Searched hist:167608 (Results 1 - 20 of 20) sorted by relevance
/freebsd-9.3-release/sys/dev/sound/sbus/ | ||
H A D | cs4231.c | diff 167608 Thu Mar 15 14:41:27 MDT 2007 ariff Fix severe out-of-bound mtx "type" pointer, causing WITNESS refcount confusions and panic provided that the following conditions are met: 1) WITNESS is enabled (watch/trace). 2) Using modules, instead of statically linked (Not a strict requirement, but easier to reproduce this way). 3) 2 or more modules share the same mtx type ("sound softc"). - They might share the same name (strcmp() == 0), but it always point to different address. 4) Repetitive kldunload/load on any module that shares the same mtx type (Not a strict requirement, but easier to reproduce this way). Consider module A and module B: - From enroll() - subr_witness.c: * Load module A. Everything seems fine right now. wA-w_refcount == 1 ; wA-w_name = "sound softc" * Load module B. * w->w_name == description will always fail. ("sound softc" from A and B point to different address). * wA->w_refcount > 0 && strcmp(description, wA->w_name) == 0 * enroll() will return wA instead of returning (possibly unique) wB. wA->w_refcount++ , == 2. * Unload module A, mtx_destroy(), wA->w_name become invalid, but wA->w_refcount-- become 1 instead of 0. wA will not be removed from witness list. * Some other places call mtx_init(), iterating witness list, found wA, failed on wA->w_name == description * wA->w_refcount > 0 && strcmp(description, wA->w_name) * Panic on strcmp() since wA->w_name no longer point to valid address. Note that this could happened in other places as well, not just sound (eg. consider lots of drivers that share simmilar MTX_NETWORK_LOCK). Solutions (for sound case): 1) Provide unique mtx type string for each mutex creation (chosen) or 2) Put "sound softc" global variable somewhere and use it. |
/freebsd-9.3-release/sys/dev/sound/isa/ | ||
H A D | ad1816.c | diff 167608 Thu Mar 15 14:41:27 MDT 2007 ariff Fix severe out-of-bound mtx "type" pointer, causing WITNESS refcount confusions and panic provided that the following conditions are met: 1) WITNESS is enabled (watch/trace). 2) Using modules, instead of statically linked (Not a strict requirement, but easier to reproduce this way). 3) 2 or more modules share the same mtx type ("sound softc"). - They might share the same name (strcmp() == 0), but it always point to different address. 4) Repetitive kldunload/load on any module that shares the same mtx type (Not a strict requirement, but easier to reproduce this way). Consider module A and module B: - From enroll() - subr_witness.c: * Load module A. Everything seems fine right now. wA-w_refcount == 1 ; wA-w_name = "sound softc" * Load module B. * w->w_name == description will always fail. ("sound softc" from A and B point to different address). * wA->w_refcount > 0 && strcmp(description, wA->w_name) == 0 * enroll() will return wA instead of returning (possibly unique) wB. wA->w_refcount++ , == 2. * Unload module A, mtx_destroy(), wA->w_name become invalid, but wA->w_refcount-- become 1 instead of 0. wA will not be removed from witness list. * Some other places call mtx_init(), iterating witness list, found wA, failed on wA->w_name == description * wA->w_refcount > 0 && strcmp(description, wA->w_name) * Panic on strcmp() since wA->w_name no longer point to valid address. Note that this could happened in other places as well, not just sound (eg. consider lots of drivers that share simmilar MTX_NETWORK_LOCK). Solutions (for sound case): 1) Provide unique mtx type string for each mutex creation (chosen) or 2) Put "sound softc" global variable somewhere and use it. |
H A D | sbc.c | diff 167608 Thu Mar 15 14:41:27 MDT 2007 ariff Fix severe out-of-bound mtx "type" pointer, causing WITNESS refcount confusions and panic provided that the following conditions are met: 1) WITNESS is enabled (watch/trace). 2) Using modules, instead of statically linked (Not a strict requirement, but easier to reproduce this way). 3) 2 or more modules share the same mtx type ("sound softc"). - They might share the same name (strcmp() == 0), but it always point to different address. 