/* * Product specific probe and attach routines for: * Adaptec 154x. * * Derived from code written by: * * Copyright (c) 1998 Justin T. Gibbs * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions, and the following disclaimer, * without modification, immediately at the beginning of the file. * 2. The name of the author may not be used to endorse or promote products * derived from this software without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. * * $Id: aha_isa.c,v 1.6 1999/01/20 06:21:23 imp Exp $ */ #include "pnp.h" #include #include #include #include #include #include #include #include #if NPNP > 0 #include #endif static int aha_isa_probe(struct isa_device *dev); static int aha_isa_attach(struct isa_device *dev); static void aha_isa_intr(void *unit); struct isa_driver ahadriver = { aha_isa_probe, aha_isa_attach, "aha" }; /* * Check if the device can be found at the port given * and if so, set it up ready for further work * as an argument, takes the isa_device structure from * autoconf.c */ static int aha_isa_probe(dev) struct isa_device *dev; { /* * find unit and check we have that many defined */ struct aha_softc *aha; int port_index; int max_port_index; aha = NULL; /* * Bound our board search if the user has * specified an exact port. */ aha_find_probe_range(dev->id_iobase, &port_index, &max_port_index); if (port_index < 0) return 0; /* Attempt to find an adapter */ for (;port_index <= max_port_index; port_index++) { config_data_t config_data; u_int ioport; int error; ioport = aha_iop_from_bio(port_index); /* * Ensure this port has not already been claimed already * by a PCI, EISA or ISA adapter. */ if (aha_check_probed_iop(ioport) != 0) continue; dev->id_iobase = ioport; if (haveseen_isadev(dev, CC_IOADDR | CC_QUIET)) continue; /* Allocate a softc for use during probing */ aha = aha_alloc(dev->id_unit, I386_BUS_SPACE_IO, ioport); if (aha == NULL) break; /* We're going to attempt to probe it now, so mark it probed */ aha_mark_probed_bio(port_index); /* See if there is really a card present */ if (aha_probe(aha) || aha_fetch_adapter_info(aha)) { aha_free(aha); continue; } /* * Determine our IRQ, and DMA settings and * export them to the configuration system. */ error = aha_cmd(aha, AOP_INQUIRE_CONFIG, NULL, /*parmlen*/0, (u_int8_t*)&config_data, sizeof(config_data), DEFAULT_CMD_TIMEOUT); if (error != 0) { printf("aha_isa_probe: Could not determine IRQ or DMA " "settings for adapter at 0x%x. Failing probe\n", ioport); aha_free(aha); continue; } switch (config_data.dma_chan) { case DMA_CHAN_5: dev->id_drq = 5; break; case DMA_CHAN_6: dev->id_drq = 6; break; case DMA_CHAN_7: dev->id_drq = 7; break; default: printf("aha_isa_probe: Invalid DMA setting " "detected for adapter at 0x%x. " "Failing probe\n", ioport); return (0); } dev->id_irq = (config_data.irq << 9); dev->id_intr = aha_isa_intr; aha_unit++; return (AHA_NREGS); } return (0); } /* * Attach all the sub-devices we can find */ static int aha_isa_attach(dev) struct isa_device *dev; { struct aha_softc *aha; bus_dma_filter_t *filter; void *filter_arg; bus_addr_t lowaddr; aha = aha_softcs[dev->id_unit]; if (dev->id_drq != -1) isa_dmacascade(dev->id_drq); /* Allocate our parent dmatag */ filter = NULL; filter_arg = NULL; lowaddr = BUS_SPACE_MAXADDR_24BIT; if (bus_dma_tag_create(/*parent*/NULL, /*alignemnt*/0, /*boundary*/0, lowaddr, /*highaddr*/BUS_SPACE_MAXADDR, filter, filter_arg, /*maxsize*/BUS_SPACE_MAXSIZE_24BIT, /*nsegments*/BUS_SPACE_UNRESTRICTED, /*maxsegsz*/BUS_SPACE_MAXSIZE_24BIT, /*flags*/0, &aha->parent_dmat) != 0) { aha_free(aha); return (-1); } if (aha_init(aha)) { printf("aha init failed\n"); aha_free(aha); return (-1); } return (aha_attach(aha)); } /* * Handle an ISA interrupt. * XXX should go away as soon as ISA interrupt handlers * take a (void *) arg. */ static void aha_isa_intr(void *unit) { struct aha_softc* arg = aha_softcs[(int)unit]; aha_intr((void *)arg); } /* * support PnP cards if we are using 'em */ #if NPNP > 0 static char *ahapnp_probe(u_long csn, u_long vend_id); static void ahapnp_attach(u_long csn, u_long vend_id, char *name, struct isa_device *dev); static u_long nahapnp = NAHA; static struct pnp_device ahapnp = { "ahapnp", ahapnp_probe, ahapnp_attach, &nahapnp, &bio_imask }; DATA_SET (pnpdevice_set, ahapnp); static char * ahapnp_probe(u_long csn, u_long vend_id) { struct pnp_cinfo d; char *s = NULL; if (vend_id != AHA1542_PNP && vend_id != AHA1542_PNPCOMPAT) return (NULL); read_pnp_parms(&d, 0); if (d.enable == 0 || d.flags & 1) { printf("CSN %lu is disabled.\n", csn); return (NULL); } s = "Adaptec 1542CP"; return (s); } static void ahapnp_attach(u_long csn, u_long vend_id, char *name, struct isa_device *dev) { struct pnp_cinfo d; if (dev->id_unit >= NAHATOT) return; if (read_pnp_parms(&d, 0) == 0) { printf("failed to read pnp parms\n"); return; } write_pnp_parms(&d, 0); enable_pnp_card(); dev->id_iobase = d.port[0]; dev->id_irq = (1 << d.irq[0]); dev->id_intr = aha_intr; dev->id_drq = d.drq[0]; if (dev->id_driver == NULL) { dev->id_driver = &ahadriver; dev->id_id = isa_compat_nextid(); } if ((dev->id_alive = aha_isa_probe(dev)) != 0) aha_isa_attach(dev); else printf("aha%d: probe failed\n", dev->id_unit); } #endif