Searched +hist:0 +hist:a5143f2 (Results 1 - 11 of 11) sorted by relevance
/linux-master/fs/afs/ | ||
H A D | vl_list.c | 0a5143f2 Fri Oct 19 17:57:57 MDT 2018 David Howells <dhowells@redhat.com> afs: Implement VL server rotation Track VL servers as independent entities rather than lumping all their addresses together into one set and implement server-level rotation by: (1) Add the concept of a VL server list, where each server has its own separate address list. This code is similar to the FS server list. (2) Use the DNS resolver to retrieve a set of servers and their associated addresses, ports, preference and weight ratings. (3) In the case of a legacy DNS resolver or an address list given directly through /proc/net/afs/cells, create a list containing just a dummy server record and attach all the addresses to that. (4) Implement a simple rotation policy, for the moment ignoring the priorities and weights assigned to the servers. (5) Show the address list through /proc/net/afs/<cell>/vlservers. This also displays the source and status of the data as indicated by the upcall. Signed-off-by: David Howells <dhowells@redhat.com> 0a5143f2 Fri Oct 19 17:57:57 MDT 2018 David Howells <dhowells@redhat.com> afs: Implement VL server rotation Track VL servers as independent entities rather than lumping all their addresses together into one set and implement server-level rotation by: (1) Add the concept of a VL server list, where each server has its own separate address list. This code is similar to the FS server list. (2) Use the DNS resolver to retrieve a set of servers and their associated addresses, ports, preference and weight ratings. (3) In the case of a legacy DNS resolver or an address list given directly through /proc/net/afs/cells, create a list containing just a dummy server record and attach all the addresses to that. (4) Implement a simple rotation policy, for the moment ignoring the priorities and weights assigned to the servers. (5) Show the address list through /proc/net/afs/<cell>/vlservers. This also displays the source and status of the data as indicated by the upcall. Signed-off-by: David Howells <dhowells@redhat.com> |
H A D | vl_rotate.c | diff 88c853c3 Tue Jul 23 04:24:59 MDT 2019 David Howells <dhowells@redhat.com> afs: Fix cell refcounting by splitting the usage counter Management of the lifetime of afs_cell struct has some problems due to the usage counter being used to determine whether objects of that type are in use in addition to whether anyone might be interested in the structure. This is made trickier by cell objects being cached for a period of time in case they're quickly reused as they hold the result of a setup process that may be slow (DNS lookups, AFS RPC ops). Problems include the cached root volume from alias resolution pinning its parent cell record, rmmod occasionally hanging and occasionally producing assertion failures. Fix this by splitting the count of active users from the struct reference count. Things then work as follows: (1) The cell cache keeps +1 on the cell's activity count and this has to be dropped before the cell can be removed. afs_manage_cell() tries to exchange the 1 to a 0 with the cells_lock write-locked, and if successful, the record is removed from the net->cells. (2) One struct ref is 'owned' by the activity count. That is put when the active count is reduced to 0 (final_destruction label). (3) A ref can be held on a cell whilst it is queued for management on a work queue without confusing the active count. afs_queue_cell() is added to wrap this. (4) The queue's ref is dropped at the end of the management. This is split out into a separate function, afs_manage_cell_work(). (5) The root volume record is put after a cell is removed (at the final_destruction label) rather then in the RCU destruction routine. (6) Volumes hold struct refs, but aren't active users. (7) Both counts are displayed in /proc/net/afs/cells. There are some management function changes: (*) afs_put_cell() now just decrements the refcount and triggers the RCU destruction if it becomes 0. It no longer sets a timer to have the manager do this. (*) afs_use_cell() and afs_unuse_cell() are added to increase and decrease the active count. afs_unuse_cell() sets the management timer. (*) afs_queue_cell() is added to queue a cell with approprate refs. There are also some other fixes: (*) Don't let /proc/net/afs/cells access a cell's vllist if it's NULL. (*) Make sure that candidate cells in lookups are properly destroyed rather than being simply kfree'd. This ensures the bits it points to are destroyed also. (*) afs_dec_cells_outstanding() is now called in cell destruction rather than at "final_destruction". This ensures that cell->net is still valid to the end of the destructor. (*) As a consequence of the previous two changes, move the increment of net->cells_outstanding that was at the point of insertion into the tree to the allocation routine to correctly balance things. Fixes: 989782dcdc91 ("afs: Overhaul cell database management") Signed-off-by: David Howells <dhowells@redhat.com> diff 88c853c3 Tue Jul 23 04:24:59 MDT 2019 David Howells <dhowells@redhat.com> afs: Fix cell refcounting by splitting the usage counter Management of the lifetime of afs_cell struct has some problems due to the usage counter being used to determine whether objects of that type are in use in addition to whether anyone might be interested in the structure. This is made trickier by cell objects being cached for a period of time in case they're quickly reused as they hold the result of a setup process that may be slow (DNS lookups, AFS RPC ops). Problems include the cached root volume from alias resolution pinning its parent cell record, rmmod occasionally hanging and occasionally producing assertion failures. Fix this by splitting the count of active users from the struct reference count. Things then work as follows: (1) The cell cache keeps +1 on the cell's activity count and this has to be dropped before the cell can be removed. afs_manage_cell() tries to exchange the 1 to a 0 with the cells_lock write-locked, and if successful, the record is removed from the net->cells. (2) One struct ref is 'owned' by the activity count. That is put when the active count is reduced to 0 (final_destruction label). (3) A ref can be held on a cell whilst it is queued for management on a work queue without confusing the active count. afs_queue_cell() is added to wrap this. (4) The queue's ref is dropped at the end of the management. This is split out into a separate function, afs_manage_cell_work(). (5) The root volume record is put after a cell is removed (at the final_destruction label) rather then in the RCU destruction routine. (6) Volumes hold struct refs, but aren't active users. (7) Both counts are displayed in /proc/net/afs/cells. There are some management function changes: (*) afs_put_cell() now just decrements the refcount and triggers the RCU destruction if it becomes 0. It no longer sets a timer to have the manager do this. (*) afs_use_cell() and afs_unuse_cell() are added to increase and decrease the active count. afs_unuse_cell() sets the management timer. (*) afs_queue_cell() is added to queue a cell with approprate refs. There are also some other fixes: (*) Don't let /proc/net/afs/cells access a cell's vllist if it's NULL. (*) Make sure that candidate cells in lookups are properly destroyed rather than being simply kfree'd. This ensures the bits it points to are destroyed also. (*) afs_dec_cells_outstanding() is now called in cell destruction rather than at "final_destruction". This ensures that cell->net is still valid to the end of the destructor. (*) As a consequence of the previous two changes, move the increment of net->cells_outstanding that was at the point of insertion into the tree to the allocation routine to correctly balance things. Fixes: 989782dcdc91 ("afs: Overhaul cell database management") Signed-off-by: David Howells <dhowells@redhat.com> diff 88c853c3 Tue Jul 23 04:24:59 MDT 2019 David Howells <dhowells@redhat.com> afs: Fix cell refcounting by splitting the usage counter Management of the lifetime of afs_cell struct has some problems due to the usage counter being used to determine whether objects of that type are in use in addition to whether anyone might be interested in the structure. This is made trickier by cell objects being cached for a period of time in case they're quickly reused as they hold the result of a setup process that may be slow (DNS lookups, AFS RPC ops). Problems include the cached root volume from alias resolution pinning its parent cell record, rmmod occasionally hanging and occasionally producing assertion failures. Fix this by splitting the count of active users from the struct reference count. Things then work as follows: (1) The cell cache keeps +1 on the cell's activity count and this has to be dropped before the cell can be removed. afs_manage_cell() tries to exchange the 1 to a 0 with the cells_lock write-locked, and if successful, the record is removed from the net->cells. (2) One struct ref is 'owned' by the activity count. That is put when the active count is reduced to 0 (final_destruction label). (3) A ref can be held on a cell whilst it is queued for management on a work queue without confusing the active count. afs_queue_cell() is added to wrap this. (4) The queue's ref is dropped at the end of the management. This is split out into a separate function, afs_manage_cell_work(). (5) The root volume record is put after a cell is removed (at the final_destruction label) rather then in the RCU destruction routine. (6) Volumes hold struct refs, but aren't active users. (7) Both counts are displayed in /proc/net/afs/cells. There are some management function changes: (*) afs_put_cell() now just decrements the refcount and triggers the RCU destruction if it becomes 0. It no longer sets a timer to have the manager do this. (*) afs_use_cell() and afs_unuse_cell() are added to increase and decrease the active count. afs_unuse_cell() sets the management timer. (*) afs_queue_cell() is added to queue a cell with approprate refs. There are also some other fixes: (*) Don't let /proc/net/afs/cells access a cell's vllist if it's NULL. (*) Make sure that candidate cells in lookups are properly destroyed rather than being simply kfree'd. This ensures the bits it points to are destroyed also. (*) afs_dec_cells_outstanding() is now called in cell destruction rather than at "final_destruction". This ensures that cell->net is still valid to the end of the destructor. (*) As a consequence of the previous two changes, move the increment of net->cells_outstanding that was at the point of insertion into the tree to the allocation routine to correctly balance things. Fixes: 989782dcdc91 ("afs: Overhaul cell database management") Signed-off-by: David Howells <dhowells@redhat.com> diff d5c32c89 Tue May 07 08:06:36 MDT 2019 David Howells <dhowells@redhat.com> afs: Fix cell DNS lookup Currently, once configured, AFS cells are looked up in the DNS at regular intervals - which is a waste of resources if those cells aren't being used. It also leads to a problem where cells preloaded, but not configured, before the network is brought up end up effectively statically configured with no VL servers and are unable to get any. Fix this by not doing the DNS lookup until the first time a cell is touched. It is waited for if we don't have any cached records yet, otherwise the DNS lookup to maintain the record is done in the background. This has the downside that the first time you touch a cell, you now have to wait for the upcall to do the required DNS lookups rather than them already being cached. Further, the record is not replaced if the old record has at least one server in it and the new record doesn't have any. Fixes: 0a5143f2f89c ("afs: Implement VL server rotation") Signed-off-by: David Howells <dhowells@redhat.com> diff 4584ae96 Tue Nov 13 16:20:28 MST 2018 David Howells <dhowells@redhat.com> afs: Fix missing net error handling kAFS can be given certain network errors (EADDRNOTAVAIL, EHOSTDOWN and ERFKILL) that it doesn't handle in its server/address rotation algorithms. They cause the probing and rotation to abort immediately rather than rotating. Fix this by: (1) Abstracting out the error prioritisation from the VL and FS rotation algorithms into a common function and expand usage into the server probing code. When multiple errors are available, this code selects the one we'd prefer to return. (2) Add handling for EADDRNOTAVAIL, EHOSTDOWN and ERFKILL. Fixes: 0fafdc9f888b ("afs: Fix file locking") Fixes: 0338747d8454 ("afs: Probe multiple fileservers simultaneously") Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> 0a5143f2 Fri Oct 19 17:57:57 MDT 2018 David Howells <dhowells@redhat.com> afs: Implement VL server rotation Track VL servers as independent entities rather than lumping all their addresses together into one set and implement server-level rotation by: (1) Add the concept of a VL server list, where each server has its own separate address list. This code is similar to the FS server list. (2) Use the DNS resolver to retrieve a set of servers and their associated addresses, ports, preference and weight ratings. (3) In the case of a legacy DNS resolver or an address list given directly through /proc/net/afs/cells, create a list containing just a dummy server record and attach all the addresses to that. (4) Implement a simple rotation policy, for the moment ignoring the priorities and weights assigned to the servers. (5) Show the address list through /proc/net/afs/<cell>/vlservers. This also displays the source and status of the data as indicated by the upcall. Signed-off-by: David Howells <dhowells@redhat.com> 0a5143f2 Fri Oct 19 17:57:57 MDT 2018 David Howells <dhowells@redhat.com> afs: Implement VL server rotation Track VL servers as independent entities rather than lumping all their addresses together into one set and implement server-level rotation by: (1) Add the concept of a VL server list, where each server has its own separate address list. This code is similar to the FS server list. (2) Use the DNS resolver to retrieve a set of servers and their associated addresses, ports, preference and weight ratings. (3) In the case of a legacy DNS resolver or an address list given directly through /proc/net/afs/cells, create a list containing just a dummy server record and attach all the addresses to that. (4) Implement a simple rotation policy, for the moment ignoring the priorities and weights assigned to the servers. (5) Show the address list through /proc/net/afs/<cell>/vlservers. This also displays the source and status of the data as indicated by the upcall. Signed-off-by: David Howells <dhowells@redhat.com> |
H A D | addr_list.c | diff d0660f0b Fri May 03 11:26:55 MDT 2019 David Howells <dhowells@redhat.com> dns_resolver: Allow used keys to be invalidated Allow used DNS resolver keys to be invalidated after use if the caller is doing its own caching of the results. This reduces the amount of resources required. Fix AFS to invalidate DNS results to kill off permanent failure records that get lodged in the resolver keyring and prevent future lookups from happening. Fixes: 0a5143f2f89c ("afs: Implement VL server rotation") Signed-off-by: David Howells <dhowells@redhat.com> diff 0a5143f2 Fri Oct 19 17:57:57 MDT 2018 David Howells <dhowells@redhat.com> afs: Implement VL server rotation Track VL servers as independent entities rather than lumping all their addresses together into one set and implement server-level rotation by: (1) Add the concept of a VL server list, where each server has its own separate address list. This code is similar to the FS server list. (2) Use the DNS resolver to retrieve a set of servers and their associated addresses, ports, preference and weight ratings. (3) In the case of a legacy DNS resolver or an address list given directly through /proc/net/afs/cells, create a list containing just a dummy server record and attach all the addresses to that. (4) Implement a simple rotation policy, for the moment ignoring the priorities and weights assigned to the servers. (5) Show the address list through /proc/net/afs/<cell>/vlservers. This also displays the source and status of the data as indicated by the upcall. Signed-off-by: David Howells <dhowells@redhat.com> diff 0a5143f2 Fri Oct 19 17:57:57 MDT 2018 David Howells <dhowells@redhat.com> afs: Implement VL server rotation Track VL servers as independent entities rather than lumping all their addresses together into one set and implement server-level rotation by: (1) Add the concept of a VL server list, where each server has its own separate address list. This code is similar to the FS server list. (2) Use the DNS resolver to retrieve a set of servers and their associated addresses, ports, preference and weight ratings. (3) In the case of a legacy DNS resolver or an address list given directly through /proc/net/afs/cells, create a list containing just a dummy server record and attach all the addresses to that. (4) Implement a simple rotation policy, for the moment ignoring the priorities and weights assigned to the servers. (5) Show the address list through /proc/net/afs/<cell>/vlservers. This also displays the source and status of the data as indicated by the upcall. Signed-off-by: David Howells <dhowells@redhat.com> diff acafe7e3 Tue May 08 14:45:50 MDT 2018 Kees Cook <keescook@chromium.org> treewide: Use struct_size() for kmalloc()-family One of the more common cases of allocation size calculations is finding the size of a structure that has a zero-sized array at the end, along with memory for some number of elements for that array. For example: struct foo { int stuff; void *entry[]; }; instance = kmalloc(sizeof(struct foo) + sizeof(void *) * count, GFP_KERNEL); Instead of leaving these open-coded and prone to type mistakes, we can now use the new struct_size() helper: instance = kmalloc(struct_size(instance, entry, count), GFP_KERNEL); This patch makes the changes for kmalloc()-family (and kvmalloc()-family) uses. It was done via automatic conversion with manual review for the "CHECKME" non-standard cases noted below, using the following Coccinelle script: // pkey_cache = kmalloc(sizeof *pkey_cache + tprops->pkey_tbl_len * // sizeof *pkey_cache->table, GFP_KERNEL); @@ identifier alloc =~ "kmalloc|kzalloc|kvmalloc|kvzalloc"; expression GFP; identifier VAR, ELEMENT; expression COUNT; @@ - alloc(sizeof(*VAR) + COUNT * sizeof(*VAR->ELEMENT), GFP) + alloc(struct_size(VAR, ELEMENT, COUNT), GFP) // mr = kzalloc(sizeof(*mr) + m * sizeof(mr->map[0]), GFP_KERNEL); @@ identifier alloc =~ "kmalloc|kzalloc|kvmalloc|kvzalloc"; expression GFP; identifier VAR, ELEMENT; expression COUNT; @@ - alloc(sizeof(*VAR) + COUNT * sizeof(VAR->ELEMENT[0]), GFP) + alloc(struct_size(VAR, ELEMENT, COUNT), GFP) // Same pattern, but can't trivially locate the trailing element name, // or variable name. @@ identifier alloc =~ "kmalloc|kzalloc|kvmalloc|kvzalloc"; expression GFP; expression SOMETHING, COUNT, ELEMENT; @@ - alloc(sizeof(SOMETHING) + COUNT * sizeof(ELEMENT), GFP) + alloc(CHECKME_struct_size(&SOMETHING, ELEMENT, COUNT), GFP) Signed-off-by: Kees Cook <keescook@chromium.org> diff acafe7e3 Tue May 08 14:45:50 MDT 2018 Kees Cook <keescook@chromium.org> treewide: Use struct_size() for kmalloc()-family One of the more common cases of allocation size calculations is finding the size of a structure that has a zero-sized array at the end, along with memory for some number of elements for that array. For example: struct foo { int stuff; void *entry[]; }; instance = kmalloc(sizeof(struct foo) + sizeof(void *) * count, GFP_KERNEL); Instead of leaving these open-coded and prone to type mistakes, we can now use the new struct_size() helper: instance = kmalloc(struct_size(instance, entry, count), GFP_KERNEL); This patch makes the changes for kmalloc()-family (and kvmalloc()-family) uses. It was done via automatic conversion with manual review for the "CHECKME" non-standard cases noted below, using the following Coccinelle script: // pkey_cache = kmalloc(sizeof *pkey_cache + tprops->pkey_tbl_len * // sizeof *pkey_cache->table, GFP_KERNEL); @@ identifier alloc =~ "kmalloc|kzalloc|kvmalloc|kvzalloc"; expression GFP; identifier VAR, ELEMENT; expression COUNT; @@ - alloc(sizeof(*VAR) + COUNT * sizeof(*VAR->ELEMENT), GFP) + alloc(struct_size(VAR, ELEMENT, COUNT), GFP) // mr = kzalloc(sizeof(*mr) + m * sizeof(mr->map[0]), GFP_KERNEL); @@ identifier alloc =~ "kmalloc|kzalloc|kvmalloc|kvzalloc"; expression GFP; identifier VAR, ELEMENT; expression COUNT; @@ - alloc(sizeof(*VAR) + COUNT * sizeof(VAR->ELEMENT[0]), GFP) + alloc(struct_size(VAR, ELEMENT, COUNT), GFP) // Same pattern, but can't trivially locate the trailing element name, // or variable name. @@ identifier alloc =~ "kmalloc|kzalloc|kvmalloc|kvzalloc"; expression GFP; expression SOMETHING, COUNT, ELEMENT; @@ - alloc(sizeof(SOMETHING) + COUNT * sizeof(ELEMENT), GFP) + alloc(CHECKME_struct_size(&SOMETHING, ELEMENT, COUNT), GFP) Signed-off-by: Kees Cook <keescook@chromium.org> diff fe4d774c Mon Feb 05 23:26:30 MST 2018 David Howells <dhowells@redhat.com> afs: Fix missing cursor clearance afs_select_fileserver() ends the address cursor it is using in the case in which we get some sort of network error and run out of addresses to iterate through, before it jumps to try the next server. This also needs to be done when the server aborts with some sort of error that means we should try the next server. Fix this by: (1) Move the iterate_address afs_end_cursor() call to the next_server case. (2) End the cursor in the failed case. (3) Make afs_end_cursor() clear the ->begun flag and ->addr pointer in the address cursor. (4) Make afs_end_cursor() able to be called on an already cleared cursor. Without this, something like the following oops may occur: AFS: Assertion failed 18446612134397189888 == 0 is false 0xffff88007c279f00 == 0x0 is false ------------[ cut here ]------------ kernel BUG at fs/afs/rotate.c:360! RIP: 0010:afs_select_fileserver+0x79b/0xa30 [kafs] Call Trace: afs_statfs+0xcc/0x180 [kafs] ? p9_client_statfs+0x9e/0x110 [9pnet] ? _cond_resched+0x19/0x40 statfs_by_dentry+0x6d/0x90 vfs_statfs+0x1b/0xc0 user_statfs+0x4b/0x80 SYSC_statfs+0x15/0x30 SyS_statfs+0xe/0x10 entry_SYSCALL_64_fastpath+0x20/0x83 Fixes: d2ddc776a458 ("afs: Overhaul volume and server record caching and fileserver rotation") Reported-by: Marc Dionne <marc.dionne@auristor.com> Signed-off-by: David Howells <dhowells@redhat.com> cc: stable@vger.kernel.org diff fe4d774c Mon Feb 05 23:26:30 MST 2018 David Howells <dhowells@redhat.com> afs: Fix missing cursor clearance afs_select_fileserver() ends the address cursor it is using in the case in which we get some sort of network error and run out of addresses to iterate through, before it jumps to try the next server. This also needs to be done when the server aborts with some sort of error that means we should try the next server. Fix this by: (1) Move the iterate_address afs_end_cursor() call to the next_server case. (2) End the cursor in the failed case. (3) Make afs_end_cursor() clear the ->begun flag and ->addr pointer in the address cursor. (4) Make afs_end_cursor() able to be called on an already cleared cursor. Without this, something like the following oops may occur: AFS: Assertion failed 18446612134397189888 == 0 is false 0xffff88007c279f00 == 0x0 is false ------------[ cut here ]------------ kernel BUG at fs/afs/rotate.c:360! RIP: 0010:afs_select_fileserver+0x79b/0xa30 [kafs] Call Trace: afs_statfs+0xcc/0x180 [kafs] ? p9_client_statfs+0x9e/0x110 [9pnet] ? _cond_resched+0x19/0x40 statfs_by_dentry+0x6d/0x90 vfs_statfs+0x1b/0xc0 user_statfs+0x4b/0x80 SYSC_statfs+0x15/0x30 SyS_statfs+0xe/0x10 entry_SYSCALL_64_fastpath+0x20/0x83 Fixes: d2ddc776a458 ("afs: Overhaul volume and server record caching and fileserver rotation") Reported-by: Marc Dionne <marc.dionne@auristor.com> Signed-off-by: David Howells <dhowells@redhat.com> cc: stable@vger.kernel.org diff fe4d774c Mon Feb 05 23:26:30 MST 2018 David Howells <dhowells@redhat.com> afs: Fix missing cursor clearance afs_select_fileserver() ends the address cursor it is using in the case in which we get some sort of network error and run out of addresses to iterate through, before it jumps to try the next server. This also needs to be done when the server aborts with some sort of error that means we should try the next server. Fix this by: (1) Move the iterate_address afs_end_cursor() call to the next_server case. (2) End the cursor in the failed case. (3) Make afs_end_cursor() clear the ->begun flag and ->addr pointer in the address cursor. (4) Make afs_end_cursor() able to be called on an already cleared cursor. Without this, something like the following oops may occur: AFS: Assertion failed 18446612134397189888 == 0 is false 0xffff88007c279f00 == 0x0 is false ------------[ cut here ]------------ kernel BUG at fs/afs/rotate.c:360! RIP: 0010:afs_select_fileserver+0x79b/0xa30 [kafs] Call Trace: afs_statfs+0xcc/0x180 [kafs] ? p9_client_statfs+0x9e/0x110 [9pnet] ? _cond_resched+0x19/0x40 statfs_by_dentry+0x6d/0x90 vfs_statfs+0x1b/0xc0 user_statfs+0x4b/0x80 SYSC_statfs+0x15/0x30 SyS_statfs+0xe/0x10 entry_SYSCALL_64_fastpath+0x20/0x83 Fixes: d2ddc776a458 ("afs: Overhaul volume and server record caching and fileserver rotation") Reported-by: Marc Dionne <marc.dionne@auristor.com> Signed-off-by: David Howells <dhowells@redhat.com> cc: stable@vger.kernel.org diff fe4d774c Mon Feb 05 23:26:30 MST 2018 David Howells <dhowells@redhat.com> afs: Fix missing cursor clearance afs_select_fileserver() ends the address cursor it is using in the case in which we get some sort of network error and run out of addresses to iterate through, before it jumps to try the next server. This also needs to be done when the server aborts with some sort of error that means we should try the next server. Fix this by: (1) Move the iterate_address afs_end_cursor() call to the next_server case. (2) End the cursor in the failed case. (3) Make afs_end_cursor() clear the ->begun flag and ->addr pointer in the address cursor. (4) Make afs_end_cursor() able to be called on an already cleared cursor. Without this, something like the following oops may occur: AFS: Assertion failed 18446612134397189888 == 0 is false 0xffff88007c279f00 == 0x0 is false ------------[ cut here ]------------ kernel BUG at fs/afs/rotate.c:360! RIP: 0010:afs_select_fileserver+0x79b/0xa30 [kafs] Call Trace: afs_statfs+0xcc/0x180 [kafs] ? p9_client_statfs+0x9e/0x110 [9pnet] ? _cond_resched+0x19/0x40 statfs_by_dentry+0x6d/0x90 vfs_statfs+0x1b/0xc0 user_statfs+0x4b/0x80 SYSC_statfs+0x15/0x30 SyS_statfs+0xe/0x10 entry_SYSCALL_64_fastpath+0x20/0x83 Fixes: d2ddc776a458 ("afs: Overhaul volume and server record caching and fileserver rotation") Reported-by: Marc Dionne <marc.dionne@auristor.com> Signed-off-by: David Howells <dhowells@redhat.com> cc: stable@vger.kernel.org diff fe4d774c Mon Feb 05 23:26:30 MST 2018 David Howells <dhowells@redhat.com> afs: Fix missing cursor clearance afs_select_fileserver() ends the address cursor it is using in the case in which we get some sort of network error and run out of addresses to iterate through, before it jumps to try the next server. This also needs to be done when the server aborts with some sort of error that means we should try the next server. Fix this by: (1) Move the iterate_address afs_end_cursor() call to the next_server case. (2) End the cursor in the failed case. (3) Make afs_end_cursor() clear the ->begun flag and ->addr pointer in the address cursor. (4) Make afs_end_cursor() able to be called on an already cleared cursor. Without this, something like the following oops may occur: AFS: Assertion failed 18446612134397189888 == 0 is false 0xffff88007c279f00 == 0x0 is false ------------[ cut here ]------------ kernel BUG at fs/afs/rotate.c:360! RIP: 0010:afs_select_fileserver+0x79b/0xa30 [kafs] Call Trace: afs_statfs+0xcc/0x180 [kafs] ? p9_client_statfs+0x9e/0x110 [9pnet] ? _cond_resched+0x19/0x40 statfs_by_dentry+0x6d/0x90 vfs_statfs+0x1b/0xc0 user_statfs+0x4b/0x80 SYSC_statfs+0x15/0x30 SyS_statfs+0xe/0x10 entry_SYSCALL_64_fastpath+0x20/0x83 Fixes: d2ddc776a458 ("afs: Overhaul volume and server record caching and fileserver rotation") Reported-by: Marc Dionne <marc.dionne@auristor.com> Signed-off-by: David Howells <dhowells@redhat.com> cc: stable@vger.kernel.org diff fe4d774c Mon Feb 05 23:26:30 MST 2018 David Howells <dhowells@redhat.com> afs: Fix missing cursor clearance afs_select_fileserver() ends the address cursor it is using in the case in which we get some sort of network error and run out of addresses to iterate through, before it jumps to try the next server. This also needs to be done when the server aborts with some sort of error that means we should try the next server. Fix this by: (1) Move the iterate_address afs_end_cursor() call to the next_server case. (2) End the cursor in the failed case. (3) Make afs_end_cursor() clear the ->begun flag and ->addr pointer in the address cursor. (4) Make afs_end_cursor() able to be called on an already cleared cursor. Without this, something like the following oops may occur: AFS: Assertion failed 18446612134397189888 == 0 is false 0xffff88007c279f00 == 0x0 is false ------------[ cut here ]------------ kernel BUG at fs/afs/rotate.c:360! RIP: 0010:afs_select_fileserver+0x79b/0xa30 [kafs] Call Trace: afs_statfs+0xcc/0x180 [kafs] ? p9_client_statfs+0x9e/0x110 [9pnet] ? _cond_resched+0x19/0x40 statfs_by_dentry+0x6d/0x90 vfs_statfs+0x1b/0xc0 user_statfs+0x4b/0x80 SYSC_statfs+0x15/0x30 SyS_statfs+0xe/0x10 entry_SYSCALL_64_fastpath+0x20/0x83 Fixes: d2ddc776a458 ("afs: Overhaul volume and server record caching and fileserver rotation") Reported-by: Marc Dionne <marc.dionne@auristor.com> Signed-off-by: David Howells <dhowells@redhat.com> cc: stable@vger.kernel.org diff fe4d774c Mon Feb 05 23:26:30 MST 2018 David Howells <dhowells@redhat.com> afs: Fix missing cursor clearance afs_select_fileserver() ends the address cursor it is using in the case in which we get some sort of network error and run out of addresses to iterate through, before it jumps to try the next server. This also needs to be done when the server aborts with some sort of error that means we should try the next server. Fix this by: (1) Move the iterate_address afs_end_cursor() call to the next_server case. (2) End the cursor in the failed case. (3) Make afs_end_cursor() clear the ->begun flag and ->addr pointer in the address cursor. (4) Make afs_end_cursor() able to be called on an already cleared cursor. Without this, something like the following oops may occur: AFS: Assertion failed 18446612134397189888 == 0 is false 0xffff88007c279f00 == 0x0 is false ------------[ cut here ]------------ kernel BUG at fs/afs/rotate.c:360! RIP: 0010:afs_select_fileserver+0x79b/0xa30 [kafs] Call Trace: afs_statfs+0xcc/0x180 [kafs] ? p9_client_statfs+0x9e/0x110 [9pnet] ? _cond_resched+0x19/0x40 statfs_by_dentry+0x6d/0x90 vfs_statfs+0x1b/0xc0 user_statfs+0x4b/0x80 SYSC_statfs+0x15/0x30 SyS_statfs+0xe/0x10 entry_SYSCALL_64_fastpath+0x20/0x83 Fixes: d2ddc776a458 ("afs: Overhaul volume and server record caching and fileserver rotation") Reported-by: Marc Dionne <marc.dionne@auristor.com> Signed-off-by: David Howells <dhowells@redhat.com> cc: stable@vger.kernel.org diff fe4d774c Mon Feb 05 23:26:30 MST 2018 David Howells <dhowells@redhat.com> afs: Fix missing cursor clearance afs_select_fileserver() ends the address cursor it is using in the case in which we get some sort of network error and run out of addresses to iterate through, before it jumps to try the next server. This also needs to be done when the server aborts with some sort of error that means we should try the next server. Fix this by: (1) Move the iterate_address afs_end_cursor() call to the next_server case. (2) End the cursor in the failed case. (3) Make afs_end_cursor() clear the ->begun flag and ->addr pointer in the address cursor. (4) Make afs_end_cursor() able to be called on an already cleared cursor. Without this, something like the following oops may occur: AFS: Assertion failed 18446612134397189888 == 0 is false 0xffff88007c279f00 == 0x0 is false ------------[ cut here ]------------ kernel BUG at fs/afs/rotate.c:360! RIP: 0010:afs_select_fileserver+0x79b/0xa30 [kafs] Call Trace: afs_statfs+0xcc/0x180 [kafs] ? p9_client_statfs+0x9e/0x110 [9pnet] ? _cond_resched+0x19/0x40 statfs_by_dentry+0x6d/0x90 vfs_statfs+0x1b/0xc0 user_statfs+0x4b/0x80 SYSC_statfs+0x15/0x30 SyS_statfs+0xe/0x10 entry_SYSCALL_64_fastpath+0x20/0x83 Fixes: d2ddc776a458 ("afs: Overhaul volume and server record caching and fileserver rotation") Reported-by: Marc Dionne <marc.dionne@auristor.com> Signed-off-by: David Howells <dhowells@redhat.com> cc: stable@vger.kernel.org diff fe4d774c Mon Feb 05 23:26:30 MST 2018 David Howells <dhowells@redhat.com> afs: Fix missing cursor clearance afs_select_fileserver() ends the address cursor it is using in the case in which we get some sort of network error and run out of addresses to iterate through, before it jumps to try the next server. This also needs to be done when the server aborts with some sort of error that means we should try the next server. Fix this by: (1) Move the iterate_address afs_end_cursor() call to the next_server case. (2) End the cursor in the failed case. (3) Make afs_end_cursor() clear the ->begun flag and ->addr pointer in the address cursor. (4) Make afs_end_cursor() able to be called on an already cleared cursor. Without this, something like the following oops may occur: AFS: Assertion failed 18446612134397189888 == 0 is false 0xffff88007c279f00 == 0x0 is false ------------[ cut here ]------------ kernel BUG at fs/afs/rotate.c:360! RIP: 0010:afs_select_fileserver+0x79b/0xa30 [kafs] Call Trace: afs_statfs+0xcc/0x180 [kafs] ? p9_client_statfs+0x9e/0x110 [9pnet] ? _cond_resched+0x19/0x40 statfs_by_dentry+0x6d/0x90 vfs_statfs+0x1b/0xc0 user_statfs+0x4b/0x80 SYSC_statfs+0x15/0x30 SyS_statfs+0xe/0x10 entry_SYSCALL_64_fastpath+0x20/0x83 Fixes: d2ddc776a458 ("afs: Overhaul volume and server record caching and fileserver rotation") Reported-by: Marc Dionne <marc.dionne@auristor.com> Signed-off-by: David Howells <dhowells@redhat.com> cc: stable@vger.kernel.org diff fe4d774c Mon Feb 05 23:26:30 MST 2018 David Howells <dhowells@redhat.com> afs: Fix missing cursor clearance afs_select_fileserver() ends the address cursor it is using in the case in which we get some sort of network error and run out of addresses to iterate through, before it jumps to try the next server. This also needs to be done when the server aborts with some sort of error that means we should try the next server. Fix this by: (1) Move the iterate_address afs_end_cursor() call to the next_server case. (2) End the cursor in the failed case. (3) Make afs_end_cursor() clear the ->begun flag and ->addr pointer in the address cursor. (4) Make afs_end_cursor() able to be called on an already cleared cursor. Without this, something like the following oops may occur: AFS: Assertion failed 18446612134397189888 == 0 is false 0xffff88007c279f00 == 0x0 is false ------------[ cut here ]------------ kernel BUG at fs/afs/rotate.c:360! RIP: 0010:afs_select_fileserver+0x79b/0xa30 [kafs] Call Trace: afs_statfs+0xcc/0x180 [kafs] ? p9_client_statfs+0x9e/0x110 [9pnet] ? _cond_resched+0x19/0x40 statfs_by_dentry+0x6d/0x90 vfs_statfs+0x1b/0xc0 user_statfs+0x4b/0x80 SYSC_statfs+0x15/0x30 SyS_statfs+0xe/0x10 entry_SYSCALL_64_fastpath+0x20/0x83 Fixes: d2ddc776a458 ("afs: Overhaul volume and server record caching and fileserver rotation") Reported-by: Marc Dionne <marc.dionne@auristor.com> Signed-off-by: David Howells <dhowells@redhat.com> cc: stable@vger.kernel.org diff fe4d774c Mon Feb 05 23:26:30 MST 2018 David Howells <dhowells@redhat.com> afs: Fix missing cursor clearance afs_select_fileserver() ends the address cursor it is using in the case in which we get some sort of network error and run out of addresses to iterate through, before it jumps to try the next server. This also needs to be done when the server aborts with some sort of error that means we should try the next server. Fix this by: (1) Move the iterate_address afs_end_cursor() call to the next_server case. (2) End the cursor in the failed case. (3) Make afs_end_cursor() clear the ->begun flag and ->addr pointer in the address cursor. (4) Make afs_end_cursor() able to be called on an already cleared cursor. Without this, something like the following oops may occur: AFS: Assertion failed 18446612134397189888 == 0 is false 0xffff88007c279f00 == 0x0 is false ------------[ cut here ]------------ kernel BUG at fs/afs/rotate.c:360! RIP: 0010:afs_select_fileserver+0x79b/0xa30 [kafs] Call Trace: afs_statfs+0xcc/0x180 [kafs] ? p9_client_statfs+0x9e/0x110 [9pnet] ? _cond_resched+0x19/0x40 statfs_by_dentry+0x6d/0x90 vfs_statfs+0x1b/0xc0 user_statfs+0x4b/0x80 SYSC_statfs+0x15/0x30 SyS_statfs+0xe/0x10 entry_SYSCALL_64_fastpath+0x20/0x83 Fixes: d2ddc776a458 ("afs: Overhaul volume and server record caching and fileserver rotation") Reported-by: Marc Dionne <marc.dionne@auristor.com> Signed-off-by: David Howells <dhowells@redhat.com> cc: stable@vger.kernel.org diff fe4d774c Mon Feb 05 23:26:30 MST 2018 David Howells <dhowells@redhat.com> afs: Fix missing cursor clearance afs_select_fileserver() ends the address cursor it is using in the case in which we get some sort of network error and run out of addresses to iterate through, before it jumps to try the next server. This also needs to be done when the server aborts with some sort of error that means we should try the next server. Fix this by: (1) Move the iterate_address afs_end_cursor() call to the next_server case. (2) End the cursor in the failed case. (3) Make afs_end_cursor() clear the ->begun flag and ->addr pointer in the address cursor. (4) Make afs_end_cursor() able to be called on an already cleared cursor. Without this, something like the following oops may occur: AFS: Assertion failed 18446612134397189888 == 0 is false 0xffff88007c279f00 == 0x0 is false ------------[ cut here ]------------ kernel BUG at fs/afs/rotate.c:360! RIP: 0010:afs_select_fileserver+0x79b/0xa30 [kafs] Call Trace: afs_statfs+0xcc/0x180 [kafs] ? p9_client_statfs+0x9e/0x110 [9pnet] ? _cond_resched+0x19/0x40 statfs_by_dentry+0x6d/0x90 vfs_statfs+0x1b/0xc0 user_statfs+0x4b/0x80 SYSC_statfs+0x15/0x30 SyS_statfs+0xe/0x10 entry_SYSCALL_64_fastpath+0x20/0x83 Fixes: d2ddc776a458 ("afs: Overhaul volume and server record caching and fileserver rotation") Reported-by: Marc Dionne <marc.dionne@auristor.com> Signed-off-by: David Howells <dhowells@redhat.com> cc: stable@vger.kernel.org diff fe4d774c Mon Feb 05 23:26:30 MST 2018 David Howells <dhowells@redhat.com> afs: Fix missing cursor clearance afs_select_fileserver() ends the address cursor it is using in the case in which we get some sort of network error and run out of addresses to iterate through, before it jumps to try the next server. This also needs to be done when the server aborts with some sort of error that means we should try the next server. Fix this by: (1) Move the iterate_address afs_end_cursor() call to the next_server case. (2) End the cursor in the failed case. (3) Make afs_end_cursor() clear the ->begun flag and ->addr pointer in the address cursor. (4) Make afs_end_cursor() able to be called on an already cleared cursor. Without this, something like the following oops may occur: AFS: Assertion failed 18446612134397189888 == 0 is false 0xffff88007c279f00 == 0x0 is false ------------[ cut here ]------------ kernel BUG at fs/afs/rotate.c:360! RIP: 0010:afs_select_fileserver+0x79b/0xa30 [kafs] Call Trace: afs_statfs+0xcc/0x180 [kafs] ? p9_client_statfs+0x9e/0x110 [9pnet] ? _cond_resched+0x19/0x40 statfs_by_dentry+0x6d/0x90 vfs_statfs+0x1b/0xc0 user_statfs+0x4b/0x80 SYSC_statfs+0x15/0x30 SyS_statfs+0xe/0x10 entry_SYSCALL_64_fastpath+0x20/0x83 Fixes: d2ddc776a458 ("afs: Overhaul volume and server record caching and fileserver rotation") Reported-by: Marc Dionne <marc.dionne@auristor.com> Signed-off-by: David Howells <dhowells@redhat.com> cc: stable@vger.kernel.org diff fe4d774c Mon Feb 05 23:26:30 MST 2018 David Howells <dhowells@redhat.com> afs: Fix missing cursor clearance afs_select_fileserver() ends the address cursor it is using in the case in which we get some sort of network error and run out of addresses to iterate through, before it jumps to try the next server. This also needs to be done when the server aborts with some sort of error that means we should try the next server. Fix this by: (1) Move the iterate_address afs_end_cursor() call to the next_server case. (2) End the cursor in the failed case. (3) Make afs_end_cursor() clear the ->begun flag and ->addr pointer in the address cursor. (4) Make afs_end_cursor() able to be called on an already cleared cursor. Without this, something like the following oops may occur: AFS: Assertion failed 18446612134397189888 == 0 is false 0xffff88007c279f00 == 0x0 is false ------------[ cut here ]------------ kernel BUG at fs/afs/rotate.c:360! RIP: 0010:afs_select_fileserver+0x79b/0xa30 [kafs] Call Trace: afs_statfs+0xcc/0x180 [kafs] ? p9_client_statfs+0x9e/0x110 [9pnet] ? _cond_resched+0x19/0x40 statfs_by_dentry+0x6d/0x90 vfs_statfs+0x1b/0xc0 user_statfs+0x4b/0x80 SYSC_statfs+0x15/0x30 SyS_statfs+0xe/0x10 entry_SYSCALL_64_fastpath+0x20/0x83 Fixes: d2ddc776a458 ("afs: Overhaul volume and server record caching and fileserver rotation") Reported-by: Marc Dionne <marc.dionne@auristor.com> Signed-off-by: David Howells <dhowells@redhat.com> cc: stable@vger.kernel.org diff fe4d774c Mon Feb 05 23:26:30 MST 2018 David Howells <dhowells@redhat.com> afs: Fix missing cursor clearance afs_select_fileserver() ends the address cursor it is using in the case in which we get some sort of network error and run out of addresses to iterate through, before it jumps to try the next server. This also needs to be done when the server aborts with some sort of error that means we should try the next server. Fix this by: (1) Move the iterate_address afs_end_cursor() call to the next_server case. (2) End the cursor in the failed case. (3) Make afs_end_cursor() clear the ->begun flag and ->addr pointer in the address cursor. (4) Make afs_end_cursor() able to be called on an already cleared cursor. Without this, something like the following oops may occur: AFS: Assertion failed 18446612134397189888 == 0 is false 0xffff88007c279f00 == 0x0 is false ------------[ cut here ]------------ kernel BUG at fs/afs/rotate.c:360! RIP: 0010:afs_select_fileserver+0x79b/0xa30 [kafs] Call Trace: afs_statfs+0xcc/0x180 [kafs] ? p9_client_statfs+0x9e/0x110 [9pnet] ? _cond_resched+0x19/0x40 statfs_by_dentry+0x6d/0x90 vfs_statfs+0x1b/0xc0 user_statfs+0x4b/0x80 SYSC_statfs+0x15/0x30 SyS_statfs+0xe/0x10 entry_SYSCALL_64_fastpath+0x20/0x83 Fixes: d2ddc776a458 ("afs: Overhaul volume and server record caching and fileserver rotation") Reported-by: Marc Dionne <marc.dionne@auristor.com> Signed-off-by: David Howells <dhowells@redhat.com> cc: stable@vger.kernel.org diff fe4d774c Mon Feb 05 23:26:30 MST 2018 David Howells <dhowells@redhat.com> afs: Fix missing cursor clearance afs_select_fileserver() ends the address cursor it is using in the case in which we get some sort of network error and run out of addresses to iterate through, before it jumps to try the next server. This also needs to be done when the server aborts with some sort of error that means we should try the next server. Fix this by: (1) Move the iterate_address afs_end_cursor() call to the next_server case. (2) End the cursor in the failed case. (3) Make afs_end_cursor() clear the ->begun flag and ->addr pointer in the address cursor. (4) Make afs_end_cursor() able to be called on an already cleared cursor. Without this, something like the following oops may occur: AFS: Assertion failed 18446612134397189888 == 0 is false 0xffff88007c279f00 == 0x0 is false ------------[ cut here ]------------ kernel BUG at fs/afs/rotate.c:360! RIP: 0010:afs_select_fileserver+0x79b/0xa30 [kafs] Call Trace: afs_statfs+0xcc/0x180 [kafs] ? p9_client_statfs+0x9e/0x110 [9pnet] ? _cond_resched+0x19/0x40 statfs_by_dentry+0x6d/0x90 vfs_statfs+0x1b/0xc0 user_statfs+0x4b/0x80 SYSC_statfs+0x15/0x30 SyS_statfs+0xe/0x10 entry_SYSCALL_64_fastpath+0x20/0x83 Fixes: d2ddc776a458 ("afs: Overhaul volume and server record caching and fileserver rotation") Reported-by: Marc Dionne <marc.dionne@auristor.com> Signed-off-by: David Howells <dhowells@redhat.com> cc: stable@vger.kernel.org diff fe4d774c Mon Feb 05 23:26:30 MST 2018 David Howells <dhowells@redhat.com> afs: Fix missing cursor clearance afs_select_fileserver() ends the address cursor it is using in the case in which we get some sort of network error and run out of addresses to iterate through, before it jumps to try the next server. This also needs to be done when the server aborts with some sort of error that means we should try the next server. Fix this by: (1) Move the iterate_address afs_end_cursor() call to the next_server case. (2) End the cursor in the failed case. (3) Make afs_end_cursor() clear the ->begun flag and ->addr pointer in the address cursor. (4) Make afs_end_cursor() able to be called on an already cleared cursor. Without this, something like the following oops may occur: AFS: Assertion failed 18446612134397189888 == 0 is false 0xffff88007c279f00 == 0x0 is false ------------[ cut here ]------------ kernel BUG at fs/afs/rotate.c:360! RIP: 0010:afs_select_fileserver+0x79b/0xa30 [kafs] Call Trace: afs_statfs+0xcc/0x180 [kafs] ? p9_client_statfs+0x9e/0x110 [9pnet] ? _cond_resched+0x19/0x40 statfs_by_dentry+0x6d/0x90 vfs_statfs+0x1b/0xc0 user_statfs+0x4b/0x80 SYSC_statfs+0x15/0x30 SyS_statfs+0xe/0x10 entry_SYSCALL_64_fastpath+0x20/0x83 Fixes: d2ddc776a458 ("afs: Overhaul volume and server record caching and fileserver rotation") Reported-by: Marc Dionne <marc.dionne@auristor.com> Signed-off-by: David Howells <dhowells@redhat.com> cc: stable@vger.kernel.org diff fe4d774c Mon Feb 05 23:26:30 MST 2018 David Howells <dhowells@redhat.com> afs: Fix missing cursor clearance afs_select_fileserver() ends the address cursor it is using in the case in which we get some sort of network error and run out of addresses to iterate through, before it jumps to try the next server. This also needs to be done when the server aborts with some sort of error that means we should try the next server. Fix this by: (1) Move the iterate_address afs_end_cursor() call to the next_server case. (2) End the cursor in the failed case. (3) Make afs_end_cursor() clear the ->begun flag and ->addr pointer in the address cursor. (4) Make afs_end_cursor() able to be called on an already cleared cursor. Without this, something like the following oops may occur: AFS: Assertion failed 18446612134397189888 == 0 is false 0xffff88007c279f00 == 0x0 is false ------------[ cut here ]------------ kernel BUG at fs/afs/rotate.c:360! RIP: 0010:afs_select_fileserver+0x79b/0xa30 [kafs] Call Trace: afs_statfs+0xcc/0x180 [kafs] ? p9_client_statfs+0x9e/0x110 [9pnet] ? _cond_resched+0x19/0x40 statfs_by_dentry+0x6d/0x90 vfs_statfs+0x1b/0xc0 user_statfs+0x4b/0x80 SYSC_statfs+0x15/0x30 SyS_statfs+0xe/0x10 entry_SYSCALL_64_fastpath+0x20/0x83 Fixes: d2ddc776a458 ("afs: Overhaul volume and server record caching and fileserver rotation") Reported-by: Marc Dionne <marc.dionne@auristor.com> Signed-off-by: David Howells <dhowells@redhat.com> cc: stable@vger.kernel.org diff fe4d774c Mon Feb 05 23:26:30 MST 2018 David Howells <dhowells@redhat.com> afs: Fix missing cursor clearance afs_select_fileserver() ends the address cursor it is using in the case in which we get some sort of network error and run out of addresses to iterate through, before it jumps to try the next server. This also needs to be done when the server aborts with some sort of error that means we should try the next server. Fix this by: (1) Move the iterate_address afs_end_cursor() call to the next_server case. (2) End the cursor in the failed case. (3) Make afs_end_cursor() clear the ->begun flag and ->addr pointer in the address cursor. (4) Make afs_end_cursor() able to be called on an already cleared cursor. Without this, something like the following oops may occur: AFS: Assertion failed 18446612134397189888 == 0 is false 0xffff88007c279f00 == 0x0 is false ------------[ cut here ]------------ kernel BUG at fs/afs/rotate.c:360! RIP: 0010:afs_select_fileserver+0x79b/0xa30 [kafs] Call Trace: afs_statfs+0xcc/0x180 [kafs] ? p9_client_statfs+0x9e/0x110 [9pnet] ? _cond_resched+0x19/0x40 statfs_by_dentry+0x6d/0x90 vfs_statfs+0x1b/0xc0 user_statfs+0x4b/0x80 SYSC_statfs+0x15/0x30 SyS_statfs+0xe/0x10 entry_SYSCALL_64_fastpath+0x20/0x83 Fixes: d2ddc776a458 ("afs: Overhaul volume and server record caching and fileserver rotation") Reported-by: Marc Dionne <marc.dionne@auristor.com> Signed-off-by: David Howells <dhowells@redhat.com> cc: stable@vger.kernel.org diff fe4d774c Mon Feb 05 23:26:30 MST 2018 David Howells <dhowells@redhat.com> afs: Fix missing cursor clearance afs_select_fileserver() ends the address cursor it is using in the case in which we get some sort of network error and run out of addresses to iterate through, before it jumps to try the next server. This also needs to be done when the server aborts with some sort of error that means we should try the next server. Fix this by: (1) Move the iterate_address afs_end_cursor() call to the next_server case. (2) End the cursor in the failed case. (3) Make afs_end_cursor() clear the ->begun flag and ->addr pointer in the address cursor. (4) Make afs_end_cursor() able to be called on an already cleared cursor. Without this, something like the following oops may occur: AFS: Assertion failed 18446612134397189888 == 0 is false 0xffff88007c279f00 == 0x0 is false ------------[ cut here ]------------ kernel BUG at fs/afs/rotate.c:360! RIP: 0010:afs_select_fileserver+0x79b/0xa30 [kafs] Call Trace: afs_statfs+0xcc/0x180 [kafs] ? p9_client_statfs+0x9e/0x110 [9pnet] ? _cond_resched+0x19/0x40 statfs_by_dentry+0x6d/0x90 vfs_statfs+0x1b/0xc0 user_statfs+0x4b/0x80 SYSC_statfs+0x15/0x30 SyS_statfs+0xe/0x10 entry_SYSCALL_64_fastpath+0x20/0x83 Fixes: d2ddc776a458 ("afs: Overhaul volume and server record caching and fileserver rotation") Reported-by: Marc Dionne <marc.dionne@auristor.com> Signed-off-by: David Howells <dhowells@redhat.com> cc: stable@vger.kernel.org diff fe4d774c Mon Feb 05 23:26:30 MST 2018 David Howells <dhowells@redhat.com> afs: Fix missing cursor clearance afs_select_fileserver() ends the address cursor it is using in the case in which we get some sort of network error and run out of addresses to iterate through, before it jumps to try the next server. This also needs to be done when the server aborts with some sort of error that means we should try the next server. Fix this by: (1) Move the iterate_address afs_end_cursor() call to the next_server case. (2) End the cursor in the failed case. (3) Make afs_end_cursor() clear the ->begun flag and ->addr pointer in the address cursor. (4) Make afs_end_cursor() able to be called on an already cleared cursor. Without this, something like the following oops may occur: AFS: Assertion failed 18446612134397189888 == 0 is false 0xffff88007c279f00 == 0x0 is false ------------[ cut here ]------------ kernel BUG at fs/afs/rotate.c:360! RIP: 0010:afs_select_fileserver+0x79b/0xa30 [kafs] Call Trace: afs_statfs+0xcc/0x180 [kafs] ? p9_client_statfs+0x9e/0x110 [9pnet] ? _cond_resched+0x19/0x40 statfs_by_dentry+0x6d/0x90 vfs_statfs+0x1b/0xc0 user_statfs+0x4b/0x80 SYSC_statfs+0x15/0x30 SyS_statfs+0xe/0x10 entry_SYSCALL_64_fastpath+0x20/0x83 Fixes: d2ddc776a458 ("afs: Overhaul volume and server record caching and fileserver rotation") Reported-by: Marc Dionne <marc.dionne@auristor.com> Signed-off-by: David Howells <dhowells@redhat.com> cc: stable@vger.kernel.org diff fe4d774c Mon Feb 05 23:26:30 MST 2018 David Howells <dhowells@redhat.com> afs: Fix missing cursor clearance afs_select_fileserver() ends the address cursor it is using in the case in which we get some sort of network error and run out of addresses to iterate through, before it jumps to try the next server. This also needs to be done when the server aborts with some sort of error that means we should try the next server. Fix this by: (1) Move the iterate_address afs_end_cursor() call to the next_server case. (2) End the cursor in the failed case. (3) Make afs_end_cursor() clear the ->begun flag and ->addr pointer in the address cursor. (4) Make afs_end_cursor() able to be called on an already cleared cursor. Without this, something like the following oops may occur: AFS: Assertion failed 18446612134397189888 == 0 is false 0xffff88007c279f00 == 0x0 is false ------------[ cut here ]------------ kernel BUG at fs/afs/rotate.c:360! RIP: 0010:afs_select_fileserver+0x79b/0xa30 [kafs] Call Trace: afs_statfs+0xcc/0x180 [kafs] ? p9_client_statfs+0x9e/0x110 [9pnet] ? _cond_resched+0x19/0x40 statfs_by_dentry+0x6d/0x90 vfs_statfs+0x1b/0xc0 user_statfs+0x4b/0x80 SYSC_statfs+0x15/0x30 SyS_statfs+0xe/0x10 entry_SYSCALL_64_fastpath+0x20/0x83 Fixes: d2ddc776a458 ("afs: Overhaul volume and server record caching and fileserver rotation") Reported-by: Marc Dionne <marc.dionne@auristor.com> Signed-off-by: David Howells <dhowells@redhat.com> cc: stable@vger.kernel.org diff fe4d774c Mon Feb 05 23:26:30 MST 2018 David Howells <dhowells@redhat.com> afs: Fix missing cursor clearance afs_select_fileserver() ends the address cursor it is using in the case in which we get some sort of network error and run out of addresses to iterate through, before it jumps to try the next server. This also needs to be done when the server aborts with some sort of error that means we should try the next server. Fix this by: (1) Move the iterate_address afs_end_cursor() call to the next_server case. (2) End the cursor in the failed case. (3) Make afs_end_cursor() clear the ->begun flag and ->addr pointer in the address cursor. (4) Make afs_end_cursor() able to be called on an already cleared cursor. Without this, something like the following oops may occur: AFS: Assertion failed 18446612134397189888 == 0 is false 0xffff88007c279f00 == 0x0 is false ------------[ cut here ]------------ kernel BUG at fs/afs/rotate.c:360! RIP: 0010:afs_select_fileserver+0x79b/0xa30 [kafs] Call Trace: afs_statfs+0xcc/0x180 [kafs] ? p9_client_statfs+0x9e/0x110 [9pnet] ? _cond_resched+0x19/0x40 statfs_by_dentry+0x6d/0x90 vfs_statfs+0x1b/0xc0 user_statfs+0x4b/0x80 SYSC_statfs+0x15/0x30 SyS_statfs+0xe/0x10 entry_SYSCALL_64_fastpath+0x20/0x83 Fixes: d2ddc776a458 ("afs: Overhaul volume and server record caching and fileserver rotation") Reported-by: Marc Dionne <marc.dionne@auristor.com> Signed-off-by: David Howells <dhowells@redhat.com> cc: stable@vger.kernel.org |
H A D | dynroot.c | diff 100ccd18 Fri Nov 24 06:39:02 MST 2023 David Howells <dhowells@redhat.com> netfs: Optimise away reads above the point at which there can be no data Track the file position above which the server is not expected to have any data (the "zero point") and preemptively assume that we can satisfy requests by filling them with zeroes locally rather than attempting to download them if they're over that line - even if we've written data back to the server. Assume that any data that was written back above that position is held in the local cache. Note that we have to split requests that straddle the line. Make use of this to optimise away some reads from the server. We need to set the zero point in the following circumstances: (1) When we see an extant remote inode and have no cache for it, we set the zero_point to i_size. (2) On local inode creation, we set zero_point to 0. (3) On local truncation down, we reduce zero_point to the new i_size if the new i_size is lower. (4) On local truncation up, we don't change zero_point. (5) On local modification, we don't change zero_point. (6) On remote invalidation, we set zero_point to the new i_size. (7) If stored data is discarded from the pagecache or culled from fscache, we must set zero_point above that if the data also got written to the server. (8) If dirty data is written back to the server, but not fscache, we must set zero_point above that. (9) If a direct I/O write is made, set zero_point above that. Assuming the above, any read from the server at or above the zero_point position will return all zeroes. The zero_point value can be stored in the cache, provided the above rules are applied to it by any code that culls part of the local cache. Signed-off-by: David Howells <dhowells@redhat.com> cc: Jeff Layton <jlayton@kernel.org> cc: linux-cachefs@redhat.com cc: linux-fsdevel@vger.kernel.org cc: linux-mm@kvack.org diff 88c853c3 Tue Jul 23 04:24:59 MDT 2019 David Howells <dhowells@redhat.com> afs: Fix cell refcounting by splitting the usage counter Management of the lifetime of afs_cell struct has some problems due to the usage counter being used to determine whether objects of that type are in use in addition to whether anyone might be interested in the structure. This is made trickier by cell objects being cached for a period of time in case they're quickly reused as they hold the result of a setup process that may be slow (DNS lookups, AFS RPC ops). Problems include the cached root volume from alias resolution pinning its parent cell record, rmmod occasionally hanging and occasionally producing assertion failures. Fix this by splitting the count of active users from the struct reference count. Things then work as follows: (1) The cell cache keeps +1 on the cell's activity count and this has to be dropped before the cell can be removed. afs_manage_cell() tries to exchange the 1 to a 0 with the cells_lock write-locked, and if successful, the record is removed from the net->cells. (2) One struct ref is 'owned' by the activity count. That is put when the active count is reduced to 0 (final_destruction label). (3) A ref can be held on a cell whilst it is queued for management on a work queue without confusing the active count. afs_queue_cell() is added to wrap this. (4) The queue's ref is dropped at the end of the management. This is split out into a separate function, afs_manage_cell_work(). (5) The root volume record is put after a cell is removed (at the final_destruction label) rather then in the RCU destruction routine. (6) Volumes hold struct refs, but aren't active users. (7) Both counts are displayed in /proc/net/afs/cells. There are some management function changes: (*) afs_put_cell() now just decrements the refcount and triggers the RCU destruction if it becomes 0. It no longer sets a timer to have the manager do this. (*) afs_use_cell() and afs_unuse_cell() are added to increase and decrease the active count. afs_unuse_cell() sets the management timer. (*) afs_queue_cell() is added to queue a cell with approprate refs. There are also some other fixes: (*) Don't let /proc/net/afs/cells access a cell's vllist if it's NULL. (*) Make sure that candidate cells in lookups are properly destroyed rather than being simply kfree'd. This ensures the bits it points to are destroyed also. (*) afs_dec_cells_outstanding() is now called in cell destruction rather than at "final_destruction". This ensures that cell->net is still valid to the end of the destructor. (*) As a consequence of the previous two changes, move the increment of net->cells_outstanding that was at the point of insertion into the tree to the allocation routine to correctly balance things. Fixes: 989782dcdc91 ("afs: Overhaul cell database management") Signed-off-by: David Howells <dhowells@redhat.com> diff 88c853c3 Tue Jul 23 04:24:59 MDT 2019 David Howells <dhowells@redhat.com> afs: Fix cell refcounting by splitting the usage counter Management of the lifetime of afs_cell struct has some problems due to the usage counter being used to determine whether objects of that type are in use in addition to whether anyone might be interested in the structure. This is made trickier by cell objects being cached for a period of time in case they're quickly reused as they hold the result of a setup process that may be slow (DNS lookups, AFS RPC ops). Problems include the cached root volume from alias resolution pinning its parent cell record, rmmod occasionally hanging and occasionally producing assertion failures. Fix this by splitting the count of active users from the struct reference count. Things then work as follows: (1) The cell cache keeps +1 on the cell's activity count and this has to be dropped before the cell can be removed. afs_manage_cell() tries to exchange the 1 to a 0 with the cells_lock write-locked, and if successful, the record is removed from the net->cells. (2) One struct ref is 'owned' by the activity count. That is put when the active count is reduced to 0 (final_destruction label). (3) A ref can be held on a cell whilst it is queued for management on a work queue without confusing the active count. afs_queue_cell() is added to wrap this. (4) The queue's ref is dropped at the end of the management. This is split out into a separate function, afs_manage_cell_work(). (5) The root volume record is put after a cell is removed (at the final_destruction label) rather then in the RCU destruction routine. (6) Volumes hold struct refs, but aren't active users. (7) Both counts are displayed in /proc/net/afs/cells. There are some management function changes: (*) afs_put_cell() now just decrements the refcount and triggers the RCU destruction if it becomes 0. It no longer sets a timer to have the manager do this. (*) afs_use_cell() and afs_unuse_cell() are added to increase and decrease the active count. afs_unuse_cell() sets the management timer. (*) afs_queue_cell() is added to queue a cell with approprate refs. There are also some other fixes: (*) Don't let /proc/net/afs/cells access a cell's vllist if it's NULL. (*) Make sure that candidate cells in lookups are properly destroyed rather than being simply kfree'd. This ensures the bits it points to are destroyed also. (*) afs_dec_cells_outstanding() is now called in cell destruction rather than at "final_destruction". This ensures that cell->net is still valid to the end of the destructor. (*) As a consequence of the previous two changes, move the increment of net->cells_outstanding that was at the point of insertion into the tree to the allocation routine to correctly balance things. Fixes: 989782dcdc91 ("afs: Overhaul cell database management") Signed-off-by: David Howells <dhowells@redhat.com> diff 88c853c3 Tue Jul 23 04:24:59 MDT 2019 David Howells <dhowells@redhat.com> afs: Fix cell refcounting by splitting the usage counter Management of the lifetime of afs_cell struct has some problems due to the usage counter being used to determine whether objects of that type are in use in addition to whether anyone might be interested in the structure. This is made trickier by cell objects being cached for a period of time in case they're quickly reused as they hold the result of a setup process that may be slow (DNS lookups, AFS RPC ops). Problems include the cached root volume from alias resolution pinning its parent cell record, rmmod occasionally hanging and occasionally producing assertion failures. Fix this by splitting the count of active users from the struct reference count. Things then work as follows: (1) The cell cache keeps +1 on the cell's activity count and this has to be dropped before the cell can be removed. afs_manage_cell() tries to exchange the 1 to a 0 with the cells_lock write-locked, and if successful, the record is removed from the net->cells. (2) One struct ref is 'owned' by the activity count. That is put when the active count is reduced to 0 (final_destruction label). (3) A ref can be held on a cell whilst it is queued for management on a work queue without confusing the active count. afs_queue_cell() is added to wrap this. (4) The queue's ref is dropped at the end of the management. This is split out into a separate function, afs_manage_cell_work(). (5) The root volume record is put after a cell is removed (at the final_destruction label) rather then in the RCU destruction routine. (6) Volumes hold struct refs, but aren't active users. (7) Both counts are displayed in /proc/net/afs/cells. There are some management function changes: (*) afs_put_cell() now just decrements the refcount and triggers the RCU destruction if it becomes 0. It no longer sets a timer to have the manager do this. (*) afs_use_cell() and afs_unuse_cell() are added to increase and decrease the active count. afs_unuse_cell() sets the management timer. (*) afs_queue_cell() is added to queue a cell with approprate refs. There are also some other fixes: (*) Don't let /proc/net/afs/cells access a cell's vllist if it's NULL. (*) Make sure that candidate cells in lookups are properly destroyed rather than being simply kfree'd. This ensures the bits it points to are destroyed also. (*) afs_dec_cells_outstanding() is now called in cell destruction rather than at "final_destruction". This ensures that cell->net is still valid to the end of the destructor. (*) As a consequence of the previous two changes, move the increment of net->cells_outstanding that was at the point of insertion into the tree to the allocation routine to correctly balance things. Fixes: 989782dcdc91 ("afs: Overhaul cell database management") Signed-off-by: David Howells <dhowells@redhat.com> diff 92e3cc91 Fri Oct 09 07:11:58 MDT 2020 David Howells <dhowells@redhat.com> afs: Fix rapid cell addition/removal by not using RCU on cells tree There are a number of problems that are being seen by the rapidly mounting and unmounting an afs dynamic root with an explicit cell and volume specified (which should probably be rejected, but that's a separate issue): What the tests are doing is to look up/create a cell record for the name given and then tear it down again without actually using it to try to talk to a server. This is repeated endlessly, very fast, and the new cell collides with the old one if it's not quick enough to reuse it. It appears (as suggested by Hillf Danton) that the search through the RB tree under a read_seqbegin_or_lock() under RCU conditions isn't safe and that it's not blocking the write_seqlock(), despite taking two passes at it. He suggested that the code should take a ref on the cell it's attempting to look at - but this shouldn't be necessary until we've compared the cell names. It's possible that I'm missing a barrier somewhere. However, using an RCU search for this is overkill, really - we only need to access the cell name in a few places, and they're places where we're may end up sleeping anyway. Fix this by switching to an R/W semaphore instead. Additionally, draw the down_read() call inside the function (renamed to afs_find_cell()) since all the callers were taking the RCU read lock (or should've been[*]). [*] afs_probe_cell_name() should have been, but that doesn't appear to be involved in the bug reports. The symptoms of this look like: general protection fault, probably for non-canonical address 0xf27d208691691fdb: 0000 [#1] PREEMPT SMP KASAN KASAN: maybe wild-memory-access in range [0x93e924348b48fed8-0x93e924348b48fedf] ... RIP: 0010:strncasecmp lib/string.c:52 [inline] RIP: 0010:strncasecmp+0x5f/0x240 lib/string.c:43 afs_lookup_cell_rcu+0x313/0x720 fs/afs/cell.c:88 afs_lookup_cell+0x2ee/0x1440 fs/afs/cell.c:249 afs_parse_source fs/afs/super.c:290 [inline] ... Fixes: 989782dcdc91 ("afs: Overhaul cell database management") Reported-by: syzbot+459a5dce0b4cb70fd076@syzkaller.appspotmail.com Signed-off-by: David Howells <dhowells@redhat.com> cc: Hillf Danton <hdanton@sina.com> cc: syzkaller-bugs@googlegroups.com