Searched hist:254263 (Results 1 - 25 of 62) sorted by relevance
/freebsd-10.2-release/sys/dev/aacraid/ | ||
H A D | aacraid_pci.c | diff 254263 Mon Aug 12 23:41:57 MDT 2013 scottl Update PCI drivers to no longer look at the MEMIO-enabled bit in the PCI command register. The lazy BAR allocation code in FreeBSD sometimes disables this bit when it detects a range conflict, and will re-enable it on demand when a driver allocates the BAR. Thus, the bit is no longer a reliable indication of capability, and should not be checked. This results in the elimination of a lot of code from drivers, and also gives the opportunity to simplify a lot of drivers to use a helper API to set the busmaster enable bit. This changes fixes some recent reports of disk controllers and their associated drives/enclosures disappearing during boot. Submitted by: jhb Reviewed by: jfv, marius, achadd, achim MFC after: 1 day |
/freebsd-10.2-release/sys/dev/sound/pci/ | ||
H A D | hdspe.c | diff 254263 Mon Aug 12 23:41:57 MDT 2013 scottl Update PCI drivers to no longer look at the MEMIO-enabled bit in the PCI command register. The lazy BAR allocation code in FreeBSD sometimes disables this bit when it detects a range conflict, and will re-enable it on demand when a driver allocates the BAR. Thus, the bit is no longer a reliable indication of capability, and should not be checked. This results in the elimination of a lot of code from drivers, and also gives the opportunity to simplify a lot of drivers to use a helper API to set the busmaster enable bit. This changes fixes some recent reports of disk controllers and their associated drives/enclosures disappearing during boot. Submitted by: jhb Reviewed by: jfv, marius, achadd, achim MFC after: 1 day |
H A D | vibes.c | diff 254263 Mon Aug 12 23:41:57 MDT 2013 scottl Update PCI drivers to no longer look at the MEMIO-enabled bit in the PCI command register. The lazy BAR allocation code in FreeBSD sometimes disables this bit when it detects a range conflict, and will re-enable it on demand when a driver allocates the BAR. Thus, the bit is no longer a reliable indication of capability, and should not be checked. This results in the elimination of a lot of code from drivers, and also gives the opportunity to simplify a lot of drivers to use a helper API to set the busmaster enable bit. This changes fixes some recent reports of disk controllers and their associated drives/enclosures disappearing during boot. Submitted by: jhb Reviewed by: jfv, marius, achadd, achim MFC after: 1 day |
H A D | cs4281.c | diff 254263 Mon Aug 12 23:41:57 MDT 2013 scottl Update PCI drivers to no longer look at the MEMIO-enabled bit in the PCI command register. The lazy BAR allocation code in FreeBSD sometimes disables this bit when it detects a range conflict, and will re-enable it on demand when a driver allocates the BAR. Thus, the bit is no longer a reliable indication of capability, and should not be checked. This results in the elimination of a lot of code from drivers, and also gives the opportunity to simplify a lot of drivers to use a helper API to set the busmaster enable bit. This changes fixes some recent reports of disk controllers and their associated drives/enclosures disappearing during boot. Submitted by: jhb Reviewed by: jfv, marius, achadd, achim MFC after: 1 day |
H A D | fm801.c | diff 254263 Mon Aug 12 23:41:57 MDT 2013 scottl Update PCI drivers to no longer look at the MEMIO-enabled bit in the PCI command register. The lazy BAR allocation code in FreeBSD sometimes disables this bit when it detects a range conflict, and will re-enable it on demand when a driver allocates the BAR. Thus, the bit is no longer a reliable indication of capability, and should not be checked. This results in the elimination of a lot of code from drivers, and also gives the opportunity to simplify a lot of drivers to use a helper API to set the busmaster enable bit. This changes fixes some recent reports of disk controllers and their associated drives/enclosures disappearing during boot. Submitted by: jhb Reviewed by: jfv, marius, achadd, achim MFC after: 1 day |
