# Makefile.in generated by automake 1.11.1 from Makefile.am.
# doc/Makefile.  Generated from Makefile.in by configure.

# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
# 2003, 2004, 2005, 2006, 2007, 2008, 2009  Free Software Foundation,
# Inc.
# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.

# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
# PARTICULAR PURPOSE.




pkgdatadir = $(datadir)/dbus
pkgincludedir = $(includedir)/dbus
pkglibdir = $(libdir)/dbus
pkglibexecdir = $(libexecdir)/dbus
am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
install_sh_DATA = $(install_sh) -c -m 644
install_sh_PROGRAM = $(install_sh) -c
install_sh_SCRIPT = $(install_sh) -c
INSTALL_HEADER = $(INSTALL_DATA)
transform = $(program_transform_name)
NORMAL_INSTALL = :
PRE_INSTALL = :
POST_INSTALL = :
NORMAL_UNINSTALL = :
PRE_UNINSTALL = :
POST_UNINSTALL = :
build_triplet = i686-pc-linux-gnu
host_triplet = arm-unknown-linux-gnu
am__append_1 = dbus.devhelp
am__append_2 = $(MAN_HTML_FILES)
subdir = doc
DIST_COMMON = $(dist_doc_DATA) $(dist_html_DATA) $(dist_man1_MANS) \
	$(srcdir)/Makefile.am $(srcdir)/Makefile.in \
	$(srcdir)/dbus-daemon.1.in TODO
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
am__aclocal_m4_deps = $(top_srcdir)/m4/as-ac-expand.m4 \
	$(top_srcdir)/m4/compiler.m4 $(top_srcdir)/m4/libtool.m4 \
	$(top_srcdir)/m4/ltoptions.m4 $(top_srcdir)/m4/ltsugar.m4 \
	$(top_srcdir)/m4/ltversion.m4 $(top_srcdir)/m4/lt~obsolete.m4 \
	$(top_srcdir)/m4/pkg.m4 $(top_srcdir)/m4/tp-compiler-flag.m4 \
	$(top_srcdir)/m4/tp-compiler-warnings.m4 \
	$(top_srcdir)/configure.ac
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
	$(ACLOCAL_M4)
mkinstalldirs = $(install_sh) -d
CONFIG_HEADER = $(top_builddir)/config.h
CONFIG_CLEAN_FILES = dbus-daemon.1
CONFIG_CLEAN_VPATH_FILES =
AM_V_GEN = $(am__v_GEN_$(V))
am__v_GEN_ = $(am__v_GEN_$(AM_DEFAULT_VERBOSITY))
am__v_GEN_0 = @echo "  GEN   " $@;
AM_V_at = $(am__v_at_$(V))
am__v_at_ = $(am__v_at_$(AM_DEFAULT_VERBOSITY))
am__v_at_0 = @
SOURCES =
DIST_SOURCES =
am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
am__vpath_adj = case $$p in \
    $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
    *) f=$$p;; \
  esac;
am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
am__install_max = 40
am__nobase_strip_setup = \
  srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
am__nobase_strip = \
  for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
am__nobase_list = $(am__nobase_strip_setup); \
  for p in $$list; do echo "$$p $$p"; done | \
  sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
