/*- * Copyright (c) 2003 John Baldwin * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. Neither the name of the author nor the names of any co-contributors * may be used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. */ /* * PIC driver for the 8259A Master and Slave PICs in PC/AT machines. */ #include __FBSDID("$FreeBSD: head/sys/i386/isa/atpic.c 122897 2003-11-19 15:38:56Z jhb $"); #include "opt_auto_eoi.h" #include "opt_isa.h" #include #include #include #include #include #include #include #include #include #include #include #include #include #include #ifdef PC98 #include #else #include #endif #include #define MASTER 0 #define SLAVE 1 /* XXX: Magic numbers */ #ifdef PC98 #ifdef AUTO_EOI_1 #define MASTER_MODE 0x1f /* Master auto EOI, 8086 mode */ #else #define MASTER_MODE 0x1d /* Master 8086 mode */ #endif #define SLAVE_MODE 9 /* 8086 mode */ #else /* IBM-PC */ #ifdef AUTO_EOI_1 #define MASTER_MODE (ICW4_8086 | ICW4_AEOI) #else #define MASTER_MODE ICW4_8086 #endif #ifdef AUTO_EOI_2 #define SLAVE_MODE (ICW4_8086 | ICW4_AEOI) #else #define SLAVE_MODE ICW4_8086 #endif #endif /* PC98 */ static void atpic_init(void *dummy); unsigned int imen; /* XXX */ inthand_t IDTVEC(atpic_intr0), IDTVEC(atpic_intr1), IDTVEC(atpic_intr2), IDTVEC(atpic_intr3), IDTVEC(atpic_intr4), IDTVEC(atpic_intr5), IDTVEC(atpic_intr6), IDTVEC(atpic_intr7), IDTVEC(atpic_intr8), IDTVEC(atpic_intr9), IDTVEC(atpic_intr10), IDTVEC(atpic_intr11), IDTVEC(atpic_intr12), IDTVEC(atpic_intr13), IDTVEC(atpic_intr14), IDTVEC(atpic_intr15); #define IRQ(ap, ai) ((ap)->at_irqbase + (ai)->at_irq) #define ATPIC(io, base, eoi, imenptr) \ { { atpic_enable_source, atpic_disable_source, (eoi), \ atpic_enable_intr, atpic_vector, atpic_source_pending, NULL, \ atpic_resume }, (io), (base), IDT_IO_INTS + (base), (imenptr) } #define INTSRC(irq) \ { { &atpics[(irq) / 8].at_pic }, (irq) % 8, \ IDTVEC(atpic_intr ## irq ) } struct atpic { struct pic at_pic; int at_ioaddr; int at_irqbase; uint8_t at_intbase; uint8_t *at_imen; }; struct atpic_intsrc { struct intsrc at_intsrc; int at_irq; /* Relative to PIC base. */ inthand_t *at_intr; u_long at_count; u_long at_straycount; }; static void atpic_enable_source(struct intsrc *isrc); static void atpic_disable_source(struct intsrc *isrc); static void atpic_eoi_master(struct intsrc *isrc); static void atpic_eoi_slave(struct intsrc *isrc); static void atpic_enable_intr(struct intsrc *isrc); static int atpic_vector(struct intsrc *isrc); static void atpic_resume(struct intsrc *isrc); static int atpic_source_pending(struct intsrc *isrc); static void i8259_init(struct atpic *pic, int slave); static struct atpic atpics[] = { ATPIC(IO_ICU1, 0, atpic_eoi_master, (uint8_t *)&imen), ATPIC(IO_ICU2, 8, atpic_eoi_slave, ((uint8_t *)&imen) + 1) }; static struct atpic_intsrc atintrs[] = { INTSRC(0), INTSRC(1), INTSRC(2), INTSRC(3), INTSRC(4), INTSRC(5), INTSRC(6), INTSRC(7), INTSRC(8), INTSRC(9), INTSRC(10), INTSRC(11), INTSRC(12), INTSRC(13), INTSRC(14), INTSRC(15), }; static void atpic_enable_source(struct intsrc *isrc) { struct atpic_intsrc *ai = (struct atpic_intsrc *)isrc; struct atpic *ap = (struct atpic *)isrc->is_pic; mtx_lock_spin(&icu_lock); *ap->at_imen &= ~(1 << ai->at_irq); outb(ap->at_ioaddr + ICU_IMR_OFFSET, *ap->at_imen); mtx_unlock_spin(&icu_lock); } static void atpic_disable_source(struct intsrc *isrc) { struct atpic_intsrc *ai = (struct atpic_intsrc *)isrc; struct atpic *ap = (struct atpic *)isrc->is_pic; mtx_lock_spin(&icu_lock); *ap->at_imen |= (1 << ai->at_irq); outb(ap->at_ioaddr + ICU_IMR_OFFSET, *ap->at_imen); mtx_unlock_spin(&icu_lock); } static void atpic_eoi_master(struct intsrc *isrc) { KASSERT(isrc->is_pic == &atpics[MASTER].at_pic, ("%s: mismatched pic", __func__)); #ifndef AUTO_EOI_1 mtx_lock_spin(&icu_lock); outb(atpics[MASTER].at_ioaddr, ICU_EOI); mtx_unlock_spin(&icu_lock); #endif } /* * The data sheet says no auto-EOI on slave, but it sometimes works. * So, if AUTO_EOI_2 is enabled, we use it. */ static void atpic_eoi_slave(struct intsrc *isrc) { KASSERT(isrc->is_pic == &atpics[SLAVE].at_pic, ("%s: mismatched pic", __func__)); #ifndef AUTO_EOI_2 mtx_lock_spin(&icu_lock); outb(atpics[SLAVE].at_ioaddr, ICU_EOI); #ifndef AUTO_EOI_1 outb(atpics[MASTER].at_ioaddr, ICU_EOI); #endif mtx_unlock_spin(&icu_lock); #endif } static void atpic_enable_intr(struct intsrc *isrc) { } static int atpic_vector(struct intsrc *isrc) { struct atpic_intsrc *ai = (struct atpic_intsrc *)isrc; struct atpic *ap = (struct atpic *)isrc->is_pic; return (IRQ(ap, ai)); } static int atpic_source_pending(struct intsrc *isrc) { struct atpic_intsrc *ai = (struct atpic_intsrc *)isrc; struct atpic *ap = (struct atpic *)isrc->is_pic; return (inb(ap->at_ioaddr) & (1 << ai->at_irq)); } static void atpic_resume(struct intsrc *isrc) { struct atpic_intsrc *ai = (struct atpic_intsrc *)isrc; struct atpic *ap = (struct atpic *)isrc->is_pic; if (ai->at_irq == 0) i8259_init(ap, ap == &atpics[SLAVE]); } static void i8259_init(struct atpic *pic, int slave) { int imr_addr; /* Reset the PIC and program with next four bytes. */ mtx_lock_spin(&icu_lock); #ifdef DEV_MCA /* MCA uses level triggered interrupts. */ if (MCA_system) outb(pic->at_ioaddr, ICW1_RESET | ICW1_IC4 | ICW1_LTIM); else #endif outb(pic->at_ioaddr, ICW1_RESET | ICW1_IC4); imr_addr = pic->at_ioaddr + ICU_IMR_OFFSET; /* Start vector. */ outb(imr_addr, pic->at_intbase); /* * Setup slave links. For the master pic, indicate what line * the slave is configured on. For the slave indicate * which line on the master we are connected to. */ if (slave) outb(imr_addr, ICU_SLAVEID); /* my slave id is 7 */ else outb(imr_addr, IRQ_SLAVE); /* slave on line 7 */ /* Set mode. */ if (slave) outb(imr_addr, SLAVE_MODE); else outb(imr_addr, MASTER_MODE); /* Set interrupt enable mask. */ outb(imr_addr, *pic->at_imen); /* Reset is finished, default to IRR on read. */ outb(pic->at_ioaddr, OCW3_SEL | OCW3_RR); #ifndef PC98 /* OCW2_L1 sets priority order to 3-7, 0-2 (com2 first). */ if (!slave) outb(pic->at_ioaddr, OCW2_R | OCW2_SL | OCW2_L1); #endif mtx_unlock_spin(&icu_lock); } void atpic_startup(void) { struct atpic_intsrc *ai; int i; /* Start off with all interrupts disabled. */ imen = 0xffff; i8259_init(&atpics[MASTER], 0); i8259_init(&atpics[SLAVE], 1); atpic_enable_source((struct intsrc *)&atintrs[ICU_SLAVEID]); /* Install low-level interrupt handlers for all of our IRQs. */ for (i = 0; i < sizeof(atintrs) / sizeof(struct atpic_intsrc); i++) { if (i == ICU_SLAVEID) continue; ai = &atintrs[i]; ai->at_intsrc.is_count = &ai->at_count; ai->at_intsrc.is_straycount = &ai->at_straycount; setidt(((struct atpic *)ai->at_intsrc.is_pic)->at_intbase + ai->at_irq, ai->at_intr, SDT_SYS386IGT, SEL_KPL, GSEL(GCODE_SEL, SEL_KPL)); } } static void atpic_init(void *dummy __unused) { int i; /* Loop through all interrupt sources and add them. */ for (i = 0; i < sizeof(atintrs) / sizeof(struct atpic_intsrc); i++) { if (i == ICU_SLAVEID) continue; intr_register_source(&atintrs[i].at_intsrc); } } SYSINIT(atpic_init, SI_SUB_INTR, SI_ORDER_SECOND + 1, atpic_init, NULL) void atpic_handle_intr(struct intrframe iframe) { struct intsrc *isrc; KASSERT((uint)iframe.if_vec < ICU_LEN, ("unknown int %d\n", iframe.if_vec)); isrc = &atintrs[iframe.if_vec].at_intsrc; intr_execute_handlers(isrc, &iframe); } #ifdef DEV_ISA /* * Bus attachment for the ISA PIC. */ static struct isa_pnp_id atpic_ids[] = { { 0x0000d041 /* PNP0000 */, "AT interrupt controller" }, { 0 } }; static int atpic_probe(device_t dev) { int result; result = ISA_PNP_PROBE(device_get_parent(dev), dev, atpic_ids); if (result <= 0) device_quiet(dev); return (result); } /* * We might be granted IRQ 2, as this is typically consumed by chaining * between the two PIC components. If we're using the APIC, however, * this may not be the case, and as such we should free the resource. * (XXX untested) * * The generic ISA attachment code will handle allocating any other resources * that we don't explicitly claim here. */ static int atpic_attach(device_t dev) { struct resource *res; int rid; /* Try to allocate our IRQ and then free it. */ rid = 0; res = bus_alloc_resource(dev, SYS_RES_IRQ, &rid, 0, ~0, 1, 0); if (res != NULL) bus_release_resource(dev, SYS_RES_IRQ, rid, res); return (0); } static device_method_t atpic_methods[] = { /* Device interface */ DEVMETHOD(device_probe, atpic_probe), DEVMETHOD(device_attach, atpic_attach), DEVMETHOD(device_detach, bus_generic_detach), DEVMETHOD(device_shutdown, bus_generic_shutdown), DEVMETHOD(device_suspend, bus_generic_suspend), DEVMETHOD(device_resume, bus_generic_resume), { 0, 0 } }; static driver_t atpic_driver = { "atpic", atpic_methods, 1, /* no softc */ }; static devclass_t atpic_devclass; DRIVER_MODULE(atpic, isa, atpic_driver, atpic_devclass, 0, 0); #ifndef PC98 DRIVER_MODULE(atpic, acpi, atpic_driver, atpic_devclass, 0, 0); #endif /* * Return a bitmap of the current interrupt requests. This is 8259-specific * and is only suitable for use at probe time. */ intrmask_t isa_irq_pending(void) { u_char irr1; u_char irr2; irr1 = inb(IO_ICU1); irr2 = inb(IO_ICU2); return ((irr2 << 8) | irr1); } #endif /* DEV_ISA */