/*- * Copyright (c) 1998,1999,2000 Søren Schmidt * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer, * without modification, immediately at the beginning of the file. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. The name of the author may not be used to endorse or promote products * derived from this software without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. * * $FreeBSD: head/sys/dev/ata/ata-all.c 68502 2000-11-08 19:31:39Z sos $ */ #include "ata.h" #include "isa.h" #include "card.h" #include "pci.h" #include "atadisk.h" #include "atapicd.h" #include "atapifd.h" #include "atapist.h" #include "opt_global.h" #include "opt_ata.h" #include #include #include #include #include #include #include #include #include #include #include #include #include #include #if NPCI > 0 #include #include #endif #include #include #ifdef __alpha__ #include #endif #include #include #include /* misc defines */ #define IOMASK 0xfffffffc #define ATA_IOADDR_RID 0 #define ATA_ALTADDR_RID 1 #define ATA_BMADDR_RID 2 #if NPCI > 0 #define ATA_MASTERDEV(dev) ((pci_get_progif(dev) & 0x80) && \ (pci_get_progif(dev) & 0x05) != 0x05) #else #define ATA_MASTERDEV(dev) (1) #endif /* prototypes */ static int ata_probe(device_t); static int ata_attach(device_t); static int ata_detach(device_t); static int ata_resume(device_t); static void ata_boot_attach(void); static void ata_intr(void *); static int ata_getparam(struct ata_softc *, int, u_int8_t); static int ata_service(struct ata_softc *); static char *active2str(int); static void bswap(int8_t *, int); static void btrim(int8_t *, int); static void bpack(int8_t *, int8_t *, int); /* local vars */ static devclass_t ata_devclass; static devclass_t ata_pci_devclass; static struct intr_config_hook *ata_delayed_attach = NULL; static char ata_conf[256]; MALLOC_DEFINE(M_ATA, "ATA generic", "ATA driver generic layer"); #if NISA > 0 static struct isa_pnp_id ata_ids[] = { {0x0006d041, "Generic ESDI/IDE/ATA controller"}, /* PNP0600 */ {0x0106d041, "Plus Hardcard II"}, /* PNP0601 */ {0x0206d041, "Plus Hardcard IIXL/EZ"}, /* PNP0602 */ {0x0306d041, "Generic ATA"}, /* PNP0603 */ {0} }; static int ata_isa_probe(device_t dev) { struct ata_softc *scp = device_get_softc(dev); struct resource *port; int rid; u_long tmp; /* check isapnp ids */ if (ISA_PNP_PROBE(device_get_parent(dev), dev, ata_ids) == ENXIO) return ENXIO; /* allocate the port range */ rid = ATA_IOADDR_RID; port = bus_alloc_resource(dev, SYS_RES_IOPORT, &rid, 0, ~0, ATA_IOSIZE, RF_ACTIVE); if (!port) return ENOMEM; /* alloctate the altport range */ if (bus_get_resource(dev, SYS_RES_IOPORT, 1, &tmp, &tmp)) { bus_set_resource(dev, SYS_RES_IOPORT, 1, rman_get_start(port) + ATA_ALTOFFSET, ATA_ALTIOSIZE); } bus_release_resource(dev, SYS_RES_IOPORT, 0, port); scp->channel = 0; scp->flags |= ATA_USE_16BIT; return ata_probe(dev); } static device_method_t ata_isa_methods[] = { /* device interface */ DEVMETHOD(device_probe, ata_isa_probe), DEVMETHOD(device_attach, ata_attach), DEVMETHOD(device_resume, ata_resume), { 0, 0 } }; static driver_t ata_isa_driver = { "ata", ata_isa_methods, sizeof(struct ata_softc), }; DRIVER_MODULE(ata, isa, ata_isa_driver, ata_devclass, 0, 0); #endif #if NCARD > 0 static int ata_pccard_probe(device_t dev) { struct ata_softc *scp = device_get_softc(dev); struct resource *port; int rid, len; /* allocate the port range */ rid = ATA_IOADDR_RID; len = bus_get_resource_count(dev, SYS_RES_IOPORT, rid); port = bus_alloc_resource(dev, SYS_RES_IOPORT, &rid, 0, ~0, len, RF_ACTIVE); if (!port) return ENOMEM; /* * if we got more than the default ATA_IOSIZE ports, this is likely * a pccard system where the altio ports are located just after the * normal io ports, so no need to allocate them. */ if (len <= ATA_IOSIZE) { bus_set_resource(dev, SYS_RES_IOPORT, ATA_ALTADDR_RID, rman_get_start(port) + ATA_ALTOFFSET, ATA_ALTIOSIZE); } bus_release_resource(dev, SYS_RES_IOPORT, 0, port); scp->channel = 0; scp->flags |= (ATA_USE_16BIT | ATA_NO_SLAVE); return ata_probe(dev); } static device_method_t ata_pccard_methods[] = { /* device interface */ DEVMETHOD(device_probe, ata_pccard_probe), DEVMETHOD(device_attach, ata_attach), DEVMETHOD(device_detach, ata_detach), { 0, 0 } }; static driver_t ata_pccard_driver = { "ata", ata_pccard_methods, sizeof(struct ata_softc), }; DRIVER_MODULE(ata, pccard, ata_pccard_driver, ata_devclass, 0, 0); #endif #if NPCI > 0 struct ata_pci_softc { struct resource *bmio; struct resource bmio_1; struct resource bmio_2; struct resource *irq; int irqcnt; }; int ata_find_dev(device_t dev, u_int32_t type, u_int32_t revid) { device_t *children, child; int nchildren, i; if (device_get_children(device_get_parent(dev), &children, &nchildren)) return 0; for (i = 0; i < nchildren; i++) { child = children[i]; /* check that it's on the same silicon and the device we want */ if (pci_get_slot(dev) == pci_get_slot(child) && pci_get_vendor(child) == (type & 0xffff) && pci_get_device(child) == ((type & 0xffff0000) >> 16) && pci_get_revid(child) >= revid) { free(children, M_TEMP); return 1; } } free(children, M_TEMP); return 0; } static const char * ata_pci_match(device_t dev) { if (pci_get_class(dev) != PCIC_STORAGE) return NULL; switch (pci_get_devid(dev)) { /* supported