  $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
    if (++n[$$2] == $(am__install_max)) \
      { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
    END { for (dir in files) print dir, files[dir] }'
am__base_list = \
  sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
  sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
man1dir = $(mandir)/man1
am__installdirs = "$(DESTDIR)$(man1dir)" "$(DESTDIR)$(docdir)" \
	"$(DESTDIR)$(htmldir)" "$(DESTDIR)$(htmldir)"
NROFF = nroff
MANS = $(dist_man1_MANS) $(man1_MANS)
DATA = $(dist_doc_DATA) $(dist_html_DATA) $(html_DATA)
DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
ACLOCAL = ${SHELL} /home/tab/r6300/V1.0.0.88_1.0.14/ap/gpl/iserver/dbus-1.6.8/missing --run aclocal-1.11
ADT_LIBS = 
AMTAR = ${SHELL} /home/tab/r6300/V1.0.0.88_1.0.14/ap/gpl/iserver/dbus-1.6.8/missing --run tar
AM_DEFAULT_VERBOSITY = 0
AR = arm-brcm-linux-uclibcgnueabi-ar
AUTOCONF = ${SHELL} /home/tab/r6300/V1.0.0.88_1.0.14/ap/gpl/iserver/dbus-1.6.8/missing --run autoconf
AUTOHEADER = ${SHELL} /home/tab/r6300/V1.0.0.88_1.0.14/ap/gpl/iserver/dbus-1.6.8/missing --run autoheader
AUTOMAKE = ${SHELL} /home/tab/r6300/V1.0.0.88_1.0.14/ap/gpl/iserver/dbus-1.6.8/missing --run automake-1.11
AWK = gawk
BUILD_FILEVERSION = 
BUILD_TIMESTAMP = 
CC = arm-brcm-linux-uclibcgnueabi-gcc
CCDEPMODE = depmode=gcc3
CFLAGS =  -Wall -Wextra -Wchar-subscripts -Wmissing-declarations -Wmissing-prototypes -Wnested-externs -Wpointer-arith -Wcast-align -Wno-address -Wfloat-equal -Wdeclaration-after-statement -Wno-unused-label -Wno-missing-field-initializers -Wno-unused-parameter -Wno-sign-compare -Wno-pointer-sign -Wno-type-limits -fno-common -fno-strict-aliasing -Os -O2 -DBCMWPA2 -DRESTART_ALL_PROCESSES -D__CONFIG_USBAP__ -DBCMQOS -DBCMWPS -D__CONFIG_EMF__ -DTRAFFIC_MGMT -DPHYMON -DSUPPORT_REMOTE_HTTPS -DINCLUDE_WPS_V20 -DINCLUDE_5G_AUTO_CHANNEL -DOPENDNS_PARENTAL_CONTROL -DINCLUDE_UCP -DU12H240 -DR6300v2 -DMULTIPLE_SSID -DENABLE_ML -DBCM53125 -DBCM5301X -DCONFIG_RUSSIA_IPTV -DDLNA -DHTTP_ACCESS_USB -DMAX_USB_ACCESS -DSAMBA_ENABLE -DUSB_NEW_SPEC -DINCLUDE_WIFI_BUTTON -DINCLUDE_USB_LED -DINCLUDE_DUAL_BAND -DSINGLE_FIRMWARE -DINCLUDE_GET_ST_CHKSUM -DUNIFIED_STR_TBL -DFIRST_MTD_ROTATION -DWIFI_ON_OFF_SCHE -DAUTO_CONN_24HR -DIGMP_PROXY -DAP_MODE -D__CONFIG_IGMP_SNOOPING__ -DLINUX26 -DINCLUDE_IPV6 -DPRESET_WL_SECURITY -DNEW_BCM_WPS_IPC -DSUPPORT_AC_MODE -DSTA_MODE -DPPP_RU_DESIGN -DEXT_ACS -D__CONFIG_PLC__ -D__CONFIG_URE__ -DPLC -DWPS_LONGPUSH_DISABLE -Os -DLINUX26 -DCONFIG_KERNEL_2_6_36 -I/home/tab/r6300/V1.0.0.88_1.0.14/ap/gpl/iserver/build/usr/include