H A D | maestro.c | diff 254263 Mon Aug 12 23:41:57 MDT 2013 scottl Update PCI drivers to no longer look at the MEMIO-enabled bit in the PCI command register. The lazy BAR allocation code in FreeBSD sometimes disables this bit when it detects a range conflict, and will re-enable it on demand when a driver allocates the BAR. Thus, the bit is no longer a reliable indication of capability, and should not be checked. This results in the elimination of a lot of code from drivers, and also gives the opportunity to simplify a lot of drivers to use a helper API to set the busmaster enable bit. This changes fixes some recent reports of disk controllers and their associated drives/enclosures disappearing during boot. Submitted by: jhb Reviewed by: jfv, marius, achadd, achim MFC after: 1 day |
/freebsd-10.2-release/sys/dev/mwl/ | ||
H A D | if_mwl_pci.c | diff 254263 Mon Aug 12 23:41:57 MDT 2013 scottl Update PCI drivers to no longer look at the MEMIO-enabled bit in the PCI command register. The lazy BAR allocation code in FreeBSD sometimes disables this bit when it detects a range conflict, and will re-enable it on demand when a driver allocates the BAR. Thus, the bit is no longer a reliable indication of capability, and should not be checked. This results in the elimination of a lot of code from drivers, and also gives the opportunity to simplify a lot of drivers to use a helper API to set the busmaster enable bit. This changes fixes some recent reports of disk controllers and their associated drives/enclosures disappearing during boot. Submitted by: jhb Reviewed by: jfv, marius, achadd, achim MFC after: 1 day |
/freebsd-10.2-release/sys/dev/pst/ | ||
H A D | pst-pci.c | diff 254263 Mon Aug 12 23:41:57 MDT 2013 scottl Update PCI drivers to no longer look at the MEMIO-enabled bit in the PCI command register. The lazy BAR allocation code in FreeBSD sometimes disables this bit when it detects a range conflict, and will re-enable it on demand when a driver allocates the BAR. Thus, the bit is no longer a reliable indication of capability, and should not be checked. This results in the elimination of a lot of code from drivers, and also gives the opportunity to simplify a lot of drivers to use a helper API to set the busmaster enable bit. This changes fixes some recent reports of disk controllers and their associated drives/enclosures disappearing during boot. Submitted by: jhb Reviewed by: jfv, marius, achadd, achim MFC after: 1 day |
/freebsd-10.2-release/sys/dev/tws/ | ||
H A D | tws.c | diff 254263 Mon Aug 12 23:41:57 MDT 2013 scottl Update PCI drivers to no longer look at the MEMIO-enabled bit in the PCI command register. The lazy BAR allocation code in FreeBSD sometimes disables this bit when it detects a range conflict, and will re-enable it on demand when a driver allocates the BAR. Thus, the bit is no longer a reliable indication of capability, and should not be checked. This results in the elimination of a lot of code from drivers, and also gives the opportunity to simplify a lot of drivers to use a helper API to set the busmaster enable bit. This changes fixes some recent reports of disk controllers and their associated drives/enclosures disappearing during boot. Submitted by: jhb Reviewed by: jfv, marius, achadd, achim MFC after: 1 day |
/freebsd-10.2-release/sys/dev/rp/ | ||
H A D | rp_pci.c | diff 254263 Mon Aug 12 23:41:57 MDT 2013 scottl Update PCI drivers to no longer look at the MEMIO-enabled bit in the PCI command register. The lazy BAR allocation code in FreeBSD sometimes disables this bit when it detects a range conflict, and will re-enable it on demand when a driver allocates the BAR. Thus, the bit is no longer a reliable indication of capability, and should not be checked. This results in the elimination of a lot of code from drivers, and also gives the opportunity to simplify a lot of drivers to use a helper API to set the busmaster enable bit. This changes fixes some recent reports of disk controllers and their associated drives/enclosures disappearing during boot. Submitted by: jhb Reviewed by: jfv, marius, achadd, achim MFC after: 1 day |
/freebsd-10.2-release/sys/dev/buslogic/ | ||
