/*
 * Copyright (c) 2006 Apple Computer, Inc. All rights reserved.
 *
 * @APPLE_OSREFERENCE_LICENSE_HEADER_START@
 * 
 * This file contains Original Code and/or Modifications of Original Code
 * as defined in and that are subject to the Apple Public Source License
 * Version 2.0 (the 'License'). You may not use this file except in
 * compliance with the License. The rights granted to you under the License
 * may not be used to create, or enable the creation or redistribution of,
 * unlawful or unlicensed copies of an Apple operating system, or to
 * circumvent, violate, or enable the circumvention or violation of, any
 * terms of an Apple operating system software license agreement.
 * 
 * Please obtain a copy of the License at
 * http://www.opensource.apple.com/apsl/ and read it before using this file.
 * 
 * The Original Code and all software distributed under the License are
 * distributed on an 'AS IS' basis, WITHOUT WARRANTY OF ANY KIND, EITHER
 * EXPRESS OR IMPLIED, AND APPLE HEREBY DISCLAIMS ALL SUCH WARRANTIES,
 * INCLUDING WITHOUT LIMITATION, ANY WARRANTIES OF MERCHANTABILITY,
 * FITNESS FOR A PARTICULAR PURPOSE, QUIET ENJOYMENT OR NON-INFRINGEMENT.
 * Please see the License for the specific language governing rights and
 * limitations under the License.
 * 
 * @APPLE_OSREFERENCE_LICENSE_HEADER_END@
 */
        
#include <machine/cpu_capabilities.h>
#include <machine/commpage.h>

/*
 * The bcopy/memcpy loops, tuned for 64-bit Pentium-M class processors with 
 * Supplemental SSE3 and 64-byte cache lines.  This is the 64-bit version.
 *
 * The following #defines are tightly coupled to the u-architecture:
 */

#define kShort  80			// too short to bother with SSE (must be >=80)
#define kVeryLong   (500*1024)          // large enough for non-temporal stores (>=8192 and <2GB)
#define kFastUCode  ((16*1024)-15)	// cutoff for microcode fastpath for "rep/movsl"


// void bcopy(const void *src, void *dst, size_t len);
 
        .text
	.code64
        .align 5, 0x90
LZero:
Lbcopy_sse3x_64:				// void bcopy(const void *src, void *dst, size_t len)
	pushq	%rbp			// set up a frame for backtraces
	movq	%rsp,%rbp
	movq	%rsi,%rax		// copy dest ptr
	movq	%rdi,%rsi		// xchange source and dest ptrs
	movq	%rax,%rdi
        subq    %rsi,%rax               // (dest - source)
        cmpq    %rdx,%rax               // must move in reverse if (dest - source) < length
        jb      LReverseIsland
        cmpq    $(kShort),%rdx          // long enough to bother with SSE?
        jbe     LShort			// no
	jmp	LNotShort

//
// void *memcpy(void *dst, const void *src, size_t len);
// void *memmove(void *dst, const void *src, size_t len);
//
// NB: These need to be 32 bytes from bcopy():
//

        .align	5, 0x90
Lmemcpy:				// void *memcpy(void *dst, const void *src, size_t len)
Lmemmove:				// void *memmove(void *dst, const void *src, size_t len)
	pushq	%rbp			// set up a frame for backtraces
	movq	%rsp,%rbp
	movq	%rdi,%r11		// save return value here        
        movq    %rdi,%rax
        subq    %rsi,%rax               // (dest - source)
        cmpq    %rdx,%rax               // must move in reverse if (dest - source) < length
        jb      LReverseIsland
        cmpq    $(kShort),%rdx          // long enough to bother with SSE?
        ja      LNotShort               // yes
        
// Handle short forward copies.  As the most common case, this is the fall-through path.
//      rdx = length (<= kShort)
//      rsi = source ptr
//      rdi = dest ptr

