/* * "$Id: job.c 12142 2014-08-30 02:35:43Z msweet $" * * Job management routines for the CUPS scheduler. * * Copyright 2007-2014 by Apple Inc. * Copyright 1997-2007 by Easy Software Products, all rights reserved. * * These coded instructions, statements, and computer programs are the * property of Apple Inc. and are protected by Federal copyright * law. Distribution and use rights are outlined in the file "LICENSE.txt" * which should have been included with this file. If this file is * file is missing or damaged, see the license at "http://www.cups.org/". */ /* * Include necessary headers... */ #include "cupsd.h" #include #include #include #ifdef __APPLE__ # include # ifdef HAVE_IOKIT_PWR_MGT_IOPMLIBPRIVATE_H # include # endif /* HAVE_IOKIT_PWR_MGT_IOPMLIBPRIVATE_H */ #endif /* __APPLE__ */ /* * Design Notes for Job Management * ------------------------------- * * STATE CHANGES * * pending Do nothing/check jobs * pending-held Send SIGTERM to filters and backend * processing Do nothing/start job * stopped Send SIGKILL to filters and backend * canceled Send SIGTERM to filters and backend * aborted Finalize * completed Finalize * * Finalize clears the printer <-> job association, deletes the status * buffer, closes all of the pipes, etc. and doesn't get run until all of * the print processes are finished. * * UNLOADING OF JOBS (cupsdUnloadCompletedJobs) * * We unload the job attributes when they are not needed to reduce overall * memory consumption. We don't unload jobs where job->state_value < * IPP_JOB_STOPPED, job->printer != NULL, or job->access_time is recent. * * STARTING OF JOBS (start_job) * * When a job is started, a status buffer, several pipes, a security * profile, and a backend process are created for the life of that job. * These are shared for every file in a job. For remote print jobs, the * IPP backend is provided with every file in the job and no filters are * run. * * The job->printer member tracks which printer is printing a job, which * can be different than the destination in job->dest for classes. The * printer object also has a job pointer to track which job is being * printed. * * PRINTING OF JOB FILES (cupsdContinueJob) * * Each file in a job is filtered by 0 or more programs. After getting the * list of filters needed and the total cost, the job is either passed or * put back to the processing state until the current FilterLevel comes down * enough to allow printing. * * If we can print, we build a string for the print options and run each of * the filters, piping the output from one into the next. * * JOB STATUS UPDATES (update_job) * * The update_job function gets called whenever there are pending messages * on the status pipe. These generally are updates to the marker-*, * printer-state-message, or printer-state-reasons attributes. On EOF, * finalize_job is called to clean up. * * FINALIZING JOBS (finalize_job) * * When all filters and the backend are done, we set the job state to * completed (no errors), aborted (filter errors or abort-job policy), * pending-held (auth required or retry-job policy), or pending * (retry-current-job or stop-printer policies) as appropriate. * * Then we close the pipes and free the status buffers and profiles. * * JOB FILE COMPLETION (process_children in main.c) * * For multiple-file jobs, process_children (in main.c) sees that all * filters have exited and calls in to print the next file if there are * more files in the job, otherwise it waits for the backend to exit and * update_job to do the cleanup. */ /* * Local globals... */ static mime_filter_t gziptoany_filter = { NULL, /* Source type */ NULL, /* Destination type */ 0, /* Cost */ "gziptoany" /* Filter program to run */ }; /* * Local functions... */ static int compare_active_jobs(void *first, void *second, void *data); static int compare_completed_jobs(void *first, void *second, void *data); static int compare_jobs(void *first, void *second, void *data); static void dump_job_history(cupsd_job_t *job); static void finalize_job(cupsd_job_t *job, int set_job_state); static void free_job_history(cupsd_job_t *job); static char *get_options(cupsd_job_t *job, int banner_page, char *copies, size_t copies_size, char *title, size_t title_size); static size_t ipp_length(ipp_t *ipp); static void load_job_cache(const char *filename); static void load_next_job_id(const char *filename); static void load_request_root(void); static void remove_job_files(cupsd_job_t *job); static void remove_job_history(cupsd_job_t *job); static void set_time(cupsd_job_t *job, const char *name); static void start_job(cupsd_job_t *job, cupsd_printer_t *printer); static void stop_job(cupsd_job_t *job, cupsd_jobaction_t action); static void unload_job(cupsd_job_t *job); static void update_job(cupsd_job_t *job); static void update_job_attrs(cupsd_job_t *job, int do_message); /* * 'cupsdAddJob()' - Add a new job to the job queue. */ cupsd_job_t * /* O - New job record */ cupsdAddJob(int priority, /* I - Job priority */ const char *dest) /* I - Job destination */ { cupsd_job_t *job; /* New job record */ if ((job = calloc(sizeof(cupsd_job_t), 1)) == NULL) return (NULL); job->id = NextJobId ++; job->priority = priority; job->back_pipes[0] = -1; job->back_pipes[1] = -1; job->print_pipes[0] = -1; job->print_pipes[1] = -1; job->side_pipes[0] = -1; job->side_pipes[1] = -1; job->status_pipes[0] = -1; job->status_pipes[1] = -1; cupsdSetString(&job->dest, dest); /* * Add the new job to the "all jobs" and "active jobs" lists... */ cupsArrayAdd(Jobs, job); cupsArrayAdd(ActiveJobs, job); return (job); } /* * 'cupsdCancelJobs()' - Cancel all jobs for the given destination/user. */ void cupsdCancelJobs(const char *dest, /* I - Destination to cancel */ const char *username, /* I - Username or NULL */ int purge) /* I - Purge jobs? */ { cupsd_job_t *job; /* Current job */ for (job = (cupsd_job_t *)cupsArrayFirst(Jobs); job; job = (cupsd_job_t *)cupsArrayNext(Jobs)) { if ((!job->dest || !job->username) && !cupsdLoadJob(job)) continue; if ((!dest || !strcmp(job->dest, dest)) && (!username || !strcmp(job->username, username))) { /* * Cancel all jobs matching this destination/user... */ if (purge) cupsdSetJobState(job, IPP_JOB_CANCELED, CUPSD_JOB_PURGE, "Job purged by user."); else if (job->state_value < IPP_JOB_CANCELED) cupsdSetJobState(job, IPP_JOB_CANCELED, CUPSD_JOB_DEFAULT, "Job canceled by user."); } } cupsdCheckJobs(); } /* * 'cupsdCheckJobs()' - Check the pending jobs and start any if the destination * is available. */ void cupsdCheckJobs(void) { cupsd_job_t *job; /* Current job in queue */ cupsd_printer_t *printer, /* Printer destination */ *pclass; /* Printer class destination */ ipp_attribute_t *attr; /* Job attribute */ time_t curtime; /* Current time */ curtime = time(NULL); cupsdLogMessage(CUPSD_LOG_DEBUG2, "cupsdCheckJobs: %d active jobs, sleeping=%d, ac-power=%d, reload=%d, curtime=%ld", cupsArrayCount(ActiveJobs), Sleeping, ACPower, NeedReload, (long)curtime); for (job = (cupsd_job_t *)cupsArrayFirst(ActiveJobs); job; job = (cupsd_job_t *)cupsArrayNext(ActiveJobs)) { cupsdLogMessage(CUPSD_LOG_DEBUG2, "cupsdCheckJobs: Job %d - dest=\"%s\", printer=%p, " "state=%d, cancel_time=%ld, hold_until=%ld, kill_time=%ld, " "pending_cost=%d, pending_timeout=%ld", job->id, job->dest, job->printer, job->state_value, (long)job->cancel_time, (long)job->hold_until, (long)job->kill_time, job->pending_cost, (long)job->pending_timeout); /* * Kill jobs if they are unresponsive... */ if (job->kill_time && job->kill_time <= curtime) { if (!job->completed) cupsdLogJob(job, CUPSD_LOG_ERROR, "Stopping unresponsive job."); stop_job(job, CUPSD_JOB_FORCE); continue; } /* * Cancel stuck jobs... */ if (job->cancel_time && job->cancel_time <= curtime) { int cancel_after; /* job-cancel-after value */ attr = ippFindAttribute(job->attrs, "job-cancel-after", IPP_TAG_INTEGER); cancel_after = attr ? ippGetInteger(attr, 0) : MaxJobTime; if (job->completed) cupsdSetJobState(job, IPP_JOB_CANCELED, CUPSD_JOB_FORCE, "Marking stuck job as completed after %d seconds.", cancel_after); else cupsdSetJobState(job, IPP_JOB_CANCELED, CUPSD_JOB_DEFAULT, "Canceling stuck job after %d seconds.", cancel_after); continue; } /* * Start held jobs if they are ready... */ if (job->state_value == IPP_JOB_HELD && job->hold_until && job->hold_until < curtime) { if (job->pending_timeout) { /* * This job is pending; check that we don't have an active Send-Document * operation in progress on any of the client connections, then timeout * the job so we can start printing... */ cupsd_client_t *con; /* Current client connection */ for (con = (cupsd_client_t *)cupsArrayFirst(Clients); con; con = (cupsd_client_t *)cupsArrayNext(Clients)) if (con->request && con->request->request.op.operation_id == IPP_SEND_DOCUMENT) break; if (con) continue; if (cupsdTimeoutJob(job)) continue; } cupsdSetJobState(job, IPP_JOB_PENDING, CUPSD_JOB_DEFAULT, "Job submission timed out."); } /* * Continue jobs that are waiting on the FilterLimit... */ if (job->pending_cost > 0 && ((FilterLevel + job->pending_cost) < FilterLimit || FilterLevel == 0)) cupsdContinueJob(job); /* * Start pending jobs if the destination is available... */ if (job->state_value == IPP_JOB_PENDING && !NeedReload && (!Sleeping || ACPower) && !DoingShutdown && !job->printer) { printer = cupsdFindDest(job->dest); pclass = NULL; while (printer && (printer->type & CUPS_PRINTER_CLASS)) { /* * If the class is remote, just pass it to the remote server... */ pclass = printer; if (pclass->state == IPP_PRINTER_STOPPED) printer = NULL; else if (pclass->type & CUPS_PRINTER_REMOTE) break; else printer = cupsdFindAvailablePrinter(printer->name); } if (!printer && !pclass) { /* * Whoa, the printer and/or class for this destination went away; * cancel the job... */ cupsdSetJobState(job, IPP_JOB_ABORTED, CUPSD_JOB_PURGE, "Job aborted because the destination printer/class " "has gone away."); } else if (printer && !printer->holding_new_jobs) { /* * See if the printer is available or remote and not printing a job; * if so, start the job... */ if (pclass) { /* * Add/update a job-actual-printer-uri attribute for this job * so that we know which printer actually printed the job... */ if ((attr = ippFindAttribute(job->attrs, "job-actual-printer-uri", IPP_TAG_URI)) != NULL) cupsdSetString(&attr->values[0].string.text, printer->uri); else ippAddString(job->attrs, IPP_TAG_JOB, IPP_TAG_URI, "job-actual-printer-uri", NULL, printer->uri); job->dirty = 1; cupsdMarkDirty(CUPSD_DIRTY_JOBS); } if (!printer->job && printer->state == IPP_PRINTER_IDLE) { /* * Start the job... */ start_job(job, printer); } } } } } /* * 'cupsdCleanJobs()' - Clean out old jobs. */ void cupsdCleanJobs(void) { cupsd_job_t *job; /* Current job */ time_t curtime; /* Current time */ cupsdLogMessage(CUPSD_LOG_DEBUG2, "cupsdCleanJobs: MaxJobs=%d, JobHistory=%d, JobFiles=%d", MaxJobs, JobHistory, JobFiles); if (MaxJobs <= 0 && JobHistory == INT_MAX && JobFiles == INT_MAX) return; curtime = time(NULL); JobHistoryUpdate = 0; for (job = (cupsd_job_t *)cupsArrayFirst(Jobs); job; job = (cupsd_job_t *)cupsArrayNext(Jobs)) { if (job->state_value >= IPP_JOB_CANCELED && !job->printer) { /* * Expire old jobs (or job files)... */ if ((MaxJobs > 0 && cupsArrayCount(Jobs) >= MaxJobs) || (job->history_time && job->history_time <= curtime)) { cupsdLogJob(job, CUPSD_LOG_DEBUG, "Removing from history."); cupsdDeleteJob(job, CUPSD_JOB_PURGE); } else if (job->file_time && job->file_time <= curtime) { cupsdLogJob(job, CUPSD_LOG_DEBUG, "Removing document files."); remove_job_files(job); if (job->history_time < JobHistoryUpdate || !JobHistoryUpdate) JobHistoryUpdate = job->history_time; } else { if (job->history_time < JobHistoryUpdate || !JobHistoryUpdate) JobHistoryUpdate = job->history_time; if (job->file_time < JobHistoryUpdate || !JobHistoryUpdate) JobHistoryUpdate = job->file_time; } } } cupsdLogMessage(CUPSD_LOG_DEBUG2, "cupsdCleanJobs: JobHistoryUpdate=%ld", (long)JobHistoryUpdate); } /* * 'cupsdContinueJob()' - Continue printing with the next file in a job. */ void cupsdContinueJob(cupsd_job_t *job) /* I - Job */ { int i; /* Looping var */ int slot; /* Pipe slot */ cups_array_t *filters = NULL,/* Filters for job */ *prefilters; /* Filters with prefilters */ mime_filter_t *filter, /* Current filter */ *prefilter, /* Prefilter */ port_monitor; /* Port monitor filter */ char scheme[255]; /* Device URI scheme */ ipp_attribute_t *attr; /* Current attribute */ const char *ptr, /* Pointer into value */ *abort_message; /* Abort message */ ipp_jstate_t abort_state = IPP_JOB_STOPPED; /* New job state on abort */ struct stat backinfo; /* Backend file information */ int backroot; /* Run backend as root? */ int pid; /* Process ID of new filter process */ int banner_page; /* 1 if banner page, 0 otherwise */ int filterfds[2][2] = { { -1, -1 }, { -1, -1 } }; /* Pipes used between filters */ int envc; /* Number of environment variables */ struct stat fileinfo; /* Job file information */ int argc; /* Number of arguments */ char **argv = NULL, /* Filter command-line arguments */ filename[1024], /* Job filename */ command[1024], /* Full path to command */ jobid[255], /* Job ID string */ title[IPP_MAX_NAME], /* Job title string */ copies[255], /* # copies string */ *options, /* Options string */ *envp[MAX_ENV + 21], /* Environment variables */ charset[255], /* CHARSET env variable */ class_name[255],/* CLASS env variable */ classification[1024], /* CLASSIFICATION env variable */ content_type[1024], /* CONTENT_TYPE env variable */ device_uri[1024], /* DEVICE_URI env variable */ final_content_type[1024] = "", /* FINAL_CONTENT_TYPE env variable */ lang[255], /* LANG env variable */ #ifdef __APPLE__ apple_language[255], /* APPLE_LANGUAGE env variable */ #endif /* __APPLE__ */ auth_info_required[255], /* AUTH_INFO_REQUIRED env variable */ ppd[1024], /* PPD env variable */ printer_info[255], /* PRINTER_INFO env variable */ printer_location[255], /* PRINTER_LOCATION env variable */ printer_name[255], /* PRINTER env variable */ *printer_state_reasons = NULL, /* PRINTER_STATE_REASONS env var */ rip_max_cache[255]; /* RIP_MAX_CACHE env variable */ cupsdLogMessage(CUPSD_LOG_DEBUG2, "cupsdContinueJob(job=%p(%d)): current_file=%d, num_files=%d", job, job->id, job->current_file, job->num_files); /* * Figure out what filters are required to convert from * the source to the destination type... */ FilterLevel -= job->cost; job->cost = 0; job->pending_cost = 0; memset(job->filters, 0, sizeof(job->filters)); if (job->printer->raw) { /* * Remote jobs and raw queues go directly to the printer without * filtering... */ cupsdLogJob(job, CUPSD_LOG_DEBUG, "Sending job to queue tagged as raw..."); } else { /* * Local jobs get