CPP = arm-brcm-linux-uclibcgnueabi-gcc -E
CPPFLAGS = -I/home/tab/r6300/V1.0.0.88_1.0.14/ap/gpl/iserver/build/usr/include
CXX = g++
CXXCPP = g++ -E
CXXDEPMODE = depmode=gcc3
CXXFLAGS = -g -O2
CYGPATH_W = echo
DBUS_BINDIR = /usr/bin
DBUS_CONSOLE_AUTH_DIR = /var/run/console/
DBUS_CONSOLE_OWNER_FILE = 
DBUS_DAEMONDIR = /usr/bin
DBUS_DATADIR = /usr/share
DBUS_GLIB_CFLAGS = 
DBUS_GLIB_LIBS = 
DBUS_HAVE_INT64 = 1
DBUS_INT16_TYPE = short
DBUS_INT32_TYPE = int
DBUS_INT64_CONSTANT = (val##LL)
DBUS_INT64_TYPE = long long
DBUS_LIBEXECDIR = /usr/libexec
DBUS_MAJOR_VERSION = 1
DBUS_MICRO_VERSION = 8
DBUS_MINOR_VERSION = 6
DBUS_PATH_OR_ABSTRACT = path
DBUS_PREFIX = /usr
DBUS_SESSION_BUS_DEFAULT_ADDRESS = unix:tmpdir=/tmp
DBUS_SESSION_SOCKET_DIR = /tmp
DBUS_STATIC_BUILD_CPPFLAGS = 
DBUS_SYSTEM_BUS_DEFAULT_ADDRESS = unix:path=/var/run/system_bus_socket
DBUS_SYSTEM_PID_FILE = /usr/var/run/messagebus.pid
DBUS_SYSTEM_SOCKET = /var/run/system_bus_socket
DBUS_TEST_DATA = /home/tab/r6300/V1.0.0.88_1.0.14/ap/gpl/iserver/dbus-1.6.8/test/data
DBUS_TEST_EXEC = /home/tab/r6300/V1.0.0.88_1.0.14/ap/gpl/iserver/dbus-1.6.8/test
DBUS_UINT64_CONSTANT = (val##ULL)
DBUS_USER = messagebus
DBUS_VERSION = 1.6.8
DBUS_X_CFLAGS =  -I/usr/include
DBUS_X_LIBS =  -L/usr/lib  -lX11 
DEFS = -DHAVE_CONFIG_H
DEPDIR = .deps
DLLTOOL = false
DOXYGEN = /usr/bin/doxygen
DSYMUTIL = 
DUMPBIN = 
ECHO_C = 
ECHO_N = -n
ECHO_T = 
EGREP = /bin/grep -E
EXEEXT = 
EXPANDED_BINDIR = /usr/bin
EXPANDED_DATADIR = /usr/share
EXPANDED_LIBDIR = /usr/lib
EXPANDED_LIBEXECDIR = /usr/libexec
EXPANDED_LOCALSTATEDIR = /usr/var
EXPANDED_PREFIX = /usr
EXPANDED_SYSCONFDIR = /usr/etc
FGREP = /bin/grep -F
GETTEXT_PACKAGE = dbus-1
GLIB_CFLAGS = 
GLIB_LIBS = 
GREP = /bin/grep
INSTALL = /usr/bin/install -c
INSTALL_DATA = ${INSTALL} -m 644
INSTALL_PROGRAM = ${INSTALL}
INSTALL_SCRIPT = ${INSTALL}
INSTALL_STRIP_PROGRAM = $(install_sh) -c -s
LAUNCHCTL = 
LAUNCHD_AGENT_DIR = /Library/LaunchAgents
LD = arm-brcm-linux-uclibcgnueabi-ld
LDFLAGS = -L/home/tab/r6300/V1.0.0.88_1.0.14/ap/gpl/iserver/build/usr/lib
LIBDBUS_LIBS = -lpthread 
LIBOBJS = 
LIBS = 
LIBTOOL = $(SHELL) $(top_builddir)/libtool
LIBXML_CFLAGS = 
LIBXML_LIBS = 
LIPO = 
LN_S = ln -s
LTLIBOBJS = 
LT_AGE = 7
LT_CURRENT = 10
LT_REVISION = 2
MAINT = 
MAKEINFO = ${SHELL} /home/tab/r6300/V1.0.0.88_1.0.14/ap/gpl/iserver/dbus-1.6.8/missing --run makeinfo
MAN2HTML = /usr/bin/man2html
MANIFEST_TOOL = :
MKDIR_P = /bin/mkdir -p
NETWORK_libs = 
NM = arm-brcm-linux-uclibcgnueabi-nm
NMEDIT = 
OBJDUMP = arm-brcm-linux-uclibcgnueabi-objdump
OBJEXT = o
OTOOL = 
OTOOL64 = 
PACKAGE = dbus
