# # CDDL HEADER START # # The contents of this file are subject to the terms of the # Common Development and Distribution License (the "License"). # You may not use this file except in compliance with the License. # # You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE # or http://www.opensolaris.org/os/licensing. # See the License for the specific language governing permissions # and limitations under the License. # # When distributing Covered Code, include this CDDL HEADER in each # file and include the License file at usr/src/OPENSOLARIS.LICENSE. # If applicable, add the following below this CDDL HEADER, with the # fields enclosed by brackets "[]" replaced with your own identifying # information: Portions Copyright [yyyy] [name of copyright owner] # # CDDL HEADER END # # # Copyright 2007 Sun Microsystems, Inc. All rights reserved. # Use is subject to license terms. # # Copyright (c) 1984, 1986, 1987, 1988, 1989 AT&T # All Rights Reserved #ident "%Z%%M% %I% %E% SMI" # # -------------------------------- # # att: AT&T # # Manufacturer: AT&T # Class: I 2300|att2300|ATT2300|sv80|AT&T 2300 Video Information Terminal 80 column mode @(#)2300.ti 1.1, am, xon, eo, mir, msgr, cols#80, lines#24, it#8, bel=^G, cub=\E[%p1%dD, cub1=\b, cuf=\E[%p1%dC, cuf1=\E[C, cud=\E[%p1%dB, cud1=\n, cuu=\E[%p1%dA, cuu1=\E[A, cup=\E[%i%p1%d;%p2%dH, ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, smso=\E[7m, rmso=\E[0m, rev=\E[7m, cr=\r, ind=\n, ht=\t, smir=\E[4h, rmir=\E[4l, home=\E[H, clear=\E[H\E[J, ed=\E[J, el=\E[K, el1=\E[1K, kf1=\E[1r, kf2=\E[2r, kf3=\E[3r, kf4=\E[4r, kf5=\E[5r, kf6=\E[6r, kf7=\E[7r, kf8=\E[8r, kf9=\E[9r, kf10=\E[10r, kf11=\E[11r, kf12=\E[12r, kf13=\E[13r, kf14=\E[14r, kf15=\E[15r, kf16=\E[16r, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, khome=\E[H, kclr=\E[J, kcbt=\E[Z, kbs=\b, kil1=\E[L, kich1=\E[@, kdl1=\E[M, kdch1=\E[P, mc0=\E[0i, mc4=\E[4i, mc5=\E[5i, sgr0=\E[m, 2350|att2350|ATT2350|AT&T 2350 Video Information Terminal 80 column mode @(#)2300.ti 1.1, mc0@, mc4@, mc5@, use=att2300, 2300-x40|att2300-x40|ATT2300-x40|sv40|AT&T 2300 Video Information Terminal 40 column mode @(#)2300.ti 1.1, cols#40, lines#23, it#5, il@, il1@, use=att2300, 2350-x40|att2350-x40|ATT2350-x40|AT&T 2350 Video Information Terminal 40 column mode @(#)2300.ti 1.1, cols#40, lines#23, it#5, il@, il1@, use=att2350, # # AT&T 386 monocrome console # AT386-M|at386-m|386AT-M|386at-m|at/386 console @(#)386.ti 1.4, am, bw, eo, xon, cols#80, lines#25, bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[2J\E[H, cr=\r, cub=\E[%p1%dD, cub1=\E[D, cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%02d;%p2%02dH, cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[1M, ed=\E[J, el=\E[K, flash=^G, home=\E[H, ht=\t, ich=\E[%p1%d@, ich1=\E[1@, il=\E[%p1%dL, il1=\E[1L, ind=\E[S, indn=\E[%p1%dS, invis=\E[9m, is2=\E[0;10m, kbs=\b, kcbt=^], kclr=\E[2J, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[P, kend=\E[Y, kf1=\EOP, kf10=\EOY, kf11=\EOZ, kf12=\EOA, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf5=\EOT, kf6=\EOU, kf7=\EOV, kf8=\EOW, kf9=\EOX, khome=\E[H, kich1=\E[@, knp=\E[U, kpp=\E[V, krmir=\E0, pfx=\EQ%p1%{1}%-%d'%p2%s', rev=\E[7m, rin=\E[S, rmacs=\E[10m, rmso=\E[m, rmul=\E[m, sgr=\E[10m\E[0%?%p1%p3%|%t;7%;%?%p2%t;4%;%?%p4%t;5%;%?%p6%t;1%;%?%p9%t;12%;%?%p7%t;9%;m, sgr0=\E[0;10m, smacs=\E[12m, smso=\E[7m, smul=\E[4m, # # AT&T 386 color console # AT386|at386|386AT|386at|at/386 console @(#)386.ti 1.4, colors#8, ncv#3, pairs#64, op=\E[0m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm, setb=\E[4%?%p1%{1}%=%t4 %e%p1%{3}%=%t6 %e%p1%{4}%=%t1 %e%p1%{6}%=%t3 %e%p1%d%;m, setf=\E[3%?%p1%{1}%=%t4 %e%p1%{3}%=%t6 %e%p1%{4}%=%t1 %e%p1%{6}%=%t3 %e%p1%d%;m, use=at386-m, AT386-DOS-M|at/386 console for 437 codeset @(#)386.ti 1.4, acsc=``a~ffggjYk?lZm@nEooppqDrrsstCu4vAwBx3yyzz{{||}}~~, use=at386-m, AT386-DOS|at/386 console for 437 codeset @(#)386.ti 1.4, acsc=``a~ffggjYk?lZm@nEooppqDrrsstCu4vAwBx3yyzz{{||}}~~, use=at386, 33|tty33|tty|AT&T model 33 teletype @(#)33.ti 1.1, xon,cr=^M, cud1=^J, ind=^J, bel=^G, cols#72, hc, os, 35|tty35|AT&T model 35 teletype @(#)35.ti 1.1, use=tty33, 37|tty37|AT&T model 37 teletype @(#)37.ti 1.1, xon,cr=^M, cud1=^J, ind=^J, bel=^G, cub1=^H, hc, hu=\E8, hd=\E9, cuu1=\E7, os, # Info: # The Dataspeed 40's print a visible newline indicator after # each newline. The 40-1 is a half duplex terminal. # and is described here. The 40-4 is a 3270 lookalike # # The terminal has blinking standout. It also has visible bell # but I don't know it - it's null here to prevent it from showing # the BL character. # # I am not sure if the 40 has xmc, it looked like it didn't. # # Note also that the control characters have been randomly # rearranged, for example, to get escape you type control-P and # cntrol-H generates GS, group separator! # # # \EX will get terminal out of protect mode but there doesn't # appear to be a mnemonic for it (\EW will put it into protect). # # When printer is enabled all received characters are printed - no # print screen is provided. Most delays are pure guesswork. # # Watch out for the visible newline symbol. Note that # the editing and cursor controls do not work in S/R mode except # for cursor left arrow which generates the backspace character. # # Note also that many control codes echo visibly while the # corresponding escape sequences do not; for example, both ^K # and \EC move the cursor right one place, but the former # prints a VT symbol, too. # 40|tty40|ds40|ds40-2|dataspeed40|teletype dataspeed 40/2 @(#)40.ti 1.1, clear=\EH$<20>\EJ$<80>, ed=\EJ$<75>, il1=\EL$<50>, dl1=\EM$<50>, dch1=\EP$<50>, ich1=\E\^$<50>, cuf1=\EC, cuu1=\E7, cub1=^H, cr=\EG, ind=\ES$<20>, cud1=\EB, cols#80, lines#24, smso=\E3, rmso=\E4, xon,kbs=\035, kcub1=^H, rs2=^S\ER$<60>, hts=\E1, home=\EH$<10>, ri=\ET$<10>, tbc=\EH\E2$<80>, mc5=^R$<2000>, mc4=^T, ht=\E@$<10>, 43|tty43|AT&T model 43 teletype @(#)43.ti 1.1, xon,cr=^M, cud1=^J, ind=^J, bel=^G, kbs=^h, am, cub1=^H, hc, os, cols#132, # Info: # Must setup RETURN KEY - CR, REC'VD LF - INDEX. # Seems upward compatible with vt100, plus ins/del line/char. # On sgr, the protection parameter is ignored. # No check is made to make sure that only 3 parameters are output. # standout= reverse + half-intensity = 3 | 5. # bold= reverse + underline = 2 | 3. # note that half-bright blinking doesn't look different from # normal blinking. # # NOTE:you must program the function keys first, label second! # ATT4410v1|ATT5410v1|att5410v1|att4410v1|4410v1|tty5410v1|5410v1|AT&T 4410/5410 terminal in 80 column mode - version 1 @(#)4410.ti 1.4, am, hs, mir, msgr, xon, cols#80, it#8, lh#2, lines#24, lw#8, nlab#8, wsl#80, acsc=``aaffhhggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~00++--\,\,.., is1=\E[?3l\E)0, is2=\E[0m^O, bel=^G, blink=\E[5m, bold=\E[4;7m, clear=\E[H\E[J, cr=\r, csr=\E[%i%p1%d;%p2%dr, cub1=\b, cud1=\E[B, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[P, dim=\E[2m, dl1=\E[M, ed=\E[J, el=\E[K, fsl=\E8, home=\E[H, ht=\t, ich1=\E[@, il1=\E[L, ind=\n, invis=\E[8m, is3=\E[1;03q\s\s\sf1\s\s\s\s\s\s\s\s\s\s\s\EOP\E[2;03q\s\s\sf2\s\s\s\s\s\s\s\s\s\s\s\EOQ\E[3;03q\s\s\sf3\s\s\s\s\s\s\s\s\s\s\s\EOR\E[4;03q\s\s\sf4\s\s\s\s\s\s\s\s\s\s\s\EOS\E[5;03q\s\s\sf5\s\s\s\s\s\s\s\s\s\s\s\EOT\E[6;03q\s\s\sf6\s\s\s\s\s\s\s\s\s\s\s\EOU\E[7;03q\s\s\sf7\s\s\s\s\s\s\s\s\s\s\s\EOV\E[8;03q\s\s\sf8\s\s\s\s\s\s\s\s\s\s\s\EOW, kbs=\b, kclr=\E[2J, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf5=\EOT, kf6=\EOU, kf7=\EOV, kf8=\EOW, khome=\E[H, kll=\E[24;1H, ll=\E[24H, nel=\r\n, pfx=\E[%p1%1d;%p2%l%2.2dq\s\s\sf%p1%1d\s\s\s\s\s\s\s\s\s\s\s%p2%s, pln=\E[%p1%d;00q%p2%:-16s, rc=\E8, rev=\E[7m, ri=\EM, rmacs=^O, rmso=\E[m, rmul=\E[m, rs2=\Ec\E[?3l\E[2;0y, sc=\E7, sgr=\E[0%?%p1%p5%|%t;2%;%?%p2%p6%|%t;4%;%?%p4%t;5%;%?%p3%p1%|%p6%|%t;7%;%?%p7%t;8%;m%?%p9%t^N%e^O%;, sgr0=\E[m^O, smacs=^N, smso=\E[2;7m, smul=\E[4m, tsl=\E7\E[25;%p1%{1}%+%dH, att4410v1-w|ATT4410v1-w|att5410v1-w|ATT5410v1-w|4410v1-w|tty5410v1-w|5410v1-w|AT&T 4410/5410 terminal in 132 column mode - version 1 @(#)4410.ti 1.4, cols#132,is1=\E[?3h\E)0,rs2=\Ec\E[?3h\E[2;0y,wsl#132,use=4410v1, att4410|ATT4410|att5410|ATT5410|4410|tty5410|5410|AT&T 4410/5410 terminal in 80 column mode - version 2 @(#)4410.ti 1.4, pfx=\E[%p1%d;%p2%l%02dq f%p1%d %p2%s, use=4410v1, ATT4410-nfk|att4410-nfk|att5410-nfk|ATT5410-nfk|4410-nfk|tty5410-nfk|5410-nfk|version 1 AT&T 4410/5410 entry without function keys @(#)4410.ti 1.4, pln@, is3@, kf1@, kf2@, kf3@, kf4@, kf5@, kf6@, kf7@, kf8@, use=att4410, att5410-w|ATT5410-w|att4410-w|4410-w|tty5410-w|5410-w|AT&T 4410/5410 in 132 column mode @(#)4410.ti 1.4, cols#132, is1=\E[?3h\E)0,rs2=\Ec\E[?3h\E[2;0y, wsl#132, use=att4410, 5410-nsl|att5410-nsl|ATT5410-nsl|4410-nsl|att4410-nsl|ATT4410-nsl|tty5410-nsl|tty5410 entry without pln defined @(#)4410.ti 1.4, pln@, use=tty5410, otty5410|teletype 5410 for S5R2 curses @(#)4410.ti 1.4, tsl=\E7\E[25;%p1%{1}%+%dH, use=tty5410, # Info: # 5410 in terms of a vt100 # v5410| 5410 in terms of a vt100 @(#)4410.ti 1.4, am, mir, msgr, xon, cols#80, it#8, lines#24, vt#3, acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, bel=^G, blink=\E[5m$<2>, bold=\E[1m$<2>, clear=\E[H\E[J$<50>, cr=\r, csr=\E[%i%p1%d;%p2%dr, cub1=\b, cud1=\n, cuf1=\E[C$<2>, cup=\E[%i%p1%d;%p2%dH$<5>, cuu1=\E[A$<2>, dch1=\E[P, dl1=\E[M, ed=\E[J$<50>, el=\E[K$<3>, el1=\E[1K$<3>, enacs=\E(B\E)0, home=\E[H, ht=\t, hts=\EH, ich1=\E[@, il1=\E[L, ind=\n, ka1=\EOq, ka3=\EOs, kb2=\EOr, kbs=\b, kc1=\EOp, kc3=\EOn, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kent=\EOM, kf0=\EOy, kf1=\EOP, kf10=\EOx, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf5=\EOt, kf6=\EOu, kf7=\EOv, kf8=\EOl, kf9=\EOw, rc=\E8, rev=\E[7m$<2>, ri=\EM$<5>, rmacs=^O, rmkx=\E[?1l\E>, rmso=\E[m$<2>, rmul=\E[m$<2>, rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7, sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t^N%e^O%;$<2>, sgr0=\E[m^O$<2>, smacs=^N$<2>, smkx=\E[?1h\E=, smso=\E[1;7m$<2>, smul=\E[4m$<2>, tbc=\E[3g, # Info: # # Teletype Model 5420 -- A souped up 5410, with multiple windows, # even! the 5420 has three modes: scroll, window or page mode # this terminfo should work in scroll or window mode, but doesn't # take advantage of any of the differences between them. # ATT4415|att4415|4415|tty5420|att5420|ATT5420|5420|AT&T 4415/5420 in 80 column mode @(#)4415.ti 1.4, # Info: # Memory below (2 lines!) # xon,db, mir, # Info: # 3 pages of memory (plus some spare) # nlab#8, lh#2, lw#8, wsl#55, lm#78, cbt=\E[Z, clear=\E[x\E[J, cnorm=\E[11;0j, cub=\E[%p1%dD, cud=\E[%p1%dB, cuf=\E[%p1%dC, cuu=\E[%p1%dA, # Info: # The 5410 sequences would work for these, but these # work in both scroll and window mode... # cup=\E[%i%p1%d;%p2%dx, cvvis=\E[11;1j, dch=\E[%p1%dP, dl=\E[%p1%dM, ech=\E[%p1%ds\E[%p1%dD, flash=\E[?5h$<200>\E[?5l, home=\E[x, hpa=\E[%p1%{1}%+%dG, hts=\EH, # Info: # Unset insert character so insert mode works # ich1@, ich=\E[%p1%d@, il=\E[%p1%dL, indn=\E[%p1%dE, # Info: # set 80 column mode, # is1=\E[?3l$<100>, # is2 escape sequence: # 1) turn off all fonts # 2) function keys off, keyboard lock off, control display off, # insert mode off, erasure mode off, # 3) full duplex, monitor mode off, send graphics off, nl on lf off # 4) reset origin mode # 5) set line wraparound # 6) exit erasure mode, positional attribute mode, and erasure extent mode # 7) clear margins # 8) program ENTER to transmit ^J, # We use \212 to program the ^J because a bare ^J will get translated by # UNIX into a CR/LF. The enter key is needed for AT&T uOMS. # 1 2 3 4 5 6 7 8 # is2=\E[0m^O\E[1;2;3;4;6l\E[12;13;14;20l\E[?6;97;99l\E[?7h\E[4i\Ex\E[21;1j\212, # Info: # set screen color to black, # is3=\E[?5l, kbeg=\Et, kcbt=\E[Z, kdch1=\E[P, kdl1=\E[M, # info: # No representation in terminfo for the delete word key # kdw1=\Ed # kel=\E[2K, kend=\Ez, kent=\Eent, # Info: # This assumes the power-up send sequence... # kf1=\EOc, kf2=\EOd, kf3=\EOe, kf4=\EOf, kf5=\EOg, kf6=\EOh, kf7=\EOi, kf8=\EOj, kich1=\E[4h, kil1=\E[L, kind=\E[T, kll=\Eu, knp=\E[U, kpp=\E[V, kri=\E[S, lf1=F1, lf2=F2, lf3=F3, lf4=F4, lf5=F5, lf6=F6, lf7=F7, lf8=F8, ll=\Ew, mc0=\E[?2i, mc4=\E[4i, mc5=\E[5i, mrcup=\E[%i%p1%d;%p2%dt, pfx=\E[%p1%d;%p2%l%02dq F%p1%d %p2%s, pln=\E[%p1%d;0;0;0q%p2%:-16.16s, rmln=\E|, smln=\E~, prot=\EV, rin=\E[%p1%dF, # Info: # This rmcup is not strictly necessary, but it helps maximize # memory usefulness # rmcup=\Ez, # rmir=\E[4l, rmkx=\E[19;0j\E[21;1j\212, sgr0=\E[0m^O, # Info: # sgr0=\E[0m\EW^O, # sgr=\E[0%?%p1%p5%|%t;2%;%?%p2%p6%|%t;4%;%?%p4%t;5%;%?%p3%p1%|%p6%|%t;7%;%?%p7%t;8%;m%?%p9%t^N%e^O%;, # Info: # sgr=\E[%?%p1%t2;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p5%t;2%;%?%p7%t;8%;m%?%p8%t\EV%;%?%p9%t^N%e^O%;, # smir=\E[4h, # Info: # This programs the SYS PF keys to send a set sequence. # It also sets up labels f1, f2, ..., f8, and sends edit keys. # This string causes them to send the strings kf1-kf8 # when pressed in SYS PF mode. # smkx=\E[19;1j\E[21;4j\Eent, tbc=\E[3g, tsl=\E7\E[25;%p1%{8}%+%dH, vpa=\E[%p1%{1}%+%dd, use=att4410, ATT4415-w|att4415-w|4415-w|tty5420-w|att5420-w|ATT5420-w|5420-w|AT&T model 4415/5420 in 132 column mode @(#)4415.ti 1.4, lm#54, cols#132, wsl#97, # Info: # set 132 column mode, # is1=\E[?3h$<100>, use=att4415, ATT4415-rv|att4415-rv|4415-rv|tty5420-rv|att5420-rv|ATT5420-rv|5420-rv|AT&T model 4415/5420 80 columns in reverse video @(#)4415.ti 1.4, flash=\E[?5l$<200>\E[?5h, # Info: # set screen color to white, # is3=\E[?5h, use=att4415, ATT4415-w-rv|att4415-w-rv|4415-w-rv|tty5420-w-rv|att5420-w-rv|ATT5420-w-rv|5420-w-rv|AT&T model 4415/5420 132 columns in reverse video @(#)4415.ti 1.4, lm#54, cols#132, wsl#97, flash=\E[?5l$<200>\E[?5h, # Info: # set 132 column mode, # is1=\E[?3h$<100>, # Info: # set screen color to white, # is3=\E[?5h, use=att4415, # Info: # Note that this mode permits programming USER PF KEYS and labels # However, when you program user pf labels you have to reselect # user pf keys to make them appear! # ATT4415+nl|att4415+nl|4415+nl|tty5420+nl|att5420+nl|ATT5420+nl|5420+nl|generic AT&T 4415/5420 changes for not changing labels @(#)4415.ti 1.4, kf1@, kf2@, kf3@, kf4@, kf5@, kf6@, kf7@, kf8@, pfx=\E[%p1%d;%p2%l%02d;0;1q F%p1%d %p2%s, pln=\E[%p1%d;0;0;1q%p2%:-16.16s, ATT4415-nl|att4415-nl|4415-nl|tty5420-nl|att5420-nl|ATT5420-nl|5420-nl|AT&T 4415/5420 without changing labels @(#)4415.ti 1.4, kf1@, kf2@, kf3@, kf4@, kf5@, kf6@, kf7@, kf8@, use=att4415+nl, use=att4415, ATT4415-rv-nl|att4415-rv-nl|4415-rv-nl|tty5420-rv-nl|5420-rv-nl|ATT5420-rv-nl|att5420-rv-nl|AT&T 4415/5420 reverse video without changing labels @(#)4415.ti 1.4, kf1@, kf2@, kf3@, kf4@, kf5@, kf6@, kf7@, kf8@, use=att4415+nl, use=att4415-rv, ATT4415-w-nl|att4415-w-nl|4415-w-nl|tty5420-w-nl|5420-w-nl|att5420-w-nl|ATT5420-w-nl|AT&T 4415/5420 132 cols without changing labels @(#)4415.ti 1.4, kf1@, kf2@, kf3@, kf4@, kf5@, kf6@, kf7@, kf8@, use=att4415+nl, use=att4415-w, ATT4415-w-rv-n|att4415-w-rv-n|4415-w-rv-nl|tty5420-w-rv-n|5420-w-rv-nl|att5420-w-rv-n|ATT5420-w-rv-n|AT&T 4415/5420 132 cols reverse without changing labels @(#)4415.ti 1.4, kf1@, kf2@, kf3@, kf4@, kf5@, kf6@, kf7@, kf8@, use=att4415+nl, use=att4415-w-rv, otty5420|teletype 5420 for SVR2 curses on the 3B-20's @(#)4415.ti 1.4, hpa=\E[%p1%{1}%+%dG, vpa=\E[%p1%{1}%+%dd, use=tty5420, att5420_2|ATT5420_2|5420_2|AT&T 5420 model 2 in 80 column mode @(#)4415.ti 1.4, am, db, hs, mir, msgr, xon, cols#80, it#8, lh#2, lines#24, lm#78, lw#8, nlab#8, wsl#55, blink=\E[5m, bold=\E[4;7m, cbt=\E[1Z, clear=\EH\EJ, cnorm=\E[11;0j, cr=\EG, csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=\b, cud1=\E[1B, cuf=\E[%p1%dC, cuf1=\E[1C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cvvis=\E[11;1j, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m, dl=\E[%p1%dM, dl1=\E[M, ech=\E[%p1%ds\E[%p1%dD, ed=\E[0J, el=\E[0K, el1=\E[1K, flash=\E[?5h$<200>\E[?5l, fsl=\E8, home=\E[0;0H, hpa=\E[%p1%{1}%+%dG, ht=\t, hts=\EH, ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=\n, indn=\E[%p1%dE, invis=\E[8m, is1=\E[0;23r\Ex\Ey\E[2;0j\E[3;3j\E[4;0j\E[5;0j\E[6;0j\E[7;0j\E[8;0j\E[9;1j\E[10;0j\E[15;0j\E[16;1j\E[19;0j\E[20;1j\E[29;0j\E[1;24r, kbeg=\Et, kbs=\b, kcbt=\E[Z, kclr=\E[2J, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[P, kdl1=\E[M, kel=\E[2K, kend=\Ez, kent=\n, kf1=\EOc, kf2=\EOd, kf3=\EOe, kf4=\EOf, kf5=\EOg, kf6=\EOh, kf7=\EOi, kf8=\EOj, khome=\E[H, kich1=\E[4h, kil1=\E[L, kind=\E[T, kll=\Eu, knp=\E[U, kpp=\E[V, kri=\E[S, lf1=F1, lf2=F2, lf3=F3, lf4=F4, lf5=F5, lf6=F6, lf7=F7, lf8=F8, ll=\Ew, mc0=\E[?;2i, mc4=\E[4i, mc5=\E[5i, mrcup=\E[%i%p1%d;%p2%dt, nel=\r\n, pfx=\E[%p1%d;%p2%l%02dq\s\s\sF%p1%d\s\s\s\s\s\s\s\s\s\s\s%p2%s\E~, pln=\E[%p1%d;0;0;0q%p2%:-16.16s\E~, prot=\EV, rc=\E8, rev=\E[7m, ri=\EM, rin=\E[%p1%dF, rmacs=^O, rmkx=\E[19;0j, rmln=\E|, rmso=\E[m, rmul=\E[m, rs2=\Ec\E[?3l\E[2;0y, sc=\E7, sgr=\E[0%?%p1%p5%|%t;2%;%?%p2%p6%|%t;4%;%?%p4%t;5%;%?%p3%p1%|%p6%|%t;7%;%?%p7%t;8%;m%?%p9%t^N%e^O%;, sgr0=\E[0m^O, smacs=^N, smkx=\E[19;1j, smln=\E~, smso=\E[2;7m, smul=\E[4m, tbc=\E[3g, tsl=\E7\E[25;%p1%{8}%+%dH, vpa=\E[%p1%{1}%+%dd, att5420_2-w|ATT5420_2-w|5420_2-w|AT&T 5420 model 2 in 132 column mode @(#)4415.ti 1.4, cols#132, is1=\E[0;23r\Ex\Ey\E[2;0j\E[3;3j\E[4;0j\E[5;1j\E[6;0j\E[7;0j\E[8;0j\E[9;1j\E[10;0j\E[15;0j\E[16;1j\E[19;0j\E[20;1j\E[29;0j\E[1;24r, use=5420_2, 4418|att4418|ATT4418|5418|att5418|ATT5418|AT&T 5418 in 80 column mode @(#)4418.ti 1.2, am, xon, cols#80, lines#24, bel=^G, blink=\E[5m, clear=\E[H\E[2J, cr=\r, cub=\E[%p1%dD, cub1=\E[D, cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[1P, dim=\E[2m, dl=\E[%p1%dM, dl1=\E[M, ed=\E[0J, el=\E[0K, home=\E[H, ich=\E[%p1%d@, ich1=\E[1@, il=\E[%p1%dL, il1=\E[1L, ind=\n, is1=\E[?3l, is2=\E)0\E?6l\E?5l, kclr=\E[%, kcub1=\E@, kcud1=\EU, kcuf1=\EA, kcuu1=\ES, khome=\Ec, kent=\E[, kf1=\E[h, kf10=\E[m, kf11=\E[n, kf12=\E[o, kf13=\E[H, kf14=\E[I, kf15=\E[J, kf18=\E[K, kf19=\E[L, kf2=\E[i, kf20=\E[E, kf21=\E[_, kf22=\E[M, kf23=\E[N, kf24=\E[O, kf3=\E[j, kf6=\E[k, kf7=\E[l, kf8=\E[f, kf9=\E[w, rc=\E8, rev=\E[7m, rmacs=^O, rmso=\E[0m, rmul=\E[0m, sc=\E7, sgr0=\E[0m^O, smacs=^N, smso=\E[7m, smul=\E[4m, 4418-w|att4418-w|ATT4418-w|5418-w|att5418-w|ATT5418-w|AT&T 5418 in 132 column mode @(#)4418.ti 1.2, cols#132,is1=\E[?3h,use=5418, 4420|tty4420|teletype 4420 @(#)4420.ti 1.1, xon,da, db, eo, msgr, ul,lm#72, cols#80, lines#24, bel=^G, clear=\EH\EJ, cr=\EG, cuu1=\EA, cud1=\EB,cuf1=\EC,cub1=\ED, cup=\EY%p1%' '%+%c%p2%' '%+%c, cuu1=\EA, dch1=\EP, dl1=\EM, ed=\EJ, el=\Ez, il1=\EL, home=\EH, ind=\EH\EM\EY7 , kcub1=\b, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, kf0=\EU, kf3=\E@, lf0=segment advance, lf3=cursor tab, kind=\ES, kri=\ET, kcbt=\EO, kclr=\EJ, kil1=\EL, kdl1=\EM, kich1=\E\^, kdch1=\EP, khome=\EH, rmdc@, rmso=\E~, rmul=\EZ, smdc@, smso=\E}, smul=\E\\, # Info: # The following is a termcap entry for the Teletype 4424 # asyncronous keyboard-display terminal. It supports # the vi editor. The terminal must be "set up" as follows, # # HIGHLIGHT DEFINITION 3-TONE # DISPLAY FUNCTION GROUP III # # The second entry below provides limited (a la adm3a) # operation under GROUP II. # # This must be used with DISPLAY FUNCTION GROUP I or III # and HIGHLIGHT DEFINITION 3-TONE # 4424|att4424|ATT4424|tty4424|4424-3|teletype 4424 @(#)4424.ti 1.7, xon,cr=^M, ind=^J, bel=^G, cols#80, lines#24, am, smso=\E[7m, rmso=\E~, rev=\E[7m, smul=\E[4m, rmul=\EZ, ri=\ET, # Info: # The terminal has either bold or blink, depending on options # xon,bold=\E[1m, blink=\E[5m, ht=^I, cbt=\EO, home=\E[H, cuu1=\EA, cuu=\E[%p1%dA, cud1=\EB, cud=\E[%p1%dB, cuf1=\EC, cuf=\E[%p1%dC, smcup=\E[1m, cub1=^H, cub=\E[%p1%dD, cup=\E[%i%p1%d;%p2%dH, clear=\E[H\E[2J, ed=\EJ, el=\Ez, nel=\EE, hts=\EH, tbc=\EF, smacs=\E(0, rmacs=\E(B, is2=\E[20l\E[?7h, csr=\E[%i%p1%d;%p2%dr, il1=\EL, il=\E[%p1%dL, dl1=\EM, dl=\E[%p1%dM, ich1=\E\^, ich=\E[%p1%d@, dch1=\EP, dch=\E[%p1%dP, sgr=\E[0%?