// // This file is part of the aMule Project. // // Copyright (c) 2004-2011 Angel Vidal ( kry@amule.org ) // Copyright (c) 2003-2011 aMule Team ( admin@amule.org / http://www.amule.org ) // // Any parts of this program derived from the xMule, lMule or eMule project, // or contributed by third-party developers are copyrighted by their // respective authors. // // This program is free software; you can redistribute it and/or modify // it under the terms of the GNU General Public License as published by // the Free Software Foundation; either version 2 of the License, or // (at your option) any later version. // // This program is distributed in the hope that it will be useful, // but WITHOUT ANY WARRANTY; without even the implied warranty of // MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the // GNU General Public License for more details. // // You should have received a copy of the GNU General Public License // along with this program; if not, write to the Free Software // Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301, USA // // Kry - Modified version of the original SHA.cpp to work on linux and // use wxWidgets. Original license follows. // /* --------------------------------------------------------------------------- Copyright (c) 2002-2011 Dr Brian Gladman ( brg@gladman.me.uk ) All rights reserved. LICENSE TERMS The free distribution and use of this software in both source and binary form is allowed (with or without changes) provided that: 1. distributions of this source code include the above copyright notice, this list of conditions and the following disclaimer; 2. distributions in binary form include the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other associated materials; 3. the copyright holder's name is not used to endorse products built using this software without specific written permission. ALTERNATIVELY, provided that this notice is retained in full, this product may be distributed under the terms of the GNU General Public License (GPL), in which case the provisions of the GPL apply INSTEAD OF those given above. DISCLAIMER This software is provided 'as is' with no explicit or implied warranties in respect of its properties, including, but not limited to, correctness and/or fitness for purpose. --------------------------------------------------------------------------- Issue Date: 30/11/2002 This is a byte oriented version of SHA1 that operates on arrays of bytes stored in memory. It runs at 22 cycles per byte on a Pentium P4 processor */ #include "SHA.h" CSHA::CSHA() { Reset(); } /* To obtain the highest speed on processors with 32-bit words, this code needs to determine the order in which bytes are packed into such words. The following block of code is an attempt to capture the most obvious ways in which various environemnts specify their endian definitions. It may well fail, in which case the definitions will need to be set by editing at the points marked **** EDIT HERE IF NECESSARY **** below. */ #define SHA_LITTLE_ENDIAN 1234 /* byte 0 is least significant (i386) */ #define SHA_BIG_ENDIAN 4321 /* byte 0 is most significant (mc68k) */ #define rotl32(x,n) (((x) << n) | ((x) >> (32 - n))) #if (wxBYTE_ORDER == wxBIG_ENDIAN) #define swap_b32(x) (x) #elif defined(bswap_32) #define swap_b32(x) bswap_32(x) #else #define swap_b32(x) ((rotl32((x), 8) & 0x00ff00ff) | (rotl32((x), 24) & 0xff00ff00)) #endif #define SHA1_MASK (SHA1_BLOCK_SIZE - 1) /* reverse byte order in 32-bit words */ #define ch(x,y,z) (((x) & (y)) ^ (~(x) & (z))) #define parity(x,y,z) ((x) ^ (y) ^ (z)) #define maj(x,y,z) (((x) & (y)) ^ ((x) & (z)) ^ ((y) & (z))) /* A normal version as set out in the FIPS. This version uses */ /* partial