Searched +hist:6 +hist:c49f359 (Results 1 - 1 of 1) sorted by relevance
/linux-master/ | ||
H A D | Makefile | diff 6d3d638d Wed Oct 04 06:48:36 MDT 2023 Björn Töpel <bjorn@rivosinc.com> kbuild: Let builtin have precedence over modules for kselftest-merge The kselftest-merge target walks all kselftests configs, and merges them. However, builtin does not have precedence over modules. This breaks some of the tests, e.g.: $ grep CONFIG_NF_NAT tools/testing/selftests/{bpf,net}/config tools/testing/selftests/bpf/config:CONFIG_NF_NAT=y tools/testing/selftests/net/config:CONFIG_NF_NAT=m Here, the net config will set NF_NAT to module, which makes it clunky to run the BPF tests. Add '-y' to scripts/kconfig/merge_config.sh. Signed-off-by: Björn Töpel <bjorn@rivosinc.com> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org> diff 6eaae198 Sun Jul 23 16:24:10 MDT 2023 Linus Torvalds <torvalds@linux-foundation.org> Linux 6.5-rc3 diff 6a8f57ae Sun Apr 16 16:23:53 MDT 2023 Linus Torvalds <torvalds@linux-foundation.org> Linux 6.3-rc7 diff 6ae4b986 Thu Dec 22 09:25:34 MST 2022 Masahiro Yamada <masahiroy@kernel.org> kbuild: allow to combine multiple V= levels Commit a6de553da01c ("kbuild: Allow to combine multiple W= levels") supported W=123 to enable all the extra warning groups. I think a similar idea is applicable to the V= option. V=1 echos the whole command V=2 prints the reason for rebuilding These are orthogonal, and can be enabled at the same time. This commit supports V=12 to enable both of them. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Tested-by: Nicolas Schier <nicolas@fjasle.eu> Reviewed-by: Nicolas Schier <nicolas@fjasle.eu> diff 6d796c50 Sun Jan 29 14:59:43 MST 2023 Linus Torvalds <torvalds@linux-foundation.org> Linux 6.2-rc6 diff f73edc89 Sat Sep 24 12:19:13 MDT 2022 Masahiro Yamada <masahiroy@kernel.org> kbuild: unify two modpost invocations Currently, modpost is executed twice; first for vmlinux, second for modules. This commit merges them. Current build flow ================== 1) build obj-y and obj-m objects 2) link vmlinux.o 3) modpost for vmlinux 4) link vmlinux 5) modpost for modules 6) link modules (*.ko) The build steps 1) through 6) are serialized, that is, modules are built after vmlinux. You do not get benefits of parallel builds when scripts/link-vmlinux.sh is being run. New build flow ============== 1) build obj-y and obj-m objects 2) link vmlinux.o 3) modpost for vmlinux and modules 4a) link vmlinux 4b) link modules (*.ko) In the new build flow, modpost is invoked just once. vmlinux and modules are built in parallel. One exception is CONFIG_DEBUG_INFO_BTF_MODULES=y, where modules depend on vmlinux. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Tested-by: Nick Desaulniers <ndesaulniers@google.com> Reviewed-by: Nicolas Schier <nicolas@fjasle.eu> diff f73edc89 Sat Sep 24 12:19:13 MDT 2022 Masahiro Yamada <masahiroy@kernel.org> kbuild: unify two modpost invocations Currently, modpost is executed twice; first for vmlinux, second for modules. This commit merges them. Current build flow ================== 1) build obj-y and obj-m objects 2) link vmlinux.o 3) modpost for vmlinux 4) link vmlinux 5) modpost for modules 6) link modules (*.ko) The build steps 1) through 6) are serialized, that is, modules are built after vmlinux. You do not get benefits of parallel builds when scripts/link-vmlinux.sh is being run. New build flow ============== 1) build obj-y and obj-m objects 2) link vmlinux.o 3) modpost for vmlinux and modules 4a) link vmlinux 4b) link modules (*.ko) In the new build flow, modpost is invoked just once. vmlinux and modules are built in parallel. One exception is CONFIG_DEBUG_INFO_BTF_MODULES=y, where modules depend on vmlinux. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Tested-by: Nick Desaulniers <ndesaulniers@google.com> Reviewed-by: Nicolas Schier <nicolas@fjasle.eu> diff 89245600 Thu Sep 08 15:54:47 MDT 2022 Sami Tolvanen <samitolvanen@google.com> cfi: Switch to -fsanitize=kcfi Switch from Clang's original forward-edge control-flow integrity implementation to -fsanitize=kcfi, which is better suited for the kernel, as it doesn't require LTO, doesn't use a jump table that requires altering function references, and won't break cross-module function address equality. Signed-off-by: Sami Tolvanen <samitolvanen@google.com> Reviewed-by: Kees Cook <keescook@chromium.org> Tested-by: Kees Cook <keescook@chromium.org> Tested-by: Nathan Chancellor <nathan@kernel.org> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Tested-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Kees Cook <keescook@chromium.org> Link: https://lore.kernel.org/r/20220908215504.3686827-6-samitolvanen@google.com diff dcd68326 Tue Nov 02 23:22:13 MDT 2021 Linus Torvalds <torvalds@linux-foundation.org> Merge tag 'devicetree-for-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux Pull devicetree updates from Rob Herring: - Convert /reserved-memory bindings to schemas - Convert a bunch of NFC bindings to schemas - Convert bindings to schema: Xilinx USB, Freescale DDR controller, Arm CCI-400, UBlox Neo-6M, 1-Wire GPIO, MSI controller, ASpeed LPC, OMAP and Inside-Secure HWRNG, register-bit-led, OV5640, Silead GSL1680, Elan ekth3000, Marvell bluetooth, TI wlcore, TI bluetooth, ESP ESP8089, tlm,trusted-foundations, Microchip cap11xx, Ralink SoCs and boards, and TI sysc - New binding schemas for: msi-ranges, Aspeed UART routing controller, palmbus, Xylon LogiCVC display controller, Mediatek's MT7621 SDRAM memory controller, and Apple M1 PCIe host - Run schema checks for %.dtb targets - Improve build time when using DT_SCHEMA_FILES - Improve error message when dtschema is not found - Various doc reference fixes in MAINTAINERS - Convert architectures to common CPU h/w ID parsing function of_get_cpu_hwid(). - Allow for empty NUMA node IDs which may be hotplugged - Cleanup of __fdt_scan_reserved_mem() - Constify device_node parameters - Update dtc to upstream v1.6.1-19-g0a3a9d3449c8. Adds new checks 'node_name_vs_property_name' and 'interrupt_map'. - Enable dtc 'unit_address_format' warning by default - Fix unittest EXPECT text for gpio hog errors * tag 'devicetree-for-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (97 commits) dt-bindings: net: ti,bluetooth: Document default max-speed dt-bindings: pci: rcar-pci-ep: Document r8a7795 dt-bindings: net: qcom,ipa: IPA does support up to two iommus of/fdt: Remove of_scan_flat_dt() usage for __fdt_scan_reserved_mem() of: unittest: document intentional interrupt-map provider build warning of: unittest: fix EXPECT text for gpio hog errors of/unittest: Disable new dtc node_name_vs_property_name and interrupt_map warnings scripts/dtc: Update to upstream version v1.6.1-19-g0a3a9d3449c8 dt-bindings: arm: firmware: tlm,trusted-foundations: Convert txt bindings to yaml dt-bindings: display: tilcd: Fix endpoint addressing in example dt-bindings: input: microchip,cap11xx: Convert txt bindings to yaml dt-bindings: ufs: exynos-ufs: add exynosautov9 compatible dt-bindings: ufs: exynos-ufs: add io-coherency property dt-bindings: mips: convert Ralink SoCs and boards to schema dt-bindings: display: xilinx: Fix example with psgtr dt-bindings: net: nfc: nxp,pn544: Convert txt bindings to yaml dt-bindings: Add a help message when dtschema tools are missing dt-bindings: bus: ti-sysc: Update to use yaml binding dt-bindings: sram: Allow numbers in sram region node name dt-bindings: display: Document the Xylon LogiCVC display controller ... diff fc02cb2b Tue Nov 02 07:20:58 MDT 2021 Linus Torvalds <torvalds@linux-foundation.org> Merge tag 'net-next-for-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Remove socket skb caches - Add a SO_RESERVE_MEM socket op to forward allocate buffer space and avoid memory accounting overhead on each message sent - Introduce managed neighbor entries - added by control plane and resolved by the kernel for use in acceleration paths (BPF / XDP right now, HW offload users will benefit as well) - Make neighbor eviction on link down controllable by userspace to work around WiFi networks with bad