# This is loader.conf - a file full of useful variables that you can # set to change the default load behavior of your system. You should # not edit this file! Put any overrides into one of the # loader_conf_files instead and you will be able to update these # defaults later without spamming your local configuration information. # # All arguments must be in double quotes. # # $FreeBSD: head/sys/boot/forth/loader.conf 102011 2002-08-17 16:23:44Z orion $ ############################################################## ### Basic configuration options ############################ ############################################################## exec=".( Loading /boot/defaults/loader.conf ) cr" kernel="kernel" # /boot sub-directory containing kernel and modules bootfile="kernel" # Kernel name (possibly absolute path) kernel_options="" userconfig_script_load="NO" userconfig_script_name="/boot/kernel.conf" userconfig_script_type="userconfig_script" loader_conf_files="/boot/device.hints /boot/loader.conf /boot/loader.conf.local" nextboot_conf="/boot/nextboot.conf" nextboot_enable="NO" verbose_loading="NO" # Set to YES for verbose loader output ############################################################## ### Splash screen configuration ############################ ############################################################## splash_bmp_load="NO" # Set this to YES for bmp splash screen! splash_pcx_load="NO" # Set this to YES for pcx splash screen! vesa_load="NO" # Set this to YES to load the vesa module bitmap_load="NO" # Set this to YES if you want splash screen! bitmap_name="splash.bmp" # Set this to the name of the bmp or pcx file bitmap_type="splash_image_data" # and place it on the module_path ############################################################## ### Loader settings ######################################## ############################################################## #autoboot_delay="10" # Delay in seconds before autobooting #console="vidconsole" # Set the current console #currdev="disk1s1a" # Set the current device module_path="/boot/kernel;/boot/modules;/modules" # Set the module search path #prompt="\\${interpret}" # Set the command prompt #root_disk_unit="0" # Force the root disk unit number #rootdev="disk1s1a" # Set the root filesystem ############################################################## ### Kernel settings ######################################## ############################################################## # The following boot_ variables are enabled # by setting them to any value. #boot_askname="" # Prompt the user for the name of the root device #boot_ddb="" # Instructs the kernel to start in the DDB debugger #boot_gdb="" # Selects gdb-remote mode for the kernel debugger #boot_single="" # Start system in single-user mode #boot_userconfig="" # Run kernel's interactive device configuration program #boot_verbose="" # Causes extra debugging information to be printed #init_path="/sbin/init:/sbin/oinit:/sbin/init.bak:/stand/sysinstall" # Sets the list of init candidates #dumpdev="ad0s1b" # Set device for crash dumps ############################################################## ### Kernel tunables ######################################## ############################################################## #hw.physmem="1G" # Limit phyiscal memory. See loader(8) #kern.dfldsiz="" # Set the initial data size limit #kern.dflssiz="" # Set the initial stack size limit #kern.hz="100" # Set the kernel interval timer rate #kern.maxbcache="" # Set the max buffer cache KVA storage #kern.maxdsiz="" # Set the max data size #kern.maxfiles="" # Set the sys. wide open files limit #kern.maxproc="" # Set the maximum # of processes #kern.maxssiz="" # Set the max stack size #kern.maxswzone="" # Set the max swmeta KVA storage #kern.maxtsiz="" # Set the max text size #kern.maxusers="32" # Set size of various static tables #kern.nbuf="" # Set the number of buffer headers #kern.ncallout="" # Set the maximum # of timer events #kern.sgrowsiz="" # Set the amount to grow stack #kern.ipc.maxsockets="" # Set the maximum number of sockets avaliable #kern.ipc.nmbclusters="" # Set the number of mbuf clusters #kern.ipc.nmbufs="" # Set