# # CDDL HEADER START # # The contents of this file are subject to the terms of the # Common Development and Distribution License (the "License"). # You may not use this file except in compliance with the License. # # You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE # or http://www.opensolaris.org/os/licensing. # See the License for the specific language governing permissions # and limitations under the License. # # When distributing Covered Code, include this CDDL HEADER in each # file and include the License file at usr/src/OPENSOLARIS.LICENSE. # If applicable, add the following below this CDDL HEADER, with the # fields enclosed by brackets "[]" replaced with your own identifying # information: Portions Copyright [yyyy] [name of copyright owner] # # CDDL HEADER END # # Copyright (c) 1984, 1986, 1987, 1988, 1989 AT&T # All Rights Reserved # # Copyright 2007 Sun Microsystems, Inc. All rights reserved. # Use is subject to license terms. # #pragma ident "%Z%%M% %I% %E% SMI" /* SVr4.0 1.15 */ # # PC - Personal Computers and Workstations emulating terminals. # # Manufacturer: PERSONAL COMPUTER TERMINALS # Class: III # # Info: # This category is strange. The typical personal computer offers # a program to emulate a "terminal" without documenting any # escape sequences. # # I don't have any direct personal experience with these, but # my impression is that the terminal emulator emulates an # ultra-dumb terminal, with the cursor cemented to the bottom # line, and no escape sequences. # # Many of the entries below were found in random places with # no indication of who they came from or how. In many cases, I # believe what has happened is that someone wrote their own # terminal emulator program, which understood some control # characters or escape sequences, and made their own entries. # # GENERIC PERSONAL COMPUTER # pc|any personal computer emulating a terminal, am, cols#40, bel=^G, cr=\r, cud1=\n, ind=\n, apple-soroc|apple emulating soroc 120, am, cols#80, lines#24, bel=^G, clear=\E*$<300>, cr=\r, cub1=\b, cud1=\n, cuf1=\f, cup=\E=%p1%'\s'%+%c%p2%'\s'%+%c, cuu1=^K, ed=\EY, el=\ET, home=^^, ind=\n, kcub1=\b, kcud1=\n, kcuf1=\f, kcuu1=^K, # Info: # For those of you with either Programma's Pie or Hayden's Pie, # I'm including a patch for DOS which allows them to function # interactively as a terminal, with data transfer. # # The following termcap entry works only with an Apple ][+ that is # equipped with a Videx 80 collumn card in slot 3. A special # routine must be installed at the apple end to enable scroll # down, here indicated with a ^U. The Videx card must have # inverse char set. # apple|apple-v80|Apple][+ w/Videx80 & custom scroll down, cr=^M, cud1=^J, ind=^J, bel=^G, cols#80, lines#24, cub1=^H$<10>, smacs=^z2, rmacs=^z3, cup=\015\036%r%p1%' '%+%c%p2%' '%+%c$<6>, el=\035$<6>, home=\031$<50>, smso=^z3, rmso=^z2, cuf1=\034, cud1=\012, cuu1=\037, clear=\014$<40*>, xenl, am, ri=\020, ed=\013$<20*>, # Info: # -------------------------------------------------------------- # # Pieterm is written using Lisa 2.5. If any of the opcodes used # are confusing, refer to hex values in the left most column. # # # 1 TTL "PIETERM 1.0 # 2 NLS # 3 ; # 4 ; PIETERM: A program which patches 48k DOS 3.3 to allow # 5 ; Programma Pie, and Hayden Pie to function in # 6 ; a terminal mode. # 7 ; # 8 ; ASSUMES: Videx 80 collumn Videoterm in slot 3. # 9 ; 1200 baud Serial Card in slot 2. # 10 ; DOS 3.3 unmodified at $9D00 (master or slave) # 11 ; # 12 ; TO USE: Either from the Command level of Pie, or in a # 13 ; "HELLO" program, "BRUN PIETERM,A$6000". # 14 ; To enter terminal mode, from the Command level # 15 ; of Pie, enter "TERM" or "TERM ". # 16 ; "TERM" Sends a carriage return before entering terminal # 17 ; mode. Best for reentering csh. # 18 ; "TERM " Sends a ^D character before entering # 19 ; terminal mode. For example, "TERM " should