diff 92e3cc91 Fri Oct 09 07:11:58 MDT 2020 David Howells <dhowells@redhat.com> afs: Fix rapid cell addition/removal by not using RCU on cells tree There are a number of problems that are being seen by the rapidly mounting and unmounting an afs dynamic root with an explicit cell and volume specified (which should probably be rejected, but that's a separate issue): What the tests are doing is to look up/create a cell record for the name given and then tear it down again without actually using it to try to talk to a server. This is repeated endlessly, very fast, and the new cell collides with the old one if it's not quick enough to reuse it. It appears (as suggested by Hillf Danton) that the search through the RB tree under a read_seqbegin_or_lock() under RCU conditions isn't safe and that it's not blocking the write_seqlock(), despite taking two passes at it. He suggested that the code should take a ref on the cell it's attempting to look at - but this shouldn't be necessary until we've compared the cell names. It's possible that I'm missing a barrier somewhere. However, using an RCU search for this is overkill, really - we only need to access the cell name in a few places, and they're places where we're may end up sleeping anyway. Fix this by switching to an R/W semaphore instead. Additionally, draw the down_read() call inside the function (renamed to afs_find_cell()) since all the callers were taking the RCU read lock (or should've been[*]). [*] afs_probe_cell_name() should have been, but that doesn't appear to be involved in the bug reports. The symptoms of this look like: general protection fault, probably for non-canonical address 0xf27d208691691fdb: 0000 [#1] PREEMPT SMP KASAN KASAN: maybe wild-memory-access in range [0x93e924348b48fed8-0x93e924348b48fedf] ... RIP: 0010:strncasecmp lib/string.c:52 [inline] RIP: 0010:strncasecmp+0x5f/0x240 lib/string.c:43 afs_lookup_cell_rcu+0x313/0x720 fs/afs/cell.c:88 afs_lookup_cell+0x2ee/0x1440 fs/afs/cell.c:249 afs_parse_source fs/afs/super.c:290 [inline] ... Fixes: 989782dcdc91 ("afs: Overhaul cell database management") Reported-by: syzbot+459a5dce0b4cb70fd076@syzkaller.appspotmail.com Signed-off-by: David Howells <dhowells@redhat.com> cc: Hillf Danton <hdanton@sina.com> cc: syzkaller-bugs@googlegroups.com diff 92e3cc91 Fri Oct 09 07:11:58 MDT 2020 David Howells <dhowells@redhat.com> afs: Fix rapid cell addition/removal by not using RCU on cells tree There are a number of problems that are being seen by the rapidly mounting and unmounting an afs dynamic root with an explicit cell and volume specified (which should probably be rejected, but that's a separate issue): What the tests are doing is to look up/create a cell record for the name given and then tear it down again without actually using it to try to talk to a server. This is repeated endlessly, very fast, and the new cell collides with the old one if it's not quick enough to reuse it. It appears (as suggested by Hillf Danton) that the search through the RB tree under a read_seqbegin_or_lock() under RCU conditions isn't safe and that it's not blocking the write_seqlock(), despite taking two passes at it. He suggested that the code should take a ref on the cell it's attempting to look at - but this shouldn't be necessary until we've compared the cell names. It's possible that I'm missing a barrier somewhere. However, using an RCU search for this is overkill, really - we only need to access the cell name in a few places, and they're places where we're may end up sleeping anyway. Fix this by switching to an R/W semaphore instead. Additionally, draw the down_read() call inside the function (renamed to afs_find_cell()) since all the callers were taking the RCU read lock (or should've been[*]). [*] afs_probe_cell_name() should have been, but that doesn't appear to be involved in the bug reports. The symptoms of this look like: general protection fault, probably for non-canonical address 0xf27d208691691fdb: 0000 [#1] PREEMPT SMP KASAN KASAN: maybe wild-memory-access in range [0x93e924348b48fed8-0x93e924348b48fedf] ... RIP: 0010:strncasecmp lib/string.c:52 [inline] RIP: 0010:strncasecmp+0x5f/0x240 lib/string.c:43 afs_lookup_cell_rcu+0x313/0x720 fs/afs/cell.c:88 afs_lookup_cell+0x2ee/0x1440 fs/afs/cell.c:249 afs_parse_source fs/afs/super.c:290 [inline] ... Fixes: 989782dcdc91 ("afs: Overhaul cell database management") Reported-by: syzbot+459a5dce0b4cb70fd076@syzkaller.appspotmail.com Signed-off-by: David Howells <dhowells@redhat.com> cc: Hillf Danton <hdanton@sina.com> cc: syzkaller-bugs@googlegroups.com diff 92e3cc91 Fri Oct 09 07:11:58 MDT 2020 David Howells <dhowells@redhat.com> afs: Fix rapid cell addition/removal by not using RCU on cells tree There are a number of problems that are being seen by the rapidly mounting and unmounting an afs dynamic root with an explicit cell and volume specified (which should probably be rejected, but that's a separate issue): What the tests are doing is to look up/create a cell record for the name given and then tear it down again without actually using it to try to talk to a server. This is repeated endlessly, very fast, and the new cell collides with the old one if it's not quick enough to reuse it. It appears (as suggested by Hillf Danton) that the search through the RB tree under a read_seqbegin_or_lock() under RCU conditions isn't safe and that it's not blocking the write_seqlock(), despite taking two passes at it. He suggested that the code should take a ref on the cell it's attempting to look at - but this shouldn't be necessary until we've compared the cell names. It's possible that I'm missing a barrier somewhere. However, using an RCU search for this is overkill, really - we only need to access the cell name in a few places, and they're places where we're may end up sleeping anyway. Fix this by switching to an R/W semaphore instead. Additionally, draw the down_read() call inside the function (renamed to afs_find_cell()) since all the callers were taking the RCU read lock (or should've been[*]). [*] afs_probe_cell_name() should have been, but that doesn't appear to be involved in the bug reports. The symptoms of this look like: general protection fault, probably for non-canonical address 0xf27d208691691fdb: 0000 [#1] PREEMPT SMP KASAN KASAN: maybe wild-memory-access in range [0x93e924348b48fed8-0x93e924348b48fedf] ... RIP: 0010:strncasecmp lib/string.c:52 [inline] RIP: 0010:strncasecmp+0x5f/0x240 lib/string.c:43 afs_lookup_cell_rcu+0x313/0x720 fs/afs/cell.c:88 afs_lookup_cell+0x2ee/0x1440 fs/afs/cell.c:249 afs_parse_source fs/afs/super.c:290 [inline] ... Fixes: 989782dcdc91 ("afs: Overhaul cell database management") Reported-by: syzbot+459a5dce0b4cb70fd076@syzkaller.appspotmail.com Signed-off-by: David Howells <dhowells@redhat.com> cc: Hillf Danton <hdanton@sina.com> cc: syzkaller-bugs@googlegroups.com diff 92e3cc91 Fri Oct 09 07:11:58 MDT 2020 David Howells <dhowells@redhat.com> afs: Fix rapid cell addition/removal by not using RCU on cells tree There are a number of problems that are being seen by the rapidly mounting and unmounting an afs dynamic root with an explicit cell and volume specified (which should probably be rejected, but that's a separate issue): What the tests are doing is to look up/create a cell record for the name given and then tear it down again without actually using it to try to talk to a server. This is repeated endlessly, very fast, and the new cell collides with the old one if it's not quick enough to reuse it. It appears (as suggested by Hillf Danton) that the search through the RB tree under a read_seqbegin_or_lock() under RCU conditions isn't safe and that it's not blocking the write_seqlock(), despite taking two passes at it. He suggested that the code should take a ref on the cell it's attempting to look at - but this shouldn't be necessary until we've compared the cell names. It's possible that I'm missing a barrier somewhere. However, using an RCU search for this is overkill, really - we only need to access the cell name in a few places, and they're places where we're may end up sleeping anyway. Fix this by switching to an R/W semaphore instead. Additionally, draw the down_read() call inside the function (renamed to afs_find_cell()) since all the callers were taking the RCU read lock (or should've been[*]). [*] afs_probe_cell_name() should have been, but that doesn't appear to be involved in the bug reports. The symptoms of this look like: general protection fault, probably for non-canonical address 0xf27d208691691fdb: 0000 [#1] PREEMPT SMP KASAN KASAN: maybe wild-memory-access in range [0x93e924348b48fed8-0x93e924348b48fedf] ... RIP: 0010:strncasecmp lib/string.c:52 [inline] RIP: 0010:strncasecmp+0x5f/0x240 lib/string.c:43 afs_lookup_cell_rcu+0x313/0x720 fs/afs/cell.c:88 afs_lookup_cell+0x2ee/0x1440 fs/afs/cell.c:249 afs_parse_source fs/afs/super.c:290 [inline] ... Fixes: 989782dcdc91 ("afs: Overhaul cell database management") Reported-by: syzbot+459a5dce0b4cb70fd076@syzkaller.appspotmail.com Signed-off-by: David Howells <dhowells@redhat.com> cc: Hillf Danton <hdanton@sina.com> cc: syzkaller-bugs@googlegroups.com diff 92e3cc91 Fri Oct 09 07:11:58 MDT 2020 David Howells <dhowells@redhat.com> afs: Fix rapid cell addition/removal by not using RCU on cells tree There are a number of problems that are being seen by the rapidly mounting and unmounting an afs dynamic root with an explicit cell and volume specified (which should probably be rejected, but that's a separate issue): What the tests are doing is to look up/create a cell record for the name given and then tear it down again without actually using it to try to talk to a server. This is repeated endlessly, very fast, and the new cell collides with the old one if it's not quick enough to reuse it. It appears (as suggested by Hillf Danton) that the search through the RB tree under a read_seqbegin_or_lock() under RCU conditions isn't safe and that it's not blocking the write_seqlock(), despite taking two passes at it. He suggested that the code should take a ref on the cell it's attempting to look at - but this shouldn't be necessary until we've compared the cell names. It's possible that I'm missing a barrier somewhere. However, using an RCU search for this is overkill, really - we only need to access the cell name in a few places, and they're places where we're may end up sleeping anyway. Fix this by switching to an R/W semaphore instead. Additionally, draw the down_read() call inside the function (renamed to afs_find_cell()) since all the callers were taking the RCU read lock (or should've been[*]). [*] afs_probe_cell_name() should have been, but that doesn't appear to be involved in the bug reports. The symptoms of this look like: general protection fault, probably for non-canonical address 0xf27d208691691fdb: 0000 [#1] PREEMPT SMP KASAN KASAN: maybe wild-memory-access in range [0x93e924348b48fed8-0x93e924348b48fedf] ... RIP: 0010:strncasecmp lib/string.c:52 [inline] RIP: 0010:strncasecmp+0x5f/0x240 lib/string.c:43 afs_lookup_cell_rcu+0x313/0x720 fs/afs/cell.c:88 afs_lookup_cell+0x2ee/0x1440 fs/afs/cell.c:249 afs_parse_source fs/afs/super.c:290 [inline] ... Fixes: 989782dcdc91 ("afs: Overhaul cell database management") Reported-by: syzbot+459a5dce0b4cb70fd076@syzkaller.appspotmail.com Signed-off-by: David Howells <dhowells@redhat.com> cc: Hillf Danton <hdanton@sina.com> cc: syzkaller-bugs@googlegroups.com diff 92e3cc91 Fri Oct 09 07:11:58 MDT 2020 David Howells <dhowells@redhat.com> afs: Fix rapid cell addition/removal by not using RCU on cells tree There are a number of problems that are being seen by the rapidly mounting and unmounting an afs dynamic root with an explicit cell and volume specified (which should probably be rejected, but that's a separate issue): What the tests are doing is to look up/create a cell record for the name given and then tear it down again without actually using it to try to talk to a server. This is repeated endlessly, very fast, and the new cell collides with the old one if it's not quick enough to reuse it. It appears (as suggested by Hillf Danton) that the search through the RB tree under a read_seqbegin_or_lock() under RCU conditions isn't safe and that it's not blocking the write_seqlock(), despite taking two passes at it. He suggested that the code should take a ref on the cell it's attempting to look at - but this shouldn't be necessary until we've compared the cell names. It's possible that I'm missing a barrier somewhere. However, using an RCU search for this is overkill, really - we only need to access the cell name in a few places, and they're places where we're may end up sleeping anyway. Fix this by switching to an R/W semaphore instead. Additionally, draw the down_read() call inside the function (renamed to afs_find_cell()) since all the callers were taking the RCU read lock (or should've been[*]). [*] afs_probe_cell_name() should have been, but that doesn't appear to be involved in the bug reports. The symptoms of this look like: general protection fault, probably for non-canonical address 0xf27d208691691fdb: 0000 [#1] PREEMPT SMP KASAN KASAN: maybe wild-memory-access in range [0x93e924348b48fed8-0x93e924348b48fedf] ... RIP: 0010:strncasecmp lib/string.c:52 [inline] RIP: 0010:strncasecmp+0x5f/0x240 lib/string.c:43 afs_lookup_cell_rcu+0x313/0x720 fs/afs/cell.c:88 afs_lookup_cell+0x2ee/0x1440 fs/afs/cell.c:249 afs_parse_source fs/afs/super.c:290 [inline] ... Fixes: 989782dcdc91 ("afs: Overhaul cell database management") Reported-by: syzbot+459a5dce0b4cb70fd076@syzkaller.appspotmail.com Signed-off-by: David Howells <dhowells@redhat.com> cc: Hillf Danton <hdanton@sina.com> cc: syzkaller-bugs@googlegroups.com diff 92e3cc91 Fri Oct 09 07:11:58 MDT 2020 David Howells <dhowells@redhat.com> afs: Fix rapid cell addition/removal by not using RCU on cells tree There are a number of problems that are being seen by the rapidly mounting and unmounting an afs dynamic root with an explicit cell and volume specified (which should probably be rejected, but that's a separate issue): What the tests are doing is to look up/create a cell record for the name given and then tear it down again without actually using it to try to talk to a server. This is repeated endlessly, very fast, and the new cell collides with the old one if it's not quick enough to reuse it. It appears (as suggested by Hillf Danton) that the search through the RB tree under a read_seqbegin_or_lock() under RCU conditions isn't safe and that it's not blocking the write_seqlock(), despite taking two passes at it. He suggested that the code should take a ref on the cell it's attempting to look at - but this shouldn't be necessary until we've compared the cell names. It's possible that I'm missing a barrier somewhere. However, using an RCU search for this is overkill, really - we only need to access the cell name in a few places, and they're places where we're may end up sleeping anyway. Fix this by switching to an R/W semaphore instead. Additionally, draw the down_read() call inside the function (renamed to afs_find_cell()) since all the callers were taking the RCU read lock (or should've been[*]). [*] afs_probe_cell_name() should have been, but that doesn't appear to be involved in the bug reports. The symptoms of this look like: general protection fault, probably for non-canonical address 0xf27d208691691fdb: 0000 [#1] PREEMPT SMP KASAN KASAN: maybe wild-memory-access in range [0x93e924348b48fed8-0x93e924348b48fedf] ... RIP: 0010:strncasecmp lib/string.c:52 [inline] RIP: 0010:strncasecmp+0x5f/0x240 lib/string.c:43 afs_lookup_cell_rcu+0x313/0x720 fs/afs/cell.c:88 afs_lookup_cell+0x2ee/0x1440 fs/afs/cell.c:249 afs_parse_source fs/afs/super.c:290 [inline] ... Fixes: 989782dcdc91 ("afs: Overhaul cell database management") Reported-by: syzbot+459a5dce0b4cb70fd076@syzkaller.appspotmail.com Signed-off-by: David Howells <dhowells@redhat.com> cc: Hillf Danton <hdanton@sina.com> cc: syzkaller-bugs@googlegroups.com diff 92e3cc91 Fri Oct 09 07:11:58 MDT 2020 David Howells <dhowells@redhat.com> afs: Fix rapid cell addition/removal by not using RCU on cells tree There are a number of problems that are being seen by the rapidly mounting and unmounting an afs dynamic root with an explicit cell and volume specified (which should probably be rejected, but that's a separate issue): What the tests are doing is to look up/create a cell record for the name given and then tear it down again without actually using it to try to talk to a server. This is repeated endlessly, very fast, and the new cell collides with the old one if it's not quick enough to reuse it. It appears (as suggested by Hillf Danton) that the search through the RB tree under a read_seqbegin_or_lock() under RCU conditions isn't safe and that it's not blocking the write_seqlock(), despite taking two passes at it. He suggested that the code should take a ref on the cell it's attempting to look at - but this shouldn't be necessary until we've compared the cell names. It's possible that I'm missing a barrier somewhere. However, using an RCU search for this is overkill, really - we only need to access the cell name in a few places, and they're places where we're may end up sleeping anyway. Fix this by switching to an R/W semaphore instead. Additionally, draw the down_read() call inside the function (renamed to afs_find_cell()) since all the callers were taking the RCU read lock (or should've been[*]). [*] afs_probe_cell_name() should have been, but that doesn't appear to be involved in the bug reports. The symptoms of this look like: general protection fault, probably for non-canonical address 0xf27d208691691fdb: 0000 [#1] PREEMPT SMP KASAN KASAN: maybe wild-memory-access in range [0x93e924348b48fed8-0x93e924348b48fedf] ... RIP: 0010:strncasecmp lib/string.c:52 [inline] RIP: 0010:strncasecmp+0x5f/0x240 lib/string.c:43 afs_lookup_cell_rcu+0x313/0x720 fs/afs/cell.c:88 afs_lookup_cell+0x2ee/0x1440 fs/afs/cell.c:249 afs_parse_source fs/afs/super.c:290 [inline] ... Fixes: 989782dcdc91 ("afs: Overhaul cell database management") Reported-by: syzbot+459a5dce0b4cb70fd076@syzkaller.appspotmail.com Signed-off-by: David Howells <dhowells@redhat.com> cc: Hillf Danton <hdanton@sina.com> cc: syzkaller-bugs@googlegroups.com |
H A D | Makefile | diff f94f70d3 Fri Oct 27 04:42:57 MDT 2023 David Howells <dhowells@redhat.com> afs: Provide a way to configure address priorities AFS servers may have multiple addresses, but the client can't easily judge between them as to which one is best. For instance, an address that has a larger RTT might actually have a better bandwidth because it goes through a switch rather than being directly connected - but we can't work this out dynamically unless we push through sufficient data that we can measure it. To allow the administrator to configure this, add a list of preference weightings for server addresses by IPv4/IPv6 address or subnet and allow this to be viewed through a procfile and altered by writing text commands to that same file. Preference rules can be added/updated by: echo "add <proto> <addr>[/<subnet>] <prior>" >/proc/fs/afs/addr_prefs echo "add udp 1.2.3.4 1000" >/proc/fs/afs/addr_prefs echo "add udp 192.168.0.0/16 3000" >/proc/fs/afs/addr_prefs echo "add udp 1001:2002:0:6::/64 4000" >/proc/fs/afs/addr_prefs and removed by: echo "del <proto> <addr>[/<subnet>]" >/proc/fs/afs/addr_prefs echo "del udp 1.2.3.4" >/proc/fs/afs/addr_prefs where the priority is a number between 0 and 65535. The list is split between IPv4 and IPv6 addresses and each sublist is kept in numerical order, with rules that would otherwise match but have different subnet masking being ordered with the most specific submatch first. A subsequent patch will apply these rules. Signed-off-by: David Howells <dhowells@redhat.com> cc: Marc Dionne <marc.dionne@auristor.com> cc: linux-afs@lists.infradead.org diff f94f70d3 Fri Oct 27 04:42:57 MDT 2023 David Howells <dhowells@redhat.com> afs: Provide a way to configure address priorities AFS servers may have multiple addresses, but the client can't easily judge between them as to which one is best. For instance, an address that has a larger RTT might actually have a better bandwidth because it goes through a switch rather than being directly connected - but we can't work this out dynamically unless we push through sufficient data that we can measure it. To allow the administrator to configure this, add a list of preference weightings for server addresses by IPv4/IPv6 address or subnet and allow this to be viewed through a procfile and altered by writing text commands to that same file. Preference rules can be added/updated by: echo "add <proto> <addr>[/<subnet>] <prior>" >/proc/fs/afs/addr_prefs echo "add udp 1.2.3.4 1000" >/proc/fs/afs/addr_prefs echo "add udp 192.168.0.0/16 3000" >/proc/fs/afs/addr_prefs echo "add udp 1001:2002:0:6::/64 4000" >/proc/fs/afs/addr_prefs and removed by: echo "del <proto> <addr>[/<subnet>]" >/proc/fs/afs/addr_prefs echo "del udp 1.2.3.4" >/proc/fs/afs/addr_prefs where the priority is a number between 0 and 65535. The list is split between IPv4 and IPv6 addresses and each sublist is kept in numerical order, with rules that would otherwise match but have different subnet masking being ordered with the most specific submatch first. A subsequent patch will apply these rules. Signed-off-by: David Howells <dhowells@redhat.com> cc: Marc Dionne <marc.dionne@auristor.com> cc: linux-afs@lists.infradead.org diff 523d27cd Thu Feb 06 07:22:21 MST 2020 David Howells <dhowells@redhat.com> afs: Convert afs to use the new fscache API Change the afs filesystem to support the new afs driver. The following changes have been made: (1) The fscache_netfs struct is no more, and there's no need to register the filesystem as a whole. There's also no longer a cell cookie. (2) The volume cookie is now an fscache_volume cookie, allocated with fscache_acquire_volume(). This function takes three parameters: a string representing the "volume" in the index, a string naming the cache to use (or NULL) and a u64 that conveys coherency metadata for the volume. For afs, I've made it render the volume name string as: "afs,<cell>,<volume_id>" and the coherency data is currently 0. (3) The fscache_cookie_def is no more and needed information is passed directly to fscache_acquire_cookie(). The cache no longer calls back into the filesystem, but rather metadata changes are indicated at other times. fscache_acquire_cookie() is passed the same keying and coherency information as before, except that these are now stored in big endian form instead of cpu endian. This makes the cache more copyable. (4) fscache_use_cookie() and fscache_unuse_cookie() are called when a file is opened or closed to prevent a cache file from being culled and to keep resources to hand that are needed to do I/O. fscache_use_cookie() is given an indication if the cache is likely to be modified locally (e.g. the file is open for writing). fscache_unuse_cookie() is given a coherency update if we had the file open for writing and will update that. (5) fscache_invalidate() is now given uptodate auxiliary data and a file size. It can also take a flag to indicate if this was due to a DIO write. This is wrapped into afs_fscache_invalidate() now for convenience. (6) fscache_resize() now gets called from the finalisation of afs_setattr(), and afs_setattr() does use/unuse of the cookie around the call to support this. (7) fscache_note_page_release() is called from afs_release_page(). (8) Use a killable wait in nfs_vm_page_mkwrite() when waiting for PG_fscache to be cleared. Render the parts of the cookie key for an afs inode cookie as big endian. Changes ======= ver #2: - Use gfpflags_allow_blocking() rather than using flag directly. - fscache_acquire_volume() now returns errors. Signed-off-by: David Howells <dhowells@redhat.com> Acked-by: Jeff Layton <jlayton@kernel.org> Tested-by: kafs-testing@auristor.com cc: Marc Dionne <marc.dionne@auristor.com> cc: linux-afs@lists.infradead.org cc: linux-cachefs@redhat.com Link: https://lore.kernel.org/r/163819661382.215744.1485608824741611837.stgit@warthog.procyon.org.uk/ # v1 Link: https://lore.kernel.org/r/163906970002.143852.17678518584089878259.stgit@warthog.procyon.org.uk/ # v2 Link: https://lore.kernel.org/r/163967174665.1823006.1301789965454084220.stgit@warthog.procyon.org.uk/ # v3 Link: https://lore.kernel.org/r/164021568841.640689.6684240152253400380.stgit@warthog.procyon.org.uk/ # v4 diff 0a5143f2 Fri Oct 19 17:57:57 MDT 2018 David Howells <dhowells@redhat.com> afs: Implement VL server rotation Track VL servers as independent entities rather than lumping all their addresses together into one set and implement server-level rotation by: (1) Add the concept of a VL server list, where each server has its own separate address list. This code is similar to the FS server list. (2) Use the DNS resolver to retrieve a set of servers and their associated addresses, ports, preference and weight ratings. (3) In the case of a legacy DNS resolver or an address list given directly through /proc/net/afs/cells, create a list containing just a dummy server record and attach all the addresses to that. (4) Implement a simple rotation policy, for the moment ignoring the priorities and weights assigned to the servers. (5) Show the address list through /proc/net/afs/<cell>/vlservers. This also displays the source and status of the data as indicated by the upcall. Signed-off-by: David Howells <dhowells@redhat.com> diff 0a5143f2 Fri Oct 19 17:57:57 MDT 2018 David Howells <dhowells@redhat.com> afs: Implement VL server rotation Track VL servers as independent entities rather than lumping all their addresses together into one set and implement server-level rotation by: (1) Add the concept of a VL server list, where each server has its own separate address list. This code is similar to the FS server list. (2) Use the DNS resolver to retrieve a set of servers and their associated addresses, ports, preference and weight ratings. (3) In the case of a legacy DNS resolver or an address list given directly through /proc/net/afs/cells, create a list containing just a dummy server record and attach all the addresses to that. (4) Implement a simple rotation policy, for the moment ignoring the priorities and weights assigned to the servers. (5) Show the address list through /proc/net/afs/<cell>/vlservers. This also displays the source and status of the data as indicated by the upcall. Signed-off-by: David Howells <dhowells@redhat.com> |
H A D | vlclient.c | diff 0b9bf381 Thu Apr 25 07:26:50 MDT 2019 David Howells <dhowells@redhat.com> afs: Split wait from afs_make_call() Split the call to afs_wait_for_call_to_complete() from afs_make_call() to make it easier to handle asynchronous calls and to make it easier to convert a synchronous call to an asynchronous one in future, for instance when someone tries to interrupt an operation by pressing Ctrl-C. Signed-off-by: David Howells <dhowells@redhat.com> diff 0a5143f2 Fri Oct 19 17:57:57 MDT 2018 David Howells <dhowells@redhat.com> afs: Implement VL server rotation Track VL servers as independent entities rather than lumping all their addresses together into one set and implement server-level rotation by: (1) Add the concept of a VL server list, where each server has its own separate address list. This code is similar to the FS server list. (2) Use the DNS resolver to retrieve a set of servers and their associated addresses, ports, preference and weight ratings. (3) In the case of a legacy DNS resolver or an address list given directly through /proc/net/afs/cells, create a list containing just a dummy server record and attach all the addresses to that. (4) Implement a simple rotation policy, for the moment ignoring the priorities and weights assigned to the servers. (5) Show the address list through /proc/net/afs/<cell>/vlservers. This also displays the source and status of the data as indicated by the upcall. Signed-off-by: David Howells <dhowells@redhat.com> diff 0a5143f2 Fri Oct 19 17:57:57 MDT 2018 David Howells <dhowells@redhat.com> afs: Implement VL server rotation Track VL servers as independent entities rather than lumping all their addresses together into one set and implement server-level rotation by: (1) Add the concept of a VL server list, where each server has its own separate address list. This code is similar to the FS server list. (2) Use the DNS resolver to retrieve a set of servers and their associated addresses, ports, preference and weight ratings. (3) In the case of a legacy DNS resolver or an address list given directly through /proc/net/afs/cells, create a list containing just a dummy server record and attach all the addresses to that. (4) Implement a simple rotation policy, for the moment ignoring the priorities and weights assigned to the servers. (5) Show the address list through /proc/net/afs/<cell>/vlservers. This also displays the source and status of the data as indicated by the upcall. Signed-off-by: David Howells <dhowells@redhat.com> diff 3838d3ec Thu Nov 02 09:27:47 MDT 2017 David Howells <dhowells@redhat.com> afs: Allow IPv6 address specification of VL servers Allow VL server specifications to be given IPv6 addresses as well as IPv4 addresses, for example as: echo add foo.org 1111:2222:3333:0:4444:5555:6666:7777 >/proc/fs/afs/cells Note that ':' is the expected separator for separating IPv4 addresses, but if a ',' is detected or no '.' is detected in the string, the delimiter is switched to ','. This also works with DNS AFSDB or SRV record strings fetched by upcall from userspace. Signed-off-by: David Howells <dhowells@redhat.com> diff 372ee163 Wed Aug 03 07:11:40 MDT 2016 David Howells <dhowells@redhat.com> rxrpc: Fix races between skb free, ACK generation and replying Inside the kafs filesystem it is possible to occasionally have a call processed and terminated before we've had a chance to check whether we need to clean up the rx queue for that call because afs_send_simple_reply() ends the call when it is done, but this is done in a workqueue item that might happen to run to completion before afs_deliver_to_call() completes. Further, it is possible for rxrpc_kernel_send_data() to be called to send a reply before the last request-phase data skb is released. The rxrpc skb destructor is where the ACK processing is done and the call state is advanced upon release of the last skb. ACK generation is also deferred to a work item because it's possible that the skb destructor is not called in a context where kernel_sendmsg() can be invoked. To this end, the following changes are made: (1) kernel_rxrpc_data_consumed() is added. This should be called whenever an skb is emptied so as to crank the ACK and call states. This does not release the skb, however. kernel_rxrpc_free_skb() must now be called to achieve that. These together replace rxrpc_kernel_data_delivered(). (2) kernel_rxrpc_data_consumed() is wrapped by afs_data_consumed(). This makes afs_deliver_to_call() easier to work as the skb can simply be discarded unconditionally here without trying to work out what the return value of the ->deliver() function means. The ->deliver() functions can, via afs_data_complete(), afs_transfer_reply() and afs_extract_data() mark that an skb has been consumed (thereby cranking the state) without the need to conditionally free the skb to make sure the state is correct on an incoming call for when the call processor tries to send the reply. (3) rxrpc_recvmsg() now has to call kernel_rxrpc_data_consumed() when it has finished with a packet and MSG_PEEK isn't set. (4) rxrpc_packet_destructor() no longer calls rxrpc_hard_ACK_data(). Because of this, we no longer need to clear the destructor and put the call before we free the skb in cases where we don't want the ACK/call state to be cranked. (5) The ->deliver() call-type callbacks are made to return -EAGAIN rather than 0 if they expect more data (afs_extract_data() returns -EAGAIN to the delivery function already), and the caller is now responsible for producing an abort if that was the last packet. (6) There are many bits of unmarshalling code where: ret = afs_extract_data(call, skb, last, ...); switch (ret) { case 0: break; case -EAGAIN: return 0; default: return ret; } is to be found. As -EAGAIN can now be passed back to the caller, we now just return if ret < 0: ret = afs_extract_data(call, skb, last, ...); if (ret < 0) return ret; (7) Checks for trailing data and empty final data packets has been consolidated as afs_data_complete(). So: if (skb->len > 0) return -EBADMSG; if (!last) return 0; becomes: ret = afs_data_complete(call, skb, last); if (ret < 0) return ret; (8) afs_transfer_reply() now checks the amount of data it has against the amount of data desired and the amount of data in the skb and returns an error to induce an abort if we don't get exactly what we want. Without these changes, the following oops can occasionally be observed, particularly if some printks are inserted into the delivery path: general protection fault: 0000 [#1] SMP Modules linked in: kafs(E) af_rxrpc(E) [last unloaded: af_rxrpc] CPU: 0 PID: 1305 Comm: kworker/u8:3 Tainted: G E 4.7.0-fsdevel+ #1303 Hardware name: ASUS All Series/H97-PLUS, BIOS 2306 10/09/2014 Workqueue: kafsd afs_async_workfn [kafs] task: ffff88040be041c0 ti: ffff88040c070000 task.ti: ffff88040c070000 RIP: 0010:[<ffffffff8108fd3c>] [<ffffffff8108fd3c>] __lock_acquire+0xcf/0x15a1 RSP: 0018:ffff88040c073bc0 EFLAGS: 00010002 RAX: 6b6b6b6b6b6b6b6b RBX: 0000000000000000 RCX: ffff88040d29a710 RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffff88040d29a710 RBP: ffff88040c073c70 R08: 0000000000000001 R09: 0000000000000001 R10: 0000000000000001 R11: 0000000000000000 R12: 0000000000000000 R13: 0000000000000000 R14: ffff88040be041c0 R15: ffffffff814c928f FS: 0000000000000000(0000) GS:ffff88041fa00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fa4595f4750 CR3: 0000000001c14000 CR4: 00000000001406f0 Stack: 0000000000000006 000000000be04930 0000000000000000 ffff880400000000 ffff880400000000 ffffffff8108f847 ffff88040be041c0 ffffffff81050446 ffff8803fc08a920 ffff8803fc08a958 ffff88040be041c0 ffff88040c073c38 Call Trace: [<ffffffff8108f847>] ? mark_held_locks+0x5e/0x74 [<ffffffff81050446>] ? __local_bh_enable_ip+0x9b/0xa1 [<ffffffff8108f9ca>] ? trace_hardirqs_on_caller+0x16d/0x189 [<ffffffff810915f4>] lock_acquire+0x122/0x1b6 [<ffffffff810915f4>] ? lock_acquire+0x122/0x1b6 [<ffffffff814c928f>] ? skb_dequeue+0x18/0x61 [<ffffffff81609dbf>] _raw_spin_lock_irqsave+0x35/0x49 [<ffffffff814c928f>] ? skb_dequeue+0x18/0x61 [<ffffffff814c928f>] skb_dequeue+0x18/0x61 [<ffffffffa009aa92>] afs_deliver_to_call+0x344/0x39d [kafs] [<ffffffffa009ab37>] afs_process_async_call+0x4c/0xd5 [kafs] [<ffffffffa0099e9c>] afs_async_workfn+0xe/0x10 [kafs] [<ffffffff81063a3a>] process_one_work+0x29d/0x57c [<ffffffff81064ac2>] worker_thread+0x24a/0x385 [<ffffffff81064878>] ? rescuer_thread+0x2d0/0x2d0 [<ffffffff810696f5>] kthread+0xf3/0xfb [<ffffffff8160a6ff>] ret_from_fork+0x1f/0x40 [<ffffffff81069602>] ? kthread_create_on_node+0x1cf/0x1cf Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> diff 372ee163 Wed Aug 03 07:11:40 MDT 2016 David Howells <dhowells@redhat.com> rxrpc: Fix races between skb free, ACK generation and replying Inside the kafs filesystem it is possible to occasionally have a call processed and terminated before we've had a chance to check whether we need to clean up the rx queue for that call because afs_send_simple_reply() ends the call when it is done, but this is done in a workqueue item that might happen to run to completion before afs_deliver_to_call() completes. Further, it is possible for rxrpc_kernel_send_data() to be called to send a reply before the last request-phase data skb is released. The rxrpc skb destructor is where the ACK processing is done and the call state is advanced upon release of the last skb. ACK generation is also deferred to a work item because it's possible that the skb destructor is not called in a context where kernel_sendmsg() can be invoked. To this end, the following changes are made: (1) kernel_rxrpc_data_consumed() is added. This should be called whenever an skb is emptied so as to crank the ACK and call states. This does not release the skb, however. kernel_rxrpc_free_skb() must now be called to achieve that. These together replace rxrpc_kernel_data_delivered(). (2) kernel_rxrpc_data_consumed() is wrapped by afs_data_consumed(). This makes afs_deliver_to_call() easier to work as the skb can simply be discarded unconditionally here without trying to work out what the return value of the ->deliver() function means. The ->deliver() functions can, via afs_data_complete(), afs_transfer_reply() and afs_extract_data() mark that an skb has been consumed (thereby cranking the state) without the need to conditionally free the skb to make sure the state is correct on an incoming call for when the call processor tries to send the reply. (3) rxrpc_recvmsg() now has to call kernel_rxrpc_data_consumed() when it has finished with a packet and MSG_PEEK isn't set. (4) rxrpc_packet_destructor() no longer calls rxrpc_hard_ACK_data(). Because of this, we no longer need to clear the destructor and put the call before we free the skb in cases where we don't want the ACK/call state to be cranked. (5) The ->deliver() call-type callbacks are made to return -EAGAIN rather than 0 if they expect more data (afs_extract_data() returns -EAGAIN to the delivery function already), and the caller is now responsible for producing an abort if that was the last packet. (6) There are many bits of unmarshalling code where: ret = afs_extract_data(call, skb, last, ...); switch (ret) { case 0: break; case -EAGAIN: return 0; default: return ret; } is to be found. As -EAGAIN can now be passed back to the caller, we now just return if ret < 0: ret = afs_extract_data(call, skb, last, ...); if (ret < 0) return ret; (7) Checks for trailing data and empty final data packets has been consolidated as afs_data_complete(). So: if (skb->len > 0) return -EBADMSG; if (!last) return 0; becomes: ret = afs_data_complete(call, skb, last); if (ret < 0) return ret; (8) afs_transfer_reply() now checks the amount of data it has against the amount of data desired and the amount of data in the skb and returns an error to induce an abort if we don't get exactly what we want. Without these changes, the following oops can occasionally be observed, particularly if some printks are inserted into the delivery path: general protection fault: 0000 [#1] SMP Modules linked in: kafs(E) af_rxrpc(E) [last unloaded: af_rxrpc] CPU: 0 PID: 1305 Comm: kworker/u8:3 Tainted: G E 4.7.0-fsdevel+ #1303 Hardware name: ASUS All Series/H97-PLUS, BIOS 2306 10/09/2014 Workqueue: kafsd afs_async_workfn [kafs] task: ffff88040be041c0 ti: ffff88040c070000 task.ti: ffff88040c070000 RIP: 0010:[<ffffffff8108fd3c>] [<ffffffff8108fd3c>] __lock_acquire+0xcf/0x15a1 RSP: 0018:ffff88040c073bc0 EFLAGS: 00010002 RAX: 6b6b6b6b6b6b6b6b RBX: 0000000000000000 RCX: ffff88040d29a710 RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffff88040d29a710 RBP: ffff88040c073c70 R08: 0000000000000001 R09: 0000000000000001 R10: 0000000000000001 R11: 0000000000000000 R12: 0000000000000000 R13: 0000000000000000 R14: ffff88040be041c0 R15: ffffffff814c928f FS: 0000000000000000(0000) GS:ffff88041fa00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fa4595f4750 CR3: 0000000001c14000 CR4: 00000000001406f0 Stack: 0000000000000006 000000000be04930 0000000000000000 ffff880400000000 ffff880400000000 ffffffff8108f847 ffff88040be041c0 ffffffff81050446 ffff8803fc08a920 ffff8803fc08a958 ffff88040be041c0 ffff88040c073c38 Call Trace: [<ffffffff8108f847>] ? mark_held_locks+0x5e/0x74 [<ffffffff81050446>] ? __local_bh_enable_ip+0x9b/0xa1 [<ffffffff8108f9ca>] ? trace_hardirqs_on_caller+0x16d/0x189 [<ffffffff810915f4>] lock_acquire+0x122/0x1b6 [<ffffffff810915f4>] ? lock_acquire+0x122/0x1b6 [<ffffffff814c928f>] ? skb_dequeue+0x18/0x61 [<ffffffff81609dbf>] _raw_spin_lock_irqsave+0x35/0x49 [<ffffffff814c928f>] ? skb_dequeue+0x18/0x61 [<ffffffff814c928f>] skb_dequeue+0x18/0x61 [<ffffffffa009aa92>] afs_deliver_to_call+0x344/0x39d [kafs] [<ffffffffa009ab37>] afs_process_async_call+0x4c/0xd5 [kafs] [<ffffffffa0099e9c>] afs_async_workfn+0xe/0x10 [kafs] [<ffffffff81063a3a>] process_one_work+0x29d/0x57c [<ffffffff81064ac2>] worker_thread+0x24a/0x385 [<ffffffff81064878>] ? rescuer_thread+0x2d0/0x2d0 [<ffffffff810696f5>] kthread+0xf3/0xfb [<ffffffff8160a6ff>] ret_from_fork+0x1f/0x40 [<ffffffff81069602>] ? kthread_create_on_node+0x1cf/0x1cf Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> diff 372ee163 Wed Aug 03 07:11:40 MDT 2016 David Howells <dhowells@redhat.com> rxrpc: Fix races between skb free, ACK generation and replying Inside the kafs filesystem it is possible to occasionally have a call processed and terminated before we've had a chance to check whether we need to clean up the rx queue for that call because afs_send_simple_reply() ends the call when it is done, but this is done in a workqueue item that might happen to run to completion before afs_deliver_to_call() completes. Further, it is possible for rxrpc_kernel_send_data() to be called to send a reply before the last request-phase data skb is released. The rxrpc skb destructor is where the ACK processing is done and the call state is advanced upon release of the last skb. ACK generation is also deferred to a work item because it's possible that the skb destructor is not called in a context where kernel_sendmsg() can be invoked. To this end, the following changes are made: (1) kernel_rxrpc_data_consumed() is added. This should be called whenever an skb is emptied so as to crank the ACK and call states. This does not release the skb, however. kernel_rxrpc_free_skb() must now be called to achieve that. These together replace rxrpc_kernel_data_delivered(). (2) kernel_rxrpc_data_consumed() is wrapped by afs_data_consumed(). This makes afs_deliver_to_call() easier to work as the skb can simply be discarded unconditionally here without trying to work out what the return value of the ->deliver() function means. The ->deliver() functions can, via afs_data_complete(), afs_transfer_reply() and afs_extract_data() mark that an skb has been consumed (thereby cranking the state) without the need to conditionally free the skb to make sure the state is correct on an incoming call for when the call processor tries to send the reply. (3) rxrpc_recvmsg() now has to call kernel_rxrpc_data_consumed() when it has finished with a packet and MSG_PEEK isn't set. (4) rxrpc_packet_destructor() no longer calls rxrpc_hard_ACK_data(). Because of this, we no longer need to clear the destructor and put the call before we free the skb in cases where we don't want the ACK/call state to be cranked. (5) The ->deliver() call-type callbacks are made to return -EAGAIN rather than 0 if they expect more data (afs_extract_data() returns -EAGAIN to the delivery function already), and the caller is now responsible for producing an abort if that was the last packet. (6) There are many bits of unmarshalling code where: ret = afs_extract_data(call, skb, last, ...); switch (ret) { case 0: break; case -EAGAIN: return 0; default: return ret; } is to be found. As -EAGAIN can now be passed back to the caller, we now just return if ret < 0: ret = afs_extract_data(call, skb, last, ...); if (ret < 0) return ret; (7) Checks for trailing data and empty final data packets has been consolidated as afs_data_complete(). So: if (skb->len > 0) return -EBADMSG; if (!last) return 0; becomes: ret = afs_data_complete(call, skb, last); if (ret < 0) return ret; (8) afs_transfer_reply() now checks the amount of data it has against the amount of data desired and the amount of data in the skb and returns an error to induce an abort if we don't get exactly what we want. Without these changes, the following oops can occasionally be observed, particularly if some printks are inserted into the delivery path: general protection fault: 0000 [#1] SMP Modules linked in: kafs(E) af_rxrpc(E) [last unloaded: af_rxrpc] CPU: 0 PID: 1305 Comm: kworker/u8:3 Tainted: G E 4.7.0-fsdevel+ #1303 Hardware name: ASUS All Series/H97-PLUS, BIOS 2306 10/09/2014 Workqueue: kafsd afs_async_workfn [kafs] task: ffff88040be041c0 ti: ffff88040c070000 task.ti: ffff88040c070000 RIP: 0010:[<ffffffff8108fd3c>] [<ffffffff8108fd3c>] __lock_acquire+0xcf/0x15a1 RSP: 0018:ffff88040c073bc0 EFLAGS: 00010002 RAX: 6b6b6b6b6b6b6b6b RBX: 0000000000000000 RCX: ffff88040d29a710 RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffff88040d29a710 RBP: ffff88040c073c70 R08: 0000000000000001 R09: 0000000000000001 R10: 0000000000000001 R11: 0000000000000000 R12: 0000000000000000 R13: 0000000000000000 R14: ffff88040be041c0 R15: ffffffff814c928f FS: 0000000000000000(0000) GS:ffff88041fa00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fa4595f4750 CR3: 0000000001c14000 CR4: 00000000001406f0 Stack: 0000000000000006 000000000be04930 0000000000000000 ffff880400000000 ffff880400000000 ffffffff8108f847 ffff88040be041c0 ffffffff81050446 ffff8803fc08a920 ffff8803fc08a958 ffff88040be041c0 ffff88040c073c38 Call Trace: [<ffffffff8108f847>] ? mark_held_locks+0x5e/0x74 [<ffffffff81050446>] ? __local_bh_enable_ip+0x9b/0xa1 [<ffffffff8108f9ca>] ? trace_hardirqs_on_caller+0x16d/0x189 [<ffffffff810915f4>] lock_acquire+0x122/0x1b6 [<ffffffff810915f4>] ? lock_acquire+0x122/0x1b6 [<ffffffff814c928f>] ? skb_dequeue+0x18/0x61 [<ffffffff81609dbf>] _raw_spin_lock_irqsave+0x35/0x49 [<ffffffff814c928f>] ? skb_dequeue+0x18/0x61 [<ffffffff814c928f>] skb_dequeue+0x18/0x61 [<ffffffffa009aa92>] afs_deliver_to_call+0x344/0x39d [kafs] [<ffffffffa009ab37>] afs_process_async_call+0x4c/0xd5 [kafs] [<ffffffffa0099e9c>] afs_async_workfn+0xe/0x10 [kafs] [<ffffffff81063a3a>] process_one_work+0x29d/0x57c [<ffffffff81064ac2>] worker_thread+0x24a/0x385 [<ffffffff81064878>] ? rescuer_thread+0x2d0/0x2d0 [<ffffffff810696f5>] kthread+0xf3/0xfb [<ffffffff8160a6ff>] ret_from_fork+0x1f/0x40 [<ffffffff81069602>] ? kthread_create_on_node+0x1cf/0x1cf Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> diff 372ee163 Wed Aug 03 07:11:40 MDT 2016 David Howells <dhowells@redhat.com> rxrpc: Fix races between skb free, ACK generation and replying Inside the kafs filesystem it is possible to occasionally have a call processed and terminated before we've had a chance to check whether we need to clean up the rx queue for that call because afs_send_simple_reply() ends the call when it is done, but this is done in a workqueue item that might happen to run to completion before afs_deliver_to_call() completes. Further, it is possible for rxrpc_kernel_send_data() to be called to send a reply before the last request-phase data skb is released. The rxrpc skb destructor is where the ACK processing is done and the call state is advanced upon release of the last skb. ACK generation is also deferred to a work item because it's possible that the skb destructor is not called in a context where kernel_sendmsg() can be invoked. To this end, the following changes are made: (1) kernel_rxrpc_data_consumed() is added. This should be called whenever an skb is emptied so as to crank the ACK and call states. This does not release the skb, however. kernel_rxrpc_free_skb() must now be called to achieve that. These together replace rxrpc_kernel_data_delivered(). (2) kernel_rxrpc_data_consumed() is wrapped by afs_data_consumed(). This makes afs_deliver_to_call() easier to work as the skb can simply be discarded unconditionally here without trying to work out what the return value of the ->deliver() function means. The ->deliver() functions can, via afs_data_complete(), afs_transfer_reply() and afs_extract_data() mark that an skb has been consumed (thereby cranking the state) without the need to conditionally free the skb to make sure the state is correct on an incoming call for when the call processor tries to send the reply. (3) rxrpc_recvmsg() now has to call kernel_rxrpc_data_consumed() when it has finished with a packet and MSG_PEEK isn't set. (4) rxrpc_packet_destructor() no longer calls rxrpc_hard_ACK_data(). Because of this, we no longer need to clear the destructor and put the call before we free the skb in cases where we don't want the ACK/call state to be cranked. (5) The ->deliver() call-type callbacks are made to return -EAGAIN rather than 0 if they expect more data (afs_extract_data() returns -EAGAIN to the delivery function already), and the caller is now responsible for producing an abort if that was the last packet. (6) There are many bits of unmarshalling code where: ret = afs_extract_data(call, skb, last, ...); switch (ret) { case 0: break; case -EAGAIN: return 0; default: return ret; } is to be found. As -EAGAIN can now be passed back to the caller, we now just return if ret < 0: ret = afs_extract_data(call, skb, last, ...); if (ret < 0) return ret; (7) Checks for trailing data and empty final data packets has been consolidated as afs_data_complete(). So: if (skb->len > 0) return -EBADMSG; if (!last) return 0; becomes: ret = afs_data_complete(call, skb, last); if (ret < 0) return ret; (8) afs_transfer_reply() now checks the amount of data it has against the amount of data desired and the amount of data in the skb and returns an error to induce an abort if we don't get exactly what we want. Without these changes, the following oops can occasionally be observed, particularly if some printks are inserted into the delivery path: general protection fault: 0000 [#1] SMP Modules linked in: kafs(E) af_rxrpc(E) [last unloaded: af_rxrpc] CPU: 0 PID: 1305 Comm: kworker/u8:3 Tainted: G E 4.7.0-fsdevel+ #1303 Hardware name: ASUS All Series/H97-PLUS, BIOS 2306 10/09/2014 Workqueue: kafsd afs_async_workfn [kafs] task: ffff88040be041c0 ti: ffff88040c070000 task.ti: ffff88040c070000 RIP: 0010:[<ffffffff8108fd3c>] [<ffffffff8108fd3c>] __lock_acquire+0xcf/0x15a1 RSP: 0018:ffff88040c073bc0 EFLAGS: 00010002 RAX: 6b6b6b6b6b6b6b6b RBX: 0000000000000000 RCX: ffff88040d29a710 RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffff88040d29a710 RBP: ffff88040c073c70 R08: 0000000000000001 R09: 0000000000000001 R10: 0000000000000001 R11: 0000000000000000 R12: 0000000000000000 R13: 0000000000000000 R14: ffff88040be041c0 R15: ffffffff814c928f FS: 0000000000000000(0000) GS:ffff88041fa00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fa4595f4750 CR3: 0000000001c14000 CR4: 00000000001406f0 Stack: 0000000000000006 000000000be04930 0000000000000000 ffff880400000000 ffff880400000000 ffffffff8108f847 ffff88040be041c0 ffffffff81050446 ffff8803fc08a920 ffff8803fc08a958 ffff88040be041c0 ffff88040c073c38 Call Trace: [<ffffffff8108f847>] ? mark_held_locks+0x5e/0x74 [<ffffffff81050446>] ? __local_bh_enable_ip+0x9b/0xa1 [<ffffffff8108f9ca>] ? trace_hardirqs_on_caller+0x16d/0x189 [<ffffffff810915f4>] lock_acquire+0x122/0x1b6 [<ffffffff810915f4>] ? lock_acquire+0x122/0x1b6 [<ffffffff814c928f>] ? skb_dequeue+0x18/0x61 [<ffffffff81609dbf>] _raw_spin_lock_irqsave+0x35/0x49 [<ffffffff814c928f>] ? skb_dequeue+0x18/0x61 [<ffffffff814c928f>] skb_dequeue+0x18/0x61 [<ffffffffa009aa92>] afs_deliver_to_call+0x344/0x39d [kafs] [<ffffffffa009ab37>] afs_process_async_call+0x4c/0xd5 [kafs] [<ffffffffa0099e9c>] afs_async_workfn+0xe/0x10 [kafs] [<ffffffff81063a3a>] process_one_work+0x29d/0x57c [<ffffffff81064ac2>] worker_thread+0x24a/0x385 [<ffffffff81064878>] ? rescuer_thread+0x2d0/0x2d0 [<ffffffff810696f5>] kthread+0xf3/0xfb [<ffffffff8160a6ff>] ret_from_fork+0x1f/0x40 [<ffffffff81069602>] ? kthread_create_on_node+0x1cf/0x1cf Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> diff 372ee163 Wed Aug 03 07:11:40 MDT 2016 David Howells <dhowells@redhat.com> rxrpc: Fix races between skb free, ACK generation and replying Inside the kafs filesystem it is possible to occasionally have a call processed and terminated before we've had a chance to check whether we need to clean up the rx queue for that call because afs_send_simple_reply() ends the call when it is done, but this is done in a workqueue item that might happen to run to completion before afs_deliver_to_call() completes. Further, it is possible for rxrpc_kernel_send_data() to be called to send a reply before the last request-phase data skb is released. The rxrpc skb destructor is where the ACK processing is done and the call state is advanced upon release of the last skb. ACK generation is also deferred to a work item because it's possible that the skb destructor is not called in a context where kernel_sendmsg() can be invoked. To this end, the following changes are made: (1) kernel_rxrpc_data_consumed() is added. This should be called whenever an skb is emptied so as to crank the ACK and call states. This does not release the skb, however. kernel_rxrpc_free_skb() must now be called to achieve that. These together replace rxrpc_kernel_data_delivered(). (2) kernel_rxrpc_data_consumed() is wrapped by afs_data_consumed(). This makes afs_deliver_to_call() easier to work as the skb can simply be discarded unconditionally here without trying to work out what the return value of the ->deliver() function means. The ->deliver() functions can, via afs_data_complete(), afs_transfer_reply() and afs_extract_data() mark that an skb has been consumed (thereby cranking the state) without the need to conditionally free the skb to make sure the state is correct on an incoming call for when the call processor tries to send the reply. (3) rxrpc_recvmsg() now has to call kernel_rxrpc_data_consumed() when it has finished with a packet and MSG_PEEK isn't set. (4) rxrpc_packet_destructor() no longer calls rxrpc_hard_ACK_data(). Because of this, we no longer need to clear the destructor and put the call before we free the skb in cases where we don't want the ACK/call state to be cranked. (5) The ->deliver() call-type callbacks are made to return -EAGAIN rather than 0 if they expect more data (afs_extract_data() returns -EAGAIN to the delivery function already), and the caller is now responsible for producing an abort if that was the last packet. (6) There are many bits of unmarshalling code where: ret = afs_extract_data(call, skb, last, ...); switch (ret) { case 0: break; case -EAGAIN: return 0; default: return ret; } is to be found. As -EAGAIN can now be passed back to the caller, we now just return if ret < 0: ret = afs_extract_data(call, skb, last, ...); if (ret < 0) return ret; (7) Checks for trailing data and empty final data packets has been consolidated as afs_data_complete(). So: if (skb->len > 0) return -EBADMSG; if (!last) return 0; becomes: ret = afs_data_complete(call, skb, last); if (ret < 0) return ret; (8) afs_transfer_reply() now checks the amount of data it has against the amount of data desired and the amount of data in the skb and returns an error to induce an abort if we don't get exactly what we want. Without these changes, the following oops can occasionally be observed, particularly if some printks are inserted into the delivery path: general protection fault: 0000 [#1] SMP Modules linked in: kafs(E) af_rxrpc(E) [last unloaded: af_rxrpc] CPU: 0 PID: 1305 Comm: kworker/u8:3 Tainted: G E 4.7.0-fsdevel+ #1303 Hardware name: ASUS All Series/H97-PLUS, BIOS 2306 10/09/2014 Workqueue: kafsd afs_async_workfn [kafs] task: ffff88040be041c0 ti: ffff88040c070000 task.ti: ffff88040c070000 RIP: 0010:[<ffffffff8108fd3c>] [<ffffffff8108fd3c>] __lock_acquire+0xcf/0x15a1 RSP: 0018:ffff88040c073bc0 EFLAGS: 00010002 RAX: 6b6b6b6b6b6b6b6b RBX: 0000000000000000 RCX: ffff88040d29a710 RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffff88040d29a710 RBP: ffff88040c073c70 R08: 0000000000000001 R09: 0000000000000001 R10: 0000000000000001 R11: 0000000000000000 R12: 0000000000000000 R13: 0000000000000000 R14: ffff88040be041c0 R15: ffffffff814c928f FS: 0000000000000000(0000) GS:ffff88041fa00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fa4595f4750 CR3: 0000000001c14000 CR4: 00000000001406f0 Stack: 0000000000000006 000000000be04930 0000000000000000 ffff880400000000 ffff880400000000 ffffffff8108f847 ffff88040be041c0 ffffffff81050446 ffff8803fc08a920 ffff8803fc08a958 ffff88040be041c0 ffff88040c073c38 Call Trace: [<ffffffff8108f847>] ? mark_held_locks+0x5e/0x74 [<ffffffff81050446>] ? __local_bh_enable_ip+0x9b/0xa1 [<ffffffff8108f9ca>] ? trace_hardirqs_on_caller+0x16d/0x189 [<ffffffff810915f4>] lock_acquire+0x122/0x1b6 [<ffffffff810915f4>] ? lock_acquire+0x122/0x1b6 [<ffffffff814c928f>] ? skb_dequeue+0x18/0x61 [<ffffffff81609dbf>] _raw_spin_lock_irqsave+0x35/0x49 [<ffffffff814c928f>] ? skb_dequeue+0x18/0x61 [<ffffffff814c928f>] skb_dequeue+0x18/0x61 [<ffffffffa009aa92>] afs_deliver_to_call+0x344/0x39d [kafs] [<ffffffffa009ab37>] afs_process_async_call+0x4c/0xd5 [kafs] [<ffffffffa0099e9c>] afs_async_workfn+0xe/0x10 [kafs] [<ffffffff81063a3a>] process_one_work+0x29d/0x57c [<ffffffff81064ac2>] worker_thread+0x24a/0x385 [<ffffffff81064878>] ? rescuer_thread+0x2d0/0x2d0 [<ffffffff810696f5>] kthread+0xf3/0xfb [<ffffffff8160a6ff>] ret_from_fork+0x1f/0x40 [<ffffffff81069602>] ? kthread_create_on_node+0x1cf/0x1cf Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> diff 372ee163 Wed Aug 03 07:11:40 MDT 2016 David Howells <dhowells@redhat.com> rxrpc: Fix races between skb free, ACK generation and replying Inside the kafs filesystem it is possible to occasionally have a call processed and terminated before we've had a chance to check whether we need to clean up the rx queue for that call because afs_send_simple_reply() ends the call when it is done, but this is done in a workqueue item that might happen to run to completion before afs_deliver_to_call() completes. Further, it is possible for rxrpc_kernel_send_data() to be called to send a reply before the last request-phase data skb is released. The rxrpc skb destructor is where the ACK processing is done and the call state is advanced upon release of the last skb. ACK generation is also deferred to a work item because it's possible that the skb destructor is not called in a context where kernel_sendmsg() can be invoked. To this end, the following changes are made: (1) kernel_rxrpc_data_consumed() is added. This should be called whenever an skb is emptied so as to crank the ACK and call states. This does not release the skb, however. kernel_rxrpc_free_skb() must now be called to achieve that. These together replace rxrpc_kernel_data_delivered(). (2) kernel_rxrpc_data_consumed() is wrapped by afs_data_consumed(). This makes afs_deliver_to_call() easier to work as the skb can simply be discarded unconditionally here without trying to work out what the return value of the ->deliver() function means. The ->deliver() functions can, via afs_data_complete(), afs_transfer_reply() and afs_extract_data() mark that an skb has been consumed (thereby cranking the state) without the need to conditionally free the skb to make sure the state is correct on an incoming call for when the call processor tries to send the reply. (3) rxrpc_recvmsg() now has to call kernel_rxrpc_data_consumed() when it has finished with a packet and MSG_PEEK isn't set. (4) rxrpc_packet_destructor() no longer calls rxrpc_hard_ACK_data(). Because of this, we no longer need to clear the destructor and put the call before we free the skb in cases where we don't want the ACK/call state to be cranked. (5) The ->deliver() call-type callbacks are made to return -EAGAIN rather than 0 if they expect more data (afs_extract_data() returns -EAGAIN to the delivery function already), and the caller is now responsible for producing an abort if that was the last packet. (6) There are many bits of unmarshalling code where: ret = afs_extract_data(call, skb, last, ...); switch (ret) { case 0: break; case -EAGAIN: return 0; default: return ret; } is to be found. As -EAGAIN can now be passed back to the caller, we now just return if ret < 0: ret = afs_extract_data(call, skb, last, ...); if (ret < 0) return ret; (7) Checks for trailing data and empty final data packets has been consolidated as afs_data_complete(). So: if (skb->len > 0) return -EBADMSG; if (!last) return 0; becomes: ret = afs_data_complete(call, skb, last); if (ret < 0) return ret; (8) afs_transfer_reply() now checks the amount of data it has against the amount of data desired and the amount of data in the skb and returns an error to induce an abort if we don't get exactly what we want. Without these changes, the following oops can occasionally be observed, particularly if some printks are inserted into the delivery path: general protection fault: 0000 [#1] SMP Modules linked in: kafs(E) af_rxrpc(E) [last unloaded: af_rxrpc] CPU: 0 PID: 1305 Comm: kworker/u8:3 Tainted: G E 4.7.0-fsdevel+ #1303 Hardware name: ASUS All Series/H97-PLUS, BIOS 2306 10/09/2014 Workqueue: kafsd afs_async_workfn [kafs] task: ffff88040be041c0 ti: ffff88040c070000 task.ti: ffff88040c070000 RIP: 0010:[<ffffffff8108fd3c>] [<ffffffff8108fd3c>] __lock_acquire+0xcf/0x15a1 RSP: 0018:ffff88040c073bc0 EFLAGS: 00010002 RAX: 6b6b6b6b6b6b6b6b RBX: 0000000000000000 RCX: ffff88040d29a710 RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffff88040d29a710 RBP: ffff88040c073c70 R08: 0000000000000001 R09: 0000000000000001 R10: 0000000000000001 R11: 0000000000000000 R12: 0000000000000000 R13: 0000000000000000 R14: ffff88040be041c0 R15: ffffffff814c928f FS: 0000000000000000(0000) GS:ffff88041fa00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fa4595f4750 CR3: 0000000001c14000 CR4: 00000000001406f0 Stack: 0000000000000006 000000000be04930 0000000000000000 ffff880400000000 ffff880400000000 ffffffff8108f847 ffff88040be041c0 ffffffff81050446 ffff8803fc08a920 ffff8803fc08a958 ffff88040be041c0 ffff88040c073c38 Call Trace: [<ffffffff8108f847>] ? mark_held_locks+0x5e/0x74 [<ffffffff81050446>] ? __local_bh_enable_ip+0x9b/0xa1 [<ffffffff8108f9ca>] ? trace_hardirqs_on_caller+0x16d/0x189 [<ffffffff810915f4>] lock_acquire+0x122/0x1b6 [<ffffffff810915f4>] ? lock_acquire+0x122/0x1b6 [<ffffffff814c928f>] ? skb_dequeue+0x18/0x61 [<ffffffff81609dbf>] _raw_spin_lock_irqsave+0x35/0x49 [<ffffffff814c928f>] ? skb_dequeue+0x18/0x61 [<ffffffff814c928f>] skb_dequeue+0x18/0x61 [<ffffffffa009aa92>] afs_deliver_to_call+0x344/0x39d [kafs] [<ffffffffa009ab37>] afs_process_async_call+0x4c/0xd5 [kafs] [<ffffffffa0099e9c>] afs_async_workfn+0xe/0x10 [kafs] [<ffffffff81063a3a>] process_one_work+0x29d/0x57c [<ffffffff81064ac2>] worker_thread+0x24a/0x385 [<ffffffff81064878>] ? rescuer_thread+0x2d0/0x2d0 [<ffffffff810696f5>] kthread+0xf3/0xfb [<ffffffff8160a6ff>] ret_from_fork+0x1f/0x40 [<ffffffff81069602>] ? kthread_create_on_node+0x1cf/0x1cf Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> diff 372ee163 Wed Aug 03 07:11:40 MDT 2016 David Howells <dhowells@redhat.com> rxrpc: Fix races between skb free, ACK generation and replying Inside the kafs filesystem it is possible to occasionally have a call processed and terminated before we've had a chance to check whether we need to clean up the rx queue for that call because afs_send_simple_reply() ends the call when it is done, but this is done in a workqueue item that might happen to run to completion before afs_deliver_to_call() completes. Further, it is possible for rxrpc_kernel_send_data() to be called to send a reply before the last request-phase data skb is released. The rxrpc skb destructor is where the ACK processing is done and the call state is advanced upon release of the last skb. ACK generation is also deferred to a work item because it's possible that the skb destructor is not called in a context where kernel_sendmsg() can be invoked. To this end, the following changes are made: (1) kernel_rxrpc_data_consumed() is added. This should be called whenever an skb is emptied so as to crank the ACK and call states. This does not release the skb, however. kernel_rxrpc_free_skb() must now be called to achieve that. These together replace rxrpc_kernel_data_delivered(). (2) kernel_rxrpc_data_consumed() is wrapped by afs_data_consumed(). This makes afs_deliver_to_call() easier to work as the skb can simply be discarded unconditionally here without trying to work out what the return value of the ->deliver() function means. The ->deliver() functions can, via afs_data_complete(), afs_transfer_reply() and afs_extract_data() mark that an skb has been consumed (thereby cranking the state) without the need to conditionally free the skb to make sure the state is correct on an incoming call for when the call processor tries to send the reply. (3) rxrpc_recvmsg() now has to call kernel_rxrpc_data_consumed() when it has finished with a packet and MSG_PEEK isn't set. (4) rxrpc_packet_destructor() no longer calls rxrpc_hard_ACK_data(). Because of this, we no longer need to clear the destructor and put the call before we free the skb in cases where we don't want the ACK/call state to be cranked. (5) The ->deliver() call-type callbacks are made to return -EAGAIN rather than 0 if they expect more data (afs_extract_data() returns -EAGAIN to the delivery function already), and the caller is now responsible for producing an abort if that was the last packet. (6) There are many bits of unmarshalling code where: ret = afs_extract_data(call, skb, last, ...); switch (ret) { case 0: break; case -EAGAIN: return 0; default: return ret; } is to be found. As -EAGAIN can now be passed back to the caller, we now just return if ret < 0: ret = afs_extract_data(call, skb, last, ...); if (ret < 0) return ret; (7) Checks for trailing data and empty final data packets has been consolidated as afs_data_complete(). So: if (skb->len > 0) return -EBADMSG; if (!last) return 0; becomes: ret = afs_data_complete(call, skb, last); if (ret < 0) return ret; (8) afs_transfer_reply() now checks the amount of data it has against the amount of data desired and the amount of data in the skb and returns an error to induce an abort if we don't get exactly what we want. Without these changes, the following oops can occasionally be observed, particularly if some printks are inserted into the delivery path: general protection fault: 0000 [#1] SMP Modules linked in: kafs(E) af_rxrpc(E) [last unloaded: af_rxrpc] CPU: 0 PID: 1305 Comm: kworker/u8:3 Tainted: G E 4.7.0-fsdevel+ #1303 Hardware name: ASUS All Series/H97-PLUS, BIOS 2306 10/09/2014 Workqueue: kafsd afs_async_workfn [kafs] task: ffff88040be041c0 ti: ffff88040c070000 task.ti: ffff88040c070000 RIP: 0010:[<ffffffff8108fd3c>] [<ffffffff8108fd3c>] __lock_acquire+0xcf/0x15a1 RSP: 0018:ffff88040c073bc0 EFLAGS: 00010002 RAX: 6b6b6b6b6b6b6b6b RBX: 0000000000000000 RCX: ffff88040d29a710 RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffff88040d29a710 RBP: ffff88040c073c70 R08: 0000000000000001 R09: 0000000000000001 R10: 0000000000000001 R11: 0000000000000000 R12: 0000000000000000 R13: 0000000000000000 R14: ffff88040be041c0 R15: ffffffff814c928f FS: 0000000000000000(0000) GS:ffff88041fa00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fa4595f4750 CR3: 0000000001c14000 CR4: 00000000001406f0 Stack: 0000000000000006 000000000be04930 0000000000000000 ffff880400000000 ffff880400000000 ffffffff8108f847 ffff88040be041c0 ffffffff81050446 ffff8803fc08a920 ffff8803fc08a958 ffff88040be041c0 ffff88040c073c38 Call Trace: [<ffffffff8108f847>] ? mark_held_locks+0x5e/0x74 [<ffffffff81050446>] ? __local_bh_enable_ip+0x9b/0xa1 [<ffffffff8108f9ca>] ? trace_hardirqs_on_caller+0x16d/0x189 [<ffffffff810915f4>] lock_acquire+0x122/0x1b6 [<ffffffff810915f4>] ? lock_acquire+0x122/0x1b6 [<ffffffff814c928f>] ? skb_dequeue+0x18/0x61 [<ffffffff81609dbf>] _raw_spin_lock_irqsave+0x35/0x49 [<ffffffff814c928f>] ? skb_dequeue+0x18/0x61 [<ffffffff814c928f>] skb_dequeue+0x18/0x61 [<ffffffffa009aa92>] afs_deliver_to_call+0x344/0x39d [kafs] [<ffffffffa009ab37>] afs_process_async_call+0x4c/0xd5 [kafs] [<ffffffffa0099e9c>] afs_async_workfn+0xe/0x10 [kafs] [<ffffffff81063a3a>] process_one_work+0x29d/0x57c [<ffffffff81064ac2>] worker_thread+0x24a/0x385 [<ffffffff81064878>] ? rescuer_thread+0x2d0/0x2d0 [<ffffffff810696f5>] kthread+0xf3/0xfb [<ffffffff8160a6ff>] ret_from_fork+0x1f/0x40 [<ffffffff81069602>] ? kthread_create_on_node+0x1cf/0x1cf Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> diff 372ee163 Wed Aug 03 07:11:40 MDT 2016 David Howells <dhowells@redhat.com> rxrpc: Fix races between skb free, ACK generation and replying Inside the kafs filesystem it is possible to occasionally have a call processed and terminated before we've had a chance to check whether we need to clean up the rx queue for that call because afs_send_simple_reply() ends the call when it is done, but this is done in a workqueue item that might happen to run to completion before afs_deliver_to_call() completes. Further, it is possible for rxrpc_kernel_send_data() to be called to send a reply before the last request-phase data skb is released. The rxrpc skb destructor is where the ACK processing is done and the call state is advanced upon release of the last skb. ACK generation is also deferred to a work item because it's possible that the skb destructor is not called in a context where kernel_sendmsg() can be invoked. To this end, the following changes are made: (1) kernel_rxrpc_data_consumed() is added. This should be called whenever an skb is emptied so as to crank the ACK and call states. This does not release the skb, however. kernel_rxrpc_free_skb() must now be called to achieve that. These together replace rxrpc_kernel_data_delivered(). (2) kernel_rxrpc_data_consumed() is wrapped by afs_data_consumed(). This makes afs_deliver_to_call() easier to work as the skb can simply be discarded unconditionally here without trying to work out what the return value of the ->deliver() function means. The ->deliver() functions can, via afs_data_complete(), afs_transfer_reply() and afs_extract_data() mark that an skb has been consumed (thereby cranking the state) without the need to conditionally free the skb to make sure the state is correct on an incoming call for when the call processor tries to send the reply. (3) rxrpc_recvmsg() now has to call kernel_rxrpc_data_consumed() when it has finished with a packet and MSG_PEEK isn't set. (4) rxrpc_packet_destructor() no longer calls rxrpc_hard_ACK_data(). Because of this, we no longer need to clear the destructor and put the call before we free the skb in cases where we don't want the ACK/call state to be cranked. (5) The ->deliver() call-type callbacks are made to return -EAGAIN rather than 0 if they expect more data (afs_extract_data() returns -EAGAIN to the delivery function already), and the caller is now responsible for producing an abort if that was the last packet. (6) There are many bits of unmarshalling code where: ret = afs_extract_data(call, skb, last, ...); switch (ret) { case 0: break; case -EAGAIN: return 0; default: return ret; } is to be found. As -EAGAIN can now be passed back to the caller, we now just return if ret < 0: ret = afs_extract_data(call, skb, last, ...); if (ret < 0) return ret; (7) Checks for trailing data and empty final data packets has been consolidated as afs_data_complete(). So: if (skb->len > 0) return -EBADMSG; if (!last) return 0; becomes: ret = afs_data_complete(call, skb, last); if (ret < 0) return ret; (8) afs_transfer_reply() now checks the amount of data it has against the amount of data desired and the amount of data in the skb and returns an error to induce an abort if we don't get exactly what we want. Without these changes, the following oops can occasionally be observed, particularly if some printks are inserted into the delivery path: general protection fault: 0000 [#1] SMP Modules linked in: kafs(E) af_rxrpc(E) [last unloaded: af_rxrpc] CPU: 0 PID: 1305 Comm: kworker/u8:3 Tainted: G E 4.7.0-fsdevel+ #1303 Hardware name: ASUS All Series/H97-PLUS, BIOS 2306 10/09/2014 Workqueue: kafsd afs_async_workfn [kafs] task: ffff88040be041c0 ti: ffff88040c070000 task.ti: ffff88040c070000 RIP: 0010:[<ffffffff8108fd3c>] [<ffffffff8108fd3c>] __lock_acquire+0xcf/0x15a1 RSP: 0018:ffff88040c073bc0 EFLAGS: 00010002 RAX: 6b6b6b6b6b6b6b6b RBX: 0000000000000000 RCX: ffff88040d29a710 RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffff88040d29a710 RBP: ffff88040c073c70 R08: 0000000000000001 R09: 0000000000000001 R10: 0000000000000001 R11: 0000000000000000 R12: 0000000000000000 R13: 0000000000000000 R14: ffff88040be041c0 R15: ffffffff814c928f FS: 0000000000000000(0000) GS:ffff88041fa00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fa4595f4750 CR3: 0000000001c14000 CR4: 00000000001406f0 Stack: 0000000000000006 000000000be04930 0000000000000000 ffff880400000000 ffff880400000000 ffffffff8108f847 ffff88040be041c0 ffffffff81050446 ffff8803fc08a920 ffff8803fc08a958 ffff88040be041c0 ffff88040c073c38 Call Trace: [<ffffffff8108f847>] ? mark_held_locks+0x5e/0x74 [<ffffffff81050446>] ? __local_bh_enable_ip+0x9b/0xa1 [<ffffffff8108f9ca>] ? trace_hardirqs_on_caller+0x16d/0x189 [<ffffffff810915f4>] lock_acquire+0x122/0x1b6 [<ffffffff810915f4>] ? lock_acquire+0x122/0x1b6 [<ffffffff814c928f>] ? skb_dequeue+0x18/0x61 [<ffffffff81609dbf>] _raw_spin_lock_irqsave+0x35/0x49 [<ffffffff814c928f>] ? skb_dequeue+0x18/0x61 [<ffffffff814c928f>] skb_dequeue+0x18/0x61 [<ffffffffa009aa92>] afs_deliver_to_call+0x344/0x39d [kafs] [<ffffffffa009ab37>] afs_process_async_call+0x4c/0xd5 [kafs] [<ffffffffa0099e9c>] afs_async_workfn+0xe/0x10 [kafs] [<ffffffff81063a3a>] process_one_work+0x29d/0x57c [<ffffffff81064ac2>] worker_thread+0x24a/0x385 [<ffffffff81064878>] ? rescuer_thread+0x2d0/0x2d0 [<ffffffff810696f5>] kthread+0xf3/0xfb [<ffffffff8160a6ff>] ret_from_fork+0x1f/0x40 [<ffffffff81069602>] ? kthread_create_on_node+0x1cf/0x1cf Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> diff 372ee163 Wed Aug 03 07:11:40 MDT 2016 David Howells <dhowells@redhat.com> rxrpc: Fix races between skb free, ACK generation and replying Inside the kafs filesystem it is possible to occasionally have a call processed and terminated before we've had a chance to check whether we need to clean up the rx queue for that call because afs_send_simple_reply() ends the call when it is done, but this is done in a workqueue item that might happen to run to completion before afs_deliver_to_call() completes. Further, it is possible for rxrpc_kernel_send_data() to be called to send a reply before the last request-phase data skb is released. The rxrpc skb destructor is where the ACK processing is done and the call state is advanced upon release of the last skb. ACK generation is also deferred to a work item because it's possible that the skb destructor is not called in a context where kernel_sendmsg() can be invoked. To this end, the following changes are made: (1) kernel_rxrpc_data_consumed() is added. This should be called whenever an skb is emptied so as to crank the ACK and call states. This does not release the skb, however. kernel_rxrpc_free_skb() must now be called to achieve that. These together replace rxrpc_kernel_data_delivered(). (2) kernel_rxrpc_data_consumed() is wrapped by afs_data_consumed(). This makes afs_deliver_to_call() easier to work as the skb can simply be discarded unconditionally here without trying to work out what the return value of the ->deliver() function means. The ->deliver() functions can, via afs_data_complete(), afs_transfer_reply() and afs_extract_data() mark that an skb has been consumed (thereby cranking the state) without the need to conditionally free the skb to make sure the state is correct on an incoming call for when the call processor tries to send the reply. (3) rxrpc_recvmsg() now has to call kernel_rxrpc_data_consumed() when it has finished with a packet and MSG_PEEK isn't set. (4) rxrpc_packet_destructor() no longer calls rxrpc_hard_ACK_data(). Because of this, we no longer need to clear the destructor and put the call before we free the skb in cases where we don't want the ACK/call state to be cranked. (5) The ->deliver() call-type callbacks are made to return -EAGAIN rather than 0 if they expect more data (afs_extract_data() returns -EAGAIN to the delivery function already), and the caller is now responsible for producing an abort if that was the last packet. (6) There are many bits of unmarshalling code where: ret = afs_extract_data(call, skb, last, ...); switch (ret) { case 0: break; case -EAGAIN: return 0; default: return ret; } is to be found. As -EAGAIN can now be passed back to the caller, we now just return if ret < 0: ret = afs_extract_data(call, skb, last, ...); if (ret < 0) return ret; (7) Checks for trailing data and empty final data packets has been consolidated as afs_data_complete(). So: if (skb->len > 0) return -EBADMSG; if (!last) return 0; becomes: ret = afs_data_complete(call, skb, last); if (ret < 0) return ret; (8) afs_transfer_reply() now checks the amount of data it has against the amount of data desired and the amount of data in the skb and returns an error to induce an abort if we don't get exactly what we want. Without these changes, the following oops can occasionally be observed, particularly if some printks are inserted into the delivery path: general protection fault: 0000 [#1] SMP Modules linked in: kafs(E) af_rxrpc(E) [last unloaded: af_rxrpc] CPU: 0 PID: 1305 Comm: kworker/u8:3 Tainted: G E 4.7.0-fsdevel+ #1303 Hardware name: ASUS All Series/H97-PLUS, BIOS 2306 10/09/2014 Workqueue: kafsd afs_async_workfn [kafs] task: ffff88040be041c0 ti: ffff88040c070000 task.ti: ffff88040c070000 RIP: 0010:[<ffffffff8108fd3c>] [<ffffffff8108fd3c>] __lock_acquire+0xcf/0x15a1 RSP: 0018:ffff88040c073bc0 EFLAGS: 00010002 RAX: 6b6b6b6b6b6b6b6b RBX: 0000000000000000 RCX: ffff88040d29a710 RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffff88040d29a710 RBP: ffff88040c073c70 R08: 0000000000000001 R09: 0000000000000001 R10: 0000000000000001 R11: 0000000000000000 R12: 0000000000000000 R13: 0000000000000000 R14: ffff88040be041c0 R15: ffffffff814c928f FS: 0000000000000000(0000) GS:ffff88041fa00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fa4595f4750 CR3: 0000000001c14000 CR4: 00000000001406f0 Stack: 0000000000000006 000000000be04930 0000000000000000 ffff880400000000 ffff880400000000 ffffffff8108f847 ffff88040be041c0 ffffffff81050446 ffff8803fc08a920 ffff8803fc08a958 ffff88040be041c0 ffff88040c073c38 Call Trace: [<ffffffff8108f847>] ? mark_held_locks+0x5e/0x74 [<ffffffff81050446>] ? __local_bh_enable_ip+0x9b/0xa1 [<ffffffff8108f9ca>] ? trace_hardirqs_on_caller+0x16d/0x189 [<ffffffff810915f4>] lock_acquire+0x122/0x1b6 [<ffffffff810915f4>] ? lock_acquire+0x122/0x1b6 [<ffffffff814c928f>] ? skb_dequeue+0x18/0x61 [<ffffffff81609dbf>] _raw_spin_lock_irqsave+0x35/0x49 [<ffffffff814c928f>] ? skb_dequeue+0x18/0x61 [<ffffffff814c928f>] skb_dequeue+0x18/0x61 [<ffffffffa009aa92>] afs_deliver_to_call+0x344/0x39d [kafs] [<ffffffffa009ab37>] afs_process_async_call+0x4c/0xd5 [kafs] [<ffffffffa0099e9c>] afs_async_workfn+0xe/0x10 [kafs] [<ffffffff81063a3a>] process_one_work+0x29d/0x57c [<ffffffff81064ac2>] worker_thread+0x24a/0x385 [<ffffffff81064878>] ? rescuer_thread+0x2d0/0x2d0 [<ffffffff810696f5>] kthread+0xf3/0xfb [<ffffffff8160a6ff>] ret_from_fork+0x1f/0x40 [<ffffffff81069602>] ? kthread_create_on_node+0x1cf/0x1cf Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> diff 372ee163 Wed Aug 03 07:11:40 MDT 2016 David Howells <dhowells@redhat.com> rxrpc: Fix races between skb free, ACK generation and replying Inside the kafs filesystem it is possible to occasionally have a call processed and terminated before we've had a chance to check whether we need to clean up the rx queue for that call because afs_send_simple_reply() ends the call when it is done, but this is done in a workqueue item that might happen to run to completion before afs_deliver_to_call() completes. Further, it is possible for rxrpc_kernel_send_data() to be called to send a reply before the last request-phase data skb is released. The rxrpc skb destructor is where the ACK processing is done and the call state is advanced upon release of the last skb. ACK generation is also deferred to a work item because it's possible that the skb destructor is not called in a context where kernel_sendmsg() can be invoked. To this end, the following changes are made: (1) kernel_rxrpc_data_consumed() is added. This should be called whenever an skb is emptied so as to crank the ACK and call states. This does not release the skb, however. kernel_rxrpc_free_skb() must now be called to achieve that. These together replace rxrpc_kernel_data_delivered(). (2) kernel_rxrpc_data_consumed() is wrapped by afs_data_consumed(). This makes afs_deliver_to_call() easier to work as the skb can simply be discarded unconditionally here without trying to work out what the return value of the ->deliver() function means. The ->deliver() functions can, via afs_data_complete(), afs_transfer_reply() and afs_extract_data() mark that an skb has been consumed (thereby cranking the state) without the need to conditionally free the skb to make sure the state is correct on an incoming call for when the call processor tries to send the reply. (3) rxrpc_recvmsg() now has to call kernel_rxrpc_data_consumed() when it has finished with a packet and MSG_PEEK isn't set. (4) rxrpc_packet_destructor() no longer calls rxrpc_hard_ACK_data(). Because of this, we no longer need to clear the destructor and put the call before we free the skb in cases where we don't want the ACK/call state to be cranked. (5) The ->deliver() call-type callbacks are made to return -EAGAIN rather than 0 if they expect more data (afs_extract_data() returns -EAGAIN to the delivery function already), and the caller is now responsible for producing an abort if that was the last packet. (6) There are many bits of unmarshalling code where: ret = afs_extract_data(call, skb, last, ...); switch (ret) { case 0: break; case -EAGAIN: return 0; default: return ret; } is to be found. As -EAGAIN can now be passed back to the caller, we now just return if ret < 0: ret = afs_extract_data(call, skb, last, ...); if (ret < 0) return ret; (7) Checks for trailing data and empty final data packets has been consolidated as afs_data_complete(). So: if (skb->len > 0) return -EBADMSG; if (!last) return 0; becomes: ret = afs_data_complete(call, skb, last); if (ret < 0) return ret; (8) afs_transfer_reply() now checks the amount of data it has against the amount of data desired and the amount of data in the skb and returns an error to induce an abort if we don't get exactly what we want. Without these changes, the following oops can occasionally be observed, particularly if some printks are inserted into the delivery path: general protection fault: 0000 [#1] SMP Modules linked in: kafs(E) af_rxrpc(E) [last unloaded: af_rxrpc] CPU: 0 PID: 1305 Comm: kworker/u8:3 Tainted: G E 4.7.0-fsdevel+ #1303 Hardware name: ASUS All Series/H97-PLUS, BIOS 2306 10/09/2014 Workqueue: kafsd afs_async_workfn [kafs] task: ffff88040be041c0 ti: ffff88040c070000 task.ti: ffff88040c070000 RIP: 0010:[<ffffffff8108fd3c>] [<ffffffff8108fd3c>] __lock_acquire+0xcf/0x15a1 RSP: 0018:ffff88040c073bc0 EFLAGS: 00010002 RAX: 6b6b6b6b6b6b6b6b RBX: 0000000000000000 RCX: ffff88040d29a710 RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffff88040d29a710 RBP: ffff88040c073c70 R08: 0000000000000001 R09: 0000000000000001 R10: 0000000000000001 R11: 0000000000000000 R12: 0000000000000000 R13: 0000000000000000 R14: ffff88040be041c0 R15: ffffffff814c928f FS: 0000000000000000(0000) GS:ffff88041fa00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fa4595f4750 CR3: 0000000001c14000 CR4: 00000000001406f0 Stack: 0000000000000006 000000000be04930 0000000000000000 ffff880400000000 ffff880400000000 ffffffff8108f847 ffff88040be041c0 ffffffff81050446 ffff8803fc08a920 ffff8803fc08a958 ffff88040be041c0 ffff88040c073c38 Call Trace: [<ffffffff8108f847>] ? mark_held_locks+0x5e/0x74 [<ffffffff81050446>] ? __local_bh_enable_ip+0x9b/0xa1 [<ffffffff8108f9ca>] ? trace_hardirqs_on_caller+0x16d/0x189 [<ffffffff810915f4>] lock_acquire+0x122/0x1b6 [<ffffffff810915f4>] ? lock_acquire+0x122/0x1b6 [<ffffffff814c928f>] ? skb_dequeue+0x18/0x61 [<ffffffff81609dbf>] _raw_spin_lock_irqsave+0x35/0x49 [<ffffffff814c928f>] ? skb_dequeue+0x18/0x61 [<ffffffff814c928f>] skb_dequeue+0x18/0x61 [<ffffffffa009aa92>] afs_deliver_to_call+0x344/0x39d [kafs] [<ffffffffa009ab37>] afs_process_async_call+0x4c/0xd5 [kafs] [<ffffffffa0099e9c>] afs_async_workfn+0xe/0x10 [kafs] [<ffffffff81063a3a>] process_one_work+0x29d/0x57c [<ffffffff81064ac2>] worker_thread+0x24a/0x385 [<ffffffff81064878>] ? rescuer_thread+0x2d0/0x2d0 [<ffffffff810696f5>] kthread+0xf3/0xfb [<ffffffff8160a6ff>] ret_from_fork+0x1f/0x40 [<ffffffff81069602>] ? kthread_create_on_node+0x1cf/0x1cf Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> diff 372ee163 Wed Aug 03 07:11:40 MDT 2016 David Howells <dhowells@redhat.com> rxrpc: Fix races between skb free, ACK generation and replying Inside the kafs filesystem it is possible to occasionally have a call processed and terminated before we've had a chance to check whether we need to clean up the rx queue for that call because afs_send_simple_reply() ends the call when it is done, but this is done in a workqueue item that might happen to run to completion before afs_deliver_to_call() completes. Further, it is possible for rxrpc_kernel_send_data() to be called to send a reply before the last request-phase data skb is released. The rxrpc skb destructor is where the ACK processing is done and the call state is advanced upon release of the last skb. ACK generation is also deferred to a work item because it's possible that the skb destructor is not called in a context where kernel_sendmsg() can be invoked. To this end, the following changes are made: (1) kernel_rxrpc_data_consumed() is added. This should be called whenever an skb is emptied so as to crank the ACK and call states. This does not release the skb, however. kernel_rxrpc_free_skb() must now be called to achieve that. These together replace rxrpc_kernel_data_delivered(). (2) kernel_rxrpc_data_consumed() is wrapped by afs_data_consumed(). This makes afs_deliver_to_call() easier to work as the skb can simply be discarded unconditionally here without trying to work out what the return value of the ->deliver() function means. The ->deliver() functions can, via afs_data_complete(), afs_transfer_reply() and afs_extract_data() mark that an skb has been consumed (thereby cranking the state) without the need to conditionally free the skb to make sure the state is correct on an incoming call for when the call processor tries to send the reply. (3) rxrpc_recvmsg() now has to call kernel_rxrpc_data_consumed() when it has finished with a packet and MSG_PEEK isn't set. (4) rxrpc_packet_destructor() no longer calls rxrpc_hard_ACK_data(). Because of this, we no longer need to clear the destructor and put the call before we free the skb in cases where we don't want the ACK/call state to be cranked. (5) The ->deliver() call-type callbacks are made to return -EAGAIN rather than 0 if they expect more data (afs_extract_data() returns -EAGAIN to the delivery function already), and the caller is now responsible for producing an abort if that was the last packet. (6) There are many bits of unmarshalling code where: ret = afs_extract_data(call, skb, last, ...); switch (ret) { case 0: break; case -EAGAIN: return 0; default: return ret; } is to be found. As -EAGAIN can now be passed back to the caller, we now just return if ret < 0: ret = afs_extract_data(call, skb, last, ...); if (ret < 0) return ret; (7) Checks for trailing data and empty final data packets has been consolidated as afs_data_complete(). So: if (skb->len > 0) return -EBADMSG; if (!last) return 0; becomes: ret = afs_data_complete(call, skb, last); if (ret < 0) return ret; (8) afs_transfer_reply() now checks the amount of data it has against the amount of data desired and the amount of data in the skb and returns an error to induce an abort if we don't get exactly what we want. Without these changes, the following oops can occasionally be observed, particularly if some printks are inserted into the delivery path: general protection fault: 0000 [#1] SMP Modules linked in: kafs(E) af_rxrpc(E) [last unloaded: af_rxrpc] CPU: 0 PID: 1305 Comm: kworker/u8:3 Tainted: G E 4.7.0-fsdevel+ #1303 Hardware name: ASUS All Series/H97-PLUS, BIOS 2306 10/09/2014 Workqueue: kafsd afs_async_workfn [kafs] task: ffff88040be041c0 ti: ffff88040c070000 task.ti: ffff88040c070000 RIP: 0010:[<ffffffff8108fd3c>] [<ffffffff8108fd3c>] __lock_acquire+0xcf/0x15a1 RSP: 0018:ffff88040c073bc0 EFLAGS: 00010002 RAX: 6b6b6b6b6b6b6b6b RBX: 0000000000000000 RCX: ffff88040d29a710 RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffff88040d29a710 RBP: ffff88040c073c70 R08: 0000000000000001 R09: 0000000000000001 R10: 0000000000000001 R11: 0000000000000000 R12: 0000000000000000 R13: 0000000000000000 R14: ffff88040be041c0 R15: ffffffff814c928f FS: 0000000000000000(0000) GS:ffff88041fa00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fa4595f4750 CR3: 0000000001c14000 CR4: 00000000001406f0 Stack: 0000000000000006 000000000be04930 0000000000000000 ffff880400000000 ffff880400000000 ffffffff8108f847 ffff88040be041c0 ffffffff81050446 ffff8803fc08a920 ffff8803fc08a958 ffff88040be041c0 ffff88040c073c38 Call Trace: [<ffffffff8108f847>] ? mark_held_locks+0x5e/0x74 [<ffffffff81050446>] ? __local_bh_enable_ip+0x9b/0xa1 [<ffffffff8108f9ca>] ? trace_hardirqs_on_caller+0x16d/0x189 [<ffffffff810915f4>] lock_acquire+0x122/0x1b6 [<ffffffff810915f4>] ? lock_acquire+0x122/0x1b6 [<ffffffff814c928f>] ? skb_dequeue+0x18/0x61 [<ffffffff81609dbf>] _raw_spin_lock_irqsave+0x35/0x49 [<ffffffff814c928f>] ? skb_dequeue+0x18/0x61 [<ffffffff814c928f>] skb_dequeue+0x18/0x61 [<ffffffffa009aa92>] afs_deliver_to_call+0x344/0x39d [kafs] [<ffffffffa009ab37>] afs_process_async_call+0x4c/0xd5 [kafs] [<ffffffffa0099e9c>] afs_async_workfn+0xe/0x10 [kafs] [<ffffffff81063a3a>] process_one_work+0x29d/0x57c [<ffffffff81064ac2>] worker_thread+0x24a/0x385 [<ffffffff81064878>] ? rescuer_thread+0x2d0/0x2d0 [<ffffffff810696f5>] kthread+0xf3/0xfb [<ffffffff8160a6ff>] ret_from_fork+0x1f/0x40 [<ffffffff81069602>] ? kthread_create_on_node+0x1cf/0x1cf Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> diff 372ee163 Wed Aug 03 07:11:40 MDT 2016 David Howells <dhowells@redhat.com> rxrpc: Fix races between skb free, ACK generation and replying Inside the kafs filesystem it is possible to occasionally have a call processed and terminated before we've had a chance to check whether we need to clean up the rx queue for that call because afs_send_simple_reply() ends the call when it is done, but this is done in a workqueue item that might happen to run to completion before afs_deliver_to_call() completes. Further, it is possible for rxrpc_kernel_send_data() to be called to send a reply before the last request-phase data skb is released. The rxrpc skb destructor is where the ACK processing is done and the call state is advanced upon release of the last skb. ACK generation is also deferred to a work item because it's possible that the skb destructor is not called in a context where kernel_sendmsg() can be invoked. To this end, the following changes are made: (1) kernel_rxrpc_data_consumed() is added. This should be called whenever an skb is emptied so as to crank the ACK and call states. This does not release the skb, however. kernel_rxrpc_free_skb() must now be called to achieve that. These together replace rxrpc_kernel_data_delivered(). (2) kernel_rxrpc_data_consumed() is wrapped by afs_data_consumed(). This makes afs_deliver_to_call() easier to work as the skb can simply be discarded unconditionally here without trying to work out what the return value of the ->deliver() function means. The ->deliver() functions can, via afs_data_complete(), afs_transfer_reply() and afs_extract_data() mark that an skb has been consumed (thereby cranking the state) without the need to conditionally free the skb to make sure the state is correct on an incoming call for when the call processor tries to send the reply. (3) rxrpc_recvmsg() now has to call kernel_rxrpc_data_consumed() when it has finished with a packet and MSG_PEEK isn't set. (4) rxrpc_packet_destructor() no longer calls rxrpc_hard_ACK_data(). Because of this, we no longer need to clear the destructor and put the call before we free the skb in cases where we don't want the ACK/call state to be cranked. (5) The ->deliver() call-type callbacks are made to return -EAGAIN rather than 0 if they expect more data (afs_extract_data() returns -EAGAIN to the delivery function already), and the caller is now responsible for producing an abort if that was the last packet. (6) There are many bits of unmarshalling code where: ret = afs_extract_data(call, skb, last, ...); switch (ret) { case 0: break; case -EAGAIN: return 0; default: return ret; } is to be found. As -EAGAIN can now be passed back to the caller, we now just return if ret < 0: ret = afs_extract_data(call, skb, last, ...); if (ret < 0) return ret; (7) Checks for trailing data and empty final data packets has been consolidated as afs_data_complete(). So: if (skb->len > 0) return -EBADMSG; if (!last) return 0; becomes: ret = afs_data_complete(call, skb, last); if (ret < 0) return ret; (8) afs_transfer_reply() now checks the amount of data it has against the amount of data desired and the amount of data in the skb and returns an error to induce an abort if we don't get exactly what we want. Without these changes, the following oops can occasionally be observed, particularly if some printks are inserted into the delivery path: general protection fault: 0000 [#1] SMP Modules linked in: kafs(E) af_rxrpc(E) [last unloaded: af_rxrpc] CPU: 0 PID: 1305 Comm: kworker/u8:3 Tainted: G E 4.7.0-fsdevel+ #1303 Hardware name: ASUS All Series/H97-PLUS, BIOS 2306 10/09/2014 Workqueue: kafsd afs_async_workfn [kafs] task: ffff88040be041c0 ti: ffff88040c070000 task.ti: ffff88040c070000 RIP: 0010:[<ffffffff8108fd3c>] [<ffffffff8108fd3c>] __lock_acquire+0xcf/0x15a1 RSP: 0018:ffff88040c073bc0 EFLAGS: 00010002 RAX: 6b6b6b6b6b6b6b6b RBX: 0000000000000000 RCX: ffff88040d29a710 RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffff88040d29a710 RBP: ffff88040c073c70 R08: 0000000000000001 R09: 0000000000000001 R10: 0000000000000001 R11: 0000000000000000 R12: 0000000000000000 R13: 0000000000000000 R14: ffff88040be041c0 R15: ffffffff814c928f FS: 0000000000000000(0000) GS:ffff88041fa00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fa4595f4750 CR3: 0000000001c14000 CR4: 00000000001406f0 Stack: 0000000000000006 000000000be04930 0000000000000000 ffff880400000000 ffff880400000000 ffffffff8108f847 ffff88040be041c0 ffffffff81050446 ffff8803fc08a920 ffff8803fc08a958 ffff88040be041c0 ffff88040c073c38 Call Trace: [<ffffffff8108f847>] ? mark_held_locks+0x5e/0x74 [<ffffffff81050446>] ? __local_bh_enable_ip+0x9b/0xa1 [<ffffffff8108f9ca>] ? trace_hardirqs_on_caller+0x16d/0x189 [<ffffffff810915f4>] lock_acquire+0x122/0x1b6 [<ffffffff810915f4>] ? lock_acquire+0x122/0x1b6 [<ffffffff814c928f>] ? skb_dequeue+0x18/0x61 [<ffffffff81609dbf>] _raw_spin_lock_irqsave+0x35/0x49 [<ffffffff814c928f>] ? skb_dequeue+0x18/0x61 [<ffffffff814c928f>] skb_dequeue+0x18/0x61 [<ffffffffa009aa92>] afs_deliver_to_call+0x344/0x39d [kafs] [<ffffffffa009ab37>] afs_process_async_call+0x4c/0xd5 [kafs] [<ffffffffa0099e9c>] afs_async_workfn+0xe/0x10 [kafs] [<ffffffff81063a3a>] process_one_work+0x29d/0x57c [<ffffffff81064ac2>] worker_thread+0x24a/0x385 [<ffffffff81064878>] ? rescuer_thread+0x2d0/0x2d0 [<ffffffff810696f5>] kthread+0xf3/0xfb [<ffffffff8160a6ff>] ret_from_fork+0x1f/0x40 [<ffffffff81069602>] ? kthread_create_on_node+0x1cf/0x1cf Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> diff 372ee163 Wed Aug 03 07:11:40 MDT 2016 David Howells <dhowells@redhat.com> rxrpc: Fix races between skb free, ACK generation and replying Inside the kafs filesystem it is possible to occasionally have a call processed and terminated before we've had a chance to check whether we need to clean up the rx queue for that call because afs_send_simple_reply() ends the call when it is done, but this is done in a workqueue item that might happen to run to completion before afs_deliver_to_call() completes. Further, it is possible for rxrpc_kernel_send_data() to be called to send a reply before the last request-phase data skb is released. The rxrpc skb destructor is where the ACK processing is done and the call state is advanced upon release of the last skb. ACK generation is also deferred to a work item because it's possible that the skb destructor is not called in a context where kernel_sendmsg() can be invoked. To this end, the following changes are made: (1) kernel_rxrpc_data_consumed() is added. This should be called whenever an skb is emptied so as to crank the ACK and call states. This does not release the skb, however. kernel_rxrpc_free_skb() must now be called to achieve that. These together replace rxrpc_kernel_data_delivered(). (2) kernel_rxrpc_data_consumed() is wrapped by afs_data_consumed(). This makes afs_deliver_to_call() easier to work as the skb can simply be discarded unconditionally here without trying to work out what the return value of the ->deliver() function means. The ->deliver() functions can, via afs_data_complete(), afs_transfer_reply() and afs_extract_data() mark that an skb has been consumed (thereby cranking the state) without the need to conditionally free the skb to make sure the state is correct on an incoming call for when the call processor tries to send the reply. (3) rxrpc_recvmsg() now has to call kernel_rxrpc_data_consumed() when it has finished with a packet and MSG_PEEK isn't set. (4) rxrpc_packet_destructor() no longer calls rxrpc_hard_ACK_data(). Because of this, we no longer need to clear the destructor and put the call before we free the skb in cases where we don't want the ACK/call state to be cranked. (5) The ->deliver() call-type callbacks are made to return -EAGAIN rather than 0 if they expect more data (afs_extract_data() returns -EAGAIN to the delivery function already), and the caller is now responsible for producing an abort if that was the last packet. (6) There are many bits of unmarshalling code where: ret = afs_extract_data(call, skb, last, ...); switch (ret) { case 0: break; case -EAGAIN: return 0; default: return ret; } is to be found. As -EAGAIN can now be passed back to the caller, we now just return if ret < 0: ret = afs_extract_data(call, skb, last, ...); if (ret < 0) return ret; (7) Checks for trailing data and empty final data packets has been consolidated as afs_data_complete(). So: if (skb->len > 0) return -EBADMSG; if (!last) return 0; becomes: ret = afs_data_complete(call, skb, last); if (ret < 0) return ret; (8) afs_transfer_reply() now checks the amount of data it has against the amount of data desired and the amount of data in the skb and returns an error to induce an abort if we don't get exactly what we want. Without these changes, the following oops can occasionally be observed, particularly if some printks are inserted into the delivery path: general protection fault: 0000 [#1] SMP Modules linked in: kafs(E) af_rxrpc(E) [last unloaded: af_rxrpc] CPU: 0 PID: 1305 Comm: kworker/u8:3 Tainted: G E 4.7.0-fsdevel+ #1303 Hardware name: ASUS All Series/H97-PLUS, BIOS 2306 10/09/2014 Workqueue: kafsd afs_async_workfn [kafs] task: ffff88040be041c0 ti: ffff88040c070000 task.ti: ffff88040c070000 RIP: 0010:[<ffffffff8108fd3c>] [<ffffffff8108fd3c>] __lock_acquire+0xcf/0x15a1 RSP: 0018:ffff88040c073bc0 EFLAGS: 00010002 RAX: 6b6b6b6b6b6b6b6b RBX: 0000000000000000 RCX: ffff88040d29a710 RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffff88040d29a710 RBP: ffff88040c073c70 R08: 0000000000000001 R09: 0000000000000001 R10: 0000000000000001 R11: 0000000000000000 R12: 0000000000000000 R13: 0000000000000000 R14: ffff88040be041c0 R15: ffffffff814c928f FS: 0000000000000000(0000) GS:ffff88041fa00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fa4595f4750 CR3: 0000000001c14000 CR4: 00000000001406f0 Stack: 0000000000000006 000000000be04930 0000000000000000 ffff880400000000 ffff880400000000 ffffffff8108f847 ffff88040be041c0 ffffffff81050446 ffff8803fc08a920 ffff8803fc08a958 ffff88040be041c0 ffff88040c073c38 Call Trace: [<ffffffff8108f847>] ? mark_held_locks+0x5e/0x74 [<ffffffff81050446>] ? __local_bh_enable_ip+0x9b/0xa1 [<ffffffff8108f9ca>] ? trace_hardirqs_on_caller+0x16d/0x189 [<ffffffff810915f4>] lock_acquire+0x122/0x1b6 [<ffffffff810915f4>] ? lock_acquire+0x122/0x1b6 [<ffffffff814c928f>] ? skb_dequeue+0x18/0x61 [<ffffffff81609dbf>] _raw_spin_lock_irqsave+0x35/0x49 [<ffffffff814c928f>] ? skb_dequeue+0x18/0x61 [<ffffffff814c928f>] skb_dequeue+0x18/0x61 [<ffffffffa009aa92>] afs_deliver_to_call+0x344/0x39d [kafs] [<ffffffffa009ab37>] afs_process_async_call+0x4c/0xd5 [kafs] [<ffffffffa0099e9c>] afs_async_workfn+0xe/0x10 [kafs] [<ffffffff81063a3a>] process_one_work+0x29d/0x57c [<ffffffff81064ac2>] worker_thread+0x24a/0x385 [<ffffffff81064878>] ? rescuer_thread+0x2d0/0x2d0 [<ffffffff810696f5>] kthread+0xf3/0xfb [<ffffffff8160a6ff>] ret_from_fork+0x1f/0x40 [<ffffffff81069602>] ? kthread_create_on_node+0x1cf/0x1cf Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> diff 372ee163 Wed Aug 03 07:11:40 MDT 2016 David Howells <dhowells@redhat.com> rxrpc: Fix races between skb free, ACK generation and replying Inside the kafs filesystem it is possible to occasionally have a call processed and terminated before we've had a chance to check whether we need to clean up the rx queue for that call because afs_send_simple_reply() ends the call when it is done, but this is done in a workqueue item that might happen to run to completion before afs_deliver_to_call() completes. Further, it is possible for rxrpc_kernel_send_data() to be called to send a reply before the last request-phase data skb is released. The rxrpc skb destructor is where the ACK processing is done and the call state is advanced upon release of the last skb. ACK generation is also deferred to a work item because it's possible that the skb destructor is not called in a context where kernel_sendmsg() can be invoked. To this end, the following changes are made: (1) kernel_rxrpc_data_consumed() is added. This should be called whenever an skb is emptied so as to crank the ACK and call states. This does not release the skb, however. kernel_rxrpc_free_skb() must now be called to achieve that. These together replace rxrpc_kernel_data_delivered(). (2) kernel_rxrpc_data_consumed() is wrapped by afs_data_consumed(). This makes afs_deliver_to_call() easier to work as the skb can simply be discarded unconditionally here without trying to work out what the return value of the ->deliver() function means. The ->deliver() functions can, via afs_data_complete(), afs_transfer_reply() and afs_extract_data() mark that an skb has been consumed (thereby cranking the state) without the need to conditionally free the skb to make sure the state is correct on an incoming call for when the call processor tries to send the reply. (3) rxrpc_recvmsg() now has to call kernel_rxrpc_data_consumed() when it has finished with a packet and MSG_PEEK isn't set. (4) rxrpc_packet_destructor() no longer calls rxrpc_hard_ACK_data(). Because of this, we no longer need to clear the destructor and put the call before we free the skb in cases where we don't want the ACK/call state to be cranked. (5) The ->deliver() call-type callbacks are made to return -EAGAIN rather than 0 if they expect more data (afs_extract_data() returns -EAGAIN to the delivery function already), and the caller is now responsible for producing an abort if that was the last packet. (6) There are many bits of unmarshalling code where: ret = afs_extract_data(call, skb, last, ...); switch (ret) { case 0: break; case -EAGAIN: return 0; default: return ret; } is to be found. As -EAGAIN can now be passed back to the caller, we now just return if ret < 0: ret = afs_extract_data(call, skb, last, ...); if (ret < 0) return ret; (7) Checks for trailing data and empty final data packets has been consolidated as afs_data_complete(). So: if (skb->len > 0) return -EBADMSG; if (!last) return 0; becomes: ret = afs_data_complete(call, skb, last); if (ret < 0) return ret; (8) afs_transfer_reply() now checks the amount of data it has against the amount of data desired and the amount of data in the skb and returns an error to induce an abort if we don't get exactly what we want. Without these changes, the following oops can occasionally be observed, particularly if some printks are inserted into the delivery path: general protection fault: 0000 [#1] SMP Modules linked in: kafs(E) af_rxrpc(E) [last unloaded: af_rxrpc] CPU: 0 PID: 1305 Comm: kworker/u8:3 Tainted: G E 4.7.0-fsdevel+ #1303 Hardware name: ASUS All Series/H97-PLUS, BIOS 2306 10/09/2014 Workqueue: kafsd afs_async_workfn [kafs] task: ffff88040be041c0 ti: ffff88040c070000 task.ti: ffff88040c070000 RIP: 0010:[<ffffffff8108fd3c>] [<ffffffff8108fd3c>] __lock_acquire+0xcf/0x15a1 RSP: 0018:ffff88040c073bc0 EFLAGS: 00010002 RAX: 6b6b6b6b6b6b6b6b RBX: 0000000000000000 RCX: ffff88040d29a710 RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffff88040d29a710 RBP: ffff88040c073c70 R08: 0000000000000001 R09: 0000000000000001 R10: 0000000000000001 R11: 0000000000000000 R12: 0000000000000000 R13: 0000000000000000 R14: ffff88040be041c0 R15: ffffffff814c928f FS: 0000000000000000(0000) GS:ffff88041fa00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fa4595f4750 CR3: 0000000001c14000 CR4: 00000000001406f0 Stack: 0000000000000006 000000000be04930 0000000000000000 ffff880400000000 ffff880400000000 ffffffff8108f847 ffff88040be041c0 ffffffff81050446 ffff8803fc08a920 ffff8803fc08a958 ffff88040be041c0 ffff88040c073c38 Call Trace: [<ffffffff8108f847>] ? mark_held_locks+0x5e/0x74 [<ffffffff81050446>] ? __local_bh_enable_ip+0x9b/0xa1 [<ffffffff8108f9ca>] ? trace_hardirqs_on_caller+0x16d/0x189 [<ffffffff810915f4>] lock_acquire+0x122/0x1b6 [<ffffffff810915f4>] ? lock_acquire+0x122/0x1b6 [<ffffffff814c928f>] ? skb_dequeue+0x18/0x61 [<ffffffff81609dbf>] _raw_spin_lock_irqsave+0x35/0x49 [<ffffffff814c928f>] ? skb_dequeue+0x18/0x61 [<ffffffff814c928f>] skb_dequeue+0x18/0x61 [<ffffffffa009aa92>] afs_deliver_to_call+0x344/0x39d [kafs] [<ffffffffa009ab37>] afs_process_async_call+0x4c/0xd5 [kafs] [<ffffffffa0099e9c>] afs_async_workfn+0xe/0x10 [kafs] [<ffffffff81063a3a>] process_one_work+0x29d/0x57c [<ffffffff81064ac2>] worker_thread+0x24a/0x385 [<ffffffff81064878>] ? rescuer_thread+0x2d0/0x2d0 [<ffffffff810696f5>] kthread+0xf3/0xfb [<ffffffff8160a6ff>] ret_from_fork+0x1f/0x40 [<ffffffff81069602>] ? kthread_create_on_node+0x1cf/0x1cf Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> diff 372ee163 Wed Aug 03 07:11:40 MDT 2016 David Howells <dhowells@redhat.com> rxrpc: Fix races between skb free, ACK generation and replying Inside the kafs filesystem it is possible to occasionally have a call processed and terminated before we've had a chance to check whether we need to clean up the rx queue for that call because afs_send_simple_reply() ends the call when it is done, but this is done in a workqueue item that might happen to run to completion before afs_deliver_to_call() completes. Further, it is possible for rxrpc_kernel_send_data() to be called to send a reply before the last request-phase data skb is released. The rxrpc skb destructor is where the ACK processing is done and the call state is advanced upon release of the last skb. ACK generation is also deferred to a work item because it's possible that the skb destructor is not called in a context where kernel_sendmsg() can be invoked. To this end, the following changes are made: (1) kernel_rxrpc_data_consumed() is added. This should be called whenever an skb is emptied so as to crank the ACK and call states. This does not release the skb, however. kernel_rxrpc_free_skb() must now be called to achieve that. These together replace rxrpc_kernel_data_delivered(). (2) kernel_rxrpc_data_consumed() is wrapped by afs_data_consumed(). This makes afs_deliver_to_call() easier to work as the skb can simply be discarded unconditionally here without trying to work out what the return value of the ->deliver() function means. The ->deliver() functions can, via afs_data_complete(), afs_transfer_reply() and afs_extract_data() mark that an skb has been consumed (thereby cranking the state) without the need to conditionally free the skb to make sure the state is correct on an incoming call for when the call processor tries to send the reply. (3) rxrpc_recvmsg() now has to call kernel_rxrpc_data_consumed() when it has finished with a packet and MSG_PEEK isn't set. (4) rxrpc_packet_destructor() no longer calls rxrpc_hard_ACK_data(). Because of this, we no longer need to clear the destructor and put the call before we free the skb in cases where we don't want the ACK/call state to be cranked. (5) The ->deliver() call-type callbacks are made to return -EAGAIN rather than 0 if they expect more data (afs_extract_data() returns -EAGAIN to the delivery function already), and the caller is now responsible for producing an abort if that was the last packet. (6) There are many bits of unmarshalling code where: ret = afs_extract_data(call, skb, last, ...); switch (ret) { case 0: break; case -EAGAIN: return 0; default: return ret; } is to be found. As -EAGAIN can now be passed back to the caller, we now just return if ret < 0: ret = afs_extract_data(call, skb, last, ...); if (ret < 0) return ret; (7) Checks for trailing data and empty final data packets has been consolidated as afs_data_complete(). So: if (skb->len > 0) return -EBADMSG; if (!last) return 0; becomes: ret = afs_data_complete(call, skb, last); if (ret < 0) return ret; (8) afs_transfer_reply() now checks the amount of data it has against the amount of data desired and the amount of data in the skb and returns an error to induce an abort if we don't get exactly what we want. Without these changes, the following oops can occasionally be observed, particularly if some printks are inserted into the delivery path: general protection fault: 0000 [#1] SMP Modules linked in: kafs(E) af_rxrpc(E) [last unloaded: af_rxrpc] CPU: 0 PID: 1305 Comm: kworker/u8:3 Tainted: G E 4.7.0-fsdevel+ #1303 Hardware name: ASUS All Series/H97-PLUS, BIOS 2306 10/09/2014 Workqueue: kafsd afs_async_workfn [kafs] task: ffff88040be041c0 ti: ffff88040c070000 task.ti: ffff88040c070000 RIP: 0010:[<ffffffff8108fd3c>] [<ffffffff8108fd3c>] __lock_acquire+0xcf/0x15a1 RSP: 0018:ffff88040c073bc0 EFLAGS: 00010002 RAX: 6b6b6b6b6b6b6b6b RBX: 0000000000000000 RCX: ffff88040d29a710 RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffff88040d29a710 RBP: ffff88040c073c70 R08: 0000000000000001 R09: 0000000000000001 R10: 0000000000000001 R11: 0000000000000000 R12: 0000000000000000 R13: 0000000000000000 R14: ffff88040be041c0 R15: ffffffff814c928f FS: 0000000000000000(0000) GS:ffff88041fa00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fa4595f4750 CR3: 0000000001c14000 CR4: 00000000001406f0 Stack: 0000000000000006 000000000be04930 0000000000000000 ffff880400000000 ffff880400000000 ffffffff8108f847 ffff88040be041c0 ffffffff81050446 ffff8803fc08a920 ffff8803fc08a958 ffff88040be041c0 ffff88040c073c38 Call Trace: [<ffffffff8108f847>] ? mark_held_locks+0x5e/0x74 [<ffffffff81050446>] ? __local_bh_enable_ip+0x9b/0xa1 [<ffffffff8108f9ca>] ? trace_hardirqs_on_caller+0x16d/0x189 [<ffffffff810915f4>] lock_acquire+0x122/0x1b6 [<ffffffff810915f4>] ? lock_acquire+0x122/0x1b6 [<ffffffff814c928f>] ? skb_dequeue+0x18/0x61 [<ffffffff81609dbf>] _raw_spin_lock_irqsave+0x35/0x49 [<ffffffff814c928f>] ? skb_dequeue+0x18/0x61 [<ffffffff814c928f>] skb_dequeue+0x18/0x61 [<ffffffffa009aa92>] afs_deliver_to_call+0x344/0x39d [kafs] [<ffffffffa009ab37>] afs_process_async_call+0x4c/0xd5 [kafs] [<ffffffffa0099e9c>] afs_async_workfn+0xe/0x10 [kafs] [<ffffffff81063a3a>] process_one_work+0x29d/0x57c [<ffffffff81064ac2>] worker_thread+0x24a/0x385 [<ffffffff81064878>] ? rescuer_thread+0x2d0/0x2d0 [<ffffffff810696f5>] kthread+0xf3/0xfb [<ffffffff8160a6ff>] ret_from_fork+0x1f/0x40 [<ffffffff81069602>] ? kthread_create_on_node+0x1cf/0x1cf Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> diff 372ee163 Wed Aug 03 07:11:40 MDT 2016 David Howells <dhowells@redhat.com> rxrpc: Fix races between skb free, ACK generation and replying Inside the kafs filesystem it is possible to occasionally have a call processed and terminated before we've had a chance to check whether we need to clean up the rx queue for that call because afs_send_simple_reply() ends the call when it is done, but this is done in a workqueue item that might happen to run to completion before afs_deliver_to_call() completes. Further, it is possible for rxrpc_kernel_send_data() to be called to send a reply before the last request-phase data skb is released. The rxrpc skb destructor is where the ACK processing is done and the call state is advanced upon release of the last skb. ACK generation is also deferred to a work item because it's possible that the skb destructor is not called in a context where kernel_sendmsg() can be invoked. To this end, the following changes are made: (1) kernel_rxrpc_data_consumed() is added. This should be called whenever an skb is emptied so as to crank the ACK and call states. This does not release the skb, however. kernel_rxrpc_free_skb() must now be called to achieve that. These together replace rxrpc_kernel_data_delivered(). (2) kernel_rxrpc_data_consumed() is wrapped by afs_data_consumed(). This makes afs_deliver_to_call() easier to work as the skb can simply be discarded unconditionally here without trying to work out what the return value of the ->deliver() function means. The ->deliver() functions can, via afs_data_complete(), afs_transfer_reply() and afs_extract_data() mark that an skb has been consumed (thereby cranking the state) without the need to conditionally free the skb to make sure the state is correct on an incoming call for when the call processor tries to send the reply. (3) rxrpc_recvmsg() now has to call kernel_rxrpc_data_consumed() when it has finished with a packet and MSG_PEEK isn't set. (4) rxrpc_packet_destructor() no longer calls rxrpc_hard_ACK_data(). Because of this, we no longer need to clear the destructor and put the call before we free the skb in cases where we don't want the ACK/call state to be cranked. (5) The ->deliver() call-type callbacks are made to return -EAGAIN rather than 0 if they expect more data (afs_extract_data() returns -EAGAIN to the delivery function already), and the caller is now responsible for producing an abort if that was the last packet. (6) There are many bits of unmarshalling code where: ret = afs_extract_data(call, skb, last, ...); switch (ret) { case 0: break; case -EAGAIN: return 0; default: return ret; } is to be found. As -EAGAIN can now be passed back to the caller, we now just return if ret < 0: ret = afs_extract_data(call, skb, last, ...); if (ret < 0) return ret; (7) Checks for trailing data and empty final data packets has been consolidated as afs_data_complete(). So: if (skb->len > 0) return -EBADMSG; if (!last) return 0; becomes: ret = afs_data_complete(call, skb, last); if (ret < 0) return ret; (8) afs_transfer_reply() now checks the amount of data it has against the amount of data desired and the amount of data in the skb and returns an error to induce an abort if we don't get exactly what we want. Without these changes, the following oops can occasionally be observed, particularly if some printks are inserted into the delivery path: general protection fault: 0000 [#1] SMP Modules linked in: kafs(E) af_rxrpc(E) [last unloaded: af_rxrpc] CPU: 0 PID: 1305 Comm: kworker/u8:3 Tainted: G E 4.7.0-fsdevel+ #1303 Hardware name: ASUS All Series/H97-PLUS, BIOS 2306 10/09/2014 Workqueue: kafsd afs_async_workfn [kafs] task: ffff88040be041c0 ti: ffff88040c070000 task.ti: ffff88040c070000 RIP: 0010:[<ffffffff8108fd3c>] [<ffffffff8108fd3c>] __lock_acquire+0xcf/0x15a1 RSP: 0018:ffff88040c073bc0 EFLAGS: 00010002 RAX: 6b6b6b6b6b6b6b6b RBX: 0000000000000000 RCX: ffff88040d29a710 RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffff88040d29a710 RBP: ffff88040c073c70 R08: 0000000000000001 R09: 0000000000000001 R10: 0000000000000001 R11: 0000000000000000 R12: 0000000000000000 R13: 0000000000000000 R14: ffff88040be041c0 R15: ffffffff814c928f FS: 0000000000000000(0000) GS:ffff88041fa00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fa4595f4750 CR3: 0000000001c14000 CR4: 00000000001406f0 Stack: 0000000000000006 000000000be04930 0000000000000000 ffff880400000000 ffff880400000000 ffffffff8108f847 ffff88040be041c0 ffffffff81050446 ffff8803fc08a920 ffff8803fc08a958 ffff88040be041c0 ffff88040c073c38 Call Trace: [<ffffffff8108f847>] ? mark_held_locks+0x5e/0x74 [<ffffffff81050446>] ? __local_bh_enable_ip+0x9b/0xa1 [<ffffffff8108f9ca>] ? trace_hardirqs_on_caller+0x16d/0x189 [<ffffffff810915f4>] lock_acquire+0x122/0x1b6 [<ffffffff810915f4>] ? lock_acquire+0x122/0x1b6 [<ffffffff814c928f>] ? skb_dequeue+0x18/0x61 [<ffffffff81609dbf>] _raw_spin_lock_irqsave+0x35/0x49 [<ffffffff814c928f>] ? skb_dequeue+0x18/0x61 [<ffffffff814c928f>] skb_dequeue+0x18/0x61 [<ffffffffa009aa92>] afs_deliver_to_call+0x344/0x39d [kafs] [<ffffffffa009ab37>] afs_process_async_call+0x4c/0xd5 [kafs] [<ffffffffa0099e9c>] afs_async_workfn+0xe/0x10 [kafs] [<ffffffff81063a3a>] process_one_work+0x29d/0x57c [<ffffffff81064ac2>] worker_thread+0x24a/0x385 [<ffffffff81064878>] ? rescuer_thread+0x2d0/0x2d0 [<ffffffff810696f5>] kthread+0xf3/0xfb [<ffffffff8160a6ff>] ret_from_fork+0x1f/0x40 [<ffffffff81069602>] ? kthread_create_on_node+0x1cf/0x1cf Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> diff 372ee163 Wed Aug 03 07:11:40 MDT 2016 David Howells <dhowells@redhat.com> rxrpc: Fix races between skb free, ACK generation and replying Inside the kafs filesystem it is possible to occasionally have a call processed and terminated before we've had a chance to check whether we need to clean up the rx queue for that call because afs_send_simple_reply() ends the call when it is done, but this is done in a workqueue item that might happen to run to completion before afs_deliver_to_call() completes. Further, it is possible for rxrpc_kernel_send_data() to be called to send a reply before the last request-phase data skb is released. The rxrpc skb destructor is where the ACK processing is done and the call state is advanced upon release of the last skb. ACK generation is also deferred to a work item because it's possible that the skb destructor is not called in a context where kernel_sendmsg() can be invoked. To this end, the following changes are made: (1) kernel_rxrpc_data_consumed() is added. This should be called whenever an skb is emptied so as to crank the ACK and call states. This does not release the skb, however. kernel_rxrpc_free_skb() must now be called to achieve that. These together replace rxrpc_kernel_data_delivered(). (2) kernel_rxrpc_data_consumed() is wrapped by afs_data_consumed(). This makes afs_deliver_to_call() easier to work as the skb can simply be discarded unconditionally here without trying to work out what the return value of the ->deliver() function means. The ->deliver() functions can, via afs_data_complete(), afs_transfer_reply() and afs_extract_data() mark that an skb has been consumed (thereby cranking the state) without the need to conditionally free the skb to make sure the state is correct on an incoming call for when the call processor tries to send the reply. (3) rxrpc_recvmsg() now has to call kernel_rxrpc_data_consumed() when it has finished with a packet and MSG_PEEK isn't set. (4) rxrpc_packet_destructor() no longer calls rxrpc_hard_ACK_data(). Because of this, we no longer need to clear the destructor and put the call before we free the skb in cases where we don't want the ACK/call state to be cranked. (5) The ->deliver() call-type callbacks are made to return -EAGAIN rather than 0 if they expect more data (afs_extract_data() returns -EAGAIN to the delivery function already), and the caller is now responsible for producing an abort if that was the last packet. (6) There are many bits of unmarshalling code where: ret = afs_extract_data(call, skb, last, ...); switch (ret) { case 0: break; case -EAGAIN: return 0; default: return ret; } is to be found. As -EAGAIN can now be passed back to the caller, we now just return if ret < 0: ret = afs_extract_data(call, skb, last, ...); if (ret < 0) return ret; (7) Checks for trailing data and empty final data packets has been consolidated as afs_data_complete(). So: if (skb->len > 0) return -EBADMSG; if (!last) return 0; becomes: ret = afs_data_complete(call, skb, last); if (ret < 0) return ret; (8) afs_transfer_reply() now checks the amount of data it has against the amount of data desired and the amount of data in the skb and returns an error to induce an abort if we don't get exactly what we want. Without these changes, the following oops can occasionally be observed, particularly if some printks are inserted into the delivery path: general protection fault: 0000 [#1] SMP Modules linked in: kafs(E) af_rxrpc(E) [last unloaded: af_rxrpc] CPU: 0 PID: 1305 Comm: kworker/u8:3 Tainted: G E 4.7.0-fsdevel+ #1303 Hardware name: ASUS All Series/H97-PLUS, BIOS 2306 10/09/2014 Workqueue: kafsd afs_async_workfn [kafs] task: ffff88040be041c0 ti: ffff88040c070000 task.ti: ffff88040c070000 RIP: 0010:[<ffffffff8108fd3c>] [<ffffffff8108fd3c>] __lock_acquire+0xcf/0x15a1 RSP: 0018:ffff88040c073bc0 EFLAGS: 00010002 RAX: 6b6b6b6b6b6b6b6b RBX: 0000000000000000 RCX: ffff88040d29a710 RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffff88040d29a710 RBP: ffff88040c073c70 R08: 0000000000000001 R09: 0000000000000001 R10: 0000000000000001 R11: 0000000000000000 R12: 0000000000000000 R13: 0000000000000000 R14: ffff88040be041c0 R15: ffffffff814c928f FS: 0000000000000000(0000) GS:ffff88041fa00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fa4595f4750 CR3: 0000000001c14000 CR4: 00000000001406f0 Stack: 0000000000000006 000000000be04930 0000000000000000 ffff880400000000 ffff880400000000 ffffffff8108f847 ffff88040be041c0 ffffffff81050446 ffff8803fc08a920 ffff8803fc08a958 ffff88040be041c0 ffff88040c073c38 Call Trace: [<ffffffff8108f847>] ? mark_held_locks+0x5e/0x74 [<ffffffff81050446>] ? __local_bh_enable_ip+0x9b/0xa1 [<ffffffff8108f9ca>] ? trace_hardirqs_on_caller+0x16d/0x189 [<ffffffff810915f4>] lock_acquire+0x122/0x1b6 [<ffffffff810915f4>] ? lock_acquire+0x122/0x1b6 [<ffffffff814c928f>] ? skb_dequeue+0x18/0x61 [<ffffffff81609dbf>] _raw_spin_lock_irqsave+0x35/0x49 [<ffffffff814c928f>] ? skb_dequeue+0x18/0x61 [<ffffffff814c928f>] skb_dequeue+0x18/0x61 [<ffffffffa009aa92>] afs_deliver_to_call+0x344/0x39d [kafs] [<ffffffffa009ab37>] afs_process_async_call+0x4c/0xd5 [kafs] [<ffffffffa0099e9c>] afs_async_workfn+0xe/0x10 [kafs] [<ffffffff81063a3a>] process_one_work+0x29d/0x57c [<ffffffff81064ac2>] worker_thread+0x24a/0x385 [<ffffffff81064878>] ? rescuer_thread+0x2d0/0x2d0 [<ffffffff810696f5>] kthread+0xf3/0xfb [<ffffffff8160a6ff>] ret_from_fork+0x1f/0x40 [<ffffffff81069602>] ? kthread_create_on_node+0x1cf/0x1cf Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> diff 372ee163 Wed Aug 03 07:11:40 MDT 2016 David Howells <dhowells@redhat.com> rxrpc: Fix races between skb free, ACK generation and replying Inside the kafs filesystem it is possible to occasionally have a call processed and terminated before we've had a chance to check whether we need to clean up the rx queue for that call because afs_send_simple_reply() ends the call when it is done, but this is done in a workqueue item that might happen to run to completion before afs_deliver_to_call() completes. Further, it is possible for rxrpc_kernel_send_data() to be called to send a reply before the last request-phase data skb is released. The rxrpc skb destructor is where the ACK processing is done and the call state is advanced upon release of the last skb. ACK generation is also deferred to a work item because it's possible that the skb destructor is not called in a context where kernel_sendmsg() can be invoked. To this end, the following changes are made: (1) kernel_rxrpc_data_consumed() is added. This should be called whenever an skb is emptied so as to crank the ACK and call states. This does not release the skb, however. kernel_rxrpc_free_skb() must now be called to achieve that. These together replace rxrpc_kernel_data_delivered(). (2) kernel_rxrpc_data_consumed() is wrapped by afs_data_consumed(). This makes afs_deliver_to_call() easier to work as the skb can simply be discarded unconditionally here without trying to work out what the return value of the ->deliver() function means. The ->deliver() functions can, via afs_data_complete(), afs_transfer_reply() and afs_extract_data() mark that an skb has been consumed (thereby cranking the state) without the need to conditionally free the skb to make sure the state is correct on an incoming call for when the call processor tries to send the reply. (3) rxrpc_recvmsg() now has to call kernel_rxrpc_data_consumed() when it has finished with a packet and MSG_PEEK isn't set. (4) rxrpc_packet_destructor() no longer calls rxrpc_hard_ACK_data(). Because of this, we no longer need to clear the destructor and put the call before we free the skb in cases where we don't want the ACK/call state to be cranked. (5) The ->deliver() call-type callbacks are made to return -EAGAIN rather than 0 if they expect more data (afs_extract_data() returns -EAGAIN to the delivery function already), and the caller is now responsible for producing an abort if that was the last packet. (6) There are many bits of unmarshalling code where: ret = afs_extract_data(call, skb, last, ...); switch (ret) { case 0: break; case -EAGAIN: return 0; default: return ret; } is to be found. As -EAGAIN can now be passed back to the caller, we now just return if ret < 0: ret = afs_extract_data(call, skb, last, ...); if (ret < 0) return ret; (7) Checks for trailing data and empty final data packets has been consolidated as afs_data_complete(). So: if (skb->len > 0) return -EBADMSG; if (!last) return 0; becomes: ret = afs_data_complete(call, skb, last); if (ret < 0) return ret; (8) afs_transfer_reply() now checks the amount of data it has against the amount of data desired and the amount of data in the skb and returns an error to induce an abort if we don't get exactly what we want. Without these changes, the following oops can occasionally be observed, particularly if some printks are inserted into the delivery path: general protection fault: 0000 [#1] SMP Modules linked in: kafs(E) af_rxrpc(E) [last unloaded: af_rxrpc] CPU: 0 PID: 1305 Comm: kworker/u8:3 Tainted: G E 4.7.0-fsdevel+ #1303 Hardware name: ASUS All Series/H97-PLUS, BIOS 2306 10/09/2014 Workqueue: kafsd afs_async_workfn [kafs] task: ffff88040be041c0 ti: ffff88040c070000 task.ti: ffff88040c070000 RIP: 0010:[<ffffffff8108fd3c>] [<ffffffff8108fd3c>] __lock_acquire+0xcf/0x15a1 RSP: 0018:ffff88040c073bc0 EFLAGS: 00010002 RAX: 6b6b6b6b6b6b6b6b RBX: 0000000000000000 RCX: ffff88040d29a710 RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffff88040d29a710 RBP: ffff88040c073c70 R08: 0000000000000001 R09: 0000000000000001 R10: 0000000000000001 R11: 0000000000000000 R12: 0000000000000000 R13: 0000000000000000 R14: ffff88040be041c0 R15: ffffffff814c928f FS: 0000000000000000(0000) GS:ffff88041fa00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fa4595f4750 CR3: 0000000001c14000 CR4: 00000000001406f0 Stack: 0000000000000006 000000000be04930 0000000000000000 ffff880400000000 ffff880400000000 ffffffff8108f847 ffff88040be041c0 ffffffff81050446 ffff8803fc08a920 ffff8803fc08a958 ffff88040be041c0 ffff88040c073c38 Call Trace: [<ffffffff8108f847>] ? mark_held_locks+0x5e/0x74 [<ffffffff81050446>] ? __local_bh_enable_ip+0x9b/0xa1 [<ffffffff8108f9ca>] ? trace_hardirqs_on_caller+0x16d/0x189 [<ffffffff810915f4>] lock_acquire+0x122/0x1b6 [<ffffffff810915f4>] ? lock_acquire+0x122/0x1b6 [<ffffffff814c928f>] ? skb_dequeue+0x18/0x61 [<ffffffff81609dbf>] _raw_spin_lock_irqsave+0x35/0x49 [<ffffffff814c928f>] ? skb_dequeue+0x18/0x61 [<ffffffff814c928f>] skb_dequeue+0x18/0x61 [<ffffffffa009aa92>] afs_deliver_to_call+0x344/0x39d [kafs] [<ffffffffa009ab37>] afs_process_async_call+0x4c/0xd5 [kafs] [<ffffffffa0099e9c>] afs_async_workfn+0xe/0x10 [kafs] [<ffffffff81063a3a>] process_one_work+0x29d/0x57c [<ffffffff81064ac2>] worker_thread+0x24a/0x385 [<ffffffff81064878>] ? rescuer_thread+0x2d0/0x2d0 [<ffffffff810696f5>] kthread+0xf3/0xfb [<ffffffff8160a6ff>] ret_from_fork+0x1f/0x40 [<ffffffff81069602>] ? kthread_create_on_node+0x1cf/0x1cf Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> diff 372ee163 Wed Aug 03 07:11:40 MDT 2016 David Howells <dhowells@redhat.com> rxrpc: Fix races between skb free, ACK generation and replying Inside the kafs filesystem it is possible to occasionally have a call processed and terminated before we've had a chance to check whether we need to clean up the rx queue for that call because afs_send_simple_reply() ends the call when it is done, but this is done in a workqueue item that might happen to run to completion before afs_deliver_to_call() completes. Further, it is possible for rxrpc_kernel_send_data() to be called to send a reply before the last request-phase data skb is released. The rxrpc skb destructor is where the ACK processing is done and the call state is advanced upon release of the last skb. ACK generation is also deferred to a work item because it's possible that the skb destructor is not called in a context where kernel_sendmsg() can be invoked. To this end, the following changes are made: (1) kernel_rxrpc_data_consumed() is added. This should be called whenever an skb is emptied so as to crank the ACK and call states. This does not release the skb, however. kernel_rxrpc_free_skb() must now be called to achieve that. These together replace rxrpc_kernel_data_delivered(). (2) kernel_rxrpc_data_consumed() is wrapped by afs_data_consumed(). This makes afs_deliver_to_call() easier to work as the skb can simply be discarded unconditionally here without trying to work out what the return value of the ->deliver() function means. The ->deliver() functions can, via afs_data_complete(), afs_transfer_reply() and afs_extract_data() mark that an skb has been consumed (thereby cranking the state) without the need to conditionally free the skb to make sure the state is correct on an incoming call for when the call processor tries to send the reply. (3) rxrpc_recvmsg() now has to call kernel_rxrpc_data_consumed() when it has finished with a packet and MSG_PEEK isn't set. (4) rxrpc_packet_destructor() no longer calls rxrpc_hard_ACK_data(). Because of this, we no longer need to clear the destructor and put the call before we free the skb in cases where we don't want the ACK/call state to be cranked. (5) The ->deliver() call-type callbacks are made to return -EAGAIN rather than 0 if they expect more data (afs_extract_data() returns -EAGAIN to the delivery function already), and the caller is now responsible for producing an abort if that was the last packet. (6) There are many bits of unmarshalling code where: ret = afs_extract_data(call, skb, last, ...); switch (ret) { case 0: break; case -EAGAIN: return 0; default: return ret; } is to be found. As -EAGAIN can now be passed back to the caller, we now just return if ret < 0: ret = afs_extract_data(call, skb, last, ...); if (ret < 0) return ret; (7) Checks for trailing data and empty final data packets has been consolidated as afs_data_complete(). So: if (skb->len > 0) return -EBADMSG; if (!last) return 0; becomes: ret = afs_data_complete(call, skb, last); if (ret < 0) return ret; (8) afs_transfer_reply() now checks the amount of data it has against the amount of data desired and the amount of data in the skb and returns an error to induce an abort if we don't get exactly what we want. Without these changes, the following oops can occasionally be observed, particularly if some printks are inserted into the delivery path: general protection fault: 0000 [#1] SMP Modules linked in: kafs(E) af_rxrpc(E) [last unloaded: af_rxrpc] CPU: 0 PID: 1305 Comm: kworker/u8:3 Tainted: G E 4.7.0-fsdevel+ #1303 Hardware name: ASUS All Series/H97-PLUS, BIOS 2306 10/09/2014 Workqueue: kafsd afs_async_workfn [kafs] task: ffff88040be041c0 ti: ffff88040c070000 task.ti: ffff88040c070000 RIP: 0010:[<ffffffff8108fd3c>] [<ffffffff8108fd3c>] __lock_acquire+0xcf/0x15a1 RSP: 0018:ffff88040c073bc0 EFLAGS: 00010002 RAX: 6b6b6b6b6b6b6b6b RBX: 0000000000000000 RCX: ffff88040d29a710 RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffff88040d29a710 RBP: ffff88040c073c70 R08: 0000000000000001 R09: 0000000000000001 R10: 0000000000000001 R11: 0000000000000000 R12: 0000000000000000 R13: 0000000000000000 R14: ffff88040be041c0 R15: ffffffff814c928f FS: 0000000000000000(0000) GS:ffff88041fa00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fa4595f4750 CR3: 0000000001c14000 CR4: 00000000001406f0 Stack: 0000000000000006 000000000be04930 0000000000000000 ffff880400000000 ffff880400000000 ffffffff8108f847 ffff88040be041c0 ffffffff81050446 ffff8803fc08a920 ffff8803fc08a958 ffff88040be041c0 ffff88040c073c38 Call Trace: [<ffffffff8108f847>] ? mark_held_locks+0x5e/0x74 [<ffffffff81050446>] ? __local_bh_enable_ip+0x9b/0xa1 [<ffffffff8108f9ca>] ? trace_hardirqs_on_caller+0x16d/0x189 [<ffffffff810915f4>] lock_acquire+0x122/0x1b6 [<ffffffff810915f4>] ? lock_acquire+0x122/0x1b6 [<ffffffff814c928f>] ? skb_dequeue+0x18/0x61 [<ffffffff81609dbf>] _raw_spin_lock_irqsave+0x35/0x49 [<ffffffff814c928f>] ? skb_dequeue+0x18/0x61 [<ffffffff814c928f>] skb_dequeue+0x18/0x61 [<ffffffffa009aa92>] afs_deliver_to_call+0x344/0x39d [kafs] [<ffffffffa009ab37>] afs_process_async_call+0x4c/0xd5 [kafs] [<ffffffffa0099e9c>] afs_async_workfn+0xe/0x10 [kafs] [<ffffffff81063a3a>] process_one_work+0x29d/0x57c [<ffffffff81064ac2>] worker_thread+0x24a/0x385 [<ffffffff81064878>] ? rescuer_thread+0x2d0/0x2d0 [<ffffffff810696f5>] kthread+0xf3/0xfb [<ffffffff8160a6ff>] ret_from_fork+0x1f/0x40 [<ffffffff81069602>] ? kthread_create_on_node+0x1cf/0x1cf Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> diff 372ee163 Wed Aug 03 07:11:40 MDT 2016 David Howells <dhowells@redhat.com> rxrpc: Fix races between skb free, ACK generation and replying Inside the kafs filesystem it is possible to occasionally have a call processed and terminated before we've had a chance to check whether we need to clean up the rx queue for that call because afs_send_simple_reply() ends the call when it is done, but this is done in a workqueue item that might happen to run to completion before afs_deliver_to_call() completes. Further, it is possible for rxrpc_kernel_send_data() to be called to send a reply before the last request-phase data skb is released. The rxrpc skb destructor is where the ACK processing is done and the call state is advanced upon release of the last skb. ACK generation is also deferred to a work item because it's possible that the skb destructor is not called in a context where kernel_sendmsg() can be invoked. To this end, the following changes are made: (1) kernel_rxrpc_data_consumed() is added. This should be called whenever an skb is emptied so as to crank the ACK and call states. This does not release the skb, however. kernel_rxrpc_free_skb() must now be called to achieve that. These together replace rxrpc_kernel_data_delivered(). (2) kernel_rxrpc_data_consumed() is wrapped by afs_data_consumed(). This makes afs_deliver_to_call() easier to work as the skb can simply be discarded unconditionally here without trying to