/*- * Copyright (c) 2014 Ruslan Bukin * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. */ /* * Vybrid Family Display Control Unit (DCU4) * Chapter 55, Vybrid Reference Manual, Rev. 5, 07/2013 */ #include __FBSDID("$FreeBSD$"); #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include "gpio_if.h" #include #include #include #include #include "fb_if.h" #include #define DCU_CTRLDESCCURSOR1 0x000 /* Control Descriptor Cursor 1 */ #define DCU_CTRLDESCCURSOR2 0x004 /* Control Descriptor Cursor 2 */ #define DCU_CTRLDESCCURSOR3 0x008 /* Control Descriptor Cursor 3 */ #define DCU_CTRLDESCCURSOR4 0x00C /* Control Descriptor Cursor 4 */ #define DCU_DCU_MODE 0x010 /* DCU4 Mode */ #define DCU_MODE_M 0x3 #define DCU_MODE_S 0 #define DCU_MODE_NORMAL 0x1 #define DCU_MODE_TEST 0x2 #define DCU_MODE_COLBAR 0x3 #define RASTER_EN (1 << 14) /* Raster scan of pixel data */ #define PDI_EN (1 << 13) #define PDI_DE_MODE (1 << 11) #define PDI_MODE_M 2 #define DCU_BGND 0x014 /* Background */ #define DCU_DISP_SIZE 0x018 /* Display Size */ #define DELTA_M 0x7ff #define DELTA_Y_S 16 #define DELTA_X_S 0 #define DCU_HSYN_PARA 0x01C /* Horizontal Sync Parameter */ #define BP_H_SHIFT 22 #define PW_H_SHIFT 11 #define FP_H_SHIFT 0 #define DCU_VSYN_PARA 0x020 /* Vertical Sync Parameter */ #define BP_V_SHIFT 22 #define PW_V_SHIFT 11 #define FP_V_SHIFT 0 #define DCU_SYNPOL 0x024 /* Synchronize Polarity */ #define INV_HS (1 << 0) #define INV_VS (1 << 1) #define INV_PDI_VS (1 << 8) /* Polarity of PDI input VSYNC. */ #define INV_PDI_HS (1 << 9) /* Polarity of PDI input HSYNC. */ #define INV_PDI_DE (1 << 10) /* Polarity of PDI input DE. */ #define DCU_THRESHOLD 0x028 /* Threshold */ #define LS_BF_VS_SHIFT 16 #define OUT_BUF_HIGH_SHIFT 8 #define OUT_BUF_LOW_SHIFT 0 #define DCU_INT_STATUS 0x02C /* Interrupt Status */ #define DCU_INT_MASK 0x030 /* Interrupt Mask */ #define DCU_COLBAR_1 0x034 /* COLBAR_1 */ #define DCU_COLBAR_2 0x038 /* COLBAR_2 */ #define DCU_COLBAR_3 0x03C /* COLBAR_3 */ #define DCU_COLBAR_4 0x040 /* COLBAR_4 */ #define DCU_COLBAR_5 0x044 /* COLBAR_5 */ #define DCU_COLBAR_6 0x048 /* COLBAR_6 */ #define DCU_COLBAR_7 0x04C /* COLBAR_7 */ #define DCU_COLBAR_8 0x050 /* COLBAR_8 */ #define DCU_DIV_RATIO 0x054 /* Divide Ratio */ #define DCU_SIGN_CALC_1 0x058 /* Sign Calculation 1 */ #define DCU_SIGN_CALC_2 0x05C /* Sign Calculation 2 */ #define DCU_CRC_VAL 0x060 /* CRC Value */ #define DCU_PDI_STATUS 0x064 /* PDI Status */ #define DCU_PDI_STA_MSK 0x068 /* PDI Status Mask */ #define DCU_PARR_ERR_STATUS1 0x06C /* Parameter Error Status 1 */ #define DCU_PARR_ERR_STATUS2 0x070 /* Parameter Error Status 2 */ #define DCU_PARR_ERR_STATUS3 0x07C /* Parameter Error Status 3 */ #define DCU_MASK_PARR_ERR_ST1 0x080 /* Mask Parameter Error Status 1 */ #define DCU_MASK_PARR_ERR_ST2 0x084 /* Mask Parameter Error Status 2 */ #define DCU_MASK_PARR_ERR_ST3 0x090 /* Mask Parameter Error Status 3 */ #define DCU_THRESHOLD_INP_BUF_1 0x094 /* Threshold Input 1 */ #define DCU_THRESHOLD_INP_BUF_2 0x098 /* Threshold Input 2 */ #define DCU_THRESHOLD_INP_BUF_3 0x09C /* Threshold Input 3 */ #define DCU_LUMA_COMP 0x0A0 /* LUMA Component */ #define DCU_CHROMA_RED 0x0A4 /* Red Chroma Components */ #define DCU_CHROMA_GREEN 0x0A8 /* Green Chroma Components */ #define DCU_CHROMA_BLUE 0x0AC /* Blue Chroma Components */ #define DCU_CRC_POS 0x0B0 /* CRC Position */ #define DCU_LYR_INTPOL_EN 0x0B4 /* Layer Interpolation Enable */ #define DCU_LYR_LUMA_COMP 0x0B8 /* Layer Luminance Component */ #define DCU_LYR_CHRM_RED 0x0BC /* Layer Chroma Red */ #define DCU_LYR_CHRM_GRN 0x0C0 /* Layer Chroma Green */ #define DCU_LYR_CHRM_BLUE 0x0C4 /* Layer Chroma Blue */ #define DCU_COMP_IMSIZE 0x0C8 /* Compression Image Size */ #define DCU_UPDATE_MODE 0x0CC /* Update Mode */ #define READREG (1 << 30) #define MODE (1 << 31) #define DCU_UNDERRUN 0x0D0 /* Underrun */ #define DCU_GLBL_PROTECT 0x100 /* Global Protection */ #define DCU_SFT_LCK_BIT_L0 0x104 /* Soft Lock Bit Layer 0 */ #define DCU_SFT_LCK_BIT_L1 0x108 /* Soft Lock Bit Layer 1 */ #define DCU_SFT_LCK_DISP_SIZE 0x10C /* Soft Lock Display Size */ #define DCU_SFT_LCK_HS_VS_PARA 0x110 /* Soft Lock Hsync/Vsync Parameter */ #define DCU_SFT_LCK_POL 0x114 /* Soft Lock POL */ #define DCU_SFT_LCK_L0_TRANSP 0x118 /* Soft Lock L0 Transparency */ #define DCU_SFT_LCK_L1_TRANSP 0x11C /* Soft Lock L1 Transparency */ /* Control Descriptor */ #define DCU_CTRLDESCL(n, m) 0x200 + (0x40 * n) + 0x4 * (m - 1) #define DCU_CTRLDESCLn_1(n) DCU_CTRLDESCL(n, 1) #define DCU_CTRLDESCLn_2(n) DCU_CTRLDESCL(n, 2) #define DCU_CTRLDESCLn_3(n) DCU_CTRLDESCL(n, 3) #define TRANS_SHIFT 20 #define DCU_CTRLDESCLn_4(n) DCU_CTRLDESCL(n, 4) #define BPP_MASK 0xf /* Bit per pixel Mask */ #define BPP_SHIFT 16 /* Bit per pixel Shift */ #define BPP24 0x5 #define EN_LAYER (1 << 31) /* Enable the layer */ #define DCU_CTRLDESCLn_5(n) DCU_CTRLDESCL(n, 5) #define DCU_CTRLDESCLn_6(n) DCU_CTRLDESCL(n, 6) #define DCU_CTRLDESCLn_7(n) DCU_CTRLDESCL(n, 7) #define DCU_CTRLDESCLn_8(n) DCU_CTRLDESCL(n, 8) #define DCU_CTRLDESCLn_9(n) DCU_CTRLDESCL(n, 9) #define NUM_LAYERS 64 struct panel_info { uint32_t width; uint32_t height; uint32_t h_back_porch; uint32_t h_pulse_width; uint32_t h_front_porch; uint32_t v_back_porch; uint32_t v_pulse_width; uint32_t v_front_porch; uint32_t clk_div; uint32_t backlight_pin; }; struct dcu_softc { struct resource *res[2]; bus_space_tag_t bst; bus_space_handle_t bsh; void *ih; device_t dev; device_t sc_fbd; /* fbd child */ struct fb_info sc_info; struct panel_info *panel; }; static struct resource_spec dcu_spec[] = { { SYS_RES_MEMORY, 0, RF_ACTIVE }, { SYS_RES_IRQ, 0, RF_ACTIVE }, { -1, 0 } }; static int dcu_probe(device_t dev) { if (!ofw_bus_status_okay(dev)) return (ENXIO); if (!ofw_bus_is_compatible(dev, "fsl,mvf600-dcu4")) return (ENXIO); device_set_desc(dev, "Vybrid Family Display Control Unit (DCU4)"); return (BUS_PROBE_DEFAULT); } static void dcu_intr(void *arg) { struct dcu_softc *sc; int reg; sc = arg; /* Ack interrupts */ reg = READ4(sc, DCU_INT_STATUS); WRITE4(sc, DCU_INT_STATUS, reg); /* TODO interrupt handler */ } static int get_panel_info(struct dcu_softc *sc, struct