Searched +hist:3 +hist:a9ad0b4 (Results 1 - 5 of 5) sorted by relevance
/linux-master/include/linux/ | ||
H A D | types.h | diff 3db55767 Fri May 12 04:33:38 MDT 2023 Alexey Dobriyan <adobriyan@gmail.com> add intptr_t Add signed intptr_t given that a) it is standard type and b) uintptr_t is in tree. Link: https://lkml.kernel.org/r/ed66b9e4-1fb7-45be-9bb9-d4bc291c691f@p183 Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> diff 412c53a6 Thu Feb 20 21:03:54 MST 2020 Arnd Bergmann <arnd@arndb.de> y2038: remove unused time32 interfaces No users remain, so kill these off before we grow new ones. Link: http://lkml.kernel.org/r/20200110154232.4104492-3-arnd@arndb.de Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Thomas Gleixner <tglx@linutronix.de> Cc: Deepa Dinamani <deepa.kernel@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> diff b22f22a3 Thu Jun 07 18:10:30 MDT 2018 Masahiro Yamada <yamada.masahiro@socionext.com> include/linux/types.h: use fixed width types without double-underscore prefix This header file is not exported. It is safe to reference types without double-underscore prefix. Link: http://lkml.kernel.org/r/1526350925-14922-3-git-send-email-yamada.masahiro@socionext.com Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Alexey Dobriyan <adobriyan@gmail.com> Cc: Lihao Liang <lianglihao@huawei.com> Cc: Philippe Ombredanne <pombredanne@nexb.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> diff b2441318 Wed Nov 01 08:07:57 MDT 2017 Greg Kroah-Hartman <gregkh@linuxfoundation.org> License cleanup: add SPDX GPL-2.0 license identifier to files with no license Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> diff b2441318 Wed Nov 01 08:07:57 MDT 2017 Greg Kroah-Hartman <gregkh@linuxfoundation.org> License cleanup: add SPDX GPL-2.0 license identifier to files with no license Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> diff b2441318 Wed Nov 01 08:07:57 MDT 2017 Greg Kroah-Hartman <gregkh@linuxfoundation.org> License cleanup: add SPDX GPL-2.0 license identifier to files with no license Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> diff b2441318 Wed Nov 01 08:07:57 MDT 2017 Greg Kroah-Hartman <gregkh@linuxfoundation.org> License cleanup: add SPDX GPL-2.0 license identifier to files with no license Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> diff b2441318 Wed Nov 01 08:07:57 MDT 2017 Greg Kroah-Hartman <gregkh@linuxfoundation.org> License cleanup: add SPDX GPL-2.0 license identifier to files with no license Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> diff b2441318 Wed Nov 01 08:07:57 MDT 2017 Greg Kroah-Hartman <gregkh@linuxfoundation.org> License cleanup: add SPDX GPL-2.0 license identifier to files with no license Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> diff 3a9ad0b4 Wed May 27 18:23:51 MDT 2015 Yinghai Lu <yinghai@kernel.org> PCI: Add pci_bus_addr_t David Ahern reported that d63e2e1f3df9 ("sparc/PCI: Clip bridge windows to fit in upstream windows") fails to boot on sparc/T5-8: pci 0000:06:00.0: reg 0x184: can't handle BAR above 4GB (bus address 0x110204000) The problem is that sparc64 assumed that dma_addr_t only needed to hold DMA addresses, i.e., bus addresses returned via the DMA API (dma_map_single(), etc.), while the PCI core assumed dma_addr_t could hold *any* bus address, including raw BAR values. On sparc64, all DMA addresses fit in 32 bits, so dma_addr_t is a 32-bit type. However, BAR values can be 64 bits wide, so they don't fit in a dma_addr_t. d63e2e1f3df9 added new checking that tripped over this mismatch. Add pci_bus_addr_t, which is wide enough to hold any PCI bus address, including both raw BAR values and DMA addresses. This will be 64 bits on 64-bit platforms and on platforms with a 64-bit dma_addr_t. Then dma_addr_t only needs to be wide enough to hold addresses from the DMA API. [bhelgaas: changelog, bugzilla, Kconfig to ensure pci_bus_addr_t is at least as wide as dma_addr_t, documentation] Fixes: d63e2e1f3df9 ("sparc/PCI: Clip bridge windows to fit in upstream windows") Fixes: 23b13bc76f35 ("PCI: Fail safely if we can't handle BARs larger than 4GB") Link: http://lkml.kernel.org/r/CAE9FiQU1gJY1LYrxs+ma5LCTEEe4xmtjRG0aXJ9K_Tsu+m9Wuw@mail.gmail.com Link: http://lkml.kernel.org/r/1427857069-6789-1-git-send-email-yinghai@kernel.org Link: https://bugzilla.kernel.org/show_bug.cgi?id=96231 Reported-by: David Ahern <david.ahern@oracle.com> Tested-by: David Ahern <david.ahern@oracle.com> Signed-off-by: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: David S. Miller <davem@davemloft.net> CC: stable@vger.kernel.org # v3.19+ diff 3a9ad0b4 Wed May 27 18:23:51 MDT 2015 Yinghai Lu <yinghai@kernel.org> PCI: Add pci_bus_addr_t David Ahern reported that d63e2e1f3df9 ("sparc/PCI: Clip bridge windows to fit in upstream windows") fails to boot on sparc/T5-8: pci 0000:06:00.0: reg 0x184: can't handle BAR above 4GB (bus address 0x110204000) The problem is that sparc64 assumed that dma_addr_t only needed to hold DMA addresses, i.e., bus addresses returned via the DMA API (dma_map_single(), etc.), while the PCI core assumed dma_addr_t could hold *any* bus address, including raw BAR values. On sparc64, all DMA addresses fit in 32 bits, so dma_addr_t is a 32-bit type. However, BAR values can be 64 bits wide, so they don't fit in a dma_addr_t. d63e2e1f3df9 added new checking that tripped over this mismatch. Add pci_bus_addr_t, which is wide enough to hold any PCI bus address, including both raw BAR values and DMA addresses. This will be 64 bits on 64-bit platforms and on platforms with a 64-bit dma_addr_t. Then dma_addr_t only needs to be wide enough to hold addresses from the DMA API. [bhelgaas: changelog, bugzilla, Kconfig to ensure pci_bus_addr_t is at least as wide as dma_addr_t, documentation] Fixes: d63e2e1f3df9 ("sparc/PCI: Clip bridge windows to fit in upstream windows") Fixes: 23b13bc76f35 ("PCI: Fail safely if we can't handle BARs larger than 4GB") Link: http://lkml.kernel.org/r/CAE9FiQU1gJY1LYrxs+ma5LCTEEe4xmtjRG0aXJ9K_Tsu+m9Wuw@mail.gmail.com Link: http://lkml.kernel.org/r/1427857069-6789-1-git-send-email-yinghai@kernel.org Link: https://bugzilla.kernel.org/show_bug.cgi?id=96231 Reported-by: David Ahern <david.ahern@oracle.com> Tested-by: David Ahern <david.ahern@oracle.com> Signed-off-by: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: David S. Miller <davem@davemloft.net> CC: stable@vger.kernel.org # v3.19+ |
H A D | pci.h | diff 17423360 Fri Feb 23 13:58:50 MST 2024 David E. Box <david.e.box@linux.intel.com> PCI/ASPM: Save L1 PM Substates Capability for suspend/resume 4ff116d0d5fd ("PCI/ASPM: Save L1 PM Substates Capability for suspend/resume") restored the L1 PM Substates Capability after resume, which reduced power consumption by making the ASPM L1.x states work after resume. a7152be79b62 ("Revert "PCI/ASPM: Save L1 PM Substates Capability for suspend/resume"") reverted 4ff116d0d5fd because resume failed on some systems, so power consumption after resume increased again. a7152be79b62 mentioned that we restore L1 PM substate configuration even though ASPM L1 may already be enabled. This is due the fact that the pci_restore_aspm_l1ss_state() was called before pci_restore_pcie_state(). Save and restore the L1 PM Substates Capability, following PCIe r6.1, sec 5.5.4 more closely by: 1) Do not restore ASPM configuration in pci_restore_pcie_state() but do that after PCIe capability is restored in pci_restore_aspm_state() following PCIe r6.1, sec 5.5.4. 2) If BIOS reenables L1SS, particularly L1.2, we need to clear the enables in the right order, downstream before upstream. Defer restoring the L1SS config until we are at the downstream component. Then update the config for both ends of the link in the prescribed order. 3) Program ASPM L1 PM substate configuration before L1 enables. 