/*- * Copyright (c) 1998 - 2004 Søren Schmidt * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer, * without modification, immediately at the beginning of the file. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. The name of the author may not be used to endorse or promote products * derived from this software without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. * * $FreeBSD: head/sys/dev/ata/ata-all.h 125199 2004-01-29 15:03:01Z sos $ */ /* ATA register defines */ #define ATA_DATA 0x00 /* data register */ #define ATA_ERROR 0x01 /* (R) error register */ #define ATA_E_ILI 0x01 /* illegal length */ #define ATA_E_NM 0x02 /* no media */ #define ATA_E_ABORT 0x04 /* command aborted */ #define ATA_E_MCR 0x08 /* media change request */ #define ATA_E_IDNF 0x10 /* ID not found */ #define ATA_E_MC 0x20 /* media changed */ #define ATA_E_UNC 0x40 /* uncorrectable data */ #define ATA_E_ICRC 0x80 /* UDMA crc error */ #define ATA_E_MASK 0x0f /* error mask */ #define ATA_SK_MASK 0xf0 /* sense key mask */ #define ATA_SK_NO_SENSE 0x00 /* no specific sense key info */ #define ATA_SK_RECOVERED_ERROR 0x10 /* command OK, data recovered */ #define ATA_SK_NOT_READY 0x20 /* no access to drive */ #define ATA_SK_MEDIUM_ERROR 0x30 /* non-recovered data error */ #define ATA_SK_HARDWARE_ERROR 0x40 /* non-recoverable HW failure */ #define ATA_SK_ILLEGAL_REQUEST 0x50 /* invalid command param(s) */ #define ATA_SK_UNIT_ATTENTION 0x60 /* media changed */ #define ATA_SK_DATA_PROTECT 0x70 /* write protect */ #define ATA_SK_BLANK_CHECK 0x80 /* blank check */ #define ATA_SK_VENDOR_SPECIFIC 0x90 /* vendor specific skey */ #define ATA_SK_COPY_ABORTED 0xa0 /* copy aborted */ #define ATA_SK_ABORTED_COMMAND 0xb0 /* command aborted, try again */ #define ATA_SK_EQUAL 0xc0 /* equal */ #define ATA_SK_VOLUME_OVERFLOW 0xd0 /* volume overflow */ #define ATA_SK_MISCOMPARE 0xe0 /* data dont match the medium */ #define ATA_SK_RESERVED 0xf0 #define ATA_FEATURE 0x01 /* (W) feature register */ #define ATA_F_DMA 0x01 /* enable DMA */ #define ATA_F_OVL 0x02 /* enable overlap */ #define ATA_COUNT 0x02 /* (W) sector count */ #define ATA_IREASON 0x02 /* (R) interrupt reason */ #define ATA_I_CMD 0x01 /* cmd (1) | data (0) */ #define ATA_I_IN 0x02 /* read (1) | write (0) */ #define ATA_I_RELEASE 0x04 /* released bus (1) */ #define ATA_I_TAGMASK 0xf8 /* tag mask */ #define ATA_SECTOR 0x03 /* sector # */ #define ATA_CYL_LSB 0x04 /* cylinder# LSB */ #define ATA_CYL_MSB 0x05 /* cylinder# MSB */ #define ATA_DRIVE 0x06 /* Sector/Drive/Head register */ #define ATA_D_LBA 0x40 /* use LBA addressing */ #define ATA_D_IBM 0xa0 /* 512 byte sectors, ECC */ #define ATA_CMD 0x07 /* command register */ #define ATA_STATUS 0x07 /* status register */ #define ATA_S_ERROR 0x01 /* error */ #define ATA_S_INDEX 0x02 /* index */ #define ATA_S_CORR 0x04 /* data corrected */ #define ATA_S_DRQ 0x08 /* data request */ #define ATA_S_DSC 0x10 /* drive seek completed */ #define ATA_S_SERVICE 0x10 /* drive needs service */ #define ATA_S_DWF 0x20 /* drive write fault */ #define ATA_S_DMA 0x20 /* DMA ready */ #define ATA_S_READY 0x40 /* drive ready */ #define ATA_S_BUSY 0x80 /* busy */ #define ATA_ALTSTAT 