/* * Copyright (c) 1993 Herb Peyerl (hpeyerl@novatel.ca) * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. The name of the author may not be used to endorse or promote products * derived from this software withough specific prior written permission * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. * * $Id: if_ep.c,v 1.2 1994/01/10 19:13:47 ats Exp $ */ /* * TODO: * Multi-509 configs. * don't pass unit into epstop. * epintr returns an int for magnum. 0=not for me. 1=for me. -1=whoknows? */ #include "ep.h" #if NEP > 0 #include "bpfilter.h" #include "param.h" #include "systm.h" #include "kernel.h" #include "mbuf.h" #include "socket.h" #include "ioctl.h" #include "errno.h" #include "syslog.h" #include "net/if.h" #include "net/netisr.h" #include "net/if_dl.h" #include "net/if_types.h" #include "net/netisr.h" #ifdef INET #include "netinet/in.h" #include "netinet/in_systm.h" #include "netinet/in_var.h" #include "netinet/ip.h" #include "netinet/if_ether.h" #endif #ifdef NS #include "netns/ns.h" #include "netns/ns_if.h" #endif #if NBPFILTER > 0 #include "net/bpf.h" #include "net/bpfdesc.h" #endif #include "i386/include/pio.h" #include "i386/isa/isa.h" #include "i386/isa/isa_device.h" #include "i386/isa/icu.h" #include "i386/isa/if_epreg.h" #define ETHER_MIN_LEN 64 #define ETHER_MAX_LEN 1518 #define ETHER_ADDR_LEN 6 /* * Ethernet software status per interface. */ struct ep_softc { struct arpcom arpcom; /* Ethernet common part */ short ep_io_addr; /* i/o bus address */ char ep_connectors; /* Connectors on this card. */ #define MAX_MBS 8 /* # of mbufs we keep around */ struct mbuf *mb[MAX_MBS]; /* spare mbuf storage. */ int next_mb; /* Which mbuf to use next. */ int last_mb; /* Last mbuf. */ int tx_start_thresh; /* Current TX_start_thresh. */ caddr_t bpf; /* BPF "magic cookie" */ } ep_softc[NEP]; void epinit(int); void epreset(int, int); void epwatchdog(int); void epstop(int); void epintr(int); void epstart(struct ifnet *); void epread(struct ep_softc *); int epprobe(struct isa_device *); int ether_output(), epattach(), epioctl(); static void send_ID_sequence(u_short); static u_short get_eeprom_data(int, int); static int is_eeprom_busy(struct isa_device *); static void fill_mbuf_queue(caddr_t, int); struct isa_driver epdriver = { epprobe, epattach, "ep" }; /* * Rudimentary support for multiple cards is here but is not * currently handled. In the future we will have to add code * for tagging the cards for later activation. We wanna do something * about the id_port. We're limited due to current config procedure. * Magnum config holds promise of a fix but we'll have to wait a bit. */ int epprobe(is) struct isa_device *is; { struct ep_softc *sc = &ep_softc[is->id_unit]; u_short k; int id_port = 0x100; /* XXX */ outw(BASE+EP_COMMAND, GLOBAL_RESET); DELAY(1000); outb(id_port, 0xc0); /* Global reset to id_port. */ DELAY(1000); send_ID_sequence(id_port); DELAY(1000); /* * MFG_ID should have 0x6d50. * PROD_ID should be 0x9[0-f]50 */ k = get_eeprom_data(id_port, EEPROM_MFG_ID); if (k != MFG_ID) return(0); k = get_eeprom_data(id_port, EEPROM_PROD_ID); if ((k & 0xf0ff) != (PROD_ID & 0xf0ff)) return(0); k = get_eeprom_data(id_port, EEPROM_ADDR_CFG); /* get addr cfg */ k = (k & 0x1f)*0x10+0x200; /* decode base addr. */ if (k != (u_short) is->id_iobase) return(0); k = get_eeprom_data(id_port, EEPROM_RESOURCE_CFG); k >>= 12; if (is->id_irq != (1<<((k==2) ? 9 : k))) return(0); outb(id_port, ACTIVATE_ADAPTER_TO_CONFIG); return(0x10); /* 16 bytes of I/O space used. */ } int epattach(is) struct isa_device *is; { struct ep_softc *sc = &ep_softc[is->id_unit]; struct ifnet *ifp = &sc->arpcom.ac_if; u_short i; struct ifaddr *ifa; struct sockaddr_dl *sdl; ifp->if_unit = is->id_unit; ifp->if_name = "ep" ; ifp->if_mtu = ETHERMTU; ifp->if_flags = IFF_BROADCAST | IFF_SIMPLEX | IFF_NOTRAILERS; ifp->if_init = epinit; ifp->if_output = ether_output; ifp->if_start = epstart; ifp->if_ioctl = epioctl; ifp->if_watchdog = epwatchdog; if_attach(ifp); /* * Fill the hardware address into ifa_addr if we find an AF_LINK entry. * We need to do this so bpf's can get the hardware addr of this card. * netstat likes this too! */ ifa = ifp->if_addrlist; while ((ifa != 0) && (ifa->ifa_addr != 0) && (ifa->ifa_addr->sa_family != AF_LINK)) ifa = ifa->ifa_next; if ((ifa != 0) && (ifa->ifa_addr != 0)) { sdl = (struct sockaddr_dl *)ifa->ifa_addr; sdl->sdl_type = IFT_ETHER; sdl->sdl_alen = ETHER_ADDR_LEN; sdl->sdl_slen = 0; bcopy(sc->arpcom.ac_enaddr, LLADDR(sdl), ETHER_ADDR_LEN); } sc->ep_io_addr = is->id_iobase; sc->ep_connectors = 0; i=inw(is->id_iobase+EP_W0_CONFIG_CTRL); printf("ep%d: ", is->id_unit); if (i & IS_AUI) { if (sc->ep_connectors) printf("/"); printf("aui"); sc->ep_connectors |= AUI; } if (i & IS_BNC) { if (sc->ep_connectors) printf("/"); printf("bnc"); sc->ep_connectors |= BNC; } if (i & IS_UTP) { if (sc->ep_connectors) printf("/"); printf("utp"); sc->ep_connectors |= UTP; } if (!sc->ep_connectors) printf("!no connectors!"); /* * Read the station address from the eeprom */ for (i=0; i<3; i++) { u_short *p; GO_WINDOW(0); if (is_eeprom_busy(is)) return 0; outw(BASE+EP_W0_EEPROM_COMMAND, READ_EEPROM | i); if (is_eeprom_busy(is)) return 0; p =(u_short *)&sc->arpcom.ac_enaddr[i*2]; *p=htons(inw(BASE+EP_W0_EEPROM_DATA)); GO_WINDOW(2); outw(BASE+EP_W2_ADDR_0+(i*2), ntohs(*p)); } printf(" address %s\n", ether_sprintf(sc->arpcom.ac_enaddr)); #if NBPFILTER > 0 bpfattach(&sc->bpf, ifp, DLT_EN10MB, sizeof(struct ether_header)); #endif return 1; } /* The order in here seems important. Otherwise we may not receive interrupts. ?! */ void epinit(unit) int unit; { register struct ep_softc *sc = &ep_softc[unit]; register struct ifnet *ifp = &sc->arpcom.ac_if; int s,i; if (ifp->if_addrlist == (struct ifaddr *) 0) { printf("ep: address not known...\n"); return; } s=splimp(); while (inb(BASE+EP_STATUS) & S_COMMAND_IN_PROGRESS) ; GO_WINDOW(0); outw(BASE+EP_W0_CONFIG_CTRL, 0); /* Disable the card */ outw(BASE+EP_W0_CONFIG_CTRL, ENABLE_DRQ_IRQ); /* Enable the card */ GO_WINDOW(2); for(i=0;i<6;i++) /* Reload the ether_addr. */ outb(BASE+EP_W2_ADDR_0+i, sc->arpcom.ac_enaddr[i]); outw(BASE+EP_COMMAND, RX_RESET); outw(BASE+EP_COMMAND, TX_RESET); GO_WINDOW(1); /* Window 1 is operating window */ for(i=0;i<31;i++) inb(BASE+EP_W1_TX_STATUS); outw(BASE+EP_COMMAND, ACK_INTR | 0xff); /* get rid of stray intr's */ outw(BASE+EP_COMMAND, SET_RD_0_MASK | S_CARD_FAILURE | S_RX_COMPLETE | S_TX_COMPLETE | S_TX_AVAIL); outw(BASE+EP_COMMAND, SET_INTR_MASK | S_CARD_FAILURE | S_RX_COMPLETE | S_TX_COMPLETE | S_TX_AVAIL); outw(BASE+EP_COMMAND, SET_RX_FILTER | FIL_INDIVIDUAL | FIL_GROUP | FIL_BRDCST); if (!(ifp->if_flags & IFF_ALTPHYS) && (sc->ep_connectors & BNC)) { /* Want BNC? */ outw(BASE+EP_COMMAND, START_TRANSCEIVER); DELAY(1000); #ifdef EP_DEBUG printf("ed0: selected BNC\n"); #endif } if (!(ifp->if_flags & IFF_ALTPHYS) && (sc->ep_connectors & UTP)) { /* Want UTP? */ GO_WINDOW(4); outw(BASE+EP_W4_MEDIA_TYPE, ENABLE_UTP); GO_WINDOW(1); #ifdef EP_DEBUG printf("ed0: selected UTP\n"); #endif } outw(BASE+EP_COMMAND, RX_ENABLE); outw(BASE+EP_COMMAND, TX_ENABLE); ifp->if_flags |= IFF_RUNNING; ifp->if_flags &= ~IFF_OACTIVE; /* just in case */ sc->tx_start_thresh = 20; /* probably a good starting point. */ /* * Store up a bunch of mbuf's for use later. (MAX_MBS). First we * free up any that we had in case we're being called from intr or * somewhere else. */ sc->last_mb = 0; sc->next_mb = 0; fill_mbuf_queue((caddr_t) sc, 0); epstart(ifp); (void) splx(s); } void epstart(ifp) struct ifnet *ifp; { register struct ep_softc *sc = &ep_softc[ifp->if_unit]; struct mbuf *m, *top; int s, len, pad; s=splimp(); if (sc->arpcom.ac_if.if_flags & IFF_OACTIVE) { splx(s); return; } startagain: m = sc->arpcom.ac_if.if_snd.ifq_head; /* Sneak a peek at the next packet */ if (m == 0) { splx(s); return; } pad = (4-(m->m_pkthdr.len%4)+4)%4; /* icky pooh!! */ if ((inw(BASE+EP_W1_FREE_TX)) < (m->m_pkthdr.len)+pad+4) { /* no room in FIFO */ outw(BASE+EP_COMMAND, SET_TX_AVAIL_THRESH | (m->m_pkthdr.len)+pad+4); sc->arpcom.ac_if.if_flags |= IFF_OACTIVE; splx(s); return; } IF_DEQUEUE(&sc->arpcom.ac_if.if_snd, m); if (m == 0) { /* Could make this go away. */ splx(s); return; } outw(BASE+EP_COMMAND, SET_TX_START_THRESH | (m->m_pkthdr.len/4 + sc->tx_start_thresh)); outw(BASE+EP_W1_TX_PIO_WR_1, m->m_pkthdr.len); outw(BASE+EP_W1_TX_PIO_WR_1, 0xffff); /* Second dword meaningless */ for(top = m; m != 0; m = m->m_next) { outsw(BASE+EP_W1_TX_PIO_WR_1, mtod(m, caddr_t), m->m_len/2); if(m->m_len & 1) outb(BASE+EP_W1_TX_PIO_WR_1, *(mtod(m, caddr_t)+m->m_len-1)); } while (pad--) outb(BASE+EP_W1_TX_PIO_WR_1, 