H A D | bt_pci.c | diff 254263 Mon Aug 12 23:41:57 MDT 2013 scottl Update PCI drivers to no longer look at the MEMIO-enabled bit in the PCI command register. The lazy BAR allocation code in FreeBSD sometimes disables this bit when it detects a range conflict, and will re-enable it on demand when a driver allocates the BAR. Thus, the bit is no longer a reliable indication of capability, and should not be checked. This results in the elimination of a lot of code from drivers, and also gives the opportunity to simplify a lot of drivers to use a helper API to set the busmaster enable bit. This changes fixes some recent reports of disk controllers and their associated drives/enclosures disappearing during boot. Submitted by: jhb Reviewed by: jfv, marius, achadd, achim MFC after: 1 day |
/freebsd-10.2-release/sys/dev/advansys/ | ||
H A D | adw_pci.c | diff 254263 Mon Aug 12 23:41:57 MDT 2013 scottl Update PCI drivers to no longer look at the MEMIO-enabled bit in the PCI command register. The lazy BAR allocation code in FreeBSD sometimes disables this bit when it detects a range conflict, and will re-enable it on demand when a driver allocates the BAR. Thus, the bit is no longer a reliable indication of capability, and should not be checked. This results in the elimination of a lot of code from drivers, and also gives the opportunity to simplify a lot of drivers to use a helper API to set the busmaster enable bit. This changes fixes some recent reports of disk controllers and their associated drives/enclosures disappearing during boot. Submitted by: jhb Reviewed by: jfv, marius, achadd, achim MFC after: 1 day |
/freebsd-10.2-release/sys/dev/ips/ | ||
H A D | ips_pci.c | diff 254263 Mon Aug 12 23:41:57 MDT 2013 scottl Update PCI drivers to no longer look at the MEMIO-enabled bit in the PCI command register. The lazy BAR allocation code in FreeBSD sometimes disables this bit when it detects a range conflict, and will re-enable it on demand when a driver allocates the BAR. Thus, the bit is no longer a reliable indication of capability, and should not be checked. This results in the elimination of a lot of code from drivers, and also gives the opportunity to simplify a lot of drivers to use a helper API to set the busmaster enable bit. This changes fixes some recent reports of disk controllers and their associated drives/enclosures disappearing during boot. Submitted by: jhb Reviewed by: jfv, marius, achadd, achim MFC after: 1 day |
/freebsd-10.2-release/sys/dev/wi/ | ||
H A D | if_wi_pci.c | diff 254263 Mon Aug 12 23:41:57 MDT 2013 scottl Update PCI drivers to no longer look at the MEMIO-enabled bit in the PCI command register. The lazy BAR allocation code in FreeBSD sometimes disables this bit when it detects a range conflict, and will re-enable it on demand when a driver allocates the BAR. Thus, the bit is no longer a reliable indication of capability, and should not be checked. This results in the elimination of a lot of code from drivers, and also gives the opportunity to simplify a lot of drivers to use a helper API to set the busmaster enable bit. This changes fixes some recent reports of disk controllers and their associated drives/enclosures disappearing during boot. Submitted by: jhb Reviewed by: jfv, marius, achadd, achim MFC after: 1 day |
/freebsd-10.2-release/sys/dev/fatm/ | ||
H A D | if_fatm.c | diff 254263 Mon Aug 12 23:41:57 MDT 2013 scottl Update PCI drivers to no longer look at the MEMIO-enabled bit in the PCI command register. The lazy BAR allocation code in FreeBSD sometimes disables this bit when it detects a range conflict, and will re-enable it on demand when a driver allocates the BAR. Thus, the bit is no longer a reliable indication of capability, and should not be checked. This results in the elimination of a lot of code from drivers, and also gives the opportunity to simplify a lot of drivers to use a helper API to set the busmaster enable bit. This changes fixes some recent reports of disk controllers and their associated drives/enclosures disappearing during boot. Submitted by: jhb Reviewed by: jfv, marius, achadd, achim MFC after: 1 day |
/freebsd-10.2-release/sys/dev/mps/ | ||