4) Program ASPM L1 PM substate enables last, after rest of the fields in the capability are programmed. [bhelgaas: commit log, squash L1SS-related patches, do both LNKCTL restores in pci_restore_pcie_state()] Link: https://lore.kernel.org/r/20240128233212.1139663-3-david.e.box@linux.intel.com Link: https://lore.kernel.org/r/20240128233212.1139663-4-david.e.box@linux.intel.com Link: https://lore.kernel.org/r/20240223205851.114931-5-helgaas@kernel.org Closes: https://bugzilla.kernel.org/show_bug.cgi?id=217321 Link: https://bugzilla.kernel.org/show_bug.cgi?id=216782 Link: https://bugzilla.kernel.org/show_bug.cgi?id=216877 Co-developed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Co-developed-by: David E. Box <david.e.box@linux.intel.com> Reported-by: Koba Ko <koba.ko@canonical.com> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: David E. Box <david.e.box@linux.intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Tested-by: Tasev Nikola <tasev.stefanoska@skynet.be> # Asus UX305FA Cc: Mark Enriquez <enriquezmark36@gmail.com> Cc: Thomas Witt <kernel@witt.link> Cc: Werner Sembach <wse@tuxedocomputers.com> Cc: Vidya Sagar <vidyas@nvidia.com> diff 17423360 Fri Feb 23 13:58:50 MST 2024 David E. Box <david.e.box@linux.intel.com> PCI/ASPM: Save L1 PM Substates Capability for suspend/resume 4ff116d0d5fd ("PCI/ASPM: Save L1 PM Substates Capability for suspend/resume") restored the L1 PM Substates Capability after resume, which reduced power consumption by making the ASPM L1.x states work after resume. a7152be79b62 ("Revert "PCI/ASPM: Save L1 PM Substates Capability for suspend/resume"") reverted 4ff116d0d5fd because resume failed on some systems, so power consumption after resume increased again. a7152be79b62 mentioned that we restore L1 PM substate configuration even though ASPM L1 may already be enabled. This is due the fact that the pci_restore_aspm_l1ss_state() was called before pci_restore_pcie_state(). Save and restore the L1 PM Substates Capability, following PCIe r6.1, sec 5.5.4 more closely by: 1) Do not restore ASPM configuration in pci_restore_pcie_state() but do that after PCIe capability is restored in pci_restore_aspm_state() following PCIe r6.1, sec 5.5.4. 2) If BIOS reenables L1SS, particularly L1.2, we need to clear the enables in the right order, downstream before upstream. Defer restoring the L1SS config until we are at the downstream component. Then update the config for both ends of the link in the prescribed order. 3) Program ASPM L1 PM substate configuration before L1 enables. 4) Program ASPM L1 PM substate enables last, after rest of the fields in the capability are programmed. [bhelgaas: commit log, squash L1SS-related patches, do both LNKCTL restores in pci_restore_pcie_state()] Link: https://lore.kernel.org/r/20240128233212.1139663-3-david.e.box@linux.intel.com Link: https://lore.kernel.org/r/20240128233212.1139663-4-david.e.box@linux.intel.com Link: https://lore.kernel.org/r/20240223205851.114931-5-helgaas@kernel.org Closes: https://bugzilla.kernel.org/show_bug.cgi?id=217321 Link: https://bugzilla.kernel.org/show_bug.cgi?id=216782 Link: https://bugzilla.kernel.org/show_bug.cgi?id=216877 Co-developed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Co-developed-by: David E. Box <david.e.box@linux.intel.com> Reported-by: Koba Ko <koba.ko@canonical.com> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: David E. Box <david.e.box@linux.intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Tested-by: Tasev Nikola <tasev.stefanoska@skynet.be> # Asus UX305FA Cc: Mark Enriquez <enriquezmark36@gmail.com> Cc: Thomas Witt <kernel@witt.link> Cc: Werner Sembach <wse@tuxedocomputers.com> Cc: Vidya Sagar <vidyas@nvidia.com> diff 1e560864 Tue Jan 30 03:02:43 MST 2024 Johan Hovold <johan+linaro@kernel.org> PCI/ASPM: Fix deadlock when enabling ASPM A last minute revert in 6.7-final introduced a potential deadlock when enabling ASPM during probe of Qualcomm PCIe controllers as reported by lockdep: ============================================ WARNING: possible recursive locking detected 6.7.0 #40 Not tainted -------------------------------------------- kworker/u16:5/90 is trying to acquire lock: ffffacfa78ced000 (pci_bus_sem){++++}-{3:3}, at: pcie_aspm_pm_state_change+0x58/0xdc but task is already holding lock: ffffacfa78ced000 (pci_bus_sem){++++}-{3:3}, at: pci_walk_bus+0x34/0xbc other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(pci_bus_sem); lock(pci_bus_sem); *** DEADLOCK *** Call trace: print_deadlock_bug+0x25c/0x348 __lock_acquire+0x10a4/0x2064 lock_acquire+0x1e8/0x318 down_read+0x60/0x184 pcie_aspm_pm_state_change+0x58/0xdc pci_set_full_power_state+0xa8/0x114 pci_set_power_state+0xc4/0x120 qcom_pcie_enable_aspm+0x1c/0x3c [pcie_qcom] pci_walk_bus+0x64/0xbc qcom_pcie_host_post_init_2_7_0+0x28/0x34 [pcie_qcom] The deadlock can easily be reproduced on machines like the Lenovo ThinkPad X13s by adding a delay to increase the race window during asynchronous probe where another thread can take a write lock. Add a new pci_set_power_state_locked() and associated helper functions that can be called with the PCI bus semaphore held to avoid taking the read lock twice. Link: https://lore.kernel.org/r/ZZu0qx2cmn7IwTyQ@hovoldconsulting.com Link: https://lore.kernel.org/r/20240130100243.11011-1-johan+linaro@kernel.org Fixes: f93e71aea6c6 ("Revert "PCI/ASPM: Remove pcie_aspm_pm_state_change()"") Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Cc: <stable@vger.kernel.org> # 6.7 diff 1e560864 Tue Jan 30 03:02:43 MST 2024 Johan Hovold <johan+linaro@kernel.org> PCI/ASPM: Fix deadlock when enabling ASPM A last minute revert in 6.7-final introduced a potential deadlock when enabling ASPM during probe of Qualcomm PCIe controllers as reported by lockdep: ============================================ WARNING: possible recursive locking detected 6.7.0 #40 Not tainted -------------------------------------------- kworker/u16:5/90 is trying to acquire lock: ffffacfa78ced000 (pci_bus_sem){++++}-{3:3}, at: pcie_aspm_pm_state_change+0x58/0xdc but task is already holding lock: ffffacfa78ced000 (pci_bus_sem){++++}-{3:3}, at: pci_walk_bus+0x34/0xbc other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(pci_bus_sem); lock(pci_bus_sem); *** DEADLOCK *** Call trace: print_deadlock_bug+0x25c/0x348 __lock_acquire+0x10a4/0x2064 lock_acquire+0x1e8/0x318 down_read+0x60/0x184 pcie_aspm_pm_state_change+0x58/0xdc pci_set_full_power_state+0xa8/0x114 pci_set_power_state+0xc4/0x120 qcom_pcie_enable_aspm+0x1c/0x3c [pcie_qcom] pci_walk_bus+0x64/0xbc qcom_pcie_host_post_init_2_7_0+0x28/0x34 [pcie_qcom] The deadlock can easily be reproduced on machines like the Lenovo ThinkPad X13s by adding a delay to increase the race window during asynchronous probe where another thread can take a write lock. Add a new pci_set_power_state_locked() and associated helper functions that can be called with the PCI bus semaphore held to avoid taking the read lock twice. Link: https://lore.kernel.org/r/ZZu0qx2cmn7IwTyQ@hovoldconsulting.com Link: https://lore.kernel.org/r/20240130100243.11011-1-johan+linaro@kernel.org Fixes: f93e71aea6c6 ("Revert "PCI/ASPM: Remove pcie_aspm_pm_state_change()"") Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Cc: <stable@vger.kernel.org> # 6.7 diff 1e560864 Tue Jan 30 03:02:43 MST 2024 Johan Hovold <johan+linaro@kernel.org> PCI/ASPM: Fix deadlock when enabling ASPM A last minute revert in 6.7-final introduced a potential deadlock when enabling ASPM during probe of Qualcomm PCIe controllers as reported by lockdep: ============================================ WARNING: possible recursive locking detected 6.7.0 #40 Not tainted -------------------------------------------- kworker/u16:5/90 is trying to acquire lock: ffffacfa78ced000 (pci_bus_sem){++++}-{3:3}, at: pcie_aspm_pm_state_change+0x58/0xdc but task is already holding lock: ffffacfa78ced000 (pci_bus_sem){++++}-{3:3}, at: pci_walk_bus+0x34/0xbc other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(pci_bus_sem); lock(pci_bus_sem); *** DEADLOCK *** Call trace: print_deadlock_bug+0x25c/0x348 __lock_acquire+0x10a4/0x2064 lock_acquire+0x1e8/0x318 down_read+0x60/0x184 pcie_aspm_pm_state_change+0x58/0xdc pci_set_full_power_state+0xa8/0x114 pci_set_power_state+0xc4/0x120 qcom_pcie_enable_aspm+0x1c/0x3c [pcie_qcom] pci_walk_bus+0x64/0xbc qcom_pcie_host_post_init_2_7_0+0x28/0x34 [pcie_qcom] The deadlock can easily be reproduced on machines like the Lenovo ThinkPad X13s by adding a delay to increase the race window during asynchronous probe where another thread can take a write lock. Add a new pci_set_power_state_locked() and associated helper functions that can be called with the PCI bus semaphore held to avoid taking the read lock twice. Link: https://lore.kernel.org/r/ZZu0qx2cmn7IwTyQ@hovoldconsulting.com Link: https://lore.kernel.org/r/20240130100243.11011-1-johan+linaro@kernel.org Fixes: f93e71aea6c6 ("Revert "PCI/ASPM: Remove pcie_aspm_pm_state_change()"") Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Cc: <stable@vger.kernel.org> # 6.7 diff 1e560864 Tue Jan 30 03:02:43 MST 2024 Johan Hovold <johan+linaro@kernel.org> PCI/ASPM: Fix deadlock when enabling ASPM A last minute revert in 6.7-final introduced a potential deadlock when enabling ASPM during probe of Qualcomm PCIe controllers as reported by lockdep: ============================================ WARNING: possible recursive locking detected 6.7.0 #40 Not tainted -------------------------------------------- kworker/u16:5/90 