4) Repetitive kldunload/load on any module that shares the same mtx type (Not a strict requirement, but easier to reproduce this way). Consider module A and module B: - From enroll() - subr_witness.c: * Load module A. Everything seems fine right now. wA-w_refcount == 1 ; wA-w_name = "sound softc" * Load module B. * w->w_name == description will always fail. ("sound softc" from A and B point to different address). * wA->w_refcount > 0 && strcmp(description, wA->w_name) == 0 * enroll() will return wA instead of returning (possibly unique) wB. wA->w_refcount++ , == 2. * Unload module A, mtx_destroy(), wA->w_name become invalid, but wA->w_refcount-- become 1 instead of 0. wA will not be removed from witness list. * Some other places call mtx_init(), iterating witness list, found wA, failed on wA->w_name == description * wA->w_refcount > 0 && strcmp(description, wA->w_name) * Panic on strcmp() since wA->w_name no longer point to valid address. Note that this could happened in other places as well, not just sound (eg. consider lots of drivers that share simmilar MTX_NETWORK_LOCK). Solutions (for sound case): 1) Provide unique mtx type string for each mutex creation (chosen) or 2) Put "sound softc" global variable somewhere and use it. |
H A D | mss.c | diff 167608 Thu Mar 15 14:41:27 MDT 2007 ariff Fix severe out-of-bound mtx "type" pointer, causing WITNESS refcount confusions and panic provided that the following conditions are met: 1) WITNESS is enabled (watch/trace). 2) Using modules, instead of statically linked (Not a strict requirement, but easier to reproduce this way). 3) 2 or more modules share the same mtx type ("sound softc"). - They might share the same name (strcmp() == 0), but it always point to different address. 4) Repetitive kldunload/load on any module that shares the same mtx type (Not a strict requirement, but easier to reproduce this way). Consider module A and module B: - From enroll() - subr_witness.c: * Load module A. Everything seems fine right now. wA-w_refcount == 1 ; wA-w_name = "sound softc" * Load module B. * w->w_name == description will always fail. ("sound softc" from A and B point to different address). * wA->w_refcount > 0 && strcmp(description, wA->w_name) == 0 * enroll() will return wA instead of returning (possibly unique) wB. wA->w_refcount++ , == 2. * Unload module A, mtx_destroy(), wA->w_name become invalid, but wA->w_refcount-- become 1 instead of 0. wA will not be removed from witness list. * Some other places call mtx_init(), iterating witness list, found wA, failed on wA->w_name == description * wA->w_refcount > 0 && strcmp(description, wA->w_name) * Panic on strcmp() since wA->w_name no longer point to valid address. Note that this could happened in other places as well, not just sound (eg. consider lots of drivers that share simmilar MTX_NETWORK_LOCK). Solutions (for sound case): 1) Provide unique mtx type string for each mutex creation (chosen) or 2) Put "sound softc" global variable somewhere and use it. |
/freebsd-9.3-release/sys/dev/sound/pci/ | ||
H A D | als4000.c | diff 167608 Thu Mar 15 14:41:27 MDT 2007 ariff Fix severe out-of-bound mtx "type" pointer, causing WITNESS refcount confusions and panic provided that the following conditions are met: 1) WITNESS is enabled (watch/trace). 2) Using modules, instead of statically linked (Not a strict requirement, but easier to reproduce this way). 3) 2 or more modules share the same mtx type ("sound softc"). - They might share the same name (strcmp() == 0), but it always point to different address. 4) Repetitive kldunload/load on any module that shares the same mtx type (Not a strict requirement, but easier to reproduce this way). Consider module A and module B: - From enroll() - subr_witness.c: * Load module A. Everything seems fine right now. wA-w_refcount == 1 ; wA-w_name = "sound softc" * Load module B. * w->w_name == description will always fail. ("sound softc" from A and B point to different address). * wA->w_refcount > 0 && strcmp(description, wA->w_name) == 0 * enroll() will return wA instead of returning (possibly unique) wB. wA->w_refcount++ , == 2. * Unload module A, mtx_destroy(), wA->w_name become invalid, but wA->w_refcount-- become 1 instead of 0. wA will not be removed from witness list. * Some other places call mtx_init(), iterating witness list, found wA, failed on wA->w_name == description * wA->w_refcount > 0 && strcmp(description, wA->w_name) * Panic on strcmp() since wA->w_name no longer point to valid address. Note that this could happened in other places as well, not just sound (eg. consider lots of drivers that share simmilar MTX_NETWORK_LOCK). Solutions (for sound case): 1) Provide unique mtx type string for each mutex creation (chosen) or 2) Put "sound softc" global variable somewhere and use it. |