%p1%p3%|%t;7%;%?%p2%t;4%;%?%p6%t;1%;%?%p4%t;5%;m, sgr0=\EX\E~\EZ\E4\E(B, kcuu1=\E[A, kcud1=\E[B, kcub1=\E[D, kcuf1=\E[C, khome=\E[H, kbs=^H, kclr=\EJ, kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, 4424-1|att4424-1|ATT4424-1|tty4424-1|teletype 4424 in display function group I @(#)4424.ti 1.7, kclr@,kcub1=\ED,kcud1=\EB,kcuf1=\EC,kcuu1=\EA,khome@,use=4424, # Info: # The Teletype 5425 is really version 2 of the Teletype 5420. It # is quite similar, except for some minor differences. No page # mode, for example, so all of the cup sequences used above have # to change back to what's being used for the 5410. Many of the # option settings have changed their numbering as well. # # This has been tested on a preliminary model. # ATT4425|ATT5425|att5425|4425|5425|tty5425|att4425|AT&T 4425/5425 @(#)4425.ti 1.4, am, da, db, hs, mir, msgr, xenl, xon, cols#80, it#8, lh#2, lines#24, lm#78, lw#8, nlab#8, wsl#55, acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, bel=^G, blink=\E[5m, bold=\E[4;7m, cbt=\E[Z, clear=\E[H\E[J, cnorm=\E[12;0j, cr=\r, csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=\b, cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, cvvis=\E[12;1j, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m, dl=\E[%p1%dM, dl1=\E[M, ech=\E[%p1%ds\E[%p1%dD, ed=\E[J, el=\E[K, el1=\E[1K, enacs=\E(B\E)0, flash=\E[?5h$<200>\E[?5l, fsl=\E8, home=\E[H, hpa=\E[%p1%{1}%+%dG, ht=\t, hts=\EH, ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L, ind=\n, indn=\E[%p1%dE, invis=\E[8m, is1=\E<\E[?3l$<100>, is2=\E[0m^O\E[1;2;3;4;6l\E[12;13;14;20l\E[?6;97;99l\E[?7h\E[4i\Ex\E[25;1j\212, is3=\E[?5l, kbeg=\Et, kbs=\b, kcbt=\E[Z, kclr=\E[J, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[P, kdl1=\E[M, kel=\E[2K, kend=\Ez, kent=\Eent, kf1=\EOc, kf2=\EOd, kf3=\EOe, kf4=\EOf, kf5=\EOg, kf6=\EOh, kf7=\EOi, kf8=\EOj, khome=\E[H, kich1=\E[4h, kil1=\E[L, kind=\E[T, kri=\E[S, ll=\E[24H, mc0=\E[?2i, mc4=\E[4i, mc5=\E[5i, nel=\r\n, pfx=\E[%p1%d;%p2%l%02dq\s\s\sF%p1%1d\s\s\s\s\s\s\s\s\s\s\s%p2%s, pln=\E[%p1%d;0;0;0q%p2%:-16.16s, prot=\EV, rc=\E8, rev=\E[7m, ri=\EM, rin=\E[%p1%dF, rmacs=^O, rmir=\E[4l, rmkx=\E[21;0j\E[25;1j\212, rmln=\E|, rmso=\E[m, rmul=\E[m, rs2=\Ec\E[?3l\E[2;0y, sc=\E7, sgr=\E[0%?%p1%p5%|%t;2%;%?%p2%p6%|%t;4%;%?%p4%t;5%;%?%p3%p1%|%p6%|%t;7%;%?%p7%t;8%;m%?%p9%t^N%e^O%;, sgr0=\E[m^O, smacs=^N, smir=\E[4h, smkx=\E[21;1j\E[25;4j\Eent\E~, smln=\E~, smso=\E[2;7m, smul=\E[4m, tbc=\E[3g, tsl=\E7\E[25;%p1%{8}%+%dH, vpa=\E[%p1%{1}%+%dd, ATT4425-nl|ATT5425-nl|att5425-nl|4425-nl|5425-nl|tty5425-nl|att4425-nl|AT&T 4425/5425 without label change 80 column mode @(#)4425.ti 1.4, smkx=\E[21;1j\E[25;4j\Eent,use=4425, ATT4425-nl-w|ATT5425-nl-w|att5425-nl-w|4425-nl-w|5425-nl-w|tty5425-nl-w|att4425-nl-w|AT&T 4425/5425 without label change 132 column mode @(#)4425.ti 1.4, smkx=\E[21;1j\E[25;4j\Eent,use=4425-w, 4425-fk|5425-fk|tty5425-fk|att4425-fk|AT&T 4425/5425 without function keys @(#)4425.ti 1.4, smkx@,rmkx@,use=5425, ATT4425-w|att5425-w|ATT5425-w|att4425-w|4425-w|5425-w|tty5425-w|teletype 4425/5425 in 132 column mode @(#)4425.ti 1.4, lm#54, cols#132, wsl#97, # Info: # set 132 column mode, # is1=\E[?3h$<100>, use=tty5425, 4425-w-fk|5425-w-fk|tty5425-w-fk|att4425-w-fk|ATT4425-w-fk|att5425-w-fk|ATT5425-w-fk|AT&T 4425/5425 without function keys in wide mode @(#)4425.ti 1.4, smkx@,rmkx@,use=5425-w, 4426|att4426|ATT4426|tty4426|teletype 4426S @(#)4426.ti 1.2, am,xon, is1=\Ec\E[?7h, bel=^G, bold=\E[5m, clear=\E[H\E[2J\E[1U\E[H\E[2J\E[1V, cols#80, cr=^M, cub1=\E[D, cub=\E[%p1%dD, cud1=\E[B, cud=\E[%p1%dB, cuf1=\E[C, cuf=\E[%p1%dC, cup=\E[%i%p1%d;%p2%dH, cuu1=\EA, cuu=\E[%p1%dA, dch1=\EP, dch=\E[%p1%dP, dl1=\E[M, dl=\E[%p1%dM, ed=\E[J, el=\E[0K, home=\E[H, hpa=\E[%p1%dG, hts=\E1, ht=\t, ich1=\E\^, ich=\E[%p1%d@, il1=\EL, il=\E[%p1%dL, ind=\ES, ind=^J, indn=\E[%p1%dS, is2=\E[m\E[1;24r, kbs=^H, kcbt=\EO, kclr=\E[2J, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf5=\EOT, kf6=\EOU, kf7=\EOV, kf8=\EOW, khome=\E[H, kll=\E[24;1H, lines#24, ll=\E[24H, nel=^M^J, rc=\E8, rev=\E[7m, ri=\EM, ri=\ET, ri=\E[1U, rin=\E[%p1%dT, rmacs=\E(B, rmso=\E[0m, rmul=\E[0m, rmul=\E[m, rs2=\Ec\E[?3l\E[2;0y, sc=\E7, sgr0=\E[0m\E(B, smacs=\E(0, smso=\E[5m, smul=\E[4m, smul=\E[4m, tbc=\E[3g, lm#48,da,db, vpa=\E[%p1%dd, # Terminfo entry for the AT&T 510 A Personal Terminal # Function keys 9 - 16 are available only after the # screen labeled (soft keys/action blocks) are labeled. Function key # 9 corresponds to the leftmost touch target on the screen, # function key 16 corresponds to the rightmost. # # # This entry is based on one done by Ernie Rice at Summit, NJ and # changed by Anne Gallup, Skokie, IL, ttrdc!anne # att510a|510a|bct510a|510A|AT&T 510A Personal Terminal @(#)510a.ti 1.3, am, xenl, mir, msgr, xon, cols#80, lines#24, nlab#8, lh#2, lw#7, cbt=\E[Z, bel=^G, cr=^M, tbc=\E[3g, clear=\E[H\E[J, el=\E[0K, ed=\E[0J, cup=\E[%i%p1%d;%p2%dH, cud1=\E[1B, home=\E[H, cub1=^H, cnorm=\E[11;3|, cuf1=\E[C, cuu1=\E[A, civis=\E[11;0|, cvvis=\E[11;2|, dch1=\E[P, dl1=\E[M, smacs=^N, blink=\E[5m, bold=\E[2;7m, dim=\E[2m, rev=\E[7m, smso=\E[7m, smul=\E[4m, rmacs=^O, sgr0=\E[m^O, rmso=\E[m, rmul=\E[m, ff=^L, is3=\E[21;1|\212, il1=\E[L, kbs=^H, kcud1=\E[B, kf1=\EOm, kf2=\EOV, kf3=\EOu, kf4=\ENj, kf5=\ENe, kf6=\ENf, kf7=\ENh, kf8=\E[H, kf9=\EOc, kf10=\EOd, kf11=\EOe, kf12=\EOf, kf13=\EOg, kf14=\EOh, kf15=\EOi, kf16=\EOj, kcub1=\E[D, kcuf1=\E[C, kind=\E[S, kri=\E[T, kcuu1=\E[A, nel=\EE, dch=\E[%p1%dP, dl=\E[%p1%dM, cud=\E[%p1%dB, il=\E[%p1%dL, cub=\E[%p1%dD, cuf=\E[%p1%dC, cuu=\E[%p1%dA, mc0=\E[0i, mc4=\E[?8i, mc5=\E[?4i, rc=\E8, sc=\E7, ind=^J, ri=\EM, sgr=\E[0%?%p5%p6%|%t;2%;%?%p2%t;4%;%?%p4%t;5%;%?%p3%p1%|%p6%|%t;7%;m%?%p9%t^N%e^O%;, hts=\EH, ht=\t, acsc=hrisjjkkllmmnnqqttuuvvwwxx{{||}}~~-f\,h.e+g`b, pln=\E[%p1%dp%p2%:-16s, kcbt=\E[Z, enacs=\E(B\E)1, kLFT=\E[u, kRIT=\E[v, el1=\E[1K, is1=\E(B\E)1\E[2l, # Terminfo entry for the AT&T 510 D Personal Terminal # Function keys 9 through 16 are accessed by bringing up the # system blocks. # Function key 9 corresponds to the leftmost touch target on the screen, # function key 16 corresponds to the rightmost. # # There are problems with soft key labeling. These are due to # strangenesses in the native terminal that are impossible to # describe in a terminfo. # # att510d|510d|bct510d|510D|AT&T 510D Personal Terminal @(#)510d.ti 1.2, am, da, db, mir, msgr, xenl, xon, cols#80, lh#2, lines#24, lm#48, lw#7, nlab#8, acsc=hrisjjkkllmmnnqqttuuvvwwxx{{||}}~~-f\,h.e+g`b, bel=^G, blink=\E[5m, bold=\E[2;7m, cbt=\E[Z, clear=\E[H\E[J, cnorm=\E[11;3|, cr=^M, cub1=^H, cub=\E[%p1%dD, cud1=\E[1B, cud=\E[%p1%dB, cuf1=\E[C, cuf=\E[%p1%dC, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, cuu=\E[%p1%dA, cvvis=\E[11;2|, dch1=\E[P, dch=\E[%p1%dP, dim=\E[2m, dl1=\E[M, dl=\E[%p1%dM, ed=\E[0J, el1=\E[1K, el=\E[0K, enacs=\E(B\E)1, ff=^L, home=\E[H, hpa=\E[%p1%{1}%+%dG, hts=\EH, ht=\t, ich=\E[%p1%d@, il1=\E[L, il=\E[%p1%dL, ind=^J, indn=\E[%p1%dS, invis=\E[8m, is1=\E(B\E)1\E[5;0|, is3=\E[21;1|\212, kbs=^H, kcbt=\E[Z, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf10=\EOd, kf11=\EOe, kf12=\EOf, kf13=\EOg, kf14=\EOh, kf15=\EOi, kf16=\EOj, kf1=\EOm, kf2=\EOV, kf3=\EOu, kf4=\ENj, kf5=\ENe, kf6=\ENf, kf7=\ENh, kf8=\E[H, kf9=\EOc, kind=\E[S, kLFT=\E[u, kri=\E[T, kRIT=\E[v, ll=\E#2, mc0=\E[0i, mc4=\E[?8i, mc5=\E[?4i, mgc=\E:, nel=\EE, pln=\E[%p1%dp%p2%:-16s, rc=\E8, rep=%p1%c\E[%p2%{1}%-%db, rev=\E[7m, ri=\EM, rin=\E[%p1%dT, rmacs=^O, rmir=\E[4l, rmkx=\E[19;0|, rmln=\E<, rmso=\E[m, rmul=\E[m, rmxon=\E[29;1|, rs2=\E[5;0|, sc=\E7, sgr0=\E[m^O, sgr=\E[0%?%p5%p6%|%t;2%;%?%p2%t;4%;%?%p4%t;5%;%?%p3%p1%|%p6%|%t;7%;%?%p7%t;8%;m%?%p9%t^N%e^O%;, smacs=^N, smgl=\E4, smgr=\E5, smir=\E[4h, smkx=\E[19;1|, smln=\E?, smso=\E[7m, smul=\E[4m, smxon=\E[29;0|, tbc=\E[3g, vpa=\E[%p1%{1}%+%dd, ATT513|att513|513|att513-page|513-page|attis513-pfk|513bct|AT&T 513 Terminal using page mode @(#)513.ti 1.3, am, chts, mir, msgr, xenl, xon, cols#80, lh#2, lines#24, lw#8, nlab#8, acsc=hrisjjkkllmmnnqqttuuvvwwxx{{||}}~~-f\,h.e+g`b, bel=^G, blink=\E[5m, bold=\E[4;7m, cbt=\E[Z, clear=\E[H\E[J, cnorm=\E[11;0|, cr=\r, csr=%i\E[%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=\b, cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, cvvis=\E[11;1|, dch=\E[%p1%dP, dch1=\E[P$<1>, dim=\E[2m, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K, enacs=\E(B\E)1, home=\E[H, hpa=\E[%p1%{1}%+%dG, ht=\t, hts=\EH, ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L, ind=\n, indn=\E[%p1%dE, invis=\E[8m, is1=\E?