is trying to acquire lock: ffffacfa78ced000 (pci_bus_sem){++++}-{3:3}, at: pcie_aspm_pm_state_change+0x58/0xdc but task is already holding lock: ffffacfa78ced000 (pci_bus_sem){++++}-{3:3}, at: pci_walk_bus+0x34/0xbc other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(pci_bus_sem); lock(pci_bus_sem); *** DEADLOCK *** Call trace: print_deadlock_bug+0x25c/0x348 __lock_acquire+0x10a4/0x2064 lock_acquire+0x1e8/0x318 down_read+0x60/0x184 pcie_aspm_pm_state_change+0x58/0xdc pci_set_full_power_state+0xa8/0x114 pci_set_power_state+0xc4/0x120 qcom_pcie_enable_aspm+0x1c/0x3c [pcie_qcom] pci_walk_bus+0x64/0xbc qcom_pcie_host_post_init_2_7_0+0x28/0x34 [pcie_qcom] The deadlock can easily be reproduced on machines like the Lenovo ThinkPad X13s by adding a delay to increase the race window during asynchronous probe where another thread can take a write lock. Add a new pci_set_power_state_locked() and associated helper functions that can be called with the PCI bus semaphore held to avoid taking the read lock twice. Link: https://lore.kernel.org/r/ZZu0qx2cmn7IwTyQ@hovoldconsulting.com Link: https://lore.kernel.org/r/20240130100243.11011-1-johan+linaro@kernel.org Fixes: f93e71aea6c6 ("Revert "PCI/ASPM: Remove pcie_aspm_pm_state_change()"") Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Cc: <stable@vger.kernel.org> # 6.7 diff 5e70d0ac Mon Jul 17 06:04:53 MDT 2023 Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> PCI: Add locking to RMW PCI Express Capability Register accessors Many places in the kernel write the Link Control and Root Control PCI Express Capability Registers without proper concurrency control and this could result in losing the changes one of the writers intended to make. Add pcie_cap_lock spinlock into the struct pci_dev and use it to protect bit changes made in the RMW capability accessors. Protect only a selected set of registers by differentiating the RMW accessor internally to locked/unlocked variants using a wrapper which has the same signature as pcie_capability_clear_and_set_word(). As the Capability Register (pos) given to the wrapper is always a constant, the compiler should be able to simplify all the dead-code away. So far only the Link Control Register (ASPM, hotplug, link retraining, various drivers) and the Root Control Register (AER & PME) seem to require RMW locking. Suggested-by: Lukas Wunner <lukas@wunner.de> Fixes: c7f486567c1d ("PCI PM: PCIe PME root port service driver") Fixes: f12eb72a268b ("PCI/ASPM: Use PCI Express Capability accessors") Fixes: 7d715a6c1ae5 ("PCI: add PCI Express ASPM support") Fixes: affa48de8417 ("staging/rdma/hfi1: Add support for enabling/disabling PCIe ASPM") Fixes: 849a9366cba9 ("misc: rtsx: Add support new chip rts5228 mmc: rtsx: Add support MMC_CAP2_NO_MMC") Fixes: 3d1e7aa80d1c ("misc: rtsx: Use pcie_capability_clear_and_set_word() for PCI_EXP_LNKCTL") Fixes: c0e5f4e73a71 ("misc: rtsx: Add support for RTS5261") Fixes: 3df4fce739e2 ("misc: rtsx: separate aspm mode into MODE_REG and MODE_CFG") Fixes: 121e9c6b5c4c ("misc: rtsx: modify and fix init_hw function") Fixes: 19f3bd548f27 ("mfd: rtsx: Remove LCTLR defination") Fixes: 773ccdfd9cc6 ("mfd: rtsx: Read vendor setting from config space") Fixes: 8275b77a1513 ("mfd: rts5249: Add support for RTS5250S power saving") Fixes: 5da4e04ae480 ("misc: rtsx: Add support for RTS5260") Fixes: 0f49bfbd0f2e ("tg3: Use PCI Express Capability accessors") Fixes: 5e7dfd0fb94a ("tg3: Prevent corruption at 10 / 100Mbps w CLKREQ") Fixes: b726e493e8dc ("r8169: sync existing 8168 device hardware start sequences with vendor driver") Fixes: e6de30d63eb1 ("r8169: more 8168dp support.") Fixes: 8a06127602de ("Bluetooth: hci_bcm4377: Add new driver for BCM4377 PCIe boards") Fixes: 6f461f6c7c96 ("e1000e: enable/disable ASPM L0s and L1 and ERT according to hardware errata") Fixes: 1eae4eb2a1c7 ("e1000e: Disable L1 ASPM power savings for 82573 mobile variants") Fixes: 8060e169e02f ("ath9k: Enable extended synch for AR9485 to fix L0s recovery issue") Fixes: 69ce674bfa69 ("ath9k: do btcoex ASPM disabling at initialization time") Fixes: f37f05503575 ("mt76: mt76x2e: disable pcie_aspm by default") Link: https://lore.kernel.org/r/20230717120503.15276-2-ilpo.jarvinen@linux.intel.com Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: "Rafael J. Wysocki" <rafael@kernel.org> diff 5e70d0ac Mon Jul 17 06:04:53 MDT 2023 Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> PCI: Add locking to RMW PCI Express Capability Register accessors Many places in the kernel write the Link Control and Root Control PCI Express Capability Registers without proper concurrency control and this could result in losing the changes one of the writers intended to make. Add pcie_cap_lock spinlock into the struct pci_dev and use it to protect bit changes made in the RMW capability accessors. Protect only a selected set of registers by differentiating the RMW accessor internally to locked/unlocked variants using a wrapper which has the same signature as pcie_capability_clear_and_set_word(). As the Capability Register (pos) given to the wrapper is always a constant, the compiler should be able to simplify all the dead-code away. So far only the Link Control Register (ASPM, hotplug, link retraining, various drivers) and the Root Control Register (AER & PME) seem to require RMW locking. Suggested-by: Lukas Wunner <lukas@wunner.de> Fixes: c7f486567c1d ("PCI PM: PCIe PME root port service driver") Fixes: f12eb72a268b ("PCI/ASPM: Use PCI Express Capability accessors") Fixes: 7d715a6c1ae5 ("PCI: add PCI Express ASPM support") Fixes: affa48de8417 ("staging/rdma/hfi1: Add support for enabling/disabling PCIe ASPM") Fixes: 849a9366cba9 ("misc: rtsx: Add support new chip rts5228 mmc: rtsx: Add support MMC_CAP2_NO_MMC") Fixes: 3d1e7aa80d1c ("misc: rtsx: Use pcie_capability_clear_and_set_word() for PCI_EXP_LNKCTL") Fixes: c0e5f4e73a71 ("misc: rtsx: Add support for RTS5261") Fixes: 3df4fce739e2 ("misc: rtsx: separate aspm mode into MODE_REG and MODE_CFG") Fixes: 121e9c6b5c4c ("misc: rtsx: modify and fix init_hw function") Fixes: 19f3bd548f27 ("mfd: rtsx: Remove LCTLR defination") Fixes: 773ccdfd9cc6 ("mfd: rtsx: Read vendor setting from config space") Fixes: 8275b77a1513 ("mfd: rts5249: Add support for RTS5250S power saving") Fixes: 5da4e04ae480 ("misc: rtsx: Add support for RTS5260") Fixes: 0f49bfbd0f2e ("tg3: Use PCI Express Capability accessors") Fixes: 5e7dfd0fb94a ("tg3: Prevent corruption at 10 / 100Mbps w CLKREQ") Fixes: b726e493e8dc ("r8169: sync existing 8168 device hardware start sequences with vendor driver") Fixes: e6de30d63eb1 ("r8169: more 8168dp support.") Fixes: 8a06127602de ("Bluetooth: hci_bcm4377: Add new driver for BCM4377 PCIe boards") Fixes: 6f461f6c7c96 ("e1000e: enable/disable ASPM L0s and L1 and ERT according to hardware errata") Fixes: 1eae4eb2a1c7 ("e1000e: Disable L1 ASPM power savings for 82573 mobile variants") Fixes: 8060e169e02f ("ath9k: Enable extended synch for AR9485 to fix L0s recovery issue") Fixes: 69ce674bfa69 ("ath9k: do btcoex ASPM disabling at initialization time") Fixes: f37f05503575 ("mt76: mt76x2e: disable pcie_aspm by default") Link: https://lore.kernel.org/r/20230717120503.15276-2-ilpo.jarvinen@linux.intel.com Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: "Rafael J. Wysocki" <rafael@kernel.org> diff 144d204d Thu Mar 30 10:24:29 MDT 2023 Andy Shevchenko <andriy.shevchenko@linux.intel.com> PCI: Introduce pci_resource_n() Introduce pci_resource_n() and replace open-coded implementations of it in pci.h. Link: https://lore.kernel.org/r/20230330162434.35055-3-andriy.shevchenko@linux.intel.com Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> diff 8b3517f8 Tue Jan 31 09:30:18 MST 2023 Huacai Chen <chenhuacai@kernel.org> PCI: loongson: Prevent LS7A MRRS increases Except for isochronous-configured devices, software may set Max_Read_Request_Size (MRRS) to any value up to 4096. If a device issues a read request with size greater than the completer's Max_Payload_Size (MPS), the completer is required to break the response into multiple completions. Instead of correctly responding with multiple completions to a large read request, some LS7A Root Ports respond with a Completer Abort. To prevent this, the MRRS must be limited to an implementation-specific value. The OS cannot detect that value, so rely on BIOS to configure MRRS before booting, and quirk the Root Ports so we never set an MRRS larger than that BIOS value for any downstream device. N.B. Hot-added devices are not configured by BIOS, and they power up with MRRS = 512 bytes, so these devices will be limited to 512 bytes. If the LS7A limit is smaller, those hot-added devices may not work correctly, but per [1], hotplug is not supported with this chipset revision. [1] https://lore.kernel.org/r/073638a7-ae68-2847-ac3d-29e5e760d6af@loongson.cn [bhelgaas: commit log] Link: https://bugzilla.kernel.org/show_bug.cgi?id=216884 Link: https://lore.kernel.org/r/20230201043018.778499-3-chenhuacai@loongson.cn Signed-off-by: Huacai Chen <chenhuacai@loongson.cn> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> |