roaming implementations - vrf: Rework interaction with netfilter/conntrack - fq_codel: implement L4S style ce_threshold_ect1 marking - sch: Eliminate unnecessary RCU waits in mini_qdisc_pair_swap() BPF: - Add support for new btf kind BTF_KIND_TAG, arbitrary type tagging as implemented in LLVM14 - Introduce bpf_get_branch_snapshot() to capture Last Branch Records - Implement variadic trace_printk helper - Add a new Bloomfilter map type - Track <8-byte scalar spill and refill - Access hw timestamp through BPF's __sk_buff - Disallow unprivileged BPF by default - Document BPF licensing Netfilter: - Introduce egress hook for looking at raw outgoing packets - Allow matching on and modifying inner headers / payload data - Add NFT_META_IFTYPE to match on the interface type either from ingress or egress Protocols: - Multi-Path TCP: - increase default max additional subflows to 2 - rework forward memory allocation - add getsockopts: MPTCP_INFO, MPTCP_TCPINFO, MPTCP_SUBFLOW_ADDRS - MCTP flow support allowing lower layer drivers to configure msg muxing as needed - Automatic Multicast Tunneling (AMT) driver based on RFC7450 - HSR support the redbox supervision frames (IEC-62439-3:2018) - Support for the ip6ip6 encapsulation of IOAM - Netlink interface for CAN-FD's Transmitter Delay Compensation - Support SMC-Rv2 eliminating the current same-subnet restriction, by exploiting the UDP encapsulation feature of RoCE adapters - TLS: add SM4 GCM/CCM crypto support - Bluetooth: initial support for link quality and audio/codec offload Driver APIs: - Add a batched interface for RX buffer allocation in AF_XDP buffer pool - ethtool: Add ability to control transceiver modules' power mode - phy: Introduce supported interfaces bitmap to express MAC capabilities and simplify PHY code - Drop rtnl_lock from DSA .port_fdb_{add,del} callbacks New drivers: - WiFi driver for Realtek 8852AE 802.11ax devices (rtw89) - Ethernet driver for ASIX AX88796C SPI device (x88796c) Drivers: - Broadcom PHYs - support 72165, 7712 16nm PHYs - support IDDQ-SR for additional power savings - PHY support for QCA8081, QCA9561 PHYs - NXP DPAA2: support for IRQ coalescing - NXP Ethernet (enetc): support for software TCP segmentation - Renesas Ethernet (ravb) - support DMAC and EMAC blocks of Gigabit-capable IP found on RZ/G2L SoC - Intel 100G Ethernet - support for eswitch offload of TC/OvS flow API, including offload of GRE, VxLAN, Geneve tunneling - support application device queues - ability to assign Rx and Tx queues to application threads - PTP and PPS (pulse-per-second) extensions - Broadcom Ethernet (bnxt) - devlink health reporting and device reload extensions - Mellanox Ethernet (mlx5) - offload macvlan interfaces - support HW offload of TC rules involving OVS internal ports - support HW-GRO and header/data split - support application device queues - Marvell OcteonTx2: - add XDP support for PF - add PTP support for VF - Qualcomm Ethernet switch (qca8k): support for QCA8328 - Realtek Ethernet DSA switch (rtl8366rb) - support bridge offload - support STP, fast aging, disabling address learning - support for Realtek RTL8365MB-VC, a 4+1 port 10M/100M/1GE switch - Mellanox Ethernet/IB switch (mlxsw) - multi-level qdisc hierarchy offload (e.g. RED, prio and shaping) - offload root TBF qdisc as port shaper - support multiple routing interface MAC address prefixes - support for IP-in-IP with IPv6 underlay - MediaTek WiFi (mt76) - mt7921 - ASPM, 6GHz, SDIO and testmode support - mt7915 - LED and TWT support - Qualcomm WiFi (ath11k) - include channel rx and tx time in survey dump statistics - support for 80P80 and 160 MHz bandwidths - support channel 2 in 6 GHz band - spectral scan support for QCN9074 - support for rx decapsulation offload (data frames in 802.3 format) - Qualcomm phone SoC WiFi (wcn36xx) - enable Idle Mode Power Save (IMPS) to reduce power consumption during idle - Bluetooth driver support for MediaTek MT7922 and MT7921 - Enable support for AOSP Bluetooth extension in Qualcomm WCN399x and Realtek 8822C/8852A - Microsoft vNIC