H A D | atiixp.c | diff 167608 Thu Mar 15 14:41:27 MDT 2007 ariff Fix severe out-of-bound mtx "type" pointer, causing WITNESS refcount confusions and panic provided that the following conditions are met: 1) WITNESS is enabled (watch/trace). 2) Using modules, instead of statically linked (Not a strict requirement, but easier to reproduce this way). 3) 2 or more modules share the same mtx type ("sound softc"). - They might share the same name (strcmp() == 0), but it always point to different address. 4) Repetitive kldunload/load on any module that shares the same mtx type (Not a strict requirement, but easier to reproduce this way). Consider module A and module B: - From enroll() - subr_witness.c: * Load module A. Everything seems fine right now. wA-w_refcount == 1 ; wA-w_name = "sound softc" * Load module B. * w->w_name == description will always fail. ("sound softc" from A and B point to different address). * wA->w_refcount > 0 && strcmp(description, wA->w_name) == 0 * enroll() will return wA instead of returning (possibly unique) wB. wA->w_refcount++ , == 2. * Unload module A, mtx_destroy(), wA->w_name become invalid, but wA->w_refcount-- become 1 instead of 0. wA will not be removed from witness list. * Some other places call mtx_init(), iterating witness list, found wA, failed on wA->w_name == description * wA->w_refcount > 0 && strcmp(description, wA->w_name) * Panic on strcmp() since wA->w_name no longer point to valid address. Note that this could happened in other places as well, not just sound (eg. consider lots of drivers that share simmilar MTX_NETWORK_LOCK). Solutions (for sound case): 1) Provide unique mtx type string for each mutex creation (chosen) or 2) Put "sound softc" global variable somewhere and use it. |
H A D | emu10kx-pcm.c | diff 167608 Thu Mar 15 14:41:27 MDT 2007 ariff Fix severe out-of-bound mtx "type" pointer, causing WITNESS refcount confusions and panic provided that the following conditions are met: 1) WITNESS is enabled (watch/trace). 2) Using modules, instead of statically linked (Not a strict requirement, but easier to reproduce this way). 3) 2 or more modules share the same mtx type ("sound softc"). - They might share the same name (strcmp() == 0), but it always point to different address. 4) Repetitive kldunload/load on any module that shares the same mtx type (Not a strict requirement, but easier to reproduce this way). Consider module A and module B: - From enroll() - subr_witness.c: * Load module A. Everything seems fine right now. wA-w_refcount == 1 ; wA-w_name = "sound softc" * Load module B. * w->w_name == description will always fail. ("sound softc" from A and B point to different address). * wA->w_refcount > 0 && strcmp(description, wA->w_name) == 0 * enroll() will return wA instead of returning (possibly unique) wB. wA->w_refcount++ , == 2. * Unload module A, mtx_destroy(), wA->w_name become invalid, but wA->w_refcount-- become 1 instead of 0. wA will not be removed from witness list. * Some other places call mtx_init(), iterating witness list, found wA, failed on wA->w_name == description * wA->w_refcount > 0 && strcmp(description, wA->w_name) * Panic on strcmp() since wA->w_name no longer point to valid address. Note that this could happened in other places as well, not just sound (eg. consider lots of drivers that share simmilar MTX_NETWORK_LOCK). Solutions (for sound case): 1) Provide unique mtx type string for each mutex creation (chosen) or 2) Put "sound softc" global variable somewhere and use it. |
H A D | envy24.c | diff 167608 Thu Mar 15 14:41:27 MDT 2007 ariff Fix severe out-of-bound mtx "type" pointer, causing WITNESS refcount confusions and panic provided that the following conditions are met: 1) WITNESS is enabled (watch/trace). 2) Using modules, instead of statically linked (Not a strict requirement, but easier to reproduce this way). 3) 2 or more modules share the same mtx type ("sound softc"). - They might share the same name (strcmp() == 0), but it always point to different address. 