Searched hist:163953 (Results 1 - 25 of 44) sorted by relevance

12

/freebsd-10.1-release/sys/netinet/
H A Dsctp_peeloff.h163953 Fri Nov 03 13:23:16 MST 2006 rrs Ok, here it is, we finally add SCTP to current. Note that this
work is not just mine, but it is also the works of Peter Lei
and Michael Tuexen. They both are my two key other developers
working on the project.. and they need ata-boy's too:
****
peterlei@cisco.com
tuexen@fh-muenster.de
****
I did do a make sysent which updated the
syscall's and sysproto.. I hope that is correct... without
it you don't build since we have new syscalls for SCTP :-0

So go out and look at the NOTES, add
option SCTP (make sure inet and inet6 are present too)
and play with SCTP.

I will see about comitting some test tools I have after I
figure out where I should place them. I also have a
lib (libsctp.a) that adds some of the missing socketapi
functions that I need to put into lib's.. I will talk
to George about this :-)

There may still be some 64 bit issues in here, none of
us have a 64 bit processor to test with yet.. Michael
may have a MAC but thats another beast too..

If you have a mac and want to use SCTP contact Michael
he maintains a web site with a loadable module with
this code :-)

Reviewed by: gnn
Approved by: gnn
H A Dsctp_crc32.h163953 Fri Nov 03 13:23:16 MST 2006 rrs Ok, here it is, we finally add SCTP to current. Note that this
work is not just mine, but it is also the works of Peter Lei
and Michael Tuexen. They both are my two key other developers
working on the project.. and they need ata-boy's too:
****
peterlei@cisco.com
tuexen@fh-muenster.de
****
I did do a make sysent which updated the
syscall's and sysproto.. I hope that is correct... without
it you don't build since we have new syscalls for SCTP :-0

So go out and look at the NOTES, add
option SCTP (make sure inet and inet6 are present too)
and play with SCTP.

I will see about comitting some test tools I have after I
figure out where I should place them. I also have a
lib (libsctp.a) that adds some of the missing socketapi
functions that I need to put into lib's.. I will talk
to George about this :-)

There may still be some 64 bit issues in here, none of
us have a 64 bit processor to test with yet.. Michael
may have a MAC but thats another beast too..

If you have a mac and want to use SCTP contact Michael
he maintains a web site with a loadable module with
this code :-)

Reviewed by: gnn
Approved by: gnn
H A Dsctp_bsd_addr.h163953 Fri Nov 03 13:23:16 MST 2006 rrs Ok, here it is, we finally add SCTP to current. Note that this
work is not just mine, but it is also the works of Peter Lei
and Michael Tuexen. They both are my two key other developers
working on the project.. and they need ata-boy's too:
****
peterlei@cisco.com
tuexen@fh-muenster.de
****
I did do a make sysent which updated the
syscall's and sysproto.. I hope that is correct... without
it you don't build since we have new syscalls for SCTP :-0

So go out and look at the NOTES, add
option SCTP (make sure inet and inet6 are present too)
and play with SCTP.

I will see about comitting some test tools I have after I
figure out where I should place them. I also have a
lib (libsctp.a) that adds some of the missing socketapi
functions that I need to put into lib's.. I will talk
to George about this :-)

There may still be some 64 bit issues in here, none of
us have a 64 bit processor to test with yet.. Michael
may have a MAC but thats another beast too..

If you have a mac and want to use SCTP contact Michael
he maintains a web site with a loadable module with
this code :-)

Reviewed by: gnn
Approved by: gnn
H A Dsctp_timer.h163953 Fri Nov 03 13:23:16 MST 2006 rrs Ok, here it is, we finally add SCTP to current. Note that this
work is not just mine, but it is also the works of Peter Lei
and Michael Tuexen. They both are my two key other developers
working on the project.. and they need ata-boy's too:
****
peterlei@cisco.com
tuexen@fh-muenster.de
****
I did do a make sysent which updated the
syscall's and sysproto.. I hope that is correct... without
it you don't build since we have new syscalls for SCTP :-0

So go out and look at the NOTES, add
option SCTP (make sure inet and inet6 are present too)
and play with SCTP.