/linux-master/drivers/pci/ | ||
H A D | Kconfig | diff ae874027 Wed Jan 31 02:00:21 MST 2024 Philipp Stanner <pstanner@redhat.com> PCI: Move pci_iomap.c to drivers/pci/ The entirety of pci_iomap.c is guarded by an #ifdef CONFIG_PCI. It, consequently, does not belong to lib/ because it is not generic infrastructure. Move pci_iomap.c to drivers/pci/ and implement the necessary changes to Makefiles and Kconfigs. Update MAINTAINERS file. Update Documentation. Link: https://lore.kernel.org/r/20240131090023.12331-3-pstanner@redhat.com [bhelgaas: squash in https://lore.kernel.org/r/20240212150934.24559-1-pstanner@redhat.com] Suggested-by: Danilo Krummrich <dakr@redhat.com> Signed-off-by: Philipp Stanner <pstanner@redhat.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Arnd Bergmann <arnd@arndb.de> diff 407d1a51 Tue Aug 15 11:19:57 MDT 2023 Lizhi Hou <lizhi.hou@amd.com> PCI: Create device tree node for bridge The PCI endpoint device such as Xilinx Alveo PCI card maps the register spaces from multiple hardware peripherals to its PCI BAR. Normally, the PCI core discovers devices and BARs using the PCI enumeration process. There is no infrastructure to discover the hardware peripherals that are present in a PCI device, and which can be accessed through the PCI BARs. Apparently, the device tree framework requires a device tree node for the PCI device. Thus, it can generate the device tree nodes for hardware peripherals underneath. Because PCI is self discoverable bus, there might not be a device tree node created for PCI devices. Furthermore, if the PCI device is hot pluggable, when it is plugged in, the device tree nodes for its parent bridges are required. Add support to generate device tree node for PCI bridges. Add an of_pci_make_dev_node() interface that can be used to create device tree node for PCI devices. Add a PCI_DYNAMIC_OF_NODES config option. When the option is turned on, the kernel will generate device tree nodes for PCI bridges unconditionally. Initially, add the basic properties for the dynamically generated device tree nodes which include #address-cells, #size-cells, device_type, compatible, ranges, reg. Acked-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Lizhi Hou <lizhi.hou@amd.com> Link: https://lore.kernel.org/r/1692120000-46900-3-git-send-email-lizhi.hou@amd.com Signed-off-by: Rob Herring <robh@kernel.org> diff d9932b46 Wed Jan 05 12:32:36 MST 2022 Sunil Muthuswamy <sunilmut@microsoft.com> PCI: hv: Add arm64 Hyper-V vPCI support Add arm64 Hyper-V vPCI support by implementing the arch specific interfaces. Introduce an IRQ domain and chip specific to Hyper-v vPCI that is based on SPIs. The IRQ domain parents itself to the arch GIC IRQ domain for basic vector management. [bhelgaas: squash in fix from Yang Li <yang.lee@linux.alibaba.com>: https://lore.kernel.org/r/20220112003324.62755-1-yang.lee@linux.alibaba.com] Link: https://lore.kernel.org/r/1641411156-31705-3-git-send-email-sunilmut@linux.microsoft.com Signed-off-by: Sunil Muthuswamy <sunilmut@microsoft.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Marc Zyngier <maz@kernel.org> Reviewed-by: Michael Kelley <mikelley@microsoft.com> diff e243ae95 Thu Sep 16 16:48:03 MDT 2021 Jan Beulich <jbeulich@suse.com> PCI: only build xen-pcifront in PV-enabled environments The driver's module init function, pcifront_init(), invokes xen_pv_domain() first thing. That construct produces constant "false" when !CONFIG_XEN_PV. Hence there's no point building the driver in non-PV configurations. Drop the (now implicit and generally wrong) X86 dependency: At present, XEN_PV can only be set when X86 is also enabled. In general an architecture supporting Xen PV (and PCI) would want to have this driver built. Signed-off-by: Jan Beulich <jbeulich@suse.com> Reviewed-by: Stefano Stabellini <sstabellini@kernel.org> Acked-by: Bjorn Helgaas <bhelgaas@google.com> Link: https://lore.kernel.org/r/3a7f6c9b-215d-b593-8056-b5fe605dafd7@suse.com Signed-off-by: Juergen Gross <jgross@suse.com> diff 3ee80364 Wed Jun 15 14:47:33 MDT 2016 Arnd Bergmann <arnd@arndb.de> PCI/MSI: irqchip: Fix PCI_MSI dependencies The PCI_MSI symbol is used inconsistently throughout the tree, with some drivers using 'select' and others using 'depends on', or using conditional selects. This keeps causing problems; the latest one is a result of ARCH_ALPINE using a 'select' statement to enable its platform-specific MSI driver without enabling MSI: warning: (ARCH_ALPINE) selects ALPINE_MSI which has unmet direct dependencies (PCI && PCI_MSI) drivers/irqchip/irq-alpine-msi.c:104:15: error: variable 'alpine_msix_domain_info' has initializer but incomplete type static struct msi_domain_info alpine_msix_domain_info = { ^~~~~~~~~~~~~~~ drivers/irqchip/irq-alpine-msi.c:105:2: error: unknown field 'flags' specified in initializer .flags = MSI_FLAG_USE_DEF_DOM_OPS | MSI_FLAG_USE_DEF_CHIP_OPS | ^ drivers/irqchip/irq-alpine-msi.c:105:11: error: 'MSI_FLAG_USE_DEF_DOM_OPS' undeclared here (not in a function) .flags = MSI_FLAG_USE_DEF_DOM_OPS | MSI_FLAG_USE_DEF_CHIP_OPS | ^~~~~~~~~~~~~~~~~~~~~~~~ There is little reason to enable PCI support for a platform that uses MSI but then leave MSI disabled at compile time. Select PCI_MSI from irqchips that implement MSI, and make PCI host bridges that use MSI on ARM depend on PCI_MSI_IRQ_DOMAIN. For all three architectures that support PCI_MSI_IRQ_DOMAIN (ARM, ARM64, X86), enable it by default whenever MSI is enabled. [bhelgaas: changelog, omit crypto config change] Suggested-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Marc Zyngier <marc.zyngier@arm.com> diff e02a653e Wed Sep 02 10:17:29 MDT 2015 Helge Deller <deller@gmx.de> PCI,parisc: Enable 64-bit bus addresses on PA-RISC Commit 3a9ad0b ("PCI: Add pci_bus_addr_t") unconditionally introduced usage of 64-bit PCI bus addresses on all 64-bit platforms which broke PA-RISC. It turned out that due to enabling the 64-bit addresses, the PCI logic decided to use the GMMIO instead of the LMMIO region. This commit simply disables registering the GMMIO and thus we fall back to use the LMMIO region as before. Reverts commit 45ea2a5fed6dacb9bb0558d8b21eacc1c45d5bb4 ("PCI: Don't use 64-bit bus addresses on PA-RISC") To: linux-parisc@vger.kernel.org Cc: linux-pci@vger.kernel.org Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Meelis Roos <mroos@linux.ee> Cc: stable@vger.kernel.org # v3.19+ Signed-off-by: Helge Deller <deller@gmx.de> diff 45ea2a5f Wed Aug 19 23:08:15 MDT 2015 Bjorn Helgaas <bhelgaas@google.com> PCI: Don't use 64-bit bus addresses on PA-RISC Meelis and Helge reported that 3a9ad0b4fdcd ("PCI: Add pci_bus_addr_t") caused HPMCs on A500 and hangs on rp5470. PA-RISC does not set ARCH_DMA_ADDR_T_64BIT, even for 64-bit kernels, so prior to 3a9ad0b4fdcd, we always used 32-bit PCI addresses. After 3a9ad0b4fdcd, we do use 64-bit PCI addresses in 64-bit kernels, and apparently there's some PA-RISC problem related to them. Fixes: 3a9ad0b4fdcd ("PCI: Add pci_bus_addr_t") Link: http://lkml.kernel.org/r/alpine.LRH.2.11.1507260929000.30065@math.ut.ee Reported-by: Meelis Roos <mroos@linux.ee> Reported-by: Helge Deller <deller@gmx.de> Tested-by: Helge Deller <deller@gmx.de> Based-on-idea-by: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Yinghai Lu <yinghai@kernel.org> CC: stable@vger.kernel.org # v3.19+ diff 45ea2a5f Wed Aug 19 23:08:15 MDT 2015 Bjorn Helgaas <bhelgaas@google.com> PCI: Don't use 64-bit bus addresses on PA-RISC Meelis and Helge reported that 3a9ad0b4fdcd ("PCI: Add pci_bus_addr_t") caused HPMCs on A500 and hangs on rp5470. PA-RISC does not set ARCH_DMA_ADDR_T_64BIT, even for 64-bit kernels, so prior to 3a9ad0b4fdcd, we always used 32-bit PCI addresses. After 3a9ad0b4fdcd, we do use 64-bit PCI addresses in 64-bit kernels, and apparently there's some PA-RISC problem related to them. Fixes: 3a9ad0b4fdcd ("PCI: Add pci_bus_addr_t") Link: http://lkml.kernel.org/r/alpine.LRH.2.11.1507260929000.30065@math.ut.ee Reported-by: Meelis Roos <mroos@linux.ee> Reported-by: Helge Deller <deller@gmx.de> Tested-by: Helge Deller <deller@gmx.de> Based-on-idea-by: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Yinghai Lu <yinghai@kernel.org> CC: stable@vger.kernel.org # v3.19+ diff 45ea2a5f Wed Aug 19 23:08:15 MDT 2015 Bjorn Helgaas <bhelgaas@google.com> PCI: Don't use 64-bit bus addresses on PA-RISC Meelis and Helge reported that 3a9ad0b4fdcd ("PCI: Add pci_bus_addr_t") caused HPMCs on A500 and hangs on rp5470. PA-RISC does not set ARCH_DMA_ADDR_T_64BIT, even for 64-bit kernels, so prior to 3a9ad0b4fdcd, we always used 32-bit PCI addresses. After 3a9ad0b4fdcd, we do use 64-bit PCI addresses in 64-bit kernels, and apparently there's some PA-RISC problem related to them. Fixes: 3a9ad0b4fdcd ("PCI: Add pci_bus_addr_t") Link: http://lkml.kernel.org/r/alpine.LRH.2.11.1507260929000.30065@math.ut.ee Reported-by: Meelis Roos <mroos@linux.ee> Reported-by: Helge Deller <deller@gmx.de> Tested-by: Helge Deller <deller@gmx.de> Based-on-idea-by: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Yinghai Lu <yinghai@kernel.org> CC: stable@vger.kernel.org # v3.19+ diff 45ea2a5f Wed Aug 19 23:08:15 MDT 2015 Bjorn Helgaas <bhelgaas@google.com> PCI: Don't use 64-bit bus addresses on PA-RISC Meelis and Helge reported that 3a9ad0b4fdcd ("PCI: Add pci_bus_addr_t") caused HPMCs on A500 and hangs on rp5470. PA-RISC does not set ARCH_DMA_ADDR_T_64BIT, even for 64-bit kernels, so prior to 3a9ad0b4fdcd, we always used 32-bit PCI addresses. After 3a9ad0b4fdcd, we do use 64-bit PCI addresses in 64-bit kernels, and apparently there's some PA-RISC problem related to them. Fixes: 3a9ad0b4fdcd ("PCI: Add pci_bus_addr_t") Link: http://lkml.kernel.org/r/alpine.LRH.2.11.1507260929000.30065@math.ut.ee Reported-by: Meelis Roos <mroos@linux.ee> Reported-by: Helge Deller <deller@gmx.de> Tested-by: Helge Deller <deller@gmx.de> Based-on-idea-by: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Yinghai Lu <yinghai@kernel.org> CC: stable@vger.kernel.org # v3.19+ |
H A D | bus.c | diff 1e560864 Tue Jan 30 03:02:43 MST 2024 Johan Hovold <johan+linaro@kernel.org> PCI/ASPM: Fix deadlock when enabling ASPM A last minute revert in 6.7-final introduced a potential deadlock when enabling ASPM during probe of Qualcomm PCIe controllers as reported by lockdep: ============================================ WARNING: possible recursive locking detected 6.7.0 #40 Not tainted -------------------------------------------- kworker/u16:5/90 is trying to acquire lock: ffffacfa78ced000 (pci_bus_sem){++++}-{3:3}, at: pcie_aspm_pm_state_change+0x58/0xdc but task is already holding lock: ffffacfa78ced000 (pci_bus_sem){++++}-{3:3}, at: pci_walk_bus+0x34/0xbc other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(pci_bus_sem); lock(pci_bus_sem); *** DEADLOCK *** Call trace: print_deadlock_bug+0x25c/0x348 __lock_acquire+0x10a4/0x2064 lock_acquire+0x1e8/0x318 down_read+0x60/0x184 pcie_aspm_pm_state_change+0x58/0xdc pci_set_full_power_state+0xa8/0x114 pci_set_power_state+0xc4/0x120 qcom_pcie_enable_aspm+0x1c/0x3c [pcie_qcom] pci_walk_bus+0x64/0xbc qcom_pcie_host_post_init_2_7_0+0x28/0x34 [pcie_qcom] The deadlock can easily be reproduced on machines like the Lenovo ThinkPad X13s by adding a delay to increase the race window during asynchronous probe where another thread can take a write lock. Add a new pci_set_power_state_locked() and associated helper functions that can be called with the PCI bus semaphore held to avoid taking the read lock twice. Link: https://lore.kernel.org/r/ZZu0qx2cmn7IwTyQ@hovoldconsulting.com Link: https://lore.kernel.org/r/20240130100243.11011-1-johan+linaro@kernel.org Fixes: f93e71aea6c6 ("Revert "PCI/ASPM: Remove pcie_aspm_pm_state_change()"") Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Cc: <stable@vger.kernel.org> # 6.7 diff 1e560864 Tue Jan 30 03:02:43 MST 2024 Johan Hovold <johan+linaro@kernel.org> PCI/ASPM: Fix deadlock when enabling ASPM A last minute revert in 6.7-final introduced a potential deadlock when enabling ASPM during probe of Qualcomm PCIe controllers as reported by lockdep: ============================================ WARNING: possible recursive locking detected 6.7.0 #40 Not tainted -------------------------------------------- kworker/u16:5/90 is trying to acquire lock: ffffacfa78ced000 (pci_bus_sem){++++}-{3:3}, at: pcie_aspm_pm_state_change+0x58/0xdc but task is already holding lock: ffffacfa78ced000 (pci_bus_sem){++++}-{3:3}, at: pci_walk_bus+0x34/0xbc other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(pci_bus_sem); lock(pci_bus_sem); *** DEADLOCK *** Call trace: print_deadlock_bug+0x25c/0x348 __lock_acquire+0x10a4/0x2064 lock_acquire+0x1e8/0x318 down_read+0x60/0x184 pcie_aspm_pm_state_change+0x58/0xdc pci_set_full_power_state+0xa8/0x114 pci_set_power_state+0xc4/0x120 qcom_pcie_enable_aspm+0x1c/0x3c [pcie_qcom] pci_walk_bus+0x64/0xbc qcom_pcie_host_post_init_2_7_0+0x28/0x34 [pcie_qcom] The deadlock can easily be reproduced on machines like the Lenovo ThinkPad X13s by adding a delay to increase the race window during asynchronous probe where another thread can take a write lock. Add a new pci_set_power_state_locked() and associated helper functions that can be called with the PCI bus semaphore held to avoid taking the read lock twice. Link: https://lore.kernel.org/r/ZZu0qx2cmn7IwTyQ@hovoldconsulting.com Link: https://lore.kernel.org/r/20240130100243.11011-1-johan+linaro@kernel.org Fixes: f93e71aea6c6 ("Revert "PCI/ASPM: Remove pcie_aspm_pm_state_change()"") Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Cc: <stable@vger.kernel.org> # 6.7 diff 1e560864 Tue Jan 30 03:02:43 MST 2024 Johan Hovold <johan+linaro@kernel.org> PCI/ASPM: Fix deadlock when enabling ASPM A last minute revert in 6.7-final introduced a potential deadlock when enabling ASPM during probe of Qualcomm PCIe controllers as reported by lockdep: ============================================ WARNING: possible recursive locking detected 6.7.0 #40 Not tainted -------------------------------------------- kworker/u16:5/90 is trying to acquire lock: ffffacfa78ced000 (pci_bus_sem){++++}-{3:3}, at: pcie_aspm_pm_state_change+0x58/0xdc but task is already holding lock: ffffacfa78ced000 (pci_bus_sem){++++}-{3:3}, at: pci_walk_bus+0x34/0xbc other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(pci_bus_sem); lock(pci_bus_sem); *** DEADLOCK *** Call trace: print_deadlock_bug+0x25c/0x348 __lock_acquire+0x10a4/0x2064 lock_acquire+0x1e8/0x318 down_read+0x60/0x184 pcie_aspm_pm_state_change+0x58/0xdc pci_set_full_power_state+0xa8/0x114 pci_set_power_state+0xc4/0x120 qcom_pcie_enable_aspm+0x1c/0x3c [pcie_qcom] pci_walk_bus+0x64/0xbc qcom_pcie_host_post_init_2_7_0+0x28/0x34 [pcie_qcom] The deadlock can easily be reproduced on machines like the Lenovo ThinkPad X13s by adding a delay to increase the race window during asynchronous probe where another thread can take a write lock. Add a new pci_set_power_state_locked() and associated helper functions that can be called with the PCI bus semaphore held to avoid taking the read lock twice. Link: https://lore.kernel.org/r/ZZu0qx2cmn7IwTyQ@hovoldconsulting.com Link: https://lore.kernel.org/r/20240130100243.11011-1-johan+linaro@kernel.org Fixes: f93e71aea6c6 ("Revert "PCI/ASPM: Remove pcie_aspm_pm_state_change()"") Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Cc: <stable@vger.kernel.org> # 6.7 diff 1e560864 Tue Jan 30 03:02:43 MST 2024 Johan Hovold <johan+linaro@kernel.org> PCI/ASPM: Fix deadlock when enabling ASPM A last minute revert in 6.7-final introduced a potential deadlock when enabling ASPM during probe of Qualcomm PCIe controllers as reported by lockdep: ============================================ WARNING: possible recursive locking detected 6.7.0 #40 Not tainted -------------------------------------------- kworker/u16:5/90 is trying to acquire lock: ffffacfa78ced000 (pci_bus_sem){++++}-{3:3}, at: pcie_aspm_pm_state_change+0x58/0xdc but task is already holding lock: ffffacfa78ced000 (pci_bus_sem){++++}-{3:3}, at: pci_walk_bus+0x34/0xbc other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(pci_bus_sem); lock(pci_bus_sem); *** DEADLOCK *** Call trace: print_deadlock_bug+0x25c/0x348 __lock_acquire+0x10a4/0x2064 lock_acquire+0x1e8/0x318 down_read+0x60/0x184 pcie_aspm_pm_state_change+0x58/0xdc pci_set_full_power_state+0xa8/0x114 pci_set_power_state+0xc4/0x120 qcom_pcie_enable_aspm+0x1c/0x3c [pcie_qcom] pci_walk_bus+0x64/0xbc qcom_pcie_host_post_init_2_7_0+0x28/0x34 [pcie_qcom] The deadlock can easily be reproduced on machines like the Lenovo ThinkPad X13s by adding a delay to increase the race window during asynchronous probe where another thread can take a write lock. Add a new pci_set_power_state_locked() and associated helper functions that can be called with the PCI bus semaphore held to avoid taking the read lock twice. Link: https://lore.kernel.org/r/ZZu0qx2cmn7IwTyQ@hovoldconsulting.com Link: https://lore.kernel.org/r/20240130100243.11011-1-johan+linaro@kernel.org Fixes: f93e71aea6c6 ("Revert "PCI/ASPM: Remove pcie_aspm_pm_state_change()"") Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Cc: <stable@vger.kernel.org> # 6.7 diff 407d1a51 Tue Aug 15 11:19:57 MDT 2023 Lizhi Hou <lizhi.hou@amd.com> PCI: Create device tree node for bridge The PCI endpoint device such as Xilinx Alveo PCI card maps the register spaces from multiple hardware peripherals to its PCI BAR. Normally, the PCI core discovers devices and BARs using the PCI enumeration process. There is no infrastructure to discover the hardware peripherals that are present in a PCI device, and which can be accessed through the PCI BARs. Apparently, the device tree framework requires a device tree node for the PCI device. Thus, it can generate the device tree nodes for hardware peripherals underneath. Because PCI is self discoverable bus, there might not be a device tree node created for PCI devices. Furthermore, if the PCI device is hot pluggable, when it is plugged in, the device tree nodes for its parent bridges are required. Add support to generate device tree node for PCI bridges. Add an of_pci_make_dev_node() interface that can be used to create device tree node for PCI devices. Add a PCI_DYNAMIC_OF_NODES config option. When the option is turned on, the kernel will generate device tree nodes for PCI bridges unconditionally. Initially, add the basic properties for the dynamically generated device tree nodes which include #address-cells, #size-cells, device_type, compatible, ranges, reg. Acked-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Lizhi Hou <lizhi.hou@amd.com> Link: https://lore.kernel.org/r/1692120000-46900-3-git-send-email-lizhi.hou@amd.com Signed-off-by: Rob Herring <robh@kernel.org> diff 5c5fb3c3 Thu Dec 08 12:03:39 MST 2022 Bjorn Helgaas <bhelgaas@google.com> PCI: Skip allocate_resource() if too little space available pci_bus_alloc_from_region() allocates MMIO space by iterating through all the resources available on the bus. The available resource might be reduced if the caller requires 32-bit space or we're avoiding BIOS or E820 areas. Don't bother calling allocate_resource() if we need more space than is available in this resource. This prevents some pointless and annoying messages about avoided areas. Link: https://lore.kernel.org/r/20221208190341.1560157-3-helgaas@kernel.org Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Hans de Goede <hdegoede@redhat.com> diff 3a9ad0b4 Wed May 27 18:23:51 MDT 2015 Yinghai Lu <yinghai@kernel.org> PCI: Add pci_bus_addr_t David Ahern reported that d63e2e1f3df9 ("sparc/PCI: Clip bridge windows to fit in upstream windows") fails to boot on sparc/T5-8: pci 0000:06:00.0: reg 0x184: can't handle BAR above 4GB (bus address 0x110204000) The problem is that sparc64 assumed that dma_addr_t only needed to hold DMA addresses, i.e., bus addresses returned via the DMA API (dma_map_single(), etc.), while the PCI core assumed dma_addr_t could hold *any* bus address, including raw BAR values. On sparc64, all DMA addresses fit in 32 bits, so dma_addr_t is a 32-bit type. However, BAR values can be 64 bits wide, so they don't fit in a dma_addr_t. d63e2e1f3df9 added new checking that tripped over this mismatch. Add pci_bus_addr_t, which is wide enough to hold any PCI bus address, including both raw BAR values and DMA addresses. This will be 64 bits on 64-bit platforms and on platforms with a 64-bit dma_addr_t. Then dma_addr_t only needs to be wide enough to hold addresses from the DMA API. [bhelgaas: changelog, bugzilla, Kconfig to ensure pci_bus_addr_t is at least as wide as dma_addr_t, documentation] Fixes: d63e2e1f3df9 ("sparc/PCI: Clip bridge windows to fit in upstream windows") Fixes: 23b13bc76f35 ("PCI: Fail safely if we can't handle BARs larger than 4GB") Link: http://lkml.kernel.org/r/CAE9FiQU1gJY1LYrxs+ma5LCTEEe4xmtjRG0aXJ9K_Tsu+m9Wuw@mail.gmail.com Link: http://lkml.kernel.org/r/1427857069-6789-1-git-send-email-yinghai@kernel.org Link: https://bugzilla.kernel.org/show_bug.cgi?id=96231 Reported-by: David Ahern <david.ahern@oracle.com> Tested-by: David Ahern <david.ahern@oracle.com> Signed-off-by: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: David S. Miller <davem@davemloft.net> CC: stable@vger.kernel.org # v3.19+ diff 3a9ad0b4 Wed May 27 18:23:51 MDT 2015 Yinghai Lu <yinghai@kernel.org> PCI: Add pci_bus_addr_t David Ahern reported that d63e2e1f3df9 ("sparc/PCI: Clip bridge windows to fit in upstream windows") fails to boot on sparc/T5-8: pci 0000:06:00.0: reg 0x184: can't handle BAR above 4GB (bus address 0x110204000) The problem is that sparc64 assumed that dma_addr_t only needed to hold DMA addresses, i.e., bus addresses returned via the DMA API (dma_map_single(), etc.), while the PCI core assumed dma_addr_t could hold *any* bus address, including raw BAR values. On sparc64, all DMA addresses fit in 32 bits, so dma_addr_t is a 32-bit type. However, BAR values can be 64 bits wide, so they don't fit in a dma_addr_t. d63e2e1f3df9 added new checking that tripped over this mismatch. Add pci_bus_addr_t, which is wide enough to hold any PCI bus address, including both raw BAR values and DMA addresses. This will be 64 bits on 64-bit platforms and on platforms with a 64-bit dma_addr_t. Then dma_addr_t only needs to be wide enough to hold addresses from the DMA API. [bhelgaas: changelog, bugzilla, Kconfig to ensure pci_bus_addr_t is at least as wide as dma_addr_t, documentation] Fixes: d63e2e1f3df9 ("sparc/PCI: Clip bridge windows to fit in upstream windows") Fixes: 23b13bc76f35 ("PCI: Fail safely if we can't handle BARs larger than 4GB") Link: http://lkml.kernel.org/r/CAE9FiQU1gJY1LYrxs+ma5LCTEEe4xmtjRG0aXJ9K_Tsu+m9Wuw@mail.gmail.com Link: http://lkml.kernel.org/r/1427857069-6789-1-git-send-email-yinghai@kernel.org Link: https://bugzilla.kernel.org/show_bug.cgi?id=96231 Reported-by: David Ahern <david.ahern@oracle.com> Tested-by: David Ahern <david.ahern@oracle.com> Signed-off-by: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: David S. Miller <davem@davemloft.net> CC: stable@vger.kernel.org # v3.19+ diff f75b99d5 Fri Dec 20 09:57:37 MST 2013 Yinghai Lu <yinghai@kernel.org> PCI: Enforce bus address limits in resource allocation When allocating space for 32-bit BARs, we previously limited RESOURCE addresses so they would fit in 32 bits. However, the BUS address need not be the same as the resource address, and it's the bus address that must fit in the 32-bit BAR. This patch adds: - pci_clip_resource_to_region(), which clips a resource so it contains only the range that maps to the specified bus address region, e.g., to clip a resource to 32-bit bus addresses, and - pci_bus_alloc_from_region(), which allocates space for a resource from the specified bus address region, and changes pci_bus_alloc_resource() to allocate space for 64-bit BARs from the entire bus address region, and space for 32-bit BARs from only the bus address region below 4GB. If we had this window: pci_root HWP0002:0a: host bridge window [mem 0xf0180000000-0xf01fedfffff] (bus address [0x80000000-0xfedfffff]) we previously could not put a 32-bit BAR there, because the CPU addresses don't fit in 32 bits. This patch fixes this, so we can use this space for 32-bit BARs. It's also possible (though unlikely) to have resources with 32-bit CPU addresses but bus addresses above 4GB. In this case the previous code would allocate space that a 32-bit BAR could not map. Remove PCIBIOS_MAX_MEM_32, which is no longer used. [bhelgaas: reworked starting from http://lkml.kernel.org/r/1386658484-15774-3-git-send-email-yinghai@kernel.org] Signed-off-by: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> diff 3c449ed0 Sat Nov 03 22:39:31 MDT 2012 Yinghai Lu <yinghai@kernel.org> PCI/ACPI: Reserve firmware-allocated resources for hot-added root buses Firmware may have assigned PCI BARs for hot-added devices, so reserve those resources before trying to allocate more. [bhelgaas: move empty weak definition here] Signed-off-by: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> |
