Searched +hist:5 +hist:e771905 (Results 1 - 3 of 3) sorted by relevance
/linux-master/include/linux/ | ||
H A D | compaction.h | diff ecd8b292 Fri May 19 06:39:55 MDT 2023 Johannes Weiner <hannes@cmpxchg.org> mm: compaction: remove compaction result helpers Patch series "mm: compaction: cleanups & simplifications". These compaction cleanups are split out from the huge page allocator series[1], as requested by reviewer feedback. [1] https://lore.kernel.org/linux-mm/20230418191313.268131-1-hannes@cmpxchg.org/ This patch (of 5): The compaction result helpers encode quirks that are specific to the allocator's retry logic. E.g. COMPACT_SUCCESS and COMPACT_COMPLETE actually represent failures that should be retried upon, and so on. I frequently found myself pulling up the helper implementation in order to understand and work on the retry logic. They're not quite clean abstractions; rather they split the retry logic into two locations. Remove the helpers and inline the checks. Then comment on the result interpretations directly where the decision making happens. Link: https://lkml.kernel.org/r/20230519123959.77335-1-hannes@cmpxchg.org Link: https://lkml.kernel.org/r/20230519123959.77335-2-hannes@cmpxchg.org Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Michal Hocko <mhocko@suse.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> diff facdaa91 Tue Aug 11 19:31:00 MDT 2020 Nitin Gupta <nigupta@nvidia.com> mm: proactive compaction For some applications, we need to allocate almost all memory as hugepages. However, on a running system, higher-order allocations can fail if the memory is fragmented. Linux kernel currently does on-demand compaction as we request more hugepages, but this style of compaction incurs very high latency. Experiments with one-time full memory compaction (followed by hugepage allocations) show that kernel is able to restore a highly fragmented memory state to a fairly compacted memory state within <1 sec for a 32G system. Such data suggests that a more proactive compaction can help us allocate a large fraction of memory as hugepages keeping allocation latencies low. For a more proactive compaction, the approach taken here is to define a new sysctl called 'vm.compaction_proactiveness' which dictates bounds for external fragmentation which kcompactd tries to maintain. The tunable takes a value in range [0, 100], with a default of 20. Note that a previous version of this patch [1] was found to introduce too many tunables (per-order extfrag{low, high}), but this one reduces them to just one sysctl. Also, the new tunable is an opaque value instead of asking for specific bounds of "external fragmentation", which would have been difficult to estimate. The internal interpretation of this opaque value allows for future fine-tuning. Currently, we use a simple translation from this tunable to [low, high] "fragmentation score" thresholds (low=100-proactiveness, high=low+10%). The score for a node is defined as weighted mean of per-zone external fragmentation. A zone's present_pages determines its weight. To periodically check per-node score, we reuse per-node kcompactd threads, which are woken up every 500 milliseconds to check the same. If a node's score exceeds its high threshold (as derived from user-provided proactiveness value), proactive compaction is started until its score reaches its low threshold value. By default, proactiveness is set to 20, which implies threshold values of low=80 and high=90. This patch is largely based on ideas from Michal Hocko [2]. See also the LWN article [3]. Performance data ================ System: x64_64, 1T RAM, 80 CPU threads. Kernel: 5.6.0-rc3 + this patch echo madvise | sudo tee /sys/kernel/mm/transparent_hugepage/enabled echo madvise | sudo tee /sys/kernel/mm/transparent_hugepage/defrag Before starting the driver, the system was fragmented from a userspace program that allocates all memory and then for each 2M aligned section, frees 3/4 of base pages using munmap. The workload is mainly anonymous userspace pages, which are easy to move around. I intentionally avoided unmovable pages in this test to see how much latency we incur when hugepage allocations hit direct compaction. 1. Kernel hugepage allocation latencies With the system in such a fragmented state, a kernel driver then allocates as many hugepages as possible and measures allocation latency: (all latency values are in microseconds) - With vanilla 5.6.0-rc3 percentile latency –––––––––– ––––––– 5 7894 10 9496 25 12561 30 15295 40 18244 50 21229 60 27556 75 30147 80 31047 90 32859 95 33799 Total 2M hugepages allocated = 383859 (749G worth of hugepages out of 762G total free => 98% of free memory could be allocated as hugepages) - With 5.6.0-rc3 + this patch, with proactiveness=20 sysctl -w vm.compaction_proactiveness=20 percentile latency –––––––––– ––––––– 5 2 10 2 25 3 30 3 40 3 50 4 60 4 75 4 80 4 90 5 95 429 Total 2M hugepages allocated = 384105 (750G worth of hugepages out of 762G total free => 98% of free memory could be allocated as hugepages) 2. JAVA heap allocation In this test, we first fragment memory using the same method as for (1). Then, we start a Java process with a heap size set to 700G and request the heap to be allocated with THP hugepages. We also set THP to madvise to allow hugepage backing of this heap. /usr/bin/time java -Xms700G -Xmx700G -XX:+UseTransparentHugePages -XX:+AlwaysPreTouch The above command allocates 700G of Java heap using hugepages. - With vanilla 5.6.0-rc3 17.39user 1666.48system 27:37.89elapsed - With 5.6.0-rc3 + this patch, with proactiveness=20 8.35user 194.58system 3:19.62elapsed Elapsed time remains around 3:15, as proactiveness is further increased. Note that proactive compaction happens throughout the runtime of these workloads. The situation of one-time compaction, sufficient to supply hugepages for following allocation stream, can probably happen for more extreme proactiveness values, like 80 or 90. In the above Java workload, proactiveness is set to 20. The test starts with a node's score of 80 or higher, depending on the delay between the fragmentation step and starting the benchmark, which gives more-or-less time for the initial round of compaction. As t he benchmark consumes hugepages, node's score quickly rises above the high threshold (90) and proactive compaction starts again, which brings down the score to the low threshold level (80). Repeat. bpftrace also confirms proactive compaction running 20+ times during the runtime of this Java benchmark. kcompactd threads consume 100% of one of the CPUs while it tries to bring a node's score within thresholds. Backoff behavior ================ Above workloads produce a memory state which is easy to compact. However, if memory is filled with unmovable pages, proactive compaction should essentially back off. To test this aspect: - Created a kernel driver that allocates almost all memory as hugepages followed by freeing first 3/4 of each hugepage. - Set proactiveness=40 - Note that proactive_compact_node() is deferred maximum number of times with HPAGE_FRAG_CHECK_INTERVAL_MSEC of wait between each check (=> ~30 seconds between retries). [1] https://patchwork.kernel.org/patch/11098289/ [2] https://lore.kernel.org/linux-mm/20161230131412.GI13301@dhcp22.suse.cz/ [3] https://lwn.net/Articles/817905/ Signed-off-by: Nitin Gupta <nigupta@nvidia.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Tested-by: Oleksandr Natalenko <oleksandr@redhat.com> Reviewed-by: Vlastimil Babka <vbabka@suse.cz> Reviewed-by: Khalid Aziz <khalid.aziz@oracle.com> Reviewed-by: Oleksandr Natalenko <oleksandr@redhat.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Khalid Aziz <khalid.aziz@oracle.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Matthew Wilcox <willy@infradead.org> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: David Rientjes <rientjes@google.com> Cc: Nitin Gupta <ngupta@nitingupta.dev> Cc: Oleksandr Natalenko <oleksandr@redhat.com> Link: http://lkml.kernel.org/r/20200616204527.19185-1-nigupta@nvidia.