be # 20 ; entered if returning to a cat>filename. # 21 ; # 22 ; RETURN: To return to the command level of Pie from the # 23 ; terminal mode, enter "^@". With an upper case # 24 ; locked keyboard, that is control-shift-P. With # 25 ; and Enhanser II lower case keyboard, that is ^0. # 26 ; # 27 ; SENDING: From the Command level of Pie, indicated by # 28 ; "Command:" (csh indicated by %), enter: # 29 ; # 30 ; Command:TERM # 31 ; % stty -echo;cat>filename;stty echo # 32 ; % ^@ # 33 ; Command:>#2 # 34 ; Command:TERM # 35 ; ^__space # 36 ; # 37 ; RECEIVING: % wc filename # 38 ; 46 123 4567 filename # 39 ; % sleep 20;cat filename # 40 ; ^@ # 41 ; Command:(1,46)<#2 # 42 ; # 43 ; BUGS: Extra linefeeds are sent both ways. A filter program # 44 ; at the UN*X end is required to strip every other \n. # 45 ; Arg "^J" Arg "" ^W^X will globally illiminate them # 46 ; within Pie. # 47 ; # 48 ; Since the Patch program overwrites the INIT portion # 49 ; of DOS, it must be brun every boot. A zap utility # 50 ; may be used to modify DOS directly on the disk. # 51 ; # 52 ; Pie gives no indication of what is going on. This # 53 ; takes a little getting used to. It is possible to # 54 ; get so involved with what you are doing in Pie, that # 55 ; you forget you are logged on. # 56 ; # 57 ; Because of the limitation of Pie's buffer, large # 58 ; file need to be transfered in chunks. # 59 ; # 60 ; -------------------------------- # 61 ; # 62 ; # 0800 63 ; # 06F8 64 NO EQU $6F8 ; address specific to videx # 0638 65 START EQU NO-$C0 ; card in slot 3. See # C080 66 DEV0 EQU $C080 ; reference manual. # C081 67 DEV1 EQU $C081 # 03B8 68 BASEL EQU $478-$C0 # CA2E 69 BASCLC1 EQU $CA2E # 0438 70 BASEH EQU $4F8-$C0 # 0800 71 ; # C0AE 72 STATUS EQU $C0AE ; Serial card specific to # C0AF 73 DATAPORT EQU $C0AF ; slot 2. Adjust as needed. # 0800 74 ; # FDED 75 COUT EQU $FDED ; Stdout # 0800 76 ; # A884 77 PUTNAME EQU $A884 ; DOS patch addresses # A909 78 PUTTOKEN EQU $A909 # 9D1E 79 PUTADR EQU $9D1E # AE8E 80 PUTPATCH EQU $AE8E # 0800 81 ; # 6000 82 ORG $6000 # 6000 83 OBJ $800 # 6000 84 ; # 6000 4C 0B 60 85 JMP MAIN # 6003 86 ; # 6003 54 45 52 87 NAME DCI 'TERM' ; hi-bit off except last # 6006 CD # 6007 40 70 88 TOKEN HEX 4070 ; need-filename optional # 6009 8D AE 89 ADRESS ADR PUTPATCH-1 # 600B 90 ; # 600B 91 MAIN: # 600B A2 04 92 LDX 4 # 600D BD 02 60 93 ^1 LDA NAME-1,X # 6010 9D 83 A8 94 STA PUTNAME-1,X # 6013 CA 95 DEX # 6014 D0 F7 96 BNE <1 # 6016 E8 97 INX # 6017 BD 07 60 98 ^2 LDA TOKEN,X # 601A 9D 09 A9 99 STA PUTTOKEN,X # 601D BD 09 60 100 LDA ADRESS,X # 6020 9D 1E 9D 101 STA PUTADR,X # 6023 CA 102 DEX # 6024 10 F1 103 BPL <2 # 6026 A2 73 104 LDX #ENDPATCH-PATCH+1 # 6028 BD 32 60 105 ^3 LDA PATCH,X # 602B 9D 8E AE 106 STA PUTPATCH,X # 602E CA 107 DEX # 602F 10 F7 108 BPL <3 # 6031 60 109 RTS # 6032 110 ; # 6032 111 PATCH: # 6032 112 PHS PUTPATCH # AE8E 113 ; # AE8E A2 8D 114 LDX #$8D # AE90 AD 04 02 115 LDA INBUFF+4 # AE93 C9 A0 116 CMP #" " # AE95 D0 02 117 BNE >0 # AE97 A2 84 118 LDX #$84 # AE99 8A 119 ^0 TXA # AE9A 4C BD AE 120 JMP SENDIT # AE9D AD AE C0 121 RECEIVE LDA STATUS # AEA0 29 01 122 AND #$01 # AEA2 F0 0C 123 BEQ SEND # AEA4 AD AF C0 124 LDA DATAPORT # AEA7 29 7F 125 AND #$7F # AEA9 C9 10 126 CMP #$10 # AEAB F0 1F 127 BEQ SCROLLD # AEAD 20 ED FD 128 PRINTIT JSR COUT # AEB0 AD 00 C0 129 SEND LDA $C000 # AEB3 10 E8 130 BPL RECEIVE # AEB5 8D 10 C0 131 STA $C010 # AEB8 29 7F 132 AND #$7F # AEBA D0 01 133 BNE SENDIT # AEBC 60 134 RTS # AEBD 48 135 SENDIT PHA # AEBE AD AE C0 136 S0 LDA STATUS # AEC1 29 02 137 AND #$02 # AEC3 F0 F9 138 BEQ S0 # AEC5 68 139 PLA # AEC6 8D AF C0 140 STA DATAPORT # AEC9 4C 9D AE 141 JMP RECEIVE # AECC 38 142 SCROLLD SEC # AECD A2 C3 143 LDX #$C3 ; for slot 3 # AECF AC F8 06 144 LDY NO # AED2 BD 38 06 145 LDA START,X # AED5 E9 05 146 SBC #$05 # AED7 29 7F 147 AND #$7F # AED9 9D 38 06 148 STA START,X # AEDC 20 2E