#
# CDDL HEADER START
#
# The contents of this file are subject to the terms of the
# Common Development and Distribution License, Version 1.0 only
# (the "License").  You may not use this file except in compliance
# with the License.
#
# You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE
# or http://www.opensolaris.org/os/licensing.
# See the License for the specific language governing permissions
# and limitations under the License.
#
# When distributing Covered Code, include this CDDL HEADER in each
# file and include the License file at usr/src/OPENSOLARIS.LICENSE.
# If applicable, add the following below this CDDL HEADER, with the
# fields enclosed by brackets "[]" replaced with your own identifying
# information: Portions Copyright [yyyy] [name of copyright owner]
#
# CDDL HEADER END
#
#	Copyright (c) 1984, 1986, 1987, 1988, 1989 AT&T
#	  All Rights Reserved


#ident	"%Z%%M%	%I%	%E% SMI"	/* SVr4.0 1.6	*/
# # --------------------------------
#
# heath: HEATHKIT and ZENITH
#
# Manufacturer:	HEATHKIT and ZENITH
# Class:	I
h19-a|heath-ansi|heathkit-a|heathkit h19 ansi mode,
	cr=^M, cud1=^J, ind=^J, bel=^G, il1=\E[1L$<1*>, am, cub1=^H, ed=\E[J,
	el=\E[K, clear=\E[2J, cup=\E[%i%p1%d;%p2%dH, cols#80,
	dch1=\E[1P, dl1=\E[1M$<1*>, cud1=\E[1B,
	rmir=\E[4l, home=\E[H, smir=\E[4h, lines#24, mir,
	cuf1=\E[1C, smacs=\E[10m, rmacs=\E[11m, msgr, ht=^I, it#8,
	rmso=\E[0m, smso=\E[7m, cuu1=\E[1A, cvvis=\E[>4h, cnorm=\E[>4l,
	kbs=^h, kcuu1=\E[1A, kcud1=\E[1B, kcub1=\E[1D, kcuf1=\E[1C,
	khome=\E[H,
	kf1=\EOS, kf2=\EOT, kf3=\EOU, kf4=\EOV, kf5=\EOW, lf6=blue,
	lf7=red, lf8=white, kf6=\EOP, kf7=\EOQ, kf8=\EOR,
	ri=\EM, is2=\E<\E[>1;2;3;4;5;6;7;8;9l\E[0m\E[11m\E[?7h,
h19-bs|heathkit w/keypad shifted,
	smkx=\Et, rmkx=\Eu, use=h19-b,
h19-smul|heathkit w/keypad shifted/underscore cursor,
	smkx=\Et, rmkx=\Eu, use=h19-u,
h19|heath|h19-b|heathkit|heath-19|z19|zenith|heathkit h19,
	cr=^M, cud1=^J, ind=^J, bel=^G, il1=\EL$<1*>, am, cub1=^H,
	ed=\EJ, el=\EK, clear=\EE, cup=\EY%p1%' '%+%c%p2%' '%+%c, cols#80,
	dch1=\EN, dl1=\EM$<1*>, cud1=\EB, rmir=\EO, home=\EH, smir=\E@,
	lines#24, mir, cuf1=\EC, smacs=\EF, rmacs=\EG, msgr, ht=^I, it#8,
	ri=\EI, rmso=\Eq, smso=\Ep, cuu1=\EA, cvvis=\Ex4, cnorm=\Ey4,
	kbs=^h, kcuu1=\EA, kcud1=\EB, kcub1=\ED, kcuf1=\EC, khome=\EH,
	kf1=\ES, kf2=\ET, kf3=\EU, kf4=\EV, kf5=\EW,
	lf6=blue, lf7=red, lf8=white, kf6=\EP, kf7=\EQ, kf8=\ER,
	hs, eslok, tsl=\Ej\Ex5\EY8%p1%' '%+%c\Eo\Eo, fsl=\Ek\Ey5,
h19-u|heathkit with underscore cursor,
	cvvis@, cnorm@, use=h19-b,
# Info:
#	This still doesn't work right - something funny is going on 
#	with return # and linefeed in the reach program. Apparently 
#	cr acts like crlf and lf is ignored. There is a "literal end 
#	of line mode" which works right, but this will cause cr's to 
#	appear in files that are spooled. This description assumes 
#	"normal end of line mode".
#
reach|h89|h89 running reach,
	cr@, cud1=\EB, ind=\r\l, is2=\Ey3\Ev, use=h19-b,