LShort:
	movl    %edx,%ecx		// copy length using 32-bit operation
	shrl	$2,%ecx			// get #doublewords
	jz	LLeftovers
2:					// loop copying doublewords
	movl	(%rsi),%eax
	addq	$4,%rsi
	movl	%eax,(%rdi)
	addq	$4,%rdi
	decl	%ecx
	jnz	2b
LLeftovers:				// handle leftover bytes (0..3) in last word
	andl	$3,%edx			// any leftover bytes?
	jz	5f
4:					// loop copying bytes
	movb	(%rsi),%al
	incq	%rsi
	movb	%al,(%rdi)
	incq	%rdi
	decl	%edx
	jnz	4b
5:
        movq	%r11,%rax		// get return value (dst ptr) for memcpy/memmove
	popq	%rbp
        ret


LReverseIsland:				// keep the "jb" above a short branch...
	jmp	LReverse		// ...because reverse moves are uncommon


// Handle forward moves that are long enough to justify use of SSE.
// First, 16-byte align the destination.
//      rdx = length (> kShort)
//      rsi = source ptr
//      rdi = dest ptr

LNotShort:
        cmpq    $(kVeryLong),%rdx       // long enough to justify heavyweight loops?
        jae     LVeryLong		// use very-long-operand path
        movl    %edi,%ecx               // copy low half of destination ptr
        negl    %ecx
        andl    $15,%ecx                // get #bytes to align destination
	jz	LDestAligned		// already aligned
        subl    %ecx,%edx               // decrement length
	rep				// align destination
	movsb

        
// Destination is now aligned.  Dispatch to one of sixteen loops over 64-byte chunks,
// based on the alignment of the source.  All vector loads and stores are aligned.
// Even though this means we have to shift and repack vectors, doing so is much faster
// than unaligned loads.  Since kShort>=80 and we've moved at most 15 bytes already,
// there is at least one chunk.  When we enter the copy loops, the following registers
// are set up:
//      rdx = residual length (0..63)
//	rcx = -(length to move), a multiple of 64 less than 2GB
//      rsi = ptr to 1st source byte not to move (unaligned)
//      rdi = ptr to 1st dest byte not to move (aligned)

LDestAligned:
        movq    %rdx,%rcx               // copy length
	movl	%esi,%eax		// copy low half of source address
        andl    $63,%edx                // get remaining bytes for LShort
	andl	$15,%eax		// mask to low 4 bits of source address
        andq    $-64,%rcx               // get number of bytes we will copy in inner loop
// We'd like to use lea with rip-relative addressing, but cannot in a .code64 block.
//	lea	LTable(%rip),%r8	// point to dispatch table
	movq	$(_COMM_PAGE_32_TO_64(_COMM_PAGE_BCOPY)),%r8 // work around 4586528
	addq	$(LTable-LZero),%r8	// work around 4586528
        addq    %rcx,%rsi               // point to 1st byte not copied
        addq    %rcx,%rdi
	movl	(%r8,%rax,4),%eax	// get offset of routine
        negq    %rcx                    // now generate offset to 1st byte to be copied
	addq	%r8,%rax		// generate address of copy loop
	jmp	*%rax			// enter copy loop, selected by source alignment

	.align	2
LTable:					// table of copy loop addresses
	.long	(LMod0 - LTable)
	.long	(LMod1 - LTable)
	.long	(LMod2 - LTable)
	.long	(LMod3 - LTable)
	.long	(LMod4 - LTable)
	.long	(LMod5 - LTable)
	.long	(LMod6 - LTable)
	.long	(LMod7 - LTable)
	.long	(LMod8 - LTable)
	.long	(LMod9 - LTable)
	.long	(LMod10 - LTable)
	.long	(LMod11 - LTable)
	.long	(LMod12 - LTable)
	.long	(LMod13 - LTable)
	.long	(LMod14 - LTable)
	.long	(LMod15 - LTable)


// Very long forward moves.  These are at least several pages.  They are special cased
// and aggressively optimized, not so much because they are common or useful, but
// because they are subject to benchmark.  There isn't enough room for them in the
// area reserved on the commpage for bcopy, so we put them elsewhere.  We call
// the longcopy routine using the normal ABI:
//      rdi = dest
//      rsi = source
//      rdx = length (>= kVeryLong bytes)

LVeryLong:
	pushq	%r11			// save return value
	movq	$_COMM_PAGE_32_TO_64(_COMM_PAGE_LONGCOPY),%rax
	call	*%rax			// call very long operand routine
	popq	%rax			// pop return value
	popq	%rbp
	ret	


// On Pentium-M, the microcode for "rep/movsl" is faster than SSE for 16-byte
// aligned operands from about 32KB up to kVeryLong for the hot cache case, and from
// about 256 bytes up to kVeryLong for cold caches.  This is because the microcode
// avoids having to read destination cache lines that will be completely overwritten.
// The cutoff we use (ie, kFastUCode) must somehow balance the two cases, since
// we do not know if the destination is in cache or not.