chipsets */ case 0x12308086: return "Intel PIIX ATA controller"; case 0x70108086: return "Intel PIIX3 ATA controller"; case 0x71118086: case 0x71998086: return "Intel PIIX4 ATA33 controller"; case 0x24218086: return "Intel ICH0 ATA33 controller"; case 0x24118086: return "Intel ICH ATA66 controller"; case 0x244b8086: return "Intel ICH2 ATA100 controller"; case 0x522910b9: return "AcerLabs Aladdin ATA33 controller"; case 0x05711106: if (ata_find_dev(dev, 0x05861106, 0)) return "VIA 82C586 ATA33 controller"; if (ata_find_dev(dev, 0x05961106, 0x12)) return "VIA 82C596 ATA66 controller"; if (ata_find_dev(dev, 0x05961106, 0)) return "VIA 82C596 ATA33 controller"; if (ata_find_dev(dev, 0x06861106, 0)) return "VIA 82C686 ATA66 controller"; return "VIA Apollo ATA controller"; case 0x55131039: return "SiS 5591 ATA33 controller"; case 0x06491095: return "CMD 649 ATA100 controller"; case 0x06481095: return "CMD 648 ATA66 controller"; case 0x06461095: return "CMD 646 ATA controller"; case 0xc6931080: if (pci_get_subclass(dev) == PCIS_STORAGE_IDE) return "Cypress 82C693 ATA controller"; break; case 0x01021078: return "Cyrix 5530 ATA33 controller"; case 0x74091022: return "AMD 756 ATA66 controller"; case 0x02111166: return "ServerWorks ROSB4 ATA33 controller"; case 0x4d33105a: return "Promise ATA33 controller"; case 0x4d38105a: return "Promise ATA66 controller"; case 0x0d30105a: case 0x4d30105a: return "Promise ATA100 controller"; case 0x00041103: switch (pci_get_revid(dev)) { case 0x00: case 0x01: return "HighPoint HPT366 ATA66 controller"; case 0x02: return "HighPoint HPT368 ATA66 controller"; case 0x03: case 0x04: return "HighPoint HPT370 ATA100 controller"; default: return "Unknown revision HighPoint ATA controller"; } /* unsupported but known chipsets, generic DMA only */ case 0x10001042: case 0x10011042: return "RZ 100? ATA controller !WARNING! buggy chip data loss possible"; case 0x06401095: return "CMD 640 ATA controller !WARNING! buggy chip data loss possible"; /* unknown chipsets, try generic DMA if it seems possible */ default: if (pci_get_class(dev) == PCIC_STORAGE && (pci_get_subclass(dev) == PCIS_STORAGE_IDE)) return "Generic PCI ATA controller"; } return NULL; } static int ata_pci_probe(device_t dev) { const char *desc = ata_pci_match(dev); if (desc) { device_set_desc(dev, desc); return 0; } else return ENXIO; } static int ata_pci_add_child(device_t dev, int unit) { device_t child; /* check if this is located at one of the std addresses */ if (ATA_MASTERDEV(dev)) { if (!(child = device_add_child(dev, "ata", unit))) return ENOMEM; } else { if (!(child = device_add_child(dev, "ata", 2))) return ENOMEM; } return 0; } static int ata_pci_attach(device_t dev) { struct ata_pci_softc *sc = device_get_softc(dev); u_int8_t class, subclass; u_int32_t type, cmd; int rid; /* set up vendor-specific stuff */ type = pci_get_devid(dev); class = pci_get_class(dev); subclass = pci_get_subclass(dev); cmd = pci_read_config(dev, PCIR_COMMAND, 4); /* is busmastering supported ? */ if ((cmd & (PCIM_CMD_PORTEN | PCIM_CMD_BUSMASTEREN)) == (PCIM_CMD_PORTEN | PCIM_CMD_BUSMASTEREN)) { /* is there a valid port range to connect to ? */ rid = 0x20; sc->bmio = bus_alloc_resource(dev, SYS_RES_IOPORT, &rid, 0, ~0, 1, RF_ACTIVE); if (!sc->bmio) device_printf(dev, "Busmastering DMA not configured\n"); } else device_printf(dev, "Busmastering DMA not supported\n"); /* do extra chipset specific setups */ switch (type) { case 0x522910b9: /* Aladdin need to activate the ATAPI FIFO */ pci_write_config(dev, 0x53, (pci_read_config(dev, 0x53, 1) & ~0x01) | 0x02, 1); break; case 0x4d38105a: /* Promise 66 & 100 need their clock changed */ case 0x4d30105a: case 0x0d30105a: outb(rman_get_start(sc->bmio) + 0x11, inb(rman_get_start(sc->bmio) + 0x11) | 0x0a); /* FALLTHROUGH */ case 0x4d33105a: /* Promise (all) need burst mode to be turned on */ outb(rman_get_start(sc->bmio) + 0x1f, inb(rman_get_start(sc->bmio) + 0x1f) | 0x01); break; case 0x00041103: /* HighPoint */ switch (pci_get_revid(dev)) { case 0x00: case 0x01: /* turn off interrupt prediction */ pci_write_config(dev, 0x51, (pci_read_config(dev, 0x51, 1) & ~0x80), 1); break; case 0x02: case 0x03: case 0x04: /* turn off interrupt prediction */ pci_write_config(dev, 0x51, (pci_read_config(dev, 0x51, 1) & ~0x02), 1); pci_write_config(dev, 0x55, (pci_read_config(dev, 0x55, 1) & ~0x02), 1); /* turn on interrupts */ pci_write_config(dev, 0x5a, (pci_read_config(dev, 0x5a, 1) & ~0x10), 1); } break; case 0x05711106: case 0x74091022: /* VIA 82C586, 82C596, 82C686 & AMD 756 default setup */ /* set prefetch, postwrite */ pci_write_config(dev, 0x41, pci_read_config(dev, 0x41, 1) | 0xf0, 1); /* set fifo configuration half'n'half */ pci_write_config(dev, 0x43, (pci_read_config(dev, 0x43, 1) & 0x90) | 0x2a, 1); /* set status register read retry */ pci_write_config(dev, 0x44, pci_read_config(dev, 0x44, 1) | 0x08, 1); /* set DMA read & end-of-sector fifo flush */ pci_write_config(dev, 0x46, (pci_read_config(dev, 0x46, 1) & 0x0c) | 0xf0, 1); /* set sector size */ pci_write_config(dev, 0x60, DEV_BSIZE, 2); pci_write_config(dev, 0x68, DEV_BSIZE, 2); /* prepare for ATA-66 on the 82C686 and rev 0x12 and newer 82C596's */ if (ata_find_dev(dev, 0x06861106, 0) || ata_find_dev(dev, 