CA 149 JSR BASCLC1 # AEDF A9 0D 150 LDA #$0D # AEE1 99 80 C0 151 STA DEV0,Y # AEE4 BD B8 03 152 LDA BASEL,X # AEE7 99 81 C0 153 STA DEV1,Y # AEEA A9 0C 154 LDA #$0C # AEEC 99 80 C0 155 STA DEV0,Y # AEEF BD 38 04 156 LDA BASEH,X # AEF2 99 81 C0 157 STA DEV1,Y # AEF5 A9 19 158 LDA #$19 ; home cursor # AEF7 20 ED FD 159 JSR COUT # AEFA A9 1D 160 LDA #$1D ; ceol # AEFC 20 ED FD 161 JSR COUT # AEFF 4C 9D AE 162 JMP RECEIVE # AF02 163 ; # AF02 164 DPH # 60A6 165 ORG $6000+*-$800 # 60A6 166 OBJ * # 60A6 167 ; # 60A6 168 ENDPATCH: # 60A6 169 END # ATT # # Info: # The official PC terminal emulator program of the AT&T Product # Centers. # # Note - insert mode commented out - doesn't seem to work on # AT&T PC. # simterm|attpc running simterm, am, cols#80, lines#24, bel=^G, clear=\EH\EJ, cr=\r, cub1=\b, cud1=\EB, cuf1=\EC, cup=\E=%p1%' '%+%c%p2%' '%+%c, cuu1=\EA, dch1=\ER, dl1=\EM, ed=\EJ, el=\EK, home=\EH, il1=\EL, ind=\n, rmcup=\EVE, .rmir=\EE, .rmso=\E&d@, smcup=\EVS, smir=\EQ, smso=\E&dB, # Info: # vic20|vic|vic Personal Computer, cr=^M, cud1=^J, ind=^J, bel=^G, am, clear=^K^L, home=^L, lines#20, cuu1=^^, cuf1=^\, cols#22, # Info: # (Dan Ingold) # # Following is a TERMCAP entry for the Datapoint UNITRM18 # asynchronous terminal emulation program. It has only been # tested out at 1200 baud, however, so I don't know if the # delays are correct. # # [what is control "="? keys send different codes from functions? - mrh] # unitrm18|datapoint 'UNITRM18' terminal emulator, cr=^M, ind=^J, cud1=^J, bel=^G, am, cub1=^y, ed=^?, el=^>, clear=^=^?$<12.5>, cols#80, cud1=^k, home=^=, kcuu1=^x, kcud1=^r, kcub1=^t, kcuf1=^v, lines#24, cuf1=^x, cuu1=^z, # Info: # FLORIDA COMPUTER GRAPHICS # Florida Computer Graphics Beacon System, using terminal emulator # program "host.com", as provided by FCG. Entry provided by # David Bryant (cbosg!djb) 1/7/83. # This description is for an early release of the "host" program. # Known bug: ed clears the whole screen, so it's commented out. # beacon|FCG Beacon System, cr=^M, cud1=^J, ind=^J, cols#80, lines#32, clear=\EZ$<10>, cub1=^H, cup=\E=%p1%' '%+%c%p2%' '%+%c$<20>, cuf1=\EV, cuu1=\EU, el=\ET, .ed=\EY, dch1=\EW, ich1=\EQ, dl1=\ER, il1=\EE, smcup=\ESTART^M\E2\0540^M\E12^M\EEND^M$<10>, bel=\ESTART^M\E37^M\EEND^M$<1>, home=\EH$<10>, am, da, db, rev=\ESTART^M\E59\0541^M\EEND^M, smso=\ESTART^M\E70\0546^M\EEND^M$<20>, rmso=\ESTART^M\E70\0540^M\EEND^M$<20>, smul=\ESTART^M\E60\0541^M\EEND^M, rmul=\ESTART^M\E60\0540^M\EEND^M, blink=\ESTART^M\E61\0541^M\EEND^M, sgr0=\ESTART^M\E78^M\E70\0540^M\EEND^M$<20>, # Info: # This doesn't work because the cursor position isn't saved # with the window. # beacon-s|FCG Beacon System with status line, lines#31, eslok, hs, tsl=\ESTART^M\E45\0541^M\E41\054%p1%d\0541^M\EEND^M$<10>, fsl=\ESTART^M\E45\0540^M\EEND^M$<10>, is2=\ESTART^M\E45\0540^M\E65\05431^M\E66\05445^M\E45\0541^M\E65\0541^M\E66\0541^M\E45\0540^M\EEND^M$<30>, use=beacon, # Info: # Here is the xtalk termcap. I mostly use the terminfo (curses) # version myself since I am working at BTL where they have a # certain bias. I am sending the terminfo version too, so that # you can compare them if there are any undiscovered glitches # in the termcap version due to insufficient testing. # # First the termcap version -- # # d0|vt100|vt100-am|vt100|dec vt100:\ # :cr=^M:do=^J:nl=^J:bl=^G:co#80:li#24:cl=50\E[;H\E[2J:\ # :le=^H:bs:am:cm=5\E[i2252;787036H:nd=2\E[C:up=2\E[A:\ # :ce=3\E[K:cd=50\E[J:so=2\E[7m:se=2\E[m:us=2\E[4m:ue=2\E[m:\ # :md=2\E[1m:mr=2\E[7m:mb=2\E[5m:me=2\E[m:is=\E[1;24r\E[24;1H:\ # :rs=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h:ks=\E[?1h\E=:ke=\E[?1l\E>:\ # :rf=/usr/share/lib/tabset/vt100:ku=\EOA:kd=\EOB:kr=\EOC:kl=\EOD:kb=^H:\ # :ho=\E[H:k1=\EOP:k2=\EOQ:k3=\EOR:k4=\EOS:ta=^I:pt:sr=5\EM:vt#3:xn:\ # :sc=\E7:rc=\E8:cs=\E[i2252;787036r: # d1|xtalk|IBM PC with xtalk:\ # :sc@:rc@:cs@:am@:xn@:al=99\E[L:dl=99\E[M:tc=vt100-am: # # The problem is in the "xtalk" entry. The "am" auto-margin # flag should not be turned off as shown above. The following # is the corrected "xtalk" entry. # # d1|xtalk|IBM PC with xtalk:\ # :sc@:rc@:cs@:xn@:al=99\E[L:dl=99\E[M:tc=vt100-am: # # This is the shell script that I execute from my profile when I # login from xtalk -- # # # set auto margins # echo '\033[?7h\c' # #set up tab stops # stty -tabs # echo '\033[3g' # for i in 1 2 3 4 5 6 7 8 9 # do # echo ' \033H\c' # done # stty tabs # echo # # # Now the terminfo version (This is the input to the 'tic' # compiler) -- # # Vanilla vt100 definitions. # vt100|vt100-am|dec vt100, # cr=^M, cud1=^J, ind=^J, bel=^G, cols#80, lines#24, it#8, # clear=\E[H\E[2J$<50>, cub1=^H, am, cup=\E[ip12252;p2787036H$<5>, # cuf1=\E[C$<2>, cuu1=\E[A$<2>, el=\E[K$<3>, ed=\E[J$<50>, # cud=\E[p12252B, cuu=\E[p1787036A, cub=\E[p1787088D, cuf=\E[p1787036C, # smso=\E[7m$<2>, rmso=\E[m$<2>, smul=\E[4m$<2>, rmul=\E[m$<2>, # bold=\E[1m$<2>, rev=\E[7m$<2>, blink=\E[5m$<2>, sgr0=\E[m$<2>, # sgr=\E[?p1t;7;?p2t;4;?p3t;7;?p4t;5;?p6t;1;m, # rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, smkx=\E[?1h\E=, rmkx=\E[?1l\E>, # tbc=\E[3g, hts=\EH, home=\E[H, # kcuu1=\EOA, kcud1=\EOB, kcuf1=\EOC, kcub1=\EOD, kbs=^H, # kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, ht=^I, ri=\EM$<5>, # vt#3, xenl, xon, sc=\E7, rc=\E8, csr=\E[ip12252;p2787036r, # # # ibm xtalk terminal simulator -- similar to but dumber than # vanilla vt100 # Enjoy! # Rick Thomas # ihnp4!btlunix!rbt # (201)-522-6062 # # PS -- I just got word that there is a new revision of xtalk # (3.5 I think they said) that is supposed to fix the vt100 # emulation problems. # xtalk|IBM PC with xtalk communication program, am, mir, msgr, xon, cols#80, it#8, lines#24, vt#3, xmc#1, acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, bel=^G, clear=\E[H\E[J$<50>, cr=\r, cub=\E[%p1%dD, cub1=\b, cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C$<2>, cup=\E[%i%p1%d;%p2%dH$<5>, cuu=\E[%p1%dA, cuu1=\E[A$<2>, dl1=\E[M$<99>, ed=\E[J$<50>, el=\E[K$<3>, el1=\E[1K$<3>, enacs=\E(B\E)0, home=\E[H, ht=\t, hts=\EH, il1=\E[L$<99>, ind=\n, ka1=\EOq, ka3=\EOs, kb2=\EOr, kbs=\b, kc1=\EOp, kc3=\EOn, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kent=\EOM, kf0=\EOy, kf1=\EOP, kf10=\EOx, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf5=\EOt, kf6=\EOu, kf7=\EOv, kf8=\EOl, kf9=\EOw, ri=\EM$<5>, rmacs=^O, rmkx=\E[?1l\E>, rmso=\E[m\s, rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, smacs=^N, smkx=\E[?1h\E=, smso=\E[7m\s, tbc=\E[3g, # # Info: # \EI gets you out of inverse video mode. # # Info: # IBM # Thu May 5 19:35:27 1983 # ibmpc|ibm-pc|ibm5051|5051|IBM Personal Computer, cud1=^J, ind=^J$<10>, bel=^G, smir=\200R, am, cub1=^], kcud1=^_, clear=^L^K, cr=^M^^, home=^K, lines#24, cuu1=^^, cuf1=^\, cols#80, # Info: # According to the Coherent 2.3 manual, the PC console is similar # to a z19. The differences seem to be (1) 25 lines, (2) no status # line, (3) standout is broken, (4) ins/del line is broken, (5) # has blinking and bold. # pc-coherent|pcz19|coherent|IBM PC console running Coherent, cr=^M, cud1=^J, ind=^J, bel=^G, .il1=\EL$<1*>, am, cub1=^H, ed=\EJ, el=\EK, clear=\EE, cup=\EY%p1%' '%+%c%p2%' '%+%c, cols#80, dch1=\EN, .dl1=\EM$<1*>, cud1=\EB, rmir=\EO, home=\EH, smir=\E@, lines#25, mir, cuf1=\EC, ht=^I, it#8, ri=\EI, rmso=\Eq, smso=\Ep, cuu1=\EA, kbs=^h, kcuu1=\EA, kcud1=\EB, kcub1=\ED, kcuf1=\EC, khome=\EH, # Info: # According to the Venix 1.1 manual, the PC console is similar # to a DEC vt52. Differences seem to be (1) arrow keys send # different strings, (2) enhanced standout, (3) added # insert/delete line. # # Note in particular that it doesn't have automatic margins (ick). # There are other keys (f1-f10, pgup, pgdn, backtab, insch,delch) # which I don't have time to add now. # pc-venix|venix|IBM PC console running