/* Apple Copyright 2009 CoreOS - vector & Numerics, cclee 10-22-09 This following source code implements a vectorized version of adler32 computation that is defined in zlib. The target architectures are x86_64 and i386. Given 2 unsigned 32-bit alder and sum2 (both pre-modulo by BASE=65521) and a sequence of input bytes x[0],...x[N-1]. The adler-sum2 pair is updated according to for (i=0;i= NMAX) { // len -= NMAX; // n = NMAX / 16; /* NMAX is divisible by 16 */ // do { // DO16(buf); /* 16 sums unrolled */ // buf += 16; // } while (--n); // MOD(adler); // MOD(sum2); // } // if (len) { /* avoid modulos if none remaining */ // while (len >= 16) { // len -= 16; // DO16(buf); // buf += 16; // } // while (len--) { // adler += *buf++; // sum2 += adler; // } // MOD(adler); // MOD(sum2); // } // return adler | (sum2 << 16); // } #if (defined __i386__ || defined __x86_64__) #include .text .align 4,0x90 .globl _adler32_vec _adler32_vec: #if (defined __i386__) pushl %ebp movl %esp, %ebp pushl %ebx pushl %edi pushl %esi #ifdef KERNEL // if this is for kernel, need to save xmm registers subl $140, %esp // to save %xmm0-%xmm7 into stack, extra 12 to align %esp to 16-byte boundary movaps %xmm0, 0(%esp) // save xmm0, offset -12 for ebx/edi/esi movaps %xmm1, 16(%esp) // save xmm1 movaps %xmm2, 32(%esp) // save xmm2 movaps %xmm3, 48(%esp) // save xmm3 movaps %xmm4, 64(%esp) // save xmm4 movaps %xmm5, 80(%esp) // save xmm5 movaps %xmm6, 96(%esp) // save xmm6 movaps %xmm7, 112(%esp) // save xmm7, if this is for SSSE3 or above #endif #define adler %edi // 8(%ebp) #define sum2 %esi // 12(%ebp) #define buf %ecx // 16(%ebp) #define len %ebx // 20(%ebp) #define zero %xmm0 #define ones %xmm5 movl 8(%ebp), adler movl 12(%ebp), sum2 movl 16(%ebp), buf // use ecx as buf pointer movl 20(%ebp), len .macro modulo_BASE movl $$-2146992015, %eax // 1/BASE in Q47 mull adler // edx:eax = adler divided by BASE in Q47 shrl $$15, %edx // edx is now the floor integer of adler and BASE imull $$BASE, %edx, %edx // edx * BASE subl %edx, adler // adler -= edx*BASE movl $$-2146992015, %eax // 1/BASE in Q47 mull sum2 // edx:eax = sum2 divided by BASE in Q47 shrl $$15, %edx // edx is now the floor integer of sum2 and BASE imull $$BASE, %edx, %eax // eax = edx * BASE subl %eax, sum2 // sum2 -= sdx*BASE .endmacro // update adler/sum2 according to a new 16-byte vector .macro DO16 movaps (buf), %xmm1 // 16 bytes vector, in xmm1 movaps %xmm1, %xmm3 // a copy of the vector, used for unsigned byte in the destination of pmaddubsw addl $$16, buf // buf -> next vector psadbw zero, %xmm1 // 2 16-bit words to be added for adler in xmm1 pmaddubsw %xmm4, %xmm3 // 8 16-bit words to be added for sum2 in xmm3 imull $$16, adler, %edx // edx = 16*adler; movhlps %xmm1, %xmm2 // higher 16-bit word (for adler) in xmm2 pmaddwd ones, %xmm3 // 4 32-bit elements to be added for sum2 in xmm3 paddq %xmm2, %xmm1 // xmm1 lower 32-bit to be added to adler addl %edx, sum2 // sum2 += adler*16; movhlps %xmm3, %xmm2 // 2 higher 32-bit elements of xmm3 to be added to lower 2 32-bit elements movd %xmm1, %edx // to be added to adler paddd %xmm2, %xmm3 // 2 32-bits elements in xmm3 to be added to sum2 addl %edx, adler // update adler movd %xmm3, %edx // to be added to sum2 psrlq $$32, %xmm3 // another 32-bit to be added to sum2 addl %edx, sum2 // sum2 += 1st half of update movd %xmm3, %edx // to be added to sum2 addl %edx, sum2 // sum2 += 2nd half of update .endm // update adler/sum2 according to a new 32-byte vector .macro DO32 imull $$32, adler, %edx // edx = 32*adler movaps (buf), %xmm1 // 1st 16 bytes vector movaps 16(buf), %xmm7 // 2nd 16 bytes vector movaps %xmm1, %xmm3 // a copy of 1st vector, used for unsigned byte in the destination of pmaddubsw movaps %xmm7, %xmm2 // a copy of 2nd vector, used for unsigned byte in the destination of pmaddubsw psadbw zero, %xmm1 // 2 16-bit words to be added for adler in xmm1 psadbw zero, %xmm7 // 2 16-bit words to be added for adler in xmm7 addl %edx, sum2 // sum2 += adler*32; pmaddubsw %xmm6, %xmm3 // 8 16-bit words to be added for sum2 in xmm3 pmaddubsw %xmm4, %xmm2 // 8 16-bit words to be added for sum2 in xmm2 paddd %xmm7, %xmm1 // 2 16-bit words to be added for adler in xmm1 paddd %xmm2, %xmm3 // 8 16-bit words to be added for sum2 in xmm3 addl $$32, buf // buf -> vector for next iteration movhlps %xmm1, %xmm2 // higher 16-bit word (for adler) in xmm2 pmaddwd ones, %xmm3 // 4 32-bit elements to be added for sum2 in xmm3 paddq %xmm2, %xmm1 // xmm1 lower 