panel_info *panel) { phandle_t node; pcell_t dts_value[3]; int len; if ((node = ofw_bus_get_node(sc->dev)) == -1) return (ENXIO); /* panel size */ if ((len = OF_getproplen(node, "panel-size")) <= 0) return (ENXIO); OF_getprop(node, "panel-size", &dts_value, len); panel->width = fdt32_to_cpu(dts_value[0]); panel->height = fdt32_to_cpu(dts_value[1]); /* hsync */ if ((len = OF_getproplen(node, "panel-hsync")) <= 0) return (ENXIO); OF_getprop(node, "panel-hsync", &dts_value, len); panel->h_back_porch = fdt32_to_cpu(dts_value[0]); panel->h_pulse_width = fdt32_to_cpu(dts_value[1]); panel->h_front_porch = fdt32_to_cpu(dts_value[2]); /* vsync */ if ((len = OF_getproplen(node, "panel-vsync")) <= 0) return (ENXIO); OF_getprop(node, "panel-vsync", &dts_value, len); panel->v_back_porch = fdt32_to_cpu(dts_value[0]); panel->v_pulse_width = fdt32_to_cpu(dts_value[1]); panel->v_front_porch = fdt32_to_cpu(dts_value[2]); /* clk divider */ if ((len = OF_getproplen(node, "panel-clk-div")) <= 0) return (ENXIO); OF_getprop(node, "panel-clk-div", &dts_value, len); panel->clk_div = fdt32_to_cpu(dts_value[0]); /* backlight pin */ if ((len = OF_getproplen(node, "panel-backlight-pin")) <= 0) return (ENXIO); OF_getprop(node, "panel-backlight-pin", &dts_value, len); panel->backlight_pin = fdt32_to_cpu(dts_value[0]); return (0); } static int dcu_init(struct dcu_softc *sc) { struct panel_info *panel; int reg; int i; panel = sc->panel; /* Configure DCU */ reg = ((sc->sc_info.fb_height) << DELTA_Y_S); reg |= (sc->sc_info.fb_width / 16); WRITE4(sc, DCU_DISP_SIZE, reg); reg = (panel->h_back_porch << BP_H_SHIFT); reg |= (panel->h_pulse_width << PW_H_SHIFT); reg |= (panel->h_front_porch << FP_H_SHIFT); WRITE4(sc, DCU_HSYN_PARA, reg); reg = (panel->v_back_porch << BP_V_SHIFT); reg |= (panel->v_pulse_width << PW_V_SHIFT); reg |= (panel->v_front_porch << FP_V_SHIFT); WRITE4(sc, DCU_VSYN_PARA, reg); WRITE4(sc, DCU_BGND, 0); WRITE4(sc, DCU_DIV_RATIO, panel->clk_div); reg = (INV_VS | INV_HS); WRITE4(sc, DCU_SYNPOL, reg); /* TODO: export to panel info */ reg = (0x3 << LS_BF_VS_SHIFT); reg |= (0x78 << OUT_BUF_HIGH_SHIFT); reg |= (0 << OUT_BUF_LOW_SHIFT); WRITE4(sc, DCU_THRESHOLD, reg); /* Mask all the interrupts */ WRITE4(sc, DCU_INT_MASK, 0xffffffff); /* Reset all layers */ for (i = 0; i < NUM_LAYERS; i++) { WRITE4(sc, DCU_CTRLDESCLn_1(i), 0x0); WRITE4(sc, DCU_CTRLDESCLn_2(i), 0x0); WRITE4(sc, DCU_CTRLDESCLn_3(i), 0x0); WRITE4(sc, DCU_CTRLDESCLn_4(i), 0x0); WRITE4(sc, DCU_CTRLDESCLn_5(i), 0x0); WRITE4(sc, DCU_CTRLDESCLn_6(i), 0x0); WRITE4(sc, DCU_CTRLDESCLn_7(i), 0x0); WRITE4(sc, DCU_CTRLDESCLn_8(i), 0x0); WRITE4(sc, DCU_CTRLDESCLn_9(i), 0x0); } /* Setup first layer */ reg = (sc->sc_info.fb_width | (sc->sc_info.fb_height << 16)); WRITE4(sc, DCU_CTRLDESCLn_1(0), reg); WRITE4(sc, DCU_CTRLDESCLn_2(0), 0x0); WRITE4(sc, DCU_CTRLDESCLn_3(0), sc->sc_info.fb_pbase); reg = (BPP24 << BPP_SHIFT); reg |= EN_LAYER; reg |= (0xFF << TRANS_SHIFT); /* completely opaque */ WRITE4(sc, DCU_CTRLDESCLn_4(0), reg); WRITE4(sc, DCU_CTRLDESCLn_5(0), 0xffffff); WRITE4(sc, DCU_CTRLDESCLn_6(0), 