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> diff facdaa91 Tue Aug 11 19:31:00 MDT 2020 Nitin Gupta <nigupta@nvidia.com> mm: proactive compaction For some applications, we need to allocate almost all memory as hugepages. However, on a running system, higher-order allocations can fail if the memory is fragmented. Linux kernel currently does on-demand compaction as we request more hugepages, but this style of compaction incurs very high latency. Experiments with one-time full memory compaction (followed by hugepage allocations) show that kernel is able to restore a highly fragmented memory state to a fairly compacted memory state within <1 sec for a 32G system. Such data suggests that a more proactive compaction can help us allocate a large fraction of memory as hugepages keeping allocation latencies low. For a more proactive compaction, the approach taken here is to define a new sysctl called 'vm.compaction_proactiveness' which dictates bounds for external fragmentation which kcompactd tries to maintain. The tunable takes a value in range [0, 100], with a default of 20. Note that a previous version of this patch [1] was found to introduce too many tunables (per-order extfrag{low, high}), but this one reduces them to just one sysctl. Also, the new tunable is an opaque value instead of asking for specific bounds of "external fragmentation", which would have been difficult to estimate. The internal interpretation of this opaque value allows for future fine-tuning. Currently, we use a simple translation from this tunable to [low, high] "fragmentation score" thresholds (low=100-proactiveness, high=low+10%). The score for a node is defined as weighted mean of per-zone external fragmentation. A zone's present_pages determines its weight. To periodically check per-node score, we reuse per-node kcompactd threads, which are woken up every 500 milliseconds to check the same. If a node's score exceeds its high threshold (as derived from user-provided proactiveness value), proactive compaction is started until its score reaches its low threshold value. By default, proactiveness is set to 20, which implies threshold values of low=80 and high=90. This patch is largely based on ideas from Michal Hocko [2]. See also the LWN article [3]. Performance data ================ System: x64_64, 1T RAM, 80 CPU threads. Kernel: 5.6.0-rc3 + this patch echo madvise | sudo tee /sys/kernel/mm/transparent_hugepage/enabled echo madvise | sudo tee /sys/kernel/mm/transparent_hugepage/defrag Before starting the driver, the system was fragmented from a userspace program that allocates all memory and then for each 2M aligned section, frees 3/4 of base pages using munmap. The workload is mainly anonymous userspace pages, which are easy to move around. I intentionally avoided unmovable pages in this test to see how much latency we incur when hugepage allocations hit direct compaction. 1. Kernel hugepage allocation latencies With the system in such a fragmented state, a kernel driver then allocates as many hugepages as possible and measures allocation latency: (all latency values are in microseconds) - With vanilla 5.6.0-rc3 percentile latency –––––––––– ––––––– 5 7894 10 9496 25 12561 30 15295 40 18244 50 21229 60 27556 75 30147 80 31047 90 32859 95 33799 Total 2M hugepages allocated = 383859 (749G worth of hugepages out of 762G total free => 98% of free memory could be allocated as hugepages) - With 5.6.0-rc3 + this patch, with proactiveness=20 sysctl -w vm.compaction_proactiveness=20 percentile latency –––––––––– ––––––– 5 2 10 2 25 3 30 3 40 3 50 4 60 4 75 4 80 4 90 5 95 429 Total 2M hugepages allocated = 384105 (750G worth of hugepages out of 762G total free => 98% of free memory could be allocated as hugepages) 2. JAVA heap allocation In this test, we first fragment memory using the same method as for (1). Then, we start a Java process with a heap size set to 700G and request the heap to be allocated with THP hugepages. We also set THP to madvise to allow hugepage backing of this heap. /usr/bin/time java -Xms700G -Xmx700G -XX:+UseTransparentHugePages -XX:+AlwaysPreTouch The above command allocates 700G of Java heap using hugepages. - With vanilla 5.6.0-rc3 17.39user 1666.48system 27:37.89elapsed - With 5.6.0-rc3 + this patch, with proactiveness=20 8.35user 194.58system 3:19.62elapsed Elapsed time remains around 3:15, as proactiveness is further increased. Note that proactive compaction happens throughout the runtime of these workloads. The situation of one-time compaction, sufficient to supply hugepages for following allocation stream, can probably happen for more extreme proactiveness values, like 80 or 90. In the above Java workload, proactiveness is set to 20. The test starts with a node's score of 80 or higher, depending on the delay between the fragmentation step and starting the benchmark, which gives more-or-less time for the initial round of compaction. As t he benchmark consumes hugepages, node's score quickly rises above the high threshold (90) and proactive compaction starts again, which brings down the score to the low threshold level (80). Repeat. bpftrace also confirms proactive compaction running 20+ times during the runtime of this Java benchmark. kcompactd threads consume 100% of one of the CPUs while it tries to bring a node's score within thresholds. Backoff behavior ================ Above workloads produce a memory state which is easy to compact. However, if memory is filled with unmovable pages, proactive compaction should essentially back off. To test this aspect: - Created a kernel driver that allocates almost all memory as hugepages followed by freeing first 3/4 of each hugepage. - Set proactiveness=40 - Note that proactive_compact_node() is deferred maximum number of times with HPAGE_FRAG_CHECK_INTERVAL_MSEC of wait between each check (=> ~30 seconds between retries). [1] https://patchwork.kernel.org/patch/11098289/ [2] https://lore.kernel.org/linux-mm/20161230131412.GI13301@dhcp22.suse.cz/ [3] https://lwn.net/Articles/817905/ Signed-off-by: Nitin Gupta <nigupta@nvidia.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Tested-by: Oleksandr Natalenko <oleksandr@redhat.com> Reviewed-by: Vlastimil Babka <vbabka@suse.cz> Reviewed-by: Khalid Aziz <khalid.aziz@oracle.com> Reviewed-by: Oleksandr Natalenko <oleksandr@redhat.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Khalid Aziz <khalid.aziz@oracle.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Matthew Wilcox <willy@infradead.org> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: David Rientjes <rientjes@google.com> Cc: Nitin Gupta <ngupta@nitingupta.dev> Cc: Oleksandr Natalenko <oleksandr@redhat.com> Link: http://lkml.kernel.org/r/20200616204527.19185-1-nigupta@nvidia.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> diff facdaa91 Tue Aug 11 19:31:00 MDT 2020 Nitin Gupta <nigupta@nvidia.com> mm: proactive compaction For some applications, we need to allocate almost all memory as hugepages. However, on a running system, higher-order allocations can fail if the memory is fragmented. Linux kernel currently does on-demand compaction as we request more hugepages, but this style of compaction incurs very high latency. Experiments with one-time full memory compaction (followed by hugepage allocations) show that kernel is able to restore a highly fragmented memory state to a fairly compacted memory state within <1 sec for a 32G system. Such data suggests that a more proactive compaction can help us allocate a large fraction of memory as hugepages keeping allocation latencies low. For a more proactive compaction, the approach taken here is to define a new sysctl called 'vm.compaction_proactiveness' which dictates bounds for external fragmentation which kcompactd tries to maintain. The tunable takes a value in range [0, 100], with a default of 20. Note that a previous version of this patch [1] was found to introduce too many tunables (per-order extfrag{low, high}), but this one reduces them to just one sysctl. Also, the new tunable is an opaque value instead of asking for specific bounds of "external fragmentation", which would have been difficult to estimate. The internal interpretation of this opaque value allows for future fine-tuning. Currently, we use a simple translation from this tunable to [low, high] "fragmentation score" thresholds (low=100-proactiveness, high=low+10%). The score for a node is defined as weighted mean of per-zone external fragmentation. A zone's present_pages determines its weight. To periodically check per-node score, we reuse per-node kcompactd threads, which are woken up every 500 milliseconds to check the same. If a node's score exceeds its high threshold (as derived from user-provided proactiveness value), proactive compaction is started until its score reaches its low threshold value. By default, proactiveness is set to 20, which implies threshold values of low=80 and high=90. This patch is largely based on ideas from Michal Hocko [2]. See also the LWN article [3]. Performance data ================ System: x64_64, 1T RAM, 80 CPU threads. Kernel: 5.6.0-rc3 + this patch echo madvise | sudo tee /sys/kernel/mm/transparent_hugepage/enabled echo madvise | sudo tee /sys/kernel/mm/transparent_hugepage/defrag Before starting the driver, the system was fragmented from a userspace program that allocates all memory and then for each 2M aligned section, frees 3/4 of base pages using munmap. The workload is mainly anonymous userspace pages, which are easy to move around. I intentionally avoided unmovable pages in this test to see how much latency we incur when hugepage allocations hit direct compaction. 