/* * CDDL HEADER START * * The contents of this file are subject to the terms of the * Common Development and Distribution License (the "License"). * You may not use this file except in compliance with the License. * * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE * or http://www.opensolaris.org/os/licensing. * See the License for the specific language governing permissions * and limitations under the License. * * When distributing Covered Code, include this CDDL HEADER in each * file and include the License file at usr/src/OPENSOLARIS.LICENSE. * If applicable, add the following below this CDDL HEADER, with the * fields enclosed by brackets "[]" replaced with your own identifying * information: Portions Copyright [yyyy] [name of copyright owner] * * CDDL HEADER END */ /* * Copyright 2009 Sun Microsystems, Inc. All rights reserved. * Use is subject to license terms. */ /* * ADS (Analog Devices) codec extensions. */ /* * TODO: * * Most vendors connect the surr-out of ad1980/ad1985 codecs to the * line-out jack. So far we haven't found which vendors don't * do that. So we assume that all vendors swap the surr-out * and the line-out outputs. So we need swap the two outputs. * * Historically we internally processed the "ad198x-swap-output" * property. If someday some vendors do not swap the outputs, we would * set "ad198x-swap-output = 0" in the driver.conf file, and unload * and reload the driver (or reboot). * * TODO: * * Since we don't have access (at present) to any such systems, we have * not implemented this swapping property. Once we can test it, we will * add it. This is noted as CR 6819556. * * The old code did this: * * if (ddi_prop_get_int(DDI_DEV_T_ANY, statep->dip, * DDI_PROP_DONTPASS, "ad198x-swap-output", 1) == 1) { * statep->swap_out = B_TRUE; * (void) audioixp_read_ac97(statep, CODEC_AD_REG_MISC, &tmp); * (void) audioixp_write_ac97(statep, * CODEC_AD_REG_MISC, * tmp | AD1980_MISC_LOSEL | AD1980_MISC_HPSEL); * */ #include #include #include #include #include #include #include "ac97_impl.h" #define ADS_EQ_CTRL_REGISTER 0x60 #define AECR_EQM 0x8000 /* disable EQ */ #define AECR_SYM 0x0080 #define ADS_EQ_DATA_REGISTER 0x62 #define ADS_MIXER_ADC_IGAIN_REGISTER 0x64 #define AMADIR_LEFT_MASK 0x0f00 #define AMADIR_RIGHT_MASK 0x000f #define AMADIR_MXM 0x8000 #define ADS_JS_INTS_STATUS_REGISTER 0x72 #define AJISR_JS0INT 0x0001 #define AJISR_JS1INT 0x0002 #define AJISR_JS0ST 0x0004 #define AJISR_JS1ST 0x0008 #define AJISR_JS0MD 0x0010 #define AJISR_JS1MD 0x0020 #define AJISR_JS0TMR 0x0040 #define AJISR_JS1TMR 0x0080 #define AJISR_JS0EQB 0x0100 #define AJISR_JS1EQB 0x0200 #define AJISR_JSMT_MASK 0x1c00 #define AJISR_JSMT_NONE 0x0000 #define AJISR_JSMT_HP_LNOUT 0x0400 /* hp mutes line out */ #define AJISR_JSMT_HP_BOTH 0x0800 /* hp mutes both mono & line */ #define AJISR_JSMT_LNOUT_MONO 0x1000 /* lineout mutes mono */ #define AJISR_JSMT_ALL 0x1800 /* all JS muting enabled */ #define ADS_SERIAL_CFG_REGISTER 0x74 #define ASCR_SPLNK 0x0001 #define ASCR_SPDZ 0x0002 #define ASCR_SPAL 0x0004 #define ASCR_INTS 0x0010 #define ASCR_CHEN 0x0100 #define ASCR_REGM0 0x1000 #define ASCR_REGM1 0x2000 #define ASCR_REGM2 0x4000 #define ASCR_SLOT16 0x8000 #define ADS_MISC_CFG_REGISTER 0x76 #define AMCR_MBG_MASK 0x0003 #define AMCR_MBG_20dB 0x0000 #define AMCR_MBG_10dB 0x0001 #define AMCR_MBG_30dB 0x0002 #define