filtered... */ mime_type_t *dst = job->printer->filetype; /* Destination file type */ snprintf(filename, sizeof(filename), "%s/d%05d-%03d", RequestRoot, job->id, job->current_file + 1); if (stat(filename, &fileinfo)) fileinfo.st_size = 0; if (job->retry_as_raster) { /* * Need to figure out whether the printer supports image/pwg-raster or * image/urf, and use the corresponding type... */ char type[MIME_MAX_TYPE]; /* MIME media type for printer */ snprintf(type, sizeof(type), "%s/image/urf", job->printer->name); if ((dst = mimeType(MimeDatabase, "printer", type)) == NULL) { snprintf(type, sizeof(type), "%s/image/pwg-raster", job->printer->name); dst = mimeType(MimeDatabase, "printer", type); } if (dst) cupsdLogJob(job, CUPSD_LOG_DEBUG, "Retrying job as \"%s\".", strchr(dst->type, '/') + 1); else cupsdLogJob(job, CUPSD_LOG_ERROR, "Unable to retry job using a supported raster format."); } filters = mimeFilter2(MimeDatabase, job->filetypes[job->current_file], (size_t)fileinfo.st_size, dst, &(job->cost)); if (!filters) { cupsdLogJob(job, CUPSD_LOG_ERROR, "Unable to convert file %d to printable format.", job->current_file); abort_message = "Aborting job because it cannot be printed."; abort_state = IPP_JOB_ABORTED; ippSetString(job->attrs, &job->reasons, 0, "document-unprintable-error"); goto abort_job; } /* * Figure out the final content type... */ cupsdLogJob(job, CUPSD_LOG_DEBUG, "%d filters for job:", cupsArrayCount(filters)); for (filter = (mime_filter_t *)cupsArrayFirst(filters); filter; filter = (mime_filter_t *)cupsArrayNext(filters)) cupsdLogJob(job, CUPSD_LOG_DEBUG, "%s (%s/%s to %s/%s, cost %d)", filter->filter, filter->src ? filter->src->super : "???", filter->src ? filter->src->type : "???", filter->dst ? filter->dst->super : "???", filter->dst ? filter->dst->type : "???", filter->cost); if (!job->printer->remote) { for (filter = (mime_filter_t *)cupsArrayLast(filters); filter && filter->dst; filter = (mime_filter_t *)cupsArrayPrev(filters)) if (strcmp(filter->dst->super, "printer") || strcmp(filter->dst->type, job->printer->name)) break; if (filter && filter->dst) { if ((ptr = strchr(filter->dst->type, '/')) != NULL) snprintf(final_content_type, sizeof(final_content_type), "FINAL_CONTENT_TYPE=%s", ptr + 1); else snprintf(final_content_type, sizeof(final_content_type), "FINAL_CONTENT_TYPE=%s/%s", filter->dst->super, filter->dst->type); } else snprintf(final_content_type, sizeof(final_content_type), "FINAL_CONTENT_TYPE=printer/%s", job->printer->name); } /* * Remove NULL ("-") filters... */ for (filter = (mime_filter_t *)cupsArrayFirst(filters); filter; filter = (mime_filter_t *)cupsArrayNext(filters)) if (!strcmp(filter->filter, "-")) cupsArrayRemove(filters, filter); if (cupsArrayCount(filters) == 0) { cupsArrayDelete(filters); filters = NULL; } /* * If this printer has any pre-filters, insert the required pre-filter * in the filters array... */ if (job->printer->prefiltertype && filters) { prefilters = cupsArrayNew(NULL, NULL); for (filter = (mime_filter_t *)cupsArrayFirst(filters); filter; filter = (mime_filter_t *)cupsArrayNext(filters)) { if ((prefilter = mimeFilterLookup(MimeDatabase, filter->src, job->printer->prefiltertype))) { cupsArrayAdd(prefilters, prefilter); job->cost += prefilter->cost; } cupsArrayAdd(prefilters, filter); } cupsArrayDelete(filters); filters = prefilters; } } /* * Set a minimum cost of 100 for all jobs so that FilterLimit * works with raw queues and other low-cost paths. */ if (job->cost < 100) job->cost = 100; /* * See if the filter cost is too high... */ if ((FilterLevel + job->cost) > FilterLimit && FilterLevel > 0 && FilterLimit > 0) { /* * Don't print this job quite yet... */ cupsArrayDelete(filters); cupsdLogJob(job, CUPSD_LOG_INFO, "Holding because filter limit has been reached."); cupsdLogJob(job, CUPSD_LOG_DEBUG2, "cupsdContinueJob: file=%d, cost=%d, level=%d, limit=%d", job->current_file, job->cost, FilterLevel, FilterLimit); job->pending_cost = job->cost; job->cost = 0; return; } FilterLevel += job->cost; /* * Add decompression/raw filter as needed... */ if (job->compressions[job->current_file] && (!job->printer->remote || job->num_files == 1)) { /* * Add gziptoany filter to the front of the list... */ if (!filters) filters = cupsArrayNew(NULL, NULL); if (!cupsArrayInsert(filters, &gziptoany_filter)) { cupsdLogJob(job, CUPSD_LOG_DEBUG, "Unable to add decompression filter - %s", strerror(errno)); cupsArrayDelete(filters); abort_message = "Stopping job because the scheduler ran out of memory."; goto abort_job; } } /* * Add port monitor, if any... */ if (job->printer->port_monitor) { /* * Add port monitor to the end of the list... */ if (!filters) filters = cupsArrayNew(NULL, NULL); port_monitor.src = NULL; port_monitor.dst = NULL; port_monitor.cost = 0; snprintf(port_monitor.filter, sizeof(port_monitor.filter), "%s/monitor/%s", ServerBin, job->printer->port_monitor); if (!cupsArrayAdd(filters, &port_monitor)) { cupsdLogJob(job, CUPSD_LOG_DEBUG, "Unable to add port monitor - %s", strerror(errno)); abort_message = "Stopping job because the scheduler ran out of memory."; goto abort_job; } } /* * Make sure we don't go over the "MAX_FILTERS" limit... */ if (cupsArrayCount(filters) > MAX_FILTERS) { cupsdLogJob(job, CUPSD_LOG_DEBUG, "Too many filters (%d > %d), unable to print.", cupsArrayCount(filters), MAX_FILTERS); abort_message = "Aborting job because it needs too many filters to print."; abort_state = IPP_JOB_ABORTED; ippSetString(job->attrs, &job->reasons, 0, "document-unprintable-error"); goto abort_job; } /* * Determine if we are printing a banner page or not... */ if (job->job_sheets == NULL) { cupsdLogJob(job, CUPSD_LOG_DEBUG, "No job-sheets attribute."); if ((job->job_sheets = ippFindAttribute(job->attrs, "job-sheets", IPP_TAG_ZERO)) != NULL) cupsdLogJob(job, CUPSD_LOG_DEBUG, "... but someone added one without setting job_sheets."); } else if (job->job_sheets->num_values == 1) cupsdLogJob(job, CUPSD_LOG_DEBUG, "job-sheets=%s", job->job_sheets->values[0].string.text); else cupsdLogJob(job, CUPSD_LOG_DEBUG, "job-sheets=%s,%s", job->job_sheets->values[0].string.text, job->job_sheets->values[1].string.text); if (job->printer->type & CUPS_PRINTER_REMOTE) banner_page = 0; else if (job->job_sheets == NULL) banner_page = 0; else if (_cups_strcasecmp(job->job_sheets->values[0].string.text, "none") != 0 && job->current_file == 0) banner_page = 1; else if (job->job_sheets->num_values > 1 && _cups_strcasecmp(job->job_sheets->values[1].string.text, "none") != 0 && job->current_file == (job->num_files - 1)) banner_page = 1; else banner_page = 0; if ((options = get_options(job, banner_page, copies, sizeof(copies), title, sizeof(title))) == NULL) { abort_message = "Stopping job because the scheduler ran out of memory."; goto abort_job; } /* * Build the command-line arguments for the filters. Each filter * has 6 or 7 arguments: * * argv[0] = printer * argv[1] = job ID * argv[2] = username * argv[3] = title * argv[4] = # copies * argv[5] = options * argv[6] = filename (optional; normally stdin) * * This allows legacy printer drivers that use the old System V * printing interface to be used by CUPS. * * For remote jobs, we send all of the files in the argument list. */ if (job->printer->remote) argc = 6 + job->num_files; else argc = 7; if ((argv = calloc((size_t)argc + 1, sizeof(char *))) == NULL) { cupsdLogMessage(CUPSD_LOG_DEBUG, "Unable to allocate argument array - %s", strerror(errno)); abort_message = "Stopping job because the scheduler ran out of memory."; goto abort_job; } sprintf(jobid, "%d", job->id); argv[0] = job->printer->name; argv[1] = jobid; argv[2] = job->username; argv[3] = title; argv[4] = copies; argv[5] = options; if (job->printer->remote && job->num_files > 1) { for (i = 0; i < job->num_files; i ++) { snprintf(filename, sizeof(filename), "%s/d%05d-%03d", RequestRoot, job->id, i + 1); argv[6 + i] = strdup(filename); } } else { snprintf(filename, sizeof(filename), "%s/d%05d-%03d", RequestRoot, job->id, job->current_file + 1); argv[6] = strdup(filename); } for (i = 0; argv[i]; i ++) cupsdLogJob(job, CUPSD_LOG_DEBUG, "argv[%d]=\"%s\"", i, argv[i]); /* * Create environment variable strings for the filters... */ attr = ippFindAttribute(job->attrs, "attributes-natural-language", IPP_TAG_LANGUAGE); #ifdef __APPLE__ strlcpy(apple_language, "APPLE_LANGUAGE=", sizeof(apple_language)); _cupsAppleLanguage(attr->values[0].string.text, apple_language + 15, sizeof(apple_language) - 15); #endif /* __APPLE__ */ switch (strlen(attr->values[0].string.text)) { default : /* * This is an unknown or badly formatted language code; use * the POSIX locale... */ strlcpy(lang, "LANG=C", sizeof(lang)); break; case 2 : /* * Just the language code (ll)... */ snprintf(lang, sizeof(lang), "LANG=%s.UTF-8", attr->values[0].string.text); break; case 5 : /* * Language and country code (ll-cc)... */ snprintf(lang, sizeof(lang), "LANG=%c%c_%c%c.UTF-8", attr->values[0].string.text[0], attr->values[0].string.text[1], toupper(attr->values[0].string.text[3] & 255), toupper(attr->values[0].string.text[4] & 255)); break; } if ((attr = ippFindAttribute(job->attrs, "document-format", IPP_TAG_MIMETYPE)) != NULL && (ptr = strstr(attr->values[0].string.text, "charset=")) != NULL) snprintf(charset, sizeof(charset), "CHARSET=%s", ptr + 8); else strlcpy(charset, "CHARSET=utf-8", sizeof(charset)); snprintf(content_type, sizeof(content_type), "CONTENT_TYPE=%s/%s", job->filetypes[job->current_file]->super, job->filetypes[job->current_file]->type); snprintf(device_uri, sizeof(device_uri), "DEVICE_URI=%s", job->printer->device_uri); snprintf(ppd, sizeof(ppd), "PPD=%s/ppd/%s.ppd", ServerRoot, job->printer->name); snprintf(printer_info, sizeof(printer_name), "PRINTER_INFO=%s", job->printer->info ? job->printer->info : ""); snprintf(printer_location, sizeof(printer_name), "PRINTER_LOCATION=%s", job->printer->location ? job->printer->location : ""); snprintf(printer_name, sizeof(printer_name), "PRINTER=%s", job->printer->name); if (job->printer->num_reasons > 0) { char *psrptr; /* Pointer into PRINTER_STATE_REASONS */ size_t psrlen; /* Size of PRINTER_STATE_REASONS */ for (psrlen = 22, i = 0; i < job->printer->num_reasons; i ++) psrlen += strlen(job->printer->reasons[i]) + 1; if ((printer_state_reasons = malloc(psrlen)) != NULL) { /* * All of these strcpy's are safe because we allocated the psr string... */ strlcpy(printer_state_reasons, "PRINTER_STATE_REASONS=", psrlen); for (psrptr = printer_state_reasons + 22, i = 0; i < job->printer->num_reasons; i ++) { if (i) *psrptr++ = ','; strlcpy(psrptr, job->printer->reasons[i], psrlen - (size_t)(psrptr - printer_state_reasons)); psrptr += strlen(psrptr); } } } snprintf(rip_max_cache, sizeof(rip_max_cache), "RIP_MAX_CACHE=%s", RIPCache); if (job->printer->num_auth_info_required == 1) snprintf(auth_info_required, sizeof(auth_info_required), "AUTH_INFO_REQUIRED=%s", job->printer->auth_info_required[0]); else if (job->printer->num_auth_info_required == 2) snprintf(auth_info_required, sizeof(auth_info_required), "AUTH_INFO_REQUIRED=%s,%s", job->printer->auth_info_required[0], job->printer->auth_info_required[1]); else if (job->printer->num_auth_info_required == 3) snprintf(auth_info_required, sizeof(auth_info_required), "AUTH_INFO_REQUIRED=%s,%s,%s", job->printer->auth_info_required[0], job->printer->auth_info_required[1], job->printer->auth_info_required[2]); else if (job->printer->num_auth_info_required == 4) snprintf(auth_info_required, sizeof(auth_info_required), "AUTH_INFO_REQUIRED=%s,%s,%s,%s", job->printer->auth_info_required[0], job->printer->auth_info_required[1], job->printer->auth_info_required[2], job->printer->auth_info_required[3]); else strlcpy(auth_info_required, "AUTH_INFO_REQUIRED=none", sizeof(auth_info_required)); envc = cupsdLoadEnv(envp, (int)(sizeof(envp) / sizeof(envp[0]))); envp[envc ++] = charset; envp[envc ++] = lang; #ifdef __APPLE__ envp[envc ++] = apple_language; #endif /* __APPLE__ */ envp[envc ++] = ppd; envp[envc ++] = rip_max_cache; envp[envc ++] = content_type; envp[envc ++] = device_uri; envp[envc ++] = printer_info; envp[envc ++] = printer_location; envp[envc ++] = printer_name; envp[envc ++] = printer_state_reasons ? printer_state_reasons : "PRINTER_STATE_REASONS=none"; envp[envc ++] = banner_page ? "CUPS_FILETYPE=job-sheet" : "CUPS_FILETYPE=document"; if (final_content_type[0]) envp[envc ++] = final_content_type; if (Classification && !banner_page) { if ((attr = ippFindAttribute(job->attrs, "job-sheets", IPP_TAG_NAME)) == NULL) snprintf(classification, sizeof(classification), "CLASSIFICATION=%s", Classification); else if (attr->num_values > 1 && strcmp(attr->values[1].string.text, "none") != 0) snprintf(classification, sizeof(classification), "CLASSIFICATION=%s", attr->values[1].string.text); else snprintf(classification, sizeof(classification), "CLASSIFICATION=%s", attr->values[0].string.text); envp[envc ++] = classification; } if (job->dtype & CUPS_PRINTER_CLASS) { snprintf(class_name, sizeof(class_name), "CLASS=%s", job->dest); envp[envc ++] = class_name; } envp[envc ++] = auth_info_required; for (i = 0; i < (int)(sizeof(job->auth_env) / sizeof(job->auth_env[0])); i ++) if (job->auth_env[i]) envp[envc ++] = job->auth_env[i]; else break; if (job->auth_uid) envp[envc ++] = job->auth_uid; envp[envc] = NULL; for (i = 0; i < envc; i ++) if (!strncmp(envp[i], "AUTH_", 5)) cupsdLogJob(job, CUPSD_LOG_DEBUG, "envp[%d]=\"AUTH_%c****\"", i, envp[i][5]); else if (strncmp(envp[i], "DEVICE_URI=", 11)) cupsdLogJob(job, CUPSD_LOG_DEBUG, "envp[%d]=\"%s\"", i, envp[i]); else cupsdLogJob(job, CUPSD_LOG_DEBUG, "envp[%d]=\"DEVICE_URI=%s\"", i, job->printer->sanitized_device_uri); if (job->printer->remote) job->current_file = job->num_files; else job->current_file ++; /* * Now create processes for all of the filters... */ for (i = 0, slot = 0, filter = (mime_filter_t *)cupsArrayFirst(filters); filter; i ++, filter = (mime_filter_t *)cupsArrayNext(filters)) { if (filter->filter[0] != '/') snprintf(command, sizeof(command), "%s/filter/%s", ServerBin, filter->filter); else strlcpy(command, filter->filter, sizeof(command)); if (i < (cupsArrayCount(filters) - 1)) { if (cupsdOpenPipe(filterfds[slot])) { abort_message = "Stopping job because the scheduler could not create " "the filter pipes."; goto abort_job; } } else { if (job->current_file == 1 || (job->printer->pc && job->printer->pc->single_file)) { if (strncmp(job->printer->device_uri, "file:", 5) != 0) { if (cupsdOpenPipe(job->print_pipes)) { abort_message = "Stopping job because the scheduler could not " "create the backend pipes."; goto abort_job; } } else { job->print_pipes[0] = -1; if (!strcmp(job->printer->device_uri, "file:/dev/null") || !strcmp(job->printer->device_uri, "file:///dev/null")) job->print_pipes[1] = -1; else { if (!strncmp(job->printer->device_uri, "file:/dev/", 10)) job->print_pipes[1] = open(job->printer->device_uri + 5, O_WRONLY | O_EXCL); else if (!strncmp(job->printer->device_uri, "file:///dev/", 12)) job->print_pipes[1] = open(job->printer->device_uri + 7, O_WRONLY | O_EXCL); else if (!strncmp(job->printer->device_uri, "file:///", 8)) job->print_pipes[1] = open(job->printer->device_uri + 7, O_WRONLY | O_CREAT | O_TRUNC, 0600); else job->print_pipes[1] = open(job->printer->device_uri + 5, O_WRONLY | O_CREAT | O_TRUNC, 0600); if (job->print_pipes[1] < 0) { abort_message = "Stopping job because the scheduler could not " "open the output file."; goto abort_job; } fcntl(job->print_pipes[1], F_SETFD, fcntl(job->print_pipes[1], F_GETFD) | FD_CLOEXEC); } } } filterfds[slot][0] = job->print_pipes[0]; filterfds[slot][1] = job->print_pipes[1]; } pid = cupsdStartProcess(command, argv, envp, filterfds[!slot][0], filterfds[slot][1], job->status_pipes[1], job->back_pipes[0], job->side_pipes[0], 0, job->profile, job, job->filters + i); cupsdClosePipe(filterfds[!slot]); if (pid == 0) { cupsdLogJob(job, CUPSD_LOG_ERROR, "Unable to start filter \"%s\" - %s.", filter->filter, strerror(errno)); abort_message = "Stopping job because the scheduler could not execute a " "filter."; goto abort_job; } cupsdLogJob(job, CUPSD_LOG_INFO, "Started filter %s (PID %d)", command, pid); if (argv[6]) { free(argv[6]); argv[6] = NULL; } slot = !slot; } cupsArrayDelete(filters); filters = NULL; /* * Finally, pipe the final output into a backend process if needed... */ if (strncmp(job->printer->device_uri, "file:", 5) != 0) { if (job->current_file == 1 || job->printer->remote || (job->printer->pc && job->printer->pc->single_file)) { sscanf(job->printer->device_uri, "%254[^:]", scheme); snprintf(command, sizeof(command), "%s/backend/%s", ServerBin, scheme); /* * See if the backend needs to run as root... */ if (RunUser) backroot = 0; else if (stat(command, &backinfo)) backroot = 0; else backroot = !