\E[3;3|\E[10;0|\E[21;1|\212\E[6;1|\E[1{\E[?99l, kBEG=\ENB, kCAN=\EOW, kCMD=\EOU, kCPY=\END, kCRT=\EON, kDC=\ENF, kDL=\ENE, kEND=\ENN, kEOL=\EOA, kEXT=\EOK, kFND=\EOX, kHLP=\EOM, kHOM=\ENM, kIC=\ENJ, kLFT=\ENK, kMOV=\ENC, kMSG=\EOL, kNXT=\ENH, kOPT=\EOR, kPRT=\EOZ, kPRV=\ENG, kRDO=\EOT, kRES=\EOQ, kRIT=\ENL, kRPL=\EOY, kSAV=\EOO, kSPD=\EOP, kUND=\EOS, kbeg=\E9, kbs=\b, kcan=\EOw, kcbt=\E[Z, kclo=\EOV, kclr=\E[J, kcmd=\EOu, kcpy=\ENd, kcrt=\EOn, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\ENf, kdl1=\ENe, kel=\EOa, kend=\E0, kent=\Eent, kext=\EOk, kf1=\EOc, kf2=\EOd, kf3=\EOe, kf4=\EOf, kf5=\EOg, kf6=\EOh, kf7=\EOi, kf8=\EOj, kfnd=\EOx, khlp=\EOm, khome=\E[H, kich1=\ENj, kind=\E[S, kmov=\ENc, kmrk=\ENi, kmsg=\EOl, knp=\E[U, knxt=\ENh, kopn=\EOv, kopt=\EOr, kpp=\E[V, kprt=\EOz, kprv=\ENg, krdo=\EOt, kref=\EOb, kres=\EOq, krfr=\ENa, kri=\E[T, krpl=\EOy, krst=\EOB, ksav=\EOo, kslt=\ENI, kspd=\EOp, kund=\EOs, ll=\E#2, mc0=\E[?98l\E[0i, mc4=\E[?98l\E[?8i, mc5=\E[?98l\E[?4i, nel=\EE, pfkey=\E[%p1%d;%p2%l%d;3;0p\s\s\sF%p1%d\s\s\s\s\s\s\s\s\s\s\s%p2%s, pfloc=\E[%p1%d;%p2%l%d;2;0p\s\s\sF%p1%d\s\s\s\s\s\s\s\s\s\s\s%p2%s, pfx=\E[%p1%d;%p2%l%d;1;0p\s\s\sF%p1%d\s\s\s\s\s\s\s\s\s\s\s%p2%s, pln=\E[%p1%dp%p2%:-16s, rc=\E8, rep=%p1%c\E[%p2%{1}%-%db, rev=\E[7m, ri=\EM, rin=\E[%p1%dF, rmacs=^O, rmir=\E[4l, rmkx=\E[19;0|\E[21;1|\212, rmln=\E<, rmso=\E[m, rmul=\E[m, rs1=\E?\E[3;3|\E[10;0|\E[21;1|\212\E[6;1|\E[1{\E[?99l\E[2;0|\E[6;1|\E[8;0|\E[19;0|\E[1{\E[?99l, rs2=\E[5;0|, sc=\E7, sgr=\E[0%?%p1%p5%|%t;2%;%?%p2%p6%|%t;4%;%?%p4%t;5%;%?%p3%p1%|%p6%|%t;7%;%?%p7%t;8%;m%?%p9%t^N%e^O%;, sgr0=\E[m^O, smacs=^N, smir=\E[4h, smkx=\E[19;1|\E[21;4|\Eent, smln=\E?, smso=\E[2;7m, smul=\E[4m, tbc=\E[3g, vpa=\E[%p1%{1}%+%dd, ATT500|att500|bct500|500|BCT500|AT&T-IS 500 terminal @(#)513.ti 1.3, use=att513, # Info: # 5620 terminfo (2.0 or later ROMS with char attributes) # # assumptions: # ind (scroll forward one line) is only done at screen bottom # att5620|ATT5620|dmd|tty5620|ttydmd|5620|5620 terminal 88 columns @(#)5620.ti 1.3, npc,xon,am, cols#88, lines#70, it#8, bel=^G, cr=^M, clear=\E[H\E[J, ht=^I, nel=^J, # Info: # clear to end of line, screen # el=\E[K, ed=\E[J, # Info: # scroll screen up/down one/many lines # ind=\E[S, indn=\E[%p1%dS, ri=\E[T, rin=\E[%p1%dT, # Info: # cursor arbitrarily, down, home, left, right, up # cup=\E[%i%p1%d;%p2%dH, home=\E[H, # cup=\E[%i%p1%d;%p2%dH, cud1=\E[B, home=\E[H, cub1=^H, cuf1=\E[C, cuu1=\E[A, # Info: # delete/insert one/many characters/lines # dch1=\E[P, dch=\E[%p1%dP, dl1=\E[M, dl=\E[%p1%dM, ich1=\E[@, ich=\E[%p1%d@, il1=\E[L, il=\E[%p1%dL, # Info: # sequences sent by keys: backspace, clear, down-arrow, # home-arrow, left-arrow, home-down, right-arrow, up-arrow # kbs=^H, kclr=\E[2J, kcud1=\E[B, khome=\E[H, kcub1=\E[D, kll=\E[70;1H, kcuf1=\E[C, kcuu1=\E[A, # Info: # program function keys, reset terminal, restore/store cursor # position (padding in pfx cannot be used, since terminal doesn't # have a padding character, but it is needed and FMLI extracts # and uses this information # pfx=\E[%p1%d;%p2%l%dq%p2%s$<230/>, rs1=\Ec, rc=\E8, sc=\E7, # Info: # set/clear underline/standout character attributes # smul=\E[4m, rmul=\E[0m, smso=\E[7m, rmso=\E[0m, # Info: # reverse video, reset character attributes, pseudo-dim, # pseudo-bold # rev=\E[7m, sgr0=\E[0m, dim=\E[2m, bold=\E[2m, att5620-24|ATT5620-24|5620-24|dmd-24|teletype dmd 5620 in a 24x80 layer @(#)5620.ti 1.3, lines#24, use=5620, att5620-34|ATT5620-34|5620-34|dmd-34|teletype dmd 5620 in a 34x80 layer @(#)5620.ti 1.3, lines#34, use=5620, #Info: # Entries for kf15 thru kf28 refer to the shifted system pf keys. # # Entries for kf29 thru kf46 refer to the alternate keypad mode # keys: = * / + 7 8 9 - 4 5 6 , 1 2 3 0 . ENTER 605|705|605bct|ATT605|att605|AT&T 605 80 column 102key keyboard @(#)605.ti 1.5, am, xenl, hs, eslok, mir, msgr, xon, cols#80, it#8, lh#2, lines#24, lw#8, nlab#8, wsl#80, acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l, clear=\E[H\E[J, cnorm=\E[?25h\E[?12l, cr=^M, csr=\E[%i%p1%d;%p2%dr, cup=\E[%i%p1%d;%p2%dH, cud1=\E[B, cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cuf=\E[%p1%dC, cuf1=\E[C, cuu=\E[%p1%dA, cuu1=\E[A, cvvis=\E[?12;25h, dch1=\E[P, dch=\E[%p1%dP, dim=\E[2m, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K, flash=\E[?5h$<200>\E[?5l, fsl=\E8, home=\E[H, ht=\t, ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L, ind=\ED, invis=\E[8m, is1=\E[8;0|\E[?3;4;5;13;15l\E[13;20l\E[?7h\E[12h\E(B\E)0, is2=\E[0m^O, is3=\E(B\E)0, kbs=^H, kcbt=\E[Z, kclr=\E[2J, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[P, kdl1=\E[M, kend=\E[24;1H, kf1=\EOc, kf2=\EOd, kf3=\EOe, kf4=\EOf, kf5=\EOg, kf6=\EOh, kf7=\EOi, kf8=\EOj, kf9=\ENo, kf10=\ENp, kf11=\ENq, kf12=\ENr, kf13=\ENs, kf14=\ENt, kf15=\EOC, kf16=\EOD, kf17=\EOE, kf18=\EOF, kf19=\EOG, kf20=\EOH, kf21=\EOI, kf22=\EOJ, kf23=\ENO, kf24=\ENP, kf25=\ENQ, kf26=\ENR, kf27=\ENS, kf28=\ENT, kf29=\EOP, kf30=\EOQ, kf31=\EOR, kf32=\EOS, kf33=\EOw, kf34=\EOx, kf35=\EOy, kf36=\EOm, kf37=\EOt, kf38=\EOu, kf39=\EOv, kf40=\EOl, kf41=\EOq, kf42=\EOr, kf43=\EOs, kf44=\EOp, kf45=\EOn, kf46=\EOM, khome=\E[H, kil1=\E[L, kind=\E[S, kich1=\E[@, kpp=\E[V, knp=\E[U, kri=\E[T, kLFT=\E[ A, kRIT=\E[ @, ll=\E[24H, mc4=\E[?4i, mc5=\E[?5i, nel=\EE, pfxl=\E[%p1%d;%p2%l%02dq%?%p1%{9}%<%t F%p1%1d %;%p2%s, pln=\E[%p1%d;0;0;0q%p2%:-16.16s, rev=\E[7m, ri=\EM, rmacs=^O, rmir=\E[4l, rs2=\Ec\E[?3l, rc=\E8, rmso=\E[m, rmln=\E[2p, rmul=\E[m, sgr0=\E[m^O, sgr=\E[0%?%p6%t;1%;%?%p5%t;2%;%?%p2%t;4%;%?%p4%t;5%;%?%p3%p1%|%t;7%;%?%p7%t;8%;m%?%p9%t^N%e^O%;, smacs=^N, smir=\E[4h, smso=\E[7m, smul=\E[4m, smln=\E[p, sc=\E7, tsl=\E7\E[25;%i%p1%dx, 605-w|605bct-w|ATT605-w|att605-w|AT&T 605-w 132 column 102 key keyboard @(#)605.ti 1.5, cols#132, is1=\E[8;0|\E[?4;5;13;15l\E[13;20l\E[?3;7h\E[12h\E(B\E)0, wsl#132, use=605, #Info: # Entries for kf15 thru kf28 refer to the shifted system pf keys. # # Entries for kf29 thru kf46 refer to the alternate keypad mode # keys: = * / + 7 8 9 - 4 5 6 , 1 2 3 0 . ENTER 605V2|605V2bct|ATT605V2|att605V2|AT&T 605V2 80 column 102key keyboard @(#)605V2.ti 1.5, am, xenl, hs, eslok, mir, msgr, xon, cols#80, it#8, lh#2, lines#24, lw#8, nlab#8, acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l, clear=\E[H\E[J, cnorm=\E[?25h\E[?12l, cr=^M, csr=\E[%i%p1%d;%p2%dr, cup=\E[%i%p1%d;%p2%dH, cud1=\E[B, cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cuf=\E[%p1%dC, cuf1=\E[C, cuu=\E[%p1%dA, cuu1=\E[A, cvvis=\E[?12;25h, dch1=\E[P, dch=\E[%p1%dP, dim=\E[2m, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K, flash=\E[?5h$<200>\E[?5l, fsl=\E8, home=\E[H, ht=\t, ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L, ind=\ED, invis=\E[8m, is1=\E[8;0|\E[?3;4;5;13;15l\E[13;20l\E[?7h\E[12h\E(B\E)0, is2=\E[0m^O, is3=\E(B\E)0, kbs=^H, kcbt=\E[Z, kclr=\E[2J, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[P, kdl1=\E[M, kend=\E[24;1H, kf1=\EOc, kf2=\EOd, kf3=\EOe, kf4=\EOf, kf5=\EOg, kf6=\EOh, kf7=\EOi, kf8=\EOj, kf9=\ENo, kf10=\ENp, kf11=\ENq, kf12=\ENr, kf13=\ENs, kf14=\ENt, kf15=\EOC, kf16=\EOD, kf17=\EOE, kf18=\EOF, kf19=\EOG, kf20=\EOH, kf21=\EOI, kf22=\EOJ, kf23=\ENO, kf24=\ENP, kf25=\ENQ, kf26=\ENR, kf27=\ENS, kf28=\ENT, kf29=\EOP, kf30=\EOQ, kf31=\EOR, kf32=\EOS, kf33=\EOw, kf34=\EOx, kf35=\EOy, kf36=\EOm, kf37=\EOt, kf38=\EOu, kf39=\EOv, kf40=\EOl, kf41=\EOq, kf42=\EOr, kf43=\EOs, kf44=\EOp, kf45=\EOn, kf46=\EOM, khome=\E[H, kil1=\E[L, kich1=\E[@, kpp=\E[V, knp=\E[U, kLFT=\E[ A, kRIT=\E[ @, ll=\E[24H, nel=\EE, pfxl=\E[%p1%d;%p2%l%02dq%?%p1%{9}%<%t F%p1%1d %;%p2%s, pln=\E[%p1%d;0;0;0q%p2%:-16.16s, rev=\E[7m, ri=\EM, rmacs=\E)B^O, rmir=\E[4l, rs2=\Ec\E[?3l, rc=\E8, rmso=\E[m, rmln=\E[2p, rmul=\E[m, sgr0=\E[m^O, sgr=\E[0%?%p6%t;1%;%?%p5%t;2%;%?%p2%t;4%;%?%p4%t;5%;%?%p3%p1%|%t;7%;%?%p7%t;8%;m%?%p9%t^N%e^O%;, smacs=\E)0^N, smir=\E[4h, smso=\E[7m, smul=\E[4m, smln=\E[p, sc=\E7, tsl=\E7\E[25;%i%p1%dx, tbc=\E[3g, fln=4\,4, hts=\EH, swidm=\E#6, mc0=\E[i, mc4=\E[?4i, mc5=\E[?5i, 605V2-w|605V2bct-w|ATT605V2-w|att605V2-w|AT&T 605V2-w 132 column 102 key keyboard @(#)605V2.ti 1.5, cols#132, is1=\E[8;0|\E[?4;5;13;15l\E[13;20l\E[?3;7h\E[12h\E(B\E)0, use=605V2, 610|610bct|ATT610|att610|AT&T 610; 80 column; 98key keyboard @(#)610.ti 1.8, am, xenl, hs, eslok, mir, msgr, xon, cols#80, it#8, lh#2, lines#24, lw#8, nlab#8, wsl#80, cbt=\E[Z, bel=^G, cr=^M, csr=\E[%i%p1%d;%p2%dr, clear=\E[H\E[J, el=\E[K, ed=\E[J, cup=\E[%i%p1%d;%p2%dH, cud1=\E[B, home=\E[H, civis=\E[?25l, cub1=^H, cnorm=\E[?25h\E[?12l, cuf1=\E[C, ll=\E[24H, cuu1=\E[A, cvvis=\E[?12;25h, dch1=\E[P, dl1=\E[M, smacs=^N, blink=\E[5m, bold=\E[1m, dim=\E[2m, smir=\E[4h, ich=\E[%p1%d@, invis=\E[8m, rev=\E[7m, smso=\E[7m, smul=\E[4m, rmacs=^O, sgr0=\E[m^O, rmir=\E[4l, rmso=\E[m, rmul=\E[m, flash=\E[?5h$<200>\E[?5l, fsl=\E8, is1=\E[8;0|\E[?3;4;5;13;15l\E[13;20l\E[?7h\E[12h\E(B\E)0, is2=\E[0m^O, is3=\E(B\E)0, il1=\E[L, kbs=^H, kclr=\E[2J, kcud1=\E[B, kf1=\EOc, kf2=\EOd, kf3=\EOe, kf4=\EOf, kf5=\EOg, kf6=\EOh, kf7=\EOi, kf8=\EOj, kf9=\ENo, kf10=\ENp, kf11=\ENq, kf12=\ENr, kf13=\ENs, kf14=\ENt, khome=\E[H, kcub1=\E[D, kcuf1=\E[C, kind=\E[S, kri=\E[T, kcuu1=\E[A, nel=\EE, dch=\E[%p1%dP, dl=\E[%p1%dM, cud=\E[%p1%dB, il=\E[%p1%dL, cub=\E[%p1%dD, cuf=\E[%p1%dC, cuu=\E[%p1%dA, pfxl=\E[%p1%d;%p2%l%02dq%?%p1%{9}%<%t F%p1%1d %;%p2%s, mc4=\E[?4i, mc5=\E[?5i, rs2=\Ec\E[?3l, rc=\E8, sc=\E7, ind=\ED, ri=\EM, sgr=\E[0%?%p6%t;1%;%?%p5%t;2%;%?%p2%t;4%;%?%p4%t;5%;%?%p3%p1%|%t;7%;%?%p7%t;8%;m%?%p9%t^N%e^O%;, ht=\t, tsl=\E7\E[25;%i%p1%dx, acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, pln=\E[%p1%d;0;0;0q%p2%:-16.16s, kcbt=\E[Z, smln=\E[p, rmln=\E[2p, kLFT=\E[ @, kRIT=\E[ A, el1=\E[1K, 610-w|610bct-w|ATT610-w|att610-w|AT&T 610; 132 column; 98key keyboard @(#)610.ti 1.8, cols#132, is1=\E[8;0|\E[?4;5;13;15l\E[13;20l\E[?3;7h\E[12h, wsl#132, use=610, 610-103k|610bct-103k|ATT610-103k|att610-103k|AT&T 610; 80 column; 103key keyboard @(#)610.ti 1.8, kf9@, kf10@, kf11@, kf12@, kf13@, kf14@, kdch1=\ENf, kdl1=\ENe, kel=\EOa, kich1=\ENj, krmir=\ENj, knp=\E[U, kpp=\E[V, kbeg=\E9, kcan=\EOw, kclo=\EOV, kcmd=\EOu, kcpy=\ENd, kcrt=\EOn, kend=\E0, kext=\EOk, kfnd=\EOx, khlp=\EOm, kmrk=\ENi, kmsg=\EOl, kmov=\ENc, knxt=\ENh, kopn=\EOv, kopt=\EOr, kprt=\EOz, kprv=\ENg, krdo=\EOt, kref=\EOb, krfr=\ENa, krpl=\EOy, krst=\EOB, kres=\EOq, ksav=\EOo, kspd=\EOp, kund=\EOs, kBEG=\ENB, kCAN=\EOW, kCMD=\EOU, kCPY=\END, kCRT=\EON, kDC=\ENF, kDL=\ENE, kslt=\ENI, kEND=\ENN, kEOL=\EOA, kEXT=\EOK, kFND=\EOX, kHLP=\EOM, kMSG=\EOL, kMOV=\ENC, kNXT=\ENH, kOPT=\EOR, kPRT=\EOZ, kPRV=\ENG, kRDO=\EOT, kRPL=\EOY, kRES=\EOQ, kSAV=\EOO, kSPD=\EOP, kUND=\EOS, use=610, 610-103k-w|610bct-103k-w|ATT610-103k-w|att610-103k-w|AT&T 610; 132 column; 103key keyboard @(#)610.ti 1.8, cols#132, is1=\E[8;0|\E[?4;5;13;15l\E[13;20l\E[?3;7h\E[12h, wsl#132, use=610-103k, 615|615mt|ATT615|att615|AT&T 615; 80 column; 98key keyboard @(#)615.ti 1.4, # add sequences for changing flow control setting smxon=\E[?21;29h, rmxon=\E[?21l, # modify initialization string font setting to match terminal on power-up is1=\E[8;0|\E[?3;4;5;13;15l\E[13;20l\E[?7h\E[12h\E(B\E)B, # add print screen not in previous versions of 615 MT mc0=\E[i, # add shifted HOME key kHOM=\ENM, kLFT=\E[ A, kRIT=\E[ @, kf15=\EOC, kf16=\EOD, kf17=\EOE, kf18=\EOF, kf19=\EOG, kf20=\EOH, kf21=\EOI, kf22=\EOJ, kf23=\ENO, kf24=\ENP, kf25=\ENQ, kf26=\ENR, kf27=\ENS, kf28=\ENT, kf29=\EOP, kf30=\EOQ, kf31=\EOR, kf32=\EOS, kf33=\EOw, kf34=\EOx, kf35=\EOy, kf36=\EOm, kf37=\EOt, kf38=\EOu, kf39=\EOv, kf40=\EOl, kf41=\EOq, kf42=\EOr, kf43=\EOs, kf44=\EOp, kf45=\EOn, kf46=\EOM, use=610, 615-w|615mt-w|ATT615-w|att615-w|AT&T 615; 132 column; 98key keyboard @(#)615.ti 1.4, # add sequences for changing flow control setting smxon=\E[?21;29h, rmxon=\E[?21l, # modify initialization string font setting to match terminal on power-up is1=\E[8;0|\E[?4;5;13;15l\E[13;20l\E[?3;7h\E[12h\E(B\E)B, # add print screen not in previous versions of 615 MT mc0=\E[i, # add shifted HOME key kHOM=\ENM, kLFT=\E[ A, kRIT=\E[ @, kf15=\EOC, kf16=\EOD, kf17=\EOE, kf18=\EOF, kf19=\EOG, kf20=\EOH, kf21=\EOI, kf22=\EOJ, kf23=\ENO, kf24=\ENP, kf25=\ENQ, kf26=\ENR, kf27=\ENS, kf28=\ENT, kf29=\EOP, kf30=\EOQ, kf31=\EOR, kf32=\EOS, kf33=\EOw, kf34=\EOx, kf35=\EOy, kf36=\EOm, kf37=\EOt, kf38=\EOu, kf39=\EOv, kf40=\EOl, kf41=\EOq, kf42=\EOr, kf43=\EOs, kf44=\EOp, kf45=\EOn, kf46=\EOM, use=610-w, 615-103k|615mt-103k|ATT615-103k|att615-103k|AT&T 615; 80 column; 103key keyboard @(#)615.ti 1.4, # add sequences for changing flow control setting smxon=\E[?21;29h, rmxon=\E[?21l, # modify initialization string font setting to match terminal on power-up is1=\E[8;0|\E[?3;4;5;13;15l\E[13;20l\E[?7h\E[12h\E(B\E)B, # add print screen not in previous versions of 615 MT mc0=\E[i, # remove shifted HOME key added for 615 with 98-key keyboard kHOM@, kLFT=\E[ A, kRIT=\E[ @, use=610-103k, 615-103k-w|615mt-103k-w|ATT615-103k-w|att615-103k-w|AT&T 615; 132 column; 103key keyboard @(#)615.ti 1.4, # add sequences for changing flow control setting smxon=\E[?21;29h, rmxon=\E[?21l, # modify initialization string font setting to match terminal on power-up is1=\E[8;0|\E[?4;5;13;15l\E[13;20l\E[?3;7h\E[12h\E(B\E)B, # add print screen not in previous versions of 615 MT mc0=\E[i, # remove shifted HOME key added for 615 with 98-key keyboard kHOM@, kLFT=\E[ A, kRIT=\E[ @, use=610-103k-w, # # AT&T 615CMT - Color Multitasking Terminal - default is 102 keyboard # 615CMT-102k|615cmt-102k|A615CMT-102k|a615CMT-102k|AT&T 615 CMT color multitasking terminal; 80 column; 102 key keyboard @(#)615CMT.ti 1.5, colors#8,pairs#64, # all attributes supported except protect # with bold mapped to cyan, dim to blue, and standout as for the 615 MT # # color terminfo escape sequence parameters # parameters foreground background # # black 0 30 40 # blue 1 34 44 # green 2 32 42 # cyan 3 36 46 # red 4 31 41 # magenta 5 35 45 # yellow 6 33 43 # white 7 37 47 # default - 39 49 # # initial color always white foreground on black background op=\E[37;40m, sgr0=\E[m^O, # set for foreground and background color variable setab=\E[4%p1%dm, setaf=\E[3%p1%dm, setf=\E[3%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%{7}%>%t9%e%p1%d%;m, setb=\E[4%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%{7}%>%t9%e%p1%d%;m, # # attribute terminfo parameter escape sequence parameter # none 0 0 # standout 1 7 (reverse) # underline 2 4 # reverse 3 7 # blink 4 5 # dim 5 34 (blue) # bold 6 36 (cyan) # invisible 7 8 # protect 8 not supported # altcharset 9 no sequence - SO for on, SI for off # # modify sgr from 615 MT for dim and bold sgr=\E[0%?%p6%t;36%;%?%p5%t;34%;%?%p2%t;4%;%?%p4%t;5%;%?%p3%p1%|%t;7%;%?%p7%t;8%;m%?%p9%t^N%e^O%;, bold=\E[36m, dim=\E[34m, # add keys for 102 key keyboard not on 98 key keyboard kdch1=\E[P, kdl1=\E[M, kend=\E[24;1H, kich1=\E[@, kil1=\E[L, knp=\E[U, kpp=\E[V, # remove key for 98 key keyboard not on 102 key keyboard kHOM@, # add sequences for changing flow control setting smxon=\E[?21;29h, rmxon=\E[?21l, # modify initialization string font setting is1=\E[8;0|\E[?3;4;5;13;15l\E[13;20l\E[?7h\E[12h\E(B\E)B, # add some enhancements not in previous versions for 615 MT mc0=\E[i, # all other controls are the same as the 615 MT use=att615, # # AT&T 615CMT - Color Multitasking Terminal - default is 98 keyboard # 615CMT-98k|615cmt-98k|A615CMT-98k|a615CMT-98k|AT&T 615 CMT color multitasking terminal; 80 column; 98 key keyboard @(#)615CMT.ti 1.5, kHOM=\ENM, kdch1@, kdl1@, kend@, kich1@, kil1@, knp@, kpp@, use=615CMT-102k, # # AT&T 615CMT - Color Multitasking Terminal - default is 102 keyboard # and wide columns # 615CMT-102k-w|615cmt-102k-w|A615CMT-102k-w|a615CMT-102k-w|AT&T 615 CMT color multitasking terminal; 132 column; 102 key keyboard @(#)615CMT.ti 1.5, cols#132, wsl#132, is1=\E[8;0|\E[?4;5;13;15l\E[13;20l\E[?3;7h\E[12h\E(B\E)B, use=615CMT-102k, # # AT&T 615CMT - Color Multitasking Terminal - default is 98 keyboard # and wide columns # 615CMT-98k-w|615cmt-98k-w|A615CMT-98k-w|a615CMT-98k-w|AT&T 615 CMT color multitasking terminal; 132 column; 98 key keyboard @(#)615CMT.ti 1.5, cols#132, wsl#132, is1=\E[8;0|\E[?4;5;13;15l\E[13;20l\E[?3;7h\E[12h\E(B\E)B, kHOM=\ENM, kdch1@, kdl1@, kend@, kich1@, kil1@, knp@, kpp@, use=615CMT-102k, 620|620mtg|ATT620|att620|AT&T 620; 80 column; 98key keyboard @(#)620.ti 1.8, am, xenl, hs, eslok, mir, msgr, xon, cols#80, it#8, lh#2, lines#24, lw#8, nlab#8, wsl#80, cbt=\E[Z, bel=^G, cr=^M, csr=\E[%i%p1%d;%p2%dr, clear=\E[H\E[J, el=\E[K, ed=\E[J, cup=\E[%i%p1%d;%p2%dH, cud1=\E[B, home=\E[H, civis=\E[?25l, cub1=^H, cnorm=\E[?25h\E[?12l, cuf1=\E[C, ll=\E[24H, cuu1=\E[A, cvvis=\E[?12;25h, dch1=\E[P, dl1=\E[M, smacs=^N, blink=\E[5m, bold=\E[1m, smir=\E[4h, ich=\E[%p1%d@, invis=\E[8m, rev=\E[7m, smso=\E[7m, smul=\E[4m, rmacs=^O, sgr0=\E[m^O, rmir=\E[4l, rmso=\E[m, rmul=\E[m, flash=\E[?5h$<200>\E[?5l, fsl=\E8, is1=\E[8;0|\E[?3;4;5;13;15l\E[13;20l\E[?7h\E[12h, is2=\E[0m^O, is3=\E(B\E)0, il1=\E[L, kbs=^H, kclr=\E[2J, kcud1=\E[B, kf1=\EOc, kf2=\EOd, kf3=\EOe, kf4=\EOf, kf5=\EOg, kf6=\EOh, kf7=\EOi, kf8=\EOj, kf9=\ENo, kf10=\ENp, kf11=\ENq, kf12=\ENr, kf13=\ENs, kf14=\ENt, kf15=\EOC, kf16=\EOD, kf17=\EOE, kf18=\EOF, kf19=\EOG, kf20=\EOH, kf21=\EOI, kf22=\EOJ, kf23=\ENO, kf24=\ENP, kf25=\ENQ, kf26=\ENR, kf27=\ENS, kf28=\ENT, kf29=\EOP, kf30=\EOQ, kf31=\EOR, kf32=\EOS, kf33=\EOw, kf34=\EOx, kf35=\EOy, kf36=\EOm, kf37=\EOt, kf38=\EOu, kf39=\EOv, kf40=\EOl, kf41=\EOq, kf42=\EOr, kf43=\EOs, kf44=\EOp, kf45=\EOn, kf46=\EOM, khome=\E[H, kcub1=\E[D, kcuf1=\E[C, kind=\E[S, kri=\E[T, kcuu1=\E[A, nel=\EE, dch=\E[%p1%dP, dl=\E[%p1%dM, cud=\E[%p1%dB, il=\E[%p1%dL, cub=\E[%p1%dD, cuf=\E[%p1%dC, cuu=\E[%p1%dA, pfxl=\E[%p1%d;%p2%l%02dq%?%p1%{9}%<%t F%p1%1d %;%p2%s, mc4=\E[?4i, mc5=\E[?5i, rs2=\Ec\E[?3l, rc=\E8, sc=\E7, ind=\ED, ri=\EM, sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p5%t;2%;%?%p3%p1%|%t;7%;%?%p7%t;8%;m%?%p9%t^N%e^O%;, ht=\t, tsl=\E7\E[25;%i%p1%dx, acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, pln=\E[%p1%d;0;0;0q%p2%:-16.16s, kcbt=\E[Z, smln=\E[p, rmln=\E[2p, kLFT=\E[ A, kRIT=\E[ @, el1=\E[1K, 620-w|620mtg-w|ATT620-w|att620-w|AT&T 620; 132 column; 98key keyboard @(#)620.ti 1.8, cols#132, is1=\E[8;0|\E[?4;5;13;15l\E[13;20l\E[?3;7h\E[12h, wsl#132, use=620, 620-103k|620mtg-103k|ATT620-103k|att620-103k|AT&T 620; 80 column; 103key keyboard @(#)620.ti 1.8, kf9@, kf10@, kf11@, kf12@, kf13@, kf14@, kf15@, kf16@, kf17@, kf18@, kf19@, kf20@, kf21@, kf22@, kf23@, kf24@, kf25@, kf26@, kf27@, kf28@, kf29@, kf30@, kf31@, kf32@, kf33@, kf34@, kf35@, kf36@, kf37@, kf38@, kf39@, kf40@, kf41@, kf42@, kf43@, kf44@, kf45@, kf46@, kdch1=\ENf, kdl1=\ENe, kel=\EOa, kich1=\ENj, krmir=\ENj, knp=\E[U, kpp=\E[V, kbeg=\E9, kcan=\EOw, kclo=\EOV, kcmd=\EOu, kcpy=\ENd, kcrt=\EOn, kend=\E0, kext=\EOk, kfnd=\EOx, khlp=\EOm, kmrk=\ENi, kmsg=\EOl, kmov=\ENc, knxt=\ENh, kopn=\EOv, kopt=\EOr, kprt=\EOz, kprv=\ENg, krdo=\EOt, kref=\EOb, krfr=\ENa, krpl=\EOy, krst=\EOB, kres=\EOq, ksav=\EOo, kspd=\EOp, kund=\EOs, kBEG=\ENB, kCAN=\EOW, kCMD=\EOU, kCPY=\END, kCRT=\EON, kDC=\ENF, kDL=\ENE, kslt=\ENI, kEND=\ENN, kEOL=\EOA, kEXT=\EOK, kFND=\EOX, kHLP=\EOM, kMSG=\EOL, kMOV=\ENC, kNXT=\ENH, kOPT=\EOR, kPRT=\EOZ, kPRV=\ENG, kRDO=\EOT, kRPL=\EOY, kRES=\EOQ, kSAV=\EOO, kSPD=\EOP, kUND=\EOS, use=620, 620-103k-w|620mtg-103k-w|ATT620-103k-w|att620-103k-w|AT&T 620; 132 column; 103key keyboard @(#)620.ti 1.8, cols#132, is1=\E[8;0|\E[?4;5;13;15l\E[13;20l\E[?3;7h\E[12h, wsl#132, use=620-103k, ############################################################## # # 630 terminfo # # 630|att630|5630|5630DMD|630MTG|AT&T 630 windowing terminal @(#)630.ti 1.5, am, da, db, mir, msgr, npc, xon, cols#80, it#8, lines#60, lm#0, # # short descriptions without \E # bel=^G, cr=\r, ht=\t, nel=\r\n, # # cursor movement # cuu1=\E[A, cud1=\E[B, cuf1=\E[C, cub1=\b, cuu=\E[%p1%dA, cud=\E[%p1%dB, cuf=\E[%p1%dC, cub=\E[%p1%dD, cup=\E[%i%p1%d;%p2%dH, home=\E[H, cbt=\E[Z, # # scrolling # ind=\ED, ri=\EM, indn=\E[%p1%dS, rin=\E[%p1%dT, # # character attributes # smul=\E[4m, rmul=\E[m, smso=\E[7m, rmso=\E[m, rev=\E[7m, sgr=\E[0%?