// SPDX-License-Identifier: GPL-2.0-only /* * PMC551 PCI Mezzanine Ram Device * * Author: * Mark Ferrell * Copyright 1999,2000 Nortel Networks * * Description: * This driver is intended to support the PMC551 PCI Ram device * from Ramix Inc. The PMC551 is a PMC Mezzanine module for * cPCI embedded systems. The device contains a single SROM * that initially programs the V370PDC chipset onboard the * device, and various banks of DRAM/SDRAM onboard. This driver * implements this PCI Ram device as an MTD (Memory Technology * Device) so that it can be used to hold a file system, or for * added swap space in embedded systems. Since the memory on * this board isn't as fast as main memory we do not try to hook * it into main memory as that would simply reduce performance * on the system. Using it as a block device allows us to use * it as high speed swap or for a high speed disk device of some * sort. Which becomes very useful on diskless systems in the * embedded market I might add. * * Notes: * Due to what I assume is more buggy SROM, the 64M PMC551 I * have available claims that all 4 of its DRAM banks have 64MiB * of ram configured (making a grand total of 256MiB onboard). * This is slightly annoying since the BAR0 size reflects the * aperture size, not the dram size, and the V370PDC supplies no * other method for memory size discovery. This problem is * mostly only relevant when compiled as a module, as the * unloading of the module with an aperture size smaller than * the ram will cause the driver to detect the onboard memory * size to be equal to the aperture size when the module is * reloaded. Soooo, to help, the module supports an msize * option to allow the specification of the onboard memory, and * an asize option, to allow the specification of the aperture * size. The aperture must be equal to or less then the memory * size, the driver will correct this if you screw it up. This * problem is not relevant for compiled in drivers as compiled * in drivers only init once. * * Credits: * Saeed Karamooz of Ramix INC. for the * initial example code of how to initialize this device and for * help with questions I had concerning operation of the device. * * Most of the MTD code for this driver was originally written * for the slram.o module in the MTD drivers package which * allows the mapping of system memory into an MTD device. * Since the PMC551 memory module is accessed in the same * fashion as system memory, the slram.c code became a very nice * fit to the needs of this driver. All we added was PCI * detection/initialization to the driver and automatically figure * out the size via the PCI detection.o, later changes by Corey * Minyard set up the card to utilize a 1M sliding apature. * * Corey Minyard * * Modified driver to utilize a sliding aperture instead of * mapping all memory into kernel space which turned out to * be very wasteful. * * Located a bug in the SROM's initialization sequence that * made the memory unusable, added