AMCR_VREFD 0x0004 #define AMCR_VREFH 0x0008 #define AMCR_MADST 0x0010 /* AD1981B */ #define AMCR_SRU 0x0010 /* AD1980 */ #define AMCR_LOSEL 0x0020 /* AD1980 */ #define AMCR_2CMIC 0x0040 #define AMCR_MADPD 0x0080 /* AD1981B */ #define AMCR_SPRD 0x0080 /* AD1980 */ #define AMCR_DMIX_6TO2 0x0100 /* AD1980 */ #define AMCR_DMIX_FORCE 0x0200 /* AD1980 */ #define AMCR_FMXE 0x0200 /* AD1981B */ #define AMCR_HPSEL 0x0400 /* AD1980 */ #define AMCR_CLDIS 0x0800 /* AD1980 */ #define AMCR_LODIS 0x1000 /* AD1980 */ #define AMCR_DAM 0x0800 /* AD1981B */ #define AMCR_MSPLT 0x2000 #define AMCR_AC97NC 0x4000 /* AD1980 */ #define AMCR_DACZ 0x8000 static void ads_set_micboost(ac97_ctrl_t *actrl, uint64_t value) { ac97_t *ac = actrl->actrl_ac97; uint16_t v; ac97_wr(ac, AC97_INTERRUPT_PAGING_REGISTER, 0); /* select page 0 */ switch (value) { case 0x1: /* 0db */ ac97_clr(ac, AC97_MIC_VOLUME_REGISTER, MICVR_20dB_BOOST); break; case 0x2: /* 10dB */ ac97_set(ac, AC97_MIC_VOLUME_REGISTER, MICVR_20dB_BOOST); v = ac97_rd(ac, ADS_MISC_CFG_REGISTER); v &= ~AMCR_MBG_MASK; v |= AMCR_MBG_10dB; ac97_wr(ac, ADS_MISC_CFG_REGISTER, v); break; case 0x4: /* 20dB */ ac97_set(ac, AC97_MIC_VOLUME_REGISTER, MICVR_20dB_BOOST); v = ac97_rd(ac, ADS_MISC_CFG_REGISTER); v &= ~AMCR_MBG_MASK; v |= AMCR_MBG_20dB; ac97_wr(ac, ADS_MISC_CFG_REGISTER, v); break; case 0x8: /* 30dB */ ac97_set(ac, AC97_MIC_VOLUME_REGISTER, MICVR_20dB_BOOST); v = ac97_rd(ac, ADS_MISC_CFG_REGISTER); v &= ~AMCR_MBG_MASK; v |= AMCR_MBG_30dB; ac97_wr(ac, ADS_MISC_CFG_REGISTER, v); break; } } static void ads_set_micsrc(ac97_ctrl_t *actrl, uint64_t value) { ac97_t *ac = actrl->actrl_ac97; ac97_wr(ac, AC97_INTERRUPT_PAGING_REGISTER, 0); /* select page 0 */ switch (value) { case 0x1: /* mic1 */ ac97_clr(ac, ADS_MISC_CFG_REGISTER, AMCR_2CMIC); ac97_clr(ac, AC97_GENERAL_PURPOSE_REGISTER, GPR_MS_MIC2); break; case 0x2: /* mic2 */ ac97_clr(ac, ADS_MISC_CFG_REGISTER, AMCR_2CMIC); ac97_set(ac, AC97_GENERAL_PURPOSE_REGISTER, GPR_MS_MIC2); break; case 0x4: /* stereo - ms bit clear to allow MIC1 to be mixed */ ac97_set(ac, ADS_MISC_CFG_REGISTER, AMCR_2CMIC); ac97_clr(ac, AC97_GENERAL_PURPOSE_REGISTER, GPR_MS_MIC2); break; } } static void ads_setup_micsrc(ac97_t *ac) { ac97_ctrl_t *ctrl; static const char *values[] = { AUDIO_PORT_MIC1, AUDIO_PORT_MIC2, AUDIO_PORT_STEREO, NULL }; ac97_ctrl_probe_t cpt = { AUDIO_CTRL_ID_MICSRC, 1, 0x7, 0x7, AUDIO_CTRL_TYPE_ENUM, AC97_FLAGS | AUDIO_CTRL_FLAG_REC, 0, ads_set_micsrc, NULL, 0, values }; ctrl = ac97_control_find(ac, AUDIO_CTRL_ID_MICSRC); if (ctrl) { ac97_free_control(ctrl); } ac97_alloc_control(ac, &cpt); } static void ads_setup_micboost(ac97_t *ac) { ac97_ctrl_t *ctrl; static const char *values[] = { AUDIO_VALUE_OFF, /* 0dB */ AUDIO_VALUE_LOW, /* 10dB */ AUDIO_VALUE_MEDIUM, /* 20dB */ AUDIO_VALUE_HIGH, /* 30dB */ NULL }; ac97_ctrl_probe_t cpt = { AUDIO_CTRL_ID_MICBOOST, 1, 0xf, 0xf, AUDIO_CTRL_TYPE_ENUM, AC97_FLAGS | AUDIO_CTRL_FLAG_REC, 0, ads_set_micboost, NULL, 0, values }; ctrl = ac97_control_find(ac, AUDIO_CTRL_ID_MICBOOST); if (ctrl) { if (ctrl->actrl_initval) { /* 20dB by default */ cpt.cp_initval = 2; } ac97_free_control(ctrl); } ac97_alloc_control(ac, &cpt); } void ad1981a_init(ac97_t *ac) { ads_setup_micboost(ac); } void ad1981b_init(ac97_t *ac) { ads_setup_micboost(ac); ads_setup_micsrc(ac); /* this part can use a mic array */ }