I will see about comitting some test tools I have after I
figure out where I should place them. I also have a
lib (libsctp.a) that adds some of the missing socketapi
functions that I need to put into lib's.. I will talk
to George about this :-)

There may still be some 64 bit issues in here, none of
us have a 64 bit processor to test with yet.. Michael
may have a MAC but thats another beast too..

If you have a mac and want to use SCTP contact Michael
he maintains a web site with a loadable module with
this code :-)

Reviewed by: gnn
Approved by: gnn
H A Dsctp_auth.h163953 Fri Nov 03 13:23:16 MST 2006 rrs Ok, here it is, we finally add SCTP to current. Note that this
work is not just mine, but it is also the works of Peter Lei
and Michael Tuexen. They both are my two key other developers
working on the project.. and they need ata-boy's too:
****
peterlei@cisco.com
tuexen@fh-muenster.de
****
I did do a make sysent which updated the
syscall's and sysproto.. I hope that is correct... without
it you don't build since we have new syscalls for SCTP :-0

So go out and look at the NOTES, add
option SCTP (make sure inet and inet6 are present too)
and play with SCTP.

I will see about comitting some test tools I have after I
figure out where I should place them. I also have a
lib (libsctp.a) that adds some of the missing socketapi
functions that I need to put into lib's.. I will talk
to George about this :-)

There may still be some 64 bit issues in here, none of
us have a 64 bit processor to test with yet.. Michael
may have a MAC but thats another beast too..

If you have a mac and want to use SCTP contact Michael
he maintains a web site with a loadable module with
this code :-)

Reviewed by: gnn
Approved by: gnn
H A Dsctp_indata.h163953 Fri Nov 03 13:23:16 MST 2006 rrs Ok, here it is, we finally add SCTP to current. Note that this
work is not just mine, but it is also the works of Peter Lei
and Michael Tuexen. They both are my two key other developers
working on the project.. and they need ata-boy's too:
****
peterlei@cisco.com
tuexen@fh-muenster.de
****
I did do a make sysent which updated the
syscall's and sysproto.. I hope that is correct... without
it you don't build since we have new syscalls for SCTP :-0

So go out and look at the NOTES, add
option SCTP (make sure inet and inet6 are present too)
and play with SCTP.

I will see about comitting some test tools I have after I
figure out where I should place them. I also have a
lib (libsctp.a) that adds some of the missing socketapi
functions that I need to put into lib's.. I will talk
to George about this :-)

There may still be some 64 bit issues in here, none of
us have a 64 bit processor to test with yet.. Michael
may have a MAC but thats another beast too..

If you have a mac and want to use SCTP contact Michael
he maintains a web site with a loadable module with
this code :-)

Reviewed by: gnn
Approved by: gnn
H A Dsctp_lock_bsd.h163953 Fri Nov 03 13:23:16 MST 2006 rrs Ok, here it is, we finally add SCTP to current. Note that this
work is not just mine, but it is also the works of Peter Lei
and Michael Tuexen. They both are my two key other developers
working on the project.. and they need ata-boy's too:
****
peterlei@cisco.com
tuexen@fh-muenster.de
****
I did do a make sysent which updated the
syscall's and sysproto.. I hope that is correct... without
it you don't build since we have new syscalls for SCTP :-0

So go out and look at the NOTES, add
option SCTP (make sure inet and inet6 are present too)
and play with SCTP.

I will see about comitting some test tools I have after I
figure out where I should place them. I also have a
lib (libsctp.a) that adds some of the missing socketapi
functions that I need to put into lib's.. I will talk
to George about this :-)

There may still be some 64 bit issues in here, none of
us have a 64 bit processor to test with yet.. Michael
may have a MAC but thats another beast too..