a fix to code to touch up * the DRAM some. * * Bugs/FIXMEs: * * MUST fix the init function to not spin on a register * waiting for it to set .. this does not safely handle busted * devices that never reset the register correctly which will * cause the system to hang w/ a reboot being the only chance at * recover. [sort of fixed, could be better] * * Add I2C handling of the SROM so we can read the SROM's information * about the aperture size. This should always accurately reflect the * onboard memory size. * * Comb the init routine. It's still a bit cludgy on a few things. */ #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #define PMC551_VERSION \ "Ramix PMC551 PCI Mezzanine Ram Driver. (C) 1999,2000 Nortel Networks.\n" #define PCI_VENDOR_ID_V3_SEMI 0x11b0 #define PCI_DEVICE_ID_V3_SEMI_V370PDC 0x0200 #define PMC551_PCI_MEM_MAP0 0x50 #define PMC551_PCI_MEM_MAP1 0x54 #define PMC551_PCI_MEM_MAP_MAP_ADDR_MASK 0x3ff00000 #define PMC551_PCI_MEM_MAP_APERTURE_MASK 0x000000f0 #define PMC551_PCI_MEM_MAP_REG_EN 0x00000002 #define PMC551_PCI_MEM_MAP_ENABLE 0x00000001 #define PMC551_SDRAM_MA 0x60 #define PMC551_SDRAM_CMD 0x62 #define PMC551_DRAM_CFG 0x64 #define PMC551_SYS_CTRL_REG 0x78 #define PMC551_DRAM_BLK0 0x68 #define PMC551_DRAM_BLK1 0x6c #define PMC551_DRAM_BLK2 0x70 #define PMC551_DRAM_BLK3 0x74 #define PMC551_DRAM_BLK_GET_SIZE(x) (524288 << ((x >> 4) & 0x0f)) #define PMC551_DRAM_BLK_SET_COL_MUX(x, v) (((x) & ~0x00007000) | (((v) & 0x7) << 12)) #define PMC551_DRAM_BLK_SET_ROW_MUX(x, v) (((x) & ~0x00000f00) | (((v) & 0xf) << 8)) struct mypriv { struct pci_dev *dev; u_char *start; u32 base_map0; u32 curr_map0; u32 asize; struct mtd_info *nextpmc551; }; static struct mtd_info *pmc551list; static int pmc551_point(struct mtd_info *mtd, loff_t from, size_t len, size_t *retlen, void **virt, resource_size_t *phys); static int pmc551_erase(struct mtd_info *mtd, struct erase_info *instr) { struct mypriv *priv = mtd->priv; u32 soff_hi; /* start address offset hi */ u32 eoff_hi, eoff_lo; /* end address offset hi/lo */ unsigned long end; u_char *ptr; size_t retlen; #ifdef CONFIG_MTD_PMC551_DEBUG printk(KERN_DEBUG "pmc551_erase(pos:%ld, len:%ld)\n", (long)instr->addr, (long)instr->len); #endif end = instr->addr + instr->len - 1; eoff_hi = end & ~(priv->asize - 1); soff_hi = instr->addr & ~(priv->asize - 1); eoff_lo = end & (priv->asize - 1); pmc551_point(mtd, instr->addr, instr->len, &retlen, (void **)&ptr, NULL); if (soff_hi == eoff_hi || mtd->size == priv->asize) { /* The whole thing fits within one access, so just one shot will do it. */ memset(ptr, 0xff, instr->len); } else { /* We have to do multiple writes to get all the data written. */ while (soff_hi != eoff_hi) { #ifdef CONFIG_MTD_PMC551_DEBUG printk(KERN_DEBUG "pmc551_erase() soff_hi: %ld, " "eoff_hi: %ld\n", (long)soff_hi, (long)eoff_hi); #endif memset(ptr, 0xff, priv->asize); if (soff_hi + priv->asize >= mtd->size) { goto out; } soff_hi += priv->asize; pmc551_point(mtd, (priv->base_map0 | soff_hi), priv->asize, &retlen, (void **)&ptr, NULL); } memset(ptr, 0xff, eoff_lo); } out: #ifdef CONFIG_MTD_PMC551_DEBUG printk(KERN_DEBUG "pmc551_erase() done\n"); #endif return 0; } static int pmc551_point(struct mtd_info *mtd, loff_t from, size_t len, size_t *retlen, void **virt, resource_size_t *phys) { struct mypriv *priv = mtd->priv; u32 soff_hi; u32 soff_lo; #ifdef CONFIG_MTD_PMC551_DEBUG printk(KERN_DEBUG "pmc551_point(%ld, %ld)\n", (long)from, (long)len); #endif soff_hi = from & ~(priv->asize - 1); soff_lo = from & (priv->asize - 1); /* Cheap hack optimization */ if (priv->curr_map0 != from) { pci_write_config_dword(priv->dev, PMC551_PCI_MEM_MAP0, (priv->base_map0 | soff_hi)); priv->curr_map0 = soff_hi; } *virt = priv->start + soff_lo; *retlen = len; return 0; } static int pmc551_unpoint(struct mtd_info *mtd, loff_t from, size_t len) { #ifdef CONFIG_MTD_PMC551_DEBUG printk(KERN_DEBUG "pmc551_unpoint()\n"); #endif return 0; } static int pmc551_read(struct mtd_info *mtd, loff_t from, size_t len, size_t * retlen, u_char * buf) { struct mypriv *priv = mtd->priv; u32 soff_hi; /* start address offset hi */ u32 eoff_hi, eoff_lo; /* end address offset hi/lo */ unsigned long end; u_char *ptr; u_char *copyto = buf; #ifdef CONFIG_MTD_PMC551_DEBUG printk(KERN_DEBUG "pmc551_read(pos:%ld, len:%ld) asize: %ld\n", (long)from, (long)len, (long)priv->asize); #endif end = from + len - 1; soff_hi = from & ~(priv->asize - 1); eoff_hi = end & ~(priv->asize - 1); eoff_lo = end & (priv->asize - 1); pmc551_point(mtd, from, len, retlen, (void **)&ptr, NULL); if (soff_hi == eoff_hi) { /* The whole thing fits within one access, so just one shot will do it. */ memcpy(copyto, ptr, len); copyto += len; } else { /* We have to do multiple writes to get all the data written. */ while (soff_hi != eoff_hi) { #ifdef CONFIG_MTD_PMC551_DEBUG printk(KERN_DEBUG "pmc551_read() soff_hi: %ld, " "eoff_hi: %ld\n", (long)soff_hi, (long)eoff_hi); #endif memcpy(copyto, ptr, priv->asize); copyto += priv->asize; if (soff_hi + priv->asize >= mtd->size) { goto out; } soff_hi += priv->asize; pmc551_point(mtd, soff_hi, priv->asize, retlen, (void **)&ptr, NULL); } memcpy(copyto, ptr, eoff_lo); copyto += eoff_lo; } out: #ifdef CONFIG_MTD_PMC551_DEBUG printk(KERN_DEBUG "pmc551_read() done\n"); #endif *retlen = copyto - buf; return 0; } static int pmc551_write(struct mtd_info *mtd, loff_t to, size_t len, size_t * retlen, const u_char * buf) { struct mypriv *priv = mtd->priv; u32 soff_hi; /* start address offset hi */ u32 eoff_hi, eoff_lo; /* end address offset hi/lo */ unsigned long end; u_char *ptr; const u_char *copyfrom = buf; #ifdef CONFIG_MTD_PMC551_DEBUG printk(KERN_DEBUG "pmc551_write(pos:%ld, len:%ld) asize:%ld\n", (long)to, (long)len, (long)priv->asize); #endif end = to + len - 1; soff_hi = to & ~(priv->asize - 1); eoff_hi = end & ~(priv->asize - 1); eoff_lo = end & (priv->asize - 1); pmc551_point(mtd, to, len, retlen, (void **)&ptr, NULL); if (soff_hi == eoff_hi) { /* The whole thing fits within one access, so just one shot will do it. */ memcpy(ptr, copyfrom, len); copyfrom += len; } else { /* We have to do multiple writes to get all the data written. */ while (soff_hi != eoff_hi) { #ifdef CONFIG_MTD_PMC551_DEBUG printk(KERN_DEBUG "pmc551_write() soff_hi: %ld, " "eoff_hi: %ld\n", (long)soff_hi, (long)eoff_hi); #endif memcpy(ptr, copyfrom, priv->asize); copyfrom += priv->asize; if (soff_hi >= mtd->size) { goto out; } soff_hi += priv->asize; pmc551_point(mtd, soff_hi, priv->asize, retlen, (void **)&ptr, NULL); } memcpy(ptr, copyfrom, eoff_lo); copyfrom += eoff_lo; } out: #ifdef CONFIG_MTD_PMC551_DEBUG printk(KERN_DEBUG "pmc551_write() done\n"); #endif *retlen = copyfrom - buf; return 0; } /* * Fixup routines for the V370PDC * PCI device ID 0x020011b0 * * This function basically kick starts the DRAM oboard the card and gets it * ready to be used. Before this is done the device reads VERY erratic, so * much that it can crash the Linux 2.2.x series kernels when a user cat's * /proc/pci .. though that is mainly a kernel bug in handling the PCI DEVSEL * register. FIXME: stop spinning on registers .. must implement a timeout * mechanism * returns the size of the memory region found. */ static int __init fixup_pmc551(struct pci_dev *dev) { #ifdef CONFIG_MTD_PMC551_BUGFIX u32 dram_data; #endif u32 size, dcmd, cfg, dtmp; u16 cmd, tmp, i; u8 bcmd, counter; /* Sanity Check */ if (!dev) { return -ENODEV; } /* * Attempt to reset the card * FIXME: Stop Spinning registers */ counter = 0; /* unlock registers */ pci_write_config_byte(dev, PMC551_SYS_CTRL_REG, 0xA5); /* read in old data */ pci_read_config_byte(dev, PMC551_SYS_CTRL_REG, &bcmd); /* bang the reset line up and down for a few */ for (i = 0; i < 10; i++) { counter = 0; bcmd &= ~0x80; while (counter++ < 100) { pci_write_config_byte(dev, PMC551_SYS_CTRL_REG, bcmd); } counter = 0; bcmd |= 0x80; while (counter++ < 100) { pci_write_config_byte(dev, PMC551_SYS_CTRL_REG, bcmd); } } bcmd |= (0x40 | 0x20); pci_write_config_byte(dev, PMC551_SYS_CTRL_REG, bcmd); /* * Take care and turn off the memory on the device while we * tweak the configurations */ pci_read_config_word(dev, PCI_COMMAND, &cmd); tmp = cmd & ~(PCI_COMMAND_IO | PCI_COMMAND_MEMORY); pci_write_config_word(dev, PCI_COMMAND, tmp); /* * Disable existing aperture before probing memory size */ pci_read_config_dword(dev, PMC551_PCI_MEM_MAP0, &dcmd); dtmp = (dcmd | PMC551_PCI_MEM_MAP_ENABLE | PMC551_PCI_MEM_MAP_REG_EN); pci_write_config_dword(dev, PMC551_PCI_MEM_MAP0, dtmp); /* * Grab old BAR0 config so that we can figure out memory size * This is another bit of kludge going on. The reason for the * redundancy is I am hoping to retain the original configuration * previously assigned to the card by the BIOS or some previous * fixup routine in the kernel. So we read the old config into cfg, * then write all 1's to the memory space, read back the result into * "size", and then write back