driver (mana) - support hibernation and kexec - Google vNIC driver (gve) - support for jumbo frames - implement Rx page reuse Refactor: - Make all writes to netdev->dev_addr go thru helpers, so that we can add this address to the address rbtree and handle the updates - Various TCP cleanups and optimizations including improvements to CPU cache use - Simplify the gnet_stats, Qdisc stats' handling and remove qdisc->running sequence counter - Driver changes and API updates to address devlink locking deficiencies" * tag 'net-next-for-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2122 commits) Revert "net: avoid double accounting for pure zerocopy skbs" selftests: net: add arp_ndisc_evict_nocarrier net: ndisc: introduce ndisc_evict_nocarrier sysctl parameter net: arp: introduce arp_evict_nocarrier sysctl parameter libbpf: Deprecate AF_XDP support kbuild: Unify options for BTF generation for vmlinux and modules selftests/bpf: Add a testcase for 64-bit bounds propagation issue. bpf: Fix propagation of signed bounds from 64-bit min/max into 32-bit. bpf: Fix propagation of bounds from 64-bit min/max into 32-bit and var_off. net: vmxnet3: remove multiple false checks in vmxnet3_ethtool.c net: avoid double accounting for pure zerocopy skbs tcp: rename sk_wmem_free_skb netdevsim: fix uninit value in nsim_drv_configure_vfs() selftests/bpf: Fix also no-alu32 strobemeta selftest bpf: Add missing map_delete_elem method to bloom filter map selftests/bpf: Add bloom map success test for userspace calls bpf: Add alignment padding for "map_extra" + consolidate holes bpf: Bloom filter map naming fixups selftests/bpf: Add test cases for struct_ops prog bpf: Add dummy BPF STRUCT_OPS for test purpose ... diff fc02cb2b Tue Nov 02 07:20:58 MDT 2021 Linus Torvalds <torvalds@linux-foundation.org> Merge tag 'net-next-for-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Remove socket skb caches - Add a SO_RESERVE_MEM socket op to forward allocate buffer space and avoid memory accounting overhead on each message sent - Introduce managed neighbor entries - added by control plane and resolved by the kernel for use in acceleration paths (BPF / XDP right now, HW offload users will benefit as well) - Make neighbor eviction on link down controllable by userspace to work around WiFi networks with bad roaming implementations - vrf: Rework interaction with netfilter/conntrack - fq_codel: implement L4S style ce_threshold_ect1 marking - sch: Eliminate unnecessary RCU waits in mini_qdisc_pair_swap() BPF: - Add support for new btf kind BTF_KIND_TAG, arbitrary type tagging as implemented in LLVM14 - Introduce bpf_get_branch_snapshot() to capture Last Branch Records - Implement variadic trace_printk helper - Add a new Bloomfilter map type - Track <8-byte scalar spill and refill - Access hw timestamp through BPF's __sk_buff - Disallow unprivileged BPF by default - Document BPF licensing Netfilter: - Introduce egress hook for looking at raw outgoing packets - Allow matching on and modifying inner headers / payload data - Add NFT_META_IFTYPE to match on the interface type either from ingress or egress Protocols: - Multi-Path TCP: - increase default max additional subflows to 2 - rework forward memory allocation - add getsockopts: MPTCP_INFO, MPTCP_TCPINFO, MPTCP_SUBFLOW_ADDRS - MCTP flow support allowing lower layer drivers to configure msg muxing as needed - Automatic Multicast Tunneling (AMT) driver based on RFC7450 - HSR support the redbox supervision frames (IEC-62439-3:2018) - Support for the ip6ip6 encapsulation of IOAM - Netlink interface for CAN-FD's Transmitter Delay Compensation - Support SMC-Rv2 eliminating the current same-subnet restriction, by exploiting the UDP encapsulation feature of RoCE adapters - TLS: add SM4 GCM/CCM crypto support - Bluetooth: initial support for link quality and audio/codec offload Driver APIs: - Add a batched interface for RX buffer allocation in AF_XDP buffer pool - ethtool: Add ability to control transceiver modules' power mode - phy: Introduce supported interfaces bitmap to express