1. Kernel hugepage allocation latencies With the system in such a fragmented state, a kernel driver then allocates as many hugepages as possible and measures allocation latency: (all latency values are in microseconds) - With vanilla 5.6.0-rc3 percentile latency –––––––––– ––––––– 5 7894 10 9496 25 12561 30 15295 40 18244 50 21229 60 27556 75 30147 80 31047 90 32859 95 33799 Total 2M hugepages allocated = 383859 (749G worth of hugepages out of 762G total free => 98% of free memory could be allocated as hugepages) - With 5.6.0-rc3 + this patch, with proactiveness=20 sysctl -w vm.compaction_proactiveness=20 percentile latency –––––––––– ––––––– 5 2 10 2 25 3 30 3 40 3 50 4 60 4 75 4 80 4 90 5 95 429 Total 2M hugepages allocated = 384105 (750G worth of hugepages out of 762G total free => 98% of free memory could be allocated as hugepages) 2. JAVA heap allocation In this test, we first fragment memory using the same method as for (1). Then, we start a Java process with a heap size set to 700G and request the heap to be allocated with THP hugepages. We also set THP to madvise to allow hugepage backing of this heap. /usr/bin/time java -Xms700G -Xmx700G -XX:+UseTransparentHugePages -XX:+AlwaysPreTouch The above command allocates 700G of Java heap using hugepages. - With vanilla 5.6.0-rc3 17.39user 1666.48system 27:37.89elapsed - With 5.6.0-rc3 + this patch, with proactiveness=20 8.35user 194.58system 3:19.62elapsed Elapsed time remains around 3:15, as proactiveness is further increased. Note that proactive compaction happens throughout the runtime of these workloads. The situation of one-time compaction, sufficient to supply hugepages for following allocation stream, can probably happen for more extreme proactiveness values, like 80 or 90. In the above Java workload, proactiveness is set to 20. The test starts with a node's score of 80 or higher, depending on the delay between the fragmentation step and starting the benchmark, which gives more-or-less time for the initial round of compaction. As t he benchmark consumes hugepages, node's score quickly rises above the high threshold (90) and proactive compaction starts again, which brings down the score to the low threshold level (80). Repeat. bpftrace also confirms proactive compaction running 20+ times during the runtime of this Java benchmark. kcompactd threads consume 100% of one of the CPUs while it tries to bring a node's score within thresholds. Backoff behavior ================ Above workloads produce a memory state which is easy to compact. However, if memory is filled with unmovable pages, proactive compaction should essentially back off. To test this aspect: - Created a kernel driver that allocates almost all memory as hugepages followed by freeing first 3/4 of each hugepage. - Set proactiveness=40 - Note that proactive_compact_node() is deferred maximum number of times with HPAGE_FRAG_CHECK_INTERVAL_MSEC of wait between each check (=> ~30 seconds between retries). [1] https://patchwork.kernel.org/patch/11098289/ [2] https://lore.kernel.org/linux-mm/20161230131412.GI13301@dhcp22.suse.cz/ [3] https://lwn.net/Articles/817905/ Signed-off-by: Nitin Gupta <nigupta@nvidia.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Tested-by: Oleksandr Natalenko <oleksandr@redhat.com> Reviewed-by: Vlastimil Babka <vbabka@suse.cz> Reviewed-by: Khalid Aziz <khalid.aziz@oracle.com> Reviewed-by: Oleksandr Natalenko <oleksandr@redhat.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Khalid Aziz <khalid.aziz@oracle.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Matthew Wilcox <willy@infradead.org> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: David Rientjes <rientjes@google.com> Cc: Nitin Gupta <ngupta@nitingupta.dev> Cc: Oleksandr Natalenko <oleksandr@redhat.com> Link: http://lkml.kernel.org/r/20200616204527.19185-1-nigupta@nvidia.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> diff 5e1f0f09 Tue Mar 05 16:45:41 MST 2019 Mel Gorman <mgorman@techsingularity.net> mm, compaction: capture a page under direct compaction Compaction is inherently race-prone as a suitable page freed during compaction can be allocated by any parallel task. This patch uses a capture_control structure to isolate a page immediately when it is freed by a direct compactor in the slow path of the page allocator. The intent is to avoid redundant scanning. 5.0.0-rc1 5.0.0-rc1 selective-v3r17 capture-v3r19 Amean fault-both-1 0.00 ( 0.00%) 0.00 * 0.00%* Amean fault-both-3 2582.11 ( 0.00%) 2563.68 ( 0.71%) Amean fault-both-5 4500.26 ( 0.00%) 4233.52 ( 5.93%) Amean fault-both-7 5819.53 ( 0.00%) 6333.65 ( -8.83%) Amean fault-both-12 9321.18 ( 0.00%) 9759.38 ( -4.70%) Amean fault-both-18 9782.76 ( 0.00%) 10338.76 ( -5.68%) Amean fault-both-24 15272.81 ( 0.00%) 13379.55 * 12.40%* Amean fault-both-30 15121.34 ( 0.00%) 16158.25 ( -6.86%) Amean fault-both-32 18466.67 ( 0.00%) 18971.21 ( -2.73%) Latency is only moderately affected but the devil is in the details. A closer examination indicates that base page fault latency is reduced but latency of huge pages is increased as it takes creater care to succeed. Part of the "problem" is that allocation success rates are close to 100% even when under pressure and compaction gets harder 5.0.0-rc1 5.0.0-rc1 selective-v3r17 capture-v3r19 Percentage huge-3 96.70 ( 0.00%) 98.23 ( 1.58%) Percentage huge-5 96.99 ( 0.00%) 95.30 ( -1.75%) Percentage huge-7 94.19 ( 0.00%) 97.24 ( 3.24%) Percentage huge-12 94.95 ( 0.00%) 97.35 ( 2.53%) Percentage huge-18 96.74 ( 0.00%) 97.30 ( 0.58%) Percentage huge-24 97.07 ( 0.00%) 97.55 ( 0.50%) Percentage huge-30 95.69 ( 0.00%) 98.50 ( 2.95%) Percentage huge-32 96.70 ( 0.00%) 99.27 ( 2.65%) And scan rates are reduced as expected by 6% for the migration scanner and 29% for the free scanner indicating that there is less redundant work. Compaction migrate scanned 20815362 19573286 Compaction free scanned 16352612 11510663 [mgorman@techsingularity.net: remove redundant check] Link: http://lkml.kernel.org/r/20190201143853.GH9565@techsingularity.net Link: http://lkml.kernel.org/r/20190118175136.31341-23-mgorman@techsingularity.net Signed-off-by: Mel Gorman <mgorman@techsingularity.net> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Dan Carpenter <dan.carpenter@oracle.com> Cc: David Rientjes <rientjes@google.com> Cc: YueHaibing <yuehaibing@huawei.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> diff 5e1f0f09 Tue Mar 05 16:45:41 MST 2019 Mel Gorman <mgorman@techsingularity.net> mm, compaction: capture a page under direct compaction Compaction is inherently race-prone as a suitable page freed during compaction can be allocated by any parallel task. This patch uses a capture_control structure to isolate a page immediately when it is freed by a direct compactor in the slow path of the page allocator. The intent is to avoid redundant scanning. 