0x0); WRITE4(sc, DCU_CTRLDESCLn_7(0), 0x0); WRITE4(sc, DCU_CTRLDESCLn_8(0), 0x0); WRITE4(sc, DCU_CTRLDESCLn_9(0), 0x0); /* Enable DCU in normal mode */ reg = READ4(sc, DCU_DCU_MODE); reg &= ~(DCU_MODE_M << DCU_MODE_S); reg |= (DCU_MODE_NORMAL << DCU_MODE_S); reg |= (RASTER_EN); WRITE4(sc, DCU_DCU_MODE, reg); WRITE4(sc, DCU_UPDATE_MODE, READREG); return (0); } static int dcu_attach(device_t dev) { struct panel_info panel; struct dcu_softc *sc; device_t gpio_dev; int err; sc = device_get_softc(dev); sc->dev = dev; if (bus_alloc_resources(dev, dcu_spec, sc->res)) { device_printf(dev, "could not allocate resources\n"); return (ENXIO); } /* Memory interface */ sc->bst = rman_get_bustag(sc->res[0]); sc->bsh = rman_get_bushandle(sc->res[0]); /* Setup interrupt handler */ err = bus_setup_intr(dev, sc->res[1], INTR_TYPE_BIO | INTR_MPSAFE, NULL, dcu_intr, sc, &sc->ih); if (err) { device_printf(dev, "Unable to alloc interrupt resource.\n"); return (ENXIO); } if (get_panel_info(sc, &panel)) { device_printf(dev, "Can't get panel info\n"); return (ENXIO); } sc->panel = &panel; /* Bypass timing control (used for raw lcd panels) */ tcon_bypass(); /* Get the GPIO device, we need this to give power to USB */ gpio_dev = devclass_get_device(devclass_find("gpio"), 0); if (gpio_dev == NULL) { device_printf(sc->dev, "Error: failed to get the GPIO dev\n"); return (1); } /* Turn on backlight */ /* TODO: Use FlexTimer/PWM */ GPIO_PIN_SETFLAGS(gpio_dev, panel.backlight_pin, GPIO_PIN_OUTPUT); GPIO_PIN_SET(gpio_dev, panel.backlight_pin, GPIO_PIN_HIGH); sc->sc_info.fb_width = panel.width; sc->sc_info.fb_height = panel.height; sc->sc_info.fb_stride = sc->sc_info.fb_width * 3; sc->sc_info.fb_bpp = sc->sc_info.fb_depth = 24; sc->sc_info.fb_size = sc->sc_info.fb_height * sc->sc_info.fb_stride; sc->sc_info.fb_vbase = (intptr_t)contigmalloc(sc->sc_info.fb_size, M_DEVBUF, M_ZERO, 0, ~0, PAGE_SIZE, 0); sc->sc_info.fb_pbase = (intptr_t)vtophys(sc->sc_info.fb_vbase); #if 0 printf("%dx%d [%d]\n", sc->sc_info.fb_width, sc->sc_info.fb_height, sc->sc_info.fb_stride); printf("pbase == 0x%08x\n", sc->sc_info.fb_pbase); #endif memset((int8_t *)sc->sc_info.fb_vbase, 0x0, sc->sc_info.fb_size); dcu_init(sc); sc->sc_info.fb_name = device_get_nameunit(dev); /* Ask newbus to attach framebuffer device to me. */ sc->sc_fbd = device_add_child(dev, "fbd", device_get_unit(dev)); if (sc->sc_fbd == NULL) device_printf(dev, "Can't attach fbd device\n"); if (device_probe_and_attach(sc->sc_fbd) != 0) { device_printf(sc->dev, "Failed to attach fbd device\n"); } return (0); } static struct fb_info * dcu4_fb_getinfo(device_t dev) { struct dcu_softc *sc = device_get_softc(dev); return (&sc->sc_info); } static device_method_t dcu_methods[] = { DEVMETHOD(device_probe, dcu_probe), DEVMETHOD(device_attach, dcu_attach), /* Framebuffer service methods */ DEVMETHOD(fb_getinfo, dcu4_fb_getinfo), { 0, 0 } }; static driver_t dcu_driver = { "fb", dcu_methods, sizeof(struct dcu_softc), }; static devclass_t dcu_devclass; DRIVER_MODULE(fb, simplebus, dcu_driver, dcu_devclass, 0, 0);