Searched +hist:2 +hist:e8d696b (Results 1 - 3 of 3) sorted by relevance
/linux-master/arch/arm/vdso/ | ||
H A D | Makefile | diff 56769ba4 Sat Oct 14 04:54:35 MDT 2023 Masahiro Yamada <masahiroy@kernel.org> kbuild: unify vdso_install rules Currently, there is no standard implementation for vdso_install, leading to various issues: 1. Code duplication Many architectures duplicate similar code just for copying files to the install destination. Some architectures (arm, sparc, x86) create build-id symlinks, introducing more code duplication. 2. Unintended updates of in-tree build artifacts The vdso_install rule depends on the vdso files to install. It may update in-tree build artifacts. This can be problematic, as explained in commit 19514fc665ff ("arm, kbuild: make "make install" not depend on vmlinux"). 3. Broken code in some architectures Makefile code is often copied from one architecture to another without proper adaptation. 'make vdso_install' for parisc does not work. 'make vdso_install' for s390 installs vdso64, but not vdso32. To address these problems, this commit introduces a generic vdso_install rule. Architectures that support vdso_install need to define vdso-install-y in arch/*/Makefile. vdso-install-y lists the files to install. For example, arch/x86/Makefile looks like this: vdso-install-$(CONFIG_X86_64) += arch/x86/entry/vdso/vdso64.so.dbg vdso-install-$(CONFIG_X86_X32_ABI) += arch/x86/entry/vdso/vdsox32.so.dbg vdso-install-$(CONFIG_X86_32) += arch/x86/entry/vdso/vdso32.so.dbg vdso-install-$(CONFIG_IA32_EMULATION) += arch/x86/entry/vdso/vdso32.so.dbg These files will be installed to $(MODLIB)/vdso/ with the .dbg suffix, if exists, stripped away. vdso-install-y can optionally take the second field after the colon separator. This is needed because some architectures install a vdso file as a different base name. The following is a snippet from arch/arm64/Makefile. vdso-install-$(CONFIG_COMPAT_VDSO) += arch/arm64/kernel/vdso32/vdso.so.dbg:vdso32.so This will rename vdso.so.dbg to vdso32.so during installation. If such architectures change their implementation so that the base names match, this workaround will go away. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Acked-by: Sven Schnelle <svens@linux.ibm.com> # s390 Reviewed-by: Nicolas Schier <nicolas@fjasle.eu> Reviewed-by: Guo Ren <guoren@kernel.org> Acked-by: Helge Deller <deller@gmx.de> # parisc Acked-by: Catalin Marinas <catalin.marinas@arm.com> Acked-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> diff d5d44e7e Sun Oct 25 16:50:09 MDT 2020 Linus Walleij <linus.walleij@linaro.org> ARM: 9013/2: Disable KASan instrumentation for some code Disable instrumentation for arch/arm/boot/compressed/* since that code is executed before the kernel has even set up its mappings and definately out of scope for KASan. Disable instrumentation of arch/arm/vdso/* because that code is not linked with the kernel image, so the KASan management code would fail to link. Disable instrumentation of arch/arm/mm/physaddr.c. See commit ec6d06efb0ba ("arm64: Add support for CONFIG_DEBUG_VIRTUAL") for more details. Disable kasan check in the function unwind_pop_register because it does not matter that kasan checks failed when unwind_pop_register() reads the stack memory of a task. Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Alexander Potapenko <glider@google.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: kasan-dev@googlegroups.com Reviewed-by: Ard Biesheuvel <ardb@kernel.org> Tested-by: Ard Biesheuvel <ardb@kernel.org> # QEMU/KVM/mach-virt/LPAE/8G Tested-by: Florian Fainelli <f.fainelli@gmail.com> # Brahma SoCs Tested-by: Ahmad Fatoum <a.fatoum@pengutronix.de> # i.MX6Q Reported-by: Florian Fainelli <f.fainelli@gmail.com> Reported-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Abbott Liu <liuwenliang@huawei.