5.0.0-rc1 5.0.0-rc1 selective-v3r17 capture-v3r19 Amean fault-both-1 0.00 ( 0.00%) 0.00 * 0.00%* Amean fault-both-3 2582.11 ( 0.00%) 2563.68 ( 0.71%) Amean fault-both-5 4500.26 ( 0.00%) 4233.52 ( 5.93%) Amean fault-both-7 5819.53 ( 0.00%) 6333.65 ( -8.83%) Amean fault-both-12 9321.18 ( 0.00%) 9759.38 ( -4.70%) Amean fault-both-18 9782.76 ( 0.00%) 10338.76 ( -5.68%) Amean fault-both-24 15272.81 ( 0.00%) 13379.55 * 12.40%* Amean fault-both-30 15121.34 ( 0.00%) 16158.25 ( -6.86%) Amean fault-both-32 18466.67 ( 0.00%) 18971.21 ( -2.73%) Latency is only moderately affected but the devil is in the details. A closer examination indicates that base page fault latency is reduced but latency of huge pages is increased as it takes creater care to succeed. Part of the "problem" is that allocation success rates are close to 100% even when under pressure and compaction gets harder 5.0.0-rc1 5.0.0-rc1 selective-v3r17 capture-v3r19 Percentage huge-3 96.70 ( 0.00%) 98.23 ( 1.58%) Percentage huge-5 96.99 ( 0.00%) 95.30 ( -1.75%) Percentage huge-7 94.19 ( 0.00%) 97.24 ( 3.24%) Percentage huge-12 94.95 ( 0.00%) 97.35 ( 2.53%) Percentage huge-18 96.74 ( 0.00%) 97.30 ( 0.58%) Percentage huge-24 97.07 ( 0.00%) 97.55 ( 0.50%) Percentage huge-30 95.69 ( 0.00%) 98.50 ( 2.95%) Percentage huge-32 96.70 ( 0.00%) 99.27 ( 2.65%) And scan rates are reduced as expected by 6% for the migration scanner and 29% for the free scanner indicating that there is less redundant work. Compaction migrate scanned 20815362 19573286 Compaction free scanned 16352612 11510663 [mgorman@techsingularity.net: remove redundant check] Link: http://lkml.kernel.org/r/20190201143853.GH9565@techsingularity.net Link: http://lkml.kernel.org/r/20190118175136.31341-23-mgorman@techsingularity.net Signed-off-by: Mel Gorman <mgorman@techsingularity.net> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Dan Carpenter <dan.carpenter@oracle.com> Cc: David Rientjes <rientjes@google.com> Cc: YueHaibing <yuehaibing@huawei.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> diff 5e1f0f09 Tue Mar 05 16:45:41 MST 2019 Mel Gorman <mgorman@techsingularity.net> mm, compaction: capture a page under direct compaction Compaction is inherently race-prone as a suitable page freed during compaction can be allocated by any parallel task. This patch uses a capture_control structure to isolate a page immediately when it is freed by a direct compactor in the slow path of the page allocator. The intent is to avoid redundant scanning. 5.0.0-rc1 5.0.0-rc1 selective-v3r17 capture-v3r19 Amean fault-both-1 0.00 ( 0.00%) 0.00 * 0.00%* Amean fault-both-3 2582.11 ( 0.00%) 2563.68 ( 0.71%) Amean fault-both-5 4500.26 ( 0.00%) 4233.52 ( 5.93%) Amean fault-both-7 5819.53 ( 0.00%) 6333.65 ( -8.83%) Amean fault-both-12 9321.18 ( 0.00%) 9759.38 ( -4.70%) Amean fault-both-18 9782.76 ( 0.00%) 10338.76 ( -5.68%) Amean fault-both-24 15272.81 ( 0.00%) 13379.55 * 12.40%* Amean fault-both-30 15121.34 ( 0.00%) 16158.25 ( -6.86%) Amean fault-both-32 18466.67 ( 0.00%) 18971.21 ( -2.73%) Latency is only moderately affected but the devil is in the details. A closer examination indicates that base page fault latency is reduced but latency of huge pages is increased as it takes creater care to succeed. Part of the "problem" is that allocation success rates are close to 100% even when under pressure and compaction gets harder 5.0.0-rc1 5.0.0-rc1 selective-v3r17 capture-v3r19 Percentage huge-3 96.70 ( 0.00%) 98.23 ( 1.58%) Percentage huge-5 96.99 ( 0.00%) 95.30 ( -1.75%) Percentage huge-7 94.19 ( 0.00%) 97.24 ( 3.24%) Percentage huge-12 94.95 ( 0.00%) 97.35 ( 2.53%) Percentage huge-18 96.74 ( 0.00%) 97.30 ( 0.58%) Percentage huge-24 97.07 ( 0.00%) 97.55 ( 0.50%) Percentage huge-30 95.69 ( 0.00%) 98.50 ( 2.95%) Percentage huge-32 96.70 ( 0.00%) 99.27 ( 2.65%) And scan rates are reduced as expected by 6% for the migration scanner and 29% for the free scanner indicating that there is less redundant work. Compaction migrate scanned 20815362 19573286 Compaction free scanned 16352612 11510663 [mgorman@techsingularity.net: remove redundant check] Link: http://lkml.kernel.org/r/20190201143853.GH9565@techsingularity.net Link: http://lkml.kernel.org/r/20190118175136.31341-23-mgorman@techsingularity.net Signed-off-by: Mel Gorman <mgorman@techsingularity.net> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Dan Carpenter <dan.carpenter@oracle.com> Cc: David Rientjes <rientjes@google.com> Cc: YueHaibing <yuehaibing@huawei.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> diff b2441318 Wed Nov 01 08:07:57 MDT 2017 Greg Kroah-Hartman <gregkh@linuxfoundation.org> License cleanup: add SPDX GPL-2.0 license identifier to files with no license Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> diff b2441318 Wed Nov 01 08:07:57 MDT 2017 Greg Kroah-Hartman <gregkh@linuxfoundation.org> License cleanup: add SPDX GPL-2.0 license identifier to files with no license Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> diff b2441318 Wed Nov 01 08:07:57 MDT 2017 Greg Kroah-Hartman <gregkh@linuxfoundation.org> License cleanup: add SPDX GPL-2.0 license identifier to files with no license Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
/linux-master/mm/ | ||
H A D | compaction.c | diff 73318e2c Tue Feb 20 11:32:20 MST 2024 Zi Yan <ziy@nvidia.com> mm/compaction: optimize >0 order folio compaction with free page split. During migration in a memory compaction, free pages are placed in an array of page lists based on their order. But the desired free page order (i.e., the order of a source page) might not be always present, thus leading to migration failures and premature compaction termination. Split a high order free pages when source migration page has a lower order to increase migration successful rate. Note: merging free pages when a migration fails and a lower order free page is returned via compaction_free() is possible, but there is too much work. Since the free pages are not buddy pages, it is hard to identify these free pages using existing PFN-based page merging algorithm. Link: https://lkml.kernel.org/r/20240220183220.1451315-5-zi.yan@sent.com Signed-off-by: Zi Yan <ziy@nvidia.com> Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com> Reviewed-by: Vlastimil Babka <vbabka@suse.cz> Tested-by: Baolin Wang <baolin.wang@linux.alibaba.com> Tested-by: Yu Zhao <yuzhao@google.com> Cc: Adam Manzanares <a.manzanares@samsung.com> Cc: David Hildenbrand <david@redhat.com> Cc: Huang Ying <ying.huang@intel.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Kemeng Shi <shikemeng@huaweicloud.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Luis Chamberlain <mcgrof@kernel.org> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Ryan Roberts <ryan.roberts@arm.com> Cc: Vishal Moola (Oracle) <vishal.moola@gmail.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Yin Fengwei <fengwei.yin@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> diff ab755bf4 Mon Feb 19 23:16:31 MST 2024 Baolin Wang <baolin.wang@linux.alibaba.com> mm: compaction: update the cc->nr_migratepages when allocating or freeing the freepages Currently we will use 'cc->nr_freepages >= cc->nr_migratepages' comparison to ensure that enough freepages are isolated in isolate_freepages(), however it just decreases the cc->nr_freepages without updating cc->nr_migratepages in compaction_alloc(), which will waste more CPU cycles and cause too many freepages to be isolated. So we should also update the cc->nr_migratepages when allocating or freeing the freepages to avoid isolating excess freepages. And I can see fewer free pages are scanned and isolated when running thpcompact on my Arm64 server: k6.7 k6.7_patched Ops Compaction pages isolated 120692036.00 118160797.00 Ops Compaction migrate scanned 131210329.00 154093268.00 Ops Compaction free scanned 1090587971.00 1080632536.00 Ops Compact scan efficiency 12.03 14.26 Moreover, I did not see an obvious latency improvements, this is likely because isolating freepages is not the bottleneck in the thpcompact test case. k6.7 k6.7_patched Amean fault-both-1 1089.76 ( 0.00%) 1080.16 * 0.88%* Amean fault-both-3 1616.48 ( 0.00%) 1636.65 * -1.25%* Amean fault-both-5 2266.66 ( 0.00%) 2219.20 * 2.09%* Amean fault-both-7 2909.84 ( 0.00%) 2801.90 * 3.71%* Amean fault-both-12 4861.26 ( 0.00%) 4733.25 * 2.63%* Amean fault-both-18 7351.11 ( 0.00%) 6950.51 * 5.45%* Amean fault-both-24 9059.30 ( 0.00%) 9159.99 * -1.11%* Amean fault-both-30 10685.68 ( 0.00%) 11399.02 * -6.68%* Link: https://lkml.kernel.org/r/6440493f18da82298152b6305d6b41c2962a3ce6.1708409245.git.baolin.wang@linux.alibaba.com Signed-off-by: Baolin Wang <baolin.wang@linux.alibaba.com> Acked-by: Mel Gorman <mgorman@techsingularity.net> Reviewed-by: Vlastimil Babka <vbabka@suse.cz> Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Zi Yan <ziy@nvidia.