/* vi:set ts=8 sts=4 sw=4: * * VIM - Vi IMproved by Bram Moolenaar * * Do ":help uganda" in Vim to read copying and usage conditions. * Do ":help credits" in Vim to see a list of people who contributed. */ /* * feature.h: Defines for optional code and preferences * * Edit this file to include/exclude parts of Vim, before compiling. * The only other file that may be edited is Makefile, it contains machine * specific options. * * To include specific options, change the "#if*" and "#endif" into comments, * or uncomment the "#define". * To exclude specific options, change the "#define" into a comment. */ /* * When adding a new feature: * - Add a #define below. * - Add a message in the table above ex_version(). * - Add a string to f_has(). * - Add a feature to ":help feature-list" in doc/eval.txt. * - Add feature to ":help +feature-list" in doc/various.txt. * - Add comment for the documentation of commands that use the feature. */ /* * Basic choices: * ============== * * +tiny almost no features enabled, not even multiple windows * +small few features enabled, as basic as possible * +normal A default selection of features enabled * +big many features enabled, as rich as possible. * +huge all possible features enabled. * * When +small is used, +tiny is also included. +normal implies +small, etc. */ /* * Uncomment one of these to override the default. For unix use a configure * argument, see Makefile. */ #if !defined(FEAT_TINY) && !defined(FEAT_SMALL) && !defined(FEAT_NORMAL) \ && !defined(FEAT_BIG) && !defined(FEAT_HUGE) /* #define FEAT_TINY */ /* #define FEAT_SMALL */ /* #define FEAT_NORMAL */ /* #define FEAT_BIG */ /* #define FEAT_HUGE */ #endif /* * These executables are made available with the +big feature, because they * are supposed to have enough RAM: Win32 (console & GUI), dos32, OS/2 and VMS. * The dos16 version has very little RAM available, use +small. */ #if !defined(FEAT_TINY) && !defined(FEAT_SMALL) && !defined(FEAT_NORMAL) \ && !defined(FEAT_BIG) && !defined(FEAT_HUGE) # if defined(MSWIN) || defined(DJGPP) || defined(OS2) || defined(VMS) || defined(MACOS) || defined(AMIGA) # define FEAT_BIG # else # ifdef MSDOS # define FEAT_SMALL # else # define FEAT_NORMAL # endif # endif #endif /* * Each feature implies including the "smaller" ones. */ #ifdef FEAT_HUGE # define FEAT_BIG #endif #ifdef FEAT_BIG # define FEAT_NORMAL #endif #ifdef FEAT_NORMAL # define FEAT_SMALL #endif #ifdef FEAT_SMALL # define FEAT_TINY #endif /* * Optional code (see ":help +feature-list") * ============= */ /* * +windows Multiple windows. Without this there is no help * window and no status lines. */ #ifdef FEAT_SMALL # define FEAT_WINDOWS #endif /* * +listcmds Vim commands for the buffer list and the argument * list. Without this there is no ":buffer" ":bnext", * ":bdel", ":argdelete", etc. */ #ifdef FEAT_NORMAL # define FEAT_LISTCMDS #endif /* * +vertsplit Vertically split windows. */ #ifdef FEAT_NORMAL # define FEAT_VERTSPLIT #endif #if defined(FEAT_VERTSPLIT) && !defined(FEAT_WINDOWS) # define FEAT_WINDOWS #endif /* * +cmdhist Command line history. */ #ifdef FEAT_SMALL # define FEAT_CMDHIST #endif /* * Message history is fixed at 200 message, 20 for the tiny version. */ #ifdef FEAT_SMALL # define MAX_MSG_HIST_LEN 200 #else # define MAX_MSG_HIST_LEN 20 #endif /* * +jumplist Jumplist, CTRL-O and CTRL-I commands. */ #ifdef FEAT_SMALL # define FEAT_JUMPLIST #endif /* the cmdline-window requires FEAT_VERTSPLIT and FEAT_CMDHIST */ #if defined(FEAT_VERTSPLIT) && defined(FEAT_CMDHIST) # define FEAT_CMDWIN #endif /* * +folding Fold lines. */ #ifdef FEAT_NORMAL # define FEAT_FOLDING #endif /* * +digraphs Digraphs. * In insert mode and on the command line you will be * able to use digraphs. The CTRL-K command will work. * Define OLD_DIGRAPHS to get digraphs compatible with * Vim 5.x. The new ones are from RFC 1345. */ #ifdef FEAT_NORMAL # define FEAT_DIGRAPHS /* #define OLD_DIGRAPHS */ #endif /* * +langmap 