Searched hist:1000 (Results 1 - 25 of 413) sorted by relevance
/freebsd-10.3-release/sys/dev/mii/ | ||
H A D | nsgphyreg.h | 76479 Fri May 11 19:56:39 MDT 2001 wpaul Add support for gigabit ethernet cards based on the NatSemi DP83820 and DP83821 gigabit ethernet MAC chips and the NatSemi DP83861 10/100/1000 copper PHY. There are a whole bunch of very low cost cards available with this chipset selling for $150USD or less. This includes the SMC9462TX, D-Link DGE-500T, Asante GigaNIX 1000TA and 1000TPC, and a couple cards from Addtron. This chip supports TCP/IP checksum offload, VLAN tagging/insertion. 2048-bit multicast filter, jumbograms and has 8K TX and 32K RX FIFOs. I have not done serious performance testing with this driver. I know it works, and I want it under CVS control so I can keep tabs on it. Note that there's no serious mutex stuff in here yet either: I need to talk more with jhb to figure out the right way to do this. That said, I don't think there will be any problems. This driver should also work on the alpha. It's not turned on in GENERIC. 76479 Fri May 11 19:56:39 MDT 2001 wpaul Add support for gigabit ethernet cards based on the NatSemi DP83820 and DP83821 gigabit ethernet MAC chips and the NatSemi DP83861 10/100/1000 copper PHY. There are a whole bunch of very low cost cards available with this chipset selling for $150USD or less. This includes the SMC9462TX, D-Link DGE-500T, Asante GigaNIX 1000TA and 1000TPC, and a couple cards from Addtron. This chip supports TCP/IP checksum offload, VLAN tagging/insertion. 2048-bit multicast filter, jumbograms and has 8K TX and 32K RX FIFOs. I have not done serious performance testing with this driver. I know it works, and I want it under CVS control so I can keep tabs on it. Note that there's no serious mutex stuff in here yet either: I need to talk more with jhb to figure out the right way to do this. That said, I don't think there will be any problems. This driver should also work on the alpha. It's not turned on in GENERIC. 76479 Fri May 11 19:56:39 MDT 2001 wpaul Add support for gigabit ethernet cards based on the NatSemi DP83820 and DP83821 gigabit ethernet MAC chips and the NatSemi DP83861 10/100/1000 copper PHY. There are a whole bunch of very low cost cards available with this chipset selling for $150USD or less. This includes the SMC9462TX, D-Link DGE-500T, Asante GigaNIX 1000TA and 1000TPC, and a couple cards from Addtron. This chip supports TCP/IP checksum offload, VLAN tagging/insertion. 2048-bit multicast filter, jumbograms and has 8K TX and 32K RX FIFOs. I have not done serious performance testing with this driver. I know it works, and I want it under CVS control so I can keep tabs on it. Note that there's no serious mutex stuff in here yet either: I need to talk more with jhb to figure out the right way to do this. That said, I don't think there will be any problems. This driver should also work on the alpha. It's not turned on in GENERIC. |
H A D | xmphyreg.h | diff 77078 Wed May 23 22:10:55 MDT 2001 wpaul Tweak the xmphy driver a little bit based on something I learned about the built-in 1000baseX interface in the Level 1 LXT1001 chip. The Level 1 PHY comes up with the isolate bit in the control register set by default, but it also has the autonegotiate bit set. When you tell the xmphy driver to select IFM_AUTO mode, it sees that the autoneg bit is already on, and thus doesn't bother updating the control register. However this means that the isolate bit is never turned off (unless you manually select 1000baseSX full or half duplex mode, which does result in the control register being modified and the ISO bit being turned off). This subtle and unusual behavioral difference stopped me from being able to receive packets on the SMC9462TX card for several days, since isolating the PHY disconnects it from the MAC's data interface. The fix is to omit the 'is the autoneg big set?' test, since it doesn't really provide much of an optimization anyway. This commit also updates the xmphy driver to support the Jato/Level 1 internal