Searched hist:170031 (Results 1 - 6 of 6) sorted by relevance
/freebsd-10.2-release/sys/dev/sound/pci/ | ||
H A D | spicds.h | diff 170031 Sun May 27 19:58:39 MDT 2007 joel Bring in a bunch of bug fixes and some code to support more chipsets. Neither me nor Ariff have access to any of this hardware, so all tests have been made by Konstantin and Artem. Commit message mostly written by Konstantin. envy24: - Add test code to support rear line-in input on 'Terratec DMX 6fire' audio card. This code is also intended to be used in the future for support of cards, that have I2C-to-GPIO expanders wired between the control line of the audio codec and the Envy24, however such cards are too complex and i can't add that support without hardware sample of such board, i've already tried and failed. envy24ht: - Add support for 'AudioTrak Prodigy HD2'. - Add support for 'AudioTrak Prodigy 7.1 XT'. - Add support for 'ESI Juli@' (Works ok, DAC volume is hard-coded for the time being, so 'mixer vol ...' doesn't work, only 'mixer pcm ...' works). [1] - Fix bug in the init data for M-Audio Revolution 5.1, that results in distorted sound. - Add software volume control (now 'mixer pcm' works, thanks to Ariff). - Add support for more samples rates - 176.4kHz and 192kHz. - Fix problem with the 192kHz samples rate playback when 24.576MHz crystal is used on the board instead of 49.152MHz crystal. spicds: - Add support for Asahi Kasei flagship DAC - AK4396 (used in AudioTrak Prodigy HD2). Submitted by: Konstantin Dimitrov <kosio.dimitrov@gmail.com> Tested by: Artem Antonov [1] Reviewed by: ariff |
H A D | envy24.h | diff 170031 Sun May 27 19:58:39 MDT 2007 joel Bring in a bunch of bug fixes and some code to support more chipsets. Neither me nor Ariff have access to any of this hardware, so all tests have been made by Konstantin and Artem. Commit message mostly written by Konstantin. envy24: - Add test code to support rear line-in input on 'Terratec DMX 6fire' audio card. This code is also intended to be used in the future for support of cards, that have I2C-to-GPIO expanders wired between the control line of the audio codec and the Envy24, however such cards are too complex and i can't add that support without hardware sample of such board, i've already tried and failed. envy24ht: - Add support for 'AudioTrak Prodigy HD2'. - Add support for 'AudioTrak Prodigy 7.1 XT'. - Add support for 'ESI Juli@' (Works ok, DAC volume is hard-coded for the time being, so 'mixer vol ...' doesn't work, only 'mixer pcm ...' works). [1] - Fix bug in the init data for M-Audio Revolution 5.1, that results in distorted sound. - Add software volume control (now 'mixer pcm' works, thanks to Ariff). - Add support for more samples rates - 176.4kHz and 192kHz. - Fix problem with the 192kHz samples rate playback when 24.576MHz crystal is used on the board instead of 49.152MHz crystal. spicds: - Add support for Asahi Kasei flagship DAC - AK4396 (used in AudioTrak Prodigy HD2). Submitted by: Konstantin Dimitrov <kosio.dimitrov@gmail.com> Tested by: Artem Antonov [1] Reviewed by: ariff |
H A D | envy24ht.h | diff 170031 Sun May 27 19:58:39 MDT 2007 joel Bring in a bunch of bug fixes and some code to support more chipsets. Neither me nor Ariff have access to any of this hardware, so all tests have been made by Konstantin and Artem. Commit message mostly written by Konstantin. envy24: - Add test code to support rear line-in input on 'Terratec DMX 6fire' audio card. This code is also intended to be used in the future for support of cards, that have I2C-to-GPIO expanders wired between the control line of the audio codec and the Envy24, however such cards are too complex and i can't add that support without hardware sample of such board, i've already tried and failed. envy24ht: - Add support for 'AudioTrak Prodigy HD2'. - Add support for 'AudioTrak Prodigy 7.1 XT'. - Add support for 'ESI Juli@' (Works ok, DAC volume is hard-coded for the time being, so 'mixer vol ...' doesn't work, only 'mixer pcm ...' works). [1] - Fix bug in the init data for M-Audio Revolution 5.1, that results in distorted sound. - Add software volume control (now 'mixer pcm' works, thanks to Ariff). - Add support for more samples rates - 176.4kHz and 192kHz. - Fix problem with the 192kHz samples rate playback when 24.576MHz crystal is used on the board instead of 49.152MHz crystal. spicds: - Add support for Asahi Kasei flagship DAC - AK4396 (used in AudioTrak Prodigy HD2). Submitted by: Konstantin Dimitrov <kosio.dimitrov@gmail.com> Tested by: Artem Antonov [1] Reviewed by: ariff |