work out what the return value of the ->deliver() function means. The ->deliver() functions can, via afs_data_complete(), afs_transfer_reply() and afs_extract_data() mark that an skb has been consumed (thereby cranking the state) without the need to conditionally free the skb to make sure the state is correct on an incoming call for when the call processor tries to send the reply. (3) rxrpc_recvmsg() now has to call kernel_rxrpc_data_consumed() when it has finished with a packet and MSG_PEEK isn't set. (4) rxrpc_packet_destructor() no longer calls rxrpc_hard_ACK_data(). Because of this, we no longer need to clear the destructor and put the call before we free the skb in cases where we don't want the ACK/call state to be cranked. (5) The ->deliver() call-type callbacks are made to return -EAGAIN rather than 0 if they expect more data (afs_extract_data() returns -EAGAIN to the delivery function already), and the caller is now responsible for producing an abort if that was the last packet. (6) There are many bits of unmarshalling code where: ret = afs_extract_data(call, skb, last, ...); switch (ret) { case 0: break; case -EAGAIN: return 0; default: return ret; } is to be found. As -EAGAIN can now be passed back to the caller, we now just return if ret < 0: ret = afs_extract_data(call, skb, last, ...); if (ret < 0) return ret; (7) Checks for trailing data and empty final data packets has been consolidated as afs_data_complete(). So: if (skb->len > 0) return -EBADMSG; if (!last) return 0; becomes: ret = afs_data_complete(call, skb, last); if (ret < 0) return ret; (8) afs_transfer_reply() now checks the amount of data it has against the amount of data desired and the amount of data in the skb and returns an error to induce an abort if we don't get exactly what we want. Without these changes, the following oops can occasionally be observed, particularly if some printks are inserted into the delivery path: general protection fault: 0000 [#1] SMP Modules linked in: kafs(E) af_rxrpc(E) [last unloaded: af_rxrpc] CPU: 0 PID: 1305 Comm: kworker/u8:3 Tainted: G E 4.7.0-fsdevel+ #1303 Hardware name: ASUS All Series/H97-PLUS, BIOS 2306 10/09/2014 Workqueue: kafsd afs_async_workfn [kafs] task: ffff88040be041c0 ti: ffff88040c070000 task.ti: ffff88040c070000 RIP: 0010:[<ffffffff8108fd3c>] [<ffffffff8108fd3c>] __lock_acquire+0xcf/0x15a1 RSP: 0018:ffff88040c073bc0 EFLAGS: 00010002 RAX: 6b6b6b6b6b6b6b6b RBX: 0000000000000000 RCX: ffff88040d29a710 RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffff88040d29a710 RBP: ffff88040c073c70 R08: 0000000000000001 R09: 0000000000000001 R10: 0000000000000001 R11: 0000000000000000 R12: 0000000000000000 R13: 0000000000000000 R14: ffff88040be041c0 R15: ffffffff814c928f FS: 0000000000000000(0000) GS:ffff88041fa00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fa4595f4750 CR3: 0000000001c14000 CR4: 00000000001406f0 Stack: 0000000000000006 000000000be04930 0000000000000000 ffff880400000000 ffff880400000000 ffffffff8108f847 ffff88040be041c0 ffffffff81050446 ffff8803fc08a920 ffff8803fc08a958 ffff88040be041c0 ffff88040c073c38 Call Trace: [<ffffffff8108f847>] ? mark_held_locks+0x5e/0x74 [<ffffffff81050446>] ? __local_bh_enable_ip+0x9b/0xa1 [<ffffffff8108f9ca>] ? trace_hardirqs_on_caller+0x16d/0x189 [<ffffffff810915f4>] lock_acquire+0x122/0x1b6 [<ffffffff810915f4>] ? lock_acquire+0x122/0x1b6 [<ffffffff814c928f>] ? skb_dequeue+0x18/0x61 [<ffffffff81609dbf>] _raw_spin_lock_irqsave+0x35/0x49 [<ffffffff814c928f>] ? skb_dequeue+0x18/0x61 [<ffffffff814c928f>] skb_dequeue+0x18/0x61 [<ffffffffa009aa92>] afs_deliver_to_call+0x344/0x39d [kafs] [<ffffffffa009ab37>] afs_process_async_call+0x4c/0xd5 [kafs] [<ffffffffa0099e9c>] afs_async_workfn+0xe/0x10 [kafs] [<ffffffff81063a3a>] process_one_work+0x29d/0x57c [<ffffffff81064ac2>] worker_thread+0x24a/0x385 [<ffffffff81064878>] ? rescuer_thread+0x2d0/0x2d0 [<ffffffff810696f5>] kthread+0xf3/0xfb [<ffffffff8160a6ff>] ret_from_fork+0x1f/0x40 [<ffffffff81069602>] ? kthread_create_on_node+0x1cf/0x1cf Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> diff 372ee163 Wed Aug 03 07:11:40 MDT 2016 David Howells <dhowells@redhat.com> rxrpc: Fix races between skb free, ACK generation and replying Inside the kafs filesystem it is possible to occasionally have a call processed and terminated before we've had a chance to check whether we need to clean up the rx queue for that call because afs_send_simple_reply() ends the call when it is done, but this is done in a workqueue item that might happen to run to completion before afs_deliver_to_call() completes. Further, it is possible for rxrpc_kernel_send_data() to be called to send a reply before the last request-phase data skb is released. The rxrpc skb destructor is where the ACK processing is done and the call state is advanced upon release of the last skb. ACK generation is also deferred to a work item because it's possible that the skb destructor is not called in a context where kernel_sendmsg() can be invoked. To this end, the following changes are made: (1) kernel_rxrpc_data_consumed() is added. This should be called whenever an skb is emptied so as to crank the ACK and call states. This does not release the skb, however. kernel_rxrpc_free_skb() must now be called to achieve that. These together replace rxrpc_kernel_data_delivered(). (2) kernel_rxrpc_data_consumed() is wrapped by afs_data_consumed(). This makes afs_deliver_to_call() easier to work as the skb can simply be discarded unconditionally here without trying to work out what the return value of the ->deliver() function means. The ->deliver() functions can, via afs_data_complete(), afs_transfer_reply() and afs_extract_data() mark that an skb has been consumed (thereby cranking the state) without the need to conditionally free the skb to make sure the state is correct on an incoming call for when the call processor tries to send the reply. (3) rxrpc_recvmsg() now has to call kernel_rxrpc_data_consumed() when it has finished with a packet and MSG_PEEK isn't set. (4) rxrpc_packet_destructor() no longer calls rxrpc_hard_ACK_data(). Because of this, we no longer need to clear the destructor and put the call before we free the skb in cases where we don't want the ACK/call state to be cranked. (5) The ->deliver() call-type callbacks are made to return -EAGAIN rather than 0 if they expect more data (afs_extract_data() returns -EAGAIN to the delivery function already), and the caller is now responsible for producing an abort if that was the last packet. (6) There are many bits of unmarshalling code where: ret = afs_extract_data(call, skb, last, ...); switch (ret) { case 0: break; case -EAGAIN: return 0; default: return ret; } is to be found. As -EAGAIN can now be passed back to the caller, we now just return if ret < 0: ret = afs_extract_data(call, skb, last, ...); if (ret < 0) return ret; (7) Checks for trailing data and empty final data packets has been consolidated as afs_data_complete(). So: if (skb->len > 0) return -EBADMSG; if (!last) return 0; becomes: ret = afs_data_complete(call, skb, last); if (ret < 0) return ret; (8) afs_transfer_reply() now checks the amount of data it has against the amount of data desired and the amount of data in the skb and returns an error to induce an abort if we don't get exactly what we want. Without these changes, the following oops can occasionally be observed, particularly if some printks are inserted into the delivery path: general protection fault: 0000 [#1] SMP Modules linked in: kafs(E) af_rxrpc(E) [last unloaded: af_rxrpc] CPU: 0 PID: 1305 Comm: kworker/u8:3 Tainted: G E 4.7.0-fsdevel+ #1303 Hardware name: ASUS All Series/H97-PLUS, BIOS 2306 10/09/2014 Workqueue: kafsd afs_async_workfn [kafs] task: ffff88040be041c0 ti: ffff88040c070000 task.ti: ffff88040c070000 RIP: 0010:[<ffffffff8108fd3c>] [<ffffffff8108fd3c>] __lock_acquire+0xcf/0x15a1 RSP: 0018:ffff88040c073bc0 EFLAGS: 00010002 RAX: 6b6b6b6b6b6b6b6b RBX: 0000000000000000 RCX: ffff88040d29a710 RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffff88040d29a710 RBP: ffff88040c073c70 R08: 0000000000000001 R09: 0000000000000001 R10: 0000000000000001 R11: 0000000000000000 R12: 0000000000000000 R13: 0000000000000000 R14: ffff88040be041c0 R15: ffffffff814c928f FS: 0000000000000000(0000) GS:ffff88041fa00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fa4595f4750 CR3: 0000000001c14000 CR4: 00000000001406f0 Stack: 0000000000000006 000000000be04930 0000000000000000 ffff880400000000 ffff880400000000 ffffffff8108f847 ffff88040be041c0 ffffffff81050446 ffff8803fc08a920 ffff8803fc08a958 ffff88040be041c0 ffff88040c073c38 Call Trace: [<ffffffff8108f847>] ? mark_held_locks+0x5e/0x74 [<ffffffff81050446>] ? __local_bh_enable_ip+0x9b/0xa1 [<ffffffff8108f9ca>] ? trace_hardirqs_on_caller+0x16d/0x189 [<ffffffff810915f4>] lock_acquire+0x122/0x1b6 [<ffffffff810915f4>] ? lock_acquire+0x122/0x1b6 [<ffffffff814c928f>] ? skb_dequeue+0x18/0x61 [<ffffffff81609dbf>] _raw_spin_lock_irqsave+0x35/0x49 [<ffffffff814c928f>] ? skb_dequeue+0x18/0x61 [<ffffffff814c928f>] skb_dequeue+0x18/0x61 [<ffffffffa009aa92>] afs_deliver_to_call+0x344/0x39d [kafs] [<ffffffffa009ab37>] afs_process_async_call+0x4c/0xd5 [kafs] [<ffffffffa0099e9c>] afs_async_workfn+0xe/0x10 [kafs] [<ffffffff81063a3a>] process_one_work+0x29d/0x57c [<ffffffff81064ac2>] worker_thread+0x24a/0x385 [<ffffffff81064878>] ? rescuer_thread+0x2d0/0x2d0 [<ffffffff810696f5>] kthread+0xf3/0xfb [<ffffffff8160a6ff>] ret_from_fork+0x1f/0x40 [<ffffffff81069602>] ? kthread_create_on_node+0x1cf/0x1cf Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> diff 372ee163 Wed Aug 03 07:11:40 MDT 2016 David Howells <dhowells@redhat.com> rxrpc: Fix races between skb free, ACK generation and replying Inside the kafs filesystem it is possible to occasionally have a call processed and terminated before we've had a chance to check whether we need to clean up the rx queue for that call because afs_send_simple_reply() ends the call when it is done, but this is done in a workqueue item that might happen to run to completion before afs_deliver_to_call() completes. Further, it is possible for rxrpc_kernel_send_data() to be called to send a reply before the last request-phase data skb is released. The rxrpc skb destructor is where the ACK processing is done and the call state is advanced upon release of the last skb. ACK generation is also deferred to a work item because it's possible that the skb destructor is not called in a context where kernel_sendmsg() can be invoked. To this end, the following changes are made: (1) kernel_rxrpc_data_consumed() is added. This should be called whenever an skb is emptied so as to crank the ACK and call states. This does not release the skb, however. kernel_rxrpc_free_skb() must now be called to achieve that. These together replace rxrpc_kernel_data_delivered(). (2) kernel_rxrpc_data_consumed() is wrapped by afs_data_consumed(). This makes afs_deliver_to_call() easier to work as the skb can simply be discarded unconditionally here without trying to work out what the return value of the ->deliver() function means. The ->deliver() functions can, via afs_data_complete(), afs_transfer_reply() and afs_extract_data() mark that an skb has been consumed (thereby cranking the state) without the need to conditionally free the skb to make sure the state is correct on an incoming call for when the call processor tries to send the reply. (3) rxrpc_recvmsg() now has to call kernel_rxrpc_data_consumed() when it has finished with a packet and MSG_PEEK isn't set. (4) rxrpc_packet_destructor() no longer calls rxrpc_hard_ACK_data(). Because of this, we no longer need to clear the destructor and put the call before we free the skb in cases where we don't want the ACK/call state to be cranked. (5) The ->deliver() call-type callbacks are made to return -EAGAIN rather than 0 if they expect more data (afs_extract_data() returns -EAGAIN to the delivery function already), and the caller is now responsible for producing an abort if that was the last packet. (6) There are many bits of unmarshalling code where: ret = afs_extract_data(call, skb, last, ...); switch (ret) { case 0: break; case -EAGAIN: return 0; default: return ret; } is to be found. As -EAGAIN can now be passed back to the caller, we now just return if ret < 0: ret = afs_extract_data(call, skb, last, ...); if (ret < 0) return ret; (7) Checks for trailing data and empty final data packets has been consolidated as afs_data_complete(). So: if (skb->len > 0) return -EBADMSG; if (!last) return 0; becomes: ret = afs_data_complete(call, skb, last); if (ret < 0) return ret; (8) afs_transfer_reply() now checks the amount of data it has against the amount of data desired and the amount of data in the skb and returns an error to induce an abort if we don't get exactly what we want. Without these changes, the following oops can occasionally be observed, particularly if some printks are inserted into the delivery path: general protection fault: 0000 [#1] SMP Modules linked in: kafs(E) af_rxrpc(E) [last unloaded: af_rxrpc] CPU: 0 PID: 1305 Comm: kworker/u8:3 Tainted: G E 4.7.0-fsdevel+ #1303 Hardware name: ASUS All Series/H97-PLUS, BIOS 2306 10/09/2014 Workqueue: kafsd afs_async_workfn [kafs] task: ffff88040be041c0 ti: ffff88040c070000 task.ti: ffff88040c070000 RIP: 0010:[<ffffffff8108fd3c>] [<ffffffff8108fd3c>] __lock_acquire+0xcf/0x15a1 RSP: 0018:ffff88040c073bc0 EFLAGS: 00010002 RAX: 6b6b6b6b6b6b6b6b RBX: 0000000000000000 RCX: ffff88040d29a710 RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffff88040d29a710 RBP: ffff88040c073c70 R08: 0000000000000001 R09: 0000000000000001 R10: 0000000000000001 R11: 0000000000000000 R12: 0000000000000000 R13: 0000000000000000 R14: ffff88040be041c0 R15: ffffffff814c928f FS: 0000000000000000(0000) GS:ffff88041fa00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fa4595f4750 CR3: 0000000001c14000 CR4: 00000000001406f0 Stack: 0000000000000006 000000000be04930 0000000000000000 ffff880400000000 ffff880400000000 ffffffff8108f847 ffff88040be041c0 ffffffff81050446 ffff8803fc08a920 ffff8803fc08a958 ffff88040be041c0 ffff88040c073c38 Call Trace: [<ffffffff8108f847>] ? mark_held_locks+0x5e/0x74 [<ffffffff81050446>] ? __local_bh_enable_ip+0x9b/0xa1 [<ffffffff8108f9ca>] ? trace_hardirqs_on_caller+0x16d/0x189 [<ffffffff810915f4>] lock_acquire+0x122/0x1b6 [<ffffffff810915f4>] ? lock_acquire+0x122/0x1b6 [<ffffffff814c928f>] ? skb_dequeue+0x18/0x61 [<ffffffff81609dbf>] _raw_spin_lock_irqsave+0x35/0x49 [<ffffffff814c928f>] ? skb_dequeue+0x18/0x61 [<ffffffff814c928f>] skb_dequeue+0x18/0x61 [<ffffffffa009aa92>] afs_deliver_to_call+0x344/0x39d [kafs] [<ffffffffa009ab37>] afs_process_async_call+0x4c/0xd5 [kafs] [<ffffffffa0099e9c>] afs_async_workfn+0xe/0x10 [kafs] [<ffffffff81063a3a>] process_one_work+0x29d/0x57c [<ffffffff81064ac2>] worker_thread+0x24a/0x385 [<ffffffff81064878>] ? rescuer_thread+0x2d0/0x2d0 [<ffffffff810696f5>] kthread+0xf3/0xfb [<ffffffff8160a6ff>] ret_from_fork+0x1f/0x40 [<ffffffff81069602>] ? kthread_create_on_node+0x1cf/0x1cf Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> diff 372ee163 Wed Aug 03 07:11:40 MDT 2016 David Howells <dhowells@redhat.com> rxrpc: Fix races between skb free, ACK generation and replying Inside the kafs filesystem it is possible to occasionally have a call processed and terminated before we've had a chance to check whether we need to clean up the rx queue for that call because afs_send_simple_reply() ends the call when it is done, but this is done in a workqueue item that might happen to run to completion before afs_deliver_to_call() completes. Further, it is possible for rxrpc_kernel_send_data() to be called to send a reply before the last request-phase data skb is released. The rxrpc skb destructor is where the ACK processing is done and the call state is advanced upon release of the last skb. ACK generation is also deferred to a work item because it's possible that the skb destructor is not called in a context where kernel_sendmsg() can be invoked. To this end, the following changes are made: (1) kernel_rxrpc_data_consumed() is added. This should be called whenever an skb is emptied so as to crank the ACK and call states. This does not release the skb, however. kernel_rxrpc_free_skb() must now be called to achieve that. These together replace rxrpc_kernel_data_delivered(). (2) kernel_rxrpc_data_consumed() is wrapped by afs_data_consumed(). This makes afs_deliver_to_call() easier to work as the skb can simply be discarded unconditionally here without trying to work out what the return value of the ->deliver() function means. The ->deliver() functions can, via afs_data_complete(), afs_transfer_reply() and afs_extract_data() mark that an skb has been consumed (thereby cranking the state) without the need to conditionally free the skb to make sure the state is correct on an incoming call for when the call processor tries to send the reply. (3) rxrpc_recvmsg() now has to call kernel_rxrpc_data_consumed() when it has finished with a packet and MSG_PEEK isn't set. (4) rxrpc_packet_destructor() no longer calls rxrpc_hard_ACK_data(). Because of this, we no longer need to clear the destructor and put the call before we free the skb in cases where we don't want the ACK/call state to be cranked. (5) The ->deliver() call-type callbacks are made to return -EAGAIN rather than 0 if they expect more data (afs_extract_data() returns -EAGAIN to the delivery function already), and the caller is now responsible for producing an abort if that was the last packet. (6) There are many bits of unmarshalling code where: ret = afs_extract_data(call, skb, last, ...); switch (ret) { case 0: break; case -EAGAIN: return 0; default: return ret; } is to be found. As -EAGAIN can now be passed back to the caller, we now just return if ret < 0: ret = afs_extract_data(call, skb, last, ...); if (ret < 0) return ret; (7) Checks for trailing data and empty final data packets has been consolidated as afs_data_complete(). So: if (skb->len > 0) return -EBADMSG; if (!last) return 0; becomes: ret = afs_data_complete(call, skb, last); if (ret < 0) return ret; (8) afs_transfer_reply() now checks the amount of data it has against the amount of data desired and the amount of data in the skb and returns an error to induce an abort if we don't get exactly what we want. Without these changes, the following oops can occasionally be observed, particularly if some printks are inserted into the delivery path: general protection fault: 0000 [#1] SMP Modules linked in: kafs(E) af_rxrpc(E) [last unloaded: af_rxrpc] CPU: 0 PID: 1305 Comm: kworker/u8:3 Tainted: G E 4.7.0-fsdevel+ #1303 Hardware name: ASUS All Series/H97-PLUS, BIOS 2306 10/09/2014 Workqueue: kafsd afs_async_workfn [kafs] task: ffff88040be041c0 ti: ffff88040c070000 task.ti: ffff88040c070000 RIP: 0010:[<ffffffff8108fd3c>] [<ffffffff8108fd3c>] __lock_acquire+0xcf/0x15a1 RSP: 0018:ffff88040c073bc0 EFLAGS: 00010002 RAX: 6b6b6b6b6b6b6b6b RBX: 0000000000000000 RCX: ffff88040d29a710 RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffff88040d29a710 RBP: ffff88040c073c70 R08: 0000000000000001 R09: 0000000000000001 R10: 0000000000000001 R11: 0000000000000000 R12: 0000000000000000 R13: 0000000000000000 R14: ffff88040be041c0 R15: ffffffff814c928f FS: 0000000000000000(0000) GS:ffff88041fa00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fa4595f4750 CR3: 0000000001c14000 CR4: 00000000001406f0 Stack: 0000000000000006 000000000be04930 0000000000000000 ffff880400000000 ffff880400000000 ffffffff8108f847 ffff88040be041c0 ffffffff81050446 ffff8803fc08a920 ffff8803fc08a958 ffff88040be041c0 ffff88040c073c38 Call Trace: [<ffffffff8108f847>] ? mark_held_locks+0x5e/0x74 [<ffffffff81050446>] ? __local_bh_enable_ip+0x9b/0xa1 [<ffffffff8108f9ca>] ? trace_hardirqs_on_caller+0x16d/0x189 [<ffffffff810915f4>] lock_acquire+0x122/0x1b6 [<ffffffff810915f4>] ? lock_acquire+0x122/0x1b6 [<ffffffff814c928f>] ? skb_dequeue+0x18/0x61 [<ffffffff81609dbf>] _raw_spin_lock_irqsave+0x35/0x49 [<ffffffff814c928f>] ? skb_dequeue+0x18/0x61 [<ffffffff814c928f>] skb_dequeue+0x18/0x61 [<ffffffffa009aa92>] afs_deliver_to_call+0x344/0x39d [kafs] [<ffffffffa009ab37>] afs_process_async_call+0x4c/0xd5 [kafs] [<ffffffffa0099e9c>] afs_async_workfn+0xe/0x10 [kafs] [<ffffffff81063a3a>] process_one_work+0x29d/0x57c [<ffffffff81064ac2>] worker_thread+0x24a/0x385 [<ffffffff81064878>] ? rescuer_thread+0x2d0/0x2d0 [<ffffffff810696f5>] kthread+0xf3/0xfb [<ffffffff8160a6ff>] ret_from_fork+0x1f/0x40 [<ffffffff81069602>] ? kthread_create_on_node+0x1cf/0x1cf Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> diff 372ee163 Wed Aug 03 07:11:40 MDT 2016 David Howells <dhowells@redhat.com> rxrpc: Fix races between skb free, ACK generation and replying Inside the kafs filesystem it is possible to occasionally have a call processed and terminated before we've had a chance to check whether we need to clean up the rx queue for that call because afs_send_simple_reply() ends the call when it is done, but this is done in a workqueue item that might happen to run to completion before afs_deliver_to_call() completes. Further, it is possible for rxrpc_kernel_send_data() to be called to send a reply before the last request-phase data skb is released. The rxrpc skb destructor is where the ACK processing is done and the call state is advanced upon release of the last skb. ACK generation is also deferred to a work item because it's possible that the skb destructor is not called in a context where kernel_sendmsg() can be invoked. To this end, the following changes are made: (1) kernel_rxrpc_data_consumed() is added. This should be called whenever an skb is emptied so as to crank the ACK and call states. This does not release the skb, however. kernel_rxrpc_free_skb() must now be called to achieve that. These together replace rxrpc_kernel_data_delivered(). (2) kernel_rxrpc_data_consumed() is wrapped by afs_data_consumed(). This makes afs_deliver_to_call() easier to work as the skb can simply be discarded unconditionally here without trying to work out what the return value of the ->deliver() function means. The ->deliver() functions can, via afs_data_complete(), afs_transfer_reply() and afs_extract_data() mark that an skb has been consumed (thereby cranking the state) without the need to conditionally free the skb to make sure the state is correct on an incoming call for when the call processor tries to send the reply. (3) rxrpc_recvmsg() now has to call kernel_rxrpc_data_consumed() when it has finished with a packet and MSG_PEEK isn't set. (4) rxrpc_packet_destructor() no longer calls rxrpc_hard_ACK_data(). Because of this, we no longer need to clear the destructor and put the call before we free the skb in cases where we don't want the ACK/call state to be cranked. (5) The ->deliver() call-type callbacks are made to return -EAGAIN rather than 0 if they expect more data (afs_extract_data() returns -EAGAIN to the delivery function already), and the caller is now responsible for producing an abort if that was the last packet. (6) There are many bits of unmarshalling code where: ret = afs_extract_data(call, skb, last, ...); switch (ret) { case 0: break; case -EAGAIN: return 0; default: return ret; } is to be found. As -EAGAIN can now be passed back to the caller, we now just return if ret < 0: ret = afs_extract_data(call, skb, last, ...); if (ret < 0) return ret; (7) Checks for trailing data and empty final data packets has been consolidated as afs_data_complete(). So: if (skb->len > 0) return -EBADMSG; if (!last) return 0; becomes: ret = afs_data_complete(call, skb, last); if (ret < 0) return ret; (8) afs_transfer_reply() now checks the amount of data it has against the amount of data desired and the amount of data in the skb and returns an error to induce an abort if we don't get exactly what we want. Without these changes, the following oops can occasionally be observed, particularly if some printks are inserted into the delivery path: general protection fault: 0000 [#1] SMP Modules linked in: kafs(E) af_rxrpc(E) [last unloaded: af_rxrpc] CPU: 0 PID: 1305 Comm: kworker/u8:3 Tainted: G E 4.7.0-fsdevel+ #1303 Hardware name: ASUS All Series/H97-PLUS, BIOS 2306 10/09/2014 Workqueue: kafsd afs_async_workfn [kafs] task: ffff88040be041c0 ti: ffff88040c070000 task.ti: ffff88040c070000 RIP: 0010:[<ffffffff8108fd3c>] [<ffffffff8108fd3c>] __lock_acquire+0xcf/0x15a1 RSP: 0018:ffff88040c073bc0 EFLAGS: 00010002 RAX: 6b6b6b6b6b6b6b6b RBX: 0000000000000000 RCX: ffff88040d29a710 RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffff88040d29a710 RBP: ffff88040c073c70 R08: 0000000000000001 R09: 0000000000000001 R10: 0000000000000001 R11: 0000000000000000 R12: 0000000000000000 R13: 0000000000000000 R14: ffff88040be041c0 R15: ffffffff814c928f FS: 0000000000000000(0000) GS:ffff88041fa00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fa4595f4750 CR3: 0000000001c14000 CR4: 00000000001406f0 Stack: 0000000000000006 000000000be04930 0000000000000000 ffff880400000000 ffff880400000000 ffffffff8108f847 ffff88040be041c0 ffffffff81050446 ffff8803fc08a920 ffff8803fc08a958 ffff88040be041c0 ffff88040c073c38 Call Trace: [<ffffffff8108f847>] ? mark_held_locks+0x5e/0x74 [<ffffffff81050446>] ? __local_bh_enable_ip+0x9b/0xa1 [<ffffffff8108f9ca>] ? trace_hardirqs_on_caller+0x16d/0x189 [<ffffffff810915f4>] lock_acquire+0x122/0x1b6 [<ffffffff810915f4>] ? lock_acquire+0x122/0x1b6 [<ffffffff814c928f>] ? skb_dequeue+0x18/0x61 [<ffffffff81609dbf>] _raw_spin_lock_irqsave+0x35/0x49 [<ffffffff814c928f>] ? skb_dequeue+0x18/0x61 [<ffffffff814c928f>] skb_dequeue+0x18/0x61 [<ffffffffa009aa92>] afs_deliver_to_call+0x344/0x39d [kafs] [<ffffffffa009ab37>] afs_process_async_call+0x4c/0xd5 [kafs] [<ffffffffa0099e9c>] afs_async_workfn+0xe/0x10 [kafs] [<ffffffff81063a3a>] process_one_work+0x29d/0x57c [<ffffffff81064ac2>] worker_thread+0x24a/0x385 [<ffffffff81064878>] ? rescuer_thread+0x2d0/0x2d0 [<ffffffff810696f5>] kthread+0xf3/0xfb [<ffffffff8160a6ff>] ret_from_fork+0x1f/0x40 [<ffffffff81069602>] ? kthread_create_on_node+0x1cf/0x1cf Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> diff 372ee163 Wed Aug 03 07:11:40 MDT 2016 David Howells <dhowells@redhat.com> rxrpc: Fix races between skb free, ACK generation and replying Inside the kafs filesystem it is possible to occasionally have a call processed and terminated before we've had a chance to check whether we need to clean up the rx queue for that call because afs_send_simple_reply() ends the call when it is done, but this is done in a workqueue item that might happen to run to completion before afs_deliver_to_call() completes. Further, it is possible for rxrpc_kernel_send_data() to be called to send a reply before the last request-phase data skb is released. The rxrpc skb destructor is where the ACK processing is done and the call state is advanced upon release of the last skb. ACK generation is also deferred to a work item because it's possible that the skb destructor is not called in a context where kernel_sendmsg() can be invoked. To this end, the following changes are made: (1) kernel_rxrpc_data_consumed() is added. This should be called whenever an skb is emptied so as to crank the ACK and call states. This does not release the skb, however. kernel_rxrpc_free_skb() must now be called to achieve that. These together replace rxrpc_kernel_data_delivered(). (2) kernel_rxrpc_data_consumed() is wrapped by afs_data_consumed(). This makes afs_deliver_to_call() easier to work as the skb can simply be discarded unconditionally here without trying to work out what the return value of the ->deliver() function means. The ->deliver() functions can, via afs_data_complete(), afs_transfer_reply() and afs_extract_data() mark that an skb has been consumed (thereby cranking the state) without the need to conditionally free the skb to make sure the state is correct on an incoming call for when the call processor tries to send the reply. (3) rxrpc_recvmsg() now has to call kernel_rxrpc_data_consumed() when it has finished with a packet and MSG_PEEK isn't set. (4) rxrpc_packet_destructor() no longer calls rxrpc_hard_ACK_data(). Because of this, we no longer need to clear the destructor and put the call before we free the skb in cases where we don't want the ACK/call state to be cranked. (5) The ->deliver() call-type callbacks are made to return -EAGAIN rather than 0 if they expect more data (afs_extract_data() returns -EAGAIN to the delivery function already), and the caller is now responsible for producing an abort if that was the last packet. (6) There are many bits of unmarshalling code where: ret = afs_extract_data(call, skb, last, ...); switch (ret) { case 0: break; case -EAGAIN: return 0; default: return ret; } is to be found. As -EAGAIN can now be passed back to the caller, we now just return if ret < 0: ret = afs_extract_data(call, skb, last, ...); if (ret < 0) return ret; (7) Checks for trailing data and empty final data packets has been consolidated as afs_data_complete(). So: if (skb->len > 0) return -EBADMSG; if (!last) return 0; becomes: ret = afs_data_complete(call, skb, last); if (ret < 0) return ret; (8) afs_transfer_reply() now checks the amount of data it has against the amount of data desired and the amount of data in the skb and returns an error to induce an abort if we don't get exactly what we want. Without these changes, the following oops can occasionally be observed, particularly if some printks are inserted into the delivery path: general protection fault: 0000 [#1] SMP Modules linked in: kafs(E) af_rxrpc(E) [last unloaded: af_rxrpc] CPU: 0 PID: 1305 Comm: kworker/u8:3 Tainted: G E 4.7.0-fsdevel+ #1303 Hardware name: ASUS All Series/H97-PLUS, BIOS 2306 10/09/2014 Workqueue: kafsd afs_async_workfn [kafs] task: ffff88040be041c0 ti: ffff88040c070000 task.ti: ffff88040c070000 RIP: 0010:[<ffffffff8108fd3c>] [<ffffffff8108fd3c>] __lock_acquire+0xcf/0x15a1 RSP: 0018:ffff88040c073bc0 EFLAGS: 00010002 RAX: 6b6b6b6b6b6b6b6b RBX: 0000000000000000 RCX: ffff88040d29a710 RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffff88040d29a710 RBP: ffff88040c073c70 R08: 0000000000000001 R09: 0000000000000001 R10: 0000000000000001 R11: 0000000000000000 R12: 0000000000000000 R13: 0000000000000000 R14: ffff88040be041c0 R15: ffffffff814c928f FS: 0000000000000000(0000) GS:ffff88041fa00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fa4595f4750 CR3: 0000000001c14000 CR4: 00000000001406f0 Stack: 0000000000000006 000000000be04930 0000000000000000 ffff880400000000 ffff880400000000 ffffffff8108f847 ffff88040be041c0 ffffffff81050446 ffff8803fc08a920 ffff8803fc08a958 ffff88040be041c0 ffff88040c073c38 Call Trace: [<ffffffff8108f847>] ? mark_held_locks+0x5e/0x74 [<ffffffff81050446>] ? __local_bh_enable_ip+0x9b/0xa1 [<ffffffff8108f9ca>] ? trace_hardirqs_on_caller+0x16d/0x189 [<ffffffff810915f4>] lock_acquire+0x122/0x1b6 [<ffffffff810915f4>] ? lock_acquire+0x122/0x1b6 [<ffffffff814c928f>] ? skb_dequeue+0x18/0x61 [<ffffffff81609dbf>] _raw_spin_lock_irqsave+0x35/0x49 [<ffffffff814c928f>] ? skb_dequeue+0x18/0x61 [<ffffffff814c928f>] skb_dequeue+0x18/0x61 [<ffffffffa009aa92>] afs_deliver_to_call+0x344/0x39d [kafs] [<ffffffffa009ab37>] afs_process_async_call+0x4c/0xd5 [kafs] [<ffffffffa0099e9c>] afs_async_workfn+0xe/0x10 [kafs] [<ffffffff81063a3a>] process_one_work+0x29d/0x57c [<ffffffff81064ac2>] worker_thread+0x24a/0x385 [<ffffffff81064878>] ? rescuer_thread+0x2d0/0x2d0 [<ffffffff810696f5>] kthread+0xf3/0xfb [<ffffffff8160a6ff>] ret_from_fork+0x1f/0x40 [<ffffffff81069602>] ? kthread_create_on_node+0x1cf/0x1cf Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> diff 372ee163 Wed Aug 03 07:11:40 MDT 2016 David Howells <dhowells@redhat.com> rxrpc: Fix races between skb free, ACK generation and replying Inside the kafs filesystem it is possible to occasionally have a call processed and terminated before we've had a chance to check whether we need to clean up the rx queue for that call because afs_send_simple_reply() ends the call when it is done, but this is done in a workqueue item that might happen to run to completion before afs_deliver_to_call() completes. Further, it is possible for rxrpc_kernel_send_data() to be called to send a reply before the last request-phase data skb is released. The rxrpc skb destructor is where the ACK processing is done and the call state is advanced upon release of the last skb. ACK generation is also deferred to a work item because it's possible that the skb destructor is not called in a context where kernel_sendmsg() can be invoked. To this end, the following changes are made: (1) kernel_rxrpc_data_consumed() is added. This should be called whenever an skb is emptied so as to crank the ACK and call states. This does not release the skb, however. kernel_rxrpc_free_skb() must now be called to achieve that. These together replace rxrpc_kernel_data_delivered(). (2) kernel_rxrpc_data_consumed() is wrapped by afs_data_consumed(). This makes afs_deliver_to_call() easier to work as the skb can simply be discarded unconditionally here without trying to work out what the return value of the ->deliver() function means. The ->deliver() functions can, via afs_data_complete(), afs_transfer_reply() and afs_extract_data() mark that an skb has been consumed (thereby cranking the state) without the need to conditionally free the skb to make sure the state is correct on an incoming call for when the call processor tries to send the reply. (3) rxrpc_recvmsg() now has to call kernel_rxrpc_data_consumed() when it has finished with a packet and MSG_PEEK isn't set. (4) rxrpc_packet_destructor() no longer calls rxrpc_hard_ACK_data(). Because of this, we no longer need to clear the destructor and put the call before we free the skb in cases where we don't want the ACK/call state to be cranked. (5) The ->deliver() call-type callbacks are made to return -EAGAIN rather than 0 if they expect more data (afs_extract_data() returns -EAGAIN to the delivery function already), and the caller is now responsible for producing an abort if that was the last packet. (6) There are many bits of unmarshalling code where: ret = afs_extract_data(call, skb, last, ...); switch (ret) { case 0: break; case -EAGAIN: return 0; default: return ret; } is to be found. As -EAGAIN can now be passed back to the caller, we now just return if ret < 0: ret = afs_extract_data(call, skb, last, ...); if (ret < 0) return ret; (7) Checks for trailing data and empty final data packets has been consolidated as afs_data_complete(). So: if (skb->len > 0) return -EBADMSG; if (!last) return 0; becomes: ret = afs_data_complete(call, skb, last); if (ret < 0) return ret; (8) afs_transfer_reply() now checks the amount of data it has against the amount of data desired and the amount of data in the skb and returns an error to induce an abort if we don't get exactly what we want. Without these changes, the following oops can occasionally be observed, particularly if some printks are inserted into the delivery path: general protection fault: 0000 [#1] SMP Modules linked in: kafs(E) af_rxrpc(E) [last unloaded: af_rxrpc] CPU: 0 PID: 1305 Comm: kworker/u8:3 Tainted: G E 4.7.0-fsdevel+ #1303 Hardware name: ASUS All Series/H97-PLUS, BIOS 2306 10/09/2014 Workqueue: kafsd afs_async_workfn [kafs] task: ffff88040be041c0 ti: ffff88040c070000 task.ti: ffff88040c070000 RIP: 0010:[<ffffffff8108fd3c>] [<ffffffff8108fd3c>] __lock_acquire+0xcf/0x15a1 RSP: 0018:ffff88040c073bc0 EFLAGS: 00010002 RAX: 6b6b6b6b6b6b6b6b RBX: 0000000000000000 RCX: ffff88040d29a710 RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffff88040d29a710 RBP: ffff88040c073c70 R08: 0000000000000001 R09: 0000000000000001 R10: 0000000000000001 R11: 0000000000000000 R12: 0000000000000000 R13: 0000000000000000 R14: ffff88040be041c0 R15: ffffffff814c928f FS: 0000000000000000(0000) GS:ffff88041fa00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fa4595f4750 CR3: 0000000001c14000 CR4: 00000000001406f0 Stack: 0000000000000006 000000000be04930 0000000000000000 ffff880400000000 ffff880400000000 ffffffff8108f847 ffff88040be041c0 ffffffff81050446 ffff8803fc08a920 ffff8803fc08a958 ffff88040be041c0 ffff88040c073c38 Call Trace: [<ffffffff8108f847>] ? mark_held_locks+0x5e/0x74 [<ffffffff81050446>] ? __local_bh_enable_ip+0x9b/0xa1 [<ffffffff8108f9ca>] ? trace_hardirqs_on_caller+0x16d/0x189 [<ffffffff810915f4>] lock_acquire+0x122/0x1b6 [<ffffffff810915f4>] ? lock_acquire+0x122/0x1b6 [<ffffffff814c928f>] ? skb_dequeue+0x18/0x61 [<ffffffff81609dbf>] _raw_spin_lock_irqsave+0x35/0x49 [<ffffffff814c928f>] ? skb_dequeue+0x18/0x61 [<ffffffff814c928f>] skb_dequeue+0x18/0x61 [<ffffffffa009aa92>] afs_deliver_to_call+0x344/0x39d [kafs] [<ffffffffa009ab37>] afs_process_async_call+0x4c/0xd5 [kafs] [<ffffffffa0099e9c>] afs_async_workfn+0xe/0x10 [kafs] [<ffffffff81063a3a>] process_one_work+0x29d/0x57c [<ffffffff81064ac2>] worker_thread+0x24a/0x385 [<ffffffff81064878>] ? rescuer_thread+0x2d0/0x2d0 [<ffffffff810696f5>] kthread+0xf3/0xfb [<ffffffff8160a6ff>] ret_from_fork+0x1f/0x40 [<ffffffff81069602>] ? kthread_create_on_node+0x1cf/0x1cf Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> diff 372ee163 Wed Aug 03 07:11:40 MDT 2016 David Howells <dhowells@redhat.com> rxrpc: Fix races between skb free, ACK generation and replying Inside the kafs filesystem it is possible to occasionally have a call processed and terminated before we've had a chance to check whether we need to clean up the rx queue for that call because afs_send_simple_reply() ends the call when it is done, but this is done in a workqueue item that might happen to run to completion before afs_deliver_to_call() completes. Further, it is possible for rxrpc_kernel_send_data() to be called to send a reply before the last request-phase data skb is released. The rxrpc skb destructor is where the ACK processing is done and the call state is advanced upon release of the last skb. ACK generation is also deferred to a work item because it's possible that the skb destructor is not called in a context where kernel_sendmsg() can be invoked. To this end, the following changes are made: (1) kernel_rxrpc_data_consumed() is added. This should be called whenever an skb is emptied so as to crank the ACK and call states. This does not release the skb, however. kernel_rxrpc_free_skb() must now be called to achieve that. These together replace rxrpc_kernel_data_delivered(). (2) kernel_rxrpc_data_consumed() is wrapped by afs_data_consumed(). This makes afs_deliver_to_call() easier to work as the skb can simply be discarded unconditionally here without trying to work out what the return value of the ->deliver() function means. The ->deliver() functions can, via afs_data_complete(), afs_transfer_reply() and afs_extract_data() mark that an skb has been consumed (thereby cranking the state) without the need to conditionally free the skb to make sure the state is correct on an incoming call for when the call processor tries to send the reply. (3) rxrpc_recvmsg() now has to call kernel_rxrpc_data_consumed() when it has finished with a packet and MSG_PEEK isn't set. (4) rxrpc_packet_destructor() no longer calls rxrpc_hard_ACK_data(). Because of this, we no longer need to clear the destructor and put the call before we free the skb in cases where we don't want the ACK/call state to be cranked. (5) The ->deliver() call-type callbacks are made to return -EAGAIN rather than 0 if they expect more data (afs_extract_data() returns -EAGAIN to the delivery function already), and the caller is now responsible for producing an abort if that was the last packet. (6) There are many bits of unmarshalling code where: ret = afs_extract_data(call, skb, last, ...); switch (ret) { case 0: break; case -EAGAIN: return 0; default: return ret; } is to be found. As -EAGAIN can now be passed back to the caller, we now just return if ret < 0: ret = afs_extract_data(call, skb, last, ...); if (ret < 0) return ret; (7) Checks for trailing data and empty final data packets has been consolidated as afs_data_complete(). So: if (skb->len > 0) return -EBADMSG; if (!last) return 0; becomes: ret = afs_data_complete(call, skb, last); if (ret < 0) return ret; (8) afs_transfer_reply() now checks the amount of data it has against the amount of data desired and the amount of data in the skb and returns an error to induce an abort if we don't get exactly what we want. Without these changes, the following oops can occasionally be observed, particularly if some printks are inserted into the delivery path: general protection fault: 0000 [#1] SMP Modules linked in: kafs(E) af_rxrpc(E) [last unloaded: af_rxrpc] CPU: 0 PID: 1305 Comm: kworker/u8:3 Tainted: G E 4.7.0-fsdevel+ #1303 Hardware name: ASUS All Series/H97-PLUS, BIOS 2306 10/09/2014 Workqueue: kafsd afs_async_workfn [kafs] task: ffff88040be041c0 ti: ffff88040c070000 task.ti: ffff88040c070000 RIP: 0010:[<ffffffff8108fd3c>] [<ffffffff8108fd3c>] __lock_acquire+0xcf/0x15a1 RSP: 0018:ffff88040c073bc0 EFLAGS: 00010002 RAX: 6b6b6b6b6b6b6b6b RBX: 0000000000000000 RCX: ffff88040d29a710 RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffff88040d29a710 RBP: ffff88040c073c70 R08: 0000000000000001 R09: 0000000000000001 R10: 0000000000000001 R11: 0000000000000000 R12: 0000000000000000 R13: 0000000000000000 R14: ffff88040be041c0 R15: ffffffff814c928f FS: 0000000000000000(0000) GS:ffff88041fa00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fa4595f4750 CR3: 0000000001c14000 CR4: 00000000001406f0 Stack: 0000000000000006 000000000be04930 0000000000000000 ffff880400000000 ffff880400000000 ffffffff8108f847 ffff88040be041c0 ffffffff81050446 ffff8803fc08a920 ffff8803fc08a958 ffff88040be041c0 ffff88040c073c38 Call Trace: [<ffffffff8108f847>] ? mark_held_locks+0x5e/0x74 [<ffffffff81050446>] ? __local_bh_enable_ip+0x9b/0xa1 [<ffffffff8108f9ca>] ? trace_hardirqs_on_caller+0x16d/0x189 [<ffffffff810915f4>] lock_acquire+0x122/0x1b6 [<ffffffff810915f4>] ? lock_acquire+0x122/0x1b6 [<ffffffff814c928f>] ? skb_dequeue+0x18/0x61 [<ffffffff81609dbf>] _raw_spin_lock_irqsave+0x35/0x49 [<ffffffff814c928f>] ? skb_dequeue+0x18/0x61 [<ffffffff814c928f>] skb_dequeue+0x18/0x61 [<ffffffffa009aa92>] afs_deliver_to_call+0x344/0x39d [kafs] [<ffffffffa009ab37>] afs_process_async_call+0x4c/0xd5 [kafs] [<ffffffffa0099e9c>] afs_async_workfn+0xe/0x10 [kafs] [<ffffffff81063a3a>] process_one_work+0x29d/0x57c [<ffffffff81064ac2>] worker_thread+0x24a/0x385 [<ffffffff81064878>] ? rescuer_thread+0x2d0/0x2d0 [<ffffffff810696f5>] kthread+0xf3/0xfb [<ffffffff8160a6ff>] ret_from_fork+0x1f/0x40 [<ffffffff81069602>] ? kthread_create_on_node+0x1cf/0x1cf Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> diff 372ee163 Wed Aug 03 07:11:40 MDT 2016 David Howells <dhowells@redhat.com> rxrpc: Fix races between skb free, ACK generation and replying Inside the kafs filesystem it is possible to occasionally have a call processed and terminated before we've had a chance to check whether we need to clean up the rx queue for that call because afs_send_simple_reply() ends the call when it is done, but this is done in a workqueue item that might happen to run to completion before afs_deliver_to_call() completes. Further, it is possible for rxrpc_kernel_send_data() to be called to send a reply before the last request-phase data skb is released. The rxrpc skb destructor is where the ACK processing is done and the call state is advanced upon release of the last skb. ACK generation is also deferred to a work item because it's possible that the skb destructor is not called in a context where kernel_sendmsg() can be invoked. To this end, the following changes are made: (1) kernel_rxrpc_data_consumed() is added. This should be called whenever an skb is emptied so as to crank the ACK and call states. This does not release the skb, however. kernel_rxrpc_free_skb() must now be called to achieve that. These together replace rxrpc_kernel_data_delivered(). (2) kernel_rxrpc_data_consumed() is wrapped by afs_data_consumed(). This makes afs_deliver_to_call() easier to work as the skb can simply be discarded unconditionally here without trying to work out what the return value of the ->deliver() function means. The ->deliver() functions can, via afs_data_complete(), afs_transfer_reply() and afs_extract_data() mark that an skb has been consumed (thereby cranking the state) without the need to conditionally free the skb to make sure the state is correct on an incoming call for when the call processor tries to send the reply. (3) rxrpc_recvmsg() now has to call kernel_rxrpc_data_consumed() when it has finished with a packet and MSG_PEEK isn't set. (4) rxrpc_packet_destructor() no longer calls rxrpc_hard_ACK_data(). Because of this, we no longer need to clear the destructor and put the call before we free the skb in cases where we don't want the ACK/call state to be cranked. (5) The ->deliver() call-type callbacks are made to return -EAGAIN rather than 0 if they expect more data (afs_extract_data() returns -EAGAIN to the delivery function already), and the caller is now responsible for producing an abort if that was the last packet. (6) There are many bits of unmarshalling code where: ret = afs_extract_data(call, skb, last, ...); switch (ret) { case 0: break; case -EAGAIN: return 0; default: return ret; } is to be found. As -EAGAIN can now be passed back to the caller, we now just return if ret < 0: ret = afs_extract_data(call, skb, last, ...); if (ret < 0) return ret; (7) Checks for trailing data and empty final data packets has been consolidated as afs_data_complete(). So: if (skb->len > 0) return -EBADMSG; if (!last) return 0; becomes: ret = afs_data_complete(call, skb, last); if (ret < 0) return ret; (8) afs_transfer_reply() now checks the amount of data it has against the amount of data desired and the amount of data in the skb and returns an error to induce an abort if we don't get exactly what we want. Without these changes, the following oops can occasionally be observed, particularly if some printks are inserted into the delivery path: general protection fault: 0000 [#1] SMP Modules linked in: kafs(E) af_rxrpc(E) [last unloaded: af_rxrpc] CPU: 0 PID: 1305 Comm: kworker/u8:3 Tainted: G E 4.7.0-fsdevel+ #1303 Hardware name: ASUS All Series/H97-PLUS, BIOS 2306 10/09/2014 Workqueue: kafsd afs_async_workfn [kafs] task: ffff88040be041c0 ti: ffff88040c070000 task.ti: ffff88040c070000 RIP: 0010:[<ffffffff8108fd3c>] [<ffffffff8108fd3c>] __lock_acquire+0xcf/0x15a1 RSP: 0018:ffff88040c073bc0 EFLAGS: 00010002 RAX: 6b6b6b6b6b6b6b6b RBX: 0000000000000000 RCX: ffff88040d29a710 RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffff88040d29a710 RBP: ffff88040c073c70 R08: 0000000000000001 R09: 0000000000000001 R10: 0000000000000001 R11: 0000000000000000 R12: 0000000000000000 R13: 0000000000000000 R14: ffff88040be041c0 R15: ffffffff814c928f FS: 0000000000000000(0000) GS:ffff88041fa00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fa4595f4750 CR3: 0000000001c14000 CR4: 00000000001406f0 Stack: 0000000000000006 000000000be04930 0000000000000000 ffff880400000000 ffff880400000000 ffffffff8108f847 ffff88040be041c0 ffffffff81050446 ffff8803fc08a920 ffff8803fc08a958 ffff88040be041c0 ffff88040c073c38 Call Trace: [<ffffffff8108f847>] ? mark_held_locks+0x5e/0x74 [<ffffffff81050446>] ? __local_bh_enable_ip+0x9b/0xa1 [<ffffffff8108f9ca>] ? trace_hardirqs_on_caller+0x16d/0x189 [<ffffffff810915f4>] lock_acquire+0x122/0x1b6 [<ffffffff810915f4>] ? lock_acquire+0x122/0x1b6 [<ffffffff814c928f>] ? skb_dequeue+0x18/0x61 [<ffffffff81609dbf>] _raw_spin_lock_irqsave+0x35/0x49 [<ffffffff814c928f>] ? skb_dequeue+0x18/0x61 [<ffffffff814c928f>] skb_dequeue+0x18/0x61 [<ffffffffa009aa92>] afs_deliver_to_call+0x344/0x39d [kafs] [<ffffffffa009ab37>] afs_process_async_call+0x4c/0xd5 [kafs] [<ffffffffa0099e9c>] afs_async_workfn+0xe/0x10 [kafs] [<ffffffff81063a3a>] process_one_work+0x29d/0x57c [<ffffffff81064ac2>] worker_thread+0x24a/0x385 [<ffffffff81064878>] ? rescuer_thread+0x2d0/0x2d0 [<ffffffff810696f5>] kthread+0xf3/0xfb [<ffffffff8160a6ff>] ret_from_fork+0x1f/0x40 [<ffffffff81069602>] ? kthread_create_on_node+0x1cf/0x1cf Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> diff 372ee163 Wed Aug 03 07:11:40 MDT 2016 David Howells <dhowells@redhat.com> rxrpc: Fix races between skb free, ACK generation and replying Inside the kafs filesystem it is possible to occasionally have a call processed and terminated before we've had a chance to check whether we need to clean up the rx queue for that call because afs_send_simple_reply() ends the call when it is done, but this is done in a workqueue item that might happen to run to completion before afs_deliver_to_call() completes. Further, it is possible for rxrpc_kernel_send_data() to be called to send a reply before the last request-phase data skb is released. The rxrpc skb destructor is where the ACK processing is done and the call state is advanced upon release of the last skb. ACK generation is also deferred to a work item because it's possible that the skb destructor is not called in a context where kernel_sendmsg() can be invoked. To this end, the following changes are made: (1) kernel_rxrpc_data_consumed() is added. This should be called whenever an skb is emptied so as to crank the ACK and call states. This does not release the skb, however. kernel_rxrpc_free_skb() must now be called to achieve that. These together replace rxrpc_kernel_data_delivered(). (2) kernel_rxrpc_data_consumed() is wrapped by afs_data_consumed(). This makes afs_deliver_to_call() easier to work as the skb can simply be discarded unconditionally here without trying to work out what the return value of the ->deliver() function means. The ->deliver() functions can, via afs_data_complete(), afs_transfer_reply() and afs_extract_data() mark that an skb has been consumed (thereby cranking the state) without the need to conditionally free the skb to make sure the state is correct on an incoming call for when the call processor tries to send the reply. (3) rxrpc_recvmsg() now has to call kernel_rxrpc_data_consumed() when it has finished with a packet and MSG_PEEK isn't set. (4) rxrpc_packet_destructor() no longer calls rxrpc_hard_ACK_data(). Because of this, we no longer need to clear the destructor and put the call before we free the skb in cases where we don't want the ACK/call state to be cranked. (5) The ->deliver() call-type callbacks are made to return -EAGAIN rather than 0 if they expect more data (afs_extract_data() returns -EAGAIN to the delivery function already), and the caller is now responsible for producing an abort if that was the last packet. (6) There are many bits of unmarshalling code where: ret = afs_extract_data(call, skb, last, ...); switch (ret) { case 0: break; case -EAGAIN: return 0; default: return ret; } is to be found. As -EAGAIN can now be passed back to the caller, we now just return if ret < 0: ret = afs_extract_data(call, skb, last, ...); if (ret < 0) return ret; (7) Checks for trailing data and empty final data packets has been consolidated as afs_data_complete(). So: if (skb->len > 0) return -EBADMSG; if (!last) return 0; becomes: ret = afs_data_complete(call, skb, last); if (ret < 0) return ret; (8) afs_transfer_reply() now checks the amount of data it has against the amount of data desired and the amount of data in the skb and returns an error to induce an abort if we don't get exactly what we want. Without these changes, the following oops can occasionally be observed, particularly if some printks are inserted into the delivery path: general protection fault: 0000 [#1] SMP Modules linked in: kafs(E) af_rxrpc(E) [last unloaded: af_rxrpc] CPU: 0 PID: 1305 Comm: kworker/u8:3 Tainted: G E 4.7.0-fsdevel+ #1303 Hardware name: ASUS All Series/H97-PLUS, BIOS 2306 10/09/2014 Workqueue: kafsd afs_async_workfn [kafs] task: ffff88040be041c0 ti: ffff88040c070000 task.ti: ffff88040c070000 RIP: 0010:[<ffffffff8108fd3c>] [<ffffffff8108fd3c>] __lock_acquire+0xcf/0x15a1 RSP: 0018:ffff88040c073bc0 EFLAGS: 00010002 RAX: 6b6b6b6b6b6b6b6b RBX: 0000000000000000 RCX: ffff88040d29a710 RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffff88040d29a710 RBP: ffff88040c073c70 R08: 0000000000000001 R09: 0000000000000001 R10: 0000000000000001 R11: 0000000000000000 R12: 0000000000000000 R13: 0000000000000000 R14: ffff88040be041c0 R15: ffffffff814c928f FS: 0000000000000000(0000) GS:ffff88041fa00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fa4595f4750 CR3: 0000000001c14000 CR4: 00000000001406f0 Stack: 0000000000000006 000000000be04930 0000000000000000 ffff880400000000 ffff880400000000 ffffffff8108f847 ffff88040be041c0 ffffffff81050446 ffff8803fc08a920 ffff8803fc08a958 ffff88040be041c0 ffff88040c073c38 Call Trace: [<ffffffff8108f847>] ? mark_held_locks+0x5e/0x74 [<ffffffff81050446>] ? __local_bh_enable_ip+0x9b/0xa1 [<ffffffff8108f9ca>] ? trace_hardirqs_on_caller+0x16d/0x189 [<ffffffff810915f4>] lock_acquire+0x122/0x1b6 [<ffffffff810915f4>] ? lock_acquire+0x122/0x1b6 [<ffffffff814c928f>] ? skb_dequeue+0x18/0x61 [<ffffffff81609dbf>] _raw_spin_lock_irqsave+0x35/0x49 [<ffffffff814c928f>] ? skb_dequeue+0x18/0x61 [<ffffffff814c928f>] skb_dequeue+0x18/0x61 [<ffffffffa009aa92>] afs_deliver_to_call+0x344/0x39d [kafs] [<ffffffffa009ab37>] afs_process_async_call+0x4c/0xd5 [kafs] [<ffffffffa0099e9c>] afs_async_workfn+0xe/0x10 [kafs] [<ffffffff81063a3a>] process_one_work+0x29d/0x57c [<ffffffff81064ac2>] worker_thread+0x24a/0x385 [<ffffffff81064878>] ? rescuer_thread+0x2d0/0x2d0 [<ffffffff810696f5>] kthread+0xf3/0xfb [<ffffffff8160a6ff>] ret_from_fork+0x1f/0x40 [<ffffffff81069602>] ? kthread_create_on_node+0x1cf/0x1cf Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> diff 372ee163 Wed Aug 03 07:11:40 MDT 2016 David Howells <dhowells@redhat.com> rxrpc: Fix races between skb free, ACK generation and replying Inside the kafs filesystem it is possible to occasionally have a call processed and terminated before we've had a chance to check whether we need to clean up the rx queue for that call because afs_send_simple_reply() ends the call when it is done, but this is done in a workqueue item that might happen to run to completion before afs_deliver_to_call() completes. Further, it is possible for rxrpc_kernel_send_data() to be called to send a reply before the last request-phase data skb is released. The rxrpc skb destructor is where the ACK processing is done and the call state is advanced upon release of the last skb. ACK generation is also deferred to a work item because it's possible that the skb destructor is not called in a context where kernel_sendmsg() can be invoked. To this end, the following changes are made: (1) kernel_rxrpc_data_consumed() is added. This should be called whenever an skb is emptied so as to crank the ACK and call states. This does not release the skb, however. kernel_rxrpc_free_skb() must now be called to achieve that. These together replace rxrpc_kernel_data_delivered(). (2) kernel_rxrpc_data_consumed() is wrapped by afs_data_consumed(). This makes afs_deliver_to_call() easier to work as the skb can simply be discarded unconditionally here without trying to work out what the return value of the ->deliver() function means. The ->deliver() functions can, via afs_data_complete(), afs_transfer_reply() and afs_extract_data() mark that an skb has been consumed (thereby cranking the state) without the need to conditionally free the skb to make sure the state is correct on an incoming call for when the call processor tries to send the reply. (3) rxrpc_recvmsg() now has to call kernel_rxrpc_data_consumed() when it has finished with a packet and MSG_PEEK isn't set. (4) rxrpc_packet_destructor() no longer calls rxrpc_hard_ACK_data(). Because of this, we no longer need to clear the destructor and put the call before we free the skb in cases where we don't want the ACK/call state to be cranked. (5) The ->deliver() call-type callbacks are made to return -EAGAIN rather than 0 if they expect more data (afs_extract_data() returns -EAGAIN to the delivery function already), and the caller is now responsible for producing an abort if that was the last packet. (6) There are many bits of unmarshalling code where: ret = afs_extract_data(call, skb, last, ...); switch (ret) { case 0: break; case -EAGAIN: return 0; default: return ret; } is to be found. As -EAGAIN can now be passed back to the caller, we now just return if ret < 0: ret = afs_extract_data(call, skb, last, ...); if (ret < 0) return ret; (7) Checks for trailing data and empty final data packets has been consolidated as afs_data_complete(). So: if (skb->len > 0) return -EBADMSG; if (!last) return 0; becomes: ret = afs_data_complete(call, skb, last); if (ret < 0) return ret; (8) afs_transfer_reply() now checks the amount of data it has against the amount of data desired and the amount of data in the skb and returns an error to induce an abort if we don't get exactly what we want. Without these changes, the following oops can occasionally be observed, particularly if some printks are inserted into the delivery path: general protection fault: 0000 [#1] SMP Modules linked in: kafs(E) af_rxrpc(E) [last unloaded: af_rxrpc] CPU: 0 PID: 1305 Comm: kworker/u8:3 Tainted: G E 4.7.0-fsdevel+ #1303 Hardware name: ASUS All Series/H97-PLUS, BIOS 2306 10/09/2014 Workqueue: kafsd afs_async_workfn [kafs] task: ffff88040be041c0 ti: ffff88040c070000 task.ti: ffff88040c070000 RIP: 0010:[<ffffffff8108fd3c>] [<ffffffff8108fd3c>] __lock_acquire+0xcf/0x15a1 RSP: 0018:ffff88040c073bc0 EFLAGS: 00010002 RAX: 6b6b6b6b6b6b6b6b RBX: 0000000000000000 RCX: ffff88040d29a710 RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffff88040d29a710 RBP: ffff88040c073c70 R08: 0000000000000001 R09: 0000000000000001 R10: 0000000000000001 R11: 0000000000000000 R12: 0000000000000000 R13: 0000000000000000 R14: ffff88040be041c0 R15: ffffffff814c928f FS: 0000000000000000(0000) GS:ffff88041fa00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fa4595f4750 CR3: 0000000001c14000 CR4: 00000000001406f0 Stack: 0000000000000006 000000000be04930 0000000000000000 ffff880400000000 ffff880400000000 ffffffff8108f847 ffff88040be041c0 ffffffff81050446 ffff8803fc08a920 ffff8803fc08a958 ffff88040be041c0 ffff88040c073c38 Call Trace: [<ffffffff8108f847>] ? mark_held_locks+0x5e/0x74 [<ffffffff81050446>] ? __local_bh_enable_ip+0x9b/0xa1 [<ffffffff8108f9ca>] ? trace_hardirqs_on_caller+0x16d/0x189 [<ffffffff810915f4>] lock_acquire+0x122/0x1b6 [<ffffffff810915f4>] ? lock_acquire+0x122/0x1b6 [<ffffffff814c928f>] ? skb_dequeue+0x18/0x61 [<ffffffff81609dbf>] _raw_spin_lock_irqsave+0x35/0x49 [<ffffffff814c928f>] ? skb_dequeue+0x18/0x61 [<ffffffff814c928f>] skb_dequeue+0x18/0x61 [<ffffffffa009aa92>] afs_deliver_to_call+0x344/0x39d [kafs] [<ffffffffa009ab37>] afs_process_async_call+0x4c/0xd5 [kafs] [<ffffffffa0099e9c>] afs_async_workfn+0xe/0x10 [kafs] [<ffffffff81063a3a>] process_one_work+0x29d/0x57c [<ffffffff81064ac2>] worker_thread+0x24a/0x385 [<ffffffff81064878>] ? rescuer_thread+0x2d0/0x2d0 [<ffffffff810696f5>] kthread+0xf3/0xfb [<ffffffff8160a6ff>] ret_from_fork+0x1f/0x40 [<ffffffff81069602>] ? kthread_create_on_node+0x1cf/0x1cf Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> diff 372ee163 Wed Aug 03 07:11:40 MDT 2016 David Howells <dhowells@redhat.com> rxrpc: Fix races between skb free, ACK generation and replying Inside the kafs filesystem it is possible to occasionally have a call processed and terminated before we've had a chance to check whether we need to clean up the rx queue for that call because afs_send_simple_reply() ends the call when it is done, but this is done in a workqueue item that might happen to run to completion before afs_deliver_to_call() completes. Further, it is possible for rxrpc_kernel_send_data() to be called to send a reply before the last request-phase data skb is released. The rxrpc skb destructor is where the ACK processing is done and the call state is advanced upon release of the last skb. ACK generation is also deferred to a work item because it's possible that the skb destructor is not called in a context where kernel_sendmsg() can be invoked. To this end, the following changes are made: (1) kernel_rxrpc_data_consumed() is added. This should be called whenever an skb is emptied so as to crank the ACK and call states. This does not release the skb, however. kernel_rxrpc_free_skb() must now be called to achieve that. These together replace rxrpc_kernel_data_delivered(). (2) kernel_rxrpc_data_consumed() is wrapped by afs_data_consumed(). This makes afs_deliver_to_call() easier to work as the skb can simply be discarded unconditionally here without trying to work out what the return value of the ->deliver() function means. The ->deliver() functions can, via afs_data_complete(), afs_transfer_reply() and afs_extract_data() mark that an skb has been consumed (thereby cranking the state) without the need to conditionally free the skb to make sure the state is correct on an incoming call for when the call processor tries to send the reply. (3) rxrpc_recvmsg() now has to call kernel_rxrpc_data_consumed() when it has finished with a packet and MSG_PEEK isn't set. (4) rxrpc_packet_destructor() no longer calls rxrpc_hard_ACK_data(). Because of this, we no longer need to clear the destructor and put the call before we free the skb in cases where we don't want the ACK/call state to be cranked. (5) The ->deliver() call-type callbacks are made to return -EAGAIN rather than 0 if they expect more data (afs_extract_data() returns -EAGAIN to the delivery function already), and the caller is now responsible for producing an abort if that was the last packet. (6) There are many bits of unmarshalling code where: ret = afs_extract_data(call, skb, last, ...); switch (ret) { case 0: break; case -EAGAIN: return 0; default: return ret; } is to be found. As -EAGAIN can now be passed back to the caller, we now just return if ret < 0: ret = afs_extract_data(call, skb, last, ...); if (ret < 0) return ret; (7) Checks for trailing data and empty final data packets has been consolidated as afs_data_complete(). So: if (skb->len > 0) return -EBADMSG; if (!last) return 0; becomes: ret = afs_data_complete(call, skb, last); if (ret < 0) return ret; (8) afs_transfer_reply() now checks the amount of data it has against the amount of data desired and the amount of data in the skb and returns an error to induce an abort if we don't get exactly what we want. Without these changes, the following oops can occasionally be observed, particularly if some printks are inserted into the delivery path: general protection fault: 0000 [#1] SMP Modules linked in: kafs(E) af_rxrpc(E) [last unloaded: af_rxrpc] CPU: 0 PID: 1305 Comm: kworker/u8:3 Tainted: G E 4.7.0-fsdevel+ #1303 Hardware name: ASUS All Series/H97-PLUS, BIOS 2306 10/09/2014 Workqueue: kafsd afs_async_workfn [kafs] task: ffff88040be041c0 ti: ffff88040c070000 task.ti: ffff88040c070000 RIP: 0010:[<ffffffff8108fd3c>] [<ffffffff8108fd3c>] __lock_acquire+0xcf/0x15a1 RSP: 0018:ffff88040c073bc0 EFLAGS: 00010002 RAX: 6b6b6b6b6b6b6b6b RBX: 0000000000000000 RCX: ffff88040d29a710 RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffff88040d29a710 RBP: ffff88040c073c70 R08: 0000000000000001 R09: 0000000000000001 R10: 0000000000000001 R11: 0000000000000000 R12: 0000000000000000 R13: 0000000000000000 R14: ffff88040be041c0 R15: ffffffff814c928f FS: 0000000000000000(0000) GS:ffff88041fa00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fa4595f4750 CR3: 0000000001c14000 CR4: 00000000001406f0 Stack: 0000000000000006 000000000be04930 0000000000000000 ffff880400000000 ffff880400000000 ffffffff8108f847 ffff88040be041c0 ffffffff81050446 ffff8803fc08a920 ffff8803fc08a958 ffff88040be041c0 ffff88040c073c38 Call Trace: [<ffffffff8108f847>] ? mark_held_locks+0x5e/0x74 [<ffffffff81050446>] ? __local_bh_enable_ip+0x9b/0xa1 [<ffffffff8108f9ca>] ? trace_hardirqs_on_caller+0x16d/0x189 [<ffffffff810915f4>] lock_acquire+0x122/0x1b6 [<ffffffff810915f4>] ? lock_acquire+0x122/0x1b6 [<ffffffff814c928f>] ? skb_dequeue+0x18/0x61 [<ffffffff81609dbf>] _raw_spin_lock_irqsave+0x35/0x49 [<ffffffff814c928f>] ? skb_dequeue+0x18/0x61 [<ffffffff814c928f>] skb_dequeue+0x18/0x61 [<ffffffffa009aa92>] afs_deliver_to_call+0x344/0x39d [kafs] [<ffffffffa009ab37>] afs_process_async_call+0x4c/0xd5 [kafs] [<ffffffffa0099e9c>] afs_async_workfn+0xe/0x10 [kafs] [<ffffffff81063a3a>] process_one_work+0x29d/0x57c [<ffffffff81064ac2>] worker_thread+0x24a/0x385 [<ffffffff81064878>] ? rescuer_thread+0x2d0/0x2d0 [<ffffffff810696f5>] kthread+0xf3/0xfb [<ffffffff8160a6ff>] ret_from_fork+0x1f/0x40 [<ffffffff81069602>] ? kthread_create_on_node+0x1cf/0x1cf Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> diff 372ee163 Wed Aug 03 07:11:40 MDT 2016 David Howells <dhowells@redhat.com> rxrpc: Fix races between skb free, ACK generation and replying Inside the kafs filesystem it is possible to occasionally have a call processed and terminated before we've had a chance to check whether we need to clean up the rx queue for that call because afs_send_simple_reply() ends the call when it is done, but this is done in a workqueue item that might happen to run to completion before afs_deliver_to_call() completes. Further, it is possible for rxrpc_kernel_send_data() to be called to send a reply before the last request-phase data skb is released. The rxrpc skb destructor is where the ACK processing is done and the call state is advanced upon release of the last skb. ACK generation is also deferred to a work item because it's possible that the skb destructor is not called in a context where kernel_sendmsg() can be invoked. To this end, the following changes are made: (1) kernel_rxrpc_data_consumed() is added. This should be called whenever an skb is emptied so as to crank the ACK and call states. This does not release the skb, however. kernel_rxrpc_free_skb() must now be called to achieve that. These together replace rxrpc_kernel_data_delivered(). (2) kernel_rxrpc_data_consumed() is wrapped by afs_data_consumed(). This makes afs_deliver_to_call() easier to work as the skb can simply be discarded unconditionally here without trying to work out what the return value of the ->deliver() function means. The ->deliver() functions can, via afs_data_complete(), afs_transfer_reply() and afs_extract_data() mark that an skb has been consumed (thereby cranking the state) without the need to conditionally free the skb to make sure the state is correct on an incoming call for when the call processor tries to send the reply. (3) rxrpc_recvmsg() now has to call kernel_rxrpc_data_consumed() when it has finished with a packet and MSG_PEEK isn't set. (4) rxrpc_packet_destructor() no longer calls rxrpc_hard_ACK_data(). Because of this, we no longer need to clear the destructor and put the call before we free the skb in cases where we don't want the ACK/call state to be cranked. (5) The ->deliver() call-type callbacks are made to return -EAGAIN rather than 0 if they expect more data (afs_extract_data() returns -EAGAIN to the delivery function already), and the caller is now responsible for producing an abort if that was the last packet. (6) There are many bits of unmarshalling code where: ret = afs_extract_data(call, skb, last, ...); switch (ret) { case 0: break; case -EAGAIN: return 0; default: return ret; } is to be found. As -EAGAIN can now be passed back to the caller, we now just return if ret < 0: ret = afs_extract_data(call, skb, last, ...); if (ret < 0) return ret; (7) Checks for trailing data and empty final data packets has been consolidated as afs_data_complete(). So: if (skb->len > 0) return -EBADMSG; if (!last) return 0; becomes: ret = afs_data_complete(call, skb, last); if (ret < 0) return ret; (8) afs_transfer_reply() now checks the amount of data it has against the amount of data desired and the amount of data in the skb and returns an error to induce an abort if we don't get exactly what we want. Without