PHY. (I'm not sure how Jato Technologies is related to Level 1: all I know is the OUI from the PHY ID registers maps to Jato in the OUI database.) This will be used once I add the if_lge driver to support the LXT10010 chip. diff 77078 Wed May 23 22:10:55 MDT 2001 wpaul Tweak the xmphy driver a little bit based on something I learned about the built-in 1000baseX interface in the Level 1 LXT1001 chip. The Level 1 PHY comes up with the isolate bit in the control register set by default, but it also has the autonegotiate bit set. When you tell the xmphy driver to select IFM_AUTO mode, it sees that the autoneg bit is already on, and thus doesn't bother updating the control register. However this means that the isolate bit is never turned off (unless you manually select 1000baseSX full or half duplex mode, which does result in the control register being modified and the ISO bit being turned off). This subtle and unusual behavioral difference stopped me from being able to receive packets on the SMC9462TX card for several days, since isolating the PHY disconnects it from the MAC's data interface. The fix is to omit the 'is the autoneg big set?' test, since it doesn't really provide much of an optimization anyway. This commit also updates the xmphy driver to support the Jato/Level 1 internal PHY. (I'm not sure how Jato Technologies is related to Level 1: all I know is the OUI from the PHY ID registers maps to Jato in the OUI database.) This will be used once I add the if_lge driver to support the LXT10010 chip. 59477 Sat Apr 22 01:58:18 MDT 2000 wpaul Add PHY drivers for the XMAC II's internal PHY and the Broadcom BCM5400 1000baseTX PHY. These will be used by the SysKonnect gigabit ethernet driver shortly. |
/freebsd-10.3-release/sys/modules/nge/ | ||
H A D | Makefile | 76479 Fri May 11 19:56:39 MDT 2001 wpaul Add support for gigabit ethernet cards based on the NatSemi DP83820 and DP83821 gigabit ethernet MAC chips and the NatSemi DP83861 10/100/1000 copper PHY. There are a whole bunch of very low cost cards available with this chipset selling for $150USD or less. This includes the SMC9462TX, D-Link DGE-500T, Asante GigaNIX 1000TA and 1000TPC, and a couple cards from Addtron. This chip supports TCP/IP checksum offload, VLAN tagging/insertion. 2048-bit multicast filter, jumbograms and has 8K TX and 32K RX FIFOs. I have not done serious performance testing with this driver. I know it works, and I want it under CVS control so I can keep tabs on it. Note that there's no serious mutex stuff in here yet either: I need to talk more with jhb to figure out the right way to do this. That said, I don't think there will be any problems. This driver should also work on the alpha. It's not turned on in GENERIC. 76479 Fri May 11 19:56:39 MDT 2001 wpaul Add support for gigabit ethernet cards based on the NatSemi DP83820 and DP83821 gigabit ethernet MAC chips and the NatSemi DP83861 10/100/1000 copper PHY. There are a whole bunch of very low cost cards available with this chipset selling for $150USD or less. This includes the SMC9462TX, D-Link DGE-500T, Asante GigaNIX 1000TA and 1000TPC, and a couple cards from Addtron. This chip supports TCP/IP checksum offload, VLAN tagging/insertion. 2048-bit multicast filter, jumbograms and has 8K TX and 32K RX FIFOs. I have not done serious performance testing with this driver. I know it works, and I want it under CVS control so I can keep tabs on it. Note that there's no serious mutex stuff in here yet either: I need to talk more with jhb to figure out the right way to do this. That said, I don't think there will be any problems. This driver should also work on the alpha. It's not turned on in GENERIC. 76479 Fri May 11 19:56:39 MDT 2001 wpaul Add support for gigabit ethernet cards based on the NatSemi DP83820 and DP83821 gigabit ethernet MAC chips and the NatSemi DP83861 10/100/1000 copper PHY. There are a whole bunch of very low cost cards available with this chipset selling for $150USD or less. This includes the SMC9462TX, D-Link DGE-500T, Asante GigaNIX 1000TA and 1000TPC, and a couple cards from Addtron. This chip supports TCP/IP checksum offload, VLAN tagging/insertion. 2048-bit multicast filter, jumbograms and has 8K TX and 32K RX FIFOs. I have not done serious performance testing with this driver. I know it works, and I want it under CVS control so I can keep tabs on it. Note that there's no serious mutex stuff in here yet either: I need to talk more with jhb to figure out the right way to do this. That said, I don't think there will be any problems. This driver should also work on the alpha. It's not turned on in GENERIC. |
