/* * Device driver optimized for the Symbios/LSI 53C896/53C895A/53C1010 * PCI-SCSI controllers. * * Copyright (C) 1999 Gerard Roudier * * This driver also supports the following Symbios/LSI PCI-SCSI chips: * 53C810A, 53C825A, 53C860, 53C875, 53C876, 53C885, 53C895. * * but does not support earlier chips as the following ones: * 53C810, 53C815, 53C825. * * This driver for FreeBSD-CAM is derived from the Linux sym53c8xx driver. * Copyright (C) 1998-1999 Gerard Roudier * * The sym53c8xx driver is derived from the ncr53c8xx driver that had been * a port of the FreeBSD ncr driver to Linux-1.2.13. * * The original ncr driver has been written for 386bsd and FreeBSD by * Wolfgang Stanglmeier * Stefan Esser * Copyright (C) 1994 Wolfgang Stanglmeier * * The initialisation code, and part of the code that addresses * FreeBSD-CAM services is based on the aic7xxx driver for FreeBSD-CAM * written by Justin T. Gibbs. * * Other major contributions: * * NVRAM detection and reading. * Copyright (C) 1997 Richard Waltham * *----------------------------------------------------------------------------- * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. The name of the author may not be used to endorse or promote products * derived from this software without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE AUTHORS AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. */ #ifndef SYM_CONF_H #define SYM_CONF_H /*------------------------------------------------------------------- * Static configuration. *------------------------------------------------------------------- */ /* * Support for earliest LSI53C1010 boards. * Commercial chips will be fixed, and then the * corresponding code will get useless. */ /* #define SYMCONF_BROKEN_U3EN_SUPPORT */ /* * Use Normal IO instead of MMIO. */ /* #define SYMCONF_IOMAPPED */ /* * Max tags for a device (logical unit) * We use a power of 2, (7) means 2<<7=128 * Maximum is 8 -> 256 tags */ #define SYMCONF_MAX_TAG_ORDER (6) /* * Max number of scatter/gather entries for en IO. * Each entry costs 8 bytes in the internal CCB data structure. * For now 65 should suffice given the BSD O/Ses capabilities. */ #define SYMCONF_MAX_SG (33) /* * Max number of targets. * Maximum is 16 and you are advised not to change this value. */ #define SYMCONF_MAX_TARGET (16) /* * Max number of logical units. * SPI-2 allows up to 64 logical units, but in real life, target * that implements more that 7 logical units are pretty rare. * Anyway, the cost of accepting up to 64 logical unit is low in * this driver, thus going with the maximum is acceptable. */ #define SYMCONF_MAX_LUN (8) /* * Max number of IO control blocks queued to the controller. * Each entry needs 8 bytes and the queues are allocated contiguously. * Since we donnot want to allocate more than a page, the theorical * maximum is PAGE_SIZE/8. For safety, we announce a bit less to the * access method. :) * When not supplied, as it is suggested, the driver compute some * good value for this parameter. */ /* #define SYMCONF_MAX_START (PAGE_SIZE/8 - 16) */ /* * Support for NVRAM. */ #define SYMCONF_NVRAM_SUPPORT /* #define SYMCONF_DEBUG_SUPPORT */ /* * Support for Immediate Arbitration. * Not advised. */ /* #define SYMCONF_IARB_SUPPORT */ /* * Not needed on FreeBSD, since the system allocator * does provide naturally aligned addresses. */ #define SYMCONF_USE_INTERNAL_ALLOCATOR /*------------------------------------------------------------------- * Configuration that could be dynamic if it was possible * to pass arguments to the driver. *------------------------------------------------------------------- */ /* * HOST default scsi id. */ #define SYMSETUP_HOST_ID 7 /* * Max synchronous transfers. */ #define SYMSETUP_MIN_SYNC (9) /* * Max wide order. */ #define SYMSETUP_MAX_WIDE (1) /* * Max SCSI offset. */ #define SYMSETUP_MAX_OFFS (64) /* * Default number of tags. */ #define SYMSETUP_MAX_TAG (64) /* * SYMBIOS NVRAM format support. */ #define SYMSETUP_SYMBIOS_NVRAM (1) /* * TEKRAM NVRAM format support. */ #define SYMSETUP_TEKRAM_NVRAM (1) /* * PCI parity checking. */ #define SYMSETUP_PCI_PARITY (1) /* * SCSI parity checking. */ #define SYMSETUP_SCSI_PARITY (1) /* * SCSI activity LED. */ #define SYMSETUP_SCSI_LED (0) /* * SCSI differential. */ #define SYMSETUP_SCSI_DIFF (0) /* * IRQ mode. */ #define SYMSETUP_IRQ_MODE (0) /* * Check SCSI BUS signal on reset. */ #define SYMSETUP_SCSI_BUS_CHECK (1) /* * Max burst for PCI (1<