0x05961106, 0x12)) { pci_write_config(dev, 0x50, pci_read_config(dev, 0x50, 4) | 0x070f070f, 4); } break; case 0x10001042: /* RZ 100? known bad, no DMA */ case 0x10011042: case 0x06401095: /* CMD 640 known bad, no DMA */ sc->bmio = 0x0; device_printf(dev, "Busmastering DMA disabled\n"); } /* * the Cypress chip is a mess, it contains two ATA functions, but * both channels are visible on the first one. * simply ignore the second function for now, as the right * solution (ignoring the second channel on the first function) * doesn't work with the crappy ATA interrupt setup on the alpha. */ if (pci_get_devid(dev) == 0xc6931080 && pci_get_function(dev) > 1) return 0; ata_pci_add_child(dev, 0); if (ATA_MASTERDEV(dev) || pci_read_config(dev, 0x18, 4) & IOMASK) ata_pci_add_child(dev, 1); return bus_generic_attach(dev); } static int ata_pci_print_child(device_t dev, device_t child) { struct ata_softc *scp = device_get_softc(child); int retval = 0; retval += bus_print_child_header(dev, child); retval += printf(": at 0x%x", scp->ioaddr); if (ATA_MASTERDEV(dev)) retval += printf(" irq %d", 14 + scp->channel); retval += bus_print_child_footer(dev, child); return retval; } static struct resource * ata_pci_alloc_resource(device_t dev, device_t child, int type, int *rid, u_long start, u_long end, u_long count, u_int flags) { struct ata_pci_softc *sc = device_get_softc(dev); int channel = ((struct ata_softc *)device_get_softc(child))->channel; int myrid; if (type == SYS_RES_IOPORT) { switch (*rid) { case ATA_IOADDR_RID: if (ATA_MASTERDEV(dev)) { myrid = 0; start = (channel == 0 ? IO_WD1 : IO_WD2); end = start + ATA_IOSIZE - 1; count = ATA_IOSIZE; } else myrid = 0x10 + 8 * channel; break; case ATA_ALTADDR_RID: if (ATA_MASTERDEV(dev)) { myrid = 0; start = (channel == 0 ? IO_WD1 : IO_WD2) + ATA_ALTOFFSET; end = start + ATA_ALTIOSIZE - 1; count = ATA_ALTIOSIZE; } else myrid = 0x14 + 8 * channel; break; case ATA_BMADDR_RID: /* the busmaster resource is shared between the two channels */ if (sc->bmio) { if (channel == 0) { sc->bmio_1 = *sc->bmio; sc->bmio_1.r_end = sc->bmio->r_start + ATA_BM_OFFSET1; return &sc->bmio_1; } else { sc->bmio_2 = *sc->bmio; sc->bmio_2.r_start = sc->bmio->r_start + ATA_BM_OFFSET1; sc->bmio_2.r_end = sc->bmio_2.r_start + ATA_BM_OFFSET1; return &sc->bmio_2; } } return 0; default: return 0; } if (ATA_MASTERDEV(dev)) /* make the parent just pass through the allocation. */ return BUS_ALLOC_RESOURCE(device_get_parent(dev), child, SYS_RES_IOPORT, &myrid, start, end, count, flags); else /* we are using the parent resource directly. */ return BUS_ALLOC_RESOURCE(device_get_parent(dev), dev, SYS_RES_IOPORT, &myrid, start, end, count, flags); } if (type == SYS_RES_IRQ) { if (*rid != 0) return 0; if (ATA_MASTERDEV(dev)) { #ifdef __alpha__ return alpha_platform_alloc_ide_intr(channel); #else int irq = (channel == 0 ? 14 : 15); return BUS_ALLOC_RESOURCE(device_get_parent(dev), child, SYS_RES_IRQ, rid, irq, irq, 1, flags & ~RF_SHAREABLE); #endif } else { /* primary and secondary channels share the same interrupt */ sc->irqcnt++; if (!sc->irq) sc->irq = BUS_ALLOC_RESOURCE(device_get_parent(dev), dev, SYS_RES_IRQ, rid, 0, ~0, 1, flags); return sc->irq; } } return 0; } static int ata_pci_release_resource(device_t dev, device_t child, int type, int rid, struct resource *r) { struct ata_pci_softc *sc = device_get_softc(dev); int channel = ((struct ata_softc *)device_get_softc(child))->channel; int myrid = 0; if (type == SYS_RES_IOPORT) { switch (rid) { case ATA_IOADDR_RID: if (ATA_MASTERDEV(dev)) myrid = 0; else myrid = 0x10 + 8 * channel; break; case ATA_ALTADDR_RID: if (ATA_MASTERDEV(dev)) myrid = 0; else myrid = 0x14 + 8 * channel; break; case ATA_BMADDR_RID: return 0; default: return ENOENT; } if (ATA_MASTERDEV(dev)) /* make the parent just pass through the allocation. */ return BUS_RELEASE_RESOURCE(device_get_parent(dev), child, SYS_RES_IOPORT, myrid, r); else /* we are using the parent resource directly. */ return BUS_RELEASE_RESOURCE(device_get_parent(dev), dev, SYS_RES_IOPORT, myrid, r); } if (type == SYS_RES_IRQ) { if (rid != 0) return ENOENT; if (ATA_MASTERDEV(dev)) { #ifdef __alpha__ return alpha_platform_release_ide_intr(channel, r); #else return BUS_RELEASE_RESOURCE(device_get_parent(dev), child, SYS_RES_IRQ, rid, r); #endif } else { if (--sc->irqcnt) return 0; return BUS_RELEASE_RESOURCE(device_get_parent(dev), dev, SYS_RES_IRQ, rid, r); } } return EINVAL; } static int ata_pci_setup_intr(device_t dev, device_t child, struct resource *irq, int flags, driver_intr_t *intr, void *arg, void **cookiep) { if (ATA_MASTERDEV(dev)) { #ifdef __alpha__ return alpha_platform_setup_ide_intr(child, irq, intr, arg, cookiep); #else return BUS_SETUP_INTR(device_get_parent(dev), child, irq, flags, intr, arg, cookiep); #endif } else return BUS_SETUP_INTR(device_get_parent(dev), dev, irq, flags, intr, arg, cookiep); } static int ata_pci_teardown_intr(device_t dev, device_t child, struct resource *irq, void *cookie) { if (ATA_MASTERDEV(dev)) { #ifdef __alpha__ return alpha_platform_teardown_ide_intr(child, irq, cookie); #else return BUS_TEARDOWN_INTR(device_get_parent(dev), child, irq, cookie); #endif } else return BUS_TEARDOWN_INTR(device_get_parent(dev), dev, irq, cookie); } static device_method_t ata_pci_methods[] = { /* device interface */ DEVMETHOD(device_probe, ata_pci_probe), DEVMETHOD(device_attach, ata_pci_attach), DEVMETHOD(device_shutdown, bus_generic_shutdown), DEVMETHOD(device_suspend, bus_generic_suspend), DEVMETHOD(device_resume, bus_generic_resume), /* bus methods */ DEVMETHOD(bus_print_child, ata_pci_print_child), DEVMETHOD(bus_alloc_resource, ata_pci_alloc_resource), DEVMETHOD(bus_release_resource, ata_pci_release_resource), DEVMETHOD(bus_activate_resource, bus_generic_activate_resource), DEVMETHOD(bus_deactivate_resource, bus_generic_deactivate_resource), DEVMETHOD(bus_setup_intr, ata_pci_setup_intr), DEVMETHOD(bus_teardown_intr, ata_pci_teardown_intr), { 0, 0 } }; static driver_t ata_pci_driver = { "atapci", ata_pci_methods, sizeof(struct ata_pci_softc), }; DRIVER_MODULE(atapci, pci, ata_pci_driver, ata_pci_devclass, 0, 0); static int ata_pcisub_probe(device_t dev) { struct ata_softc *scp = device_get_softc(dev); device_t *list; int count, i; /* find channel number on this controller */ device_get_children(device_get_parent(dev), &list, &count); for (i = 0; i < count; i++) { if (list[i] == dev) scp->channel = i; } scp->chiptype = pci_get_devid(device_get_parent(dev)); return ata_probe(dev); } static device_method_t ata_pcisub_methods[] = { /* device interface */ DEVMETHOD(device_probe, ata_pcisub_probe), DEVMETHOD(device_attach, ata_attach), DEVMETHOD(device_detach, ata_detach), DEVMETHOD(device_resume, ata_resume), { 0, 0 } }; static driver_t ata_pcisub_driver = { "ata", ata_pcisub_methods, sizeof(struct ata_softc), }; DRIVER_MODULE(ata, atapci, ata_pcisub_driver, ata_devclass, 0, 0); #endif static int ata_testregs(struct ata_softc *scp) { outb(scp->ioaddr + ATA_ERROR, 0x58); outb(scp->ioaddr + ATA_CYL_LSB, 0xa5); return (inb(scp->ioaddr + ATA_ERROR) != 0x58 && inb(scp->ioaddr + ATA_CYL_LSB) == 0xa5); } static int ata_probe(device_t dev) { struct ata_softc *scp = device_get_softc(dev); struct resource *io = 0; struct resource *altio = 0; struct resource *bmio = 0; int rid; u_int32_t ioaddr, altioaddr, bmaddr; int mask = 0; u_int8_t status0, status1; if (!scp || scp->flags & ATA_ATTACHED) return ENXIO; /* initialize the softc basics */ scp->active = ATA_IDLE; scp->dev = dev; scp->devices = 0; rid = ATA_IOADDR_RID; io = bus_alloc_resource(dev, SYS_RES_IOPORT, &rid, 0, ~0, ATA_IOSIZE, RF_ACTIVE); if (!io) goto failure; ioaddr = rman_get_start(io); rid = ATA_ALTADDR_RID; altio = bus_alloc_resource(dev, SYS_RES_IOPORT, &rid, 0, ~0, ATA_ALTIOSIZE, RF_ACTIVE); if (altio) { if (scp->flags & ATA_USE_16BIT || ATA_MASTERDEV(device_get_parent(dev))) altioaddr = rman_get_start(altio); else altioaddr = rman_get_start(altio) + 0x02; } else altioaddr = ioaddr + ATA_PCCARD_ALTOFFSET; rid = ATA_BMADDR_RID; bmio = bus_alloc_resource(dev, SYS_RES_IOPORT, &rid, 0, ~0, 1, RF_ACTIVE); bmaddr = bmio ? rman_get_start(bmio) : 0; /* store the IO resources for eventual later release */ scp->r_io = io; scp->r_altio = altio; scp->r_bmio = bmio; /* store the physical IO addresse for easy access */ scp->ioaddr = ioaddr; scp->altioaddr = altioaddr; scp->bmaddr = bmaddr; if (bootverbose) ata_printf(scp, -1, "iobase=0x%04x altiobase=0x%04x bmaddr=0x%04x\n", scp->ioaddr, scp->altioaddr, scp->bmaddr); /* do we have any signs of ATA/ATAPI HW being present ? */ outb(scp->ioaddr + ATA_DRIVE, ATA_D_IBM | ATA_MASTER); DELAY(1); status0 = inb(scp->ioaddr + ATA_STATUS); if ((status0 & 0xf8) != 0xf8 && status0 != 0xa5 && ata_testregs(scp)) mask |= 0x01; outb(scp->ioaddr + ATA_DRIVE, ATA_D_IBM | ATA_SLAVE); DELAY(1); status1 = inb(scp->ioaddr + ATA_STATUS); if ((status1 & 0xf8) != 0xf8 && status1 != 0xa5 && ata_testregs(scp)) mask |= 0x02; if (bootverbose) ata_printf(scp, -1, "mask=%02x status0=%02x status1=%02x\n", mask, status0, status1); if (!mask) goto failure; ata_reset(scp, &mask); if (bootverbose) ata_printf(scp, -1, "devices = 0x%x\n", scp->devices); if (!mask) goto failure; TAILQ_INIT(&scp->ata_queue); TAILQ_INIT(&scp->atapi_queue); return 0; failure: if (io) bus_release_resource(dev, SYS_RES_IOPORT, ATA_IOADDR_RID, io); if (altio) bus_release_resource(dev, SYS_RES_IOPORT, ATA_ALTADDR_RID, altio); if (bmio) bus_release_resource(dev, SYS_RES_IOPORT, ATA_BMADDR_RID, bmio); if (bootverbose) ata_printf(scp, -1, "probe allocation failed\n"); return ENXIO; } static int ata_attach(device_t dev) { struct ata_softc *scp = device_get_softc(dev); int error, rid = 0; if (!scp || scp->flags & ATA_ATTACHED) return ENXIO; scp->r_irq = bus_alloc_resource(dev, SYS_RES_IRQ, &rid, 0, ~0, 1, RF_SHAREABLE | RF_ACTIVE); if (!scp->r_irq) { ata_printf(scp, -1, "unable to allocate interrupt\n"); return ENXIO; } if ((error = bus_setup_intr(dev, scp->r_irq, INTR_TYPE_BIO, ata_intr, scp, &scp->ih))) return error; /* * do not attach devices if we are in early boot, this is done later * when interrupts are enabled by a hook into the boot process. * otherwise attach what the probe has found in scp->devices. */ if (!ata_delayed_attach) { if (scp->devices & ATA_ATA_SLAVE) if (ata_getparam(scp, ATA_SLAVE, ATA_C_ATA_IDENTIFY)) scp->devices &= ~ATA_ATA_SLAVE; if (scp->devices & ATA_ATAPI_SLAVE) if (ata_getparam(scp, ATA_SLAVE, ATA_C_ATAPI_IDENTIFY)) scp->devices &= ~ATA_ATAPI_SLAVE; if (scp->devices & ATA_ATA_MASTER) if (ata_getparam(scp, ATA_MASTER, ATA_C_ATA_IDENTIFY)) scp->devices &= ~ATA_ATA_MASTER; if (scp->devices & ATA_ATAPI_MASTER) if (ata_getparam(scp, ATA_MASTER,ATA_C_ATAPI_IDENTIFY)) scp->devices &= ~ATA_ATAPI_MASTER; #if NATADISK > 0 if (scp->devices & ATA_ATA_MASTER) ad_attach(scp, ATA_MASTER); if (scp->devices & ATA_ATA_SLAVE) ad_attach(scp, ATA_SLAVE); #endif #if NATAPICD > 0 || NATAPIFD > 0 || NATAPIST > 0 if (scp->devices & ATA_ATAPI_MASTER) atapi_attach(scp, ATA_MASTER); if (scp->devices & ATA_ATAPI_SLAVE) atapi_attach(scp, ATA_SLAVE); #endif } scp->flags |= ATA_ATTACHED; return 0; } static int ata_detach(device_t dev) { struct ata_softc *scp = device_get_softc(dev); if (!scp || !(scp->flags & ATA_ATTACHED)) return ENXIO; #if NATADISK > 0 if (scp->devices & ATA_ATA_MASTER) ad_detach(scp->dev_softc[0]); if (scp->devices & ATA_ATA_SLAVE) ad_detach(scp->dev_softc[1]); #endif #if NATAPICD > 0 || NATAPIFD > 0 || NATAPIST > 0 if (scp->devices & ATA_ATAPI_MASTER) atapi_detach(scp->dev_softc[0]); if (scp->devices & ATA_ATAPI_SLAVE) atapi_detach(scp->dev_softc[1]); #endif if (scp->dev_param[ATA_DEV(ATA_MASTER)]) { free(scp->dev_param[ATA_DEV(ATA_MASTER)], M_ATA); scp->dev_param[ATA_DEV(ATA_MASTER)] = NULL; } if (scp->dev_param[ATA_DEV(ATA_SLAVE)]) { free(scp->dev_param[ATA_DEV(ATA_SLAVE)], M_ATA); scp->dev_param[ATA_DEV(ATA_SLAVE)] = NULL; } scp->dev_softc[ATA_DEV(ATA_MASTER)] = NULL; scp->dev_softc[ATA_DEV(ATA_SLAVE)] = NULL; scp->mode[ATA_DEV(ATA_MASTER)] = ATA_PIO; scp->mode[ATA_DEV(ATA_SLAVE)] = ATA_PIO; bus_teardown_intr(dev, scp->r_irq, scp->ih); bus_release_resource(dev, SYS_RES_IRQ, 0, scp->r_irq); if (scp->r_bmio) bus_release_resource(dev, SYS_RES_IOPORT, ATA_BMADDR_RID, scp->r_bmio); if (scp->r_altio) bus_release_resource(dev, SYS_RES_IOPORT, ATA_ALTADDR_RID,scp->r_altio); bus_release_resource(dev, SYS_RES_IOPORT, ATA_IOADDR_RID, scp->r_io); scp->flags &= ~ATA_ATTACHED; return 0; } static int ata_resume(device_t dev) { struct ata_softc *scp = device_get_softc(dev); ata_reinit(scp); return 0; } static int ata_getparam(struct ata_softc *scp, int device, u_int8_t command) { struct ata_params *ata_parm; int8_t buffer[DEV_BSIZE]; int retry = 0; /* select drive */ outb(scp->ioaddr + ATA_DRIVE, ATA_D_IBM | device); DELAY(1); /* enable interrupt */ outb(scp->altioaddr, ATA_A_4BIT); DELAY(1); /* apparently some devices needs this repeated */ do { if (ata_command(scp, device, command, 0, 0, 0, 0, 0, ATA_WAIT_INTR)) { ata_printf(scp, device, "identify failed\n"); return -1; } if (retry++ > 4) { ata_printf(scp, device, "identify retries exceeded\n"); return -1; } } while (ata_wait(scp, device, ((command == ATA_C_ATAPI_IDENTIFY) ? ATA_S_DRQ : (ATA_S_READY | ATA_S_DSC | ATA_S_DRQ)))); insw(scp->ioaddr + ATA_DATA, buffer, sizeof(buffer)/sizeof(int16_t)); ata_parm = malloc(sizeof(struct ata_params), M_ATA, M_NOWAIT); if (!ata_parm) { ata_printf(scp, device, "malloc for identify data failed\n"); return -1; } bcopy(buffer, ata_parm, sizeof(struct ata_params)); if (command == ATA_C_ATA_IDENTIFY || !((ata_parm->model[0] == 'N' && ata_parm->model[1] == 'E') || (ata_parm->model[0] == 'F' && ata_parm->model[1] == 'X'))) bswap(ata_parm->model, sizeof(ata_parm->model)); btrim(ata_parm->model, sizeof(ata_parm->model)); bpack(ata_parm->model, ata_parm->model, sizeof(ata_parm->model)); bswap(ata_parm->revision, sizeof(ata_parm->revision)); btrim(ata_parm->revision, sizeof(ata_parm->revision)); bpack(ata_parm->revision, ata_parm->revision, sizeof(ata_parm->revision)); scp->dev_param[ATA_DEV(device)] = ata_parm; return 0; } static void ata_boot_attach(void) { struct ata_softc *scp; int ctlr; /* * run through all ata devices and look for real ATA & ATAPI devices * using the hints we found in the early probe, this avoids some of * the delays probing of non-exsistent devices can cause. */ for (ctlr=0; ctlrdevices & ATA_ATA_SLAVE) if (ata_getparam(scp, ATA_SLAVE, ATA_C_ATA_IDENTIFY)) scp->devices &= ~ATA_ATA_SLAVE; if (scp->devices & ATA_ATAPI_SLAVE) if (ata_getparam(scp, ATA_SLAVE, ATA_C_ATAPI_IDENTIFY)) scp->devices &= ~ATA_ATAPI_SLAVE; if (scp->devices & ATA_ATA_MASTER) if (ata_getparam(scp, ATA_MASTER, ATA_C_ATA_IDENTIFY)) scp->devices &= ~ATA_ATA_MASTER; if (scp->devices & ATA_ATAPI_MASTER) if (ata_getparam(scp, ATA_MASTER,ATA_C_ATAPI_IDENTIFY)) scp->devices &= ~ATA_ATAPI_MASTER; } #if NATADISK > 0 /* now we know whats there, do the real attach, first the ATA disks */ for (ctlr=0; ctlrdevices & ATA_ATA_MASTER) ad_attach(scp, ATA_MASTER); if (scp->devices & ATA_ATA_SLAVE) ad_attach(scp, ATA_SLAVE); } #endif #if NATAPICD > 0 || NATAPIFD > 0 || NATAPIST > 0 /* then the atapi devices */ for (ctlr=0; ctlrdevices & ATA_ATAPI_MASTER) atapi_attach(scp, ATA_MASTER); if (scp->devices & ATA_ATAPI_SLAVE) atapi_attach(scp, ATA_SLAVE); } #endif if (ata_delayed_attach) { config_intrhook_disestablish(ata_delayed_attach); free(ata_delayed_attach, M_ATA); ata_delayed_attach = NULL; } } static void ata_intr(void *data) { struct ata_softc *scp = (struct ata_softc *)data; struct ata_pci_softc *sc = device_get_softc(device_get_parent(scp->dev)); u_int8_t dmastat = 0; /* * since we might share the IRQ with another device, and in some * cases with our twin channel, we only want to process interrupts * that we know this channel generated. */ switch (scp->chiptype) { #if NPCI > 0 case 0x00041103: /* HighPoint HPT366/368/370 */ if (((dmastat = ata_dmastatus(scp)) & (ATA_BMSTAT_ACTIVE | ATA_BMSTAT_INTERRUPT)) != ATA_BMSTAT_INTERRUPT) return; outb(scp->bmaddr + ATA_BMSTAT_PORT, dmastat | ATA_BMSTAT_INTERRUPT); break; case 0x06481095: /* CMD 648 */ case 0x06491095: /* CMD 649 */ if (!(pci_read_config(device_get_parent(scp->dev), 0x71, 1) & (scp->channel ? 0x08 : 0x04))) return; goto out; case 0x4d33105a: /* Promise Ultra/Fasttrak 33 */ case 0x4d38105a: /* Promise Ultra/Fasttrak 66 */ case 0x4d30105a: /* Promise Ultra/Fasttrak 100 */ case 0x0d30105a: /* Promise OEM ATA100 */ if (!(inl(rman_get_start(sc->bmio) + 0x1c) & (scp->channel ? 0x00004000 : 0x00000400))) return; /* FALLTHROUGH */ out: #endif default: if (scp->flags & ATA_DMA_ACTIVE) { if (!((dmastat = ata_dmastatus(scp)) & ATA_BMSTAT_INTERRUPT)) return; outb(scp->bmaddr + ATA_BMSTAT_PORT, dmastat | ATA_BMSTAT_INTERRUPT); } } DELAY(1); /* if drive is busy it didn't interrupt */ if (inb(scp->altioaddr) & ATA_S_BUSY) return; /* clear interrupt and get status */ scp->status = inb(scp->ioaddr + ATA_STATUS); if (scp->status & ATA_S_ERROR) scp->error = inb(scp->ioaddr + ATA_ERROR); /* find & call the responsible driver to process this interrupt */ switch (scp->active) { #if NATADISK > 0 case ATA_ACTIVE_ATA: if (!scp->running || ad_interrupt(scp->running) == ATA_OP_CONTINUES) return; break; #endif #if NATAPICD > 0 || NATAPIFD > 0 || NATAPIST > 0 case ATA_ACTIVE_ATAPI: if (!scp->running || atapi_interrupt(scp->running) == ATA_OP_CONTINUES) return; break; #endif case ATA_WAIT_INTR: wakeup((caddr_t)scp); break; case ATA_WAIT_READY: break; case ATA_REINITING: return; case ATA_IDLE: if (scp->flags & ATA_QUEUED) { scp->active = ATA_ACTIVE; if (ata_service(scp) == ATA_OP_CONTINUES) return; } /* FALLTHROUGH */ default: #ifdef ATA_DEBUG { static int intr_count = 0; if (intr_count++ < 10) ata_printf(scp, -1, "unwanted interrupt %d status = %02x\n", intr_count, scp->status); } #endif } scp->active = ATA_IDLE; scp->running = NULL; ata_start(scp); return; } void ata_start(struct ata_softc *scp) { #if NATADISK > 0 struct ad_request *ad_request; #endif #if NATAPICD > 0 || NATAPIFD > 0 || NATAPIST > 0 struct atapi_request *atapi_request; #endif if (scp->active != ATA_IDLE) return; scp->active = ATA_ACTIVE; #if NATADISK > 0 /* find & call the responsible driver if anything on the ATA queue */ if (TAILQ_EMPTY(&scp->ata_queue)) { if (scp->devices & (ATA_ATA_MASTER) && scp->dev_softc[0]) ad_start((struct ad_softc *)scp->dev_softc[0]); if (scp->devices & (ATA_ATA_SLAVE) && scp->dev_softc[1]) ad_start((struct ad_softc *)scp->dev_softc[1]); } if ((ad_request = TAILQ_FIRST(&scp->ata_queue))) { TAILQ_REMOVE(&scp->ata_queue, ad_request, chain); scp->active = ATA_ACTIVE_ATA; scp->running = ad_request; if (ad_transfer(ad_request) == ATA_OP_CONTINUES) return; } #endif #if NATAPICD > 0 || NATAPIFD > 0 || NATAPIST > 0 /* find & call the responsible driver if anything on the ATAPI queue */ if (TAILQ_EMPTY(&scp->atapi_queue)) { if (scp->devices & (ATA_ATAPI_MASTER) && scp->dev_softc[0]) atapi_start((struct atapi_softc *)scp->dev_softc[0]); if (scp->devices & (ATA_ATAPI_SLAVE) && scp->dev_softc[1]) atapi_start((struct atapi_softc *)scp->dev_softc[1]); } if ((atapi_request = TAILQ_FIRST(&scp->atapi_queue))) { TAILQ_REMOVE(&scp->atapi_queue, atapi_request, chain); scp->active = ATA_ACTIVE_ATAPI; scp->running = atapi_request; atapi_transfer(atapi_request); return; } #endif scp->active = ATA_IDLE; } void ata_reset(struct ata_softc *scp, int *mask) { int timeout; u_int8_t status0 = ATA_S_BUSY, status1 = ATA_S_BUSY; /* reset channel */ outb(scp->ioaddr + ATA_DRIVE, ATA_D_IBM | ATA_MASTER); DELAY(1); inb(scp->ioaddr + ATA_STATUS); outb(scp->altioaddr, ATA_A_IDS | ATA_A_RESET); DELAY(100000); outb(scp->altioaddr, ATA_A_IDS); DELAY(10000); inb(scp->ioaddr + ATA_ERROR); DELAY(3000); scp->devices = 0; /* in some setups we dont want to test for a slave */ if (scp->flags & ATA_NO_SLAVE) *mask &= ~0x02; /* wait for BUSY to go inactive */ for (timeout = 0; timeout < 310000; timeout++) { if (status0 & ATA_S_BUSY) { outb(scp->ioaddr + ATA_DRIVE, ATA_D_IBM | ATA_MASTER); DELAY(1); status0 = inb(scp->ioaddr + ATA_STATUS); if (!(status0 & ATA_S_BUSY)) { /* check for ATAPI signature while its still there */ if (inb(scp->ioaddr + ATA_CYL_LSB) == ATAPI_MAGIC_LSB && inb(scp->ioaddr + ATA_CYL_MSB) == ATAPI_MAGIC_MSB) scp->devices |= ATA_ATAPI_MASTER; } } if (status1 & ATA_S_BUSY) { outb(scp->ioaddr + ATA_DRIVE, ATA_D_IBM | ATA_SLAVE); DELAY(1); status1 = inb(scp->ioaddr + ATA_STATUS); if (!(status1 & ATA_S_BUSY)) { /* check for ATAPI signature while its still there */ if (inb(scp->ioaddr + ATA_CYL_LSB) == ATAPI_MAGIC_LSB && inb(scp->ioaddr + ATA_CYL_MSB) == ATAPI_MAGIC_MSB) scp->devices |= ATA_ATAPI_SLAVE; } } if (*mask == 0x01) /* wait for master only */ if (!(status0 & ATA_S_BUSY)) break; if (*mask == 0x02) /* wait for slave only */ if (!(status1 & ATA_S_BUSY)) break; if (*mask == 0x03) /* wait for both master & slave */ if (!(status0 & ATA_S_BUSY) && !(status1 & ATA_S_BUSY)) break; DELAY(100); } DELAY(1); outb(scp->altioaddr, ATA_A_4BIT); if (status0 & ATA_S_BUSY) *mask &= ~0x01; if (status1 & ATA_S_BUSY) *mask &= ~0x02; if (bootverbose) ata_printf(scp, -1, "mask=%02x status0=%02x status1=%02x\n", *mask, status0, status1); if (!mask) return; if (status0 != 0x00 && !(scp->devices & ATA_ATAPI_MASTER)) { outb(scp->ioaddr + ATA_DRIVE, (ATA_D_IBM | ATA_MASTER)); DELAY(1); if (ata_testregs(scp)) scp->devices |= ATA_ATA_MASTER; } if (status1 != 0x00 && !(scp->devices & ATA_ATAPI_SLAVE)) { outb(scp->ioaddr + ATA_DRIVE, (ATA_D_IBM | ATA_SLAVE)); DELAY(1); if (ata_testregs(scp)) scp->devices |= ATA_ATA_SLAVE; } } int ata_reinit(struct ata_softc *scp) { int mask = 0, omask; scp->active = ATA_REINITING; scp->running = NULL; if (scp->devices & (ATA_ATA_MASTER | ATA_ATAPI_MASTER)) mask |= 0x01; if (scp->devices & (ATA_ATA_SLAVE | ATA_ATAPI_SLAVE)) mask |= 0x02; if (mask) { omask = mask; ata_printf(scp, -1, "resetting devices .. "); ata_reset(scp, &mask); if (omask != mask) printf(" device dissapeared! %d ", omask & ~mask); #if NATADISK > 0 if (scp->devices & (ATA_ATA_MASTER) && scp->dev_softc[0]) ad_reinit((struct ad_softc *)scp->dev_softc[0]); if (scp->devices & (ATA_ATA_SLAVE) && scp->dev_softc[1]) ad_reinit((struct ad_softc *)scp->dev_softc[1]); #endif #if NATAPICD > 0 || NATAPIFD > 0 || NATAPIST > 0 if (scp->devices & (ATA_ATAPI_MASTER) && scp->dev_softc[0]) atapi_reinit((struct atapi_softc *)scp->dev_softc[0]); if (scp->devices & (ATA_ATAPI_SLAVE) && scp->dev_softc[1]) atapi_reinit((struct atapi_softc *)scp->dev_softc[1]); #endif printf("done\n"); } scp->active = ATA_IDLE; ata_start(scp); return 0; } static int ata_service(struct ata_softc *scp) { /* do we have a SERVICE request from the drive ? */ if ((scp->status & (ATA_S_SERVICE|ATA_S_ERROR|ATA_S_DRQ)) == ATA_S_SERVICE){ outb(scp->bmaddr + ATA_BMSTAT_PORT, ata_dmastatus(scp) | ATA_BMSTAT_INTERRUPT); #if NATADISK > 0 if ((inb(scp->ioaddr + ATA_DRIVE) & ATA_SLAVE) == ATA_MASTER) { if ((scp->devices & ATA_ATA_MASTER) && scp->dev_softc[0]) return ad_service((struct ad_softc *)scp->dev_softc[0], 0); } else { if ((scp->devices & ATA_ATA_SLAVE) && scp->dev_softc[1]) return ad_service((struct ad_softc *)scp->dev_softc[1], 0); } #endif } return ATA_OP_FINISHED; } int ata_wait(struct ata_softc *scp, int device, u_int8_t mask) { int timeout = 0; int statio = scp->ioaddr + ATA_STATUS; DELAY(1); while (timeout < 5000000) { /* timeout 5 secs */ scp->status = inb(statio); /* if drive fails status, reselect the drive just to be sure */ if (scp->status == 0xff) { ata_printf(scp, device, "no status, reselecting device\n"); outb(scp->ioaddr + ATA_DRIVE, ATA_D_IBM | device); DELAY(1); scp->status = inb(statio); } /* are we done ? */ if (!(scp->status & ATA_S_BUSY)) break; if (timeout > 1000) { timeout += 1000; DELAY(1000); } else { timeout += 10; DELAY(10); } } if (scp->status & ATA_S_ERROR) scp->error = inb(scp->ioaddr + ATA_ERROR); if (timeout >= 5000000) return -1; if (!mask) return (scp->status & ATA_S_ERROR); /* Wait 50 msec for bits wanted. */ timeout = 5000; while (timeout--) { scp->status = inb(statio); if ((scp->status & mask) == mask) { if (scp->status & ATA_S_ERROR) scp->error = inb(scp->ioaddr + ATA_ERROR); return (scp->status & ATA_S_ERROR); } DELAY (10); } return -1; } int ata_command(struct ata_softc *scp, int device, u_int8_t command, u_int16_t cylinder, u_int8_t head, u_int8_t sector, u_int8_t count, u_int8_t feature, int flags) { int error = 0; #ifdef ATA_DEBUG ata_printf(scp, device, "ata_command: addr=%04x, cmd=%02x, " "c=%d, h=%d, s=%d, count=%d, feature=%d, flags=%02x\n", scp->ioaddr, command, cylinder, head, sector, count, feature, flags); #endif /* disable interrupt from device */ if (scp->flags & ATA_QUEUED) outb(scp->altioaddr, ATA_A_IDS | ATA_A_4BIT); /* select device */ outb(scp->ioaddr + ATA_DRIVE, ATA_D_IBM | device); /* ready to issue command ? */ if (ata_wait(scp, device, 0) < 0) { ata_printf(scp, device, "timeout waiting to give command=%02x s=%02x e=%02x\n", command, scp->status, scp->error); return -1; } outb(scp->ioaddr + ATA_FEATURE, feature); outb(scp->ioaddr + ATA_COUNT, count); outb(scp->ioaddr + ATA_SECTOR, sector); outb(scp->ioaddr + ATA_CYL_MSB, cylinder >> 8); outb(scp->ioaddr + ATA_CYL_LSB, cylinder); outb(scp->ioaddr + ATA_DRIVE, ATA_D_IBM | device | head); switch (flags) { case ATA_WAIT_INTR: scp->active = ATA_WAIT_INTR; asleep((caddr_t)scp, PRIBIO, "atacmd", 10 * hz); outb(scp->ioaddr + ATA_CMD, command); /* enable interrupt */ if (scp->flags & ATA_QUEUED) outb(scp->altioaddr, ATA_A_4BIT); if (await(PRIBIO, 10 * hz)) { ata_printf(scp, device, "ata_command: timeout waiting for intr\n"); scp->active = ATA_IDLE; error = -1; } break; case ATA_WAIT_READY: if (scp->active != ATA_REINITING) scp->active = ATA_WAIT_READY; outb(scp->ioaddr + ATA_CMD, command); if (ata_wait(scp, device, ATA_S_READY) < 0) { ata_printf(scp, device, "timeout waiting for command=%02x s=%02x e=%02x\n", command, scp->status, scp->error); error = -1; } if (scp->active != ATA_REINITING) scp->active = ATA_IDLE; break; case ATA_IMMEDIATE: outb(scp->ioaddr + ATA_CMD, command); break; default: ata_printf(scp, device, "DANGER: illegal interrupt flag=%s\n", active2str(flags)); } /* enable interrupt */ if (scp->flags & ATA_QUEUED) outb(scp->altioaddr, ATA_A_4BIT); return error; } int ata_get_lun(u_int32_t *map) { int lun = ffs(~*map) - 1; *map |= (1 << lun); return lun; } void ata_free_lun(u_int32_t *map, int lun) { *map &= ~(1 << lun); } int ata_printf(struct ata_softc *scp, int device, const char * fmt, ...) { va_list ap; int ret; if (device == -1) ret = printf("ata%d: ", device_get_unit(scp->dev)); else ret = printf("ata%d-%s: ", device_get_unit(scp->dev), (device == ATA_MASTER) ? "master" : "slave"); va_start(ap, fmt); ret += vprintf(fmt, ap); va_end(ap); return ret; } char * ata_mode2str(int mode) { switch (mode) { case ATA_PIO: return "BIOSPIO"; case ATA_PIO0: return "PIO0"; case ATA_PIO1: return "PIO1"; case ATA_PIO2: return "PIO2"; case ATA_PIO3: return "PIO3"; case ATA_PIO4: return "PIO4"; case ATA_WDMA2: return "WDMA2"; case ATA_UDMA2: return "UDMA33"; case ATA_UDMA4: return "UDMA66"; case ATA_UDMA5: return "UDMA100"; case ATA_DMA: return "BIOSDMA"; default: return "???"; } } int ata_pio2mode(int pio) { switch (pio) { default: case 0: return ATA_PIO0; case 1: return ATA_PIO1; case 2: return ATA_PIO2; case 3: return ATA_PIO3; case 4: return ATA_PIO4; } } int ata_pmode(struct ata_params *ap) { if (ap->atavalid & ATA_FLAG_64_70) { if (ap->apiomodes & 2) return 4; if (ap->apiomodes & 1) return 3; } if (ap->opiomode == 2) return 2; if (ap->opiomode == 1) return 1; if (ap->opiomode == 0) return 0; return -1; } int ata_wmode(struct ata_params *ap) { if (ap->wdmamodes & 4) return 2; if (ap->wdmamodes & 2) return 1; if (ap->wdmamodes & 1) return 0; return -1; } int ata_umode(struct ata_params *ap) { if (ap->atavalid & ATA_FLAG_88) { if (ap->udmamodes & 0x20) return 5; if (ap->udmamodes & 0x10) return 4; if (ap->udmamodes & 0x08) return 3; if (ap->udmamodes & 0x04) return 2; if (ap->udmamodes & 0x02) return 1; if (ap->udmamodes & 0x01) return 0; } return -1; } static char * active2str(int active) { static char buf[8]; switch (active) { case ATA_IDLE: return("ATA_IDLE"); case ATA_IMMEDIATE: return("ATA_IMMEDIATE"); case ATA_WAIT_INTR: return("ATA_WAIT_INTR"); case ATA_WAIT_READY: return("ATA_WAIT_READY"); case ATA_ACTIVE: return("ATA_ACTIVE"); case ATA_ACTIVE_ATA: return("ATA_ACTIVE_ATA"); case ATA_ACTIVE_ATAPI: return("ATA_ACTIVE_ATAPI"); case ATA_REINITING: return("ATA_REINITING"); default: sprintf(buf, "0x%02x", active); return buf; } } static void bswap(int8_t *buf, int len) { u_int16_t *ptr = (u_int16_t*)(buf + len); while (--ptr >= (u_int16_t*)buf) *ptr = ntohs(*ptr); } static void btrim(int8_t *buf, int len) { int8_t *ptr; for (ptr = buf; ptr < buf+len; ++ptr) if (!*ptr) *ptr = ' '; for (ptr = buf + len - 1; ptr >= buf && *ptr == ' '; --ptr) *ptr = 0; } static void bpack(int8_t *src, int8_t *dst, int len) { int i, j, blank; for (i = j = blank = 0 ; i < len; i++) { if (blank && src[i] == ' ') continue; if (blank && src[i] != ' ') { dst[j++] = src[i]; blank = 0; continue; } if (src[i] == ' ') { blank = 1; if (i == 0) continue; } dst[j++] = src[i]; } if (j < len) dst[j] = 0x00; } static void ata_change_mode(struct ata_softc *scp, int device, int mode) { int s = splbio(); while (scp->active != ATA_IDLE) tsleep((caddr_t)&s, PRIBIO, "atachm", hz/4); scp->active = ATA_REINITING; ata_dmainit(scp, device, ata_pmode(ATA_PARAM(scp, device)), mode < ATA_DMA ? -1 : ata_wmode(ATA_PARAM(scp, device)), mode < ATA_DMA ? -1 : ata_umode(ATA_PARAM(scp, device))); scp->active = ATA_IDLE; ata_start(scp); splx(s); } static int sysctl_hw_ata(SYSCTL_HANDLER_ARGS) { struct ata_softc *scp; int ctlr, error, i; /* readout internal state */ bzero(ata_conf, sizeof(ata_conf)); for (ctlr=0; ctlrdev_softc[i]) strcat(ata_conf, "---,"); else if (scp->mode[i] >= ATA_DMA) strcat(ata_conf, "dma,"); else strcat(ata_conf, "pio,"); } } error = sysctl_handle_string(oidp, ata_conf, sizeof(ata_conf), req); if (error == 0 && req->newptr != NULL) { char *ptr = ata_conf; /* update internal state */ i = 0; while (*ptr) { if (!strncmp(ptr, "pio", 3) || !strncmp(ptr, "PIO", 3)) { if ((scp = devclass_get_softc(ata_devclass, i >> 1)) && scp->dev_softc[i & 1] && scp->mode[i & 1] >= ATA_DMA) ata_change_mode(scp, (i & 1)?ATA_SLAVE:ATA_MASTER, ATA_PIO); } else if (!strncmp(ptr, "dma", 3) || !strncmp(ptr, "DMA", 3)) { if ((scp = devclass_get_softc(ata_devclass, i >> 1)) && scp->dev_softc[i & 1] && scp->mode[i & 1] < ATA_DMA) ata_change_mode(scp, (i & 1)?ATA_SLAVE:ATA_MASTER, ATA_DMA); } else if (strncmp(ptr, "---", 3)) break; ptr+=3; if (*ptr++ != ',' || ++i > (devclass_get_maxunit(ata_devclass) << 1)) break; } } return error; } SYSCTL_PROC(_hw, OID_AUTO, atamodes, CTLTYPE_STRING | CTLFLAG_RW, 0, sizeof(ata_conf), sysctl_hw_ata, "A", ""); static void ata_init(void) { /* register boot attach to be run when interrupts are enabled */ if (!(ata_delayed_attach = (struct intr_config_hook *) malloc(sizeof(struct intr_config_hook), M_TEMP, M_NOWAIT))) { printf("ata: malloc of delayed attach hook failed\n"); return; } bzero(ata_delayed_attach, sizeof(struct intr_config_hook)); ata_delayed_attach->ich_func = (void*)ata_boot_attach; if (config_intrhook_establish(ata_delayed_attach) != 0) { printf("ata: config_intrhook_establish failed\n"); free(ata_delayed_attach, M_TEMP); } } SYSINIT(atadev, SI_SUB_DRIVERS, SI_ORDER_SECOND, ata_init, NULL)