Venix, cr=^M, cud1=^J, ind=^J, bel=^G, cub1=^H, ed=\EJ, el=\EK, clear=\EH\EJ, cup=\EY%p1%' '%+%c%p2%' '%+%c, cols#80, lines#25, cuf1=\EC, ht=^I, it#8, ri=\EI, cuu1=\EA, kcuu1=\EH, kcud1=\EP, kcuf1=\EM, kcub1=\EK, kbs=^H, il1=\EL, dl1=\EM, khome=\EG, ibm|ibm3101|3101|i3101|IBM 3101-10, am, cols#80, lines#24, bel=^G, clear=\EK, cr=\r, cub1=\b, cud1=\n, cuf1=\EC, cup=\EY%p1%'\s'%+%c%p2%'\s'%+%c, cuu1=\EA, ed=\EJ, el=\EI, home=\EH, ht=\t, hts=\E0, tbc=\EH, ind=\n, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, ibm-system1|system1|ibm system/1 computer, ind=^J, bel=^G, xt, am, cub1=^H, cup=^E%p1%' '%+%c%p2%' '%+%c, clear=^Z, cols#80, home=^K, lines#24, cuf1=^\, cuu1=^^, megatek|Pegasus Work Station Terminal Emulator, cols#83, lines#60, os, am, # Info: # sol and Microkit are for Corey - 6/11/82 - NS # microkit|mkt|microkit terminal computer, cr=^M, ind=^J, cud1=^J, bel=^G, il1=\El, am, cub1=^H, ed=\Ej, el=\Ek, clear=\Ee, cup=\Ey%p1%' '%+%c%p2%' '%+%c, cols#40, dch1=\En, dl1=\Em, rmir=\Eo, home=\Eh, smir=\E@, lines#23, mir, cuf1=\Ec, cuu1=\Ea, ht=^I, cvvis=^N^Lzv, cnorm=\Ex, kcuu1=\Eu, kcud1=\Ed, kcub1=\El, kcuf1=\Er, khome=\Eh, xenl, # Info: # OSBORNE # Thu Jul 7 03:55:16 1983 # # As an aside, be careful; it may sound like an anomaly on the # Osborne, but with the 80-column upgrade, it's too easy to # enter lines >80 columns! # # I've already had several comments... # The Osborne-1 with the 80-col option is capable of being # 52,80, or 104 characters wide; default to 80 for compatibility # with most systems. # # The tab is destructive on the Ozzie; make sure to 'stty -tabs'. # ozzie|osborne|osborne1|osborne 1, cr=^M, cud1=^J, ind=^J, bel=^G, il1=\EE, cub1=^H, el=\ET, cup=\E=%p1%' '%+%c%p2%' '%+%c, clear=^Z, cols#104, dch1=\EW, dl1=\ER, kcuu1=^K, kcud1=^J, kcub1=^H, kcuf1=^L, cud1=^J, cuf1=^L, ich1=\EQ, lines#24, cuu1=^K, msgr, smso=\E), rmso=\E(, ul, smul=\El, rmul=\Em, xt, # Info: # SOL # I don't know which, if either, of these sol's to believe. # ^S is an arrow key! # sol|sol1|, cr=^M, cud1=^J, ind=^J, bel=^G, am, cub1=^H, cup=\E^1%p1%c\E^2%p2%c, clear=^K, home=^N, cols#64, lines#16, cuf1=^S, cuu1=^W, kcub1=^A, kcuf1=^S, kcuu1=^W, kcud1=^Z, # Info: # sol and Microkit are for Corey - 6/11/82 - NS # sol2|sol terminal computer, cr=^M, ind=^J$<20>, cud1=^J, bel=^G, il1=20\EL, am, cub1=^H, ed=20\EJ, el=\EK, clear=20\EE, cup=\EY%p1%' '%+%c%p2%' '%+%c, cols#64, dch1=\EN, dl1=20\EM, rmir=\EO, home=\EH, smir=\E@, lines#16, mir, cuf1=\EC, cuu1=\EA, ht=^I, cvvis=^N^Lv, cnorm=\EX, kcuu1=\EU, kcud1=\ED, kcub1=\EL, kcuf1=\ER, khome=\EH, xenl, # Info: # SUN # smcup/rmcup control # lines scrolled on linefeed. The sun 2 # seems to handle this well with it set to 1, so both force this. # rmcup could use 0 or 3 just as well, I suppose. # sun|sun1|sun2|Sun Microsystems Inc. workstation, cr=^M, cud1=^J, ind=^J, bel=^G, am, km, cub1=^H, clear=^L, lines#34, cols#80, cup=\E[%i%p1%d;%p2%dH, cuf1=\E[C, cuu1=\E[A, el=\E[K, ed=\E[J, il=\E[%p1%dL, dl=\E[%p1%dM, ich=\E[%p1%d@, dch=\E[%p1%dP, kcub1=\E[D, kcud1=\E[B, kcuu1=\E[A, kcuf1=\E[C, kf1=\E[224z, kf2=\E[225z, kf3=\E[226z, kf4=\E[227z, kf5=\E[228z, kf6=\E[229z, kf7=\E[230z, kf8=\E[231z, kf9=\E[232z, ht=^I, il1=\E[L, dl1=\E[M, rs2=\E[s, smso=\E[7m, rmso=\E[m, smul=\E[4m, rmul=\E[m, bold=\E[1m, rev=\E[7m, sgr0=\E[m, sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;m, msgr, ich1=\E[@, dch1=\E[P, home=\E[H, sun-s|Sun Microsystems Workstation window with status line, hs, tsl=\E]l, fsl=\E\\, dsl=\E]l\E\\, use=sun, sun-e-s|sun-s-e|Sun Microsystems Workstation with status hacked for emacs, hs, tsl=\E]l, fsl=\E\\, dsl=\E]l\E\\, use=sun-e, sun-48|Sun 48-line window, lines#48, cols#80, use=sun, sun-34|Sun 34-line window, lines#34, cols#80, use=sun, sun-24|Sun 24-line window, lines#24, cols#80, use=sun, sun-17|Sun 17-line window, lines#17, cols#80, use=sun, sun-12|Sun 12-line