# SPDX-License-Identifier: GPL-2.0-only # # Phy drivers for Qualcomm and Atheros platforms # config PHY_ATH79_USB tristate "Atheros AR71XX/9XXX USB PHY driver" depends on OF && (ATH79 || COMPILE_TEST) default y if USB_EHCI_HCD_PLATFORM || USB_OHCI_HCD_PLATFORM select RESET_CONTROLLER select GENERIC_PHY help Enable this to support the USB PHY on Atheros AR71XX/9XXX SoCs. config PHY_QCOM_APQ8064_SATA tristate "Qualcomm APQ8064 SATA SerDes/PHY driver" depends on ARCH_QCOM depends on HAS_IOMEM depends on OF select GENERIC_PHY config PHY_QCOM_EDP tristate "Qualcomm eDP PHY driver" depends on ARCH_QCOM || COMPILE_TEST depends on OF depends on COMMON_CLK select GENERIC_PHY help Enable this driver to support the Qualcomm eDP PHY found in various Qualcomm chipsets. config PHY_QCOM_IPQ4019_USB tristate "Qualcomm IPQ4019 USB PHY driver" depends on OF && (ARCH_QCOM || COMPILE_TEST) select GENERIC_PHY help Support for the USB PHY-s on Qualcomm IPQ40xx SoC-s. config PHY_QCOM_IPQ806X_SATA tristate "Qualcomm IPQ806x SATA SerDes/PHY driver" depends on ARCH_QCOM depends on HAS_IOMEM depends on OF select GENERIC_PHY config PHY_QCOM_PCIE2 tristate "Qualcomm PCIe Gen2 PHY Driver" depends on OF && COMMON_CLK && (ARCH_QCOM || COMPILE_TEST) select GENERIC_PHY help Enable this to support the Qualcomm PCIe PHY, used with the Synopsys based PCIe controller. menuconfig PHY_QCOM_QMP tristate "Qualcomm QMP PHY Drivers" depends on OF && COMMON_CLK && (ARCH_QCOM || COMPILE_TEST) if PHY_QCOM_QMP config PHY_QCOM_QMP_COMBO tristate "Qualcomm QMP Combo PHY Driver" default PHY_QCOM_QMP depends on TYPEC || TYPEC=n depends on DRM || DRM=n select GENERIC_PHY select MFD_SYSCON select DRM_AUX_BRIDGE if DRM_BRIDGE help Enable this to support the QMP Combo PHY transceiver that is used with USB3 and DisplayPort controllers on Qualcomm chips. config PHY_QCOM_QMP_PCIE tristate "Qualcomm QMP PCIe PHY Driver" depends on PCI || COMPILE_TEST select GENERIC_PHY default PHY_QCOM_QMP help Enable this to support the QMP PCIe PHY transceiver that is used with PCIe controllers on Qualcomm chips. config PHY_QCOM_QMP_PCIE_8996 tristate "Qualcomm QMP PCIe 8996 PHY Driver" depends on PCI || COMPILE_TEST select GENERIC_PHY default PHY_QCOM_QMP help Enable this to support the QMP PCIe PHY transceiver that is used with PCIe controllers on Qualcomm msm8996 chips. config PHY_QCOM_QMP_UFS tristate "Qualcomm QMP UFS PHY Driver" select GENERIC_PHY default PHY_QCOM_QMP help Enable this to support the QMP UFS PHY transceiver that is used with UFS controllers on Qualcomm chips. config PHY_QCOM_QMP_USB tristate "Qualcomm QMP USB PHY Driver" select GENERIC_PHY default PHY_QCOM_QMP help Enable this to support the QMP USB PHY transceiver that is used with USB3 controllers on Qualcomm chips. config PHY_QCOM_QMP_USB_LEGACY tristate "Qualcomm QMP legacy USB PHY Driver" select GENERIC_PHY default n help Enable this legacy driver to support the QMP USB+DisplayPort Combo PHY transceivers working only in USB3 mode on Qualcomm chips. This driver exists only for compatibility with older device trees, existing users have been migrated to PHY_QCOM_QMP_COMBO driver. endif # PHY_QCOM_QMP config PHY_QCOM_QUSB2 tristate "Qualcomm QUSB2 PHY Driver" depends on OF && (ARCH_QCOM || COMPILE_TEST) depends on NVMEM || !NVMEM select GENERIC_PHY help Enable this to support the HighSpeed QUSB2 PHY transceiver for USB controllers on Qualcomm chips. This driver supports the high-speed PHY which is usually paired with either the ChipIdea or Synopsys DWC3 USB IPs on MSM SOCs. config PHY_QCOM_SNPS_EUSB2 tristate "Qualcomm SNPS eUSB2 PHY Driver" depends on OF && (ARCH_QCOM || COMPILE_TEST) select GENERIC_PHY help Enable support for the USB high-speed SNPS eUSB2 phy on Qualcomm chipsets. The PHY is paired with a Synopsys DWC3 USB controller on Qualcomm SOCs. config PHY_QCOM_EUSB2_REPEATER tristate "Qualcomm SNPS eUSB2 Repeater Driver" depends on OF && (ARCH_QCOM || COMPILE_TEST) select GENERIC_PHY help Enable support for the USB high-speed SNPS eUSB2 repeater on Qualcomm PMICs. The repeater is paired with a Synopsys eUSB2 Phy on Qualcomm SOCs. config PHY_QCOM_M31_USB tristate "Qualcomm M31 HS PHY driver support" depends on USB && (ARCH_QCOM || COMPILE_TEST) select GENERIC_PHY help Enable this to support M31 HS PHY transceivers on Qualcomm chips with DWC3 USB core. It handles PHY initialization, clock management required after resetting the hardware and power management. This driver is required even for peripheral only or host only mode configurations. config PHY_QCOM_USB_HS tristate "Qualcomm USB HS PHY module" depends on USB_ULPI_BUS depends on EXTCON || !EXTCON # if EXTCON=m, this cannot be built-in select GENERIC_PHY help Support for the USB high-speed ULPI compliant phy on Qualcomm chipsets. config PHY_QCOM_USB_SNPS_FEMTO_V2 tristate "Qualcomm SNPS FEMTO USB HS PHY V2 module" depends on OF && (ARCH_QCOM || COMPILE_TEST) select GENERIC_PHY help Enable support for the USB high-speed SNPS Femto phy on Qualcomm chipsets. This PHY has differences in the register map compared to the V1 variants. The PHY is paired with a Synopsys DWC3 USB controller on Qualcomm SOCs. config PHY_QCOM_USB_HSIC tristate "Qualcomm USB HSIC ULPI PHY module" depends on USB_ULPI_BUS select GENERIC_PHY help Support for the USB HSIC ULPI compliant PHY on QCOM chipsets. config PHY_QCOM_USB_HS_28NM tristate "Qualcomm 28nm High-Speed PHY" depends on OF && (ARCH_QCOM || COMPILE_TEST) depends on EXTCON || !EXTCON # if EXTCON=m, this cannot be built-in select GENERIC_PHY help Enable this to support the Qualcomm Synopsys DesignWare Core 28nm High-Speed PHY driver. This driver supports the Hi-Speed PHY which is usually paired with either the ChipIdea or Synopsys DWC3 USB IPs on MSM SOCs. config PHY_QCOM_USB_SS tristate "Qualcomm USB Super-Speed PHY driver" depends on OF && (ARCH_QCOM || COMPILE_TEST) depends on EXTCON || !EXTCON # if EXTCON=m, this cannot be built-in select GENERIC_PHY help Enable this to support the Super-Speed USB transceiver on various Qualcomm chipsets. config PHY_QCOM_IPQ806X_USB tristate "Qualcomm IPQ806x DWC3 USB PHY driver" depends on HAS_IOMEM depends on OF && (ARCH_QCOM || COMPILE_TEST) select GENERIC_PHY help This option enables support for the Synopsis PHYs present inside the Qualcomm USB3.0 DWC3 controller on ipq806x SoC. This driver supports both HS and SS PHY controllers. config PHY_QCOM_SGMII_ETH tristate "Qualcomm DWMAC SGMII SerDes/PHY driver" depends on OF && (ARCH_QCOM || COMPILE_TEST) depends on HAS_IOMEM select GENERIC_PHY help Enable this to support the internal SerDes/SGMII PHY on various Qualcomm chipsets.