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> diff 803de900 Tue Feb 20 16:43:58 MST 2024 Vlastimil Babka <vbabka@suse.cz> mm, vmscan: prevent infinite loop for costly GFP_NOIO | __GFP_RETRY_MAYFAIL allocations Sven reports an infinite loop in __alloc_pages_slowpath() for costly order __GFP_RETRY_MAYFAIL allocations that are also GFP_NOIO. Such combination can happen in a suspend/resume context where a GFP_KERNEL allocation can have __GFP_IO masked out via gfp_allowed_mask. Quoting Sven: 1. try to do a "costly" allocation (order > PAGE_ALLOC_COSTLY_ORDER) with __GFP_RETRY_MAYFAIL set. 2. page alloc's __alloc_pages_slowpath tries to get a page from the freelist. This fails because there is nothing free of that costly order. 3. page alloc tries to reclaim by calling __alloc_pages_direct_reclaim, which bails out because a zone is ready to be compacted; it pretends to have made a single page of progress. 4. page alloc tries to compact, but this always bails out early because __GFP_IO is not set (it's not passed by the snd allocator, and even if it were, we are suspending so the __GFP_IO flag would be cleared anyway). 5. page alloc believes reclaim progress was made (because of the pretense in item 3) and so it checks whether it should retry compaction. The compaction retry logic thinks it should try again, because: a) reclaim is needed because of the early bail-out in item 4 b) a zonelist is suitable for compaction 6. goto 2. indefinite stall. (end quote) The immediate root cause is confusing the COMPACT_SKIPPED returned from __alloc_pages_direct_compact() (step 4) due to lack of __GFP_IO to be indicating a lack of order-0 pages, and in step 5 evaluating that in should_compact_retry() as a reason to retry, before incrementing and limiting the number of retries. There are however other places that wrongly assume that compaction can happen while we lack __GFP_IO. To fix this, introduce gfp_compaction_allowed() to abstract the __GFP_IO evaluation and switch the open-coded test in try_to_compact_pages() to use it. Also use the new helper in: - compaction_ready(), which will make reclaim not bail out in step 3, so there's at least one attempt to actually reclaim, even if chances are small for a costly order - in_reclaim_compaction() which will make should_continue_reclaim() return false and we don't over-reclaim unnecessarily - in __alloc_pages_slowpath() to set a local variable can_compact, which is then used to avoid retrying reclaim/compaction for costly allocations (step 5) if we can't compact and also to skip the early compaction attempt that we do in some cases Link: https://lkml.kernel.org/r/20240221114357.13655-2-vbabka@suse.cz Fixes: 3250845d0526 ("Revert "mm, oom: prevent premature OOM killer invocation for high order request"") Signed-off-by: Vlastimil Babka <vbabka@suse.cz> Reported-by: Sven van Ashbrook <svenva@chromium.org> Closes: https://lore.kernel.org/all/CAG-rBihs_xMKb3wrMO1%2B-%2Bp4fowP9oy1pa_OTkfxBzPUVOZF%2Bg@mail.gmail.com/ Tested-by: Karthikeyan Ramasubramanian <kramasub@chromium.org> Cc: Brian Geffon <bgeffon@google.com> Cc: Curtis Malainey <cujomalainey@chromium.org> Cc: Jaroslav Kysela <perex@perex.cz> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Michal Hocko <mhocko@kernel.org> Cc: Takashi Iwai <tiwai@suse.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> diff 803de900 Tue Feb 20 16:43:58 MST 2024 Vlastimil Babka <vbabka@suse.cz> mm, vmscan: prevent infinite loop for costly GFP_NOIO | __GFP_RETRY_MAYFAIL allocations Sven reports an infinite loop in __alloc_pages_slowpath() for costly order __GFP_RETRY_MAYFAIL allocations that are also GFP_NOIO. Such combination can happen in a suspend/resume context where a GFP_KERNEL allocation can have __GFP_IO masked out via gfp_allowed_mask. Quoting Sven: 1. try to do a "costly" allocation (order > PAGE_ALLOC_COSTLY_ORDER) with __GFP_RETRY_MAYFAIL set. 2. page alloc's __alloc_pages_slowpath tries to get a page from the freelist. This fails because there is nothing free of that costly order. 3. page alloc tries to reclaim by calling __alloc_pages_direct_reclaim, which bails out because a zone is ready to be compacted; it pretends to have made a single page of progress. 4. page alloc tries to compact, but this always bails out early because __GFP_IO is not set (it's not passed by the snd allocator, and even if it were, we are suspending so the __GFP_IO flag would be cleared anyway). 5. page alloc believes reclaim progress was made (because of the pretense in item 3) and so it checks whether it should retry compaction. The compaction retry logic thinks it should try again, because: a) reclaim is needed because of the early bail-out in item 4 b) a zonelist is suitable for compaction 6. goto 2. indefinite stall. (end quote) The immediate root cause is confusing the COMPACT_SKIPPED returned from __alloc_pages_direct_compact() (step 4) due to lack of __GFP_IO to be indicating a lack of order-0 pages, and in step 5 evaluating that in should_compact_retry() as a reason to retry, before incrementing and limiting the number of retries. There are however other places that wrongly assume that compaction can happen while we lack __GFP_IO. To fix this, introduce gfp_compaction_allowed() to abstract the __GFP_IO evaluation and switch the open-coded test in try_to_compact_pages() to use it. Also use the new helper in: - compaction_ready(), which will make reclaim not bail out in step 3, so there's at least one attempt to actually reclaim, even if chances are small for a costly order - in_reclaim_compaction() which will make should_continue_reclaim() return false and we don't over-reclaim unnecessarily - in __alloc_pages_slowpath() to set a local variable can_compact, which is then used to avoid retrying reclaim/compaction for costly allocations (step 5) if we can't compact and also to skip the early compaction attempt that we do in some cases Link: https://lkml.kernel.org/r/20240221114357.13655-2-vbabka@suse.cz Fixes: 3250845d0526 ("Revert "mm, oom: prevent premature OOM killer invocation for high order request"") Signed-off-by: Vlastimil Babka <vbabka@suse.cz> Reported-by: Sven van Ashbrook <svenva@chromium.org> Closes: https://lore.kernel.org/all/CAG-rBihs_xMKb3wrMO1%2B-%2Bp4fowP9oy1pa_OTkfxBzPUVOZF%2Bg@mail.gmail.com/ Tested-by: Karthikeyan Ramasubramanian <kramasub@chromium.org> Cc: Brian Geffon <bgeffon@google.com> Cc: Curtis Malainey <cujomalainey@chromium.org> Cc: Jaroslav Kysela <perex@perex.cz> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Michal Hocko <mhocko@kernel.org> Cc: Takashi Iwai <tiwai@suse.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> diff 803de900 Tue Feb 20 16:43:58 MST 2024 Vlastimil Babka <vbabka@suse.cz> mm, vmscan: prevent infinite loop for costly GFP_NOIO | __GFP_RETRY_MAYFAIL allocations Sven reports an infinite loop in __alloc_pages_slowpath() for costly order __GFP_RETRY_MAYFAIL allocations that are also GFP_NOIO. Such combination can happen in a suspend/resume context where a GFP_KERNEL allocation can have __GFP_IO masked out via gfp_allowed_mask. Quoting Sven: 1. try to do a "costly" allocation (order > PAGE_ALLOC_COSTLY_ORDER) with __GFP_RETRY_MAYFAIL set. 2. page alloc's __alloc_pages_slowpath tries to get a page from the freelist. This fails because there is nothing free of that costly order. 3. page alloc tries to reclaim by calling __alloc_pages_direct_reclaim, which bails out because a zone is ready to be compacted; it pretends to have made a single page of progress. 4. page alloc tries to compact, but this always bails out early because __GFP_IO is not set (it's not passed by the snd allocator, and even if it were, we are suspending so the __GFP_IO flag would be cleared anyway). 