/*	$NetBSD: intrdefs.h,v 1.9 2007/08/29 23:38:05 ad Exp $	*/

#ifndef _X86_INTRDEFS_H_
#define _X86_INTRDEFS_H_

/*
 * Interrupt priority levels.
 * 
 * There are tty, network and disk drivers that use free() at interrupt
 * time, so imp > (tty | net | bio).
 *
 * Since run queues may be manipulated by both the statclock and tty,
 * network, and disk drivers, clock > imp.
 *
 * IPL_HIGH must block everything that can manipulate a run queue.
 *
 * We need serial drivers to run at the absolute highest priority to
 * avoid overruns, so serial > high.
 *
 * The level numbers are picked to fit into APIC vector priorities.
 *
 */
#define	IPL_NONE	0x0	/* nothing */
#define	IPL_SOFTCLOCK	0x1	/* timeouts */
#define	IPL_SOFTBIO	0x2	/* block I/O */
#define	IPL_SOFTNET	0x3	/* protocol stacks */
#define	IPL_SOFTSERIAL	0x4	/* serial */
#define	IPL_BIO		0x5	/* block I/O */
#define	IPL_NET		0x5	/* network */
#define	IPL_TTY		0x5	/* terminal */
#define	IPL_LPT		0x5
#define	IPL_VM		0x5	/* memory allocation */
#define	IPL_AUDIO	0x5	/* audio */
#define	IPL_CLOCK	0x6	/* clock */
#define	IPL_STATCLOCK	0x6
#define IPL_SCHED	0x6
#define	IPL_HIGH	0x7	/* everything */
#define	IPL_SERIAL	0x7	/* serial */
#define IPL_IPI		0x7	/* inter-processor interrupts */
#define	NIPL		8

/* Interrupt sharing types. */
#define	IST_NONE	0	/* none */
#define	IST_PULSE	1	/* pulsed */
#define	IST_EDGE	2	/* edge-triggered */
#define	IST_LEVEL	3	/* level-triggered */

/*
 * Local APIC masks and software interrupt masks, in order
 * of priority.  Must not conflict with SIR_* below.
 */
#define LIR_IPI		31
#define LIR_TIMER	30

/*
 * XXX These should be lowest numbered, but right now would
 * conflict with the legacy IRQs.  Their current position
 * means that soft interrupt take priority over hardware
 * interrupts when lowering the priority level!
 */
#define	SIR_SERIAL	29
#define	SIR_NET		28
#define	SIR_BIO		27
#define	SIR_CLOCK	26

/*
 * Maximum # of interrupt sources per CPU. 32 to fit in one word.
 * ioapics can theoretically produce more, but it's not likely to
 * happen. For multiple ioapics, things can be routed to different
 * CPUs.
 */
#define MAX_INTR_SOURCES	32
#define NUM_LEGACY_IRQS		16

/*
 * Low and high boundaries between which interrupt gates will
 * be allocated in the IDT.
 */
#define IDT_INTR_LOW	(0x20 + NUM_LEGACY_IRQS)
#define IDT_INTR_HIGH	0xef

#define X86_IPI_HALT			0x00000001
#define X86_IPI_MICROSET		0x00000002
#define X86_IPI_FLUSH_FPU		0x00000004
#define X86_IPI_SYNCH_FPU		0x00000008
#define X86_IPI_MTRR			0x00000010
#define X86_IPI_GDT			0x00000020
#define X86_IPI_WRITE_MSR		0x00000040

#define X86_NIPI		7

#define X86_IPI_NAMES { "halt IPI", "timeset IPI", "FPU flush IPI", \
			 "FPU synch IPI", "MTRR update IPI", \
			 "GDT update IPI", "MSR write IPI" }

#define IREENT_MAGIC	0x18041969

#endif /* _X86_INTRDEFS_H_ */