%p2%t;4%;%?%p1%p3%|%p4%|%p5%|%t;7%;m, sgr0=\E[m, # # clear # el=\E[K, el1=\E[1K, ed=\E[J, clear=\E[H\E[J, # # insert/delete # dch1=\E[P, dl1=\E[M, il1=\E[L, dch=\E[%p1%dP, dl=\E[%p1%dM, il=\E[%p1%dL, ich=\E[%p1%d@, smir=\E[4h, rmir=\E[4l, # # pf string # pfx=\E[%p1%d;%p2%l%dq%p2%s, # # set/reset # sc=\E7, rc=\E8, is2=\E[m, rs2=\Ec, # # printer # mc4=\E[?4i, mc5=\E[?5i, # # keyboard definitions # kbs=\b, kclr=\E[2J, khome=\E[H, kcbt=\E[Z, kcuu1=\E[A, kcud1=\E[B, kcuf1=\E[C, kcub1=\E[D, kf9=\ENo, kf10=\ENp, kf11=\ENq, kf12=\ENr, kf13=\ENs, kf14=\ENt, # # the following keys are used only by the 122 key keyboard # kdch1=\E[P, kdl1=\E[M, kich1=\E[@, kil1=\E[L, kf15=\ENu, kf16=\ENv, kf17=\ENw, kf18=\ENx, kf19=\ENy, kf20=\ENz, kf21=\EN{, kf22=\EN|, kf23=\EN}, kf24=\EN~, 630-24|att630-24|5630-24|5630DMD-24|630MTG-24|AT&T 630 windowing terminal 24 lines @(#)630.ti 1.5, lines#24, use=630, 6300+|PC6300PLUS|pc6300plus|6300plus|6300PLUS|AT&T-IS PC 6300 PLUS Personal Computer @(#)6300+.ti 1.1, am, cols#80, lines#24, bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[2J\E[H, cr=\r, cub1=\b, cud1=\E[B, cuf1=\E[C, cup=\E[%i%p1%02d;%p2%02dH, cuu1=\E[A, dch1=\E[1P, dim=\E[2m, dl1=\E[1M, ed=\E[0J, el=\E[0K, home=\E[H, hts=\EH, ich1=\E[1@, il1=\E[1L, ind=\n, invis=\E[9m, kbs=\b, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf1=\EOc, kf10=\EOu, kf2=\EOd, kf3=\EOe, kf4=\EOf, kf5=\EOg, kf6=\EOh, kf7=\EOi, kf8=\EOj, kf9=\EOk, nel=\r\n, rev=\E[7m, rmso=\E[m, rmul=\E[m, smso=\E[7m, smul=\E[4m, tbc=\E[3g, 730|att730|730MTG|AT&T 730 windowing terminal Version @(#)730.ti 1.3, # has status line of 80 chars hs, wsl#80, tsl=\E7\E[;%i%p1%dx, # support \E on the status line (status_line_esc_ok) eslok, # screen dimension cols#80, lines#60, # label information lw#8, lh#2, nlab#24, rmln=\E[?13h, smln=\E[?13l, # mapping of alternate character set to ASCII acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, # change the scrolling region csr=\E[%i%p1%d;%p2%dr, # cursor visibility control civis=\E[?25l, cnorm=\E[?25h\E[?12l, cvvis=\E[?12;25h, # character set mode smacs=^N, rmacs=^O, am, da, db, xenl, mir, msgr, npc, xon, it#8, lm#0, # short descriptions without \E bel=^G, cr=^M, ht=\t, # cursor movement cud1=\E[B, cuf1=\E[C, cuu1=\E[A, cub1=^H, cud=\E[%p1%dB, cuu=\E[%p1%dA, cuf=\E[%p1%dC, cub=\E[%p1%dD, cup=\E[%i%p1%d;%p2%dH, home=\E[H, cbt=\E[Z, # scrolling ind=\ED, ri=\EM, # indn=\E[%p1%dS, # rin=\E[%p1%dT, # character attributes smul=\E[4m, rmul=\E[24m, smso=\E[7m, rmso=\E[27m, rev=\E[7m, sgr=\E[0%?%p6%t;1%;%?%p5%t;2%;%?%p2%t;4%;%?%p4%t;5%;%?%p3%p1%|%t;7%;%?%p7%t;8%;m%?%p9%t^N%e^O%;, sgr0=\E[m^O, # character attribute mode blink=\E[5m, bold=\E[1m, dim=\E[2m, invis=\E[8m, # line attribute swidm=\E#6, # clear el=\E[K, el1=\E[1K, ed=\E[J, clear=\E[H\E[J, # insert/delete dch1=\E[P, dl1=\E[M, il1=\E[L, dch=\E[%p1%dP, dl=\E[%p1%dM, il=\E[%p1%dL, ich=\E[%p1%d@, smir=\E[4h, rmir=\E[4l, # pf string # the escape sequences are different to program # system function keys 1-24 # shifted system function keys (numbers 25-48, but no label) # <25: ESC [ pf# ; string-length q 16-char-label up-to-8-char-str # >24: ESC [ pf#-24 ; string-length ; 0 ; 3 q up-to-8-char-str pfxl=\E[%?%p1%{25}%<%t%p1%e%p1%{24}%-%;%d;%p2%l%02d%?%p1%{25}%<%tq\s\s\sSYS\s\s\s\s\sF%p1%:-2d\s\s%e;0;3q%;%p2%s, # set/reset sc=\E7, rc=\E8, is2=\E[0m^O, rs2=\Ec\E[?3l, # printer mc0=\E[?19h\E[0i, mc4=\E[?4i, mc5=\E[?5i, # keyboard definition kich1=\E[@, kil1=\E[L, kbs=^H, kclr=\E[2J, khome=\E[H, kcbt=\E[Z, kcuu1=\E[A, kcud1=\E[B, kcuf1=\E[C, kcub1=\E[D, kf1=\EOc, kf2=\EOd, kf3=\EOe, kf4=\EOf, kf5=\EOg, kf6=\EOh, kf7=\EOi, kf8=\EOj, kf9=\ENo, kf10=\ENp, kf11=\ENq, kf12=\ENr, kf13=\ENs, kf14=\ENt, kf15=\ENu, kf16=\ENv, kf17=\ENw, kf18=\ENx, kf19=\ENy, kf20=\ENz, kf21=\EN{, kf22=\EN|, kf23=\EN}, kf24=\EN~, # the following keys are used for shifted system Fkeys kf25=\EOC, kf26=\EOD, kf27=\EOE, kf28=\EOF, kf29=\EOG, kf30=\EOH, kf31=\EOI, kf32=\EOJ, kf33=\ENO, kf34=\ENP, kf35=\ENQ, kf36=\ENR, kf37=\ENS, kf38=\ENT, kf39=\EOU, kf40=\EOV, kf41=\EOW, kf42=\EOX, kf43=\EOY, kf44=\EOZ, kf45=\EO[, kf46=\EO\s, kf47=\EO], kf48=\EO\^, flash=\E[?5h$<200>\E[?5l, fsl=\E8, is1=\E[8;0|\E[?3;4;5;13;15l\E[13;20l\E[?7h\E[12h\E(B\E)B, is3=\E(B\E)0, kind=\E[S, kri=\E[T, nel=\EE, pln=\E[%p1%d;0;0;0q%p2%:-16.16s, kLFT=\E[\s@, kRIT=\E[\sA, # add sequences for changing flow control setting smxon=\E[?21h, rmxon=\E[?21l, # add shifted HOME key kHOM=\E[2J, # repeat char rep=%p1%c\E[%p2%1%-$db, 730-41|att730-41|730MTG-41|AT&T 730-41 windowing terminal Version @(#)730.ti 1.3, lines#41, use=730, 730-24|att730-24|730MTG-24|AT&T 730-24 windowing terminal Version @(#)730.ti 1.3, lines#24, use=730, 730r|att730r|730MTGr|AT&T 730 rev video windowing terminal Version @(#)730.ti 1.3, flash=\E[?5l$<200>\E[?5h, is1=\E[8;0|\E[?3;4;13;15l\E[?5h\E[13;20l\E[?7h\E[12h\E(B\E)B, use=730, 730r-41|att730r-41|730MTG-41r|AT&T 730r-41 rev video windowing terminal Version @(#)730.ti 1.3, lines#41, use=730r, 730r-24|att730r-24|730MTGr-24|AT&T 730r-24 rev video windowing terminal Version @(#)730.ti 1.3, lines#24, use=730r, # # Info: # TERMINFO entry for the AT&T Unix PC 7300 # from escape(7) in Unix PC 7300 Manual. # Somewhat similar to a vt100-am (but different enough # to redo this from scratch.) # Info: # /*************************************************************** # * # * FONT LOADING PROGRAM FOR THE UNIX PC # * # * This routine loads a font defined in the file ALTFONT # * into font memory slot #1. Once the font has been loaded, # * it can be used as an alternative character set. # * # * The call to ioctl with the argument WIOCLFONT is the key # * to this routine. For more information, see window(7) in # * the PC 7300 documentation. # ***************************************************************/ # #include /* needed for strcpy call */ # #include /* needed for ioctl call */ # #define FNSIZE 60 /* font name size */ # #define ALTFONT "/usr/lib/wfont/special.8.ft" /* font file */ # /* # * The file /usr/lib/wfont/special.8.ft comes with the # * standard PC software. It defines a graphics character set # * similar to that of the Teletype 5425 terminal. To view # * this or other fonts in /usr/lib/wfont, use the command # * cfont . For further information on fonts see # * cfont(1) in the PC 7300 documentation. # */ # # struct altfdata /* structure for alt font data */ # { # short altf_slot; /* memory slot number */ # char altf_name[FNSIZE]; /* font name (file name) */ # }; # ldfont() # { # int wd; /* window in which altfont will be */ # struct altfdata altf; # altf.altf_slot=1; # strcpy(altf.altf_name,ALTFONT); # for (wd =1; wd < 12; wd++) { # ioctl(wd, WIOCLFONT,&altf); # } # } # 7300|unixpc|pc7300|PC7300|unix_pc|AT&T UNIX PC Model 7300 @(#)7300.ti 1.5, am, xon, cols#80, lines#24, bel=^G, bold=\E[7m, clear=\E[2J\E[H, cr=\r, cub=\E[%p1%dD, cub1=\b, cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, dim=\E[2m, dl=\E[%p1%dM, dl1=\E[M, ed=\E[0J, el=\E[0K, home=\E[H, il=\E[%p1%dL, il1=\E[L, ind=\n, kBEG=\ENB, kCAN=\EOW, kCMD=\EOU, kCPY=\END, kCRT=\EON, kDC=\ENF, kDL=\ENE, kEND=\ENN, kEOL=\EOA, kEXT=\EOK, kFND=\EOX, kHLP=\EOM, kHOM=\ENM, kIC=\ENJ, kLFT=\ENK, kMOV=\ENC, kMSG=\EOL, kNXT=\ENH, kOPT=\EOR, kPRT=\EOZ, kPRV=\ENG, kRDO=\EOT, kRES=\EOQ, kRIT=\ENL, kRPL=\EOY, kSAV=\EOO, kSPD=\EOP, kUND=\EOS, kbeg=\E9, kbs=\b, kcan=\EOw, kclo=\EOV, kclr=\E[J, kcmd=\EOu, kcpy=\ENd, kcrt=\EOn, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\ENf, kdl1=\ENe, kel=\EOa, kend=\E0, kext=\EOk, kf1=\EOc, kf2=\EOd, kf3=\EOe, kf4=\EOf, kf5=\EOg, kf6=\EOh, kf7=\EOi, kf8=\EOj, kfnd=\EOx, khlp=\EOm, khome=\E[H, kich1=\ENj, kind=\E[S, kmov=\ENc, kmrk=\ENi, kmsg=\EOl, knp=\E[U, knxt=\ENh, kopn=\EOv, kopt=\EOr, kpp=\E[V, kprt=\EOz, kprv=\ENg, krdo=\EOt, kref=\EOb, kres=\EOq, krfr=\ENa, kri=\E[T, krpl=\EOy, krst=\EOB, ksav=\EOo, kslt=\ENI, kspd=\EOp, kund=\EOs, nel=\EE, rev=\E[7m, ri=\EM, rmacs=\E[10m, rmso=\E[0m, rmul=\E[0m, sgr0=\E[0;10m, smacs=\E[11m, smso=\E[7m, smul=\E[4m, SYS75|sys75|AT&T System 75 Cartridge; 80 column; 98key keyboard @(#)SYS75.ti 1.2, am, xenl, hs, eslok, mir, msgr, xon, cols#80, it#8, lh#2, lines#24, lw#8, nlab#8, wsl#80, cbt=\E[Z, bel=^G, cr=^M, csr=\E[%i%p1%d;%p2%dr, clear=\E[H\E[J, el=\E[K, ed=\E[J, cup=\E[%i%p1%d;%p2%dH, cud1=\E[B, home=\E[H, civis=\E[?25l, cub1=^H, cnorm=\E[?25h\E[?12l, cuf1=\E[C, ll=\E[24H, cuu1=\E[A, cvvis=\E[?12;25h, dch1=\E[P, dl1=\E[M, smacs=^N, blink=\E[5m, bold=\E[1m, dim=\E[2m, smir=\E[4h, ich=\E[%p1%d@, invis=\E[8m, rev=\E[7m, smso=\E[7m, smul=\E[4m, rmacs=^O, sgr0=\E[m^O, rmir=\E[4l, rmso=\E[m, rmul=\E[m, flash=\E[?5h$<200>\E[?5l, fsl=\E8, is1=\E[8;0|\E[?3;4;5;13;15l\E[13;20l\E[?7h\E[12h\E(B\E)0, is2=\E[0m^O, is3=\E(B\E)0, il1=\E[L, kbs=^H, kcud1=\E[B, kf1=\EOc, kf2=\EOd, kf3=\EOe, kf4=\EOf, kf5=\EOg, kf6=\EOh, kf7=\EOi, kf8=\EOj, kf9=\ENo, kf10=\ENp, kf11=\ENq, kf12=\ENr, kf13=\ENs, kf14=\ENt, khome=\E[H, kcub1=\E[D, kcuf1=\E[C, kind=\E[S, kri=\E[T, kcuu1=\E[A, nel=\EE, dch=\E[%p1%dP, dl=\E[%p1%dM, cud=\E[%p1%dB, il=\E[%p1%dL, cub=\E[%p1%dD, cuf=\E[%p1%dC, cuu=\E[%p1%dA, rs2=\Ec\E[?3l, rc=\E8, sc=\E7, ind=\ED, ri=\EM, sgr=\E[0%?%p6%t;1%;%?%p5%t;2%;%?%p2%t;4%;%?%p4%t;5%;%?%p3%p1%|%t;7%;%?%p7%t;8%;m%?%p9%t^N%e^O%;, ht=\t, tsl=\E7\E[25;%i%p1%dx, acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, pln=\E[%p1%d;0;0;0p%p2%:-16.16s, kcbt=\E[Z, smln=\E?, rmln=\E<, el1=\E[1K, kclr=\E[J, pfxl=\E[%p1%d;%p2%l%02dp%?