/* $NetBSD: ukbd.c,v 1.39 1999/08/14 14:49:32 augustss Exp $ */ /* * Copyright (c) 1998 The NetBSD Foundation, Inc. * All rights reserved. * * This code is derived from software contributed to The NetBSD Foundation * by Lennart Augustsson (augustss@carlstedt.se) at * Carlstedt Research & Technology. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. All advertising materials mentioning features or use of this software * must display the following acknowledgement: * This product includes software developed by the NetBSD * Foundation, Inc. and its contributors. * 4. Neither the name of The NetBSD Foundation nor the names of its * contributors may be used to endorse or promote products derived * from this software without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE * POSSIBILITY OF SUCH DAMAGE. */ /* * HID spec: http://www.usb.org/developers/data/usbhid10.pdf */ #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include "opt_wsdisplay_compat.h" #ifdef USB_DEBUG #define DPRINTF(x) if (ukbddebug) logprintf x #define DPRINTFN(n,x) if (ukbddebug>(n)) logprintf x int ukbddebug = 0; #else #define DPRINTF(x) #define DPRINTFN(n,x) #endif #define UPROTO_BOOT_KEYBOARD 1 #define NKEYCODE 6 #define NUM_LOCK 0x01 #define CAPS_LOCK 0x02 #define SCROLL_LOCK 0x04 struct ukbd_data { u_int8_t modifiers; #define MOD_CONTROL_L 0x01 #define MOD_CONTROL_R 0x10 #define MOD_SHIFT_L 0x02 #define MOD_SHIFT_R 0x20 #define MOD_ALT_L 0x04 #define MOD_ALT_R 0x40 #define MOD_WIN_L 0x08 #define MOD_WIN_R 0x80 u_int8_t reserved; u_int8_t keycode[NKEYCODE]; }; #define PRESS 0x000 #define RELEASE 0x100 #define CODEMASK 0x0ff /* Translate USB bitmap to USB keycode. */ #define NMOD 8 static struct { int mask, key; } ukbd_mods[NMOD] = { { MOD_CONTROL_L, 224 }, { MOD_CONTROL_R, 228 }, { MOD_SHIFT_L, 225 }, { MOD_SHIFT_R, 229 }, { MOD_ALT_L, 226 }, { MOD_ALT_R, 230 }, { MOD_WIN_L, 227 }, { MOD_WIN_R, 231 }, }; #if defined(__NetBSD__) && defined(WSDISPLAY_COMPAT_RAWKBD) #define NN 0 /* no translation */ /* * Translate USB keycodes to US keyboard XT scancodes. * Scancodes >= 128 represent EXTENDED keycodes. */ static u_int8_t ukbd_trtab[256] = { NN, NN, NN, NN, 30, 48, 46, 32, /* 00 - 07 */ 18, 33, 34, 35, 23, 36, 37, 38, /* 08 - 0F */ 50, 49, 24, 25, 16, 19, 31, 20, /* 10 - 17 */ 22, 47, 17, 45, 21, 44, 2, 3, /* 18 - 1F */ 4, 5, 6, 7, 8, 9, 10, 11, /* 20 - 27 */ 28, 1, 14, 15, 57, 12, 13, 26, /* 28 - 2F */ 27, 43, NN, 39, 40, 41, 51, 52, /* 30 - 37 */ 53, 58, 59, 60, 61, 62, 63, 64, /* 38 - 3F */ 65, 66, 67, 68, 87, 88, 170, 70, /* 40 - 47 */ 127, 210, 199, 201, 211, 207, 209, 205, /* 48 - 4F */ 203, 208, 200, 69, 181, 55, 74, 78, /* 50 - 57 */ 156, 79, 80, 81, 75, 76, 77, 71, /* 58 - 5F */ 72, 73, 82, 83, NN, 221, NN, NN, /* 60 - 67 */ NN, NN, NN, NN, NN, NN, NN, NN, /* 68 - 6F */ NN, NN, NN, NN, NN, NN, NN, NN, /* 70 - 77 */ NN, NN, NN, NN, NN, NN, NN, NN, /* 