H A D | mps_pci.c | diff 254263 Mon Aug 12 23:41:57 MDT 2013 scottl Update PCI drivers to no longer look at the MEMIO-enabled bit in the PCI command register. The lazy BAR allocation code in FreeBSD sometimes disables this bit when it detects a range conflict, and will re-enable it on demand when a driver allocates the BAR. Thus, the bit is no longer a reliable indication of capability, and should not be checked. This results in the elimination of a lot of code from drivers, and also gives the opportunity to simplify a lot of drivers to use a helper API to set the busmaster enable bit. This changes fixes some recent reports of disk controllers and their associated drives/enclosures disappearing during boot. Submitted by: jhb Reviewed by: jfv, marius, achadd, achim MFC after: 1 day |
/freebsd-10.2-release/sys/dev/dpt/ | ||
H A D | dpt_pci.c | diff 254263 Mon Aug 12 23:41:57 MDT 2013 scottl Update PCI drivers to no longer look at the MEMIO-enabled bit in the PCI command register. The lazy BAR allocation code in FreeBSD sometimes disables this bit when it detects a range conflict, and will re-enable it on demand when a driver allocates the BAR. Thus, the bit is no longer a reliable indication of capability, and should not be checked. This results in the elimination of a lot of code from drivers, and also gives the opportunity to simplify a lot of drivers to use a helper API to set the busmaster enable bit. This changes fixes some recent reports of disk controllers and their associated drives/enclosures disappearing during boot. Submitted by: jhb Reviewed by: jfv, marius, achadd, achim MFC after: 1 day |
/freebsd-10.2-release/sys/dev/hatm/ | ||
H A D | if_hatm.c | diff 254263 Mon Aug 12 23:41:57 MDT 2013 scottl Update PCI drivers to no longer look at the MEMIO-enabled bit in the PCI command register. The lazy BAR allocation code in FreeBSD sometimes disables this bit when it detects a range conflict, and will re-enable it on demand when a driver allocates the BAR. Thus, the bit is no longer a reliable indication of capability, and should not be checked. This results in the elimination of a lot of code from drivers, and also gives the opportunity to simplify a lot of drivers to use a helper API to set the busmaster enable bit. This changes fixes some recent reports of disk controllers and their associated drives/enclosures disappearing during boot. Submitted by: jhb Reviewed by: jfv, marius, achadd, achim MFC after: 1 day |
/freebsd-10.2-release/sys/dev/twa/ | ||
H A D | tw_osl_freebsd.c | diff 254263 Mon Aug 12 23:41:57 MDT 2013 scottl Update PCI drivers to no longer look at the MEMIO-enabled bit in the PCI command register. The lazy BAR allocation code in FreeBSD sometimes disables this bit when it detects a range conflict, and will re-enable it on demand when a driver allocates the BAR. Thus, the bit is no longer a reliable indication of capability, and should not be checked. This results in the elimination of a lot of code from drivers, and also gives the opportunity to simplify a lot of drivers to use a helper API to set the busmaster enable bit. This changes fixes some recent reports of disk controllers and their associated drives/enclosures disappearing during boot. Submitted by: jhb Reviewed by: jfv, marius, achadd, achim MFC after: 1 day |
/freebsd-10.2-release/sys/dev/mfi/ | ||
H A D | mfi_pci.c | diff 254263 Mon Aug 12 23:41:57 MDT 2013 scottl Update PCI drivers to no longer look at the MEMIO-enabled bit in the PCI command register. The lazy BAR allocation code in FreeBSD sometimes disables this bit when it detects a range conflict, and will re-enable it on demand when a driver allocates the BAR. Thus, the bit is no longer a reliable indication of capability, and should not be checked. This results in the elimination of a lot of code from drivers, and also gives the opportunity to simplify a lot of drivers to use a helper API to set the busmaster enable bit. This changes fixes some recent reports of disk controllers and their associated drives/enclosures disappearing during boot. Submitted by: jhb Reviewed by: jfv, marius, achadd, achim MFC after: 1 day |
/freebsd-10.2-release/sys/dev/mn/ | ||