4) Repetitive kldunload/load on any module that shares the same mtx type (Not a strict requirement, but easier to reproduce this way). Consider module A and module B: - From enroll() - subr_witness.c: * Load module A. Everything seems fine right now. wA-w_refcount == 1 ; wA-w_name = "sound softc" * Load module B. * w->w_name == description will always fail. ("sound softc" from A and B point to different address). * wA->w_refcount > 0 && strcmp(description, wA->w_name) == 0 * enroll() will return wA instead of returning (possibly unique) wB. wA->w_refcount++ , == 2. * Unload module A, mtx_destroy(), wA->w_name become invalid, but wA->w_refcount-- become 1 instead of 0. wA will not be removed from witness list. * Some other places call mtx_init(), iterating witness list, found wA, failed on wA->w_name == description * wA->w_refcount > 0 && strcmp(description, wA->w_name) * Panic on strcmp() since wA->w_name no longer point to valid address. Note that this could happened in other places as well, not just sound (eg. consider lots of drivers that share simmilar MTX_NETWORK_LOCK). Solutions (for sound case): 1) Provide unique mtx type string for each mutex creation (chosen) or 2) Put "sound softc" global variable somewhere and use it. |
H A D | envy24ht.c | diff 167608 Thu Mar 15 14:41:27 MDT 2007 ariff Fix severe out-of-bound mtx "type" pointer, causing WITNESS refcount confusions and panic provided that the following conditions are met: 1) WITNESS is enabled (watch/trace). 2) Using modules, instead of statically linked (Not a strict requirement, but easier to reproduce this way). 3) 2 or more modules share the same mtx type ("sound softc"). - They might share the same name (strcmp() == 0), but it always point to different address. 4) Repetitive kldunload/load on any module that shares the same mtx type (Not a strict requirement, but easier to reproduce this way). Consider module A and module B: - From enroll() - subr_witness.c: * Load module A. Everything seems fine right now. wA-w_refcount == 1 ; wA-w_name = "sound softc" * Load module B. * w->w_name == description will always fail. ("sound softc" from A and B point to different address). * wA->w_refcount > 0 && strcmp(description, wA->w_name) == 0 * enroll() will return wA instead of returning (possibly unique) wB. wA->w_refcount++ , == 2. * Unload module A, mtx_destroy(), wA->w_name become invalid, but wA->w_refcount-- become 1 instead of 0. wA will not be removed from witness list. * Some other places call mtx_init(), iterating witness list, found wA, failed on wA->w_name == description * wA->w_refcount > 0 && strcmp(description, wA->w_name) * Panic on strcmp() since wA->w_name no longer point to valid address. Note that this could happened in other places as well, not just sound (eg. consider lots of drivers that share simmilar MTX_NETWORK_LOCK). Solutions (for sound case): 1) Provide unique mtx type string for each mutex creation (chosen) or 2) Put "sound softc" global variable somewhere and use it. |
H A D | maestro.c | diff 167608 Thu Mar 15 14:41:27 MDT 2007 ariff Fix severe out-of-bound mtx "type" pointer, causing WITNESS refcount confusions and panic provided that the following conditions are met: 1) WITNESS is enabled (watch/trace). 2) Using modules, instead of statically linked (Not a strict requirement, but easier to reproduce this way). 3) 2 or more modules share the same mtx type ("sound softc"). - They might share the same name (strcmp() == 0), but it always point to different address. 4) Repetitive kldunload/load on any module that shares the same mtx type (Not a strict requirement, but easier to reproduce this way). Consider module A and module B: - From enroll() - subr_witness.c: * Load module A. Everything seems fine right now. wA-w_refcount == 1 ; wA-w_name = "sound softc" * Load module B. * w->w_name == description will always fail. ("sound softc" from A and B point to different address). * wA->w_refcount > 0 && strcmp(description, wA->w_name) == 0 * enroll() will return wA instead of returning (possibly unique) wB. wA->w_refcount++ , == 2. * Unload module A, mtx_destroy(), wA->w_name become invalid, but wA->w_refcount-- become 1 instead of 0. wA will not be removed from witness list. * Some other places call mtx_init(), iterating witness list, found wA, failed on wA->w_name == description * wA->w_refcount > 0 && strcmp(description, wA->w_name) * Panic on strcmp() since wA->w_name no longer point to valid address. Note that this could happened in other places as well, not just sound (eg. consider lots of drivers that share simmilar MTX_NETWORK_LOCK). Solutions (for sound case): 1) Provide unique mtx type string for each mutex creation (chosen) or 2) Put "sound softc" global variable somewhere and use it. |
