/* * Copyright (c) 2003 Apple Computer, Inc. All rights reserved. * * @APPLE_OSREFERENCE_LICENSE_HEADER_START@ * * This file contains Original Code and/or Modifications of Original Code * as defined in and that are subject to the Apple Public Source License * Version 2.0 (the 'License'). You may not use this file except in * compliance with the License. The rights granted to you under the License * may not be used to create, or enable the creation or redistribution of, * unlawful or unlicensed copies of an Apple operating system, or to * circumvent, violate, or enable the circumvention or violation of, any * terms of an Apple operating system software license agreement. * * Please obtain a copy of the License at * http://www.opensource.apple.com/apsl/ and read it before using this file. * * The Original Code and all software distributed under the License are * distributed on an 'AS IS' basis, WITHOUT WARRANTY OF ANY KIND, EITHER * EXPRESS OR IMPLIED, AND APPLE HEREBY DISCLAIMS ALL SUCH WARRANTIES, * INCLUDING WITHOUT LIMITATION, ANY WARRANTIES OF MERCHANTABILITY, * FITNESS FOR A PARTICULAR PURPOSE, QUIET ENJOYMENT OR NON-INFRINGEMENT. * Please see the License for the specific language governing rights and * limitations under the License. * * @APPLE_OSREFERENCE_LICENSE_HEADER_END@ */ /* ======================================= * BCOPY, MEMCPY, and MEMMOVE for Mac OS X * ======================================= * * Version of 2/20/2003, tuned for G3. * * Register usage. Note we use R2, so this code will not run in a PEF/CFM * environment. * * r0 = "w7" or temp * r2 = "w8" * r3 = not used, as memcpy and memmove return 1st parameter as a value * r4 = source ptr ("rs") * r5 = count of bytes to move ("rc") * r6 = "w1" * r7 = "w2" * r8 = "w3" * r9 = "w4" * r10 = "w5" * r11 = "w6" * r12 = destination ptr ("rd") * f0-f3 = used for moving 8-byte aligned data */ #define rs r4 // NB: we depend on rs==r4 in "lswx" instructions #define rd r12 #define rc r5 #define w1 r6 #define w2 r7 #define w3 r8 #define w4 r9 #define w5 r10 #define w6 r11 #define w7 r0 #define w8 r2 #include #include #include #include .text #define kLong 33 // too long for string ops // Main entry points. .align 5 bcopy_g3: // void bcopy(const void *src, void *dst, size_t len) cmplwi rc,kLong // length > 32 bytes? sub w1,r4,r3 // must move in reverse if (rd-rs) 32 bytes? sub w1,r3,rs // must move in reverse if (rd-rs)=1) rlwinm rc,rc,0,0x1F // mask down to leftover bytes mtctr r0 // set up loop count beq 1f // dest already word aligned // Word align the destination. mtxer w4 // byte count to xer cmpwi r0,0 // any chunks to xfer? lswx w1,0,rs // move w4 bytes to align dest add rs,rs,w4 stswx w1,0,rd add rd,rd,w4 beq- 2f // pathologic case, no chunks to xfer // Forward, unaligned loop. 1: lwz w1,0(rs) lwz w2,4(rs) lwz w3,8(rs) lwz w4,12(rs) lwz w5,16(rs) lwz w6,20(rs) lwz w7,24(rs) lwz w8,28(rs) addi rs,rs,32 stw w1,0(rd) stw w2,4(rd) stw w3,8(rd) stw w4,12(rd) stw w5,16(rd) stw w6,20(rd) stw w7,24(rd) stw