H A D | probe.c | diff 17423360 Fri Feb 23 13:58:50 MST 2024 David E. Box <david.e.box@linux.intel.com> PCI/ASPM: Save L1 PM Substates Capability for suspend/resume 4ff116d0d5fd ("PCI/ASPM: Save L1 PM Substates Capability for suspend/resume") restored the L1 PM Substates Capability after resume, which reduced power consumption by making the ASPM L1.x states work after resume. a7152be79b62 ("Revert "PCI/ASPM: Save L1 PM Substates Capability for suspend/resume"") reverted 4ff116d0d5fd because resume failed on some systems, so power consumption after resume increased again. a7152be79b62 mentioned that we restore L1 PM substate configuration even though ASPM L1 may already be enabled. This is due the fact that the pci_restore_aspm_l1ss_state() was called before pci_restore_pcie_state(). Save and restore the L1 PM Substates Capability, following PCIe r6.1, sec 5.5.4 more closely by: 1) Do not restore ASPM configuration in pci_restore_pcie_state() but do that after PCIe capability is restored in pci_restore_aspm_state() following PCIe r6.1, sec 5.5.4. 2) If BIOS reenables L1SS, particularly L1.2, we need to clear the enables in the right order, downstream before upstream. Defer restoring the L1SS config until we are at the downstream component. Then update the config for both ends of the link in the prescribed order. 3) Program ASPM L1 PM substate configuration before L1 enables. 4) Program ASPM L1 PM substate enables last, after rest of the fields in the capability are programmed. [bhelgaas: commit log, squash L1SS-related patches, do both LNKCTL restores in pci_restore_pcie_state()] Link: https://lore.kernel.org/r/20240128233212.1139663-3-david.e.box@linux.intel.com Link: https://lore.kernel.org/r/20240128233212.1139663-4-david.e.box@linux.intel.com Link: https://lore.kernel.org/r/20240223205851.114931-5-helgaas@kernel.org Closes: https://bugzilla.kernel.org/show_bug.cgi?id=217321 Link: https://bugzilla.kernel.org/show_bug.cgi?id=216782 Link: https://bugzilla.kernel.org/show_bug.cgi?id=216877 Co-developed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Co-developed-by: David E. Box <david.e.box@linux.intel.com> Reported-by: Koba Ko <koba.ko@canonical.com> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: David E. Box <david.e.box@linux.intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Tested-by: Tasev Nikola <tasev.stefanoska@skynet.be> # Asus UX305FA Cc: Mark Enriquez <enriquezmark36@gmail.com> Cc: Thomas Witt <kernel@witt.link> Cc: Werner Sembach <wse@tuxedocomputers.com> Cc: Vidya Sagar <vidyas@nvidia.com> diff 17423360 Fri Feb 23 13:58:50 MST 2024 David E. Box <david.e.box@linux.intel.com> PCI/ASPM: Save L1 PM Substates Capability for suspend/resume 4ff116d0d5fd ("PCI/ASPM: Save L1 PM Substates Capability for suspend/resume") restored the L1 PM Substates Capability after resume, which reduced power consumption by making the ASPM L1.x states work after resume. a7152be79b62 ("Revert "PCI/ASPM: Save L1 PM Substates Capability for suspend/resume"") reverted 4ff116d0d5fd because resume failed on some systems, so power consumption after resume increased again. a7152be79b62 mentioned that we restore L1 PM substate configuration even though ASPM L1 may already be enabled. This is due the fact that the pci_restore_aspm_l1ss_state() was called before pci_restore_pcie_state(). Save and restore the L1 PM Substates Capability, following PCIe r6.1, sec 5.5.4 more closely by: 1) Do not restore ASPM configuration in pci_restore_pcie_state() but do that after PCIe capability is restored in pci_restore_aspm_state() following PCIe r6.1, sec 5.5.4. 2) If BIOS reenables L1SS, particularly L1.2, we need to clear the enables in the right order, downstream before upstream. Defer restoring the L1SS config until we are at the downstream component. Then update the config for both ends of the link in the prescribed order. 3) Program ASPM L1 PM substate configuration before L1 enables. 4) Program ASPM L1 PM substate enables last, after rest of the fields in the capability are programmed. [bhelgaas: commit log, squash L1SS-related patches, do both LNKCTL restores in pci_restore_pcie_state()] Link: https://lore.kernel.org/r/20240128233212.1139663-3-david.e.box@linux.intel.com Link: https://lore.kernel.org/r/20240128233212.1139663-4-david.e.box@linux.intel.com Link: https://lore.kernel.org/r/20240223205851.114931-5-helgaas@kernel.org Closes: https://bugzilla.kernel.org/show_bug.cgi?id=217321 Link: https://bugzilla.kernel.org/show_bug.cgi?id=216782 Link: https://bugzilla.kernel.org/show_bug.cgi?id=216877 Co-developed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Co-developed-by: David E. Box <david.e.box@linux.intel.com> Reported-by: Koba Ko <koba.ko@canonical.com> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: David E. Box <david.e.box@linux.intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Tested-by: Tasev Nikola <tasev.stefanoska@skynet.be> # Asus UX305FA Cc: Mark Enriquez <enriquezmark36@gmail.com> Cc: Thomas Witt <kernel@witt.link> Cc: Werner Sembach <wse@tuxedocomputers.com> Cc: Vidya Sagar <vidyas@nvidia.com> diff dc4e6f21 Sat Nov 06 05:26:06 MDT 2021 Puranjay Mohan <puranjay12@gmail.com> PCI: Use resource names in PCI log messages Use the pci_resource_name() to get the name of the resource and use it while printing log messages. [bhelgaas: rename to match struct resource * names, also use names in other BAR messages] Link: https://lore.kernel.org/r/20211106112606.192563-3-puranjay12@gmail.com Signed-off-by: Puranjay Mohan <puranjay12@gmail.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> diff 5e70d0ac Mon Jul 17 06:04:53 MDT 2023 Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> PCI: Add locking to RMW PCI Express Capability Register accessors Many places in the kernel write the Link Control and Root Control PCI Express Capability Registers without proper concurrency control and this could result in losing the changes one of the writers intended to make. Add pcie_cap_lock spinlock into the struct pci_dev and use it to protect bit changes made in the RMW capability accessors. Protect only a selected set of registers by differentiating the RMW accessor internally to locked/unlocked variants using a wrapper which has the same signature as pcie_capability_clear_and_set_word(). As the Capability Register (pos) given to the wrapper is always a constant, the compiler should be able to simplify all the dead-code away. So far only the Link Control Register (ASPM, hotplug, link retraining, various drivers) and the Root Control Register (AER & PME) seem to require RMW locking. Suggested-by: Lukas Wunner <lukas@wunner.de> Fixes: c7f486567c1d ("PCI PM: PCIe PME root port service driver") Fixes: f12eb72a268b ("PCI/ASPM: Use PCI Express Capability accessors") Fixes: 7d715a6c1ae5 ("PCI: add PCI Express ASPM support") Fixes: affa48de8417 ("staging/rdma/hfi1: Add support for enabling/disabling PCIe ASPM") Fixes: 849a9366cba9 ("misc: rtsx: Add support new chip rts5228 mmc: rtsx: Add support MMC_CAP2_NO_MMC") Fixes: 3d1e7aa80d1c ("misc: rtsx: Use pcie_capability_clear_and_set_word() for PCI_EXP_LNKCTL") Fixes: c0e5f4e73a71 ("misc: rtsx: Add support for RTS5261") Fixes: 3df4fce739e2 ("misc: rtsx: separate aspm mode into MODE_REG and MODE_CFG") Fixes: 121e9c6b5c4c ("misc: rtsx: modify and fix init_hw function") Fixes: 19f3bd548f27 ("mfd: rtsx: Remove LCTLR defination") Fixes: 773ccdfd9cc6 ("mfd: rtsx: Read vendor setting from config space") Fixes: 8275b77a1513 ("mfd: rts5249: Add support for RTS5250S power saving") Fixes: 5da4e04ae480 ("misc: rtsx: Add support for RTS5260") Fixes: 0f49bfbd0f2e ("tg3: Use PCI Express Capability accessors") Fixes: 5e7dfd0fb94a ("tg3: Prevent corruption at 10 / 100Mbps w CLKREQ") Fixes: b726e493e8dc ("r8169: sync existing 8168 device hardware start sequences with vendor driver") Fixes: e6de30d63eb1 ("r8169: more 8168dp support.") Fixes: 8a06127602de ("Bluetooth: hci_bcm4377: Add new driver for BCM4377 PCIe boards") Fixes: 6f461f6c7c96 ("e1000e: enable/disable ASPM L0s and L1 and ERT according to hardware errata") Fixes: 1eae4eb2a1c7 ("e1000e: Disable L1 ASPM power savings for 82573 mobile variants") Fixes: 8060e169e02f ("ath9k: Enable extended synch for AR9485 to fix L0s recovery issue") Fixes: 69ce674bfa69 ("ath9k: do btcoex ASPM disabling at initialization time") Fixes: f37f05503575 ("mt76: mt76x2e: disable pcie_aspm by default") Link: https://lore.kernel.org/r/20230717120503.15276-2-ilpo.jarvinen@linux.intel.com Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: "Rafael J. Wysocki" <rafael@kernel.org> diff 5e70d0ac Mon Jul 17 06:04:53 MDT 2023 Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> PCI: Add locking to RMW PCI Express Capability Register accessors Many places in the kernel write the Link Control and Root Control PCI Express Capability Registers without proper concurrency control and this could result in losing the changes one of the writers intended to make. Add pcie_cap_lock spinlock into the struct pci_dev and use it to protect bit changes made in the RMW capability accessors. Protect only a selected set of registers