%p1%{9}%<%t F%p1%1d %;%p2%s, mc0=\E[?0i, mc4=\E[?8i, mc5=\E[?4i, kLFT=\ENK, kRIT=\ENL, kHOM=\ENM, hpa=\E[%p1%dG, SYS75-w|sys75-w|AT&T System 75 Cartridge; 132 column; 98key keyboard @(#)SYS75.ti 1.2, cols#132, is1=\E[8;0|\E[?4;5;13;15l\E[13;20l\E[?3;7h\E[12h, wsl#132, use=SYS75, SYS75-103k|sys75-103k|AT&T System 75 Cartridge; 80 column; 103key keyboard @(#)SYS75.ti 1.2, kf9@, kf10@, kf11@, kf12@, kf13@, kf14@, kdch1=\ENf, kdl1=\ENe, kel=\EOa, kich1=\ENj, krmir=\ENj, knp=\E[U, kpp=\E[V, kbeg=\E9, kcan=\EOw, kclo=\EOV, kcmd=\EOu, kcpy=\ENd, kcrt=\EOn, kend=\E0, kext=\EOk, kfnd=\EOx, khlp=\EOm, kmrk=\ENi, kmsg=\EOl, kmov=\ENc, knxt=\ENh, kopn=\EOv, kopt=\EOr, kprt=\EOz, kprv=\ENg, krdo=\EOt, kref=\EOb, krfr=\ENa, krpl=\EOy, krst=\EOB, kres=\EOq, ksav=\EOo, kspd=\EOp, kund=\EOs, kBEG=\ENB, kCAN=\EOW, kCMD=\EOU, kCPY=\END, kCRT=\EON, kDC=\ENF, kDL=\ENE, kslt=\ENI, kEND=\ENN, kEOL=\EOA, kEXT=\EOK, kFND=\EOX, kHLP=\EOM, kMSG=\EOL, kMOV=\ENC, kNXT=\ENH, kOPT=\EOR, kPRT=\EOZ, kPRV=\ENG, kRDO=\EOT, kRPL=\EOY, kRES=\EOQ, kSAV=\EOO, kSPD=\EOP, kUND=\EOS, use=SYS75, SYS75-103k-w|sys75-103k-w|AT&T System 75 Cartridge; 132 column; 103key keyboard @(#)SYS75.ti 1.2, cols#132, is1=\E[8;0|\E[?4;5;13;15l\E[13;20l\E[?3;7h\E[12h, wsl#132, use=SYS75-103k, blit|jerq|blit running teletype rom @(#)blit.ti 1.1, xon,cr=^M, ind=^J, bel=^G, am, ht=^I, it#8, ul, eo, cud1=^J, cuf1=\EC, cuu1=\EA, cub1=\ED, cols#87, lines#72, clear=^L, el=\EK, cup=\EY%p2%' '%+%c%p1%' '%+%c, il1=\EF!, dl1=\EE!, ich1=\Ef!, dch1=\Ee!, il=\EF%p1%' '%+%c, dl=\EE%p1%' '%+%c, ich=\Ef%p1%' '%+%c, dch=\Ee%p1%' '%+%c, kcuu1=\EA, kcud1=\EB, kcuf1=\EC, kcub1=\ED, kbs=^H, kf1=\Ex, kf2=\Ey, kf3=\Ez, cbblit|fixterm|blit running columbus code @(#)blit.ti 1.1, smso=\EU!, rmso=\EV!, smul=\EU", rmul=\EV", flash=\E^G, ed=\EJ, smir=\EQ, rmir=\ER, ich1@, cols#88, mc5=^R, mc4=^T, mc5p=\EP%p1%03d, use=blit, oblit|ojerq|first version of blit rom @(#)blit.ti 1.1, xon,cr=^M, cud1=^J, ind=^J, bel=^G, cols#88, lines#72, it#8, ht=^I, am, ul, eo, mir, il=\Ef%p1%' '%+%c, dl=\Ee%p1%' '%+%c, dl1=\EE, rmir=\ER, smir=\EQ, dch1=\EO, cub1=\ED, da, db, il1=\EF, ed=\EJ, el=\EK, clear=^L, cup=\EY%p2%' '%+%c%p1%' '%+%c, cuf1=\EC, cuu1=\EA, flash=\E^G, kbs=^H, # Info: # This is an old version of vitty reentered. It is used when # running the vitty program outside a blit layer. # blitlayer|vitty| @(#)blit.ti 1.1, cr=^M, cud1=^J, ind=^J, bel=^G, cols#87, lines#72, it#8, ht=^I, am, clear=^L, cup=\EY%p2%' '%+%c%p1%' '%+%c, el=\EK, il1=\EI, dl1=\ED, flash=\E^G, cuu1=^K, # Info: # # This is a generic terminal for the new AT&T terminals that is not # really for use by itself, but was created to help make the # support for the other new terminals easier by defining the # common entry fields only once. There are several things # that weren't defined here but were common to 2 or more terminal # entries because they were different in at least 2 of the other # entries (e.g. clear, cols, cud1, ht, ind, and lines). # Unfortunately the 4424 has almost completely different data # for the fields than what the newer ones have and so hasn't been # included as one of the terminals using this common entry. # attgeneric| AT&T generic terminal description @(#)generic.ti 1.2, am, hs, mir, msgr, xenl, xon, cols#80, it#8, lh#2, lines#24, lw#8, nlab#8, wsl#55, acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, bel=^G, blink=\E[5m, bold=\E[4;7m, cbt=\E[Z, clear=\E[H\E[J, cnorm=\E[12;0j, cr=\r, csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=\b, cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, cvvis=\E[12;1j, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m, dl=\E[%p1%dM, dl1=\E[M, ech=\E[%p1%ds\E[%p1%dD, ed=\E[J, el=\E[K, el1=\E[1K, enacs=\E(B\E)0, flash=\E[?5h$<200>\E[?5l, fsl=\E8, home=\E[H, ht=\t, hts=\EH, ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L, ind=\n, indn=\E[%p1%dE, invis=\E[8m, is1=\E<\E[?3l$<100>, is2=\E[0m^O\E[1;2;3;4;6l\E[12;13;14;20l\E[?6;97;99l\E[?7h\E[4i\Ex\E[25;1j\212, is3=\E[?5l, kbeg=\Et, kbs=\b, kcbt=\E[Z, kclr=\E[2J, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[P, kdl1=\E[M, kel=\E[2K, kend=\Ez, kent=\n, kf1=\EOc, kf2=\EOd, kf3=\EOe, kf4=\EOf, kf5=\EOg, kf6=\EOh, kf7=\EOi, kf8=\EOj, khome=\E[H, kich1=\E[4h, kil1=\E[L, kind=\E[T, kprt=\EOe, kri=\E[S, ll=\E[24H, mc0=\E[?2i, mc4=\E[?9i, mc5=\E[?4i, nel=\r\n, pfx=\E[%p1%d;%p2%l%02dq\s\s\sF%p1%1d\s\s\s\s\s\s\s\s\s\s\s%p2%s, pln=\E[%p1%d;0;0;0q%p2%:-16.16s, prot=\EV, rc=\E8, rev=\E[7m, ri=\EM, rin=\E[%p1%dF, rmacs=^O, rmir=\E[4l, rmkx=\E[21;0j, rmln=\E|, rmso=\E[m, rmul=\E[m, rs2=\Ec\E[?3l\E[2;0y, sc=\E7, sgr=\E[0%?%p1%p5%|%t;2%;%?%p2%p6%|%t;4%;%?%p4%t;5%;%?%p3%p1%|%p6%|%t;7%;%?%p7%t;8%;m%?%p9%t^N%e^O%;, sgr0=\E[m^O, smacs=^N, smir=\E[4h, smkx=\E[21;1j\E~, smln=\E~, smso=\E[2;7m, smul=\E[4m, tbc=\E[3g, tsl=\E7\E[25;%p1%{8}%+%dH, netty| @(#)netty.ti 1.2, smcup=\EC@\EI@\EU@\ER@\EW@\EP@\E{A\E[@\E#A\EXA, rmcup=\E{@\E#@\EX@, use=netty-Tabs, netty-vi| @(#)netty.ti 1.2, smcup=\EC@\EI@\EU@\ER@\EW@\EP@\E{A\E[A\E#B\EX@, rmcup=\E{@\E[@\E#@, use=netty-Tabs, netty-Tabs| @(#)netty.ti 1.2, am, hs, mir, msgr, it#8, acsc=jjkkllmmqqxx, bel=^G, cr=^M, clear=^L, el=\EZ, cup=\EY%p2%?%p2%{95}%>%t^A%{96}%-%;%' '%+%c%p1%?%p1%{95}%>%t^A%{96}%-%;%' '%+%c, home=\EY\s\s, cub1=^H, cud1=^J, cuu1=\EA, dch1=\Ed, dl1=\ED!, fsl=^A, smacs=\ECA, rmacs=\EC@, smcup=\EC@\EI@\EU@\ER@\EW@\EP@\E{A\E[@\EX@\E#C\EM@!!, rmcup=\E{@\E#@, smcup=\E{A, rmcup=\E{@, smir=\EIA, rmir=\EI@, smul=\EUA, rmul=\EU@, smso=\ERA, rmso=\ER@, sgr0=\EC@\EI@\EU@\ER@, il1=\EO!, is3=\EF@^A^XOE^A\EFA^A^XOF^A\EFB^A^XOG^A\EFC^A^XOH^A\EFD^A^XOI^A\EFE^A^XOJ^A\EFF^A^XOK^A\EFG^A^XOL^A\EFH^A^XOM^A\EFI^A^XON^A\EFK^A^XOO^A, kcud1=^XOB, kf1=^XOE, kf2=^XOF, kf3=^XOG, kf4=^XOH, kf5=^XOI, kf6=^XOJ, kf7=^XOK, kf8=^XOL, kclr=^XOM, khome=^XON, kll=^XOO, kcub1=^XOC, kcuf1=^XOD, kcuu1=^XOA, dl=\ED%p1%' '%+%c, indn=\ES%p1%' '%+%c, ind=\n, il=\EO%p1%' '%+%c, ht=\t, cols#80, lines#24, # Info: # wind=\Ev%p1%' '%+%c%p3%' '%+%c%p2%' '%+%c%p4%' '%+%c, loses bad # rev=^N, standout seems to work better # tsl=\Eb^A, # # The following Terminfo entry describes functions which are supported by # the AT&T 5430/pt505 terminal software version 2 and later. # # The following represents the screen layout along with the associated # bezel buttons for the 5430/pt505 terminal. The "kf" designations do # not appear on the screen but are shown to reference the bezel buttons. # The "CMD", "MAIL", and "REDRAW" buttons are shown in their approximate # position relative to the screen. # # # # +----------------------------------------------------------------+ # | | # XXXX | kf0 kf24 | XXXX # | | # | | # XXXX | kf1 kf23 | XXXX # | | # | | # XXXX | kf2 kf22 | XXXX # | | # | | # XXXX | kf3 kf21 | XXXX # | | # | | # XXXX | kf4 kf20 | XXXX # | | # | | # XXXX | kf5 kf19 | XXXX # | | # | | # XXXX | kf6 kf18 | XXXX # | | # | | # XXXX | | XXXX # | | # | | # +----------------------------------------------------------------+ # # XXXX XXXX XXXX XXXX XXXX XXXX XXXX XXXX XXXX XXXX # # Note: XXXX represents the screen buttons # CMD REDRAW # # MAIL # # Depression of the "CMD" key sends \E! (kcmd) # Depression of the "MAIL" key sends \E[26s (kf26) # "REDRAW" same as "REFRESH" (krfr) # # # "kf" functions adds carriage return to output string if terminal is in # 'new line' mode. # # The following are functions not covered in the table above: # # Set keyboard character (SKC): # # \EPn1;Pn2w # # Pn1= 0 Back Space key # Pn1= 1 Break key # Pn2= Program char (hex) # # Screen Definition (SDF): # # \E[Pn1;Pn2;Pn3;Pn4;Pn5t # # Pn1= Window number (1-39) # Pn2-Pn5= Y;X;Y;X coordinates # # Screen Selection (SSL): # # \E[Pnu # # Pn= Window number # # Set Terminal Modes (SM): # # \E[Pnh # # Pn= 3 Graphics mode # Pn= > Cursor blink # Pn= < Enter new line mode # Pn= = Enter reverse insert/replace mode # Pn= ? Enter no scroll mode # # Reset Terminal Mode (RM): # # \E[Pnl # # Pn= 3 Exit graphics mode # Pn= > Exit cursor blink # Pn= < Exit new line mode # Pn= = Exit reverse insert/replace mode # Pn= ? Exit no scroll mode # # Screen Status Report (SSR): # # \E[Pnp # # Pn= 0 Request current window number # Pn= 1 Request current window dimensions # # Device Status Report (DSR): # # \E[6n Request cursor position # # Call Status Report (CSR): # # \E[Pnv # # Pn= 0 Call failed # Pn= 1 Call successful # # Transparent Button String (TBS): # # \E[Pn1;Pn2;Pn3;{string # # Pn1= Button number to be loaded # Pn2= Character count of "string" # Pn3= Key mode being loaded: # 0= Unshifted # 1= Shifted # 2= Control # String= Text string (15 chars max) # # Screen Number Report (SNR): # # \E[Pnp # # Pn= Screen number # # Screen Dimension Report (SDR): # # \E[Pn1;Pn2r # # Pn1= Number of rows available in window # Pn2= Number of columns available in window # # Cursor Position Report (CPR): # # \E[Pn1;Pn2R # # Pn1= "Y" Position of cousor # Pn2= "X" Position of cursor # # Request Answer Back (RAB): # # \E[c # # Answer Back Response (ABR): # # \E[?;*;30;VSV # # *= 0 No printer available # *= 2 Printer available # V= Software version number # SV= Software sub version number # # Screen Alingment Aid: # # \En # # Bell (lower pitch): # # \E[x # # Dial Phone Number: # # \EPdstring\ # # string= Phone number to be dialed # # Set Phone Labels: # # \EPpstring\ # # string= Label for phone buttons # # Set Clock: # # \EPchour;minute;second\ # # Position Clock: # # \EPsY;X\ # # Y= "Y" coordinate # X= "X" coordinate # # Delete Clock: # # \Epr\ # # Programming The Function Buttons: # # \EPfPn;string\ # # Pn= Button number (00-06, 18-24) # (kf00-kf06, kf18-kf24) # # string= Text to sent on button depression # # Request For Local Directory Data: # # \EPp12;\ # # Local Directory Data to host: # # \EPp11;LOCAL...DIRECTORY...DATA\ # # Request for Local Directory Data in print format: # # \EPp13;\ # # Enable 'Prt on Line' mode: # # \022 (DC2) # # Disable 'Prt on Line' mode: # # \024 (DC4) # # # # 