H A D | maestro3.c | diff 167608 Thu Mar 15 14:41:27 MDT 2007 ariff Fix severe out-of-bound mtx "type" pointer, causing WITNESS refcount confusions and panic provided that the following conditions are met: 1) WITNESS is enabled (watch/trace). 2) Using modules, instead of statically linked (Not a strict requirement, but easier to reproduce this way). 3) 2 or more modules share the same mtx type ("sound softc"). - They might share the same name (strcmp() == 0), but it always point to different address. 4) Repetitive kldunload/load on any module that shares the same mtx type (Not a strict requirement, but easier to reproduce this way). Consider module A and module B: - From enroll() - subr_witness.c: * Load module A. Everything seems fine right now. wA-w_refcount == 1 ; wA-w_name = "sound softc" * Load module B. * w->w_name == description will always fail. ("sound softc" from A and B point to different address). * wA->w_refcount > 0 && strcmp(description, wA->w_name) == 0 * enroll() will return wA instead of returning (possibly unique) wB. wA->w_refcount++ , == 2. * Unload module A, mtx_destroy(), wA->w_name become invalid, but wA->w_refcount-- become 1 instead of 0. wA will not be removed from witness list. * Some other places call mtx_init(), iterating witness list, found wA, failed on wA->w_name == description * wA->w_refcount > 0 && strcmp(description, wA->w_name) * Panic on strcmp() since wA->w_name no longer point to valid address. Note that this could happened in other places as well, not just sound (eg. consider lots of drivers that share simmilar MTX_NETWORK_LOCK). Solutions (for sound case): 1) Provide unique mtx type string for each mutex creation (chosen) or 2) Put "sound softc" global variable somewhere and use it. |
H A D | via82c686.c | diff 167608 Thu Mar 15 14:41:27 MDT 2007 ariff Fix severe out-of-bound mtx "type" pointer, causing WITNESS refcount confusions and panic provided that the following conditions are met: 1) WITNESS is enabled (watch/trace). 2) Using modules, instead of statically linked (Not a strict requirement, but easier to reproduce this way). 3) 2 or more modules share the same mtx type ("sound softc"). - They might share the same name (strcmp() == 0), but it always point to different address. 4) Repetitive kldunload/load on any module that shares the same mtx type (Not a strict requirement, but easier to reproduce this way). Consider module A and module B: - From enroll() - subr_witness.c: * Load module A. Everything seems fine right now. wA-w_refcount == 1 ; wA-w_name = "sound softc" * Load module B. * w->w_name == description will always fail. ("sound softc" from A and B point to different address). * wA->w_refcount > 0 && strcmp(description, wA->w_name) == 0 * enroll() will return wA instead of returning (possibly unique) wB. wA->w_refcount++ , == 2. * Unload module A, mtx_destroy(), wA->w_name become invalid, but wA->w_refcount-- become 1 instead of 0. wA will not be removed from witness list. * Some other places call mtx_init(), iterating witness list, found wA, failed on wA->w_name == description * wA->w_refcount > 0 && strcmp(description, wA->w_name) * Panic on strcmp() since wA->w_name no longer point to valid address. Note that this could happened in other places as well, not just sound (eg. consider lots of drivers that share simmilar MTX_NETWORK_LOCK). Solutions (for sound case): 1) Provide unique mtx type string for each mutex creation (chosen) or 2) Put "sound softc" global variable somewhere and use it. |
H A D | cmi.c | diff 167608 Thu Mar 15 14:41:27 MDT 2007 ariff Fix severe out-of-bound mtx "type" pointer, causing WITNESS refcount confusions and panic provided that the following conditions are met: 1) WITNESS is enabled (watch/trace). 2) Using modules, instead of statically linked (Not a strict requirement, but easier to reproduce this way). 3) 2 or more modules share the same mtx type ("sound softc"). - They might share the same name (strcmp() == 0), but it always point to different address. 