// SPDX-License-Identifier: GPL-2.0 /* * ov772x Camera Driver * * Copyright (C) 2017 Jacopo Mondi * * Copyright (C) 2008 Renesas Solutions Corp. * Kuninori Morimoto * * Based on ov7670 and soc_camera_platform driver, * * Copyright 2006-7 Jonathan Corbet * Copyright (C) 2008 Magnus Damm * Copyright (C) 2008, Guennadi Liakhovetski */ #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include /* * register offset */ #define GAIN 0x00 /* AGC - Gain control gain setting */ #define BLUE 0x01 /* AWB - Blue channel gain setting */ #define RED 0x02 /* AWB - Red channel gain setting */ #define GREEN 0x03 /* AWB - Green channel gain setting */ #define COM1 0x04 /* Common control 1 */ #define BAVG 0x05 /* U/B Average Level */ #define GAVG 0x06 /* Y/Gb Average Level */ #define RAVG 0x07 /* V/R Average Level */ #define AECH 0x08 /* Exposure Value - AEC MSBs */ #define COM2 0x09 /* Common control 2 */ #define PID 0x0A /* Product ID Number MSB */ #define VER 0x0B /* Product ID Number LSB */ #define COM3 0x0C /* Common control 3 */ #define COM4 0x0D /* Common control 4 */ #define COM5 0x0E /* Common control 5 */ #define COM6 0x0F /* Common control 6 */ #define AEC 0x10 /* Exposure Value */ #define CLKRC 0x11 /* Internal clock */ #define COM7 0x12 /* Common control 7 */ #define COM8 0x13 /* Common control 8 */ #define COM9 0x14 /* Common control 9 */ #define COM10 0x15 /* Common control 10 */ #define REG16 0x16 /* Register 16 */ #define HSTART 0x17 /* Horizontal sensor size */ #define HSIZE 0x18 /* Horizontal frame (HREF column) end high 8-bit */ #define VSTART 0x19 /* Vertical frame (row) start high 8-bit */ #define VSIZE 0x1A /* Vertical sensor size */ #define PSHFT 0x1B /* Data format - pixel delay select */ #define MIDH 0x1C /* Manufacturer ID byte - high */ #define MIDL 0x1D /* Manufacturer ID byte - low */ #define LAEC 0x1F /* Fine AEC value */ #define COM11 0x20 /* Common control 11 */ #define BDBASE 0x22 /* Banding filter Minimum AEC value */ #define DBSTEP 0x23 /* Banding filter Maximum Setp */ #define AEW 0x24 /* AGC/AEC - Stable operating region (upper limit) */ #define AEB 0x25 /* AGC/AEC - Stable operating region (lower limit) */ #define VPT 0x26 /* AGC/AEC Fast mode operating region */ #define REG28 0x28 /* Register 28 */ #define HOUTSIZE 0x29 /* Horizontal data output size MSBs */ #define EXHCH 0x2A /* Dummy pixel insert MSB */ #define EXHCL 0x2B /* Dummy pixel insert LSB */ #define VOUTSIZE 0x2C /* Vertical data output size MSBs */ #define ADVFL 0x2D /* LSB of insert dummy lines in Vertical direction */ #define ADVFH 0x2E /* MSG of insert dummy lines in Vertical direction */ #define YAVE 0x2F /* Y/G Channel Average value */ #define LUMHTH 0x30 /* Histogram AEC/AGC Luminance high level threshold */ #define LUMLTH 0x31 /* Histogram AEC/AGC Luminance low level threshold */ #define HREF 0x32 /* Image start and size control */ #define DM_LNL 0x33 /* Dummy line low 8 bits */ #define DM_LNH 0x34 /* Dummy line high 8 bits */ #define ADOFF_B 0x35 /* AD offset compensation value for B channel */ #define ADOFF_R 0x36 /* AD offset compensation value for R channel */ #define ADOFF_GB 0x37 /* AD offset compensation value for Gb channel */ #define ADOFF_GR 0x38 /* AD offset compensation value for Gr channel */ #define OFF_B 0x39 /* Analog process B channel offset value */ #define OFF_R 0x3A /* Analog process R channel offset value */ #define OFF_GB 0x3B /* Analog process Gb channel offset value */ #define OFF_GR 0x3C /* Analog process Gr channel offset value */ #define COM12 0x3D /* Common control 12 */ #define COM13 0x3E /* Common control 13 */ #define COM14 0x3F /* Common control 14 */ #define COM15 0x40 /* Common control 15*/ #define COM16 0x41 /* Common control 16 */ #define TGT_B 0x42 /* BLC blue channel target value */ #define TGT_R 0x43 /* BLC red channel target value */ #define TGT_GB 0x44 /* BLC Gb channel target value */ #define TGT_GR 0x45 /* BLC Gr channel target value */ /* for ov7720 */ #define LCC0 0x46 /* Lens correction control 0 */ #define LCC1 0x47 /* Lens correction option 1 - X coordinate */ #define LCC2 0x48 /* Lens correction option 2 - Y coordinate */ #define LCC3 0x49 /* Lens correction option 3 */ #define LCC4 0x4A /* Lens correction option 4 - radius of the circular */ #define LCC5 0x4B /* Lens correction option 5 */ #define LCC6 0x4C /* Lens correction option 6 */ /* for ov7725 */ #define LC_CTR 0x46 /* Lens correction control */ #define LC_XC 0x47 /* X coordinate of lens correction center relative */ #define LC_YC 0x48 /* Y coordinate of lens correction center relative */ #define LC_COEF 0x49 /* Lens correction coefficient */ #define LC_RADI 0x4A /* Lens correction radius */ #define LC_COEFB 0x4B /* Lens B channel compensation coefficient */ #define LC_COEFR 0x4C /* Lens R channel compensation coefficient */ #define FIXGAIN 0x4D /* Analog fix gain amplifer */ #define AREF0 0x4E /* Sensor reference control */ #define AREF1 0x4F /* Sensor reference current control */ #define AREF2 0x50 /* Analog reference control */ #define AREF3 0x51 /* ADC reference control */ #define AREF4 0x52 /* ADC reference control */ #define AREF5 0x53 /* ADC reference control */ #define AREF6 0x54 /* Analog