PACKAGE_BUGREPORT = https://bugs.freedesktop.org/enter_bug.cgi?product=dbus
PACKAGE_NAME = dbus
PACKAGE_STRING = dbus 1.6.8
PACKAGE_TARNAME = dbus
PACKAGE_URL = 
PACKAGE_VERSION = 1.6.8
PATH_SEPARATOR = :
PKG_CONFIG = /usr/bin/pkg-config
PYTHON = :
PYTHON_EXEC_PREFIX = 
PYTHON_PLATFORM = 
PYTHON_PREFIX = 
PYTHON_VERSION = 
RANLIB = arm-brcm-linux-uclibcgnueabi-ranlib
RC = 
R_DYNAMIC_LDFLAG = 
SED = /bin/sed
SELINUX_LIBS = 
SET_MAKE = 
SHELL = /bin/sh
STRIP = arm-brcm-linux-uclibcgnueabi-strip
SYSTEMD_CFLAGS = 
SYSTEMD_LIBS = 
TEST_BUS_BINARY = 
TEST_LAUNCH_HELPER_BINARY = /home/tab/r6300/V1.0.0.88_1.0.14/ap/gpl/iserver/dbus-1.6.8/bus/dbus-daemon-launch-helper-test
TEST_LISTEN = unix:tmpdir=/tmp
TEST_SOCKET_DIR = /tmp
THREAD_LIBS = -lpthread
VALGRIND_CFLAGS = 
VALGRIND_LIBS = 
VERSION = 1.6.8
WINDRES = 
XMKMF = 
XMLTO = no
XML_CFLAGS = 
XML_LIBS = -lexpat
XSLTPROC = xsltproc
X_CFLAGS =  -I/usr/include
X_EXTRA_LIBS = 
X_LIBS =  -L/usr/lib
X_PRE_LIBS = 
abs_builddir = /home/tab/r6300/V1.0.0.88_1.0.14/ap/gpl/iserver/dbus-1.6.8/doc
abs_srcdir = /home/tab/r6300/V1.0.0.88_1.0.14/ap/gpl/iserver/dbus-1.6.8/doc
abs_top_builddir = /home/tab/r6300/V1.0.0.88_1.0.14/ap/gpl/iserver/dbus-1.6.8
abs_top_srcdir = /home/tab/r6300/V1.0.0.88_1.0.14/ap/gpl/iserver/dbus-1.6.8
ac_ct_AR = 
ac_ct_CC = 
ac_ct_CXX = g++
ac_ct_DUMPBIN = 
am__include = include
am__leading_dot = .
am__quote = 
am__tar = tar --format=ustar -chf - "$$tardir"
am__untar = tar -xf -
bindir = ${exec_prefix}/bin
build = i686-pc-linux-gnu
build_alias = 
build_cpu = i686
build_os = linux-gnu
build_vendor = pc
builddir = .
datadir = ${datarootdir}
datarootdir = ${prefix}/share
docdir = ${datarootdir}/doc/${PACKAGE_TARNAME}
dvidir = ${docdir}
exec_prefix = ${prefix}
host = arm-unknown-linux-gnu
host_alias = arm-linux
host_cpu = arm
host_os = linux-gnu
host_vendor = unknown
htmldir = ${docdir}
includedir = ${prefix}/include
infodir = ${datarootdir}/info
install_sh = ${SHELL} /home/tab/r6300/V1.0.0.88_1.0.14/ap/gpl/iserver/dbus-1.6.8/install-sh
libdir = ${exec_prefix}/lib
libexecdir = ${exec_prefix}/libexec
localedir = ${datarootdir}/locale
localstatedir = ${prefix}/var
mandir = ${datarootdir}/man
mkdir_p = /bin/mkdir -p
oldincludedir = /usr/include
pdfdir = ${docdir}
pkgpyexecdir = 
pkgpythondir = 
prefix = /usr
program_transform_name = s,x,x,
psdir = ${docdir}
pyexecdir = 
pythondir = 
sbindir = ${exec_prefix}/sbin
sharedstatedir = ${prefix}/com
srcdir = .
sysconfdir = ${prefix}/etc
systemdsystemunitdir = 
target_alias = 
top_build_prefix = ../
top_builddir = ..
top_srcdir = ..
apidir = ${docdir}/api