these changes, the following oops can occasionally be observed, particularly if some printks are inserted into the delivery path: general protection fault: 0000 [#1] SMP Modules linked in: kafs(E) af_rxrpc(E) [last unloaded: af_rxrpc] CPU: 0 PID: 1305 Comm: kworker/u8:3 Tainted: G E 4.7.0-fsdevel+ #1303 Hardware name: ASUS All Series/H97-PLUS, BIOS 2306 10/09/2014 Workqueue: kafsd afs_async_workfn [kafs] task: ffff88040be041c0 ti: ffff88040c070000 task.ti: ffff88040c070000 RIP: 0010:[<ffffffff8108fd3c>] [<ffffffff8108fd3c>] __lock_acquire+0xcf/0x15a1 RSP: 0018:ffff88040c073bc0 EFLAGS: 00010002 RAX: 6b6b6b6b6b6b6b6b RBX: 0000000000000000 RCX: ffff88040d29a710 RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffff88040d29a710 RBP: ffff88040c073c70 R08: 0000000000000001 R09: 0000000000000001 R10: 0000000000000001 R11: 0000000000000000 R12: 0000000000000000 R13: 0000000000000000 R14: ffff88040be041c0 R15: ffffffff814c928f FS: 0000000000000000(0000) GS:ffff88041fa00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fa4595f4750 CR3: 0000000001c14000 CR4: 00000000001406f0 Stack: 0000000000000006 000000000be04930 0000000000000000 ffff880400000000 ffff880400000000 ffffffff8108f847 ffff88040be041c0 ffffffff81050446 ffff8803fc08a920 ffff8803fc08a958 ffff88040be041c0 ffff88040c073c38 Call Trace: [<ffffffff8108f847>] ? mark_held_locks+0x5e/0x74 [<ffffffff81050446>] ? __local_bh_enable_ip+0x9b/0xa1 [<ffffffff8108f9ca>] ? trace_hardirqs_on_caller+0x16d/0x189 [<ffffffff810915f4>] lock_acquire+0x122/0x1b6 [<ffffffff810915f4>] ? lock_acquire+0x122/0x1b6 [<ffffffff814c928f>] ? skb_dequeue+0x18/0x61 [<ffffffff81609dbf>] _raw_spin_lock_irqsave+0x35/0x49 [<ffffffff814c928f>] ? skb_dequeue+0x18/0x61 [<ffffffff814c928f>] skb_dequeue+0x18/0x61 [<ffffffffa009aa92>] afs_deliver_to_call+0x344/0x39d [kafs] [<ffffffffa009ab37>] afs_process_async_call+0x4c/0xd5 [kafs] [<ffffffffa0099e9c>] afs_async_workfn+0xe/0x10 [kafs] [<ffffffff81063a3a>] process_one_work+0x29d/0x57c [<ffffffff81064ac2>] worker_thread+0x24a/0x385 [<ffffffff81064878>] ? rescuer_thread+0x2d0/0x2d0 [<ffffffff810696f5>] kthread+0xf3/0xfb [<ffffffff8160a6ff>] ret_from_fork+0x1f/0x40 [<ffffffff81069602>] ? kthread_create_on_node+0x1cf/0x1cf Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> diff 372ee163 Wed Aug 03 07:11:40 MDT 2016 David Howells <dhowells@redhat.com> rxrpc: Fix races between skb free, ACK generation and replying Inside the kafs filesystem it is possible to occasionally have a call processed and terminated before we've had a chance to check whether we need to clean up the rx queue for that call because afs_send_simple_reply() ends the call when it is done, but this is done in a workqueue item that might happen to run to completion before afs_deliver_to_call() completes. Further, it is possible for rxrpc_kernel_send_data() to be called to send a reply before the last request-phase data skb is released. The rxrpc skb destructor is where the ACK processing is done and the call state is advanced upon release of the last skb. ACK generation is also deferred to a work item because it's possible that the skb destructor is not called in a context where kernel_sendmsg() can be invoked. To this end, the following changes are made: (1) kernel_rxrpc_data_consumed() is added. This should be called whenever an skb is emptied so as to crank the ACK and call states. This does not release the skb, however. kernel_rxrpc_free_skb() must now be called to achieve that. These together replace rxrpc_kernel_data_delivered(). (2) kernel_rxrpc_data_consumed() is wrapped by afs_data_consumed(). This makes afs_deliver_to_call() easier to work as the skb can simply be discarded unconditionally here without trying to work out what the return value of the ->deliver() function means. The ->deliver() functions can, via afs_data_complete(), afs_transfer_reply() and afs_extract_data() mark that an skb has been consumed (thereby cranking the state) without the need to conditionally free the skb to make sure the state is correct on an incoming call for when the call processor tries to send the reply. (3) rxrpc_recvmsg() now has to call kernel_rxrpc_data_consumed() when it has finished with a packet and MSG_PEEK isn't set. (4) rxrpc_packet_destructor() no longer calls rxrpc_hard_ACK_data(). Because of this, we no longer need to clear the destructor and put the call before we free the skb in cases where we don't want the ACK/call state to be cranked. (5) The ->deliver() call-type callbacks are made to return -EAGAIN rather than 0 if they expect more data (afs_extract_data() returns -EAGAIN to the delivery function already), and the caller is now responsible for producing an abort if that was the last packet. (6) There are many bits of unmarshalling code where: ret = afs_extract_data(call, skb, last, ...); switch (ret) { case 0: break; case -EAGAIN: return 0; default: return ret; } is to be found. As -EAGAIN can now be passed back to the caller, we now just return if ret < 0: ret = afs_extract_data(call, skb, last, ...); if (ret < 0) return ret; (7) Checks for trailing data and empty final data packets has been consolidated as afs_data_complete(). So: if (skb->len > 0) return -EBADMSG; if (!last) return 0; becomes: ret = afs_data_complete(call, skb, last); if (ret < 0) return ret; (8) afs_transfer_reply() now checks the amount of data it has against the amount of data desired and the amount of data in the skb and returns an error to induce an abort if we don't get exactly what we want. Without these changes, the following oops can occasionally be observed, particularly if some printks are inserted into the delivery path: general protection fault: 0000 [#1] SMP Modules linked in: kafs(E) af_rxrpc(E) [last unloaded: af_rxrpc] CPU: 0 PID: 1305 Comm: kworker/u8:3 Tainted: G E 4.7.0-fsdevel+ #1303 Hardware name: ASUS All Series/H97-PLUS, BIOS 2306 10/09/2014 Workqueue: kafsd afs_async_workfn [kafs] task: ffff88040be041c0 ti: ffff88040c070000 task.ti: ffff88040c070000 RIP: 0010:[<ffffffff8108fd3c>] [<ffffffff8108fd3c>] __lock_acquire+0xcf/0x15a1 RSP: 0018:ffff88040c073bc0 EFLAGS: 00010002 RAX: 6b6b6b6b6b6b6b6b RBX: 0000000000000000 RCX: ffff88040d29a710 RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffff88040d29a710 RBP: ffff88040c073c70 R08: 0000000000000001 R09: 0000000000000001 R10: 0000000000000001 R11: 0000000000000000 R12: 0000000000000000 R13: 0000000000000000 R14: ffff88040be041c0 R15: ffffffff814c928f FS: 0000000000000000(0000) GS:ffff88041fa00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fa4595f4750 CR3: 0000000001c14000 CR4: 00000000001406f0 Stack: 0000000000000006 000000000be04930 0000000000000000 ffff880400000000 ffff880400000000 ffffffff8108f847 ffff88040be041c0 ffffffff81050446 ffff8803fc08a920 ffff8803fc08a958 ffff88040be041c0 ffff88040c073c38 Call Trace: [<ffffffff8108f847>] ? mark_held_locks+0x5e/0x74 [<ffffffff81050446>] ? __local_bh_enable_ip+0x9b/0xa1 [<ffffffff8108f9ca>] ? trace_hardirqs_on_caller+0x16d/0x189 [<ffffffff810915f4>] lock_acquire+0x122/0x1b6 [<ffffffff810915f4>] ? lock_acquire+0x122/0x1b6 [<ffffffff814c928f>] ? skb_dequeue+0x18/0x61 [<ffffffff81609dbf>] _raw_spin_lock_irqsave+0x35/0x49 [<ffffffff814c928f>] ? skb_dequeue+0x18/0x61 [<ffffffff814c928f>] skb_dequeue+0x18/0x61 [<ffffffffa009aa92>] afs_deliver_to_call+0x344/0x39d [kafs] [<ffffffffa009ab37>] afs_process_async_call+0x4c/0xd5 [kafs] [<ffffffffa0099e9c>] afs_async_workfn+0xe/0x10 [kafs] [<ffffffff81063a3a>] process_one_work+0x29d/0x57c [<ffffffff81064ac2>] worker_thread+0x24a/0x385 [<ffffffff81064878>] ? rescuer_thread+0x2d0/0x2d0 [<ffffffff810696f5>] kthread+0xf3/0xfb [<ffffffff8160a6ff>] ret_from_fork+0x1f/0x40 [<ffffffff81069602>] ? kthread_create_on_node+0x1cf/0x1cf Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> diff 372ee163 Wed Aug 03 07:11:40 MDT 2016 David Howells <dhowells@redhat.com> rxrpc: Fix races between skb free, ACK generation and replying Inside the kafs filesystem it is possible to occasionally have a call processed and terminated before we've had a chance to check whether we need to clean up the rx queue for that call because afs_send_simple_reply() ends the call when it is done, but this is done in a workqueue item that might happen to run to completion before afs_deliver_to_call() completes. Further, it is possible for rxrpc_kernel_send_data() to be called to send a reply before the last request-phase data skb is released. The rxrpc skb destructor is where the ACK processing is done and the call state is advanced upon release of the last skb. ACK generation is also deferred to a work item because it's possible that the skb destructor is not called in a context where kernel_sendmsg() can be invoked. To this end, the following changes are made: (1) kernel_rxrpc_data_consumed() is added. This should be called whenever an skb is emptied so as to crank the ACK and call states. This does not release the skb, however. kernel_rxrpc_free_skb() must now be called to achieve that. These together replace rxrpc_kernel_data_delivered(). (2) kernel_rxrpc_data_consumed() is wrapped by afs_data_consumed(). This makes afs_deliver_to_call() easier to work as the skb can simply be discarded unconditionally here without trying to work out what the return value of the ->deliver() function means. The ->deliver() functions can, via afs_data_complete(), afs_transfer_reply() and afs_extract_data() mark that an skb has been consumed (thereby cranking the state) without the need to conditionally free the skb to make sure the state is correct on an incoming call for when the call processor tries to send the reply. (3) rxrpc_recvmsg() now has to call kernel_rxrpc_data_consumed() when it has finished with a packet and MSG_PEEK isn't set. (4) rxrpc_packet_destructor() no longer calls rxrpc_hard_ACK_data(). Because of this, we no longer need to clear the destructor and put the call before we free the skb in cases where we don't want the ACK/call state to be cranked. (5) The ->deliver() call-type callbacks are made to return -EAGAIN rather than 0 if they expect more data (afs_extract_data() returns -EAGAIN to the delivery function already), and the caller is now responsible for producing an abort if that was the last packet. (6) There are many bits of unmarshalling code where: ret = afs_extract_data(call, skb, last, ...); switch (ret) { case 0: break; case -EAGAIN: return 0; default: return ret; } is to be found. As -EAGAIN can now be passed back to the caller, we now just return if ret < 0: ret = afs_extract_data(call, skb, last, ...); if (ret < 0) return ret; (7) Checks for trailing data and empty final data packets has been consolidated as afs_data_complete(). So: if (skb->len > 0) return -EBADMSG; if (!last) return 0; becomes: ret = afs_data_complete(call, skb, last); if (ret < 0) return ret; (8) afs_transfer_reply() now checks the amount of data it has against the amount of data desired and the amount of data in the skb and returns an error to induce an abort if we don't get exactly what we want. Without these changes, the following oops can occasionally be observed, particularly if some printks are inserted into the delivery path: general protection fault: 0000 [#1] SMP Modules linked in: kafs(E) af_rxrpc(E) [last unloaded: af_rxrpc] CPU: 0 PID: 1305 Comm: kworker/u8:3 Tainted: G E 4.7.0-fsdevel+ #1303 Hardware name: ASUS All Series/H97-PLUS, BIOS 2306 10/09/2014 Workqueue: kafsd afs_async_workfn [kafs] task: ffff88040be041c0 ti: ffff88040c070000 task.ti: ffff88040c070000 RIP: 0010:[<ffffffff8108fd3c>] [<ffffffff8108fd3c>] __lock_acquire+0xcf/0x15a1 RSP: 0018:ffff88040c073bc0 EFLAGS: 00010002 RAX: 6b6b6b6b6b6b6b6b RBX: 0000000000000000 RCX: ffff88040d29a710 RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffff88040d29a710 RBP: ffff88040c073c70 R08: 0000000000000001 R09: 0000000000000001 R10: 0000000000000001 R11: 0000000000000000 R12: 0000000000000000 R13: 0000000000000000 R14: ffff88040be041c0 R15: ffffffff814c928f FS: 0000000000000000(0000) GS:ffff88041fa00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fa4595f4750 CR3: 0000000001c14000 CR4: 00000000001406f0 Stack: 0000000000000006 000000000be04930 0000000000000000 ffff880400000000 ffff880400000000 ffffffff8108f847 ffff88040be041c0 ffffffff81050446 ffff8803fc08a920 ffff8803fc08a958 ffff88040be041c0 ffff88040c073c38 Call Trace: [<ffffffff8108f847>] ? mark_held_locks+0x5e/0x74 [<ffffffff81050446>] ? __local_bh_enable_ip+0x9b/0xa1 [<ffffffff8108f9ca>] ? trace_hardirqs_on_caller+0x16d/0x189 [<ffffffff810915f4>] lock_acquire+0x122/0x1b6 [<ffffffff810915f4>] ? lock_acquire+0x122/0x1b6 [<ffffffff814c928f>] ? skb_dequeue+0x18/0x61 [<ffffffff81609dbf>] _raw_spin_lock_irqsave+0x35/0x49 [<ffffffff814c928f>] ? skb_dequeue+0x18/0x61 [<ffffffff814c928f>] skb_dequeue+0x18/0x61 [<ffffffffa009aa92>] afs_deliver_to_call+0x344/0x39d [kafs] [<ffffffffa009ab37>] afs_process_async_call+0x4c/0xd5 [kafs] [<ffffffffa0099e9c>] afs_async_workfn+0xe/0x10 [kafs] [<ffffffff81063a3a>] process_one_work+0x29d/0x57c [<ffffffff81064ac2>] worker_thread+0x24a/0x385 [<ffffffff81064878>] ? rescuer_thread+0x2d0/0x2d0 [<ffffffff810696f5>] kthread+0xf3/0xfb [<ffffffff8160a6ff>] ret_from_fork+0x1f/0x40 [<ffffffff81069602>] ? kthread_create_on_node+0x1cf/0x1cf Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> diff 372ee163 Wed Aug 03 07:11:40 MDT 2016 David Howells <dhowells@redhat.com> rxrpc: Fix races between skb free, ACK generation and replying Inside the kafs filesystem it is possible to occasionally have a call processed and terminated before we've had a chance to check whether we need to clean up the rx queue for that call because afs_send_simple_reply() ends the call when it is done, but this is done in a workqueue item that might happen to run to completion before afs_deliver_to_call() completes. Further, it is possible for rxrpc_kernel_send_data() to be called to send a reply before the last request-phase data skb is released. The rxrpc skb destructor is where the ACK processing is done and the call state is advanced upon release of the last skb. ACK generation is also deferred to a work item because it's possible that the skb destructor is not called in a context where kernel_sendmsg() can be invoked. To this end, the following changes are made: (1) kernel_rxrpc_data_consumed() is added. This should be called whenever an skb is emptied so as to crank the ACK and call states. This does not release the skb, however. kernel_rxrpc_free_skb() must now be called to achieve that. These together replace rxrpc_kernel_data_delivered(). (2) kernel_rxrpc_data_consumed() is wrapped by afs_data_consumed(). This makes afs_deliver_to_call() easier to work as the skb can simply be discarded unconditionally here without trying to work out what the return value of the ->deliver() function means. The ->deliver() functions can, via afs_data_complete(), afs_transfer_reply() and afs_extract_data() mark that an skb has been consumed (thereby cranking the state) without the need to conditionally free the skb to make sure the state is correct on an incoming call for when the call processor tries to send the reply. (3) rxrpc_recvmsg() now has to call kernel_rxrpc_data_consumed() when it has finished with a packet and MSG_PEEK isn't set. (4) rxrpc_packet_destructor() no longer calls rxrpc_hard_ACK_data(). Because of this, we no longer need to clear the destructor and put the call before we free the skb in cases where we don't want the ACK/call state to be cranked. (5) The ->deliver() call-type callbacks are made to return -EAGAIN rather than 0 if they expect more data (afs_extract_data() returns -EAGAIN to the delivery function already), and the caller is now responsible for producing an abort if that was the last packet. (6) There are many bits of unmarshalling code where: ret = afs_extract_data(call, skb, last, ...); switch (ret) { case 0: break; case -EAGAIN: return 0; default: return ret; } is to be found. As -EAGAIN can now be passed back to the caller, we now just return if ret < 0: ret = afs_extract_data(call, skb, last, ...); if (ret < 0) return ret; (7) Checks for trailing data and empty final data packets has been consolidated as afs_data_complete(). So: if (skb->len > 0) return -EBADMSG; if (!last) return 0; becomes: ret = afs_data_complete(call, skb, last); if (ret < 0) return ret; (8) afs_transfer_reply() now checks the amount of data it has against the amount of data desired and the amount of data in the skb and returns an error to induce an abort if we don't get exactly what we want. Without these changes, the following oops can occasionally be observed, particularly if some printks are inserted into the delivery path: general protection fault: 0000 [#1] SMP Modules linked in: kafs(E) af_rxrpc(E) [last unloaded: af_rxrpc] CPU: 0 PID: 1305 Comm: kworker/u8:3 Tainted: G E 4.7.0-fsdevel+ #1303 Hardware name: ASUS All Series/H97-PLUS, BIOS 2306 10/09/2014 Workqueue: kafsd afs_async_workfn [kafs] task: ffff88040be041c0 ti: ffff88040c070000 task.ti: ffff88040c070000 RIP: 0010:[<ffffffff8108fd3c>] [<ffffffff8108fd3c>] __lock_acquire+0xcf/0x15a1 RSP: 0018:ffff88040c073bc0 EFLAGS: 00010002 RAX: 6b6b6b6b6b6b6b6b RBX: 0000000000000000 RCX: ffff88040d29a710 RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffff88040d29a710 RBP: ffff88040c073c70 R08: 0000000000000001 R09: 0000000000000001 R10: 0000000000000001 R11: 0000000000000000 R12: 0000000000000000 R13: 0000000000000000 R14: ffff88040be041c0 R15: ffffffff814c928f FS: 0000000000000000(0000) GS:ffff88041fa00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fa4595f4750 CR3: 0000000001c14000 CR4: 00000000001406f0 Stack: 0000000000000006 000000000be04930 0000000000000000 ffff880400000000 ffff880400000000 ffffffff8108f847 ffff88040be041c0 ffffffff81050446 ffff8803fc08a920 ffff8803fc08a958 ffff88040be041c0 ffff88040c073c38 Call Trace: [<ffffffff8108f847>] ? mark_held_locks+0x5e/0x74 [<ffffffff81050446>] ? __local_bh_enable_ip+0x9b/0xa1 [<ffffffff8108f9ca>] ? trace_hardirqs_on_caller+0x16d/0x189 [<ffffffff810915f4>] lock_acquire+0x122/0x1b6 [<ffffffff810915f4>] ? lock_acquire+0x122/0x1b6 [<ffffffff814c928f>] ? skb_dequeue+0x18/0x61 [<ffffffff81609dbf>] _raw_spin_lock_irqsave+0x35/0x49 [<ffffffff814c928f>] ? skb_dequeue+0x18/0x61 [<ffffffff814c928f>] skb_dequeue+0x18/0x61 [<ffffffffa009aa92>] afs_deliver_to_call+0x344/0x39d [kafs] [<ffffffffa009ab37>] afs_process_async_call+0x4c/0xd5 [kafs] [<ffffffffa0099e9c>] afs_async_workfn+0xe/0x10 [kafs] [<ffffffff81063a3a>] process_one_work+0x29d/0x57c [<ffffffff81064ac2>] worker_thread+0x24a/0x385 [<ffffffff81064878>] ? rescuer_thread+0x2d0/0x2d0 [<ffffffff810696f5>] kthread+0xf3/0xfb [<ffffffff8160a6ff>] ret_from_fork+0x1f/0x40 [<ffffffff81069602>] ? kthread_create_on_node+0x1cf/0x1cf Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> diff 372ee163 Wed Aug 03 07:11:40 MDT 2016 David Howells <dhowells@redhat.com> rxrpc: Fix races between skb free, ACK generation and replying Inside the kafs filesystem it is possible to occasionally have a call processed and terminated before we've had a chance to check whether we need to clean up the rx queue for that call because afs_send_simple_reply() ends the call when it is done, but this is done in a workqueue item that might happen to run to completion before afs_deliver_to_call() completes. Further, it is possible for rxrpc_kernel_send_data() to be called to send a reply before the last request-phase data skb is released. The rxrpc skb destructor is where the ACK processing is done and the call state is advanced upon release of the last skb. ACK generation is also deferred to a work item because it's possible that the skb destructor is not called in a context where kernel_sendmsg() can be invoked. To this end, the following changes are made: (1) kernel_rxrpc_data_consumed() is added. This should be called whenever an skb is emptied so as to crank the ACK and call states. This does not release the skb, however. kernel_rxrpc_free_skb() must now be called to achieve that. These together replace rxrpc_kernel_data_delivered(). (2) kernel_rxrpc_data_consumed() is wrapped by afs_data_consumed(). This makes afs_deliver_to_call() easier to work as the skb can simply be discarded unconditionally here without trying to work out what the return value of the ->deliver() function means. The ->deliver() functions can, via afs_data_complete(), afs_transfer_reply() and afs_extract_data() mark that an skb has been consumed (thereby cranking the state) without the need to conditionally free the skb to make sure the state is correct on an incoming call for when the call processor tries to send the reply. (3) rxrpc_recvmsg() now has to call kernel_rxrpc_data_consumed() when it has finished with a packet and MSG_PEEK isn't set. (4) rxrpc_packet_destructor() no longer calls rxrpc_hard_ACK_data(). Because of this, we no longer need to clear the destructor and put the call before we free the skb in cases where we don't want the ACK/call state to be cranked. (5) The ->deliver() call-type callbacks are made to return -EAGAIN rather than 0 if they expect more data (afs_extract_data() returns -EAGAIN to the delivery function already), and the caller is now responsible for producing an abort if that was the last packet. (6) There are many bits of unmarshalling code where: ret = afs_extract_data(call, skb, last, ...); switch (ret) { case 0: break; case -EAGAIN: return 0; default: return ret; } is to be found. As -EAGAIN can now be passed back to the caller, we now just return if ret < 0: ret = afs_extract_data(call, skb, last, ...); if (ret < 0) return ret; (7) Checks for trailing data and empty final data packets has been consolidated as afs_data_complete(). So: if (skb->len > 0) return -EBADMSG; if (!last) return 0; becomes: ret = afs_data_complete(call, skb, last); if (ret < 0) return ret; (8) afs_transfer_reply() now checks the amount of data it has against the amount of data desired and the amount of data in the skb and returns an error to induce an abort if we don't get exactly what we want. Without these changes, the following oops can occasionally be observed, particularly if some printks are inserted into the delivery path: general protection fault: 0000 [#1] SMP Modules linked in: kafs(E) af_rxrpc(E) [last unloaded: af_rxrpc] CPU: 0 PID: 1305 Comm: kworker/u8:3 Tainted: G E 4.7.0-fsdevel+ #1303 Hardware name: ASUS All Series/H97-PLUS, BIOS 2306 10/09/2014 Workqueue: kafsd afs_async_workfn [kafs] task: ffff88040be041c0 ti: ffff88040c070000 task.ti: ffff88040c070000 RIP: 0010:[<ffffffff8108fd3c>] [<ffffffff8108fd3c>] __lock_acquire+0xcf/0x15a1 RSP: 0018:ffff88040c073bc0 EFLAGS: 00010002 RAX: 6b6b6b6b6b6b6b6b RBX: 0000000000000000 RCX: ffff88040d29a710 RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffff88040d29a710 RBP: ffff88040c073c70 R08: 0000000000000001 R09: 0000000000000001 R10: 0000000000000001 R11: 0000000000000000 R12: 0000000000000000 R13: 0000000000000000 R14: ffff88040be041c0 R15: ffffffff814c928f FS: 0000000000000000(0000) GS:ffff88041fa00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fa4595f4750 CR3: 0000000001c14000 CR4: 00000000001406f0 Stack: 0000000000000006 000000000be04930 0000000000000000 ffff880400000000 ffff880400000000 ffffffff8108f847 ffff88040be041c0 ffffffff81050446 ffff8803fc08a920 ffff8803fc08a958 ffff88040be041c0 ffff88040c073c38 Call Trace: [<ffffffff8108f847>] ? mark_held_locks+0x5e/0x74 [<ffffffff81050446>] ? __local_bh_enable_ip+0x9b/0xa1 [<ffffffff8108f9ca>] ? trace_hardirqs_on_caller+0x16d/0x189 [<ffffffff810915f4>] lock_acquire+0x122/0x1b6 [<ffffffff810915f4>] ? lock_acquire+0x122/0x1b6 [<ffffffff814c928f>] ? skb_dequeue+0x18/0x61 [<ffffffff81609dbf>] _raw_spin_lock_irqsave+0x35/0x49 [<ffffffff814c928f>] ? skb_dequeue+0x18/0x61 [<ffffffff814c928f>] skb_dequeue+0x18/0x61 [<ffffffffa009aa92>] afs_deliver_to_call+0x344/0x39d [kafs] [<ffffffffa009ab37>] afs_process_async_call+0x4c/0xd5 [kafs] [<ffffffffa0099e9c>] afs_async_workfn+0xe/0x10 [kafs] [<ffffffff81063a3a>] process_one_work+0x29d/0x57c [<ffffffff81064ac2>] worker_thread+0x24a/0x385 [<ffffffff81064878>] ? rescuer_thread+0x2d0/0x2d0 [<ffffffff810696f5>] kthread+0xf3/0xfb [<ffffffff8160a6ff>] ret_from_fork+0x1f/0x40 [<ffffffff81069602>] ? kthread_create_on_node+0x1cf/0x1cf Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> diff 372ee163 Wed Aug 03 07:11:40 MDT 2016 David Howells <dhowells@redhat.com> rxrpc: Fix races between skb free, ACK generation and replying Inside the kafs filesystem it is possible to occasionally have a call processed and terminated before we've had a chance to check whether we need to clean up the rx queue for that call because afs_send_simple_reply() ends the call when it is done, but this is done in a workqueue item that might happen to run to completion before afs_deliver_to_call() completes. Further, it is possible for rxrpc_kernel_send_data() to be called to send a reply before the last request-phase data skb is released. The rxrpc skb destructor is where the ACK processing is done and the call state is advanced upon release of the last skb. ACK generation is also deferred to a work item because it's possible that the skb destructor is not called in a context where kernel_sendmsg() can be invoked. To this end, the following changes are made: (1) kernel_rxrpc_data_consumed() is added. This should be called whenever an skb is emptied so as to crank the ACK and call states. This does not release the skb, however. kernel_rxrpc_free_skb() must now be called to achieve that. These together replace rxrpc_kernel_data_delivered(). (2) kernel_rxrpc_data_consumed() is wrapped by afs_data_consumed(). This makes afs_deliver_to_call() easier to work as the skb can simply be discarded unconditionally here without trying to work out what the return value of the ->deliver() function means. The ->deliver() functions can, via afs_data_complete(), afs_transfer_reply() and afs_extract_data() mark that an skb has been consumed (thereby cranking the state) without the need to conditionally free the skb to make sure the state is correct on an incoming call for when the call processor tries to send the reply. (3) rxrpc_recvmsg() now has to call kernel_rxrpc_data_consumed() when it has finished with a packet and MSG_PEEK isn't set. (4) rxrpc_packet_destructor() no longer calls rxrpc_hard_ACK_data(). Because of this, we no longer need to clear the destructor and put the call before we free the skb in cases where we don't want the ACK/call state to be cranked. (5) The ->deliver() call-type callbacks are made to return -EAGAIN rather than 0 if they expect more data (afs_extract_data() returns -EAGAIN to the delivery function already), and the caller is now responsible for producing an abort if that was the last packet. (6) There are many bits of unmarshalling code where: ret = afs_extract_data(call, skb, last, ...); switch (ret) { case 0: break; case -EAGAIN: return 0; default: return ret; } is to be found. As -EAGAIN can now be passed back to the caller, we now just return if ret < 0: ret = afs_extract_data(call, skb, last, ...); if (ret < 0) return ret; (7) Checks for trailing data and empty final data packets has been consolidated as afs_data_complete(). So: if (skb->len > 0) return -EBADMSG; if (!last) return 0; becomes: ret = afs_data_complete(call, skb, last); if (ret < 0) return ret; (8) afs_transfer_reply() now checks the amount of data it has against the amount of data desired and the amount of data in the skb and returns an error to induce an abort if we don't get exactly what we want. Without these changes, the following oops can occasionally be observed, particularly if some printks are inserted into the delivery path: general protection fault: 0000 [#1] SMP Modules linked in: kafs(E) af_rxrpc(E) [last unloaded: af_rxrpc] CPU: 0 PID: 1305 Comm: kworker/u8:3 Tainted: G E 4.7.0-fsdevel+ #1303 Hardware name: ASUS All Series/H97-PLUS, BIOS 2306 10/09/2014 Workqueue: kafsd afs_async_workfn [kafs] task: ffff88040be041c0 ti: ffff88040c070000 task.ti: ffff88040c070000 RIP: 0010:[<ffffffff8108fd3c>] [<ffffffff8108fd3c>] __lock_acquire+0xcf/0x15a1 RSP: 0018:ffff88040c073bc0 EFLAGS: 00010002 RAX: 6b6b6b6b6b6b6b6b RBX: 0000000000000000 RCX: ffff88040d29a710 RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffff88040d29a710 RBP: ffff88040c073c70 R08: 0000000000000001 R09: 0000000000000001 R10: 0000000000000001 R11: 0000000000000000 R12: 0000000000000000 R13: 0000000000000000 R14: ffff88040be041c0 R15: ffffffff814c928f FS: 0000000000000000(0000) GS:ffff88041fa00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fa4595f4750 CR3: 0000000001c14000 CR4: 00000000001406f0 Stack: 0000000000000006 000000000be04930 0000000000000000 ffff880400000000 ffff880400000000 ffffffff8108f847 ffff88040be041c0 ffffffff81050446 ffff8803fc08a920 ffff8803fc08a958 ffff88040be041c0 ffff88040c073c38 Call Trace: [<ffffffff8108f847>] ? mark_held_locks+0x5e/0x74 [<ffffffff81050446>] ? __local_bh_enable_ip+0x9b/0xa1 [<ffffffff8108f9ca>] ? trace_hardirqs_on_caller+0x16d/0x189 [<ffffffff810915f4>] lock_acquire+0x122/0x1b6 [<ffffffff810915f4>] ? lock_acquire+0x122/0x1b6 [<ffffffff814c928f>] ? skb_dequeue+0x18/0x61 [<ffffffff81609dbf>] _raw_spin_lock_irqsave+0x35/0x49 [<ffffffff814c928f>] ? skb_dequeue+0x18/0x61 [<ffffffff814c928f>] skb_dequeue+0x18/0x61 [<ffffffffa009aa92>] afs_deliver_to_call+0x344/0x39d [kafs] [<ffffffffa009ab37>] afs_process_async_call+0x4c/0xd5 [kafs] [<ffffffffa0099e9c>] afs_async_workfn+0xe/0x10 [kafs] [<ffffffff81063a3a>] process_one_work+0x29d/0x57c [<ffffffff81064ac2>] worker_thread+0x24a/0x385 [<ffffffff81064878>] ? rescuer_thread+0x2d0/0x2d0 [<ffffffff810696f5>] kthread+0xf3/0xfb [<ffffffff8160a6ff>] ret_from_fork+0x1f/0x40 [<ffffffff81069602>] ? kthread_create_on_node+0x1cf/0x1cf Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> diff 372ee163 Wed Aug 03 07:11:40 MDT 2016 David Howells <dhowells@redhat.com> rxrpc: Fix races between skb free, ACK generation and replying Inside the kafs filesystem it is possible to occasionally have a call processed and terminated before we've had a chance to check whether we need to clean up the rx queue for that call because afs_send_simple_reply() ends the call when it is done, but this is done in a workqueue item that might happen to run to completion before afs_deliver_to_call() completes. Further, it is possible for rxrpc_kernel_send_data() to be called to send a reply before the last request-phase data skb is released. The rxrpc skb destructor is where the ACK processing is done and the call state is advanced upon release of the last skb. ACK generation is also deferred to a work item because it's possible that the skb destructor is not called in a context where kernel_sendmsg() can be invoked. To this end, the following changes are made: (1) kernel_rxrpc_data_consumed() is added. This should be called whenever an skb is emptied so as to crank the ACK and call states. This does not release the skb, however. kernel_rxrpc_free_skb() must now be called to achieve that. These together replace rxrpc_kernel_data_delivered(). (2) kernel_rxrpc_data_consumed() is wrapped by afs_data_consumed(). This makes afs_deliver_to_call() easier to work as the skb can simply be discarded unconditionally here without trying to work out what the return value of the ->deliver() function means. The ->deliver() functions can, via afs_data_complete(), afs_transfer_reply() and afs_extract_data() mark that an skb has been consumed (thereby cranking the state) without the need to conditionally free the skb to make sure the state is correct on an incoming call for when the call processor tries to send the reply. (3) rxrpc_recvmsg() now has to call kernel_rxrpc_data_consumed() when it has finished with a packet and MSG_PEEK isn't set. (4) rxrpc_packet_destructor() no longer calls rxrpc_hard_ACK_data(). Because of this, we no longer need to clear the destructor and put the call before we free the skb in cases where we don't want the ACK/call state to be cranked. (5) The ->deliver() call-type callbacks are made to return -EAGAIN rather than 0 if they expect more data (afs_extract_data() returns -EAGAIN to the delivery function already), and the caller is now responsible for producing an abort if that was the last packet. (6) There are many bits of unmarshalling code where: ret = afs_extract_data(call, skb, last, ...); switch (ret) { case 0: break; case -EAGAIN: return 0; default: return ret; } is to be found. As -EAGAIN can now be passed back to the caller, we now just return if ret < 0: ret = afs_extract_data(call, skb, last, ...); if (ret < 0) return ret; (7) Checks for trailing data and empty final data packets has been consolidated as afs_data_complete(). So: if (skb->len > 0) return -EBADMSG; if (!last) return 0; becomes: ret = afs_data_complete(call, skb, last); if (ret < 0) return ret; (8) afs_transfer_reply() now checks the amount of data it has against the amount of data desired and the amount of data in the skb and returns an error to induce an abort if we don't get exactly what we want. Without these changes, the following oops can occasionally be observed, particularly if some printks are inserted into the delivery path: general protection fault: 0000 [#1] SMP Modules linked in: kafs(E) af_rxrpc(E) [last unloaded: af_rxrpc] CPU: 0 PID: 1305 Comm: kworker/u8:3 Tainted: G E 4.7.0-fsdevel+ #1303 Hardware name: ASUS All Series/H97-PLUS, BIOS 2306 10/09/2014 Workqueue: kafsd afs_async_workfn [kafs] task: ffff88040be041c0 ti: ffff88040c070000 task.ti: ffff88040c070000 RIP: 0010:[<ffffffff8108fd3c>] [<ffffffff8108fd3c>] __lock_acquire+0xcf/0x15a1 RSP: 0018:ffff88040c073bc0 EFLAGS: 00010002 RAX: 6b6b6b6b6b6b6b6b RBX: 0000000000000000 RCX: ffff88040d29a710 RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffff88040d29a710 RBP: ffff88040c073c70 R08: 0000000000000001 R09: 0000000000000001 R10: 0000000000000001 R11: 0000000000000000 R12: 0000000000000000 R13: 0000000000000000 R14: ffff88040be041c0 R15: ffffffff814c928f FS: 0000000000000000(0000) GS:ffff88041fa00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fa4595f4750 CR3: 0000000001c14000 CR4: 00000000001406f0 Stack: 0000000000000006 000000000be04930 0000000000000000 ffff880400000000 ffff880400000000 ffffffff8108f847 ffff88040be041c0 ffffffff81050446 ffff8803fc08a920 ffff8803fc08a958 ffff88040be041c0 ffff88040c073c38 Call Trace: [<ffffffff8108f847>] ? mark_held_locks+0x5e/0x74 [<ffffffff81050446>] ? __local_bh_enable_ip+0x9b/0xa1 [<ffffffff8108f9ca>] ? trace_hardirqs_on_caller+0x16d/0x189 [<ffffffff810915f4>] lock_acquire+0x122/0x1b6 [<ffffffff810915f4>] ? lock_acquire+0x122/0x1b6 [<ffffffff814c928f>] ? skb_dequeue+0x18/0x61 [<ffffffff81609dbf>] _raw_spin_lock_irqsave+0x35/0x49 [<ffffffff814c928f>] ? skb_dequeue+0x18/0x61 [<ffffffff814c928f>] skb_dequeue+0x18/0x61 [<ffffffffa009aa92>] afs_deliver_to_call+0x344/0x39d [kafs] [<ffffffffa009ab37>] afs_process_async_call+0x4c/0xd5 [kafs] [<ffffffffa0099e9c>] afs_async_workfn+0xe/0x10 [kafs] [<ffffffff81063a3a>] process_one_work+0x29d/0x57c [<ffffffff81064ac2>] worker_thread+0x24a/0x385 [<ffffffff81064878>] ? rescuer_thread+0x2d0/0x2d0 [<ffffffff810696f5>] kthread+0xf3/0xfb [<ffffffff8160a6ff>] ret_from_fork+0x1f/0x40 [<ffffffff81069602>] ? kthread_create_on_node+0x1cf/0x1cf Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> diff 372ee163 Wed Aug 03 07:11:40 MDT 2016 David Howells <dhowells@redhat.com> rxrpc: Fix races between skb free, ACK generation and replying Inside the kafs filesystem it is possible to occasionally have a call processed and terminated before we've had a chance to check whether we need to clean up the rx queue for that call because afs_send_simple_reply() ends the call when it is done, but this is done in a workqueue item that might happen to run to completion before afs_deliver_to_call() completes. Further, it is possible for rxrpc_kernel_send_data() to be called to send a reply before the last request-phase data skb is released. The rxrpc skb destructor is where the ACK processing is done and the call state is advanced upon release of the last skb. ACK generation is also deferred to a work item because it's possible that the skb destructor is not called in a context where kernel_sendmsg() can be invoked. To this end, the following changes are made: (1) kernel_rxrpc_data_consumed() is added. This should be called whenever an skb is emptied so as to crank the ACK and call states. This does not release the skb, however. kernel_rxrpc_free_skb() must now be called to achieve that. These together replace rxrpc_kernel_data_delivered(). (2) kernel_rxrpc_data_consumed() is wrapped by afs_data_consumed(). This makes afs_deliver_to_call() easier to work as the skb can simply be discarded unconditionally here without trying to work out what the return value of the ->deliver() function means. The ->deliver() functions can, via afs_data_complete(), afs_transfer_reply() and afs_extract_data() mark that an skb has been consumed (thereby cranking the state) without the need to conditionally free the skb to make sure the state is correct on an incoming call for when the call processor tries to send the reply. (3) rxrpc_recvmsg() now has to call kernel_rxrpc_data_consumed() when it has finished with a packet and MSG_PEEK isn't set. (4) rxrpc_packet_destructor() no longer calls rxrpc_hard_ACK_data(). Because of this, we no longer need to clear the destructor and put the call before we free the skb in cases where we don't want the ACK/call state to be cranked. (5) The ->deliver() call-type callbacks are made to return -EAGAIN rather than 0 if they expect more data (afs_extract_data() returns -EAGAIN to the delivery function already), and the caller is now responsible for producing an abort if that was the last packet. (6) There are many bits of unmarshalling code where: ret = afs_extract_data(call, skb, last, ...); switch (ret) { case 0: break; case -EAGAIN: return 0; default: return ret; } is to be found. As -EAGAIN can now be passed back to the caller, we now just return if ret < 0: ret = afs_extract_data(call, skb, last, ...); if (ret < 0) return ret; (7) Checks for trailing data and empty final data packets has been consolidated as afs_data_complete(). So: if (skb->len > 0) return -EBADMSG; if (!last) return 0; becomes: ret = afs_data_complete(call, skb, last); if (ret < 0) return ret; (8) afs_transfer_reply() now checks the amount of data it has against the amount of data desired and the amount of data in the skb and returns an error to induce an abort if we don't get exactly what we want. Without these changes, the following oops can occasionally be observed, particularly if some printks are inserted into the delivery path: general protection fault: 0000 [#1] SMP Modules linked in: kafs(E) af_rxrpc(E) [last unloaded: af_rxrpc] CPU: 0 PID: 1305 Comm: kworker/u8:3 Tainted: G E 4.7.0-fsdevel+ #1303 Hardware name: ASUS All Series/H97-PLUS, BIOS 2306 10/09/2014 Workqueue: kafsd afs_async_workfn [kafs] task: ffff88040be041c0 ti: ffff88040c070000 task.ti: ffff88040c070000 RIP: 0010:[<ffffffff8108fd3c>] [<ffffffff8108fd3c>] __lock_acquire+0xcf/0x15a1 RSP: 0018:ffff88040c073bc0 EFLAGS: 00010002 RAX: 6b6b6b6b6b6b6b6b RBX: 0000000000000000 RCX: ffff88040d29a710 RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffff88040d29a710 RBP: ffff88040c073c70 R08: 0000000000000001 R09: 0000000000000001 R10: 0000000000000001 R11: 0000000000000000 R12: 0000000000000000 R13: 0000000000000000 R14: ffff88040be041c0 R15: ffffffff814c928f FS: 0000000000000000(0000) GS:ffff88041fa00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fa4595f4750 CR3: 0000000001c14000 CR4: 00000000001406f0 Stack: 0000000000000006 000000000be04930 0000000000000000 ffff880400000000 ffff880400000000 ffffffff8108f847 ffff88040be041c0 ffffffff81050446 ffff8803fc08a920 ffff8803fc08a958 ffff88040be041c0 ffff88040c073c38 Call Trace: [<ffffffff8108f847>] ? mark_held_locks+0x5e/0x74 [<ffffffff81050446>] ? __local_bh_enable_ip+0x9b/0xa1 [<ffffffff8108f9ca>] ? trace_hardirqs_on_caller+0x16d/0x189 [<ffffffff810915f4>] lock_acquire+0x122/0x1b6 [<ffffffff810915f4>] ? lock_acquire+0x122/0x1b6 [<ffffffff814c928f>] ? skb_dequeue+0x18/0x61 [<ffffffff81609dbf>] _raw_spin_lock_irqsave+0x35/0x49 [<ffffffff814c928f>] ? skb_dequeue+0x18/0x61 [<ffffffff814c928f>] skb_dequeue+0x18/0x61 [<ffffffffa009aa92>] afs_deliver_to_call+0x344/0x39d [kafs] [<ffffffffa009ab37>] afs_process_async_call+0x4c/0xd5 [kafs] [<ffffffffa0099e9c>] afs_async_workfn+0xe/0x10 [kafs] [<ffffffff81063a3a>] process_one_work+0x29d/0x57c [<ffffffff81064ac2>] worker_thread+0x24a/0x385 [<ffffffff81064878>] ? rescuer_thread+0x2d0/0x2d0 [<ffffffff810696f5>] kthread+0xf3/0xfb [<ffffffff8160a6ff>] ret_from_fork+0x1f/0x40 [<ffffffff81069602>] ? kthread_create_on_node+0x1cf/0x1cf Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> diff 372ee163 Wed Aug 03 07:11:40 MDT 2016 David Howells <dhowells@redhat.com> rxrpc: Fix races between skb free, ACK generation and replying Inside the kafs filesystem it is possible to occasionally have a call processed and terminated before we've had a chance to check whether we need to clean up the rx queue for that call because afs_send_simple_reply() ends the call when it is done, but this is done in a workqueue item that might happen to run to completion before afs_deliver_to_call() completes. Further, it is possible for rxrpc_kernel_send_data() to be called to send a reply before the last request-phase data skb is released. The rxrpc skb destructor is where the ACK processing is done and the call state is advanced upon release of the last skb. ACK generation is also deferred to a work item because it's possible that the skb destructor is not called in a context where kernel_sendmsg() can be invoked. To this end, the following changes are made: (1) kernel_rxrpc_data_consumed() is added. This should be called whenever an skb is emptied so as to crank the ACK and call states. This does not release the skb, however. kernel_rxrpc_free_skb() must now be called to achieve that. These together replace rxrpc_kernel_data_delivered(). (2) kernel_rxrpc_data_consumed() is wrapped by afs_data_consumed(). This makes afs_deliver_to_call() easier to work as the skb can simply be discarded unconditionally here without trying to work out what the return value of the ->deliver() function means. The ->deliver() functions can, via afs_data_complete(), afs_transfer_reply() and afs_extract_data() mark that an skb has been consumed (thereby cranking the state) without the need to conditionally free the skb to make sure the state is correct on an incoming call for when the call processor tries to send the reply. (3) rxrpc_recvmsg() now has to call kernel_rxrpc_data_consumed() when it has finished with a packet and MSG_PEEK isn't set. (4) rxrpc_packet_destructor() no longer calls rxrpc_hard_ACK_data(). Because of this, we no longer need to clear the destructor and put the call before we free the skb in cases where we don't want the ACK/call state to be cranked. (5) The ->deliver() call-type callbacks are made to return -EAGAIN rather than 0 if they expect more data (afs_extract_data() returns -EAGAIN to the delivery function already), and the caller is now responsible for producing an abort if that was the last packet. (6) There are many bits of unmarshalling code where: ret = afs_extract_data(call, skb, last, ...); switch (ret) { case 0: break; case -EAGAIN: return 0; default: return ret; } is to be found. As -EAGAIN can now be passed back to the caller, we now just return if ret < 0: ret = afs_extract_data(call, skb, last, ...); if (ret < 0) return ret; (7) Checks for trailing data and empty final data packets has been consolidated as afs_data_complete(). So: if (skb->len > 0) return -EBADMSG; if (!last) return 0; becomes: ret = afs_data_complete(call, skb, last); if (ret < 0) return ret; (8) afs_transfer_reply() now checks the amount of data it has against the amount of data desired and the amount of data in the skb and returns an error to induce an abort if we don't get exactly what we want. Without these changes, the following oops can occasionally be observed, particularly if some printks are inserted into the delivery path: general protection fault: 0000 [#1] SMP Modules linked in: kafs(E) af_rxrpc(E) [last unloaded: af_rxrpc] CPU: 0 PID: 1305 Comm: kworker/u8:3 Tainted: G E 4.7.0-fsdevel+ #1303 Hardware name: ASUS All Series/H97-PLUS, BIOS 2306 10/09/2014 Workqueue: kafsd afs_async_workfn [kafs] task: ffff88040be041c0 ti: ffff88040c070000 task.ti: ffff88040c070000 RIP: 0010:[<ffffffff8108fd3c>] [<ffffffff8108fd3c>] __lock_acquire+0xcf/0x15a1 RSP: 0018:ffff88040c073bc0 EFLAGS: 00010002 RAX: 6b6b6b6b6b6b6b6b RBX: 0000000000000000 RCX: ffff88040d29a710 RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffff88040d29a710 RBP: ffff88040c073c70 R08: 0000000000000001 R09: 0000000000000001 R10: 0000000000000001 R11: 0000000000000000 R12: 0000000000000000 R13: 0000000000000000 R14: ffff88040be041c0 R15: ffffffff814c928f FS: 0000000000000000(0000) GS:ffff88041fa00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fa4595f4750 CR3: 0000000001c14000 CR4: 00000000001406f0 Stack: 0000000000000006 000000000be04930 0000000000000000 ffff880400000000 ffff880400000000 ffffffff8108f847 ffff88040be041c0 ffffffff81050446 ffff8803fc08a920 ffff8803fc08a958 ffff88040be041c0 ffff88040c073c38 Call Trace: [<ffffffff8108f847>] ? mark_held_locks+0x5e/0x74 [<ffffffff81050446>] ? __local_bh_enable_ip+0x9b/0xa1 [<ffffffff8108f9ca>] ? trace_hardirqs_on_caller+0x16d/0x189 [<ffffffff810915f4>] lock_acquire+0x122/0x1b6 [<ffffffff810915f4>] ? lock_acquire+0x122/0x1b6 [<ffffffff814c928f>] ? skb_dequeue+0x18/0x61 [<ffffffff81609dbf>] _raw_spin_lock_irqsave+0x35/0x49 [<ffffffff814c928f>] ? skb_dequeue+0x18/0x61 [<ffffffff814c928f>] skb_dequeue+0x18/0x61 [<ffffffffa009aa92>] afs_deliver_to_call+0x344/0x39d [kafs] [<ffffffffa009ab37>] afs_process_async_call+0x4c/0xd5 [kafs] [<ffffffffa0099e9c>] afs_async_workfn+0xe/0x10 [kafs] [<ffffffff81063a3a>] process_one_work+0x29d/0x57c [<ffffffff81064ac2>] worker_thread+0x24a/0x385 [<ffffffff81064878>] ? rescuer_thread+0x2d0/0x2d0 [<ffffffff810696f5>] kthread+0xf3/0xfb [<ffffffff8160a6ff>] ret_from_fork+0x1f/0x40 [<ffffffff81069602>] ? kthread_create_on_node+0x1cf/0x1cf Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> diff 372ee163 Wed Aug 03 07:11:40 MDT 2016 David Howells <dhowells@redhat.com> rxrpc: Fix races between skb free, ACK generation and replying Inside the kafs filesystem it is possible to occasionally have a call processed and terminated before we've had a chance to check whether we need to clean up the rx queue for that call because afs_send_simple_reply() ends the call when it is done, but this is done in a workqueue item that might happen to run to completion before afs_deliver_to_call() completes. Further, it is possible for rxrpc_kernel_send_data() to be called to send a reply before the last request-phase data skb is released. The rxrpc skb destructor is where the ACK processing is done and the call state is advanced upon release of the last skb. ACK generation is also deferred to a work item because it's possible that the skb destructor is not called in a context where kernel_sendmsg() can be invoked. To this end, the following changes are made: (1) kernel_rxrpc_data_consumed() is added. This should be called whenever an skb is emptied so as to crank the ACK and call states. This does not release the skb, however. kernel_rxrpc_free_skb() must now be called to achieve that. These together replace rxrpc_kernel_data_delivered(). (2) kernel_rxrpc_data_consumed() is wrapped by afs_data_consumed(). This makes afs_deliver_to_call() easier to work as the skb can simply be discarded unconditionally here without trying to work out what the return value of the ->deliver() function means. The ->deliver() functions can, via afs_data_complete(), afs_transfer_reply() and afs_extract_data() mark that an skb has been consumed (thereby cranking the state) without the need to conditionally free the skb to make sure the state is correct on an incoming call for when the call processor tries to send the reply. (3) rxrpc_recvmsg() now has to call kernel_rxrpc_data_consumed() when it has finished with a packet and MSG_PEEK isn't set. (4) rxrpc_packet_destructor() no longer calls rxrpc_hard_ACK_data(). Because of this, we no longer need to clear the destructor and put the call before we free the skb in cases where we don't want the ACK/call state to be cranked. (5) The ->deliver() call-type callbacks are made to return -EAGAIN rather than 0 if they expect more data (afs_extract_data() returns -EAGAIN to the delivery function already), and the caller is now responsible for producing an abort if that was the last packet. (6) There are many bits of unmarshalling code where: ret = afs_extract_data(call, skb, last, ...); switch (ret) { case 0: break; case -EAGAIN: return 0; default: return ret; } is to be found. As -EAGAIN can now be passed back to the caller, we now just return if ret < 0: ret = afs_extract_data(call, skb, last, ...); if (ret < 0) return ret; (7) Checks for trailing data and empty final data packets has been consolidated as afs_data_complete(). So: if (skb->len > 0) return -EBADMSG; if (!last) return 0; becomes: ret = afs_data_complete(call, skb, last); if (ret < 0) return ret; (8) afs_transfer_reply() now checks the amount of data it has against the amount of data desired and the amount of data in the skb and returns an error to induce an abort if we don't get exactly what we want. Without these changes, the following oops can occasionally be observed, particularly if some printks are inserted into the delivery path: general protection fault: 0000 [#1] SMP Modules linked in: kafs(E) af_rxrpc(E) [last unloaded: af_rxrpc] CPU: 0 PID: 1305 Comm: kworker/u8:3 Tainted: G E 4.7.0-fsdevel+ #1303 Hardware name: ASUS All Series/H97-PLUS, BIOS 2306 10/09/2014 Workqueue: kafsd afs_async_workfn [kafs] task: ffff88040be041c0 ti: ffff88040c070000 task.ti: ffff88040c070000 RIP: 0010:[<ffffffff8108fd3c>] [<ffffffff8108fd3c>] __lock_acquire+0xcf/0x15a1 RSP: 0018:ffff88040c073bc0 EFLAGS: 00010002 RAX: 6b6b6b6b6b6b6b6b RBX: 0000000000000000 RCX: ffff88040d29a710 RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffff88040d29a710 RBP: ffff88040c073c70 R08: 0000000000000001 R09: 0000000000000001 R10: 0000000000000001 R11: 0000000000000000 R12: 0000000000000000 R13: 0000000000000000 R14: ffff88040be041c0 R15: ffffffff814c928f FS: 0000000000000000(0000) GS:ffff88041fa00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fa4595f4750 CR3: 0000000001c14000 CR4: 00000000001406f0 Stack: 0000000000000006 000000000be04930 0000000000000000 ffff880400000000 ffff880400000000 ffffffff8108f847 ffff88040be041c0 ffffffff81050446 ffff8803fc08a920 ffff8803fc08a958 ffff88040be041c0 ffff88040c073c38 Call Trace: [<ffffffff8108f847>] ? mark_held_locks+0x5e/0x74 [<ffffffff81050446>] ? __local_bh_enable_ip+0x9b/0xa1 [<ffffffff8108f9ca>] ? trace_hardirqs_on_caller+0x16d/0x189 [<ffffffff810915f4>] lock_acquire+0x122/0x1b6 [<ffffffff810915f4>] ? lock_acquire+0x122/0x1b6 [<ffffffff814c928f>] ? skb_dequeue+0x18/0x61 [<ffffffff81609dbf>] _raw_spin_lock_irqsave+0x35/0x49 [<ffffffff814c928f>] ? skb_dequeue+0x18/0x61 [<ffffffff814c928f>] skb_dequeue+0x18/0x61 [<ffffffffa009aa92>] afs_deliver_to_call+0x344/0x39d [kafs] [<ffffffffa009ab37>] afs_process_async_call+0x4c/0xd5 [kafs] [<ffffffffa0099e9c>] afs_async_workfn+0xe/0x10 [kafs] [<ffffffff81063a3a>] process_one_work+0x29d/0x57c [<ffffffff81064ac2>] worker_thread+0x24a/0x385 [<ffffffff81064878>] ? rescuer_thread+0x2d0/0x2d0 [<ffffffff810696f5>] kthread+0xf3/0xfb [<ffffffff8160a6ff>] ret_from_fork+0x1f/0x40 [<ffffffff81069602>] ? kthread_create_on_node+0x1cf/0x1cf Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> diff 372ee163 Wed Aug 03 07:11:40 MDT 2016 David Howells <dhowells@redhat.com> rxrpc: Fix races between skb free, ACK generation and replying Inside the kafs filesystem it is possible to occasionally have a call processed and terminated before we've had a chance to check whether we need to clean up the rx queue for that call because afs_send_simple_reply() ends the call when it is done, but this is done in a workqueue item that might happen to run to completion before afs_deliver_to_call() completes. Further, it is possible for rxrpc_kernel_send_data() to be called to send a reply before the last request-phase data skb is released. The rxrpc skb destructor is where the ACK processing is done and the call state is advanced upon release of the last skb. ACK generation is also deferred to a work item because it's possible that the skb destructor is not called in a context where kernel_sendmsg() can be invoked. To this end, the following changes are made: (1) kernel_rxrpc_data_consumed() is added. This should be called whenever an skb is emptied so as to crank the ACK and call states. This does not release the skb, however. kernel_rxrpc_free_skb() must now be called to achieve that. These together replace rxrpc_kernel_data_delivered(). (2) kernel_rxrpc_data_consumed() is wrapped by afs_data_consumed(). This makes afs_deliver_to_call() easier to work as the skb can simply be discarded unconditionally here without trying to work out what the return value of the ->deliver() function means. The ->deliver() functions can, via afs_data_complete(), afs_transfer_reply() and afs_extract_data() mark that an skb has been consumed (thereby cranking the state) without the need to conditionally free the skb to make sure the state is correct on an incoming call for when the call processor tries to send the reply. (3) rxrpc_recvmsg() now has to call kernel_rxrpc_data_consumed() when it has finished with a packet and MSG_PEEK isn't set. (4) rxrpc_packet_destructor() no longer calls rxrpc_hard_ACK_data(). Because of this, we no longer need to clear the destructor and put the call before we free the skb in cases where we don't want the ACK/call state to be cranked. (5) The ->deliver() call-type callbacks are made to return -EAGAIN rather than 0 if they expect more data (afs_extract_data() returns -EAGAIN to the delivery function already), and the caller is now responsible for producing an abort if that was the last packet. (6) There are many bits of unmarshalling code where: ret = afs_extract_data(call, skb, last, ...); switch (ret) { case 0: break; case -EAGAIN: return 0; default: return ret; } is to be found. As -EAGAIN can now be passed back to the caller, we now just return if ret < 0: ret = afs_extract_data(call, skb, last, ...); if (ret < 0) return ret; (7) Checks for trailing data and empty final data packets has been consolidated as afs_data_complete(). So: if (skb->len > 0) return -EBADMSG; if (!last) return 0; becomes: ret = afs_data_complete(call, skb, last); if (ret < 0) return ret; (8) afs_transfer_reply() now checks the amount of data it has against the amount of data desired and the amount of data in the skb and returns an error to induce an abort if we don't get exactly what we want. Without these changes, the following oops can occasionally be observed, particularly if some printks are inserted into the delivery path: general protection fault: 0000 [#1] SMP Modules linked in: kafs(E) af_rxrpc(E) [last unloaded: af_rxrpc] CPU: 0 PID: 1305 Comm: kworker/u8:3 Tainted: G E 4.7.0-fsdevel+ #1303 Hardware name: ASUS All Series/H97-PLUS, BIOS 2306 10/09/2014 Workqueue: kafsd afs_async_workfn [kafs] task: ffff88040be041c0 ti: ffff88040c070000 task.ti: ffff88040c070000 RIP: 0010:[<ffffffff8108fd3c>] [<ffffffff8108fd3c>] __lock_acquire+0xcf/0x15a1 RSP: 0018:ffff88040c073bc0 EFLAGS: 00010002 RAX: 6b6b6b6b6b6b6b6b RBX: 0000000000000000 RCX: ffff88040d29a710 RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffff88040d29a710 RBP: ffff88040c073c70 R08: 0000000000000001 R09: 0000000000000001 R10: 0000000000000001 R11: 0000000000000000 R12: 0000000000000000 R13: 0000000000000000 R14: ffff88040be041c0 R15: ffffffff814c928f FS: 0000000000000000(0000) GS:ffff88041fa00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fa4595f4750 CR3: 0000000001c14000 CR4: 00000000001406f0 Stack: 0000000000000006 000000000be04930 0000000000000000 ffff880400000000 ffff880400000000 ffffffff8108f847 ffff88040be041c0 ffffffff81050446 ffff8803fc08a920 ffff8803fc08a958 ffff88040be041c0 ffff88040c073c38 Call Trace: [<ffffffff8108f847>] ? mark_held_locks+0x5e/0x74 [<ffffffff81050446>] ? __local_bh_enable_ip+0x9b/0xa1 [<ffffffff8108f9ca>] ? trace_hardirqs_on_caller+0x16d/0x189 [<ffffffff810915f4>] lock_acquire+0x122/0x1b6 [<ffffffff810915f4>] ? lock_acquire+0x122/0x1b6 [<ffffffff814c928f>] ? skb_dequeue+0x18/0x61 [<ffffffff81609dbf>] _raw_spin_lock_irqsave+0x35/0x49 [<ffffffff814c928f>] ? skb_dequeue+0x18/0x61 [<ffffffff814c928f>] skb_dequeue+0x18/0x61 [<ffffffffa009aa92>] afs_deliver_to_call+0x344/0x39d [kafs] [<ffffffffa009ab37>] afs_process_async_call+0x4c/0xd5 [kafs] [<ffffffffa0099e9c>] afs_async_workfn+0xe/0x10 [kafs] [<ffffffff81063a3a>] process_one_work+0x29d/0x57c [<ffffffff81064ac2>] worker_thread+0x24a/0x385 [<ffffffff81064878>] ? rescuer_thread+0x2d0/0x2d0 [<ffffffff810696f5>] kthread+0xf3/0xfb [<ffffffff8160a6ff>] ret_from_fork+0x1f/0x40 [<ffffffff81069602>] ? kthread_create_on_node+0x1cf/0x1cf Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> diff 372ee163 Wed Aug 03 07:11:40 MDT 2016 David Howells <dhowells@redhat.com> rxrpc: Fix races between skb free, ACK generation and replying Inside the kafs filesystem it is possible to occasionally have a call processed and terminated before we've had a chance to check whether we need to clean up the rx queue for that call because afs_send_simple_reply() ends the call when it is done, but this is done in a workqueue item that might happen to run to completion before afs_deliver_to_call() completes. Further, it is possible for rxrpc_kernel_send_data() to be called to send a reply before the last request-phase data skb is released. The rxrpc skb destructor is where the ACK processing is done and the call state is advanced upon release of the last skb. ACK generation is also deferred to a work item because it's possible that the skb destructor is not called in a context where kernel_sendmsg() can be invoked. To this end, the following changes are made: (1) kernel_rxrpc_data_consumed() is added. This should be called whenever an skb is emptied so as to crank the ACK and call states. This does not release the skb, however. kernel_rxrpc_free_skb() must now be called to achieve that. These together replace rxrpc_kernel_data_delivered(). (2) kernel_rxrpc_data_consumed() is wrapped by afs_data_consumed(). This makes afs_deliver_to_call() easier to work as the skb can simply be discarded unconditionally here without trying to work out what the return value of the ->deliver() function means. The ->deliver() functions can, via afs_data_complete(), afs_transfer_reply() and afs_extract_data() mark that an skb has been consumed (thereby cranking the state) without the need to conditionally free the skb to make sure the state is correct on an incoming call for when the call processor tries to send the reply. (3) rxrpc_recvmsg() now has to call kernel_rxrpc_data_consumed() when it has finished with a packet and MSG_PEEK isn't set. (4) rxrpc_packet_destructor() no longer calls rxrpc_hard_ACK_data(). Because of this, we no longer need to clear the destructor and put the call before we free the skb in cases where we don't want the ACK/call state to be cranked. (5) The ->deliver() call-type callbacks are made to return -EAGAIN rather than 0 if they expect more data (afs_extract_data() returns -EAGAIN to the delivery function already), and the caller is now responsible for producing an abort if that was the last packet. (6) There are many bits of unmarshalling code where: ret = afs_extract_data(call, skb, last, ...); switch (ret) { case 0: break; case -EAGAIN: return 0; default: return ret; } is to be found. As -EAGAIN can now be passed back to the caller, we now just return if ret < 0: ret = afs_extract_data(call, skb, last, ...); if (ret < 0) return ret; (7) Checks for trailing data and empty final data packets has been consolidated as afs_data_complete(). So: if (skb->len > 0) return -EBADMSG; if (!last) return 0; becomes: ret = afs_data_complete(call, skb, last); if (ret < 0) return ret; (8) afs_transfer_reply() now checks the amount of data it has against the amount of data desired and the amount of data in the skb and returns an error to induce an abort if we don't get exactly what we want. Without these changes, the following oops can occasionally be observed, particularly if some printks are inserted into the delivery path: general protection fault: 0000 [#1] SMP Modules linked in: kafs(E) af_rxrpc(E) [last unloaded: af_rxrpc] CPU: 0 PID: 1305 Comm: kworker/u8:3 Tainted: G E 4.7.0-fsdevel+ #1303 Hardware name: ASUS All Series/H97-PLUS, BIOS 2306 10/09/2014 Workqueue: kafsd afs_async_workfn [kafs] task: ffff88040be041c0 ti: ffff88040c070000 task.ti: ffff88040c070000 RIP: 0010:[<ffffffff8108fd3c>] [<ffffffff8108fd3c>] __lock_acquire+0xcf/0x15a1 RSP: 0018:ffff88040c073bc0 EFLAGS: 00010002 RAX: 6b6b6b6b6b6b6b6b RBX: 0000000000000000 RCX: ffff88040d29a710 RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffff88040d29a710 RBP: ffff88040c073c70 R08: 0000000000000001 R09: 0000000000000001 R10: 0000000000000001 R11: 0000000000000000 R12: 0000000000000000 R13: 0000000000000000 R14: ffff88040be041c0 R15: ffffffff814c928f FS: 0000000000000000(0000) GS:ffff88041fa00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fa4595f4750 CR3: 0000000001c14000 CR4: 00000000001406f0 Stack: 0000000000000006 000000000be04930 0000000000000000 ffff880400000000 ffff880400000000 ffffffff8108f847 ffff88040be041c0 ffffffff81050446 ffff8803fc08a920 ffff8803fc08a958 ffff88040be041c0 ffff88040c073c38 Call Trace: [<ffffffff8108f847>] ? mark_held_locks+0x5e/0x74 [<ffffffff81050446>] ? __local_bh_enable_ip+0x9b/0xa1 [<ffffffff8108f9ca>] ? trace_hardirqs_on_caller+0x16d/0x189 [<ffffffff810915f4>] lock_acquire+0x122/0x1b6 [<ffffffff810915f4>] ? lock_acquire+0x122/0x1b6 [<ffffffff814c928f>] ? skb_dequeue+0x18/0x61 [<ffffffff81609dbf>] _raw_spin_lock_irqsave+0x35/0x49 [<ffffffff814c928f>] ? skb_dequeue+0x18/0x61 [<ffffffff814c928f>] skb_dequeue+0x18/0x61 [<ffffffffa009aa92>] afs_deliver_to_call+0x344/0x39d [kafs] [<ffffffffa009ab37>] afs_process_async_call+0x4c/0xd5 [kafs] [<ffffffffa0099e9c>] afs_async_workfn+0xe/0x10 [kafs] [<ffffffff81063a3a>] process_one_work+0x29d/0x57c [<ffffffff81064ac2>] worker_thread+0x24a/0x385 [<ffffffff81064878>] ? rescuer_thread+0x2d0/0x2d0 [<ffffffff810696f5>] kthread+0xf3/0xfb [<ffffffff8160a6ff>] ret_from_fork+0x1f/0x40 [<ffffffff81069602>] ? kthread_create_on_node+0x1cf/0x1cf Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> diff 372ee163 Wed Aug 03 07:11:40 MDT 2016 David Howells <dhowells@redhat.com> rxrpc: Fix races between skb free, ACK generation and replying Inside the kafs filesystem it is possible to occasionally have a call processed and terminated before we've had a chance to check whether we need to clean up the rx queue for that call because afs_send_simple_reply() ends the call when it is done, but this is done in a workqueue item that might happen to run to completion before afs_deliver_to_call() completes. Further, it is possible for rxrpc_kernel_send_data() to be called to send a reply before the last request-phase data skb is released. The rxrpc skb destructor is where the ACK processing is done and the call state is advanced upon release of the last skb. ACK generation is also deferred to a work item because it's possible that the skb destructor is not called in a context where kernel_sendmsg() can be invoked. To this end, the following changes are made: (1) kernel_rxrpc_data_consumed() is added. This should be called whenever an skb is emptied so as to crank the ACK and call states. This does not release the skb, however. kernel_rxrpc_free_skb() must now be called to achieve that. These together replace rxrpc_kernel_data_delivered(). (2) kernel_rxrpc_data_consumed() is wrapped by afs_data_consumed(). This makes afs_deliver_to_call() easier to work as the skb can simply be discarded unconditionally here without trying to work out what the return value of the ->deliver() function means. The ->deliver() functions can, via afs_data_complete(), afs_transfer_reply() and afs_extract_data() mark that an skb has been consumed (thereby cranking the state) without the need to conditionally free the skb to make sure the state is correct on an incoming call for when the call processor tries to send the reply. (3) rxrpc_recvmsg() now has to call kernel_rxrpc_data_consumed() when it has finished with a packet and MSG_PEEK isn't set. (4) rxrpc_packet_destructor() no longer calls rxrpc_hard_ACK_data(). Because of this, we no longer need to clear the destructor and put the call before we free the skb in cases where we don't want the ACK/call state to be cranked. (5) The ->deliver() call-type callbacks are made to return -EAGAIN rather than 0 if they expect more data (afs_extract_data() returns -EAGAIN to the delivery function already), and the caller is now responsible for producing an abort if that was the last packet. (6) There are many bits of unmarshalling code where: ret = afs_extract_data(call, skb, last, ...); switch (ret) { case 0: break; case -EAGAIN: return 0; default: return ret; } is to be found. As -EAGAIN can now be passed back to the caller, we now just return if ret < 0: ret = afs_extract_data(call, skb, last, ...); if (ret < 0) return ret; (7) Checks for trailing data and empty final data packets has been consolidated as afs_data_complete(). So: if (skb->len > 0) return -EBADMSG; if (!last) return 0; becomes: ret = afs_data_complete(call, skb, last); if (ret < 0) return ret; (8) afs_transfer_reply() now checks the amount of data it has against the amount of data desired and the amount of data in the skb and returns an error to induce an abort if we don't get exactly what we want. Without these changes, the following oops can occasionally be observed, particularly if some printks are inserted into the delivery path: general protection fault: 0000 [#1] SMP Modules linked in: kafs(E) af_rxrpc(E) [last unloaded: af_rxrpc] CPU: 0 PID: 1305 Comm: kworker/u8:3 Tainted: G E 4.7.0-fsdevel+ #1303 Hardware name: ASUS All Series/H97-PLUS, BIOS 2306 10/09/2014 Workqueue: kafsd afs_async_workfn [kafs] task: ffff88040be041c0 ti: ffff88040c070000 task.ti: ffff88040c070000 RIP: 0010:[<ffffffff8108fd3c>] [<ffffffff8108fd3c>] __lock_acquire+0xcf/0x15a1 RSP: 0018:ffff88040c073bc0 EFLAGS: 00010002 RAX: 6b6b6b6b6b6b6b6b RBX: 0000000000000000 RCX: ffff88040d29a710 RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffff88040d29a710 RBP: ffff88040c073c70 R08: 0000000000000001 R09: 0000000000000001 R10: 0000000000000001 R11: 0000000000000000 R12: 0000000000000000 R13: 0000000000000000 R14: ffff88040be041c0 R15: ffffffff814c928f FS: 0000000000000000(0000) GS:ffff88041fa00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fa4595f4750 CR3: 0000000001c14000 CR4: 00000000001406f0 Stack: 0000000000000006 000000000be04930 0000000000000000 ffff880400000000 ffff880400000000 ffffffff8108f847 ffff88040be041c0 ffffffff81050446 ffff8803fc08a920 ffff8803fc08a958 ffff88040be041c0 ffff88040c073c38 Call Trace: [<ffffffff8108f847>] ? mark_held_locks+0x5e/0x74 [<ffffffff81050446>] ? __local_bh_enable_ip+0x9b/0xa1 [<ffffffff8108f9ca>] ? trace_hardirqs_on_caller+0x16d/0x189 [<ffffffff810915f4>] lock_acquire+0x122/0x1b6 [<ffffffff810915f4>] ? lock_acquire+0x122/0x1b6 [<ffffffff814c928f>] ? skb_dequeue+0x18/0x61 [<ffffffff81609dbf>] _raw_spin_lock_irqsave+0x35/0x49 [<ffffffff814c928f>] ? skb_dequeue+0x18/0x61 [<ffffffff814c928f>] skb_dequeue+0x18/0x61 [<ffffffffa009aa92>] afs_deliver_to_call+0x344/0x39d [kafs] [<ffffffffa009ab37>] afs_process_async_call+0x4c/0xd5 [kafs] [<ffffffffa0099e9c>] afs_async_workfn+0xe/0x10 [kafs] [<ffffffff81063a3a>] process_one_work+0x29d/0x57c [<ffffffff81064ac2>] worker_thread+0x24a/0x385 [<ffffffff81064878>] ? rescuer_thread+0x2d0/0x2d0 [<ffffffff810696f5>] kthread+0xf3/0xfb [<ffffffff8160a6ff>] ret_from_fork+0x1f/0x40 [<ffffffff81069602>] ? kthread_create_on_node+0x1cf/0x1cf Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> diff 372ee163 Wed Aug 03 07:11:40 MDT 2016 David Howells <dhowells@redhat.com> rxrpc: Fix races between skb free, ACK generation and replying Inside the kafs filesystem it is possible to occasionally have a call processed and terminated before we've had a chance to check whether we need to clean up the rx queue for that call because afs_send_simple_reply() ends the call when it is done, but this is done in a workqueue item that might happen to run to completion before afs_deliver_to_call() completes. Further, it is possible for rxrpc_kernel_send_data() to be called to send a reply before the last request-phase data skb is released. The rxrpc skb destructor is where the ACK processing is done and the call state is advanced upon release of the last skb. ACK generation is also deferred to a work item because it's possible that the skb destructor is not called in a context where kernel_sendmsg() can be invoked. To this end, the following changes are made: (1) kernel_rxrpc_data_consumed() is added. This should be called whenever an skb is emptied so as to crank the ACK and call states. This does not release the skb, however. kernel_rxrpc_free_skb() must now be called to achieve that. These together replace rxrpc_kernel_data_delivered(). (2) kernel_rxrpc_data_consumed() is wrapped by afs_data_consumed(). This makes afs_deliver_to_call() easier to work as the skb can simply be discarded unconditionally here without trying to work out what the return value of the ->deliver() function means. The ->deliver() functions can, via afs_data_complete(), afs_transfer_reply() and afs_extract_data() mark that an skb has been consumed (thereby cranking the state) without the need to conditionally free the skb to make sure the state is correct on an incoming call for when the call processor tries to send the reply. (3) rxrpc_recvmsg() now has to call kernel_rxrpc_data_consumed() when it has finished with a packet and MSG_PEEK isn't set. (4) rxrpc_packet_destructor() no longer calls rxrpc_hard_ACK_data(). Because of this, we no longer need to clear the destructor and put the call before we free the skb in cases where we don't want the ACK/call state to be cranked. (5) The ->deliver() call-type callbacks are made to return -EAGAIN rather than 0 if they expect more data (afs_extract_data() returns -EAGAIN to the delivery function already), and the caller is now responsible for producing an abort if that was the last packet. (6) There are many bits of unmarshalling code where: ret = afs_extract_data(call, skb, last, ...); switch (ret) { case 0: break; case -EAGAIN: return 0; default: return ret; } is to be found. As -EAGAIN can now be passed back to the caller, we now just return if ret < 0: ret = afs_extract_data(call, skb, last, ...); if (ret < 0) return ret; (7) Checks for trailing data and empty final data packets has been consolidated as afs_data_complete(). So: if (skb->len > 0) return -EBADMSG; if (!last) return 0; becomes: ret = afs_data_complete(call, skb, last); if (ret < 0) return ret; (8) afs_transfer_reply() now checks the amount of data it has against the amount of data desired and the amount of data in the skb and returns an error to induce an abort if we don't get exactly what we want. Without these changes, the following oops can occasionally be observed, particularly if some printks are inserted into the delivery path: general protection fault: 0000 [#1] SMP Modules linked in: kafs(E) af_rxrpc(E) [last unloaded: af_rxrpc] CPU: 0 PID: 1305 Comm: kworker/u8:3 Tainted: G E 4.7.0-fsdevel+ #1303 Hardware name: ASUS All Series/H97-PLUS, BIOS 2306 10/09/2014 Workqueue: kafsd afs_async_workfn [kafs] task: ffff88040be041c0 ti: ffff88040c070000 task.ti: ffff88040c070000 RIP: 0010:[<ffffffff8108fd3c>] [<ffffffff8108fd3c>] __lock_acquire+0xcf/0x15a1 RSP: 0018:ffff88040c073bc0 EFLAGS: 00010002 RAX: 6b6b6b6b6b6b6b6b RBX: 0000000000000000 RCX: ffff88040d29a710 RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffff88040d29a710 RBP: ffff88040c073c70 R08: 0000000000000001 R09: 0000000000000001 R10: 0000000000000001 R11: 0000000000000000 R12: 0000000000000000 R13: 0000000000000000 R14: ffff88040be041c0 R15: ffffffff814c928f FS: 0000000000000000(0000) GS:ffff88041fa00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fa4595f4750 CR3: 0000000001c14000 CR4: 00000000001406f0 Stack: 0000000000000006 000000000be04930 0000000000000000 ffff880400000000 ffff880400000000 ffffffff8108f847 ffff88040be041c0 ffffffff81050446 ffff8803fc08a920 ffff8803fc08a958 ffff88040be041c0 ffff88040c073c38 Call Trace: [<ffffffff8108f847>] ? mark_held_locks+0x5e/0x74 [<ffffffff81050446>] ? __local_bh_enable_ip+0x9b/0xa1 [<ffffffff8108f9ca>] ? trace_hardirqs_on_caller+0x16d/0x189 [<ffffffff810915f4>] lock_acquire+0x122/0x1b6 [<ffffffff810915f4>] ? lock_acquire+0x122/0x1b6 [<ffffffff814c928f>] ? skb_dequeue+0x18/0x61 [<ffffffff81609dbf>] _raw_spin_lock_irqsave+0x35/0x49 [<ffffffff814c928f>] ? skb_dequeue+0x18/0x61 [<ffffffff814c928f>] skb_dequeue+0x18/0x61 [<ffffffffa009aa92>] afs_deliver_to_call+0x344/0x39d [kafs] [<ffffffffa009ab37>] afs_process_async_call+0x4c/0xd5 [kafs] [<ffffffffa0099e9c>] afs_async_workfn+0xe/0x10 [kafs] [<ffffffff81063a3a>] process_one_work+0x29d/0x57c [<ffffffff81064ac2>] worker_thread+0x24a/0x385 [<ffffffff81064878>] ? rescuer_thread+0x2d0/0x2d0 [<ffffffff810696f5>] kthread+0xf3/0xfb [<ffffffff8160a6ff>] ret_from_fork+0x1f/0x40 [<ffffffff81069602>] ? kthread_create_on_node+0x1cf/0x1cf Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> diff 372ee163 Wed Aug 03 07:11:40 MDT 2016 David Howells <dhowells@redhat.com> rxrpc: Fix races between skb free, ACK generation and replying Inside the kafs filesystem it is possible to occasionally have a call processed and terminated before we've had a chance to check whether we need to clean up the rx queue for that call because afs_send_simple_reply() ends the call when it is done, but this is done in a workqueue item that might happen to run to completion before afs_deliver_to_call() completes. Further, it is possible for rxrpc_kernel_send_data() to be called to send a reply before the last request-phase data skb is released. The rxrpc skb destructor is where the ACK processing is done and the call state is advanced upon release of the last skb. ACK generation is also deferred to a work item because it's possible that the skb destructor is not called in a context where kernel_sendmsg() can be invoked. To this end, the following changes are made: (1) kernel_rxrpc_data_consumed() is added. This should be called whenever an skb is emptied so as to crank the ACK and call states. This does not release the skb, however. kernel_rxrpc_free_skb() must now be called to achieve that. These together replace rxrpc_kernel_data_delivered(). (2) kernel_rxrpc_data_consumed() is wrapped by afs_data_consumed(). This makes afs_deliver_to_call() easier to work as the skb can simply be discarded unconditionally here without trying to work out what the return value of the ->deliver() function means. The ->deliver() functions can, via afs_data_complete(), afs_transfer_reply() and afs_extract_data() mark that an skb has been consumed (thereby cranking the state) without the need to conditionally free the skb to make sure the state is correct on an incoming call for when the call processor tries to send the reply. (3) rxrpc_recvmsg() now has to call kernel_rxrpc_data_consumed() when it has finished with a packet and MSG_PEEK isn't set. (4) rxrpc_packet_destructor() no longer calls rxrpc_hard_ACK_data(). Because of this, we no longer need to clear the destructor and put the call before we free the skb in cases where we don't want the ACK/call state to be cranked. (5) The ->deliver() call-type callbacks are made to return -EAGAIN rather than 0 if they expect more data (afs_extract_data() returns -EAGAIN to the delivery function already), and the caller is now responsible for producing an abort if that was the last packet. (6) There are many bits of unmarshalling code where: ret = afs_extract_data(call, skb, last, ...); switch (ret) { case 0: break; case -EAGAIN: return 0; default: return ret; } is to be found. As -EAGAIN can now be passed back to the caller, we now just return if ret < 0: ret = afs_extract_data(call, skb, last, ...); if (ret < 0) return ret; (7) Checks for trailing data and empty final data packets has been consolidated as afs_data_complete(). So: if (skb->len > 0) return -EBADMSG; if (!last) return 0; becomes: ret = afs_data_complete(call, skb, last); if (ret < 0) return ret; (8) afs_transfer_reply() now checks the amount of data it has against the amount of data desired and the amount of data in the skb and returns an error to induce an abort if we don't get exactly what we want. Without these changes, the following oops can occasionally be observed, particularly if some printks are inserted into the delivery path: general protection fault: 0000 [#1] SMP Modules linked in: kafs(E) af_rxrpc(E) [last unloaded: af_rxrpc] CPU: 0 PID: 1305 Comm: kworker/u8:3 Tainted: G E 4.7.0-fsdevel+ #1303 Hardware name: ASUS All Series/H97-PLUS, BIOS 2306 10/09/2014 Workqueue: kafsd afs_async_workfn [kafs] task: ffff88040be041c0 ti: ffff88040c070000 task.ti: ffff88040c070000 RIP: 0010:[<ffffffff8108fd3c>] [<ffffffff8108fd3c>] __lock_acquire+0xcf/0x15a1 RSP: 0018:ffff88040c073bc0 EFLAGS: 00010002 RAX: 6b6b6b6b6b6b6b6b RBX: 0000000000000000 RCX: ffff88040d29a710 RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffff88040d29a710 RBP: ffff88040c073c70 R08: 0000000000000001 R09: 0000000000000001 R10: 0000000000000001 R11: 0000000000000000 R12: 0000000000000000 R13: 0000000000000000 R14: ffff88040be041c0 R15: ffffffff814c928f FS: 0000000000000000(0000) GS:ffff88041fa00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fa4595f4750 CR3: 0000000001c14000 CR4: 00000000001406f0 Stack: 0000000000000006 000000000be04930 0000000000000000 ffff880400000000 ffff880400000000 ffffffff8108f847 ffff88040be041c0 ffffffff81050446 ffff8803fc08a920 ffff8803fc08a958 ffff88040be041c0 ffff88040c073c38 Call Trace: [<ffffffff8108f847>] ? mark_held_locks+0x5e/0x74 [<ffffffff81050446>] ? __local_bh_enable_ip+0x9b/0xa1 [<ffffffff8108f9ca>] ? trace_hardirqs_on_caller+0x16d/0x189 [<ffffffff810915f4>] lock_acquire+0x122/0x1b6 [<ffffffff810915f4>] ? lock_acquire+0x122/0x1b6 [<ffffffff814c928f>] ? skb_dequeue+0x18/0x61 [<ffffffff81609dbf>] _raw_spin_lock_irqsave+0x35/0x49 [<ffffffff814c928f>] ? skb_dequeue+0x18/0x61 [<ffffffff814c928f>] skb_dequeue+0x18/0x61 [<ffffffffa009aa92>] afs_deliver_to_call+0x344/0x39d [kafs] [<ffffffffa009ab37>] afs_process_async_call+0x4c/0xd5 [kafs] [<ffffffffa0099e9c>] afs_async_workfn+0xe/0x10 [kafs] [<ffffffff81063a3a>] process_one_work+0x29d/0x57c [<ffffffff81064ac2>] worker_thread+0x24a/0x385 [<ffffffff81064878>] ? rescuer_thread+0x2d0/0x2d0 [<ffffffff810696f5>] kthread+0xf3/0xfb [<ffffffff8160a6ff>] ret_from_fork+0x1f/0x40 [<ffffffff81069602>] ? kthread_create_on_node+0x1cf/0x1cf Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> diff 372ee163 Wed Aug 03 07:11:40 MDT 2016 David Howells <dhowells@redhat.com> rxrpc: Fix races between skb free, ACK generation and replying Inside the kafs filesystem it is possible to occasionally have a call processed and terminated before we've had a chance to check whether we need to clean up the rx queue for that call because afs_send_simple_reply() ends the call when it is done, but this is done in a workqueue item that might happen to run to completion before afs_deliver_to_call() completes. Further, it is possible for rxrpc_kernel_send_data() to be called to send a reply before the last request-phase data skb is released. The rxrpc skb destructor is where the ACK processing is done and the call state is advanced upon release of the last skb. ACK generation is also deferred to a work item because it's possible that the skb destructor is not called in a context where kernel_sendmsg() can be invoked. To this end, the following changes are made: (1) kernel_rxrpc_data_consumed() is added. This should be called whenever an skb is emptied so as to crank the ACK and call states. This does not release the skb, however. kernel_rxrpc_free_skb() must now be called to achieve that. These together replace rxrpc_kernel_data_delivered(). (2) kernel_rxrpc_data_consumed() is wrapped by afs_data_consumed(). This makes afs_deliver_to_call() easier to work as the skb can simply be discarded unconditionally here without trying to work out what the return value of the ->deliver() function means. The ->deliver() functions can, via afs_data_complete(), afs_transfer_reply() and afs_extract_data() mark that an skb has been consumed (thereby cranking the state) without the need to conditionally free the skb to make sure the state is correct on an incoming call for when the call processor tries to send the reply. (3) rxrpc_recvmsg() now has to call kernel_rxrpc_data_consumed() when it has finished with a packet and MSG_PEEK isn't set. (4) rxrpc_packet_destructor() no longer calls rxrpc_hard_ACK_data(). Because of this, we no longer need to clear the destructor and put the call before we free the skb in cases where we don't want the ACK/call state to be cranked. (5) The ->deliver() call-type callbacks are made to return -EAGAIN rather than 0 if they expect more data (afs_extract_data() returns -EAGAIN to the delivery function already), and the caller is now responsible for producing an abort if that was the last packet. (6) There are many bits of unmarshalling code where: ret = afs_extract_data(call, skb, last, ...); switch (ret) { case 0: break; case -EAGAIN: return 0; default: return ret; } is to be found. As -EAGAIN can now be passed back to the caller, we now just return if ret < 0: ret = afs_extract_data(call, skb, last, ...); if (ret < 0) return ret; (7) Checks for trailing data and empty final data packets has been consolidated as afs_data_complete(). So: if (skb->len > 0) return -EBADMSG; if (!last) return 0; becomes: ret = afs_data_complete(call, skb, last); if (ret < 0) return ret; (8) afs_transfer_reply() now checks the amount of data it has against the amount of data desired and the amount of data in the skb and returns an error to induce an abort if we don't get exactly what we want. Without these changes, the following oops can occasionally be observed, particularly if some printks are inserted into the delivery path: general protection fault: 0000 [#1] SMP Modules linked in: kafs(E) af_rxrpc(E) [last unloaded: af_rxrpc] CPU: 0 PID: 1305 Comm: kworker/u8:3 Tainted: G E 4.7.0-fsdevel+ #1303 Hardware name: ASUS All Series/H97-PLUS, BIOS 2306 10/09/2014 Workqueue: kafsd afs_async_workfn [kafs] task: ffff88040be041c0 ti: ffff88040c070000 task.ti: ffff88040c070000 RIP: 0010:[<ffffffff8108fd3c>] [<ffffffff8108fd3c>] __lock_acquire+0xcf/0x15a1 RSP: 0018:ffff88040c073bc0 EFLAGS: 00010002 RAX: 6b6b6b6b6b6b6b6b RBX: 0000000000000000 RCX: ffff88040d29a710 RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffff88040d29a710 RBP: ffff88040c073c70 R08: 0000000000000001 R09: 0000000000000001 R10: 0000000000000001 R11: 0000000000000000 R12: 0000000000000000 R13: 0000000000000000 R14: ffff88040be041c0 R15: ffffffff814c928f FS: 0000000000000000(0000) GS:ffff88041fa00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fa4595f4750 CR3: 0000000001c14000 CR4: 00000000001406f0 Stack: 0000000000000006 000000000be04930 0000000000000000 ffff880400000000 ffff880400000000 ffffffff8108f847 ffff88040be041c0 ffffffff81050446 ffff8803fc08a920 ffff8803fc08a958 ffff88040be041c0 ffff88040c073c38 Call Trace: [<ffffffff8108f847>] ? mark_held_locks+0x5e/0x74 [<ffffffff81050446>] ? __local_bh_enable_ip+0x9b/0xa1 [<ffffffff8108f9ca>] ? trace_hardirqs_on_caller+0x16d/0x189 [<ffffffff810915f4>] lock_acquire+0x122/0x1b6 [<ffffffff810915f4>] ? lock_acquire+0x122/0x1b6 [<ffffffff814c928f>] ? skb_dequeue+0x18/0x61 [<ffffffff81609dbf>] _raw_spin_lock_irqsave+0x35/0x49 [<ffffffff814c928f>] ? skb_dequeue+0x18/0x61 [<ffffffff814c928f>] skb_dequeue+0x18/0x61 [<ffffffffa009aa92>] afs_deliver_to_call+0x344/0x39d [kafs] [<ffffffffa009ab37>] afs_process_async_call+0x4c/0xd5 [kafs] [<ffffffffa0099e9c>] afs_async_workfn+0xe/0x10 [kafs] [<ffffffff81063a3a>] process_one_work+0x29d/0x57c [<ffffffff81064ac2>] worker_thread+0x24a/0x385 [<ffffffff81064878>] ? rescuer_thread+0x2d0/0x2d0 [<ffffffff810696f5>] kthread+0xf3/0xfb [<ffffffff8160a6ff>] ret_from_fork+0x1f/0x40 [<ffffffff81069602>] ? kthread_create_on_node+0x1cf/0x1cf Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> diff 372ee163 Wed Aug 03 07:11:40 MDT 2016 David Howells <dhowells@redhat.com> rxrpc: Fix races between skb free, ACK generation and replying Inside the kafs filesystem it is possible to occasionally have a call processed and terminated before we've had a chance to check whether we need to clean up the rx queue for that call because afs_send_simple_reply() ends the call when it is done, but this is done in a workqueue item that might happen to run to completion before afs_deliver_to_call() completes. Further, it is possible for rxrpc_kernel_send_data() to be called to send a reply before the last request-phase data skb is released. The rxrpc skb destructor is where the ACK processing is done and the call state is advanced upon release of the last skb. ACK generation is also deferred to a work item because it's possible that the skb destructor is not called in a context where kernel_sendmsg() can be invoked. To this end, the following changes are made: (1) kernel_rxrpc_data_consumed() is added. This should be called whenever an skb is emptied so as to crank the ACK and call states. This does not release the skb, however. kernel_rxrpc_free_skb() must now be called to achieve that. These together replace rxrpc_kernel_data_delivered(). (2) kernel_rxrpc_data_consumed() is wrapped by afs_data_consumed(). This makes afs_deliver_to_call() easier to work as the skb can simply be discarded unconditionally here without trying to work out what the return value of the ->deliver() function means. The ->deliver() functions can, via afs_data_complete(), afs_transfer_reply() and afs_extract_data() mark that an skb has been consumed (thereby cranking the state) without the need to conditionally free the skb to make sure the state is correct on an incoming call for when the call processor tries to send the reply. (3) rxrpc_recvmsg() now has to call kernel_rxrpc_data_consumed() when it has finished with a packet and MSG_PEEK isn't set. (4) rxrpc_packet_destructor() no longer calls rxrpc_hard_ACK_data(). Because of this, we no longer need to clear the destructor and put the call before we free the skb in cases where we don't want the ACK/call state to be cranked. (5) The ->deliver() call-type callbacks are made to return -EAGAIN rather than 0 if they expect more data (afs_extract_data() returns -EAGAIN to the delivery function already), and the caller is now responsible for producing an abort if that was the last packet. (6) There are many bits of unmarshalling code where: ret = afs_extract_data(call, skb, last, ...); switch (ret) { case 0: break; case -EAGAIN: return 0; default: return ret; } is to be found. As -EAGAIN can now be passed back to the caller, we now just return if ret < 0: ret = afs_extract_data(call, skb, last, ...); if (ret < 0) return ret; (7) Checks for trailing data and empty final data packets has been consolidated as afs_data_complete(). So: if (skb->len > 0) return -EBADMSG; if (!last) return 0; becomes: ret = afs_data_complete(call, skb, last); if (ret < 0) return ret; (8) afs_transfer_reply() now checks the amount of data it has against the amount of data desired and the amount of data in the skb and returns an error to induce an abort if we don't get exactly what we want. Without these changes, the following oops can occasionally be observed, particularly if some printks are inserted into the delivery path: general protection fault: 0000 [#1] SMP Modules linked in: kafs(E) af_rxrpc(E) [last unloaded: af_rxrpc] CPU: 0 PID: 1305 Comm: kworker/u8:3 Tainted: G E 4.7.0-fsdevel+ #1303 Hardware name: ASUS All Series/H97-PLUS, BIOS 2306 10/09/2014 Workqueue: kafsd afs_async_workfn [kafs] task: ffff88040be041c0 ti: ffff88040c070000 task.ti: ffff88040c070000 RIP: 0010:[<ffffffff8108fd3c>] [<ffffffff8108fd3c>] __lock_acquire+0xcf/0x15a1 RSP: 0018:ffff88040c073bc0 EFLAGS: 00010002 RAX: 6b6b6b6b6b6b6b6b RBX: 0000000000000000 RCX: ffff88040d29a710 RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffff88040d29a710 RBP: ffff88040c073c70 R08: 0000000000000001 R09: 0000000000000001 R10: 0000000000000001 R11: 0000000000000000 R12: 0000000000000000 R13: 0000000000000000 R14: ffff88040be041c0 R15: ffffffff814c928f FS: 0000000000000000(0000) GS:ffff88041fa00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fa4595f4750 CR3: 0000000001c14000 CR4: 00000000001406f0 Stack: 0000000000000006 000000000be04930 0000000000000000 ffff880400000000 ffff880400000000 ffffffff8108f847 ffff88040be041c0 ffffffff81050446 ffff8803fc08a920 ffff8803fc08a958 ffff88040be041c0 ffff88040c073c38 Call Trace: [<ffffffff8108f847>] ? mark_held_locks+0x5e/0x74 [<ffffffff81050446>] ? __local_bh_enable_ip+0x9b/0xa1 [<ffffffff8108f9ca>] ? trace_hardirqs_on_caller+0x16d/0x189 [<ffffffff810915f4>] lock_acquire+0x122/0x1b6 [<ffffffff810915f4>] ? lock_acquire+0x122/0x1b6 [<ffffffff814c928f>] ? skb_dequeue+0x18/0x61 [<ffffffff81609dbf>] _raw_spin_lock_irqsave+0x35/0x49 [<ffffffff814c928f>] ? skb_dequeue+0x18/0x61 [<ffffffff814c928f>] skb_dequeue+0x18/0x61 [<ffffffffa009aa92>] afs_deliver_to_call+0x344/0x39d [kafs] [<ffffffffa009ab37>] afs_process_async_call+0x4c/0xd5 [kafs] [<ffffffffa0099e9c>] afs_async_workfn+0xe/0x10 [kafs] [<ffffffff81063a3a>] process_one_work+0x29d/0x57c [<ffffffff81064ac2>] worker_thread+0x24a/0x385 [<ffffffff81064878>] ? rescuer_thread+0x2d0/0x2d0 [<ffffffff810696f5>] kthread+0xf3/0xfb [<ffffffff8160a6ff>] ret_from_fork+0x1f/0x40 [<ffffffff81069602>] ? kthread_create_on_node+0x1cf/0x1cf Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> |
H A D | volume.c | diff 9a6b294a Thu Dec 21 06:57:31 MST 2023 David Howells <dhowells@redhat.com> afs: Fix use-after-free due to get/remove race in volume tree When an afs_volume struct is put, its refcount is reduced to 0 before the cell->volume_lock is taken and the volume removed from the cell->volumes tree. Unfortunately, this means that the lookup code can race and see a volume with a zero ref in the tree, resulting in a use-after-free: refcount_t: addition on 0; use-after-free. WARNING: CPU: 3 PID: 130782 at lib/refcount.c:25 refcount_warn_saturate+0x7a/0xda ... RIP: 0010:refcount_warn_saturate+0x7a/0xda ... Call Trace: afs_get_volume+0x3d/0x55 afs_create_volume+0x126/0x1de afs_validate_fc+0xfe/0x130 afs_get_tree+0x20/0x2e5 vfs_get_tree+0x1d/0xc9 do_new_mount+0x13b/0x22e do_mount+0x5d/0x8a __do_sys_mount+0x100/0x12a do_syscall_64+0x3a/0x94 entry_SYSCALL_64_after_hwframe+0x62/0x6a Fix this by: (1) When putting, use a flag to indicate if the volume has been removed from the tree and skip the rb_erase if it has. (2) When looking up, use a conditional ref increment and if it fails because the refcount is 0, replace the node in the tree and set the removal flag. Fixes: 20325960f875 ("afs: Reorganise volume and server trees to be rooted on the cell") Signed-off-by: David Howells <dhowells@redhat.com> Reviewed-by: Jeffrey Altman <jaltman@auristor.com> cc: Marc Dionne <marc.dionne@auristor.com> cc: linux-afs@lists.infradead.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> diff 9a6b294a Thu Dec 21 06:57:31 MST 2023 David Howells <dhowells@redhat.com> afs: Fix use-after-free due to get/remove race in volume tree When an afs_volume struct is put, its refcount is reduced to 0 before the cell->volume_lock is taken and the volume removed from the cell->volumes tree. Unfortunately, this means that the lookup code can race and see a volume with a zero ref in the tree, resulting in a use-after-free: refcount_t: addition on 0; use-after-free. WARNING: CPU: 3 PID: 130782 at lib/refcount.c:25 refcount_warn_saturate+0x7a/0xda ... RIP: 0010:refcount_warn_saturate+0x7a/0xda ... Call Trace: afs_get_volume+0x3d/0x55 afs_create_volume+0x126/0x1de afs_validate_fc+0xfe/0x130 afs_get_tree+0x20/0x2e5 vfs_get_tree+0x1d/0xc9 do_new_mount+0x13b/0x22e do_mount+0x5d/0x8a __do_sys_mount+0x100/0x12a do_syscall_64+0x3a/0x94 entry_SYSCALL_64_after_hwframe+0x62/0x6a Fix this by: (1) When putting, use a flag to indicate if the volume has been removed from the tree and skip the rb_erase if it has. (2) When looking up, use a conditional ref increment and if it fails because the refcount is 0, replace the node in the tree and set the removal flag. Fixes: 20325960f875 ("afs: Reorganise volume and server trees to be rooted on the cell") Signed-off-by: David Howells <dhowells@redhat.com> Reviewed-by: Jeffrey Altman <jaltman@auristor.com> cc: Marc Dionne <marc.dionne@auristor.com> cc: linux-afs@lists.infradead.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> diff 9a6b294a Thu Dec 21 06:57:31 MST 2023 David Howells <dhowells@redhat.com> afs: Fix use-after-free due to get/remove race in volume tree When an afs_volume struct is put, its refcount is reduced to 0 before the cell->volume_lock is taken and the volume removed from the cell->volumes tree. Unfortunately, this means that the lookup code can race and see a volume with a zero ref in the tree, resulting in a use-after-free: refcount_t: addition on 0; use-after-free. WARNING: CPU: 3 PID: 130782 at lib/refcount.c:25 refcount_warn_saturate+0x7a/0xda ... RIP: 0010:refcount_warn_saturate+0x7a/0xda ... Call Trace: afs_get_volume+0x3d/0x55 afs_create_volume+0x126/0x1de afs_validate_fc+0xfe/0x130 afs_get_tree+0x20/0x2e5 vfs_get_tree+0x1d/0xc9 do_new_mount+0x13b/0x22e do_mount+0x5d/0x8a __do_sys_mount+0x100/0x12a do_syscall_64+0x3a/0x94 entry_SYSCALL_64_after_hwframe+0x62/0x6a Fix this by: (1) When putting, use a flag to indicate if the volume has been removed from the tree and skip the rb_erase if it has. (2) When looking up, use a conditional ref increment and if it fails because the refcount is 0, replace the node in the tree and set the removal flag. Fixes: 20325960f875 ("afs: Reorganise volume and server trees to be rooted on the cell") Signed-off-by: David Howells <dhowells@redhat.com> Reviewed-by: Jeffrey Altman <jaltman@auristor.com> cc: Marc Dionne <marc.dionne@auristor.com> cc: linux-afs@lists.infradead.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> diff 9a6b294a Thu Dec 21 06:57:31 MST 2023 David Howells <dhowells@redhat.com> afs: Fix use-after-free due to get/remove race in volume tree When an afs_volume struct is put, its refcount is reduced to 0 before the cell->volume_lock is taken and the volume removed from the cell->volumes tree. Unfortunately, this means that the lookup code can race and see a volume with a zero ref in the tree, resulting in a use-after-free: refcount_t: addition on 0; use-after-free. WARNING: CPU: 3 PID: 130782 at lib/refcount.c:25 refcount_warn_saturate+0x7a/0xda ... RIP: 0010:refcount_warn_saturate+0x7a/0xda ... Call Trace: afs_get_volume+0x3d/0x55 afs_create_volume+0x126/0x1de afs_validate_fc+0xfe/0x130 afs_get_tree+0x20/0x2e5 vfs_get_tree+0x1d/0xc9 do_new_mount+0x13b/0x22e do_mount+0x5d/0x8a __do_sys_mount+0x100/0x12a do_syscall_64+0x3a/0x94 entry_SYSCALL_64_after_hwframe+0x62/0x6a Fix this by: (1) When putting, use a flag to indicate if the volume has been removed from the tree and skip the rb_erase if it has. (2) When looking up, use a conditional ref increment and if it fails because the refcount is 0, replace the node in the tree and set the removal flag. Fixes: 20325960f875 ("afs: Reorganise volume and server trees to be rooted on the cell") Signed-off-by: David Howells <dhowells@redhat.com> Reviewed-by: Jeffrey Altman <jaltman@auristor.com> cc: Marc Dionne <marc.dionne@auristor.com> cc: linux-afs@lists.infradead.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> diff 9a6b294a Thu Dec 21 06:57:31 MST 2023 David Howells <dhowells@redhat.com> afs: Fix use-after-free due to get/remove race in volume tree When an afs_volume struct is put, its refcount is reduced to 0 before the cell->volume_lock is taken and the volume removed from the cell->volumes tree. Unfortunately, this means that the lookup code can race and see a volume with a zero ref in the tree, resulting in a use-after-free: refcount_t: addition on 0; use-after-free. WARNING: CPU: 3 PID: 130782 at lib/refcount.c:25 refcount_warn_saturate+0x7a/0xda ... RIP: 0010:refcount_warn_saturate+0x7a/0xda ... Call Trace: afs_get_volume+0x3d/0x55 afs_create_volume+0x126/0x1de afs_validate_fc+0xfe/0x130 afs_get_tree+0x20/0x2e5 vfs_get_tree+0x1d/0xc9 do_new_mount+0x13b/0x22e do_mount+0x5d/0x8a __do_sys_mount+0x100/0x12a do_syscall_64+0x3a/0x94 entry_SYSCALL_64_after_hwframe+0x62/0x6a Fix this by: (1) When putting, use a flag to indicate if the volume has been removed from the tree and skip the rb_erase if it has. (2) When looking up, use a conditional ref increment and if it fails because the refcount is 0, replace the node in the tree and set the removal flag. Fixes: 20325960f875 ("afs: Reorganise volume and server trees to be rooted on the cell") Signed-off-by: David Howells <dhowells@redhat.com> Reviewed-by: Jeffrey Altman <jaltman@auristor.com> cc: Marc Dionne <marc.dionne@auristor.com> cc: linux-afs@lists.infradead.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> diff 9a6b294a Thu Dec 21 06:57:31 MST 2023 David Howells <dhowells@redhat.com> afs: Fix use-after-free due to get/remove race in volume tree When an afs_volume struct is put, its refcount is reduced to 0 before the cell->volume_lock is taken and the volume removed from the cell->volumes tree. Unfortunately, this means that the lookup code can race and see a volume with a zero ref in the tree, resulting in a use-after-free: refcount_t: addition on 0; use-after-free. WARNING: CPU: 3 PID: 130782 at lib/refcount.c:25 refcount_warn_saturate+0x7a/0xda ... RIP: 0010:refcount_warn_saturate+0x7a/0xda ... Call Trace: afs_get_volume+0x3d/0x55 afs_create_volume+0x126/0x1de afs_validate_fc+0xfe/0x130 afs_get_tree+0x20/0x2e5 vfs_get_tree+0x1d/0xc9 do_new_mount+0x13b/0x22e do_mount+0x5d/0x8a __do_sys_mount+0x100/0x12a do_syscall_64+0x3a/0x94 entry_SYSCALL_64_after_hwframe+0x62/0x6a Fix this by: (1) When putting, use a flag to indicate if the volume has been removed from the tree and skip the rb_erase if it has. (2) When looking up, use a conditional ref increment and if it fails because the refcount is 0, replace the node in the tree and set the removal flag. Fixes: 20325960f875 ("afs: Reorganise volume and server trees to be rooted on the cell") Signed-off-by: David Howells <dhowells@redhat.com> Reviewed-by: Jeffrey Altman <jaltman@auristor.com> cc: Marc Dionne <marc.dionne@auristor.com> cc: linux-afs@lists.infradead.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> diff 9a6b294a Thu Dec 21 06:57:31 MST 2023 David Howells <dhowells@redhat.com> afs: Fix use-after-free due to get/remove race in volume tree When an afs_volume struct is put, its refcount is reduced to 0 before the cell->volume_lock is taken and the volume removed from the cell->volumes tree. Unfortunately, this means that the lookup code can race and see a volume with a zero ref in the tree, resulting in a use-after-free: refcount_t: addition on 0; use-after-free. WARNING: CPU: 3 PID: 130782 at lib/refcount.c:25 refcount_warn_saturate+0x7a/0xda ... RIP: 0010:refcount_warn_saturate+0x7a/0xda ... Call Trace: afs_get_volume+0x3d/0x55 afs_create_volume+0x126/0x1de afs_validate_fc+0xfe/0x130 afs_get_tree+0x20/0x2e5 vfs_get_tree+0x1d/0xc9 do_new_mount+0x13b/0x22e do_mount+0x5d/0x8a __do_sys_mount+0x100/0x12a do_syscall_64+0x3a/0x94 entry_SYSCALL_64_after_hwframe+0x62/0x6a Fix this by: (1) When putting, use a flag to indicate if the volume has been removed from the tree and skip the rb_erase if it has. (2) When looking up, use a conditional ref increment and if it fails because the refcount is 0, replace the node in the tree and set the removal flag. Fixes: 20325960f875 ("afs: Reorganise volume and server trees to be rooted on the cell") Signed-off-by: David Howells <dhowells@redhat.com> Reviewed-by: Jeffrey Altman <jaltman@auristor.com> cc: Marc Dionne <marc.dionne@auristor.com> cc: linux-afs@lists.infradead.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> diff 9a6b294a Thu Dec 21 06:57:31 MST 2023 David Howells <dhowells@redhat.com> afs: Fix use-after-free due to get/remove race in volume tree When an afs_volume struct is put, its refcount is reduced to 0 before the cell->volume_lock is taken and the volume removed from the cell->volumes tree. Unfortunately, this means that the lookup code can race and see a volume with a zero ref in the tree, resulting in a use-after-free: refcount_t: addition on 0; use-after-free. WARNING: CPU: 3 PID: 130782 at lib/refcount.c:25 refcount_warn_saturate+0x7a/0xda ... RIP: 0010:refcount_warn_saturate+0x7a/0xda ... Call Trace: afs_get_volume+0x3d/0x55 afs_create_volume+0x126/0x1de afs_validate_fc+0xfe/0x130 afs_get_tree+0x20/0x2e5 vfs_get_tree+0x1d/0xc9 do_new_mount+0x13b/0x22e do_mount+0x5d/0x8a __do_sys_mount+0x100/0x12a do_syscall_64+0x3a/0x94 entry_SYSCALL_64_after_hwframe+0x62/0x6a Fix this by: (1) When putting, use a flag to indicate if the volume has been removed from the tree and skip the rb_erase if it has. (2) When looking up, use a conditional ref increment and if it fails because the refcount is 0, replace the node in the tree and set the removal flag. Fixes: 20325960f875 ("afs: Reorganise volume and server trees to be rooted on the cell") Signed-off-by: David Howells <dhowells@redhat.com> Reviewed-by: Jeffrey Altman <jaltman@auristor.com> cc: Marc Dionne <marc.dionne@auristor.com> cc: linux-afs@lists.infradead.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> diff 9a6b294a Thu Dec 21 06:57:31 MST 2023 David Howells <dhowells@redhat.com> afs: Fix use-after-free due to get/remove race in volume tree When an afs_volume struct is put, its refcount is reduced to 0 before the cell->volume_lock is taken and the volume removed from the cell->volumes tree. Unfortunately, this means that the lookup code can race and see a volume with a zero ref in the tree, resulting in a use-after-free: refcount_t: addition on 0; use-after-free. WARNING: CPU: 3 PID: 130782 at lib/refcount.c:25 refcount_warn_saturate+0x7a/0xda ... RIP: 0010:refcount_warn_saturate+0x7a/0xda ... Call Trace: afs_get_volume+0x3d/0x55 afs_create_volume+0x126/0x1de afs_validate_fc+0xfe/0x130 afs_get_tree+0x20/0x2e5 vfs_get_tree+0x1d/0xc9 do_new_mount+0x13b/0x22e do_mount+0x5d/0x8a __do_sys_mount+0x100/0x12a do_syscall_64+0x3a/0x94 entry_SYSCALL_64_after_hwframe+0x62/0x6a Fix this by: (1) When putting, use a flag to indicate if the volume has been removed from the tree and skip the rb_erase if it has. (2) When looking up, use a conditional ref increment and if it fails because the refcount is 0, replace the node in the tree and set the removal flag. Fixes: 20325960f875 ("afs: Reorganise volume and server trees to be rooted on the cell") Signed-off-by: David Howells <dhowells@redhat.com> Reviewed-by: Jeffrey Altman <jaltman@auristor.com> cc: Marc Dionne <marc.dionne@auristor.com> cc: linux-afs@lists.infradead.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> diff 9a6b294a Thu Dec 21 06:57:31 MST 2023 David Howells <dhowells@redhat.com> afs: Fix use-after-free due to get/remove race in volume tree When an afs_volume struct is put, its refcount is reduced to 0 before the cell->volume_lock is taken and the volume removed from the cell->volumes tree. Unfortunately, this means that the lookup code can race and see a volume with a zero ref in the tree, resulting in a use-after-free: refcount_t: addition on 0; use-after-free. WARNING: CPU: 3 PID: 130782 at lib/refcount.c:25 refcount_warn_saturate+0x7a/0xda ... RIP: 0010:refcount_warn_saturate+0x7a/0xda ... Call Trace: afs_get_volume+0x3d/0x55 afs_create_volume+0x126/0x1de afs_validate_fc+0xfe/0x130 afs_get_tree+0x20/0x2e5 vfs_get_tree+0x1d/0xc9 do_new_mount+0x13b/0x22e do_mount+0x5d/0x8a __do_sys_mount+0x100/0x12a do_syscall_64+0x3a/0x94 entry_SYSCALL_64_after_hwframe+0x62/0x6a Fix this by: (1) When putting, use a flag to indicate if the volume has been removed from the tree and skip the rb_erase if it has. (2) When looking up, use a conditional ref increment and if it fails because the refcount is 0, replace the node in the tree and set the removal flag. Fixes: 20325960f875 ("afs: Reorganise volume and server trees to be rooted on the cell") Signed-off-by: David Howells <dhowells@redhat.com> Reviewed-by: Jeffrey Altman <jaltman@auristor.com> cc: Marc Dionne <marc.dionne@auristor.com> cc: linux-afs@lists.infradead.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> diff 9a6b294a Thu Dec 21 06:57:31 MST 2023 David Howells <dhowells@redhat.com> afs: Fix use-after-free due to get/remove race in volume tree When an afs_volume struct is put, its refcount is reduced to 0 before the cell->volume_lock is taken and the volume removed from the cell->volumes tree. Unfortunately, this means that the lookup code can race and see a volume with a zero ref in the tree, resulting in a use-after-free: refcount_t: addition on 0; use-after-free. WARNING: CPU: 3 PID: 130782 at lib/refcount.c:25 refcount_warn_saturate+0x7a/0xda ... RIP: 0010:refcount_warn_saturate+0x7a/0xda ... Call Trace: afs_get_volume+0x3d/0x55 afs_create_volume+0x126/0x1de afs_validate_fc+0xfe/0x130 afs_get_tree+0x20/0x2e5 vfs_get_tree+0x1d/0xc9 do_new_mount+0x13b/0x22e do_mount+0x5d/0x8a __do_sys_mount+0x100/0x12a do_syscall_64+0x3a/0x94 entry_SYSCALL_64_after_hwframe+0x62/0x6a Fix this by: (1) When putting, use a flag to indicate if the volume has been removed from the tree and skip the rb_erase if it has. (2) When looking up, use a conditional ref increment and if it fails because the refcount is 0, replace the node in the tree and set the removal flag. Fixes: 20325960f875 ("afs: Reorganise volume and server trees to be rooted on the cell") Signed-off-by: David Howells <dhowells@redhat.com> Reviewed-by: Jeffrey Altman <jaltman@auristor.com> cc: Marc Dionne <marc.dionne@auristor.com> cc: linux-afs@lists.infradead.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> diff 9a6b294a Thu Dec 21 06:57:31 MST 2023 David Howells <dhowells@redhat.com> afs: Fix use-after-free due to get/remove race in volume tree When an afs_volume struct is put, its refcount is reduced to 0 before the cell->volume_lock is taken and the volume removed from the cell->volumes tree. Unfortunately, this means that the lookup code can race and see a volume with a zero ref in the tree, resulting in a use-after-free: refcount_t: addition on 0; use-after-free. WARNING: CPU: 3 PID: 130782 at lib/refcount.c:25 refcount_warn_saturate+0x7a/0xda ... RIP: 0010:refcount_warn_saturate+0x7a/0xda ... Call Trace: afs_get_volume+0x3d/0x55 afs_create_volume+0x126/0x1de afs_validate_fc+0xfe/0x130 afs_get_tree+0x20/0x2e5 vfs_get_tree+0x1d/0xc9 do_new_mount+0x13b/0x22e do_mount+0x5d/0x8a __do_sys_mount+0x100/0x12a do_syscall_64+0x3a/0x94 entry_SYSCALL_64_after_hwframe+0x62/0x6a Fix this by: (1) When putting, use a flag to indicate if the volume has been removed from the tree and skip the rb_erase if it has. (2) When looking up, use a conditional ref increment and if it fails because the refcount is 0, replace the node in the tree and set the removal flag. Fixes: 20325960f875 ("afs: Reorganise volume and server trees to be rooted on the cell") Signed-off-by: David Howells <dhowells@redhat.com> Reviewed-by: Jeffrey Altman <jaltman@auristor.com> cc: Marc Dionne <marc.dionne@auristor.com> cc: linux-afs@lists.infradead.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> diff 9a6b294a Thu Dec 21 06:57:31 MST 2023 David Howells <dhowells@redhat.com> afs: Fix use-after-free due to get/remove race in volume tree When an afs_volume struct is put, its refcount is reduced to 0 before the cell->volume_lock is taken and the volume removed from the cell->volumes tree. Unfortunately, this means that the lookup code can race and see a volume with a zero ref in the tree, resulting in a use-after-free: refcount_t: addition on 0; use-after-free. WARNING: CPU: 3 PID: 130782 at lib/refcount.c:25 refcount_warn_saturate+0x7a/0xda ... RIP: 0010:refcount_warn_saturate+0x7a/0xda ... Call Trace: afs_get_volume+0x3d/0x55 afs_create_volume+0x126/0x1de afs_validate_fc+0xfe/0x130 afs_get_tree+0x20/0x2e5 vfs_get_tree+0x1d/0xc9 do_new_mount+0x13b/0x22e do_mount+0x5d/0x8a __do_sys_mount+0x100/0x12a do_syscall_64+0x3a/0x94 entry_SYSCALL_64_after_hwframe+0x62/0x6a Fix this by: (1) When putting, use a flag to indicate if the volume has been removed from the tree and skip the rb_erase if it has. (2) When looking up, use a conditional ref increment and if it fails because the refcount is 0, replace the node in the tree and set the removal flag. Fixes: 20325960f875 ("afs: Reorganise volume and server trees to be rooted on the cell") Signed-off-by: David Howells <dhowells@redhat.com> Reviewed-by: Jeffrey Altman <jaltman@auristor.com> cc: Marc Dionne <marc.dionne@auristor.com> cc: linux-afs@lists.infradead.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> diff 9a6b294a Thu Dec 21 06:57:31 MST 2023 David Howells <dhowells@redhat.com> afs: Fix use-after-free due to get/remove race in volume tree When an afs_volume struct is put, its refcount is reduced to 0 before the cell->volume_lock is taken and the volume removed from the cell->volumes tree. Unfortunately, this means that the lookup code can race and see a volume with a zero ref in the tree, resulting in a use-after-free: refcount_t: addition on 0; use-after-free. WARNING: CPU: 3 PID: 130782 at lib/refcount.c:25 refcount_warn_saturate+0x7a/0xda ... RIP: 0010:refcount_warn_saturate+0x7a/0xda ... Call Trace: afs_get_volume+0x3d/0x55 afs_create_volume+0x126/0x1de afs_validate_fc+0xfe/0x130 afs_get_tree+0x20/0x2e5 vfs_get_tree+0x1d/0xc9 do_new_mount+0x13b/0x22e do_mount+0x5d/0x8a __do_sys_mount+0x100/0x12a do_syscall_64+0x3a/0x94 entry_SYSCALL_64_after_hwframe+0x62/0x6a Fix this by: (1) When putting, use a flag to indicate if the volume has been removed from the tree and skip the rb_erase if it has. (2) When looking up, use a conditional ref increment and if it fails because the refcount is 0, replace the node in the tree and set the removal flag. Fixes: 20325960f875 ("afs: Reorganise volume and server trees to be rooted on the cell") Signed-off-by: David Howells <dhowells@redhat.com> Reviewed-by: Jeffrey Altman <jaltman@auristor.com> cc: Marc Dionne <marc.dionne@auristor.com> cc: linux-afs@lists.infradead.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> diff 9a6b294a Thu Dec 21 06:57:31 MST 2023 David Howells <dhowells@redhat.com> afs: Fix use-after-free due to get/remove race in volume tree When an afs_volume struct is put, its refcount is reduced to 0 before the cell->volume_lock is taken and the volume removed from the cell->volumes tree. Unfortunately, this means that the lookup code can race and see a volume with a zero ref in the tree, resulting in a use-after-free: refcount_t: addition on 0; use-after-free. WARNING: CPU: 3 PID: 130782 at lib/refcount.c:25 refcount_warn_saturate+0x7a/0xda ... RIP: 0010:refcount_warn_saturate+0x7a/0xda ... Call Trace: afs_get_volume+0x3d/0x55 afs_create_volume+0x126/0x1de afs_validate_fc+0xfe/0x130 afs_get_tree+0x20/0x2e5 vfs_get_tree+0x1d/0xc9 do_new_mount+0x13b/0x22e do_mount+0x5d/0x8a __do_sys_mount+0x100/0x12a do_syscall_64+0x3a/0x94 entry_SYSCALL_64_after_hwframe+0x62/0x6a Fix this by: (1) When putting, use a flag to indicate if the volume has been removed from the tree and skip the rb_erase if it has. (2) When looking up, use a conditional ref increment and if it fails because the refcount is 0, replace the node in the tree and set the removal flag. Fixes: 20325960f875 ("afs: Reorganise volume and server trees to be rooted on the cell") Signed-off-by: David Howells <dhowells@redhat.com> Reviewed-by: Jeffrey Altman <jaltman@auristor.com> cc: Marc Dionne <marc.dionne@auristor.com> cc: linux-afs@lists.infradead.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> diff 9a6b294a Thu Dec 21 06:57:31 MST 2023 David Howells <dhowells@redhat.com> afs: Fix use-after-free due to get/remove race in volume tree When an afs_volume struct is put, its refcount is reduced to 0 before the cell->volume_lock is taken and the volume removed from the cell->volumes tree. Unfortunately, this means that the lookup code can race and see a volume with a zero ref in the tree, resulting in a use-after-free: refcount_t: addition on 0; use-after-free. WARNING: CPU: 3 PID: 130782 at lib/refcount.c:25 refcount_warn_saturate+0x7a/0xda ... RIP: 0010:refcount_warn_saturate+0x7a/0xda ... Call Trace: afs_get_volume+0x3d/0x55 afs_create_volume+0x126/0x1de afs_validate_fc+0xfe/0x130 afs_get_tree+0x20/0x2e5 vfs_get_tree+0x1d/0xc9 do_new_mount+0x13b/0x22e do_mount+0x5d/0x8a __do_sys_mount+0x100/0x12a do_syscall_64+0x3a/0x94 entry_SYSCALL_64_after_hwframe+0x62/0x6a Fix this by: (1) When putting, use a flag to indicate if the volume has been removed from the tree and skip the rb_erase if it has. (2) When looking up, use a conditional ref increment and if it fails because the refcount is 0, replace the node in the tree and set the removal flag. Fixes: 20325960f875 ("afs: Reorganise volume and server trees to be rooted on the cell") Signed-off-by: David Howells <dhowells@redhat.com> Reviewed-by: Jeffrey Altman <jaltman@auristor.com> cc: Marc Dionne <marc.dionne@auristor.com> cc: linux-afs@lists.infradead.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> diff 9a6b294a Thu Dec 21 06:57:31 MST 2023 David Howells <dhowells@redhat.com> afs: Fix use-after-free due to get/remove race in volume tree When an afs_volume struct is put, its refcount is reduced to 0 before the cell->volume_lock is taken and the volume removed from the cell->volumes tree. Unfortunately, this means that the lookup code can race and see a volume with a zero ref in the tree, resulting in a use-after-free: refcount_t: addition on 0; use-after-free. WARNING: CPU: 3 PID: 130782 at lib/refcount.c:25 refcount_warn_saturate+0x7a/0xda ... RIP: 0010:refcount_warn_saturate+0x7a/0xda ... Call Trace: afs_get_volume+0x3d/0x55 afs_create_volume+0x126/0x1de afs_validate_fc+0xfe/0x130 afs_get_tree+0x20/0x2e5 vfs_get_tree+0x1d/0xc9 do_new_mount+0x13b/0x22e do_mount+0x5d/0x8a __do_sys_mount+0x100/0x12a do_syscall_64+0x3a/0x94 entry_SYSCALL_64_after_hwframe+0x62/0x6a Fix this by: (1) When putting, use a flag to indicate if the volume has been removed from the tree and skip the rb_erase if it has. (2) When looking up, use a conditional ref increment and if it fails because the refcount is 0, replace the node in the tree and set the removal flag. Fixes: 20325960f875 ("afs: Reorganise volume and server trees to be rooted on the cell") Signed-off-by: David Howells <dhowells@redhat.com> Reviewed-by: Jeffrey Altman <jaltman@auristor.com> cc: Marc Dionne <marc.dionne@auristor.com> cc: linux-afs@lists.infradead.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> diff 9a6b294a Thu Dec 21 06:57:31 MST 2023 David Howells <dhowells@redhat.com> afs: Fix use-after-free due to get/remove race in volume tree When an afs_volume struct is put, its refcount is reduced to 0 before the cell->volume_lock is taken and the volume removed from the cell->volumes tree. Unfortunately, this means that the lookup code can race and see a volume with a zero ref in the tree, resulting in a use-after-free: refcount_t: addition on 0; use-after-free. WARNING: CPU: 3 PID: 130782 at lib/refcount.c:25 refcount_warn_saturate+0x7a/0xda ... RIP: 0010:refcount_warn_saturate+0x7a/0xda ... Call Trace: afs_get_volume+0x3d/0x55 afs_create_volume+0x126/0x1de afs_validate_fc+0xfe/0x130 afs_get_tree+0x20/0x2e5 vfs_get_tree+0x1d/0xc9 do_new_mount+0x13b/0x22e do_mount+0x5d/0x8a __do_sys_mount+0x100/0x12a do_syscall_64+0x3a/0x94 entry_SYSCALL_64_after_hwframe+0x62/0x6a Fix this by: (1) When putting, use a flag to indicate if the volume has been removed from the tree and skip the rb_erase if it has. (2) When looking up, use a conditional ref increment and if it fails because the refcount is 0, replace the node in the tree and set the removal flag. Fixes: 20325960f875 ("afs: Reorganise volume and server trees to be rooted on the cell") Signed-off-by: David Howells <dhowells@redhat.com> Reviewed-by: Jeffrey Altman <jaltman@auristor.com> cc: Marc Dionne <marc.dionne@auristor.com> cc: linux-afs@lists.infradead.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> diff 9a6b294a Thu Dec 21 06:57:31 MST 2023 David Howells <dhowells@redhat.com> afs: Fix use-after-free due to get/remove race in volume tree When an afs_volume struct is put, its refcount is reduced to 0 before the cell->volume_lock is taken and the volume removed from the cell->volumes tree. Unfortunately, this means that the lookup code can race and see a volume with a zero ref in the tree, resulting in a use-after-free: refcount_t: addition on 0; use-after-free. WARNING: CPU: 3 PID: 130782 at lib/refcount.c:25 refcount_warn_saturate+0x7a/0xda ... RIP: 0010:refcount_warn_saturate+0x7a/0xda ... Call Trace: afs_get_volume+0x3d/0x55 afs_create_volume+0x126/0x1de afs_validate_fc+0xfe/0x130 afs_get_tree+0x20/0x2e5 vfs_get_tree+0x1d/0xc9 do_new_mount+0x13b/0x22e do_mount+0x5d/0x8a __do_sys_mount+0x100/0x12a do_syscall_64+0x3a/0x94 entry_SYSCALL_64_after_hwframe+0x62/0x6a Fix this by: (1) When putting, use a flag to indicate if the volume has been removed from the tree and skip the rb_erase if it has. (2) When looking up, use a conditional ref increment and if it fails because the refcount is 0, replace the node in the tree and set the removal flag. Fixes: 20325960f875 ("afs: Reorganise volume and server trees to be rooted on the cell") Signed-off-by: David Howells <dhowells@redhat.com> Reviewed-by: Jeffrey Altman <jaltman@auristor.com> cc: Marc Dionne <marc.dionne@auristor.com> cc: linux-afs@lists.infradead.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> diff 9a6b294a Thu Dec 21 06:57:31 MST 2023 David Howells <dhowells@redhat.com> afs: Fix use-after-free due to get/remove race in volume tree When an afs_volume struct is put, its refcount is reduced to 0 before the cell->volume_lock is taken and the volume removed from the cell->volumes tree. Unfortunately, this means that the lookup code can race and see a volume with a zero ref in the tree, resulting in a use-after-free: refcount_t: addition on 0; use-after-free. WARNING: CPU: 3 PID: 130782 at lib/refcount.c:25 refcount_warn_saturate+0x7a/0xda ... RIP: 0010:refcount_warn_saturate+0x7a/0xda ... Call Trace: afs_get_volume+0x3d/0x55 afs_create_volume+0x126/0x1de afs_validate_fc+0xfe/0x130 afs_get_tree+0x20/0x2e5 vfs_get_tree+0x1d/0xc9 do_new_mount+0x13b/0x22e do_mount+0x5d/0x8a __do_sys_mount+0x100/0x12a do_syscall_64+0x3a/0x94 entry_SYSCALL_64_after_hwframe+0x62/0x6a Fix this by: (1) When putting, use a flag to indicate if the volume has been removed from the tree and skip the rb_erase if it has. (2) When looking up, use a conditional ref increment and if it fails because the refcount is 0, replace the node in the tree and set the removal flag. Fixes: 20325960f875 ("afs: Reorganise volume and server trees to be rooted on the cell") Signed-off-by: David Howells <dhowells@redhat.com> Reviewed-by: Jeffrey Altman <jaltman@auristor.com> cc: Marc Dionne <marc.dionne@auristor.com> cc: linux-afs@lists.infradead.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> diff 9a6b294a Thu Dec 21 06:57:31 MST 2023 David Howells <dhowells@redhat.com> afs: Fix use-after-free due to get/remove race in volume tree When an afs_volume struct is put, its refcount is reduced to 0 before the cell->volume_lock is taken and the volume removed from the cell->volumes tree. Unfortunately, this means that the lookup code can race and see a volume with a zero ref in the tree, resulting in a use-after-free: refcount_t: addition on 0; use-after-free. WARNING: CPU: 3 PID: 130782 at lib/refcount.c:25 refcount_warn_saturate+0x7a/0xda ... RIP: 0010:refcount_warn_saturate+0x7a/0xda ... Call Trace: afs_get_volume+0x3d/0x55 afs_create_volume+0x126/0x1de afs_validate_fc+0xfe/0x130 afs_get_tree+0x20/0x2e5 vfs_get_tree+0x1d/0xc9 do_new_mount+0x13b/0x22e do_mount+0x5d/0x8a __do_sys_mount+0x100/0x12a do_syscall_64+0x3a/0x94 entry_SYSCALL_64_after_hwframe+0x62/0x6a Fix this by: (1) When putting, use a flag to indicate if the volume has been removed from the tree and skip the rb_erase if it has. (2) When looking up, use a conditional ref increment and if it fails because the refcount is 0, replace the node in the tree and set the removal flag. Fixes: 20325960f875 ("afs: Reorganise volume and server trees to be rooted on the cell") Signed-off-by: David Howells <dhowells@redhat.com> Reviewed-by: Jeffrey Altman <jaltman@auristor.com> cc: Marc Dionne <marc.dionne@auristor.com> cc: linux-afs@lists.infradead.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> diff 9a6b294a Thu Dec 21 06:57:31 MST 2023 David Howells <dhowells@redhat.com> afs: Fix use-after-free due to get/remove race in volume tree When an afs_volume struct is put, its refcount is reduced to 0 before the cell->volume_lock is taken and the volume removed from the cell->volumes tree. Unfortunately, this means that the lookup code can race and see a volume with a zero ref in the tree, resulting in a use-after-free: refcount_t: addition on 0; use-after-free. WARNING: CPU: 3 PID: 130782 at lib/refcount.c:25 refcount_warn_saturate+0x7a/0xda ... RIP: 0010:refcount_warn_saturate+0x7a/0xda ... Call Trace: afs_get_volume+0x3d/0x55 afs_create_volume+0x126/0x1de afs_validate_fc+0xfe/0x130 afs_get_tree+0x20/0x2e5 vfs_get_tree+0x1d/0xc9 do_new_mount+0x13b/0x22e do_mount+0x5d/0x8a __do_sys_mount+0x100/0x12a do_syscall_64+0x3a/0x94 entry_SYSCALL_64_after_hwframe+0x62/0x6a Fix this by: (1) When putting, use a flag to indicate if the volume has been removed from the tree and skip the rb_erase if it has. (2) When looking up, use a conditional ref increment and if it fails because the refcount is 0, replace the node in the tree and set the removal flag. Fixes: 20325960f875 ("afs: Reorganise volume and server trees to be rooted on the cell") Signed-off-by: David Howells <dhowells@redhat.com> Reviewed-by: Jeffrey Altman <jaltman@auristor.com> cc: Marc Dionne <marc.dionne@auristor.com> cc: linux-afs@lists.infradead.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> diff 9a6b294a Thu Dec 21 06:57:31 MST 2023 David Howells <dhowells@redhat.com> afs: Fix use-after-free due to get/remove race in volume tree When an afs_volume struct is put, its refcount is reduced to 0 before the cell->volume_lock is taken and the volume removed from the cell->volumes tree. Unfortunately, this means that the lookup code can race and see a volume with a zero ref in the tree, resulting in a use-after-free: refcount_t: addition on 0; use-after-free. WARNING: CPU: 3 PID: 130782 at lib/refcount.c:25 refcount_warn_saturate+0x7a/0xda ... RIP: 0010:refcount_warn_saturate+0x7a/0xda ... Call Trace: afs_get_volume+0x3d/0x55 afs_create_volume+0x126/0x1de afs_validate_fc+0xfe/0x130 afs_get_tree+0x20/0x2e5 vfs_get_tree+0x1d/0xc9 do_new_mount+0x13b/0x22e do_mount+0x5d/0x8a __do_sys_mount+0x100/0x12a do_syscall_64+0x3a/0x94 entry_SYSCALL_64_after_hwframe+0x62/0x6a Fix this by: (1) When putting, use a flag to indicate if the volume has been removed from the tree and skip the rb_erase if it has. (2) When looking up, use a conditional ref increment and if it fails because the refcount is 0, replace the node in the tree and set the removal flag. Fixes: 20325960f875 ("afs: Reorganise volume and server trees to be rooted on the cell") Signed-off-by: David Howells <dhowells@redhat.com> Reviewed-by: Jeffrey Altman <jaltman@auristor.com> cc: Marc Dionne <marc.dionne@auristor.com> cc: linux-afs@lists.infradead.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> diff 9a6b294a Thu Dec 21 06:57:31 MST 2023 David Howells <dhowells@redhat.com> afs: Fix use-after-free due to get/remove race in volume tree When an afs_volume struct is put, its refcount is reduced to 0 before the cell->volume_lock is taken and the volume removed from the cell->volumes tree. Unfortunately, this means that the lookup code can race and see a volume with a zero ref in the tree, resulting in a use-after-free: refcount_t: addition on 0; use-after-free. WARNING: CPU: 3 PID: 130782 at lib/refcount.c:25 refcount_warn_saturate+0x7a/0xda ... RIP: 0010:refcount_warn_saturate+0x7a/0xda ... Call Trace: afs_get_volume+0x3d/0x55 afs_create_volume+0x126/0x1de afs_validate_fc+0xfe/0x130 afs_get_tree+0x20/0x2e5 vfs_get_tree+0x1d/0xc9 do_new_mount+0x13b/0x22e do_mount+0x5d/0x8a __do_sys_mount+0x100/0x12a do_syscall_64+0x3a/0x94 entry_SYSCALL_64_after_hwframe+0x62/0x6a Fix this by: (1) When putting, use a flag to indicate if the volume has been removed from the tree and skip the rb_erase if it has. (2) When looking up, use a conditional ref increment and if it fails because the refcount is 0, replace the node in the tree and set the removal flag. Fixes: 20325960f875 ("afs: Reorganise volume and server trees to be rooted on the cell") Signed-off-by: David Howells <dhowells@redhat.com> Reviewed-by: Jeffrey Altman <jaltman@auristor.com> cc: Marc Dionne <marc.dionne@auristor.com> cc: linux-afs@lists.infradead.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> diff 9a6b294a Thu Dec 21 06:57:31 MST 2023 David Howells <dhowells@redhat.com> afs: Fix use-after-free due to get/remove race in volume tree When an afs_volume struct is put, its refcount is reduced to 0 before the cell->volume_lock is taken and the volume removed from the cell->volumes tree. Unfortunately, this means that the lookup code can race and see a volume with a zero ref in the tree, resulting in a use-after-free: refcount_t: addition on 0; use-after-free. WARNING: CPU: 3 PID: 130782 at lib/refcount.c:25 refcount_warn_saturate+0x7a/0xda ... RIP: 0010:refcount_warn_saturate+0x7a/0xda ... Call Trace: afs_get_volume+0x3d/0x55 afs_create_volume+0x126/0x1de afs_validate_fc+0xfe/0x130 afs_get_tree+0x20/0x2e5 vfs_get_tree+0x1d/0xc9 do_new_mount+0x13b/0x22e do_mount+0x5d/0x8a __do_sys_mount+0x100/0x12a do_syscall_64+0x3a/0x94 entry_SYSCALL_64_after_hwframe+0x62/0x6a Fix this by: (1) When putting, use a flag to indicate if the volume has been removed from the tree and skip the rb_erase if it has. (2) When looking up, use a conditional ref increment and if it fails because the refcount is 0, replace the node in the tree and set the removal flag. Fixes: 20325960f875 ("afs: Reorganise volume and server trees to be rooted on the cell") Signed-off-by: David Howells <dhowells@redhat.com> Reviewed-by: Jeffrey Altman <jaltman@auristor.com> cc: Marc Dionne <marc.dionne@auristor.com> cc: linux-afs@lists.infradead.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> diff 9a6b294a Thu Dec 21 06:57:31 MST 2023 David Howells <dhowells@redhat.com> afs: Fix use-after-free due to get/remove race in volume tree When an afs_volume struct is put, its refcount is reduced to 0 before the cell->volume_lock is taken and the volume removed from the cell->volumes tree. Unfortunately, this means that the lookup code can race and see a volume with a zero ref in the tree, resulting in a use-after-free: refcount_t: addition on 0; use-after-free. WARNING: CPU: 3 PID: 130782 at lib/refcount.c:25 refcount_warn_saturate+0x7a/0xda ... RIP: 0010:refcount_warn_saturate+0x7a/0xda ... Call Trace: afs_get_volume+0x3d/0x55 afs_create_volume+0x126/0x1de afs_validate_fc+0xfe/0x130 afs_get_tree+0x20/0x2e5 vfs_get_tree+0x1d/0xc9 do_new_mount+0x13b/0x22e do_mount+0x5d/0x8a __do_sys_mount+0x100/0x12a do_syscall_64+0x3a/0x94 entry_SYSCALL_64_after_hwframe+0x62/0x6a Fix this by: (1) When putting, use a flag to indicate if the volume has been removed from the tree and skip the rb_erase if it has. (2) When looking up, use a conditional ref increment and if it fails because the refcount is 0, replace the node in the tree and set the removal flag. Fixes: 20325960f875 ("afs: Reorganise volume and server trees to be rooted on the cell") Signed-off-by: David Howells <dhowells@redhat.com> Reviewed-by: Jeffrey Altman <jaltman@auristor.com> cc: Marc Dionne <marc.dionne@auristor.com> cc: linux-afs@lists.infradead.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> diff 9a6b294a Thu Dec 21 06:57:31 MST 2023 David Howells <dhowells@redhat.com> afs: Fix use-after-free due to get/remove race in volume tree When an afs_volume struct is put, its refcount is reduced to 0 before the cell->volume_lock is taken and the volume removed from the cell->volumes tree. Unfortunately, this means that the lookup code can race and see a volume with a zero ref in the tree, resulting in a use-after-free: refcount_t: addition on 0; use-after-free. WARNING: CPU: 3 PID: 130782 at lib/refcount.c:25 refcount_warn_saturate+0x7a/0xda ... RIP: 0010:refcount_warn_saturate+0x7a/0xda ... Call Trace: afs_get_volume+0x3d/0x55 afs_create_volume+0x126/0x1de afs_validate_fc+0xfe/0x130 afs_get_tree+0x20/0x2e5 vfs_get_tree+0x1d/0xc9 do_new_mount+0x13b/0x22e do_mount+0x5d/0x8a __do_sys_mount+0x100/0x12a do_syscall_64+0x3a/0x94 entry_SYSCALL_64_after_hwframe+0x62/0x6a Fix this by: (1) When putting, use a flag to indicate if the volume has been removed from the tree and skip the rb_erase if it has. (2) When looking up, use a conditional ref increment and if it fails because the refcount is 0, replace the node in the tree and set the removal flag. Fixes: 20325960f875 ("afs: Reorganise volume and server trees to be rooted on the cell") Signed-off-by: David Howells <dhowells@redhat.com> Reviewed-by: Jeffrey Altman <jaltman@auristor.com> cc: Marc Dionne <marc.dionne@auristor.com> cc: linux-afs@lists.infradead.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