Lfastpath:
        addq    %rcx,%rsi               // restore ptrs to 1st byte of source and dest
        addq    %rcx,%rdi
	negl	%ecx			// make length positive (known to be < 2GB)
	orl	%edx,%ecx		// restore total #bytes remaining to move
	cld				// we'll move forward
	shrl	$2,%ecx			// compute #words to move
	rep				// the u-code will optimize this
	movsl
	jmp	LLeftovers		// handle 0..3 leftover bytes


// Forward loop for medium length operands in which low four bits of %rsi == 0000

LMod0:
	cmpl	$(-kFastUCode),%ecx	// %rcx == -length, where (length < kVeryLong)
	jle	Lfastpath		// long enough for fastpath in microcode
	jmp	1f
	.align	4,0x90			// 16-byte align inner loops
1:					// loop over 64-byte chunks
        movdqa  (%rsi,%rcx),%xmm0
        movdqa  16(%rsi,%rcx),%xmm1
        movdqa  32(%rsi,%rcx),%xmm2
        movdqa  48(%rsi,%rcx),%xmm3

        movdqa  %xmm0,(%rdi,%rcx)
        movdqa  %xmm1,16(%rdi,%rcx)
        movdqa  %xmm2,32(%rdi,%rcx)
        movdqa  %xmm3,48(%rdi,%rcx)
        
        addq    $64,%rcx
        jnz     1b
        
        jmp     LShort                  // copy remaining 0..63 bytes and done


// Forward loop for medium length operands in which low four bits of %rsi == 0001

LMod1:
	movdqa	-1(%rsi,%rcx),%xmm0	// prime the loop by loading 1st quadword
1:					// loop over 64-byte chunks
        movdqa  15(%rsi,%rcx),%xmm1
        movdqa  31(%rsi,%rcx),%xmm2
        movdqa  47(%rsi,%rcx),%xmm3
        movdqa  63(%rsi,%rcx),%xmm4
	
	movdqa	%xmm0,%xmm5
	movdqa	%xmm4,%xmm0

	palignr	$1,%xmm3,%xmm4		// dest <- shr( dest || source, imm*8 )
	palignr	$1,%xmm2,%xmm3
	palignr	$1,%xmm1,%xmm2
	palignr	$1,%xmm5,%xmm1
	
        movdqa  %xmm1,(%rdi,%rcx)
        movdqa  %xmm2,16(%rdi,%rcx)
        movdqa  %xmm3,32(%rdi,%rcx)
        movdqa  %xmm4,48(%rdi,%rcx)
        
        addq    $64,%rcx
        jnz     1b
        
        jmp     LShort                  // copy remaining 0..63 bytes and done


// Forward loop for medium length operands in which low four bits of %rsi == 0010

LMod2:
	movdqa	-2(%rsi,%rcx),%xmm0	// prime the loop by loading 1st source dq
1:					// loop over 64-byte chunks
        movdqa  14(%rsi,%rcx),%xmm1
        movdqa  30(%rsi,%rcx),%xmm2
        movdqa  46(%rsi,%rcx),%xmm3
        movdqa  62(%rsi,%rcx),%xmm4
	
	movdqa	%xmm0,%xmm5
	movdqa	%xmm4,%xmm0

	palignr	$2,%xmm3,%xmm4		// dest <- shr( dest || source, imm*8 )
	palignr	$2,%xmm2,%xmm3
	palignr	$2,%xmm1,%xmm2
	palignr	$2,%xmm5,%xmm1
	
        movdqa  %xmm1,(%rdi,%rcx)
        movdqa  %xmm2,16(%rdi,%rcx)
        movdqa  %xmm3,32(%rdi,%rcx)
        movdqa  %xmm4,48(%rdi,%rcx)
        
        addq    $64,%rcx
        jnz     1b
        
        jmp     LShort                  // copy remaining 0..63 bytes and done


// Forward loop for medium length operands in which low four bits of %rsi == 0011