78 - 7F */ NN, NN, NN, NN, NN, NN, NN, NN, /* 80 - 87 */ NN, NN, NN, NN, NN, NN, NN, NN, /* 88 - 8F */ NN, NN, NN, NN, NN, NN, NN, NN, /* 90 - 97 */ NN, NN, NN, NN, NN, NN, NN, NN, /* 98 - 9F */ NN, NN, NN, NN, NN, NN, NN, NN, /* A0 - A7 */ NN, NN, NN, NN, NN, NN, NN, NN, /* A8 - AF */ NN, NN, NN, NN, NN, NN, NN, NN, /* B0 - B7 */ NN, NN, NN, NN, NN, NN, NN, NN, /* B8 - BF */ NN, NN, NN, NN, NN, NN, NN, NN, /* C0 - C7 */ NN, NN, NN, NN, NN, NN, NN, NN, /* C8 - CF */ NN, NN, NN, NN, NN, NN, NN, NN, /* D0 - D7 */ NN, NN, NN, NN, NN, NN, NN, NN, /* D8 - DF */ 29, 42, 56, 219, 157, 54, 184,220, /* E0 - E7 */ NN, NN, NN, NN, NN, NN, NN, NN, /* E8 - EF */ NN, NN, NN, NN, NN, NN, NN, NN, /* F0 - F7 */ NN, NN, NN, NN, NN, NN, NN, NN, /* F8 - FF */ }; #endif /* defined(__NetBSD__) && defined(WSDISPLAY_COMPAT_RAWKBD) */ #define KEY_ERROR 0x01 #define MAXKEYS (NMOD+2*NKEYCODE) struct ukbd_softc { bdevice sc_dev; /* base device */ usbd_interface_handle sc_iface; /* interface */ usbd_pipe_handle sc_intrpipe; /* interrupt pipe */ int sc_ep_addr; struct ukbd_data sc_ndata; struct ukbd_data sc_odata; char sc_enabled; int sc_console_keyboard; /* we are the console keyboard */ int sc_leds; #if defined(__NetBSD__) struct device *sc_wskbddev; #if defined(WSDISPLAY_COMPAT_RAWKBD) #define REP_DELAY1 400 #define REP_DELAYN 100 int sc_rawkbd; int sc_nrep; char sc_rep[MAXKEYS]; #endif /* defined(WSDISPLAY_COMPAT_RAWKBD) */ int sc_polling; int sc_npollchar; u_int16_t sc_pollchars[MAXKEYS]; #endif /* defined(__NetBSD__) */ }; #define UKBDUNIT(dev) (minor(dev)) #define UKBD_CHUNK 128 /* chunk size for read */ #define UKBD_BSIZE 1020 /* buffer size */ int ukbd_is_console; void ukbd_cngetc __P((void *, u_int *, int *)); void ukbd_cnpollc __P((void *, int)); #if defined(__NetBSD__) const struct wskbd_consops ukbd_consops = { ukbd_cngetc, ukbd_cnpollc, }; #endif void ukbd_intr __P((usbd_request_handle, usbd_private_handle, usbd_status)); int ukbd_enable __P((void *, int)); void ukbd_set_leds __P((void *, int)); #if defined(__NetBSD__) int ukbd_ioctl __P((void *, u_long, caddr_t, int, struct proc *)); void ukbd_rawrepeat __P((void *v)); const struct wskbd_accessops ukbd_accessops = { ukbd_enable, ukbd_set_leds, ukbd_ioctl, }; extern const struct wscons_keydesc ukbd_keydesctab[]; const struct wskbd_mapdata ukbd_keymapdata = { ukbd_keydesctab, KB_US, }; #endif USB_DECLARE_DRIVER(ukbd); USB_MATCH(ukbd) { USB_MATCH_START(ukbd, uaa); usb_interface_descriptor_t *id; /* Check that this is a keyboard that speaks the boot protocol. */ if (!uaa->iface) return (UMATCH_NONE); id = usbd_get_interface_descriptor(uaa->iface); if (!id || id->bInterfaceClass != UCLASS_HID || id->bInterfaceSubClass != USUBCLASS_BOOT || id->bInterfaceProtocol != UPROTO_BOOT_KEYBOARD) return (UMATCH_NONE); return (UMATCH_IFACECLASS_IFACESUBCLASS_IFACEPROTO); } USB_ATTACH(ukbd) { USB_ATTACH_START(ukbd, sc, uaa); usbd_interface_handle