all the old config. */ pci_read_config_dword(dev, PCI_BASE_ADDRESS_0, &cfg); #ifndef CONFIG_MTD_PMC551_BUGFIX pci_write_config_dword(dev, PCI_BASE_ADDRESS_0, ~0); pci_read_config_dword(dev, PCI_BASE_ADDRESS_0, &size); size = (size & PCI_BASE_ADDRESS_MEM_MASK); size &= ~(size - 1); pci_write_config_dword(dev, PCI_BASE_ADDRESS_0, cfg); #else /* * Get the size of the memory by reading all the DRAM size values * and adding them up. * * KLUDGE ALERT: the boards we are using have invalid column and * row mux values. We fix them here, but this will break other * memory configurations. */ pci_read_config_dword(dev, PMC551_DRAM_BLK0, &dram_data); size = PMC551_DRAM_BLK_GET_SIZE(dram_data); dram_data = PMC551_DRAM_BLK_SET_COL_MUX(dram_data, 0x5); dram_data = PMC551_DRAM_BLK_SET_ROW_MUX(dram_data, 0x9); pci_write_config_dword(dev, PMC551_DRAM_BLK0, dram_data); pci_read_config_dword(dev, PMC551_DRAM_BLK1, &dram_data); size += PMC551_DRAM_BLK_GET_SIZE(dram_data); dram_data = PMC551_DRAM_BLK_SET_COL_MUX(dram_data, 0x5); dram_data = PMC551_DRAM_BLK_SET_ROW_MUX(dram_data, 0x9); pci_write_config_dword(dev, PMC551_DRAM_BLK1, dram_data); pci_read_config_dword(dev, PMC551_DRAM_BLK2, &dram_data); size += PMC551_DRAM_BLK_GET_SIZE(dram_data); dram_data = PMC551_DRAM_BLK_SET_COL_MUX(dram_data, 0x5); dram_data = PMC551_DRAM_BLK_SET_ROW_MUX(dram_data, 0x9); pci_write_config_dword(dev, PMC551_DRAM_BLK2, dram_data); pci_read_config_dword(dev, PMC551_DRAM_BLK3, &dram_data); size += PMC551_DRAM_BLK_GET_SIZE(dram_data); dram_data = PMC551_DRAM_BLK_SET_COL_MUX(dram_data, 0x5); dram_data = PMC551_DRAM_BLK_SET_ROW_MUX(dram_data, 0x9); pci_write_config_dword(dev, PMC551_DRAM_BLK3, dram_data); /* * Oops .. something went wrong */ if ((size &= PCI_BASE_ADDRESS_MEM_MASK) == 0) { return -ENODEV; } #endif /* CONFIG_MTD_PMC551_BUGFIX */ if ((cfg & PCI_BASE_ADDRESS_SPACE) != PCI_BASE_ADDRESS_SPACE_MEMORY) { return -ENODEV; } /* * Precharge Dram */ pci_write_config_word(dev, PMC551_SDRAM_MA, 0x0400); pci_write_config_word(dev, PMC551_SDRAM_CMD, 0x00bf); /* * Wait until command has gone through * FIXME: register spinning issue */ do { pci_read_config_word(dev, PMC551_SDRAM_CMD, &cmd); if (counter++ > 100) break; } while ((PCI_COMMAND_IO) & cmd); /* * Turn on auto refresh * The loop is taken directly from Ramix's example code. I assume that * this must be held high for some duration of time, but I can find no * documentation refrencing the reasons why. */ for (i = 1; i <= 8; i++) { pci_write_config_word(dev, PMC551_SDRAM_CMD, 0x0df); /* * Make certain command has gone through * FIXME: register spinning issue */ counter = 0; do { pci_read_config_word(dev, PMC551_SDRAM_CMD, &cmd); if (counter++ > 100) break; } while ((PCI_COMMAND_IO) & cmd); } pci_write_config_word(dev, PMC551_SDRAM_MA, 0x0020); pci_write_config_word(dev, PMC551_SDRAM_CMD, 0x0ff); /* * Wait until command completes * FIXME: register spinning issue */ counter = 0; do { pci_read_config_word(dev, PMC551_SDRAM_CMD, &cmd); if (counter++ > 100) break; } while ((PCI_COMMAND_IO) & cmd); pci_read_config_dword(dev, PMC551_DRAM_CFG, &dcmd); dcmd |= 0x02000000; pci_write_config_dword(dev, PMC551_DRAM_CFG, dcmd); /* * Check to make certain fast back-to-back, if not * then set it so */ pci_read_config_word(dev, PCI_STATUS, &cmd); if ((cmd & PCI_COMMAND_FAST_BACK) == 0) { cmd |= PCI_COMMAND_FAST_BACK; pci_write_config_word(dev, PCI_STATUS, cmd); } /* * Check to make certain the DEVSEL is set correctly, this device * has a tendency to assert DEVSEL and TRDY when a write is performed * to the memory when memory is read-only */ if ((cmd & PCI_STATUS_DEVSEL_MASK) != 0x0) { cmd &= ~PCI_STATUS_DEVSEL_MASK; pci_write_config_word(dev, PCI_STATUS, cmd); } /* * Set to be prefetchable and put everything back based on old cfg. * it's possible that the reset of the V370PDC nuked the original * setup */ /* cfg |= PCI_BASE_ADDRESS_MEM_PREFETCH; pci_write_config_dword( dev, PCI_BASE_ADDRESS_0, cfg ); */ /* * Turn PCI memory and I/O bus access back on */ pci_write_config_word(dev, PCI_COMMAND, PCI_COMMAND_MEMORY | PCI_COMMAND_IO); #ifdef CONFIG_MTD_PMC551_DEBUG /* * Some screen fun */ printk(KERN_DEBUG "pmc551: %d%sB (0x%x) of %sprefetchable memory at " "0x%llx\n", (size < 1024) ? size : (size < 1048576) ? size >> 10 : size >> 20, (size < 1024) ? "" : (size < 1048576) ? "Ki" : "Mi", size, ((dcmd & (0x1 << 3)) == 0) ? "non-" : "", (unsigned long long)pci_resource_start(dev, 0)); /* * Check to see the state of the memory */ pci_read_config_dword(dev, PMC551_DRAM_BLK0, &dcmd); printk(KERN_DEBUG "pmc551: DRAM_BLK0 Flags: %s,%s\n" "pmc551: DRAM_BLK0 Size: %d at %d\n" "pmc551: DRAM_BLK0 Row MUX: %d, Col MUX: %d\n", (((0x1 << 1) & dcmd) == 0) ? "RW" : "RO", (((0x1 << 0) & dcmd) == 0) ? "Off" : "On", PMC551_DRAM_BLK_GET_SIZE(dcmd), ((dcmd >> 20) & 0x7FF), ((dcmd >> 13) & 0x7), ((dcmd >> 9) & 0xF)); pci_read_config_dword(dev, PMC551_DRAM_BLK1, &dcmd); printk(KERN_DEBUG "pmc551: DRAM_BLK1 Flags: %s,%s\n" "pmc551: DRAM_BLK1 Size: %d at %d\n" "pmc551: DRAM_BLK1 Row MUX: %d, Col MUX: %d\n", (((0x1 << 1) & dcmd) == 0) ? "RW" : "RO", (((0x1 << 0) & dcmd) == 0) ? "Off" : "On", PMC551_DRAM_BLK_GET_SIZE(dcmd), ((dcmd >> 20) & 0x7FF), ((dcmd >> 13) & 0x7), ((dcmd >> 9) & 0xF)); pci_read_config_dword(dev, PMC551_DRAM_BLK2, &dcmd); printk(KERN_DEBUG "pmc551: DRAM_BLK2 Flags: %s,%s\n" "pmc551: DRAM_BLK2 Size: %d at %d\n" "pmc551: DRAM_BLK2 Row MUX: %d, Col MUX: %d\n", (((0x1 << 1) & dcmd) == 0) ? "RW" : "RO", (((0x1 << 0) & dcmd) == 0) ? "Off" : "On", PMC551_DRAM_BLK_GET_SIZE(dcmd), ((dcmd >> 20) & 0x7FF), ((dcmd >> 13) & 0x7), ((dcmd >> 9) & 0xF)); pci_read_config_dword(dev, PMC551_DRAM_BLK3, &dcmd); printk(KERN_DEBUG "pmc551: DRAM_BLK3 Flags: %s,%s\n" "pmc551: DRAM_BLK3 Size: %d at %d\n" "pmc551: DRAM_BLK3 Row MUX: %d, Col MUX: %d\n", (((0x1 << 1) & dcmd) == 0) ? "RW" : "RO", (((0x1 << 0) & dcmd) == 0) ? "Off" : "On", PMC551_DRAM_BLK_GET_SIZE(dcmd), ((dcmd >> 20) & 0x7FF), ((dcmd >> 13) & 0x7), ((dcmd >> 9) & 0xF)); pci_read_config_word(dev, PCI_COMMAND, &cmd); printk(KERN_DEBUG "pmc551: Memory Access %s\n", (((0x1 << 1) & cmd) == 0) ? "off" : "on"); printk(KERN_DEBUG "pmc551: I/O Access %s\n", (((0x1 << 0) & cmd) == 0) ? "off" : "on"); pci_read_config_word(dev, PCI_STATUS, &cmd); printk(KERN_DEBUG "pmc551: Devsel %s\n", ((PCI_STATUS_DEVSEL_MASK & cmd) == 0x000) ? "Fast" : ((PCI_STATUS_DEVSEL_MASK & cmd) == 0x200) ? "Medium" : ((PCI_STATUS_DEVSEL_MASK & cmd) == 0x400) ? "Slow" : "Invalid"); printk(KERN_DEBUG "pmc551: %sFast Back-to-Back\n", ((PCI_COMMAND_FAST_BACK & cmd) == 0) ? "Not " : ""); pci_read_config_byte(dev, PMC551_SYS_CTRL_REG, &bcmd); printk(KERN_DEBUG "pmc551: EEPROM is under %s control\n" "pmc551: System Control Register is %slocked to PCI access\n" "pmc551: System Control Register is %slocked to EEPROM access\n", (bcmd & 0x1) ? "software" : "hardware", (bcmd & 0x20) ? "" : "un", (bcmd & 0x40) ? "" : "un"); #endif return size; } /* * Kernel version specific module stuffages */ MODULE_LICENSE("GPL"); MODULE_AUTHOR("Mark Ferrell "); MODULE_DESCRIPTION(PMC551_VERSION); /* * Stuff these outside the ifdef so as to not bust compiled in driver support */ static int msize = 0; static int asize = 0; module_param(msize, int, 0); MODULE_PARM_DESC(msize, "memory size in MiB [1 - 1024]"); module_param(asize, int, 0); MODULE_PARM_DESC(asize, "aperture size, must be <= memsize [1-1024]"); /* * PMC551 Card Initialization */ static int __init init_pmc551(void) { struct pci_dev *PCI_Device = NULL; struct mypriv *priv; int found = 0; struct mtd_info *mtd; int length = 0; if (msize) { msize = (1 << (ffs(msize) - 1)) << 20; if (msize > (1 << 30)) { printk(KERN_NOTICE "pmc551: Invalid memory size [%d]\n", msize); return -EINVAL; } } if (asize) { asize = (1 << (ffs(asize) - 1)) << 20; if (asize > (1 << 30)) { printk(KERN_NOTICE "pmc551: Invalid aperture size " "[%d]\n", asize); return -EINVAL; } } printk(KERN_INFO PMC551_VERSION); /* * PCU-bus chipset probe. */ for (;;) { if ((PCI_Device = pci_get_device(PCI_VENDOR_ID_V3_SEMI, PCI_DEVICE_ID_V3_SEMI_V370PDC, PCI_Device)) == NULL) { break; } printk(KERN_NOTICE "pmc551: Found PCI V370PDC at 0x%llx\n", (unsigned long long)pci_resource_start(PCI_Device, 0)); /* * The PMC551 device acts VERY weird if you don't init it * first. i.e. it will not correctly report devsel. If for * some reason the sdram is in a wrote-protected state the * device will DEVSEL when it is written to causing problems * with the oldproc.c driver in * some kernels (2.2.