// SPDX-License-Identifier: GPL-2.0-or-later /* * * keyboard input driver for i2c IR remote controls * * Copyright (c) 2000-2003 Gerd Knorr * modified for PixelView (BT878P+W/FM) by * Michal Kochanowicz * Christoph Bartelmus * modified for KNC ONE TV Station/Anubis Typhoon TView Tuner by * Ulrich Mueller * modified for em2820 based USB TV tuners by * Markus Rechberger * modified for DViCO Fusion HDTV 5 RT GOLD by * Chaogui Zhang * modified for MSI TV@nywhere Plus by * Henry Wong * Mark Schultz * Brian Rogers * modified for AVerMedia Cardbus by * Oldrich Jedlicka * Zilog Transmitter portions/ideas were derived from GPLv2+ sources: * - drivers/char/pctv_zilogir.[ch] from Hauppauge Broadway product * Copyright 2011 Hauppauge Computer works * - drivers/staging/media/lirc/lirc_zilog.c * Copyright (c) 2000 Gerd Knorr * Michal Kochanowicz * Christoph Bartelmus * Ulrich Mueller * Stefan Jahn * Jerome Brock * Thomas Reitmayr (treitmayr@yahoo.com) * Mark Weaver * Jarod Wilson * Copyright (C) 2011 Andy Walls */ #include #include #include #include #include #include #include #include #include #include #include #include #include #define FLAG_TX 1 #define FLAG_HDPVR 2 static bool enable_hdpvr; module_param(enable_hdpvr, bool, 0644); static int get_key_haup_common(struct IR_i2c *ir, enum rc_proto *protocol, u32 *scancode, u8 *ptoggle, int size) { unsigned char buf[6]; int start, range, toggle, dev, code, ircode, vendor; /* poll IR chip */ if (size != i2c_master_recv(ir->c, buf, size)) return -EIO; if (buf[0] & 0x80) { int offset = (size == 6) ? 3 : 0; /* split rc5 data block ... */ start = (buf[offset] >> 7) & 1; range = (buf[offset] >> 6) & 1; toggle = (buf[offset] >> 5) & 1; dev = buf[offset] & 0x1f; code = (buf[offset+1] >> 2) & 0x3f; /* rc5 has two start bits * the first bit must be one * the second bit defines the command range: * 1 = 0-63, 0 = 64 - 127 */ if (!start) /* no key pressed */ return 0; /* filter out invalid key presses */ ircode = (start << 12) | (toggle << 11) | (dev << 6) | code; if ((ircode & 0x1fff) == 0x1fff) return 0; if (!range) code += 64; dev_dbg(&ir->rc->dev, "ir hauppauge (rc5): s%d r%d t%d dev=%d code=%d\n", start, range, toggle, dev, code); *protocol = RC_PROTO_RC5; *scancode = RC_SCANCODE_RC5(dev, code); *ptoggle = toggle; return 1; } else if (size == 6 && (buf[0] & 0x40)) { code = buf[4]; dev = buf[3]; vendor = get_unaligned_be16(buf + 1); if (vendor == 0x800f) { *ptoggle = (dev & 0x80) != 0; *protocol = RC_PROTO_RC6_MCE; dev &= 0x7f; dev_dbg(&ir->rc->dev, "ir hauppauge (rc6-mce): t%d vendor=%d dev=%d code=%d\n", *ptoggle, vendor, dev, code); } else { *ptoggle = 0; *protocol = RC_PROTO_RC6_6A_32; dev_dbg(&ir->rc->dev, "ir hauppauge (rc6-6a-32): vendor=%d dev=%d code=%d\n", vendor, dev, code); } *scancode = RC_SCANCODE_RC6_6A(vendor, dev, code); return 1; } return 0; } static int get_key_haup(struct IR_i2c *ir, enum rc_proto *protocol, u32 *scancode, u8 *toggle) { return get_key_haup_common(ir, protocol, scancode, toggle, 3); } static int get_key_haup_xvr(struct IR_i2c *ir, enum rc_proto *protocol, u32 *scancode, u8 *toggle) { int ret; unsigned char buf[1] = { 0 }; /* * This is the same apparent "are you ready?" poll command observed * watching Windows driver traffic and implemented in lirc_zilog. With * this added, we get far saner remote behavior with z8 chips on usb * connected devices, even with the default polling interval of 100ms. */ ret = i2c_master_send(ir->c, buf, 1); if (ret != 1) return (ret < 0) ? ret : -EINVAL; return get_key_haup_common(ir, protocol, scancode, toggle, 6); } static int get_key_pixelview(struct IR_i2c *ir, enum rc_proto *protocol, u32 *scancode, u8 *toggle) { int rc; unsigned char b; /* poll IR chip */ rc = i2c_master_recv(ir->c, &b, 1); if (rc != 1) { dev_dbg(&ir->rc->dev, "read error\n"); if (rc < 0) return rc; return -EIO; } *protocol = RC_PROTO_OTHER; *scancode = b; *toggle = 0; return 1; } static int get_key_fusionhdtv(struct IR_i2c *ir, enum rc_proto *protocol, u32 *scancode, u8 *toggle) { int rc; unsigned char buf[4]; /* poll IR chip */ rc = i2c_master_recv(ir->c, buf, 4); if (rc != 4) { dev_dbg(&ir->rc->dev, "read error\n"); if (rc < 0) return rc; return -EIO; } if (buf[0] != 0 || buf[1] != 0 || buf[2] != 0 || buf[3] != 0) dev_dbg(&ir->rc->dev, "%s: %*ph\n", __func__, 4, buf); /* no key pressed or signal from other ir remote */ if(buf[0] != 0x1 || buf[1] != 0xfe) return 0; *protocol = RC_PROTO_UNKNOWN; *scancode = buf[2]; *toggle = 0; return 1; } static int get_key_knc1(struct IR_i2c *ir, enum rc_proto *protocol, u32 *scancode, u8 *toggle) { int rc; unsigned char b; /* poll IR chip */ rc = i2c_master_recv(ir->c, &b, 1); if (rc != 1) { dev_dbg(&ir->rc->dev, "read error\n"); if (rc < 0) return rc; return -EIO; } /* it seems that 0xFE indicates that a button is still hold down, while 0xff indicates that no button is hold down. 0xfe sequences are sometimes interrupted by 0xFF */ dev_dbg(&ir->rc->dev, "key %02x\n", b); if (b == 0xff) return 0; if (b == 0xfe) /* keep old data */ return 1; *protocol = RC_PROTO_UNKNOWN; *scancode = b; *toggle = 0; return 1; } static int get_key_geniatech(struct IR_i2c *ir, enum rc_proto *protocol, u32 *scancode, u8 *toggle) { int i, rc; unsigned char b; /* poll IR chip */ for (i = 0; i < 4; i++) { rc = i2c_master_recv(ir->c, &b, 1); if (rc == 1) break; msleep(20); } if (rc != 1) { dev_dbg(&ir->rc->dev, "read error\n"); if (rc < 0) return rc; return -EIO; } /* don't repeat the key */ if (ir->old == b) return 0; ir->old = b; /* decode to RC5 */ b &= 0x7f; b = (b - 1) / 2; dev_dbg(&ir->rc->dev, "key %02x\n", b); *protocol = RC_PROTO_RC5; *scancode = b; *toggle = ir->old >> 7; return 1; } static int get_key_avermedia_cardbus(struct IR_i2c *ir, enum rc_proto *protocol, u32 *scancode, u8 *toggle) { unsigned char subaddr, key, keygroup; struct i2c_msg msg[] = { { .addr = ir->c->addr, .flags = 0, .buf = &subaddr, .len = 1}, { .addr = ir->c->addr, .flags = I2C_M_RD, .buf = &key, .len = 1} }; subaddr = 0x0d; if (2 != i2c_transfer(ir->c->adapter, msg, 2)) { dev_dbg(&ir->rc->dev, "read error\n"); return -EIO; } if (key == 0xff) return 0; subaddr = 0x0b; msg[1].buf = &keygroup; if (2 != i2c_transfer(ir->c->adapter, msg, 2)) { dev_dbg(&ir->rc->dev, "read error\n"); return -EIO; } if (keygroup == 0xff) return 0; dev_dbg(&ir->rc->dev, "read key 0x%02x/0x%02x\n", key, keygroup); if (keygroup < 2 || keygroup > 4) { dev_warn(&ir->rc->dev, "warning: invalid key group 0x%02x for key 0x%02x\n", keygroup, key); } key |= (keygroup & 1) << 6; *protocol = RC_PROTO_UNKNOWN; *scancode = key; if (ir->c->addr == 0x41) /* AVerMedia EM78P153 */ *scancode |= keygroup << 8; *toggle = 0; return 1; } /* ----------------------------------------------------------------------- */ static int ir_key_poll(struct IR_i2c *ir) { enum rc_proto protocol; u32 scancode; u8 toggle; int rc; dev_dbg(&ir->rc->dev, "%s\n", __func__); rc = ir->get_key(ir, &protocol, &scancode, &toggle); if (rc < 0) { dev_warn(&ir->rc->dev, "error %d\n", rc); return rc; } if (rc) { dev_dbg(&ir->rc->dev, "%s: proto = 0x%04x, scancode = 0x%08x\n", __func__, protocol, scancode); rc_keydown(ir->rc, protocol, scancode, toggle); } return 0; } static void ir_work(struct work_struct *work) { int rc; struct IR_i2c *ir = container_of(work, struct IR_i2c, work.work); /* * If the transmit code is holding the lock, skip polling for * IR, we'll get it to it next time round */ if (mutex_trylock(&ir->lock)) { rc = ir_key_poll(ir); mutex_unlock(&ir->lock); if (rc == -ENODEV) { rc_unregister_device(ir->rc); ir->rc = NULL; return; } } schedule_delayed_work(&ir->work, msecs_to_jiffies(ir->polling_interval)); } static int ir_open(struct rc_dev *dev) { struct IR_i2c *ir = dev->priv; schedule_delayed_work(&ir->work, 0); return 0; } static void ir_close(struct rc_dev *dev) { struct IR_i2c *ir = dev->priv; cancel_delayed_work_sync(&ir->work); } /* Zilog Transmit Interface */ #define XTAL_FREQ 18432000 #define ZILOG_SEND 0x80 #define ZILOG_UIR_END 0x40 #define ZILOG_INIT_END 0x20 #define ZILOG_LIR_END 0x10 #define ZILOG_STATUS_OK 0x80 #define ZILOG_STATUS_TX 0x40 #define ZILOG_STATUS_SET 0x20 /* * As you can see here, very few different lengths of pulse and space * can be encoded. This means that the hardware does not work well with * recorded IR. It's best to work with generated IR, like from ir-ctl or * the in-kernel encoders. */ struct code_block { u8 length; u16 pulse[7]; /* not aligned */ u8 carrier_pulse; u8 carrier_space; u16 space[8]; /* not aligned */ u8 codes[61]; u8 csum[2]; } __packed; static int send_data_block(struct IR_i2c *ir, int cmd, struct code_block *code_block) { int i, j, ret; u8 buf[5], *p; p = &code_block->length; for (i = 0; p < code_block->csum; i++) code_block->csum[i & 1] ^= *p++; p = &code_block->length; for (i = 0; i < sizeof(*code_block);) { int tosend = sizeof(*code_block) - i; if (tosend > 4) tosend = 4; buf[0] = i + 1; for (j = 0; j < tosend; ++j) buf[1 + j] = p[i + j]; dev_dbg(&ir->rc->dev, "%*ph", tosend + 1, buf); ret = i2c_master_send(ir->tx_c, buf, tosend + 1); if (ret != tosend + 1) { dev_dbg(&ir->rc->dev, "i2c_master_send failed with %d\n", ret); return ret < 0 ? ret : -EIO; } i += tosend; } buf[0] = 0; buf[1] = cmd; ret = i2c_master_send(ir->tx_c, buf, 2); if (ret != 2) { dev_err(&ir->rc->dev, "i2c_master_send failed with %d\n", ret); return ret < 0 ? ret : -EIO; } usleep_range(2000, 5000); ret = i2c_master_send(ir->tx_c, buf, 1); if (ret != 1) { dev_err(&ir->rc->dev, "i2c_master_send failed with %d\n", ret); return ret < 0 ? ret : -EIO; } return 0; } static int zilog_init(struct IR_i2c *ir) { struct code_block code_block = { .length = sizeof(code_block) }; u8 buf[4]; int ret; put_unaligned_be16(0x1000, &code_block.pulse[3]); ret = send_data_block(ir, ZILOG_INIT_END, &code_block); if (ret) return ret; ret = i2c_master_recv(ir->tx_c, buf, 4); if (ret != 4) { dev_err(&ir->c->dev, "failed to retrieve firmware version: %d\n", ret); return ret < 0 ? ret : -EIO; } dev_info(&ir->c->dev, "Zilog/Hauppauge IR blaster firmware version %d.%d.%d\n", buf[1], buf[2], buf[3]); return 0; } /* * If the last slot for pulse is the same as the current slot for pulse, * then use slot no 7. */ static void copy_codes(u8 *dst, u8 *src, unsigned int count) { u8 c, last = 0xff; while (count--) { c = *src++; if ((c & 0xf0) == last) { *dst++ = 0x70 | (c & 0xf); } else { *dst++ = c; last = c & 0xf0; } } } /* * When looking for repeats, we don't care about the trailing space. This * is set to the shortest possible anyway. */ static int cmp_no_trail(u8 *a, u8 *b, unsigned int count) { while (--count) { if (*a++ != *b++) return 1; } return (*a & 0xf0) - (*b & 0xf0); } static int find_slot(u16 *array, unsigned int size, u16 val) { int i; for (i = 0; i < size; i++) { if (get_unaligned_be16(&array[i]) == val) { return i; } else if (!array[i]) { put_unaligned_be16(val, &array[i]); return i; } } return -1; } static int zilog_ir_format(struct rc_dev *rcdev, unsigned int *txbuf, unsigned int count, struct code_block *code_block) { struct IR_i2c *ir = rcdev->priv; int rep, i, l, p = 0, s, c = 0; bool repeating; u8 codes[174]; code_block->carrier_pulse = DIV_ROUND_CLOSEST( ir->duty_cycle * XTAL_FREQ / 1000, ir->carrier); code_block->carrier_space = DIV_ROUND_CLOSEST( (100 - ir->duty_cycle) * XTAL_FREQ / 1000, ir->carrier); for (i = 0; i < count; i++) { if (c >= ARRAY_SIZE(codes) - 1) { dev_warn(&rcdev->dev, "IR too long, cannot transmit\n"); return -EINVAL; } /* * Lengths more than 142220us cannot be encoded; also * this checks for multiply overflow */ if (txbuf[i] > 142220) return -EINVAL; l = DIV_ROUND_CLOSEST((XTAL_FREQ / 1000) * txbuf[i], 40000); if (i & 1) { s = find_slot(code_block->space, ARRAY_SIZE(code_block->space), l); if (s == -1) { dev_warn(&rcdev->dev, "Too many different lengths spaces, cannot transmit"); return -EINVAL; } /* We have a pulse and space */ codes[c++] = (p << 4) | s; } else { p = find_slot(code_block->pulse, ARRAY_SIZE(code_block->pulse), l); if (p == -1) { dev_warn(&rcdev->dev, "Too many different lengths pulses, cannot transmit"); return -EINVAL; } } } /* We have to encode the trailing pulse. Find the shortest space */ s = 0; for (i = 1; i < ARRAY_SIZE(code_block->space); i++) { u16 d = get_unaligned_be16(&code_block->space[i]); if (get_unaligned_be16(&code_block->space[s]) > d) s = i; } codes[c++] = (p << 4) | s; dev_dbg(&rcdev->dev, "generated %d codes\n", c); /* * Are the last N codes (so pulse + space) repeating 3 times? * if so we can shorten the codes list and use code 0xc0 to repeat * them. */ repeating = false; for (rep = c / 3; rep >= 1; rep--) { if (!memcmp(&codes[c - rep * 3], &codes[c - rep * 2], rep) && !cmp_no_trail(&codes[c - rep], &codes[c - rep * 2], rep)) { repeating = true; break; } } if (repeating) { /* first copy any leading non-repeating */ int leading = c - rep * 3; if (leading >= ARRAY_SIZE(code_block->codes) - 3 - rep) { dev_warn(&rcdev->dev, "IR too long, cannot transmit\n"); return -EINVAL; } dev_dbg(&rcdev->dev, "found trailing %d repeat\n", rep); copy_codes(code_block->codes, codes, leading); code_block->codes[leading] = 0x82; copy_codes(code_block->codes + leading + 1, codes + leading, rep); c = leading + 1 + rep; code_block->codes[c++] = 0xc0; } else { if (c >= ARRAY_SIZE(code_block->codes) - 3) { dev_warn(&rcdev->dev, "IR too long, cannot transmit\n"); return -EINVAL; } dev_dbg(&rcdev->dev, "found no trailing repeat\n"); code_block->codes[0] = 0x82; copy_codes(code_block->codes + 1, codes, c); c++; code_block->codes[c++] = 0xc4; } while (c < ARRAY_SIZE(code_block->codes)) code_block->codes[c++] = 0x83; return 0; } static int zilog_tx(struct rc_dev *rcdev, unsigned int *txbuf, unsigned int count) { struct IR_i2c *ir = rcdev->priv; struct code_block code_block = { .length = sizeof(code_block) }; u8 buf[2]; int ret, i; ret = zilog_ir_format(rcdev, txbuf, count, &code_block); if (ret) return ret; ret = mutex_lock_interruptible(&ir->lock); if (ret) return ret; ret = send_data_block(ir, ZILOG_UIR_END, &code_block); if (ret) goto out_unlock; ret = i2c_master_recv(ir->tx_c, buf, 1); if (ret != 1) { dev_err(&ir->rc->dev, "i2c_master_recv failed with %d\n", ret); goto out_unlock; } dev_dbg(&ir->rc->dev, "code set status: %02x\n", buf[0]); if (buf[0] != (ZILOG_STATUS_OK | ZILOG_STATUS_SET)) { dev_err(&ir->rc->dev, "unexpected IR TX response %02x\n", buf[0]); ret = -EIO; goto out_unlock; } buf[0] = 0x00; buf[1] = ZILOG_SEND; ret = i2c_master_send(ir->tx_c, buf, 2); if (ret != 2) { dev_err(&ir->rc->dev, "i2c_master_send failed with %d\n", ret); if (ret >= 0) ret = -EIO; goto out_unlock; } dev_dbg(&ir->rc->dev, "send command sent\n"); /* * This bit NAKs until the device is ready, so we retry it * sleeping a bit each time. This seems to be what the windows * driver does, approximately. * Try for up to 1s. */ for (i = 0; i < 20; ++i) { set_current_state(TASK_UNINTERRUPTIBLE); schedule_timeout(msecs_to_jiffies(50)); ret = i2c_master_send(ir->tx_c, buf, 1); if (ret == 1) break; dev_dbg(&ir->rc->dev, "NAK expected: i2c_master_send failed with %d (try %d)\n", ret, i + 1); } if (ret != 1) { dev_err(&ir->rc->dev, "IR TX chip never got ready: last i2c_master_send failed with %d\n", ret); if (ret >= 0) ret = -EIO; goto out_unlock; } ret = i2c_master_recv(ir->tx_c, buf, 1); if (ret != 1) { dev_err(&ir->rc->dev, "i2c_master_recv failed with %d\n", ret); ret = -EIO; goto out_unlock; } else if (buf[0] != ZILOG_STATUS_OK) { dev_err(&ir->rc->dev, "unexpected IR TX response #2: %02x\n", buf[0]); ret = -EIO; goto out_unlock; } dev_dbg(&ir->rc->dev, "transmit complete\n"); /* Oh good, it worked */ ret = count; out_unlock: mutex_unlock(&ir->lock); return ret; } static int zilog_tx_carrier(struct rc_dev *dev, u32 carrier) { struct IR_i2c *ir = dev->priv; if (carrier > 500000 || carrier < 20000) return -EINVAL; ir->carrier = carrier; return 0; } static int zilog_tx_duty_cycle(struct rc_dev *dev, u32 duty_cycle) { struct IR_i2c *ir = dev->priv; ir->duty_cycle = duty_cycle; return 0; } static int ir_probe(struct i2c_client *client) { const struct i2c_device_id *id = i2c_client_get_device_id(client); char *ir_codes = NULL; const char *name = NULL; u64 rc_proto = RC_PROTO_BIT_UNKNOWN; struct IR_i2c *ir; struct rc_dev *rc = NULL; struct i2c_adapter *adap = client->adapter; unsigned short addr = client->addr; bool probe_tx = (id->driver_data & FLAG_TX) != 0; int err; if ((id->driver_data & FLAG_HDPVR) && !enable_hdpvr) { dev_err(&client->dev, "IR for HDPVR is known to cause problems during recording, use enable_hdpvr modparam to enable\n"); return -ENODEV; } ir = devm_kzalloc(&client->dev, sizeof(*ir), GFP_KERNEL); if (!ir) return -ENOMEM; ir->c = client; ir->polling_interval = DEFAULT_POLLING_INTERVAL; i2c_set_clientdata(client, ir); switch(addr) { case 0x64: name = "Pixelview"; ir->get_key = get_key_pixelview; rc_proto = RC_PROTO_BIT_OTHER; ir_codes = RC_MAP_EMPTY; break; case 0x18: case 0x1f: case 0x1a: name = "Hauppauge"; ir->get_key = get_key_haup; rc_proto = RC_PROTO_BIT_RC5; ir_codes = RC_MAP_HAUPPAUGE; break; case 0x30: name = "KNC One"; ir->get_key = get_key_knc1; rc_proto = RC_PROTO_BIT_OTHER; ir_codes = RC_MAP_EMPTY; break; case 0x33: name = "Geniatech"; ir->get_key = get_key_geniatech; rc_proto = RC_PROTO_BIT_RC5; ir_codes = RC_MAP_TOTAL_MEDIA_IN_HAND_02; ir->old = 0xfc; break; case 0x6b: name = "FusionHDTV"; ir->get_key = get_key_fusionhdtv; rc_proto = RC_PROTO_BIT_UNKNOWN; ir_codes = RC_MAP_FUSIONHDTV_MCE; break; case 0x40: name = "AVerMedia Cardbus remote"; ir->get_key = get_key_avermedia_cardbus; rc_proto = RC_PROTO_BIT_OTHER; ir_codes = RC_MAP_AVERMEDIA_CARDBUS; break; case 0x41: name = "AVerMedia EM78P153"; ir->get_key = get_key_avermedia_cardbus; rc_proto = RC_PROTO_BIT_OTHER; /* RM-KV remote, seems to be same as RM-K6 */ ir_codes = RC_MAP_AVERMEDIA_M733A_RM_K6; break; case 0x71: name = "Hauppauge/Zilog Z8"; ir->get_key = get_key_haup_xvr; rc_proto = RC_PROTO_BIT_RC5 | RC_PROTO_BIT_RC6_MCE | RC_PROTO_BIT_RC6_6A_32; ir_codes = RC_MAP_HAUPPAUGE; ir->polling_interval = 125; probe_tx = true; break; } /* Let the caller override settings */ if (client->dev.platform_data) { const struct IR_i2c_init_data *init_data = client->dev.platform_data; ir_codes = init_data->ir_codes; rc = init_data->rc_dev; name = init_data->name; if (init_data->type) rc_proto = init_data->type; if (init_data->polling_interval) ir->polling_interval = init_data->polling_interval; switch (init_data->internal_get_key_func) { case IR_KBD_GET_KEY_CUSTOM: /* The bridge driver provided us its own function */ ir->get_key = init_data->get_key; break; case IR_KBD_GET_KEY_PIXELVIEW: ir->get_key = get_key_pixelview; break; case IR_KBD_GET_KEY_HAUP: ir->get_key = get_key_haup; break; case IR_KBD_GET_KEY_KNC1: ir->get_key = get_key_knc1; break; case IR_KBD_GET_KEY_GENIATECH: ir->get_key = get_key_geniatech; break; case IR_KBD_GET_KEY_FUSIONHDTV: ir->get_key = get_key_fusionhdtv; break; case IR_KBD_GET_KEY_HAUP_XVR: ir->get_key = get_key_haup_xvr; break; case IR_KBD_GET_KEY_AVERMEDIA_CARDBUS: ir->get_key = get_key_avermedia_cardbus; break; } } if (!rc) { /* * If platform_data doesn't specify rc_dev, initialize it * internally */ rc = rc_allocate_device(RC_DRIVER_SCANCODE); if (!rc) return -ENOMEM; } ir->rc = rc; /* Make sure we are all setup before going on */ if (!name || !ir->get_key || !rc_proto || !ir_codes) { dev_warn(&client->dev, "Unsupported device at address 0x%02x\n", addr); err = -ENODEV; goto err_out_free; } ir->ir_codes = ir_codes; snprintf(ir->phys, sizeof(ir->phys), "%s/%s", dev_name(&adap->dev), dev_name(&client->dev)); /* * Initialize input_dev fields * It doesn't make sense to allow overriding them via platform_data */ rc->input_id.bustype = BUS_I2C; rc->input_phys = ir->phys; rc->device_name = name; rc->dev.parent = &client->dev; rc->priv = ir; rc->open = ir_open; rc->close = ir_close; /* * Initialize the other fields of rc_dev */ rc->map_name = ir->ir_codes; rc->allowed_protocols = rc_proto; if (!rc->driver_name) rc->driver_name = KBUILD_MODNAME; mutex_init(&ir->lock); INIT_DELAYED_WORK(&ir->work, ir_work); if (probe_tx) { ir->tx_c = i2c_new_dummy_device(client->adapter, 0x70); if (IS_ERR(ir->tx_c)) { dev_err(&client->dev, "failed to setup tx i2c address"); err = PTR_ERR(ir->tx_c); goto err_out_free; } else if (!zilog_init(ir)) { ir->carrier = 38000; ir->duty_cycle = 40; rc->tx_ir = zilog_tx; rc->s_tx_carrier = zilog_tx_carrier; rc->s_tx_duty_cycle = zilog_tx_duty_cycle; } } err = rc_register_device(rc); if (err) goto err_out_free; return 0; err_out_free: if (!IS_ERR(ir->tx_c)) i2c_unregister_device(ir->tx_c); /* Only frees rc if it were allocated internally */ rc_free_device(rc); return err; } static void ir_remove(struct i2c_client *client) { struct IR_i2c *ir = i2c_get_clientdata(client); cancel_delayed_work_sync(&ir->work); i2c_unregister_device(ir->tx_c); rc_unregister_device(ir->rc); } static const struct i2c_device_id ir_kbd_id[] = { /* Generic entry for any IR receiver */ { "ir_video", 0 }, /* IR device specific entries should be added here */ { "ir_z8f0811_haup", FLAG_TX }, { "ir_z8f0811_hdpvr", FLAG_TX | FLAG_HDPVR }, { } }; MODULE_DEVICE_TABLE(i2c, ir_kbd_id); static struct i2c_driver ir_kbd_driver = { .driver = { .name = "ir-kbd-i2c", }, .probe = ir_probe, .remove = ir_remove, .id_table = ir_kbd_id, }; module_i2c_driver(ir_kbd_driver); /* ----------------------------------------------------------------------- */ MODULE_AUTHOR("Gerd Knorr, Michal Kochanowicz, Christoph Bartelmus, Ulrich Mueller"); MODULE_DESCRIPTION("input driver for i2c IR remote controls"); MODULE_LICENSE("GPL");