# automake normally assumes that man pages are generated files;
# these ones aren't, so we need the dist_ prefix to say that they're
# their own source code
dist_man1_MANS = \
	dbus-cleanup-sockets.1 \
	dbus-launch.1 \
	dbus-monitor.1 \
	dbus-send.1 \
	dbus-uuidgen.1


# on the other hand, this one is generated
man1_MANS = \
	dbus-daemon.1

MAN_IN_FILES = dbus-daemon.1.in
MAN_HTML_FILES = \
	dbus-cleanup-sockets.1.html \
	dbus-daemon.1.html \
	dbus-launch.1.html \
	dbus-monitor.1.html \
	dbus-send.1.html \
	dbus-uuidgen.1.html

DTDS = \
	busconfig.dtd \
	introspect.dtd

dist_doc_DATA = system-activation.txt

# uploaded and distributed, but not installed
STATIC_DOCS = \
	dbus-faq.xml \
	dbus-specification.xml \
	dbus-test-plan.xml \
	dbus-tutorial.xml \
	dcop-howto.txt \
	introspect.xsl \
	$(DTDS)

EXTRA_DIST = \
	file-boilerplate.c \
	doxygen_to_devhelp.xsl \
	$(STATIC_DOCS) \
	$(MAN_IN_FILES)

html_DATA = $(am__append_1) $(am__append_2)

# we distribute these in the tarball so users don't necessarily need xmlto
dist_html_DATA = $(STATIC_HTML) $(XMLTO_OUTPUT)

# diagram.png/diagram.svg aren't really HTML, but must go in the same
# directory as the HTML to avoid broken links
STATIC_HTML = \
	diagram.png \
	diagram.svg \
	$(NULL)

XMLTO_OUTPUT = \
	dbus-faq.html				\
	dbus-specification.html			\
	dbus-test-plan.html			\
	dbus-tutorial.html

#BONUS_FILES = \
#	$(top_srcdir)/README \
#	$(top_srcdir)/HACKING \
#	$(top_srcdir)/AUTHORS \
#	$(top_srcdir)/NEWS \
#	$(top_srcdir)/COPYING \
#	$(top_srcdir)/ChangeLog

#DOC_SERVER = dbus.freedesktop.org
#DOC_WWW_DIR = /srv/dbus.freedesktop.org/www
#SPECIFICATION_SERVER = specifications.freedesktop.org
#SPECIFICATION_PATH = /srv/specifications.freedesktop.org/www/dbus/1.0
all: all-am

.SUFFIXES:
$(srcdir)/Makefile.in:  $(srcdir)/Makefile.am  $(am__configure_deps)
	@for dep in $?; do \
	  case '$(am__configure_deps)' in \
	    *$$dep*) \
	      ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
	        && { if test -f $@; then exit 0; else break; fi; }; \
	      exit 1;; \
	  esac; \
	done; \
	echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu doc/Makefile'; \
	$(am__cd) $(top_srcdir) && \
	  $(AUTOMAKE) --gnu doc/Makefile
.PRECIOUS: Makefile
Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
	@case '$?' in \
	  *config.status*) \
	    cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
	  *) \
	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
	    cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
	esac;

$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh

$(top_srcdir)/configure:  $(am__configure_deps)
	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
$(ACLOCAL_M4):  $(am__aclocal_m4_deps)
	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
$(am__aclocal_m4_deps):
dbus-daemon.1: $(top_builddir)/config.status $(srcdir)/dbus-daemon.1.in
	cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@

mostlyclean-libtool:
	-rm -f *.lo

clean-libtool:
	-rm -rf .libs _libs
install-man1: $(dist_man1_MANS) $(man1_MANS)
	@$(NORMAL_INSTALL)
	test -z "$(man1dir)" || $(MKDIR_P) "$(DESTDIR)$(man1dir)"
	@list='$(dist_man1_MANS) $(man1_MANS)'; test -n "$(man1dir)" || exit 0; \
	{ for i in $$list; do echo "$$i"; done; \
	} | while read p; do \
	  if test -f $$p; then d=; else d="$(srcdir)/"; fi; \
	  echo "$$d$$p"; echo "$$p"; \
	done | \
	sed -e 'n;s,.*/,,;p;h;s,.*\.,,;s,^[^1][0-9a-z]*$$,1,;x' \
	      -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,' | \
	sed 'N;N;s,\n, ,g' | { \
	list=; while read file base inst; do \
	  if test "$$base" = "$$inst"; then list="$$list $$file"; else \
	    echo " $(INSTALL_DATA) '$$file' '$(DESTDIR)$(man1dir)/$$inst'"; \
	    $(INSTALL_DATA) "$$file" "$(DESTDIR)$(man1dir)/$$inst" || exit $$?; \
	  fi; \
	done; \
	for i in $$list; do echo "$$i"; done | $(am__base_list) | \
	while read files; do \
	  test -z "$$files" || { \
	    echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(man1dir)'"; \
	    $(INSTALL_DATA) $$files "$(DESTDIR)$(man1dir)" || exit $$?; }; \
	done; }

