# Makefile.in generated by automake 1.9.6 from Makefile.am. # docs/Makefile. Generated from Makefile.in by configure. # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, # 2003, 2004, 2005 Free Software Foundation, Inc. # This Makefile.in is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY, to the extent permitted by law; without # even the implied warranty of MERCHANTABILITY or FITNESS FOR A # PARTICULAR PURPOSE. #*************************************************************************** # _ _ ____ _ # Project ___| | | | _ \| | # / __| | | | |_) | | # | (__| |_| | _ <| |___ # \___|\___/|_| \_\_____| # # Copyright (C) 1998 - 2011, Daniel Stenberg, , et al. # # This software is licensed as described in the file COPYING, which # you should have received as part of this distribution. The terms # are also available at http://curl.haxx.se/docs/copyright.html. # # You may opt to use, copy, modify, merge, publish, distribute and/or sell # copies of the Software, and permit persons to whom the Software is # furnished to do so, under the terms of the COPYING file. # # This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY # KIND, either express or implied. # ########################################################################### srcdir = . top_srcdir = .. pkgdatadir = $(datadir)/curl pkglibdir = $(libdir)/curl pkgincludedir = $(includedir)/curl top_builddir = .. am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd INSTALL = /usr/bin/install -c install_sh_DATA = $(install_sh) -c -m 644 install_sh_PROGRAM = $(install_sh) -c install_sh_SCRIPT = $(install_sh) -c INSTALL_HEADER = $(INSTALL_DATA) transform = $(program_transform_name) NORMAL_INSTALL = : PRE_INSTALL = : POST_INSTALL = : NORMAL_UNINSTALL = : PRE_UNINSTALL = : POST_UNINSTALL = : build_triplet = i386-pc-linux-gnu host_triplet = mipsel-unknown-linux-gnu subdir = docs DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in INSTALL \ THANKS TODO ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 am__aclocal_m4_deps = $(top_srcdir)/m4/curl-compilers.m4 \ $(top_srcdir)/m4/curl-confopts.m4 \ $(top_srcdir)/m4/curl-functions.m4 \ $(top_srcdir)/m4/curl-openssl.m4 \ $(top_srcdir)/m4/curl-override.m4 \ $(top_srcdir)/m4/curl-reentrant.m4 \ $(top_srcdir)/m4/curl-system.m4 $(top_srcdir)/m4/libtool.m4 \ $(top_srcdir)/m4/ltoptions.m4 $(top_srcdir)/m4/ltsugar.m4 \ $(top_srcdir)/m4/ltversion.m4 $(top_srcdir)/m4/lt~obsolete.m4 \ $(top_srcdir)/m4/xc-translit.m4 $(top_srcdir)/acinclude.m4 \ $(top_srcdir)/configure.ac am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ $(ACLOCAL_M4) mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs CONFIG_HEADER = $(top_builddir)/lib/curl_config.h \ $(top_builddir)/src/curl_config.h \ $(top_builddir)/include/curl/curlbuild.h CONFIG_CLEAN_FILES = depcomp = am__depfiles_maybe = SOURCES = DIST_SOURCES = RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \ html-recursive info-recursive install-data-recursive \ install-exec-recursive install-info-recursive \ install-recursive installcheck-recursive installdirs-recursive \ pdf-recursive ps-recursive uninstall-info-recursive \ uninstall-recursive man1dir = $(mandir)/man1 am__installdirs = "$(DESTDIR)$(man1dir)" MANS = $(man_MANS) ETAGS = etags CTAGS = ctags DIST_SUBDIRS = $(SUBDIRS) DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) ACLOCAL = ${SHELL} "/home/perry/project/WNDR4500/src/curl-7.23.1/missing" --run aclocal-1.9 AMDEP_FALSE = # AMDEP_TRUE = AMTAR = ${SHELL} "/home/perry/project/WNDR4500/src/curl-7.23.1/missing" --run tar AR = mipsel-uclibc-linux26-ar AS = mipsel-uclibc-linux26-as AUTOCONF = ${SHELL} "/home/perry/project/WNDR4500/src/curl-7.23.1/missing" --run autoconf AUTOHEADER = ${SHELL} "/home/perry/project/WNDR4500/src/curl-7.23.1/missing" --run autoheader AUTOMAKE = ${SHELL} "/home/perry/project/WNDR4500/src/curl-7.23.1/missing" --run automake-1.9 AWK = gawk BUILD_LIBHOSTNAME_FALSE = BUILD_LIBHOSTNAME_TRUE = # BUILD_UNITTESTS_FALSE = BUILD_UNITTESTS_TRUE = # CC = mipsel-uclibc-linux26-gcc CCDEPMODE = depmode=gcc3 CFLAGS = -g0 -O2 -Wno-system-headers CONFIGURE_OPTIONS = " '--target=mipsel-linux' '--host=mipsel-linux' '--build=i386-pc-linux-gnu' '--prefix=/home/perry/project/WNDR4500/src/curl-7.23.1/tmp' '--exec-prefix=/home/perry/project/WNDR4500/src/curl-7.23.1/tmp' '--disable-manual' '--disable-proxy' '--without-zlib' '--disable-cookies' '--disable-ipv6' '--disable-shared' '--disable-dict' '--disable-file' '--disable-ftp' '--disable-gopher' '--disable-imap' '--disable-pop3' '--disable-smtp' '--disable-telnet' '--disable-tftp' '--disable-rtsp' 'build_alias=i386-pc-linux-gnu' 'host_alias=mipsel-linux' 'target_alias=mipsel-linux' 'CC=mipsel-uclibc-linux26-gcc'" CPP = mipsel-uclibc-linux26-gcc -E CPPFLAGS = CROSSCOMPILING_FALSE = # CROSSCOMPILING_TRUE = CURLDEBUG_FALSE = CURLDEBUG_TRUE = # CURLVERSION = 7.23.1 CURL_CA_BUNDLE = "/etc/ssl/certs/ca-certificates.crt" CURL_CFLAG_EXTRAS = CURL_DISABLE_DICT = 1 CURL_DISABLE_FILE = 1 CURL_DISABLE_FTP = 1 CURL_DISABLE_GOPHER = 1 CURL_DISABLE_HTTP = CURL_DISABLE_IMAP = 1 CURL_DISABLE_LDAP = 1 CURL_DISABLE_LDAPS = 1 CURL_DISABLE_POP3 = 1 CURL_DISABLE_PROXY = 1 CURL_DISABLE_RTSP = 1 CURL_DISABLE_SMTP = 1 CURL_DISABLE_TELNET = 1 CURL_DISABLE_TFTP = 1 CURL_LIBS = CURL_NETWORK_LIBS = CYGPATH_W = echo DEFS = -DHAVE_CONFIG_H DEPDIR = .deps DLLTOOL = dlltool DSYMUTIL = DUMPBIN = ECHO_C = ECHO_N = -n ECHO_T = EGREP = /bin/grep -E ENABLE_SHARED = no EXEEXT = FGREP = /bin/grep -F GREP = /bin/grep HAVE_GNUTLS_SRP = HAVE_LDAP_SSL = 1 HAVE_LIBZ = HAVE_LIBZ_FALSE = HAVE_LIBZ_TRUE = # HAVE_PK11_CREATEGENERICOBJECT = HAVE_SSLEAY_SRP = IDN_ENABLED = INSTALL_DATA = ${INSTALL} -m 644 INSTALL_PROGRAM = ${INSTALL} INSTALL_SCRIPT = ${INSTALL} INSTALL_STRIP_PROGRAM = ${SHELL} $(install_sh) -c -s IPV6_ENABLED = KRB4_ENABLED = LD = mipsel-uclibc-linux26-ld LDFLAGS = LIBCURL_LIBS = LIBOBJS = LIBS = LIBTOOL = $(SHELL) $(top_builddir)/libtool LIPO = LN_S = ln -s LTLIBOBJS = MAINT = # MAINTAINER_MODE_FALSE = MAINTAINER_MODE_TRUE = # MAKEINFO = ${SHELL} "/home/perry/project/WNDR4500/src/curl-7.23.1/missing" --run makeinfo MANIFEST_TOOL = : MANOPT = -man MIMPURE_FALSE = MIMPURE_TRUE = # NM = mipsel-uclibc-linux26-nm NMEDIT = NO_UNDEFINED_FALSE = NO_UNDEFINED_TRUE = # NROFF = /usr/bin/nroff OBJDUMP = objdump OBJEXT = o OTOOL = OTOOL64 = PACKAGE = curl PACKAGE_BUGREPORT = a suitable curl mailing list: http://curl.haxx.se/mail/ PACKAGE_NAME = curl PACKAGE_STRING = curl - PACKAGE_TARNAME = curl