*) */ if ((length = fixup_pmc551(PCI_Device)) <= 0) { printk(KERN_NOTICE "pmc551: Cannot init SDRAM\n"); break; } /* * This is needed until the driver is capable of reading the * onboard I2C SROM to discover the "real" memory size. */ if (msize) { length = msize; printk(KERN_NOTICE "pmc551: Using specified memory " "size 0x%x\n", length); } else { msize = length; } mtd = kzalloc(sizeof(struct mtd_info), GFP_KERNEL); if (!mtd) break; priv = kzalloc(sizeof(struct mypriv), GFP_KERNEL); if (!priv) { kfree(mtd); break; } mtd->priv = priv; priv->dev = PCI_Device; if (asize > length) { printk(KERN_NOTICE "pmc551: reducing aperture size to " "fit %dM\n", length >> 20); priv->asize = asize = length; } else if (asize == 0 || asize == length) { printk(KERN_NOTICE "pmc551: Using existing aperture " "size %dM\n", length >> 20); priv->asize = asize = length; } else { printk(KERN_NOTICE "pmc551: Using specified aperture " "size %dM\n", asize >> 20); priv->asize = asize; } priv->start = pci_iomap(PCI_Device, 0, priv->asize); if (!priv->start) { printk(KERN_NOTICE "pmc551: Unable to map IO space\n"); kfree(mtd->priv); kfree(mtd); break; } #ifdef CONFIG_MTD_PMC551_DEBUG printk(KERN_DEBUG "pmc551: setting aperture to %d\n", ffs(priv->asize >> 20) - 1); #endif priv->base_map0 = (PMC551_PCI_MEM_MAP_REG_EN | PMC551_PCI_MEM_MAP_ENABLE | (ffs(priv->asize >> 20) - 1) << 4); priv->curr_map0 = priv->base_map0; pci_write_config_dword(priv->dev, PMC551_PCI_MEM_MAP0, priv->curr_map0); #ifdef CONFIG_MTD_PMC551_DEBUG printk(KERN_DEBUG "pmc551: aperture set to %d\n", (priv->base_map0 & 0xF0) >> 4); #endif mtd->size = msize; mtd->flags = MTD_CAP_RAM; mtd->_erase = pmc551_erase; mtd->_read = pmc551_read; mtd->_write = pmc551_write; mtd->_point = pmc551_point; mtd->_unpoint = pmc551_unpoint; mtd->type = MTD_RAM; mtd->name = "PMC551 RAM board"; mtd->erasesize = 0x10000; mtd->writesize = 1; mtd->owner = THIS_MODULE; if (mtd_device_register(mtd, NULL, 0)) { printk(KERN_NOTICE "pmc551: Failed to register new device\n"); pci_iounmap(PCI_Device, priv->start); kfree(mtd->priv); kfree(mtd); break; } /* Keep a reference as the mtd_device_register worked */ pci_dev_get(PCI_Device); printk(KERN_NOTICE "Registered pmc551 memory device.\n"); printk(KERN_NOTICE "Mapped %dMiB of memory from 0x%p to 0x%p\n", priv->asize >> 20, priv->start, priv->start + priv->asize); printk(KERN_NOTICE "Total memory is %d%sB\n", (length < 1024) ? length : (length < 1048576) ? length >> 10 : length >> 20, (length < 1024) ? "" : (length < 1048576) ? "Ki" : "Mi"); priv->nextpmc551 = pmc551list; pmc551list = mtd; found++; } /* Exited early, reference left over */ pci_dev_put(PCI_Device); if (!pmc551list) { printk(KERN_NOTICE "pmc551: not detected\n"); return -ENODEV; } else { printk(KERN_NOTICE "pmc551: %d pmc551 devices loaded\n", found); return 0; } } /* * PMC551 Card Cleanup */ static void __exit cleanup_pmc551(void) { int found = 0; struct mtd_info *mtd; struct mypriv *priv; while ((mtd = pmc551list)) { priv = mtd->priv; pmc551list = priv->nextpmc551; if (priv->start) { printk(KERN_DEBUG "pmc551: unmapping %dMiB starting at " "0x%p\n", priv->asize >> 20, priv->start); pci_iounmap(priv->dev, priv->start); } pci_dev_put(priv->dev); kfree(mtd->priv); mtd_device_unregister(mtd); kfree(mtd); found++; } printk(KERN_NOTICE "pmc551: %d pmc551 devices unloaded\n", found); } module_init(init_pmc551); module_exit(cleanup_pmc551);