Searched hist:221474 (Results 1 - 4 of 4) sorted by relevance

/freebsd-10.1-release/sys/dev/cxgbe/
H A Dt4_ioctl.hdiff 221474 Thu May 05 00:13:34 MDT 2011 np T4 packet filtering/steering.

- Enable 5-tuple and every-packet lookup.

- Setup the default filter mode to allow filtering/steering based on IP
protocol, ingress port, inner VLAN ID, IP frag, FCoE, and MPS match
type; all combined together. You can also filter based on MAC index,
Ethernet type, IP TOS/IPv6 Traffic Class, and outer VLAN ID but you'll
have to modify the default filter mode and exclude some of the
match-fields in it.

IPv4 and IPv6 SIP/DIP/SPORT/DPORT are always available in all filter
rules.

- Add driver ioctls to get/set the global filter mode.

- Add driver ioctls to program and delete hardware filters. A couple of
the "switch" actions that rewrite Ethernet and VLAN information and
switch the packet out of another port may not work as the L2 code is not
yet in place. Everything else, including all "drop" and "pass" rules
with RSS or absolute qid, should work.

Obtained from: Chelsio Communications
H A Doffload.hdiff 221474 Thu May 05 00:13:34 MDT 2011 np T4 packet filtering/steering.

- Enable 5-tuple and every-packet lookup.

- Setup the default filter mode to allow filtering/steering based on IP
protocol, ingress port, inner VLAN ID, IP frag, FCoE, and MPS match
type; all combined together. You can also filter based on MAC index,
Ethernet type, IP TOS/IPv6 Traffic Class, and outer VLAN ID but you'll
have to modify the default filter mode and exclude some of the
match-fields in it.

IPv4 and IPv6 SIP/DIP/SPORT/DPORT are always available in all filter
rules.

- Add driver ioctls to get/set the global filter mode.

- Add driver ioctls to program and delete hardware filters. A couple of
the "switch" actions that rewrite Ethernet and VLAN information and
switch the packet out of another port may not work as the L2 code is not
yet in place. Everything else, including all "drop" and "pass" rules
with RSS or absolute qid, should work.

Obtained from: Chelsio Communications
H A Dt4_sge.cdiff 221474 Thu May 05 00:13:34 MDT 2011 np T4 packet filtering/steering.

- Enable 5-tuple and every-packet lookup.

- Setup the default filter mode to allow filtering/steering based on IP
protocol, ingress port, inner VLAN ID, IP frag, FCoE, and MPS match
type; all combined together. You can also filter based on MAC index,
Ethernet type, IP TOS/IPv6 Traffic Class, and outer VLAN ID but you'll
have to modify the default filter mode and exclude some of the
match-fields in it.

IPv4 and IPv6 SIP/DIP/SPORT/DPORT are always available in all filter
rules.

- Add driver ioctls to get/set the global filter mode.

- Add driver ioctls to program and delete hardware filters. A couple of
the "switch" actions that rewrite Ethernet and VLAN information and
switch the packet out of another port may not work as the L2 code is not
yet in place. Everything else, including all "drop" and "pass" rules
with RSS or absolute qid, should work.

Obtained from: Chelsio Communications
H A Dt4_main.cdiff 221474 Thu May 05 00:13:34 MDT 2011 np T4 packet filtering/steering.

- Enable 5-tuple and every-packet lookup.

- Setup the default filter mode to allow filtering/steering based on IP
protocol, ingress port, inner VLAN ID, IP frag, FCoE, and MPS match
type; all combined together. You can also filter based on MAC index,
Ethernet type, IP TOS/IPv6 Traffic Class, and outer VLAN ID but you'll
have to modify the default filter mode and exclude some of the
match-fields in it.

IPv4 and IPv6 SIP/DIP/SPORT/DPORT are always available in all filter
rules.

- Add driver ioctls to get/set the global filter mode.

- Add driver ioctls to program and delete hardware filters. A couple of
the "switch" actions that rewrite Ethernet and VLAN information and
switch the packet out of another port may not work as the L2 code is not
yet in place. Everything else, including all "drop" and "pass" rules
with RSS or absolute qid, should work.

Obtained from: Chelsio Communications

Completed in 202 milliseconds