'langmap' option. Only useful when you put your * keyboard in a special language mode, e.g. for typing * greek. */ #ifdef FEAT_BIG # define FEAT_LANGMAP #endif /* * +keymap 'keymap' option. Allows you to map typed keys in * Insert mode for a special language. */ #ifdef FEAT_BIG # define FEAT_KEYMAP #endif /* * +localmap Mappings and abbreviations local to a buffer. */ #ifdef FEAT_NORMAL # define FEAT_LOCALMAP #endif /* * +insert_expand CTRL-N/CTRL-P/CTRL-X in insert mode. Takes about * 4Kbyte of code. */ #ifdef FEAT_NORMAL # define FEAT_INS_EXPAND #endif /* * +cmdline_compl completion of mappings/abbreviations in cmdline mode. * Takes a few Kbyte of code. */ #ifdef FEAT_NORMAL # define FEAT_CMDL_COMPL #endif #ifdef FEAT_NORMAL # define VIM_BACKTICK /* internal backtick expansion */ #endif /* * +visual Visual mode. * +visualextra Extra features for Visual mode (mostly block operators). */ #ifdef FEAT_SMALL # define FEAT_VISUAL # ifdef FEAT_NORMAL # define FEAT_VISUALEXTRA # endif #else # ifdef FEAT_CLIPBOARD # undef FEAT_CLIPBOARD /* can't use clipboard without Visual mode */ # endif #endif /* * +virtualedit 'virtualedit' option and its implementation */ #ifdef FEAT_NORMAL # define FEAT_VIRTUALEDIT #endif /* * +vreplace "gR" and "gr" commands. */ #ifdef FEAT_NORMAL # define FEAT_VREPLACE #endif /* * +cmdline_info 'showcmd' and 'ruler' options. */ #ifdef FEAT_NORMAL # define FEAT_CMDL_INFO #endif /* * +linebreak 'showbreak', 'breakat' and 'linebreak' options. * Also 'numberwidth'. */ #ifdef FEAT_NORMAL # define FEAT_LINEBREAK #endif /* * +ex_extra ":retab", ":right", ":left", ":center", ":normal". */ #ifdef FEAT_NORMAL # define FEAT_EX_EXTRA #endif /* * +extra_search 'hlsearch' and 'incsearch' options. */ #ifdef FEAT_NORMAL # define FEAT_SEARCH_EXTRA #endif /* * +quickfix Quickfix commands. */ #ifdef FEAT_NORMAL # define FEAT_QUICKFIX #endif /* * +file_in_path "gf" and "" commands. */ #ifdef FEAT_NORMAL # define FEAT_SEARCHPATH #endif /* * +find_in_path "[I" ":isearch" "^W^I", ":checkpath", etc. */ #ifdef FEAT_NORMAL # ifdef FEAT_SEARCHPATH /* FEAT_SEARCHPATH is required */ # define FEAT_FIND_ID # endif #endif /* * +path_extra up/downwards searching in 'path' and 'tags'. */ #ifdef FEAT_NORMAL # define FEAT_PATH_EXTRA #endif /* * +rightleft Right-to-left editing/typing support. * * Disabled for EBCDIC as it requires multibyte. */ #if defined(FEAT_BIG) && !defined(EBCDIC) # define FEAT_RIGHTLEFT #endif /* * +farsi Farsi (Persian language) Keymap support. * Requires FEAT_RIGHTLEFT. * * Disabled for EBCDIC as it requires multibyte. */ #if defined(FEAT_BIG) && !defined(EBCDIC) # define FEAT_FKMAP #endif #ifdef FEAT_FKMAP # ifndef FEAT_RIGHTLEFT # define FEAT_RIGHTLEFT # endif #endif /* * +arabic Arabic keymap and shaping support. * Requires FEAT_RIGHTLEFT and FEAT_MBYTE. * * Disabled for EBCDIC as it requires multibyte. */ #if defined(FEAT_BIG) && !defined(WIN16) && SIZEOF_INT >= 4 && !defined(EBCDIC) # define FEAT_ARABIC #endif #ifdef FEAT_ARABIC # ifndef FEAT_RIGHTLEFT # define FEAT_RIGHTLEFT # endif #endif /* * +emacs_tags When FEAT_EMACS_TAGS defined: Include support for * emacs style TAGS file. */ #ifdef FEAT_BIG # define FEAT_EMACS_TAGS #endif /* * +tag_binary Can use a binary search for the tags file. * * Disabled for EBCDIC: * On z/OS Unix we have the problem that /bin/sort sorts ASCII instead of * EBCDIC. With this binary search doesn't work, as VIM expects a tag file * sorted by character values. I'm not sure how to fix this. Should we really * do a EBCDIC to ASCII conversion for this?? */ #if defined(FEAT_NORMAL) && !defined(EBCDIC) # define FEAT_TAG_BINS #endif /* * +tag_old_static Old style static tags: "file:tag file ..". Slows * down tag searching a bit. */ #ifdef FEAT_NORMAL # define FEAT_TAG_OLDSTATIC #endif /* * +tag_any_white Allow any white space to separate the fields in a tags * file. When not defined, only a TAB is allowed. */ /* #define FEAT_TAG_ANYWHITE */ /* * +cscope