/freebsd-10.3-release/contrib/ipfilter/ | ||
H A D | WhatsNew50.txt | 254219 Sun Aug 11 14:35:57 MDT 2013 cy Import IP-Filter 5.1.2 into vendor branches using the existing license that the current version of IP-Filter in FreeBSD is under as per email received from Darren Reed on Mon, 08 Jul 2013 23:54:16 +1000. Approved by: glebius (Mentor), Darren Reed <darrenr@reed.wattle.id.au> |
H A D | arc4random.c | 254219 Sun Aug 11 14:35:57 MDT 2013 cy Import IP-Filter 5.1.2 into vendor branches using the existing license that the current version of IP-Filter in FreeBSD is under as per email received from Darren Reed on Mon, 08 Jul 2013 23:54:16 +1000. Approved by: glebius (Mentor), Darren Reed <darrenr@reed.wattle.id.au> |
H A D | ip_dstlist.c | 254219 Sun Aug 11 14:35:57 MDT 2013 cy Import IP-Filter 5.1.2 into vendor branches using the existing license that the current version of IP-Filter in FreeBSD is under as per email received from Darren Reed on Mon, 08 Jul 2013 23:54:16 +1000. Approved by: glebius (Mentor), Darren Reed <darrenr@reed.wattle.id.au> |
H A D | ip_dstlist.h | 254219 Sun Aug 11 14:35:57 MDT 2013 cy Import IP-Filter 5.1.2 into vendor branches using the existing license that the current version of IP-Filter in FreeBSD is under as per email received from Darren Reed on Mon, 08 Jul 2013 23:54:16 +1000. Approved by: glebius (Mentor), Darren Reed <darrenr@reed.wattle.id.au> |
H A D | ip_fil_compat.c | 254219 Sun Aug 11 14:35:57 MDT 2013 cy Import IP-Filter 5.1.2 into vendor branches using the existing license that the current version of IP-Filter in FreeBSD is under as per email received from Darren Reed on Mon, 08 Jul 2013 23:54:16 +1000. Approved by: glebius (Mentor), Darren Reed <darrenr@reed.wattle.id.au> |
H A D | ipf_rb.h | 254219 Sun Aug 11 14:35:57 MDT 2013 cy Import IP-Filter 5.1.2 into vendor branches using the existing license that the current version of IP-Filter in FreeBSD is under as per email received from Darren Reed on Mon, 08 Jul 2013 23:54:16 +1000. Approved by: glebius (Mentor), Darren Reed <darrenr@reed.wattle.id.au> |
/freebsd-10.3-release/contrib/ipfilter/lib/ | ||
H A D | allocmbt.c | 254219 Sun Aug 11 14:35:57 MDT 2013 cy Import IP-Filter 5.1.2 into vendor branches using the existing license that the current version of IP-Filter in FreeBSD is under as per email received from Darren Reed on Mon, 08 Jul 2013 23:54:16 +1000. Approved by: glebius (Mentor), Darren Reed <darrenr@reed.wattle.id.au> |
H A D | assigndefined.c | 254219 Sun Aug 11 14:35:57 MDT 2013 cy Import IP-Filter 5.1.2 into vendor branches using the existing license that the current version of IP-Filter in FreeBSD is under as per email received from Darren Reed on Mon, 08 Jul 2013 23:54:16 +1000. Approved by: glebius (Mentor), Darren Reed <darrenr@reed.wattle.id.au> |
H A D | connecttcp.c | 254219 Sun Aug 11 14:35:57 MDT 2013 cy Import IP-Filter 5.1.2 into vendor branches using the existing license that the current version of IP-Filter in FreeBSD is under as per email received from Darren Reed on Mon, 08 Jul 2013 23:54:16 +1000. Approved by: glebius (Mentor), Darren Reed <darrenr@reed.wattle.id.au> |
H A D | dupmbt.c | 254219 Sun Aug 11 14:35:57 MDT 2013 cy Import IP-Filter 5.1.2 into vendor branches using the existing license that the current version of IP-Filter in FreeBSD is under as per email received from Darren Reed on Mon, 08 Jul 2013 23:54:16 +1000. Approved by: glebius (Mentor), Darren Reed <darrenr@reed.wattle.id.au> |
