# Makefile.in generated by automake 1.11.5 from Makefile.am. # config/Makefile. Generated from Makefile.in by configure. # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, # 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011 Free Software # Foundation, Inc. # This Makefile.in is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY, to the extent permitted by law; without # even the implied warranty of MERCHANTABILITY or FITNESS FOR A # PARTICULAR PURPOSE. am__make_dryrun = \ { \ am__dry=no; \ case $$MAKEFLAGS in \ *\\[\ \ ]*) \ echo 'am--echo: ; @echo "AM" OK' | $(MAKE) -f - 2>/dev/null \ | grep '^AM OK$$' >/dev/null || am__dry=yes;; \ *) \ for am__flg in $$MAKEFLAGS; do \ case $$am__flg in \ *=*|--*) ;; \ *n*) am__dry=yes; break;; \ esac; \ done;; \ esac; \ test $$am__dry = yes; \ } pkgdatadir = $(datadir)/netatalk pkgincludedir = $(includedir)/netatalk pkglibdir = $(libdir)/netatalk pkglibexecdir = $(libexecdir)/netatalk am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd install_sh_DATA = $(install_sh) -c -m 644 install_sh_PROGRAM = $(install_sh) -c install_sh_SCRIPT = $(install_sh) -c INSTALL_HEADER = $(INSTALL_DATA) transform = $(program_transform_name) NORMAL_INSTALL = : PRE_INSTALL = : POST_INSTALL = : NORMAL_UNINSTALL = : PRE_UNINSTALL = : POST_UNINSTALL = : build_triplet = i686-pc-linux-gnu host_triplet = arm-unknown-linux-gnu target_triplet = arm-unknown-linux-gnu #am__append_1 = afp_ldap.conf #am__append_2 = atalkd.conf papd.conf subdir = config DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 am__aclocal_m4_deps = $(top_srcdir)/macros/afs-check.m4 \ $(top_srcdir)/macros/cnid-backend.m4 \ $(top_srcdir)/macros/config-checks.m4 \ $(top_srcdir)/macros/cups.m4 $(top_srcdir)/macros/db3-check.m4 \ $(top_srcdir)/macros/grep-check.m4 \ $(top_srcdir)/macros/gssapi-check.m4 \ $(top_srcdir)/macros/iconv.m4 \ $(top_srcdir)/macros/largefile-check.m4 \ $(top_srcdir)/macros/libgcrypt.m4 \ $(top_srcdir)/macros/libtool.m4 \ $(top_srcdir)/macros/ltoptions.m4 \ $(top_srcdir)/macros/ltsugar.m4 \ $(top_srcdir)/macros/ltversion.m4 \ $(top_srcdir)/macros/lt~obsolete.m4 \ $(top_srcdir)/macros/pam-check.m4 \ $(top_srcdir)/macros/perl-check.m4 \ $(top_srcdir)/macros/ps-check.m4 \ $(top_srcdir)/macros/quota-check.m4 \ $(top_srcdir)/macros/snprintf-check.m4 \ $(top_srcdir)/macros/srvloc.m4 \ $(top_srcdir)/macros/ssl-check.m4 \ $(top_srcdir)/macros/summary.m4 \ $(top_srcdir)/macros/tcp-wrappers.m4 \ $(top_srcdir)/macros/util.m4 $(top_srcdir)/macros/webmin.m4 \ $(top_srcdir)/macros/zeroconf.m4 $(top_srcdir)/configure.ac am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ $(ACLOCAL_M4) mkinstalldirs = $(install_sh) -d CONFIG_HEADER = $(top_builddir)/config.h CONFIG_CLEAN_FILES = CONFIG_CLEAN_VPATH_FILES = SOURCES = DIST_SOURCES = RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \ html-recursive info-recursive install-data-recursive \ install-dvi-recursive install-exec-recursive \ install-html-recursive install-info-recursive \ install-pdf-recursive install-ps-recursive install-recursive \ installcheck-recursive installdirs-recursive pdf-recursive \ ps-recursive uninstall-recursive am__can_run_installinfo = \ case $$AM_UPDATE_INFO_DIR in \ n|no|NO) false;; \ *) (install-info --version) >/dev/null 2>&1;; \ esac RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \ distclean-recursive maintainer-clean-recursive AM_RECURSIVE_TARGETS = $(RECURSIVE_TARGETS:-recursive=) \ $(RECURSIVE_CLEAN_TARGETS:-recursive=) tags TAGS ctags CTAGS \ distdir ETAGS = etags CTAGS = ctags DIST_SUBDIRS = $(SUBDIRS) DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) am__relativize = \ dir0=`pwd`; \ sed_first='s,^\([^/]*\)/.