0x08 /* alternate status register */ #define ATA_ALTOFFSET 0x206 /* alternate registers offset */ #define ATA_PCCARD_ALTOFFSET 0x0e /* do for PCCARD devices */ #define ATA_PC98_ALTOFFSET 0x10c /* do for PC98 devices */ #define ATA_A_IDS 0x02 /* disable interrupts */ #define ATA_A_RESET 0x04 /* RESET controller */ #define ATA_A_4BIT 0x08 /* 4 head bits */ /* ATAPI misc defines */ #define ATAPI_MAGIC_LSB 0x14 #define ATAPI_MAGIC_MSB 0xeb #define ATAPI_P_READ (ATA_S_DRQ | ATA_I_IN) #define ATAPI_P_WRITE (ATA_S_DRQ) #define ATAPI_P_CMDOUT (ATA_S_DRQ | ATA_I_CMD) #define ATAPI_P_DONEDRQ (ATA_S_DRQ | ATA_I_CMD | ATA_I_IN) #define ATAPI_P_DONE (ATA_I_CMD | ATA_I_IN) #define ATAPI_P_ABORT 0 /* misc defines */ #define ATA_PRIMARY 0x1f0 #define ATA_SECONDARY 0x170 #define ATA_PC98_BANK 0x432 #define ATA_IOSIZE 0x08 #define ATA_PC98_IOSIZE 0x10 #define ATA_ALTIOSIZE 0x01 #define ATA_BMIOSIZE 0x08 #define ATA_PC98_BANKIOSIZE 0x01 #define ATA_IOADDR_RID 0 #define ATA_ALTADDR_RID 1 #define ATA_BMADDR_RID 0x20 #define ATA_PC98_ALTADDR_RID 8 #define ATA_PC98_BANKADDR_RID 9 #define ATA_IRQ_RID 0 #define ATA_DEV(device) ((device == ATA_MASTER) ? 0 : 1) /* busmaster DMA related defines */ #define ATA_DMA_ENTRIES 256 #define ATA_DMA_EOT 0x80000000 #define ATA_BMCMD_PORT 0x09 #define ATA_BMCMD_START_STOP 0x01 #define ATA_BMCMD_WRITE_READ 0x08 #define ATA_BMDEVSPEC_0 0x0a #define ATA_BMSTAT_PORT 0x0b #define ATA_BMSTAT_ACTIVE 0x01 #define ATA_BMSTAT_ERROR 0x02 #define ATA_BMSTAT_INTERRUPT 0x04 #define ATA_BMSTAT_MASK 0x07 #define ATA_BMSTAT_DMA_MASTER 0x20 #define ATA_BMSTAT_DMA_SLAVE 0x40 #define ATA_BMSTAT_DMA_SIMPLEX 0x80 #define ATA_BMDEVSPEC_1 0x0c #define ATA_BMDTP_PORT 0x0d #define ATA_IDX_ADDR 0x0e #define ATA_IDX_DATA 0x0f #define ATA_MAX_RES 0x10 #define ATA_INTR_FLAGS (INTR_MPSAFE|INTR_TYPE_BIO|INTR_ENTROPY) #define ATA_OP_CONTINUES 0 #define ATA_OP_FINISHED 1 struct ata_request { struct ata_device *device; /* ptr to device softc */ void *driver; /* driver specific */ union { struct { u_int8_t command; /* command reg */ u_int8_t feature; /* feature reg */ u_int64_t lba; /* lba reg */ u_int16_t count; /* count reg */ } ata; struct { u_int8_t ccb[16]; /* ATAPI command block */ } atapi; } u; u_int8_t status; /* ATA status */ u_int8_t error; /* ATA error */ u_int8_t dmastat; /* DMA status */ u_int32_t bytecount; /* bytes to transfer */ u_int32_t transfersize; /* bytes pr transfer */ u_int32_t donecount; /* bytes transferred */ caddr_t data; /* pointer to data buf */ int flags; #define ATA_R_CONTROL 0x0001 #define ATA_R_READ 0x0002 #define ATA_R_WRITE 0x0004 #define ATA_R_DMA 0x0008 #define ATA_R_ATAPI 0x0010 #define ATA_R_QUIET 0x0020 #define ATA_R_INTR_SEEN 0x0040 #define ATA_R_TIMEOUT 0x0080 #define ATA_R_ORDERED 0x0100 #define ATA_R_IMMEDIATE 0x0200 #define ATA_R_REQUEUE 0x0400 #define ATA_R_DEBUG 0x1000 void (*callback)(struct ata_request *request); struct sema done; /* request done sema */ int retries; /* retry count */ int timeout; /* timeout for this cmd */ struct callout_handle timeout_handle; /* handle for untimeout */ int result; /* result error code */ struct task task; /* task management */ struct bio *bio; /* bio for this