// SPDX-License-Identifier: GPL-2.0+ /* * Azoteq IQS626A Capacitive Touch Controller * * Copyright (C) 2020 Jeff LaBundy * * This driver registers up to 2 input devices: one representing capacitive or * inductive keys as well as Hall-effect switches, and one for a trackpad that * can express various gestures. */ #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #define IQS626_VER_INFO 0x00 #define IQS626_VER_INFO_PROD_NUM 0x51 #define IQS626_SYS_FLAGS 0x02 #define IQS626_SYS_FLAGS_SHOW_RESET BIT(15) #define IQS626_SYS_FLAGS_IN_ATI BIT(12) #define IQS626_SYS_FLAGS_PWR_MODE_MASK GENMASK(9, 8) #define IQS626_SYS_FLAGS_PWR_MODE_SHIFT 8 #define IQS626_HALL_OUTPUT 0x23 #define IQS626_SYS_SETTINGS 0x80 #define IQS626_SYS_SETTINGS_CLK_DIV BIT(15) #define IQS626_SYS_SETTINGS_ULP_AUTO BIT(14) #define IQS626_SYS_SETTINGS_DIS_AUTO BIT(13) #define IQS626_SYS_SETTINGS_PWR_MODE_MASK GENMASK(12, 11) #define IQS626_SYS_SETTINGS_PWR_MODE_SHIFT 11 #define IQS626_SYS_SETTINGS_PWR_MODE_MAX 3 #define IQS626_SYS_SETTINGS_ULP_UPDATE_MASK GENMASK(10, 8) #define IQS626_SYS_SETTINGS_ULP_UPDATE_SHIFT 8 #define IQS626_SYS_SETTINGS_ULP_UPDATE_MAX 7 #define IQS626_SYS_SETTINGS_EVENT_MODE BIT(5) #define IQS626_SYS_SETTINGS_EVENT_MODE_LP BIT(4) #define IQS626_SYS_SETTINGS_REDO_ATI BIT(2) #define IQS626_SYS_SETTINGS_ACK_RESET BIT(0) #define IQS626_MISC_A_ATI_BAND_DISABLE BIT(7) #define IQS626_MISC_A_TPx_LTA_UPDATE_MASK GENMASK(6, 4) #define IQS626_MISC_A_TPx_LTA_UPDATE_SHIFT 4 #define IQS626_MISC_A_TPx_LTA_UPDATE_MAX 7 #define IQS626_MISC_A_ATI_LP_ONLY BIT(3) #define IQS626_MISC_A_GPIO3_SELECT_MASK GENMASK(2, 0) #define IQS626_MISC_A_GPIO3_SELECT_MAX 7 #define IQS626_EVENT_MASK_SYS BIT(6) #define IQS626_EVENT_MASK_GESTURE BIT(3) #define IQS626_EVENT_MASK_DEEP BIT(2) #define IQS626_EVENT_MASK_TOUCH BIT(1) #define IQS626_EVENT_MASK_PROX BIT(0) #define IQS626_RATE_NP_MS_MAX 255 #define IQS626_RATE_LP_MS_MAX 255 #define IQS626_RATE_ULP_MS_MAX 4080 #define IQS626_TIMEOUT_PWR_MS_MAX 130560 #define IQS626_TIMEOUT_LTA_MS_MAX 130560 #define IQS626_MISC_B_RESEED_UI_SEL_MASK GENMASK(7, 6) #define IQS626_MISC_B_RESEED_UI_SEL_SHIFT 6 #define IQS626_MISC_B_RESEED_UI_SEL_MAX 3 #define IQS626_MISC_B_THRESH_EXTEND BIT(5) #define IQS626_MISC_B_TRACKING_UI_ENABLE BIT(4) #define IQS626_MISC_B_TPx_SWIPE BIT(3) #define IQS626_MISC_B_RESEED_OFFSET BIT(2) #define IQS626_MISC_B_FILT_STR_TPx GENMASK(1, 0) #define IQS626_THRESH_SWIPE_MAX 255 #define IQS626_TIMEOUT_TAP_MS_MAX 4080 #define IQS626_TIMEOUT_SWIPE_MS_MAX 4080 #define IQS626_CHx_ENG_0_MEAS_CAP_SIZE BIT(7) #define IQS626_CHx_ENG_0_RX_TERM_VSS BIT(5) #define IQS626_CHx_ENG_0_LINEARIZE BIT(4) #define IQS626_CHx_ENG_0_DUAL_DIR BIT(3) #define IQS626_CHx_ENG_0_FILT_DISABLE BIT(2) #define IQS626_CHx_ENG_0_ATI_MODE_MASK GENMASK(1, 0) #define IQS626_CHx_ENG_0_ATI_MODE_MAX 3 #define IQS626_CHx_ENG_1_CCT_HIGH_1 BIT(7) #define IQS626_CHx_ENG_1_CCT_HIGH_0 BIT(6) #define IQS626_CHx_ENG_1_PROJ_BIAS_MASK GENMASK(5, 4) #define IQS626_CHx_ENG_1_PROJ_BIAS_SHIFT 4 #define IQS626_CHx_ENG_1_PROJ_BIAS_MAX 3 #define IQS626_CHx_ENG_1_CCT_ENABLE BIT(3) #define IQS626_CHx_ENG_1_SENSE_FREQ_MASK GENMASK(2, 1) #define IQS626_CHx_ENG_1_SENSE_FREQ_SHIFT 1 #define IQS626_CHx_ENG_1_SENSE_FREQ_MAX 3 #define IQS626_CHx_ENG_1_ATI_BAND_TIGHTEN BIT(0) #define IQS626_CHx_ENG_2_LOCAL_CAP_MASK GENMASK(7, 6) #define IQS626_CHx_ENG_2_LOCAL_CAP_SHIFT 6 #define IQS626_CHx_ENG_2_LOCAL_CAP_MAX 3 #define IQS626_CHx_ENG_2_LOCAL_CAP_ENABLE BIT(5) #define IQS626_CHx_ENG_2_SENSE_MODE_MASK GENMASK(3, 0) #define IQS626_CHx_ENG_2_SENSE_MODE_MAX 15 #define IQS626_CHx_ENG_3_TX_FREQ_MASK GENMASK(5, 4) #define IQS626_CHx_ENG_3_TX_FREQ_SHIFT 4 #define IQS626_CHx_ENG_3_TX_FREQ_MAX 3 #define IQS626_CHx_ENG_3_INV_LOGIC BIT(0) #define IQS626_CHx_ENG_4_RX_TERM_VREG BIT(6) #define IQS626_CHx_ENG_4_CCT_LOW_1 BIT(5) #define IQS626_CHx_ENG_4_CCT_LOW_0 BIT(4) #define IQS626_CHx_ENG_4_COMP_DISABLE BIT(1) #define IQS626_CHx_ENG_4_STATIC_ENABLE BIT(0) #define IQS626_TPx_ATI_BASE_MIN 45 #define IQS626_TPx_ATI_BASE_MAX 300 #define IQS626_CHx_ATI_BASE_MASK GENMASK(7, 6) #define IQS626_CHx_ATI_BASE_75 0x00 #define IQS626_CHx_ATI_BASE_100 0x40 #define IQS626_CHx_ATI_BASE_150 0x80 #define IQS626_CHx_ATI_BASE_200 0xC0 #define IQS626_CHx_ATI_TARGET_MASK GENMASK(5, 0) #define IQS626_CHx_ATI_TARGET_MAX 2016 #define IQS626_CHx_THRESH_MAX 255 #define IQS626_CHx_HYST_DEEP_MASK GENMASK(7, 4) #define IQS626_CHx_HYST_DEEP_SHIFT 4 #define IQS626_CHx_HYST_TOUCH_MASK GENMASK(3, 0) #define IQS626_CHx_HYST_MAX 15 #define IQS626_FILT_STR_NP_TPx_MASK GENMASK(7, 6) #define IQS626_FILT_STR_NP_TPx_SHIFT 6 #define IQS626_FILT_STR_LP_TPx_MASK GENMASK(5, 4) #define IQS626_FILT_STR_LP_TPx_SHIFT 4 #define IQS626_FILT_STR_NP_CNT_MASK GENMASK(7, 6) #define IQS626_FILT_STR_NP_CNT_SHIFT 6 #define IQS626_FILT_STR_LP_CNT_MASK GENMASK(5, 4) #define IQS626_FILT_STR_LP_CNT_SHIFT 4 #define IQS626_FILT_STR_NP_LTA_MASK GENMASK(3, 2) #define IQS626_FILT_STR_NP_LTA_SHIFT 2 #define IQS626_FILT_STR_LP_LTA_MASK GENMASK(1, 0) #define IQS626_FILT_STR_MAX 3 #define IQS626_ULP_PROJ_ENABLE BIT(4) #define IQS626_GEN_WEIGHT_MAX 255 #define IQS626_MAX_REG 0xFF #define IQS626_NUM_CH_TP_3 9 #define IQS626_NUM_CH_TP_2 6 #define IQS626_NUM_CH_GEN 3 #define IQS626_NUM_CRx_TX 8 #define IQS626_PWR_MODE_POLL_SLEEP_US 50000 #define IQS626_PWR_MODE_POLL_TIMEOUT_US 500000 #define iqs626_irq_wait() usleep_range(350, 400) enum iqs626_ch_id { IQS626_CH_ULP_0, IQS626_CH_TP_2, IQS626_CH_TP_3, IQS626_CH_GEN_0, IQS626_CH_GEN_1, IQS626_CH_GEN_2, IQS626_CH_HALL, }; enum iqs626_rx_inactive { IQS626_RX_INACTIVE_VSS, IQS626_RX_INACTIVE_FLOAT, IQS626_RX_INACTIVE_VREG, }; enum iqs626_st_offs { IQS626_ST_OFFS_PROX, IQS626_ST_OFFS_DIR, IQS626_ST_OFFS_TOUCH, IQS626_ST_OFFS_DEEP, }; enum iqs626_th_offs { IQS626_TH_OFFS_PROX, IQS626_TH_OFFS_TOUCH, IQS626_TH_OFFS_DEEP, }; enum iqs626_event_id { IQS626_EVENT_PROX_DN, IQS626_EVENT_PROX_UP, IQS626_EVENT_TOUCH_DN, IQS626_EVENT_TOUCH_UP, IQS626_EVENT_DEEP_DN, IQS626_EVENT_DEEP_UP, }; enum iqs626_gesture_id { IQS626_GESTURE_FLICK_X_POS, IQS626_GESTURE_FLICK_X_NEG, IQS626_GESTURE_FLICK_Y_POS, IQS626_GESTURE_FLICK_Y_NEG, IQS626_GESTURE_TAP, IQS626_GESTURE_HOLD, IQS626_NUM_GESTURES, }; struct iqs626_event_desc { const char *name; enum iqs626_st_offs st_offs; enum iqs626_th_offs th_offs; bool dir_up; u8 mask; }; static const struct iqs626_event_desc iqs626_events[] = { [IQS626_EVENT_PROX_DN] = { .name = "event-prox", .st_offs = IQS626_ST_OFFS_PROX, .th_offs = IQS626_TH_OFFS_PROX, .mask = IQS626_EVENT_MASK_PROX, }, [IQS626_EVENT_PROX_UP] = { .name = "event-prox-alt", .st_offs = IQS626_ST_OFFS_PROX, .th_offs = IQS626_TH_OFFS_PROX, .dir_up = true, .mask = IQS626_EVENT_MASK_PROX, }, [IQS626_EVENT_TOUCH_DN] = { .name = "event-touch", .st_offs = IQS626_ST_OFFS_TOUCH, .th_offs = IQS626_TH_OFFS_TOUCH, .mask = IQS626_EVENT_MASK_TOUCH, }, [IQS626_EVENT_TOUCH_UP] = { .name = "event-touch-alt", .st_offs = IQS626_ST_OFFS_TOUCH, .th_offs = IQS626_TH_OFFS_TOUCH, .dir_up = true, .mask = IQS626_EVENT_MASK_TOUCH, }, [IQS626_EVENT_DEEP_DN] = { .name = "event-deep", .st_offs = IQS626_ST_OFFS_DEEP, .th_offs = IQS626_TH_OFFS_DEEP, .mask = IQS626_EVENT_MASK_DEEP, }, [IQS626_EVENT_DEEP_UP] = { .name = "event-deep-alt", .st_offs = IQS626_ST_OFFS_DEEP, .th_offs = IQS626_TH_OFFS_DEEP, .dir_up = true, .mask = IQS626_EVENT_MASK_DEEP, }, }; struct iqs626_ver_info { u8 prod_num; u8 sw_num; u8 hw_num; u8 padding; } __packed; struct iqs626_flags { __be16 system; u8 gesture; u8 padding_a; u8 states[4]; u8 ref_active; u8 padding_b; u8 comp_min; u8 comp_max; u8 trackpad_x; u8 trackpad_y; } __packed; struct iqs626_ch_reg_ulp { u8 thresh[2]; u8 hyst; u8 filter; u8 engine[2]; u8 ati_target; u8 padding; __be16 ati_comp; u8 rx_enable; u8 tx_enable; } __packed; struct iqs626_ch_reg_tp { u8 thresh; u8 ati_base; __be16 ati_comp; } __packed; struct iqs626_tp_grp_reg { u8 hyst; u8 ati_target; u8 engine[2]; struct iqs626_ch_reg_tp ch_reg_tp[IQS626_NUM_CH_TP_3]; } __packed; struct iqs626_ch_reg_gen { u8 thresh[3]; u8 padding; u8 hyst; u8 ati_target; __be16 ati_comp; u8 engine[5]; u8 filter; u8 rx_enable; u8 tx_enable; u8 assoc_select; u8 assoc_weight; } __packed; struct iqs626_ch_reg_hall { u8 engine; u8 thresh; u8 hyst; u8 ati_target; __be16 ati_comp; } __packed; struct iqs626_sys_reg { __be16 general; u8 misc_a; u8 event_mask; u8 active; u8 reseed; u8 rate_np; u8 rate_lp; u8 rate_ulp; u8 timeout_pwr; u8 timeout_rdy; u8 timeout_lta; u8 misc_b; u8 thresh_swipe; u8 timeout_tap; u8 timeout_swipe; u8 redo_ati; u8 padding; struct iqs626_ch_reg_ulp ch_reg_ulp; struct iqs626_tp_grp_reg tp_grp_reg; struct iqs626_ch_reg_gen ch_reg_gen[IQS626_NUM_CH_GEN]; struct iqs626_ch_reg_hall ch_reg_hall; } __packed; struct iqs626_channel_desc { const char *name; int num_ch; u8 active; bool events[ARRAY_SIZE(iqs626_events)]; }; static const struct iqs626_channel_desc iqs626_channels[] = { [IQS626_CH_ULP_0] = { .name = "ulp-0", .num_ch = 1, .active = BIT(0), .events = { [IQS626_EVENT_PROX_DN] = true, [IQS626_EVENT_PROX_UP] = true, [IQS626_EVENT_TOUCH_DN] = true, [IQS626_EVENT_TOUCH_UP] = true, }, }, [IQS626_CH_TP_2] = { .name = "trackpad-3x2", .num_ch = IQS626_NUM_CH_TP_2, .active = BIT(1), .events = { [IQS626_EVENT_TOUCH_DN] = true, }, }, [IQS626_CH_TP_3] = { .name = "trackpad-3x3", .num_ch = IQS626_NUM_CH_TP_3, .active = BIT(2) | BIT(1), .events = { [IQS626_EVENT_TOUCH_DN] = true, }, }, [IQS626_CH_GEN_0] = { .name = "generic-0", .num_ch = 1, .active = BIT(4), .events = { [IQS626_EVENT_PROX_DN] = true, [IQS626_EVENT_PROX_UP] = true, [IQS626_EVENT_TOUCH_DN] = true, [IQS626_EVENT_TOUCH_UP] = true, [IQS626_EVENT_DEEP_DN] = true, [IQS626_EVENT_DEEP_UP] = true, }, }, [IQS626_CH_GEN_1] = { .name = "generic-1", .num_ch = 1, .active = BIT(5), .events = { [IQS626_EVENT_PROX_DN] = true, [IQS626_EVENT_PROX_UP] = true, [IQS626_EVENT_TOUCH_DN] = true, [IQS626_EVENT_TOUCH_UP] = true, [IQS626_EVENT_DEEP_DN] = true, [IQS626_EVENT_DEEP_UP] = true, }, }, [IQS626_CH_GEN_2] = { .name = "generic-2", .num_ch = 1, .active = BIT(6), .events = { [IQS626_EVENT_PROX_DN] = true, [IQS626_EVENT_PROX_UP] = true, [IQS626_EVENT_TOUCH_DN] = true, [IQS626_EVENT_TOUCH_UP] = true, [IQS626_EVENT_DEEP_DN] = true, [IQS626_EVENT_DEEP_UP] = true, }, }, [IQS626_CH_HALL] = { .name = "hall", .num_ch = 1, .active = BIT(7), .events = { [IQS626_EVENT_TOUCH_DN] = true, [IQS626_EVENT_TOUCH_UP] = true, }, }, }; struct iqs626_private { struct i2c_client *client; struct regmap *regmap; struct iqs626_sys_reg sys_reg; struct completion ati_done; struct input_dev *keypad; struct input_dev *trackpad; struct touchscreen_properties prop; unsigned int kp_type[ARRAY_SIZE(iqs626_channels)] [ARRAY_SIZE(iqs626_events)]; unsigned int kp_code[ARRAY_SIZE(iqs626_channels)] [ARRAY_SIZE(iqs626_events)]; unsigned int tp_code[IQS626_NUM_GESTURES]; unsigned int suspend_mode; }; static noinline_for_stack int iqs626_parse_events(struct iqs626_private *iqs626, struct fwnode_handle *ch_node, enum iqs626_ch_id ch_id) { struct iqs626_sys_reg *sys_reg = &iqs626->sys_reg; struct i2c_client *client = iqs626->client; struct fwnode_handle *ev_node; const char *ev_name; u8 *thresh, *hyst; unsigned int val; int i; switch (ch_id) { case IQS626_CH_ULP_0: thresh = sys_reg->ch_reg_ulp.thresh; hyst = &sys_reg->ch_reg_ulp.hyst; break; case IQS626_CH_TP_2: case IQS626_CH_TP_3: thresh = &sys_reg->tp_grp_reg.ch_reg_tp[0].thresh; hyst = &sys_reg->tp_grp_reg.hyst; break; case IQS626_CH_GEN_0: case IQS626_CH_GEN_1: case IQS626_CH_GEN_2: i = ch_id - IQS626_CH_GEN_0; thresh = sys_reg->ch_reg_gen[i].thresh; hyst = &sys_reg->ch_reg_gen[i].hyst; break; case IQS626_CH_HALL: thresh = &sys_reg->ch_reg_hall.thresh; hyst = &sys_reg->ch_reg_hall.hyst; break; default: return -EINVAL; } for (i = 0; i < ARRAY_SIZE(iqs626_events); i++) { if (!iqs626_channels[ch_id].events[i]) continue; if (ch_id == IQS626_CH_TP_2 || ch_id == IQS626_CH_TP_3) { /* * Trackpad touch events are simply described under the * trackpad child node. */ ev_node = fwnode_handle_get(ch_node); } else { ev_name = iqs626_events[i].name; ev_node = fwnode_get_named_child_node(ch_node, ev_name); if (!ev_node) continue; if (!fwnode_property_read_u32(ev_node, "linux,code", &val)) { iqs626->kp_code[ch_id][i] = val; if (fwnode_property_read_u32(ev_node, "linux,input-type", &val)) { if (ch_id == IQS626_CH_HALL) val = EV_SW; else val = EV_KEY; } if (val != EV_KEY && val != EV_SW) { dev_err(&client->dev, "Invalid input type: %u\n", val); fwnode_handle_put(ev_node); return -EINVAL; } iqs626->kp_type[ch_id][i] = val; sys_reg->event_mask &= ~iqs626_events[i].mask; } } if (!fwnode_property_read_u32(ev_node, "azoteq,hyst", &val)) { if (val > IQS626_CHx_HYST_MAX) { dev_err(&client->dev, "Invalid %s channel hysteresis: %u\n", fwnode_get_name(ch_node), val); fwnode_handle_put(ev_node); return -EINVAL; } if (i == IQS626_EVENT_DEEP_DN || i == IQS626_EVENT_DEEP_UP) { *hyst &= ~IQS626_CHx_HYST_DEEP_MASK; *hyst |= (val << IQS626_CHx_HYST_DEEP_SHIFT); } else if (i == IQS626_EVENT_TOUCH_DN || i == IQS626_EVENT_TOUCH_UP) { *hyst &= ~IQS626_CHx_HYST_TOUCH_MASK; *hyst |= val; } } if (ch_id != IQS626_CH_TP_2 && ch_id != IQS626_CH_TP_3 && !fwnode_property_read_u32(ev_node, "azoteq,thresh", &val)) { if (val > IQS626_CHx_THRESH_MAX) { dev_err(&client->dev, "Invalid %s channel threshold: %u\n", fwnode_get_name(ch_node), val); fwnode_handle_put(ev_node); return -EINVAL; } if (ch_id == IQS626_CH_HALL) *thresh = val; else *(thresh + iqs626_events[i].th_offs) = val; } fwnode_handle_put(ev_node); } return 0; } static noinline_for_stack int iqs626_parse_ati_target(struct iqs626_private *iqs626, struct fwnode_handle *ch_node, enum iqs626_ch_id ch_id) { struct iqs626_sys_reg *sys_reg = &iqs626->sys_reg; struct i2c_client *client = iqs626->client; unsigned int val; u8 *ati_target; int i; switch (ch_id) { case IQS626_CH_ULP_0: ati_target = &sys_reg->ch_reg_ulp.ati_target; break; case IQS626_CH_TP_2: case IQS626_CH_TP_3: ati_target = &sys_reg->tp_grp_reg.ati_target; break; case IQS626_CH_GEN_0: case IQS626_CH_GEN_1: case IQS626_CH_GEN_2: i = ch_id - IQS626_CH_GEN_0; ati_target = &sys_reg->ch_reg_gen[i].ati_target; break; case IQS626_CH_HALL: ati_target = &sys_reg->ch_reg_hall.ati_target; break; default: return -EINVAL; } if (!fwnode_property_read_u32(ch_node, "azoteq,ati-target", &val)) { if (val > IQS626_CHx_ATI_TARGET_MAX) { dev_err(&client->dev, "Invalid %s channel ATI target: %u\n", fwnode_get_name(ch_node), val); return -EINVAL; } *ati_target &= ~IQS626_CHx_ATI_TARGET_MASK; *ati_target |= (val / 32); } if (ch_id != IQS626_CH_TP_2 && ch_id != IQS626_CH_TP_3 && !fwnode_property_read_u32(ch_node, "azoteq,ati-base", &val)) { switch (val) { case 75: val = IQS626_CHx_ATI_BASE_75; break; case 100: val = IQS626_CHx_ATI_BASE_100; break; case 150: val = IQS626_CHx_ATI_BASE_150; break; case 200: val = IQS626_CHx_ATI_BASE_200; break; default: dev_err(&client->dev, "Invalid %s channel ATI base: %u\n", fwnode_get_name(ch_node), val); return -EINVAL; } *ati_target &= ~IQS626_CHx_ATI_BASE_MASK; *ati_target |= val; } return 0; } static int iqs626_parse_pins(struct iqs626_private *iqs626, struct fwnode_handle *ch_node, const char *propname, u8 *enable) { struct i2c_client *client = iqs626->client; unsigned int val[IQS626_NUM_CRx_TX]; int error, count, i; if (!fwnode_property_present(ch_node, propname)) return 0; count = fwnode_property_count_u32(ch_node, propname); if (count > IQS626_NUM_CRx_TX) { dev_err(&client->dev, "Too many %s channel CRX/TX pins present\n", fwnode_get_name(ch_node)); return -EINVAL; } else if (count < 0) { dev_err(&client->dev, "Failed to count %s channel CRX/TX pins: %d\n", fwnode_get_name(ch_node), count); return count; } error = fwnode_property_read_u32_array(ch_node, propname, val, count); if (error) { dev_err(&client->dev, "Failed to read %s channel CRX/TX pins: %d\n", fwnode_get_name(ch_node), error); return error; } *enable = 0; for (i = 0; i < count; i++) { if (val[i] >= IQS626_NUM_CRx_TX) { dev_err(&client->dev, "Invalid %s channel CRX/TX pin: %u\n", fwnode_get_name(ch_node), val[i]); return -EINVAL; } *enable |= BIT(val[i]); } return 0; } static int iqs626_parse_trackpad(struct iqs626_private *iqs626, struct fwnode_handle *ch_node, enum iqs626_ch_id ch_id) { struct iqs626_sys_reg *sys_reg = &iqs626->sys_reg; struct i2c_client *client = iqs626->client; u8 *hyst = &sys_reg->tp_grp_reg.hyst; int error, count, i; unsigned int val; if (!fwnode_property_read_u32(ch_node, "azoteq,lta-update", &val)) { if (val > IQS626_MISC_A_TPx_LTA_UPDATE_MAX) { dev_err(&client->dev, "Invalid %s channel update rate: %u\n", fwnode_get_name(ch_node), val); return -EINVAL; } sys_reg->misc_a &= ~IQS626_MISC_A_TPx_LTA_UPDATE_MASK; sys_reg->misc_a |= (val << IQS626_MISC_A_TPx_LTA_UPDATE_SHIFT); } if (!fwnode_property_read_u32(ch_node, "azoteq,filt-str-trackpad", &val)) { if (val > IQS626_FILT_STR_MAX) { dev_err(&client->dev, "Invalid %s channel filter strength: %u\n", fwnode_get_name(ch_node), val); return -EINVAL; } sys_reg->misc_b &= ~IQS626_MISC_B_FILT_STR_TPx; sys_reg->misc_b |= val; } if (!fwnode_property_read_u32(ch_node, "azoteq,filt-str-np-cnt", &val)) { if (val > IQS626_FILT_STR_MAX) { dev_err(&client->dev, "Invalid %s channel filter strength: %u\n", fwnode_get_name(ch_node), val); return -EINVAL; } *hyst &= ~IQS626_FILT_STR_NP_TPx_MASK; *hyst |= (val << IQS626_FILT_STR_NP_TPx_SHIFT); } if (!fwnode_property_read_u32(ch_node, "azoteq,filt-str-lp-cnt", &val)) { if (val > IQS626_FILT_STR_MAX) { dev_err(&client->dev, "Invalid %s channel filter strength: %u\n", fwnode_get_name(ch_node), val); return -EINVAL; } *hyst &= ~IQS626_FILT_STR_LP_TPx_MASK; *hyst |= (val << IQS626_FILT_STR_LP_TPx_SHIFT); } for (i = 0; i < iqs626_channels[ch_id].num_ch; i++) { u8 *ati_base = &sys_reg->tp_grp_reg.ch_reg_tp[i].ati_base; u8 *thresh = &sys_reg->tp_grp_reg.ch_reg_tp[i].thresh; struct fwnode_handle *tc_node; char tc_name[10]; snprintf(tc_name, sizeof(tc_name), "channel-%d", i); tc_node = fwnode_get_named_child_node(ch_node, tc_name); if (!tc_node) continue; if (!fwnode_property_read_u32(tc_node, "azoteq,ati-base", &val)) { if (val < IQS626_TPx_ATI_BASE_MIN || val > IQS626_TPx_ATI_BASE_MAX) { dev_err(&client->dev, "Invalid %s %s ATI base: %u\n", fwnode_get_name(ch_node), tc_name, val); fwnode_handle_put(tc_node); return -EINVAL; } *ati_base = val - IQS626_TPx_ATI_BASE_MIN; } if (!fwnode_property_read_u32(tc_node, "azoteq,thresh", &val)) { if (val > IQS626_CHx_THRESH_MAX) { dev_err(&client->dev, "Invalid %s %s threshold: %u\n", fwnode_get_name(ch_node), tc_name, val); fwnode_handle_put(tc_node); return -EINVAL; } *thresh = val; } fwnode_handle_put(tc_node); } if (!fwnode_property_present(ch_node, "linux,keycodes")) return 0; count = fwnode_property_count_u32(ch_node, "linux,keycodes"); if (count > IQS626_NUM_GESTURES) { dev_err(&client->dev, "Too many keycodes present\n"); return -EINVAL; } else if (count < 0) { dev_err(&client->dev, "Failed to count keycodes: %d\n", count); return count; } error = fwnode_property_read_u32_array(ch_node, "linux,keycodes", iqs626->tp_code, count); if (error) { dev_err(&client->dev, "Failed to read keycodes: %d\n", error); return error; } sys_reg->misc_b &= ~IQS626_MISC_B_TPx_SWIPE; if (fwnode_property_present(ch_node, "azoteq,gesture-swipe")) sys_reg->misc_b |= IQS626_MISC_B_TPx_SWIPE; if (!fwnode_property_read_u32(ch_node, "azoteq,timeout-tap-ms", &val)) { if (val > IQS626_TIMEOUT_TAP_MS_MAX) { dev_err(&client->dev, "Invalid %s channel timeout: %u\n", fwnode_get_name(ch_node), val); return -EINVAL; } sys_reg->timeout_tap = val / 16; } if (!fwnode_property_read_u32(ch_node, "azoteq,timeout-swipe-ms", &val)) { if (val > IQS626_TIMEOUT_SWIPE_MS_MAX) { dev_err(&client->dev, "Invalid %s channel timeout: %u\n", fwnode_get_name(ch_node), val); return -EINVAL; } sys_reg->timeout_swipe = val / 16; } if (!fwnode_property_read_u32(ch_node, "azoteq,thresh-swipe", &val)) { if (val > IQS626_THRESH_SWIPE_MAX) { dev_err(&client->dev, "Invalid %s channel threshold: %u\n", fwnode_get_name(ch_node), val); return -EINVAL; } sys_reg->thresh_swipe = val; } sys_reg->event_mask &= ~IQS626_EVENT_MASK_GESTURE; return 0; } static noinline_for_stack int iqs626_parse_channel(struct iqs626_private *iqs626, struct fwnode_handle *ch_node, enum iqs626_ch_id ch_id) { struct iqs626_sys_reg *sys_reg = &iqs626->sys_reg; struct i2c_client *client = iqs626->client; u8 *engine, *filter, *rx_enable, *tx_enable; u8 *assoc_select, *assoc_weight; unsigned int val; int error, i; switch (ch_id) { case IQS626_CH_ULP_0: engine = sys_reg->ch_reg_ulp.engine; break; case IQS626_CH_TP_2: case IQS626_CH_TP_3: engine = sys_reg->tp_grp_reg.engine; break; case IQS626_CH_GEN_0: case IQS626_CH_GEN_1: case IQS626_CH_GEN_2: i = ch_id - IQS626_CH_GEN_0; engine = sys_reg->ch_reg_gen[i].engine; break; case IQS626_CH_HALL: engine = &sys_reg->ch_reg_hall.engine; break; default: return -EINVAL; } error = iqs626_parse_ati_target(iqs626, ch_node, ch_id); if (error) return error; error = iqs626_parse_events(iqs626, ch_node, ch_id); if (error) return error; if (!fwnode_property_present(ch_node, "azoteq,ati-exclude")) sys_reg->redo_ati |= iqs626_channels[ch_id].active; if (!fwnode_property_present(ch_node, "azoteq,reseed-disable")) sys_reg->reseed |= iqs626_channels[ch_id].active; *engine |= IQS626_CHx_ENG_0_MEAS_CAP_SIZE; if (fwnode_property_present(ch_node, "azoteq,meas-cap-decrease")) *engine &= ~IQS626_CHx_ENG_0_MEAS_CAP_SIZE; *engine |= IQS626_CHx_ENG_0_RX_TERM_VSS; if (!fwnode_property_read_u32(ch_node, "azoteq,rx-inactive", &val)) { switch (val) { case IQS626_RX_INACTIVE_VSS: break; case IQS626_RX_INACTIVE_FLOAT: *engine &= ~IQS626_CHx_ENG_0_RX_TERM_VSS; if (ch_id == IQS626_CH_GEN_0 || ch_id == IQS626_CH_GEN_1 || ch_id == IQS626_CH_GEN_2) *(engine + 4) &= ~IQS626_CHx_ENG_4_RX_TERM_VREG; break; case IQS626_RX_INACTIVE_VREG: if (ch_id == IQS626_CH_GEN_0 || ch_id == IQS626_CH_GEN_1 || ch_id == IQS626_CH_GEN_2) { *engine &= ~IQS626_CHx_ENG_0_RX_TERM_VSS; *(engine + 4) |= IQS626_CHx_ENG_4_RX_TERM_VREG; break; } fallthrough; default: dev_err(&client->dev, "Invalid %s channel CRX pin termination: %u\n", fwnode_get_name(ch_node), val); return -EINVAL; } } *engine &= ~IQS626_CHx_ENG_0_LINEARIZE; if (fwnode_property_present(ch_node, "azoteq,linearize")) *engine |= IQS626_CHx_ENG_0_LINEARIZE; *engine &= ~IQS626_CHx_ENG_0_DUAL_DIR; if (fwnode_property_present(ch_node, "azoteq,dual-direction")) *engine |= IQS626_CHx_ENG_0_DUAL_DIR; *engine &= ~IQS626_CHx_ENG_0_FILT_DISABLE; if (fwnode_property_present(ch_node, "azoteq,filt-disable")) *engine |= IQS626_CHx_ENG_0_FILT_DISABLE; if (!fwnode_property_read_u32(ch_node, "azoteq,ati-mode", &val)) { if (val > IQS626_CHx_ENG_0_ATI_MODE_MAX) { dev_err(&client->dev, "Invalid %s channel ATI mode: %u\n", fwnode_get_name(ch_node), val); return -EINVAL; } *engine &= ~IQS626_CHx_ENG_0_ATI_MODE_MASK; *engine |= val; } if (ch_id == IQS626_CH_HALL) return 0; *(engine + 1) &= ~IQS626_CHx_ENG_1_CCT_ENABLE; if (!fwnode_property_read_u32(ch_node, "azoteq,cct-increase", &val) && val) { unsigned int orig_val = val--; /* * In the case of the generic channels, the charge cycle time * field doubles in size and straddles two separate registers. */ if (ch_id == IQS626_CH_GEN_0 || ch_id == IQS626_CH_GEN_1 || ch_id == IQS626_CH_GEN_2) { *(engine + 4) &= ~IQS626_CHx_ENG_4_CCT_LOW_1; if (val & BIT(1)) *(engine + 4) |= IQS626_CHx_ENG_4_CCT_LOW_1; *(engine + 4) &= ~IQS626_CHx_ENG_4_CCT_LOW_0; if (val & BIT(0)) *(engine + 4) |= IQS626_CHx_ENG_4_CCT_LOW_0; val >>= 2; } if (val & ~GENMASK(1, 0)) { dev_err(&client->dev, "Invalid %s channel charge cycle time: %u\n", fwnode_get_name(ch_node), orig_val); return -EINVAL; } *(engine + 1) &= ~IQS626_CHx_ENG_1_CCT_HIGH_1; if (val & BIT(1)) *(engine + 1) |= IQS626_CHx_ENG_1_CCT_HIGH_1; *(engine + 1) &= ~IQS626_CHx_ENG_1_CCT_HIGH_0; if (val & BIT(0)) *(engine + 1) |= IQS626_CHx_ENG_1_CCT_HIGH_0; *(engine + 1) |= IQS626_CHx_ENG_1_CCT_ENABLE; } if (!fwnode_property_read_u32(ch_node, "azoteq,proj-bias", &val)) { if (val > IQS626_CHx_ENG_1_PROJ_BIAS_MAX) { dev_err(&client->dev, "Invalid %s channel bias current: %u\n", fwnode_get_name(ch_node), val); return -EINVAL; } *(engine + 1) &= ~IQS626_CHx_ENG_1_PROJ_BIAS_MASK; *(engine + 1) |= (val << IQS626_CHx_ENG_1_PROJ_BIAS_SHIFT); } if (!fwnode_property_read_u32(ch_node, "azoteq,sense-freq", &val)) { if (val > IQS626_CHx_ENG_1_SENSE_FREQ_MAX) { dev_err(&client->dev, "Invalid %s channel sensing frequency: %u\n", fwnode_get_name(ch_node), val); return -EINVAL; } *(engine + 1) &= ~IQS626_CHx_ENG_1_SENSE_FREQ_MASK; *(engine + 1) |= (val << IQS626_CHx_ENG_1_SENSE_FREQ_SHIFT); } *(engine + 1) &= ~IQS626_CHx_ENG_1_ATI_BAND_TIGHTEN; if (fwnode_property_present(ch_node, "azoteq,ati-band-tighten")) *(engine + 1) |= IQS626_CHx_ENG_1_ATI_BAND_TIGHTEN; if (ch_id == IQS626_CH_TP_2 || ch_id == IQS626_CH_TP_3) return iqs626_parse_trackpad(iqs626, ch_node, ch_id); if (ch_id == IQS626_CH_ULP_0) { sys_reg->ch_reg_ulp.hyst &= ~IQS626_ULP_PROJ_ENABLE; if (fwnode_property_present(ch_node, "azoteq,proj-enable")) sys_reg->ch_reg_ulp.hyst |= IQS626_ULP_PROJ_ENABLE; filter = &sys_reg->ch_reg_ulp.filter; rx_enable = &sys_reg->ch_reg_ulp.rx_enable; tx_enable = &sys_reg->ch_reg_ulp.tx_enable; } else { i = ch_id - IQS626_CH_GEN_0; filter = &sys_reg->ch_reg_gen[i].filter; rx_enable = &sys_reg->ch_reg_gen[i].rx_enable; tx_enable = &sys_reg->ch_reg_gen[i].tx_enable; } if (!fwnode_property_read_u32(ch_node, "azoteq,filt-str-np-cnt", &val)) { if (val > IQS626_FILT_STR_MAX) { dev_err(&client->dev, "Invalid %s channel filter strength: %u\n", fwnode_get_name(ch_node), val); return -EINVAL; } *filter &= ~IQS626_FILT_STR_NP_CNT_MASK; *filter |= (val << IQS626_FILT_STR_NP_CNT_SHIFT); } if (!fwnode_property_read_u32(ch_node, "azoteq,filt-str-lp-cnt", &val)) { if (val > IQS626_FILT_STR_MAX) { dev_err(&client->dev, "Invalid %s channel filter strength: %u\n", fwnode_get_name(ch_node), val); return -EINVAL; } *filter &= ~IQS626_FILT_STR_LP_CNT_MASK; *filter |= (val << IQS626_FILT_STR_LP_CNT_SHIFT); } if (!fwnode_property_read_u32(ch_node, "azoteq,filt-str-np-lta", &val)) { if (val > IQS626_FILT_STR_MAX) { dev_err(&client->dev, "Invalid %s channel filter strength: %u\n", fwnode_get_name(ch_node), val); return -EINVAL; } *filter &= ~IQS626_FILT_STR_NP_LTA_MASK; *filter |= (val << IQS626_FILT_STR_NP_LTA_SHIFT); } if (!fwnode_property_read_u32(ch_node, "azoteq,filt-str-lp-lta", &val)) { if (val > IQS626_FILT_STR_MAX) { dev_err(&client->dev, "Invalid %s channel filter strength: %u\n", fwnode_get_name(ch_node), val); return -EINVAL; } *filter &= ~IQS626_FILT_STR_LP_LTA_MASK; *filter |= val; } error = iqs626_parse_pins(iqs626, ch_node, "azoteq,rx-enable", rx_enable); if (error) return error; error = iqs626_parse_pins(iqs626, ch_node, "azoteq,tx-enable", tx_enable); if (error) return error; if (ch_id == IQS626_CH_ULP_0) return 0; *(engine + 2) &= ~IQS626_CHx_ENG_2_LOCAL_CAP_ENABLE; if (!fwnode_property_read_u32(ch_node, "azoteq,local-cap-size", &val) && val) { unsigned int orig_val = val--; if (val > IQS626_CHx_ENG_2_LOCAL_CAP_MAX) { dev_err(&client->dev, "Invalid %s channel local cap. size: %u\n", fwnode_get_name(ch_node), orig_val); return -EINVAL; } *(engine + 2) &= ~IQS626_CHx_ENG_2_LOCAL_CAP_MASK; *(engine + 2) |= (val << IQS626_CHx_ENG_2_LOCAL_CAP_SHIFT); *(engine + 2) |= IQS626_CHx_ENG_2_LOCAL_CAP_ENABLE; } if (!fwnode_property_read_u32(ch_node, "azoteq,sense-mode", &val)) { if (val > IQS626_CHx_ENG_2_SENSE_MODE_MAX) { dev_err(&client->dev, "Invalid %s channel sensing mode: %u\n", fwnode_get_name(ch_node), val); return -EINVAL; } *(engine + 2) &= ~IQS626_CHx_ENG_2_SENSE_MODE_MASK; *(engine + 2) |= val; } if (!fwnode_property_read_u32(ch_node, "azoteq,tx-freq", &val)) { if (val > IQS626_CHx_ENG_3_TX_FREQ_MAX) { dev_err(&client->dev, "Invalid %s channel excitation