If you have a mac and want to use SCTP contact Michael
he maintains a web site with a loadable module with
this code :-)

Reviewed by: gnn
Approved by: gnn
H A Dsctp_asconf.h163953 Fri Nov 03 13:23:16 MST 2006 rrs Ok, here it is, we finally add SCTP to current. Note that this
work is not just mine, but it is also the works of Peter Lei
and Michael Tuexen. They both are my two key other developers
working on the project.. and they need ata-boy's too:
****
peterlei@cisco.com
tuexen@fh-muenster.de
****
I did do a make sysent which updated the
syscall's and sysproto.. I hope that is correct... without
it you don't build since we have new syscalls for SCTP :-0

So go out and look at the NOTES, add
option SCTP (make sure inet and inet6 are present too)
and play with SCTP.

I will see about comitting some test tools I have after I
figure out where I should place them. I also have a
lib (libsctp.a) that adds some of the missing socketapi
functions that I need to put into lib's.. I will talk
to George about this :-)

There may still be some 64 bit issues in here, none of
us have a 64 bit processor to test with yet.. Michael
may have a MAC but thats another beast too..

If you have a mac and want to use SCTP contact Michael
he maintains a web site with a loadable module with
this code :-)

Reviewed by: gnn
Approved by: gnn
H A Dsctp_crc32.c163953 Fri Nov 03 13:23:16 MST 2006 rrs Ok, here it is, we finally add SCTP to current. Note that this
work is not just mine, but it is also the works of Peter Lei
and Michael Tuexen. They both are my two key other developers
working on the project.. and they need ata-boy's too:
****
peterlei@cisco.com
tuexen@fh-muenster.de
****
I did do a make sysent which updated the
syscall's and sysproto.. I hope that is correct... without
it you don't build since we have new syscalls for SCTP :-0

So go out and look at the NOTES, add
option SCTP (make sure inet and inet6 are present too)
and play with SCTP.

I will see about comitting some test tools I have after I
figure out where I should place them. I also have a
lib (libsctp.a) that adds some of the missing socketapi
functions that I need to put into lib's.. I will talk
to George about this :-)

There may still be some 64 bit issues in here, none of
us have a 64 bit processor to test with yet.. Michael
may have a MAC but thats another beast too..

If you have a mac and want to use SCTP contact Michael
he maintains a web site with a loadable module with
this code :-)

Reviewed by: gnn
Approved by: gnn
H A Dsctp_os.h163953 Fri Nov 03 13:23:16 MST 2006 rrs Ok, here it is, we finally add SCTP to current. Note that this
work is not just mine, but it is also the works of Peter Lei
and Michael Tuexen. They both are my two key other developers
working on the project.. and they need ata-boy's too:
****
peterlei@cisco.com
tuexen@fh-muenster.de
****
I did do a make sysent which updated the
syscall's and sysproto.. I hope that is correct... without
it you don't build since we have new syscalls for SCTP :-0

So go out and look at the NOTES, add
option SCTP (make sure inet and inet6 are present too)
and play with SCTP.

I will see about comitting some test tools I have after I
figure out where I should place them. I also have a
lib (libsctp.a) that adds some of the missing socketapi
functions that I need to put into lib's.. I will talk
to George about this :-)

There may still be some 64 bit issues in here, none of
us have a 64 bit processor to test with yet.. Michael
may have a MAC but thats another beast too..

If you have a mac and want to use SCTP contact Michael
he maintains a web site with a loadable module with
this code :-)

Reviewed by: gnn
Approved by: gnn
H A Dsctp_bsd_addr.c163953 Fri Nov 03 13:23:16 MST 2006 rrs Ok, here it is, we finally add SCTP to current. Note that this
work is not just mine, but it is also the works of Peter Lei
and Michael Tuexen. They both are my two key other developers
working on the project.. and they need ata-boy's too:
****
peterlei@cisco.com
tuexen@fh-muenster.de
****
I did do a make sysent which updated the
syscall's and sysproto.. I hope that is correct... without
it you don't build since we have new syscalls for SCTP :-0

So go out and look at the NOTES, add
option SCTP (make sure inet and inet6 are present too)
and play with SCTP.

