#
# GENERIC -- Generic machine with WD/AHx/NCR/BTx family disks
#
#	$Id: GENERIC,v 1.70 1996/05/13 04:29:13 nate Exp $
#

# GENERIC98 -- Generic PC98 machine with WD/SBIC55 disks

machine		"pc98"
cpu		"I386_CPU"
cpu		"I486_CPU"
cpu		"I586_CPU"
cpu		"I686_CPU"
ident		"GENERIC98"
maxusers	10

options		"PC98"			#PC98
options		MATH_EMULATE		#Support for x87 emulation
#options		GPL_MATH_EMULATE	#GPL-licensed emulator
options		INET			#InterNETworking
options		FFS			#Berkeley Fast Filesystem
options		NFS			#Network Filesystem
options		MSDOSFS			#MSDOS Filesystem
options		"CD9660"		#ISO 9660 Filesystem
options		PROCFS			#Process filesystem
options		"COMPAT_43"		#Compatible with BSD 4.3 [KEEP THIS!]
options		SYSVSHM			
options		SYSVSEM
options		SYSVMSG
options		UCONSOLE		#Allow users to grab the console
options		FAILSAFE		#Be conservative
options		"MAXCONS=4"		#4 virtual consoles
options		BOUNCE_BUFFERS		#include support for DMA bounce buffers
options		EPSON_BOUNCEDMA		#use bounce buufer for 15-16M
#options		EPSON_MEMWIN		#EPSON memory window support
options		"LINE30"
options		AUTO_CLOCK
options		COM_MULTIPORT

#
#	non-Intel CPU support
#
#options	"IBM_486SLC"		# IBM486SLC/SLC2 support
#options	"CYRIX_486DLC"		# Cyrix 486DLC/SLC/DLC2/SLC2 support
#option		"CYRIX_5X86"		# Cyrix 5x86 support
#options	SUSP_HLT		# CPU enters suspend mode when HALT
#options	"DISABLE_5X86_LSSER"	# Load-Store reordering enable

#
#	sbic55.c.new
#
#options	SCSI_SYNC		# synchronous transfer mode
#options	FORCE_BUSMASTER
#options	"HA55BS_ID=0"

#
#	IBM-PC HDD support
#options	COMPAT_ATDISK

#
#	FreeBSD(98)-current is a *TEST VERSION*.  
#	It is highly recomended to compile with following options, and to
#	record the panic messages and the result of trace command brefore 
#	reporting a problem.
#
#	If you need more information for the kernel, KTRACE option may help
#	you.
#
options		DDB
options		DIAGNOSTIC
#options	KTRACE


config		kernel	root on wd0

controller	nec0
controller	pci0

controller	fdc0	at nec? port "IO_FD1" bio irq 11 drq 2 vector fdintr
disk		fd0	at fdc0 drive 0
disk		fd1	at fdc0 drive 1
disk		fd2	at fdc0 drive 2
disk		fd3	at fdc0 drive 3
tape		ft0	at fdc0 drive 4

controller	wdc0	at nec? port "IO_WD1" bio irq 9 vector wdintr
disk		wd0	at wdc0 drive 0
#disk		wd1	at wdc0 drive 1
#disk		wd2	at wdc0 drive 2
#disk		wd3	at wdc0 drive 3

options		ATAPI	# Enable ATAPI support for IDE bus
options		ATAPI_STATIC	#Don't do it as an LKM
device		wcd	#IDE CD-ROM

controller	sbic0	at nec? port "IO_SCSI" bio irq 5 drq 3 vector sbicintr
#controller	sbic0	at nec? port "IO_SCSI" bio irq 5 drq 3 flags 0xff vector sbicintr
controller	aic0	at nec? port 0x1840 bio irq 5 vector aicintr
controller	ahc0

controller	scbus0

device		sd0

device		st0

device		cd0	#Only need one of these, the code dynamically grows

device		od0

controller	matcd0	at nec? port? bio

# syscons is the default console driver, resembling an SCO console
device		sc0	at nec? port "IO_KBD" tty irq 1 vector scintr
#options		XSERVER			# include code for XFree86

# Mandatory, don't remove
device		npx0	at nec? port "IO_NPX" irq 8 vector npxintr

#
# Laptop support (see LINT for more options)
#
device		apm0    at nec?	disable	# Advanced Power Management
options		APM_BROKEN_STATCLOCK	# Workaround some buggy APM BIOS
# PCCARD (PCMCIA) support
#controller	crd0
#device		pcic0	at crd?
#device		pcic1	at crd?

device		lpt0	at nec? port "IO_LPT"  tty
device		mse0	at nec? port "IO_MSE" tty irq 13 vector mseintr

device		sio0	at nec? port "IO_COM1" tty irq 4 vector siointr
device		sio1	at nec? port 0xd2  tty irq 5 flags 0x101 vector siointr
device		sio2	at nec? port 0x8d2 tty flags 0x101 vector siointr


device ed0 at nec? port 0x00d0 net irq 6 vector edintr
device ed1 at nec? port 0x56d0 net irq 5 vector edintr
device ed2 at nec? port 0x00d0 net irq 6 iomem 0xd0000 iosiz 16384 vector edintr
device fe0 at nec? prot 0x00d0 net irq 3 vector feintr
device zp0 at nec? port 0x0300 net irq 10 iomem 0xe0000 vector zpintr 
device ep0 at nec? port 0x00d0 net irq 6 vector epintr

#controller	snd0
#device	sb0	at nec? port 0x20d2 irq 10 conflicts drq 3 vector sbintr
#device	sbxvi0 	at nec? drq 3
#device	sbmidi0	at nec? port 0x80d2
#device	opl0	at nec? port 0x28d2

#device pcm0    at nec? port 0xa460 irq 12 vector pcmintr

#device	mss0	at nec? port 0xf40 irq12 drq 1 vectro adintr

pseudo-device	loop
pseudo-device	ether
pseudo-device	log
pseudo-device	sl	2
# ijppp uses tun instead of ppp device
#pseudo-device	ppp	1
pseudo-device	tun	1
pseudo-device	pty	16
# keep this if you want to be able to continue to use /stand/sysinstall
pseudo-device	gzip		# Exec gzipped a.out's