LMod3:
	movdqa	-3(%rsi,%rcx),%xmm0	// prime the loop by loading 1st source dq
1:					// loop over 64-byte chunks
        movdqa  13(%rsi,%rcx),%xmm1
        movdqa  29(%rsi,%rcx),%xmm2
        movdqa  45(%rsi,%rcx),%xmm3
        movdqa  61(%rsi,%rcx),%xmm4
	
	movdqa	%xmm0,%xmm5
	movdqa	%xmm4,%xmm0

	palignr	$3,%xmm3,%xmm4		// dest <- shr( dest || source, imm*8 )
	palignr	$3,%xmm2,%xmm3
	palignr	$3,%xmm1,%xmm2
	palignr	$3,%xmm5,%xmm1
	
        movdqa  %xmm1,(%rdi,%rcx)
        movdqa  %xmm2,16(%rdi,%rcx)
        movdqa  %xmm3,32(%rdi,%rcx)
        movdqa  %xmm4,48(%rdi,%rcx)
        
        addq    $64,%rcx
        jnz     1b
        
        jmp     LShort                  // copy remaining 0..63 bytes and done
	
	
// Forward loop for medium length operands in which low four bits of %rsi == 0100
// We use the float single data type in order to use "movss" to merge vectors.

LMod4:
	movaps	-4(%rsi,%rcx),%xmm0	// 4-byte aligned: prime the loop
	jmp	1f
	.align	4,0x90
1:					// loop over 64-byte chunks
        movaps  12(%rsi,%rcx),%xmm1
        movaps  28(%rsi,%rcx),%xmm2
	movss	%xmm1,%xmm0		// copy low 4 bytes of source into destination
	pshufd	$(0x39),%xmm0,%xmm0	// rotate right 4 bytes (mask -- 00 11 10 01)
        movaps  44(%rsi,%rcx),%xmm3
	movss	%xmm2,%xmm1
	pshufd	$(0x39),%xmm1,%xmm1
	movaps	60(%rsi,%rcx),%xmm4
	movss	%xmm3,%xmm2
	pshufd	$(0x39),%xmm2,%xmm2

        movaps  %xmm0,(%rdi,%rcx)
	movss	%xmm4,%xmm3
	pshufd	$(0x39),%xmm3,%xmm3
        movaps  %xmm1,16(%rdi,%rcx)
        movaps  %xmm2,32(%rdi,%rcx)
	movaps	%xmm4,%xmm0
        movaps  %xmm3,48(%rdi,%rcx)
        
        addq    $64,%rcx
        jnz     1b
        
        jmp     LShort                  // copy remaining 0..63 bytes and done


// Forward loop for medium length operands in which low four bits of %rsi == 0101

LMod5:
	movdqa	-5(%rsi,%rcx),%xmm0	// prime the loop by loading 1st source dq
1:					// loop over 64-byte chunks
        movdqa  11(%rsi,%rcx),%xmm1
        movdqa  27(%rsi,%rcx),%xmm2
        movdqa  43(%rsi,%rcx),%xmm3
        movdqa  59(%rsi,%rcx),%xmm4
	
	movdqa	%xmm0,%xmm5
	movdqa	%xmm4,%xmm0

	palignr	$5,%xmm3,%xmm4		// dest <- shr( dest || source, imm*8 )
	palignr	$5,%xmm2,%xmm3
	palignr	$5,%xmm1,%xmm2
	palignr	$5,%xmm5,%xmm1
	
        movdqa  %xmm1,(%rdi,%rcx)
        movdqa  %xmm2,16(%rdi,%rcx)
        movdqa  %xmm3,32(%rdi,%rcx)
        movdqa  %xmm4,48(%rdi,%rcx)
        
        addq    $64,%rcx
        jnz     1b
        
        jmp     LShort                  // copy remaining 0..63 bytes and done


// Forward loop for medium length operands in which low four bits of %rsi == 0110