*$$,\1,'; \ sed_rest='s,^[^/]*/*,,'; \ sed_last='s,^.*/\([^/]*\)$$,\1,'; \ sed_butlast='s,/*[^/]*$$,,'; \ while test -n "$$dir1"; do \ first=`echo "$$dir1" | sed -e "$$sed_first"`; \ if test "$$first" != "."; then \ if test "$$first" = ".."; then \ dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \ dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \ else \ first2=`echo "$$dir2" | sed -e "$$sed_first"`; \ if test "$$first2" = "$$first"; then \ dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \ else \ dir2="../$$dir2"; \ fi; \ dir0="$$dir0"/"$$first"; \ fi; \ fi; \ dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \ done; \ reldir="$$dir2" ACLOCAL = ${SHELL} /home/antony/disk2/R7000/V1.0.2.107_1.0.17/ap/gpl/timemachine/netatalk-2.2.5/missing --run aclocal-1.11 ACL_LIBS = AFS_CFLAGS = AFS_LIBS = AMTAR = $${TAR-tar} AR = ar AUTOCONF = ${SHELL} /home/antony/disk2/R7000/V1.0.2.107_1.0.17/ap/gpl/timemachine/netatalk-2.2.5/missing --run autoconf AUTOHEADER = ${SHELL} /home/antony/disk2/R7000/V1.0.2.107_1.0.17/ap/gpl/timemachine/netatalk-2.2.5/missing --run autoheader AUTOMAKE = ${SHELL} /home/antony/disk2/R7000/V1.0.2.107_1.0.17/ap/gpl/timemachine/netatalk-2.2.5/missing --run automake-1.11 AVAHI_CFLAGS = AVAHI_LIBS = AVAHI_TPOLL_CFLAGS = AVAHI_TPOLL_LIBS = AWK = gawk BDB_BIN = /usr/bin BDB_CFLAGS = BDB_LIBS = -ldb-4.7 BDB_PATH = /usr CC = arm-brcm-linux-uclibcgnueabi-gcc -std=gnu99 CCDEPMODE = depmode=gcc3 CFLAGS = -I$(top_srcdir)/include -D_U_="__attribute__((unused))" -I./include -D_U_="__attribute__((unused))" -g -O2 -I./sys -I$(top_srcdir)/sys COMPILE_64BIT_KMODULE = COMPILE_KERNEL_GCC = CPP = arm-brcm-linux-uclibcgnueabi-gcc -std=gnu99 -E CPPFLAGS = CRYPT_LIBS = -lcrypt CUPS_CFLAGS = CUPS_CONFIG = CUPS_LDFLAGS = CUPS_LIBS = CYGPATH_W = echo DEFAULT_CNID_SCHEME = dbd DEFS = -DHAVE_CONFIG_H DEPDIR = .deps DLLTOOL = false DSYMUTIL = DUMPBIN = : ECHO_C = ECHO_N = -n ECHO_T = EGREP = /bin/grep -E EXEEXT = FGREP = /bin/grep -F GREP = /bin/grep GSSAPI_CFLAGS = GSSAPI_LDFLAGS = GSSAPI_LIBS = ICONV_CFLAGS = ICONV_LIBS = INSTALL = /usr/bin/install -c INSTALL_DATA = ${INSTALL} -m 644 INSTALL_PROGRAM = ${INSTALL} INSTALL_SCRIPT = ${INSTALL} INSTALL_STRIP_PROGRAM = $(install_sh) -c -s KCFLAGS = KLDFLAGS = KRB5_CONFIG = LD = /projects/hnd/tools/linux/hndtools-arm-linux-2.6.36-uclibc-4.5.3/arm-brcm-linux-uclibcgnueabi/bin/ld LDFLAGS = LIBADD_DL = -ldl LIBADD_DLD_LINK = LIBADD_DLOPEN = -ldl LIBADD_SHL_LOAD = LIBGCRYPT_CFLAGS = LIBGCRYPT_CONFIG = /usr/bin/libgcrypt-config LIBGCRYPT_LIBS = -lgcrypt -lgpg-error LIBOBJS = ${LIBOBJDIR}memcmp$U.o LIBS = -lpthread -ldl -L$(top_srcdir)/libatalk LIBTOOL = $(SHELL) $(top_builddir)/libtool LIPO = LN_S = ln -s LTLIBOBJS = ${LIBOBJDIR}memcmp$U.lo LT_DLLOADERS = dlopen.la LT_DLPREOPEN = -dlpreopen dlopen.la MAINT = MAKEINFO = ${SHELL} /home/antony/disk2/R7000/V1.0.2.107_1.0.17/ap/gpl/timemachine/netatalk-2.2.5/missing --run makeinfo MANIFEST_TOOL = : MKDIR_P = /bin/mkdir -p NETATALK_VERSION = 2.2.5 NM = nm NMEDIT = OBJDUMP = objdump OBJEXT = o OTOOL = OTOOL64 = OVERWRITE_CONFIG = no PACKAGE = netatalk PACKAGE_BUGREPORT = PACKAGE_NAME = PACKAGE_STRING = PACKAGE_TARNAME = PACKAGE_URL = PACKAGE_VERSION = PAMDIR = / PAM_ACCOUNT = system-auth PAM_AUTH = system-auth PAM_CFLAGS = PAM_DIRECTIVE = include PAM_LIBS = PAM_PASSWORD = system-auth PAM_SESSION = system-auth PATH_SEPARATOR = : PERL = /usr/bin/perl PKGCONFDIR = ${prefix}/etc/netatalk PKG_CONFIG = /usr/bin/pkg-config PS = /bin/ps PTHREAD_LIBS = -lpthread QUOTA_LIBS = RANLIB = ranlib SED = /bin/sed SERVERTEXT = ${prefix}/etc/netatalk/msg SET_MAKE = SHELL = /bin/sh SLP_CFLAGS = SLP_LIBS = SPOOLDIR = ${prefix}/var/spool/netatalk SSL_CFLAGS = -I/usr/include/openssl SSL_LIBS = -lcrypto STRIP = strip UAMS_PATH = ${prefix}/etc/netatalk/uams VERSION = 2.2.5 WEBMIN_PASS = WEBMIN_PATH = WEBMIN_PORT = WEBMIN_USER = WEBMIN_VERSION = WRAP_LIBS = ZEROCONF_CFLAGS = ZEROCONF_LIBS = abs_builddir = /home/antony/disk2/R7000/V1.0.2.107_1.0.17/ap/gpl/timemachine/netatalk-2.2.5/config abs_srcdir = /home/antony/disk2/R7000/V1.0.2.107_1.0.17/ap/gpl/timemachine/netatalk-2.2.5/config abs_top_builddir = /home/antony/disk2/R7000/V1.0.2.107_1.0.17/ap/gpl/timemachine/netatalk-2.2.5 abs_top_srcdir = /home/antony/disk2/R7000/V1.0.2.107_1.0.17/ap/gpl/timemachine/netatalk-2.2.5 ac_ct_AR = ar ac_ct_CC = ac_ct_DUMPBIN = link -dump am__include = include am__leading_dot = . am__quote = am__tar = $${TAR-tar} chof - "$$tardir" am__untar = $${TAR-tar} xf - bindir = ${exec_prefix}/bin build = i686-pc-linux-gnu build_alias = build_cpu = i686 build_os = linux-gnu build_vendor = pc builddir = . compiled_backends = dbd last tdb datadir = ${datarootdir} datarootdir = ${prefix}/share docdir = ${datarootdir}/doc/${PACKAGE} dvidir = ${docdir} exec_prefix = ${prefix} host = arm-unknown-linux-gnu host_alias = arm-linux host_cpu = arm host_os = linux-gnu host_vendor = unknown htmldir = ${docdir} includedir = ${prefix}/include infodir = ${datarootdir}/info install_sh = ${SHELL} ../install-sh libdir = ${exec_prefix}/lib libexecdir = ${exec_prefix}/libexec localedir = ${datarootdir}/locale localstatedir = ${prefix}/var mandir = ${datarootdir}/man mkdir_p = /bin/mkdir -p oldincludedir = /usr/include pdfdir = ${docdir} prefix = /usr/local program_transform_name = s,x,x, psdir = ${docdir} sbindir = ${exec_prefix}/sbin sharedstatedir = ${prefix}/com srcdir = . sys_symbol_underscore = no sysconfdir = ${prefix}/etc target = arm-unknown-linux-gnu target_alias = target_cpu = arm target_os = linux-gnu target_vendor = unknown top_build_prefix = ../ top_builddir = .. top_srcdir = .. SUBDIRS = pam SUFFIXES = .tmpl . TMPLFILES = afpd.conf.tmpl AppleVolumes.default.tmpl GENFILES = afpd.conf AppleVolumes.default CLEANFILES = $(GENFILES) EXTRA_DIST = \ AppleVolumes.default.tmpl \ AppleVolumes.system \ afp_ldap.conf \ afpd.conf.tmpl \ atalkd.conf \ netatalk.conf \ papd.conf CONFFILES = AppleVolumes.system netatalk.conf \ $(am__append_1) $(am__append_2) #CONFFILES = AppleVolumes.system $(am__append_1) \ # $(am__append_2) pkgconfdir = ${prefix}/etc/netatalk webminpath = webminuser = webminversion = webminpass = webminport = all: all-recursive .SUFFIXES: .SUFFIXES: .tmpl . $(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps) @for dep in $?; do \ case '$(am__configure_deps)' in \ *$$dep*) \ ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \ && { if test -f $@; then exit 0; else break; fi; }; \ exit 1;; \ esac; \ done; \ echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign config/Makefile'; \ $(am__cd) $(top_srcdir) && \ $(AUTOMAKE) --foreign config/Makefile .PRECIOUS: Makefile Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status @case '$?' in \ *config.status*) \ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \ *) \ echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \ cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \ esac; $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh $(top_srcdir)/configure: $(am__configure_deps) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh $(ACLOCAL_M4): $(am__aclocal_m4_deps) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh $(am__aclocal_m4_deps): mostlyclean-libtool: -rm -f *.lo clean-libtool: -rm -rf .libs _libs # This directory's subdirectories are mostly independent; you can cd # into them and run `make' without going through this Makefile. # To change the values of `make' variables: instead of editing Makefiles, # (1) if the variable is set in `config.status', edit `config.status' # (which will cause the Makefiles to be regenerated when you run `make'); # (2) otherwise, pass the desired values on the `make' command line. $(RECURSIVE_TARGETS): @fail= failcom='exit 1'; \ for f in x $$MAKEFLAGS; do \ case $$f in \ *=* | --[!k]*);; \ *k*) failcom='fail=yes';; \ esac; \ done; \ dot_seen=no; \ target=`echo $@ | sed s/-recursive//`; \ list='$(SUBDIRS)'; for subdir in $$list; do \ echo "Making $$target in $$subdir"; \ if test "$$subdir" = "."; then \ dot_seen=yes; \ local_target="$$target-am"; \ else \ local_target="$$target"; \ fi; \ ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ || eval $$failcom; \ done; \ if test "$$dot_seen" = "no"; then \ $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \ fi; test -z "$$fail" $(RECURSIVE_CLEAN_TARGETS): @fail= failcom='exit 1'; \ for f in x $$MAKEFLAGS; do \ case $$f in \ *=* | --[!k]*);; \ *k*) failcom='fail=yes';; \ esac; \ done; \ dot_seen=no; \ case "$@" in \ distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \ *) list='$(SUBDIRS)' ;; \ esac; \ rev=''; for subdir in $$list; do \ if test "$$subdir" = "."; then :; else \ rev="$$subdir $$rev"; \ fi; \ done; \ rev="$$rev ."; \ target=`echo $@ | sed s/-recursive//`; \ for subdir in $$rev; do \ echo "Making $$target in $$subdir"; \ if test "$$subdir" = "."; then \ local_target="$$target-am"; \ else \ local_target="$$target"; \ fi; \ ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ || eval $$failcom; \ done && test -z "$$fail" tags-recursive: list='$(SUBDIRS)'; for subdir in $$list; do \ test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \ done ctags-recursive: list='$(SUBDIRS)'; for subdir in $$list; do \ test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \ done ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES) list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ unique=`for i in $$list; do \ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ done | \ $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ END { if (nonempty) { for (i in files) print i; }; }'`; \ mkid -fID $$unique tags: TAGS TAGS: tags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ $(TAGS_FILES) $(LISP) set x; \ here=`pwd`; \ if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \ include_option=--etags-include; \ empty_fix=.; \ else \ include_option=--include; \ empty_fix=; \ fi; \ list='$(SUBDIRS)'; for subdir in $$list; do \ if test "$$subdir" = .; then :; else \ test ! -f $$subdir/TAGS || \ set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \ fi; \ done; \ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ unique=`for i in $$list; do \ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ done | \ $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ END { if (nonempty) { for (i in files) print i; }; }'`; \ shift; \ if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \ test -n "$$unique" || unique=$$empty_fix; \ if test $$# -gt 0; then \ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ "$$@" $$unique; \ else \ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ $$unique; \ fi; \ fi ctags: CTAGS CTAGS: ctags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ $(TAGS_FILES) $(LISP) list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ unique=`for i in $$list; do \ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ done | \ $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ END { if (nonempty) { for (i in files) print i; }; }'`; \ test -z "$(CTAGS_ARGS)$$unique" \ || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ $$unique GTAGS: here=`$(am__cd) $(top_builddir) && pwd` \ && $(am__cd) $(top_srcdir) \ && gtags -i $(GTAGS_ARGS) "$$here" distclean-tags: -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags distdir: $(DISTFILES) @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ list='$(DISTFILES)'; \ dist_files=`for file in $$list; do echo $$file; done | \ sed -e "s|^$$srcdirstrip/||;t" \ -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ case $$dist_files in \ */*) $(MKDIR_P) `echo "$$dist_files" | \ sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ sort -u` ;; \ esac; \ for file in $$dist_files; do \ if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ if test -d $$d/$$file; then \ dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ if test -d "$(distdir)/$$file"; then \ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ fi; \ if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ fi; \ cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \ else \ test -f "$(distdir)/$$file" \ || cp -p $$d/$$file "$(distdir)/$$file" \ || exit 1; \ fi; \ done @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \ if test "$$subdir" = .; then :; else \ $(am__make_dryrun) \ || test -d "$(distdir)/$$subdir" \ || $(MKDIR_P) "$(distdir)/$$subdir" \ || exit 1; \ dir1=$$subdir; dir2="$(distdir)/$$subdir"; \ $(am__relativize); \ new_distdir=$$reldir; \ dir1=$$subdir; dir2="$(top_distdir)"; \ $(am__relativize); \ new_top_distdir=$$reldir; \ echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \ echo " am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \ ($(am__cd) $$subdir && \ $(MAKE) $(AM_MAKEFLAGS) \ top_distdir="$$new_top_distdir" \ distdir="$$new_distdir" \ am__remove_distdir=: \ am__skip_length_check=: \ am__skip_mode_fix=: \ distdir) \ || exit 1; \ fi; \ done check-am: all-am check: check-recursive all-am: Makefile installdirs: installdirs-recursive installdirs-am: install: install-recursive install-exec: install-exec-recursive install-data: install-data-recursive uninstall: uninstall-recursive install-am: all-am @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am installcheck: installcheck-recursive install-strip: if test -z '$(STRIP)'; then \ $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ install; \ else \ $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \ fi mostlyclean-generic: clean-generic: -test -z "$(CLEANFILES)" || rm -f $(CLEANFILES) distclean-generic: -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) maintainer-clean-generic: @echo "This command is intended for maintainers to use" @echo "it deletes files that may require special tools to rebuild." clean: clean-recursive clean-am: clean-generic clean-libtool mostlyclean-am distclean: distclean-recursive -rm -f Makefile distclean-am: clean-am distclean-generic distclean-tags dvi: dvi-recursive dvi-am: html: html-recursive html-am: info: info-recursive info-am: install-data-am: install-data-local install-dvi: install-dvi-recursive install-dvi-am: install-exec-am: install-html: install-html-recursive install-html-am: install-info: install-info-recursive install-info-am: install-man: install-pdf: install-pdf-recursive install-pdf-am: install-ps: install-ps-recursive install-ps-am: installcheck-am: maintainer-clean: maintainer-clean-recursive -rm -f Makefile maintainer-clean-am: distclean-am maintainer-clean-generic mostlyclean: mostlyclean-recursive mostlyclean-am: mostlyclean-generic mostlyclean-libtool pdf: pdf-recursive pdf-am: ps: ps-recursive ps-am: uninstall-am: uninstall-local .MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) ctags-recursive \ install-am install-strip tags-recursive .PHONY: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) CTAGS GTAGS \ all all-am check check-am clean clean-generic clean-libtool \ ctags ctags-recursive distclean distclean-generic \ distclean-libtool distclean-tags distdir dvi dvi-am html \ html-am info info-am install install-am install-data \ install-data-am install-data-local install-dvi install-dvi-am \ install-exec install-exec-am install-html install-html-am \ install-info install-info-am install-man install-pdf \ install-pdf-am install-ps install-ps-am install-strip \ installcheck installcheck-am installdirs installdirs-am \ maintainer-clean maintainer-clean-generic mostlyclean \ mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \ tags tags-recursive uninstall uninstall-am uninstall-local # # rule to parse template files # .tmpl: sed -e s@:UAMS_PATH:@${UAMS_PATH}@ \ -e s@:ETCDIR:@${pkgconfdir}@ \ -e s@:COMPILED_BACKENDS:@"$(compiled_backends)"@ \ -e s@:DEFAULT_CNID_SCHEME:@$(DEFAULT_CNID_SCHEME)@ \ <$< >$@ # # install configuration files # install-data-local: install-config-files install-webmin uninstall-local: for f in $(CONFFILES) $(GENFILES); do \ echo rm -f $(DESTDIR)$(pkgconfdir)/$$f; \ rm -f $(DESTDIR)$(pkgconfdir)/$$f; \ done # rm -f $(DESTDIR)/etc/default/netatalk install-config-files: $(CONFFILES) $(GENFILES) $(mkinstalldirs) $(DESTDIR)$(pkgconfdir) for f in $(CONFFILES) $(GENFILES); do \ if test "x$(OVERWRITE_CONFIG)" = "xyes" -o ! -f $(DESTDIR)$(pkgconfdir)/$$f; then \ echo "$(INSTALL_DATA) $$f $(DESTDIR)$(pkgconfdir)"; \ $(INSTALL_DATA) $$f $(DESTDIR)$(pkgconfdir); \ else \ echo "not overwriting $$f"; \ fi; \ done # $(mkinstalldirs) $(DESTDIR)/etc/default # if test "x$(OVERWRITE_CONFIG)" = "xyes" -o ! -f /etc/default/netatalk; then \ # echo "$(INSTALL_DATA) $(srcdir)/netatalk.conf $(DESTDIR)/etc/default/netatalk"; \ # $(INSTALL_DATA) $(srcdir)/netatalk.conf $(DESTDIR)/etc/default/netatalk; \ # else \ # echo "not overwriting /etc/default/netatalk"; \ # fi install-webmin: if test "x$(webminpath)" != "x"; then \ if ! test -d "x$(webminpath)"; then \ mkdir -p "$(webminpath)"; \ fi; \ cd "$(webminpath)"; \ wget http://prdownloads.sourceforge.net/webadmin/webmin-$(webminversion).tar.gz ; \ tar xzf webmin-$(webminversion).tar.gz; \ rm webmin-$(webminversion).tar.gz; \ /etc/init.d/webmin stop; \ rm -r webmin; \ mv webmin-$(webminversion) webmin; \ cd webmin; \ rm -r adsl-client apache at backup-config bacula-backup bandwidth bind8 bsdexports burner \ cfengine cluster-copy cluster-cron cluster-passwd cluster-shell cluster-software cluster-useradmin \ cluster-usermin cluster-webmin custom \ cron dfsadmin dhcpd dnsadmin dovecot exim exports \ fdisk fetchmail file filter firewall format frox fsdump grub heartbeat hpuxexports \ htaccess-htpasswd idmapd inetd inittab ipfilter ipfw ipsec jabber \ ldap-server lilo logrotate lpadmin lvm \ mailboxes mailcap majordomo man mon mscstyle3 mysql \ net nis openslp pap phpini postfix postgresql ppp-client pptp-client pptp-server \ procmail proftpd pserver qmailadmin raid rbac \ samba sarg sendmail sentry sgiexports shell \ shorewall smart-status smf software spam squid sshd \ status stunnel tcpwrappers telnet time tunnel \ updown usermin vgetty webalizer wuftpd xinetd zones; \ wget https://sourceforge.net/projects/netatalk/files/Netatalk%20Webmin%20Module/0.9-beta2/netatalk.wbm.gz/download ; \ tar xzf netatalk.wbm.gz; \ rm netatalk.wbm.gz; \ cd netatalk; \ rm config; \ echo "applevolumedefault_c=$(sysconfdir)/netatalk/AppleVolumes.default" >> config; \ echo "applevolumesystem_c=$(sysconfdir)/netatalk/AppleVolumes.system" >> config; \ echo "afpd_c=$(sysconfdir)/netatalk/afpd.conf" >> config; \ echo "atalk_c=$(sysconfdir)/netatalk/atalk.conf" >> config; \ echo "papd_c=$(sysconfdir)/netatalk/papd.conf" >> config; \ echo "afpd_d=$(sbindir)/afpd" >> config; \ echo "atalkd_d=$(sbindir)/atalkd" >> config; \ echo "papd_d=$(sbindir)/papd" >> config; \ echo "netatalk_c=//etc/pam.d" >> config; \ echo "atalk_start=$(sysconfdir)/init.d/atalk" >> config; \ echo "select_minUsers=" >> config; \ echo "select_maxUsers=" >> config; \ echo "atalk_nls=" >> config; \ cd ..; \ config_dir="$(sysconfdir)/netatalk/webmin-config" \ var_dir="$(prefix)/var" \ perl="`which perl`" \ port="$(webminport)" \ login="$(webminuser)" \ password="$(webminpass)" \ ssl=1 \ atboot=1 \ bootscript=netamin \ ./setup.sh > /dev/null; \ fi # Tell versions [3.59,3.63) of GNU make to not export all variables. # Otherwise a system limit (for SysV at least) may be exceeded. .NOEXPORT: