% Testing OpenJDK ## Using the run-test framework This new way of running tests is developer-centric. It assumes that you have built a jdk locally and want to test it. Running common test targets is simple, and more complex ad-hoc combination of tests is possible. The user interface is forgiving, and clearly report errors it cannot resolve. Some example command-lines: $ make run-test-tier1 $ make run-test-jdk_lang JTREG="JOBS=8" $ make run-test TEST=jdk_lang $ make run-test-only TEST="gtest:LogTagSet gtest:LogTagSetDescriptions" GTEST="REPEAT=-1" $ make run-test TEST="hotspot/test:hotspot_gc" JTREG="JOBS=1;TIMEOUT=8;VM_OTIONS=-XshowSettings -Xlog:gc+ref=debug" $ make run-test TEST="jtreg:hotspot/test:hotspot_gc hotspot/test/native_sanity/JniVersion.java" ## Test selection All functionality is available using the run-test make target. In this use case, the test or tests to be executed is controlled using the `TEST` variable. To speed up subsequent test runs with no source code changes, run-test-only can be used instead, which do not depend on the source and test image build. For some common top-level tests, direct make targets have been generated. This includes all JTreg test groups, the hotspot gtest, and custom tests (if present). This means that `make run-test-tier1` is equivalent to `make run-test TEST="tier1"`, but the latter is more tab-completion friendly. For more complex test runs, the `run-test TEST="x"` solution needs to be used. The test specifications given in `TEST` is parsed into fully qualified test descriptors, which clearly and unambigously show which tests will be run. As an example, `:tier1` will expand to `jtreg:jdk/test:tier1 jtreg:langtools/test:tier1 jtreg:nashorn/test:tier1 jtreg:jaxp/test:tier1`. You can always submit a list of fully qualified test descriptors in the `TEST` variable if you want to shortcut the parser. ### JTreg JTreg test groups can be specified either without a test root, e.g. `:tier1` (or `tier1`, the initial colon is optional), or with, e.g. `hotspot/test:tier1`, `jdk/test:jdk_util`. When specified without a test root, all matching groups from all tests roots will be added. Otherwise, only the group from the specified test root will be added. Individual JTreg tests or directories containing JTreg tests can also be specified, like `hotspot/test/native_sanity/JniVersion.java` or `hotspot/test/native_sanity`. You can also specify an absolute path, to point to a JTreg test outside the source tree. As long as the test groups or test paths can be uniquely resolved, you do not need to enter the `jtreg:` prefix. If this is not possible, or if you want to use a fully qualified test descriptor, add `jtreg:`, e.g. `jtreg:hotspot/test/native_sanity`. ### Gtest Since the Hotspot Gtest suite is so quick, the default is to run all tests. This is specified by just `gtest`, or as a fully qualified test descriptor `gtest:all`. If you want, you can single out an individual test or a group of tests, for instance `gtest:LogDecorations` or `gtest:LogDecorations.level_test_vm`. This can be particularly useful if you want to run a shaky test repeatedly. ## Test results and summary At the end of the test run, a summary of all tests run will be presented. This will have a consistent look, regardless of what test suites were used. This is a sample summary: ============================== Test summary ============================== TEST TOTAL PASS FAIL ERROR >> jtreg:jdk/test:tier1 1867 1865 2 0 << jtreg:langtools/test:tier1 4711 4711 0 0 jtreg:nashorn/test:tier1 133 133 0 0 ============================== TEST FAILURE Tests where the number of TOTAL tests does not equal the number of PASSed tests will be considered a test failure. These are marked with the `>> ... <<` marker for easy identification. The classification of non-passed tests differs a bit between test suites. In the summary, ERROR is used as a catch-all for tests that neither passed nor are classified as failed by the framework. This might indicate test framework error, timeout or other problems. In case of test failures, `make run-test` will exit with a non-zero exit value. All tests have their result stored in `build/$BUILD/test-result/$TEST_ID`, where TEST_ID is a path-safe conversion from the fully qualified test descriptor, e.g. for `jtreg:jdk/test:tier1` the TEST_ID is `jtreg_jdk_test_tier1`. This path is also printed in the log at the end of the test run. Additional work data is stored in `build/$BUILD/test-support/$TEST_ID`. For some frameworks, this directory might contain information that is useful in determining the cause of a failed test. ## Test suite control It is possible to control various aspects of the test suites using make control variables. These variables use a keyword=value approach to allow multiple values to be set. So, for instance, `JTREG="JOBS=1;TIMEOUT=8"` will set the JTreg concurrency level to 1 and the timeout factor to 8. This is equivalent to setting `JTREG_JOBS=1 JTREG_TIMEOUT=8`, but using the keyword format means that the `JTREG` variable is parsed and verified for correctness, so `JTREG="TMIEOUT=8"` would give an error, while `JTREG_TMIEOUT=8` would just pass unnoticed. To separate multiple keyword=value pairs, use `;` (semicolon). Since the shell normally eats `;`, the recommended usage is to write the assignment inside qoutes, e.g. `JTREG="...;..."`. This will also make sure spaces are preserved, as in `JTREG="VM_OTIONS=-XshowSettings -Xlog:gc+ref=debug"`. (Other ways are possible, e.g. using backslash: `JTREG=JOBS=1\;TIMEOUT=8`. Also, as a special technique, the string `%20` will be replaced with space for certain options, e.g. `JTREG=VM_OTIONS=-XshowSettings%20-Xlog:gc+ref=debug`. This can be useful if you have layers of scripts and have trouble getting proper quoting of command line arguments through.) As far as possible, the names of the keywords have been standardized between test suites. ### JTreg keywords #### JOBS The test concurrency (`-concurrency`). Defaults to TEST_JOBS (if set by `--with-test-jobs=`), otherwise it defaults to JOBS, except for Hotspot, where the default is *number of CPU cores/2*, but never more than 12. #### TIMEOUT The timeout factor (`-timeoutFactor`). Defaults to 4. #### TEST_MODE The test mode (`-agentvm`, `-samevm` or `-othervm`). Defaults to `-agentvm`. #### ASSERT Enable asserts (`-ea -esa`, or none). Set to `true` or `false`. If true, adds `-ea -esa`. Defaults to true, except for hotspot. #### VERBOSE The verbosity level (`-verbose`). Defaults to `fail,error,summary`. #### RETAIN What test data to retain (`-retain`). Defaults to `fail,error`. #### MAX_MEM Limit memory consumption (`-Xmx` and `-vmoption:-Xmx`, or none). Limit memory consumption for JTreg test framework and VM under test. Set to 0 to disable the limits. Defaults to 512m, except for hotspot, where it defaults to 0 (no limit). #### OPTIONS Additional options to the JTreg test framework. Use `JTREG="OPTIONS=--help all"` to see all available JTreg options. #### JAVA_OPTIONS Additional Java options to JTreg (`-javaoption`). #### VM_OPTIONS Additional VM options to JTreg (`-vmoption`). ### Gtest keywords #### REPEAT The number of times to repeat the tests (`--gtest_repeat`). Default is 1. Set to -1 to repeat indefinitely. This can be especially useful combined with `OPTIONS=--gtest_break_on_failure` to reproduce an intermittent problem. #### OPTIONS Additional options to the Gtest test framework. Use `GTEST="OPTIONS=--help"` to see all available Gtest options. --- # Override some definitions in the global css file that are not optimal for # this document. header-includes: - '' ---