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> diff b2441318 Wed Nov 01 08:07:57 MDT 2017 Greg Kroah-Hartman <gregkh@linuxfoundation.org> License cleanup: add SPDX GPL-2.0 license identifier to files with no license Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> diff b2441318 Wed Nov 01 08:07:57 MDT 2017 Greg Kroah-Hartman <gregkh@linuxfoundation.org> License cleanup: add SPDX GPL-2.0 license identifier to files with no license Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> diff 2e8d696b Sat Mar 12 17:13:55 MST 2016 Masahiro Yamada <yamada.masahiro@socionext.com> kbuild: drop FORCE from PHONY targets These targets are marked as PHONY. No need to add FORCE to their dependency. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Michal Marek <mmarek@suse.com> diff 2e8d696b Sat Mar 12 17:13:55 MST 2016 Masahiro Yamada <yamada.masahiro@socionext.com> kbuild: drop FORCE from PHONY targets These targets are marked as PHONY. No need to add FORCE to their dependency. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Michal Marek <mmarek@suse.com> |
/linux-master/arch/x86/entry/vdso/ | ||
H A D | Makefile | diff 31a4ebee Tue Nov 21 16:56:58 MST 2023 Masahiro Yamada <masahiroy@kernel.org> x86/vdso: Consolidate targets and clean-files 'targets' and 'clean-files' do not need to list the same files because the files listed in 'targets' are cleaned up. Refactor the code. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de> Link: https://lore.kernel.org/r/20231121235701.239606-2-masahiroy@kernel.org diff 56769ba4 Sat Oct 14 04:54:35 MDT 2023 Masahiro Yamada <masahiroy@kernel.org> kbuild: unify vdso_install rules Currently, there is no standard implementation for vdso_install, leading to various issues: 1. Code duplication Many architectures duplicate similar code just for copying files to the install destination. Some architectures (arm, sparc, x86) create build-id symlinks, introducing more code duplication. 2. Unintended updates of in-tree build artifacts The vdso_install rule depends on the vdso files to install. It may update in-tree build artifacts. This can be problematic, as explained in commit 19514fc665ff ("arm, kbuild: make "make install" not depend on vmlinux"). 3. Broken code in some architectures Makefile code is often copied from one architecture to another without proper adaptation. 'make vdso_install' for parisc does not work. 'make vdso_install' for s390 installs vdso64, but not vdso32. To address these problems, this commit introduces a generic vdso_install rule. Architectures that support vdso_install need to define vdso-install-y in arch/*/Makefile. vdso-install-y lists the files to install. For example, arch/x86/Makefile looks like this: vdso-install-$(CONFIG_X86_64) += arch/x86/entry/vdso/vdso64.so.dbg vdso-install-$(CONFIG_X86_X32_ABI) += arch/x86/entry/vdso/vdsox32.so.dbg vdso-install-$(CONFIG_X86_32) += arch/x86/entry/vdso/vdso32.so.dbg vdso-install-$(CONFIG_IA32_EMULATION) += arch/x86/entry/vdso/vdso32.so.dbg These files will be installed to $(MODLIB)/vdso/ with the .dbg suffix, if exists, stripped away. vdso-install-y can optionally take the second field after the colon separator. This is needed because some architectures install a vdso file as a different base name. The following is a snippet from arch/arm64/Makefile. vdso-install-$(CONFIG_COMPAT_VDSO) += arch/arm64/kernel/vdso32/vdso.so.dbg:vdso32.so This will rename vdso.so.dbg to vdso32.so during installation. If such architectures change their implementation so that the base names match, this workaround will go away. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Acked-by: Sven Schnelle <svens@linux.ibm.com> # s390 Reviewed-by: Nicolas Schier <nicolas@fjasle.eu> Reviewed-by: Guo Ren <guoren@kernel.org> Acked-by: Helge Deller <deller@gmx.de> # parisc Acked-by: Catalin Marinas <catalin.marinas@arm.com> Acked-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> diff f143ff39 Thu Sep 08 15:54:43 MDT 2022 Sami Tolvanen <samitolvanen@google.com> treewide: Filter out CC_FLAGS_CFI In preparation for removing CC_FLAGS_CFI from CC_FLAGS_LTO, explicitly filter out CC_FLAGS_CFI in all the makefiles where we currently filter out CC_FLAGS_LTO. Signed-off-by: Sami Tolvanen <samitolvanen@google.com> Reviewed-by: Kees Cook <keescook@chromium.org> Tested-by: Kees Cook <keescook@chromium.org> Tested-by: Nathan Chancellor <nathan@kernel.org> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Tested-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Kees Cook <keescook@chromium.org> Link: https://lore.kernel.org/r/20220908215504.3686827-2-samitolvanen@google.com diff e9a1379f Fri Jul 12 04:15:55 MDT 2019 Naohiro Aota <naohiro.aota@wdc.com> x86/vdso: Fix flip/flop vdso build bug Two consecutive "make" on an already compiled kernel tree will show different behavior: $ make CALL scripts/checksyscalls.sh CALL scripts/atomic/check-atomics.sh DESCEND objtool CHK include/generated/compile.h VDSOCHK arch/x86/entry/vdso/vdso64.so.dbg VDSOCHK arch/x86/entry/vdso/vdso32.so.dbg Kernel: arch/x86/boot/bzImage is ready (#3) Building modules, stage 2. MODPOST 12 modules $ make make CALL scripts/checksyscalls.sh CALL scripts/atomic/check-atomics.sh DESCEND objtool CHK include/generated/compile.h VDSO arch/x86/entry/vdso/vdso64.so.dbg OBJCOPY arch/x86/entry/vdso/vdso64.so VDSO2C arch/x86/entry/vdso/vdso-image-64.c CC arch/x86/entry/vdso/vdso-image-64.o VDSO arch/x86/entry/vdso/vdso32.so.dbg OBJCOPY arch/x86/entry/vdso/vdso32.so VDSO2C arch/x86/entry/vdso/vdso-image-32.c CC arch/x86/entry/vdso/vdso-image-32.o AR arch/x86/entry/vdso/built-in.a AR arch/x86/entry/built-in.a AR arch/x86/built-in.a GEN .version CHK include/generated/compile.h UPD include/generated/compile.h CC init/version.o AR init/built-in.a LD vmlinux.o <snip> This is causing "LD vmlinux" once every two times even without any modifications. This is the same bug fixed in commit 92a4728608a8 ("x86/boot: Fix if_changed build flip/flop bug"). Two "if_changed" cannot be used in one target. Fix this merging two commands into one function. Fixes: 7ac870747988 ("x86/vdso: Switch to generic vDSO implementation") Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Vincenzo Frascino <vincenzo.frascino@arm.com> Reviewed-by: Vincenzo Frascino <vincenzo.frascino@arm.com> Reviewed-by: Masahiro Yamada <yamada.masahiro@socionext.com> Link: https://lkml.kernel.org/r/20190712101556.17833-1-naohiro.aota@wdc.com diff ac3e233d Thu Dec 06 12:12:31 MST 2018 Nick Desaulniers <ndesaulniers@google.com> x86/vdso: Drop implicit common-page-size linker flag GNU linker's -z common-page-size's default value is based on the target architecture. arch/x86/entry/vdso/Makefile sets it to the architecture default, which is implicit and redundant. Drop it. Fixes: 2aae950b21e4 ("x86_64: Add vDSO for x86-64 with gettimeofday/clock_gettime/getcpu") Reported-by: Dmitry Golovin <dima@golovin.in> Reported-by: Bill Wendling <morbo@google.com> Suggested-by: Dmitry Golovin <dima@golovin.in> Suggested-by: Rui Ueyama <ruiu@google.com> Signed-off-by: Nick Desaulniers <ndesaulniers@google.com> Signed-off-by: Borislav Petkov <bp@suse.de> Acked-by: Andy Lutomirski <luto@kernel.org> Cc: Andi Kleen <andi@firstfloor.org> Cc: Fangrui Song <maskray@google.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: x86-ml <x86@kernel.org> Link: https://lkml.kernel.org/r/20181206191231.192355-1-ndesaulniers@google.com Link: https://bugs.llvm.org/show_bug.cgi?id=38774 Link: https://github.com/ClangBuiltLinux/linux/issues/31 diff 4f166564 Tue Oct 02 22:26:50 MDT 2018 Andy Lutomirski <luto@kernel.org> x86/vdso: Only enable vDSO retpolines when enabled and supported When I fixed the vDSO build to use inline retpolines, I messed up the Makefile logic and made it unconditional. It should have depended on CONFIG_RETPOLINE and on the availability of compiler support. This broke the build on some older compilers. Reported-by: nikola.ciprich@linuxbox.cz Signed-off-by: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Matt Rickard <matt@softrans.com.au> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: jason.vas.dias@gmail.com Cc: stable@vger.kernel.org Fixes: 2e549b2ee0e3 ("x86/vdso: Fix vDSO build if a retpoline is emitted") Link: http://lkml.kernel.org/r/08a1f29f2c238dd1f493945e702a521f8a5aa3ae.1538540801.git.luto@kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org> diff 2e549b2e Thu Aug 16 01:41:15 MDT 2018 Andy Lutomirski <luto@kernel.org> x86/vdso: Fix vDSO build if a retpoline is emitted Currently, if the vDSO ends up containing an indirect branch or call, GCC will emit the "external thunk" style of retpoline, and it will fail to link. Fix it by building the vDSO with inline retpoline thunks. I haven't seen any reports of this triggering on an unpatched kernel. Fixes: commit 76b043848fd2 ("x86/retpoline: Add initial retpoline support") Signed-off-by: Andy Lutomirski <luto@kernel.