/*- * Copyright (c) 2016 Andriy Voskoboinyk * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. */ #include __FBSDID("$FreeBSD$"); #include "opt_wlan.h" #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #ifndef RTWN_WITHOUT_UCODE void r12a_fw_reset(struct rtwn_softc *sc, int reason) { /* Reset MCU IO wrapper. */ rtwn_setbits_1(sc, R92C_RSV_CTRL, R92C_RSV_CTRL_WLOCK_00, 0); rtwn_setbits_1(sc, R92C_RSV_CTRL + 1, 0x08, 0); rtwn_setbits_1_shift(sc, R92C_SYS_FUNC_EN, R92C_SYS_FUNC_EN_CPUEN, 0, 1); /* Enable MCU IO wrapper. */ rtwn_setbits_1(sc, R92C_RSV_CTRL, R92C_RSV_CTRL_WLOCK_00, 0); rtwn_setbits_1(sc, R92C_RSV_CTRL + 1, 0, 0x08); rtwn_setbits_1_shift(sc, R92C_SYS_FUNC_EN, 0, R92C_SYS_FUNC_EN_CPUEN, 1); } void r12a_fw_download_enable(struct rtwn_softc *sc, int enable) { if (enable) { /* MCU firmware download enable. */ rtwn_setbits_1(sc, R92C_MCUFWDL, 0, R92C_MCUFWDL_EN); /* 8051 reset. */ rtwn_setbits_1_shift(sc, R92C_MCUFWDL, R92C_MCUFWDL_ROM_DLEN, 0, 2); } else { /* MCU download disable. */ rtwn_setbits_1(sc, R92C_MCUFWDL, R92C_MCUFWDL_EN, 0); } } void r12a_set_media_status(struct rtwn_softc *sc, int macid) { struct r12a_fw_cmd_msrrpt status; int error; if (macid & RTWN_MACID_VALID) status.msrb0 = R12A_MSRRPT_B0_ASSOC; else status.msrb0 = R12A_MSRRPT_B0_DISASSOC; status.macid = (macid & ~RTWN_MACID_VALID); status.macid_end = 0; error = r88e_fw_cmd(sc, R12A_CMD_MSR_RPT, &status, sizeof(status)); if (error != 0) device_printf(sc->sc_dev, "cannot change media status!\n"); } int r12a_set_pwrmode(struct rtwn_softc *sc, struct ieee80211vap *vap, int off) { struct r12a_fw_cmd_pwrmode mode; int error; if (off && vap->iv_state == IEEE80211_S_RUN && (vap->iv_flags & IEEE80211_F_PMGTON)) { mode.mode = R88E_PWRMODE_LEG; /* * TODO: switch to RFOFF state * (something is missing here - Rx stops with it). */ #ifdef RTWN_TODO mode.pwr_state = R88E_PWRMODE_STATE_RFOFF; #else mode.pwr_state = R88E_PWRMODE_STATE_RFON; #endif } else { mode.mode = R88E_PWRMODE_CAM; mode.pwr_state = R88E_PWRMODE_STATE_ALLON; } mode.pwrb1 = SM(R88E_PWRMODE_B1_SMART_PS, R88E_PWRMODE_B1_LEG_NULLDATA) | SM(R88E_PWRMODE_B1_RLBM, R88E_PWRMODE_B1_MODE_MIN); /* XXX ignored */ mode.bcn_pass = 0; mode.queue_uapsd = 0; mode.pwrb5 = R12A_PWRMODE_B5_NO_BTCOEX; error = r88e_fw_cmd(sc, R12A_CMD_SET_PWRMODE, &mode, sizeof(mode)); if (error != 0) { device_printf(sc->sc_dev, "%s: CMD_SET_PWRMODE was not sent, error %d\n", __func__, error); } return (error); } void r12a_iq_calib_fw(struct rtwn_softc *sc) { struct r12a_softc *rs = sc->sc_priv; struct ieee80211_channel *c = sc->sc_ic.ic_curchan; struct r12a_fw_cmd_iq_calib cmd; if (rs->rs_flags & R12A_IQK_RUNNING) return; RTWN_DPRINTF(sc, RTWN_DEBUG_CALIB, "Starting IQ calibration (FW)\n"); cmd.chan = rtwn_chan2centieee(c); if (IEEE80211_IS_CHAN_5GHZ(c)) cmd.band_bw = RTWN_CMD_IQ_BAND_5GHZ; else cmd.band_bw = RTWN_CMD_IQ_BAND_2GHZ; /* TODO: 80/160 MHz. */ if (IEEE80211_IS_CHAN_HT40(c)) cmd.band_bw |= RTWN_CMD_IQ_CHAN_WIDTH_40; else cmd.band_bw |= RTWN_CMD_IQ_CHAN_WIDTH_20; cmd.ext_5g_pa_lna = RTWN_CMD_IQ_EXT_PA_5G(rs->ext_pa_5g); cmd.ext_5g_pa_lna |= RTWN_CMD_IQ_EXT_LNA_5G(rs->ext_lna_5g); if (r88e_fw_cmd(sc, R12A_CMD_IQ_CALIBRATE, &cmd, sizeof(cmd)) != 0) { RTWN_DPRINTF(sc, RTWN_DEBUG_CALIB, "error while sending IQ calibration command to FW!\n"); return; } rs->rs_flags |= R12A_IQK_RUNNING; } #endif