5. page alloc believes reclaim progress was made (because of the pretense in item 3) and so it checks whether it should retry compaction. The compaction retry logic thinks it should try again, because: a) reclaim is needed because of the early bail-out in item 4 b) a zonelist is suitable for compaction 6. goto 2. indefinite stall. (end quote) The immediate root cause is confusing the COMPACT_SKIPPED returned from __alloc_pages_direct_compact() (step 4) due to lack of __GFP_IO to be indicating a lack of order-0 pages, and in step 5 evaluating that in should_compact_retry() as a reason to retry, before incrementing and limiting the number of retries. There are however other places that wrongly assume that compaction can happen while we lack __GFP_IO. To fix this, introduce gfp_compaction_allowed() to abstract the __GFP_IO evaluation and switch the open-coded test in try_to_compact_pages() to use it. Also use the new helper in: - compaction_ready(), which will make reclaim not bail out in step 3, so there's at least one attempt to actually reclaim, even if chances are small for a costly order - in_reclaim_compaction() which will make should_continue_reclaim() return false and we don't over-reclaim unnecessarily - in __alloc_pages_slowpath() to set a local variable can_compact, which is then used to avoid retrying reclaim/compaction for costly allocations (step 5) if we can't compact and also to skip the early compaction attempt that we do in some cases Link: https://lkml.kernel.org/r/20240221114357.13655-2-vbabka@suse.cz Fixes: 3250845d0526 ("Revert "mm, oom: prevent premature OOM killer invocation for high order request"") Signed-off-by: Vlastimil Babka <vbabka@suse.cz> Reported-by: Sven van Ashbrook <svenva@chromium.org> Closes: https://lore.kernel.org/all/CAG-rBihs_xMKb3wrMO1%2B-%2Bp4fowP9oy1pa_OTkfxBzPUVOZF%2Bg@mail.gmail.com/ Tested-by: Karthikeyan Ramasubramanian <kramasub@chromium.org> Cc: Brian Geffon <bgeffon@google.com> Cc: Curtis Malainey <cujomalainey@chromium.org> Cc: Jaroslav Kysela <perex@perex.cz> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Michal Hocko <mhocko@kernel.org> Cc: Takashi Iwai <tiwai@suse.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> diff 5e0a760b Thu Dec 28 07:47:04 MST 2023 Kirill A. Shutemov <kirill.shutemov@linux.intel.com> mm, treewide: rename MAX_ORDER to MAX_PAGE_ORDER commit 23baf831a32c ("mm, treewide: redefine MAX_ORDER sanely") has changed the definition of MAX_ORDER to be inclusive. This has caused issues with code that was not yet upstream and depended on the previous definition. To draw attention to the altered meaning of the define, rename MAX_ORDER to MAX_PAGE_ORDER. Link: https://lkml.kernel.org/r/20231228144704.14033-2-kirill.shutemov@linux.intel.com Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> diff 8df4e28c Fri Sep 01 09:51:39 MDT 2023 Kemeng Shi <shikemeng@huaweicloud.com> mm/compaction: remove repeat compact_blockskip_flush check in reset_isolation_suitable We have compact_blockskip_flush check in __reset_isolation_suitable, just remove repeat check before __reset_isolation_suitable in compact_blockskip_flush. Link: https://lkml.kernel.org/r/20230901155141.249860-5-shikemeng@huaweicloud.com Signed-off-by: Kemeng Shi <shikemeng@huaweicloud.com> Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com> Acked-by: Mel Gorman <mgorman@techsingularity.net> Cc: David Hildenbrand <david@redhat.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> diff 0aa8ea3c Fri Aug 04 05:04:50 MDT 2023 Kemeng Shi <shikemeng@huaweicloud.com> mm/compaction: correct comment of fast_find_migrateblock in isolate_migratepages After 90ed667c03fe5 ("Revert "Revert "mm/compaction: fix set skip in fast_find_migrateblock"""), we remove skip set in fast_find_migrateblock. Correct comment that fast_find_block is used to avoid isolation_suitable check for pageblock returned from fast_find_migrateblock because fast_find_migrateblock will mark found pageblock skipped. Instead, comment that fast_find_block is used to avoid a redundant check of fast found pageblock which is already checked skip flag inside fast_find_migrateblock. Link: https://lkml.kernel.org/r/20230804110454.2935878-5-shikemeng@huaweicloud.com Signed-off-by: Kemeng Shi <shikemeng@huaweicloud.com> Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com> Cc: David Hildenbrand <david@redhat.com> Cc: Mel Gorman <mgorman@techsingularity.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> diff 7545e2f2 Fri Aug 04 05:04:49 MDT 2023 Kemeng Shi <shikemeng@huaweicloud.com> mm/compaction: skip page block marked skip in isolate_migratepages_block Move migrate_pfn to page block end when block is marked skip to avoid unnecessary scan retry of that block from upper caller. For example, compact_zone may wrongly rescan skip page block with finish_pageblock set as following: 1. cc->migrate point to the start of page block 2. compact_zone record last_migrated_pfn to cc->migrate 3. compact_zone->isolate_migratepages->isolate_migratepages_block tries to scan the block. The low_pfn maybe moved forward to middle of block because of free pages at beginning of block. 4. we find first lru page could be isolated but block was exclusive marked skip. 5. abort isolate_migratepages_block and make cc->migrate_pfn point to found lru page at middle of block. 6. compact_zone find cc->migrate_pfn and last_migrated_pfn are in the same block and wrongly rescan the block with finish_pageblock set. Link: https://lkml.kernel.org/r/20230804110454.2935878-4-shikemeng@huaweicloud.com Signed-off-by: Kemeng Shi <shikemeng@huaweicloud.com> Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com> Cc: David Hildenbrand <david@redhat.com> Cc: Mel Gorman <mgorman@techsingularity.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> diff 13cfd63f Thu Aug 03 03:49:01 MDT 2023 Kemeng Shi <shikemeng@huaweicloud.com> mm/compaction: remove unnecessary "else continue" at end of loop in isolate_freepages_block There is no behavior change to remove "else continue" code at end of scan loop. Just remove it to make code cleaner. Link: https://lkml.kernel.org/r/20230803094901.2915942-5-shikemeng@huaweicloud.com Signed-off-by: Kemeng Shi <shikemeng@huaweicloud.com> Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com> Cc: David Hildenbrand <david@redhat.com> Cc: Kemeng Shi <shikemeng@huawei.com> Cc: Mel Gorman <mgorman@techsingularity.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
/linux-master/kernel/ | ||
H A D | sysctl.c | diff cf8e8658 Thu Oct 20 07:54:33 MDT 2022 Ard Biesheuvel <ardb@kernel.org> arch: Remove Itanium (IA-64) architecture The Itanium architecture is obsolete, and an informal survey [0] reveals that any residual use of Itanium hardware in production is mostly HP-UX or OpenVMS based. The use of Linux on Itanium appears to be limited to enthusiasts that occasionally boot a fresh Linux kernel to see whether things are still working as intended, and perhaps to churn out some distro packages that are rarely used in practice. None of the original companies behind Itanium still produce or support any hardware or software for the architecture, and it is listed as 'Orphaned' in the MAINTAINERS file, as apparently, none of the engineers that contributed on behalf of those companies (nor anyone else, for that matter) have been willing to support or maintain the architecture upstream or even be responsible for applying the odd fix. The Intel firmware team removed all IA-64 support from the Tianocore/EDK2 reference implementation of EFI in 2018. (Itanium is the original architecture for which EFI was developed, and the way Linux supports it deviates significantly from other architectures.) Some distros, such as Debian and Gentoo, still maintain [unofficial] ia64 ports, but many have dropped support years ago. While the argument is being made [1] that there is a 'for the common good' angle to being able to build and run existing projects such as the Grid Community Toolkit [2] on Itanium for interoperability testing, the fact remains that none of those projects are known to be deployed on Linux/ia64, and very few people actually have access to such a system in the first place. Even if there were ways imaginable in which Linux/ia64 could be put to good use today, what matters is whether anyone is actually doing that, and this does not appear to be the case. There are no emulators widely available, and so boot testing Itanium is generally infeasible for ordinary contributors. GCC still supports IA-64 but its compile farm [3] no longer has any IA-64 machines. GLIBC would like to get rid of IA-64 [4] too because it would permit some overdue code cleanups. In summary, the benefits to the ecosystem of having IA-64 