reference control */ #define AREF7 0x55 /* Analog reference control */ #define UFIX 0x60 /* U channel fixed value output */ #define VFIX 0x61 /* V channel fixed value output */ #define AWBB_BLK 0x62 /* AWB option for advanced AWB */ #define AWB_CTRL0 0x63 /* AWB control byte 0 */ #define DSP_CTRL1 0x64 /* DSP control byte 1 */ #define DSP_CTRL2 0x65 /* DSP control byte 2 */ #define DSP_CTRL3 0x66 /* DSP control byte 3 */ #define DSP_CTRL4 0x67 /* DSP control byte 4 */ #define AWB_BIAS 0x68 /* AWB BLC level clip */ #define AWB_CTRL1 0x69 /* AWB control 1 */ #define AWB_CTRL2 0x6A /* AWB control 2 */ #define AWB_CTRL3 0x6B /* AWB control 3 */ #define AWB_CTRL4 0x6C /* AWB control 4 */ #define AWB_CTRL5 0x6D /* AWB control 5 */ #define AWB_CTRL6 0x6E /* AWB control 6 */ #define AWB_CTRL7 0x6F /* AWB control 7 */ #define AWB_CTRL8 0x70 /* AWB control 8 */ #define AWB_CTRL9 0x71 /* AWB control 9 */ #define AWB_CTRL10 0x72 /* AWB control 10 */ #define AWB_CTRL11 0x73 /* AWB control 11 */ #define AWB_CTRL12 0x74 /* AWB control 12 */ #define AWB_CTRL13 0x75 /* AWB control 13 */ #define AWB_CTRL14 0x76 /* AWB control 14 */ #define AWB_CTRL15 0x77 /* AWB control 15 */ #define AWB_CTRL16 0x78 /* AWB control 16 */ #define AWB_CTRL17 0x79 /* AWB control 17 */ #define AWB_CTRL18 0x7A /* AWB control 18 */ #define AWB_CTRL19 0x7B /* AWB control 19 */ #define AWB_CTRL20 0x7C /* AWB control 20 */ #define AWB_CTRL21 0x7D /* AWB control 21 */ #define GAM1 0x7E /* Gamma Curve 1st segment input end point */ #define GAM2 0x7F /* Gamma Curve 2nd segment input end point */ #define GAM3 0x80 /* Gamma Curve 3rd segment input end point */ #define GAM4 0x81 /* Gamma Curve 4th segment input end point */ #define GAM5 0x82 /* Gamma Curve 5th segment input end point */ #define GAM6 0x83 /* Gamma Curve 6th segment input end point */ #define GAM7 0x84 /* Gamma Curve 7th segment input end point */ #define GAM8 0x85 /* Gamma Curve 8th segment input end point */ #define GAM9 0x86 /* Gamma Curve 9th segment input end point */ #define GAM10 0x87 /* Gamma Curve 10th segment input end point */ #define GAM11 0x88 /* Gamma Curve 11th segment input end point */ #define GAM12 0x89 /* Gamma Curve 12th segment input end point */ #define GAM13 0x8A /* Gamma Curve 13th segment input end point */ #define GAM14 0x8B /* Gamma Curve 14th segment input end point */ #define GAM15 0x8C /* Gamma Curve 15th segment input end point */ #define SLOP 0x8D /* Gamma curve highest segment slope */ #define DNSTH 0x8E /* De-noise threshold */ #define EDGE_STRNGT 0x8F /* Edge strength control when manual mode */ #define EDGE_TRSHLD 0x90 /* Edge threshold control when manual mode */ #define DNSOFF 0x91 /* Auto De-noise threshold control */ #define EDGE_UPPER 0x92 /* Edge strength upper limit when Auto mode */ #define EDGE_LOWER 0x93 /* Edge strength lower limit when Auto mode */ #define MTX1 0x94 /* Matrix coefficient 1 */ #define MTX2 0x95 /* Matrix coefficient 2 */ #define MTX3 0x96 /* Matrix coefficient 3 */ #define MTX4 0x97 /* Matrix coefficient 4 */ #define MTX5 0x98 /* Matrix coefficient 5 */ #define MTX6 0x99 /* Matrix coefficient 6 */ #define MTX_CTRL 0x9A /* Matrix control */ #define BRIGHT 0x9B /* Brightness control */ #define CNTRST 0x9C /* Contrast contrast */ #define CNTRST_CTRL 0x9D /* Contrast contrast center */ #define UVAD_J0 0x9E /* Auto UV adjust contrast 0 */ #define UVAD_J1 0x9F /* Auto UV adjust contrast 1 */ #define SCAL0 0xA0 /* Scaling control 0 */ #define SCAL1 0xA1 /* Scaling control 1 */ #define SCAL2 0xA2 /* Scaling control 2 */ #define FIFODLYM 0xA3 /* FIFO manual mode delay control */ #define FIFODLYA 0xA4 /* FIFO auto mode delay control */ #define SDE 0xA6 /* Special digital effect control */ #define USAT 0xA7 /* U component saturation control */ #define VSAT 0xA8 /* V component saturation control */ /* for ov7720 */ #define HUE0 0xA9 /* Hue control 0 */ #define HUE1 0xAA /* Hue control 1 */ /* for ov7725 */ #define HUECOS 0xA9 /* Cosine value */ #define HUESIN 0xAA /* Sine value */ #define SIGN 0xAB /* Sign bit for Hue and contrast */ #define DSPAUTO 0xAC /* DSP auto function ON/OFF control */ /* * register detail */ /* COM2 */ #define SOFT_SLEEP_MODE 0x10 /* Soft sleep mode */ /* Output drive capability */ #define OCAP_1x 0x00 /* 1x */ #define OCAP_2x 0x01 /* 2x */ #define OCAP_3x 0x02 /* 3x */ #define OCAP_4x 0x03 /* 4x */ /* COM3 */ #define SWAP_MASK (SWAP_RGB | SWAP_YUV | SWAP_ML) #define IMG_MASK (VFLIP_IMG | HFLIP_IMG | SCOLOR_TEST) #define VFLIP_IMG 0x80 /* Vertical flip image ON/OFF selection */ #define HFLIP_IMG 0x40 /* Horizontal mirror image ON/OFF selection */ #define SWAP_RGB 0x20 /* Swap B/R output sequence in RGB mode */ #define SWAP_YUV 0x10 /* Swap Y/UV output sequence in YUV mode */ #define SWAP_ML 0x08 /* Swap output MSB/LSB */ /* Tri-state option for output clock */ #define NOTRI_CLOCK 0x04 /* 0: Tri-state at this period */ /* 1: No tri-state at this period */ /* Tri-state option for output data */ #define NOTRI_DATA 0x02 /* 0: Tri-state at this period */ /* 1: No tri-state at this period */ #define SCOLOR_TEST 0x01 /* Sensor color bar test pattern */ /* COM4 */ /* PLL frequency control */ #define PLL_BYPASS 