4) Repetitive kldunload/load on any module that shares the same mtx type (Not a strict requirement, but easier to reproduce this way). Consider module A and module B: - From enroll() - subr_witness.c: * Load module A. Everything seems fine right now. wA-w_refcount == 1 ; wA-w_name = "sound softc" * Load module B. * w->w_name == description will always fail. ("sound softc" from A and B point to different address). * wA->w_refcount > 0 && strcmp(description, wA->w_name) == 0 * enroll() will return wA instead of returning (possibly unique) wB. wA->w_refcount++ , == 2. * Unload module A, mtx_destroy(), wA->w_name become invalid, but wA->w_refcount-- become 1 instead of 0. wA will not be removed from witness list. * Some other places call mtx_init(), iterating witness list, found wA, failed on wA->w_name == description * wA->w_refcount > 0 && strcmp(description, wA->w_name) * Panic on strcmp() since wA->w_name no longer point to valid address. Note that this could happened in other places as well, not just sound (eg. consider lots of drivers that share simmilar MTX_NETWORK_LOCK). Solutions (for sound case): 1) Provide unique mtx type string for each mutex creation (chosen) or 2) Put "sound softc" global variable somewhere and use it. |
H A D | ds1.c | diff 167608 Thu Mar 15 14:41:27 MDT 2007 ariff Fix severe out-of-bound mtx "type" pointer, causing WITNESS refcount confusions and panic provided that the following conditions are met: 1) WITNESS is enabled (watch/trace). 2) Using modules, instead of statically linked (Not a strict requirement, but easier to reproduce this way). 3) 2 or more modules share the same mtx type ("sound softc"). - They might share the same name (strcmp() == 0), but it always point to different address. 4) Repetitive kldunload/load on any module that shares the same mtx type (Not a strict requirement, but easier to reproduce this way). Consider module A and module B: - From enroll() - subr_witness.c: * Load module A. Everything seems fine right now. wA-w_refcount == 1 ; wA-w_name = "sound softc" * Load module B. * w->w_name == description will always fail. ("sound softc" from A and B point to different address). * wA->w_refcount > 0 && strcmp(description, wA->w_name) == 0 * enroll() will return wA instead of returning (possibly unique) wB. wA->w_refcount++ , == 2. * Unload module A, mtx_destroy(), wA->w_name become invalid, but wA->w_refcount-- become 1 instead of 0. wA will not be removed from witness list. * Some other places call mtx_init(), iterating witness list, found wA, failed on wA->w_name == description * wA->w_refcount > 0 && strcmp(description, wA->w_name) * Panic on strcmp() since wA->w_name no longer point to valid address. Note that this could happened in other places as well, not just sound (eg. consider lots of drivers that share simmilar MTX_NETWORK_LOCK). Solutions (for sound case): 1) Provide unique mtx type string for each mutex creation (chosen) or 2) Put "sound softc" global variable somewhere and use it. |
H A D | emu10k1.c | diff 167608 Thu Mar 15 14:41:27 MDT 2007 ariff Fix severe out-of-bound mtx "type" pointer, causing WITNESS refcount confusions and panic provided that the following conditions are met: 1) WITNESS is enabled (watch/trace). 2) Using modules, instead of statically linked (Not a strict requirement, but easier to reproduce this way). 3) 2 or more modules share the same mtx type ("sound softc"). - They might share the same name (strcmp() == 0), but it always point to different address. 4) Repetitive kldunload/load on any module that shares the same mtx type (Not a strict requirement, but easier to reproduce this way). Consider module A and module B: - From enroll() - subr_witness.c: * Load module A. Everything seems fine right now. wA-w_refcount == 1 ; wA-w_name = "sound softc" * Load module B. * w->w_name == description will always fail. ("sound softc" from A and B point to different address). * wA->w_refcount > 0 && strcmp(description, wA->w_name) == 0 * enroll() will return wA instead of returning (possibly unique) wB. wA->w_refcount++ , == 2. * Unload module A, mtx_destroy(), wA->w_name become invalid, but wA->w_refcount-- become 1 instead of 0. wA will not be removed from witness list. * Some other places call mtx_init(), iterating witness list, found wA, failed on wA->w_name == description * wA->w_refcount > 0 && strcmp(description, wA->w_name) * Panic on strcmp() since wA->w_name no longer point to valid address. Note that this could happened in other places as well, not just sound (eg. consider lots of drivers that share simmilar MTX_NETWORK_LOCK). Solutions (for sound case): 1) Provide unique mtx type string for each mutex creation (chosen) or 2) Put "sound softc" global variable somewhere and use it. |