the maximum number of mbufs #kern.ipc.nsfbufs="" # Set the number of sendfile(2) bufs #kern.vm.kmem.size="" # Sets the size of kernel memory (bytes) #machdep.pccard.pcic_irq="0" # Assigns PCCARD controller IRQ (0=polled) #net.inet.tcp.tcbhashsize="" # Set the value of TCBHASHSIZE #vfs.root.mountfrom="" # Specify root partition in a way the # kernel understands #debug.ktr.cpumask="0xf" # Bitmask of CPUs to enable KTR on #debug.ktr.mask="0x1200" # Bitmask of KTR events to enable #debug.ktr.verbose="1" # Enable console dump of KTR events ############################################################## ### Filesystem and related modules ######################### ############################################################## # Filesystems cd9660_load="NO" # ISO 9660 filesystem coda_load="NO" # CODA filesystem fdescfs_load="NO" # Filedescriptors filesystem msdosfs_load="NO" # FAT-12/16/32 nfs_load="NO" # NFS ntfs_load="NO" # NTFS nullfs_load="NO" # Null filesystem portalfs_load="NO" # Portal filesystem procfs_load="NO" # Process filesystem umapfs_load="NO" # User-id map filesystem unionfs_load="NO" # Union filesystem # Related stuff ccd_load="NO" # Concatenated disk driver vinum_load="NO" # Concatenated/mirror/raid driver md_load="NO" # Memory disk driver (vnode/swap/malloc) ############################################################## ### Screen saver modules ################################### ############################################################## # This is best done in rc.conf screensave_load="NO" # Set to YES to load a screensaver module screensave_name="green_saver" # Set to the name of the screensaver module ############################################################## ### Emulation modules ###################################### ############################################################## fpu_load="NO" # Floating point emulation gnufpu_load="NO" # GNU floating point emulation ibcs2_load="NO" # IBCS2 (SCO) emulation ibcs2_coff_load="NO" linux_load="NO" # Linux emulation svr4_load="NO" # SystemV R4 emulation streams_load="NO" # System V streams module ############################################################## ### Networking modules ##################################### ############################################################## if_disc_load="NO" # Discard device if_ppp_load="NO" # Kernel ppp if_sl_load="NO" # SLIP if_tun_load="NO" # Tunnel driver (user process ppp) ipfw_load="NO" # Firewall ############################################################## ### Networking drivers ##################################### ############################################################## miibus_load="NO" # miibus support, needed for some drivers if_an_load="NO" # Aironet 4500/4800 802.11 wireless NICs if_dc_load="NO" # DEC/Intel 21143 and various workalikes if_fxp_load="NO" # Intel EtherExpress PRO/100B (82557, 82558) if_rl_load="NO" # RealTek 8129/8139 if_sf_load="NO" # Adaptec Duralink PCI (AIC-6915 "starfire") if_sis_load="NO" # Silicon Integrated Systems SiS 900/7016 if_sk_load="NO" # SysKonnect SK-984x series PCI gigabit ethernet if_ti_load="NO" # Alteon Networks Tigon 1 and Tigon 2 if_tl_load="NO" # Texas Instruments TNETE100 ("ThunderLAN") if_vr_load="NO" # VIA Rhine I and Rhine II if_wb_load="NO" # Winbond W89C840F if_wi_load="NO" # WaveLAN/IEEE 802.11 wireless NICs if_wx_load="NO" # Intel Gigabit Ethernet if_xl_load="NO" # 3Com Etherlink XL (3c900, 3c905, 3c905B) ############################################################## ### Netgraph modules ####################################### ############################################################## ng_UI_load="NO" # UI netgraph node type ng_async_load="NO" # asynchronous framing netgraph node type ng_bpf_load="NO" # Berkeley packet filter netgraph node type ng_bridge_load="NO" # Ethernet bridging netgraph node type ng_cisco_load="NO" # Cisco HDLC protocol netgraph node type ng_echo_load="NO" # Netgraph echo node type ng_ether_load="NO" # Ethernet netgraph node type ng_frame_relay_load="NO" # frame relay netgraph node type ng_hole_load="NO" # Netgraph discard node type ng_iface_load="NO" # interface Netgraph node type ng_ksocket_load="NO" # kernel socket