LMod6:
	movdqa	-6(%rsi,%rcx),%xmm0	// prime the loop by loading 1st source dq
1:					// loop over 64-byte chunks
        movdqa  10(%rsi,%rcx),%xmm1
        movdqa  26(%rsi,%rcx),%xmm2
        movdqa  42(%rsi,%rcx),%xmm3
        movdqa  58(%rsi,%rcx),%xmm4
	
	movdqa	%xmm0,%xmm5
	movdqa	%xmm4,%xmm0

	palignr	$6,%xmm3,%xmm4		// dest <- shr( dest || source, imm*8 )
	palignr	$6,%xmm2,%xmm3
	palignr	$6,%xmm1,%xmm2
	palignr	$6,%xmm5,%xmm1
	
        movdqa  %xmm1,(%rdi,%rcx)
        movdqa  %xmm2,16(%rdi,%rcx)
        movdqa  %xmm3,32(%rdi,%rcx)
        movdqa  %xmm4,48(%rdi,%rcx)
        
        addq    $64,%rcx
        jnz     1b
        
        jmp     LShort                  // copy remaining 0..63 bytes and done


// Forward loop for medium length operands in which low four bits of %rsi == 0111

LMod7:
	movdqa	-7(%rsi,%rcx),%xmm0	// prime the loop by loading 1st source dq
1:					// loop over 64-byte chunks
        movdqa  9(%rsi,%rcx),%xmm1
        movdqa  25(%rsi,%rcx),%xmm2
        movdqa  41(%rsi,%rcx),%xmm3
        movdqa  57(%rsi,%rcx),%xmm4
	
	movdqa	%xmm0,%xmm5
	movdqa	%xmm4,%xmm0

	palignr	$7,%xmm3,%xmm4		// dest <- shr( dest || source, imm*8 )
	palignr	$7,%xmm2,%xmm3
	palignr	$7,%xmm1,%xmm2
	palignr	$7,%xmm5,%xmm1
	
        movdqa  %xmm1,(%rdi,%rcx)
        movdqa  %xmm2,16(%rdi,%rcx)
        movdqa  %xmm3,32(%rdi,%rcx)
        movdqa  %xmm4,48(%rdi,%rcx)
        
        addq    $64,%rcx
        jnz     1b
        
        jmp     LShort                  // copy remaining 0..63 bytes and done
	
	
// Forward loop for medium length operands in which low four bits of %rsi == 1000
// We use the float double data type in order to use "shufpd" to shift by 8 bytes.

LMod8:
	cmpl	$(-kFastUCode),%ecx	// %rcx == -length, where (length < kVeryLong)
	jle	Lfastpath		// long enough for fastpath in microcode
	movapd	-8(%rsi,%rcx),%xmm0	// 8-byte aligned: prime the loop
	jmp	1f
	.align	4,0x90
1:					// loop over 64-byte chunks
        movapd  8(%rsi,%rcx),%xmm1
        movapd  24(%rsi,%rcx),%xmm2
	shufpd	$01,%xmm1,%xmm0		// %xmm0 <- shr( %xmm0 || %xmm1, 8 bytes)
        movapd  40(%rsi,%rcx),%xmm3
	shufpd	$01,%xmm2,%xmm1
	movapd	56(%rsi,%rcx),%xmm4
	shufpd	$01,%xmm3,%xmm2

        movapd  %xmm0,(%rdi,%rcx)
	shufpd	$01,%xmm4,%xmm3
        movapd  %xmm1,16(%rdi,%rcx)
        movapd  %xmm2,32(%rdi,%rcx)
	movapd	%xmm4,%xmm0
        movapd  %xmm3,48(%rdi,%rcx)
        
        addq    $64,%rcx
        jnz     1b
        
        jmp     LShort                  // copy remaining 0..63 bytes and done


// Forward loop for medium length operands in which low four bits of %rsi == 1001