be part of it are mostly theoretical, whereas the maintenance overhead of keeping it supported is real. So let's rip off the band aid, and remove the IA-64 arch code entirely. This follows the timeline proposed by the Debian/ia64 maintainer [5], which removes support in a controlled manner, leaving IA-64 in a known good state in the most recent LTS release. Other projects will follow once the kernel support is removed. [0] https://lore.kernel.org/all/CAMj1kXFCMh_578jniKpUtx_j8ByHnt=s7S+yQ+vGbKt9ud7+kQ@mail.gmail.com/ [1] https://lore.kernel.org/all/0075883c-7c51-00f5-2c2d-5119c1820410@web.de/ [2] https://gridcf.org/gct-docs/latest/index.html [3] https://cfarm.tetaneutral.net/machines/list/ [4] https://lore.kernel.org/all/87bkiilpc4.fsf@mid.deneb.enyo.de/ [5] https://lore.kernel.org/all/ff58a3e76e5102c94bb5946d99187b358def688a.camel@physik.fu-berlin.de/ Acked-by: Tony Luck <tony.luck@intel.com> Signed-off-by: Ard Biesheuvel <ardb@kernel.org> diff cf8e8658 Thu Oct 20 07:54:33 MDT 2022 Ard Biesheuvel <ardb@kernel.org> arch: Remove Itanium (IA-64) architecture The Itanium architecture is obsolete, and an informal survey [0] reveals that any residual use of Itanium hardware in production is mostly HP-UX or OpenVMS based. The use of Linux on Itanium appears to be limited to enthusiasts that occasionally boot a fresh Linux kernel to see whether things are still working as intended, and perhaps to churn out some distro packages that are rarely used in practice. None of the original companies behind Itanium still produce or support any hardware or software for the architecture, and it is listed as 'Orphaned' in the MAINTAINERS file, as apparently, none of the engineers that contributed on behalf of those companies (nor anyone else, for that matter) have been willing to support or maintain the architecture upstream or even be responsible for applying the odd fix. The Intel firmware team removed all IA-64 support from the Tianocore/EDK2 reference implementation of EFI in 2018. (Itanium is the original architecture for which EFI was developed, and the way Linux supports it deviates significantly from other architectures.) Some distros, such as Debian and Gentoo, still maintain [unofficial] ia64 ports, but many have dropped support years ago. While the argument is being made [1] that there is a 'for the common good' angle to being able to build and run existing projects such as the Grid Community Toolkit [2] on Itanium for interoperability testing, the fact remains that none of those projects are known to be deployed on Linux/ia64, and very few people actually have access to such a system in the first place. Even if there were ways imaginable in which Linux/ia64 could be put to good use today, what matters is whether anyone is actually doing that, and this does not appear to be the case. There are no emulators widely available, and so boot testing Itanium is generally infeasible for ordinary contributors. GCC still supports IA-64 but its compile farm [3] no longer has any IA-64 machines. GLIBC would like to get rid of IA-64 [4] too because it would permit some overdue code cleanups. In summary, the benefits to the ecosystem of having IA-64 be part of it are mostly theoretical, whereas the maintenance overhead of keeping it supported is real. So let's rip off the band aid, and remove the IA-64 arch code entirely. This follows the timeline proposed by the Debian/ia64 maintainer [5], which removes support in a controlled manner, leaving IA-64 in a known good state in the most recent LTS release. Other projects will follow once the kernel support is removed. [0] https://lore.kernel.org/all/CAMj1kXFCMh_578jniKpUtx_j8ByHnt=s7S+yQ+vGbKt9ud7+kQ@mail.gmail.com/ [1] https://lore.kernel.org/all/0075883c-7c51-00f5-2c2d-5119c1820410@web.de/ [2] https://gridcf.org/gct-docs/latest/index.html [3] https://cfarm.tetaneutral.net/machines/list/ [4] https://lore.kernel.org/all/87bkiilpc4.fsf@mid.deneb.enyo.de/ [5] https://lore.kernel.org/all/ff58a3e76e5102c94bb5946d99187b358def688a.camel@physik.fu-berlin.de/ Acked-by: Tony Luck <tony.luck@intel.com> Signed-off-by: Ard Biesheuvel <ardb@kernel.org> diff 2f5edd03 Tue May 23 06:22:19 MDT 2023 Joel Granados <j.granados@samsung.com> sysctl: Refactor base paths registrations This is part of the general push to deprecate register_sysctl_paths and register_sysctl_table. The old way of doing this through register_sysctl_base and DECLARE_SYSCTL_BASE macro is replaced with a call to register_sysctl_init. The 5 base paths affected are: "kernel", "vm", "debug", "dev" and "fs". We remove the register_sysctl_base function and the DECLARE_SYSCTL_BASE macro since they are no longer needed. In order to quickly acertain that the paths did not actually change I executed `find /proc/sys/ | sha1sum` and made sure that the sha was the same before and after the commit. We end up saving 563 bytes with this change: ./scripts/bloat-o-meter vmlinux.0.base vmlinux.1.refactor-base-paths add/remove: 0/5 grow/shrink: 2/0 up/down: 77/-640 (-563) Function old new delta sysctl_init_bases 55 111 +56 init_fs_sysctls 12 33 +21 vm_base_table 128 - -128 kernel_base_table 128 - -128 fs_base_table 128 - -128 dev_base_table 128 - -128 debug_base_table 128 - -128 Total: Before=21258215, After=21257652, chg -0.00% [mcgrof: modified to use register_sysctl_init() over register_sysctl() and add bloat-o-meter stats] Signed-off-by: Joel Granados <j.granados@samsung.com> Signed-off-by: Luis Chamberlain <mcgrof@kernel.org> Tested-by: Stephen Rothwell <sfr@canb.auug.org.au> Acked-by: Christian Brauner <brauner@kernel.org> diff 2f5edd03 Tue May 23 06:22:19 MDT 2023 Joel Granados <j.granados@samsung.com> sysctl: Refactor base paths registrations This is part of the general push to deprecate register_sysctl_paths and register_sysctl_table. The old way of doing this through register_sysctl_base and DECLARE_SYSCTL_BASE macro is replaced with a call to register_sysctl_init. The 5 base paths affected are: "kernel", "vm", "debug", "dev" and "fs". We remove the register_sysctl_base function and the DECLARE_SYSCTL_BASE macro since they are no longer needed. In order to quickly acertain that the paths did not actually change I executed `find /proc/sys/ | sha1sum` and made sure that the sha was the same before and after the commit. We end up saving 563 bytes with this change: ./scripts/bloat-o-meter vmlinux.0.base vmlinux.1.refactor-base-paths add/remove: 0/5 grow/shrink: 2/0 up/down: 77/-640 (-563) Function old new delta sysctl_init_bases 55 111 +56 init_fs_sysctls 12 33 +21 vm_base_table 128 - -128 kernel_base_table 128 - -128 fs_base_table 128 - -128 dev_base_table 128 - -128 debug_base_table 128 - -128 Total: Before=21258215, After=21257652, chg -0.00% [mcgrof: modified to use register_sysctl_init() over register_sysctl() and add bloat-o-meter stats] Signed-off-by: Joel Granados <j.granados@samsung.com> Signed-off-by: Luis Chamberlain <mcgrof@kernel.org> Tested-by: Stephen Rothwell <sfr@canb.auug.org.au> Acked-by: Christian Brauner <brauner@kernel.org> diff f1aa2eb5 Fri Feb 10 07:58:23 MST 2023 Ondrej Mosnacek <omosnace@redhat.com> sysctl: fix proc_dobool() usability Currently proc_dobool expects a (bool *) in table->data, but sizeof(int) in table->maxsize, because it uses do_proc_dointvec() directly. This is unsafe for at least two reasons: 1. A sysctl table definition may use { .data = &variable, .maxsize = sizeof(variable) }, not realizing that this makes the sysctl unusable (see the Fixes: tag) and that they need to use the completely counterintuitive sizeof(int) instead. 2. proc_dobool() will currently try to parse an array of values if given .maxsize >= 2*sizeof(int), but will try to write values of type bool by offsets of sizeof(int), so it will not work correctly with neither an (int *) nor a (bool *). There is no .maxsize validation to prevent this. Fix this by: 1. Constraining proc_dobool() to allow only one value and .maxsize == sizeof(bool). 2. Wrapping the original struct ctl_table in a temporary one with .data pointing to a local int variable and .maxsize set to sizeof(int) and passing this one to proc_dointvec(), converting the value to/from bool as needed (using proc_dou8vec_minmax() as an example). 3. Extending sysctl_check_table() to enforce proc_dobool() expectations. 