window, lines#12, cols#80, use=sun, sun-1|Sun 1-line window for sysline, lines#1, cols#80, eslok, hs, tsl=\r, fsl=\E[K, dsl=^L, use=sun, # emacs runs faster without insert character sun-nic|sune|sun-e|Sun Microsystems Workstation console without insert character, ich1@, use=sun, sun-cmd|Sun Microsystems Workstation console with scrollable history, rmcup=\E[>4h, smcup=\E[>4l, use=sun, sun-na|Sun Microsystems Workstation console with no arrow keys, kcuu1@, kcud1@, kcub1@, kcuf1@, use=sun, sun-color|Sun Workstation console with color text support, colors#8, ncv#3, pairs#64, op=\E[0m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm, setb=\E[4%?%p1%{1}%=%t4 %e%p1%{3}%=%t6 %e%p1%{4}%=%t1 %e%p1%{6}%=%t3 %e%p1%d%;m, setf=\E[3%?%p1%{1}%=%t4 %e%p1%{3}%=%t6 %e%p1%{4}%=%t1 %e%p1%{6}%=%t3 %e%p1%d%;m, use=sun, # Info: # X # Latest and greatest "xterm" entry from X11R5 # xterm|vs100|xterm terminal emulator, ind=^J, cols#80, lines#65, clear=\E[H\E[2J, cub1=^H, am, cup=\E[%i%p1%d;%p2%dH, cuf1=\E[C, cuu1=\E[A, el=\E[K, ed=\E[J, cud=\E[%p1%dB, cuu=\E[%p1%dA, cub=\E[%p1%dD, cuf=\E[%p1%dC, km, smso=\E[7m, rmso=\E[m, smul=\E[4m, rmul=\E[m, bold=\E[1m, rev=\E[7m, blink=\E[5m, sgr0=\E[m, rs1=\E>\E[1;3;4;5;6l\E[?7h\E[m\E[r\E[2J\E[H, rs2=@, kf1=\E[11~, kf2=\E[12~, kf3=\E[13~, kf4=\E[14~, kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, kf0=\E[21~, ht=^I, ri=\EM, vt@, xon@, csr=\E[%i%p1%d;%p2%dr, il=\E[%p1%dL, dl=\E[%p1%dM, il1=\E[L, dl1=\E[M, ich=\E[%p1%d@, dch=\E[%p1%dP, ich1=\E[@, dch1=\E[P, rmcup=\E[2J\E[?47l\E8, smcup=\E7\E[?47h, use=vt100-am, xterms|vs100s|xterm terminal emulator (small screen 24x80), cols#80, lines#24, use=xterm, xpcterm|X PC-compatible terminal, am, xon, cols#80, lines#25, colors#8, pairs#64, ncv#3, cbt=^], bel=^G, cr=^M, clear=\e[2J\e[H, el=\e[K, ed=\e[J, cup=\e[%i%p1%d;%p2%dH, cud1=\e[B, home=\e[H, cub1=\e[D, cuf1=\e[C, cuu1=\e[A, dch1=\e[P, dl1=\e[M, smacs=\e[12m, blink=\e[5m, bold=\e[1m, invis=\e[8m, rev=\e[7m, smso=\e[7m, smul=\e[4m, rmacs=\e[10m, sgr0=\e[0;10m, rmso=\e[m, rmul=\e[m, is2=\e[0;10;39m, ich1=\e[@, il1=\e[L, kbs=^H, kdch1=\177, kcud1=\e[B, kf1=\eOP, kf2=\eOQ, kf3=\eOR, kf4=\eOS, kf5=\eOT, kf6=\eOU, kf7=\eOV, kf8=\eOW, kf9=\eOX, kf10=\eOY, khome=\e[H, kich1=\e[@, kcub1=\e[D, knp=\e[U, kpp=\e[V, kcuf1=\e[C, kcuu1=\e[A, dch=\e[%p1%dP, dl=\e[%p1%dM, cud=\e[%p1%dB, ich=\e[%p1%d@, indn=\e[%p1%dS, il=\e[%p1%dL, cub=\e[%p1%dD, cuf=\e[%p1%dC, rin=\e[%p1%dT, cuu=\e[%p1%dA, ind=\e[S, ri=\e[T, sgr=\e[0%?%p1%p3%|%t;7%;%?%p2%t;4%;%?%p4%t;5%;%?%p6%t;1%;%?%p7%t;8%;%?%p9%t;12%e;10%;m, ht=^I, acsc=``a1fxgqh0jYk?lZm@nEooppqDrrsstCu4vAwBx3yyzz{{||}}~~, kcbt=^], kend=\e[Y, kf11=\eOZ, kf12=\eOA, op=\e[0m, setf=\e[%?%p1%{0}%=%t30m%e%p1%{1}%=%t34m%e%p1%{2}%=%t32m%e%p1%{3}%=%t36m%e%p1%{4}%=%t31m%e%p1%{5}%=%t35m%e%p1%{6}%=%t33m%e%p1%{6}%=%t33m%e%p1%{7}%=%t37m%;, setb=\e[%?%p1%{0}%=%t40m%e%p1%{1}%=%t44m%e%p1%{2}%=%t42m%e%p1%{3}%=%t46m%e%p1%{4}%=%t41m%e%p1%{5}%=%t45m%e%p1%{6}%=%t43m%e%p1%{7}%=%t47m%;, xpcterms|X PC-compatible terminal (small) (X Window System), lines#25, use=xpcterm, terak|Terak emulating Datamedia 1520, am, xenl, cols#80, lines#24, bel=^G, clear=\f, cr=\r, cub1=\b, cud1=\n, cuf1=^\, cup=^^%p2%'\s'%+%c%p1%'\s'%+%c, cuu1=^_, ed=^K, el=^], home=^Y, ht=\t, ind=\n, kcub1=\b, kcud1=\n, kcuf1=^\, kcuu1=^_, khome=^Y, trs80|trs-80|trs80-1|Radio Shack TRS-80 model I, cr=^M, cud1=^J, ind=^J, bel=^G, am, cub1=^H, cols#64, lines#16, # Info: # trs16|trs80-16|trs-80 model 16 console, cr=^M, cud1=^J, ind=^J, bel=^G, il1=\EL, am, cub1=^H, ed=\EJ, el=\EK, clear=^L, cup=\EY%p1%' '%+%c%p2%' '%+%c, cuu1=\EA, cols#80, dch1=\EQ, dl1=\EM, cud1=\EB, ich1=\EP, home=\EH, kbs=^H, kcud1=\EB, kcub1=\ED, kcuf1=\EC, kcuu1=\EA, kf0=^A, kf1=^B, lines#24, cuf1=\EC, ht=^I, rmso=\ER@, xmc#0, smso=\ERD, kf2=^D, kf3=^L, kf4=^U, kf5=^P, kf6=^N, kf7=^S, # Info: # Radio Shack model 100 running standard TELCOM Rom program # hacking by Yerazuws@RPI, Bownesrm@RPI 