(backinfo.st_mode & (S_IWGRP | S_IRWXO)); argv[0] = job->printer->sanitized_device_uri; filterfds[slot][0] = -1; filterfds[slot][1] = -1; pid = cupsdStartProcess(command, argv, envp, filterfds[!slot][0], filterfds[slot][1], job->status_pipes[1], job->back_pipes[1], job->side_pipes[1], backroot, job->bprofile, job, &(job->backend)); if (pid == 0) { abort_message = "Stopping job because the sheduler could not execute " "the backend."; goto abort_job; } else { cupsdLogJob(job, CUPSD_LOG_INFO, "Started backend %s (PID %d)", command, pid); } } if (job->current_file == job->num_files || (job->printer->pc && job->printer->pc->single_file)) cupsdClosePipe(job->print_pipes); if (job->current_file == job->num_files) { cupsdClosePipe(job->back_pipes); cupsdClosePipe(job->side_pipes); close(job->status_pipes[1]); job->status_pipes[1] = -1; } } else { filterfds[slot][0] = -1; filterfds[slot][1] = -1; if (job->current_file == job->num_files || (job->printer->pc && job->printer->pc->single_file)) cupsdClosePipe(job->print_pipes); if (job->current_file == job->num_files) { close(job->status_pipes[1]); job->status_pipes[1] = -1; } } cupsdClosePipe(filterfds[slot]); for (i = 6; i < argc; i ++) if (argv[i]) free(argv[i]); free(argv); if (printer_state_reasons) free(printer_state_reasons); cupsdAddSelect(job->status_buffer->fd, (cupsd_selfunc_t)update_job, NULL, job); cupsdAddEvent(CUPSD_EVENT_JOB_STATE, job->printer, job, "Job #%d started.", job->id); return; /* * If we get here, we need to abort the current job and close out all * files and pipes... */ abort_job: FilterLevel -= job->cost; job->cost = 0; for (slot = 0; slot < 2; slot ++) cupsdClosePipe(filterfds[slot]); cupsArrayDelete(filters); if (argv) { for (i = 6; i < argc; i ++) if (argv[i]) free(argv[i]); } if (printer_state_reasons) free(printer_state_reasons); cupsdClosePipe(job->print_pipes); cupsdClosePipe(job->back_pipes); cupsdClosePipe(job->side_pipes); cupsdRemoveSelect(job->status_pipes[0]); cupsdClosePipe(job->status_pipes); cupsdStatBufDelete(job->status_buffer); job->status_buffer = NULL; /* * Update the printer and job state. */ cupsdSetJobState(job, abort_state, CUPSD_JOB_DEFAULT, "%s", abort_message); cupsdSetPrinterState(job->printer, IPP_PRINTER_IDLE, 0); update_job_attrs(job, 0); if (job->history) free_job_history(job); cupsArrayRemove(PrintingJobs, job); /* * Clear the printer <-> job association... */ job->printer->job = NULL; job->printer = NULL; } /* * 'cupsdDeleteJob()' - Free all memory used by a job. */ void cupsdDeleteJob(cupsd_job_t *job, /* I - Job */ cupsd_jobaction_t action)/* I - Action */ { int i; /* Looping var */ if (job->printer) finalize_job(job, 1); if (action == CUPSD_JOB_PURGE) remove_job_history(job); cupsdClearString(&job->username); cupsdClearString(&job->dest); for (i = 0; i < (int)(sizeof(job->auth_env) / sizeof(job->auth_env[0])); i ++) cupsdClearString(job->auth_env + i); cupsdClearString(&job->auth_uid); if (action == CUPSD_JOB_PURGE) remove_job_files(job); else if (job->num_files > 0) { free(job->compressions); free(job->filetypes); job->num_files = 0; } if (job->history) free_job_history(job); unload_job(job); cupsArrayRemove(Jobs, job); cupsArrayRemove(ActiveJobs, job); cupsArrayRemove(PrintingJobs, job); free(job); } /* * 'cupsdFreeAllJobs()' - Free all jobs from memory. */ void cupsdFreeAllJobs(void) { cupsd_job_t *job; /* Current job */ if (!Jobs) return; cupsdHoldSignals(); cupsdStopAllJobs(CUPSD_JOB_FORCE, 0); cupsdSaveAllJobs(); for (job = (cupsd_job_t *)cupsArrayFirst(Jobs); job; job = (cupsd_job_t *)cupsArrayNext(Jobs)) cupsdDeleteJob(job, CUPSD_JOB_DEFAULT); cupsdReleaseSignals(); } /* * 'cupsdFindJob()' - Find the specified job. */ cupsd_job_t * /* O - Job data */ cupsdFindJob(int id) /* I - Job ID */ { cupsd_job_t key; /* Search key */ key.id = id; return ((cupsd_job_t *)cupsArrayFind(Jobs, &key)); } /* * 'cupsdGetCompletedJobs()'- Generate a completed jobs list. */ cups_array_t * /* O - Array of jobs */ cupsdGetCompletedJobs( cupsd_printer_t *p) /* I - Printer */ { cups_array_t *list; /* Array of jobs */ cupsd_job_t *job; /* Current job */ list = cupsArrayNew(compare_completed_jobs, NULL); for (job = (cupsd_job_t *)cupsArrayFirst(Jobs); job; job = (cupsd_job_t *)cupsArrayNext(Jobs)) if ((!p || !_cups_strcasecmp(p->name, job->dest)) && job->state_value >= IPP_JOB_STOPPED && job->completed_time) cupsArrayAdd(list, job); return (list); } /* * 'cupsdGetPrinterJobCount()' - Get the number of pending, processing, * or held jobs in a printer or class. */ int /* O - Job count */ cupsdGetPrinterJobCount( const char *dest) /* I - Printer or class name */ { int count; /* Job count */ cupsd_job_t *job; /* Current job */ for (job = (cupsd_job_t *)cupsArrayFirst(ActiveJobs), count = 0; job; job = (cupsd_job_t *)cupsArrayNext(ActiveJobs)) if (job->dest && !_cups_strcasecmp(job->dest, dest)) count ++; return (count); } /* * 'cupsdGetUserJobCount()' - Get the number of pending, processing, * or held jobs for a user. */ int /* O - Job count */ cupsdGetUserJobCount( const char *username) /* I - Username */ { int count; /* Job count */ cupsd_job_t *job; /* Current job */ for (job = (cupsd_job_t *)cupsArrayFirst(ActiveJobs), count = 0; job; job = (cupsd_job_t *)cupsArrayNext(ActiveJobs)) if (!_cups_strcasecmp(job->username, username)) count ++; return (count); } /* * 'cupsdLoadAllJobs()' - Load all jobs from disk. */ void cupsdLoadAllJobs(void) { char filename[1024]; /* Full filename of job.cache file */ struct stat fileinfo, /* Information on job.cache file */ dirinfo; /* Information on RequestRoot dir */ /* * Create the job arrays as needed... */ if (!Jobs) Jobs = cupsArrayNew(compare_jobs, NULL); if (!ActiveJobs) ActiveJobs = cupsArrayNew(compare_active_jobs, NULL); if (!PrintingJobs) PrintingJobs = cupsArrayNew(compare_jobs, NULL); /* * See whether the job.cache file is older than the RequestRoot directory... */ snprintf(filename, sizeof(filename), "%s/job.cache", CacheDir); if (stat(filename, &fileinfo)) { fileinfo.st_mtime = 0; if (errno != ENOENT) cupsdLogMessage(CUPSD_LOG_ERROR, "Unable to get file information for \"%s\" - %s", filename, strerror(errno)); } if (stat(RequestRoot, &dirinfo)) { dirinfo.st_mtime = 0; if (errno != ENOENT) cupsdLogMessage(CUPSD_LOG_ERROR, "Unable to get directory information for \"%s\" - %s", RequestRoot, strerror(errno)); } /* * Load the most recent source for job data... */ if (dirinfo.st_mtime > fileinfo.st_mtime) { load_request_root(); load_next_job_id(filename); } else load_job_cache(filename); /* * Clean out old jobs as needed... */ if (MaxJobs > 0 && cupsArrayCount(Jobs) >= MaxJobs) cupsdCleanJobs(); } /* * 'cupsdLoadJob()' - Load a single job. */ int /* O - 1 on success, 0 on failure */ cupsdLoadJob(cupsd_job_t *job) /* I - Job */ { int i; /* Looping var */ char jobfile[1024]; /* Job filename */ cups_file_t *fp; /* Job file */ int fileid; /* Current file ID */ ipp_attribute_t *attr; /* Job attribute */ const char *dest; /* Destination name */ cupsd_printer_t *destptr; /* Pointer to destination */ mime_type_t **filetypes; /* New filetypes array */ int *compressions; /* New compressions array */ if (job->attrs) { if (job->state_value > IPP_JOB_STOPPED) job->access_time = time(NULL); return (1); } if ((job->attrs = ippNew()) == NULL) { cupsdLogJob(job, CUPSD_LOG_ERROR, "Ran out of memory for job attributes."); return (0); } /* * Load job attributes... */ cupsdLogJob(job, CUPSD_LOG_DEBUG, "Loading attributes..."); snprintf(jobfile, sizeof(jobfile), "%s/c%05d", RequestRoot, job->id); if ((fp = cupsdOpenConfFile(jobfile)) == NULL) goto error; if (ippReadIO(fp, (ipp_iocb_t)cupsFileRead, 1, NULL, job->attrs) != IPP_DATA) { cupsdLogJob(job, CUPSD_LOG_ERROR, "Unable to read job control file \"%s\".", jobfile); cupsFileClose(fp); goto error; } cupsFileClose(fp); /* * Copy attribute data to the job object... */ if (!ippFindAttribute(job->attrs, "time-at-creation", IPP_TAG_INTEGER)) { cupsdLogJob(job, CUPSD_LOG_ERROR, "Missing or bad time-at-creation attribute in control file."); goto error; } if ((job->state = ippFindAttribute(job->attrs, "job-state", IPP_TAG_ENUM)) == NULL) { cupsdLogJob(job, CUPSD_LOG_ERROR, "Missing or bad job-state attribute in control file."); goto error; } job->state_value = (ipp_jstate_t)job->state->values[0].integer; job->file_time = 0; job->history_time = 0; if ((attr = ippFindAttribute(job->attrs, "time-at-creation", IPP_TAG_INTEGER)) != NULL) job->creation_time = attr->values[0].integer; if (job->state_value >= IPP_JOB_CANCELED && (attr = ippFindAttribute(job->attrs, "time-at-completed", IPP_TAG_INTEGER)) != NULL) { job->completed_time = attr->values[0].integer; if (JobHistory < INT_MAX) job->history_time = attr->values[0].integer + JobHistory; else job->history_time = INT_MAX; if (job->history_time < time(NULL)) goto error; /* Expired, remove from history */ if (job->history_time < JobHistoryUpdate || !JobHistoryUpdate) JobHistoryUpdate = job->history_time; if (JobFiles < INT_MAX) job->file_time = attr->values[0].integer + JobFiles; else job->file_time = INT_MAX; if (job->file_time < JobHistoryUpdate || !JobHistoryUpdate) JobHistoryUpdate = job->file_time; cupsdLogMessage(CUPSD_LOG_DEBUG2, "cupsdLoadJob: JobHistoryUpdate=%ld", (long)JobHistoryUpdate); } if (!job->dest) { if ((attr = ippFindAttribute(job->attrs, "job-printer-uri", IPP_TAG_URI)) == NULL) { cupsdLogJob(job, CUPSD_LOG_ERROR, "No job-printer-uri attribute in control file."); goto error; } if ((dest = cupsdValidateDest(attr->values[0].string.text, &(job->dtype), &destptr)) == NULL) { cupsdLogJob(job, CUPSD_LOG_ERROR, "Unable to queue job for destination \"%s\".", attr->values[0].string.text); goto error; } cupsdSetString(&job->dest, dest); } else if ((destptr = cupsdFindDest(job->dest)) == NULL) { cupsdLogJob(job, CUPSD_LOG_ERROR, "Unable to queue job for destination \"%s\".", job->dest); goto error; } if ((job->reasons = ippFindAttribute(job->attrs, "job-state-reasons", IPP_TAG_KEYWORD)) == NULL) { const char *reason; /* job-state-reason keyword */ cupsdLogJob(job, CUPSD_LOG_DEBUG, "Adding missing job-state-reasons attribute to control file."); switch (job->state_value) { default : case IPP_JOB_PENDING : if (destptr->state == IPP_PRINTER_STOPPED) reason = "printer-stopped"; else reason = "none"; break; case IPP_JOB_HELD : if ((attr = ippFindAttribute(job->attrs, "job-hold-until", IPP_TAG_ZERO)) != NULL && (attr->value_tag == IPP_TAG_NAME || attr->value_tag == IPP_TAG_NAMELANG || attr->value_tag == IPP_TAG_KEYWORD) && strcmp(attr->values[0].string.text, "no-hold")) reason = "job-hold-until-specified"; else reason = "job-incoming"; break; case IPP_JOB_PROCESSING : reason = "job-printing"; break; case IPP_JOB_STOPPED : reason = "job-stopped"; break; case IPP_JOB_CANCELED : reason = "job-canceled-by-user"; break; case IPP_JOB_ABORTED : reason = "aborted-by-system"; break; case IPP_JOB_COMPLETED : reason = "job-completed-successfully"; break; } job->reasons = ippAddString(job->attrs, IPP_TAG_JOB, IPP_TAG_KEYWORD, "job-state-reasons", NULL, reason); } else if (job->state_value == IPP_JOB_PENDING) { if (destptr->state == IPP_PRINTER_STOPPED) ippSetString(job->attrs, &job->reasons, 0, "printer-stopped"); else ippSetString(job->attrs, &job->reasons, 0, "none"); } job->sheets = ippFindAttribute(job->attrs, "job-media-sheets-completed", IPP_TAG_INTEGER); job->job_sheets = ippFindAttribute(job->attrs, "job-sheets", IPP_TAG_NAME); if (!job->priority) { if ((attr = ippFindAttribute(job->attrs, "job-priority", IPP_TAG_INTEGER)) == NULL) { cupsdLogJob(job, CUPSD_LOG_ERROR, "Missing or bad job-priority attribute in control file."); goto error; } job->priority = attr->values[0].integer; } if (!job->username) { if ((attr = ippFindAttribute(job->attrs, "job-originating-user-name", IPP_TAG_NAME)) == NULL) { cupsdLogJob(job, CUPSD_LOG_ERROR, "Missing or bad job-originating-user-name " "attribute in control file."); goto error; } cupsdSetString(&job->username, attr->values[0].string.text); } if (!job->name) { if ((attr = ippFindAttribute(job->attrs, "job-name", IPP_TAG_NAME)) != NULL) cupsdSetString(&job->name, attr->values[0].string.text); } /* * Set the job hold-until time and state... */ if (job->state_value == IPP_JOB_HELD) { if ((attr = ippFindAttribute(job->attrs, "job-hold-until", IPP_TAG_KEYWORD)) == NULL) attr = ippFindAttribute(job->attrs, "job-hold-until", IPP_TAG_NAME); if (attr) cupsdSetJobHoldUntil(job, attr->values[0].string.text, CUPSD_JOB_DEFAULT); else { job->state->values[0].integer = IPP_JOB_PENDING; job->state_value = IPP_JOB_PENDING; } } else if (job->state_value == IPP_JOB_PROCESSING) { job->state->values[0].integer = IPP_JOB_PENDING; job->state_value = IPP_JOB_PENDING; } if ((attr = ippFindAttribute(job->attrs, "job-k-octets", IPP_TAG_INTEGER)) != NULL) job->koctets = attr->values[0].integer; if (!job->num_files) { /* * Find all the d##### files... */ for (fileid = 1; fileid < 10000; fileid ++) { snprintf(jobfile, sizeof(jobfile), "%s/d%05d-%03d", RequestRoot, job->id, fileid); if (access(jobfile, 0)) break; cupsdLogJob(job, CUPSD_LOG_DEBUG, "Auto-typing document file \"%s\"...", jobfile); if (fileid > job->num_files) { if (job->num_files == 0) { compressions = (int *)calloc((size_t)fileid, sizeof(int)); filetypes = (mime_type_t **)calloc((size_t)fileid, sizeof(mime_type_t *)); } else { compressions = (int *)realloc(job->compressions, sizeof(int) * (size_t)fileid); filetypes = (mime_type_t **)realloc(job->filetypes, sizeof(mime_type_t *) * (size_t)fileid); } if (compressions) job->compressions = compressions; if (filetypes) job->filetypes = filetypes; if (!compressions || !filetypes) { cupsdLogJob(job, CUPSD_LOG_ERROR, "Ran out of memory for job file types."); ippDelete(job->attrs); job->attrs = NULL; if (job->compressions) { free(job->compressions); job->compressions = NULL; } if (job->filetypes) { free(job->filetypes); job->filetypes = NULL; } job->num_files = 0; return (0); } job->num_files = fileid; } job->filetypes[fileid - 1] = mimeFileType(MimeDatabase, jobfile, NULL, job->compressions + fileid - 1); if (!job->filetypes[fileid - 1]) job->filetypes[fileid - 1] = mimeType(MimeDatabase, "application", "vnd.cups-raw"); } } /* * Load authentication information as needed... */ if (job->state_value < IPP_JOB_STOPPED) { snprintf(jobfile, sizeof(jobfile), "%s/a%05d", RequestRoot, job->id); for (i = 0; i < (int)(sizeof(job->auth_env) / sizeof(job->auth_env[0])); i ++) cupsdClearString(job->auth_env + i); cupsdClearString(&job->auth_uid); if ((fp = cupsFileOpen(jobfile, "r")) != NULL) { int bytes, /* Size of auth data */ linenum = 1; /* Current line number */ char line[65536], /* Line from file */ *value, /* Value from line */ data[65536]; /* Decoded data */ if (cupsFileGets(fp, line, sizeof(line)) && !strcmp(line, "CUPSD-AUTH-V3")) { i = 0; while (cupsFileGetConf(fp, line, sizeof(line), &value, &linenum)) { /* * Decode value... */ if (strcmp(line, "negotiate") && strcmp(line, "uid")) { bytes = sizeof(data); httpDecode64_2(data, &bytes, value); } /* * Assign environment variables... */ if (!strcmp(line, "uid")) { cupsdSetStringf(&job->auth_uid, "AUTH_UID=%s", value); continue; } else if (i >= (int)(sizeof(job->auth_env) / sizeof(job->auth_env[0]))) break; if (!strcmp(line, "username")) cupsdSetStringf(job->auth_env + i, "AUTH_USERNAME=%s", data); else if (!strcmp(line, "domain")) cupsdSetStringf(job->auth_env + i, "AUTH_DOMAIN=%s", data); else if (!strcmp(line, "password")) cupsdSetStringf(job->auth_env + i, "AUTH_PASSWORD=%s", data); else if (!strcmp(line, "negotiate")) cupsdSetStringf(job->auth_env + i, "AUTH_NEGOTIATE=%s", value); else continue; i ++; } } cupsFileClose(fp); } } job->access_time = time(NULL); return (1); /* * If we get here then something bad happened... */ error: ippDelete(job->attrs); job->attrs = NULL; remove_job_history(job); remove_job_files(job); return (0); } /* * 'cupsdMoveJob()' - Move the specified job to a different destination. */ void cupsdMoveJob(cupsd_job_t *job, /* I - Job */ cupsd_printer_t *p) /* I - Destination printer or class */ { ipp_attribute_t *attr; /* job-printer-uri attribute */ const char *olddest; /* Old destination */ cupsd_printer_t *oldp; /* Old pointer */ /* * Don't move completed jobs... */ if (job->state_value > IPP_JOB_STOPPED) return; /* * Get the old destination... */ olddest = job->dest; if (job->printer) oldp = job->printer; else oldp = cupsdFindDest(olddest); /* * Change the destination information... */ if (job->state_value > IPP_JOB_HELD) cupsdSetJobState(job, IPP_JOB_PENDING, CUPSD_JOB_DEFAULT, "Stopping job prior to move."); cupsdAddEvent(CUPSD_EVENT_JOB_CONFIG_CHANGED, oldp, job, "Job #%d moved from %s to %s.", job->id, olddest, p->name); cupsdSetString(&job->dest, p->name); job->dtype = p->type & (CUPS_PRINTER_CLASS | CUPS_PRINTER_REMOTE); if ((attr = ippFindAttribute(job->attrs, "job-printer-uri", IPP_TAG_URI)) != NULL) cupsdSetString(&(attr->values[0].string.text), p->uri); cupsdAddEvent(CUPSD_EVENT_JOB_STOPPED, p, job, "Job #%d moved from %s to %s.", job->id, olddest, p->name); job->dirty = 1; cupsdMarkDirty(CUPSD_DIRTY_JOBS); } /* * 'cupsdReleaseJob()' - Release the specified job. */ void cupsdReleaseJob(cupsd_job_t *job) /* I - Job */ { cupsdLogMessage(CUPSD_LOG_DEBUG2, "cupsdReleaseJob(job=%p(%d))", job, job->id); if (job->state_value == IPP_JOB_HELD) { /* * Add trailing banner as needed... */ if (job->pending_timeout) cupsdTimeoutJob(job); cupsdSetJobState(job, IPP_JOB_PENDING, CUPSD_JOB_DEFAULT, "Job released by user."); } } /* * 'cupsdRestartJob()' - Restart the specified job. */ void cupsdRestartJob(cupsd_job_t *job) /* I - Job */ { cupsdLogMessage(CUPSD_LOG_DEBUG2, "cupsdRestartJob(job=%p(%d))", job, job->id); if (job->state_value == IPP_JOB_STOPPED || job->num_files) cupsdSetJobState(job, IPP_JOB_PENDING, CUPSD_JOB_DEFAULT, "Job restarted by user."); } /* * 'cupsdSaveAllJobs()' - Save a summary of all jobs to disk. */ void cupsdSaveAllJobs(void) { int i; /* Looping var */ cups_file_t *fp; /* job.cache file */ char filename[1024], /* job.cache filename */ temp[1024]; /* Temporary string */ cupsd_job_t *job; /* Current job */ time_t curtime; /* Current time */ struct tm *curdate; /* Current date */ snprintf(filename, sizeof(filename), "%s/job.cache", CacheDir); if ((fp = cupsdCreateConfFile(filename, ConfigFilePerm)) == NULL) return; cupsdLogMessage(CUPSD_LOG_INFO, "Saving job.cache..."); /* * Write a small header to the file... */ curtime = time(NULL); curdate = localtime(&curtime); strftime(temp, sizeof(temp) - 1, "%Y-%m-%d %H:%M", curdate); cupsFilePuts(fp, "# Job cache file for " CUPS_SVERSION "\n"); cupsFilePrintf(fp, "# Written by cupsd on %s\n", temp); cupsFilePrintf(fp, "NextJobId %d\n", NextJobId); /* * Write each job known to the system... */ for (job = (cupsd_job_t *)cupsArrayFirst(Jobs); job; job = (cupsd_job_t *)cupsArrayNext(Jobs)) { cupsFilePrintf(fp, "\n", job->id); cupsFilePrintf(fp, "State %d\n", job->state_value); cupsFilePrintf(fp, "Created %ld\n", (long)job->creation_time); if (job->completed_time) cupsFilePrintf(fp, "Completed %ld\n", (long)job->completed_time); cupsFilePrintf(fp, "Priority %d\n", job->priority); if (job->hold_until) cupsFilePrintf(fp, "HoldUntil %ld\n", (long)job->hold_until); cupsFilePrintf(fp, "Username %s\n", job->username); if (job->name) cupsFilePutConf(fp, "Name", job->name); cupsFilePrintf(fp, "Destination %s\n", job->dest); cupsFilePrintf(fp, "DestType %d\n", job->dtype); cupsFilePrintf(fp, "KOctets %d\n", job->koctets); cupsFilePrintf(fp, "NumFiles %d\n", job->num_files); for (i = 0; i < job->num_files; i ++) cupsFilePrintf(fp, "File %d %s/%s %d\n", i + 1, job->filetypes[i]->super, job->filetypes[i]->type, job->compressions[i]); cupsFilePuts(fp, "\n"); } cupsdCloseCreatedConfFile(fp, filename); } /* * 'cupsdSaveJob()' - Save a job to disk. */ void cupsdSaveJob(cupsd_job_t *job) /* I - Job */ { char filename[1024]; /* Job control filename */ cups_file_t *fp; /* Job file */ cupsdLogMessage(CUPSD_LOG_DEBUG2, "cupsdSaveJob(job=%p(%d)): job->attrs=%p", job, job->id, job->attrs); snprintf(filename, sizeof(filename), "%s/c%05d", RequestRoot, job->id); if ((fp = cupsdCreateConfFile(filename, ConfigFilePerm & 0600)) == NULL) return; fchown(cupsFileNumber(fp), RunUser, Group); job->attrs->state = IPP_IDLE; if (ippWriteIO(fp, (ipp_iocb_t)cupsFileWrite, 1, NULL, job->attrs) != IPP_DATA) { cupsdLogJob(job, CUPSD_LOG_ERROR, "Unable to write job control file."); cupsFileClose(fp); return; } if (!cupsdCloseCreatedConfFile(fp, filename)) { /* * Remove backup file and mark this job as clean... */ strlcat(filename, ".O", sizeof(filename)); unlink(filename); job->dirty = 0; } } /* * 'cupsdSetJobHoldUntil()' - Set the hold time for a job. */ void cupsdSetJobHoldUntil(cupsd_job_t *job, /* I - Job */ const char *when, /* I - When to resume */ int update)/* I - Update job-hold-until attr? */ { time_t curtime; /* Current time */ struct tm *curdate; /* Current date */ int hour; /* Hold hour */ int minute; /* Hold minute */ int second = 0; /* Hold second */ cupsdLogMessage(CUPSD_LOG_DEBUG2, "cupsdSetJobHoldUntil(job=%p(%d), when=\"%s\", update=%d)", job, job->id, when, update); if (update) { /* * Update the job-hold-until attribute... */ ipp_attribute_t *attr; /* job-hold-until attribute */ if ((attr = ippFindAttribute(job->attrs, "job-hold-until", IPP_TAG_KEYWORD)) == NULL) attr = ippFindAttribute(job->attrs, "job-hold-until", IPP_TAG_NAME); if (attr) cupsdSetString(&(attr->values[0].string.text), when); else attr = ippAddString(job->attrs, IPP_TAG_JOB, IPP_TAG_KEYWORD, "job-hold-until", NULL, when); if (attr) { if (isdigit(when[0] & 255)) attr->value_tag = IPP_TAG_NAME; else attr->value_tag = IPP_TAG_KEYWORD; job->dirty = 1; cupsdMarkDirty(CUPSD_DIRTY_JOBS); } } ippSetString(job->attrs, &job->reasons, 0, "job-hold-until-specified"); /* * Update the hold time... */ job->cancel_time = 0; if (!strcmp(when, "indefinite") || !strcmp(when, "auth-info-required")) { /* * Hold indefinitely... */ job->hold_until = 0; if (MaxHoldTime > 0) job->cancel_time = time(NULL) + MaxHoldTime; } else if (!strcmp(when, "day-time")) { /* * Hold to 6am the next morning unless local time is < 6pm. */ curtime = time(NULL); curdate = localtime(&curtime); if (curdate->tm_hour < 18) job->hold_until = curtime; else job->hold_until = curtime + ((29 - curdate->tm_hour) * 60 + 59 - curdate->tm_min) * 60 + 60 - curdate->tm_sec; } else if (!strcmp(when, "evening") || !strcmp(when, "night")) { /* * Hold to 6pm unless local time is > 6pm or < 6am. */ curtime = time(NULL); curdate = localtime(&curtime); if (curdate->tm_hour < 6 || curdate->tm_hour >= 18) job->hold_until = curtime; else job->hold_until = curtime + ((17 - curdate->tm_hour) * 60 + 59 - curdate->tm_min) * 60 + 60 - curdate->tm_sec; } else if (!strcmp(when, "second-shift")) { /* * Hold to 4pm unless local time is > 4pm. */ curtime = time(NULL); curdate = localtime(&curtime); if (curdate->tm_hour >= 16) job->hold_until = curtime; else job->hold_until = curtime + ((15 - curdate->tm_hour) * 60 + 59 - curdate->tm_min) * 60 + 60 - curdate->tm_sec; } else if (!strcmp(when, "third-shift")) { /* * Hold to 12am unless local time is < 8am. */ curtime = time(NULL); curdate = localtime(&curtime); if (curdate->tm_hour < 8) job->hold_until = curtime; else job->hold_until = curtime + ((23 - curdate->tm_hour) * 60 + 59 - curdate->tm_min) * 60 + 60 - curdate->tm_sec; } else if (!strcmp(when, "weekend")) { /* * Hold to weekend unless we are in the weekend. */ curtime = time(NULL); curdate = localtime(&curtime); if (curdate->tm_wday == 0 || curdate->tm_wday == 6) job->hold_until = curtime; else job->hold_until = curtime + (((5 - curdate->tm_wday) * 24 + (17 - curdate->tm_hour)) * 60 + 59 - curdate->tm_min) * 60 + 60 - curdate->tm_sec; } else if (sscanf(when, "%d:%d:%d", &hour, &minute, &second) >= 2) { /* * Hold to specified GMT time (HH:MM or HH:MM:SS)... */ curtime = time(NULL); curdate = gmtime(&curtime); job->hold_until = curtime + ((hour - curdate->tm_hour) * 60 + minute - curdate->tm_min) * 60 + second - curdate->tm_sec; /* * Hold until next day as needed... */ if (job->hold_until < curtime) job->hold_until += 24 * 60 * 60; } cupsdLogMessage(CUPSD_LOG_DEBUG2, "cupsdSetJobHoldUntil: hold_until=%d", (int)job->hold_until); } /* * 'cupsdSetJobPriority()' - Set the priority of a job, moving it up/down in * the list as needed. */ void cupsdSetJobPriority( cupsd_job_t *job, /* I - Job ID */ int priority) /* I - New priority (0 to 100) */ { ipp_attribute_t *attr; /* Job attribute */ /* * Don't change completed jobs... */ if (job->state_value >= IPP_JOB_PROCESSING) return; /* * Set the new priority and re-add the job into the active list... */ cupsArrayRemove(ActiveJobs, job); job->priority = priority; if ((attr = ippFindAttribute(job->attrs, "job-priority", IPP_TAG_INTEGER)) != NULL) attr->values[0].integer = priority; else ippAddInteger(job->attrs, IPP_TAG_JOB, IPP_TAG_INTEGER, "job-priority", priority); cupsArrayAdd(ActiveJobs, job); job->dirty = 1; cupsdMarkDirty(CUPSD_DIRTY_JOBS); } /* * 'cupsdSetJobState()' - Set the state of the specified print job. */ void cupsdSetJobState( cupsd_job_t *job, /* I - Job to cancel */ ipp_jstate_t newstate, /* I - New job state */ cupsd_jobaction_t action, /* I - Action to take */ const char *message, /* I - Message to log */ ...) /* I - Additional arguments as needed */ { int i; /* Looping var */ ipp_jstate_t oldstate; /* Old state */ char filename[1024]; /* Job filename */ ipp_attribute_t *attr; /* Job attribute */ cupsdLogMessage(CUPSD_LOG_DEBUG2, "cupsdSetJobState(job=%p(%d), state=%d, newstate=%d, " "action=%d, message=\"%s\")", job, job->id, job->state_value, newstate, action, message ? message : "(null)"); /* * Make sure we have the job attributes... */ if (!cupsdLoadJob(job)) return; /* * Don't do anything if the state is unchanged and we aren't purging the * job... */ oldstate = job->state_value; if (newstate == oldstate && action != CUPSD_JOB_PURGE) return; /* * Stop any processes that are working on the current job... */ if (oldstate == IPP_JOB_PROCESSING) stop_job(job, action); /* * Set the new job state... */ job->state_value = newstate; if (job->state) job->state->values[0].integer = newstate; switch (newstate) { case IPP_JOB_PENDING : /* * Update job-hold-until as needed... */ if ((attr = ippFindAttribute(job->attrs, "job-hold-until", IPP_TAG_KEYWORD)) == NULL) attr = ippFindAttribute(job->attrs, "job-hold-until", IPP_TAG_NAME); if (attr) { attr->value_tag = IPP_TAG_KEYWORD; cupsdSetString(&(attr->values[0].string.text), "no-hold"); } default : break; case IPP_JOB_ABORTED : case IPP_JOB_CANCELED : case IPP_JOB_COMPLETED : set_time(job, "time-at-completed"); ippSetString(job->attrs, &job->reasons, 0, "processing-to-stop-point"); break; } /* * Log message as needed... */ if (message) { char buffer[2048]; /* Message buffer */ va_list ap; /* Pointer to additional arguments */ va_start(ap, message); vsnprintf(buffer, sizeof(buffer), message, ap); va_end(ap); if (newstate > IPP_JOB_STOPPED) cupsdAddEvent(CUPSD_EVENT_JOB_COMPLETED, job->printer, job, "%s", buffer); else cupsdAddEvent(CUPSD_EVENT_JOB_STATE, job->printer, job, "%s", buffer); if (newstate == IPP_JOB_STOPPED || newstate == IPP_JOB_ABORTED) cupsdLogJob(job, CUPSD_LOG_ERROR, "%s", buffer); else cupsdLogJob(job, CUPSD_LOG_INFO, "%s", buffer); } /* * Handle post-state-change actions... */ switch (newstate) { case IPP_JOB_PROCESSING : /* * Add the job to the "printing" list... */ if (!cupsArrayFind(PrintingJobs, job)) cupsArrayAdd(PrintingJobs, job); /* * Set the processing time... */ set_time(job, "time-at-processing"); case IPP_JOB_PENDING : case IPP_JOB_HELD : case IPP_JOB_STOPPED : /* * Make sure the job is in the active list... */ if (!cupsArrayFind(ActiveJobs, job)) cupsArrayAdd(ActiveJobs, job); /* * Save the job state to disk... */ job->dirty = 1; cupsdMarkDirty(CUPSD_DIRTY_JOBS); break; case IPP_JOB_ABORTED : case IPP_JOB_CANCELED : case IPP_JOB_COMPLETED : if (newstate == IPP_JOB_CANCELED) { /* * Remove the job from the active list if there are no processes still * running for it... */ for (i = 0; job->filters[i] < 0; i++); if (!job->filters[i] && job->backend <= 0) cupsArrayRemove(ActiveJobs, job); } else { /* * Otherwise just remove the job from the active list immediately... */ cupsArrayRemove(ActiveJobs, job); } /* * Expire job subscriptions since the job is now "completed"... */ cupsdExpireSubscriptions(NULL, job); #ifdef __APPLE__ /* * If we are going to sleep and the PrintingJobs count is now 0, allow the * sleep to happen immediately... */ if (Sleeping && cupsArrayCount(PrintingJobs) == 0) cupsdAllowSleep(); #endif /* __APPLE__ */ /* * Remove any authentication data... */ snprintf(filename, sizeof(filename), "%s/a%05d", RequestRoot, job->id); if (cupsdRemoveFile(filename) && errno != ENOENT) cupsdLogMessage(CUPSD_LOG_ERROR, "Unable to remove authentication cache: %s", strerror(errno)); for (i = 0; i < (int)(sizeof(job->auth_env) / sizeof(job->auth_env[0])); i ++) cupsdClearString(job->auth_env + i); cupsdClearString(&job->auth_uid); /* * Remove the print file for good if we aren't preserving jobs or * files... */ if (!JobHistory || !JobFiles || action == CUPSD_JOB_PURGE) remove_job_files(job); if (JobHistory && action != CUPSD_JOB_PURGE) { /* * Save job state info... */ job->dirty = 1; cupsdMarkDirty(CUPSD_DIRTY_JOBS); } else if (!job->printer) { /* * Delete the job immediately if not actively printing... */ cupsdDeleteJob(job, CUPSD_JOB_PURGE); job = NULL; } break; } /* * Finalize the job immediately if we forced things... */ if (action >= CUPSD_JOB_FORCE && job && job->printer) finalize_job(job, 0); /* * Update the server "busy" state... */ cupsdSetBusyState(); } /* * 'cupsdStopAllJobs()' - Stop all print jobs. */ void cupsdStopAllJobs( cupsd_jobaction_t action, /* I - Action */ int kill_delay) /* I - Number of seconds before we kill */ { cupsd_job_t *job; /* Current job */ DEBUG_puts("cupsdStopAllJobs()"); for (job = (cupsd_job_t *)cupsArrayFirst(PrintingJobs); job; job = (cupsd_job_t *)cupsArrayNext(PrintingJobs)) { if (job->completed) { cupsdSetJobState(job, IPP_JOB_COMPLETED, CUPSD_JOB_FORCE, NULL); } else { if (kill_delay) job->kill_time = time(NULL) + kill_delay; cupsdSetJobState(job, IPP_JOB_PENDING, action, NULL); } } } /* * 'cupsdUnloadCompletedJobs()' - Flush completed job history from memory. */ void cupsdUnloadCompletedJobs(void) { cupsd_job_t *job; /* Current job */ time_t expire; /* Expiration time */ expire = time(NULL) - 60; for (job = (cupsd_job_t *)cupsArrayFirst(Jobs); job; job = (cupsd_job_t *)cupsArrayNext(Jobs)) if (job->attrs && job->state_value >= IPP_JOB_STOPPED && !job->printer && job->access_time < expire) { if (job->dirty) cupsdSaveJob(job); unload_job(job); } } /* * 'cupsdUpdateJobs()' - Update the history/file files for all jobs. */ void cupsdUpdateJobs(void) { cupsd_job_t *job; /* Current job */ time_t curtime; /* Current time */ ipp_attribute_t *attr; /* time-at-completed attribute */ curtime = time(NULL); JobHistoryUpdate = 0; for (job = (cupsd_job_t *)cupsArrayFirst(Jobs); job; job = (cupsd_job_t *)cupsArrayNext(Jobs)) { if (job->state_value >= IPP_JOB_CANCELED && (attr = ippFindAttribute(job->attrs, "time-at-completed", IPP_TAG_INTEGER)) != NULL) { /* * Update history/file expiration times... */ if (JobHistory < INT_MAX) job->history_time = attr->values[0].integer + JobHistory; else job->history_time = INT_MAX; if (job->history_time < curtime) { cupsdDeleteJob(job, CUPSD_JOB_PURGE); continue; } if (job->history_time < JobHistoryUpdate || !JobHistoryUpdate) JobHistoryUpdate = job->history_time; if (JobFiles < INT_MAX) job->file_time = attr->values[0].integer + JobFiles; else job->file_time = INT_MAX; if (job->file_time < JobHistoryUpdate || !JobHistoryUpdate) JobHistoryUpdate = job->file_time; } } cupsdLogMessage(CUPSD_LOG_DEBUG2, "cupsdUpdateAllJobs: JobHistoryUpdate=%ld", (long)JobHistoryUpdate); } /* * 'compare_active_jobs()' - Compare the job IDs and priorities of two jobs. */ static int /* O - Difference */ compare_active_jobs(void *first, /* I - First job */ void *second, /* I - Second job */ void *data) /* I - App data (not used) */ { int diff; /* Difference */ (void)data; if ((diff = ((cupsd_job_t *)second)->priority - ((cupsd_job_t *)first)->priority) != 0) return (diff); else return (((cupsd_job_t *)first)->id - ((cupsd_job_t *)second)->id); } /* * 'compare_completed_jobs()' - Compare the job IDs and completion times of two jobs. */ static int /* O - Difference */ compare_completed_jobs(void *first, /* I - First job */ void *second, /* I - Second job */ void *data) /* I - App data (not used) */ { int diff; /* Difference */ (void)data; if ((diff = ((cupsd_job_t *)second)->completed_time - ((cupsd_job_t *)first)->completed_time) != 0) return (diff); else return (((cupsd_job_t *)first)->id - ((cupsd_job_t *)second)->id); } /* * 'compare_jobs()' - Compare the job IDs of two jobs. */ static int /* O - Difference */ compare_jobs(void *first, /* I - First job */ void *second, /* I - Second job */ void *data) /* I - App data (not used) */ { (void)data; return (((cupsd_job_t *)first)->id - ((cupsd_job_t *)second)->id); } /* * 'dump_job_history()' - Dump any debug messages for a job. */ static void dump_job_history(cupsd_job_t *job) /* I - Job */ { int i, /* Looping var */ oldsize; /* Current MaxLogSize */ struct tm *date; /* Date/time value */ cupsd_joblog_t *message; /* Current message */ char temp[2048], /* Log message */ *ptr, /* Pointer into log message */ start[256], /* Start time */ end[256]; /* End time */ cupsd_printer_t *printer; /* Printer for job */ /* * See if we have anything to dump... */ if (!job->history) return; /* * Disable log rotation temporarily... */ oldsize = MaxLogSize; MaxLogSize = 0; /* * Copy the debug messages to the log... */ message = (cupsd_joblog_t *)cupsArrayFirst(job->history); date = localtime(&(message->time)); strftime(start, sizeof(start), "%X", date); message = (cupsd_joblog_t *)cupsArrayLast(job->history); date = localtime(&(message->time)); strftime(end, sizeof(end), "%X", date); snprintf(temp, sizeof(temp), "[Job %d] The following messages were recorded from %s to %s", job->id, start, end); cupsdWriteErrorLog(CUPSD_LOG_DEBUG, temp); for (message = (cupsd_joblog_t *)cupsArrayFirst(job->history); message; message = (cupsd_joblog_t *)cupsArrayNext(job->history)) cupsdWriteErrorLog(CUPSD_LOG_DEBUG, message->message); snprintf(temp, sizeof(temp), "[Job %d] End of messages", job->id); cupsdWriteErrorLog(CUPSD_LOG_DEBUG, temp); /* * Log the printer state values... */ if ((printer = job->printer) == NULL) printer = cupsdFindDest(job->dest); if (printer) { snprintf(temp, sizeof(temp), "[Job %d] printer-state=%d(%s)", job->id, printer->state, printer->state == IPP_PRINTER_IDLE ? "idle" : printer->state == IPP_PRINTER_PROCESSING ? "processing" : "stopped"); cupsdWriteErrorLog(CUPSD_LOG_DEBUG, temp); snprintf(temp, sizeof(temp), "[Job %d] printer-state-message=\"%s\"", job->id, printer->state_message); cupsdWriteErrorLog(CUPSD_LOG_DEBUG, temp); snprintf(temp, sizeof(temp), "[Job %d] printer-state-reasons=", job->id); ptr = temp + strlen(temp); if (printer->num_reasons == 0) strlcpy(ptr, "none", sizeof(temp) - (size_t)(ptr - temp)); else { for (i = 0; i < printer->num_reasons && ptr < (temp + sizeof(temp) - 2); i ++) { if (i) *ptr++ = ','; strlcpy(ptr, printer->reasons[i], sizeof(temp) - (size_t)(ptr - temp)); ptr += strlen(ptr); } } cupsdWriteErrorLog(CUPSD_LOG_DEBUG, temp); } /* * Restore log file rotation... */ MaxLogSize = oldsize; /* * Free all messages... */ free_job_history(job); } /* * 'free_job_history()' - Free any log history. */ static void free_job_history(cupsd_job_t *job) /* I - Job */ { char *message; /* Current message */ if (!job->history) return; for (message = (char *)cupsArrayFirst(job->history); message; message = (char *)cupsArrayNext(job->history)) free(message); cupsArrayDelete(job->history); job->history = NULL; } /* * 'finalize_job()' - Cleanup after job filter processes and support data. */ static void finalize_job(cupsd_job_t *job, /* I - Job */ int set_job_state) /* I - 1 = set the job state */ { ipp_pstate_t printer_state; /* New printer state value */ ipp_jstate_t job_state; /* New job state value */ const char *message; /* Message for job state */ char buffer[1024]; /* Buffer for formatted messages */ cupsdLogMessage(CUPSD_LOG_DEBUG2, "finalize_job(job=%p(%d))", job, job->id); /* * Clear the "connecting-to-device" and "cups-waiting-for-job-completed" * reasons, which are only valid when a printer is processing, along with any * remote printing job state... */ cupsdSetPrinterReasons(job->printer, "-connecting-to-device," "cups-waiting-for-job-completed," "cups-remote-pending," "cups-remote-pending-held," "cups-remote-processing," "cups-remote-stopped," "cups-remote-canceled," "cups-remote-aborted," "cups-remote-completed"); /* * Similarly, clear the "offline-report" reason for non-USB devices since we * rarely have current information for network devices... */ if (strncmp(job->printer->device_uri, "usb:", 4) && strncmp(job->printer->device_uri, "ippusb:", 7)) cupsdSetPrinterReasons(job->printer, "-offline-report"); /* * Free the security profile... */ cupsdDestroyProfile(job->profile); job->profile = NULL; cupsdDestroyProfile(job->bprofile); job->bprofile = NULL; /* * Clear the unresponsive job watchdog timers... */ job->cancel_time = 0; job->kill_time = 0; /* * Close pipes and status buffer... */ cupsdClosePipe(job->print_pipes); cupsdClosePipe(job->back_pipes); cupsdClosePipe(job->side_pipes); cupsdRemoveSelect(job->status_pipes[0]); cupsdClosePipe(job->status_pipes); cupsdStatBufDelete(job->status_buffer); job->status_buffer = NULL; /* * Process the exit status... */ if (job->printer->state == IPP_PRINTER_PROCESSING) printer_state = IPP_PRINTER_IDLE; else printer_state = job->printer->state; switch (job_state = job->state_value) { case IPP_JOB_PENDING : message = "Job paused."; break; case IPP_JOB_HELD : message = "Job held."; break; default : case IPP_JOB_PROCESSING : case IPP_JOB_COMPLETED : job_state = IPP_JOB_COMPLETED; message = "Job completed."; if (!job->status) ippSetString(job->attrs, &job->reasons, 0, "job-completed-successfully"); break; case IPP_JOB_STOPPED : message = "Job stopped."; ippSetString(job->attrs, &job->reasons, 0, "job-stopped"); break; case IPP_JOB_CANCELED : message = "Job canceled."; ippSetString(job->attrs, &job->reasons, 0, "job-canceled-by-user"); break; case IPP_JOB_ABORTED : message = "Job aborted."; break; } if (job->status < 0) { /* * Backend had errors... */ int exit_code; /* Exit code from backend */ /* * Convert the status to an exit code. Due to the way the W* macros are * implemented on MacOS X (bug?), we have to store the exit status in a * variable first and then convert... */ exit_code = -job->status; if (WIFEXITED(exit_code)) exit_code = WEXITSTATUS(exit_code); else { ippSetString(job->attrs, &job->reasons, 0, "cups-backend-crashed"); exit_code = job->status; } cupsdLogJob(job, CUPSD_LOG_INFO, "Backend returned status %d (%s)", exit_code, exit_code == CUPS_BACKEND_FAILED ? "failed" : exit_code == CUPS_BACKEND_AUTH_REQUIRED ? "authentication required" : exit_code == CUPS_BACKEND_HOLD ? "hold job" : exit_code == CUPS_BACKEND_STOP ? "stop printer" : exit_code == CUPS_BACKEND_CANCEL ? "cancel job" : exit_code == CUPS_BACKEND_RETRY ? "retry job later" : exit_code == CUPS_BACKEND_RETRY_CURRENT ? "retry job immediately" : exit_code < 0 ? "crashed" : "unknown"); /* * Do what needs to be done... */ switch (exit_code) { default : case CUPS_BACKEND_FAILED : /* * Backend failure, use the error-policy to determine how to * act... */ if (job->dtype & CUPS_PRINTER_CLASS) { /* * Queued on a class - mark the job as pending and we'll retry on * another printer... */ if (job_state == IPP_JOB_COMPLETED) { job_state = IPP_JOB_PENDING; message = "Retrying job on another printer."; ippSetString(job->attrs, &job->reasons, 0, "resources-are-not-ready"); } } else if (!strcmp(job->printer->error_policy, "retry-current-job")) { /* * The error policy is "retry-current-job" - mark the job as pending * and we'll retry on the same printer... */ if (job_state == IPP_JOB_COMPLETED) { job_state = IPP_JOB_PENDING; message = "Retrying job on same printer."; ippSetString(job->attrs, &job->reasons, 0, "none"); } } else if ((job->printer->type & CUPS_PRINTER_FAX) || !strcmp(job->printer->error_policy, "retry-job")) { if (job_state == IPP_JOB_COMPLETED) { /* * The job was queued on a fax or the error policy is "retry-job" - * hold the job if the number of retries is less than the * JobRetryLimit, otherwise abort the job. */ job->tries ++; if (job->tries > JobRetryLimit && JobRetryLimit > 0) { /* * Too many tries... */ snprintf(buffer, sizeof(buffer), "Job aborted after %d unsuccessful attempts.", JobRetryLimit); job_state = IPP_JOB_ABORTED; message = buffer; ippSetString(job->attrs, &job->reasons, 0, "aborted-by-system"); } else { /* * Try again in N seconds... */ snprintf(buffer, sizeof(buffer), "Job held for %d seconds since it could not be sent.", JobRetryInterval); job->hold_until = time(NULL) + JobRetryInterval; job_state = IPP_JOB_HELD; message = buffer; ippSetString(job->attrs, &job->reasons, 0, "resources-are-not-ready"); } } } else if (!strcmp(job->printer->error_policy, "abort-job") && job_state == IPP_JOB_COMPLETED) { job_state = IPP_JOB_ABORTED; message = "Job aborted due to backend errors; please consult " "the error_log file for details."; ippSetString(job->attrs, &job->reasons, 0, "aborted-by-system"); } else if (job->state_value == IPP_JOB_PROCESSING) { job_state = IPP_JOB_PENDING; printer_state = IPP_PRINTER_STOPPED; message = "Printer stopped due to backend errors; please " "consult the error_log file for details."; ippSetString(job->attrs, &job->reasons, 0, "none"); } break; case CUPS_BACKEND_CANCEL : /* * Cancel the job... */ if (job_state == IPP_JOB_COMPLETED) { job_state = IPP_JOB_CANCELED; message = "Job canceled at printer."; ippSetString(job->attrs, &job->reasons, 0, "canceled-at-device"); } break; case CUPS_BACKEND_HOLD : if (job_state == IPP_JOB_COMPLETED) { /* * Hold the job... */ const char *reason = ippGetString(job->reasons, 0, NULL); cupsdLogJob(job, CUPSD_LOG_DEBUG, "job-state-reasons=\"%s\"", reason); if (!reason || strncmp(reason, "account-", 8)) { cupsdSetJobHoldUntil(job, "indefinite", 1); ippSetString(job->attrs, &job->reasons, 0, "job-hold-until-specified"); message = "Job held indefinitely due to backend errors; please " "consult the error_log file for details."; } else if (!strcmp(reason, "account-info-needed")) { cupsdSetJobHoldUntil(job, "indefinite", 0); message = "Job held indefinitely - account information is " "required."; } else if (!strcmp(reason, "account-closed")) { cupsdSetJobHoldUntil(job, "indefinite", 0); message = "Job held indefinitely - account has been closed."; } else if (!strcmp(reason, "account-limit-reached")) { cupsdSetJobHoldUntil(job, "indefinite", 0); message = "Job held indefinitely - account limit has been " "reached."; } else { cupsdSetJobHoldUntil(job, "indefinite", 0); message = "Job held indefinitely - account authorization failed."; } job_state = IPP_JOB_HELD; } break; case CUPS_BACKEND_STOP : /* * Stop the printer... */ printer_state = IPP_PRINTER_STOPPED; message = "Printer stopped due to backend errors; please " "consult the error_log file for details."; if (job_state == IPP_JOB_COMPLETED) { job_state = IPP_JOB_PENDING; ippSetString(job->attrs, &job->reasons, 0, "resources-are-not-ready"); } break; case CUPS_BACKEND_AUTH_REQUIRED : /* * Hold the job for authentication... */ if (job_state == IPP_JOB_COMPLETED) { cupsdSetJobHoldUntil(job, "auth-info-required", 1); job_state = IPP_JOB_HELD; message = "Job held for authentication."; if (strncmp(job->reasons->values[0].string.text, "account-", 8)) ippSetString(job->attrs, &job->reasons, 0, "cups-held-for-authentication"); } break; case CUPS_BACKEND_RETRY : if (job_state == IPP_JOB_COMPLETED) { /* * Hold the job if the number of retries is less than the * JobRetryLimit, otherwise abort the job. */ job->tries ++; if (job->tries > JobRetryLimit && JobRetryLimit > 0) { /* * Too many tries... */ snprintf(buffer, sizeof(buffer), "Job aborted after %d unsuccessful attempts.", JobRetryLimit); job_state = IPP_JOB_ABORTED; message = buffer; ippSetString(job->attrs, &job->reasons, 0, "aborted-by-system"); } else { /* * Try again in N seconds... */ snprintf(buffer, sizeof(buffer), "Job held for %d seconds since it could not be sent.", JobRetryInterval); job->hold_until = time(NULL) + JobRetryInterval; job_state = IPP_JOB_HELD; message = buffer; ippSetString(job->attrs, &job->reasons, 0, "resources-are-not-ready"); } } break; case CUPS_BACKEND_RETRY_CURRENT : /* * Mark the job as pending and retry on the same printer... */ if (job_state == IPP_JOB_COMPLETED) { job_state = IPP_JOB_PENDING; message = "Retrying job on same printer."; ippSetString(job->attrs, &job->reasons, 0, "none"); } break; } } else if (job->status > 0) { /* * Filter had errors; stop job... */ if (job_state == IPP_JOB_COMPLETED) { job_state = IPP_JOB_STOPPED; message = "Job stopped due to filter errors; please consult the " "error_log file for details."; if (WIFSIGNALED(job->status)) ippSetString(job->attrs, &job->reasons, 0, "cups-filter-crashed"); else ippSetString(job->attrs, &job->reasons, 0, "job-completed-with-errors"); } } /* * Update the printer and job state. */ if (set_job_state && job_state != job->state_value) cupsdSetJobState(job, job_state, CUPSD_JOB_DEFAULT, "%s", message); cupsdSetPrinterState(job->printer, printer_state, printer_state == IPP_PRINTER_STOPPED); update_job_attrs(job, 0); if (job->history) { if (job->status && (job->state_value == IPP_JOB_ABORTED || job->state_value == IPP_JOB_STOPPED)) dump_job_history(job); else free_job_history(job); } cupsArrayRemove(PrintingJobs, job); /* * Apply any PPD updates... */ if (job->num_keywords) { if (cupsdUpdatePrinterPPD(job->printer, job->num_keywords, job->keywords)) cupsdSetPrinterAttrs(job->printer); cupsFreeOptions(job->num_keywords, job->keywords); job->num_keywords = 0; job->keywords = NULL; } /* * Clear the printer <-> job association... */ job->printer->job = NULL; job->printer = NULL; /* * Try printing another job... */ if (printer_state != IPP_PRINTER_STOPPED) cupsdCheckJobs(); } /* * 'get_options()' - Get a string containing the job options. */ static char * /* O - Options string */ get_options(cupsd_job_t *job, /* I - Job */ int banner_page, /* I - Printing a banner page? */ char *copies, /* I - Copies buffer */ size_t copies_size, /* I - Size of copies buffer */ char *title, /* I - Title buffer */ size_t title_size) /* I - Size of title buffer */ { int i; /* Looping var */ size_t newlength; /* New option buffer length */ char *optptr, /* Pointer to options */ *valptr; /* Pointer in value string */ ipp_attribute_t *attr; /* Current attribute */ _ppd_cache_t *pc; /* PPD cache and mapping data */ int num_pwgppds; /* Number of PWG->PPD options */ cups_option_t *pwgppds, /* PWG->PPD options */ *pwgppd, /* Current PWG->PPD option */ *preset; /* Current preset option */ int print_color_mode, /* Output mode (if any) */ print_quality; /* Print quality (if any) */ const char *ppd; /* PPD option choice */ int exact; /* Did we get an exact match? */ static char *options = NULL;/* Full list of options */ static size_t optlength = 0; /* Length of option buffer */ /* * Building the options string is harder than it needs to be, but for the * moment we need to pass strings for command-line args and not IPP attribute * pointers... :) * * First build an options array for any PWG->PPD mapped option/choice pairs. */ pc = job->printer->pc; num_pwgppds = 0; pwgppds = NULL; if (pc && !ippFindAttribute(job->attrs, "com.apple.print.DocumentTicket.PMSpoolFormat", IPP_TAG_ZERO) && !ippFindAttribute(job->attrs, "APPrinterPreset", IPP_TAG_ZERO) && (ippFindAttribute(job->attrs, "print-color-mode", IPP_TAG_ZERO) || ippFindAttribute(job->attrs, "print-quality", IPP_TAG_ZERO))) { /* * Map print-color-mode and print-quality to a preset... */ if ((attr = ippFindAttribute(job->attrs, "print-color-mode", IPP_TAG_KEYWORD)) != NULL && !strcmp(attr->values[0].string.text, "monochrome")) print_color_mode = _PWG_PRINT_COLOR_MODE_MONOCHROME; else print_color_mode = _PWG_PRINT_COLOR_MODE_COLOR; if ((attr = ippFindAttribute(job->attrs, "print-quality", IPP_TAG_ENUM)) != NULL && attr->values[0].integer >= IPP_QUALITY_DRAFT && attr->values[0].integer <= IPP_QUALITY_HIGH) print_quality = attr->values[0].integer - IPP_QUALITY_DRAFT; else print_quality = _PWG_PRINT_QUALITY_NORMAL; if (pc->num_presets[print_color_mode][print_quality] == 0) { /* * Try to find a preset that works so that we maximize the chances of us * getting a good print using IPP attributes. */ if (pc->num_presets[print_color_mode][_PWG_PRINT_QUALITY_NORMAL] > 0) print_quality = _PWG_PRINT_QUALITY_NORMAL; else if (pc->num_presets[_PWG_PRINT_COLOR_MODE_COLOR][print_quality] > 0) print_color_mode = _PWG_PRINT_COLOR_MODE_COLOR; else { print_quality = _PWG_PRINT_QUALITY_NORMAL; print_color_mode = _PWG_PRINT_COLOR_MODE_COLOR; } } if (pc->num_presets[print_color_mode][print_quality] > 0) { /* * Copy the preset options as long as the corresponding names are not * already defined in the IPP request... */ for (i = pc->num_presets[print_color_mode][print_quality], preset = pc->presets[print_color_mode][print_quality]; i > 0; i --, preset ++) { if (!ippFindAttribute(job->attrs, preset->name, IPP_TAG_ZERO)) num_pwgppds = cupsAddOption(preset->name, preset->value, num_pwgppds, &pwgppds); } } } if (pc) { if (!ippFindAttribute(job->attrs, "InputSlot", IPP_TAG_ZERO) && !ippFindAttribute(job->attrs, "HPPaperSource", IPP_TAG_ZERO)) { if ((ppd = _ppdCacheGetInputSlot(pc, job->attrs, NULL)) != NULL) num_pwgppds = cupsAddOption(pc->source_option, ppd, num_pwgppds, &pwgppds); } if (!ippFindAttribute(job->attrs, "MediaType", IPP_TAG_ZERO) && (ppd = _ppdCacheGetMediaType(pc, job->attrs, NULL)) != NULL) num_pwgppds = cupsAddOption("MediaType", ppd, num_pwgppds, &pwgppds); if (!ippFindAttribute(job->attrs, "PageRegion", IPP_TAG_ZERO) && !ippFindAttribute(job->attrs, "PageSize", IPP_TAG_ZERO) && (ppd = _ppdCacheGetPageSize(pc, job->attrs, NULL, &exact)) != NULL) { num_pwgppds = cupsAddOption("PageSize", ppd, num_pwgppds, &pwgppds); if (!ippFindAttribute(job->attrs, "media", IPP_TAG_ZERO)) num_pwgppds = cupsAddOption("media", ppd, num_pwgppds, &pwgppds); } if (!ippFindAttribute(job->attrs, "OutputBin", IPP_TAG_ZERO) && (attr = ippFindAttribute(job->attrs, "output-bin", IPP_TAG_ZERO)) != NULL && (attr->value_tag == IPP_TAG_KEYWORD || attr->value_tag == IPP_TAG_NAME) && (ppd = _ppdCacheGetOutputBin(pc, attr->values[0].string.text)) != NULL) { /* * Map output-bin to OutputBin option... */ num_pwgppds = cupsAddOption("OutputBin", ppd, num_pwgppds, &pwgppds); } if (pc->sides_option && !ippFindAttribute(job->attrs, pc->sides_option, IPP_TAG_ZERO) && (attr = ippFindAttribute(job->attrs, "sides", IPP_TAG_KEYWORD)) != NULL) { /* * Map sides to duplex option... */ if (!strcmp(attr->values[0].string.text, "one-sided")) num_pwgppds = cupsAddOption(pc->sides_option, pc->sides_1sided, num_pwgppds, &pwgppds); else if (!strcmp(attr->values[0].string.text, "two-sided-long-edge")) num_pwgppds = cupsAddOption(pc->sides_option, pc->sides_2sided_long, num_pwgppds, &pwgppds); else if (!strcmp(attr->values[0].string.text, "two-sided-short-edge")) num_pwgppds = cupsAddOption(pc->sides_option, pc->sides_2sided_short, num_pwgppds, &pwgppds); } /* * Map finishings values... */ num_pwgppds = _ppdCacheGetFinishingOptions(pc, job->attrs, IPP_FINISHINGS_NONE, num_pwgppds, &pwgppds); } /* * Figure out how much room we need... */ newlength = ipp_length(job->attrs); for (i = num_pwgppds, pwgppd = pwgppds; i > 0; i --, pwgppd ++) newlength += 1 + strlen(pwgppd->name) + 1 + strlen(pwgppd->value); /* * Then allocate/reallocate the option buffer as needed... */ if (newlength == 0) /* This can never happen, but Clang */ newlength = 1; /* thinks it can... */ if (newlength > optlength || !options) { if (!options) optptr = malloc(newlength); else optptr = realloc(options, newlength); if (!optptr) { cupsdLogJob(job, CUPSD_LOG_CRIT, "Unable to allocate " CUPS_LLFMT " bytes for option buffer.", CUPS_LLCAST newlength); return (NULL); } options = optptr; optlength = newlength; } /* * Now loop through the attributes and convert them to the textual * representation used by the filters... */ optptr = options; *optptr = '\0'; snprintf(title, title_size, "%s-%d", job->printer->name, job->id); strlcpy(copies, "1", copies_size); for (attr = job->attrs->attrs; attr != NULL; attr = attr->next) { if (!strcmp(attr->name, "copies") && attr->value_tag == IPP_TAG_INTEGER) { /* * Don't use the # copies attribute if we are printing the job sheets... */ if (!banner_page) snprintf(copies, copies_size, "%d", attr->values[0].integer); } else if (!strcmp(attr->name, "job-name") && (attr->value_tag == IPP_TAG_NAME || attr->value_tag == IPP_TAG_NAMELANG)) strlcpy(title, attr->values[0].string.text, title_size); else if (attr->group_tag == IPP_TAG_JOB) { /* * Filter out other unwanted attributes... */ if (attr->value_tag == IPP_TAG_NOVALUE || attr->value_tag == IPP_TAG_MIMETYPE || attr->value_tag == IPP_TAG_NAMELANG || attr->value_tag == IPP_TAG_TEXTLANG || (attr->value_tag == IPP_TAG_URI && strcmp(attr->name, "job-uuid") && strcmp(attr->name, "job-authorization-uri")) || attr->value_tag == IPP_TAG_URISCHEME || attr->value_tag == IPP_TAG_BEGIN_COLLECTION) /* Not yet supported */ continue; if (!strcmp(attr->name, "job-hold-until") || !strcmp(attr->name, "job-id") || !strcmp(attr->name, "job-k-octets") || !strcmp(attr->name, "job-media-sheets") || !strcmp(attr->name, "job-media-sheets-completed") || !strcmp(attr->name, "job-state") || !strcmp(attr->name, "job-state-reasons")) continue; if (!strncmp(attr->name, "job-", 4) && strcmp(attr->name, "job-account-id") && strcmp(attr->name, "job-accounting-user-id") && strcmp(attr->name, "job-authorization-uri") && strcmp(attr->name, "job-billing") && strcmp(attr->name, "job-impressions") && strcmp(attr->name, "job-originating-host-name") && strcmp(attr->name, "job-password") && strcmp(attr->name, "job-password-encryption") && strcmp(attr->name, "job-uuid") && !(job->printer->type & CUPS_PRINTER_REMOTE)) continue; if ((!strcmp(attr->name, "job-impressions") || !strcmp(attr->name, "page-label") || !strcmp(attr->name, "page-border") || !strncmp(attr->name, "number-up", 9) || !strcmp(attr->name, "page-ranges") || !strcmp(attr->name, "page-set") || !_cups_strcasecmp(attr->name, "AP_FIRSTPAGE_InputSlot") || !_cups_strcasecmp(attr->name, "AP_FIRSTPAGE_ManualFeed") || !_cups_strcasecmp(attr->name, "com.apple.print.PrintSettings." "PMTotalSidesImaged..n.") || !_cups_strcasecmp(attr->name, "com.apple.print.PrintSettings." "PMTotalBeginPages..n.")) && banner_page) continue; /* * Otherwise add them to the list... */ if (optptr > options) strlcat(optptr, " ", optlength - (size_t)(optptr - options)); if (attr->value_tag != IPP_TAG_BOOLEAN) { strlcat(optptr, attr->name, optlength - (size_t)(optptr - options)); strlcat(optptr, "=", optlength - (size_t)(optptr - options)); } for (i = 0; i < attr->num_values; i ++) { if (i) strlcat(optptr, ",", optlength - (size_t)(optptr - options)); optptr += strlen(optptr); switch (attr->value_tag) { case IPP_TAG_INTEGER : case IPP_TAG_ENUM : snprintf(optptr, optlength - (size_t)(optptr - options), "%d", attr->values[i].integer); break; case IPP_TAG_BOOLEAN : if (!attr->values[i].boolean) strlcat(optptr, "no", optlength - (size_t)(optptr - options)); strlcat(optptr, attr->name, optlength - (size_t)(optptr - options)); break; case IPP_TAG_RANGE : if (attr->values[i].range.lower == attr->values[i].range.upper) snprintf(optptr, optlength - (size_t)(optptr - options) - 1, "%d", attr->values[i].range.lower); else snprintf(optptr, optlength - (size_t)(optptr - options) - 1, "%d-%d", attr->values[i].range.lower, attr->values[i].range.upper); break; case IPP_TAG_RESOLUTION : snprintf(optptr, optlength - (size_t)(optptr - options) - 1, "%dx%d%s", attr->values[i].resolution.xres, attr->values[i].resolution.yres, attr->values[i].resolution.units == IPP_RES_PER_INCH ? "dpi" : "dpcm"); break; case IPP_TAG_STRING : case IPP_TAG_TEXT : case IPP_TAG_NAME : case IPP_TAG_KEYWORD : case IPP_TAG_CHARSET : case IPP_TAG_LANGUAGE : case IPP_TAG_URI : for (valptr = attr->values[i].string.text; *valptr;) { if (strchr(" \t\n\\\'\"", *valptr)) *optptr++ = '\\'; *optptr++ = *valptr++; } *optptr = '\0'; break; default : break; /* anti-compiler-warning-code */ } } optptr += strlen(optptr); } } /* * Finally loop through the PWG->PPD mapped options and add them... */ for (i = num_pwgppds, pwgppd = pwgppds; i > 0; i --, pwgppd ++) { *optptr++ = ' '; strlcpy(optptr, pwgppd->name, optlength - (size_t)(optptr - options)); optptr += strlen(optptr); *optptr++ = '='; strlcpy(optptr, pwgppd->value, optlength - (size_t)(optptr - options)); optptr += strlen(optptr); } cupsFreeOptions(num_pwgppds, pwgppds); /* * Return the options string... */ return (options); } /* * 'ipp_length()' - Compute the size of the buffer needed to hold * the textual IPP attributes. */ static size_t /* O - Size of attribute buffer */ ipp_length(ipp_t *ipp) /* I - IPP request */ { size_t bytes; /* Number of bytes */ int i; /* Looping var */ ipp_attribute_t *attr; /* Current attribute */ /* * Loop through all attributes... */ bytes = 0; for (attr = ipp->attrs; attr != NULL; attr = attr->next) { /* * Skip attributes that won't be sent to filters... */ if (attr->value_tag == IPP_TAG_NOVALUE || attr->value_tag == IPP_TAG_MIMETYPE || attr->value_tag == IPP_TAG_NAMELANG || attr->value_tag == IPP_TAG_TEXTLANG || attr->value_tag == IPP_TAG_URI || attr->value_tag == IPP_TAG_URISCHEME) continue; /* * Add space for a leading space and commas between each value. * For the first attribute, the leading space isn't used, so the * extra byte can be used as the nul terminator... */ bytes ++; /* " " separator */ bytes += (size_t)attr->num_values; /* "," separators */ /* * Boolean attributes appear as "foo,nofoo,foo,nofoo", while * other attributes appear as "foo=value1,value2,...,valueN". */ if (attr->value_tag != IPP_TAG_BOOLEAN) bytes += strlen(attr->name); else bytes += (size_t)attr->num_values * strlen(attr->name); /* * Now add the size required for each value in the attribute... */ switch (attr->value_tag) { case IPP_TAG_INTEGER : case IPP_TAG_ENUM : /* * Minimum value of a signed integer is -2147483647, or 11 digits. */ bytes += (size_t)attr->num_values * 11; break; case IPP_TAG_BOOLEAN : /* * Add two bytes for each false ("no") value... */ for (i = 0; i < attr->num_values; i ++) if (!attr->values[i].boolean) bytes += 2; break; case IPP_TAG_RANGE : /* * A range is two signed integers separated by a hyphen, or * 23 characters max. */ bytes += (size_t)attr->num_values * 23; break; case IPP_TAG_RESOLUTION : /* * A resolution is two signed integers separated by an "x" and * suffixed by the units, or 26 characters max. */ bytes += (size_t)attr->num_values * 26; break; case IPP_TAG_STRING : case IPP_TAG_TEXT : case IPP_TAG_NAME : case IPP_TAG_KEYWORD : case IPP_TAG_CHARSET : case IPP_TAG_LANGUAGE : case IPP_TAG_URI : /* * Strings can contain characters that need quoting. We need * at least 2 * len + 2 characters to cover the quotes and * any backslashes in the string. */ for (i = 0; i < attr->num_values; i ++) bytes += 2 * strlen(attr->values[i].string.text) + 2; break; default : break; /* anti-compiler-warning-code */ } } return (bytes); } /* * 'load_job_cache()' - Load jobs from the job.cache file. */ static void load_job_cache(const char *filename) /* I - job.cache filename */ { cups_file_t *fp; /* job.cache file */ char line[1024], /* Line buffer */ *value; /* Value on line */ int linenum; /* Line number in file */ cupsd_job_t *job; /* Current job */ int jobid; /* Job ID */ char jobfile[1024]; /* Job filename */ /* * Open the job.cache file... */ if ((fp = cupsdOpenConfFile(filename)) == NULL) { load_request_root(); return; } /* * Read entries from the job cache file and create jobs as needed. */ cupsdLogMessage(CUPSD_LOG_INFO, "Loading job cache file \"%s\"...", filename); linenum = 0; job = NULL; while (cupsFileGetConf(fp, line, sizeof(line), &value, &linenum)) { if (!_cups_strcasecmp(line, "NextJobId")) { if (value) NextJobId = atoi(value); } else if (!_cups_strcasecmp(line, " directive on line %d.", linenum); continue; } if (!value) { cupsdLogMessage(CUPSD_LOG_ERROR, "Missing job ID on line %d.", linenum); continue; } jobid = atoi(value); if (jobid < 1) { cupsdLogMessage(CUPSD_LOG_ERROR, "Bad job ID %d on line %d.", jobid, linenum); continue; } snprintf(jobfile, sizeof(jobfile), "%s/c%05d", RequestRoot, jobid); if (access(jobfile, 0)) { snprintf(jobfile, sizeof(jobfile), "%s/c%05d.N", RequestRoot, jobid); if (access(jobfile, 0)) { cupsdLogMessage(CUPSD_LOG_ERROR, "[Job %d] Files have gone away.", jobid); continue; } } job = calloc(1, sizeof(cupsd_job_t)); if (!job) { cupsdLogMessage(CUPSD_LOG_EMERG, "[Job %d] Unable to allocate memory for job.", jobid); break; } job->id = jobid; job->back_pipes[0] = -1; job->back_pipes[1] = -1; job->print_pipes[0] = -1; job->print_pipes[1] = -1; job->side_pipes[0] = -1; job->side_pipes[1] = -1; job->status_pipes[0] = -1; job->status_pipes[1] = -1; cupsdLogJob(job, CUPSD_LOG_DEBUG, "Loading from cache..."); } else if (!job) { cupsdLogMessage(CUPSD_LOG_ERROR, "Missing directive on line %d.", linenum); continue; } else if (!_cups_strcasecmp(line, "")) { cupsArrayAdd(Jobs, job); if (job->state_value <= IPP_JOB_STOPPED && cupsdLoadJob(job)) cupsArrayAdd(ActiveJobs, job); else if (job->state_value > IPP_JOB_STOPPED) { if (!job->completed_time || !job->creation_time || !job->name || !job->koctets) { cupsdLoadJob(job); unload_job(job); } } job = NULL; } else if (!value) { cupsdLogMessage(CUPSD_LOG_ERROR, "Missing value on line %d.", linenum); continue; } else if (!_cups_strcasecmp(line, "State")) { job->state_value = (ipp_jstate_t)atoi(value); if (job->state_value < IPP_JOB_PENDING) job->state_value = IPP_JOB_PENDING; else if (job->state_value > IPP_JOB_COMPLETED) job->state_value = IPP_JOB_COMPLETED; } else if (!_cups_strcasecmp(line, "Name")) { cupsdSetString(&(job->name), value); } else if (!_cups_strcasecmp(line, "Created")) { job->creation_time = strtol(value, NULL, 10); } else if (!_cups_strcasecmp(line, "Completed")) { job->completed_time = strtol(value, NULL, 10); } else if (!_cups_strcasecmp(line, "HoldUntil")) { job->hold_until = strtol(value, NULL, 10); } else if (!_cups_strcasecmp(line, "Priority")) { job->priority = atoi(value); } else if (!_cups_strcasecmp(line, "Username")) { cupsdSetString(&job->username, value); } else if (!_cups_strcasecmp(line, "Destination")) { cupsdSetString(&job->dest, value); } else if (!_cups_strcasecmp(line, "DestType")) { job->dtype = (cups_ptype_t)atoi(value); } else if (!_cups_strcasecmp(line, "KOctets")) { job->koctets = atoi(value); } else if (!_cups_strcasecmp(line, "NumFiles")) { job->num_files = atoi(value); if (job->num_files < 0) { cupsdLogMessage(CUPSD_LOG_ERROR, "Bad NumFiles value %d on line %d.", job->num_files, linenum); job->num_files = 0; continue; } if (job->num_files > 0) { snprintf(jobfile, sizeof(jobfile), "%s/d%05d-001", RequestRoot, job->id); if (access(jobfile, 0)) { cupsdLogJob(job, CUPSD_LOG_INFO, "Data files have gone away."); job->num_files = 0; continue; } job->filetypes = calloc((size_t)job->num_files, sizeof(mime_type_t *)); job->compressions = calloc((size_t)job->num_files, sizeof(int)); if (!job->filetypes || !job->compressions) { cupsdLogJob(job, CUPSD_LOG_EMERG, "Unable to allocate memory for %d files.", job->num_files); break; } } } else if (!_cups_strcasecmp(line, "File")) { int number, /* File number */ compression; /* Compression value */ char super[MIME_MAX_SUPER], /* MIME super type */ type[MIME_MAX_TYPE]; /* MIME type */ if (sscanf(value, "%d%*[ \t]%15[^/]/%255s%d", &number, super, type, &compression) != 4) { cupsdLogMessage(CUPSD_LOG_ERROR, "Bad File on line %d.", linenum); continue; } if (number < 1 || number > job->num_files) { cupsdLogMessage(CUPSD_LOG_ERROR, "Bad File number %d on line %d.", number, linenum); continue; } number --; job->compressions[number] = compression; job->filetypes[number] = mimeType(MimeDatabase, super, type); if (!job->filetypes[number]) { /* * If the original MIME type is unknown, auto-type it! */ cupsdLogJob(job, CUPSD_LOG_ERROR, "Unknown MIME type %s/%s for file %d.", super, type, number + 1); snprintf(jobfile, sizeof(jobfile), "%s/d%05d-%03d", RequestRoot, job->id, number + 1); job->filetypes[number] = mimeFileType(MimeDatabase, jobfile, NULL, job->compressions + number); /* * If that didn't work, assume it is raw... */ if (!job->filetypes[number]) job->filetypes[number] = mimeType(MimeDatabase, "application", "vnd.cups-raw"); } } else cupsdLogMessage(CUPSD_LOG_ERROR, "Unknown %s directive on line %d.", line, linenum); } if (job) { cupsdLogMessage(CUPSD_LOG_ERROR, "Missing directive on line %d.", linenum); cupsdDeleteJob(job, CUPSD_JOB_PURGE); } cupsFileClose(fp); } /* * 'load_next_job_id()' - Load the NextJobId value from the job.cache file. */ static void load_next_job_id(const char *filename) /* I - job.cache filename */ { cups_file_t *fp; /* job.cache file */ char line[1024], /* Line buffer */ *value; /* Value on line */ int linenum; /* Line number in file */ int next_job_id; /* NextJobId value from line */ /* * Read the NextJobId directive from the job.cache file and use * the value (if any). */ if ((fp = cupsFileOpen(filename, "r")) == NULL) { if (errno != ENOENT) cupsdLogMessage(CUPSD_LOG_ERROR, "Unable to open job cache file \"%s\": %s", filename, strerror(errno)); return; } cupsdLogMessage(CUPSD_LOG_INFO, "Loading NextJobId from job cache file \"%s\"...", filename); linenum = 0; while (cupsFileGetConf(fp, line, sizeof(line), &value, &linenum)) { if (!_cups_strcasecmp(line, "NextJobId")) { if (value) { next_job_id = atoi(value); if (next_job_id > NextJobId) NextJobId = next_job_id; } break; } } cupsFileClose(fp); } /* * 'load_request_root()' - Load jobs from the RequestRoot directory. */ static void load_request_root(void) { cups_dir_t *dir; /* Directory */ cups_dentry_t *dent; /* Directory entry */ cupsd_job_t *job; /* New job */ /* * Open the requests directory... */ cupsdLogMessage(CUPSD_LOG_DEBUG, "Scanning %s for jobs...", RequestRoot); if ((dir = cupsDirOpen(RequestRoot)) == NULL) { cupsdLogMessage(CUPSD_LOG_ERROR, "Unable to open spool directory \"%s\": %s", RequestRoot, strerror(errno)); return; } /* * Read all the c##### files... */ while ((dent = cupsDirRead(dir)) != NULL) if (strlen(dent->filename) >= 6 && dent->filename[0] == 'c') { /* * Allocate memory for the job... */ if ((job = calloc(sizeof(cupsd_job_t), 1)) == NULL) { cupsdLogMessage(CUPSD_LOG_ERROR, "Ran out of memory for jobs."); cupsDirClose(dir); return; } /* * Assign the job ID... */ job->id = atoi(dent->filename + 1); job->back_pipes[0] = -1; job->back_pipes[1] = -1; job->print_pipes[0] = -1; job->print_pipes[1] = -1; job->side_pipes[0] = -1; job->side_pipes[1] = -1; job->status_pipes[0] = -1; job->status_pipes[1] = -1; if (job->id >= NextJobId) NextJobId = job->id + 1; /* * Load the job... */ if (cupsdLoadJob(job)) { /* * Insert the job into the array, sorting by job priority and ID... */ cupsArrayAdd(Jobs, job); if (job->state_value <= IPP_JOB_STOPPED) cupsArrayAdd(ActiveJobs, job); else unload_job(job); } else free(job); } cupsDirClose(dir); } /* * 'remove_job_files()' - Remove the document files for a job. */ static void remove_job_files(cupsd_job_t *job) /* I - Job */ { int i; /* Looping var */ char filename[1024]; /* Document filename */ if (job->num_files <= 0) return; for (i = 1; i <= job->num_files; i ++) { snprintf(filename, sizeof(filename), "%s/d%05d-%03d", RequestRoot, job->id, i); cupsdUnlinkOrRemoveFile(filename); } free(job->filetypes); free(job->compressions); job->file_time = 0; job->num_files = 0; job->filetypes = NULL; job->compressions = NULL; LastEvent |= CUPSD_EVENT_PRINTER_STATE_CHANGED; } /* * 'remove_job_history()' - Remove the control file for a job. */ static void remove_job_history(cupsd_job_t *job) /* I - Job */ { char filename[1024]; /* Control filename */ /* * Remove the job info file... */ snprintf(filename, sizeof(filename), "%s/c%05d", RequestRoot, job->id); cupsdUnlinkOrRemoveFile(filename); LastEvent |= CUPSD_EVENT_PRINTER_STATE_CHANGED; } /* * 'set_time()' - Set one of the "time-at-xyz" attributes. */ static void set_time(cupsd_job_t *job, /* I - Job to update */ const char *name) /* I - Name of attribute */ { ipp_attribute_t *attr; /* Time attribute */ time_t curtime; /* Current time */ curtime = time(NULL); cupsdLogJob(job, CUPSD_LOG_DEBUG, "%s=%ld", name, (long)curtime); if ((attr = ippFindAttribute(job->attrs, name, IPP_TAG_ZERO)) != NULL) { attr->value_tag = IPP_TAG_INTEGER; attr->values[0].integer = curtime; } if (!strcmp(name, "time-at-completed")) { job->completed_time = curtime; if (JobHistory < INT_MAX && attr) job->history_time = attr->values[0].integer + JobHistory; else job->history_time = INT_MAX; if (job->history_time < JobHistoryUpdate || !JobHistoryUpdate) JobHistoryUpdate = job->history_time; if (JobFiles < INT_MAX && attr) job->file_time = attr->values[0].integer + JobFiles; else job->file_time = INT_MAX; if (job->file_time < JobHistoryUpdate || !JobHistoryUpdate) JobHistoryUpdate = job->file_time; cupsdLogMessage(CUPSD_LOG_DEBUG2, "set_time: JobHistoryUpdate=%ld", (long)JobHistoryUpdate); } } /* * 'start_job()' - Start a print job. */ static void start_job(cupsd_job_t *job, /* I - Job ID */ cupsd_printer_t *printer) /* I - Printer to print job */ { const char *filename; /* Support filename */ ipp_attribute_t *cancel_after = ippFindAttribute(job->attrs, "job-cancel-after", IPP_TAG_INTEGER); /* job-cancel-after attribute */ cupsdLogMessage(CUPSD_LOG_DEBUG2, "start_job(job=%p(%d), printer=%p(%s))", job, job->id, printer, printer->name); /* * Make sure we have some files around before we try to print... */ if (job->num_files == 0) { ippSetString(job->attrs, &job->reasons, 0, "aborted-by-system"); cupsdSetJobState(job, IPP_JOB_ABORTED, CUPSD_JOB_DEFAULT, "Aborting job because it has no files."); return; } /* * Update the printer and job state to "processing"... */ if (!cupsdLoadJob(job)) return; if (!job->printer_message) job->printer_message = ippFindAttribute(job->attrs, "job-printer-state-message", IPP_TAG_TEXT); if (job->printer_message) cupsdSetString(&(job->printer_message->values[0].string.text), ""); ippSetString(job->attrs, &job->reasons, 0, "job-printing"); cupsdSetJobState(job, IPP_JOB_PROCESSING, CUPSD_JOB_DEFAULT, NULL); cupsdSetPrinterState(printer, IPP_PRINTER_PROCESSING, 0); cupsdSetPrinterReasons(printer, "-cups-remote-pending," "cups-remote-pending-held," "cups-remote-processing," "cups-remote-stopped," "cups-remote-canceled," "cups-remote-aborted," "cups-remote-completed"); job->cost = 0; job->current_file = 0; job->file_time = 0; job->history_time = 0; job->progress = 0; job->printer = printer; printer->job = job; if (cancel_after) job->cancel_time = time(NULL) + ippGetInteger(cancel_after, 0); else if (MaxJobTime > 0) job->cancel_time = time(NULL) + MaxJobTime; else job->cancel_time = 0; /* * Check for support files... */ cupsdSetPrinterReasons(job->printer, "-cups-missing-filter-warning," "cups-insecure-filter-warning"); if (printer->pc) { for (filename = (const char *)cupsArrayFirst(printer->pc->support_files); filename; filename = (const char *)cupsArrayNext(printer->pc->support_files)) { if (_cupsFileCheck(filename, _CUPS_FILE_CHECK_FILE, !RunUser, cupsdLogFCMessage, printer)) break; } } /* * Setup the last exit status and security profiles... */ job->status = 0; job->profile = cupsdCreateProfile(job->id, 0); job->bprofile = cupsdCreateProfile(job->id, 1); /* * Create the status pipes and buffer... */ if (cupsdOpenPipe(job->status_pipes)) { cupsdLogJob(job, CUPSD_LOG_DEBUG, "Unable to create job status pipes - %s.", strerror(errno)); cupsdSetJobState(job, IPP_JOB_STOPPED, CUPSD_JOB_DEFAULT, "Job stopped because the scheduler could not create the " "job status pipes."); cupsdDestroyProfile(job->profile); job->profile = NULL; cupsdDestroyProfile(job->bprofile); job->bprofile = NULL; return; } job->status_buffer = cupsdStatBufNew(job->status_pipes[0], NULL); job->status_level = CUPSD_LOG_INFO; /* * Create the backchannel pipes and make them non-blocking... */ if (cupsdOpenPipe(job->back_pipes)) { cupsdLogJob(job, CUPSD_LOG_DEBUG, "Unable to create back-channel pipes - %s.", strerror(errno)); cupsdSetJobState(job, IPP_JOB_STOPPED, CUPSD_JOB_DEFAULT, "Job stopped because the scheduler could not create the " "back-channel pipes."); cupsdClosePipe(job->status_pipes); cupsdStatBufDelete(job->status_buffer); job->status_buffer = NULL; cupsdDestroyProfile(job->profile); job->profile = NULL; cupsdDestroyProfile(job->bprofile); job->bprofile = NULL; return; } fcntl(job->back_pipes[0], F_SETFL, fcntl(job->back_pipes[0], F_GETFL) | O_NONBLOCK); fcntl(job->back_pipes[1], F_SETFL, fcntl(job->back_pipes[1], F_GETFL) | O_NONBLOCK); /* * Create the side-channel pipes and make them non-blocking... */ if (socketpair(AF_LOCAL, SOCK_STREAM, 0, job->side_pipes)) { cupsdLogJob(job, CUPSD_LOG_DEBUG, "Unable to create side-channel pipes - %s.", strerror(errno)); cupsdSetJobState(job, IPP_JOB_STOPPED, CUPSD_JOB_DEFAULT, "Job stopped because the scheduler could not create the " "side-channel pipes."); cupsdClosePipe(job->back_pipes); cupsdClosePipe(job->status_pipes); cupsdStatBufDelete(job->status_buffer); job->status_buffer = NULL; cupsdDestroyProfile(job->profile); job->profile = NULL; cupsdDestroyProfile(job->bprofile); job->bprofile = NULL; return; } fcntl(job->side_pipes[0], F_SETFL, fcntl(job->side_pipes[0], F_GETFL) | O_NONBLOCK); fcntl(job->side_pipes[1], F_SETFL, fcntl(job->side_pipes[1], F_GETFL) | O_NONBLOCK); fcntl(job->side_pipes[0], F_SETFD, fcntl(job->side_pipes[0], F_GETFD) | FD_CLOEXEC); fcntl(job->side_pipes[1], F_SETFD, fcntl(job->side_pipes[1], F_GETFD) | FD_CLOEXEC); /* * Now start the first file in the job... */ cupsdContinueJob(job); } /* * 'stop_job()' - Stop a print job. */ static void stop_job(cupsd_job_t *job, /* I - Job */ cupsd_jobaction_t action) /* I - Action */ { int i; /* Looping var */ cupsdLogMessage(CUPSD_LOG_DEBUG2, "stop_job(job=%p(%d), action=%d)", job, job->id, action); FilterLevel -= job->cost; job->cost = 0; if (action == CUPSD_JOB_DEFAULT && !job->kill_time) job->kill_time = time(NULL) + JobKillDelay; else if (action >= CUPSD_JOB_FORCE) job->kill_time = 0; for (i = 0; job->filters[i]; i ++) if (job->filters[i] > 0) { cupsdEndProcess(job->filters[i], action >= CUPSD_JOB_FORCE); if (action >= CUPSD_JOB_FORCE) job->filters[i] = -job->filters[i]; } if (job->backend > 0) { cupsdEndProcess(job->backend, action >= CUPSD_JOB_FORCE); if (action >= CUPSD_JOB_FORCE) job->backend = -job->backend; } if (action >= CUPSD_JOB_FORCE) { /* * Clear job status... */ job->status = 0; } } /* * 'unload_job()' - Unload a job from memory. */ static void unload_job(cupsd_job_t *job) /* I - Job */ { if (!job->attrs) return; cupsdLogJob(job, CUPSD_LOG_DEBUG, "Unloading..."); ippDelete(job->attrs); job->attrs = NULL; job->state = NULL; job->reasons = NULL; job->sheets = NULL; job->job_sheets = NULL; job->printer_message = NULL; job->printer_reasons = NULL; } /* * 'update_job()' - Read a status update from a job's filters. */ void update_job(cupsd_job_t *job) /* I - Job to check */ { int i; /* Looping var */ int copies; /* Number of copies printed */ char message[CUPSD_SB_BUFFER_SIZE], /* Message text */ *ptr; /* Pointer update... */ int loglevel, /* Log level for message */ event = 0; /* Events? */ static const char * const levels[] = /* Log levels */ { "NONE", "EMERG", "ALERT", "CRIT", "ERROR", "WARN", "NOTICE", "INFO", "DEBUG", "DEBUG2" }; /* * Get the printer associated with this job; if the printer is stopped for * any reason then job->printer will be reset to NULL, so make sure we have * a valid pointer... */ while ((ptr = cupsdStatBufUpdate(job->status_buffer, &loglevel, message, sizeof(message))) != NULL) { /* * Process page and printer state messages as needed... */ if (loglevel == CUPSD_LOG_PAGE) { /* * Page message; send the message to the page_log file and update the * job sheet count... */ cupsdLogJob(job, CUPSD_LOG_DEBUG, "PAGE: %s", message); if (job->sheets) { if (!_cups_strncasecmp(message, "total ", 6)) { /* * Got a total count of pages from a backend or filter... */ copies = atoi(message + 6); copies -= job->sheets->values[0].integer; /* Just track the delta */ } else if (!sscanf(message, "%*d%d", &copies)) copies = 1; job->sheets->values[0].integer += copies; if (job->printer->page_limit) cupsdUpdateQuota(job->printer, job->username, copies, 0); } cupsdLogPage(job, message); if (job->sheets) cupsdAddEvent(CUPSD_EVENT_JOB_PROGRESS, job->printer, job, "Printed %d page(s).", job->sheets->values[0].integer); } else if (loglevel == CUPSD_LOG_JOBSTATE) { /* * Support "keyword" to set job-state-reasons to the specified keyword. * This is sufficient for the current paid printing stuff. */ cupsdLogJob(job, CUPSD_LOG_DEBUG, "JOBSTATE: %s", message); if (!strcmp(message, "cups-retry-as-raster")) job->retry_as_raster = 1; else ippSetString(job->attrs, &job->reasons, 0, message); } else if (loglevel == CUPSD_LOG_STATE) { cupsdLogJob(job, CUPSD_LOG_DEBUG, "STATE: %s", message); if (!strcmp(message, "paused")) { cupsdStopPrinter(job->printer, 1); return; } else if (message[0] && cupsdSetPrinterReasons(job->printer, message)) { event |= CUPSD_EVENT_PRINTER_STATE; if (MaxJobTime > 0) { /* * Reset cancel time after connecting to the device... */ for (i = 0; i < job->printer->num_reasons; i ++) if (!strcmp(job->printer->reasons[i], "connecting-to-device")) break; if (i >= job->printer->num_reasons) { ipp_attribute_t *cancel_after = ippFindAttribute(job->attrs, "job-cancel-after", IPP_TAG_INTEGER); /* job-cancel-after attribute */ if (cancel_after) job->cancel_time = time(NULL) + ippGetInteger(cancel_after, 0); else job->cancel_time = time(NULL) + MaxJobTime; } } } update_job_attrs(job, 0); } else if (loglevel == CUPSD_LOG_ATTR) { /* * Set attribute(s)... */ int num_attrs; /* Number of attributes */ cups_option_t *attrs; /* Attributes */ const char *attr; /* Attribute */ cupsdLogJob(job, CUPSD_LOG_DEBUG, "ATTR: %s", message); num_attrs = cupsParseOptions(message, 0, &attrs); if ((attr = cupsGetOption("auth-info-default", num_attrs, attrs)) != NULL) { job->printer->num_options = cupsAddOption("auth-info", attr, job->printer->num_options, &(job->printer->options)); cupsdSetPrinterAttrs(job->printer); cupsdMarkDirty(CUPSD_DIRTY_PRINTERS); } if ((attr = cupsGetOption("auth-info-required", num_attrs, attrs)) != NULL) { cupsdSetAuthInfoRequired(job->printer, attr, NULL); cupsdSetPrinterAttrs(job->printer); cupsdMarkDirty(CUPSD_DIRTY_PRINTERS); } if ((attr = cupsGetOption("job-media-progress", num_attrs, attrs)) != NULL) { int progress = atoi(attr); if (progress >= 0 && progress <= 100) { job->progress = progress; if (job->sheets) cupsdAddEvent(CUPSD_EVENT_JOB_PROGRESS, job->printer, job, "Printing page %d, %d%%", job->sheets->values[0].integer, job->progress); } } if ((attr = cupsGetOption("printer-alert", num_attrs, attrs)) != NULL) { cupsdSetString(&job->printer->alert, attr); event |= CUPSD_EVENT_PRINTER_STATE; } if ((attr = cupsGetOption("printer-alert-description", num_attrs, attrs)) != NULL) { cupsdSetString(&job->printer->alert_description, attr); event |= CUPSD_EVENT_PRINTER_STATE; } if ((attr = cupsGetOption("marker-colors", num_attrs, attrs)) != NULL) { cupsdSetPrinterAttr(job->printer, "marker-colors", (char *)attr); job->printer->marker_time = time(NULL); event |= CUPSD_EVENT_PRINTER_STATE; cupsdMarkDirty(CUPSD_DIRTY_PRINTERS); } if ((attr = cupsGetOption("marker-levels", num_attrs, attrs)) != NULL) { cupsdSetPrinterAttr(job->printer, "marker-levels", (char *)attr); job->printer->marker_time = time(NULL); event |= CUPSD_EVENT_PRINTER_STATE; cupsdMarkDirty(CUPSD_DIRTY_PRINTERS); } if ((attr = cupsGetOption("marker-low-levels", num_attrs, attrs)) != NULL) { cupsdSetPrinterAttr(job->printer, "marker-low-levels", (char *)attr); job->printer->marker_time = time(NULL); event |= CUPSD_EVENT_PRINTER_STATE; cupsdMarkDirty(CUPSD_DIRTY_PRINTERS); } if ((attr = cupsGetOption("marker-high-levels", num_attrs, attrs)) != NULL) { cupsdSetPrinterAttr(job->printer, "marker-high-levels", (char *)attr); job->printer->marker_time = time(NULL); event |= CUPSD_EVENT_PRINTER_STATE; cupsdMarkDirty(CUPSD_DIRTY_PRINTERS); } if ((attr = cupsGetOption("marker-message", num_attrs, attrs)) != NULL) { cupsdSetPrinterAttr(job->printer, "marker-message", (char *)attr); job->printer->marker_time = time(NULL); event |= CUPSD_EVENT_PRINTER_STATE; cupsdMarkDirty(CUPSD_DIRTY_PRINTERS); } if ((attr = cupsGetOption("marker-names", num_attrs, attrs)) != NULL) { cupsdSetPrinterAttr(job->printer, "marker-names", (char *)attr); job->printer->marker_time = time(NULL); event |= CUPSD_EVENT_PRINTER_STATE; cupsdMarkDirty(CUPSD_DIRTY_PRINTERS); } if ((attr = cupsGetOption("marker-types", num_attrs, attrs)) != NULL) { cupsdSetPrinterAttr(job->printer, "marker-types", (char *)attr); job->printer->marker_time = time(NULL); event |= CUPSD_EVENT_PRINTER_STATE; cupsdMarkDirty(CUPSD_DIRTY_PRINTERS); } cupsFreeOptions(num_attrs, attrs); } else if (loglevel == CUPSD_LOG_PPD) { /* * Set attribute(s)... */ cupsdLogJob(job, CUPSD_LOG_DEBUG, "PPD: %s", message); job->num_keywords = cupsParseOptions(message, job->num_keywords, &job->keywords); } else { /* * Strip legacy message prefix... */ if (!strncmp(message, "recoverable:", 12)) { ptr = message + 12; while (isspace(*ptr & 255)) ptr ++; } else if (!strncmp(message, "recovered:", 10)) { ptr = message + 10; while (isspace(*ptr & 255)) ptr ++; } else ptr = message; if (*ptr) cupsdLogJob(job, loglevel, "%s", ptr); if (loglevel < CUPSD_LOG_DEBUG && strcmp(job->printer->state_message, ptr)) { strlcpy(job->printer->state_message, ptr, sizeof(job->printer->state_message)); event |= CUPSD_EVENT_PRINTER_STATE | CUPSD_EVENT_JOB_PROGRESS; if (loglevel <= job->status_level && job->status_level > CUPSD_LOG_ERROR) { /* * Some messages show in the job-printer-state-message attribute... */ if (loglevel != CUPSD_LOG_NOTICE) job->status_level = loglevel; update_job_attrs(job, 1); cupsdLogJob(job, CUPSD_LOG_DEBUG, "Set job-printer-state-message to \"%s\", " "current level=%s", job->printer_message->values[0].string.text, levels[job->status_level]); } } } if (!strchr(job->status_buffer->buffer, '\n')) break; } if (event & CUPSD_EVENT_JOB_PROGRESS) cupsdAddEvent(CUPSD_EVENT_JOB_PROGRESS, job->printer, job, "%s", job->printer->state_message); if (event & CUPSD_EVENT_PRINTER_STATE) cupsdAddEvent(CUPSD_EVENT_PRINTER_STATE, job->printer, NULL, (job->printer->type & CUPS_PRINTER_CLASS) ? "Class \"%s\" state changed." : "Printer \"%s\" state changed.", job->printer->name); if (ptr == NULL && !job->status_buffer->bufused) { /* * See if all of the filters and the backend have returned their * exit statuses. */ for (i = 0; job->filters[i] < 0; i ++); if (job->filters[i]) { /* * EOF but we haven't collected the exit status of all filters... */ cupsdCheckProcess(); return; } if (job->current_file >= job->num_files && job->backend > 0) { /* * EOF but we haven't collected the exit status of the backend... */ cupsdCheckProcess(); return; } /* * Handle the end of job stuff... */ finalize_job(job, 1); /* * Check for new jobs... */ cupsdCheckJobs(); } } /* * 'update_job_attrs()' - Update the job-printer-* attributes. */ void update_job_attrs(cupsd_job_t *job, /* I - Job to update */ int do_message)/* I - 1 = copy job-printer-state message */ { int i; /* Looping var */ int num_reasons; /* Actual number of reasons */ const char * const *reasons; /* Reasons */ static const char *none = "none"; /* "none" reason */ /* * Get/create the job-printer-state-* attributes... */ if (!job->printer_message) { if ((job->printer_message = ippFindAttribute(job->attrs, "job-printer-state-message", IPP_TAG_TEXT)) == NULL) job->printer_message = ippAddString(job->attrs, IPP_TAG_JOB, IPP_TAG_TEXT, "job-printer-state-message", NULL, ""); } if (!job->printer_reasons) job->printer_reasons = ippFindAttribute(job->attrs, "job-printer-state-reasons", IPP_TAG_KEYWORD); /* * Copy or clear the printer-state-message value as needed... */ if (job->state_value != IPP_JOB_PROCESSING && job->status_level == CUPSD_LOG_INFO) { cupsdSetString(&(job->printer_message->values[0].string.text), ""); job->dirty = 1; cupsdMarkDirty(CUPSD_DIRTY_JOBS); } else if (job->printer->state_message[0] && do_message) { cupsdSetString(&(job->printer_message->values[0].string.text), job->printer->state_message); job->dirty = 1; cupsdMarkDirty(CUPSD_DIRTY_JOBS); } /* * ... and the printer-state-reasons value... */ if (job->printer->num_reasons == 0) { num_reasons = 1; reasons = &none; } else { num_reasons = job->printer->num_reasons; reasons = (const char * const *)job->printer->reasons; } if (!job->printer_reasons || job->printer_reasons->num_values != num_reasons) { /* * Replace/create a job-printer-state-reasons attribute... */ ippDeleteAttribute(job->attrs, job->printer_reasons); job->printer_reasons = ippAddStrings(job->attrs, IPP_TAG_JOB, IPP_TAG_KEYWORD, "job-printer-state-reasons", num_reasons, NULL, NULL); } else { /* * Don't bother clearing the reason strings if they are the same... */ for (i = 0; i < num_reasons; i ++) if (strcmp(job->printer_reasons->values[i].string.text, reasons[i])) break; if (i >= num_reasons) return; /* * Not the same, so free the current strings... */ for (i = 0; i < num_reasons; i ++) _cupsStrFree(job->printer_reasons->values[i].string.text); } /* * Copy the reasons... */ for (i = 0; i < num_reasons; i ++) job->printer_reasons->values[i].string.text = _cupsStrAlloc(reasons[i]); job->dirty = 1; cupsdMarkDirty(CUPSD_DIRTY_JOBS); } /* * End of "$Id: job.c 12142 2014-08-30 02:35:43Z msweet $". */