I will see about comitting some test tools I have after I
figure out where I should place them. I also have a
lib (libsctp.a) that adds some of the missing socketapi
functions that I need to put into lib's.. I will talk
to George about this :-)

There may still be some 64 bit issues in here, none of
us have a 64 bit processor to test with yet.. Michael
may have a MAC but thats another beast too..

If you have a mac and want to use SCTP contact Michael
he maintains a web site with a loadable module with
this code :-)

Reviewed by: gnn
Approved by: gnn
H A Dsctp_peeloff.c163953 Fri Nov 03 13:23:16 MST 2006 rrs Ok, here it is, we finally add SCTP to current. Note that this
work is not just mine, but it is also the works of Peter Lei
and Michael Tuexen. They both are my two key other developers
working on the project.. and they need ata-boy's too:
****
peterlei@cisco.com
tuexen@fh-muenster.de
****
I did do a make sysent which updated the
syscall's and sysproto.. I hope that is correct... without
it you don't build since we have new syscalls for SCTP :-0

So go out and look at the NOTES, add
option SCTP (make sure inet and inet6 are present too)
and play with SCTP.

I will see about comitting some test tools I have after I
figure out where I should place them. I also have a
lib (libsctp.a) that adds some of the missing socketapi
functions that I need to put into lib's.. I will talk
to George about this :-)

There may still be some 64 bit issues in here, none of
us have a 64 bit processor to test with yet.. Michael
may have a MAC but thats another beast too..

If you have a mac and want to use SCTP contact Michael
he maintains a web site with a loadable module with
this code :-)

Reviewed by: gnn
Approved by: gnn
H A Dsctp.h163953 Fri Nov 03 13:23:16 MST 2006 rrs Ok, here it is, we finally add SCTP to current. Note that this
work is not just mine, but it is also the works of Peter Lei
and Michael Tuexen. They both are my two key other developers
working on the project.. and they need ata-boy's too:
****
peterlei@cisco.com
tuexen@fh-muenster.de
****
I did do a make sysent which updated the
syscall's and sysproto.. I hope that is correct... without
it you don't build since we have new syscalls for SCTP :-0

So go out and look at the NOTES, add
option SCTP (make sure inet and inet6 are present too)
and play with SCTP.

I will see about comitting some test tools I have after I
figure out where I should place them. I also have a
lib (libsctp.a) that adds some of the missing socketapi
functions that I need to put into lib's.. I will talk
to George about this :-)

There may still be some 64 bit issues in here, none of
us have a 64 bit processor to test with yet.. Michael
may have a MAC but thats another beast too..

If you have a mac and want to use SCTP contact Michael
he maintains a web site with a loadable module with
this code :-)

Reviewed by: gnn
Approved by: gnn
H A Dsctp_auth.c163953 Fri Nov 03 13:23:16 MST 2006 rrs Ok, here it is, we finally add SCTP to current. Note that this
work is not just mine, but it is also the works of Peter Lei
and Michael Tuexen. They both are my two key other developers
working on the project.. and they need ata-boy's too:
****
peterlei@cisco.com
tuexen@fh-muenster.de
****
I did do a make sysent which updated the
syscall's and sysproto.. I hope that is correct... without
it you don't build since we have new syscalls for SCTP :-0

So go out and look at the NOTES, add
option SCTP (make sure inet and inet6 are present too)
and play with SCTP.

I will see about comitting some test tools I have after I
figure out where I should place them. I also have a
lib (libsctp.a) that adds some of the missing socketapi
functions that I need to put into lib's.. I will talk
to George about this :-)

There may still be some 64 bit issues in here, none of
us have a 64 bit processor to test with yet.. Michael
may have a MAC but thats another beast too..

If you have a mac and want to use SCTP contact Michael
he maintains a web site with a loadable module with
this code :-)

Reviewed by: gnn
Approved by: gnn
H A Din_proto.cdiff 163953 Fri Nov 03 13:23:16 MST 2006 rrs Ok, here it is, we finally add SCTP to current. Note that this
work is not just mine, but it is also the works of Peter Lei
and Michael Tuexen. They both are my two key other developers
working on the project.. and they need ata-boy's too:
****
peterlei@cisco.com
tuexen@fh-muenster.de
****
I did do a make sysent which updated the
syscall's and sysproto.. I hope that is correct... without
it you don't build since we have new syscalls for SCTP :-0

So go out and look at the NOTES, add
option SCTP (make sure inet and inet6 are present too)
and play with SCTP.