Unix only: Cscope support. */ #if defined(UNIX) && defined(FEAT_BIG) && !defined(FEAT_CSCOPE) && !defined(MACOS_X) # define FEAT_CSCOPE #endif /* * +eval Built-in script language and expression evaluation, * ":let", ":if", etc. * +float Floating point variables. */ #ifdef FEAT_NORMAL # define FEAT_EVAL # if defined(HAVE_FLOAT_FUNCS) || defined(WIN3264) || defined(MACOS) # define FEAT_FLOAT # endif #endif /* * +profile Profiling for functions and scripts. */ #if defined(FEAT_HUGE) \ && defined(FEAT_EVAL) \ && ((defined(HAVE_GETTIMEOFDAY) && defined(HAVE_SYS_TIME_H)) \ || defined(WIN3264)) # define FEAT_PROFILE #endif /* * +reltime reltime() function */ #if defined(FEAT_NORMAL) \ && defined(FEAT_EVAL) \ && ((defined(HAVE_GETTIMEOFDAY) && defined(HAVE_SYS_TIME_H)) \ || defined(WIN3264)) # define FEAT_RELTIME #endif /* * +textobjects Text objects: "vaw", "das", etc. */ #if defined(FEAT_NORMAL) && defined(FEAT_EVAL) # define FEAT_TEXTOBJ #endif /* * Insert mode completion with 'completefunc'. */ #if defined(FEAT_INS_EXPAND) && defined(FEAT_EVAL) # define FEAT_COMPL_FUNC #endif /* * +user_commands Allow the user to define his own commands. */ #ifdef FEAT_NORMAL # define FEAT_USR_CMDS #endif /* * +printer ":hardcopy" command * +postscript Printing uses PostScript file output. */ #if defined(FEAT_NORMAL) && (defined(MSWIN) || defined(FEAT_EVAL)) \ && !defined(AMIGA) # define FEAT_PRINTER #endif #if defined(FEAT_PRINTER) && ((defined(MSWIN) && defined(MSWINPS)) \ || (!defined(MSWIN) && defined(FEAT_EVAL))) # define FEAT_POSTSCRIPT #endif /* * +modify_fname modifiers for file name. E.g., "%:p:h". */ #ifdef FEAT_NORMAL # define FEAT_MODIFY_FNAME #endif /* * +autocmd ":autocmd" command */ #ifdef FEAT_NORMAL # define FEAT_AUTOCMD #endif /* * +diff Displaying diffs in a nice way. * Requires +windows and +autocmd. */ #if defined(FEAT_NORMAL) && defined(FEAT_WINDOWS) && defined(FEAT_AUTOCMD) # define FEAT_DIFF #endif /* * +title 'title' and 'icon' options * +statusline 'statusline', 'rulerformat' and special format of * 'titlestring' and 'iconstring' options. * +byte_offset '%o' in 'statusline' and builtin functions line2byte() * and byte2line(). * Note: Required for Macintosh. */ #if defined(FEAT_NORMAL) && !defined(MSDOS) # define FEAT_TITLE #endif #ifdef FEAT_NORMAL # define FEAT_STL_OPT # ifndef FEAT_CMDL_INFO # define FEAT_CMDL_INFO /* 'ruler' is required for 'statusline' */ # endif #endif #ifdef FEAT_NORMAL # define FEAT_BYTEOFF #endif /* * +wildignore 'wildignore' and 'backupskip' options * Needed for Unix to make "crontab -e" work. */ #if defined(FEAT_NORMAL) || defined(UNIX) # define FEAT_WILDIGN #endif /* * +wildmenu 'wildmenu' option */ #if defined(FEAT_NORMAL) && defined(FEAT_WINDOWS) # define FEAT_WILDMENU #endif /* * +osfiletype filetype checking in autocommand patterns. * Only on systems that support filetypes (RISC OS). */ #if 0 # define FEAT_OSFILETYPE # define DFLT_OFT "Text" #endif /* * +viminfo reading/writing the viminfo file. Takes about 8Kbyte * of code. * VIMINFO_FILE Location of user .viminfo file (should start with $). * VIMINFO_FILE2 Location of alternate user .viminfo file. */ #ifdef FEAT_NORMAL # define FEAT_VIMINFO /* #define VIMINFO_FILE "$HOME/foo/.viminfo" */ /* #define VIMINFO_FILE2 "~/bar/.viminfo" */ #endif /* * +syntax syntax highlighting. When using this, it's a good * idea to have +autocmd and +eval too. */ #if defined(FEAT_NORMAL) || defined(PROTO) # define FEAT_SYN_HL #endif /* * +conceal 'conceal' option. Needs syntax highlighting * as this is how the concealed text is defined. */ #if defined(FEAT_BIG) && defined(FEAT_SYN_HL) # define FEAT_CONCEAL #endif /* * +spell spell checking * * Disabled for EBCDIC: * Doesn't work (SIGSEGV). */ #if (defined(FEAT_NORMAL) || defined(PROTO)) && !defined(EBCDIC) # define FEAT_SPELL #endif /* * +builtin_terms Choose one out of the following four: * * NO_BUILTIN_TCAPS Do not include any builtin termcap entries (used only * with HAVE_TGETENT defined). * * (nothing) Machine specific termcap entries will be included. * This is default for win16 to save static data. * * SOME_BUILTIN_TCAPS Include most useful builtin termcap entries (used only * with NO_BUILTIN_TCAPS not defined). * This is the default. * * ALL_BUILTIN_TCAPS Include all builtin termcap entries * (used only with NO_BUILTIN_TCAPS not defined). */ #ifdef HAVE_TGETENT /* #define NO_BUILTIN_TCAPS */ #endif #if !defined(NO_BUILTIN_TCAPS) && !defined(FEAT_GUI_W16) # ifdef FEAT_BIG # define ALL_BUILTIN_TCAPS # else # define SOME_BUILTIN_TCAPS /* default */ # endif #endif /* * +lispindent lisp indenting (From Eric Fischer). * +cindent C code indenting (From Eric Fischer). * +smartindent smart C code indenting when the 'si' option is set. * * These two need to be defined when making prototypes. */ #if defined(FEAT_NORMAL) || defined(PROTO) # define FEAT_LISP #endif #if defined(FEAT_NORMAL) || defined(PROTO) # define FEAT_CINDENT #endif #ifdef FEAT_NORMAL # define FEAT_SMARTINDENT #endif /* * +comments 'comments' option. */ #ifdef FEAT_NORMAL # define FEAT_COMMENTS #endif /* * +cryptv Encryption (by Mohsin Ahmed ). */ #if defined(FEAT_NORMAL) && !defined(FEAT_CRYPT) || defined(PROTO) # define FEAT_CRYPT #endif /* * +mksession ":mksession" command. * Requires +windows and +vertsplit. */ #if defined(FEAT_NORMAL) && defined(FEAT_WINDOWS) && defined(FEAT_VERTSPLIT) # define FEAT_SESSION #endif /* * +multi_lang Multi language support. ":menutrans", ":language", etc. * +gettext Message translations (requires +multi_lang) * (only when "lang" archive unpacked) */ #ifdef FEAT_NORMAL # define FEAT_MULTI_LANG #endif #if defined(HAVE_GETTEXT) && defined(FEAT_MULTI_LANG) \ && (defined(HAVE_LOCALE_H) || defined(X_LOCALE)) # define FEAT_GETTEXT #endif /* * +multi_byte Generic multi-byte character handling. Doesn't work * with 16 bit ints. Required for GTK+ 2. * * Disabled for EBCDIC: * Multibyte support doesn't work on z/OS Unix currently. */ #if (defined(FEAT_BIG) || defined(FEAT_GUI_GTK) || defined(FEAT_ARABIC)) \ && !defined(FEAT_MBYTE) && !defined(WIN16) \ && SIZEOF_INT >= 4 && !defined(EBCDIC) # define FEAT_MBYTE #endif /* Define this if you want to use 16 bit Unicode only, reduces memory used for * the screen structures. */ /* #define UNICODE16 */ /* * +multi_byte_ime Win32 IME input method. Requires +multi_byte. * Only for far-east Windows, so IME can be used to input * chars. Not tested much! */ #if defined(FEAT_GUI_W32) && !defined(FEAT_MBYTE_IME) /* #define FEAT_MBYTE_IME */ # endif #if defined(FEAT_MBYTE_IME) && !defined(FEAT_MBYTE) # define FEAT_MBYTE #endif #if defined(FEAT_MBYTE) && SIZEOF_INT < 4 && !defined(PROTO) Error: Can only handle multi-byte feature with 32 bit int or larger #endif /* Use iconv() when it's available. */ #if defined(FEAT_MBYTE) && ((defined(HAVE_ICONV_H) && defined(HAVE_ICONV)) \ || defined(DYNAMIC_ICONV)) # define USE_ICONV #endif /* * +xim X Input Method. For entering special languages like * chinese and Japanese. * +hangul_input Internal Hangul input method. Must be included * through configure: "--enable-hangulin" * Both are for Unix and VMS only. */ #ifndef FEAT_XIM /* #define FEAT_XIM */ #endif #if defined(FEAT_XIM) && defined(FEAT_GUI_GTK) # define USE_XIM 1 /* needed for GTK include files */ #endif #ifdef FEAT_HANGULIN # define HANGUL_DEFAULT_KEYBOARD 2 /* 2 or 3 bulsik keyboard */ # define ESC_CHG_TO_ENG_MODE /* if defined, when ESC pressed, * turn to english mode */ # if !defined(FEAT_XFONTSET) && defined(HAVE_X11) && !defined(FEAT_GUI_GTK) # define FEAT_XFONTSET /* Hangul input requires xfontset */ # endif # if defined(FEAT_XIM) && !defined(LINT) Error: You should select only ONE of XIM and HANGUL INPUT # endif #endif #if defined(FEAT_HANGULIN) || defined(FEAT_XIM) /* # define X_LOCALE */ /* for OS with incomplete locale support, like old linux versions. */ /* # define SLOW_XSERVER */ /* for extremely slow X server */ #endif /* * +xfontset X fontset support. For outputting wide characters. */ #ifndef FEAT_XFONTSET # if defined(FEAT_MBYTE) && defined(HAVE_X11) && !defined(FEAT_GUI_GTK) # define FEAT_XFONTSET # else /* # define FEAT_XFONTSET */ # endif #endif /* * +libcall libcall() function */ /* Using dlopen() also requires dlsym() to be available. */ #if defined(HAVE_DLOPEN) && defined(HAVE_DLSYM) # define USE_DLOPEN #endif #if defined(FEAT_EVAL) && (defined(WIN3264) || ((defined(UNIX) || defined(VMS)) \ && (defined(USE_DLOPEN) || defined(HAVE_SHL_LOAD)))) # define FEAT_LIBCALL #endif /* * +scrollbind synchronization of split windows */ #if defined(FEAT_NORMAL) && defined(FEAT_WINDOWS) # define FEAT_SCROLLBIND #endif /* * +cursorbind synchronization of split windows */ #if defined(FEAT_NORMAL) && defined(FEAT_WINDOWS) # define FEAT_CURSORBIND #endif /* * +menu ":menu" command */ #ifdef FEAT_NORMAL # define FEAT_MENU # ifdef FEAT_GUI_W32 # define FEAT_TEAROFF # endif #endif /* There are two ways to use XPM. */ #if (defined(HAVE_XM_XPMP_H) && defined(FEAT_GUI_MOTIF)) \ || defined(HAVE_X11_XPM_H) # define HAVE_XPM 1 #endif /* * +toolbar Include code for a toolbar (for the Win32 GUI, GTK * always has it). But only if menus are enabled. */ #if defined(FEAT_NORMAL) && defined(FEAT_MENU) \ && (defined(FEAT_GUI_GTK) \ || defined(FEAT_GUI_MSWIN) \ || ((defined(FEAT_GUI_MOTIF) || defined(FEAT_GUI_ATHENA)) \ && defined(HAVE_XPM)) \ || defined(FEAT_GUI_PHOTON)) # define FEAT_TOOLBAR #endif #if defined(FEAT_TOOLBAR) && !defined(FEAT_MENU) # define FEAT_MENU #endif /* * GUI tabline */ #if defined(FEAT_WINDOWS) && defined(FEAT_NORMAL) \ && (defined(FEAT_GUI_GTK) \ || (defined(FEAT_GUI_MOTIF) && defined(HAVE_XM_NOTEBOOK_H)) \ || defined(FEAT_GUI_MAC) \ || (defined(FEAT_GUI_MSWIN) && !defined(WIN16) \ && (!defined(_MSC_VER) || _MSC_VER > 1020))) # define FEAT_GUI_TABLINE #endif /* * +browse ":browse" command. * or just the ":browse" command modifier */ #if defined(FEAT_NORMAL) # define FEAT_BROWSE_CMD # if defined(FEAT_GUI_MSWIN) || defined(FEAT_GUI_MOTIF) || defined(FEAT_GUI_ATHENA) || defined(FEAT_GUI_GTK) || defined(FEAT_GUI_PHOTON) || defined(FEAT_GUI_MAC) # define FEAT_BROWSE # endif #endif /* * +dialog_gui Use GUI dialog. * +dialog_con May use Console dialog. * When none of these defined there is no dialog support. */ #ifdef FEAT_NORMAL # if ((defined(FEAT_GUI_ATHENA) || defined(FEAT_GUI_MOTIF)) \ && defined(HAVE_X11_XPM_H)) \ || defined(FEAT_GUI_GTK) \ || defined(FEAT_GUI_PHOTON) \ || defined(FEAT_GUI_MSWIN) \ || defined(FEAT_GUI_MAC) # define FEAT_CON_DIALOG # define FEAT_GUI_DIALOG # else # define FEAT_CON_DIALOG # endif #endif #if !defined(FEAT_GUI_DIALOG) && (defined(FEAT_GUI_MOTIF) \ || defined(FEAT_GUI_ATHENA) || defined(FEAT_GUI_GTK) \ || defined(FEAT_GUI_W32)) /* need a dialog to show error messages when starting from the desktop */ # define FEAT_GUI_DIALOG #endif #if defined(FEAT_GUI_DIALOG) && \ (defined(FEAT_GUI_MOTIF) || defined(FEAT_GUI_ATHENA) \ || defined(FEAT_GUI_GTK) || defined(FEAT_GUI_MSWIN) \ || defined(FEAT_GUI_PHOTON) || defined(FEAT_GUI_MAC)) # define FEAT_GUI_TEXTDIALOG #endif /* Mac specific thing: Codewarrior interface. */ #ifdef FEAT_GUI_MAC # define FEAT_CW_EDITOR #endif /* * Preferences: * ============ */ /* * +writebackup 'writebackup' is default on: * Use a backup file while overwriting a file. But it's * deleted again when 'backup' is not set. Changing this * is strongly discouraged: You can lose all your * changes when the computer crashes while writing the * file. * VMS note: It does work on VMS as well, but because of * version handling it does not have any purpose. * Overwrite will write to the new version. */ #ifndef VMS # define FEAT_WRITEBACKUP #endif /* * +xterm_save The t_ti and t_te entries for the builtin xterm will * be set to save the screen when starting Vim and * restoring it when exiting. */ /* #define FEAT_XTERM_SAVE */ /* * DEBUG Output a lot of debugging