frequency: %u\n", fwnode_get_name(ch_node), val); return -EINVAL; } *(engine + 3) &= ~IQS626_CHx_ENG_3_TX_FREQ_MASK; *(engine + 3) |= (val << IQS626_CHx_ENG_3_TX_FREQ_SHIFT); } *(engine + 3) &= ~IQS626_CHx_ENG_3_INV_LOGIC; if (fwnode_property_present(ch_node, "azoteq,invert-enable")) *(engine + 3) |= IQS626_CHx_ENG_3_INV_LOGIC; *(engine + 4) &= ~IQS626_CHx_ENG_4_COMP_DISABLE; if (fwnode_property_present(ch_node, "azoteq,comp-disable")) *(engine + 4) |= IQS626_CHx_ENG_4_COMP_DISABLE; *(engine + 4) &= ~IQS626_CHx_ENG_4_STATIC_ENABLE; if (fwnode_property_present(ch_node, "azoteq,static-enable")) *(engine + 4) |= IQS626_CHx_ENG_4_STATIC_ENABLE; i = ch_id - IQS626_CH_GEN_0; assoc_select = &sys_reg->ch_reg_gen[i].assoc_select; assoc_weight = &sys_reg->ch_reg_gen[i].assoc_weight; *assoc_select = 0; if (!fwnode_property_present(ch_node, "azoteq,assoc-select")) return 0; for (i = 0; i < ARRAY_SIZE(iqs626_channels); i++) { if (fwnode_property_match_string(ch_node, "azoteq,assoc-select", iqs626_channels[i].name) < 0) continue; *assoc_select |= iqs626_channels[i].active; } if (fwnode_property_read_u32(ch_node, "azoteq,assoc-weight", &val)) return 0; if (val > IQS626_GEN_WEIGHT_MAX) { dev_err(&client->dev, "Invalid %s channel associated weight: %u\n", fwnode_get_name(ch_node), val); return -EINVAL; } *assoc_weight = val; return 0; } static int iqs626_parse_prop(struct iqs626_private *iqs626) { struct iqs626_sys_reg *sys_reg = &iqs626->sys_reg; struct i2c_client *client = iqs626->client; struct fwnode_handle *ch_node; unsigned int val; int error, i; u16 general; if (!device_property_read_u32(&client->dev, "azoteq,suspend-mode", &val)) { if (val > IQS626_SYS_SETTINGS_PWR_MODE_MAX) { dev_err(&client->dev, "Invalid suspend mode: %u\n", val); return -EINVAL; } iqs626->suspend_mode = val; } error = regmap_raw_read(iqs626->regmap, IQS626_SYS_SETTINGS, sys_reg, sizeof(*sys_reg)); if (error) return error; general = be16_to_cpu(sys_reg->general); general &= IQS626_SYS_SETTINGS_ULP_UPDATE_MASK; if (device_property_present(&client->dev, "azoteq,clk-div")) general |= IQS626_SYS_SETTINGS_CLK_DIV; if (device_property_present(&client->dev, "azoteq,ulp-enable")) general |= IQS626_SYS_SETTINGS_ULP_AUTO; if (!device_property_read_u32(&client->dev, "azoteq,ulp-update", &val)) { if (val > IQS626_SYS_SETTINGS_ULP_UPDATE_MAX) { dev_err(&client->dev, "Invalid update rate: %u\n", val); return -EINVAL; } general &= ~IQS626_SYS_SETTINGS_ULP_UPDATE_MASK; general |= (val << IQS626_SYS_SETTINGS_ULP_UPDATE_SHIFT); } sys_reg->misc_a &= ~IQS626_MISC_A_ATI_BAND_DISABLE; if (device_property_present(&client->dev, "azoteq,ati-band-disable")) sys_reg->misc_a |= IQS626_MISC_A_ATI_BAND_DISABLE; sys_reg->misc_a &= ~IQS626_MISC_A_ATI_LP_ONLY; if (device_property_present(&client->dev, "azoteq,ati-lp-only")) sys_reg->misc_a |= IQS626_MISC_A_ATI_LP_ONLY; if (!device_property_read_u32(&client->dev, "azoteq,gpio3-select", &val)) { if (val > IQS626_MISC_A_GPIO3_SELECT_MAX) { dev_err(&client->dev, "Invalid GPIO3 selection: %u\n", val); return -EINVAL; } sys_reg->misc_a &= ~IQS626_MISC_A_GPIO3_SELECT_MASK; sys_reg->misc_a |= val; } if (!device_property_read_u32(&client->dev, "azoteq,reseed-select", &val)) { if (val > IQS626_MISC_B_RESEED_UI_SEL_MAX) { dev_err(&client->dev, "Invalid reseed selection: %u\n", val); return -EINVAL; } sys_reg->misc_b &= ~IQS626_MISC_B_RESEED_UI_SEL_MASK; sys_reg->misc_b |= (val << IQS626_MISC_B_RESEED_UI_SEL_SHIFT); } sys_reg->misc_b &= ~IQS626_MISC_B_THRESH_EXTEND; if (device_property_present(&client->dev, "azoteq,thresh-extend")) sys_reg->misc_b |= IQS626_MISC_B_THRESH_EXTEND; sys_reg->misc_b &= ~IQS626_MISC_B_TRACKING_UI_ENABLE; if (device_property_present(&client->dev, "azoteq,tracking-enable")) sys_reg->misc_b |= IQS626_MISC_B_TRACKING_UI_ENABLE; sys_reg->misc_b &= ~IQS626_MISC_B_RESEED_OFFSET; if (device_property_present(&client->dev, "azoteq,reseed-offset")) sys_reg->misc_b |= IQS626_MISC_B_RESEED_OFFSET; if (!device_property_read_u32(&client->dev, "azoteq,rate-np-ms", &val)) { if (val > IQS626_RATE_NP_MS_MAX) { dev_err(&client->dev, "Invalid report rate: %u\n", val); return -EINVAL; } sys_reg->rate_np = val; } if (!device_property_read_u32(&client->dev, "azoteq,rate-lp-ms", &val)) { if (val > IQS626_RATE_LP_MS_MAX) { dev_err(&client->dev, "Invalid report rate: %u\n", val); return -EINVAL; } sys_reg->rate_lp = val; } if (!device_property_read_u32(&client->dev, "azoteq,rate-ulp-ms", &val)) { if (val > IQS626_RATE_ULP_MS_MAX) { dev_err(&client->dev, "Invalid report rate: %u\n", val); return -EINVAL; } sys_reg->rate_ulp = val / 16; } if (!device_property_read_u32(&client->dev, "azoteq,timeout-pwr-ms", &val)) { if (val > IQS626_TIMEOUT_PWR_MS_MAX) { dev_err(&client->dev, "Invalid timeout: %u\n", val); return -EINVAL; } sys_reg->timeout_pwr = val / 512; } if (!device_property_read_u32(&client->dev, "azoteq,timeout-lta-ms", &val)) { if (val > IQS626_TIMEOUT_LTA_MS_MAX) { dev_err(&client->dev, "Invalid timeout: %u\n", val); return -EINVAL; } sys_reg->timeout_lta = val / 512; } sys_reg->event_mask = ~((u8)IQS626_EVENT_MASK_SYS); sys_reg->redo_ati = 0; sys_reg->reseed = 0; sys_reg->active = 0; for (i = 0; i < ARRAY_SIZE(iqs626_channels); i++) { ch_node = device_get_named_child_node(&client->dev, iqs626_channels[i].name); if (!ch_node) continue; error = iqs626_parse_channel(iqs626, ch_node, i); fwnode_handle_put(ch_node); if (error) return error; sys_reg->active |= iqs626_channels[i].active; } general |= IQS626_SYS_SETTINGS_EVENT_MODE; /* * Enable streaming during normal-power mode if the trackpad is used to * report raw coordinates instead of gestures. In that case, the device * returns to event mode during low-power mode. */ if (sys_reg->active & iqs626_channels[IQS626_CH_TP_2].active && sys_reg->event_mask & IQS626_EVENT_MASK_GESTURE) general |= IQS626_SYS_SETTINGS_EVENT_MODE_LP; general |= IQS626_SYS_SETTINGS_REDO_ATI; general |= IQS626_SYS_SETTINGS_ACK_RESET; sys_reg->general = cpu_to_be16(general); error = regmap_raw_write(iqs626->regmap, IQS626_SYS_SETTINGS, &iqs626->sys_reg, sizeof(iqs626->sys_reg)); if (error) return error; iqs626_irq_wait(); return 0; } static int iqs626_input_init(struct iqs626_private *iqs626) { struct iqs626_sys_reg *sys_reg = &iqs626->sys_reg; struct i2c_client *client = iqs626->client; int error, i, j; iqs626->keypad = devm_input_allocate_device(&client->dev); if (!iqs626->keypad) return -ENOMEM; iqs626->keypad->keycodemax = ARRAY_SIZE(iqs626->kp_code); iqs626->keypad->keycode = iqs626->kp_code; iqs626->keypad->keycodesize = sizeof(**iqs626->kp_code); iqs626->keypad->name = "iqs626a_keypad"; iqs626->keypad->id.bustype = BUS_I2C; for (i = 0; i < ARRAY_SIZE(iqs626_channels); i++) { if (!(sys_reg->active & iqs626_channels[i].active)) continue; for (j = 0; j < ARRAY_SIZE(iqs626_events); j++) { if (!iqs626->kp_type[i][j]) continue; input_set_capability(iqs626->keypad, iqs626->kp_type[i][j], iqs626->kp_code[i][j]); } } if (!(sys_reg->active & iqs626_channels[IQS626_CH_TP_2].active)) return 0; iqs626->trackpad = devm_input_allocate_device(&client->dev); if (!iqs626->trackpad) return -ENOMEM; iqs626->trackpad->keycodemax = ARRAY_SIZE(iqs626->tp_code); iqs626->trackpad->keycode = iqs626->tp_code; iqs626->trackpad->keycodesize = sizeof(*iqs626->tp_code); iqs626->trackpad->name = "iqs626a_trackpad"; iqs626->trackpad->id.bustype = BUS_I2C; /* * Present the trackpad as a traditional pointing device if no gestures * have been mapped to a keycode. */ if (sys_reg->event_mask & IQS626_EVENT_MASK_GESTURE) { u8 tp_mask = iqs626_channels[IQS626_CH_TP_3].active; input_set_capability(iqs626->trackpad, EV_KEY, BTN_TOUCH); input_set_abs_params(iqs626->trackpad, ABS_Y, 0, 255, 0, 0); if ((sys_reg->active & tp_mask) == tp_mask) input_set_abs_params(iqs626->trackpad, ABS_X, 0, 255, 0, 0); else input_set_abs_params(iqs626->trackpad, ABS_X, 0, 128, 0, 0); touchscreen_parse_properties(iqs626->trackpad, false, &iqs626->prop); } else { for (i = 0; i < IQS626_NUM_GESTURES; i++) if (iqs626->tp_code[i] != KEY_RESERVED) input_set_capability(iqs626->trackpad, EV_KEY, iqs626->tp_code[i]); } error = input_register_device(iqs626->trackpad); if (error) dev_err(&client->dev, "Failed to register trackpad: %d\n", error); return error; } static int iqs626_report(struct iqs626_private *iqs626) { struct iqs626_sys_reg *sys_reg = &iqs626->sys_reg; struct i2c_client *client = iqs626->client; struct iqs626_flags flags; __le16 hall_output; int error, i, j; u8 state; u8 *dir_mask = &flags.states[IQS626_ST_OFFS_DIR]; error = regmap_raw_read(iqs626->regmap, IQS626_SYS_FLAGS, &flags, sizeof(flags)); if (error) { dev_err(&client->dev, "Failed to read device status: %d\n", error); return error; } /* * The device resets itself if its own watchdog bites, which can happen * in the event of an I2C communication error. In this case, the device * asserts a SHOW_RESET interrupt and all registers must be restored. */ if (be16_to_cpu(flags.system) & IQS626_SYS_FLAGS_SHOW_RESET) { dev_err(&client->dev, "Unexpected device reset\n"); error = regmap_raw_write(iqs626->regmap, IQS626_SYS_SETTINGS, sys_reg, sizeof(*sys_reg)); if (error) dev_err(&client->dev, "Failed to re-initialize device: %d\n", error); return error; } if (be16_to_cpu(flags.system) & IQS626_SYS_FLAGS_IN_ATI) return 0; /* * Unlike the ULP or generic channels, the Hall channel does not have a * direction flag. Instead, the direction (i.e. magnet polarity) can be * derived based on the sign of the 2's complement differential output. */ if (sys_reg->active & iqs626_channels[IQS626_CH_HALL].active) { error = regmap_raw_read(iqs626->regmap, IQS626_HALL_OUTPUT, &hall_output, sizeof(hall_output)); if (error) { dev_err(&client->dev, "Failed to read Hall output: %d\n", error); return error; } *dir_mask &= ~iqs626_channels[IQS626_CH_HALL].active; if (le16_to_cpu(hall_output) < 0x8000) *dir_mask |= iqs626_channels[IQS626_CH_HALL].active; } for (i = 0; i < ARRAY_SIZE(iqs626_channels); i++) { if (!(sys_reg->active & iqs626_channels[i].active)) continue; for (j = 0; j < ARRAY_SIZE(iqs626_events); j++) { if (!iqs626->kp_type[i][j]) continue; state = flags.states[iqs626_events[j].st_offs]; state &= iqs626_events[j].dir_up ? *dir_mask : ~(*dir_mask); state &= iqs626_channels[i].active; input_event(iqs626->keypad, iqs626->kp_type[i][j], iqs626->kp_code[i][j], !!state); } } input_sync(iqs626->keypad); /* * The following completion signals that ATI has finished, any initial * switch states have been reported and the keypad can be registered. */ complete_all(&iqs626->ati_done); if (!(sys_reg->active & iqs626_channels[IQS626_CH_TP_2].active)) return 0; if (sys_reg->event_mask & IQS626_EVENT_MASK_GESTURE) { state = flags.states[IQS626_ST_OFFS_TOUCH]; state &= iqs626_channels[IQS626_CH_TP_2].active; input_report_key(iqs626->trackpad, BTN_TOUCH, state); if (state) touchscreen_report_pos(iqs626->trackpad, &iqs626->prop, flags.trackpad_x, flags.trackpad_y, false); } else { for (i = 0; i < IQS626_NUM_GESTURES; i++) input_report_key(iqs626->trackpad, iqs626->tp_code[i], flags.gesture & BIT(i)); if (flags.gesture & GENMASK(IQS626_GESTURE_TAP, 0)) { input_sync(iqs626->trackpad); /* * Momentary gestures are followed by a complementary * release cycle so as to emulate a full keystroke. */ for (i = 0; i < IQS626_GESTURE_HOLD; i++) input_report_key(iqs626->trackpad, iqs626->tp_code[i], 0); } } input_sync(iqs626->trackpad); return 0; } static irqreturn_t iqs626_irq(int irq, void *context) { struct iqs626_private *iqs626 = context; if (iqs626_report(iqs626)) return IRQ_NONE; /* * The device does not deassert its interrupt (RDY) pin until shortly * after receiving an I2C stop condition; the following delay ensures * the interrupt handler does not return before this time. */ iqs626_irq_wait(); return IRQ_HANDLED; } static const struct regmap_config iqs626_regmap_config = { .reg_bits = 8, .val_bits = 16, .max_register = IQS626_MAX_REG, }; static int iqs626_probe(struct i2c_client *client) { struct iqs626_ver_info ver_info; struct iqs626_private *iqs626; int error; iqs626 = devm_kzalloc(&client->dev, sizeof(*iqs626), GFP_KERNEL); if (!iqs626) return -ENOMEM; i2c_set_clientdata(client, iqs626); iqs626->client = client; iqs626->regmap = devm_regmap_init_i2c(client, &iqs626_regmap_config); if (IS_ERR(iqs626->regmap)) { error = PTR_ERR(iqs626->regmap); dev_err(&client->dev, "Failed to initialize register map: %d\n", error); return error; } init_completion(&iqs626->ati_done); error = regmap_raw_read(iqs626->regmap, IQS626_VER_INFO, &ver_info, sizeof(ver_info)); if (error) return error; if (ver_info.prod_num != IQS626_VER_INFO_PROD_NUM) { dev_err(&client->dev, "Unrecognized product number: 0x%02X\n", ver_info.prod_num); return -EINVAL; } error = iqs626_parse_prop(iqs626); if (error) return error; error = iqs626_input_init(iqs626); if (error) return error; error = devm_request_threaded_irq(&client->dev, client->irq, NULL, iqs626_irq, IRQF_ONESHOT, client->name, iqs626); if (error) { dev_err(&client->dev, "Failed to request IRQ: %d\n", error); return error; } if (!wait_for_completion_timeout(&iqs626->ati_done, msecs_to_jiffies(2000))) { dev_err(&client->dev, "Failed to complete ATI\n"); return -ETIMEDOUT; } /* * The keypad may include one or more switches and is not registered * until ATI is complete and the initial switch states are read. */ error = input_register_device(iqs626->keypad); if (error) dev_err(&client->dev, "Failed to register keypad: %d\n", error); return error; } static int iqs626_suspend(struct device *dev) { struct iqs626_private *iqs626 = dev_get_drvdata(dev); struct i2c_client *client = iqs626->client; unsigned int val; int error; if (!iqs626->suspend_mode) return 0; disable_irq(client->irq); /* * Automatic power mode switching must be disabled before the device is * forced into any particular power mode. In this case, the device will * transition into normal-power mode. */ error = regmap_update_bits(iqs626->regmap, IQS626_SYS_SETTINGS, IQS626_SYS_SETTINGS_DIS_AUTO, ~0); if (error) goto err_irq; /* * The following check ensures the device has completed its transition * into normal-power mode before a manual mode switch is performed. */ error = regmap_read_poll_timeout(iqs626->regmap, IQS626_SYS_FLAGS, val, !(val & IQS626_SYS_FLAGS_PWR_MODE_MASK), IQS626_PWR_MODE_POLL_SLEEP_US, IQS626_PWR_MODE_POLL_TIMEOUT_US); if (error) goto err_irq; error = regmap_update_bits(iqs626->regmap, IQS626_SYS_SETTINGS, IQS626_SYS_SETTINGS_PWR_MODE_MASK, iqs626->suspend_mode << IQS626_SYS_SETTINGS_PWR_MODE_SHIFT); if (error) goto err_irq; /* * This last check ensures the device has completed its transition into * the desired power mode to prevent any spurious interrupts from being * triggered after iqs626_suspend has already returned. */ error = regmap_read_poll_timeout(iqs626->regmap, IQS626_SYS_FLAGS, val, (val & IQS626_SYS_FLAGS_PWR_MODE_MASK) == (iqs626->suspend_mode << IQS626_SYS_FLAGS_PWR_MODE_SHIFT), IQS626_PWR_MODE_POLL_SLEEP_US, IQS626_PWR_MODE_POLL_TIMEOUT_US); err_irq: iqs626_irq_wait(); enable_irq(client->irq); return error; } static int iqs626_resume(struct device *dev) { struct iqs626_private *iqs626 = dev_get_drvdata(dev); struct i2c_client *client = iqs626->client; unsigned int val; int error; if (!iqs626->suspend_mode) return 0; disable_irq(client->irq); error = regmap_update_bits(iqs626->regmap, IQS626_SYS_SETTINGS, IQS626_SYS_SETTINGS_PWR_MODE_MASK, 0); if (error) goto err_irq; /* * This check ensures the device has returned to normal-power mode * before automatic power mode switching is re-enabled. */ error = regmap_read_poll_timeout(iqs626->regmap, IQS626_SYS_FLAGS, val, !(val & IQS626_SYS_FLAGS_PWR_MODE_MASK), IQS626_PWR_MODE_POLL_SLEEP_US, IQS626_PWR_MODE_POLL_TIMEOUT_US); if (error) goto err_irq; error = regmap_update_bits(iqs626->regmap, IQS626_SYS_SETTINGS, IQS626_SYS_SETTINGS_DIS_AUTO, 0); if (error) goto err_irq; /* * This step reports any events that may have been "swallowed" as a * result of polling PWR_MODE (which automatically acknowledges any * pending interrupts). */ error = iqs626_report(iqs626); err_irq: iqs626_irq_wait(); enable_irq(client->irq); return error; } static DEFINE_SIMPLE_DEV_PM_OPS(iqs626_pm, iqs626_suspend, iqs626_resume); static const struct of_device_id iqs626_of_match[] = { { .compatible = "azoteq,iqs626a" }, { } }; MODULE_DEVICE_TABLE(of, iqs626_of_match); static struct i2c_driver iqs626_i2c_driver = { .driver = { .name = "iqs626a", .of_match_table = iqs626_of_match, .pm = pm_sleep_ptr(&iqs626_pm), }, .probe = iqs626_probe, }; module_i2c_driver(iqs626_i2c_driver); MODULE_AUTHOR("Jeff LaBundy "); MODULE_DESCRIPTION("Azoteq IQS626A Capacitive Touch Controller"); MODULE_LICENSE("GPL");