request */ TAILQ_ENTRY(ata_request) sequence; /* sequence management */ TAILQ_ENTRY(ata_request) chain; /* list management */ }; /* define this for debugging request processing */ #if 0 #define ATA_DEBUG_RQ(request, string) \ { \ if (request->flags & ATA_R_DEBUG) \ ata_prtdev(request->device, "req=%08x %s " string "\n", \ (u_int)request, ata_cmd2str(request)); \ } #else #define ATA_DEBUG_RQ(request, string) #endif /* structure describing an ATA/ATAPI device */ struct ata_device { struct ata_channel *channel; int unit; /* unit number */ #define ATA_MASTER 0x00 #define ATA_SLAVE 0x10 char *name; /* device name */ struct ata_params *param; /* ata param structure */ void *softc; /* ptr to softc for device */ void (*attach)(struct ata_device *atadev); void (*detach)(struct ata_device *atadev); void (*config)(struct ata_device *atadev); void (*start)(struct ata_device *atadev); int flags; #define ATA_D_USE_CHS 0x0001 #define ATA_D_DETACHING 0x0002 #define ATA_D_MEDIA_CHANGED 0x0004 #define ATA_D_ENC_PRESENT 0x0008 int cmd; /* last cmd executed */ int mode; /* transfermode */ void (*setmode)(struct ata_device *atadev, int mode); }; /* structure for holding DMA address data */ struct ata_dmaentry { u_int32_t base; u_int32_t count; }; /* structure holding DMA related information */ struct ata_dma { bus_dma_tag_t dmatag; /* parent DMA tag */ bus_dma_tag_t cdmatag; /* control DMA tag */ bus_dmamap_t cdmamap; /* control DMA map */ bus_dma_tag_t ddmatag; /* data DMA tag */ bus_dmamap_t ddmamap; /* data DMA map */ struct ata_dmaentry *dmatab; /* DMA transfer table */ bus_addr_t mdmatab; /* bus address of dmatab */ u_int32_t alignment; /* DMA engine alignment */ u_int32_t boundary; /* DMA engine boundary */ u_int32_t max_iosize; /* DMA engine max IO size */ u_int32_t cur_iosize; /* DMA engine current IO size */ int flags; #define ATA_DMA_ACTIVE 0x01 /* DMA transfer in progress */ #define ATA_DMA_READ 0x02 /* transaction is a read */ void (*alloc)(struct ata_channel *ch); void (*free)(struct ata_channel *ch); int (*load)(struct ata_device *atadev, caddr_t data, int32_t count,int dir); int (*unload)(struct ata_channel *ch); int (*start)(struct ata_channel *ch); int (*stop)(struct ata_channel *ch); }; /* structure holding lowlevel functions */ struct ata_lowlevel { void (*reset)(struct ata_channel *ch); int (*transaction)(struct ata_request *request); void (*interrupt)(void *channel); }; /* structure holding resources for an ATA channel */ struct ata_resource { struct resource *res; int offset; }; /* structure describing an ATA channel */ struct ata_channel { struct device *dev; /* device handle */ int unit; /* channel number */ struct ata_resource r_io[ATA_MAX_RES];/* I/O resources */ struct resource *r_irq; /* interrupt of this channel */ void *ih; /* interrupt handle */ struct ata_lowlevel hw; /* lowlevel HW functions */ struct ata_dma *dma; /* DMA data / functions */ int flags; /* channel flags */ #define ATA_NO_SLAVE 0x01 #define ATA_USE_16BIT 0x02 #define ATA_USE_PC98GEOM 0x04 #define ATA_ATAPI_DMA_RO 0x08 #define ATA_48BIT_ACTIVE 0x10 #define ATA_IMMEDIATE_MODE 0x20 struct ata_device device[2]; /* devices on this channel */ #define