garbage. */ /* #define DEBUG */ /* * STARTUPTIME Time the startup process. Writes a file with * timestamps. */ #if defined(FEAT_NORMAL) \ && ((defined(HAVE_GETTIMEOFDAY) && defined(HAVE_SYS_TIME_H)) \ || defined(WIN3264)) # define STARTUPTIME 1 #endif /* * MEM_PROFILE Debugging of memory allocation and freeing. */ /* #define MEM_PROFILE */ /* * VIMRC_FILE Name of the .vimrc file in current dir. */ /* #define VIMRC_FILE ".vimrc" */ /* * EXRC_FILE Name of the .exrc file in current dir. */ /* #define EXRC_FILE ".exrc" */ /* * GVIMRC_FILE Name of the .gvimrc file in current dir. */ /* #define GVIMRC_FILE ".gvimrc" */ /* * SESSION_FILE Name of the default ":mksession" file. */ #define SESSION_FILE "Session.vim" /* * USR_VIMRC_FILE Name of the user .vimrc file. * USR_VIMRC_FILE2 Name of alternate user .vimrc file. * USR_VIMRC_FILE3 Name of alternate user .vimrc file. */ /* #define USR_VIMRC_FILE "~/foo/.vimrc" */ /* #define USR_VIMRC_FILE2 "~/bar/.vimrc" */ /* #define USR_VIMRC_FILE3 "$VIM/.vimrc" */ /* * EVIM_FILE Name of the evim.vim script file */ /* #define EVIM_FILE "$VIMRUNTIME/evim.vim" */ /* * USR_EXRC_FILE Name of the user .exrc file. * USR_EXRC_FILE2 Name of the alternate user .exrc file. */ /* #define USR_EXRC_FILE "~/foo/.exrc" */ /* #define USR_EXRC_FILE2 "~/bar/.exrc" */ /* * USR_GVIMRC_FILE Name of the user .gvimrc file. * USR_GVIMRC_FILE2 Name of the alternate user .gvimrc file. */ /* #define USR_GVIMRC_FILE "~/foo/.gvimrc" */ /* #define USR_GVIMRC_FILE2 "~/bar/.gvimrc" */ /* #define USR_GVIMRC_FILE3 "$VIM/.gvimrc" */ /* * SYS_VIMRC_FILE Name of the system-wide .vimrc file. */ /* #define SYS_VIMRC_FILE "/etc/vimrc" */ /* * SYS_GVIMRC_FILE Name of the system-wide .gvimrc file. */ /* #define SYS_GVIMRC_FILE "/etc/gvimrc" */ /* * DFLT_HELPFILE Name of the help file. */ /* # define DFLT_HELPFILE "$VIMRUNTIME/doc/help.txt.gz" */ /* * File names for: * FILETYPE_FILE switch on file type detection * FTPLUGIN_FILE switch on loading filetype plugin files * INDENT_FILE switch on loading indent files * FTOFF_FILE switch off file type detection * FTPLUGOF_FILE switch off loading settings files * INDOFF_FILE switch off loading indent files */ /* # define FILETYPE_FILE "filetype.vim" */ /* # define FTPLUGIN_FILE "ftplugin.vim" */ /* # define INDENT_FILE "indent.vim" */ /* # define FTOFF_FILE "ftoff.vim" */ /* # define FTPLUGOF_FILE "ftplugof.vim" */ /* # define INDOFF_FILE "indoff.vim" */ /* * SYS_MENU_FILE Name of the default menu.vim file. */ /* # define SYS_MENU_FILE "$VIMRUNTIME/menu.vim" */ /* * SYS_OPTWIN_FILE Name of the default optwin.vim file. */ #ifndef SYS_OPTWIN_FILE # define SYS_OPTWIN_FILE "$VIMRUNTIME/optwin.vim" #endif /* * SYNTAX_FNAME Name of a syntax file, where %s is the syntax name. */ /* #define SYNTAX_FNAME "/foo/%s.vim" */ /* * RUNTIME_DIRNAME Generic name for the directory of the runtime files. */ #ifndef RUNTIME_DIRNAME # define RUNTIME_DIRNAME "runtime" #endif /* * RUNTIME_GLOBAL Directory name for global Vim runtime directory. * Don't define this if the preprocessor can't handle * string concatenation. * Also set by "--with-global-runtime" configure argument. */ /* #define RUNTIME_GLOBAL "/etc/vim" */ /* * MODIFIED_BY Name of who modified Vim. Required when distributing * a modifed version of Vim. * Also from the "--with-modified-by" configure argument. */ /* #define MODIFIED_BY "John Doe" */ /* * Machine dependent: * ================== */ /* * +fork Unix only: fork() support (detected by configure) * +system Use system() instead of fork/exec for starting a * shell. Doesn't work for the GUI! */ /* #define USE_SYSTEM */ /* * +X11 Unix only. Include code for xterm title saving and X * clipboard. Only works if HAVE_X11 is also defined. */ #if (defined(FEAT_NORMAL) || defined(FEAT_GUI_MOTIF) || defined(FEAT_GUI_ATHENA)) # define WANT_X11 #endif /* * XSMP - X11 Session Management Protocol * It may be preferred to disable this if the GUI supports it (e.g., * GNOME/KDE) and implement save-yourself etc. through that, but it may also * be cleaner to have all SM-aware vims do the same thing (libSM does not * depend upon X11). * If your GUI wants to support SM itself, change this ifdef. * I'm assuming that any X11 implementation will cope with this for now. */ #if defined(HAVE_X11) && defined(WANT_X11) && defined(HAVE_X11_SM_SMLIB_H) # define USE_XSMP #endif #if defined(USE_XSMP_INTERACT) && !defined(USE_XSMP) # undef USE_XSMP_INTERACT #endif /* * +mouse_xterm Unix only: Include code for xterm mouse handling. * +mouse_dec idem, for Dec mouse handling. * +mouse_jsbterm idem, for Jsbterm mouse handling. * +mouse_netterm idem, for Netterm mouse handling. * (none) MS-DOS mouse support. * +mouse_gpm Unix only: Include code for Linux console mouse * handling. * +mouse_pterm PTerm mouse support for QNX * +mouse_sysmouse Unix only: Include code for FreeBSD and DragonFly * console mouse handling. * +mouse Any mouse support (any of the above enabled). */ /* OS/2 and Amiga console have no mouse support */ #if !defined(AMIGA) && !defined(OS2) # ifdef FEAT_NORMAL # define FEAT_MOUSE_XTERM # endif # ifdef FEAT_BIG # define FEAT_MOUSE_NET # endif # ifdef FEAT_BIG # define FEAT_MOUSE_DEC # endif # if defined(FEAT_NORMAL) && (defined(MSDOS) || defined(WIN3264)) # define DOS_MOUSE # endif # if defined(FEAT_NORMAL) && defined(__QNX__) # define FEAT_MOUSE_PTERM # endif #endif #if defined(FEAT_NORMAL) && defined(HAVE_GPM) # define FEAT_MOUSE_GPM #endif #if defined(FEAT_NORMAL) && defined(HAVE_SYSMOUSE) # define FEAT_SYSMOUSE #endif /* Define FEAT_MOUSE when any of the above is defined or FEAT_GUI. */ #if !defined(FEAT_MOUSE_TTY) \ && (defined(FEAT_MOUSE_XTERM) \ || defined(FEAT_MOUSE_NET) || defined(FEAT_MOUSE_DEC) \ || defined(DOS_MOUSE) || defined(FEAT_MOUSE_GPM) \ || defined(FEAT_MOUSE_JSB) || defined(FEAT_MOUSE_PTERM) \ || defined(FEAT_SYSMOUSE)) # define FEAT_MOUSE_TTY /* include non-GUI mouse support */ #endif #if !defined(FEAT_MOUSE) && (defined(FEAT_MOUSE_TTY) || defined(FEAT_GUI)) # define FEAT_MOUSE /* include generic mouse support */ #endif /* * +clipboard Clipboard support. Always used for the GUI. * +xterm_clipboard Unix only: Include code for handling the clipboard * in an xterm like in the GUI. */ #ifdef FEAT_GUI # ifndef FEAT_CLIPBOARD # define FEAT_CLIPBOARD # ifndef FEAT_VISUAL # define FEAT_VISUAL # endif # endif #endif #if defined(FEAT_NORMAL) && defined(FEAT_VISUAL) \ && (defined(UNIX) || defined(VMS)) \ && defined(WANT_X11) && defined(HAVE_X11) # define FEAT_XCLIPBOARD # ifndef FEAT_CLIPBOARD # define FEAT_CLIPBOARD # endif #endif /* * +dnd Drag'n'drop support. Always used for the GTK+ GUI. */ #if defined(FEAT_CLIPBOARD) && defined(FEAT_GUI_GTK) # define FEAT_DND #endif #if defined(FEAT_GUI_MSWIN) && defined(FEAT_SMALL) # define MSWIN_FIND_REPLACE /* include code for find/replace dialog */ # define MSWIN_FR_BUFSIZE 256 #endif #if defined(FEAT_GUI_GTK) || defined(FEAT_GUI_MOTIF) \ || defined(MSWIN_FIND_REPLACE) # define FIND_REPLACE_DIALOG 1 #endif /* * +clientserver Remote control via the remote_send() function * and the --remote argument */ #if (defined(WIN32) || defined(FEAT_XCLIPBOARD)) && defined(FEAT_EVAL) # define FEAT_CLIENTSERVER #endif /* * +termresponse send t_RV to obtain terminal response. Used for xterm * to check if mouse dragging can be used and if term * codes can be obtained. */ #if (defined(FEAT_NORMAL) || defined(FEAT_MOUSE)) && defined(HAVE_TGETENT) # define FEAT_TERMRESPONSE #endif /* * cursor shape Adjust the shape of the cursor to the mode. * mouse shape Adjust the shape of the mouse pointer to the mode. */ #ifdef FEAT_NORMAL /* MS-DOS console and Win32 console can change cursor shape */ # if defined(MSDOS) || (defined(WIN3264) && !defined(FEAT_GUI_W32)) # define MCH_CURSOR_SHAPE # endif # if defined(FEAT_GUI_W32) || defined(FEAT_GUI_W16) || defined(FEAT_GUI_MOTIF) \ || defined(FEAT_GUI_ATHENA) || defined(FEAT_GUI_GTK) \ || defined(FEAT_GUI_PHOTON) # define FEAT_MOUSESHAPE # endif #endif /* GUI and some consoles can change the shape of the cursor. The code is also * needed for the 'mouseshape' and 'concealcursor' options. */ #if defined(FEAT_GUI) \ || defined(MCH_CURSOR_SHAPE) \ || defined(FEAT_MOUSESHAPE) \ || defined(FEAT_CONCEAL) \ || (defined(UNIX) && defined(FEAT_NORMAL)) # define CURSOR_SHAPE #endif #if defined(FEAT_MZSCHEME) && (defined(FEAT_GUI_W32) || defined(FEAT_GUI_GTK) \ || defined(FEAT_GUI_MOTIF) || defined(FEAT_GUI_ATHENA) \ || defined(FEAT_GUI_MAC)) # define MZSCHEME_GUI_THREADS #endif /* * +ARP Amiga only. Use arp.library, DOS 2.0 is not required. */ #if !defined(NO_ARP) && !defined(__amigaos4__) # define FEAT_ARP #endif /* * +GUI_Athena To compile Vim with or without the GUI (gvim) you have * +GUI_Motif to edit the Makefile. */ /* * +ole Win32 OLE automation: Use Makefile.ovc. */ /* * These features can only be included by using a configure argument. See the * Makefile for a line to uncomment. * +lua Lua interface: "--enable-luainterp" * +mzscheme MzScheme interface: "--enable-mzscheme" * +perl Perl interface: "--enable-perlinterp" * +python Python interface: "--enable-pythoninterp" * +tcl TCL interface: "--enable-tclinterp" * +sniff Sniff interface: "--enable-sniff" * +sun_workshop Sun Workshop integration * +netbeans_intg Netbeans integration */ /* * These features are automatically detected: * +terminfo * +tgetent */ /* * The Sun Workshop features currently only work with Motif. */ #if !defined(FEAT_GUI_MOTIF) && defined(FEAT_SUN_WORKSHOP) # undef FEAT_SUN_WORKSHOP #endif /* * The Netbeans feature requires +listcmds and +eval. */ #if (!defined(FEAT_LISTCMDS) || !defined(FEAT_EVAL)) \ && defined(FEAT_NETBEANS_INTG) # undef FEAT_NETBEANS_INTG #endif /* * +signs Allow signs to be displayed to the left of text lines. * Adds the ":sign" command. */ #if defined(FEAT_BIG) || defined(FEAT_SUN_WORKSHOP) \ || defined(FEAT_NETBEANS_INTG) # define FEAT_SIGNS # if ((defined(FEAT_GUI_MOTIF) || defined(FEAT_GUI_ATHENA)) \ && defined(HAVE_X11_XPM_H)) \ || defined(FEAT_GUI_GTK) \ || (defined(WIN32) && defined(FEAT_GUI)) # define FEAT_SIGN_ICONS # endif #endif /* * +balloon_eval Allow balloon expression evaluation. Used with a * debugger and for tooltips. * Only for GUIs where it was implemented. */ #if (defined(FEAT_GUI_MOTIF) || defined(FEAT_GUI_ATHENA) \ || defined(FEAT_GUI_GTK) || defined(FEAT_GUI_W32)) \ && ( ((defined(FEAT_TOOLBAR) || defined(FEAT_GUI_TABLINE)) \ && !defined(FEAT_GUI_GTK) && !defined(FEAT_GUI_W32)) \ || defined(FEAT_SUN_WORKSHOP) \ || defined(FEAT_NETBEANS_INTG) || defined(FEAT_EVAL)) # define FEAT_BEVAL # if !defined(FEAT_XFONTSET) && !defined(FEAT_GUI_GTK) \ && !defined(FEAT_GUI_W32) # define FEAT_XFONTSET # endif #endif #if defined(FEAT_BEVAL) && (defined(FEAT_GUI_MOTIF) || defined(FEAT_GUI_ATHENA)) # define FEAT_BEVAL_TIP /* balloon eval used for toolbar tooltip */ #endif /* both Motif and Athena are X11 and share some code */ #if defined(FEAT_GUI_MOTIF) || defined(FEAT_GUI_ATHENA) # define FEAT_GUI_X11 #endif #if defined(FEAT_SUN_WORKSHOP) || defined(FEAT_NETBEANS_INTG) /* * The following features are (currently) only used by Sun Visual WorkShop 6 * and NetBeans. These features could be used with other integrations with * debuggers so I've used separate feature defines. */ # if !defined(FEAT_MENU) # define FEAT_MENU # endif #endif #if defined(FEAT_SUN_WORKSHOP) /* * Use an alternative method of X input for a secondary * command input. */ # define ALT_X_INPUT /* * +footer Motif only: Add a message area at the bottom of the * main window area. */ # define FEAT_FOOTER #endif /* * +autochdir 'autochdir' option. */ #if defined(FEAT_SUN_WORKSHOP) || defined(FEAT_NETBEANS_INTG) \ || defined(FEAT_BIG) # define FEAT_AUTOCHDIR #endif /* * +persistent_undo 'undofile', 'undodir' options, :wundo and :rundo, and * implementation. */ #ifdef FEAT_NORMAL # define FEAT_PERSISTENT_UNDO #endif