/* SPDX-License-Identifier: GPL-2.0-or-later */ /* * Copyright (C) 2013 Imagination Technologies * Author: Paul Burton */ #ifndef __MIPS_ASM_MIPS_CPS_H__ # error Please include asm/mips-cps.h rather than asm/mips-cpc.h #endif #ifndef __MIPS_ASM_MIPS_CPC_H__ #define __MIPS_ASM_MIPS_CPC_H__ #include #include /* The base address of the CPC registers */ extern void __iomem *mips_cpc_base; /** * mips_cpc_default_phys_base - retrieve the default physical base address of * the CPC * * Returns the default physical base address of the Cluster Power Controller * memory mapped registers. This is platform dependent & must therefore be * implemented per-platform. */ extern phys_addr_t mips_cpc_default_phys_base(void); /** * mips_cpc_probe - probe for a Cluster Power Controller * * Attempt to detect the presence of a Cluster Power Controller. Returns 0 if * a CPC is successfully detected, else -errno. */ #ifdef CONFIG_MIPS_CPC extern int mips_cpc_probe(void); #else static inline int mips_cpc_probe(void) { return -ENODEV; } #endif /** * mips_cpc_present - determine whether a Cluster Power Controller is present * * Returns true if a CPC is present in the system, else false. */ static inline bool mips_cpc_present(void) { #ifdef CONFIG_MIPS_CPC return mips_cpc_base != NULL; #else return false; #endif } /* Offsets from the CPC base address to various control blocks */ #define MIPS_CPC_GCB_OFS 0x0000 #define MIPS_CPC_CLCB_OFS 0x2000 #define MIPS_CPC_COCB_OFS 0x4000 #define CPC_ACCESSOR_RO(sz, off, name) \ CPS_ACCESSOR_RO(cpc, sz, MIPS_CPC_GCB_OFS + off, name) \ CPS_ACCESSOR_RO(cpc, sz, MIPS_CPC_COCB_OFS + off, redir_##name) #define CPC_ACCESSOR_RW(sz, off, name) \ CPS_ACCESSOR_RW(cpc, sz, MIPS_CPC_GCB_OFS + off, name) \ CPS_ACCESSOR_RW(cpc, sz, MIPS_CPC_COCB_OFS + off, redir_##name) #define CPC_CX_ACCESSOR_RO(sz, off, name) \ CPS_ACCESSOR_RO(cpc, sz, MIPS_CPC_CLCB_OFS + off, cl_##name) \ CPS_ACCESSOR_RO(cpc, sz, MIPS_CPC_COCB_OFS + off, co_##name) #define CPC_CX_ACCESSOR_RW(sz, off, name) \ CPS_ACCESSOR_RW(cpc, sz, MIPS_CPC_CLCB_OFS + off, cl_##name) \ CPS_ACCESSOR_RW(cpc, sz, MIPS_CPC_COCB_OFS + off, co_##name) /* CPC_ACCESS - Control core/IOCU access to CPC registers prior to CM 3 */ CPC_ACCESSOR_RW(32, 0x000, access) /* CPC_SEQDEL - Configure delays between command sequencer steps */ CPC_ACCESSOR_RW(32, 0x008, seqdel) /* CPC_RAIL - Configure the delay from rail power-up to stability */ CPC_ACCESSOR_RW(32, 0x010, rail) /* CPC_RESETLEN - Configure the length of reset sequences */ CPC_ACCESSOR_RW(32, 0x018, resetlen) /* CPC_REVISION - Indicates the revisison of the CPC */ CPC_ACCESSOR_RO(32, 0x020, revision) /* CPC_PWRUP_CTL - Control power to the Coherence Manager (CM) */ CPC_ACCESSOR_RW(32, 0x030, pwrup_ctl) #define CPC_PWRUP_CTL_CM_PWRUP BIT(0) /* CPC_CONFIG - Mirrors GCR_CONFIG */ CPC_ACCESSOR_RW(64, 0x138, config) /* CPC_SYS_CONFIG - Control cluster endianness */ CPC_ACCESSOR_RW(32, 0x140, sys_config) #define CPC_SYS_CONFIG_BE_IMMEDIATE BIT(2) #define CPC_SYS_CONFIG_BE_STATUS BIT(1) #define CPC_SYS_CONFIG_BE BIT(0) /* CPC_Cx_CMD - Instruct the CPC to take action on a core */ CPC_CX_ACCESSOR_RW(32, 0x000, cmd) #define CPC_Cx_CMD GENMASK(3, 0) #define CPC_Cx_CMD_CLOCKOFF 0x1 #define CPC_Cx_CMD_PWRDOWN 0x2 #define CPC_Cx_CMD_PWRUP 0x3 #define CPC_Cx_CMD_RESET 0x4 /* CPC_Cx_STAT_CONF - Indicates core configuration & state */ CPC_CX_ACCESSOR_RW(32, 0x008, stat_conf) #define CPC_Cx_STAT_CONF_PWRUPE BIT(23) #define CPC_Cx_STAT_CONF_SEQSTATE GENMASK(22, 19) #define CPC_Cx_STAT_CONF_SEQSTATE_D0 0x0 #define CPC_Cx_STAT_CONF_SEQSTATE_U0 0x1 #define CPC_Cx_STAT_CONF_SEQSTATE_U1 0x2 #define CPC_Cx_STAT_CONF_SEQSTATE_U2 0x3 #define CPC_Cx_STAT_CONF_SEQSTATE_U3 0x4 #define CPC_Cx_STAT_CONF_SEQSTATE_U4 0x5 #define CPC_Cx_STAT_CONF_SEQSTATE_U5 0x6 #define CPC_Cx_STAT_CONF_SEQSTATE_U6 0x7 #define CPC_Cx_STAT_CONF_SEQSTATE_D1 0x8 #define CPC_Cx_STAT_CONF_SEQSTATE_D3 0x9 #define CPC_Cx_STAT_CONF_SEQSTATE_D2 0xa #define CPC_Cx_STAT_CONF_CLKGAT_IMPL BIT(17) #define CPC_Cx_STAT_CONF_PWRDN_IMPL BIT(16) #define CPC_Cx_STAT_CONF_EJTAG_PROBE BIT(15) /* CPC_Cx_OTHER - Configure the core-other register block prior to CM 3 */ CPC_CX_ACCESSOR_RW(32, 0x010, other) #define CPC_Cx_OTHER_CORENUM GENMASK(23, 16) /* CPC_Cx_VP_STOP - Stop Virtual Processors (VPs) within a core from running */ CPC_CX_ACCESSOR_RW(32, 0x020, vp_stop) /* CPC_Cx_VP_START - Start Virtual Processors (VPs) within a core running */ CPC_CX_ACCESSOR_RW(32, 0x028, vp_run) /* CPC_Cx_VP_RUNNING - Indicate which Virtual Processors (VPs) are running */ CPC_CX_ACCESSOR_RW(32, 0x030, vp_running) /* CPC_Cx_CONFIG - Mirrors GCR_Cx_CONFIG */ CPC_CX_ACCESSOR_RW(32, 0x090, config) #ifdef CONFIG_MIPS_CPC /** * mips_cpc_lock_other - lock access to another core * core: the other core to be accessed * * Call before operating upon a core via the 'other' register region in * order to prevent the region being moved during access. Must be called * within the bounds of a mips_cm_{lock,unlock}_other pair, and followed * by a call to mips_cpc_unlock_other. */ extern void mips_cpc_lock_other(unsigned int core); /** * mips_cpc_unlock_other - unlock access to another core * * Call after operating upon another core via the 'other' register region. * Must be called after mips_cpc_lock_other. */ extern void mips_cpc_unlock_other(void); #else /* !CONFIG_MIPS_CPC */ static inline void mips_cpc_lock_other(unsigned int core) { } static inline void mips_cpc_unlock_other(void) { } #endif /* !CONFIG_MIPS_CPC */ #endif /* __MIPS_ASM_MIPS_CPC_H__ */