MASTER 0x00 #define SLAVE 0x01 int devices; /* what is present */ #define ATA_ATA_MASTER 0x01 #define ATA_ATA_SLAVE 0x02 #define ATA_ATAPI_MASTER 0x04 #define ATA_ATAPI_SLAVE 0x08 int state; /* ATA channel state control */ #define ATA_IDLE 0x0000 #define ATA_ACTIVE 0x0001 #define ATA_CONTROL 0x0002 void (*reset)(struct ata_channel *); void (*locking)(struct ata_channel *, int); #define ATA_LF_LOCK 0x0001 #define ATA_LF_UNLOCK 0x0002 struct mtx queue_mtx; /* queue lock */ TAILQ_HEAD(, ata_request) ata_queue; /* head of ATA queue */ void *running; /* currently running request */ }; /* ATAPI request sense structure */ struct atapi_sense { u_int8_t error_code :7; /* current or deferred errors */ u_int8_t valid :1; /* follows ATAPI spec */ u_int8_t segment; /* Segment number */ u_int8_t sense_key :4; /* sense key */ u_int8_t reserved2_4 :1; /* reserved */ u_int8_t ili :1; /* incorrect length indicator */ u_int8_t eom :1; /* end of medium */ u_int8_t filemark :1; /* filemark */ u_int32_t cmd_info __packed; /* cmd information */ u_int8_t sense_length; /* additional sense len (n-7) */ u_int32_t cmd_specific_info __packed; /* additional cmd spec info */ u_int8_t asc; /* additional sense code */ u_int8_t ascq; /* additional sense code qual */ u_int8_t replaceable_unit_code; /* replaceable unit code */ u_int8_t sk_specific :7; /* sense key specific */ u_int8_t sksv :1; /* sense key specific info OK */ u_int8_t sk_specific1; /* sense key specific */ u_int8_t sk_specific2; /* sense key specific */ }; /* disk bay/enclosure related */ #define ATA_LED_OFF 0x00 #define ATA_LED_RED 0x01 #define ATA_LED_GREEN 0x02 #define ATA_LED_ORANGE 0x03 #define ATA_LED_MASK 0x03 /* externs */ extern devclass_t ata_devclass; extern int ata_wc; /* public prototypes */ /* ata-all.c: */ int ata_probe(device_t dev); int ata_attach(device_t dev); int ata_detach(device_t dev); int ata_suspend(device_t dev); int ata_resume(device_t dev); int ata_printf(struct ata_channel *ch, int device, const char *fmt, ...) __printflike(3, 4); int ata_prtdev(struct ata_device *atadev, const char *fmt, ...) __printflike(2, 3); void ata_set_name(struct ata_device *atadev, char *name, int lun); void ata_free_name(struct ata_device *atadev); int ata_get_lun(u_int32_t *map); int ata_test_lun(u_int32_t *map, int lun); void ata_free_lun(u_int32_t *map, int lun); char *ata_mode2str(int mode); int ata_pmode(struct ata_params *ap); int ata_wmode(struct ata_params *ap); int ata_umode(struct ata_params *ap); int ata_limit_mode(struct ata_device *atadev, int mode, int maxmode); /* ata-queue.c: */ int ata_reinit(struct ata_channel *ch); void ata_start(struct ata_channel *ch); int ata_controlcmd(struct ata_device *atadev, u_int8_t command, u_int16_t feature, u_int64_t lba, u_int16_t count); int ata_atapicmd(struct ata_device *atadev, u_int8_t *ccb, caddr_t data, int count, int flags, int timeout); void ata_queue_request(struct ata_request *request); void ata_finish(struct ata_request *request); char *ata_cmd2str(struct ata_request *request); /* ata-lowlevel.c: */ void ata_generic_hw(struct ata_channel *ch); /* subdrivers */ void ad_attach(struct ata_device *atadev); void acd_attach(struct ata_device *atadev); void afd_attach(struct ata_device *atadev); void ast_attach(struct ata_device *atadev); void atapi_cam_attach_bus(struct ata_channel *ch); void atapi_cam_detach_bus(struct ata_channel *ch); void atapi_cam_reinit_bus(struct ata_channel *ch); /* macros for alloc/free of ata_requests */ extern uma_zone_t ata_zone; #define ata_alloc_request() uma_zalloc(ata_zone, M_NOWAIT | M_ZERO) #define ata_free_request(request) uma_zfree(ata_zone, request) /* macros for locking a channel */ #define ATA_LOCK_CH(ch, value) \ atomic_cmpset_acq_int(&(ch)->state, ATA_IDLE, (value)) #define ATA_SLEEPLOCK_CH(ch, value) \ while (!atomic_cmpset_acq_int(&(ch)->state, ATA_IDLE, (value))) \ tsleep((caddr_t)&(ch), PRIBIO, "atalck", 1); #define ATA_FORCELOCK_CH(ch, value) atomic_store_rel_int(&(ch)->state, (value)) #define ATA_UNLOCK_CH(ch) atomic_store_rel_int(&(ch)->state, ATA_IDLE) /* macros to hide busspace uglyness */ #define ATA_INB(res, offset) \ bus_space_read_1(rman_get_bustag((res)), \ rman_get_bushandle((res)), (offset)) #define ATA_INW(res, offset) \ bus_space_read_2(rman_get_bustag((res)), \ rman_get_bushandle((res)), (offset)) #define ATA_INL(res, offset) \ bus_space_read_4(rman_get_bustag((res)), \ rman_get_bushandle((res)), (offset)) #define ATA_INSW(res, offset, addr, count) \ bus_space_read_multi_2(rman_get_bustag((res)), \ rman_get_bushandle((res)), \ (offset), (addr), (count)) #define ATA_INSW_STRM(res, offset, addr, count) \ bus_space_read_multi_stream_2(rman_get_bustag((res)), \ rman_get_bushandle((res)), \ (offset), (addr), (count)) #define ATA_INSL(res, offset, addr, count) \ bus_space_read_multi_4(rman_get_bustag((res)), \ rman_get_bushandle((res)), \ (offset), (addr), (count)) #define ATA_INSL_STRM(res, offset, addr, count) \ bus_space_read_multi_stream_4(rman_get_bustag((res)), \ rman_get_bushandle((res)), \ (offset), (addr), (count)) #define ATA_OUTB(res, offset, value) \ bus_space_write_1(rman_get_bustag((res)), \ rman_get_bushandle((res)), (offset), (value)) #define ATA_OUTW(res, offset, value) \ bus_space_write_2(rman_get_bustag((res)), \ rman_get_bushandle((res)), (offset), (value)) #define ATA_OUTL(res, offset, value) \ bus_space_write_4(rman_get_bustag((res)), \ rman_get_bushandle((res)), (offset), (value)) #define ATA_OUTSW(res, offset, addr, count) \ bus_space_write_multi_2(rman_get_bustag((res)), \ rman_get_bushandle((res)), \ (offset), (addr), (count)) #define ATA_OUTSW_STRM(res, offset, addr, count) \ bus_space_write_multi_stream_2(rman_get_bustag((res)), \ rman_get_bushandle((res)), \ (offset), (addr), (count)) #define ATA_OUTSL(res, offset, addr, count) \ bus_space_write_multi_4(rman_get_bustag((res)), \ rman_get_bushandle((res)), \ (offset), (addr), (count)) #define ATA_OUTSL_STRM(res, offset, addr, count) \ bus_space_write_multi_stream_4(rman_get_bustag((res)), \ rman_get_bushandle((res)), \ (offset), (addr), (count)) #define ATA_IDX_SET(ch, idx) \ ATA_OUTB(ch->r_io[ATA_IDX_ADDR].res, ch->r_io[ATA_IDX_ADDR].offset, \ ch->r_io[idx].offset) #define ATA_IDX_INB(ch, idx) \ ((ch->r_io[idx].res) \ ? ATA_INB(ch->r_io[idx].res, ch->r_io[idx].offset) \ : (ATA_IDX_SET(ch, idx), \ ATA_INB(ch->r_io[ATA_IDX_DATA].res, ch->r_io[ATA_IDX_DATA].offset))) #define ATA_IDX_INW(ch, idx) \ ((ch->r_io[idx].res) \ ? ATA_INW(ch->r_io[idx].res, ch->r_io[idx].offset) \ : (ATA_IDX_SET(ch, idx), \ ATA_INW(ch->r_io[ATA_IDX_DATA].res, ch->r_io[ATA_IDX_DATA].offset))) #define ATA_IDX_INL(ch, idx) \ ((ch->r_io[idx].res) \ ? ATA_INL(ch->r_io[idx].res, ch->r_io[idx].offset) \ : (ATA_IDX_SET(ch, idx), \ ATA_INL(ch->r_io[ATA_IDX_DATA].res, ch->r_io[ATA_IDX_DATA].offset))) #define ATA_IDX_INSW(ch, idx, addr, count) \ ((ch->r_io[idx].res) \ ? ATA_INSW(ch->r_io[idx].res, ch->r_io[idx].offset, addr, count) \ : (ATA_IDX_SET(ch, idx), \ ATA_INSW(ch->r_io[ATA_IDX_DATA].res, \ ch->r_io[ATA_IDX_DATA].offset, addr, count))) #define ATA_IDX_INSW_STRM(ch, idx, addr, count) \ ((ch->r_io[idx].res) \ ? ATA_INSW_STRM(ch->r_io[idx].res, ch->r_io[idx].offset, addr, count) \ : (ATA_IDX_SET(ch, idx), \ ATA_INSW_STRM(ch->r_io[ATA_IDX_DATA].res, \ ch->r_io[ATA_IDX_DATA].offset, addr, count))) #define ATA_IDX_INSL(ch, idx, addr, count) \ ((ch->r_io[idx].res) \ ? ATA_INSL(ch->r_io[idx].res, ch->r_io[idx].offset, addr, count) \ : (ATA_IDX_SET(ch, idx), \ ATA_INSL(ch->r_io[ATA_IDX_DATA].res, \ ch->r_io[ATA_IDX_DATA].offset, addr, count))) #define ATA_IDX_INSL_STRM(ch, idx, addr, count) \ ((ch->r_io[idx].res) \ ? ATA_INSL_STRM(ch->r_io[idx].res, ch->r_io[idx].offset, addr, count) \ : (ATA_IDX_SET(ch, idx), \ ATA_INSL_STRM(ch->r_io[ATA_IDX_DATA].res, \ ch->r_io[ATA_IDX_DATA].offset, addr, count))) #define ATA_IDX_OUTB(ch, idx, value) \ ((ch->r_io[idx].res) \ ? ATA_OUTB(ch->r_io[idx].res, ch->r_io[idx].offset, value) \ : (ATA_IDX_SET(ch, idx), \ ATA_OUTB(ch->r_io[ATA_IDX_DATA].res, \ ch->r_io[ATA_IDX_DATA].offset, value))) #define ATA_IDX_OUTW(ch, idx, value) \ ((ch->r_io[idx].res) \ ? ATA_OUTW(ch->r_io[idx].res, ch->r_io[idx].offset, value) \ : (ATA_IDX_SET(ch, idx), \ ATA_OUTW(ch->r_io[ATA_IDX_DATA].res, \ ch->r_io[ATA_IDX_DATA].offset, value))) #define ATA_IDX_OUTL(ch, idx, value) \ ((ch->r_io[idx].res) \ ? ATA_OUTL(ch->r_io[idx].res, ch->r_io[idx].offset, value) \ : (ATA_IDX_SET(ch, idx), \ ATA_OUTL(ch->r_io[ATA_IDX_DATA].res, \ ch->r_io[ATA_IDX_DATA].offset, value))) #define ATA_IDX_OUTSW(ch, idx, addr, count) \ ((ch->r_io[idx].res) \ ? ATA_OUTSW(ch->r_io[idx].res, ch->r_io[idx].offset, addr, count) \ : (ATA_IDX_SET(ch, idx), \ ATA_OUTSW(ch->r_io[ATA_IDX_DATA].res, \ ch->r_io[ATA_IDX_DATA].offset, addr, count))) #define ATA_IDX_OUTSW_STRM(ch, idx, addr, count) \ ((ch->r_io[idx].res) \ ? ATA_OUTSW_STRM(ch->r_io[idx].res, ch->r_io[idx].offset, addr, count) \ : (ATA_IDX_SET(ch, idx), \ ATA_OUTSW_STRM(ch->r_io[ATA_IDX_DATA].res, \ ch->r_io[ATA_IDX_DATA].offset, addr, count))) #define ATA_IDX_OUTSL(ch, idx, addr, count) \ ((ch->r_io[idx].res) \ ? ATA_OUTSL(ch->r_io[idx].res, ch->r_io[idx].offset, addr, count) \ : (ATA_IDX_SET(ch, idx), \ ATA_OUTSL(ch->r_io[ATA_IDX_DATA].res, \ ch->r_io[ATA_IDX_DATA].offset, addr, count))) #define ATA_IDX_OUTSL_STRM(ch, idx, addr, count) \ ((ch->r_io[idx].res) \ ? ATA_OUTSL_STRM(ch->r_io[idx].res, ch->r_io[idx].offset, addr, count) \ : (ATA_IDX_SET(ch, idx), \ ATA_OUTSL_STRM(ch->r_io[ATA_IDX_DATA].res, \ ch->r_io[ATA_IDX_DATA].offset, addr, count)))