H A D | familyname.c | 254219 Sun Aug 11 14:35:57 MDT 2013 cy Import IP-Filter 5.1.2 into vendor branches using the existing license that the current version of IP-Filter in FreeBSD is under as per email received from Darren Reed on Mon, 08 Jul 2013 23:54:16 +1000. Approved by: glebius (Mentor), Darren Reed <darrenr@reed.wattle.id.au> |
H A D | findword.c | 254219 Sun Aug 11 14:35:57 MDT 2013 cy Import IP-Filter 5.1.2 into vendor branches using the existing license that the current version of IP-Filter in FreeBSD is under as per email received from Darren Reed on Mon, 08 Jul 2013 23:54:16 +1000. Approved by: glebius (Mentor), Darren Reed <darrenr@reed.wattle.id.au> |
H A D | freembt.c | 254219 Sun Aug 11 14:35:57 MDT 2013 cy Import IP-Filter 5.1.2 into vendor branches using the existing license that the current version of IP-Filter in FreeBSD is under as per email received from Darren Reed on Mon, 08 Jul 2013 23:54:16 +1000. Approved by: glebius (Mentor), Darren Reed <darrenr@reed.wattle.id.au> |
H A D | ftov.c | 254219 Sun Aug 11 14:35:57 MDT 2013 cy Import IP-Filter 5.1.2 into vendor branches using the existing license that the current version of IP-Filter in FreeBSD is under as per email received from Darren Reed on Mon, 08 Jul 2013 23:54:16 +1000. Approved by: glebius (Mentor), Darren Reed <darrenr@reed.wattle.id.au> |
H A D | geticmptype.c | 254219 Sun Aug 11 14:35:57 MDT 2013 cy Import IP-Filter 5.1.2 into vendor branches using the existing license that the current version of IP-Filter in FreeBSD is under as per email received from Darren Reed on Mon, 08 Jul 2013 23:54:16 +1000. Approved by: glebius (Mentor), Darren Reed <darrenr@reed.wattle.id.au> |
H A D | icmptypename.c | 254219 Sun Aug 11 14:35:57 MDT 2013 cy Import IP-Filter 5.1.2 into vendor branches using the existing license that the current version of IP-Filter in FreeBSD is under as per email received from Darren Reed on Mon, 08 Jul 2013 23:54:16 +1000. Approved by: glebius (Mentor), Darren Reed <darrenr@reed.wattle.id.au> |
H A D | icmptypes.c | 254219 Sun Aug 11 14:35:57 MDT 2013 cy Import IP-Filter 5.1.2 into vendor branches using the existing license that the current version of IP-Filter in FreeBSD is under as per email received from Darren Reed on Mon, 08 Jul 2013 23:54:16 +1000. Approved by: glebius (Mentor), Darren Reed <darrenr@reed.wattle.id.au> |
H A D | interror.c | 254219 Sun Aug 11 14:35:57 MDT 2013 cy Import IP-Filter 5.1.2 into vendor branches using the existing license that the current version of IP-Filter in FreeBSD is under as per email received from Darren Reed on Mon, 08 Jul 2013 23:54:16 +1000. Approved by: glebius (Mentor), Darren Reed <darrenr@reed.wattle.id.au> |
H A D | ipf_perror.c | 254219 Sun Aug 11 14:35:57 MDT 2013 cy Import IP-Filter 5.1.2 into vendor branches using the existing license that the current version of IP-Filter in FreeBSD is under as per email received from Darren Reed on Mon, 08 Jul 2013 23:54:16 +1000. Approved by: glebius (Mentor), Darren Reed <darrenr@reed.wattle.id.au> |
H A D | load_dstlist.c | 254219 Sun Aug 11 14:35:57 MDT 2013 cy Import IP-Filter 5.1.2 into vendor branches using the existing license that the current version of IP-Filter in FreeBSD is under as per email received from Darren Reed on Mon, 08 Jul 2013 23:54:16 +1000. Approved by: glebius (Mentor), Darren Reed <darrenr@reed.wattle.id.au> |
H A D | load_dstlistnode.c | 254219 Sun Aug 11 14:35:57 MDT 2013 cy Import IP-Filter 5.1.2 into vendor branches using the existing license that the current version of IP-Filter in FreeBSD is under as per email received from Darren Reed on Mon, 08 Jul 2013 23:54:16 +1000. Approved by: glebius (Mentor), Darren Reed <darrenr@reed.wattle.id.au> |
H A D | mb_hexdump.c | 254219 Sun Aug 11 14:35:57 MDT 2013 cy Import IP-Filter 5.1.2 into vendor branches using the existing license that the current version of IP-Filter in FreeBSD is under as per email received from Darren Reed on Mon, 08 Jul 2013 23:54:16 +1000. Approved by: glebius (Mentor), Darren Reed <darrenr@reed.wattle.id.au> |
Completed in 200 milliseconds