H A D | if_mn.c | diff 254263 Mon Aug 12 23:41:57 MDT 2013 scottl Update PCI drivers to no longer look at the MEMIO-enabled bit in the PCI command register. The lazy BAR allocation code in FreeBSD sometimes disables this bit when it detects a range conflict, and will re-enable it on demand when a driver allocates the BAR. Thus, the bit is no longer a reliable indication of capability, and should not be checked. This results in the elimination of a lot of code from drivers, and also gives the opportunity to simplify a lot of drivers to use a helper API to set the busmaster enable bit. This changes fixes some recent reports of disk controllers and their associated drives/enclosures disappearing during boot. Submitted by: jhb Reviewed by: jfv, marius, achadd, achim MFC after: 1 day |
/freebsd-10.2-release/sys/dev/an/ | ||
H A D | if_an_pci.c | diff 254263 Mon Aug 12 23:41:57 MDT 2013 scottl Update PCI drivers to no longer look at the MEMIO-enabled bit in the PCI command register. The lazy BAR allocation code in FreeBSD sometimes disables this bit when it detects a range conflict, and will re-enable it on demand when a driver allocates the BAR. Thus, the bit is no longer a reliable indication of capability, and should not be checked. This results in the elimination of a lot of code from drivers, and also gives the opportunity to simplify a lot of drivers to use a helper API to set the busmaster enable bit. This changes fixes some recent reports of disk controllers and their associated drives/enclosures disappearing during boot. Submitted by: jhb Reviewed by: jfv, marius, achadd, achim MFC after: 1 day |
/freebsd-10.2-release/sys/dev/pccbb/ | ||
H A D | pccbb_pci.c | diff 254263 Mon Aug 12 23:41:57 MDT 2013 scottl Update PCI drivers to no longer look at the MEMIO-enabled bit in the PCI command register. The lazy BAR allocation code in FreeBSD sometimes disables this bit when it detects a range conflict, and will re-enable it on demand when a driver allocates the BAR. Thus, the bit is no longer a reliable indication of capability, and should not be checked. This results in the elimination of a lot of code from drivers, and also gives the opportunity to simplify a lot of drivers to use a helper API to set the busmaster enable bit. This changes fixes some recent reports of disk controllers and their associated drives/enclosures disappearing during boot. Submitted by: jhb Reviewed by: jfv, marius, achadd, achim MFC after: 1 day |
/freebsd-10.2-release/sys/dev/e1000/ | ||
H A D | if_lem.c | diff 254263 Mon Aug 12 23:41:57 MDT 2013 scottl Update PCI drivers to no longer look at the MEMIO-enabled bit in the PCI command register. The lazy BAR allocation code in FreeBSD sometimes disables this bit when it detects a range conflict, and will re-enable it on demand when a driver allocates the BAR. Thus, the bit is no longer a reliable indication of capability, and should not be checked. This results in the elimination of a lot of code from drivers, and also gives the opportunity to simplify a lot of drivers to use a helper API to set the busmaster enable bit. This changes fixes some recent reports of disk controllers and their associated drives/enclosures disappearing during boot. Submitted by: jhb Reviewed by: jfv, marius, achadd, achim MFC after: 1 day |
/freebsd-10.2-release/sys/dev/firewire/ | ||
H A D | fwohci_pci.c | diff 254263 Mon Aug 12 23:41:57 MDT 2013 scottl Update PCI drivers to no longer look at the MEMIO-enabled bit in the PCI command register. The lazy BAR allocation code in FreeBSD sometimes disables this bit when it detects a range conflict, and will re-enable it on demand when a driver allocates the BAR. Thus, the bit is no longer a reliable indication of capability, and should not be checked. This results in the elimination of a lot of code from drivers, and also gives the opportunity to simplify a lot of drivers to use a helper API to set the busmaster enable bit. This changes fixes some recent reports of disk controllers and their associated drives/enclosures disappearing during boot. Submitted by: jhb Reviewed by: jfv, marius, achadd, achim MFC after: 1 day |
Completed in 480 milliseconds