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Matt Rickard <matt@softrans.com.au> Cc: Borislav Petkov <bp@alien8.de> Cc: Jason Vas Dias <jason.vas.dias@gmail.com> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Andi Kleen <ak@linux.intel.com> Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/c76538cd3afbe19c6246c2d1715bc6a60bd63985.1534448381.git.luto@kernel.org diff b3656612 Mon May 14 20:52:22 MDT 2018 Masahiro Yamada <yamada.masahiro@socionext.com> x86/build/vdso: Remove unused $(vobjs-nox32) in Makefile Since commit bfad381c0d1e ("x86/vdso: Improve the fake section headers"), $(vobjs-nox32) is empty. Therefore, $(vobjs64-for-x32) is the same as $(vobjs-y). Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/1526352744-28229-2-git-send-email-yamada.masahiro@socionext.com Signed-off-by: Ingo Molnar <mingo@kernel.org> diff 54a702f7 Fri Mar 23 07:04:39 MDT 2018 Masahiro Yamada <yamada.masahiro@socionext.com> kbuild: mark $(targets) as .SECONDARY and remove .PRECIOUS markers GNU Make automatically deletes intermediate files that are updated in a chain of pattern rules. Example 1) %.dtb.o <- %.dtb.S <- %.dtb <- %.dts Example 2) %.o <- %.c <- %.c_shipped A couple of makefiles mark such targets as .PRECIOUS to prevent Make from deleting them, but the correct way is to use .SECONDARY. .SECONDARY Prerequisites of this special target are treated as intermediate files but are never automatically deleted. .PRECIOUS When make is interrupted during execution, it may delete the target file it is updating if the file was modified since make started. If you mark the file as precious, make will never delete the file if interrupted. Both can avoid deletion of intermediate files, but the difference is the behavior when Make is interrupted; .SECONDARY deletes the target, but .PRECIOUS does not. The use of .PRECIOUS is relatively rare since we do not want to keep partially constructed (possibly corrupted) targets. Another difference is that .PRECIOUS works with pattern rules whereas .SECONDARY does not. .PRECIOUS: $(obj)/%.lex.c works, but .SECONDARY: $(obj)/%.lex.c has no effect. However, for the reason above, I do not want to use .PRECIOUS which could cause obscure build breakage. The targets specified as .SECONDARY must be explicit. $(targets) contains all targets that need to include .*.cmd files. So, the intermediates you want to keep are mostly in there. Therefore, mark $(targets) as .SECONDARY. It means primary targets are also marked as .SECONDARY, but I do not see any drawback for this. I replaced some .SECONDARY / .PRECIOUS markers with 'targets'. This will make Kbuild search for non-existing .*.cmd files, but this is not a noticeable performance issue. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by: Frank Rowand <frowand.list@gmail.com> Acked-by: Ingo Molnar <mingo@kernel.org> diff 8a78756e Mon Nov 13 03:29:37 MST 2017 Masahiro Yamada <yamada.masahiro@socionext.com> kbuild: create object directories simpler and faster For the out-of-tree build, scripts/Makefile.build creates output directories, but this operation is not efficient. scripts/Makefile.lib calculates obj-dirs as follows: obj-dirs := $(dir $(multi-objs) $(obj-y)) Please notice $(sort ...) is not used here. Usually the result is as many "./" as objects here. For a lot of duplicated paths, the following command is invoked. _dummy := $(foreach d,$(obj-dirs), $(shell [ -d $(d) ] || mkdir -p $(d))) Then, the costly shell command is run over and over again. I see many points for optimization: [1] Use $(sort ...) to cut down duplicated paths before passing them to system call [2] Use single $(shell ...) instead of repeating it with $(foreach ...) This will reduce forking. [3] We can calculate obj-dirs more simply. Most of objects are already accumulated in $(targets). So, $(dir $(targets)) is fine and more comprehensive. I also removed ugly code in arch/x86/entry/vdso/Makefile. This is now really unnecessary. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by: Ingo Molnar <mingo@kernel.org> Tested-by: Douglas Anderson <dianders@chromium.org> |