05-Aug-86 # # 505|pt505|5430|gs5430| AT&T Personal Terminal 505 or 5430 GETSET terminal @(#)pt505.ti 1.4, am, bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[2J\E[H, cnorm=\E[>l, cols#80, cr=\r, cub1=\E[D, cub=\E[%p1%dD, cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, cvvis=\E[>h, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[0J, el=\E[0K, el1=\E2K, home=\E[H, ht=\t, il=\E[%p1%dL, il1=\E[L, ind=\n, is1=\EPr\\E[0u\E[2J\E[0;0H\E[0m\E[3l\E[l\E[=l\E[?l, it#8, kbs=\b, kcmd=\E!, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf0=\E[00s, kf1=\E[01s, kf2=\E[02s, kf3=\E[03s, kf4=\E[04s, kf5=\E[05s, kf6=\E[06s, kf18=\E[18s, kf19=\E[19s, kf20=\E[20s, kf21=\E[21s, kf22=\E[22s, kf23=\E[23s, kf24=\E24s, kf26=\E26s, krfr=\E[27s, lines#24, mc4=\E[4i, mc5=\E[5i, rc=\E8, rev=\E[7m, rmacs=\E[10m, rmir=\E[4l, rmso=\E[0m, rmul=\E[0m, rs1=\Ec, sc=\E7, sgr0=\E[0m, smacs=\E[11m, smir=\E[4h, smso=\E[1m, smul=\E[4m, xon, rmam=\E[11;1j, smam=\E[11;0j, # # The following Terminfo entry describes functions which are supported by # the AT&T 5430/pt505 terminal software version 1. # # The following represents the screen layout along with the associated # bezel buttons for the 5430/pt505 terminal. The "kf" designations do # not appear on the screen but are shown to reference the bezel buttons. # The "CMD", "MAIL", and "REDRAW" buttons are shown in their approximate # position relative to the screen. # # # # +----------------------------------------------------------------+ # | | # XXXX | kf0 kf24 | XXXX # | | # | | # XXXX | kf1 kf23 | XXXX # | | # | | # XXXX | kf2 kf22 | XXXX # | | # | | # XXXX | kf3 kf21 | XXXX # | | # | | # XXXX | kf4 kf20 | XXXX # | | # | | # XXXX | kf5 kf19 | XXXX # | | # | | # XXXX | kf6 kf18 | XXXX # | | # | | # XXXX | | XXXX # | | # | | # +----------------------------------------------------------------+ # # XXXX XXXX XXXX XXXX XXXX XXXX XXXX XXXX XXXX XXXX # # Note: XXXX represents the screen buttons # CMD REDRAW # # MAIL # # Depression of the "CMD" key sends \E! (kcmd) # Depression of the "MAIL" key sends (note) (kf26) # "REDRAW" same as "REFRESH" (krfr) (note) # # note: The character string sent by key 'kf26' may be user programmable # to send either \E[16s, or \E[26s. # The character string sent by key 'krfr' may be user programmable # to send either \E[17s, or \E[27s. # # "kf" functions adds carriage return to output string if terminal is in # 'new line' mode. # # The following are functions not covered in the table above: # # Set keyboard character (SKC): # # \EPn1;Pn2w # # Pn1= 0 Back Space key # Pn1= 1 Break key # Pn2= Program char (hex) # # Screen Definition (SDF): # # \E[Pn1;Pn2;Pn3;Pn4;Pn5t # # Pn1= Window number (1-39) # Pn2-Pn5= Y;X;Y;X coordinates # # Screen Selection (SSL): # # \E[Pnu # # Pn= Window number # # Set Terminal Modes (SM): # # \E[Pnh # # Pn= 3 Graphics mode # Pn= > Cursor blink # Pn= < Enter new line mode # Pn= = Enter reverse insert/replace mode # Pn= ? Enter no scroll mode # # Reset Terminal Mode (RM): # # \E[Pnl # # Pn= 3 Exit graphics mode # Pn= > Exit cursor blink # Pn= < Exit new line mode # Pn= = Exit reverse insert/replace mode # Pn= ? Exit no scroll mode # # Screen Status Report (SSR): # # \E[Pnp # # Pn= 0 Request current window number # Pn= 1 Request current window dimensions # # Device Status Report (DSR): # # \E[6n Request cursor position # # Call Status Report (CSR): # # \E[Pnv # # Pn= 0 Call failed # Pn= 1 Call successful # # Transparent Button String (TBS): # # \E[Pn1;Pn2;Pn3;{string # # Pn1= Button number to be loaded # Pn2= Character count of "string" # Pn3= Key mode being loaded: # 0= Unshifted # 1= Shifted # 2= Control # String= Text string (15 chars max) # # Screen Number Report (SNR): # # \E[Pnp # # Pn= Screen number # # Screen Dimension Report (SDR): # # \E[Pn1;Pn2r # # Pn1= Number of rows available in window # Pn2= Number of columns available in window # # Cursor Position Report (CPR): # # \E[Pn1;Pn2R # # Pn1= "Y" Position of cousor # Pn2= "X" Position of cursor # # Request Answer Back (RAB): # # \E[c # # Answer Back Response (ABR): # # \E[?;0;30;VSV # # V= Software version number # SV= Software sub version number # # Screen Alingment Aid: # # \En # # Bell (lower pitch): # # \E[x # # Dial Phone Number: # # \EPdstring\ # # string= Phone number to be dialed # # Set Phone Labels: # # \EPpstring\ # # string= Label for phone buttons # # Set Clock: # # \EPchour;minute;second\ # # Position Clock: # # \EPsY;X\ # # Y= "Y" coordinate # X= "X" coordinate # # Delete Clock: # # \Epr\ # # Programming The Function Buttons: # # \EPfPn;string\ # # Pn= Button number (00-06, 18-24) # (kf00-kf06, kf18-kf24) # # string= Text to sent on button depression # # # # 05-Aug-86 # # 505-24|pt505-24|5430-24|gs5430-24| AT&T PT505 or 5430 GETSET version 1 24 lines @(#)pt505v1.ti 1.2, am, bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[2J\E[H, cnorm=\E[>l, cols#80, cr=\r, cub1=\E[D, cub=\E[%p1%dD, cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, cvvis=\E[>h, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[0J, el=\E[0K, el1=\E2K, home=\E[H, ht=\t, il=\E[%p1%dL, il1=\E[L, ind=\n, is1=\EPr\\E[0u\E[2J\E[0;0H\E[0m\E[3l\E[l\E[=l\E[?l, it#8, kbs=\b, kcmd=\E!, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf0=\E[00s, kf1=\E[01s, kf2=\E[02s, kf3=\E[03s, kf4=\E[04s, kf5=\E[05s, kf6=\E[06s, kf18=\E[18s, kf19=\E[19s, kf20=\E[20s, kf21=\E[21s, kf22=\E[22s, kf23=\E[23s, kf24=\E24s, kf26=\E26s, krfr=\E[27s, lines#24, rev=\E[7m, rmacs=\E[10m, rmir=\E[4l, rmso=\E[0m, rmul=\E[0m, rs1=\Ec, sgr0=\E[0m, smacs=\E[11m, smir=\E[4h, smso=\E[1m, smul=\E[4m, xon, 505-22|pt505-22|5430-22|gs5430-22| AT&T PT505 or 5430 GETSET version 1 22 lines @(#)pt505v1.ti 1.2, lines#22, use=5430-24, # Reconstructed via infocmp from file: /usr/lib/terminfo/7/705 705c|ATT705C|att705c|4000awtc|AT&T 705 Color 24x80 column display w/102key keyboard @(#)705.ti 1.3, am, da, db, eslok, hs, mir, msgr, xenl, xon, colors#8, cols#80, lh#2, lines#24, lm#0, lw#8, pairs#64, nlab#8, wsl#80, acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, bel=^G, blink=\E[5m, bold=\E[36m, cbt=\E[Z, civis=\E[?25l, clear=\E[H\E[J, cnorm=\E[?25h\E[?12l, cr=\r, csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=\b, cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, cvvis=\E[?12;25h, dch=\E[%p1%dP, dch1=\E[P, dim=\E[34m, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K, enacs=\E(B\E)0, flash=\E[?5h$<200>\E[?5l, fln=4\,4, fsl=\E8, home=\E[H, ht=\t, hts=\EH, ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L, ind=\ED, invis=\E[8m, is2=\E[50;4|\E[53;0|\E[8;0|\E[?4;13;15l\E[13;20l\E[?7h\E[12h\E(B\E)0\E[?31l\E[0m^O, is3=\E(B\E)0, kLFT=\E[\sA, kRIT=\E[\s@, kbs=\b, kcbt=\E[Z, kclr=\E[2J, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[P, kdl1=\E[M, kend=\E[24;1H, kf1=\EOc, kf10=\ENp, kf11=\ENq, kf12=\ENr, kf13=\ENs, kf14=\ENt, kf15=\EOC, kf16=\EOD, kf17=\EOE, kf18=\EOF, kf19=\EOG, kf2=\EOd, kf20=\EOH, kf21=\EOI, kf22=\EOJ, kf23=\ENO, kf24=\ENP, kf25=\ENQ, kf26=\ENR, kf27=\ENS, kf28=\ENT, kf29=\EOP, kf3=\EOe, kf30=\EOQ, kf31=\EOR, kf32=\EOS, kf33=\EOw, kf34=\EOx, kf35=\EOy, kf36=\EOm, kf37=\EOt, kf38=\EOu, kf39=\EOv, kf4=\EOf, kf40=\EOl, kf41=\EOq, kf42=\EOr, kf43=\EOs, kf44=\EOp, kf45=\EOn, kf46=\EOM, kf5=\EOg, kf6=\EOh, kf7=\EOi, kf8=\EOj, kf9=\ENo, khome=\E[H, kich1=\E[@, kil1=\E[L, knp=\E[U, kpp=\E[V, ll=\E[24H, mc0=\E[i, mc4=\E[?4i, mc5=\E[?5i, nel=\EE, op=\E[37;40m, pfx=\E[%p1%d;%p2%l%02d;0;4q%p2%s, pln=\E[%p1%d;0;0;0q%p2%:-16.16s, rc=\E8, rep=%p1%c\E[%p2%{1}%-%db, rev=\E[7m, ri=\EM, rmacs=^O, rmir=\E[4l, rmln=\E[2p, rmso=\E[27m, rmul=\E[24m, rmxon=\E[53;3|, rs1=\Ec\E[?3;5l\E[56;0|, s0ds=\E[%p1%d;%p2%l%02d;0;0q%p3%:-16.16s%p2%s, sc=\E7, setab=\E[4%p1%dm, setaf=\E[3%p1%dm, setb=\E[4%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%{7}%>%t9%e%p1%d%;m, setf=\E[3%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%{7}%>%t9%e%p1%d%;m, sgr=\E[0%?%p6%t;36%;%?%p5%t;34%;%?%p2%t;4%;%?%p4%t;5%;%?%p3%p1%|%t;7%;%?%p7%t;8%;m%?%p9%t^N%e^O%;, sgr0=\E[m^O, smacs=^N, smir=\E[4h, smln=\E[p, smso=\E[7m, smul=\E[4m, smxon=\E[53;0|, tbc=\E[3g, tsl=\E7\E[99;%i%p1%dx, # # xterm: terminal emulator for XWIN system. # xtermm|xterm terminal emulator (monocrome) @(#)xterm.ti 1.3, am, km, mir, msgr, xenl, cols#80, it#8, lines#24, btns#3, acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, bel=^G, blink=@, bold=\E[1m, clear=\E[H\E[2J, cr=\r, csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=\E[1D, cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K$<3>, enacs=\E(B\E)0, home=\E[H, ht=\t, hts=\EH, ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=\n, ka1=\EOq, ka3=\EOs, kb2=\EOr, kbs=\b, kc1=\EOp, kc3=\EOn, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kent=\EOM, kend=\E[Y, khome=\E[H, knp=\E[U, kpp=\E[V, kf0=\EOy, kf1=\EOP, kf10=\EOY, kf11=\EOZ, kf12=\EOA, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf5=\EOT, kf6=\EOU, kf7=\EOV, kf8=\EOW, kf9=\EOX, rc=\E8, rev=\E[7m, ri=\EM, rmacs=^O, rmcup=\E[2J\E[?47l\E8, rmso=\E[m, rs1=\E>\E[1;3;4;5;6l\E[?7h\E[m\E[r\E[2J\E[H, rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7, sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t^N%e^O%;, sgr0=\E[m^O, smacs=^N, smcup=\E7\E[?47h, smso=\E[7m, tbc=\E[3g, getm=\E[%p1%dY, kmous=\E[^_, reqmp=\E[492Z, smkx=\E[?1h\E=, rmkx=\E[?1l\E>, # # color xterm # xtermc|xterm-color|xterm terminal emulator (color) @(#)xterm.ti 1.3, colors#8, ncv#7, pairs#64, op=\E[100m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm, setb=\E[4%?%p1%{1}%=%t4 %e%p1%{3}%=%t6 %e%p1%{4}%=%t1 %e%p1%{6}%=%t3 %e%p1%d%;m, setf=\E[3%?%p1%{1}%=%t4 %e%p1%{3}%=%t6 %e%p1%{4}%=%t1 %e%p1%{6}%=%t3 %e%p1%d%;m, use=xtermm,