uninstall-man1:
	@$(NORMAL_UNINSTALL)
	@list='$(dist_man1_MANS) $(man1_MANS)'; test -n "$(man1dir)" || exit 0; \
	files=`{ for i in $$list; do echo "$$i"; done; \
	} | sed -e 's,.*/,,;h;s,.*\.,,;s,^[^1][0-9a-z]*$$,1,;x' \
	      -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,'`; \
	test -z "$$files" || { \
	  echo " ( cd '$(DESTDIR)$(man1dir)' && rm -f" $$files ")"; \
	  cd "$(DESTDIR)$(man1dir)" && rm -f $$files; }
install-dist_docDATA: $(dist_doc_DATA)
	@$(NORMAL_INSTALL)
	test -z "$(docdir)" || $(MKDIR_P) "$(DESTDIR)$(docdir)"
	@list='$(dist_doc_DATA)'; test -n "$(docdir)" || list=; \
	for p in $$list; do \
	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
	  echo "$$d$$p"; \
	done | $(am__base_list) | \
	while read files; do \
	  echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(docdir)'"; \
	  $(INSTALL_DATA) $$files "$(DESTDIR)$(docdir)" || exit $$?; \
	done

uninstall-dist_docDATA:
	@$(NORMAL_UNINSTALL)
	@list='$(dist_doc_DATA)'; test -n "$(docdir)" || list=; \
	files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
	test -n "$$files" || exit 0; \
	echo " ( cd '$(DESTDIR)$(docdir)' && rm -f" $$files ")"; \
	cd "$(DESTDIR)$(docdir)" && rm -f $$files
install-dist_htmlDATA: $(dist_html_DATA)
	@$(NORMAL_INSTALL)
	test -z "$(htmldir)" || $(MKDIR_P) "$(DESTDIR)$(htmldir)"
	@list='$(dist_html_DATA)'; test -n "$(htmldir)" || list=; \
	for p in $$list; do \
	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
	  echo "$$d$$p"; \
	done | $(am__base_list) | \
	while read files; do \
	  echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(htmldir)'"; \
	  $(INSTALL_DATA) $$files "$(DESTDIR)$(htmldir)" || exit $$?; \
	done

uninstall-dist_htmlDATA:
	@$(NORMAL_UNINSTALL)
	@list='$(dist_html_DATA)'; test -n "$(htmldir)" || list=; \
	files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
	test -n "$$files" || exit 0; \
	echo " ( cd '$(DESTDIR)$(htmldir)' && rm -f" $$files ")"; \
	cd "$(DESTDIR)$(htmldir)" && rm -f $$files
install-htmlDATA: $(html_DATA)
	@$(NORMAL_INSTALL)
	test -z "$(htmldir)" || $(MKDIR_P) "$(DESTDIR)$(htmldir)"
	@list='$(html_DATA)'; test -n "$(htmldir)" || list=; \
	for p in $$list; do \
	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
	  echo "$$d$$p"; \
	done | $(am__base_list) | \
	while read files; do \
	  echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(htmldir)'"; \
	  $(INSTALL_DATA) $$files "$(DESTDIR)$(htmldir)" || exit $$?; \
	done

uninstall-htmlDATA:
	@$(NORMAL_UNINSTALL)
	@list='$(html_DATA)'; test -n "$(htmldir)" || list=; \
	files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
	test -n "$$files" || exit 0; \
	echo " ( cd '$(DESTDIR)$(htmldir)' && rm -f" $$files ")"; \
	cd "$(DESTDIR)$(htmldir)" && rm -f $$files
tags: TAGS
TAGS:

ctags: CTAGS
CTAGS:


distdir: $(DISTFILES)
	@list='$(MANS)'; if test -n "$$list"; then \
	  list=`for p in $$list; do \
	    if test -f $$p; then d=; else d="$(srcdir)/"; fi; \
	    if test -f "$$d$$p"; then echo "$$d$$p"; else :; fi; done`; \
	  if test -n "$$list" && \
	    grep 'ab help2man is required to generate this page' $$list >/dev/null; then \
	    echo "error: found man pages containing the \`missing help2man' replacement text:" >&2; \
	    grep -l 'ab help2man is required to generate this page' $$list | sed 's/^/         /' >&2; \
	    echo "       to fix them, install help2man, remove and regenerate the man pages;" >&2; \
	    echo "       typically \`make maintainer-clean' will remove them" >&2; \
	    exit 1; \
	  else :; fi; \
	else :; fi
	@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
	list='$(DISTFILES)'; \
	  dist_files=`for file in $$list; do echo $$file; done | \
	  sed -e "s|^$$srcdirstrip/||;t" \
	      -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
	case $$dist_files in \
	  */*) $(MKDIR_P) `echo "$$dist_files" | \
			   sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
			   sort -u` ;; \
	esac; \
	for file in $$dist_files; do \
	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
	  if test -d $$d/$$file; then \
	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
	    if test -d "$(distdir)/$$file"; then \
	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
	    fi; \
	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
	    fi; \
	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
	  else \
	    test -f "$(distdir)/$$file" \
	    || cp -p $$d/$$file "$(distdir)/$$file" \
	    || exit 1; \
	  fi; \
	done
check-am: all-am
check: check-am
#all-local:
all-am: Makefile $(MANS) $(DATA) all-local
installdirs:
	for dir in "$(DESTDIR)$(man1dir)" "$(DESTDIR)$(docdir)" "$(DESTDIR)$(htmldir)" "$(DESTDIR)$(htmldir)"; do \
	  test -z "$$dir" || $(MKDIR_P) "$$dir"; \
	done
install: install-am
install-exec: install-exec-am
install-data: install-data-am
uninstall: uninstall-am

install-am: all-am
	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am

installcheck: installcheck-am
install-strip:
	$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
	  install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
	  `test -z '$(STRIP)' || \
	    echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
mostlyclean-generic:

clean-generic:

distclean-generic:
	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)

maintainer-clean-generic:
	@echo "This command is intended for maintainers to use"
	@echo "it deletes files that may require special tools to rebuild."
#uninstall-local:
#install-data-local:
clean: clean-am

clean-am: clean-generic clean-libtool clean-local mostlyclean-am

distclean: distclean-am
	-rm -f Makefile
distclean-am: clean-am distclean-generic

dvi: dvi-am

dvi-am:

html: html-am

html-am:

info: info-am

info-am:

install-data-am: install-data-local install-dist_docDATA \
	install-dist_htmlDATA install-htmlDATA install-man

install-dvi: install-dvi-am

install-dvi-am:

install-exec-am:

install-html: install-html-am

install-html-am:

install-info: install-info-am

install-info-am:

install-man: install-man1

install-pdf: install-pdf-am

install-pdf-am:

install-ps: install-ps-am

install-ps-am:

installcheck-am:

maintainer-clean: maintainer-clean-am
	-rm -f Makefile
maintainer-clean-am: distclean-am maintainer-clean-generic \
	maintainer-clean-local

mostlyclean: mostlyclean-am

mostlyclean-am: mostlyclean-generic mostlyclean-libtool

pdf: pdf-am

pdf-am:

ps: ps-am

ps-am:

uninstall-am: uninstall-dist_docDATA uninstall-dist_htmlDATA \
	uninstall-htmlDATA uninstall-local uninstall-man

uninstall-man: uninstall-man1

.MAKE: install-am install-strip

.PHONY: all all-am all-local check check-am clean clean-generic \
	clean-libtool clean-local distclean distclean-generic \
	distclean-libtool distdir dvi dvi-am html html-am info info-am \
	install install-am install-data install-data-am \
	install-data-local install-dist_docDATA install-dist_htmlDATA \
	install-dvi install-dvi-am install-exec install-exec-am \
	install-html install-html-am install-htmlDATA install-info \
	install-info-am install-man install-man1 install-pdf \
	install-pdf-am install-ps install-ps-am install-strip \
	installcheck installcheck-am installdirs maintainer-clean \
	maintainer-clean-generic maintainer-clean-local mostlyclean \
	mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \
	uninstall uninstall-am uninstall-dist_docDATA \
	uninstall-dist_htmlDATA uninstall-htmlDATA uninstall-local \
	uninstall-man uninstall-man1


#dbus-specification.html: dbus-specification.xml
#	$(XMLTO) html-nochunks $<

#dbus-test-plan.html: dbus-test-plan.xml
#	$(XMLTO) html-nochunks $<

#dbus-tutorial.html: dbus-tutorial.xml
#	$(XMLTO) html-nochunks $<

#dbus-faq.html: dbus-faq.xml
#	$(XMLTO) html-nochunks $<

all-local:: doxygen.stamp

doxygen.stamp: $(wildcard $(top_srcdir)/dbus/*.[ch])
	$(AM_V_GEN)cd $(top_builddir) && doxygen Doxyfile
	@touch $@

dbus.devhelp: $(srcdir)/doxygen_to_devhelp.xsl doxygen.stamp
	$(XSLTPROC) -o $@ $< api/xml/index.xml

