#	$NetBSD: files.isa,v 1.13 1996/03/17 00:53:12 thorpej Exp $
#
# Config.new file and device description for machine-independent ISA code.
# Included by ports that need it.  Requires that the SCSI files be
# defined first.

# ports should specify appropriate major numbers for the following
# devices:
#	mcd, scd, wd, wt

device	isa {[port = -1], [size = 0],
	     [iomem = -1], [iosiz = 0],
	     [irq = -1], [drq = -1]}
attach	isa at isabus
file	dev/isa/isa.c			isa needs-flag

# ISA DMA controller
define	isadma
file	dev/isa/isadma.c		isadma needs-flag

#
# 8250/16[45]50-based multi-port serial boards
#

define	commulti {[slave = -1]}

# AST 4-port board
device	ast: commulti
attach	ast at isa
file	dev/isa/ast.c			ast

# BOCA 8-port board
device	boca: commulti
attach	boca at isa
file	dev/isa/boca.c			boca

# IBM RT PC 4-port board
device	rtfps: commulti
attach	rtfps at isa
file	dev/isa/rtfps.c			rtfps

#
# Serial and parallel drivers
#

# 8250/16[45]50-based "com" ports
device	com: tty
attach	com at isa with com_isa
attach	com at commulti with com_multi
file	dev/isa/com.c			com com_multi needs-flag

# Cyclades Cyclom multiport serial cards
# XXX currently broken
device	cy: tty
attach	cy at isa
file	dev/isa/cy.c			cy needs-count

# PC parallel ports (XXX what chip?)
device	lpt
attach	lpt at isa
file	dev/isa/lpt.c			lpt needs-flag

#
# SCSI host adapters
#

# Adaptec AHA-154x family
device	aha: scsi, isadma
attach	aha at isa
file	dev/isa/aha1542.c		aha

# Adapctec AIC-6[32]60 ICs
device	aic: scsi, isadma
attach	aic at isa
file	dev/isa/aic6360.c		aic

# Adaptec 7770-based EISA, VLB, etc. controllers
device	ahe: scsi, aic7xxx
attach	ahe at isa
file	dev/isa/aha284x.c		ahe

# BusLogic BT-74x EISA family (XXX; should be EISA.  it's special)
device	bt: scsi, isadma
attach	bt at isa
file	dev/isa/bt742a.c		bt

# Seagate ST0[12] ICs
device	sea: scsi, isadma
attach	sea at isa
file	dev/isa/seagate.c		sea

# UltraStor UHA-[13]4f boards
device	uha: scsi, isadma
attach	uha at isa
file	dev/isa/ultra14f.c		uha

# Western Digital WD7000 boards (XXX incomplete description)
# XXX not yet working
device	wds: scsi, isadma
attach	wds at isa
file	dev/isa/wd7000.c		wds

#
# Other ISA disk controllers
#

# Mitsumi CD-ROM controllers
device	mcd: disk
attach	mcd at isa
file	dev/isa/mcd.c			mcd needs-flag

# Sony CDU-3[13]A CD-ROM drives
device	scd: disk
attach	scd at isa
file	dev/isa/scd.c			scd needs-flag

# ISA "wd" (ESDI/IDE/etc.) controllers
device	wdc {drive = -1}
attach	wdc at isa
device	wd: disk, isadma
attach	wd at wdc
file	dev/isa/wd.c			wdc needs-flag

# Wangtek- and Archive-compatible tape controller boards
device	wt: tape, isadma
attach	wt at isa
file	dev/isa/wt.c			wt needs-flag

#
# ISA networking drivers
#

# 3Com common probe code
define	elink
file	dev/isa/elink.c			elink

# National Semiconductor DS8390/WD83C690-based boards
# (WD/SMC 80x3 family, SMC Ultra [8216], 3Com 3C503, NE[12]000, and clones)
device	ed: ether, ifnet
attach	ed at isa
file	dev/isa/if_ed.c			ed

# 3Com 3C505
device	eg: ether, ifnet
attach	eg at isa
file	dev/isa/if_eg.c			eg

# 3Com 3C501
device	el: ether, ifnet
attach	el at isa
file	dev/isa/if_el.c			el

# 3Com 3C5x9, 3c59x (EtherLink III) family
device	ep: ether, ifnet, elink
attach	ep at isa with ep_isa
attach	ep at pci with ep_pci
file	dev/isa/if_ep.c			ep

# Fujitsu MB8696[05]-based boards
# (Allied Telesis AT1700)
device	fe: ether, ifnet
attach	fe at isa
file	dev/isa/if_fe.c			fe

# HP Lan Ethernet controllers
# XXX currently broken
#device hp: ether, ifnet
#attach	hp at isa
#file	dev/isa/if_hp.c			hp

# Intel i82586-based boards
# (AT&T StarLAN 10, AT&T EN100, AT&T StarLAN Fiber, 3Com 3C507)
device	ie: ether, ifnet, elink
attach	ie at isa
file	dev/isa/if_ie.c			ie

# XXX ???
# XXX NOT IN TREE?
#device	ix: ether, ifnet
#attach	ix at isa
#file	dev/isa/if_ix.c			ix

# AMD am7990 (Lance) -based boards
# (BICC Isolan, NE2100, DEPCA)
# XXX conflicts with alpha if_le.c
#device	le: ether, ifnet, isadma
#attach	le at isa with le_isa
#file	dev/isa/if_le.c			le

#
# ISA Sound hardware
#

# the SoundBlaster DSP, or close likenesses; used by other drivers
define	sbdsp
file	dev/isa/sbdsp.c			sbdsp

# SoundBlaster family
device	sb: audio, isadma, sbdsp, mulaw
attach	sb at isa
file	dev/isa/sb.c			sb needs-flag

# ProAudio Spectrum
device	pas: audio, isadma, sbdsp, mulaw
attach	pas at isa
file	dev/isa/pas.c			pas needs-flag

# AD1848 (CS4248, CS4231, AD1845) audio codec support; used by other drivers
define	ad1848
file	dev/isa/ad1848.c		ad1848

# ICS2101 mixer chip support; used by other drivers
define	ics2101
file	dev/isa/ics2101.c		ics2101


# Audio systems based on Echo Speech Corp. ESC61[45] ASICs
device	pss {[port = -1], [size = 0],
	     [iomem = -1], [iosiz = 0],
	     [irq = -1], [drq = -1]}
attach	pss at isa
device	sp: audio, isadma, ad1848
attach	sp at pss
file	dev/isa/pss.c			pss needs-flag

# Microsoft Windows Sound System
device	wss: audio, isadma, ad1848
attach	wss at isa
file	dev/isa/wss.c			wss needs-flag

# Gravis UltraSound & UltraSound MAX.
# Use the "flags" keyword in a config file to specify an extra DMA
# channel for full-duplex operation. 
device	gus: audio, isadma, ics2101, ad1848, mulaw
attach	gus at isa
file	dev/isa/gus.c			gus needs-flag