w8,28(rd) addi rd,rd,32 bdnz 1b 2: // rc = remaining bytes (0-31) mtxer rc // set up count for string ops mr r0,rd // move dest ptr out of the way lswx r5,0,rs // load xer bytes into r5-r12 (rs==r4) stswx r5,0,r0 // store them blr // Forward, aligned loop. We use FPRs. LLongFloat: andi. w4,w2,7 // W4 <- #bytes to doubleword-align destination sub rc,rc,w4 // adjust count for alignment srwi r0,rc,5 // number of 32-byte chunks to xfer rlwinm rc,rc,0,0x1F // mask down to leftover bytes mtctr r0 // set up loop count beq 1f // dest already doubleword aligned // Doubleword align the destination. mtxer w4 // byte count to xer cmpwi r0,0 // any chunks to xfer? lswx w1,0,rs // move w4 bytes to align dest add rs,rs,w4 stswx w1,0,rd add rd,rd,w4 beq- 2f // pathologic case, no chunks to xfer 1: // loop over 32-byte chunks lfd f0,0(rs) lfd f1,8(rs) lfd f2,16(rs) lfd f3,24(rs) addi rs,rs,32 stfd f0,0(rd) stfd f1,8(rd) stfd f2,16(rd) stfd f3,24(rd) addi rd,rd,32 bdnz 1b 2: // rc = remaining bytes (0-31) mtxer rc // set up count for string ops mr r0,rd // move dest ptr out of the way lswx r5,0,rs // load xer bytes into r5-r12 (rs==r4) stswx r5,0,r0 // store them blr // Long, reverse moves. // cr5 = beq if relatively word aligned LLongReverse: add rd,rd,rc // point to end of operands + 1 add rs,rs,rc beq cr5,LReverseFloat // aligned operands so can use FPRs srwi r0,rc,5 // get chunk count rlwinm rc,rc,0,0x1F // mask down to leftover bytes mtctr r0 // set up loop count mtxer rc // set up for trailing bytes 1: lwz w1,-4(rs) lwz w2,-8(rs) lwz w3,-12(rs) lwz w4,-16(rs) stw w1,-4(rd) lwz w5,-20(rs) stw w2,-8(rd) lwz w6,-24(rs) stw w3,-12(rd) lwz w7,-28(rs) stw w4,-16(rd) lwzu w8,-32(rs) stw w5,-20(rd) stw w6,-24(rd) stw w7,-28(rd) stwu w8,-32(rd) bdnz 1b sub r4,rs,rc // point to 1st (leftmost) leftover byte (0..31) sub r0,rd,rc // move dest ptr out of way lswx r5,0,r4 // load xer bytes into r5-r12 stswx r5,0,r0 // store them blr // Long, reverse aligned moves. We use FPRs. LReverseFloat: andi. w4,rd,7 // W3 <- #bytes to doubleword-align destination sub rc,rc,w4 // adjust count for alignment srwi r0,rc,5 // number of 32-byte chunks to xfer rlwinm rc,rc,0,0x1F // mask down to leftover bytes mtctr r0 // set up loop count beq 1f // dest already doubleword aligned // Doubleword align the destination. mtxer w4 // byte count to xer cmpwi r0,0 // any chunks to xfer? sub rs,rs,w4 // point to 1st bytes to xfer sub rd,rd,w4 lswx w1,0,rs // move w3 bytes to align dest stswx w1,0,rd beq- 2f // pathologic case, no chunks to xfer 1: lfd f0,-8(rs) lfd f1,-16(rs) lfd f2,-24(rs) lfdu f3,-32(rs) stfd f0,-8(rd) stfd f1,-16(rd) stfd f2,-24(rd) stfdu f3,-32(rd) bdnz 1b 2: // rc = remaining bytes (0-31) mtxer rc // set up count for string ops sub r4,rs,rc // point to 1st (leftmost) leftover byte (0..31) sub r0,rd,rc // move dest ptr out of way lswx r5,0,r4 // load xer bytes into r5-r12 stswx r5,0,r0 // store them blr COMMPAGE_DESCRIPTOR(bcopy_g3,_COMM_PAGE_BCOPY,0,k64Bit+kHasAltivec,kCommPage32)