H A D | cell.c | diff 523d27cd Thu Feb 06 07:22:21 MST 2020 David Howells <dhowells@redhat.com> afs: Convert afs to use the new fscache API Change the afs filesystem to support the new afs driver. The following changes have been made: (1) The fscache_netfs struct is no more, and there's no need to register the filesystem as a whole. There's also no longer a cell cookie. (2) The volume cookie is now an fscache_volume cookie, allocated with fscache_acquire_volume(). This function takes three parameters: a string representing the "volume" in the index, a string naming the cache to use (or NULL) and a u64 that conveys coherency metadata for the volume. For afs, I've made it render the volume name string as: "afs,<cell>,<volume_id>" and the coherency data is currently 0. (3) The fscache_cookie_def is no more and needed information is passed directly to fscache_acquire_cookie(). The cache no longer calls back into the filesystem, but rather metadata changes are indicated at other times. fscache_acquire_cookie() is passed the same keying and coherency information as before, except that these are now stored in big endian form instead of cpu endian. This makes the cache more copyable. (4) fscache_use_cookie() and fscache_unuse_cookie() are called when a file is opened or closed to prevent a cache file from being culled and to keep resources to hand that are needed to do I/O. fscache_use_cookie() is given an indication if the cache is likely to be modified locally (e.g. the file is open for writing). fscache_unuse_cookie() is given a coherency update if we had the file open for writing and will update that. (5) fscache_invalidate() is now given uptodate auxiliary data and a file size. It can also take a flag to indicate if this was due to a DIO write. This is wrapped into afs_fscache_invalidate() now for convenience. (6) fscache_resize() now gets called from the finalisation of afs_setattr(), and afs_setattr() does use/unuse of the cookie around the call to support this. (7) fscache_note_page_release() is called from afs_release_page(). (8) Use a killable wait in nfs_vm_page_mkwrite() when waiting for PG_fscache to be cleared. Render the parts of the cookie key for an afs inode cookie as big endian. Changes ======= ver #2: - Use gfpflags_allow_blocking() rather than using flag directly. - fscache_acquire_volume() now returns errors. Signed-off-by: David Howells <dhowells@redhat.com> Acked-by: Jeff Layton <jlayton@kernel.org> Tested-by: kafs-testing@auristor.com cc: Marc Dionne <marc.dionne@auristor.com> cc: linux-afs@lists.infradead.org cc: linux-cachefs@redhat.com Link: https://lore.kernel.org/r/163819661382.215744.1485608824741611837.stgit@warthog.procyon.org.uk/ # v1 Link: https://lore.kernel.org/r/163906970002.143852.17678518584089878259.stgit@warthog.procyon.org.uk/ # v2 Link: https://lore.kernel.org/r/163967174665.1823006.1301789965454084220.stgit@warthog.procyon.org.uk/ # v3 Link: https://lore.kernel.org/r/164021568841.640689.6684240152253400380.stgit@warthog.procyon.org.uk/ # v4 diff 6e0e99d5 Thu Sep 02 09:43:10 MDT 2021 David Howells <dhowells@redhat.com> afs: Fix mmap coherency vs 3rd-party changes Fix the coherency management of mmap'd data such that 3rd-party changes become visible as soon as possible after the callback notification is delivered by the fileserver. This is done by the following means: (1) When we break a callback on a vnode specified by the CB.CallBack call from the server, we queue a work item (vnode->cb_work) to go and clobber all the PTEs mapping to that inode. This causes the CPU to trip through the ->map_pages() and ->page_mkwrite() handlers if userspace attempts to access the page(s) again. (Ideally, this would be done in the service handler for CB.CallBack, but the server is waiting for our reply before considering, and we have a list of vnodes, all of which need breaking - and the process of getting the mmap_lock and stripping the PTEs on all CPUs could be quite slow.) (2) Call afs_validate() from the ->map_pages() handler to check to see if the file has changed and to get a new callback promise from the server. Also handle the fileserver telling us that it's dropping all callbacks, possibly after it's been restarted by sending us a CB.InitCallBackState* call by the following means: (3) Maintain a per-cell list of afs files that are currently mmap'd (cell->fs_open_mmaps). (4) Add a work item to each server that is invoked if there are any open mmaps when CB.InitCallBackState happens. This work item goes through the aforementioned list and invokes the vnode->cb_work work item for each one that is currently using this server. This causes the PTEs to be cleared, causing ->map_pages() or ->page_mkwrite() to be called again, thereby calling afs_validate() again. I've chosen to simply strip the PTEs at the point of notification reception rather than invalidate all the pages as well because (a) it's faster, (b) we may get a notification for other reasons than the data being altered (in which case we don't want to clobber the pagecache) and (c) we need to ask the server to find out - and I don't want to wait for the reply before holding up userspace. This was tested using the attached test program: #include <stdbool.h> #include <stdio.h> #include <stdlib.h> #include <unistd.h> #include <fcntl.h> #include <sys/mman.h> int main(int argc, char *argv[]) { size_t size = getpagesize(); unsigned char *p; bool mod = (argc == 3); int fd; if (argc != 2 && argc != 3) { fprintf(stderr, "Format: %s <file> [mod]\n", argv[0]); exit(2); } fd = open(argv[1], mod ? O_RDWR : O_RDONLY); if (fd < 0) { perror(argv[1]); exit(1); } p = mmap(NULL, size, mod ? PROT_READ|PROT_WRITE : PROT_READ, MAP_SHARED, fd, 0); if (p == MAP_FAILED) { perror("mmap"); exit(1); } for (;;) { if (mod) { p[0]++; msync(p, size, MS_ASYNC); fsync(fd); } printf("%02x", p[0]); fflush(stdout); sleep(1); } } It runs in two modes: in one mode, it mmaps a file, then sits in a loop reading the first byte, printing it and sleeping for a second; in the second mode it mmaps a file, then sits in a loop incrementing the first byte and flushing, then printing and sleeping. Two instances of this program can be run on different machines, one doing the reading and one doing the writing. The reader should see the changes made by the writer, but without this patch, they aren't because validity checking is being done lazily - only on entry to the filesystem. Testing the InitCallBackState change is more complicated. The server has to be taken offline, the saved callback state file removed and then the server restarted whilst the reading-mode program continues to run. The client machine then has to poke the server to trigger the InitCallBackState call. Signed-off-by: David Howells <dhowells@redhat.com> Tested-by: Markus Suvanto <markus.suvanto@gmail.com> cc: linux-afs@lists.infradead.org Link: https://lore.kernel.org/r/163111668833.283156.382633263709075739.stgit@warthog.procyon.org.uk/ diff 6e0e99d5 Thu Sep 02 09:43:10 MDT 2021 David Howells <dhowells@redhat.com> afs: Fix mmap coherency vs 3rd-party changes Fix the coherency management of mmap'd data such that 3rd-party changes become visible as soon as possible after the callback notification is delivered by the fileserver. This is done by the following means: (1) When we break a callback on a vnode specified by the CB.CallBack call from the server, we queue a work item (vnode->cb_work) to go and clobber all the PTEs mapping to that inode. This causes the CPU to trip through the ->map_pages() and ->page_mkwrite() handlers if userspace attempts to access the page(s) again. (Ideally, this would be done in the service handler for CB.CallBack, but the server is waiting for our reply before considering, and we have a list of vnodes, all of which need breaking - and the process of getting the mmap_lock and stripping the PTEs on all CPUs could be quite slow.) (2) Call afs_validate() from the ->map_pages() handler to check to see if the file has changed and to get a new callback promise from the server. Also handle the fileserver telling us that it's dropping all callbacks, possibly after it's been restarted by sending us a CB.InitCallBackState* call by the following means: (3) Maintain a per-cell list of afs files that are currently mmap'd (cell->fs_open_mmaps). (4) Add a work item to each server that is invoked if there are any open mmaps when CB.InitCallBackState happens. This work item goes through the aforementioned list and invokes the vnode->cb_work work item for each one that is currently using this server. This causes the PTEs to be cleared, causing ->map_pages() or ->page_mkwrite() to be called again, thereby calling afs_validate() again. I've chosen to simply strip the PTEs at the point of notification reception rather than invalidate all the pages as well because (a) it's faster, (b) we may get a notification for other reasons than the data being altered (in which case we don't want to clobber the pagecache) and (c) we need to ask the server to find out - and I don't want to wait for the reply before holding up userspace. This was tested using the attached test program: #include <stdbool.h> #include <stdio.h> #include <stdlib.h> #include <unistd.h> #include <fcntl.h> #include <sys/mman.h> int main(int argc, char *argv[]) { size_t size = getpagesize(); unsigned char *p; bool mod = (argc == 3); int fd; if (argc != 2 && argc != 3) { fprintf(stderr, "Format: %s <file> [mod]\n", argv[0]); exit(2); } fd = open(argv[1], mod ? O_RDWR : O_RDONLY); if (fd < 0) { perror(argv[1]); exit(1); } p = mmap(NULL, size, mod ? PROT_READ|PROT_WRITE : PROT_READ, MAP_SHARED, fd, 0); if (p == MAP_FAILED) { perror("mmap"); exit(1); } for (;;) { if (mod) { p[0]++; msync(p, size, MS_ASYNC); fsync(fd); } printf("%02x", p[0]); fflush(stdout); sleep(1); } } It runs in two modes: in one mode, it mmaps a file, then sits in a loop reading the first byte, printing it and sleeping for a second; in the second mode it mmaps a file, then sits in a loop incrementing the first byte and flushing, then printing and sleeping. Two instances of this program can be run on different machines, one doing the reading and one doing the writing. The reader should see the changes made by the writer, but without this patch, they aren't because validity checking is being done lazily - only on entry to the filesystem. Testing the InitCallBackState change is more complicated. The server has to be taken offline, the saved callback state file removed and then the server restarted whilst the reading-mode program continues to run. The client machine then has to poke the server to trigger the InitCallBackState call. Signed-off-by: David Howells <dhowells@redhat.com> Tested-by: Markus Suvanto <markus.suvanto@gmail.com> cc: linux-afs@lists.infradead.org Link: https://lore.kernel.org/r/163111668833.283156.382633263709075739.stgit@warthog.procyon.org.uk/ diff 6e0e99d5 Thu Sep 02 09:43:10 MDT 2021 David Howells <dhowells@redhat.com> afs: Fix mmap coherency vs 3rd-party changes Fix the coherency management of mmap'd data such that 3rd-party changes become visible as soon as possible after the callback notification is delivered by the fileserver. This is done by the following means: (1) When we break a callback on a vnode specified by the CB.CallBack call from the server, we queue a work item (vnode->cb_work) to go and clobber all the PTEs mapping to that inode. This causes the CPU to trip through the ->map_pages() and ->page_mkwrite() handlers if userspace attempts to access the page(s) again. (Ideally, this would be done in the service handler for CB.CallBack, but the server is waiting for our reply before considering, and we have a list of vnodes, all of which need breaking - and the process of getting the mmap_lock and stripping the PTEs on all CPUs could be quite slow.) (2) Call afs_validate() from the ->map_pages() handler to check to see if the file has changed and to get a new callback promise from the server. Also handle the fileserver telling us that it's dropping all callbacks, possibly after it's been restarted by sending us a CB.InitCallBackState* call by the following means: (3) Maintain a per-cell list of afs files that are currently mmap'd (cell->fs_open_mmaps). (4) Add a work item to each server that is invoked if there are any open mmaps when CB.InitCallBackState happens. This work item goes through the aforementioned list and invokes the vnode->cb_work work item for each one that is currently using this server. This causes the PTEs to be cleared, causing ->map_pages() or ->page_mkwrite() to be called again, thereby calling afs_validate() again. I've chosen to simply strip the PTEs at the point of notification reception rather than invalidate all the pages as well because (a) it's faster, (b) we may get a notification for other reasons than the data being altered (in which case we don't want to clobber the pagecache) and (c) we need to ask the server to find out - and I don't want to wait for the reply before holding up userspace. This was tested using the attached test program: #include <stdbool.h> #include <stdio.h> #include <stdlib.h> #include <unistd.h> #include <fcntl.h> #include <sys/mman.h> int main(int argc, char *argv[]) { size_t size = getpagesize(); unsigned char *p; bool mod = (argc == 3); int fd; if (argc != 2 && argc != 3) { fprintf(stderr, "Format: %s <file> [mod]\n", argv[0]); exit(2); } fd = open(argv[1], mod ? O_RDWR : O_RDONLY); if (fd < 0) { perror(argv[1]); exit(1); } p = mmap(NULL, size, mod ? PROT_READ|PROT_WRITE : PROT_READ, MAP_SHARED, fd, 0); if (p == MAP_FAILED) { perror("mmap"); exit(1); } for (;;) { if (mod) { p[0]++; msync(p, size, MS_ASYNC); fsync(fd); } printf("%02x", p[0]); fflush(stdout); sleep(1); } } It runs in two modes: in one mode, it mmaps a file, then sits in a loop reading the first byte, printing it and sleeping for a second; in the second mode it mmaps a file, then sits in a loop incrementing the first byte and flushing, then printing and sleeping. Two instances of this program can be run on different machines, one doing the reading and one doing the writing. The reader should see the changes made by the writer, but without this patch, they aren't because validity checking is being done lazily - only on entry to the filesystem. Testing the InitCallBackState change is more complicated. The server has to be taken offline, the saved callback state file removed and then the server restarted whilst the reading-mode program continues to run. The client machine then has to poke the server to trigger the InitCallBackState call. Signed-off-by: David Howells <dhowells@redhat.com> Tested-by: Markus Suvanto <markus.suvanto@gmail.com> cc: linux-afs@lists.infradead.org Link: https://lore.kernel.org/r/163111668833.283156.382633263709075739.stgit@warthog.procyon.org.uk/ diff 6e0e99d5 Thu Sep 02 09:43:10 MDT 2021 David Howells <dhowells@redhat.com> afs: Fix mmap coherency vs 3rd-party changes Fix the coherency management of mmap'd data such that 3rd-party changes become visible as soon as possible after the callback notification is delivered by the fileserver. This is done by the following means: (1) When we break a callback on a vnode specified by the CB.CallBack call from the server, we queue a work item (vnode->cb_work) to go and clobber all the PTEs mapping to that inode. This causes the CPU to trip through the ->map_pages() and ->page_mkwrite() handlers if userspace attempts to access the page(s) again. (Ideally, this would be done in the service handler for CB.CallBack, but the server is waiting for our reply before considering, and we have a list of vnodes, all of which need breaking - and the process of getting the mmap_lock and stripping the PTEs on all CPUs could be quite slow.) (2) Call afs_validate() from the ->map_pages() handler to check to see if the file has changed and to get a new callback promise from the server. Also handle the fileserver telling us that it's dropping all callbacks, possibly after it's been restarted by sending us a CB.InitCallBackState* call by the following means: (3) Maintain a per-cell list of afs files that are currently mmap'd (cell->fs_open_mmaps). (4) Add a work item to each server that is invoked if there are any open mmaps when CB.InitCallBackState happens. This work item goes through the aforementioned list and invokes the vnode->cb_work work item for each one that is currently using this server. This causes the PTEs to be cleared, causing ->map_pages() or ->page_mkwrite() to be called again, thereby calling afs_validate() again. I've chosen to simply strip the PTEs at the point of notification reception rather than invalidate all the pages as well because (a) it's faster, (b) we may get a notification for other reasons than the data being altered (in which case we don't want to clobber the pagecache) and (c) we need to ask the server to find out - and I don't want to wait for the reply before holding up userspace. This was tested using the attached test program: #include <stdbool.h> #include <stdio.h> #include <stdlib.h> #include <unistd.h> #include <fcntl.h> #include <sys/mman.h> int main(int argc, char *argv[]) { size_t size = getpagesize(); unsigned char *p; bool mod = (argc == 3); int fd; if (argc != 2 && argc != 3) { fprintf(stderr, "Format: %s <file> [mod]\n", argv[0]); exit(2); } fd = open(argv[1], mod ? O_RDWR : O_RDONLY); if (fd < 0) { perror(argv[1]); exit(1); } p = mmap(NULL, size, mod ? PROT_READ|PROT_WRITE : PROT_READ, MAP_SHARED, fd, 0); if (p == MAP_FAILED) { perror("mmap"); exit(1); } for (;;) { if (mod) { p[0]++; msync(p, size, MS_ASYNC); fsync(fd); } printf("%02x", p[0]); fflush(stdout); sleep(1); } } It runs in two modes: in one mode, it mmaps a file, then sits in a loop reading the first byte, printing it and sleeping for a second; in the second mode it mmaps a file, then sits in a loop incrementing the first byte and flushing, then printing and sleeping. Two instances of this program can be run on different machines, one doing the reading and one doing the writing. The reader should see the changes made by the writer, but without this patch, they aren't because validity checking is being done lazily - only on entry to the filesystem. Testing the InitCallBackState change is more complicated. The server has to be taken offline, the saved callback state file removed and then the server restarted whilst the reading-mode program continues to run. The client machine then has to poke the server to trigger the InitCallBackState call. Signed-off-by: David Howells <dhowells@redhat.com> Tested-by: Markus Suvanto <markus.suvanto@gmail.com> cc: linux-afs@lists.infradead.org Link: https://lore.kernel.org/r/163111668833.283156.382633263709075739.stgit@warthog.procyon.org.uk/ diff 6e0e99d5 Thu Sep 02 09:43:10 MDT 2021 David Howells <dhowells@redhat.com> afs: Fix mmap coherency vs 3rd-party changes Fix the coherency management of mmap'd data such that 3rd-party changes become visible as soon as possible after the callback notification is delivered by the fileserver. This is done by the following means: (1) When we break a callback on a vnode specified by the CB.CallBack call from the server, we queue a work item (vnode->cb_work) to go and clobber all the PTEs mapping to that inode. This causes the CPU to trip through the ->map_pages() and ->page_mkwrite() handlers if userspace attempts to access the page(s) again. (Ideally, this would be done in the service handler for CB.CallBack, but the server is waiting for our reply before considering, and we have a list of vnodes, all of which need breaking - and the process of getting the mmap_lock and stripping the PTEs on all CPUs could be quite slow.) (2) Call afs_validate() from the ->map_pages() handler to check to see if the file has changed and to get a new callback promise from the server. Also handle the fileserver telling us that it's dropping all callbacks, possibly after it's been restarted by sending us a CB.InitCallBackState* call by the following means: (3) Maintain a per-cell list of afs files that are currently mmap'd (cell->fs_open_mmaps). (4) Add a work item to each server that is invoked if there are any open mmaps when CB.InitCallBackState happens. This work item goes through the aforementioned list and invokes the vnode->cb_work work item for each one that is currently using this server. This causes the PTEs to be cleared, causing ->map_pages() or ->page_mkwrite() to be called again, thereby calling afs_validate() again. I've chosen to simply strip the PTEs at the point of notification reception rather than invalidate all the pages as well because (a) it's faster, (b) we may get a notification for other reasons than the data being altered (in which case we don't want to clobber the pagecache) and (c) we need to ask the server to find out - and I don't want to wait for the reply before holding up userspace. This was tested using the attached test program: #include <stdbool.h> #include <stdio.h> #include <stdlib.h> #include <unistd.h> #include <fcntl.h> #include <sys/mman.h> int main(int argc, char *argv[]) { size_t size = getpagesize(); unsigned char *p; bool mod = (argc == 3); int fd; if (argc != 2 && argc != 3) { fprintf(stderr, "Format: %s <file> [mod]\n", argv[0]); exit(2); } fd = open(argv[1], mod ? O_RDWR : O_RDONLY); if (fd < 0) { perror(argv[1]); exit(1); } p = mmap(NULL, size, mod ? PROT_READ|PROT_WRITE : PROT_READ, MAP_SHARED, fd, 0); if (p == MAP_FAILED) { perror("mmap"); exit(1); } for (;;) { if (mod) { p[0]++; msync(p, size, MS_ASYNC); fsync(fd); } printf("%02x", p[0]); fflush(stdout); sleep(1); } } It runs in two modes: in one mode, it mmaps a file, then sits in a loop reading the first byte, printing it and sleeping for a second; in the second mode it mmaps a file, then sits in a loop incrementing the first byte and flushing, then printing and sleeping. Two instances of this program can be run on different machines, one doing the reading and one doing the writing. The reader should see the changes made by the writer, but without this patch, they aren't because validity checking is being done lazily - only on entry to the filesystem. Testing the InitCallBackState change is more complicated. The server has to be taken offline, the saved callback state file removed and then the server restarted whilst the reading-mode program continues to run. The client machine then has to poke the server to trigger the InitCallBackState call. Signed-off-by: David Howells <dhowells@redhat.com> Tested-by: Markus Suvanto <markus.suvanto@gmail.com> cc: linux-afs@lists.infradead.org Link: https://lore.kernel.org/r/163111668833.283156.382633263709075739.stgit@warthog.procyon.org.uk/ diff 1d0e850a Fri Oct 16 06:21:14 MDT 2020 David Howells <dhowells@redhat.com> afs: Fix cell removal Fix cell removal by inserting a more final state than AFS_CELL_FAILED that indicates that the cell has been unpublished in case the manager is already requeued and will go through again. The new AFS_CELL_REMOVED state will just immediately leave the manager function. Going through a second time in the AFS_CELL_FAILED state will cause it to try to remove the cell again, potentially leading to the proc list being removed. Fixes: 989782dcdc91 ("afs: Overhaul cell database management") Reported-by: syzbot+b994ecf2b023f14832c1@syzkaller.appspotmail.com Reported-by: syzbot+0e0db88e1eb44a91ae8d@syzkaller.appspotmail.com Reported-by: syzbot+2d0585e5efcd43d113c2@syzkaller.appspotmail.com Reported-by: syzbot+1ecc2f9d3387f1d79d42@syzkaller.appspotmail.com Reported-by: syzbot+18d51774588492bf3f69@syzkaller.appspotmail.com Reported-by: syzbot+a5e4946b04d6ca8fa5f3@syzkaller.appspotmail.com Suggested-by: Hillf Danton <hdanton@sina.com> Signed-off-by: David Howells <dhowells@redhat.com> cc: Hillf Danton <hdanton@sina.com> diff 88c853c3 Tue Jul 23 04:24:59 MDT 2019 David Howells <dhowells@redhat.com> afs: Fix cell refcounting by splitting the usage counter Management of the lifetime of afs_cell struct has some problems due to the usage counter being used to determine whether objects of that type are in use in addition to whether anyone might be interested in the structure. This is made trickier by cell objects being cached for a period of time in case they're quickly reused as they hold the result of a setup process that may be slow (DNS lookups, AFS RPC ops). Problems include the cached root volume from alias resolution pinning its parent cell record, rmmod occasionally hanging and occasionally producing assertion failures. Fix this by splitting the count of active users from the struct reference count. Things then work as follows: (1) The cell cache keeps +1 on the cell's activity count and this has to be dropped before the cell can be removed. afs_manage_cell() tries to exchange the 1 to a 0 with the cells_lock write-locked, and if successful, the record is removed from the net->cells. (2) One struct ref is 'owned' by the activity count. That is put when the active count is reduced to 0 (final_destruction label). (3) A ref can be held on a cell whilst it is queued for management on a work queue without confusing the active count. afs_queue_cell() is added to wrap this. (4) The queue's ref is dropped at the end of the management. This is split out into a separate function, afs_manage_cell_work(). (5) The root volume record is put after a cell is removed (at the final_destruction label) rather then in the RCU destruction routine. (6) Volumes hold struct refs, but aren't active users. (7) Both counts are displayed in /proc/net/afs/cells. There are some management function changes: (*) afs_put_cell() now just decrements the refcount and triggers the RCU destruction if it becomes 0. It no longer sets a timer to have the manager do this. (*) afs_use_cell() and afs_unuse_cell() are added to increase and decrease the active count. afs_unuse_cell() sets the management timer. (*) afs_queue_cell() is added to queue a cell with approprate refs. There are also some other fixes: (*) Don't let /proc/net/afs/cells access a cell's vllist if it's NULL. (*) Make sure that candidate cells in lookups are properly destroyed rather than being simply kfree'd. This ensures the bits it points to are destroyed also. (*) afs_dec_cells_outstanding() is now called in cell destruction rather than at "final_destruction". This ensures that cell->net is still valid to the end of the destructor. (*) As a consequence of the previous two changes, move the increment of net->cells_outstanding that was at the point of insertion into the tree to the allocation routine to correctly balance things. Fixes: 989782dcdc91 ("afs: Overhaul cell database management") Signed-off-by: David Howells <dhowells@redhat.com> diff 88c853c3 Tue Jul 23 04:24:59 MDT 2019 David Howells <dhowells@redhat.com> afs: Fix cell refcounting by splitting the usage counter Management of the lifetime of afs_cell struct has some problems due to the usage counter being used to determine whether objects of that type are in use in addition to whether anyone might be interested in the structure. This is made trickier by cell objects being cached for a period of time in case they're quickly reused as they hold the result of a setup process that may be slow (DNS lookups, AFS RPC ops). Problems include the cached root volume from alias resolution pinning its parent cell record, rmmod occasionally hanging and occasionally producing assertion failures. Fix this by splitting the count of active users from the struct reference count. Things then work as follows: (1) The cell cache keeps +1 on the cell's activity count and this has to be dropped before the cell can be removed. afs_manage_cell() tries to exchange the 1 to a 0 with the cells_lock write-locked, and if successful, the record is removed from the net->cells. (2) One struct ref is 'owned' by the activity count. That is put when the active count is reduced to 0 (final_destruction label). (3) A ref can be held on a cell whilst it is queued for management on a work queue without confusing the active count. afs_queue_cell() is added to wrap this. (4) The queue's ref is dropped at the end of the management. This is split out into a separate function, afs_manage_cell_work(). (5) The root volume record is put after a cell is removed (at the final_destruction label) rather then in the RCU destruction routine. (6) Volumes hold struct refs, but aren't active users. (7) Both counts are displayed in /proc/net/afs/cells. There are some management function changes: (*) afs_put_cell() now just decrements the refcount and triggers the RCU destruction if it becomes 0. It no longer sets a timer to have the manager do this. (*) afs_use_cell() and afs_unuse_cell() are added to increase and decrease the active count. afs_unuse_cell() sets the management timer. (*) afs_queue_cell() is added to queue a cell with approprate refs. There are also some other fixes: (*) Don't let /proc/net/afs/cells access a cell's vllist if it's NULL. (*) Make sure that candidate cells in lookups are properly destroyed rather than being simply kfree'd. This ensures the bits it points to are destroyed also. (*) afs_dec_cells_outstanding() is now called in cell destruction rather than at "final_destruction". This ensures that cell->net is still valid to the end of the destructor. (*) As a consequence of the previous two changes, move the increment of net->cells_outstanding that was at the point of insertion into the tree to the allocation routine to correctly balance things. Fixes: 989782dcdc91 ("afs: Overhaul cell database management") Signed-off-by: David Howells <dhowells@redhat.com> diff 88c853c3 Tue Jul 23 04:24:59 MDT 2019 David Howells <dhowells@redhat.com> afs: Fix cell refcounting by splitting the usage counter Management of the lifetime of afs_cell struct has some problems due to the usage counter being used to determine whether objects of that type are in use in addition to whether anyone might be interested in the structure. This is made trickier by cell objects being cached for a period of time in case they're quickly reused as they hold the result of a setup process that may be slow (DNS lookups, AFS RPC ops). Problems include the cached root volume from alias resolution pinning its parent cell record, rmmod occasionally hanging and occasionally producing assertion failures. Fix this by splitting the count of active users from the struct reference count. Things then work as follows: (1) The cell cache keeps +1 on the cell's activity count and this has to be dropped before the cell can be removed. afs_manage_cell() tries to exchange the 1 to a 0 with the cells_lock write-locked, and if successful, the record is removed from the net->cells. (2) One struct ref is 'owned' by the activity count. That is put when the active count is reduced to 0 (final_destruction label). (3) A ref can be held on a cell whilst it is queued for management on a work queue without confusing the active count. afs_queue_cell() is added to wrap this. (4) The queue's ref is dropped at the end of the management. This is split out into a separate function, afs_manage_cell_work(). (5) The root volume record is put after a cell is removed (at the final_destruction label) rather then in the RCU destruction routine. (6) Volumes hold struct refs, but aren't active users. (7) Both counts are displayed in /proc/net/afs/cells. There are some management function changes: (*) afs_put_cell() now just decrements the refcount and triggers the RCU destruction if it becomes 0. It no longer sets a timer to have the manager do this. (*) afs_use_cell() and afs_unuse_cell() are added to increase and decrease the active count. afs_unuse_cell() sets the management timer. (*) afs_queue_cell() is added to queue a cell with approprate refs. There are also some other fixes: (*) Don't let /proc/net/afs/cells access a cell's vllist if it's NULL. (*) Make sure that candidate cells in lookups are properly destroyed rather than being simply kfree'd. This ensures the bits it points to are destroyed also. (*) afs_dec_cells_outstanding() is now called in cell destruction rather than at "final_destruction". This ensures that cell->net is still valid to the end of the destructor. (*) As a consequence of the previous two changes, move the increment of net->cells_outstanding that was at the point of insertion into the tree to the allocation routine to correctly balance things. Fixes: 989782dcdc91 ("afs: Overhaul cell database management") Signed-off-by: David Howells <dhowells@redhat.com> |
H A D | server.c | diff 6e0e99d5 Thu Sep 02 09:43:10 MDT 2021 David Howells <dhowells@redhat.com> afs: Fix mmap coherency vs 3rd-party changes Fix the coherency management of mmap'd data such that 3rd-party changes become visible as soon as possible after the callback notification is delivered by the fileserver. This is done by the following means: (1) When we break a callback on a vnode specified by the CB.CallBack call from the server, we queue a work item (vnode->cb_work) to go and clobber all the PTEs mapping to that inode. This causes the CPU to trip through the ->map_pages() and ->page_mkwrite() handlers if userspace attempts to access the page(s) again. (Ideally, this would be done in the service handler for CB.CallBack, but the server is waiting for our reply before considering, and we have a list of vnodes, all of which need breaking - and the process of getting the mmap_lock and stripping the PTEs on all CPUs could be quite slow.) (2) Call afs_validate() from the ->map_pages() handler to check to see if the file has changed and to get a new callback promise from the server. Also handle the fileserver telling us that it's dropping all callbacks, possibly after it's been restarted by sending us a CB.InitCallBackState* call by the following means: (3) Maintain a per-cell list of afs files that are currently mmap'd (cell->fs_open_mmaps). (4) Add a work item to each server that is invoked if there are any open mmaps when CB.InitCallBackState happens. This work item goes through the aforementioned list and invokes the vnode->cb_work work item for each one that is currently using this server. This causes the PTEs to be cleared, causing ->map_pages() or ->page_mkwrite() to be called again, thereby calling afs_validate() again. I've chosen to simply strip the PTEs at the point of notification reception rather than invalidate all the pages as well because (a) it's faster, (b) we may get a notification for other reasons than the data being altered (in which case we don't want to clobber the pagecache) and (c) we need to ask the server to find out - and I don't want to wait for the reply before holding up userspace. This was tested using the attached test program: #include <stdbool.h> #include <stdio.h> #include <stdlib.h> #include <unistd.h> #include <fcntl.h> #include <sys/mman.h> int main(int argc, char *argv[]) { size_t size = getpagesize(); unsigned char *p; bool mod = (argc == 3); int fd; if (argc != 2 && argc != 3) { fprintf(stderr, "Format: %s <file> [mod]\n", argv[0]); exit(2); } fd = open(argv[1], mod ? O_RDWR : O_RDONLY); if (fd < 0) { perror(argv[1]); exit(1); } p = mmap(NULL, size, mod ? PROT_READ|PROT_WRITE : PROT_READ, MAP_SHARED, fd, 0); if (p == MAP_FAILED) { perror("mmap"); exit(1); } for (;;) { if (mod) { p[0]++; msync(p, size, MS_ASYNC); fsync(fd); } printf("%02x", p[0]); fflush(stdout); sleep(1); } } It runs in two modes: in one mode, it mmaps a file, then sits in a loop reading the first byte, printing it and sleeping for a second; in the second mode it mmaps a file, then sits in a loop incrementing the first byte and flushing, then printing and sleeping. Two instances of this program can be run on different machines, one doing the reading and one doing the writing. The reader should see the changes made by the writer, but without this patch, they aren't because validity checking is being done lazily - only on entry to the filesystem. Testing the InitCallBackState change is more complicated. The server has to be taken offline, the saved callback state file removed and then the server restarted whilst the reading-mode program continues to run. The client machine then has to poke the server to trigger the InitCallBackState call. Signed-off-by: David Howells <dhowells@redhat.com> Tested-by: Markus Suvanto <markus.suvanto@gmail.com> cc: linux-afs@lists.infradead.org Link: https://lore.kernel.org/r/163111668833.283156.382633263709075739.stgit@warthog.procyon.org.uk/ diff 6e0e99d5 Thu Sep 02 09:43:10 MDT 2021 David Howells <dhowells@redhat.com> afs: Fix mmap coherency vs 3rd-party changes Fix the coherency management of mmap'd data such that 3rd-party changes become visible as soon as possible after the callback notification is delivered by the fileserver. This is done by the following means: (1) When we break a callback on a vnode specified by the CB.CallBack call from the server, we queue a work item (vnode->cb_work) to go and clobber all the PTEs mapping to that inode. This causes the CPU to trip through the ->map_pages() and ->page_mkwrite() handlers if userspace attempts to access the page(s) again. (Ideally, this would be done in the service handler for CB.CallBack, but the server is waiting for our reply before considering, and we have a list of vnodes, all of which need breaking - and the process of getting the mmap_lock and stripping the PTEs on all CPUs could be quite slow.) (2) Call afs_validate() from the ->map_pages() handler to check to see if the file has changed and to get a new callback promise from the server. Also handle the fileserver telling us that it's dropping all callbacks, possibly after it's been restarted by sending us a CB.InitCallBackState* call by the following means: (3) Maintain a per-cell list of afs files that are currently mmap'd (cell->fs_open_mmaps). (4) Add a work item to each server that is invoked if there are any open mmaps when CB.InitCallBackState happens. This work item goes through the aforementioned list and invokes the vnode->cb_work work item for each one that is currently using this server. This causes the PTEs to be cleared, causing ->map_pages() or ->page_mkwrite() to be called again, thereby calling afs_validate() again. I've chosen to simply strip the PTEs at the point of notification reception rather than invalidate all the pages as well because (a) it's faster, (b) we may get a notification for other reasons than the data being altered (in which case we don't want to clobber the pagecache) and (c) we need to ask the server to find out - and I don't want to wait for the reply before holding up userspace. This was tested using the attached test program: #include <stdbool.h> #include <stdio.h> #include <stdlib.h> #include <unistd.h> #include <fcntl.h> #include <sys/mman.h> int main(int argc, char *argv[]) { size_t size = getpagesize(); unsigned char *p; bool mod = (argc == 3); int fd; if (argc != 2 && argc != 3) { fprintf(stderr, "Format: %s <file> [mod]\n", argv[0]); exit(2); } fd = open(argv[1], mod ? O_RDWR : O_RDONLY); if (fd < 0) { perror(argv[1]); exit(1); } p = mmap(NULL, size, mod ? PROT_READ|PROT_WRITE : PROT_READ, MAP_SHARED, fd, 0); if (p == MAP_FAILED) { perror("mmap"); exit(1); } for (;;) { if (mod) { p[0]++; msync(p, size, MS_ASYNC); fsync(fd); } printf("%02x", p[0]); fflush(stdout); sleep(1); } } It runs in two modes: in one mode, it mmaps a file, then sits in a loop reading the first byte, printing it and sleeping for a second; in the second mode it mmaps a file, then sits in a loop incrementing the first byte and flushing, then printing and sleeping. Two instances of this program can be run on different machines, one doing the reading and one doing the writing. The reader should see the changes made by the writer, but without this patch, they aren't because validity checking is being done lazily - only on entry to the filesystem. Testing the InitCallBackState change is more complicated. The server has to be taken offline, the saved callback state file removed and then the server restarted whilst the reading-mode program continues to run. The client machine then has to poke the server to trigger the InitCallBackState call. Signed-off-by: David Howells <dhowells@redhat.com> Tested-by: Markus Suvanto <markus.suvanto@gmail.com> cc: linux-afs@lists.infradead.org Link: https://lore.kernel.org/r/163111668833.283156.382633263709075739.stgit@warthog.procyon.org.uk/ diff 6e0e99d5 Thu Sep 02 09:43:10 MDT 2021 David Howells <dhowells@redhat.com> afs: Fix mmap coherency vs 3rd-party changes Fix the coherency management of mmap'd data such that 3rd-party changes become visible as soon as possible after the callback notification is delivered by the fileserver. This is done by the following means: (1) When we break a callback on a vnode specified by the CB.CallBack call from the server, we queue a work item (vnode->cb_work) to go and clobber all the PTEs mapping to that inode. This causes the CPU to trip through the ->map_pages() and ->page_mkwrite() handlers if userspace attempts to access the page(s) again. (Ideally, this would be done in the service handler for CB.CallBack, but the server is waiting for our reply before considering, and we have a list of vnodes, all of which need breaking - and the process of getting the mmap_lock and stripping the PTEs on all CPUs could be quite slow.) (2) Call afs_validate() from the ->map_pages() handler to check to see if the file has changed and to get a new callback promise from the server. Also handle the fileserver telling us that it's dropping all callbacks, possibly after it's been restarted by sending us a CB.InitCallBackState* call by the following means: (3) Maintain a per-cell list of afs files that are currently mmap'd (cell->fs_open_mmaps). (4) Add a work item to each server that is invoked if there are any open mmaps when CB.InitCallBackState happens. This work item goes through the aforementioned list and invokes the vnode->cb_work work item for each one that is currently using this server. This causes the PTEs to be cleared, causing ->map_pages() or ->page_mkwrite() to be called again, thereby calling afs_validate() again. I've chosen to simply strip the PTEs at the point of notification reception rather than invalidate all the pages as well because (a) it's faster, (b) we may get a notification for other reasons than the data being altered (in which case we don't want to clobber the pagecache) and (c) we need to ask the server to find out - and I don't want to wait for the reply before holding up userspace. This was tested using the attached test program: #include <stdbool.h> #include <stdio.h> #include <stdlib.h> #include <unistd.h> #include <fcntl.h> #include <sys/mman.h> int main(int argc, char *argv[]) { size_t size = getpagesize(); unsigned char *p; bool mod = (argc == 3); int fd; if (argc != 2 && argc != 3) { fprintf(stderr, "Format: %s <file> [mod]\n", argv[0]); exit(2); } fd = open(argv[1], mod ? O_RDWR : O_RDONLY); if (fd < 0) { perror(argv[1]); exit(1); } p = mmap(NULL, size, mod ? PROT_READ|PROT_WRITE : PROT_READ, MAP_SHARED, fd, 0); if (p == MAP_FAILED) { perror("mmap"); exit(1); } for (;;) { if (mod) { p[0]++; msync(p, size, MS_ASYNC); fsync(fd); } printf("%02x", p[0]); fflush(stdout); sleep(1); } } It runs in two modes: in one mode, it mmaps a file, then sits in a loop reading the first byte, printing it and sleeping for a second; in the second mode it mmaps a file, then sits in a loop incrementing the first byte and flushing, then printing and sleeping. Two instances of this program can be run on different machines, one doing the reading and one doing the writing. The reader should see the changes made by the writer, but without this patch, they aren't because validity checking is being done lazily - only on entry to the filesystem. Testing the InitCallBackState change is more complicated. The server has to be taken offline, the saved callback state file removed and then the server restarted whilst the reading-mode program continues to run. The client machine then has to poke the server to trigger the InitCallBackState call. Signed-off-by: David Howells <dhowells@redhat.com> Tested-by: Markus Suvanto <markus.suvanto@gmail.com> cc: linux-afs@lists.infradead.org Link: https://lore.kernel.org/r/163111668833.283156.382633263709075739.stgit@warthog.procyon.org.uk/ diff 6e0e99d5 Thu Sep 02 09:43:10 MDT 2021 David Howells <dhowells@redhat.com> afs: Fix mmap coherency vs 3rd-party changes Fix the coherency management of mmap'd data such that 3rd-party changes become visible as soon as possible after the callback notification is delivered by the fileserver. This is done by the following means: (1) When we break a callback on a vnode specified by the CB.CallBack call from the server, we queue a work item (vnode->cb_work) to go and clobber all the PTEs mapping to that inode. This causes the CPU to trip through the ->map_pages() and ->page_mkwrite() handlers if userspace attempts to access the page(s) again. (Ideally, this would be done in the service handler for CB.CallBack, but the server is waiting for our reply before considering, and we have a list of vnodes, all of which need breaking - and the process of getting the mmap_lock and stripping the PTEs on all CPUs could be quite slow.) (2) Call afs_validate() from the ->map_pages() handler to check to see if the file has changed and to get a new callback promise from the server. Also handle the fileserver telling us that it's dropping all callbacks, possibly after it's been restarted by sending us a CB.InitCallBackState* call by the following means: (3) Maintain a per-cell list of afs files that are currently mmap'd (cell->fs_open_mmaps). (4) Add a work item to each server that is invoked if there are any open mmaps when CB.InitCallBackState happens. This work item goes through the aforementioned list and invokes the vnode->cb_work work item for each one that is currently using this server. This causes the PTEs to be cleared, causing ->map_pages() or ->page_mkwrite() to be called again, thereby calling afs_validate() again. I've chosen to simply strip the PTEs at the point of notification reception rather than invalidate all the pages as well because (a) it's faster, (b) we may get a notification for other reasons than the data being altered (in which case we don't want to clobber the pagecache) and (c) we need to ask the server to find out - and I don't want to wait for the reply before holding up userspace. This was tested using the attached test program: #include <stdbool.h> #include <stdio.h> #include <stdlib.h> #include <unistd.h> #include <fcntl.h> #include <sys/mman.h> int main(int argc, char *argv[]) { size_t size = getpagesize(); unsigned char *p; bool mod = (argc == 3); int fd; if (argc != 2 && argc != 3) { fprintf(stderr, "Format: %s <file> [mod]\n", argv[0]); exit(2); } fd = open(argv[1], mod ? O_RDWR : O_RDONLY); if (fd < 0) { perror(argv[1]); exit(1); } p = mmap(NULL, size, mod ? PROT_READ|PROT_WRITE : PROT_READ, MAP_SHARED, fd, 0); if (p == MAP_FAILED) { perror("mmap"); exit(1); } for (;;) { if (mod) { p[0]++; msync(p, size, MS_ASYNC); fsync(fd); } printf("%02x", p[0]); fflush(stdout); sleep(1); } } It runs in two modes: in one mode, it mmaps a file, then sits in a loop reading the first byte, printing it and sleeping for a second; in the second mode it mmaps a file, then sits in a loop incrementing the first byte and flushing, then printing and sleeping. Two instances of this program can be run on different machines, one doing the reading and one doing the writing. The reader should see the changes made by the writer, but without this patch, they aren't because validity checking is being done lazily - only on entry to the filesystem. Testing the InitCallBackState change is more complicated. The server has to be taken offline, the saved callback state file removed and then the server restarted whilst the reading-mode program continues to run. The client machine then has to poke the server to trigger the InitCallBackState call. Signed-off-by: David Howells <dhowells@redhat.com> Tested-by: Markus Suvanto <markus.suvanto@gmail.com> cc: linux-afs@lists.infradead.org Link: https://lore.kernel.org/r/163111668833.283156.382633263709075739.stgit@warthog.procyon.org.uk/ diff 6e0e99d5 Thu Sep 02 09:43:10 MDT 2021 David Howells <dhowells@redhat.com> afs: Fix mmap coherency vs 3rd-party changes Fix the coherency management of mmap'd data such that 3rd-party changes become visible as soon as possible after the callback notification is delivered by the fileserver. This is done by the following means: (1) When we break a callback on a vnode specified by the CB.CallBack call from the server, we queue a work item (vnode->cb_work) to go and clobber all the PTEs mapping to that inode. This causes the CPU to trip through the ->map_pages() and ->page_mkwrite() handlers if userspace attempts to access the page(s) again. (Ideally, this would be done in the service handler for CB.CallBack, but the server is waiting for our reply before considering, and we have a list of vnodes, all of which need breaking - and the process of getting the mmap_lock and stripping the PTEs on all CPUs could be quite slow.) (2) Call afs_validate() from the ->map_pages() handler to check to see if the file has changed and to get a new callback promise from the server. Also handle the fileserver telling us that it's dropping all callbacks, possibly after it's been restarted by sending us a CB.InitCallBackState* call by the following means: (3) Maintain a per-cell list of afs files that are currently mmap'd (cell->fs_open_mmaps). (4) Add a work item to each server that is invoked if there are any open mmaps when CB.InitCallBackState happens. This work item goes through the aforementioned list and invokes the vnode->cb_work work item for each one that is currently using this server. This causes the PTEs to be cleared, causing ->map_pages() or ->page_mkwrite() to be called again, thereby calling afs_validate() again. I've chosen to simply strip the PTEs at the point of notification reception rather than invalidate all the pages as well because (a) it's faster, (b) we may get a notification for other reasons than the data being altered (in which case we don't want to clobber the pagecache) and (c) we need to ask the server to find out - and I don't want to wait for the reply before holding up userspace. This was tested using the attached test program: #include <stdbool.h> #include <stdio.h> #include <stdlib.h> #include <unistd.h> #include <fcntl.h> #include <sys/mman.h> int main(int argc, char *argv[]) { size_t size = getpagesize(); unsigned char *p; bool mod = (argc == 3); int fd; if (argc != 2 && argc != 3) { fprintf(stderr, "Format: %s <file> [mod]\n", argv[0]); exit(2); } fd = open(argv[1], mod ? O_RDWR : O_RDONLY); if (fd < 0) { perror(argv[1]); exit(1); } p = mmap(NULL, size, mod ? PROT_READ|PROT_WRITE : PROT_READ, MAP_SHARED, fd, 0); if (p == MAP_FAILED) { perror("mmap"); exit(1); } for (;;) { if (mod) { p[0]++; msync(p, size, MS_ASYNC); fsync(fd); } printf("%02x", p[0]); fflush(stdout); sleep(1); } } It runs in two modes: in one mode, it mmaps a file, then sits in a loop reading the first byte, printing it and sleeping for a second; in the second mode it mmaps a file, then sits in a loop incrementing the first byte and flushing, then printing and sleeping. Two instances of this program can be run on different machines, one doing the reading and one doing the writing. The reader should see the changes made by the writer, but without this patch, they aren't because validity checking is being done lazily - only on entry to the filesystem. Testing the InitCallBackState change is more complicated. The server has to be taken offline, the saved callback state file removed and then the server restarted whilst the reading-mode program continues to run. The client machine then has to poke the server to trigger the InitCallBackState call. Signed-off-by: David Howells <dhowells@redhat.com> Tested-by: Markus Suvanto <markus.suvanto@gmail.com> cc: linux-afs@lists.infradead.org Link: https://lore.kernel.org/r/163111668833.283156.382633263709075739.stgit@warthog.procyon.org.uk/ diff 5481fc6e Fri Jun 19 16:39:36 MDT 2020 David Howells <dhowells@redhat.com> afs: Fix hang on rmmod due to outstanding timer The fileserver probe timer, net->fs_probe_timer, isn't cancelled when the kafs module is being removed and so the count it holds on net->servers_outstanding doesn't get dropped.. This causes rmmod to wait forever. The hung process shows a stack like: afs_purge_servers+0x1b5/0x23c [kafs] afs_net_exit+0x44/0x6e [kafs] ops_exit_list+0x72/0x93 unregister_pernet_operations+0x14c/0x1ba unregister_pernet_subsys+0x1d/0x2a afs_exit+0x29/0x6f [kafs] __do_sys_delete_module.isra.0+0x1a2/0x24b do_syscall_64+0x51/0x95 entry_SYSCALL_64_after_hwframe+0x44/0xa9 Fix this by: (1) Attempting to cancel the probe timer and, if successful, drop the count that the timer was holding. (2) Make the timer function just drop the count and not schedule the prober if the afs portion of net namespace is being destroyed. Also, whilst we're at it, make the following changes: (3) Initialise net->servers_outstanding to 1 and decrement it before waiting on it so that it doesn't generate wake up events by being decremented to 0 until we're cleaning up. (4) Switch the atomic_dec() on ->servers_outstanding for ->fs_timer in afs_purge_servers() to use the helper function for that. Fixes: f6cbb368bcb0 ("afs: Actively poll fileservers to maintain NAT or firewall openings") Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> diff 5481fc6e Fri Jun 19 16:39:36 MDT 2020 David Howells <dhowells@redhat.com> afs: Fix hang on rmmod due to outstanding timer The fileserver probe timer, net->fs_probe_timer, isn't cancelled when the kafs module is being removed and so the count it holds on net->servers_outstanding doesn't get dropped.. This causes rmmod to wait forever. The hung process shows a stack like: afs_purge_servers+0x1b5/0x23c [kafs] afs_net_exit+0x44/0x6e [kafs] ops_exit_list+0x72/0x93 unregister_pernet_operations+0x14c/0x1ba unregister_pernet_subsys+0x1d/0x2a afs_exit+0x29/0x6f [kafs] __do_sys_delete_module.isra.0+0x1a2/0x24b do_syscall_64+0x51/0x95 entry_SYSCALL_64_after_hwframe+0x44/0xa9 Fix this by: (1) Attempting to cancel the probe timer and, if successful, drop the count that the timer was holding. (2) Make the timer function just drop the count and not schedule the prober if the afs portion of net namespace is being destroyed. Also, whilst we're at it, make the following changes: (3) Initialise net->servers_outstanding to 1 and decrement it before waiting on it so that it doesn't generate wake up events by being decremented to 0 until we're cleaning up. (4) Switch the atomic_dec() on ->servers_outstanding for ->fs_timer in afs_purge_servers() to use the helper function for that. Fixes: f6cbb368bcb0 ("afs: Actively poll fileservers to maintain NAT or firewall openings") Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> diff 5481fc6e Fri Jun 19 16:39:36 MDT 2020 David Howells <dhowells@redhat.com> afs: Fix hang on rmmod due to outstanding timer The fileserver probe timer, net->fs_probe_timer, isn't cancelled when the kafs module is being removed and so the count it holds on net->servers_outstanding doesn't get dropped.. This causes rmmod to wait forever. The hung process shows a stack like: afs_purge_servers+0x1b5/0x23c [kafs] afs_net_exit+0x44/0x6e [kafs] ops_exit_list+0x72/0x93 unregister_pernet_operations+0x14c/0x1ba unregister_pernet_subsys+0x1d/0x2a afs_exit+0x29/0x6f [kafs] __do_sys_delete_module.isra.0+0x1a2/0x24b do_syscall_64+0x51/0x95 entry_SYSCALL_64_after_hwframe+0x44/0xa9 Fix this by: (1) Attempting to cancel the probe timer and, if successful, drop the count that the timer was holding. (2) Make the timer function just drop the count and not schedule the prober if the afs portion of net namespace is being destroyed. Also, whilst we're at it, make the following changes: (3) Initialise net->servers_outstanding to 1 and decrement it before waiting on it so that it doesn't generate wake up events by being decremented to 0 until we're cleaning up. (4) Switch the atomic_dec() on ->servers_outstanding for ->fs_timer in afs_purge_servers() to use the helper function for that. Fixes: f6cbb368bcb0 ("afs: Actively poll fileservers to maintain NAT or firewall openings") Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> diff 5481fc6e Fri Jun 19 16:39:36 MDT 2020 David Howells <dhowells@redhat.com> afs: Fix hang on rmmod due to outstanding timer The fileserver probe timer, net->fs_probe_timer, isn't cancelled when the kafs module is being removed and so the count it holds on net->servers_outstanding doesn't get dropped.. This causes rmmod to wait forever. The hung process shows a stack like: afs_purge_servers+0x1b5/0x23c [kafs] afs_net_exit+0x44/0x6e [kafs] ops_exit_list+0x72/0x93 unregister_pernet_operations+0x14c/0x1ba unregister_pernet_subsys+0x1d/0x2a afs_exit+0x29/0x6f [kafs] __do_sys_delete_module.isra.0+0x1a2/0x24b do_syscall_64+0x51/0x95 entry_SYSCALL_64_after_hwframe+0x44/0xa9 Fix this by: (1) Attempting to cancel the probe timer and, if successful, drop the count that the timer was holding. (2) Make the timer function just drop the count and not schedule the prober if the afs portion of net namespace is being destroyed. Also, whilst we're at it, make the following changes: (3) Initialise net->servers_outstanding to 1 and decrement it before waiting on it so that it doesn't generate wake up events by being decremented to 0 until we're cleaning up. (4) Switch the atomic_dec() on ->servers_outstanding for ->fs_timer in afs_purge_servers() to use the helper function for that. Fixes: f6cbb368bcb0 ("afs: Actively poll fileservers to maintain NAT or firewall openings") Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> diff 5481fc6e Fri Jun 19 16:39:36 MDT 2020 David Howells <dhowells@redhat.com> afs: Fix hang on rmmod due to outstanding timer The fileserver probe timer, net->fs_probe_timer, isn't cancelled when the kafs module is being removed and so the count it holds on net->servers_outstanding doesn't get dropped.. This causes rmmod to wait forever. The hung process shows a stack like: afs_purge_servers+0x1b5/0x23c [kafs] afs_net_exit+0x44/0x6e [kafs] ops_exit_list+0x72/0x93 unregister_pernet_operations+0x14c/0x1ba unregister_pernet_subsys+0x1d/0x2a afs_exit+0x29/0x6f [kafs] __do_sys_delete_module.isra.0+0x1a2/0x24b do_syscall_64+0x51/0x95 entry_SYSCALL_64_after_hwframe+0x44/0xa9 Fix this by: (1) Attempting to cancel the probe timer and, if successful, drop the count that the timer was holding. (2) Make the timer function just drop the count and not schedule the prober if the afs portion of net namespace is being destroyed. Also, whilst we're at it, make the following changes: (3) Initialise net->servers_outstanding to 1 and decrement it before waiting on it so that it doesn't generate wake up events by being decremented to 0 until we're cleaning up. (4) Switch the atomic_dec() on ->servers_outstanding for ->fs_timer in afs_purge_servers() to use the helper function for that. Fixes: f6cbb368bcb0 ("afs: Actively poll fileservers to maintain NAT or firewall openings") Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> diff 5481fc6e Fri Jun 19 16:39:36 MDT 2020 David Howells <dhowells@redhat.com> afs: Fix hang on rmmod due to outstanding timer The fileserver probe timer, net->fs_probe_timer, isn't cancelled when the kafs module is being removed and so the count it holds on net->servers_outstanding doesn't get dropped.. This causes rmmod to wait forever. The hung process shows a stack like: afs_purge_servers+0x1b5/0x23c [kafs] afs_net_exit+0x44/0x6e [kafs] ops_exit_list+0x72/0x93 unregister_pernet_operations+0x14c/0x1ba unregister_pernet_subsys+0x1d/0x2a afs_exit+0x29/0x6f [kafs] __do_sys_delete_module.isra.0+0x1a2/0x24b do_syscall_64+0x51/0x95 entry_SYSCALL_64_after_hwframe+0x44/0xa9 Fix this by: (1) Attempting to cancel the probe timer and, if successful, drop the count that the timer was holding. (2) Make the timer function just drop the count and not schedule the prober if the afs portion of net namespace is being destroyed. Also, whilst we're at it, make the following changes: (3) Initialise net->servers_outstanding to 1 and decrement it before waiting on it so that it doesn't generate wake up events by being decremented to 0 until we're cleaning up. (4) Switch the atomic_dec() on ->servers_outstanding for ->fs_timer in afs_purge_servers() to use the helper function for that. Fixes: f6cbb368bcb0 ("afs: Actively poll fileservers to maintain NAT or firewall openings") Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> diff 5481fc6e Fri Jun 19 16:39:36 MDT 2020 David Howells <dhowells@redhat.com> afs: Fix hang on rmmod due to outstanding timer The fileserver probe timer, net->fs_probe_timer, isn't cancelled when the kafs module is being removed and so the count it holds on net->servers_outstanding doesn't get dropped.. This causes rmmod to wait forever. The hung process shows a stack like: afs_purge_servers+0x1b5/0x23c [kafs] afs_net_exit+0x44/0x6e [kafs] ops_exit_list+0x72/0x93 unregister_pernet_operations+0x14c/0x1ba unregister_pernet_subsys+0x1d/0x2a afs_exit+0x29/0x6f [kafs] __do_sys_delete_module.isra.0+0x1a2/0x24b do_syscall_64+0x51/0x95 entry_SYSCALL_64_after_hwframe+0x44/0xa9 Fix this by: (1) Attempting to cancel the probe timer and, if successful, drop the count that the timer was holding. (2) Make the timer function just drop the count and not schedule the prober if the afs portion of net namespace is being destroyed. Also, whilst we're at it, make the following changes: (3) Initialise net->servers_outstanding to 1 and decrement it before waiting on it so that it doesn't generate wake up events by being decremented to 0 until we're cleaning up. (4) Switch the atomic_dec() on ->servers_outstanding for ->fs_timer in afs_purge_servers() to use the helper function for that. Fixes: f6cbb368bcb0 ("afs: Actively poll fileservers to maintain NAT or firewall openings") Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> diff 5481fc6e Fri Jun 19 16:39:36 MDT 2020 David Howells <dhowells@redhat.com> afs: Fix hang on rmmod due to outstanding timer The fileserver probe timer, net->fs_probe_timer, isn't cancelled when the kafs module is being removed and so the count it holds on net->servers_outstanding doesn't get dropped.. This causes rmmod to wait forever. The hung process shows a stack like: afs_purge_servers+0x1b5/0x23c [kafs] afs_net_exit+0x44/0x6e [kafs] ops_exit_list+0x72/0x93 unregister_pernet_operations+0x14c/0x1ba unregister_pernet_subsys+0x1d/0x2a afs_exit+0x29/0x6f [kafs] __do_sys_delete_module.isra.0+0x1a2/0x24b do_syscall_64+0x51/0x95 entry_SYSCALL_64_after_hwframe+0x44/0xa9 Fix this by: (1) Attempting to cancel the probe timer and, if successful, drop the count that the timer was holding. (2) Make the timer function just drop the count and not schedule the prober if the afs portion of net namespace is being destroyed. Also, whilst we're at it, make the following changes: (3) Initialise net->servers_outstanding to 1 and decrement it before waiting on it so that it doesn't generate wake up events by being decremented to 0 until we're cleaning up. (4) Switch the atomic_dec() on ->servers_outstanding for ->fs_timer in afs_purge_servers() to use the helper function for that. Fixes: f6cbb368bcb0 ("afs: Actively poll fileservers to maintain NAT or firewall openings") Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> diff 5481fc6e Fri Jun 19 16:39:36 MDT 2020 David Howells <dhowells@redhat.com> afs: Fix hang on rmmod due to outstanding timer The fileserver probe timer, net->fs_probe_timer, isn't cancelled when the kafs module is being removed and so the count it holds on net->servers_outstanding doesn't get dropped.. This causes rmmod to wait forever. The hung process shows a stack like: afs_purge_servers+0x1b5/0x23c [kafs] afs_net_exit+0x44/0x6e [kafs] ops_exit_list+0x72/0x93 unregister_pernet_operations+0x14c/0x1ba unregister_pernet_subsys+0x1d/0x2a afs_exit+0x29/0x6f [kafs] __do_sys_delete_module.isra.0+0x1a2/0x24b do_syscall_64+0x51/0x95 entry_SYSCALL_64_after_hwframe+0x44/0xa9 Fix this by: (1) Attempting to cancel the probe timer and, if successful, drop the count that the timer was holding. (2) Make the timer function just drop the count and not schedule the prober if the afs portion of net namespace is being destroyed. Also, whilst we're at it, make the following changes: (3) Initialise net->servers_outstanding to 1 and decrement it before waiting on it so that it doesn't generate wake up events by being decremented to 0 until we're cleaning up. (4) Switch the atomic_dec() on ->servers_outstanding for ->fs_timer in afs_purge_servers() to use the helper function for that. Fixes: f6cbb368bcb0 ("afs: Actively poll fileservers to maintain NAT or firewall openings") Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> diff 5481fc6e Fri Jun 19 16:39:36 MDT 2020 David Howells <dhowells@redhat.com> afs: Fix hang on rmmod due to outstanding timer The fileserver probe timer, net->fs_probe_timer, isn't cancelled when the kafs module is being removed and so the count it holds on net->servers_outstanding doesn't get dropped.. This causes rmmod to wait forever. The hung process shows a stack like: afs_purge_servers+0x1b5/0x23c [kafs] afs_net_exit+0x44/0x6e [kafs] ops_exit_list+0x72/0x93 unregister_pernet_operations+0x14c/0x1ba unregister_pernet_subsys+0x1d/0x2a afs_exit+0x29/0x6f [kafs] __do_sys_delete_module.isra.0+0x1a2/0x24b do_syscall_64+0x51/0x95 entry_SYSCALL_64_after_hwframe+0x44/0xa9 Fix this by: (1) Attempting to cancel the probe timer and, if successful, drop the count that the timer was holding. (2) Make the timer function just drop the count and not schedule the prober if the afs portion of net namespace is being destroyed. Also, whilst we're at it, make the following changes: (3) Initialise net->servers_outstanding to 1 and decrement it before waiting on it so that it doesn't generate wake up events by being decremented to 0 until we're cleaning up. (4) Switch the atomic_dec() on ->servers_outstanding for ->fs_timer in afs_purge_servers() to use the helper function for that. Fixes: f6cbb368bcb0 ("afs: Actively poll fileservers to maintain NAT or firewall openings") Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> diff 5481fc6e Fri Jun 19 16:39:36 MDT 2020 David Howells <dhowells@redhat.com> afs: Fix hang on rmmod due to outstanding timer The fileserver probe timer, net->fs_probe_timer, isn't cancelled when the kafs module is being removed and so the count it holds on net->servers_outstanding doesn't get dropped.. This causes rmmod to wait forever. The hung process shows a stack like: afs_purge_servers+0x1b5/0x23c [kafs] afs_net_exit+0x44/0x6e [kafs] ops_exit_list+0x72/0x93 unregister_pernet_operations+0x14c/0x1ba unregister_pernet_subsys+0x1d/0x2a afs_exit+0x29/0x6f [kafs] __do_sys_delete_module.isra.0+0x1a2/0x24b do_syscall_64+0x51/0x95 entry_SYSCALL_64_after_hwframe+0x44/0xa9 Fix this by: (1) Attempting to cancel the probe timer and, if successful, drop the count that the timer was holding. (2) Make the timer function just drop the count and not schedule the prober if the afs portion of net namespace is being destroyed. Also, whilst we're at it, make the following changes: (3) Initialise net->servers_outstanding to 1 and decrement it before waiting on it so that it doesn't generate wake up events by being decremented to 0 until we're cleaning up. (4) Switch the atomic_dec() on ->servers_outstanding for ->fs_timer in afs_purge_servers() to use the helper function for that. Fixes: f6cbb368bcb0 ("afs: Actively poll fileservers to maintain NAT or firewall openings") Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> diff 5481fc6e Fri Jun 19 16:39:36 MDT 2020 David Howells <dhowells@redhat.com> afs: Fix hang on rmmod due to outstanding timer The fileserver probe timer, net->fs_probe_timer, isn't cancelled when the kafs module is being removed and so the count it holds on net->servers_outstanding doesn't get dropped.. This causes rmmod to wait forever. The hung process shows a stack like: afs_purge_servers+0x1b5/0x23c [kafs] afs_net_exit+0x44/0x6e [kafs] ops_exit_list+0x72/0x93 unregister_pernet_operations+0x14c/0x1ba unregister_pernet_subsys+0x1d/0x2a afs_exit+0x29/0x6f [kafs] __do_sys_delete_module.isra.0+0x1a2/0x24b do_syscall_64+0x51/0x95 entry_SYSCALL_64_after_hwframe+0x44/0xa9 Fix this by: (1) Attempting to cancel the probe timer and, if successful, drop the count that the timer was holding. (2) Make the timer function just drop the count and not schedule the prober if the afs portion of net namespace is being destroyed. Also, whilst we're at it, make the following changes: (3) Initialise net->servers_outstanding to 1 and decrement it before waiting on it so that it doesn't generate wake up events by being decremented to 0 until we're cleaning up. (4) Switch the atomic_dec() on ->servers_outstanding for ->fs_timer in afs_purge_servers() to use the helper function for that. Fixes: f6cbb368bcb0 ("afs: Actively poll fileservers to maintain NAT or firewall openings") Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> diff 5481fc6e Fri Jun 19 16:39:36 MDT 2020 David Howells <dhowells@redhat.com> afs: Fix hang on rmmod due to outstanding timer The fileserver probe timer, net->fs_probe_timer, isn't cancelled when the kafs module is being removed and so the count it holds on net->servers_outstanding doesn't get dropped.. This causes rmmod to wait forever. The hung process shows a stack like: afs_purge_servers+0x1b5/0x23c [kafs] afs_net_exit+0x44/0x6e [kafs] ops_exit_list+0x72/0x93 unregister_pernet_operations+0x14c/0x1ba unregister_pernet_subsys+0x1d/0x2a afs_exit+0x29/0x6f [kafs] __do_sys_delete_module.isra.0+0x1a2/0x24b do_syscall_64+0x51/0x95 entry_SYSCALL_64_after_hwframe+0x44/0xa9 Fix this by: (1) Attempting to cancel the probe timer and, if successful, drop the count that the timer was holding. (2) Make the timer function just drop the count and not schedule the prober if the afs portion of net namespace is being destroyed. Also, whilst we're at it, make the following changes: (3) Initialise net->servers_outstanding to 1 and decrement it before waiting on it so that it doesn't generate wake up events by being decremented to 0 until we're cleaning up. (4) Switch the atomic_dec() on ->servers_outstanding for ->fs_timer in afs_purge_servers() to use the helper function for that. Fixes: f6cbb368bcb0 ("afs: Actively poll fileservers to maintain NAT or firewall openings") Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> diff 5481fc6e Fri Jun 19 16:39:36 MDT 2020 David Howells <dhowells@redhat.com> afs: Fix hang on rmmod due to outstanding timer The fileserver probe timer, net->fs_probe_timer, isn't cancelled when the kafs module is being removed and so the count it holds on net->servers_outstanding doesn't get dropped.. This causes rmmod to wait forever. The hung process shows a stack like: afs_purge_servers+0x1b5/0x23c [kafs] afs_net_exit+0x44/0x6e [kafs] ops_exit_list+0x72/0x93 unregister_pernet_operations+0x14c/0x1ba unregister_pernet_subsys+0x1d/0x2a afs_exit+0x29/0x6f [kafs] __do_sys_delete_module.isra.0+0x1a2/0x24b do_syscall_64+0x51/0x95 entry_SYSCALL_64_after_hwframe+0x44/0xa9 Fix this by: (1) Attempting to cancel the probe timer and, if successful, drop the count that the timer was holding. (2) Make the timer function just drop the count and not schedule the prober if the afs portion of net namespace is being destroyed. Also, whilst we're at it, make the following changes: (3) Initialise net->servers_outstanding to 1 and decrement it before waiting on it so that it doesn't generate wake up events by being decremented to 0 until we're cleaning up. (4) Switch the atomic_dec() on ->servers_outstanding for ->fs_timer in afs_purge_servers() to use the helper function for that. Fixes: f6cbb368bcb0 ("afs: Actively poll fileservers to maintain NAT or firewall openings") Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> diff 5481fc6e Fri Jun 19 16:39:36 MDT 2020 David Howells <dhowells@redhat.com> afs: Fix hang on rmmod due to outstanding timer The fileserver probe timer, net->fs_probe_timer, isn't cancelled when the kafs module is being removed and so the count it holds on net->servers_outstanding doesn't get dropped.. This causes rmmod to wait forever. The hung process shows a stack like: afs_purge_servers+0x1b5/0x23c [kafs] afs_net_exit+0x44/0x6e [kafs] ops_exit_list+0x72/0x93 unregister_pernet_operations+0x14c/0x1ba unregister_pernet_subsys+0x1d/0x2a afs_exit+0x29/0x6f [kafs] __do_sys_delete_module.isra.0+0x1a2/0x24b do_syscall_64+0x51/0x95 entry_SYSCALL_64_after_hwframe+0x44/0xa9 Fix this by: (1) Attempting to cancel the probe timer and, if successful, drop the count that the timer was holding. (2) Make the timer function just drop the count and not schedule the prober if the afs portion of net namespace is being destroyed. Also, whilst we're at it, make the following changes: (3) Initialise net->servers_outstanding to 1 and decrement it before waiting on it so that it doesn't generate wake up events by being decremented to 0 until we're cleaning up. (4) Switch the atomic_dec() on ->servers_outstanding for ->fs_timer in afs_purge_servers() to use the helper function for that. Fixes: f6cbb368bcb0 ("afs: Actively poll fileservers to maintain NAT or firewall openings") Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> diff 5481fc6e Fri Jun 19 16:39:36 MDT 2020 David Howells <dhowells@redhat.com> afs: Fix hang on rmmod due to outstanding timer The fileserver probe timer, net->fs_probe_timer, isn't cancelled when the kafs module is being removed and so the count it holds on net->servers_outstanding doesn't get dropped.. This causes rmmod to wait forever. The hung process shows a stack like: afs_purge_servers+0x1b5/0x23c [kafs] afs_net_exit+0x44/0x6e [kafs] ops_exit_list+0x72/0x93 unregister_pernet_operations+0x14c/0x1ba unregister_pernet_subsys+0x1d/0x2a afs_exit+0x29/0x6f [kafs] __do_sys_delete_module.isra.0+0x1a2/0x24b do_syscall_64+0x51/0x95 entry_SYSCALL_64_after_hwframe+0x44/0xa9 Fix this by: (1) Attempting to cancel the probe timer and, if successful, drop the count that the timer was holding. (2) Make the timer function just drop the count and not schedule the prober if the afs portion of net namespace is being destroyed. Also, whilst we're at it, make the following changes: (3) Initialise net->servers_outstanding to 1 and decrement it before waiting on it so that it doesn't generate wake up events by being decremented to 0 until we're cleaning up. (4) Switch the atomic_dec() on ->servers_outstanding for ->fs_timer in afs_purge_servers() to use the helper function for that. Fixes: f6cbb368bcb0 ("afs: Actively poll fileservers to maintain NAT or firewall openings") Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> diff 5481fc6e Fri Jun 19 16:39:36 MDT 2020 David Howells <dhowells@redhat.com> afs: Fix hang on rmmod due to outstanding timer The fileserver probe timer, net->fs_probe_timer, isn't cancelled when the kafs module is being removed and so the count it holds on net->servers_outstanding doesn't get dropped.. This causes rmmod to wait forever. The hung process shows a stack like: afs_purge_servers+0x1b5/0x23c [kafs] afs_net_exit+0x44/0x6e [kafs] ops_exit_list+0x72/0x93 unregister_pernet_operations+0x14c/0x1ba unregister_pernet_subsys+0x1d/0x2a afs_exit+0x29/0x6f [kafs] __do_sys_delete_module.isra.0+0x1a2/0x24b do_syscall_64+0x51/0x95 entry_SYSCALL_64_after_hwframe+0x44/0xa9 Fix this by: (1) Attempting to cancel the probe timer and, if successful, drop the count that the timer was holding. (2) Make the timer function just drop the count and not schedule the prober if the afs portion of net namespace is being destroyed. Also, whilst we're at it, make the following changes: (3) Initialise net->servers_outstanding to 1 and decrement it before waiting on it so that it doesn't generate wake up events by being decremented to 0 until we're cleaning up. (4) Switch the atomic_dec() on ->servers_outstanding for ->fs_timer in afs_purge_servers() to use the helper function for that. Fixes: f6cbb368bcb0 ("afs: Actively poll fileservers to maintain NAT or firewall openings") Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> diff 5481fc6e Fri Jun 19 16:39:36 MDT 2020 David Howells <dhowells@redhat.com> afs: Fix hang on rmmod due to outstanding timer The fileserver probe timer, net->fs_probe_timer, isn't cancelled when the kafs module is being removed and so the count it holds on net->servers_outstanding doesn't get dropped.. This causes rmmod to wait forever. The hung process shows a stack like: afs_purge_servers+0x1b5/0x23c [kafs] afs_net_exit+0x44/0x6e [kafs] ops_exit_list+0x72/0x93 unregister_pernet_operations+0x14c/0x1ba unregister_pernet_subsys+0x1d/0x2a afs_exit+0x29/0x6f [kafs] __do_sys_delete_module.isra.0+0x1a2/0x24b do_syscall_64+0x51/0x95 entry_SYSCALL_64_after_hwframe+0x44/0xa9 Fix this by: (1) Attempting to cancel the probe timer and, if successful, drop the count that the timer was holding. (2) Make the timer function just drop the count and not schedule the prober if the afs portion of net namespace is being destroyed. Also, whilst we're at it, make the following changes: (3) Initialise net->servers_outstanding to 1 and decrement it before waiting on it so that it doesn't generate wake up events by being decremented to 0 until we're cleaning up. (4) Switch the atomic_dec() on ->servers_outstanding for ->fs_timer in afs_purge_servers() to use the helper function for that. Fixes: f6cbb368bcb0 ("afs: Actively poll fileservers to maintain NAT or firewall openings") Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> diff 5481fc6e Fri Jun 19 16:39:36 MDT 2020 David Howells <dhowells@redhat.com> afs: Fix hang on rmmod due to outstanding timer The fileserver probe timer, net->fs_probe_timer, isn't cancelled when the kafs module is being removed and so the count it holds on net->servers_outstanding doesn't get dropped.. This causes rmmod to wait forever. The hung process shows a stack like: afs_purge_servers+0x1b5/0x23c [kafs] afs_net_exit+0x44/0x6e [kafs] ops_exit_list+0x72/0x93 unregister_pernet_operations+0x14c/0x1ba unregister_pernet_subsys+0x1d/0x2a afs_exit+0x29/0x6f [kafs] __do_sys_delete_module.isra.0+0x1a2/0x24b do_syscall_64+0x51/0x95 entry_SYSCALL_64_after_hwframe+0x44/0xa9 Fix this by: (1) Attempting to cancel the probe timer and, if successful, drop the count that the timer was holding. (2) Make the timer function just drop the count and not schedule the prober if the afs portion of net namespace is being destroyed. Also, whilst we're at it, make the following changes: (3) Initialise net->servers_outstanding to 1 and decrement it before waiting on it so that it doesn't generate wake up events by being decremented to 0 until we're cleaning up. (4) Switch the atomic_dec() on ->servers_outstanding for ->fs_timer in afs_purge_servers() to use the helper function for that. Fixes: f6cbb368bcb0 ("afs: Actively poll fileservers to maintain NAT or firewall openings") Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> diff 5481fc6e Fri Jun 19 16:39:36 MDT 2020 David Howells <dhowells@redhat.com> afs: Fix hang on rmmod due to outstanding timer The fileserver probe timer, net->fs_probe_timer, isn't cancelled when the kafs module is being removed and so the count it holds on net->servers_outstanding doesn't get dropped.. This causes rmmod to wait forever. The hung process shows a stack like: afs_purge_servers+0x1b5/0x23c [kafs] afs_net_exit+0x44/0x6e [kafs] ops_exit_list+0x72/0x93 unregister_pernet_operations+0x14c/0x1ba unregister_pernet_subsys+0x1d/0x2a afs_exit+0x29/0x6f [kafs] __do_sys_delete_module.isra.0+0x1a2/0x24b do_syscall_64+0x51/0x95 entry_SYSCALL_64_after_hwframe+0x44/0xa9 Fix this by: (1) Attempting to cancel the probe timer and, if successful, drop the count that the timer was holding. (2) Make the timer function just drop the count and not schedule the prober if the afs portion of net namespace is being destroyed. Also, whilst we're at it, make the following changes: (3) Initialise net->servers_outstanding to 1 and decrement it before waiting on it so that it doesn't generate wake up events by being decremented to 0 until we're cleaning up. (4) Switch the atomic_dec() on ->servers_outstanding for ->fs_timer in afs_purge_servers() to use the helper function for that. Fixes: f6cbb368bcb0 ("afs: Actively poll fileservers to maintain NAT or firewall openings") Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