0x00 /* 00: Bypass PLL */ #define PLL_4x 0x40 /* 01: PLL 4x */ #define PLL_6x 0x80 /* 10: PLL 6x */ #define PLL_8x 0xc0 /* 11: PLL 8x */ /* AEC evaluate window */ #define AEC_FULL 0x00 /* 00: Full window */ #define AEC_1p2 0x10 /* 01: 1/2 window */ #define AEC_1p4 0x20 /* 10: 1/4 window */ #define AEC_2p3 0x30 /* 11: Low 2/3 window */ #define COM4_RESERVED 0x01 /* Reserved bit */ /* COM5 */ #define AFR_ON_OFF 0x80 /* Auto frame rate control ON/OFF selection */ #define AFR_SPPED 0x40 /* Auto frame rate control speed selection */ /* Auto frame rate max rate control */ #define AFR_NO_RATE 0x00 /* No reduction of frame rate */ #define AFR_1p2 0x10 /* Max reduction to 1/2 frame rate */ #define AFR_1p4 0x20 /* Max reduction to 1/4 frame rate */ #define AFR_1p8 0x30 /* Max reduction to 1/8 frame rate */ /* Auto frame rate active point control */ #define AF_2x 0x00 /* Add frame when AGC reaches 2x gain */ #define AF_4x 0x04 /* Add frame when AGC reaches 4x gain */ #define AF_8x 0x08 /* Add frame when AGC reaches 8x gain */ #define AF_16x 0x0c /* Add frame when AGC reaches 16x gain */ /* AEC max step control */ #define AEC_NO_LIMIT 0x01 /* 0 : AEC incease step has limit */ /* 1 : No limit to AEC increase step */ /* CLKRC */ /* Input clock divider register */ #define CLKRC_RESERVED 0x80 /* Reserved bit */ #define CLKRC_DIV(n) ((n) - 1) /* COM7 */ /* SCCB Register Reset */ #define SCCB_RESET 0x80 /* 0 : No change */ /* 1 : Resets all registers to default */ /* Resolution selection */ #define SLCT_MASK 0x40 /* Mask of VGA or QVGA */ #define SLCT_VGA 0x00 /* 0 : VGA */ #define SLCT_QVGA 0x40 /* 1 : QVGA */ #define ITU656_ON_OFF 0x20 /* ITU656 protocol ON/OFF selection */ #define SENSOR_RAW 0x10 /* Sensor RAW */ /* RGB output format control */ #define FMT_MASK 0x0c /* Mask of color format */ #define FMT_GBR422 0x00 /* 00 : GBR 4:2:2 */ #define FMT_RGB565 0x04 /* 01 : RGB 565 */ #define FMT_RGB555 0x08 /* 10 : RGB 555 */ #define FMT_RGB444 0x0c /* 11 : RGB 444 */ /* Output format control */ #define OFMT_MASK 0x03 /* Mask of output format */ #define OFMT_YUV 0x00 /* 00 : YUV */ #define OFMT_P_BRAW 0x01 /* 01 : Processed Bayer RAW */ #define OFMT_RGB 0x02 /* 10 : RGB */ #define OFMT_BRAW 0x03 /* 11 : Bayer RAW */ /* COM8 */ #define FAST_ALGO 0x80 /* Enable fast AGC/AEC algorithm */ /* AEC Setp size limit */ #define UNLMT_STEP 0x40 /* 0 : Step size is limited */ /* 1 : Unlimited step size */ #define BNDF_ON_OFF 0x20 /* Banding filter ON/OFF */ #define AEC_BND 0x10 /* Enable AEC below banding value */ #define AEC_ON_OFF 0x08 /* Fine AEC ON/OFF control */ #define AGC_ON 0x04 /* AGC Enable */ #define AWB_ON 0x02 /* AWB Enable */ #define AEC_ON 0x01 /* AEC Enable */ /* COM9 */ #define BASE_AECAGC 0x80 /* Histogram or average based AEC/AGC */ /* Automatic gain ceiling - maximum AGC value */ #define GAIN_2x 0x00 /* 000 : 2x */ #define GAIN_4x 0x10 /* 001 : 4x */ #define GAIN_8x 0x20 /* 010 : 8x */ #define GAIN_16x 0x30 /* 011 : 16x */ #define GAIN_32x 0x40 /* 100 : 32x */ #define GAIN_64x 0x50 /* 101 : 64x */ #define GAIN_128x 0x60 /* 110 : 128x */ #define DROP_VSYNC 0x04 /* Drop VSYNC output of corrupt frame */ #define DROP_HREF 0x02 /* Drop HREF output of corrupt frame */ /* COM11 */ #define SGLF_ON_OFF 0x02 /* Single frame ON/OFF selection */ #define SGLF_TRIG 0x01 /* Single frame transfer trigger */ /* HREF */ #define HREF_VSTART_SHIFT 6 /* VSTART LSB */ #define HREF_HSTART_SHIFT 4 /* HSTART 2 LSBs */ #define HREF_VSIZE_SHIFT 2 /* VSIZE LSB */ #define HREF_HSIZE_SHIFT 0 /* HSIZE 2 LSBs */ /* EXHCH */ #define EXHCH_VSIZE_SHIFT 2 /* VOUTSIZE LSB */ #define EXHCH_HSIZE_SHIFT 0 /* HOUTSIZE 2 LSBs */ /* DSP_CTRL1 */ #define FIFO_ON 0x80 /* FIFO enable/disable selection */ #define UV_ON_OFF 0x40 /* UV adjust function ON/OFF selection */ #define YUV444_2_422 0x20 /* YUV444 to 422 UV channel option selection */ #define CLR_MTRX_ON_OFF 0x10 /* Color matrix ON/OFF selection */ #define INTPLT_ON_OFF 0x08 /* Interpolation ON/OFF selection */ #define GMM_ON_OFF 0x04 /* Gamma function ON/OFF selection */ #define AUTO_BLK_ON_OFF 0x02 /* Black defect auto correction ON/OFF */ #define AUTO_WHT_ON_OFF 0x01 /* White define auto correction ON/OFF */ /* DSP_CTRL3 */ #define UV_MASK 0x80 /* UV output sequence option */ #define UV_ON 0x80 /* ON */ #define UV_OFF 0x00 /* OFF */ #define CBAR_MASK 0x20 /* DSP Color bar mask */ #define CBAR_ON 0x20 /* ON */ #define CBAR_OFF 0x00 /* OFF */ /* DSP_CTRL4 */ #define DSP_OFMT_YUV 0x00 #define DSP_OFMT_RGB 0x00 #define DSP_OFMT_RAW8 0x02 #define DSP_OFMT_RAW10 0x03 /* DSPAUTO (DSP Auto Function ON/OFF Control) */ #define AWB_ACTRL 0x80 /* AWB auto threshold control */ #define DENOISE_ACTRL 0x40 /* De-noise auto threshold control */ #define EDGE_ACTRL 0x20 /* Edge enhancement auto strength control */ #define UV_ACTRL 0x10 /* UV adjust auto slope control */ #define SCAL0_ACTRL 0x08 /* Auto scaling factor control */ #define SCAL1_2_ACTRL 0x04 /* Auto scaling factor control */ #define OV772X_MAX_WIDTH VGA_WIDTH #define OV772X_MAX_HEIGHT VGA_HEIGHT /* * ID */ #define OV7720 0x7720 #define OV7725 0x7721 #define VERSION(pid, ver) ((pid << 8) | (ver & 0xFF)) /* * PLL multipliers */ static struct { unsigned int mult; u8 com4; } ov772x_pll[] = { { 1, PLL_BYPASS, }, { 4, PLL_4x, }, { 6, PLL_6x, }, { 8, PLL_8x, }, }; /* * struct */ struct ov772x_color_format { u32 code; enum v4l2_colorspace colorspace; u8 dsp3; u8 dsp4; u8 com3; u8 com7; }; struct ov772x_win_size { char *name; unsigned char com7_bit; unsigned int sizeimage; struct v4l2_rect rect; }; struct ov772x_priv { struct v4l2_subdev subdev; struct v4l2_ctrl_handler hdl; struct clk *clk; struct regmap *regmap; struct ov772x_camera_info *info; struct gpio_desc *pwdn_gpio; struct gpio_desc *rstb_gpio; const struct ov772x_color_format *cfmt; const struct ov772x_win_size *win; struct v4l2_ctrl *vflip_ctrl; struct v4l2_ctrl *hflip_ctrl; unsigned int test_pattern; /* band_filter = COM8[5] ? 256 - BDBASE : 0 */ struct v4l2_ctrl *band_filter_ctrl; unsigned int fps; /* lock to protect power_count and streaming */ struct mutex lock; int power_count; int streaming; struct media_pad pad; enum v4l2_mbus_type bus_type; }; /* * supported color format list */ static const struct ov772x_color_format ov772x_cfmts[] = { { .code = MEDIA_BUS_FMT_YUYV8_2X8, .colorspace = V4L2_COLORSPACE_SRGB, .dsp3 = 0x0, .dsp4 = DSP_OFMT_YUV, .com3 = SWAP_YUV, .com7 = OFMT_YUV, }, { .code = MEDIA_BUS_FMT_YVYU8_2X8, .colorspace = V4L2_COLORSPACE_SRGB, .dsp3 = UV_ON, .dsp4 = DSP_OFMT_YUV, .com3 = SWAP_YUV, .com7 = OFMT_YUV, }, { .code = MEDIA_BUS_FMT_UYVY8_2X8, .colorspace = V4L2_COLORSPACE_SRGB, .dsp3 = 0x0, .dsp4 = DSP_OFMT_YUV, .com3 = 0x0, .com7 = OFMT_YUV, }, { .code = MEDIA_BUS_FMT_RGB555_2X8_PADHI_LE, .colorspace = V4L2_COLORSPACE_SRGB, .dsp3 = 0x0, .dsp4 = DSP_OFMT_YUV, .com3 = SWAP_RGB, .com7 = FMT_RGB555 | OFMT_RGB, }, { .code = MEDIA_BUS_FMT_RGB555_2X8_PADHI_BE, .colorspace = V4L2_COLORSPACE_SRGB, .dsp3 = 0x0, .dsp4 = DSP_OFMT_YUV, .com3 = 0x0, .com7 = FMT_RGB555 | OFMT_RGB, }, { .code = MEDIA_BUS_FMT_RGB565_2X8_LE, .colorspace = V4L2_COLORSPACE_SRGB, .dsp3 = 0x0, .dsp4 = DSP_OFMT_YUV, .com3 = SWAP_RGB, .com7 = FMT_RGB565 | OFMT_RGB, }, { .code = MEDIA_BUS_FMT_RGB565_2X8_BE, .colorspace = V4L2_COLORSPACE_SRGB, .dsp3 = 0x0, .dsp4 = DSP_OFMT_YUV, .com3 = 0x0, .com7 = FMT_RGB565 | OFMT_RGB, }, { /* Setting DSP4 to DSP_OFMT_RAW8 still gives 10-bit output, * regardless of the COM7 value. We can thus only support 10-bit * Bayer until someone figures it out. */ .code = MEDIA_BUS_FMT_SBGGR10_1X10, .colorspace = V4L2_COLORSPACE_SRGB, .dsp3 = 0x0, .dsp4 = DSP_OFMT_RAW10, .com3 = 0x0, .com7 = SENSOR_RAW | OFMT_BRAW, }, }; /* * window size list */ static const struct ov772x_win_size ov772x_win_sizes[] = { { .name = "VGA", .com7_bit = SLCT_VGA, .sizeimage = 510 * 748, .rect = { .left = 140, .top = 14, .width = VGA_WIDTH, .height = VGA_HEIGHT, }, }, { .name = "QVGA", .com7_bit = SLCT_QVGA, .sizeimage = 278 * 576, .rect = { .left = 252, .top = 6, .width = QVGA_WIDTH, .height = QVGA_HEIGHT, }, }, }; static const char * const ov772x_test_pattern_menu[] = { "Disabled", "Vertical Color Bar Type 1", }; /* * frame rate settings lists */ static const unsigned int ov772x_frame_intervals[] = { 5, 10, 15, 20, 30, 60 }; /* * general function */ static struct ov772x_priv *to_ov772x(struct v4l2_subdev *sd) { return container_of(sd, struct ov772x_priv, subdev); } static int ov772x_reset(struct ov772x_priv *priv) { int ret; ret = regmap_write(priv->regmap, COM7, SCCB_RESET); if (ret < 0) return ret; usleep_range(1000, 5000); return regmap_update_bits(priv->regmap, COM2, SOFT_SLEEP_MODE, SOFT_SLEEP_MODE); } /* * subdev ops */ static int ov772x_s_stream(struct v4l2_subdev *sd, int enable) { struct i2c_client *client = v4l2_get_subdevdata(sd); struct ov772x_priv *priv = to_ov772x(sd); int ret = 0; mutex_lock(&priv->lock); if (priv->streaming == enable) goto done; if (priv->bus_type == V4L2_MBUS_BT656) { ret = regmap_update_bits(priv->regmap, COM7, ITU656_ON_OFF, enable ? ITU656_ON_OFF : ~ITU656_ON_OFF); if (ret) goto done; } ret = regmap_update_bits(priv->regmap, COM2, SOFT_SLEEP_MODE, enable ? 0 : SOFT_SLEEP_MODE); if (ret) goto done; if (enable) { dev_dbg(&client->dev, "format %d, win %s\n", priv->cfmt->code, priv->win->name); } priv->streaming = enable; done: mutex_unlock(&priv->lock); return ret; } static unsigned int ov772x_select_fps(struct ov772x_priv *priv, struct v4l2_fract *tpf) { unsigned int fps = tpf->numerator ? tpf->denominator / tpf->numerator : tpf->denominator; unsigned int best_diff; unsigned int diff; unsigned int idx; unsigned int i; /* Approximate to the closest supported frame interval. */ best_diff = ~0L; for (i = 0, idx = 0; i < ARRAY_SIZE(ov772x_frame_intervals); i++) { diff = abs(fps - ov772x_frame_intervals[i]); if (diff < best_diff) { idx = i; best_diff = diff; } } return ov772x_frame_intervals[idx]; } static int ov772x_set_frame_rate(struct ov772x_priv *priv, unsigned int fps, const struct ov772x_color_format *cfmt, const struct ov772x_win_size *win) { unsigned long fin = clk_get_rate(priv->clk); unsigned int best_diff; unsigned int fsize; unsigned int pclk; unsigned int diff; unsigned int i; u8 clkrc = 0; u8 com4 = 0; int ret; /* Use image size (with blankings) to calculate desired pixel clock. */ switch (cfmt->com7 & OFMT_MASK) { case OFMT_BRAW: fsize = win->sizeimage; break; case