/linux-master/ | ||
H A D | Makefile | diff c6d9a4a9 Thu Jan 25 15:55:08 MST 2024 Nathan Chancellor <nathan@kernel.org> Makefile: drop warn-stack-size plugin opt Now that the minimum supported version of LLVM for building the kernel has been bumped to 13.0.1, the inner ifeq statement is always false, as the build will fail during the configuration stage for older LLVM versions. This effectively reverts commit 24845dcb170e ("Makefile: LTO: have linker check -Wframe-larger-than") and its follow up fix, commit 0236526d76b8 ("Makefile: lto: Pass -warn-stack-size only on LLD < 13.0.0"). Link: https://lkml.kernel.org/r/20240125-bump-min-llvm-ver-to-13-0-1-v1-2-f5ff9bda41c5@kernel.org Signed-off-by: Nathan Chancellor <nathan@kernel.org> Reviewed-by: Kees Cook <keescook@chromium.org> Cc: Albert Ou <aou@eecs.berkeley.edu> Cc: "Aneesh Kumar K.V (IBM)" <aneesh.kumar@kernel.org> Cc: Ard Biesheuvel <ardb@kernel.org> Cc: Borislav Petkov (AMD) <bp@alien8.de> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Conor Dooley <conor@kernel.org> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Masahiro Yamada <masahiroy@kernel.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: "Naveen N. Rao" <naveen.n.rao@linux.ibm.com> Cc: Nicholas Piggin <npiggin@gmail.com> Cc: Nicolas Schier <nicolas@fjasle.eu> Cc: Palmer Dabbelt <palmer@dabbelt.com> Cc: Paul Walmsley <paul.walmsley@sifive.com> Cc: Russell King <linux@armlinux.org.uk> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Will Deacon <will@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> diff f82811e2 Fri Oct 20 09:50:55 MDT 2023 Jamie Cunliffe <Jamie.Cunliffe@arm.com> rust: Refactor the build target to allow the use of builtin targets Eventually we want all architectures to be using the target as defined by rustc. However currently some architectures can't do that and are using the target.json specification. This puts in place the foundation to allow the use of the builtin target definition or a target.json specification. Signed-off-by: Jamie Cunliffe <Jamie.Cunliffe@arm.com> Acked-by: Masahiro Yamada <masahiroy@kernel.org> Tested-by: Alice Ryhl <aliceryhl@google.com> Link: https://lore.kernel.org/r/20231020155056.3495121-2-Jamie.Cunliffe@arm.com [catalin.marinas@arm.com: squashed loongarch ifneq fix from WANG Rui] Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> diff ecab4115 Fri Feb 16 17:26:37 MST 2024 Miguel Ojeda <ojeda@kernel.org> kbuild: mark `rustc` (and others) invocations as recursive `rustc` (like Cargo) may take advantage of the jobserver at any time (e.g. for backend parallelism, or eventually frontend too). In the kernel, we call `rustc` with `-Ccodegen-units=1` (and `-Zthreads` is 1 so far), so we do not expect parallelism. However, in the upcoming Rust 1.76.0, a warning is emitted by `rustc` [1] when it cannot connect to the jobserver it was passed (in many cases, but not all: compiling and `--print sysroot` do, but `--version` does not). And given GNU Make always passes the jobserver in the environment variable (even when a line is deemed non-recursive), `rustc` will end up complaining about it (in particular in Make 4.3 where there is only the simple pipe jobserver style). One solution is to remove the jobserver from `MAKEFLAGS`. However, we can mark the lines with calls to `rustc` (and Cargo) as recursive, which looks simpler. This is being documented as a recommendation in `rustc` [2] and allows us to be ready for the time we may use parallelism inside `rustc` (potentially now, if a user passes `-Zthreads`). Thus do so. Similarly, do the same for `rustdoc` and `cargo` calls. Finally, there is one case that the solution does not cover, which is the `$(shell ...)