loop unrolling and is optimised for the Pentium 4 */ #define rnd(f,k) t = a; a = rotl32(a,5) + f(b,c,d) + e + k + w[i]; e = d; d = c; c = rotl32(b, 30); b = t void CSHA::Compile() { uint32 w[80], i, a, b, c, d, e, t; /* note that words are compiled from the buffer into 32-bit */ /* words in big-endian order so an order reversal is needed */ /* here on little endian machines */ for(i = 0; i < SHA1_BLOCK_SIZE / 4; ++i) w[i] = swap_b32(m_nBuffer[i]); for(i = SHA1_BLOCK_SIZE / 4; i < 80; ++i) w[i] = rotl32(w[i - 3] ^ w[i - 8] ^ w[i - 14] ^ w[i - 16], 1); a = m_nHash[0]; b = m_nHash[1]; c = m_nHash[2]; d = m_nHash[3]; e = m_nHash[4]; for(i = 0; i < 20; ++i) { rnd(ch, 0x5a827999); } for(i = 20; i < 40; ++i) { rnd(parity, 0x6ed9eba1); } for(i = 40; i < 60; ++i) { rnd(maj, 0x8f1bbcdc); } for(i = 60; i < 80; ++i) { rnd(parity, 0xca62c1d6); } m_nHash[0] += a; m_nHash[1] += b; m_nHash[2] += c; m_nHash[3] += d; m_nHash[4] += e; } void CSHA::Reset() { m_nCount[0] = m_nCount[1] = 0; m_nHash[0] = 0x67452301; m_nHash[1] = 0xefcdab89; m_nHash[2] = 0x98badcfe; m_nHash[3] = 0x10325476; m_nHash[4] = 0xc3d2e1f0; } void CSHA::GetHash(CAICHHash& Hash) { /* extract the hash value as bytes in case the hash buffer is */ /* misaligned for 32-bit words*/ wxASSERT( Hash.GetHashSize() == 20 ); for(int i = 0; i < SHA1_DIGEST_SIZE; ++i) Hash.GetRawHash()[i] = (unsigned char)(m_nHash[i >> 2] >> 8 * (~i & 3)); } /* SHA1 hash data in an array of bytes into hash buffer and call the */ /* hash_compile function as required. */ void CSHA::Add(const void* pData, uint32 nLength) { const unsigned char* data = (const unsigned char*)pData; uint32 pos = (uint32)(m_nCount[0] & SHA1_MASK), space = SHA1_BLOCK_SIZE - pos; const unsigned char *sp = data; if((m_nCount[0] += nLength) < nLength) ++(m_nCount[1]); while(nLength >= space) /* tranfer whole blocks while possible */ { memcpy(((unsigned char*)m_nBuffer) + pos, sp, space); sp += space; nLength -= space; space = SHA1_BLOCK_SIZE; pos = 0; Compile(); } memcpy(((unsigned char*)m_nBuffer) + pos, sp, nLength); } /* SHA1 final padding and digest calculation */ #if (wxBYTE_ORDER == wxLITTLE_ENDIAN) static uint32 mask[4] = { 0x00000000, 0x000000ff, 0x0000ffff, 0x00ffffff }; static uint32 bits[4] = { 0x00000080, 0x00008000, 0x00800000, 0x80000000 }; #else static uint32 mask[4] = { 0x00000000, 0xff000000, 0xffff0000, 0xffffff00 }; static uint32 bits[4] = { 0x80000000, 0x00800000, 0x00008000, 0x00000080 }; #endif void CSHA::Finish(CAICHHash& Hash) { uint32 i = (uint32)(m_nCount[0] & SHA1_MASK); /* mask out the rest of any partial 32-bit word and then set */ /* the next byte to 0x80. On big-endian machines any bytes in */ /* the buffer will be at the top end of 32 bit words, on little */ /* endian machines they will be at the bottom. Hence the AND */ /* and OR masks above are reversed for little endian systems */ /* Note that we can always add the first padding byte at this */ /* because the buffer always contains at least one empty slot */ m_nBuffer[i >> 2] = (m_nBuffer[i >> 2] & mask[i & 3]) | bits[i & 3]; /* we need 9 or more empty positions, one for the padding byte */ /* (above) and eight for the length count. If there is not */ /* enough space pad and empty the buffer */ if(i > SHA1_BLOCK_SIZE - 9) { if(i < 60) m_nBuffer[15] = 0; Compile(); i = 0; } else /* compute a word index for the empty buffer positions */ i = (i >> 2) + 1; while(i < 14) /* and zero pad all but last two positions */ m_nBuffer[i++] = 0; /* assemble the eight byte counter in in big-endian format */ m_nBuffer[14] = swap_b32((m_nCount[1] << 3) | (m_nCount[0] >> 29)); m_nBuffer[15] = swap_b32(m_nCount[0] << 3); Compile(); GetHash(Hash); } // File_checked_for_headers