by differentiating the RMW accessor internally to locked/unlocked variants using a wrapper which has the same signature as pcie_capability_clear_and_set_word(). As the Capability Register (pos) given to the wrapper is always a constant, the compiler should be able to simplify all the dead-code away. So far only the Link Control Register (ASPM, hotplug, link retraining, various drivers) and the Root Control Register (AER & PME) seem to require RMW locking. Suggested-by: Lukas Wunner <lukas@wunner.de> Fixes: c7f486567c1d ("PCI PM: PCIe PME root port service driver") Fixes: f12eb72a268b ("PCI/ASPM: Use PCI Express Capability accessors") Fixes: 7d715a6c1ae5 ("PCI: add PCI Express ASPM support") Fixes: affa48de8417 ("staging/rdma/hfi1: Add support for enabling/disabling PCIe ASPM") Fixes: 849a9366cba9 ("misc: rtsx: Add support new chip rts5228 mmc: rtsx: Add support MMC_CAP2_NO_MMC") Fixes: 3d1e7aa80d1c ("misc: rtsx: Use pcie_capability_clear_and_set_word() for PCI_EXP_LNKCTL") Fixes: c0e5f4e73a71 ("misc: rtsx: Add support for RTS5261") Fixes: 3df4fce739e2 ("misc: rtsx: separate aspm mode into MODE_REG and MODE_CFG") Fixes: 121e9c6b5c4c ("misc: rtsx: modify and fix init_hw function") Fixes: 19f3bd548f27 ("mfd: rtsx: Remove LCTLR defination") Fixes: 773ccdfd9cc6 ("mfd: rtsx: Read vendor setting from config space") Fixes: 8275b77a1513 ("mfd: rts5249: Add support for RTS5250S power saving") Fixes: 5da4e04ae480 ("misc: rtsx: Add support for RTS5260") Fixes: 0f49bfbd0f2e ("tg3: Use PCI Express Capability accessors") Fixes: 5e7dfd0fb94a ("tg3: Prevent corruption at 10 / 100Mbps w CLKREQ") Fixes: b726e493e8dc ("r8169: sync existing 8168 device hardware start sequences with vendor driver") Fixes: e6de30d63eb1 ("r8169: more 8168dp support.") Fixes: 8a06127602de ("Bluetooth: hci_bcm4377: Add new driver for BCM4377 PCIe boards") Fixes: 6f461f6c7c96 ("e1000e: enable/disable ASPM L0s and L1 and ERT according to hardware errata") Fixes: 1eae4eb2a1c7 ("e1000e: Disable L1 ASPM power savings for 82573 mobile variants") Fixes: 8060e169e02f ("ath9k: Enable extended synch for AR9485 to fix L0s recovery issue") Fixes: 69ce674bfa69 ("ath9k: do btcoex ASPM disabling at initialization time") Fixes: f37f05503575 ("mt76: mt76x2e: disable pcie_aspm by default") Link: https://lore.kernel.org/r/20230717120503.15276-2-ilpo.jarvinen@linux.intel.com Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: "Rafael J. Wysocki" <rafael@kernel.org> diff a89c8224 Sun Jun 11 11:20:10 MDT 2023 Maciej W. Rozycki <macro@orcam.me.uk> PCI: Work around PCIe link training failures Attempt to handle cases such as with a downstream port of the ASMedia ASM2824 PCIe switch where link training never completes and the link continues switching between speeds indefinitely with the data link layer never reaching the active state. It has been observed with a downstream port of the ASMedia ASM2824 Gen 3 switch wired to the upstream port of the Pericom PI7C9X2G304 Gen 2 switch, using a Delock Riser Card PCI Express x1 > 2 x PCIe x1 device, P/N 41433, wired to a SiFive HiFive Unmatched board. In this setup the switches should negotiate a link speed of 5.0GT/s, falling back to 2.5GT/s if necessary. Instead the link continues oscillating between the two speeds, at the rate of 34-35 times per second, with link training reported repeatedly active ~84% of the time. Limiting the target link speed to 2.5GT/s with the upstream ASM2824 device makes the two switches communicate correctly. Removing the speed restriction afterwards makes the two devices switch to 5.0GT/s then. Make use of these observations and detect the inability to train the link by checking for the Data Link Layer Link Active status bit being off while the Link Bandwidth Management Status indicating that hardware has changed the link speed or width in an attempt to correct unreliable link operation. Restrict the speed to 2.5GT/s then with the Target Link Speed field, request a retrain and wait 200ms for the data link to go up. If this is successful, lift the restriction, letting the devices negotiate a higher speed. Also check for a 2.5GT/s speed restriction the firmware may have already arranged and lift it too with ports of devices known to continue working afterwards (currently only ASM2824), that already report their data link being up. [bhelgaas: reorder and squash stubs from https://lore.kernel.org/r/alpine.DEB.2.21.2306111619570.64925@angie.orcam.me.uk to avoid adding stubs that do nothing] Link: https://lore.kernel.org/r/alpine.DEB.2.21.2203022037020.56670@angie.orcam.me.uk/ Link: https://source.denx.de/u-boot/u-boot/-/commit/a398a51ccc68 Link: https://lore.kernel.org/r/alpine.DEB.2.21.2305310038540.59226@angie.orcam.me.uk Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> diff 49ad31e9 Mon Sep 05 02:02:28 MDT 2022 Mika Westerberg <mika.westerberg@linux.intel.com> PCI: Pass available buses even if the bridge is already configured If some part of the PCI topology is already configured (by the boot firmware) but not all, and it includes hotplug bridges, we may need to extend the bus resources of those bridges to accommodate any future hotplugs, in the same way we already do with the normal hotplug case. Pass the available buses to pci_scan_child_bus_extend() even when the bridge in question is already configured so the bus allocation code can use these available buses to extend the possible hotplug bridges below. Link: https://bugzilla.kernel.org/show_bug.cgi?id=216000 Link: https://lore.kernel.org/r/20220905080232.36087-3-mika.westerberg@linux.intel.com Reported-by: Chris Chiu <chris.chiu@canonical.com> Tested-by: Chris Chiu <chris.chiu@canonical.com> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> diff b559afd5 Tue Jul 19 14:52:45 MDT 2022 Ira Weiny <ira.weiny@intel.com> PCI: Replace magic constant for PCI Sig Vendor ID Replace the magic value in pci_bus_crs_vendor_id() with PCI_VENDOR_ID_PCI_SIG. Reviewed-by: Dan Williams <dan.j.williams@intel.com> Reviewed-by: Davidlohr Bueso <dave@stgolabs.net> Suggested-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Ira Weiny <ira.weiny@intel.com> Link: https://lore.kernel.org/r/20220719205249.566684-3-ira.weiny@intel.com Signed-off-by: Dan Williams <dan.j.williams@intel.com> diff fbed59ed Tue Jun 28 08:30:57 MDT 2022 Niklas Schnelle <schnelle@linux.ibm.com> PCI: Split out next_ari_fn() from next_fn() In commit b1bd58e448f2 ("PCI: Consolidate "next-function" functions") the next_fn() function subsumed the traditional and ARI-based next function determination. This got rid of some needlessly complex function pointer handling but also reduced the separation between these very different methods of finding the next function. With the next_fn() cleaned up a bit we can re-introduce this separation by moving out the ARI handling while sticking with direct function calls. Link: https://lore.kernel.org/r/20220628143100.3228092-3-schnelle@linux.ibm.com Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Pierre Morel <pmorel@linux.ibm.com> diff 41dd40fd Mon Jul 26 12:06:51 MDT 2021 Boqun Feng <boqun.feng@gmail.com> PCI: Support populating MSI domains of root buses via bridges Currently, at probing time, the MSI domains of root buses are populated if either the information of MSI domain is available from firmware (DT or ACPI), or arch-specific sysdata is used to pass the fwnode of the MSI domain. These two conditions don't cover all, e.g. Hyper-V virtual PCI on ARM64, which doesn't have the MSI information in the firmware and couldn't use arch-specific sysdata because running on an architecture with PCI_DOMAINS_GENERIC=y. To support populating MSI domains of the root buses at the probing when neither of the above condition is true, the ->msi_domain of the corresponding bridge device is used: in pci_host_bridge_msi_domain(), which should return the MSI domain of the root bus, the ->msi_domain of the corresponding bridge is fetched first as a potential value of the MSI domain of the root bus. In order to use the approach to populate MSI domains, the driver needs to dev_set_msi_domain() on the bridge before calling pci_register_host_bridge(), and makes sure GENERIC_MSI_IRQ_DOMAIN=y. Another advantage of this new approach is providing an arch-independent way to populate MSI domains, which allows sharing the driver code as much as possible between architectures. Originally-by: Arnd Bergmann <arnd@arndb.de> Link: https://lore.kernel.org/r/20210726180657.142727-3-boqun.feng@gmail.com Signed-off-by: Boqun Feng <boqun.feng@gmail.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Acked-by: Bjorn Helgaas <bhelgaas@google.com> |
Completed in 498 milliseconds