LMod9:
	movdqa	-9(%rsi,%rcx),%xmm0	// prime the loop by loading 1st source dq
1:					// loop over 64-byte chunks
        movdqa  7(%rsi,%rcx),%xmm1
        movdqa  23(%rsi,%rcx),%xmm2
        movdqa  39(%rsi,%rcx),%xmm3
        movdqa  55(%rsi,%rcx),%xmm4
	
	movdqa	%xmm0,%xmm5
	movdqa	%xmm4,%xmm0

	palignr	$9,%xmm3,%xmm4		// dest <- shr( dest || source, imm*8 )
	palignr	$9,%xmm2,%xmm3
	palignr	$9,%xmm1,%xmm2
	palignr	$9,%xmm5,%xmm1
	
        movdqa  %xmm1,(%rdi,%rcx)
        movdqa  %xmm2,16(%rdi,%rcx)
        movdqa  %xmm3,32(%rdi,%rcx)
        movdqa  %xmm4,48(%rdi,%rcx)
        
        addq    $64,%rcx
        jnz     1b
        
        jmp     LShort                  // copy remaining 0..63 bytes and done


// Forward loop for medium length operands in which low four bits of %rsi == 1010

LMod10:
	movdqa	-10(%rsi,%rcx),%xmm0	// prime the loop by loading 1st source dq
1:					// loop over 64-byte chunks
        movdqa  6(%rsi,%rcx),%xmm1
        movdqa  22(%rsi,%rcx),%xmm2
        movdqa  38(%rsi,%rcx),%xmm3
        movdqa  54(%rsi,%rcx),%xmm4
	
	movdqa	%xmm0,%xmm5
	movdqa	%xmm4,%xmm0

	palignr	$10,%xmm3,%xmm4		// dest <- shr( dest || source, imm*8 )
	palignr	$10,%xmm2,%xmm3
	palignr	$10,%xmm1,%xmm2
	palignr	$10,%xmm5,%xmm1
	
        movdqa  %xmm1,(%rdi,%rcx)
        movdqa  %xmm2,16(%rdi,%rcx)
        movdqa  %xmm3,32(%rdi,%rcx)
        movdqa  %xmm4,48(%rdi,%rcx)
        
        addq    $64,%rcx
        jnz     1b
        
        jmp     LShort                  // copy remaining 0..63 bytes and done


// Forward loop for medium length operands in which low four bits of %rsi == 1011

LMod11:
	movdqa	-11(%rsi,%rcx),%xmm0	// prime the loop by loading 1st source dq
1:					// loop over 64-byte chunks
        movdqa  5(%rsi,%rcx),%xmm1
        movdqa  21(%rsi,%rcx),%xmm2
        movdqa  37(%rsi,%rcx),%xmm3
        movdqa  53(%rsi,%rcx),%xmm4
	
	movdqa	%xmm0,%xmm5
	movdqa	%xmm4,%xmm0

	palignr	$11,%xmm3,%xmm4		// dest <- shr( dest || source, imm*8 )
	palignr	$11,%xmm2,%xmm3
	palignr	$11,%xmm1,%xmm2
	palignr	$11,%xmm5,%xmm1
	
        movdqa  %xmm1,(%rdi,%rcx)
        movdqa  %xmm2,16(%rdi,%rcx)
        movdqa  %xmm3,32(%rdi,%rcx)
        movdqa  %xmm4,48(%rdi,%rcx)
        
        addq    $64,%rcx
        jnz     1b
        
        jmp     LShort                  // copy remaining 0..63 bytes and done
	

// Forward loop for medium length operands in which low four bits of %rsi == 1100
// We use the float single data type in order to use "movss" to merge vectors.

LMod12:
	movss	(%rsi,%rcx),%xmm0	// prefetch 1st four bytes of source, right justified
	jmp	1f
	.align	4,0x90
1:					// loop over 64-byte chunks
	pshufd	$(0x93),4(%rsi,%rcx),%xmm1 // load and rotate right 12 bytes (mask -- 10 01 00 11)
	pshufd	$(0x93),20(%rsi,%rcx),%xmm2
	pshufd	$(0x93),36(%rsi,%rcx),%xmm3
	pshufd	$(0x93),52(%rsi,%rcx),%xmm4
	
	movaps	%xmm4,%xmm5
	movss	%xmm3,%xmm4		// copy low 4 bytes of source into destination
	movss	%xmm2,%xmm3
	movss	%xmm1,%xmm2
	movss	%xmm0,%xmm1
	
        movaps  %xmm1,(%rdi,%rcx)
        movaps  %xmm2,16(%rdi,%rcx)
	movaps	%xmm5,%xmm0
        movaps  %xmm3,32(%rdi,%rcx)
        movaps  %xmm4,48(%rdi,%rcx)
        
        addq    $64,%rcx
        jnz     1b
        
        jmp     LShort                  // copy remaining 0..63 bytes and done


// Forward loop for medium length operands in which low four bits of %rsi == 1101

LMod13:
	movdqa	-13(%rsi,%rcx),%xmm0	// prime the loop by loading 1st source dq
1:					// loop over 64-byte chunks
        movdqa  3(%rsi,%rcx),%xmm1
        movdqa  19(%rsi,%rcx),%xmm2
        movdqa  35(%rsi,%rcx),%xmm3
        movdqa  51(%rsi,%rcx),%xmm4
	
	movdqa	%xmm0,%xmm5
	movdqa	%xmm4,%xmm0

	palignr	$13,%xmm3,%xmm4		// dest <- shr( dest || source, imm*8 )
	palignr	$13,%xmm2,%xmm3
	palignr	$13,%xmm1,%xmm2
	palignr	$13,%xmm5,%xmm1
	
        movdqa  %xmm1,(%rdi,%rcx)
        movdqa  %xmm2,16(%rdi,%rcx)
        movdqa  %xmm3,32(%rdi,%rcx)
        movdqa  %xmm4,48(%rdi,%rcx)
        
        addq    $64,%rcx
        jnz     1b
        
        jmp     LShort                  // copy remaining 0..63 bytes and done


// Forward loop for medium length operands in which low four bits of %rsi == 1110

LMod14:
	movdqa	-14(%rsi,%rcx),%xmm0	// prime the loop by loading 1st source dq
1:					// loop over 64-byte chunks
        movdqa  2(%rsi,%rcx),%xmm1
        movdqa  18(%rsi,%rcx),%xmm2
        movdqa  34(%rsi,%rcx),%xmm3
        movdqa  50(%rsi,%rcx),%xmm4
	
	movdqa	%xmm0,%xmm5
	movdqa	%xmm4,%xmm0

	palignr	$14,%xmm3,%xmm4		// dest <- shr( dest || source, imm*8 )
	palignr	$14,%xmm2,%xmm3
	palignr	$14,%xmm1,%xmm2
	palignr	$14,%xmm5,%xmm1
	
        movdqa  %xmm1,(%rdi,%rcx)
        movdqa  %xmm2,16(%rdi,%rcx)
        movdqa  %xmm3,32(%rdi,%rcx)
        movdqa  %xmm4,48(%rdi,%rcx)
        
        addq    $64,%rcx
        jnz     1b
        
        jmp     LShort                  // copy remaining 0..63 bytes and done


// Forward loop for medium length operands in which low four bits of %rsi == 1111

LMod15:
	movdqa	-15(%rsi,%rcx),%xmm0	// prime the loop by loading 1st source dq
1:					// loop over 64-byte chunks
        movdqa  1(%rsi,%rcx),%xmm1
        movdqa  17(%rsi,%rcx),%xmm2
        movdqa  33(%rsi,%rcx),%xmm3
        movdqa  49(%rsi,%rcx),%xmm4
	
	movdqa	%xmm0,%xmm5
	movdqa	%xmm4,%xmm0

	palignr	$15,%xmm3,%xmm4		// dest <- shr( dest || source, imm*8 )
	palignr	$15,%xmm2,%xmm3
	palignr	$15,%xmm1,%xmm2
	palignr	$15,%xmm5,%xmm1
	
        movdqa  %xmm1,(%rdi,%rcx)
        movdqa  %xmm2,16(%rdi,%rcx)
        movdqa  %xmm3,32(%rdi,%rcx)
        movdqa  %xmm4,48(%rdi,%rcx)
        
        addq    $64,%rcx
        jnz     1b
        
        jmp     LShort                  // copy remaining 0..63 bytes and done
	

// Reverse moves.  These are not optimized as aggressively as their forward
// counterparts, as they are only used with destructive overlap.
//      rdx = length
//      rsi = source ptr
//      rdi = dest ptr