` call we have. Thus, for that one, set an empty `MAKEFLAGS` environment variable. Link: https://github.com/rust-lang/rust/issues/120515 [1] Acked-by: Masahiro Yamada <masahiroy@kernel.org> Link: https://github.com/rust-lang/rust/pull/121564 [2] Link: https://lore.kernel.org/r/20240217002638.57373-1-ojeda@kernel.org [ Reworded to add link to PR documenting the recommendation. ] Signed-off-by: Miguel Ojeda <ojeda@kernel.org> diff ecab4115 Fri Feb 16 17:26:37 MST 2024 Miguel Ojeda <ojeda@kernel.org> kbuild: mark `rustc` (and others) invocations as recursive `rustc` (like Cargo) may take advantage of the jobserver at any time (e.g. for backend parallelism, or eventually frontend too). In the kernel, we call `rustc` with `-Ccodegen-units=1` (and `-Zthreads` is 1 so far), so we do not expect parallelism. However, in the upcoming Rust 1.76.0, a warning is emitted by `rustc` [1] when it cannot connect to the jobserver it was passed (in many cases, but not all: compiling and `--print sysroot` do, but `--version` does not). And given GNU Make always passes the jobserver in the environment variable (even when a line is deemed non-recursive), `rustc` will end up complaining about it (in particular in Make 4.3 where there is only the simple pipe jobserver style). One solution is to remove the jobserver from `MAKEFLAGS`. However, we can mark the lines with calls to `rustc` (and Cargo) as recursive, which looks simpler. This is being documented as a recommendation in `rustc` [2] and allows us to be ready for the time we may use parallelism inside `rustc` (potentially now, if a user passes `-Zthreads`). Thus do so. Similarly, do the same for `rustdoc` and `cargo` calls. Finally, there is one case that the solution does not cover, which is the `$(shell ...)` call we have. Thus, for that one, set an empty `MAKEFLAGS` environment variable. Link: https://github.com/rust-lang/rust/issues/120515 [1] Acked-by: Masahiro Yamada <masahiroy@kernel.org> Link: https://github.com/rust-lang/rust/pull/121564 [2] Link: https://lore.kernel.org/r/20240217002638.57373-1-ojeda@kernel.org [ Reworded to add link to PR documenting the recommendation. ] Signed-off-by: Miguel Ojeda <ojeda@kernel.org> diff 3b9ab248 Thu Feb 01 18:31:42 MST 2024 Masahiro Yamada <masahiroy@kernel.org> kbuild: use 4-space indentation when followed by conditionals GNU Make manual [1] clearly forbids a tab at the beginning of the conditional directive line: "Extra spaces are allowed and ignored at the beginning of the conditional directive line, but a tab is not allowed." This will not work for the next release of GNU Make, hence commit 82175d1f9430 ("kbuild: Replace tabs with spaces when followed by conditionals") replaced the inappropriate tabs with 8 spaces. However, the 8-space indentation cannot be visually distinguished. Linus suggested 2-4 spaces for those nested if-statements. [2] This commit redoes the replacement with 4 spaces. [1]: https://www.gnu.org/software/make/manual/make.html#Conditional-Syntax [2]: https://lore.kernel.org/all/CAHk-=whJKZNZWsa-VNDKafS_VfY4a5dAjG-r8BZgWk_a-xSepw@mail.gmail.com/ Suggested-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> diff 3b9ab248 Thu Feb 01 18:31:42 MST 2024 Masahiro Yamada <masahiroy@kernel.org> kbuild: use 4-space indentation when followed by conditionals GNU Make manual [1] clearly forbids a tab at the beginning of the conditional directive line: "Extra spaces are allowed and ignored at the beginning of the conditional directive line, but a tab is not allowed." This will not work for the next release of GNU Make, hence commit 82175d1f9430 ("kbuild: Replace tabs with spaces when followed by conditionals") replaced the inappropriate tabs with 8 spaces. However, the 8-space indentation cannot be visually distinguished. Linus suggested 2-4 spaces for those nested if-statements. [2] This commit redoes