1/8/84 # tested at 300 baud (foneline), remember to set the 100's RS-232 # to ignore parity (eg. config to 37I1N) if you want to # run Emacs (which this termcap description will, quite nicely!) # # From: jgc@sunrise.UUCP Mon, 11-Jul-83 17:33:49 EDT # esc A - cursor up # esc B - cursor down # esc C - cursor right # esc D - cursor left # esc E - clear screen and home cursor # esc H - home cursor # esc J - erase to end of screen # esc K - erase to end of line # esc L - insert line # esc M - delete line # esc P - turn on cursor # esc Q - turn off cursor # esc T - sets system line (?) # esc U - resets system line (?) # esc V - turn off LCD (?) # esc W - turn on LCD (?) # esc Y row column - cursor motion (:cm=\EY%+ %+ :) # esc j - clear screen, don't move cursor # esc l - erase line, don't move cursor # esc p - begin reverse video # esc q - end reverse video # esc del - change char under cursor to space # trs80-100|trs100|trs-100|MZ|m-100|m100| Radio Shack Model 100, cr=^M, cud1=^J, ind=^J, bel=^G, ed=\EJ, el=\EK, cub1=^H, am, dl1=\EM$<5>, il1=\EL$<7>, cuu1=\EA, cuf1=\EC, cup=\EY%p1%'\s'%+%c%p2%'\s'%+%c, lines#8, cols#40, smso=\Ep, rmso=\Eq, kcuu1=^^, kcud1=^_, kcub1=^], kcuf1=^\, kbs=^H, home=\EH, clear=\EE, civis=\EQ, cnorm=\EP, trs2|trsII|trs80II|Radio Shack Model II using P&T CP/M, am, msgr, cols#80, lines#24, bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^_, cuf1=^], cup=\EY%p1%'\s'%+%c%p2%'\s'%+%c, dl1=^K, ed=^B, el=^A, home=^F, ht=^I, il1=^D, ind=^_, kbs=^H, kcub1=^\, kcud1=^_, kcuf1=^], kcuu1=^^, rmso=^O, smso=^N, # XEROX x820|820|820-2|Xerox 820, cr=^M, cud1=^J, ind=^J, bel=^G, am, cub1=^H, cup=\E=%p1%' '%+%c%p2%' '%+%c, clear=1^Z, ed=^Q, el=^X, cols#80, home=^^, lines#24, cuf1=^L, cuu1=^K, # COLOR EMULATORS gs6300|emots|AT&T PC6300 with EMOTS Terminal Emulator, # background color erase am, msgr, xon, bce, cols#80, it#8, lines#24, colors#8, pairs#64, acsc=\,\,..--++``aaffgghhiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[J, cr=\r, cub=\E[%p1%dD, cub1=\b, cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, .el1=\E[1K, home=\E[H, ht=\t, ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=\n, is2=\E[0m, kbs=\b, kcbt=^R\t, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf1=\E[0s, kf2=\E[24s, kf3=\E[1s, kf4=\E[23s, kf5=\E[2s, kf6=\E[22s, kf7=\E[3s, kf8=\E[21s, khome=\E[H, mc4=\E[4i, mc5=\E[5i, rev=\E[7m, ri=\E[L, rmacs=\E[10m, rmln=\E|, rs1=\Ec, sgr0=\E[m\E[10m, smacs=\E[11m, smso=\E[1m, smul=\E[4m, # color information. blue foreground is simulated with cyan op=\E[?;m, setf=\E[?%?%p1%{0}%=%t0 %e%p1%{1}%=%t2 %e%p1%{1}%-%d%;m, setb=\E[?;%p1%dm, pc52|dec vt52 for PC, # background color erase am, msgr, bce, cols#80, it#8, lines#25, # bold means: white on black bold, so it not allowed with colors # rev meand: black on white, also not allowed # smso and dim are simulated with colors, ditto # smul is allowed, even though it always means white foreground: # it is too important. colors#8, pairs#64, ncv#53, bel=^G, blink=\Eo, bold=\Ebo\Ec0, clear=\EH\EJ, cr=\r, cub1=\b, cud1=\n, cuf1=\EC, cup=\EY%p1%'\s'%+%c%p2%'\s'%+%c, cuu1=\EA, dim=\Eb3\Ec0, dl1=\EM, ed=\EJ, el=\EK, ht=\t, il1=\EL, ind=\n, kbs=\b, kcub1=\EL, kcud1=\ED, kcuf1=\ER, kcuu1=\EU, kf1=\Ea, kf10=\Ej, kf2=\Eb, kf3=\Ec, kf4=\Ed, kf5=\Ee, kf6=\Ef, kf7=\Eg, kf8=\Eh, kf9=\Ei, rev=\Ep, ri=\EI, rmso=\Eb7\Ec0, sgr0=\Eb7\Ec0\Et, smso=\Eb6\Ec4, smul=\Es, # color information. blue foreground is simulated with cyan op=\Eb7\Ec0, setf=\Eb%?