LReverse:
        addq    %rdx,%rsi               // point to end of strings
        addq    %rdx,%rdi
        cmpq    $(kShort),%rdx          // long enough to bother with SSE?
        ja      LReverseNotShort        // yes

// Handle reverse short copies.
//      edx = length (<= kShort)
//      rsi = one byte past end of source
//      rdi = one byte past end of dest

LReverseShort:
	movl    %edx,%ecx		// copy length
	shrl	$3,%ecx			// #quadwords
	jz	3f
1:
	subq	$8,%rsi
	movq	(%rsi),%rax
	subq	$8,%rdi
	movq	%rax,(%rdi)
	decl	%ecx
	jnz	1b
3:
	andl	$7,%edx			// bytes?
	jz	5f
4:
	decq	%rsi
	movb	(%rsi),%al
	decq	%rdi
	movb	%al,(%rdi)
	decl	%edx
	jnz	4b
5:
        movq	%r11,%rax		// get return value (dst ptr) for memcpy/memmove
	popq	%rbp
        ret

// Handle a reverse move long enough to justify using SSE.
//      rdx = length (> kShort)
//      rsi = one byte past end of source
//      rdi = one byte past end of dest

LReverseNotShort:
        movl    %edi,%ecx               // copy destination
        andl    $15,%ecx                // get #bytes to align destination
        je      LReverseDestAligned     // already aligned
        subq	%rcx,%rdx		// adjust length
1:					// loop copying 1..15 bytes
	decq	%rsi
	movb	(%rsi),%al
	decq	%rdi
	movb	%al,(%rdi)
	decl	%ecx
	jnz	1b
        
// Destination is now aligned.  Prepare for reverse loops.

LReverseDestAligned:
        movq    %rdx,%rcx               // copy length
        andl    $63,%edx                // get remaining bytes for LReverseShort
        andq    $-64,%rcx               // get number of bytes we will copy in inner loop
        subq    %rcx,%rsi               // point to endpoint of copy
        subq    %rcx,%rdi
	testl	$15,%esi		// is source aligned too?
        jnz     LReverseUnalignedLoop   // no

LReverseAlignedLoop:                    // loop over 64-byte chunks
        movdqa  -16(%rsi,%rcx),%xmm0
        movdqa  -32(%rsi,%rcx),%xmm1
        movdqa  -48(%rsi,%rcx),%xmm2
        movdqa  -64(%rsi,%rcx),%xmm3

        movdqa  %xmm0,-16(%rdi,%rcx)
        movdqa  %xmm1,-32(%rdi,%rcx)
        movdqa  %xmm2,-48(%rdi,%rcx)
        movdqa  %xmm3,-64(%rdi,%rcx)
        
        subq    $64,%rcx
        jne     LReverseAlignedLoop
        
        jmp     LReverseShort           // copy remaining 0..63 bytes and done

    
// Reverse, unaligned loop.  LDDQU==MOVDQU on these machines.
        
LReverseUnalignedLoop:                  // loop over 64-byte chunks
        movdqu  -16(%rsi,%rcx),%xmm0
        movdqu  -32(%rsi,%rcx),%xmm1
        movdqu  -48(%rsi,%rcx),%xmm2
        movdqu  -64(%rsi,%rcx),%xmm3
        
        movdqa  %xmm0,-16(%rdi,%rcx)
        movdqa  %xmm1,-32(%rdi,%rcx)
        movdqa  %xmm2,-48(%rdi,%rcx)
        movdqa  %xmm3,-64(%rdi,%rcx)
        
        subq    $64,%rcx
        jne     LReverseUnalignedLoop
        
        jmp     LReverseShort           // copy remaining 0..63 bytes and done


	COMMPAGE_DESCRIPTOR(bcopy_sse3x_64,_COMM_PAGE_BCOPY,kHasSSE2+kHasSupplementalSSE3+kCache64,kHasSSE4_2)