I will see about comitting some test tools I have after I
figure out where I should place them. I also have a
lib (libsctp.a) that adds some of the missing socketapi
functions that I need to put into lib's.. I will talk
to George about this :-)

There may still be some 64 bit issues in here, none of
us have a 64 bit processor to test with yet.. Michael
may have a MAC but thats another beast too..

If you have a mac and want to use SCTP contact Michael
he maintains a web site with a loadable module with
this code :-)

Reviewed by: gnn
Approved by: gnn
H A Dsctp_asconf.c163953 Fri Nov 03 13:23:16 MST 2006 rrs Ok, here it is, we finally add SCTP to current. Note that this
work is not just mine, but it is also the works of Peter Lei
and Michael Tuexen. They both are my two key other developers
working on the project.. and they need ata-boy's too:
****
peterlei@cisco.com
tuexen@fh-muenster.de
****
I did do a make sysent which updated the
syscall's and sysproto.. I hope that is correct... without
it you don't build since we have new syscalls for SCTP :-0

So go out and look at the NOTES, add
option SCTP (make sure inet and inet6 are present too)
and play with SCTP.

I will see about comitting some test tools I have after I
figure out where I should place them. I also have a
lib (libsctp.a) that adds some of the missing socketapi
functions that I need to put into lib's.. I will talk
to George about this :-)

There may still be some 64 bit issues in here, none of
us have a 64 bit processor to test with yet.. Michael
may have a MAC but thats another beast too..

If you have a mac and want to use SCTP contact Michael
he maintains a web site with a loadable module with
this code :-)

Reviewed by: gnn
Approved by: gnn
H A Dsctp_pcb.h163953 Fri Nov 03 13:23:16 MST 2006 rrs Ok, here it is, we finally add SCTP to current. Note that this
work is not just mine, but it is also the works of Peter Lei
and Michael Tuexen. They both are my two key other developers
working on the project.. and they need ata-boy's too:
****
peterlei@cisco.com
tuexen@fh-muenster.de
****
I did do a make sysent which updated the
syscall's and sysproto.. I hope that is correct... without
it you don't build since we have new syscalls for SCTP :-0

So go out and look at the NOTES, add
option SCTP (make sure inet and inet6 are present too)
and play with SCTP.

I will see about comitting some test tools I have after I
figure out where I should place them. I also have a
lib (libsctp.a) that adds some of the missing socketapi
functions that I need to put into lib's.. I will talk
to George about this :-)

There may still be some 64 bit issues in here, none of
us have a 64 bit processor to test with yet.. Michael
may have a MAC but thats another beast too..

If you have a mac and want to use SCTP contact Michael
he maintains a web site with a loadable module with
this code :-)

Reviewed by: gnn
Approved by: gnn
H A Dsctp_timer.c163953 Fri Nov 03 13:23:16 MST 2006 rrs Ok, here it is, we finally add SCTP to current. Note that this
work is not just mine, but it is also the works of Peter Lei
and Michael Tuexen. They both are my two key other developers
working on the project.. and they need ata-boy's too:
****
peterlei@cisco.com
tuexen@fh-muenster.de
****
I did do a make sysent which updated the
syscall's and sysproto.. I hope that is correct... without
it you don't build since we have new syscalls for SCTP :-0

So go out and look at the NOTES, add
option SCTP (make sure inet and inet6 are present too)
and play with SCTP.

I will see about comitting some test tools I have after I
figure out where I should place them. I also have a
lib (libsctp.a) that adds some of the missing socketapi
functions that I need to put into lib's.. I will talk
to George about this :-)

There may still be some 64 bit issues in here, none of
us have a 64 bit processor to test with yet.. Michael
may have a MAC but thats another beast too..