H A D | proc.c | diff f94f70d3 Fri Oct 27 04:42:57 MDT 2023 David Howells <dhowells@redhat.com> afs: Provide a way to configure address priorities AFS servers may have multiple addresses, but the client can't easily judge between them as to which one is best. For instance, an address that has a larger RTT might actually have a better bandwidth because it goes through a switch rather than being directly connected - but we can't work this out dynamically unless we push through sufficient data that we can measure it. To allow the administrator to configure this, add a list of preference weightings for server addresses by IPv4/IPv6 address or subnet and allow this to be viewed through a procfile and altered by writing text commands to that same file. Preference rules can be added/updated by: echo "add <proto> <addr>[/<subnet>] <prior>" >/proc/fs/afs/addr_prefs echo "add udp 1.2.3.4 1000" >/proc/fs/afs/addr_prefs echo "add udp 192.168.0.0/16 3000" >/proc/fs/afs/addr_prefs echo "add udp 1001:2002:0:6::/64 4000" >/proc/fs/afs/addr_prefs and removed by: echo "del <proto> <addr>[/<subnet>]" >/proc/fs/afs/addr_prefs echo "del udp 1.2.3.4" >/proc/fs/afs/addr_prefs where the priority is a number between 0 and 65535. The list is split between IPv4 and IPv6 addresses and each sublist is kept in numerical order, with rules that would otherwise match but have different subnet masking being ordered with the most specific submatch first. A subsequent patch will apply these rules. Signed-off-by: David Howells <dhowells@redhat.com> cc: Marc Dionne <marc.dionne@auristor.com> cc: linux-afs@lists.infradead.org diff f94f70d3 Fri Oct 27 04:42:57 MDT 2023 David Howells <dhowells@redhat.com> afs: Provide a way to configure address priorities AFS servers may have multiple addresses, but the client can't easily judge between them as to which one is best. For instance, an address that has a larger RTT might actually have a better bandwidth because it goes through a switch rather than being directly connected - but we can't work this out dynamically unless we push through sufficient data that we can measure it. To allow the administrator to configure this, add a list of preference weightings for server addresses by IPv4/IPv6 address or subnet and allow this to be viewed through a procfile and altered by writing text commands to that same file. Preference rules can be added/updated by: echo "add <proto> <addr>[/<subnet>] <prior>" >/proc/fs/afs/addr_prefs echo "add udp 1.2.3.4 1000" >/proc/fs/afs/addr_prefs echo "add udp 192.168.0.0/16 3000" >/proc/fs/afs/addr_prefs echo "add udp 1001:2002:0:6::/64 4000" >/proc/fs/afs/addr_prefs and removed by: echo "del <proto> <addr>[/<subnet>]" >/proc/fs/afs/addr_prefs echo "del udp 1.2.3.4" >/proc/fs/afs/addr_prefs where the priority is a number between 0 and 65535. The list is split between IPv4 and IPv6 addresses and each sublist is kept in numerical order, with rules that would otherwise match but have different subnet masking being ordered with the most specific submatch first. A subsequent patch will apply these rules. Signed-off-by: David Howells <dhowells@redhat.com> cc: Marc Dionne <marc.dionne@auristor.com> cc: linux-afs@lists.infradead.org diff 88c853c3 Tue Jul 23 04:24:59 MDT 2019 David Howells <dhowells@redhat.com> afs: Fix cell refcounting by splitting the usage counter Management of the lifetime of afs_cell struct has some problems due to the usage counter being used to determine whether objects of that type are in use in addition to whether anyone might be interested in the structure. This is made trickier by cell objects being cached for a period of time in case they're quickly reused as they hold the result of a setup process that may be slow (DNS lookups, AFS RPC ops). Problems include the cached root volume from alias resolution pinning its parent cell record, rmmod occasionally hanging and occasionally producing assertion failures. Fix this by splitting the count of active users from the struct reference count. Things then work as follows: (1) The cell cache keeps +1 on the cell's activity count and this has to be dropped before the cell can be removed. afs_manage_cell() tries to exchange the 1 to a 0 with the cells_lock write-locked, and if successful, the record is removed from the net->cells. (2) One struct ref is 'owned' by the activity count. That is put when the active count is reduced to 0 (final_destruction label). (3) A ref can be held on a cell whilst it is queued for management on a work queue without confusing the active count. afs_queue_cell() is added to wrap this. (4) The queue's ref is dropped at the end of the management. This is split out into a separate function, afs_manage_cell_work(). (5) The root volume record is put after a cell is removed (at the final_destruction label) rather then in the RCU destruction routine. (6) Volumes hold struct refs, but aren't active users. (7) Both counts are displayed in /proc/net/afs/cells. There are some management function changes: (*) afs_put_cell() now just decrements the refcount and triggers the RCU destruction if it becomes 0. It no longer sets a timer to have the manager do this. (*) afs_use_cell() and afs_unuse_cell() are added to increase and decrease the active count. afs_unuse_cell() sets the management timer. (*) afs_queue_cell() is added to queue a cell with approprate refs. There are also some other fixes: (*) Don't let /proc/net/afs/cells access a cell's vllist if it's NULL. (*) Make sure that candidate cells in lookups are properly destroyed rather than being simply kfree'd. This ensures the bits it points to are destroyed also. (*) afs_dec_cells_outstanding() is now called in cell destruction rather than at "final_destruction". This ensures that cell->net is still valid to the end of the destructor. (*) As a consequence of the previous two changes, move the increment of net->cells_outstanding that was at the point of insertion into the tree to the allocation routine to correctly balance things. Fixes: 989782dcdc91 ("afs: Overhaul cell database management") Signed-off-by: David Howells <dhowells@redhat.com> diff 88c853c3 Tue Jul 23 04:24:59 MDT 2019 David Howells <dhowells@redhat.com> afs: Fix cell refcounting by splitting the usage counter Management of the lifetime of afs_cell struct has some problems due to the usage counter being used to determine whether objects of that type are in use in addition to whether anyone might be interested in the structure. This is made trickier by cell objects being cached for a period of time in case they're quickly reused as they hold the result of a setup process that may be slow (DNS lookups, AFS RPC ops). Problems include the cached root volume from alias resolution pinning its parent cell record, rmmod occasionally hanging and occasionally producing assertion failures. Fix this by splitting the count of active users from the struct reference count. Things then work as follows: (1) The cell cache keeps +1 on the cell's activity count and this has to be dropped before the cell can be removed. afs_manage_cell() tries to exchange the 1 to a 0 with the cells_lock write-locked, and if successful, the record is removed from the net->cells. (2) One struct ref is 'owned' by the activity count. That is put when the active count is reduced to 0 (final_destruction label). (3) A ref can be held on a cell whilst it is queued for management on a work queue without confusing the active count. afs_queue_cell() is added to wrap this. (4) The queue's ref is dropped at the end of the management. This is split out into a separate function, afs_manage_cell_work(). (5) The root volume record is put after a cell is removed (at the final_destruction label) rather then in the RCU destruction routine. (6) Volumes hold struct refs, but aren't active users. (7) Both counts are displayed in /proc/net/afs/cells. There are some management function changes: (*) afs_put_cell() now just decrements the refcount and triggers the RCU destruction if it becomes 0. It no longer sets a timer to have the manager do this. (*) afs_use_cell() and afs_unuse_cell() are added to increase and decrease the active count. afs_unuse_cell() sets the management timer. (*) afs_queue_cell() is added to queue a cell with approprate refs. There are also some other fixes: (*) Don't let /proc/net/afs/cells access a cell's vllist if it's NULL. (*) Make sure that candidate cells in lookups are properly destroyed rather than being simply kfree'd. This ensures the bits it points to are destroyed also. (*) afs_dec_cells_outstanding() is now called in cell destruction rather than at "final_destruction". This ensures that cell->net is still valid to the end of the destructor. (*) As a consequence of the previous two changes, move the increment of net->cells_outstanding that was at the point of insertion into the tree to the allocation routine to correctly balance things. Fixes: 989782dcdc91 ("afs: Overhaul cell database management") Signed-off-by: David Howells <dhowells@redhat.com> diff 88c853c3 Tue Jul 23 04:24:59 MDT 2019 David Howells <dhowells@redhat.com> afs: Fix cell refcounting by splitting the usage counter Management of the lifetime of afs_cell struct has some problems due to the usage counter being used to determine whether objects of that type are in use in addition to whether anyone might be interested in the structure. This is made trickier by cell objects being cached for a period of time in case they're quickly reused as they hold the result of a setup process that may be slow (DNS lookups, AFS RPC ops). Problems include the cached root volume from alias resolution pinning its parent cell record, rmmod occasionally hanging and occasionally producing assertion failures. Fix this by splitting the count of active users from the struct reference count. Things then work as follows: (1) The cell cache keeps +1 on the cell's activity count and this has to be dropped before the cell can be removed. afs_manage_cell() tries to exchange the 1 to a 0 with the cells_lock write-locked, and if successful, the record is removed from the net->cells. (2) One struct ref is 'owned' by the activity count. That is put when the active count is reduced to 0 (final_destruction label). (3) A ref can be held on a cell whilst it is queued for management on a work queue without confusing the active count. afs_queue_cell() is added to wrap this. (4) The queue's ref is dropped at the end of the management. This is split out into a separate function, afs_manage_cell_work(). (5) The root volume record is put after a cell is removed (at the final_destruction label) rather then in the RCU destruction routine. (6) Volumes hold struct refs, but aren't active users. (7) Both counts are displayed in /proc/net/afs/cells. There are some management function changes: (*) afs_put_cell() now just decrements the refcount and triggers the RCU destruction if it becomes 0. It no longer sets a timer to have the manager do this. (*) afs_use_cell() and afs_unuse_cell() are added to increase and decrease the active count. afs_unuse_cell() sets the management timer. (*) afs_queue_cell() is added to queue a cell with approprate refs. There are also some other fixes: (*) Don't let /proc/net/afs/cells access a cell's vllist if it's NULL. (*) Make sure that candidate cells in lookups are properly destroyed rather than being simply kfree'd. This ensures the bits it points to are destroyed also. (*) afs_dec_cells_outstanding() is now called in cell destruction rather than at "final_destruction". This ensures that cell->net is still valid to the end of the destructor. (*) As a consequence of the previous two changes, move the increment of net->cells_outstanding that was at the point of insertion into the tree to the allocation routine to correctly balance things. Fixes: 989782dcdc91 ("afs: Overhaul cell database management") Signed-off-by: David Howells <dhowells@redhat.com> diff 977e5f8e Fri Apr 17 10:31:26 MDT 2020 David Howells <dhowells@redhat.com> afs: Split the usage count on struct afs_server Split the usage count on the afs_server struct to have an active count that registers who's actually using it separately from the reference count on the object. This allows a future patch to dispatch polling probes without advancing the "unuse" time into the future each time we emit a probe, which would otherwise prevent unused server records from expiring. Included in this: (1) The latter part of afs_destroy_server() in which the RCU destruction of afs_server objects is invoked and the outstanding server count is decremented is split out into __afs_put_server(). (2) afs_put_server() now calls __afs_put_server() rather then setting the management timer. (3) The calls begun by afs_fs_give_up_all_callbacks() and afs_fs_get_capabilities() can now take a ref on the server record, so afs_destroy_server() can just drop its ref and needn't wait for the completion of these calls. They'll put the ref when they're done. (4) Because of (3), afs_fs_probe_done() no longer needs to wake up afs_destroy_server() with server->probe_outstanding. (5) afs_gc_servers can be simplified. It only needs to check if server->active is 0 rather than playing games with the refcount. (6) afs_manage_servers() can propose a server for gc if usage == 0 rather than if ref == 1. The gc is effected by (5). Signed-off-by: David Howells <dhowells@redhat.com> diff 977e5f8e Fri Apr 17 10:31:26 MDT 2020 David Howells <dhowells@redhat.com> afs: Split the usage count on struct afs_server Split the usage count on the afs_server struct to have an active count that registers who's actually using it separately from the reference count on the object. This allows a future patch to dispatch polling probes without advancing the "unuse" time into the future each time we emit a probe, which would otherwise prevent unused server records from expiring. Included in this: (1) The latter part of afs_destroy_server() in which the RCU destruction of afs_server objects is invoked and the outstanding server count is decremented is split out into __afs_put_server(). (2) afs_put_server() now calls __afs_put_server() rather then setting the management timer. (3) The calls begun by afs_fs_give_up_all_callbacks() and afs_fs_get_capabilities() can now take a ref on the server record, so afs_destroy_server() can just drop its ref and needn't wait for the completion of these calls. They'll put the ref when they're done. (4) Because of (3), afs_fs_probe_done() no longer needs to wake up afs_destroy_server() with server->probe_outstanding. (5) afs_gc_servers can be simplified. It only needs to check if server->active is 0 rather than playing games with the refcount. (6) afs_manage_servers() can propose a server for gc if usage == 0 rather than if ref == 1. The gc is effected by (5). Signed-off-by: David Howells <dhowells@redhat.com> diff 0a5143f2 Fri Oct 19 17:57:57 MDT 2018 David Howells <dhowells@redhat.com> afs: Implement VL server rotation Track VL servers as independent entities rather than lumping all their addresses together into one set and implement server-level rotation by: (1) Add the concept of a VL server list, where each server has its own separate address list. This code is similar to the FS server list. (2) Use the DNS resolver to retrieve a set of servers and their associated addresses, ports, preference and weight ratings. (3) In the case of a legacy DNS resolver or an address list given directly through /proc/net/afs/cells, create a list containing just a dummy server record and attach all the addresses to that. (4) Implement a simple rotation policy, for the moment ignoring the priorities and weights assigned to the servers. (5) Show the address list through /proc/net/afs/<cell>/vlservers. This also displays the source and status of the data as indicated by the upcall. Signed-off-by: David Howells <dhowells@redhat.com> diff 0a5143f2 Fri Oct 19 17:57:57 MDT 2018 David Howells <dhowells@redhat.com> afs: Implement VL server rotation Track VL servers as independent entities rather than lumping all their addresses together into one set and implement server-level rotation by: (1) Add the concept of a VL server list, where each server has its own separate address list. This code is similar to the FS server list. (2) Use the DNS resolver to retrieve a set of servers and their associated addresses, ports, preference and weight ratings. (3) In the case of a legacy DNS resolver or an address list given directly through /proc/net/afs/cells, create a list containing just a dummy server record and attach all the addresses to that. (4) Implement a simple rotation policy, for the moment ignoring the priorities and weights assigned to the servers. (5) Show the address list through /proc/net/afs/<cell>/vlservers. This also displays the source and status of the data as indicated by the upcall. Signed-off-by: David Howells <dhowells@redhat.com> diff 0aac4bce Sat Jun 02 15:20:31 MDT 2018 David Howells <dhowells@redhat.com> afs: Show all of a server's addresses in /proc/fs/afs/servers Show all of a server's addresses in /proc/fs/afs/servers, placing the second plus addresses on padded lines of their own. The current address is marked with a star. Signed-off-by: David Howells <dhowells@redhat.com> |
H A D | internal.h | diff f94f70d3 Fri Oct 27 04:42:57 MDT 2023 David Howells <dhowells@redhat.com> afs: Provide a way to configure address priorities AFS servers may have multiple addresses, but the client can't easily judge between them as to which one is best. For instance, an address that has a larger RTT might actually have a better bandwidth because it goes through a switch rather than being directly connected - but we can't work this out dynamically unless we push through sufficient data that we can measure it. To allow the administrator to configure this, add a list of preference weightings for server addresses by IPv4/IPv6 address or subnet and allow this to be viewed through a procfile and altered by writing text commands to that same file. Preference rules can be added/updated by: echo "add <proto> <addr>[/<subnet>] <prior>" >/proc/fs/afs/addr_prefs echo "add udp 1.2.3.4 1000" >/proc/fs/afs/addr_prefs echo "add udp 192.168.0.0/16 3000" >/proc/fs/afs/addr_prefs echo "add udp 1001:2002:0:6::/64 4000" >/proc/fs/afs/addr_prefs and removed by: echo "del <proto> <addr>[/<subnet>]" >/proc/fs/afs/addr_prefs echo "del udp 1.2.3.4" >/proc/fs/afs/addr_prefs where the priority is a number between 0 and 65535. The list is split between IPv4 and IPv6 addresses and each sublist is kept in numerical order, with rules that would otherwise match but have different subnet masking being ordered with the most specific submatch first. A subsequent patch will apply these rules. Signed-off-by: David Howells <dhowells@redhat.com> cc: Marc Dionne <marc.dionne@auristor.com> cc: linux-afs@lists.infradead.org diff f94f70d3 Fri Oct 27 04:42:57 MDT 2023 David Howells <dhowells@redhat.com> afs: Provide a way to configure address priorities AFS servers may have multiple addresses, but the client can't easily judge between them as to which one is best. For instance, an address that has a larger RTT might actually have a better bandwidth because it goes through a switch rather than being directly connected - but we can't work this out dynamically unless we push through sufficient data that we can measure it. To allow the administrator to configure this, add a list of preference weightings for server addresses by IPv4/IPv6 address or subnet and allow this to be viewed through a procfile and altered by writing text commands to that same file. Preference rules can be added/updated by: echo "add <proto> <addr>[/<subnet>] <prior>" >/proc/fs/afs/addr_prefs echo "add udp 1.2.3.4 1000" >/proc/fs/afs/addr_prefs echo "add udp 192.168.0.0/16 3000" >/proc/fs/afs/addr_prefs echo "add udp 1001:2002:0:6::/64 4000" >/proc/fs/afs/addr_prefs and removed by: echo "del <proto> <addr>[/<subnet>]" >/proc/fs/afs/addr_prefs echo "del udp 1.2.3.4" >/proc/fs/afs/addr_prefs where the priority is a number between 0 and 65535. The list is split between IPv4 and IPv6 addresses and each sublist is kept in numerical order, with rules that would otherwise match but have different subnet masking being ordered with the most specific submatch first. A subsequent patch will apply these rules. Signed-off-by: David Howells <dhowells@redhat.com> cc: Marc Dionne <marc.dionne@auristor.com> cc: linux-afs@lists.infradead.org diff 9a6b294a Thu Dec 21 06:57:31 MST 2023 David Howells <dhowells@redhat.com> afs: Fix use-after-free due to get/remove race in volume tree When an afs_volume struct is put, its refcount is reduced to 0 before the cell->volume_lock is taken and the volume removed from the cell->volumes tree. Unfortunately, this means that the lookup code can race and see a volume with a zero ref in the tree, resulting in a use-after-free: refcount_t: addition on 0; use-after-free. WARNING: CPU: 3 PID: 130782 at lib/refcount.c:25 refcount_warn_saturate+0x7a/0xda ... RIP: 0010:refcount_warn_saturate+0x7a/0xda ... Call Trace: afs_get_volume+0x3d/0x55 afs_create_volume+0x126/0x1de afs_validate_fc+0xfe/0x130 afs_get_tree+0x20/0x2e5 vfs_get_tree+0x1d/0xc9 do_new_mount+0x13b/0x22e do_mount+0x5d/0x8a __do_sys_mount+0x100/0x12a do_syscall_64+0x3a/0x94 entry_SYSCALL_64_after_hwframe+0x62/0x6a Fix this by: (1) When putting, use a flag to indicate if the volume has been removed from the tree and skip the rb_erase if it has. (2) When looking up, use a conditional ref increment and if it fails because the refcount is 0, replace the node in the tree and set the removal flag. Fixes: 20325960f875 ("afs: Reorganise volume and server trees to be rooted on the cell") Signed-off-by: David Howells <dhowells@redhat.com> Reviewed-by: Jeffrey Altman <jaltman@auristor.com> cc: Marc Dionne <marc.dionne@auristor.com> cc: linux-afs@lists.infradead.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> diff 9a6b294a Thu Dec 21 06:57:31 MST 2023 David Howells <dhowells@redhat.com> afs: Fix use-after-free due to get/remove race in volume tree When an afs_volume struct is put, its refcount is reduced to 0 before the cell->volume_lock is taken and the volume removed from the cell->volumes tree. Unfortunately, this means that the lookup code can race and see a volume with a zero ref in the tree, resulting in a use-after-free: refcount_t: addition on 0; use-after-free. WARNING: CPU: 3 PID: 130782 at lib/refcount.c:25 refcount_warn_saturate+0x7a/0xda ... RIP: 0010:refcount_warn_saturate+0x7a/0xda ... Call Trace: afs_get_volume+0x3d/0x55 afs_create_volume+0x126/0x1de afs_validate_fc+0xfe/0x130 afs_get_tree+0x20/0x2e5 vfs_get_tree+0x1d/0xc9 do_new_mount+0x13b/0x22e do_mount+0x5d/0x8a __do_sys_mount+0x100/0x12a do_syscall_64+0x3a/0x94 entry_SYSCALL_64_after_hwframe+0x62/0x6a Fix this by: (1) When putting, use a flag to indicate if the volume has been removed from the tree and skip the rb_erase if it has. (2) When looking up, use a conditional ref increment and if it fails because the refcount is 0, replace the node in the tree and set the removal flag. Fixes: 20325960f875 ("afs: Reorganise volume and server trees to be rooted on the cell") Signed-off-by: David Howells <dhowells@redhat.com> Reviewed-by: Jeffrey Altman <jaltman@auristor.com> cc: Marc Dionne <marc.dionne@auristor.com> cc: linux-afs@lists.infradead.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> diff 9a6b294a Thu Dec 21 06:57:31 MST 2023 David Howells <dhowells@redhat.com> afs: Fix use-after-free due to get/remove race in volume tree When an afs_volume struct is put, its refcount is reduced to 0 before the cell->volume_lock is taken and the volume removed from the cell->volumes tree. Unfortunately, this means that the lookup code can race and see a volume with a zero ref in the tree, resulting in a use-after-free: refcount_t: addition on 0; use-after-free. WARNING: CPU: 3 PID: 130782 at lib/refcount.c:25 refcount_warn_saturate+0x7a/0xda ... RIP: 0010:refcount_warn_saturate+0x7a/0xda ... Call Trace: afs_get_volume+0x3d/0x55 afs_create_volume+0x126/0x1de afs_validate_fc+0xfe/0x130 afs_get_tree+0x20/0x2e5 vfs_get_tree+0x1d/0xc9 do_new_mount+0x13b/0x22e do_mount+0x5d/0x8a __do_sys_mount+0x100/0x12a do_syscall_64+0x3a/0x94 entry_SYSCALL_64_after_hwframe+0x62/0x6a Fix this by: (1) When putting, use a flag to indicate if the volume has been removed from the tree and skip the rb_erase if it has. (2) When looking up, use a conditional ref increment and if it fails because the refcount is 0, replace the node in the tree and set the removal flag. Fixes: 20325960f875 ("afs: Reorganise volume and server trees to be rooted on the cell") Signed-off-by: David Howells <dhowells@redhat.com> Reviewed-by: Jeffrey Altman <jaltman@auristor.com> cc: Marc Dionne <marc.dionne@auristor.com> cc: linux-afs@lists.infradead.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> diff 9a6b294a Thu Dec 21 06:57:31 MST 2023 David Howells <dhowells@redhat.com> afs: Fix use-after-free due to get/remove race in volume tree When an afs_volume struct is put, its refcount is reduced to 0 before the cell->volume_lock is taken and the volume removed from the cell->volumes tree. Unfortunately, this means that the lookup code can race and see a volume with a zero ref in the tree, resulting in a use-after-free: refcount_t: addition on 0; use-after-free. WARNING: CPU: 3 PID: 130782 at lib/refcount.c:25 refcount_warn_saturate+0x7a/0xda ... RIP: 0010:refcount_warn_saturate+0x7a/0xda ... Call Trace: afs_get_volume+0x3d/0x55 afs_create_volume+0x126/0x1de afs_validate_fc+0xfe/0x130 afs_get_tree+0x20/0x2e5 vfs_get_tree+0x1d/0xc9 do_new_mount+0x13b/0x22e do_mount+0x5d/0x8a __do_sys_mount+0x100/0x12a do_syscall_64+0x3a/0x94 entry_SYSCALL_64_after_hwframe+0x62/0x6a Fix this by: (1) When putting, use a flag to indicate if the volume has been removed from the tree and skip the rb_erase if it has. (2) When looking up, use a conditional ref increment and if it fails because the refcount is 0, replace the node in the tree and set the removal flag. Fixes: 20325960f875 ("afs: Reorganise volume and server trees to be rooted on the cell") Signed-off-by: David Howells <dhowells@redhat.com> Reviewed-by: Jeffrey Altman <jaltman@auristor.com> cc: Marc Dionne <marc.dionne@auristor.com> cc: linux-afs@lists.infradead.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> diff 9a6b294a Thu Dec 21 06:57:31 MST 2023 David Howells <dhowells@redhat.com> afs: Fix use-after-free due to get/remove race in volume tree When an afs_volume struct is put, its refcount is reduced to 0 before the cell->volume_lock is taken and the volume removed from the cell->volumes tree. Unfortunately, this means that the lookup code can race and see a volume with a zero ref in the tree, resulting in a use-after-free: refcount_t: addition on 0; use-after-free. WARNING: CPU: 3 PID: 130782 at lib/refcount.c:25 refcount_warn_saturate+0x7a/0xda ... RIP: 0010:refcount_warn_saturate+0x7a/0xda ... Call Trace: afs_get_volume+0x3d/0x55 afs_create_volume+0x126/0x1de afs_validate_fc+0xfe/0x130 afs_get_tree+0x20/0x2e5 vfs_get_tree+0x1d/0xc9 do_new_mount+0x13b/0x22e do_mount+0x5d/0x8a __do_sys_mount+0x100/0x12a do_syscall_64+0x3a/0x94 entry_SYSCALL_64_after_hwframe+0x62/0x6a Fix this by: (1) When putting, use a flag to indicate if the volume has been removed from the tree and skip the rb_erase if it has. (2) When looking up, use a conditional ref increment and if it fails because the refcount is 0, replace the node in the tree and set the removal flag. Fixes: 20325960f875 ("afs: Reorganise volume and server trees to be rooted on the cell") Signed-off-by: David Howells <dhowells@redhat.com> Reviewed-by: Jeffrey Altman <jaltman@auristor.com> cc: Marc Dionne <marc.dionne@auristor.com> cc: linux-afs@lists.infradead.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> diff 9a6b294a Thu Dec 21 06:57:31 MST 2023 David Howells <dhowells@redhat.com> afs: Fix use-after-free due to get/remove race in volume tree When an afs_volume struct is put, its refcount is reduced to 0 before the cell->volume_lock is taken and the volume removed from the cell->volumes tree. Unfortunately, this means that the lookup code can race and see a volume with a zero ref in the tree, resulting in a use-after-free: refcount_t: addition on 0; use-after-free. WARNING: CPU: 3 PID: 130782 at lib/refcount.c:25 refcount_warn_saturate+0x7a/0xda ... RIP: 0010:refcount_warn_saturate+0x7a/0xda ... Call Trace: afs_get_volume+0x3d/0x55 afs_create_volume+0x126/0x1de afs_validate_fc+0xfe/0x130 afs_get_tree+0x20/0x2e5 vfs_get_tree+0x1d/0xc9 do_new_mount+0x13b/0x22e do_mount+0x5d/0x8a __do_sys_mount+0x100/0x12a do_syscall_64+0x3a/0x94 entry_SYSCALL_64_after_hwframe+0x62/0x6a Fix this by: (1) When putting, use a flag to indicate if the volume has been removed from the tree and skip the rb_erase if it has. (2) When looking up, use a conditional ref increment and if it fails because the refcount is 0, replace the node in the tree and set the removal flag. Fixes: 20325960f875 ("afs: Reorganise volume and server trees to be rooted on the cell") Signed-off-by: David Howells <dhowells@redhat.com> Reviewed-by: Jeffrey Altman <jaltman@auristor.com> cc: Marc Dionne <marc.dionne@auristor.com> cc: linux-afs@lists.infradead.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> diff 9a6b294a Thu Dec 21 06:57:31 MST 2023 David Howells <dhowells@redhat.com> afs: Fix use-after-free due to get/remove race in volume tree When an afs_volume struct is put, its refcount is reduced to 0 before the cell->volume_lock is taken and the volume removed from the cell->volumes tree. Unfortunately, this means that the lookup code can race and see a volume with a zero ref in the tree, resulting in a use-after-free: refcount_t: addition on 0; use-after-free. WARNING: CPU: 3 PID: 130782 at lib/refcount.c:25 refcount_warn_saturate+0x7a/0xda ... RIP: 0010:refcount_warn_saturate+0x7a/0xda ... Call Trace: afs_get_volume+0x3d/0x55 afs_create_volume+0x126/0x1de afs_validate_fc+0xfe/0x130 afs_get_tree+0x20/0x2e5 vfs_get_tree+0x1d/0xc9 do_new_mount+0x13b/0x22e do_mount+0x5d/0x8a __do_sys_mount+0x100/0x12a do_syscall_64+0x3a/0x94 entry_SYSCALL_64_after_hwframe+0x62/0x6a Fix this by: (1) When putting, use a flag to indicate if the volume has been removed from the tree and skip the rb_erase if it has. (2) When looking up, use a conditional ref increment and if it fails because the refcount is 0, replace the node in the tree and set the removal flag. Fixes: 20325960f875 ("afs: Reorganise volume and server trees to be rooted on the cell") Signed-off-by: David Howells <dhowells@redhat.com> Reviewed-by: Jeffrey Altman <jaltman@auristor.com> cc: Marc Dionne <marc.dionne@auristor.com> cc: linux-afs@lists.infradead.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> diff 9a6b294a Thu Dec 21 06:57:31 MST 2023 David Howells <dhowells@redhat.com> afs: Fix use-after-free due to get/remove race in volume tree When an afs_volume struct is put, its refcount is reduced to 0 before the cell->volume_lock is taken and the volume removed from the cell->volumes tree. Unfortunately, this means that the lookup code can race and see a volume with a zero ref in the tree, resulting in a use-after-free: refcount_t: addition on 0; use-after-free. WARNING: CPU: 3 PID: 130782 at lib/refcount.c:25 refcount_warn_saturate+0x7a/0xda ... RIP: 0010:refcount_warn_saturate+0x7a/0xda ... Call Trace: afs_get_volume+0x3d/0x55 afs_create_volume+0x126/0x1de afs_validate_fc+0xfe/0x130 afs_get_tree+0x20/0x2e5 vfs_get_tree+0x1d/0xc9 do_new_mount+0x13b/0x22e do_mount+0x5d/0x8a __do_sys_mount+0x100/0x12a do_syscall_64+0x3a/0x94 entry_SYSCALL_64_after_hwframe+0x62/0x6a Fix this by: (1) When putting, use a flag to indicate if the volume has been removed from the tree and skip the rb_erase if it has. (2) When looking up, use a conditional ref increment and if it fails because the refcount is 0, replace the node in the tree and set the removal flag. Fixes: 20325960f875 ("afs: Reorganise volume and server trees to be rooted on the cell") Signed-off-by: David Howells <dhowells@redhat.com> Reviewed-by: Jeffrey Altman <jaltman@auristor.com> cc: Marc Dionne <marc.dionne@auristor.com> cc: linux-afs@lists.infradead.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> diff 9a6b294a Thu Dec 21 06:57:31 MST 2023 David Howells <dhowells@redhat.com> afs: Fix use-after-free due to get/remove race in volume tree When an afs_volume struct is put, its refcount is reduced to 0 before the cell->volume_lock is taken and the volume removed from the cell->volumes tree. Unfortunately, this means that the lookup code can race and see a volume with a zero ref in the tree, resulting in a use-after-free: refcount_t: addition on 0; use-after-free. WARNING: CPU: 3 PID: 130782 at lib/refcount.c:25 refcount_warn_saturate+0x7a/0xda ... RIP: 0010:refcount_warn_saturate+0x7a/0xda ... Call Trace: afs_get_volume+0x3d/0x55 afs_create_volume+0x126/0x1de afs_validate_fc+0xfe/0x130 afs_get_tree+0x20/0x2e5 vfs_get_tree+0x1d/0xc9 do_new_mount+0x13b/0x22e do_mount+0x5d/0x8a __do_sys_mount+0x100/0x12a do_syscall_64+0x3a/0x94 entry_SYSCALL_64_after_hwframe+0x62/0x6a Fix this by: (1) When putting, use a flag to indicate if the volume has been removed from the tree and skip the rb_erase if it has. (2) When looking up, use a conditional ref increment and if it fails because the refcount is 0, replace the node in the tree and set the removal flag. Fixes: 20325960f875 ("afs: Reorganise volume and server trees to be rooted on the cell") Signed-off-by: David Howells <dhowells@redhat.com> Reviewed-by: Jeffrey Altman <jaltman@auristor.com> cc: Marc Dionne <marc.dionne@auristor.com> cc: linux-afs@lists.infradead.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> diff 9a6b294a Thu Dec 21 06:57:31 MST 2023 David Howells <dhowells@redhat.com> afs: Fix use-after-free due to get/remove race in volume tree When an afs_volume struct is put, its refcount is reduced to 0 before the cell->volume_lock is taken and the volume removed from the cell->volumes tree. Unfortunately, this means that the lookup code can race and see a volume with a zero ref in the tree, resulting in a use-after-free: refcount_t: addition on 0; use-after-free. WARNING: CPU: 3 PID: 130782 at lib/refcount.c:25 refcount_warn_saturate+0x7a/0xda ... RIP: 0010:refcount_warn_saturate+0x7a/0xda ... Call Trace: afs_get_volume+0x3d/0x55 afs_create_volume+0x126/0x1de afs_validate_fc+0xfe/0x130 afs_get_tree+0x20/0x2e5 vfs_get_tree+0x1d/0xc9 do_new_mount+0x13b/0x22e do_mount+0x5d/0x8a __do_sys_mount+0x100/0x12a do_syscall_64+0x3a/0x94 entry_SYSCALL_64_after_hwframe+0x62/0x6a Fix this by: (1) When putting, use a flag to indicate if the volume has been removed from the tree and skip the rb_erase if it has. (2) When looking up, use a conditional ref increment and if it fails because the refcount is 0, replace the node in the tree and set the removal flag. Fixes: 20325960f875 ("afs: Reorganise volume and server trees to be rooted on the cell") Signed-off-by: David Howells <dhowells@redhat.com> Reviewed-by: Jeffrey Altman <jaltman@auristor.com> cc: Marc Dionne <marc.dionne@auristor.com> cc: linux-afs@lists.infradead.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> diff 9a6b294a Thu Dec 21 06:57:31 MST 2023 David Howells <dhowells@redhat.com> afs: Fix use-after-free due to get/remove race in volume tree When an afs_volume struct is put, its refcount is reduced to 0 before the cell->volume_lock is taken and the volume removed from the cell->volumes tree. Unfortunately, this means that the lookup code can race and see a volume with a zero ref in the tree, resulting in a use-after-free: refcount_t: addition on 0; use-after-free. WARNING: CPU: 3 PID: 130782 at lib/refcount.c:25 refcount_warn_saturate+0x7a/0xda ... RIP: 0010:refcount_warn_saturate+0x7a/0xda ... Call Trace: afs_get_volume+0x3d/0x55 afs_create_volume+0x126/0x1de afs_validate_fc+0xfe/0x130 afs_get_tree+0x20/0x2e5 vfs_get_tree+0x1d/0xc9 do_new_mount+0x13b/0x22e do_mount+0x5d/0x8a __do_sys_mount+0x100/0x12a do_syscall_64+0x3a/0x94 entry_SYSCALL_64_after_hwframe+0x62/0x6a Fix this by: (1) When putting, use a flag to indicate if the volume has been removed from the tree and skip the rb_erase if it has. (2) When looking up, use a conditional ref increment and if it fails because the refcount is 0, replace the node in the tree and set the removal flag. Fixes: 20325960f875 ("afs: Reorganise volume and server trees to be rooted on the cell") Signed-off-by: David Howells <dhowells@redhat.com> Reviewed-by: Jeffrey Altman <jaltman@auristor.com> cc: Marc Dionne <marc.dionne@auristor.com> cc: linux-afs@lists.infradead.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> diff 9a6b294a Thu Dec 21 06:57:31 MST 2023 David Howells <dhowells@redhat.com> afs: Fix use-after-free due to get/remove race in volume tree When an afs_volume struct is put, its refcount is reduced to 0 before the cell->volume_lock is taken and the volume removed from the cell->volumes tree. Unfortunately, this means that the lookup code can race and see a volume with a zero ref in the tree, resulting in a use-after-free: refcount_t: addition on 0; use-after-free. WARNING: CPU: 3 PID: 130782 at lib/refcount.c:25 refcount_warn_saturate+0x7a/0xda ... RIP: 0010:refcount_warn_saturate+0x7a/0xda ... Call Trace: afs_get_volume+0x3d/0x55 afs_create_volume+0x126/0x1de afs_validate_fc+0xfe/0x130 afs_get_tree+0x20/0x2e5 vfs_get_tree+0x1d/0xc9 do_new_mount+0x13b/0x22e do_mount+0x5d/0x8a __do_sys_mount+0x100/0x12a do_syscall_64+0x3a/0x94 entry_SYSCALL_64_after_hwframe+0x62/0x6a Fix this by: (1) When putting, use a flag to indicate if the volume has been removed from the tree and skip the rb_erase if it has. (2) When looking up, use a conditional ref increment and if it fails because the refcount is 0, replace the node in the tree and set the removal flag. Fixes: 20325960f875 ("afs: Reorganise volume and server trees to be rooted on the cell") Signed-off-by: David Howells <dhowells@redhat.com> Reviewed-by: Jeffrey Altman <jaltman@auristor.com> cc: Marc Dionne <marc.dionne@auristor.com> cc: linux-afs@lists.infradead.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> diff 9a6b294a Thu Dec 21 06:57:31 MST 2023 David Howells <dhowells@redhat.com> afs: Fix use-after-free due to get/remove race in volume tree When an afs_volume struct is put, its refcount is reduced to 0 before the cell->volume_lock is taken and the volume removed from the cell->volumes tree. Unfortunately, this means that the lookup code can race and see a volume with a zero ref in the tree, resulting in a use-after-free: refcount_t: addition on 0; use-after-free. WARNING: CPU: 3 PID: 130782 at lib/refcount.c:25 refcount_warn_saturate+0x7a/0xda ... RIP: 0010:refcount_warn_saturate+0x7a/0xda ... Call Trace: afs_get_volume+0x3d/0x55 afs_create_volume+0x126/0x1de afs_validate_fc+0xfe/0x130 afs_get_tree+0x20/0x2e5 vfs_get_tree+0x1d/0xc9 do_new_mount+0x13b/0x22e do_mount+0x5d/0x8a __do_sys_mount+0x100/0x12a do_syscall_64+0x3a/0x94 entry_SYSCALL_64_after_hwframe+0x62/0x6a Fix this by: (1) When putting, use a flag to indicate if the volume has been removed from the tree and skip the rb_erase if it has. (2) When looking up, use a conditional ref increment and if it fails because the refcount is 0, replace the node in the tree and set the removal flag. Fixes: 20325960f875 ("afs: Reorganise volume and server trees to be rooted on the cell") Signed-off-by: David Howells <dhowells@redhat.com> Reviewed-by: Jeffrey Altman <jaltman@auristor.com> cc: Marc Dionne <marc.dionne@auristor.com> cc: linux-afs@lists.infradead.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> diff 9a6b294a Thu Dec 21 06:57:31 MST 2023 David Howells <dhowells@redhat.com> afs: Fix use-after-free due to get/remove race in volume tree When an afs_volume struct is put, its refcount is reduced to 0 before the cell->volume_lock is taken and the volume removed from the cell->volumes tree. Unfortunately, this means that the lookup code can race and see a volume with a zero ref in the tree, resulting in a use-after-free: refcount_t: addition on 0; use-after-free. WARNING: CPU: 3 PID: 130782 at lib/refcount.c:25 refcount_warn_saturate+0x7a/0xda ... RIP: 0010:refcount_warn_saturate+0x7a/0xda ... Call Trace: afs_get_volume+0x3d/0x55 afs_create_volume+0x126/0x1de afs_validate_fc+0xfe/0x130 afs_get_tree+0x20/0x2e5 vfs_get_tree+0x1d/0xc9 do_new_mount+0x13b/0x22e do_mount+0x5d/0x8a __do_sys_mount+0x100/0x12a do_syscall_64+0x3a/0x94 entry_SYSCALL_64_after_hwframe+0x62/0x6a Fix this by: (1) When putting, use a flag to indicate if the volume has been removed from the tree and skip the rb_erase if it has. (2) When looking up, use a conditional ref increment and if it fails because the refcount is 0, replace the node in the tree and set the removal flag. Fixes: 20325960f875 ("afs: Reorganise volume and server trees to be rooted on the cell") Signed-off-by: David Howells <dhowells@redhat.com> Reviewed-by: Jeffrey Altman <jaltman@auristor.com> cc: Marc Dionne <marc.dionne@auristor.com> cc: linux-afs@lists.infradead.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> diff 9a6b294a Thu Dec 21 06:57:31 MST 2023 David Howells <dhowells@redhat.com> afs: Fix use-after-free due to get/remove race in volume tree When an afs_volume struct is put, its refcount is reduced to 0 before the cell->volume_lock is taken and the volume removed from the cell->volumes tree. Unfortunately, this means that the lookup code can race and see a volume with a zero ref in the tree, resulting in a use-after-free: refcount_t: addition on 0; use-after-free. WARNING: CPU: 3 PID: 130782 at lib/refcount.c:25 refcount_warn_saturate+0x7a/0xda ... RIP: 0010:refcount_warn_saturate+0x7a/0xda ... Call Trace: afs_get_volume+0x3d/0x55 afs_create_volume+0x126/0x1de afs_validate_fc+0xfe/0x130 afs_get_tree+0x20/0x2e5 vfs_get_tree+0x1d/0xc9 do_new_mount+0x13b/0x22e do_mount+0x5d/0x8a __do_sys_mount+0x100/0x12a do_syscall_64+0x3a/0x94 entry_SYSCALL_64_after_hwframe+0x62/0x6a Fix this by: (1) When putting, use a flag to indicate if the volume has been removed from the tree and skip the rb_erase if it has. (2) When looking up, use a conditional ref increment and if it fails because the refcount is 0, replace the node in the tree and set the removal flag. Fixes: 20325960f875 ("afs: Reorganise volume and server trees to be rooted on the cell") Signed-off-by: David Howells <dhowells@redhat.com> Reviewed-by: Jeffrey Altman <jaltman@auristor.com> cc: Marc Dionne <marc.dionne@auristor.com> cc: linux-afs@lists.infradead.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> diff 9a6b294a Thu Dec 21 06:57:31 MST 2023 David Howells <dhowells@redhat.com> afs: Fix use-after-free due to get/remove race in volume tree When an afs_volume struct is put, its refcount is reduced to 0 before the cell->volume_lock is taken and the volume removed from the cell->volumes tree. Unfortunately, this means that the lookup code can race and see a volume with a zero ref in the tree, resulting in a use-after-free: refcount_t: addition on 0; use-after-free. WARNING: CPU: 3 PID: 130782 at lib/refcount.c:25 refcount_warn_saturate+0x7a/0xda ... RIP: 0010:refcount_warn_saturate+0x7a/0xda ... Call Trace: afs_get_volume+0x3d/0x55 afs_create_volume+0x126/0x1de afs_validate_fc+0xfe/0x130 afs_get_tree+0x20/0x2e5 vfs_get_tree+0x1d/0xc9 do_new_mount+0x13b/0x22e do_mount+0x5d/0x8a __do_sys_mount+0x100/0x12a do_syscall_64+0x3a/0x94 entry_SYSCALL_64_after_hwframe+0x62/0x6a Fix this by: (1) When putting, use a flag to indicate if the volume has been removed from the tree and skip the rb_erase if it has. (2) When looking up, use a conditional ref increment and if it fails because the refcount is 0, replace the node in the tree and set the removal flag. Fixes: 20325960f875 ("afs: Reorganise volume and server trees to be rooted on the cell") Signed-off-by: David Howells <dhowells@redhat.com> Reviewed-by: Jeffrey Altman <jaltman@auristor.com> cc: Marc Dionne <marc.dionne@auristor.com> cc: linux-afs@lists.infradead.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> diff 9a6b294a Thu Dec 21 06:57:31 MST 2023 David Howells <dhowells@redhat.com> afs: Fix use-after-free due to get/remove race in volume tree When an afs_volume struct is put, its refcount is reduced to 0 before the cell->volume_lock is taken and the volume removed from the cell->volumes tree. Unfortunately, this means that the lookup code can race and see a volume with a zero ref in the tree, resulting in a use-after-free: refcount_t: addition on 0; use-after-free. WARNING: CPU: 3 PID: 130782 at lib/refcount.c:25 refcount_warn_saturate+0x7a/0xda ... RIP: 0010:refcount_warn_saturate+0x7a/0xda ... Call Trace: afs_get_volume+0x3d/0x55 afs_create_volume+0x126/0x1de afs_validate_fc+0xfe/0x130 afs_get_tree+0x20/0x2e5 vfs_get_tree+0x1d/0xc9 do_new_mount+0x13b/0x22e do_mount+0x5d/0x8a __do_sys_mount+0x100/0x12a do_syscall_64+0x3a/0x94 entry_SYSCALL_64_after_hwframe+0x62/0x6a Fix this by: (1) When putting, use a flag to indicate if the volume has been removed from the tree and skip the rb_erase if it has. (2) When looking up, use a conditional ref increment and if it fails because the refcount is 0, replace the node in the tree and set the removal flag. Fixes: 20325960f875 ("afs: Reorganise volume and server trees to be rooted on the cell") Signed-off-by: David Howells <dhowells@redhat.com> Reviewed-by: Jeffrey Altman <jaltman@auristor.com> cc: Marc Dionne <marc.dionne@auristor.com> cc: linux-afs@lists.infradead.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> diff 9a6b294a Thu Dec 21 06:57:31 MST 2023 David Howells <dhowells@redhat.com> afs: Fix use-after-free due to get/remove race in volume tree When an afs_volume struct is put, its refcount is reduced to 0 before the cell->volume_lock is taken and the volume removed from the cell->volumes tree. Unfortunately, this means that the lookup code can race and see a volume with a zero ref in the tree, resulting in a use-after-free: refcount_t: addition on 0; use-after-free. WARNING: CPU: 3 PID: 130782 at lib/refcount.c:25 refcount_warn_saturate+0x7a/0xda ... RIP: 0010:refcount_warn_saturate+0x7a/0xda ... Call Trace: afs_get_volume+0x3d/0x55 afs_create_volume+0x126/0x1de afs_validate_fc+0xfe/0x130 afs_get_tree+0x20/0x2e5 vfs_get_tree+0x1d/0xc9 do_new_mount+0x13b/0x22e do_mount+0x5d/0x8a __do_sys_mount+0x100/0x12a do_syscall_64+0x3a/0x94 entry_SYSCALL_64_after_hwframe+0x62/0x6a Fix this by: (1) When putting, use a flag to indicate if the volume has been removed from the tree and skip the rb_erase if it has. (2) When looking up, use a conditional ref increment and if it fails because the refcount is 0, replace the node in the tree and set the removal flag. Fixes: 20325960f875 ("afs: Reorganise volume and server trees to be rooted on the cell") Signed-off-by: David Howells <dhowells@redhat.com> Reviewed-by: Jeffrey Altman <jaltman@auristor.com> cc: Marc Dionne <marc.dionne@auristor.com> cc: linux-afs@lists.infradead.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> diff 9a6b294a Thu Dec 21 06:57:31 MST 2023 David Howells <dhowells@redhat.com> afs: Fix use-after-free due to get/remove race in volume tree When an afs_volume struct is put, its refcount is reduced to 0 before the cell->volume_lock is taken and the volume removed from the cell->volumes tree. Unfortunately, this means that the lookup code can race and see a volume with a zero ref in the tree, resulting in a use-after-free: refcount_t: addition on 0; use-after-free. WARNING: CPU: 3 PID: 130782 at lib/refcount.c:25 refcount_warn_saturate+0x7a/0xda ... RIP: 0010:refcount_warn_saturate+0x7a/0xda ... Call Trace: afs_get_volume+0x3d/0x55 afs_create_volume+0x126/0x1de afs_validate_fc+0xfe/0x130 afs_get_tree+0x20/0x2e5 vfs_get_tree+0x1d/0xc9 do_new_mount+0x13b/0x22e do_mount+0x5d/0x8a __do_sys_mount+0x100/0x12a do_syscall_64+0x3a/0x94 entry_SYSCALL_64_after_hwframe+0x62/0x6a Fix this by: (1) When putting, use a flag to indicate if the volume has been removed from the tree and skip the rb_erase if it has. (2) When looking up, use a conditional ref increment and if it fails because the refcount is 0, replace the node in the tree and set the removal flag. Fixes: 20325960f875 ("afs: Reorganise volume and server trees to be rooted on the cell") Signed-off-by: David Howells <dhowells@redhat.com> Reviewed-by: Jeffrey Altman <jaltman@auristor.com> cc: Marc Dionne <marc.dionne@auristor.com> cc: linux-afs@lists.infradead.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> diff 9a6b294a Thu Dec 21 06:57:31 MST 2023 David Howells <dhowells@redhat.com> afs: Fix use-after-free due to get/remove race in volume tree When an afs_volume struct is put, its refcount is reduced to 0 before the cell->volume_lock is taken and the volume removed from the cell->volumes tree. Unfortunately, this means that the lookup code can race and see a volume with a zero ref in the tree, resulting in a use-after-free: refcount_t: addition on 0; use-after-free. WARNING: CPU: 3 PID: 130782 at lib/refcount.c:25 refcount_warn_saturate+0x7a/0xda ... RIP: 0010:refcount_warn_saturate+0x7a/0xda ... Call Trace: afs_get_volume+0x3d/0x55 afs_create_volume+0x126/0x1de afs_validate_fc+0xfe/0x130 afs_get_tree+0x20/0x2e5 vfs_get_tree+0x1d/0xc9 do_new_mount+0x13b/0x22e do_mount+0x5d/0x8a __do_sys_mount+0x100/0x12a do_syscall_64+0x3a/0x94 entry_SYSCALL_64_after_hwframe+0x62/0x6a Fix this by: (1) When putting, use a flag to indicate if the volume has been removed from the tree and skip the rb_erase if it has. (2) When looking up, use a conditional ref increment and if it fails because the refcount is 0, replace the node in the tree and set the removal flag. Fixes: 20325960f875 ("afs: Reorganise volume and server trees to be rooted on the cell") Signed-off-by: David Howells <dhowells@redhat.com> Reviewed-by: Jeffrey Altman <jaltman@auristor.com> cc: Marc Dionne <marc.dionne@auristor.com> cc: linux-afs@lists.infradead.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> diff 9a6b294a Thu Dec 21 06:57:31 MST 2023 David Howells <dhowells@redhat.com> afs: Fix use-after-free due to get/remove race in volume tree When an afs_volume struct is put, its refcount is reduced to 0 before the cell->volume_lock is taken and the volume removed from the cell->volumes tree. Unfortunately, this means that the lookup code can race and see a volume with a zero ref in the tree, resulting in a use-after-free: refcount_t: addition on 0; use-after-free. WARNING: CPU: 3 PID: 130782 at lib/refcount.c:25 refcount_warn_saturate+0x7a/0xda ... RIP: 0010:refcount_warn_saturate+0x7a/0xda ... Call Trace: afs_get_volume+0x3d/0x55 afs_create_volume+0x126/0x1de afs_validate_fc+0xfe/0x130 afs_get_tree+0x20/0x2e5 vfs_get_tree+0x1d/0xc9 do_new_mount+0x13b/0x22e do_mount+0x5d/0x8a __do_sys_mount+0x100/0x12a do_syscall_64+0x3a/0x94 entry_SYSCALL_64_after_hwframe+0x62/0x6a Fix this by: (1) When putting, use a flag to indicate if the volume has been removed from the tree and skip the rb_erase if it has. (2) When looking up, use a conditional ref increment and if it fails because the refcount is 0, replace the node in the tree and set the removal flag. Fixes: 20325960f875 ("afs: Reorganise volume and server trees to be rooted on the cell") Signed-off-by: David Howells <dhowells@redhat.com> Reviewed-by: Jeffrey Altman <jaltman@auristor.com> cc: Marc Dionne <marc.dionne@auristor.com> cc: linux-afs@lists.infradead.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> diff 9a6b294a Thu Dec 21 06:57:31 MST 2023 David Howells <dhowells@redhat.com> afs: Fix use-after-free due to get/remove race in volume tree When an afs_volume struct is put, its refcount is reduced to 0 before the cell->volume_lock is taken and the volume removed from the cell->volumes tree. Unfortunately, this means that the lookup code can race and see a volume with a zero ref in the tree, resulting in a use-after-free: refcount_t: addition on 0; use-after-free. WARNING: CPU: 3 PID: 130782 at lib/refcount.c:25 refcount_warn_saturate+0x7a/0xda ... RIP: 0010:refcount_warn_saturate+0x7a/0xda ... Call Trace: afs_get_volume+0x3d/0x55 afs_create_volume+0x126/0x1de afs_validate_fc+0xfe/0x130 afs_get_tree+0x20/0x2e5 vfs_get_tree+0x1d/0xc9 do_new_mount+0x13b/0x22e do_mount+0x5d/0x8a __do_sys_mount+0x100/0x12a do_syscall_64+0x3a/0x94 entry_SYSCALL_64_after_hwframe+0x62/0x6a Fix this by: (1) When putting, use a flag to indicate if the volume has been removed from the tree and skip the rb_erase if it has. (2) When looking up, use a conditional ref increment and if it fails because the refcount is 0, replace the node in the tree and set the removal flag. Fixes: 20325960f875 ("afs: Reorganise volume and server trees to be rooted on the cell") Signed-off-by: David Howells <dhowells@redhat.com> Reviewed-by: Jeffrey Altman <jaltman@auristor.com> cc: Marc Dionne <marc.dionne@auristor.com> cc: linux-afs@lists.infradead.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> diff 9a6b294a Thu Dec 21 06:57:31 MST 2023 David Howells <dhowells@redhat.com> afs: Fix use-after-free due to get/remove race in volume tree When an afs_volume struct is put, its refcount is reduced to 0 before the cell->volume_lock is taken and the volume removed from the cell->volumes tree. Unfortunately, this means that the lookup code can race and see a volume with a zero ref in the tree, resulting in a use-after-free: refcount_t: addition on 0; use-after-free. WARNING: CPU: 3 PID: 130782 at lib/refcount.c:25 refcount_warn_saturate+0x7a/0xda ... RIP: 0010:refcount_warn_saturate+0x7a/0xda ... Call Trace: afs_get_volume+0x3d/0x55 afs_create_volume+0x126/0x1de afs_validate_fc+0xfe/0x130 afs_get_tree+0x20/0x2e5 vfs_get_tree+0x1d/0xc9 do_new_mount+0x13b/0x22e do_mount+0x5d/0x8a __do_sys_mount+0x100/0x12a do_syscall_64+0x3a/0x94 entry_SYSCALL_64_after_hwframe+0x62/0x6a Fix this by: (1) When putting, use a flag to indicate if the volume has been removed from the tree and skip the rb_erase if it has. (2) When looking up, use a conditional ref increment and if it fails because the refcount is 0, replace the node in the tree and set the removal flag. Fixes: 20325960f875 ("afs: Reorganise volume and server trees to be rooted on the cell") Signed-off-by: David Howells <dhowells@redhat.com> Reviewed-by: Jeffrey Altman <jaltman@auristor.com> cc: Marc Dionne <marc.dionne@auristor.com> cc: linux-afs@lists.infradead.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> diff 9a6b294a Thu Dec 21 06:57:31 MST 2023 David Howells <dhowells@redhat.com> afs: Fix use-after-free due to get/remove race in volume tree When an afs_volume struct is put, its refcount is reduced to 0 before the cell->volume_lock is taken and the volume removed from the cell->volumes tree. Unfortunately, this means that the lookup code can race and see a volume with a zero ref in the tree, resulting in a use-after-free: refcount_t: addition on 0; use-after-free. WARNING: CPU: 3 PID: 130782 at lib/refcount.c:25 refcount_warn_saturate+0x7a/0xda ... RIP: 0010:refcount_warn_saturate+0x7a/0xda ... Call Trace: afs_get_volume+0x3d/0x55 afs_create_volume+0x126/0x1de afs_validate_fc+0xfe/0x130 afs_get_tree+0x20/0x2e5 vfs_get_tree+0x1d/0xc9 do_new_mount+0x13b/0x22e do_mount+0x5d/0x8a __do_sys_mount+0x100/0x12a do_syscall_64+0x3a/0x94 entry_SYSCALL_64_after_hwframe+0x62/0x6a Fix this by: (1) When putting, use a flag to indicate if the volume has been removed from the tree and skip the rb_erase if it has. (2) When looking up, use a conditional ref increment and if it fails because the refcount is 0, replace the node in the tree and set the removal flag. Fixes: 20325960f875 ("afs: Reorganise volume and server trees to be rooted on the cell") Signed-off-by: David Howells <dhowells@redhat.com> Reviewed-by: Jeffrey Altman <jaltman@auristor.com> cc: Marc Dionne <marc.dionne@auristor.com> cc: linux-afs@lists.infradead.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> diff 9a6b294a Thu Dec 21 06:57:31 MST 2023 David Howells <dhowells@redhat.com> afs: Fix use-after-free due to get/remove race in volume tree When an afs_volume struct is put, its refcount is reduced to 0 before the cell->volume_lock is taken and the volume removed from the cell->volumes tree. Unfortunately, this means that the lookup code can race and see a volume with a zero ref in the tree, resulting in a use-after-free: refcount_t: addition on 0; use-after-free. WARNING: CPU: 3 PID: 130782 at lib/refcount.c:25 refcount_warn_saturate+0x7a/0xda ... RIP: 0010:refcount_warn_saturate+0x7a/0xda ... Call Trace: afs_get_volume+0x3d/0x55 afs_create_volume+0x126/0x1de afs_validate_fc+0xfe/0x130 afs_get_tree+0x20/0x2e5 vfs_get_tree+0x1d/0xc9 do_new_mount+0x13b/0x22e do_mount+0x5d/0x8a __do_sys_mount+0x100/0x12a do_syscall_64+0x3a/0x94 entry_SYSCALL_64_after_hwframe+0x62/0x6a Fix this by: (1) When putting, use a flag to indicate if the volume has been removed from the tree and skip the rb_erase if it has. (2) When looking up, use a conditional ref increment and if it fails because the refcount is 0, replace the node in the tree and set the removal flag. Fixes: 20325960f875 ("afs: Reorganise volume and server trees to be rooted on the cell") Signed-off-by: David Howells <dhowells@redhat.com> Reviewed-by: Jeffrey Altman <jaltman@auristor.com> cc: Marc Dionne <marc.dionne@auristor.com> cc: linux-afs@lists.infradead.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> diff 9a6b294a Thu Dec 21 06:57:31 MST 2023 David Howells <dhowells@redhat.com> afs: Fix use-after-free due to get/remove race in volume tree When an afs_volume struct is put, its refcount is reduced to 0 before the cell->volume_lock is taken and the volume removed from the cell->volumes tree. Unfortunately, this means that the lookup code can race and see a volume with a zero ref in the tree, resulting in a use-after-free: refcount_t: addition on 0; use-after-free. WARNING: CPU: 3 PID: 130782 at lib/refcount.c:25 refcount_warn_saturate+0x7a/0xda ... RIP: 0010:refcount_warn_saturate+0x7a/0xda ... Call Trace: afs_get_volume+0x3d/0x55 afs_create_volume+0x126/0x1de afs_validate_fc+0xfe/0x130 afs_get_tree+0x20/0x2e5 vfs_get_tree+0x1d/0xc9 do_new_mount+0x13b/0x22e do_mount+0x5d/0x8a __do_sys_mount+0x100/0x12a do_syscall_64+0x3a/0x94 entry_SYSCALL_64_after_hwframe+0x62/0x6a Fix this by: (1) When putting, use a flag to indicate if the volume has been removed from the tree and skip the rb_erase if it has. (2) When looking up, use a conditional ref increment and if it fails because the refcount is 0, replace the node in the tree and set the removal flag. Fixes: 20325960f875 ("afs: Reorganise volume and server trees to be rooted on the cell") Signed-off-by: David Howells <dhowells@redhat.com> Reviewed-by: Jeffrey Altman <jaltman@auristor.com> cc: Marc Dionne <marc.dionne@auristor.com> cc: linux-afs@lists.infradead.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> diff 9a6b294a Thu Dec 21 06:57:31 MST 2023 David Howells <dhowells@redhat.com> afs: Fix use-after-free due to get/remove race in volume tree When an afs_volume struct is put, its refcount is reduced to 0 before the cell->volume_lock is taken and the volume removed from the cell->volumes tree. Unfortunately, this means that the lookup code can race and see a volume with a zero ref in the tree, resulting in a use-after-free: refcount_t: addition on 0; use-after-free. WARNING: CPU: 3 PID: 130782 at lib/refcount.c:25 refcount_warn_saturate+0x7a/0xda ... RIP: 0010:refcount_warn_saturate+0x7a/0xda ... Call Trace: afs_get_volume+0x3d/0x55 afs_create_volume+0x126/0x1de afs_validate_fc+0xfe/0x130 afs_get_tree+0x20/0x2e5 vfs_get_tree+0x1d/0xc9 do_new_mount+0x13b/0x22e do_mount+0x5d/0x8a __do_sys_mount+0x100/0x12a do_syscall_64+0x3a/0x94 entry_SYSCALL_64_after_hwframe+0x62/0x6a Fix this by: (1) When putting, use a flag to indicate if the volume has been removed from the tree and skip the rb_erase if it has. (2) When looking up, use a conditional ref increment and if it fails because the refcount is 0, replace the node in the tree and set the removal flag. Fixes: 20325960f875 ("afs: Reorganise volume and server trees to be rooted on the cell") Signed-off-by: David Howells <dhowells@redhat.com> Reviewed-by: Jeffrey Altman <jaltman@auristor.com> cc: Marc Dionne <marc.dionne@auristor.com> cc: linux-afs@lists.infradead.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
Completed in 687 milliseconds