H A D | solo.c | diff 167608 Thu Mar 15 14:41:27 MDT 2007 ariff Fix severe out-of-bound mtx "type" pointer, causing WITNESS refcount confusions and panic provided that the following conditions are met: 1) WITNESS is enabled (watch/trace). 2) Using modules, instead of statically linked (Not a strict requirement, but easier to reproduce this way). 3) 2 or more modules share the same mtx type ("sound softc"). - They might share the same name (strcmp() == 0), but it always point to different address. 4) Repetitive kldunload/load on any module that shares the same mtx type (Not a strict requirement, but easier to reproduce this way). Consider module A and module B: - From enroll() - subr_witness.c: * Load module A. Everything seems fine right now. wA-w_refcount == 1 ; wA-w_name = "sound softc" * Load module B. * w->w_name == description will always fail. ("sound softc" from A and B point to different address). * wA->w_refcount > 0 && strcmp(description, wA->w_name) == 0 * enroll() will return wA instead of returning (possibly unique) wB. wA->w_refcount++ , == 2. * Unload module A, mtx_destroy(), wA->w_name become invalid, but wA->w_refcount-- become 1 instead of 0. wA will not be removed from witness list. * Some other places call mtx_init(), iterating witness list, found wA, failed on wA->w_name == description * wA->w_refcount > 0 && strcmp(description, wA->w_name) * Panic on strcmp() since wA->w_name no longer point to valid address. Note that this could happened in other places as well, not just sound (eg. consider lots of drivers that share simmilar MTX_NETWORK_LOCK). Solutions (for sound case): 1) Provide unique mtx type string for each mutex creation (chosen) or 2) Put "sound softc" global variable somewhere and use it. |
H A D | t4dwave.c | diff 167608 Thu Mar 15 14:41:27 MDT 2007 ariff Fix severe out-of-bound mtx "type" pointer, causing WITNESS refcount confusions and panic provided that the following conditions are met: 1) WITNESS is enabled (watch/trace). 2) Using modules, instead of statically linked (Not a strict requirement, but easier to reproduce this way). 3) 2 or more modules share the same mtx type ("sound softc"). - They might share the same name (strcmp() == 0), but it always point to different address. 4) Repetitive kldunload/load on any module that shares the same mtx type (Not a strict requirement, but easier to reproduce this way). Consider module A and module B: - From enroll() - subr_witness.c: * Load module A. Everything seems fine right now. wA-w_refcount == 1 ; wA-w_name = "sound softc" * Load module B. * w->w_name == description will always fail. ("sound softc" from A and B point to different address). * wA->w_refcount > 0 && strcmp(description, wA->w_name) == 0 * enroll() will return wA instead of returning (possibly unique) wB. wA->w_refcount++ , == 2. * Unload module A, mtx_destroy(), wA->w_name become invalid, but wA->w_refcount-- become 1 instead of 0. wA will not be removed from witness list. * Some other places call mtx_init(), iterating witness list, found wA, failed on wA->w_name == description * wA->w_refcount > 0 && strcmp(description, wA->w_name) * Panic on strcmp() since wA->w_name no longer point to valid address. Note that this could happened in other places as well, not just sound (eg. consider lots of drivers that share simmilar MTX_NETWORK_LOCK). Solutions (for sound case): 1) Provide unique mtx type string for each mutex creation (chosen) or 2) Put "sound softc" global variable somewhere and use it. |
H A D | via8233.c | diff 167608 Thu Mar 15 14:41:27 MDT 2007 ariff Fix severe out-of-bound mtx "type" pointer, causing WITNESS refcount confusions and panic provided that the following conditions are met: 1) WITNESS is enabled (watch/trace). 2) Using modules, instead of statically linked (Not a strict requirement, but easier to reproduce this way). 3) 2 or more modules share the same mtx type ("sound softc"). - They might share the same name (strcmp() == 0), but it always point to different address. 