netgraph node type ng_lmi_load="NO" # frame relay LMI protocol netgraph node type ng_mppc_load="NO" # Microsoft MPPC/MPPE compression and encryption netgraph node type ng_one2many_load="NO" # packet multiplexing netgraph node type ng_ppp_load="NO" # PPP protocol netgraph node type ng_pppoe_load="NO" # RFC 2516 PPPOE protocol netgraph node type ng_pptpgre_load="NO" # PPTP GRE protocol netgraph node type ng_rfc1490_load="NO" # RFC 1490 netgraph node type ng_socket_load="NO" # Netgraph socket node type ng_tee_load="NO" # Netgraph ``tee'' node type ng_tty_load="NO" # Netgraph node type that is also a line discipline ng_vjc_load="NO" # Van Jacobsen compression netgraph node type ############################################################## ### Sound modules ########################################## ############################################################## snd_pcm_load="NO" # Digital sound subsystem snd_ad1816_load="NO" # ad1816 snd_cmi_load="NO" # cmi snd_csa_load="NO" # csa snd_cs4281_load="NO" # cs4281 snd_ds1_load="NO" # ds1 snd_emu10k1_load="NO" # Creative Sound Blaster Live snd_ess_load="NO" # ess snd_es137x_load="NO" # es137x snd_fm801_load="NO" # fm801 snd_ich_load="NO" # Intel ICH snd_maestro_load="NO" # Maestro snd_maestro3_load="NO" # Maestro3 snd_mss_load="NO" # Mss snd_neomagic_load="NO" # Neomagic snd_sbc_load="NO" # Sbc snd_sb8_load="NO" # Sound Blaster Pro snd_sb16_load="NO" # Sound Blaster 16 snd_solo_load="NO" # Solo snd_t4dwave_load="NO" # t4dwave snd_via8233_load="NO" # via8233 snd_via82c686_load="NO" # via82c686 snd_load="NO" # All sound drivers ############################################################## ### USB modules ############################################ ############################################################## usb_load="NO" # USB subsystem udbp_load="NO" # USB double bulk pipe host 2 host cables ugen_load="NO" # USB generic device, if all else fails ... ufm_load="NO" # Fm Radio uhid_load="NO" # Human Interface Devices ukbd_load="NO" # Keyboard ulpt_load="NO" # Printer ums_load="NO" # Mouse umass_load="NO" # Mass Storage Devices umodem_load="NO" # Modems uscanner_load="NO" # Scanners if_aue_load="NO" # ADMtek USB ethernet if_cue_load="NO" # CATC USB ethernet if_kue_load="NO" # Kawasaki LSI USB ethernet ############################################################## ### Other modules ########################################## ############################################################## bktr_load="NO" # Brooktree Bt848/Bt878 TV/Video Capture Card ispfw_load="NO" # Qlogic ISP Firmware agp_load="NO" # agp module accf_data_load="NO" # Wait for data accept filter accf_http_load="NO" # Wait for full HTTP request accept filter random_load="NO" # Random device atspeaker_load="NO" # AT speaker module ############################################################## ### ACPI settings ########################################## ############################################################## acpi_dsdt_load="NO" # DSDT Overriding acpi_dsdt_type="acpi_dsdt" # Don't change this acpi_dsdt_name="/boot/acpi_dsdt.aml" # Override DSDT in BIOS by this file ############################################################## ### TrustedBSD MAC settings ################################## ############################################################## mac_biba_load="NO" # Biba MAC policy mac_bsdextended_load="NO" # BSD/extended MAC policy mac_ifoff="NO" # Interface silencing policy mac_mls_load="NO" # MLS MAC policy mac_none_load="NO" # Null MAC policy mac_partition_load="NO" # Partition MAC policy mac_seeotheruids_load="NO" # UID visbility MAC policy ############################################################## ### Module loading syntax example ########################## ############################################################## #module_load="YES" # loads module "module" #module_name="realname" # uses "realname" instead of "module" #module_type="type" # passes "-t type" to load #module_flags="flags" # passes "flags" to the module #module_before="cmd" # executes "cmd" before loading the module #module_after="cmd" # executes "cmd" after loading the module #module_error="cmd" # executes "cmd" if load fails