PACKAGE_URL = PACKAGE_VERSION = - PATH = /projects/hnd/tools/linux/hndtools-mipsel-linux-uclibc-4.2.3/bin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/X11R6/bin PATH_SEPARATOR = : PERL = /usr/bin/perl PKGADD_NAME = cURL - a client that groks URLs PKGADD_PKG = HAXXcurl PKGADD_VENDOR = curl.haxx.se PKGCONFIG = RANDOM_FILE = RANLIB = mipsel-uclibc-linux26-ranlib REQUIRE_LIB_DEPS = yes SED = /bin/sed SET_MAKE = SHELL = /bin/sh SONAME_BUMP_FALSE = SONAME_BUMP_TRUE = # SSL_ENABLED = STATICLIB_FALSE = STATICLIB_TRUE = # STRIP = strip SUPPORT_FEATURES = SUPPORT_PROTOCOLS = HTTP TEST_SERVER_LIBS = USE_ARES = USE_AXTLS = USE_CYASSL = USE_EMBEDDED_ARES_FALSE = USE_EMBEDDED_ARES_TRUE = # USE_GNUTLS = USE_LIBRTMP = USE_LIBSSH2 = USE_MANUAL_FALSE = USE_MANUAL_TRUE = # USE_NSS = USE_OPENLDAP = USE_POLARSSL = USE_SSLEAY = USE_WINDOWS_SSPI = VERSION = - VERSIONNUM = 071701 ac_ct_AR = ac_ct_CC = ac_ct_DUMPBIN = am__fastdepCC_FALSE = # am__fastdepCC_TRUE = am__include = include am__leading_dot = . am__quote = am__tar = ${AMTAR} chof - "$$tardir" am__untar = ${AMTAR} xf - bindir = ${exec_prefix}/bin build = i386-pc-linux-gnu build_alias = i386-pc-linux-gnu build_cpu = i386 build_os = linux-gnu build_vendor = pc datadir = ${datarootdir} datarootdir = ${prefix}/share docdir = ${datarootdir}/doc/${PACKAGE_TARNAME} dvidir = ${docdir} exec_prefix = /home/perry/project/WNDR4500/src/curl-7.23.1/tmp host = mipsel-unknown-linux-gnu host_alias = mipsel-linux host_cpu = mipsel host_os = linux-gnu host_vendor = unknown htmldir = ${docdir} includedir = ${prefix}/include infodir = ${datarootdir}/info install_sh = /home/perry/project/WNDR4500/src/curl-7.23.1/install-sh libdir = ${exec_prefix}/lib libexecdir = ${exec_prefix}/libexec libext = a localedir = ${datarootdir}/locale localstatedir = ${prefix}/var mandir = ${datarootdir}/man mkdir_p = mkdir -p -- oldincludedir = /usr/include pdfdir = ${docdir} prefix = /home/perry/project/WNDR4500/src/curl-7.23.1/tmp program_transform_name = s,x,x, psdir = ${docdir} sbindir = ${exec_prefix}/sbin sharedstatedir = ${prefix}/com subdirs = sysconfdir = ${prefix}/etc target_alias = mipsel-linux AUTOMAKE_OPTIONS = foreign no-dependencies man_MANS = curl.1 curl-config.1 GENHTMLPAGES = curl.html curl-config.html PDFPAGES = curl.pdf curl-config.pdf HTMLPAGES = $(GENHTMLPAGES) index.html SUBDIRS = examples libcurl CLEANFILES = $(GENHTMLPAGES) $(PDFPAGES) EXTRA_DIST = MANUAL BUGS CONTRIBUTE FAQ FEATURES INTERNALS SSLCERTS \ README.win32 RESOURCES TODO TheArtOfHttpScripting THANKS VERSIONS \ KNOWN_BUGS BINDINGS $(man_MANS) $(HTMLPAGES) HISTORY INSTALL \ $(PDFPAGES) LICENSE-MIXING README.netware DISTRO-DILEMMA INSTALL.devcpp \ MAIL-ETIQUETTE MAN2HTML = roffit < $< >$@ SUFFIXES = .1 .html .pdf all: all-recursive .SUFFIXES: .SUFFIXES: .1 .html .pdf $(srcdir)/Makefile.in: # $(srcdir)/Makefile.am $(am__configure_deps) @for dep in $?; do \ case '$(am__configure_deps)' in \ *$$dep*) \ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh \ && exit 0; \ exit 1;; \ esac; \ done; \ echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign docs/Makefile'; \ cd $(top_srcdir) && \ $(AUTOMAKE) --foreign docs/Makefile .PRECIOUS: Makefile Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status @case '$?' in \ *config.status*) \ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \ *) \ echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \ cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \ esac; $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh $(top_srcdir)/configure: # $(am__configure_deps) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh $(ACLOCAL_M4): # $(am__aclocal_m4_deps) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh mostlyclean-libtool: -rm -f *.lo clean-libtool: -rm -rf .libs _libs distclean-libtool: -rm -f libtool uninstall-info-am: install-man1: $(man1_MANS) $(man_MANS) @$(NORMAL_INSTALL) test -z "$(man1dir)" || $(mkdir_p) "$(DESTDIR)$(man1dir)" @list='$(man1_MANS) $(dist_man1_MANS) $(nodist_man1_MANS)'; \ l2='$(man_MANS) $(dist_man_MANS) $(nodist_man_MANS)'; \ for i in $$l2; do \ case "$$i" in \ *.1*) list="$$list $$i" ;; \ esac; \ done; \ for i in $$list; do \ if test -f $(srcdir)/$$i; then file=$(srcdir)/$$i; \ else file=$$i; fi; \ ext=`echo $$i | sed -e 's/^.*\\.//'`; \ case "$$ext" in \ 1*) ;; \ *) ext='1' ;; \ esac; \ inst=`echo $$i | sed -e 's/\\.[0-9a-z]*$$//'`; \ inst=`echo $$inst | sed -e 's/^.*\///'`; \ inst=`echo $$inst | sed '$(transform)'`.$$ext; \ echo " $(INSTALL_DATA) '$$file' '$(DESTDIR)$(man1dir)/$$inst'"; \ $(INSTALL_DATA) "$$file" "$(DESTDIR)$(man1dir)/$$inst"; \ done uninstall-man1: @$(NORMAL_UNINSTALL) @list='$(man1_MANS) $(dist_man1_MANS) $(nodist_man1_MANS)'; \ l2='$(man_MANS) $(dist_man_MANS) $(nodist_man_MANS)'; \ for i in $$l2; do \ case "$$i" in \ *.1*) list="$$list $$i" ;; \ esac; \ done; \ for i in $$list; do \ ext=`echo $$i | sed -e 's/^.*\\.//'`; \ case "$$ext" in \ 1*) ;; \ *) ext='1' ;; \ esac; \ inst=`echo $$i | sed -e 's/\\.[0-9a-z]*$$//'`; \ inst=`echo $$inst | sed -e 's/^.*\///'`; \ inst=`echo $$inst | sed '$(transform)'`.$$ext; \ echo " rm -f '$(DESTDIR)$(man1dir)/$$inst'"; \ rm -f "$(DESTDIR)$(man1dir)/$$inst"; \ done # This directory's subdirectories are mostly independent; you can cd # into them and run `make' without going through this Makefile. # To change the values of `make' variables: instead of editing Makefiles, # (1) if the variable is set in `config.status', edit `config.status' # (which will cause the Makefiles to be regenerated when you run `make'); # (2) otherwise, pass the desired values on the `make' command line. $(RECURSIVE_TARGETS): @failcom='exit 1'; \ for f in x $$MAKEFLAGS; do \ case $$f in \ *=* | --[!k]*);; \ *k*) failcom='fail=yes';; \ esac; \ done; \ dot_seen=no; \ target=`echo $@ | sed s/-recursive//`; \ list='$(SUBDIRS)'; for subdir in $$list; do \ echo "Making $$target in $$subdir"; \ if test "$$subdir" = "."; then \ dot_seen=yes; \ local_target="$$target-am"; \ else \ local_target="$$target"; \ fi; \ (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ || eval $$failcom; \ done; \ if test "$$dot_seen" = "no"; then \ $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \ fi; test -z "$$fail" mostlyclean-recursive clean-recursive distclean-recursive \ maintainer-clean-recursive: @failcom='exit 1'; \ for f in x $$MAKEFLAGS; do \ case $$f in \ *=* | --[!k]*);; \ *k*) failcom='fail=yes';; \ esac; \ done; \ dot_seen=no; \ case "$@" in \ distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \ *) list='$(SUBDIRS)' ;; \ esac; \ rev=''; for subdir in $$list; do \ if test "$$subdir" = "."; then :; else \ rev="$$subdir $$rev"; \ fi; \ done; \ rev="$$rev ."; \ target=`echo $@ | sed s/-recursive//`; \ for subdir in $$rev; do \ echo "Making $$target in $$subdir"; \ if test "$$subdir" = "."; then \ local_target="$$target-am"; \ else \ local_target="$$target"; \ fi; \ (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ || eval $$failcom; \ done && test -z "$$fail" tags-recursive: list='$(SUBDIRS)'; for subdir in $$list; do \ test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \ done ctags-recursive: list='$(SUBDIRS)'; for subdir in $$list; do \ test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \ done ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES) list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ unique=`for i in $$list; do \ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ done | \ $(AWK) ' { files[$$0] = 1; } \ END { for (i in files) print i; }'`; \ mkid -fID $$unique tags: TAGS TAGS: tags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ $(TAGS_FILES) $(LISP) tags=; \ here=`pwd`; \ if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \ include_option=--etags-include; \ empty_fix=.; \ else \ include_option=--include; \ empty_fix=; \ fi; \ list='$(SUBDIRS)'; for subdir in $$list; do \ if test "$$subdir" = .; then :; else \ test ! -f $$subdir/TAGS || \ tags="$$tags $$include_option=$$here/$$subdir/TAGS"; \ fi; \ done; \ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ unique=`for i in $$list; do \ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ done | \ $(AWK) ' { files[$$0] = 1; } \ END { for (i in files) print i; }'`; \ if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \ test -n "$$unique" || unique=$$empty_fix; \ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ $$tags $$unique; \ fi ctags: CTAGS CTAGS: ctags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ $(TAGS_FILES) $(LISP) tags=; \ here=`pwd`; \ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ unique=`for i in $$list; do \ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ done | \ $(AWK) ' { files[$$0] = 1; } \ END { for (i in files) print i; }'`; \ test -z "$(CTAGS_ARGS)$$tags$$unique" \ || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ $$tags $$unique GTAGS: here=`$(am__cd) $(top_builddir) && pwd` \ && cd $(top_srcdir) \ && gtags -i $(GTAGS_ARGS) $$here distclean-tags: -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags distdir: $(DISTFILES) @srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \ list='$(DISTFILES)'; for file in $$list; do \ case $$file in \ $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \ $(top_srcdir)/*) file=`echo "$$file" | sed "s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \ esac; \ if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \ if test "$$dir" != "$$file" && test "$$dir" != "."; then \ dir="/$$dir"; \ $(mkdir_p) "$(distdir)$$dir"; \ else \ dir=''; \ fi; \ if test -d $$d/$$file; then \ if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \ fi; \ cp -pR $$d/$$file $(distdir)$$dir || exit 1; \ else \ test -f $(distdir)/$$file \ || cp -p $$d/$$file $(distdir)/$$file \ || exit 1; \ fi; \ done list='$(DIST_SUBDIRS)'; for subdir in $$list; do \ if test "$$subdir" = .; then :; else \ test -d "$(distdir)/$$subdir" \ || $(mkdir_p) "$(distdir)/$$subdir" \ || exit 1; \ distdir=`$(am__cd) $(distdir) && pwd`; \ top_distdir=`$(am__cd) $(top_distdir) && pwd`; \ (cd $$subdir && \ $(MAKE) $(AM_MAKEFLAGS) \ top_distdir="$$top_distdir" \ distdir="$$distdir/$$subdir" \ distdir) \ || exit 1; \ fi; \ done check-am: all-am check: check-recursive all-am: Makefile $(MANS) installdirs: installdirs-recursive installdirs-am: for dir in "$(DESTDIR)$(man1dir)"; do \ test -z "$$dir" || $(mkdir_p) "$$dir"; \ done install: install-recursive install-exec: install-exec-recursive install-data: install-data-recursive uninstall: uninstall-recursive install-am: all-am @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am installcheck: installcheck-recursive install-strip: $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ `test -z '$(STRIP)' || \ echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install mostlyclean-generic: clean-generic: -test -z "$(CLEANFILES)" || rm -f $(CLEANFILES) distclean-generic: -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) maintainer-clean-generic: @echo "This command is intended for maintainers to use" @echo "it deletes files that may require special tools to rebuild." clean: clean-recursive clean-am: clean-generic clean-libtool mostlyclean-am distclean: distclean-recursive -rm -f Makefile distclean-am: clean-am distclean-generic distclean-libtool \ distclean-tags dvi: dvi-recursive dvi-am: info: info-recursive info-am: install-data-am: install-man install-exec-am: install-info: install-info-recursive install-man: install-man1 installcheck-am: maintainer-clean: maintainer-clean-recursive -rm -f Makefile maintainer-clean-am: distclean-am maintainer-clean-generic mostlyclean: mostlyclean-recursive mostlyclean-am: mostlyclean-generic mostlyclean-libtool pdf-am: ps: ps-recursive ps-am: uninstall-am: uninstall-info-am uninstall-man uninstall-info: uninstall-info-recursive uninstall-man: uninstall-man1 .PHONY: $(RECURSIVE_TARGETS) CTAGS GTAGS all all-am check check-am \ clean clean-generic clean-libtool clean-recursive ctags \ ctags-recursive distclean distclean-generic distclean-libtool \ distclean-recursive distclean-tags distdir dvi dvi-am html \ html-am info info-am install install-am install-data \ install-data-am install-exec install-exec-am install-info \ install-info-am install-man install-man1 install-strip \ installcheck installcheck-am installdirs installdirs-am \ maintainer-clean maintainer-clean-generic \ maintainer-clean-recursive mostlyclean mostlyclean-generic \ mostlyclean-libtool mostlyclean-recursive pdf pdf-am ps ps-am \ tags tags-recursive uninstall uninstall-am uninstall-info-am \ uninstall-man uninstall-man1 html: $(HTMLPAGES) cd libcurl; make html pdf: $(PDFPAGES) cd libcurl; make pdf .1.html: $(MAN2HTML) .1.pdf: @(foo=`echo $@ | sed -e 's/\.[0-9]$$//g'`; \ groff -Tps -man $< >$$foo.ps; \ ps2pdf $$foo.ps $@; \ rm $$foo.ps; \ echo "converted $< to $@") # Tell versions [3.59,3.63) of GNU make to not export all variables. # Otherwise a system limit (for SysV at least) may be exceeded. .NOEXPORT: