/* * Copyright (c) 1998 Michael Smith (msmith@freebsd.org) * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. * * $FreeBSD: head/sys/boot/pc98/libpc98/comconsole.c 50477 1999-08-28 01:08:13Z peter $ */ #include #include #include #include "libi386.h" /* selected defines from ns16550.h */ #define com_data 0 /* data register (R/W) */ #define com_dlbl 0 /* divisor latch low (W) */ #define com_dlbh 1 /* divisor latch high (W) */ #define com_ier 1 /* interrupt enable (W) */ #define com_iir 2 /* interrupt identification (R) */ #define com_fifo 2 /* FIFO control (W) */ #define com_lctl 3 /* line control register (R/W) */ #define com_cfcr 3 /* line control register (R/W) */ #define com_mcr 4 /* modem control register (R/W) */ #define com_lsr 5 /* line status register (R/W) */ #define com_msr 6 /* modem status register (R/W) */ /* selected defines from sioreg.h */ #define CFCR_DLAB 0x80 #define MCR_RTS 0x02 #define MCR_DTR 0x01 #define LSR_TXRDY 0x20 #define LSR_RXRDY 0x01 #define COMC_FMT 0x3 /* 8N1 */ #define COMC_TXWAIT 0x40000 /* transmit timeout */ #define COMC_BPS(x) (115200 / (x)) /* speed to DLAB divisor */ #ifndef COMPORT #ifdef PC98 #define COMPORT 0x238 #else #define COMPORT 0x3f8 #endif #endif #ifndef COMSPEED #define COMSPEED 9600 #endif static void comc_probe(struct console *cp); static int comc_init(int arg); static void comc_putchar(int c); static int comc_getchar(void); static int comc_ischar(void); static int comc_started; struct console comconsole = { "comconsole", "serial port", 0, comc_probe, comc_init, comc_putchar, comc_getchar, comc_ischar }; static void comc_probe(struct console *cp) { /* XXX check the BIOS equipment list? */ cp->c_flags |= (C_PRESENTIN | C_PRESENTOUT); } static int comc_init(int arg) { if (comc_started && arg == 0) return 0; comc_started = 1; outb(COMPORT + com_cfcr, CFCR_DLAB | COMC_FMT); outb(COMPORT + com_dlbl, COMC_BPS(COMSPEED) & 0xff); outb(COMPORT + com_dlbh, COMC_BPS(COMSPEED) >> 8); outb(COMPORT + com_cfcr, COMC_FMT); outb(COMPORT + com_mcr, MCR_RTS | MCR_DTR); do inb(COMPORT + com_data); while (inb(COMPORT + com_lsr) & LSR_RXRDY); return(0); } static void comc_putchar(int c) { int wait; for (wait = COMC_TXWAIT; wait > 0; wait--) if (inb(COMPORT + com_lsr) & LSR_TXRDY) { outb(COMPORT + com_data, c); break; } } static int comc_getchar(void) { return(comc_ischar() ? inb(COMPORT + com_data) : -1); } static int comc_ischar(void) { return(inb(COMPORT + com_lsr) & LSR_RXRDY); }