0); /* Padding */ #if NBPFILTER > 0 if (sc->bpf) { u_short etype; int off, datasize, resid; struct ether_header *eh; struct trailer_header { u_short ether_type; u_short ether_residual; } trailer_header; char ether_packet[ETHER_MAX_LEN]; char *ep; ep = ether_packet; /* * We handle trailers below: * Copy ether header first, then residual data, * then data. Put all this in a temporary buffer * 'ether_packet' and send off to bpf. Since the * system has generated this packet, we assume * that all of the offsets in the packet are * correct; if they're not, the system will almost * certainly crash in m_copydata. * We make no assumptions about how the data is * arranged in the mbuf chain (i.e. how much * data is in each mbuf, if mbuf clusters are * used, etc.), which is why we use m_copydata * to get the ether header rather than assume * that this is located in the first mbuf. */ /* copy ether header */ m_copydata(top, 0, sizeof(struct ether_header), ep); eh = (struct ether_header *) ep; ep += sizeof(struct ether_header); etype = ntohs(eh->ether_type); if (etype >= ETHERTYPE_TRAIL && etype < ETHERTYPE_TRAIL+ETHERTYPE_NTRAILER) { datasize = ((etype - ETHERTYPE_TRAIL) << 9); off = datasize + sizeof(struct ether_header); /* copy trailer_header into a data structure */ m_copydata(top, off, sizeof(struct trailer_header), &trailer_header.ether_type); /* copy residual data */ resid = trailer_header.ether_residual - sizeof(struct trailer_header); resid = ntohs(resid); m_copydata(top, off+sizeof(struct trailer_header), resid, ep); ep += resid; /* copy data */ m_copydata(top, sizeof(struct ether_header), datasize, ep); ep += datasize; /* restore original ether packet type */ eh->ether_type = trailer_header.ether_type; bpf_tap(sc->bpf, ether_packet, ep - ether_packet); } else bpf_mtap(sc->bpf, top); } #endif m_freem(top); ++sc->arpcom.ac_if.if_opackets; /* * Is another packet coming in? We don't want to overflow the * tiny RX fifo. */ if (inw(BASE+EP_W1_RX_STATUS) & RX_BYTES_MASK) { splx(s); return; } goto startagain; } void epintr(unit) int unit; { int status, i; register struct ep_softc *sc = &ep_softc[unit]; struct ifnet *ifp = &sc->arpcom.ac_if; struct mbuf *m; status=0; checkintr: status = inw(BASE + EP_STATUS) & (S_TX_COMPLETE|S_TX_AVAIL|S_RX_COMPLETE|S_CARD_FAILURE); if (status == 0) { /* No interrupts. */ outw(BASE+EP_COMMAND, C_INTR_LATCH); return; } outw(BASE+EP_COMMAND, ACK_INTR | status); /* important that we do this first. */ if (status & S_TX_AVAIL) { status &= ~S_TX_AVAIL; inw(BASE+EP_W1_FREE_TX); sc->arpcom.ac_if.if_flags &= ~IFF_OACTIVE; epstart(&sc->arpcom.ac_if); } if (status & S_RX_COMPLETE) { status &= ~S_RX_COMPLETE; epread(sc); } if (status & S_CARD_FAILURE) { printf("ep%d: reset (status: %x)\n", unit, status); outw(BASE+EP_COMMAND, C_INTR_LATCH); epinit(unit); return; } if (status & S_TX_COMPLETE) { status &= ~S_TX_COMPLETE; /* * We need to read TX_STATUS until we get a 0 status in * order to turn off the interrupt flag. */ while ((i=inb(BASE+EP_W1_TX_STATUS)) & TXS_COMPLETE) { outw(BASE+EP_W1_TX_STATUS, 0x0); if (i & (TXS_MAX_COLLISION|TXS_JABBER|TXS_UNDERRUN)) { if (i & TXS_MAX_COLLISION) ++sc->arpcom.ac_if.if_collisions; if (i & (TXS_JABBER|TXS_UNDERRUN)) { outw(BASE+EP_COMMAND, TX_RESET); if(i & TXS_UNDERRUN) { if (sc->tx_start_thresh < ETHER_MAX_LEN) { sc->tx_start_thresh += 20; outw(BASE+EP_COMMAND, SET_TX_START_THRESH | sc->tx_start_thresh); } } } outw(BASE+EP_COMMAND, TX_ENABLE); ++sc->arpcom.ac_if.if_oerrors; } } epstart(ifp); } goto checkintr; } void epread(sc) register struct ep_softc *sc; { struct ether_header *eh; struct mbuf *mcur, *m, *m0, *top; int totlen, lenthisone; int save_totlen; u_short etype; int off, resid; int count, spinwait; int i; totlen = inw(BASE + EP_W1_RX_STATUS); off = 0; top = 0; if (totlen & ERR_RX) { ++sc->arpcom.ac_if.if_ierrors; goto out; } save_totlen = totlen &= RX_BYTES_MASK; /* Lower 10 bits = RX bytes. */ m = sc->mb[sc->next_mb]; sc->mb[sc->next_mb] = 0; if (m == 0) { MGETHDR(m, M_DONTWAIT, MT_DATA); if (m == 0) goto out; } else { /* Convert one of our saved mbuf's */ sc->next_mb = (sc->next_mb + 1) % MAX_MBS; m->m_data = m->m_pktdat; m->m_flags = M_PKTHDR; } top = m0 = m; /* We assign top so we can "goto out" */ # define EROUND ((sizeof(struct ether_header) + 3) & ~3) # define EOFF (EROUND - sizeof(struct ether_header)) m0->m_data += EOFF; /* Read what should be the header. */ insw(BASE+EP_W1_RX_PIO_RD_1, mtod(m0, caddr_t), sizeof(struct ether_header)/2); m->m_len = sizeof(struct ether_header); totlen -= sizeof(struct ether_header); /* * mostly deal with trailer here. (untested) * We do this in a couple of parts. First we check for a trailer, if * we have one we convert the mbuf back to a regular mbuf and set the offset and * subtract sizeof(struct ether_header) from the pktlen. * After we've read the packet off the interface (all except for the trailer * header, we then get a header mbuf, read the trailer into it, and fix up * the mbuf pointer chain. */ eh=mtod(m, struct ether_header *); eh->ether_type = ntohs((u_short)eh->ether_type); if (eh->ether_type >= ETHERTYPE_TRAIL && eh->ether_type < ETHERTYPE_TRAIL+ETHERTYPE_NTRAILER) { m->m_data = m->m_dat; /* Convert back to regular mbuf. */ m->m_flags = 0; /* This sucks but non-trailers are the norm */ off = (eh->ether_type - ETHERTYPE_TRAIL) * 512; if (off >= ETHERMTU) { m_freem(m); return; /* sanity */ } totlen -= sizeof(struct ether_header); /* We don't read the trailer */ m->m_data += 2 * sizeof(u_short); /* Get rid of type & len*/ } while (totlen>0) { lenthisone=min(totlen, M_TRAILINGSPACE(m)); if (lenthisone == 0) { /* no room in this one */ mcur = m; m = sc->mb[sc->next_mb]; sc->mb[sc->next_mb] = 0; if (!m) { MGET(m, M_DONTWAIT, MT_DATA); if (m==0) goto out; } else { timeout(fill_mbuf_queue, (caddr_t) sc, 1); sc->next_mb = (sc->next_mb + 1) % MAX_MBS; } if (totlen >= MINCLSIZE) MCLGET(m, M_DONTWAIT); m->m_len = 0; mcur->m_next = m; lenthisone = min(totlen, M_TRAILINGSPACE(m)); } insw(BASE+EP_W1_RX_PIO_RD_1, mtod(m, caddr_t)+m->m_len, lenthisone/2); m->m_len += lenthisone; if (lenthisone & 1) *(mtod(m, caddr_t)+m->m_len-1) = inb(BASE+EP_W1_RX_PIO_RD_1); totlen -= lenthisone; } if (off) { top = sc->mb[sc->next_mb]; sc->mb[sc->next_mb] = 0; if (top == 0) { MGETHDR(m, M_DONTWAIT, MT_DATA); if (top == 0) goto out; } else { /* Convert one of our saved mbuf's */ sc->next_mb = (sc->next_mb + 1) % MAX_MBS; top->m_data = top->m_pktdat; top->m_flags = M_PKTHDR; } insw(BASE+EP_W1_RX_PIO_RD_1, mtod(m, caddr_t)+m->m_len, sizeof(struct ether_header)); eh->ether_type = ntohs(eh->ether_type); top->m_next = m0; top->m_len = sizeof(struct ether_header); /* XXX Accomodate for type and len from beginning of trailer data */ top->m_pkthdr.len = save_totlen - (2 * sizeof(u_short)); } else { top = m0; top->m_pkthdr.len = save_totlen; } top->m_pkthdr.rcvif = &sc->arpcom.ac_if; outw(BASE+EP_COMMAND, RX_DISCARD_TOP_PACK); while (inb(BASE+EP_STATUS) & S_COMMAND_IN_PROGRESS) ; ++sc->arpcom.ac_if.if_ipackets; m_adj(top, sizeof(struct ether_header)); ether_input(&sc->arpcom.ac_if, eh, top); return; out: outw(BASE+EP_COMMAND, RX_DISCARD_TOP_PACK); while (inb(BASE+EP_STATUS) & S_COMMAND_IN_PROGRESS) ; if (top) m_freem(top); } /* * Look familiar? */ int epioctl(ifp, cmd, data) register struct ifnet *ifp; int cmd; caddr_t data; { register struct ifaddr *ifa = (struct ifaddr *)data; struct ep_softc *sc = &ep_softc[ifp->if_unit]; struct ifreq *ifr = (struct ifreq *)data; int s, error=0; switch(cmd){ case SIOCSIFADDR: ifp->if_flags |= IFF_UP; switch (ifa->ifa_addr->sa_family) { #ifdef INET case AF_INET: epinit(ifp->if_unit); /* before arpwhohas */ ((struct arpcom *)ifp)->ac_ipaddr = IA_SIN(ifa)->sin_addr; arpwhohas((struct arpcom *)ifp, &IA_SIN(ifa)->sin_addr); break; #endif #ifdef NS case AF_NS: { register struct ns_addr *ina = &(IA_SNS(ifa)->sns_addr); if (ns_nullhost(*ina)) ina->x_host = *(union ns_host *)(sc->arpcom.ac_enaddr); else { ifp->if_flags &= ~IFF_RUNNING; bcopy((caddr_t)ina->x_host.c_host, (caddr_t)sc->arpcom.ac_enaddr, sizeof(sc->arpcom.ac_enaddr)); } epinit(ifp->if_unit); break; } #endif default: epinit(ifp->if_unit); break; } break; case SIOCSIFFLAGS: #ifdef EP_DEBUG printf("ep: ioctl SIOCSIFFLAGS = 0x%x\n", ifp->if_flags); #endif if ((ifp->if_flags & IFF_UP) == 0 && ifp->if_flags & IFF_RUNNING) { epstop(ifp->if_unit); ifp->if_flags &= ~IFF_RUNNING; } else if ((ifp->if_flags & IFF_UP) && (ifp->if_flags & IFF_RUNNING) == 0) epinit(ifp->if_unit); break; #ifdef notdef case SIOCGHWADDR: bcopy((caddr_t)sc->sc_addr, (caddr_t) &ifr->ifr_data, sizeof(sc->sc_addr)); break; #endif default: error = EINVAL; } return (error); } void epreset(unit, uban) int unit; int uban; /* XXXX */ { int s; s = splimp(); epstop(unit); epinit(unit); (void) splx(s); } void epwatchdog(unit) int unit; { struct ep_softc *sc = &ep_softc[unit]; log(LOG_ERR, "ep%d: device timeout\n", unit); ++sc->arpcom.ac_if.if_oerrors; epreset(unit, 0); } void epstop(unit) int unit; { struct ep_softc *sc = &ep_softc[unit]; outw(BASE+EP_COMMAND, RX_DISABLE); outw(BASE+EP_COMMAND, RX_DISCARD_TOP_PACK); while (inb(BASE+EP_STATUS) & S_COMMAND_IN_PROGRESS) ; outw(BASE+EP_COMMAND, TX_DISABLE); outw(BASE+EP_COMMAND, STOP_TRANSCEIVER); outw(BASE+EP_COMMAND, RX_RESET); outw(BASE+EP_COMMAND, TX_RESET); outw(BASE+EP_COMMAND, C_INTR_LATCH); outw(BASE+EP_COMMAND, SET_RD_0_MASK); outw(BASE+EP_COMMAND, SET_INTR_MASK); outw(BASE+EP_COMMAND, SET_RX_FILTER); } /* * This is adapted straight from the book. There's probably a better way. */ void send_ID_sequence(port) u_short port; { char cx, al; cx=0x0ff; al=0x0ff; outb(port, 0x0); DELAY(1000); outb(port, 0x0); DELAY(1000); loop1: cx--; outb(port, al); if (!(al & 0x80)) { al=al<<1; goto loop1; } al=al<<1; al^=0xcf; if (cx) goto loop1; } /* * We get eeprom data from the id_port given an offset into the * eeprom. Basically; after the ID_sequence is sent to all of * the cards; they enter the ID_CMD state where they will accept * command requests. 0x80-0xbf loads the eeprom data. We then * read the port 16 times and with every read; the cards check * for contention (ie: if one card writes a 0 bit and another * writes a 1 bit then the host sees a 0. At the end of the cycle; * each card compares the data on the bus; if there is a difference * then that card goes into ID_WAIT state again). In the meantime; * one bit of data is returned in the AX register which is conveniently * returned to us by inb(). Hence; we read 16 times getting one * bit of data with each read. */ static u_short get_eeprom_data(id_port, offset) int id_port; int offset; { int i, data=0; outb(id_port, 0x80+offset); DELAY(1000); for (i=0; i<16; i++) data = (data<<1) | (inw(id_port) & 1); return(data); } static int is_eeprom_busy(is) struct isa_device *is; { int i=0, j; register struct ep_softc *sc = &ep_softc[is->id_unit]; while (i++<100) { j=inw(BASE+EP_W0_EEPROM_COMMAND); if (j & EEPROM_BUSY) DELAY(100); else break; } if (i>=100) { printf("\nep%d: eeprom failed to come ready.\n", is->id_unit); return(1); } if (j & EEPROM_TST_MODE) { printf("\nep%d: 3c509 in test mode. Erase pencil mark!\n", is->id_unit); return(1); } return(0); } static void fill_mbuf_queue(sp, dummy) caddr_t sp; int dummy; { struct ep_softc *sc = (struct ep_softc *) sp; int i=0; if (sc->mb[sc->last_mb]) return; i=sc->last_mb; do { MGET(sc->mb[i], M_DONTWAIT, MT_DATA); if (!sc->mb[i]) break; i = (i+1) % MAX_MBS; } while(i != sc->next_mb); sc->last_mb = i; } #endif /* NEP > 0 */