iface = uaa->iface; usb_interface_descriptor_t *id; usb_endpoint_descriptor_t *ed; usbd_status r; char devinfo[1024]; #if defined(__NetBSD__) struct wskbddev_attach_args a; #else int i; #endif sc->sc_iface = iface; id = usbd_get_interface_descriptor(iface); usbd_devinfo(uaa->device, 0, devinfo); USB_ATTACH_SETUP; printf("%s: %s, iclass %d/%d\n", USBDEVNAME(sc->sc_dev), devinfo, id->bInterfaceClass, id->bInterfaceSubClass); ed = usbd_interface2endpoint_descriptor(iface, 0); if (!ed) { printf("%s: could not read endpoint descriptor\n", USBDEVNAME(sc->sc_dev)); USB_ATTACH_ERROR_RETURN; } DPRINTFN(10,("ukbd_attach: bLength=%d bDescriptorType=%d " "bEndpointAddress=%d-%s bmAttributes=%d wMaxPacketSize=%d" " bInterval=%d\n", ed->bLength, ed->bDescriptorType, ed->bEndpointAddress & UE_ADDR, ed->bEndpointAddress & UE_IN ? "in" : "out", ed->bmAttributes & UE_XFERTYPE, UGETW(ed->wMaxPacketSize), ed->bInterval)); if ((ed->bEndpointAddress & UE_IN) != UE_IN || (ed->bmAttributes & UE_XFERTYPE) != UE_INTERRUPT) { printf("%s: unexpected endpoint\n", USBDEVNAME(sc->sc_dev)); USB_ATTACH_ERROR_RETURN; } if ((usbd_get_quirks(uaa->device)->uq_flags & UQ_NO_SET_PROTO) == 0) { r = usbd_set_protocol(iface, 0); DPRINTFN(5, ("ukbd_attach: protocol set\n")); if (r != USBD_NORMAL_COMPLETION) { printf("%s: set protocol failed\n", USBDEVNAME(sc->sc_dev)); USB_ATTACH_ERROR_RETURN; } } /* Ignore if SETIDLE fails since it is not crucial. */ usbd_set_idle(iface, 0, 0); sc->sc_ep_addr = ed->bEndpointAddress; /* * Remember if we're the console keyboard. * * XXX This always picks the first keyboard on the * first USB bus, but what else can we really do? */ if ((sc->sc_console_keyboard = ukbd_is_console) != 0) { /* Don't let any other keyboard have it. */ ukbd_is_console = 0; } if (sc->sc_console_keyboard) { DPRINTF(("ukbd_attach: console keyboard sc=%p\n", sc)); wskbd_cnattach(&ukbd_consops, sc, &ukbd_keymapdata); ukbd_enable(sc, 1); } a.console = sc->sc_console_keyboard; a.keymap = &ukbd_keymapdata; a.accessops = &ukbd_accessops; a.accesscookie = sc; /* Flash the leds; no real purpose, just shows we're alive. */ ukbd_set_leds(sc, WSKBD_LED_SCROLL | WSKBD_LED_NUM | WSKBD_LED_CAPS); usbd_delay_ms(uaa->device, 400); ukbd_set_leds(sc, 0); sc->sc_wskbddev = config_found(self, &a, wskbddevprint); USB_ATTACH_SUCCESS_RETURN; } int ukbd_enable(v, on) void *v; int on; { struct ukbd_softc *sc = v; usbd_status r; /* Should only be called to change state */ if (sc->sc_enabled == on) { #ifdef DIAGNOSTIC printf("ukbd_enable: %s: bad call on=%d\n", USBDEVNAME(sc->sc_dev), on); #endif return (EBUSY); } DPRINTF(("ukbd_enable: sc=%p on=%d\n", sc, on)); if (on) { /* Set up interrupt pipe. */ r = usbd_open_pipe_intr(sc->sc_iface, sc->sc_ep_addr, USBD_SHORT_XFER_OK, &sc->sc_intrpipe, sc, &sc->sc_ndata, sizeof(sc->sc_ndata), ukbd_intr); if (r != USBD_NORMAL_COMPLETION) return (EIO); } else { /* Disable interrupts. */ usbd_abort_pipe(sc->sc_intrpipe); usbd_close_pipe(sc->sc_intrpipe); } sc->sc_enabled = on; return (0); } int ukbd_activate(self, act) struct device *self; enum devact act; { return (0); } int ukbd_detach(self, flags) struct device *self; int flags; { struct ukbd_softc *sc = (struct ukbd_softc *)self; int rv = 0; DPRINTF(("ukbd_detach: sc=%p flags=%d\n", sc, flags)); if (sc->sc_console_keyboard) { /* * XXX Should probably disconnect our consops, * XXX and either notify some other keyboard that * XXX it can now be the console, or if there aren't * XXX any more USB keyboards, set ukbd_is_console * XXX back to 1 so that the next USB keyboard attached * XXX to the system will get it. */ panic("ukbd_detach: console keyboard"); } /* No need to do reference counting of ums, wskbd has all the goo. */ if (sc->sc_wskbddev) rv = config_detach(sc->sc_wskbddev, flags); return (rv); } void ukbd_intr(reqh, addr, status) usbd_request_handle reqh; usbd_private_handle addr; usbd_status status; { struct ukbd_softc *sc = addr; struct ukbd_data *ud = &sc->sc_ndata; int mod, omod; u_int16_t ibuf[MAXKEYS]; /* chars events */ int s; int nkeys, i, j; int key; #define ADDKEY(c) ibuf[nkeys++] = (c) DPRINTFN(5, ("ukbd_intr: status=%d\n", status)); if (status == USBD_CANCELLED) return; if (status != USBD_NORMAL_COMPLETION) { DPRINTF(("ukbd_intr: status=%d\n", status)); usbd_clear_endpoint_stall_async(sc->sc_intrpipe); return; } DPRINTFN(5, (" mod=0x%02x key0=0x%02x key1=0x%02x\n", ud->modifiers, ud->keycode[0], ud->keycode[1])); if (ud->keycode[0] == KEY_ERROR) return; /* ignore */ nkeys = 0; mod = ud->modifiers; omod = sc->sc_odata.modifiers; if (mod != omod) for (i = 0; i < NMOD; i++) if (( mod & ukbd_mods[i].mask) != (omod & ukbd_mods[i].mask)) ADDKEY(ukbd_mods[i].key | (mod & ukbd_mods[i].mask ? PRESS : RELEASE)); if (memcmp(ud->keycode, sc->sc_odata.keycode, NKEYCODE) != 0) { /* Check for released keys. */ for (i = 0; i < NKEYCODE; i++) { key = sc->sc_odata.keycode[i]; if (key == 0) continue; for (j = 0; j < NKEYCODE; j++) if (key == ud->keycode[j]) goto rfound; ADDKEY(key | RELEASE); rfound: ; } /* Check for pressed keys. */ for (i = 0; i < NKEYCODE; i++) { key = ud->keycode[i]; if (key == 0) continue; for (j = 0; j < NKEYCODE; j++) if (key == sc->sc_odata.keycode[j]) goto pfound; DPRINTFN(2,("ukbd_intr: press key=0x%02x\n", key)); ADDKEY(key | PRESS); pfound: ; } } sc->sc_odata = *ud; if (nkeys == 0) return; if (sc->sc_polling) { DPRINTFN(1,("ukbd_intr: pollchar = 0x%03x\n", ibuf[0])); memcpy(sc->sc_pollchars, ibuf, nkeys * sizeof(u_int16_t)); sc->sc_npollchar = nkeys; return; } #ifdef WSDISPLAY_COMPAT_RAWKBD if (sc->sc_rawkbd) { char cbuf[MAXKEYS * 2]; int c; int npress; for (npress = i = j = 0; i < nkeys; i++) { key = ibuf[i]; c = ukbd_trtab[key & CODEMASK]; if (c == NN) continue; if (c & 0x80) cbuf[j++] = 0xe0; cbuf[j] = c & 0x7f; if (key & RELEASE) cbuf[j] |= 0x80; else { /* remember pressed keys for autorepeat */ if (c & 0x80) sc->sc_rep[npress++] = 0xe0; sc->sc_rep[npress++] = c & 0x7f; } DPRINTFN(1,("ukbd_intr: raw = %s0x%02x\n", c & 0x80 ? "0xe0 " : "", cbuf[j])); j++; } s = spltty(); wskbd_rawinput(sc->sc_wskbddev, cbuf, j); splx(s); untimeout(ukbd_rawrepeat, sc); if (npress != 0) { sc->sc_nrep = npress; timeout(ukbd_rawrepeat, sc, hz * REP_DELAY1 / 1000); } return; } #endif s = spltty(); for (i = 0; i < nkeys; i++) { key = ibuf[i]; wskbd_input(sc->sc_wskbddev, key&RELEASE ? WSCONS_EVENT_KEY_UP : WSCONS_EVENT_KEY_DOWN, key&CODEMASK); } splx(s); } void ukbd_set_leds(v, leds) void *v; int leds; { struct ukbd_softc *sc = v; u_int8_t res; DPRINTF(("ukbd_set_leds: sc=%p leds=%d\n", sc, leds)); sc->sc_leds = leds; res = 0; if (leds & WSKBD_LED_SCROLL) res |= SCROLL_LOCK; if (leds & WSKBD_LED_NUM) res |= NUM_LOCK; if (leds & WSKBD_LED_CAPS) res |= CAPS_LOCK; res |= leds & 0xf8; usbd_set_report_async(sc->sc_iface, UHID_OUTPUT_REPORT, 0, &res, 1); } #ifdef WSDISPLAY_COMPAT_RAWKBD void ukbd_rawrepeat(v) void *v; { struct ukbd_softc *sc = v; int s; s = spltty(); wskbd_rawinput(sc->sc_wskbddev, sc->sc_rep, sc->sc_nrep); splx(s); timeout(ukbd_rawrepeat, sc, hz * REP_DELAYN / 1000); } #endif int ukbd_ioctl(v, cmd, data, flag, p) void *v; u_long cmd; caddr_t data; int flag; struct proc *p; { struct ukbd_softc *sc = v; switch (cmd) { case WSKBDIO_GTYPE: *(int *)data = WSKBD_TYPE_USB; return (0); case WSKBDIO_SETLEDS: ukbd_set_leds(v, *(int *)data); return (0); case WSKBDIO_GETLEDS: *(int *)data = sc->sc_leds; return (0); #ifdef WSDISPLAY_COMPAT_RAWKBD case WSKBDIO_SETMODE: DPRINTF(("ukbd_ioctl: set raw = %d\n", *(int *)data)); sc->sc_rawkbd = *(int *)data == WSKBD_RAW; untimeout(ukbd_rawrepeat, sc); return (0); #endif } return (-1); } /* Console interface. */ void ukbd_cngetc(v, type, data) void *v; u_int *type; int *data; { struct ukbd_softc *sc = v; int s; int c; DPRINTFN(-1,("ukbd_cngetc: enter\n")); s = splusb(); sc->sc_polling = 1; while(sc->sc_npollchar <= 0) usbd_dopoll(sc->sc_iface); sc->sc_polling = 0; c = sc->sc_pollchars[0]; sc->sc_npollchar--; memcpy(sc->sc_pollchars, sc->sc_pollchars+1, sc->sc_npollchar * sizeof(u_int16_t)); *type = c & RELEASE ? WSCONS_EVENT_KEY_UP : WSCONS_EVENT_KEY_DOWN; *data = c & CODEMASK; splx(s); DPRINTFN(-1,("ukbd_cngetc: return 0x%02x\n", c)); } void ukbd_cnpollc(v, on) void *v; int on; { struct ukbd_softc *sc = v; DPRINTFN(2,("ukbd_cnpollc: sc=%p on=%d\n", v, on)); usbd_set_polling(sc->sc_iface, on); } int ukbd_cnattach() { /* * XXX USB requires too many parts of the kernel to be running * XXX in order to work, so we can't do much for the console * XXX keyboard until autconfiguration has run its course. */ ukbd_is_console = 1; return (0); }