If you have a mac and want to use SCTP contact Michael
he maintains a web site with a loadable module with
this code :-)

Reviewed by: gnn
Approved by: gnn
H A Dsctp_uio.h163953 Fri Nov 03 13:23:16 MST 2006 rrs Ok, here it is, we finally add SCTP to current. Note that this
work is not just mine, but it is also the works of Peter Lei
and Michael Tuexen. They both are my two key other developers
working on the project.. and they need ata-boy's too:
****
peterlei@cisco.com
tuexen@fh-muenster.de
****
I did do a make sysent which updated the
syscall's and sysproto.. I hope that is correct... without
it you don't build since we have new syscalls for SCTP :-0

So go out and look at the NOTES, add
option SCTP (make sure inet and inet6 are present too)
and play with SCTP.

I will see about comitting some test tools I have after I
figure out where I should place them. I also have a
lib (libsctp.a) that adds some of the missing socketapi
functions that I need to put into lib's.. I will talk
to George about this :-)

There may still be some 64 bit issues in here, none of
us have a 64 bit processor to test with yet.. Michael
may have a MAC but thats another beast too..

If you have a mac and want to use SCTP contact Michael
he maintains a web site with a loadable module with
this code :-)

Reviewed by: gnn
Approved by: gnn
H A Dsctp_var.h163953 Fri Nov 03 13:23:16 MST 2006 rrs Ok, here it is, we finally add SCTP to current. Note that this
work is not just mine, but it is also the works of Peter Lei
and Michael Tuexen. They both are my two key other developers
working on the project.. and they need ata-boy's too:
****
peterlei@cisco.com
tuexen@fh-muenster.de
****
I did do a make sysent which updated the
syscall's and sysproto.. I hope that is correct... without
it you don't build since we have new syscalls for SCTP :-0

So go out and look at the NOTES, add
option SCTP (make sure inet and inet6 are present too)
and play with SCTP.

I will see about comitting some test tools I have after I
figure out where I should place them. I also have a
lib (libsctp.a) that adds some of the missing socketapi
functions that I need to put into lib's.. I will talk
to George about this :-)

There may still be some 64 bit issues in here, none of
us have a 64 bit processor to test with yet.. Michael
may have a MAC but thats another beast too..

If you have a mac and want to use SCTP contact Michael
he maintains a web site with a loadable module with
this code :-)

Reviewed by: gnn
Approved by: gnn
H A Dsctputil.h163953 Fri Nov 03 13:23:16 MST 2006 rrs Ok, here it is, we finally add SCTP to current. Note that this
work is not just mine, but it is also the works of Peter Lei
and Michael Tuexen. They both are my two key other developers
working on the project.. and they need ata-boy's too:
****
peterlei@cisco.com
tuexen@fh-muenster.de
****
I did do a make sysent which updated the
syscall's and sysproto.. I hope that is correct... without
it you don't build since we have new syscalls for SCTP :-0

So go out and look at the NOTES, add
option SCTP (make sure inet and inet6 are present too)
and play with SCTP.

I will see about comitting some test tools I have after I
figure out where I should place them. I also have a
lib (libsctp.a) that adds some of the missing socketapi
functions that I need to put into lib's.. I will talk
to George about this :-)

There may still be some 64 bit issues in here, none of
us have a 64 bit processor to test with yet.. Michael
may have a MAC but thats another beast too..

If you have a mac and want to use SCTP contact Michael
he maintains a web site with a loadable module with
this code :-)

Reviewed by: gnn
Approved by: gnn
/freebsd-10.1-release/sys/netinet6/
H A Dsctp6_var.h163953 Fri Nov 03 13:23:16 MST 2006 rrs Ok, here it is, we finally add SCTP to current. Note that this
work is not just mine, but it is also the works of Peter Lei
and Michael Tuexen. They both are my two key other developers
working on the project.. and they need ata-boy's too:
****
peterlei@cisco.com
tuexen@fh-muenster.de
****
I did do a make sysent which updated the
syscall's and sysproto.. I hope that is correct... without
it you don't build since we have new syscalls for SCTP :-0

So go out and look at the NOTES, add
option SCTP (make sure inet and inet6 are present too)
and play with SCTP.

I will see about comitting some test tools I have after I
figure out where I should place them. I also have a
lib (libsctp.a) that adds some of the missing socketapi
functions that I need to put into lib's.. I will talk
to George about this :-)

There may still be some 64 bit issues in here, none of
us have a 64 bit processor to test with yet.. Michael
may have a MAC but thats another beast too..

If you have a mac and want to use SCTP contact Michael
he maintains a web site with a loadable module with
this code :-)

Reviewed by: gnn
Approved by: gnn
H A Din6_proto.cdiff 163953 Fri Nov 03 13:23:16 MST 2006 rrs Ok, here it is, we finally add SCTP to current. Note that this
work is not just mine, but it is also the works of Peter Lei
and Michael Tuexen. They both are my two key other developers
working on the project.. and they need ata-boy's too:
****
peterlei@cisco.com
tuexen@fh-muenster.de
****
I did do a make sysent which updated the
syscall's and sysproto.. I hope that is correct... without
it you don't build since we have new syscalls for SCTP :-0

So go out and look at the NOTES, add
option SCTP (make sure inet and inet6 are present too)
and play with SCTP.

I will see about comitting some test tools I have after I
figure out where I should place them. I also have a
lib (libsctp.a) that adds some of the missing socketapi
functions that I need to put into lib's.. I will talk
to George about this :-)

There may still be some 64 bit issues in here, none of
us have a 64 bit processor to test with yet.. Michael
may have a MAC but thats another beast too..

If you have a mac and want to use SCTP contact Michael
he maintains a web site with a loadable module with
this code :-)

Reviewed by: gnn
Approved by: gnn
/freebsd-10.1-release/sys/kern/
H A Dsystrace_args.cdiff 163953 Fri Nov 03 13:23:16 MST 2006 rrs Ok, here it is, we finally add SCTP to current. Note that this
work is not just mine, but it is also the works of Peter Lei
and Michael Tuexen. They both are my two key other developers
working on the project.. and they need ata-boy's too:
****
peterlei@cisco.com
tuexen@fh-muenster.de
****
I did do a make sysent which updated the
syscall's and sysproto.. I hope that is correct... without
it you don't build since we have new syscalls for SCTP :-0

So go out and look at the NOTES, add
option SCTP (make sure inet and inet6 are present too)
and play with SCTP.

I will see about comitting some test tools I have after I
figure out where I should place them. I also have a
lib (libsctp.a) that adds some of the missing socketapi
functions that I need to put into lib's.. I will talk
to George about this :-)

There may still be some 64 bit issues in here, none of
us have a 64 bit processor to test with yet.. Michael
may have a MAC but thats another beast too..

If you have a mac and want to use SCTP contact Michael
he maintains a web site with a loadable module with
this code :-)

Reviewed by: gnn
Approved by: gnn
/freebsd-10.1-release/sys/sys/
H A Dsocket.hdiff 163953 Fri Nov 03 13:23:16 MST 2006 rrs Ok, here it is, we finally add SCTP to current. Note that this
work is not just mine, but it is also the works of Peter Lei
and Michael Tuexen. They both are my two key other developers
working on the project.. and they need ata-boy's too:
****
peterlei@cisco.com
tuexen@fh-muenster.de
****
I did do a make sysent which updated the
syscall's and sysproto.. I hope that is correct... without
it you don't build since we have new syscalls for SCTP :-0

So go out and look at the NOTES, add
option SCTP (make sure inet and inet6 are present too)
and play with SCTP.

I will see about comitting some test tools I have after I
figure out where I should place them. I also have a
lib (libsctp.a) that adds some of the missing socketapi
functions that I need to put into lib's.. I will talk
to George about this :-)

There may still be some 64 bit issues in here, none of
us have a 64 bit processor to test with yet.. Michael
may have a MAC but thats another beast too..

If you have a mac and want to use SCTP contact Michael
he maintains a web site with a loadable module with
this code :-)

Reviewed by: gnn
Approved by: gnn

Completed in 467 milliseconds

12