4) Repetitive kldunload/load on any module that shares the same mtx type (Not a strict requirement, but easier to reproduce this way). Consider module A and module B: - From enroll() - subr_witness.c: * Load module A. Everything seems fine right now. wA-w_refcount == 1 ; wA-w_name = "sound softc" * Load module B. * w->w_name == description will always fail. ("sound softc" from A and B point to different address). * wA->w_refcount > 0 && strcmp(description, wA->w_name) == 0 * enroll() will return wA instead of returning (possibly unique) wB. wA->w_refcount++ , == 2. * Unload module A, mtx_destroy(), wA->w_name become invalid, but wA->w_refcount-- become 1 instead of 0. wA will not be removed from witness list. * Some other places call mtx_init(), iterating witness list, found wA, failed on wA->w_name == description * wA->w_refcount > 0 && strcmp(description, wA->w_name) * Panic on strcmp() since wA->w_name no longer point to valid address. Note that this could happened in other places as well, not just sound (eg. consider lots of drivers that share simmilar MTX_NETWORK_LOCK). Solutions (for sound case): 1) Provide unique mtx type string for each mutex creation (chosen) or 2) Put "sound softc" global variable somewhere and use it. |
H A D | es137x.c | diff 167608 Thu Mar 15 14:41:27 MDT 2007 ariff Fix severe out-of-bound mtx "type" pointer, causing WITNESS refcount confusions and panic provided that the following conditions are met: 1) WITNESS is enabled (watch/trace). 2) Using modules, instead of statically linked (Not a strict requirement, but easier to reproduce this way). 3) 2 or more modules share the same mtx type ("sound softc"). - They might share the same name (strcmp() == 0), but it always point to different address. 4) Repetitive kldunload/load on any module that shares the same mtx type (Not a strict requirement, but easier to reproduce this way). Consider module A and module B: - From enroll() - subr_witness.c: * Load module A. Everything seems fine right now. wA-w_refcount == 1 ; wA-w_name = "sound softc" * Load module B. * w->w_name == description will always fail. ("sound softc" from A and B point to different address). * wA->w_refcount > 0 && strcmp(description, wA->w_name) == 0 * enroll() will return wA instead of returning (possibly unique) wB. wA->w_refcount++ , == 2. * Unload module A, mtx_destroy(), wA->w_name become invalid, but wA->w_refcount-- become 1 instead of 0. wA will not be removed from witness list. * Some other places call mtx_init(), iterating witness list, found wA, failed on wA->w_name == description * wA->w_refcount > 0 && strcmp(description, wA->w_name) * Panic on strcmp() since wA->w_name no longer point to valid address. Note that this could happened in other places as well, not just sound (eg. consider lots of drivers that share simmilar MTX_NETWORK_LOCK). Solutions (for sound case): 1) Provide unique mtx type string for each mutex creation (chosen) or 2) Put "sound softc" global variable somewhere and use it. |
H A D | ich.c | diff 167608 Thu Mar 15 14:41:27 MDT 2007 ariff Fix severe out-of-bound mtx "type" pointer, causing WITNESS refcount confusions and panic provided that the following conditions are met: 1) WITNESS is enabled (watch/trace). 2) Using modules, instead of statically linked (Not a strict requirement, but easier to reproduce this way). 3) 2 or more modules share the same mtx type ("sound softc"). - They might share the same name (strcmp() == 0), but it always point to different address. 4) Repetitive kldunload/load on any module that shares the same mtx type (Not a strict requirement, but easier to reproduce this way). Consider module A and module B: - From enroll() - subr_witness.c: * Load module A. Everything seems fine right now. wA-w_refcount == 1 ; wA-w_name = "sound softc" * Load module B. * w->w_name == description will always fail. ("sound softc" from A and B point to different address). * wA->w_refcount > 0 && strcmp(description, wA->w_name) == 0 * enroll() will return wA instead of returning (possibly unique) wB. wA->w_refcount++ , == 2. * Unload module A, mtx_destroy(), wA->w_name become invalid, but wA->w_refcount-- become 1 instead of 0. wA will not be removed from witness list. * Some other places call mtx_init(), iterating witness list, found wA, failed on wA->w_name == description * wA->w_refcount > 0 && strcmp(description, wA->w_name) * Panic on strcmp() since wA->w_name no longer point to valid address. Note that this could happened in other places as well, not just sound (eg. consider lots of drivers that share simmilar MTX_NETWORK_LOCK). Solutions (for sound case): 1) Provide unique mtx type string for each mutex creation (chosen) or 2) Put "sound softc" global variable somewhere and use it. |
Completed in 372 milliseconds