H A D | spicds.c | diff 170031 Sun May 27 19:58:39 MDT 2007 joel Bring in a bunch of bug fixes and some code to support more chipsets. Neither me nor Ariff have access to any of this hardware, so all tests have been made by Konstantin and Artem. Commit message mostly written by Konstantin. envy24: - Add test code to support rear line-in input on 'Terratec DMX 6fire' audio card. This code is also intended to be used in the future for support of cards, that have I2C-to-GPIO expanders wired between the control line of the audio codec and the Envy24, however such cards are too complex and i can't add that support without hardware sample of such board, i've already tried and failed. envy24ht: - Add support for 'AudioTrak Prodigy HD2'. - Add support for 'AudioTrak Prodigy 7.1 XT'. - Add support for 'ESI Juli@' (Works ok, DAC volume is hard-coded for the time being, so 'mixer vol ...' doesn't work, only 'mixer pcm ...' works). [1] - Fix bug in the init data for M-Audio Revolution 5.1, that results in distorted sound. - Add software volume control (now 'mixer pcm' works, thanks to Ariff). - Add support for more samples rates - 176.4kHz and 192kHz. - Fix problem with the 192kHz samples rate playback when 24.576MHz crystal is used on the board instead of 49.152MHz crystal. spicds: - Add support for Asahi Kasei flagship DAC - AK4396 (used in AudioTrak Prodigy HD2). Submitted by: Konstantin Dimitrov <kosio.dimitrov@gmail.com> Tested by: Artem Antonov [1] Reviewed by: ariff |
H A D | envy24.c | diff 170031 Sun May 27 19:58:39 MDT 2007 joel Bring in a bunch of bug fixes and some code to support more chipsets. Neither me nor Ariff have access to any of this hardware, so all tests have been made by Konstantin and Artem. Commit message mostly written by Konstantin. envy24: - Add test code to support rear line-in input on 'Terratec DMX 6fire' audio card. This code is also intended to be used in the future for support of cards, that have I2C-to-GPIO expanders wired between the control line of the audio codec and the Envy24, however such cards are too complex and i can't add that support without hardware sample of such board, i've already tried and failed. envy24ht: - Add support for 'AudioTrak Prodigy HD2'. - Add support for 'AudioTrak Prodigy 7.1 XT'. - Add support for 'ESI Juli@' (Works ok, DAC volume is hard-coded for the time being, so 'mixer vol ...' doesn't work, only 'mixer pcm ...' works). [1] - Fix bug in the init data for M-Audio Revolution 5.1, that results in distorted sound. - Add software volume control (now 'mixer pcm' works, thanks to Ariff). - Add support for more samples rates - 176.4kHz and 192kHz. - Fix problem with the 192kHz samples rate playback when 24.576MHz crystal is used on the board instead of 49.152MHz crystal. spicds: - Add support for Asahi Kasei flagship DAC - AK4396 (used in AudioTrak Prodigy HD2). Submitted by: Konstantin Dimitrov <kosio.dimitrov@gmail.com> Tested by: Artem Antonov [1] Reviewed by: ariff |
H A D | envy24ht.c | diff 170031 Sun May 27 19:58:39 MDT 2007 joel Bring in a bunch of bug fixes and some code to support more chipsets. Neither me nor Ariff have access to any of this hardware, so all tests have been made by Konstantin and Artem. Commit message mostly written by Konstantin. envy24: - Add test code to support rear line-in input on 'Terratec DMX 6fire' audio card. This code is also intended to be used in the future for support of cards, that have I2C-to-GPIO expanders wired between the control line of the audio codec and the Envy24, however such cards are too complex and i can't add that support without hardware sample of such board, i've already tried and failed. envy24ht: - Add support for 'AudioTrak Prodigy HD2'. - Add support for 'AudioTrak Prodigy 7.1 XT'. - Add support for 'ESI Juli@' (Works ok, DAC volume is hard-coded for the time being, so 'mixer vol ...' doesn't work, only 'mixer pcm ...' works). [1] - Fix bug in the init data for M-Audio Revolution 5.1, that results in distorted sound. - Add software volume control (now 'mixer pcm' works, thanks to Ariff). - Add support for more samples rates - 176.4kHz and 192kHz. - Fix problem with the 192kHz samples rate playback when 24.576MHz crystal is used on the board instead of 49.152MHz crystal. spicds: - Add support for Asahi Kasei flagship DAC - AK4396 (used in AudioTrak Prodigy HD2). Submitted by: Konstantin Dimitrov <kosio.dimitrov@gmail.com> Tested by: Artem Antonov [1] Reviewed by: ariff |
Completed in 141 milliseconds