%p1%{1}%=%t3 %e%p1%d%;, setb=\Ec%p1%d, # CTRM terminal emulator ctrm|C terminal emulator, am, xon, # back_color_erase # underlining is not allowed with colors: first, is is simulated by # black on white, second, it disables background color manipulations. bce, cols#80, lh#0, lines#24, lm#0, lw#0, nlab#0, colors#8, pairs#64, pb#19200, vt#6, ncv#2, bel=^G, cbt=\Ei, clear=\EH\EJ, cr=\r, cub1=\b, cud1=\n, cuf1=\EC, cup=\E&a%p2%dc%p1%dY, cuu1=\EA, dch1=\EP$<2>, dl1=\EM, ed=\EJ, el=\EK, hpa=\E&a%p1%dC, ht=\t$<2>, hts=\E1, il1=\EL, ind=\n, ip=$<2>, is2=\E&jA\r, kbs=\b, kcub1=\Eu\r, kcud1=\Ew\r, kcuf1=\Ev\r, kcuu1=\Et\r, kf1=\Ep\r, kf2=\Eq\r, kf3=\Er\r, kf4=\Es\r, kf5=\Et\r, kf6=\Eu\r, kf7=\Ev\r, kf8=\Ew\r, khome=\Ep\r, rmir=\ER, rmkx=\E&jA, smir=\EQ, smkx=\E&jB, smso=\E&dD, smul=\E&dD, tbc=\E3, vpa=\E&a%p1%dY, # BLINKING, REVERSE and BOLD are allowed with colors, # so we have to save their status in the static registers A, B and H # respectively, to be able to restore them when color changes # (because any color change turns off ALL attributes) blink=\E&dA%{1}%PA, # "enter_bold_mode" and "enter_reverse_mode" sequences alternates modes, # rather then simply entering them. Thus we have to check the # static register B and H to determine the status, before sending the # escape sequence. rev=%?%gB%{0}%=%t\E&dB%{1}%PB%;, bold=%?%gH%{0}%=%t\E&dH%{1}%PH%;, smul=\E&dD, # sgr0 now must set the status of all 3 register (A,B,H) to zero # and then reset colors sgr0=\E&d@%{0}%PA%{0}%PB%{0}%PH, # implementation of the protect mode would badly penalize the performance. # we would have to use \E&bn sequence to turn off colors (as well as all # other attributes), and keep the status of protect mode in yet another # static variable. If someone really need this mode, they would have to # create another terminfo entry. sgr=\E&d@%{0}%PA%{0}%PB%{0}%PD%{0}%PH %?%p1%p3%p5%|%|%t\E&dB%{1}%PB%; %?%p4%t\E&dA%{1}%PA%; %?%p6%t\E&dH%{1}%PH%; %?%p2%t\E&dD%;, # original color-pair: white on black. # store the information about colors into static registers op=\E&bn\E&bB\E&bG\E&bR %{0}%PX%{0}%PY%{0}%PZ %{1}%PW%{1}%PV%{1}%PU, # set foreground color. it performs the following steps. # 1) turn off all attributes # 2) turn on the background and video attribues that have been turned # on before (this information is stored in static registers X,Y,Z,A,B,H,D). # 3) turn on foreground attributes # 4) store information about foreground into U,V,W static registers setf=\E&bn %?%gA%t\E&dA%; %?%gB%t\E&dB%; %?%gH%t\E&dH%; %?%gX%t\E&br%; %?%gY%t\E&bg%; %?%gZ%t\E&bb%; %?%p1%{1}%&%t\E&bB%{1}%e%{0}%;%PW %?%p1%{2}%&%t\E&bG%{1}%e%{0}%;%PV %?%p1%{4}%&%t\E&bR%{1}%e%{0}%;%PU, # turn on background: similar to turn on foreground above setb=\E&bn %?%gA%t\E&dA%; %?%gB%t\E&dB%; %?%gH%t\E&dH%; %?%gU%t\E&bR%; %?%gV%t\E&bG%; %?%gW%t\E&bB%; %?%p1%{1}%&%t\E&bb%{1}%e%{0}%;%PZ %?%p1%{2}%&%t\E&bg%{1}%e%{0}%;%PY %?%p1%{4}%&%t\E&br%{1}%e%{0}%;%PX, # Info: # CDE's dtterm terminal emulator entry from Martin Knutson # dtterm|CDE terminal emulator, acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, am, bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l, clear=\E[H\E[J, cnorm=\E[?25h, colors#8, cols#80, cr=\r, csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=\b, cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m, dl=\E[%p1%dM, dl1=\E[M, ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K, flash=\E[?5h$<200>\E[?5l, home=\E[H, ht=\t, hts=\EH, ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L, ind=\ED, invis=\E[8m, is2=\E\sF\E>\E[?1l\E[?7h\E[?45l, it#8, kbs=\b, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~, kf1=\E[11~, kf2=\E[12~, kf3=\E[13~, kf4=\E[14~, kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, kf15=\E[28~, kf16=\E[29~, kf17=\E[31~, kf18=\E[32~, kf19=\E[33~, kf20=\E[34~, kfnd=\E[1~, khlp=\E[28~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~, kslt=\E[4~, lines#24, lm#0, mir, msgr, nel=\EE, op=\E[39;49m, pairs#8, rc=\E8, rev=\E[7m, ri=\EM, rmacs=^O, rmam=\E[?7l, rmir=\E[4l, rmso=\E[22;27m, rmul=\E[24m, sc=\E7, setab=\E[%p1%{40}%+%dm, setaf=\E[%p1%{30}%+%dm, sgr=\E[0%?%p1%t;2;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p5%t;2%;%?%p6%t;1%;%?%p7%t;8%;m%?%p9%t^N%e^O%;, sgr0=\E[0m, smacs=^N, smam=\E[?7h, smir=\E[4h, smso=\E[2;7m, smul=\E[4m, tbc=\E[3g, xenl, xon,