OFMT_RGB: case OFMT_YUV: default: fsize = win->sizeimage * 2; break; } pclk = fps * fsize; /* * Pixel clock generation circuit is pretty simple: * * Fin -> [ / CLKRC_div] -> [ * PLL_mult] -> pclk * * Try to approximate the desired pixel clock testing all available * PLL multipliers (1x, 4x, 6x, 8x) and calculate corresponding * divisor with: * * div = PLL_mult * Fin / pclk * * and re-calculate the pixel clock using it: * * pclk = Fin * PLL_mult / CLKRC_div * * Choose the PLL_mult and CLKRC_div pair that gives a pixel clock * closer to the desired one. * * The desired pixel clock is calculated using a known frame size * (blanking included) and FPS. */ best_diff = ~0L; for (i = 0; i < ARRAY_SIZE(ov772x_pll); i++) { unsigned int pll_mult = ov772x_pll[i].mult; unsigned int pll_out = pll_mult * fin; unsigned int t_pclk; unsigned int div; if (pll_out < pclk) continue; div = DIV_ROUND_CLOSEST(pll_out, pclk); t_pclk = DIV_ROUND_CLOSEST(fin * pll_mult, div); diff = abs(pclk - t_pclk); if (diff < best_diff) { best_diff = diff; clkrc = CLKRC_DIV(div); com4 = ov772x_pll[i].com4; } } ret = regmap_write(priv->regmap, COM4, com4 | COM4_RESERVED); if (ret < 0) return ret; ret = regmap_write(priv->regmap, CLKRC, clkrc | CLKRC_RESERVED); if (ret < 0) return ret; return 0; } static int ov772x_get_frame_interval(struct v4l2_subdev *sd, struct v4l2_subdev_state *sd_state, struct v4l2_subdev_frame_interval *ival) { struct ov772x_priv *priv = to_ov772x(sd); struct v4l2_fract *tpf = &ival->interval; /* * FIXME: Implement support for V4L2_SUBDEV_FORMAT_TRY, using the V4L2 * subdev active state API. */ if (ival->which != V4L2_SUBDEV_FORMAT_ACTIVE) return -EINVAL; tpf->numerator = 1; tpf->denominator = priv->fps; return 0; } static int ov772x_set_frame_interval(struct v4l2_subdev *sd, struct v4l2_subdev_state *sd_state, struct v4l2_subdev_frame_interval *ival) { struct ov772x_priv *priv = to_ov772x(sd); struct v4l2_fract *tpf = &ival->interval; unsigned int fps; int ret = 0; /* * FIXME: Implement support for V4L2_SUBDEV_FORMAT_TRY, using the V4L2 * subdev active state API. */ if (ival->which != V4L2_SUBDEV_FORMAT_ACTIVE) return -EINVAL; mutex_lock(&priv->lock); if (priv->streaming) { ret = -EBUSY; goto error; } fps = ov772x_select_fps(priv, tpf); /* * If the device is not powered up by the host driver do * not apply any changes to H/W at this time. Instead * the frame rate will be restored right after power-up. */ if (priv->power_count > 0) { ret = ov772x_set_frame_rate(priv, fps, priv->cfmt, priv->win); if (ret) goto error; } tpf->numerator = 1; tpf->denominator = fps; priv->fps = fps; error: mutex_unlock(&priv->lock); return ret; } static int ov772x_s_ctrl(struct v4l2_ctrl *ctrl) { struct ov772x_priv *priv = container_of(ctrl->handler, struct ov772x_priv, hdl); struct regmap *regmap = priv->regmap; int ret = 0; u8 val; /* v4l2_ctrl_lock() locks our own mutex */ /* * If the device is not powered up by the host driver do * not apply any controls to H/W at this time. Instead * the controls will be restored right after power-up. */ if (priv->power_count == 0) return 0; switch (ctrl->id) { case V4L2_CID_VFLIP: val = ctrl->val ? VFLIP_IMG : 0x00; if (priv->info && (priv->info->flags & OV772X_FLAG_VFLIP)) val ^= VFLIP_IMG; return regmap_update_bits(regmap, COM3, VFLIP_IMG, val); case V4L2_CID_HFLIP: val = ctrl->val ? HFLIP_IMG : 0x00; if (priv->info && (priv->info->flags & OV772X_FLAG_HFLIP)) val ^= HFLIP_IMG; return regmap_update_bits(regmap, COM3, HFLIP_IMG, val); case V4L2_CID_BAND_STOP_FILTER: if (!ctrl->val) { /* Switch the filter off, it is on now */ ret = regmap_update_bits(regmap, BDBASE, 0xff, 0xff); if (!ret) ret = regmap_update_bits(regmap, COM8, BNDF_ON_OFF, 0); } else { /* Switch the filter on, set AEC low limit */ val = 256 - ctrl->val; ret = regmap_update_bits(regmap, COM8, BNDF_ON_OFF, BNDF_ON_OFF); if (!ret) ret = regmap_update_bits(regmap, BDBASE, 0xff, val); } return ret; case V4L2_CID_TEST_PATTERN: priv->test_pattern = ctrl->val; return 0; } return -EINVAL; } #ifdef CONFIG_VIDEO_ADV_DEBUG static int ov772x_g_register(struct v4l2_subdev *sd, struct v4l2_dbg_register *reg) { struct ov772x_priv *priv = to_ov772x(sd); int ret; unsigned int val; reg->size = 1; if (reg->reg > 0xff) return -EINVAL; ret = regmap_read(priv->regmap, reg->reg, &val); if (ret < 0) return ret; reg->val = (__u64)val; return 0; } static int ov772x_s_register(struct v4l2_subdev *sd, const struct v4l2_dbg_register *reg) { struct ov772x_priv *priv = to_ov772x(sd); if (reg->reg > 0xff || reg->val > 0xff) return -EINVAL; return regmap_write(priv->regmap, reg->reg, reg->val); } #endif static int ov772x_power_on(struct ov772x_priv *priv) { struct i2c_client *client = v4l2_get_subdevdata(&priv->subdev); int ret; if (priv->clk) { ret = clk_prepare_enable(priv->clk); if (ret) return ret; } if (priv->pwdn_gpio) { gpiod_set_value(priv->pwdn_gpio, 1); usleep_range(500, 1000); } /* * FIXME: The reset signal is connected to a shared GPIO on some * platforms (namely the SuperH Migo-R). Until a framework becomes * available to handle this cleanly, request the GPIO temporarily * to avoid conflicts. */ priv->rstb_gpio = gpiod_get_optional(&client->dev, "reset", GPIOD_OUT_LOW); if (IS_ERR(priv->rstb_gpio)) { dev_info(&client->dev, "Unable to get GPIO \"reset\""); clk_disable_unprepare(priv->clk); return PTR_ERR(priv->rstb_gpio); } if (priv->rstb_gpio) { gpiod_set_value(priv->rstb_gpio, 1); usleep_range(500, 1000); gpiod_set_value(priv->rstb_gpio, 0); usleep_range(500, 1000); gpiod_put(priv->rstb_gpio); } return 0; } static int ov772x_power_off(struct ov772x_priv *priv) { clk_disable_unprepare(priv->clk); if (priv->pwdn_gpio) { gpiod_set_value(priv->pwdn_gpio, 0); usleep_range(500, 1000); } return 0; } static int ov772x_set_params(struct ov772x_priv *priv, const struct ov772x_color_format *cfmt, const struct ov772x_win_size *win); static int ov772x_s_power(struct v4l2_subdev *sd, int on) { struct ov772x_priv *priv = to_ov772x(sd); int ret = 0; mutex_lock(&priv->lock); /* If the power count is modified from 0 to != 0 or from != 0 to 0, * update the power state. */ if (priv->power_count == !on) { if (on) { ret = ov772x_power_on(priv); /* * Restore the format, the frame rate, and * the controls */ if (!ret) ret = ov772x_set_params(priv, priv->cfmt, priv->win); } else { ret = ov772x_power_off(priv); } } if (!ret) { /* Update the power count. */ priv->power_count += on ? 1 : -1; WARN(priv->power_count < 0, "Unbalanced power count\n"); WARN(priv->power_count > 1, "Duplicated s_power call\n"); } mutex_unlock(&priv->lock); return ret; } static const struct ov772x_win_size *ov772x_select_win(u32 width, u32 height) { const struct ov772x_win_size *win = &ov772x_win_sizes[0]; u32 best_diff = UINT_MAX; unsigned int i; for (i = 0; i < ARRAY_SIZE(ov772x_win_sizes); ++i) { u32 diff = abs(width - ov772x_win_sizes[i].rect.width) + abs(height - ov772x_win_sizes[i].rect.height); if (diff < best_diff) { best_diff = diff; win = &ov772x_win_sizes[i]; } } return win; } static void ov772x_select_params(const struct v4l2_mbus_framefmt *mf, const struct ov772x_color_format **cfmt, const struct ov772x_win_size **win) { unsigned int i; /* Select a format. */ *cfmt = &ov772x_cfmts[0]; for (i = 0; i < ARRAY_SIZE(ov772x_cfmts); i++) { if (mf->code == ov772x_cfmts[i].code) { *cfmt = &ov772x_cfmts[i]; break; } } /* Select a window size. */ *win = ov772x_select_win(mf->width, mf->height); } static int ov772x_edgectrl(struct ov772x_priv *priv) { struct regmap *regmap = priv->regmap; int ret; if (!priv->info) return 0; if (priv->info->edgectrl.strength & OV772X_MANUAL_EDGE_CTRL) { /* * Manual Edge Control Mode. * * Edge auto strength bit is set by default. * Remove it when manual mode. */ ret = regmap_update_bits(regmap, DSPAUTO, EDGE_ACTRL, 0x00); if (ret < 0) return ret; ret = regmap_update_bits(regmap, EDGE_TRSHLD, OV772X_EDGE_THRESHOLD_MASK, priv->info->edgectrl.threshold); if (ret < 0) return ret; ret = regmap_update_bits(regmap, EDGE_STRNGT, OV772X_EDGE_STRENGTH_MASK, priv->info->edgectrl.strength); if (ret < 0) return ret; } else if (priv->info->edgectrl.upper > priv->info->edgectrl.lower) { /* * Auto Edge Control Mode. * * Set upper and lower limit. */ ret = regmap_update_bits(regmap, EDGE_UPPER, OV772X_EDGE_UPPER_MASK, priv->info->edgectrl.upper); if (ret < 0) return ret; ret = regmap_update_bits(regmap, EDGE_LOWER, OV772X_EDGE_LOWER_MASK, priv->info->edgectrl.lower); if (ret < 0) return ret; } return 0; } static int ov772x_set_params(struct ov772x_priv *priv, const struct ov772x_color_format *cfmt, const struct ov772x_win_size *win) { int ret; u8 val; /* Reset hardware. */ ov772x_reset(priv); /* Edge Ctrl. */ ret = ov772x_edgectrl(priv); if (ret < 0) return ret; /* Format and window size. */ ret = regmap_write(priv->regmap, HSTART, win->rect.left >> 2); if (ret < 0) goto ov772x_set_fmt_error; ret = regmap_write(priv->regmap, HSIZE, win->rect.width >> 2); if (ret < 0) goto ov772x_set_fmt_error; ret = regmap_write(priv->regmap, VSTART, win->rect.top >> 1); if (ret < 0) goto ov772x_set_fmt_error; ret = regmap_write(priv->regmap, VSIZE, win->rect.height >> 1); if (ret < 0) goto ov772x_set_fmt_error; ret = regmap_write(priv->regmap, HOUTSIZE, win->rect.width >> 2); if (ret < 0) goto ov772x_set_fmt_error; ret = regmap_write(priv->regmap, VOUTSIZE, win->rect.height >> 1); if (ret < 0) goto ov772x_set_fmt_error; ret = regmap_write(priv->regmap, HREF, ((win->rect.top & 1) << HREF_VSTART_SHIFT) | ((win->rect.left & 3) << HREF_HSTART_SHIFT) | ((win->rect.height & 1) << HREF_VSIZE_SHIFT) | ((win->rect.width & 3) << HREF_HSIZE_SHIFT)); if (ret < 0) goto ov772x_set_fmt_error; ret = regmap_write(priv->regmap, EXHCH, ((win->rect.height & 1) << EXHCH_VSIZE_SHIFT) | ((win->rect.width & 3) << EXHCH_HSIZE_SHIFT)); if (ret < 0) goto ov772x_set_fmt_error; /* Set DSP_CTRL3. */ val = cfmt->dsp3; if (val) { ret = regmap_update_bits(priv->regmap, DSP_CTRL3, UV_MASK, val); if (ret < 0) goto ov772x_set_fmt_error; } /* DSP_CTRL4: AEC reference point and DSP output format. */ if (cfmt->dsp4) { ret = regmap_write(priv->regmap, DSP_CTRL4, cfmt->dsp4); if (ret < 0) goto ov772x_set_fmt_error; } /* Set COM3. */ val = cfmt->com3; if (priv->info && (priv->info->flags & OV772X_FLAG_VFLIP)) val |= VFLIP_IMG; if (priv->info && (priv->info->flags & OV772X_FLAG_HFLIP)) val |= HFLIP_IMG; if (priv->vflip_ctrl->val) val ^= VFLIP_IMG; if (priv->hflip_ctrl->val) val ^= HFLIP_IMG; if (priv->test_pattern) val |= SCOLOR_TEST; ret = regmap_update_bits(priv->regmap, COM3, SWAP_MASK | IMG_MASK, val); if (ret < 0) goto ov772x_set_fmt_error; /* COM7: Sensor resolution and output format control. */ ret = regmap_write(priv->regmap, COM7, win->com7_bit | cfmt->com7); if (ret < 0) goto ov772x_set_fmt_error; /* COM4, CLKRC: Set pixel clock and framerate. */ ret = ov772x_set_frame_rate(priv, priv->fps, cfmt, win); if (ret < 0) goto ov772x_set_fmt_error; /* Set COM8. */ if (priv->band_filter_ctrl->val) { unsigned short band_filter = priv->band_filter_ctrl->val; ret = regmap_update_bits(priv->regmap, COM8, BNDF_ON_OFF, BNDF_ON_OFF); if (!ret) ret = regmap_update_bits(priv->regmap, BDBASE, 0xff, 256 - band_filter); if (ret < 0) goto ov772x_set_fmt_error; } return ret; ov772x_set_fmt_error: ov772x_reset(priv); return ret; } static int ov772x_get_selection(struct v4l2_subdev *sd, struct v4l2_subdev_state *sd_state, struct v4l2_subdev_selection *sel) { struct ov772x_priv *priv = to_ov772x(sd); if (sel->which != V4L2_SUBDEV_FORMAT_ACTIVE) return -EINVAL; sel->r.left = 0; sel->r.top = 0; switch (sel->target) { case V4L2_SEL_TGT_CROP_BOUNDS: case V4L2_SEL_TGT_CROP: sel->r.width = priv->win->rect.width; sel->r.height = priv->win->rect.height; return 0; default: return -EINVAL; } } static int ov772x_get_fmt(struct v4l2_subdev *sd, struct v4l2_subdev_state *sd_state, struct v4l2_subdev_format *format) { struct v4l2_mbus_framefmt *mf = &format->format; struct ov772x_priv *priv = to_ov772x(sd); if (format->pad) return -EINVAL; mf->width = priv->win->rect.width; mf->height = priv->win->rect.height; mf->code = priv->cfmt->code; mf->colorspace = priv->cfmt->colorspace; mf->field = V4L2_FIELD_NONE; return 0; } static int ov772x_set_fmt(struct v4l2_subdev *sd, struct v4l2_subdev_state *sd_state, struct v4l2_subdev_format *format) { struct ov772x_priv *priv = to_ov772x(sd); struct v4l2_mbus_framefmt *mf = &format->format; const struct ov772x_color_format *cfmt; const struct ov772x_win_size *win; int ret = 0; if (format->pad) return -EINVAL; ov772x_select_params(mf, &cfmt, &win); mf->code = cfmt->code; mf->width = win->rect.width; mf->height = win->rect.height; mf->field = V4L2_FIELD_NONE; mf->colorspace = cfmt->colorspace; mf->ycbcr_enc = V4L2_YCBCR_ENC_DEFAULT; mf->quantization = V4L2_QUANTIZATION_DEFAULT; mf->xfer_func = V4L2_XFER_FUNC_DEFAULT; if (format->which == V4L2_SUBDEV_FORMAT_TRY) { *v4l2_subdev_state_get_format(sd_state, 0) = *mf; return 0; } mutex_lock(&priv->lock); if (priv->streaming) { ret = -EBUSY; goto error; } /* * If the device is not powered up by the host driver do * not apply any changes to H/W at this time. Instead * the format will be restored right after power-up. */ if (priv->power_count > 0) { ret = ov772x_set_params(priv, cfmt, win); if (ret < 0) goto error; } priv->win = win; priv->cfmt = cfmt; error: mutex_unlock(&priv->lock); return ret; } static int ov772x_video_probe(struct ov772x_priv *priv) { struct i2c_client *client = v4l2_get_subdevdata(&priv->subdev); int pid, ver, midh, midl; const char *devname; int ret; ret = ov772x_power_on(priv); if (ret < 0) return ret; /* Check and show product ID and manufacturer ID. */ ret = regmap_read(priv->regmap, PID, &pid); if (ret < 0) return ret; ret = regmap_read(priv->regmap, VER, &ver); if (ret < 0) return ret; switch (VERSION(pid, ver)) { case OV7720: devname = "ov7720"; break; case OV7725: devname = "ov7725"; break; default: dev_err(&client->dev, "Product ID error %x:%x\n", pid, ver); ret = -ENODEV; goto done; } ret = regmap_read(priv->regmap, MIDH, &midh); if (ret < 0) return ret; ret = regmap_read(priv->regmap, MIDL, &midl); if (ret < 0) return ret; dev_info(&client->dev, "%s Product ID %0x:%0x Manufacturer ID %x:%x\n", devname, pid, ver, midh, midl); ret = v4l2_ctrl_handler_setup(&priv->hdl); done: ov772x_power_off(priv); return ret; } static const struct v4l2_ctrl_ops ov772x_ctrl_ops = { .s_ctrl = ov772x_s_ctrl, }; static const struct v4l2_subdev_core_ops ov772x_subdev_core_ops = { .log_status = v4l2_ctrl_subdev_log_status, .subscribe_event = v4l2_ctrl_subdev_subscribe_event, .unsubscribe_event = v4l2_event_subdev_unsubscribe, #ifdef CONFIG_VIDEO_ADV_DEBUG .g_register = ov772x_g_register, .s_register = ov772x_s_register, #endif .s_power = ov772x_s_power, }; static int ov772x_enum_frame_interval(struct v4l2_subdev *sd, struct v4l2_subdev_state *sd_state, struct v4l2_subdev_frame_interval_enum *fie) { if (fie->pad || fie->index >= ARRAY_SIZE(ov772x_frame_intervals)) return -EINVAL; if (fie->width != VGA_WIDTH && fie->width != QVGA_WIDTH) return -EINVAL; if (fie->height != VGA_HEIGHT && fie->height != QVGA_HEIGHT) return -EINVAL; fie->interval.numerator = 1; fie->interval.denominator = ov772x_frame_intervals[fie->index]; return 0; } static int ov772x_enum_mbus_code(struct v4l2_subdev *sd, struct v4l2_subdev_state *sd_state, struct v4l2_subdev_mbus_code_enum *code) { if (code->pad || code->index >= ARRAY_SIZE(ov772x_cfmts)) return -EINVAL; code->code = ov772x_cfmts[code->index].code; return 0; } static const struct v4l2_subdev_video_ops ov772x_subdev_video_ops = { .s_stream = ov772x_s_stream, }; static const struct v4l2_subdev_pad_ops ov772x_subdev_pad_ops = { .enum_frame_interval = ov772x_enum_frame_interval, .enum_mbus_code = ov772x_enum_mbus_code, .get_selection = ov772x_get_selection, .get_fmt = ov772x_get_fmt, .set_fmt = ov772x_set_fmt, .get_frame_interval = ov772x_get_frame_interval, .set_frame_interval = ov772x_set_frame_interval, }; static const struct v4l2_subdev_ops ov772x_subdev_ops = { .core = &ov772x_subdev_core_ops, .video = &ov772x_subdev_video_ops, .pad = &ov772x_subdev_pad_ops, }; static int ov772x_parse_dt(struct i2c_client *client, struct ov772x_priv *priv) { struct v4l2_fwnode_endpoint bus_cfg = { .bus_type = V4L2_MBUS_PARALLEL }; struct fwnode_handle *ep; int ret; ep = fwnode_graph_get_next_endpoint(dev_fwnode(&client->dev), NULL); if (!ep) { dev_err(&client->dev, "Endpoint node not found\n"); return -EINVAL; } /* * For backward compatibility with older DTS where the * bus-type property was not mandatory, assume * V4L2_MBUS_PARALLEL as it was the only supported bus at the * time. v4l2_fwnode_endpoint_alloc_parse() will not fail if * 'bus-type' is not specified. */ ret = v4l2_fwnode_endpoint_alloc_parse(ep, &bus_cfg); if (ret) { bus_cfg = (struct v4l2_fwnode_endpoint) { .bus_type = V4L2_MBUS_BT656 }; ret = v4l2_fwnode_endpoint_alloc_parse(ep, &bus_cfg); if (ret) goto error_fwnode_put; } priv->bus_type = bus_cfg.bus_type; v4l2_fwnode_endpoint_free(&bus_cfg); error_fwnode_put: fwnode_handle_put(ep); return ret; } /* * i2c_driver function */ static int ov772x_probe(struct i2c_client *client) { struct ov772x_priv *priv; int ret; static const struct regmap_config ov772x_regmap_config = { .reg_bits = 8, .val_bits = 8, .max_register = DSPAUTO, }; if (!client->dev.of_node && !client->dev.platform_data) { dev_err(&client->dev, "Missing ov772x platform data for non-DT device\n"); return -EINVAL; } priv = devm_kzalloc(&client->dev, sizeof(*priv), GFP_KERNEL); if (!priv) return -ENOMEM; priv->regmap = devm_regmap_init_sccb(client, &ov772x_regmap_config); if (IS_ERR(priv->regmap)) { dev_err(&client->dev, "Failed to allocate register map\n"); return PTR_ERR(priv->regmap); } priv->info = client->dev.platform_data; mutex_init(&priv->lock); v4l2_i2c_subdev_init(&priv->subdev, client, &ov772x_subdev_ops); priv->subdev.flags |= V4L2_SUBDEV_FL_HAS_DEVNODE | V4L2_SUBDEV_FL_HAS_EVENTS; v4l2_ctrl_handler_init(&priv->hdl, 3); /* Use our mutex for the controls */ priv->hdl.lock = &priv->lock; priv->vflip_ctrl = v4l2_ctrl_new_std(&priv->hdl, &ov772x_ctrl_ops, V4L2_CID_VFLIP, 0, 1, 1, 0); priv->hflip_ctrl = v4l2_ctrl_new_std(&priv->hdl, &ov772x_ctrl_ops, V4L2_CID_HFLIP, 0, 1, 1, 0); priv->band_filter_ctrl = v4l2_ctrl_new_std(&priv->hdl, &ov772x_ctrl_ops, V4L2_CID_BAND_STOP_FILTER, 0, 256, 1, 0); v4l2_ctrl_new_std_menu_items(&priv->hdl, &ov772x_ctrl_ops, V4L2_CID_TEST_PATTERN, ARRAY_SIZE(ov772x_test_pattern_menu) - 1, 0, 0, ov772x_test_pattern_menu); priv->subdev.ctrl_handler = &priv->hdl; if (priv->hdl.error) { ret = priv->hdl.error; goto error_ctrl_free; } priv->clk = clk_get(&client->dev, NULL); if (IS_ERR(priv->clk)) { dev_err(&client->dev, "Unable to get xclk clock\n"); ret = PTR_ERR(priv->clk); goto error_ctrl_free; } priv->pwdn_gpio = gpiod_get_optional(&client->dev, "powerdown", GPIOD_OUT_LOW); if (IS_ERR(priv->pwdn_gpio)) { dev_info(&client->dev, "Unable to get GPIO \"powerdown\""); ret = PTR_ERR(priv->pwdn_gpio); goto error_clk_put; } ret = ov772x_parse_dt(client, priv); if (ret) goto error_clk_put; ret = ov772x_video_probe(priv); if (ret < 0) goto error_gpio_put; priv->pad.flags = MEDIA_PAD_FL_SOURCE; priv->subdev.entity.function = MEDIA_ENT_F_CAM_SENSOR; ret = media_entity_pads_init(&priv->subdev.entity, 1, &priv->pad); if (ret < 0) goto error_gpio_put; priv->cfmt = &ov772x_cfmts[0]; priv->win = &ov772x_win_sizes[0]; priv->fps = 15; ret = v4l2_async_register_subdev(&priv->subdev); if (ret) goto error_entity_cleanup; return 0; error_entity_cleanup: media_entity_cleanup(&priv->subdev.entity); error_gpio_put: if (priv->pwdn_gpio) gpiod_put(priv->pwdn_gpio); error_clk_put: clk_put(priv->clk); error_ctrl_free: v4l2_ctrl_handler_free(&priv->hdl); mutex_destroy(&priv->lock); return ret; } static void ov772x_remove(struct i2c_client *client) { struct ov772x_priv *priv = to_ov772x(i2c_get_clientdata(client)); media_entity_cleanup(&priv->subdev.entity); clk_put(priv->clk); if (priv->pwdn_gpio) gpiod_put(priv->pwdn_gpio); v4l2_async_unregister_subdev(&priv->subdev); v4l2_ctrl_handler_free(&priv->hdl); mutex_destroy(&priv->lock); } static const struct i2c_device_id ov772x_id[] = { { "ov772x", 0 }, { } }; MODULE_DEVICE_TABLE(i2c, ov772x_id); static const struct of_device_id ov772x_of_match[] = { { .compatible = "ovti,ov7725", }, { .compatible = "ovti,ov7720", }, { /* sentinel */ }, }; MODULE_DEVICE_TABLE(of, ov772x_of_match); static struct i2c_driver ov772x_i2c_driver = { .driver = { .name = "ov772x", .of_match_table = ov772x_of_match, }, .probe = ov772x_probe, .remove = ov772x_remove, .id_table = ov772x_id, }; module_i2c_driver(ov772x_i2c_driver); MODULE_DESCRIPTION("V4L2 driver for OV772x image sensor"); MODULE_AUTHOR("Kuninori Morimoto"); MODULE_LICENSE("GPL v2");