the replacement with 4 spaces. [1]: https://www.gnu.org/software/make/manual/make.html#Conditional-Syntax [2]: https://lore.kernel.org/all/CAHk-=whJKZNZWsa-VNDKafS_VfY4a5dAjG-r8BZgWk_a-xSepw@mail.gmail.com/ Suggested-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> diff 3b9ab248 Thu Feb 01 18:31:42 MST 2024 Masahiro Yamada <masahiroy@kernel.org> kbuild: use 4-space indentation when followed by conditionals GNU Make manual [1] clearly forbids a tab at the beginning of the conditional directive line: "Extra spaces are allowed and ignored at the beginning of the conditional directive line, but a tab is not allowed." This will not work for the next release of GNU Make, hence commit 82175d1f9430 ("kbuild: Replace tabs with spaces when followed by conditionals") replaced the inappropriate tabs with 8 spaces. However, the 8-space indentation cannot be visually distinguished. Linus suggested 2-4 spaces for those nested if-statements. [2] This commit redoes the replacement with 4 spaces. [1]: https://www.gnu.org/software/make/manual/make.html#Conditional-Syntax [2]: https://lore.kernel.org/all/CAHk-=whJKZNZWsa-VNDKafS_VfY4a5dAjG-r8BZgWk_a-xSepw@mail.gmail.com/ Suggested-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> diff 82175d1f Sun Jan 28 08:10:39 MST 2024 Dmitry Goncharov <dgoncharov@users.sf.net> kbuild: Replace tabs with spaces when followed by conditionals This is needed for the future (post make-4.4.1) versions of gnu make. Starting from https://git.savannah.gnu.org/cgit/make.git/commit/?id=07fcee35f058a876447c8a021f9eb1943f902534 gnu make won't allow conditionals to follow recipe prefix. For example there is a tab followed by ifeq on line 324 in the root Makefile. With the new make this conditional causes the following $ make cpu.o /home/dgoncharov/src/linux-kbuild/Makefile:2063: *** missing 'endif'. Stop. make: *** [Makefile:240: __sub-make] Error 2 This patch replaces tabs followed by conditionals with 8 spaces. See https://savannah.gnu.org/bugs/?64185 and https://savannah.gnu.org/bugs/?64259 for details. Signed-off-by: Dmitry Goncharov <dgoncharov@users.sf.net> Reported-by: Martin Dorey <martin.dorey@hitachivantara.com> Reviewed-by: Miguel Ojeda <ojeda@kernel.org> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> diff 2cc14f52 Sun Nov 26 20:59:33 MST 2023 Linus Torvalds <torvalds@linux-foundation.org> Linux 6.7-rc3 diff 72d09184 Wed Oct 18 09:19:48 MDT 2023 Masahiro Yamada <masahiroy@kernel.org> kbuild: avoid too many execution of scripts/pahole-flags.sh scripts/pahole-flags.sh is executed so many times. You can confirm it, as follows: $ cat <<EOF >> scripts/pahole-flags.sh > echo "scripts/pahole-flags.sh was executed" >&2 > EOF $ make -s scripts/pahole-flags.sh was executed scripts/pahole-flags.sh was executed scripts/pahole-flags.sh was executed scripts/pahole-flags.sh was executed scripts/pahole-flags.sh was executed [ lots of repeated lines... ] This scripts is executed more than 20 times during the kernel build because PAHOLE_FLAGS is a recursively expanded variable and exported to sub-processes. With GNU Make >= 4.4, it is executed more than 60 times because exported variables are also passed to other $(shell ) invocations. Without careful coding, it is known to cause an exponential fork explosion. [1] The use of $(shell ) in an exported recursive variable is likely wrong because $(shell ) is always evaluated due to the 'export' keyword, and the evaluation can occur multiple times by the nature of recursive variables. Convert the shell script to a Makefile, which is included only when CONFIG_DEBUG_INFO_BTF=y. [1]: https://savannah.gnu.org/bugs/index.php?64746 Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Reviewed-by: Alan Maguire <alan.maguire@oracle.com> Tested-by: Alan Maguire <alan.maguire@oracle.com> Reviewed-by: Nicolas Schier <n.schier@avm.de> Tested-by: Miguel Ojeda <ojeda@kernel.org> Acked-by: Miguel Ojeda <ojeda@kernel.org> Acked-by: Jiri Olsa <jolsa@kernel.org> Reviewed-by: Martin Rodriguez Reboredo <yakoyoku@gmail.com> |
Completed in 1397 milliseconds