MAC capabilities and simplify PHY code - Drop rtnl_lock from DSA .port_fdb_{add,del} callbacks New drivers: - WiFi driver for Realtek 8852AE 802.11ax devices (rtw89) - Ethernet driver for ASIX AX88796C SPI device (x88796c) Drivers: - Broadcom PHYs - support 72165, 7712 16nm PHYs - support IDDQ-SR for additional power savings - PHY support for QCA8081, QCA9561 PHYs - NXP DPAA2: support for IRQ coalescing - NXP Ethernet (enetc): support for software TCP segmentation - Renesas Ethernet (ravb) - support DMAC and EMAC blocks of Gigabit-capable IP found on RZ/G2L SoC - Intel 100G Ethernet - support for eswitch offload of TC/OvS flow API, including offload of GRE, VxLAN, Geneve tunneling - support application device queues - ability to assign Rx and Tx queues to application threads - PTP and PPS (pulse-per-second) extensions - Broadcom Ethernet (bnxt) - devlink health reporting and device reload extensions - Mellanox Ethernet (mlx5) - offload macvlan interfaces - support HW offload of TC rules involving OVS internal ports - support HW-GRO and header/data split - support application device queues - Marvell OcteonTx2: - add XDP support for PF - add PTP support for VF - Qualcomm Ethernet switch (qca8k): support for QCA8328 - Realtek Ethernet DSA switch (rtl8366rb) - support bridge offload - support STP, fast aging, disabling address learning - support for Realtek RTL8365MB-VC, a 4+1 port 10M/100M/1GE switch - Mellanox Ethernet/IB switch (mlxsw) - multi-level qdisc hierarchy offload (e.g. RED, prio and shaping) - offload root TBF qdisc as port shaper - support multiple routing interface MAC address prefixes - support for IP-in-IP with IPv6 underlay - MediaTek WiFi (mt76) - mt7921 - ASPM, 6GHz, SDIO and testmode support - mt7915 - LED and TWT support - Qualcomm WiFi (ath11k) - include channel rx and tx time in survey dump statistics - support for 80P80 and 160 MHz bandwidths - support channel 2 in 6 GHz band - spectral scan support for QCN9074 - support for rx decapsulation offload (data frames in 802.3 format) - Qualcomm phone SoC WiFi (wcn36xx) - enable Idle Mode Power Save (IMPS) to reduce power consumption during idle - Bluetooth driver support for MediaTek MT7922 and MT7921 - Enable support for AOSP Bluetooth extension in Qualcomm WCN399x and Realtek 8822C/8852A - Microsoft vNIC driver (mana) - support hibernation and kexec - Google vNIC driver (gve) - support for jumbo frames - implement Rx page reuse Refactor: - Make all writes to netdev->dev_addr go thru helpers, so that we can add this address to the address rbtree and handle the updates - Various TCP cleanups and optimizations including improvements to CPU cache use - Simplify the gnet_stats, Qdisc stats' handling and remove qdisc->running sequence counter - Driver changes and API updates to address devlink locking deficiencies" * tag 'net-next-for-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2122 commits) Revert "net: avoid double accounting for pure zerocopy skbs" selftests: net: add arp_ndisc_evict_nocarrier net: ndisc: introduce ndisc_evict_nocarrier sysctl parameter net: arp: introduce arp_evict_nocarrier sysctl parameter libbpf: Deprecate AF_XDP support kbuild: Unify options for BTF generation for vmlinux and modules selftests/bpf: Add a testcase for 64-bit bounds propagation issue. bpf: Fix propagation of signed bounds from 64-bit min/max into 32-bit. bpf: Fix propagation of bounds from 64-bit min/max into 32-bit and var_off. net: vmxnet3: remove multiple false checks in vmxnet3_ethtool.c net: avoid double accounting for pure zerocopy skbs tcp: rename sk_wmem_free_skb netdevsim: fix uninit value in nsim_drv_configure_vfs() selftests/bpf: Fix also no-alu32 strobemeta selftest bpf: Add missing map_delete_elem method to bloom filter map selftests/bpf: Add bloom map success test for userspace calls bpf: Add alignment padding for "map_extra" + consolidate holes bpf: Bloom filter map naming fixups selftests/bpf: Add test cases for struct_ops prog bpf: Add dummy BPF STRUCT_OPS for test purpose ... |
Completed in 1394 milliseconds