4. Fixing the proc_dobool() docstring (it was just copy-pasted from proc_douintvec, apparently...). 5. Converting all existing proc_dobool() users to set .maxsize to sizeof(bool) instead of sizeof(int). Fixes: 83efeeeb3d04 ("tty: Allow TIOCSTI to be disabled") Fixes: a2071573d634 ("sysctl: introduce new proc handler proc_dobool") Signed-off-by: Ondrej Mosnacek <omosnace@redhat.com> Acked-by: Kees Cook <keescook@chromium.org> Signed-off-by: Luis Chamberlain <mcgrof@kernel.org> diff 5bfd5d3e Sat May 21 23:29:33 MDT 2022 Fanjun Kong <bh1scw@gmail.com> kernel/sysctl.c: Clean up indentation, replace spaces with tab. This patch fixes two coding style issues: 1. Clean up indentation, replace spaces with tab 2. Add space after ',' Signed-off-by: Fanjun Kong <bh1scw@gmail.com> Signed-off-by: Luis Chamberlain <mcgrof@kernel.org> diff 54771613 Fri Jan 21 23:13:03 MST 2022 Luis Chamberlain <mcgrof@kernel.org> sysctl: move maxolduid as a sysctl specific const The maxolduid value is only shared for sysctl purposes for use on a max range. Just stuff this into our shared const array. [akpm@linux-foundation.org: fix sysctl_vals[], per Mickaël] Link: https://lkml.kernel.org/r/20211129205548.605569-5-mcgrof@kernel.org Signed-off-by: Luis Chamberlain <mcgrof@kernel.org> Signed-off-by: Mickaël Salaün <mic@digikod.net> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: Antti Palosaari <crope@iki.fi> Cc: Eric Biederman <ebiederm@xmission.com> Cc: Iurii Zaikin <yzaikin@google.com> Cc: "J. Bruce Fields" <bfields@fieldses.org> Cc: Jeff Layton <jlayton@kernel.org> Cc: Kees Cook <keescook@chromium.org> Cc: Lukas Middendorf <kernel@tuxforce.de> Cc: Stephen Kitt <steve@sk2.org> Cc: Xiaoming Ni <nixiaoming@huawei.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> diff 3ba442d5 Fri Jan 21 23:12:28 MST 2022 Luis Chamberlain <mcgrof@kernel.org> fs: move binfmt_misc sysctl to its own file kernel/sysctl.c is a kitchen sink where everyone leaves their dirty dishes, this makes it very difficult to maintain. To help with this maintenance let's start by moving sysctls to places where they actually belong. The proc sysctl maintainers do not want to know what sysctl knobs you wish to add for your own piece of code, we just care about the core logic. This moves the binfmt_misc sysctl to its own file to help remove clutter from kernel/sysctl.c. Link: https://lkml.kernel.org/r/20211124231435.1445213-5-mcgrof@kernel.org Signed-off-by: Luis Chamberlain <mcgrof@kernel.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Amir Goldstein <amir73il@gmail.com> Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: Antti Palosaari <crope@iki.fi> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Benjamin LaHaise <bcrl@kvack.org> Cc: Clemens Ladisch <clemens@ladisch.de> Cc: David Airlie <airlied@linux.ie> Cc: Douglas Gilbert <dgilbert@interlog.com> Cc: Eric Biederman <ebiederm@xmission.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Iurii Zaikin <yzaikin@google.com> Cc: James E.J. Bottomley <jejb@linux.ibm.com> Cc: Jani Nikula <jani.nikula@intel.com> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Jan Kara <jack@suse.cz> Cc: Joel Becker <jlbec@evilplan.org> Cc: John Ogness <john.ogness@linutronix.de> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Joseph Qi <joseph.qi@linux.alibaba.com> Cc: Julia Lawall <julia.lawall@inria.fr> Cc: Kees Cook <keescook@chromium.org> Cc: Lukas Middendorf <kernel@tuxforce.de> Cc: Mark Fasheh <mark@fasheh.com> Cc: Martin K. Petersen <martin.petersen@oracle.com> Cc: Paul Turner <pjt@google.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Petr Mladek <pmladek@suse.com> Cc: Phillip Potter <phil@philpotter.co.uk> Cc: Qing Wang <wangqing@vivo.com> Cc: "Rafael J. Wysocki" <rafael@kernel.org> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Sebastian Reichel <sre@kernel.org> Cc: Sergey Senozhatsky <senozhatsky@chromium.org> Cc: Stephen Kitt <steve@sk2.org> Cc: Steven Rostedt (VMware) <rostedt@goodmis.org> Cc: Suren Baghdasaryan <surenb@google.com> Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Cc: "Theodore Ts'o" <tytso@mit.edu> Cc: Xiaoming Ni <nixiaoming@huawei.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> diff dd0693fd Fri Jan 21 23:11:05 MST 2022 Xiaoming Ni <nixiaoming@huawei.com> watchdog: move watchdog sysctl interface to watchdog.c The kernel/sysctl.c is a kitchen sink where everyone leaves their dirty dishes, this makes it very difficult to maintain. To help with this maintenance let's start by moving sysctls to places where they actually belong. The proc sysctl maintainers do not want to know what sysctl knobs you wish to add for your own piece of code, we just care about the core logic of proc sysctl. So, move the watchdog syscl interface to watchdog.c. Use register_sysctl() to register the sysctl interface to avoid merge conflicts when different features modify sysctl.c at the same time. [mcgrof@kernel.org: justify the move on the commit log] Link: https://lkml.kernel.org/r/20211123202347.818157-5-mcgrof@kernel.org Signed-off-by: Xiaoming Ni <nixiaoming@huawei.com> Signed-off-by: Luis Chamberlain <mcgrof@kernel.org> Reviewed-by: Kees Cook <keescook@chromium.org> Reviewed-by: Petr Mladek <pmladek@suse.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Amir Goldstein <amir73il@gmail.com> Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: Benjamin LaHaise <bcrl@kvack.org> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Iurii Zaikin <yzaikin@google.com> Cc: Jan Kara <jack@suse.cz> Cc: Paul Turner <pjt@google.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Qing Wang <wangqing@vivo.com> Cc: Sebastian Reichel <sre@kernel.org> Cc: Sergey Senozhatsky <senozhatsky@chromium.org> Cc: Stephen Kitt <steve@sk2.org> Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Cc: Antti Palosaari <crope@iki.fi> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Clemens Ladisch <clemens@ladisch.de> Cc: David Airlie <airlied@linux.ie> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Joseph Qi <joseph.qi@linux.alibaba.com> Cc: Julia Lawall <julia.lawall@inria.fr> Cc: Lukas Middendorf <kernel@tuxforce.de> Cc: Mark Fasheh <mark@fasheh.com> Cc: Phillip Potter <phil@philpotter.co.uk> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Douglas Gilbert <dgilbert@interlog.com> Cc: James E.J. Bottomley <jejb@linux.ibm.com> Cc: Jani Nikula <jani.nikula@intel.com> Cc: John Ogness <john.ogness@linutronix.de> Cc: Martin K. Petersen <martin.petersen@oracle.com> Cc: "Rafael J. Wysocki" <rafael@kernel.org> Cc: Steven Rostedt (VMware) <rostedt@goodmis.org> Cc: Suren Baghdasaryan <surenb@google.com> Cc: "Theodore Ts'o" <tytso@mit.edu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> diff b6459415 Tue Dec 28 17:49:13 MST 2021 Jakub Kicinski <kuba@kernel.org> net: Don't include filter.h from net/sock.h sock.h is pretty heavily used (5k objects rebuilt on x86 after it's touched). We can drop the include of filter.h from it and add a forward declaration of struct sk_filter instead. This decreases the number of rebuilt objects when bpf.h is touched from ~5k to ~1k. There's a lot of missing includes this was masking. Primarily in networking tho, this time. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Marc Kleine-Budde <mkl@pengutronix.de> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Acked-by: Nikolay Aleksandrov <nikolay@nvidia.com> Acked-by: Stefano Garzarella <sgarzare@redhat.com> Link: https://lore.kernel.org/bpf/20211229004913.513372-1-kuba@kernel.org diff b6459415 Tue Dec 28 17:49:13 MST 2021 Jakub Kicinski <kuba@kernel.org> net: Don't include filter.h from net/sock.h sock.h is pretty heavily used (5k objects rebuilt on x86 after it's touched). We can drop the include of filter.h from it and add a forward declaration of struct sk_filter instead. This decreases the number of rebuilt objects when bpf.h is touched from ~5k to ~1k. There's a lot of missing includes this was masking. Primarily in networking tho, this time. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Marc Kleine-Budde <mkl@pengutronix.de> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Acked-by: Nikolay Aleksandrov <nikolay@nvidia.com> Acked-by: Stefano Garzarella <sgarzare@redhat.com> Link: https://lore.kernel.org/bpf/20211229004913.513372-1-kuba@kernel.org |
Completed in 506 milliseconds