temp(4) for details of what's supported and known issues. This has been tested on Raspberry Pi-B, Pi2 and Beagle Bone Black with up to 7 devices. Differential Revision: https://reviews.freebsd.org/D2956 Relnotes: yes MFC after: 2 weeks Reviewed by: loos@ (with many insightful comments) |
H A D | owc.4 | 287225 Thu Aug 27 23:48:48 MDT 2015 imp New 1-Wire bus implementation. 1-Wire controller is abstracted, though only gpiobus configured via FDT is supported. Bus enumeration is supported. Devices are created for each device found. 1-Wire temperature controllers are supported, but other drivers could be written. Temperatures are polled and reported via a sysctl. Errors are reported via sysctl counters. Mis-wired bus detection is included for more trouble shooting. See ow(4), owc(4) and ow_temp(4) for details of what's supported and known issues. This has been tested on Raspberry Pi-B, Pi2 and Beagle Bone Black with up to 7 devices. Differential Revision: https://reviews.freebsd.org/D2956 Relnotes: yes MFC after: 2 weeks Reviewed by: loos@ (with many insightful comments) |
H A D | Makefile | diff 287225 Thu Aug 27 23:48:48 MDT 2015 imp New 1-Wire bus implementation. 1-Wire controller is abstracted, though only gpiobus configured via FDT is supported. Bus enumeration is supported. Devices are created for each device found. 1-Wire temperature controllers are supported, but other drivers could be written. Temperatures are polled and reported via a sysctl. Errors are reported via sysctl counters. Mis-wired bus detection is included for more trouble shooting. See ow(4), owc(4) and ow_temp(4) for details of what's supported and known issues. This has been tested on Raspberry Pi-B, Pi2 and Beagle Bone Black with up to 7 devices. Differential Revision: https://reviews.freebsd.org/D2956 Relnotes: yes MFC after: 2 weeks Reviewed by: loos@ (with many insightful comments) |
/freebsd-11.0-release/share/man/man9/ | ||
H A D | owll.9 | 287225 Thu Aug 27 23:48:48 MDT 2015 imp New 1-Wire bus implementation. 1-Wire controller is abstracted, though only gpiobus configured via FDT is supported. Bus enumeration is supported. Devices are created for each device found. 1-Wire temperature controllers are supported, but other drivers could be written. Temperatures are polled and reported via a sysctl. Errors are reported via sysctl counters. Mis-wired bus detection is included for more trouble shooting. See ow(4), owc(4) and ow_temp(4) for details of what's supported and known issues. This has been tested on Raspberry Pi-B, Pi2 and Beagle Bone Black with up to 7 devices. Differential Revision: https://reviews.freebsd.org/D2956 Relnotes: yes MFC after: 2 weeks Reviewed by: loos@ (with many insightful comments) |
H A D | own.9 | 287225 Thu Aug 27 23:48:48 MDT 2015 imp New 1-Wire bus implementation. 1-Wire controller is abstracted, though only gpiobus configured via FDT is supported. Bus enumeration is supported. Devices are created for each device found. 1-Wire temperature controllers are supported, but other drivers could be written. Temperatures are polled and reported via a sysctl. Errors are reported via sysctl counters. Mis-wired bus detection is included for more trouble shooting. See ow(4), owc(4) and ow_temp(4) for details of what's supported and known issues. This has been tested on Raspberry Pi-B, Pi2 and Beagle Bone Black with up to 7 devices. Differential Revision: https://reviews.freebsd.org/D2956 Relnotes: yes MFC after: 2 weeks Reviewed by: loos@ (with many insightful comments) |
H A D | Makefile | diff 287225 Thu Aug 27 23:48:48 MDT 2015 imp New 1-Wire bus implementation. 1-Wire controller is abstracted, though only gpiobus configured via FDT is supported. Bus enumeration is supported. Devices are created for each device found. 1-Wire temperature controllers are supported, but other drivers could be written. Temperatures are polled and reported via a sysctl. Errors are reported via sysctl counters. Mis-wired bus detection is included for more trouble shooting. See ow(4), owc(4) and ow_temp(4) for details of what's supported and known issues. This has been tested on Raspberry Pi-B, Pi2 and Beagle Bone Black with up to 7 devices. Differential Revision: https://reviews.freebsd.org/D2956 Relnotes: yes MFC after: 2 weeks Reviewed by: loos@ (with many insightful comments) |
/freebsd-11.0-release/sys/modules/ | ||
H A D | Makefile | diff 287225 Thu Aug 27 23:48:48 MDT 2015 imp New 1-Wire bus implementation. 1-Wire controller is abstracted, though only gpiobus configured via FDT is supported. Bus enumeration is supported. Devices are created for each device found. 1-Wire temperature controllers are supported, but other drivers could be written. Temperatures are polled and reported via a sysctl. Errors are reported via sysctl counters. Mis-wired bus detection is included for more trouble shooting. See ow(4), owc(4) and ow_temp(4) for details of what's supported and known issues. This has been tested on Raspberry Pi-B, Pi2 and Beagle Bone Black with up to 7 devices. Differential Revision: https://reviews.freebsd.org/D2956 Relnotes: yes MFC after: 2 weeks Reviewed by: loos@ (with many insightful comments) |
/freebsd-11.0-release/sys/conf/ | ||
H A D | files | diff 287225 Thu Aug 27 23:48:48 MDT 2015 imp New 1-Wire bus implementation. 1-Wire controller is abstracted, though only gpiobus configured via FDT is supported. Bus enumeration is supported. Devices are created for each device found. 1-Wire temperature controllers are supported, but other drivers could be written. Temperatures are polled and reported via a sysctl. Errors are reported via sysctl counters. Mis-wired bus detection is included for more trouble shooting. See ow(4), owc(4) and ow_temp(4) for details of what's supported and known issues. This has been tested on Raspberry Pi-B, Pi2 and Beagle Bone Black with up to 7 devices. Differential Revision: https://reviews.freebsd.org/D2956 Relnotes: yes MFC after: 2 weeks Reviewed by: loos@ (with many insightful comments) |
Completed in 812 milliseconds