alto-h19|altoh19|altoheath|alto-heath|alto emulating heathkit h19,
	lines#60, il1=\EL, dl1=\EM, use=h19,
# Info:
#	The major problem with the Z29 is that it requires more 
#	padding than the Z19. Once again, here's a little termcap 
#	entry for it that will do the trick. 
#	
#	The problem declaring an H19 to be synonomous with a Z29 is that
#	it needs more padding. It especially loses if a program attempts
#	to put the Z29 into insert mode and insert text at 9600 baud. It
#	even loses worse if the program attempts to insert tabs at 9600
#	baud. Adding padding to text that is inserted loses because in 
#	order to make the Z29 not die, one must add so much padding that
#	whenever the program tries to use insert mode, the effective 
#	rate is about 110 baud.
#	
#	What program would want to put the terminal into insert mode 
#	and shove stuff at it at 9600 baud you ask?  
#	
#	Emacs. Emacs seems to want to do the mathematically optimal 
#	thing in doing a redisplay rather than the practical thing.
#	When it is about to output a line on top of a line that is 
#	already on the screen, instead of just killing to the end of 
#	the line and outputing the new line, it compares the old line 
#	and the new line and if there are any similarities, it 
#	constructs the new line by deleting the text on the old line 
#	on the terminal that is already there and then inserting new
#	text into the line to transform it into the new line that is 
#	to be displayed. The Z29 does not act kindly to this.
#	
#	But don't cry for too long.... There is a solution. You can make
#	a termcap entry for the Z29 that says the Z29 has no insert mode.
#	Then Emacs cannot use it. "Oh, no, but now inserting into a 
#	line will be really slow", you say. Well there is a sort of a
#	solution to that too. There is an insert character option on 
#	the Z29 that will insert one character. Unfortunately, it 
#	involves putting the terminal into ansi mode, inserting the 
#	character, and changing it back to H19 mode. All this takes 12 
#	characters. Pretty expensive to insert one character, but it 
#	works. Either Emacs doesn't try to use its inserting hack when 
#	it's only given an insert character ability or the Z29 doesn't 
#	require padding with this (the former is probably more likely, 
#	but I haven't checked it out).
#
z29|zenith29|z29b|,
	cr=^M, cud1=^J, ind=^J, bel=^G, is2=\E<\E[?2h\Ev, il1=\EL$<1>, am,
	cub1=^H, ed=\EJ$<14>, el=\EK$<1>, clear=\EE$<14>,
	cup=\EY%p1%' '%+%c%p2%' '%+%c,
	cols#80, dch1=\EN$<0.1*>, dl1=\EM$<1>, cud1=\EB, home=\EH,
	ich1=\E<\E[1@\E[?2h$<1>, lines#24, cuf1=\EC,
	rmacs=\EF, smacs=\EG, ind=\n$<2>, msgr, ht=^I, ri=\EI$<2>, rmso=\Eq,
	smso=\Ep, cuu1=\E$<1>A, cvvis=\Ex4, cnorm=\Ey4, kbs=^h, kcuu1=\EA,
	kcud1=\EB, kcub1=\ED, kcuf1=\EC, khome=\EH, kf1=\ES,
	kf2=\ET, kf3=\EU, kf4=\EV, kf5=\EW, kf6=\EP, kf7=\EQ, kf8=\ER,
	kf9=\E0I, kf0=\E~, lf0=home,
	cbt=\E-, smul=\Es8, rmul=\Es0,