# this assumes CREATE_SUBDIRS isn't set to YES in Doxyfile
# (which it isn't currently)
install-data-local:: doxygen.stamp
	$(MKDIR_P) $(DESTDIR)$(apidir)
	$(INSTALL_DATA) api/html/* $(DESTDIR)$(apidir)

uninstall-local::
	rm -f $(DESTDIR)$(apidir)/*.html
	rm -f $(DESTDIR)$(apidir)/*.png
	rm -f $(DESTDIR)$(apidir)/*.css
	rm -f $(DESTDIR)$(apidir)/*.js
	rm -f $(DESTDIR)$(htmldir)/*.html
	rm -f $(DESTDIR)$(docdir)/*.txt
	rm -f $(DESTDIR)$(htmldir)/*.png
	rm -f $(DESTDIR)$(htmldir)/*.svg
	rmdir --ignore-fail-on-non-empty $(DESTDIR)$(apidir) || \
		rmdir $(DESTDIR)$(apidir)

%.1.html: %.1
	$(AM_V_GEN)( $(MAN2HTML) < $< > $@.tmp && mv $@.tmp $@ )

#dbus-docs: $(STATIC_DOCS) $(dist_doc_DATA) $(dist_html_DATA) $(MAN_HTML_FILES) $(BONUS_FILES) doxygen.stamp
#	$(AM_V_at)rm -rf $@ $@.tmp
#	$(AM_V_GEN)$(MKDIR_P) $@.tmp/api
#	$(AM_V_at)cd $(srcdir) && cp $(STATIC_DOCS) /home/tab/r6300/V1.0.0.88_1.0.14/ap/gpl/iserver/dbus-1.6.8/doc/$@.tmp
#	$(AM_V_at)cd $(srcdir) && cp $(dist_doc_DATA) /home/tab/r6300/V1.0.0.88_1.0.14/ap/gpl/iserver/dbus-1.6.8/doc/$@.tmp
#	$(AM_V_at)cd $(srcdir) && cp $(STATIC_HTML) /home/tab/r6300/V1.0.0.88_1.0.14/ap/gpl/iserver/dbus-1.6.8/doc/$@.tmp
#	$(AM_V_at)cp $(XMLTO_OUTPUT) /home/tab/r6300/V1.0.0.88_1.0.14/ap/gpl/iserver/dbus-1.6.8/doc/$@.tmp
#	$(AM_V_at)cp $(MAN_HTML_FILES) /home/tab/r6300/V1.0.0.88_1.0.14/ap/gpl/iserver/dbus-1.6.8/doc/$@.tmp
#	$(AM_V_at)cp $(BONUS_FILES) /home/tab/r6300/V1.0.0.88_1.0.14/ap/gpl/iserver/dbus-1.6.8/doc/$@.tmp
#	$(AM_V_at)cp -r api/html /home/tab/r6300/V1.0.0.88_1.0.14/ap/gpl/iserver/dbus-1.6.8/doc/$@.tmp/api
#	$(AM_V_at)mv $@.tmp $@

#dbus-docs.tar.gz: dbus-docs
#	$(AM_V_GEN)tar czf $@ $<

#maintainer-upload-docs: dbus-docs.tar.gz dbus-docs
#	scp dbus-docs.tar.gz $(DOC_SERVER):$(DOC_WWW_DIR)/
#	rsync -rpvzP --chmod=Dg+s,ug+rwX,o=rX \
#		dbus-docs/ $(DOC_SERVER):$(DOC_WWW_DIR)/doc/
#	cd $(srcdir) && scp -p $(DTDS) $(SPECIFICATION_SERVER):$(SPECIFICATION_PATH)/
maintainer-upload-docs:
	@echo "Can't upload documentation! Re-run configure with"
	@echo "  --enable-doxygen-docs --enable-xml-docs"
	@echo "and ensure that man2html is installed."
	@false

clean-local:
	rm -f $(html_DATA)
	rm -rf api
	rm -rf dbus-docs dbus-docs.tmp
	rm -f *.1.html
	rm -f doxygen.stamp

maintainer-clean-local:
	rm -f $(XMLTO_OUTPUT)

# Tell versions [3.59,3.63) of GNU make to not export all variables.
# Otherwise a system limit (for SysV at least) may be exceeded.
.NOEXPORT: