/* SPDX-License-Identifier: GPL-2.0 */ #ifndef B43legacy_H_ #define B43legacy_H_ #include #include #include #include #include #include #include #include #include #include #include #include #include #include "debugfs.h" #include "leds.h" #include "rfkill.h" #include "phy.h" #define B43legacy_IRQWAIT_MAX_RETRIES 20 /* MMIO offsets */ #define B43legacy_MMIO_DMA0_REASON 0x20 #define B43legacy_MMIO_DMA0_IRQ_MASK 0x24 #define B43legacy_MMIO_DMA1_REASON 0x28 #define B43legacy_MMIO_DMA1_IRQ_MASK 0x2C #define B43legacy_MMIO_DMA2_REASON 0x30 #define B43legacy_MMIO_DMA2_IRQ_MASK 0x34 #define B43legacy_MMIO_DMA3_REASON 0x38 #define B43legacy_MMIO_DMA3_IRQ_MASK 0x3C #define B43legacy_MMIO_DMA4_REASON 0x40 #define B43legacy_MMIO_DMA4_IRQ_MASK 0x44 #define B43legacy_MMIO_DMA5_REASON 0x48 #define B43legacy_MMIO_DMA5_IRQ_MASK 0x4C #define B43legacy_MMIO_MACCTL 0x120 /* MAC control */ #define B43legacy_MMIO_MACCMD 0x124 /* MAC command */ #define B43legacy_MMIO_GEN_IRQ_REASON 0x128 #define B43legacy_MMIO_GEN_IRQ_MASK 0x12C #define B43legacy_MMIO_RAM_CONTROL 0x130 #define B43legacy_MMIO_RAM_DATA 0x134 #define B43legacy_MMIO_PS_STATUS 0x140 #define B43legacy_MMIO_RADIO_HWENABLED_HI 0x158 #define B43legacy_MMIO_SHM_CONTROL 0x160 #define B43legacy_MMIO_SHM_DATA 0x164 #define B43legacy_MMIO_SHM_DATA_UNALIGNED 0x166 #define B43legacy_MMIO_XMITSTAT_0 0x170 #define B43legacy_MMIO_XMITSTAT_1 0x174 #define B43legacy_MMIO_REV3PLUS_TSF_LOW 0x180 /* core rev >= 3 only */ #define B43legacy_MMIO_REV3PLUS_TSF_HIGH 0x184 /* core rev >= 3 only */ #define B43legacy_MMIO_TSF_CFP_REP 0x188 #define B43legacy_MMIO_TSF_CFP_START 0x18C /* 32-bit DMA */ #define B43legacy_MMIO_DMA32_BASE0 0x200 #define B43legacy_MMIO_DMA32_BASE1 0x220 #define B43legacy_MMIO_DMA32_BASE2 0x240 #define B43legacy_MMIO_DMA32_BASE3 0x260 #define B43legacy_MMIO_DMA32_BASE4 0x280 #define B43legacy_MMIO_DMA32_BASE5 0x2A0 /* 64-bit DMA */ #define B43legacy_MMIO_DMA64_BASE0 0x200 #define B43legacy_MMIO_DMA64_BASE1 0x240 #define B43legacy_MMIO_DMA64_BASE2 0x280 #define B43legacy_MMIO_DMA64_BASE3 0x2C0 #define B43legacy_MMIO_DMA64_BASE4 0x300 #define B43legacy_MMIO_DMA64_BASE5 0x340 /* PIO */ #define B43legacy_MMIO_PIO1_BASE 0x300 #define B43legacy_MMIO_PIO2_BASE 0x310 #define B43legacy_MMIO_PIO3_BASE 0x320 #define B43legacy_MMIO_PIO4_BASE 0x330 #define B43legacy_MMIO_PHY_VER 0x3E0 #define B43legacy_MMIO_PHY_RADIO 0x3E2 #define B43legacy_MMIO_PHY0 0x3E6 #define B43legacy_MMIO_ANTENNA 0x3E8 #define B43legacy_MMIO_CHANNEL 0x3F0 #define B43legacy_MMIO_CHANNEL_EXT 0x3F4 #define B43legacy_MMIO_RADIO_CONTROL 0x3F6 #define B43legacy_MMIO_RADIO_DATA_HIGH 0x3F8 #define B43legacy_MMIO_RADIO_DATA_LOW 0x3FA #define B43legacy_MMIO_PHY_CONTROL 0x3FC #define B43legacy_MMIO_PHY_DATA 0x3FE #define B43legacy_MMIO_MACFILTER_CONTROL 0x420 #define B43legacy_MMIO_MACFILTER_DATA 0x422 #define B43legacy_MMIO_RCMTA_COUNT 0x43C /* Receive Match Transmitter Addr */ #define B43legacy_MMIO_RADIO_HWENABLED_LO 0x49A #define B43legacy_MMIO_GPIO_CONTROL 0x49C #define B43legacy_MMIO_GPIO_MASK 0x49E #define B43legacy_MMIO_TSF_CFP_PRETBTT 0x612 #define B43legacy_MMIO_TSF_0 0x632 /* core rev < 3 only */ #define B43legacy_MMIO_TSF_1 0x634 /* core rev < 3 only */ #define B43legacy_MMIO_TSF_2 0x636 /* core rev < 3 only */ #define B43legacy_MMIO_TSF_3 0x638 /* core rev < 3 only */ #define B43legacy_MMIO_RNG 0x65A #define B43legacy_MMIO_POWERUP_DELAY 0x6A8 /* SPROM boardflags_lo values */ #define B43legacy_BFL_PACTRL 0x0002 #define B43legacy_BFL_RSSI 0x0008 #define B43legacy_BFL_EXTLNA 0x1000 /* GPIO register offset, in both ChipCommon and PCI core. */ #define B43legacy_GPIO_CONTROL 0x6c /* SHM Routing */ #define B43legacy_SHM_SHARED 0x0001 #define B43legacy_SHM_WIRELESS 0x0002 #define B43legacy_SHM_HW 0x0004 #define B43legacy_SHM_UCODE 0x0300 /* SHM Routing modifiers */ #define B43legacy_SHM_AUTOINC_R 0x0200 /* Read Auto-increment */ #define B43legacy_SHM_AUTOINC_W 0x0100 /* Write Auto-increment */ #define B43legacy_SHM_AUTOINC_RW (B43legacy_SHM_AUTOINC_R | \ B43legacy_SHM_AUTOINC_W) /* Misc SHM_SHARED offsets */ #define B43legacy_SHM_SH_WLCOREREV 0x0016 /* 802.11 core revision */ #define B43legacy_SHM_SH_HOSTFLO 0x005E /* Hostflags ucode opts (low) */ #define B43legacy_SHM_SH_HOSTFHI 0x0060 /* Hostflags ucode opts (high) */ /* SHM_SHARED crypto engine */ #define B43legacy_SHM_SH_KEYIDXBLOCK 0x05D4 /* Key index/algorithm block */ /* SHM_SHARED beacon/AP variables */ #define B43legacy_SHM_SH_DTIMP 0x0012 /* DTIM period */ #define B43legacy_SHM_SH_BTL0 0x0018 /* Beacon template length 0 */ #define B43legacy_SHM_SH_BTL1 0x001A /* Beacon template length 1 */ #define B43legacy_SHM_SH_BTSFOFF 0x001C /* Beacon TSF offset */ #define B43legacy_SHM_SH_TIMPOS 0x001E /* TIM position in beacon */ #define B43legacy_SHM_SH_BEACPHYCTL 0x0054 /* Beacon PHY TX control word */ /* SHM_SHARED ACK/CTS control */ #define B43legacy_SHM_SH_ACKCTSPHYCTL 0x0022 /* ACK/CTS PHY control word */ /* SHM_SHARED probe response variables */ #define B43legacy_SHM_SH_PRTLEN 0x004A /* Probe Response template length */ #define B43legacy_SHM_SH_PRMAXTIME 0x0074 /* Probe Response max time */ #define B43legacy_SHM_SH_PRPHYCTL 0x0188 /* Probe Resp PHY TX control */ /* SHM_SHARED rate tables */ #define B43legacy_SHM_SH_OFDMDIRECT 0x0480 /* Pointer to OFDM direct map */ #define B43legacy_SHM_SH_OFDMBASIC 0x04A0 /* Pointer to OFDM basic rate map */ #define B43legacy_SHM_SH_CCKDIRECT 0x04C0 /* Pointer to CCK direct map */ #define B43legacy_SHM_SH_CCKBASIC 0x04E0 /* Pointer to CCK basic rate map */ /* SHM_SHARED microcode soft registers */ #define B43legacy_SHM_SH_UCODEREV 0x0000 /* Microcode revision */ #define B43legacy_SHM_SH_UCODEPATCH 0x0002 /* Microcode patchlevel */ #define B43legacy_SHM_SH_UCODEDATE 0x0004 /* Microcode date */ #define B43legacy_SHM_SH_UCODETIME 0x0006 /* Microcode time */ #define B43legacy_SHM_SH_SPUWKUP 0x0094 /* pre-wakeup for synth PU in us */ #define B43legacy_SHM_SH_PRETBTT 0x0096 /* pre-TBTT in us */ #define B43legacy_UCODEFLAGS_OFFSET 0x005E /* Hardware Radio Enable masks */ #define B43legacy_MMIO_RADIO_HWENABLED_HI_MASK (1 << 16) #define B43legacy_MMIO_RADIO_HWENABLED_LO_MASK (1 << 4) /* HostFlags. See b43legacy_hf_read/write() */ #define B43legacy_HF_SYMW 0x00000002 /* G-PHY SYM workaround */ #define B43legacy_HF_GDCW 0x00000020 /* G-PHY DV cancel filter */ #define B43legacy_HF_OFDMPABOOST 0x00000040 /* Enable PA boost OFDM */ #define B43legacy_HF_EDCF 0x00000100 /* on if WME/MAC suspended */ /* MacFilter offsets. */ #define B43legacy_MACFILTER_SELF 0x0000 #define B43legacy_MACFILTER_BSSID 0x0003 #define B43legacy_MACFILTER_MAC 0x0010 /* PHYVersioning */ #define B43legacy_PHYTYPE_B 0x01 #define B43legacy_PHYTYPE_G 0x02 /* PHYRegisters */ #define B43legacy_PHY_G_LO_CONTROL 0x0810 #define B43legacy_PHY_ILT_G_CTRL 0x0472 #define B43legacy_PHY_ILT_G_DATA1 0x0473 #define B43legacy_PHY_ILT_G_DATA2 0x0474 #define B43legacy_PHY_G_PCTL 0x0029 #define B43legacy_PHY_RADIO_BITFIELD 0x0401 #define B43legacy_PHY_G_CRS 0x0429 #define B43legacy_PHY_NRSSILT_CTRL 0x0803 #define B43legacy_PHY_NRSSILT_DATA 0x0804 /* RadioRegisters */ #define B43legacy_RADIOCTL_ID 0x01 /* MAC Control bitfield */ #define B43legacy_MACCTL_ENABLED 0x00000001 /* MAC Enabled */ #define B43legacy_MACCTL_PSM_RUN 0x00000002 /* Run Microcode */ #define B43legacy_MACCTL_PSM_JMP0 0x00000004 /* Microcode jump to 0 */ #define B43legacy_MACCTL_SHM_ENABLED 0x00000100 /* SHM Enabled */ #define B43legacy_MACCTL_IHR_ENABLED 0x00000400 /* IHR Region Enabled */ #define B43legacy_MACCTL_BE 0x00010000 /* Big Endian mode */ #define B43legacy_MACCTL_INFRA 0x00020000 /* Infrastructure mode */ #define B43legacy_MACCTL_AP 0x00040000 /* AccessPoint mode */ #define B43legacy_MACCTL_RADIOLOCK 0x00080000 /* Radio lock */ #define B43legacy_MACCTL_BEACPROMISC 0x00100000 /* Beacon Promiscuous */ #define B43legacy_MACCTL_KEEP_BADPLCP 0x00200000 /* Keep bad PLCP frames */ #define B43legacy_MACCTL_KEEP_CTL 0x00400000 /* Keep control frames */ #define B43legacy_MACCTL_KEEP_BAD 0x00800000 /* Keep bad frames (FCS) */ #define B43legacy_MACCTL_PROMISC 0x01000000 /* Promiscuous mode */ #define B43legacy_MACCTL_HWPS 0x02000000 /* Hardware Power Saving */ #define B43legacy_MACCTL_AWAKE 0x04000000 /* Device is awake */ #define B43legacy_MACCTL_TBTTHOLD 0x10000000 /* TBTT Hold */ #define B43legacy_MACCTL_GMODE 0x80000000 /* G Mode */ /* MAC Command bitfield */ #define B43legacy_MACCMD_BEACON0_VALID 0x00000001 /* Beacon 0 in template RAM is busy/valid */ #define B43legacy_MACCMD_BEACON1_VALID 0x00000002 /* Beacon 1 in template RAM is busy/valid */ #define B43legacy_MACCMD_DFQ_VALID 0x00000004 /* Directed frame queue valid (IBSS PS mode, ATIM) */ #define B43legacy_MACCMD_CCA 0x00000008 /* Clear channel assessment */ #define B43legacy_MACCMD_BGNOISE 0x00000010 /* Background noise */ /* 802.11 core specific TM State Low flags */ #define B43legacy_TMSLOW_GMODE 0x20000000 /* G Mode Enable */ #define B43legacy_TMSLOW_PLLREFSEL 0x00200000 /* PLL Freq Ref Select */ #define B43legacy_TMSLOW_MACPHYCLKEN 0x00100000 /* MAC PHY Clock Ctrl Enbl */ #define B43legacy_TMSLOW_PHYRESET 0x00080000 /* PHY Reset */ #define B43legacy_TMSLOW_PHYCLKEN 0x00040000 /* PHY Clock Enable */ /* 802.11 core specific TM State High flags */ #define B43legacy_TMSHIGH_FCLOCK 0x00040000 /* Fast Clock Available */ #define B43legacy_TMSHIGH_GPHY 0x00010000 /* G-PHY avail (rev >= 5) */ #define B43legacy_UCODEFLAG_AUTODIV 0x0001 /* Generic-Interrupt reasons. */ #define B43legacy_IRQ_MAC_SUSPENDED 0x00000001 #define B43legacy_IRQ_BEACON 0x00000002 #define B43legacy_IRQ_TBTT_INDI 0x00000004 /* Target Beacon Transmit Time */ #define B43legacy_IRQ_BEACON_TX_OK 0x00000008 #define B43legacy_IRQ_BEACON_CANCEL 0x00000010 #define B43legacy_IRQ_ATIM_END 0x00000020 #define B43legacy_IRQ_PMQ 0x00000040 #define B43legacy_IRQ_PIO_WORKAROUND 0x00000100 #define B43legacy_IRQ_MAC_TXERR 0x00000200 #define B43legacy_IRQ_PHY_TXERR 0x00000800 #define B43legacy_IRQ_PMEVENT 0x00001000 #define B43legacy_IRQ_TIMER0 0x00002000 #define B43legacy_IRQ_TIMER1 0x00004000 #define B43legacy_IRQ_DMA 0x00008000 #define B43legacy_IRQ_TXFIFO_FLUSH_OK 0x00010000 #define B43legacy_IRQ_CCA_MEASURE_OK 0x00020000 #define B43legacy_IRQ_NOISESAMPLE_OK 0x00040000 #define B43legacy_IRQ_UCODE_DEBUG 0x08000000 #define B43legacy_IRQ_RFKILL 0x10000000 #define B43legacy_IRQ_TX_OK 0x20000000 #define B43legacy_IRQ_PHY_G_CHANGED 0x40000000 #define B43legacy_IRQ_TIMEOUT 0x80000000 #define B43legacy_IRQ_ALL 0xFFFFFFFF #define B43legacy_IRQ_MASKTEMPLATE (B43legacy_IRQ_MAC_SUSPENDED | \ B43legacy_IRQ_TBTT_INDI | \ B43legacy_IRQ_ATIM_END | \ B43legacy_IRQ_PMQ | \ B43legacy_IRQ_MAC_TXERR | \ B43legacy_IRQ_PHY_TXERR | \ B43legacy_IRQ_DMA | \ B43legacy_IRQ_TXFIFO_FLUSH_OK | \ B43legacy_IRQ_NOISESAMPLE_OK | \ B43legacy_IRQ_UCODE_DEBUG | \ B43legacy_IRQ_RFKILL | \ B43legacy_IRQ_TX_OK) /* Device specific rate values. * The actual values defined here are (rate_in_mbps * 2). * Some code depends on this. Don't change it. */ #define B43legacy_CCK_RATE_1MB 2 #define B43legacy_CCK_RATE_2MB 4 #define B43legacy_CCK_RATE_5MB 11 #define B43legacy_CCK_RATE_11MB 22 #define B43legacy_OFDM_RATE_6MB 12 #define B43legacy_OFDM_RATE_9MB 18 #define B43legacy_OFDM_RATE_12MB 24 #define B43legacy_OFDM_RATE_18MB 36 #define B43legacy_OFDM_RATE_24MB 48 #define B43legacy_OFDM_RATE_36MB 72 #define B43legacy_OFDM_RATE_48MB 96 #define B43legacy_OFDM_RATE_54MB 108 /* Convert a b43legacy rate value to a rate in 100kbps */ #define B43legacy_RATE_TO_100KBPS(rate) (((rate) * 10) / 2) #define B43legacy_DEFAULT_SHORT_RETRY_LIMIT 7 #define B43legacy_DEFAULT_LONG_RETRY_LIMIT 4 #define B43legacy_PHY_TX_BADNESS_LIMIT 1000 /* Max size of a security key */ #define B43legacy_SEC_KEYSIZE 16 /* Security algorithms. */ enum { B43legacy_SEC_ALGO_NONE = 0, /* unencrypted, as of TX header. */ B43legacy_SEC_ALGO_WEP40, B43legacy_SEC_ALGO_TKIP, B43legacy_SEC_ALGO_AES, B43legacy_SEC_ALGO_WEP104, B43legacy_SEC_ALGO_AES_LEGACY, }; /* Core Information Registers */ #define B43legacy_CIR_BASE 0xf00 #define B43legacy_CIR_SBTPSFLAG (B43legacy_CIR_BASE + 0x18) #define B43legacy_CIR_SBIMSTATE (B43legacy_CIR_BASE + 0x90) #define B43legacy_CIR_SBINTVEC (B43legacy_CIR_BASE + 0x94) #define B43legacy_CIR_SBTMSTATELOW (B43legacy_CIR_BASE + 0x98) #define B43legacy_CIR_SBTMSTATEHIGH (B43legacy_CIR_BASE + 0x9c) #define B43legacy_CIR_SBIMCONFIGLOW (B43legacy_CIR_BASE + 0xa8) #define B43legacy_CIR_SB_ID_HI (B43legacy_CIR_BASE + 0xfc) /* sbtmstatehigh state flags */ #define B43legacy_SBTMSTATEHIGH_SERROR 0x00000001 #define B43legacy_SBTMSTATEHIGH_BUSY 0x00000004 #define B43legacy_SBTMSTATEHIGH_TIMEOUT 0x00000020 #define B43legacy_SBTMSTATEHIGH_G_PHY_AVAIL 0x00010000 #define B43legacy_SBTMSTATEHIGH_COREFLAGS 0x1FFF0000 #define B43legacy_SBTMSTATEHIGH_DMA64BIT 0x10000000 #define B43legacy_SBTMSTATEHIGH_GATEDCLK 0x20000000 #define B43legacy_SBTMSTATEHIGH_BISTFAILED 0x40000000 #define B43legacy_SBTMSTATEHIGH_BISTCOMPLETE 0x80000000 /* sbimstate flags */ #define B43legacy_SBIMSTATE_IB_ERROR 0x20000 #define B43legacy_SBIMSTATE_TIMEOUT 0x40000 #define PFX KBUILD_MODNAME ": " #ifdef assert # undef assert #endif #ifdef CONFIG_B43LEGACY_DEBUG # define B43legacy_WARN_ON(x) WARN_ON(x) # define B43legacy_BUG_ON(expr) \ do { \ if (unlikely((expr))) { \ printk(KERN_INFO PFX "Test (%s) failed\n", \ #expr); \ BUG_ON(expr); \ } \ } while (0) # define B43legacy_DEBUG 1 #else /* This will evaluate the argument even if debugging is disabled. */ static inline bool __b43legacy_warn_on_dummy(bool x) { return x; } # define B43legacy_WARN_ON(x) __b43legacy_warn_on_dummy(unlikely(!!(x))) # define B43legacy_BUG_ON(x) do { /* nothing */ } while (0) # define B43legacy_DEBUG 0 #endif struct net_device; struct pci_dev; struct b43legacy_dmaring; struct b43legacy_pioqueue; /* The firmware file header */ #define B43legacy_FW_TYPE_UCODE 'u' #define B43legacy_FW_TYPE_PCM 'p' #define B43legacy_FW_TYPE_IV 'i' struct b43legacy_fw_header { /* File type */ u8 type; /* File format version */ u8 ver; u8 __padding[2]; /* Size of the data. For ucode and PCM this is in bytes. * For IV this is number-of-ivs. */ __be32 size; } __packed; /* Initial Value file format */ #define B43legacy_IV_OFFSET_MASK 0x7FFF #define B43legacy_IV_32BIT 0x8000 struct b43legacy_iv { __be16 offset_size; union { __be16 d16; __be32 d32; } __packed data; } __packed; #define B43legacy_PHYMODE(phytype) (1 << (phytype)) #define B43legacy_PHYMODE_B B43legacy_PHYMODE \ ((B43legacy_PHYTYPE_B)) #define B43legacy_PHYMODE_G B43legacy_PHYMODE \ ((B43legacy_PHYTYPE_G)) /* Value pair to measure the LocalOscillator. */ struct b43legacy_lopair { s8 low; s8 high; u8 used:1; }; #define B43legacy_LO_COUNT (14*4) struct b43legacy_phy { /* Possible PHYMODEs on this PHY */ u8 possible_phymodes; /* GMODE bit enabled in MACCTL? */ bool gmode; /* Analog Type */ u8 analog; /* B43legacy_PHYTYPE_ */ u8 type; /* PHY revision number. */ u8 rev; u16 antenna_diversity; u16 savedpctlreg; /* Radio versioning */ u16 radio_manuf; /* Radio manufacturer */ u16 radio_ver; /* Radio version */ u8 calibrated:1; u8 radio_rev; /* Radio revision */ bool dyn_tssi_tbl; /* tssi2dbm is kmalloc()ed. */ /* ACI (adjacent channel interference) flags. */ bool aci_enable; bool aci_wlan_automatic; bool aci_hw_rssi; /* Radio switched on/off */ bool radio_on; struct { /* Values saved when turning the radio off. * They are needed when turning it on again. */ bool valid; u16 rfover; u16 rfoverval; } radio_off_context; u16 minlowsig[2]; u16 minlowsigpos[2]; /* LO Measurement Data. * Use b43legacy_get_lopair() to get a value. */ struct b43legacy_lopair *_lo_pairs; /* TSSI to dBm table in use */ const s8 *tssi2dbm; /* idle TSSI value */ s8 idle_tssi; /* Target idle TSSI */ int tgt_idle_tssi; /* Current idle TSSI */ int cur_idle_tssi; /* LocalOscillator control values. */ struct b43legacy_txpower_lo_control *lo_control; /* Values from b43legacy_calc_loopback_gain() */ s16 max_lb_gain; /* Maximum Loopback gain in hdB */ s16 trsw_rx_gain; /* TRSW RX gain in hdB */ s16 lna_lod_gain; /* LNA lod */ s16 lna_gain; /* LNA */ s16 pga_gain; /* PGA */ /* Desired TX power level (in dBm). This is set by the user and * adjusted in b43legacy_phy_xmitpower(). */ u8 power_level; /* Values from b43legacy_calc_loopback_gain() */ u16 loopback_gain[2]; /* TX Power control values. */ /* B/G PHY */ struct { /* Current Radio Attenuation for TXpower recalculation. */ u16 rfatt; /* Current Baseband Attenuation for TXpower recalculation. */ u16 bbatt; /* Current TXpower control value for TXpower recalculation. */ u16 txctl1; u16 txctl2; }; /* A PHY */ struct { u16 txpwr_offset; }; /* Current Interference Mitigation mode */ int interfmode; /* Stack of saved values from the Interference Mitigation code. * Each value in the stack is laid out as follows: * bit 0-11: offset * bit 12-15: register ID * bit 16-32: value * register ID is: 0x1 PHY, 0x2 Radio, 0x3 ILT */ #define B43legacy_INTERFSTACK_SIZE 26 u32 interfstack[B43legacy_INTERFSTACK_SIZE]; /* Saved values from the NRSSI Slope calculation */ s16 nrssi[2]; s32 nrssislope; /* In memory nrssi lookup table. */ s8 nrssi_lt[64]; /* current channel */ u8 channel; u16 lofcal; u16 initval; /* PHY TX errors counter. */ atomic_t txerr_cnt; #if B43legacy_DEBUG /* Manual TX-power control enabled? */ bool manual_txpower_control; /* PHY registers locked by b43legacy_phy_lock()? */ bool phy_locked; #endif /* B43legacy_DEBUG */ }; /* Data structures for DMA transmission, per 80211 core. */ struct b43legacy_dma { struct b43legacy_dmaring *tx_ring0; struct b43legacy_dmaring *tx_ring1; struct b43legacy_dmaring *tx_ring2; struct b43legacy_dmaring *tx_ring3; struct b43legacy_dmaring *tx_ring4; struct b43legacy_dmaring *tx_ring5; struct b43legacy_dmaring *rx_ring0; struct b43legacy_dmaring *rx_ring3; /* only on core.rev < 5 */ u32 translation; /* Routing bits */ }; /* Data structures for PIO transmission, per 80211 core. */ struct b43legacy_pio { struct b43legacy_pioqueue *queue0; struct b43legacy_pioqueue *queue1; struct b43legacy_pioqueue *queue2; struct b43legacy_pioqueue *queue3; }; /* Context information for a noise calculation (Link Quality). */ struct b43legacy_noise_calculation { u8 channel_at_start; bool calculation_running; u8 nr_samples; s8 samples[8][4]; }; struct b43legacy_stats { u8 link_noise; /* Store the last TX/RX times here for updating the leds. */ unsigned long last_tx; unsigned long last_rx; }; struct b43legacy_key { void *keyconf; bool enabled; u8 algorithm; }; #define B43legacy_QOS_QUEUE_NUM 4 struct b43legacy_wldev; /* QOS parameters for a queue. */ struct b43legacy_qos_params { /* The QOS parameters */ struct ieee80211_tx_queue_params p; }; /* Data structure for the WLAN parts (802.11 cores) of the b43legacy chip. */ struct b43legacy_wl { /* Pointer to the active wireless device on this chip */ struct b43legacy_wldev *current_dev; /* Pointer to the ieee80211 hardware data structure */ struct ieee80211_hw *hw; spinlock_t irq_lock; /* locks IRQ */ struct mutex mutex; /* locks wireless core state */ spinlock_t leds_lock; /* lock for leds */ /* firmware loading work */ struct work_struct firmware_load; /* We can only have one operating interface (802.11 core) * at a time. General information about this interface follows. */ struct ieee80211_vif *vif; /* MAC address (can be NULL). */ u8 mac_addr[ETH_ALEN]; /* Current BSSID (can be NULL). */ u8 bssid[ETH_ALEN]; /* Interface type. (IEEE80211_IF_TYPE_XXX) */ int if_type; /* Is the card operating in AP, STA or IBSS mode? */ bool operating; /* filter flags */ unsigned int filter_flags; /* Stats about the wireless interface */ struct ieee80211_low_level_stats ieee_stats; #ifdef CONFIG_B43LEGACY_HWRNG struct hwrng rng; u8 rng_initialized; char rng_name[30 + 1]; #endif /* List of all wireless devices on this chip */ struct list_head devlist; u8 nr_devs; bool radiotap_enabled; bool radio_enabled; /* The beacon we are currently using (AP or IBSS mode). * This beacon stuff is protected by the irq_lock. */ struct sk_buff *current_beacon; bool beacon0_uploaded; bool beacon1_uploaded; bool beacon_templates_virgin; /* Never wrote the templates? */ struct work_struct beacon_update_trigger; /* The current QOS parameters for the 4 queues. */ struct b43legacy_qos_params qos_params[B43legacy_QOS_QUEUE_NUM]; /* Packet transmit work */ struct work_struct tx_work; /* Queue of packets to be transmitted. */ struct sk_buff_head tx_queue[B43legacy_QOS_QUEUE_NUM]; /* Flag that implement the queues stopping. */ bool tx_queue_stopped[B43legacy_QOS_QUEUE_NUM]; }; /* Pointers to the firmware data and meta information about it. */ struct b43legacy_firmware { /* Microcode */ const struct firmware *ucode; /* PCM code */ const struct firmware *pcm; /* Initial MMIO values for the firmware */ const struct firmware *initvals; /* Initial MMIO values for the firmware, band-specific */ const struct firmware *initvals_band; /* Firmware revision */ u16 rev; /* Firmware patchlevel */ u16 patch; }; /* Device (802.11 core) initialization status. */ enum { B43legacy_STAT_UNINIT = 0, /* Uninitialized. */ B43legacy_STAT_INITIALIZED = 1, /* Initialized, not yet started. */ B43legacy_STAT_STARTED = 2, /* Up and running. */ }; #define b43legacy_status(wldev) atomic_read(&(wldev)->__init_status) #define b43legacy_set_status(wldev, stat) do { \ atomic_set(&(wldev)->__init_status, (stat)); \ smp_wmb(); \ } while (0) /* *** --- HOW LOCKING WORKS IN B43legacy --- *** * * You should always acquire both, wl->mutex and wl->irq_lock unless: * - You don't need to acquire wl->irq_lock, if the interface is stopped. * - You don't need to acquire wl->mutex in the IRQ handler, IRQ tasklet * and packet TX path (and _ONLY_ there.) */ /* Data structure for one wireless device (802.11 core) */ struct b43legacy_wldev { struct ssb_device *dev; struct b43legacy_wl *wl; /* The device initialization status. * Use b43legacy_status() to query. */ atomic_t __init_status; /* Saved init status for handling suspend. */ int suspend_init_status; bool __using_pio; /* Using pio rather than dma. */ bool bad_frames_preempt;/* Use "Bad Frames Preemption". */ bool dfq_valid; /* Directed frame queue valid (IBSS PS mode, ATIM). */ bool short_preamble; /* TRUE if using short preamble. */ bool radio_hw_enable; /* State of radio hardware enable bit. */ /* PHY/Radio device. */ struct b43legacy_phy phy; union { /* DMA engines. */ struct b43legacy_dma dma; /* PIO engines. */ struct b43legacy_pio pio; }; /* Various statistics about the physical device. */ struct b43legacy_stats stats; /* The device LEDs. */ struct b43legacy_led led_tx; struct b43legacy_led led_rx; struct b43legacy_led led_assoc; struct b43legacy_led led_radio; /* Reason code of the last interrupt. */ u32 irq_reason; u32 dma_reason[6]; /* The currently active generic-interrupt mask. */ u32 irq_mask; /* Link Quality calculation context. */ struct b43legacy_noise_calculation noisecalc; /* if > 0 MAC is suspended. if == 0 MAC is enabled. */ int mac_suspended; /* Interrupt Service Routine tasklet (bottom-half) */ struct tasklet_struct isr_tasklet; /* Periodic tasks */ struct delayed_work periodic_work; unsigned int periodic_state; struct work_struct restart_work; /* encryption/decryption */ u16 ktp; /* Key table pointer */ u8 max_nr_keys; struct b43legacy_key key[58]; /* Firmware data */ struct b43legacy_firmware fw; const struct firmware *fwp; /* needed to pass fw pointer */ /* completion struct for firmware loading */ struct completion fw_load_complete; /* Devicelist in struct b43legacy_wl (all 802.11 cores) */ struct list_head list; /* Debugging stuff follows. */ #ifdef CONFIG_B43LEGACY_DEBUG struct b43legacy_dfsentry *dfsentry; #endif }; static inline struct b43legacy_wl *hw_to_b43legacy_wl(struct ieee80211_hw *hw) { return hw->priv; } /* Helper function, which returns a boolean. * TRUE, if PIO is used; FALSE, if DMA is used. */ #if defined(CONFIG_B43LEGACY_DMA) && defined(CONFIG_B43LEGACY_PIO) static inline int b43legacy_using_pio(struct b43legacy_wldev *dev) { return dev->__using_pio; } #elif defined(CONFIG_B43LEGACY_DMA) static inline int b43legacy_using_pio(struct b43legacy_wldev *dev) { return 0; } #elif defined(CONFIG_B43LEGACY_PIO) static inline int b43legacy_using_pio(struct b43legacy_wldev *dev) { return 1; } #else # error "Using neither DMA nor PIO? Confused..." #endif static inline struct b43legacy_wldev *dev_to_b43legacy_wldev(struct device *dev) { struct ssb_device *ssb_dev = dev_to_ssb_dev(dev); return ssb_get_drvdata(ssb_dev); } /* Is the device operating in a specified mode (IEEE80211_IF_TYPE_XXX). */ static inline int b43legacy_is_mode(struct b43legacy_wl *wl, int type) { return (wl->operating && wl->if_type == type); } static inline bool is_bcm_board_vendor(struct b43legacy_wldev *dev) { return (dev->dev->bus->boardinfo.vendor == PCI_VENDOR_ID_BROADCOM); } static inline u16 b43legacy_read16(struct b43legacy_wldev *dev, u16 offset) { return ssb_read16(dev->dev, offset); } static inline void b43legacy_write16(struct b43legacy_wldev *dev, u16 offset, u16 value) { ssb_write16(dev->dev, offset, value); } static inline u32 b43legacy_read32(struct b43legacy_wldev *dev, u16 offset) { return ssb_read32(dev->dev, offset); } static inline void b43legacy_write32(struct b43legacy_wldev *dev, u16 offset, u32 value) { ssb_write32(dev->dev, offset, value); } static inline struct b43legacy_lopair *b43legacy_get_lopair(struct b43legacy_phy *phy, u16 radio_attenuation, u16 baseband_attenuation) { return phy->_lo_pairs + (radio_attenuation + 14 * (baseband_attenuation / 2)); } /* Message printing */ __printf(2, 3) void b43legacyinfo(struct b43legacy_wl *wl, const char *fmt, ...); __printf(2, 3) void b43legacyerr(struct b43legacy_wl *wl, const char *fmt, ...); __printf(2, 3) void b43legacywarn(struct b43legacy_wl *wl, const char *fmt, ...); #if B43legacy_DEBUG __printf(2, 3) void b43legacydbg(struct b43legacy_wl *wl, const char *fmt, ...); #else /* DEBUG */ # define b43legacydbg(wl, fmt...) do { /* nothing */ } while (0) #endif /* DEBUG */ /* Macros for printing a value in Q5.2 format */ #define Q52_FMT "%u.%u" #define Q52_ARG(q52) ((q52) / 4), (((q52) & 3) * 100 / 4) #endif /* B43legacy_H_ */