32-bit to be added to adler movhlps %xmm3, %xmm2 // 2 higher 32-bit elements of xmm3 to be added to lower 2 32-bit elements movd %xmm1, %edx // to be added to adler paddd %xmm2, %xmm3 // 2 32-bits elements in xmm3 to be added to sum2 addl %edx, adler // update adler movd %xmm3, %edx // to be added to sum2 psrlq $$32, %xmm3 // another 32-bit to be added to sum2 addl %edx, sum2 // sum2 += 1st half of update movd %xmm3, %edx // to be added to sum2 addl %edx, sum2 // sum2 += 2nd half of update .endm // this defines the macro DO16 for SSSE3 not supported .macro DO16_nossse3 movaps (buf), %xmm1 // 16 bytes vector movaps %xmm1, %xmm3 // a copy of the vector, the lower 8 bytes to be shuffled into 8 words movaps %xmm1, %xmm2 // a copy of the vector, the higher 8 bytes to be shuffled into 8 words psrldq $$8, %xmm2 // shift down 8 bytes, to reuse the shuffle vector punpcklbw zero, %xmm3 // convert lower 8 bytes into 8 words punpcklbw zero, %xmm2 // convert higher 8 bytes into 8 words pmullw %xmm6, %xmm3 // lower 8 words * 16:9 pmullw %xmm4, %xmm2 // higher 8 words * 8:1 addl $$16, buf // buf -> next vector psadbw zero, %xmm1 // 2 16-bit words to be added for adler in xmm1 paddw %xmm2, %xmm3 // 8 16-bit words to be added for sum2 in xmm3 imull $$16, adler, %edx // edx = 16*adler; movhlps %xmm1, %xmm2 // higher 16-bit word (for adler) in xmm2 pmaddwd ones, %xmm3 // 4 32-bit elements to be added for sum2 in xmm3 paddq %xmm2, %xmm1 // xmm1 lower 32-bit to be added to adler addl %edx, sum2 // sum2 += adler*16; movhlps %xmm3, %xmm2 // 2 higher 32-bit elements of xmm3 to be added to lower 2 32-bit elements movd %xmm1, %edx // to be added to adler paddd %xmm2, %xmm3 // 2 32-bits elements in xmm3 to be added to sum2 addl %edx, adler // update adler movd %xmm3, %edx // to be added to sum2 psrlq $$32, %xmm3 // another 32-bit to be added to sum2 addl %edx, sum2 // sum2 += 1st half of update movd %xmm3, %edx // to be added to sum2 addl %edx, sum2 // sum2 += 2nd half of update .endm #ifdef KERNEL leal __cpu_capabilities, %eax // %eax -> __cpu_capabilities mov (%eax), %eax // %eax = __cpu_capabilities #else mov _COMM_PAGE_CPU_CAPABILITIES, %eax #endif test $(kHasSupplementalSSE3), %eax // __cpu_capabilities & kHasAES je L_no_ssse3 // i386 adler32 with ssse3 // need to fill up xmm4/xmm5/xmm6 only if len>=16 cmpl $16, len jl L_skip_loading_tables // set up table starting address to %eax leal sum2_coefficients, %eax // reading coefficients pxor zero, zero movaps (%eax), %xmm6 // coefficients for computing sum2 : pmaddubsw 32:17 movaps 16(%eax), %xmm4 // coefficients for computing sum2 : pmaddubsw 16:1 movaps 32(%eax), ones // coefficients for computing sum2 : pmaddwd 1,1,...,1 L_skip_loading_tables: cmpl $NMAX, len // len vs NMAX jl len_lessthan_NMAX // if (len < NMAX), skip the following NMAX batches processing len_ge_NMAX_loop: // while (len>=NMAX) { subl $NMAX, len // len -= NMAX movl $(NMAX/32), %eax // n = NMAX/32 n_loop: // do { DO32 // update adler/sum2 for a 32-byte input decl %eax // n--; jg n_loop // } while (n); DO16 // update adler/sum2 for a 16-byte input modulo_BASE // (adler/sum2) modulo BASE; cmpl $NMAX, len // jge len_ge_NMAX_loop // } /* len>=NMAX */ len_lessthan_NMAX: subl $32, len // pre-decrement len by 32 jl len_lessthan_32 // if len < 32, skip the 32-vector code len32_loop: // while (len>=32) { DO32 // update adler/sum2 for a 32-byte input subl $32, len // len -= 32; jge len32_loop // } len_lessthan_32: addl $(32-16), len // post-increment by 32 + pre-decrement by 16 on len jl L_len_lessthan_16 // if len < 16, skip the 16-vector code DO16 // update adler/sum2 for a 16-byte input subl $16, len // len -= 16; L_len_lessthan_16: addl $16, len // post-increment len by 16 jz len_is_zero // if len==0, branch over scalar processing 0: // while (len) { movzbl (buf), %edx // new input byte incl buf // buf++ addl %edx, adler // adler += *buf addl adler, sum2 // sum2 += adler subl $1, len // len-- jg 0b // } len_is_zero: modulo_BASE // (adler/sum2) modulo BASE; // construct 32-bit (sum2<<16 | adler) to be returned sall $16, sum2 // sum2 <<16 movl adler, %eax // adler orl sum2, %eax // sum2<<16 | adler #ifdef KERNEL // if this is for kernel code, need to restore xmm registers movaps (%esp), %xmm0 // restore xmm0, offset -12 for ebx/edi/esi movaps 16(%esp), %xmm1 // restore xmm1 movaps 32(%esp), %xmm2 // restore xmm2 movaps 48(%esp), %xmm3 // restore xmm3 movaps 64(%esp), %xmm4 // restore xmm4 movaps 80(%esp), %xmm5 // restore xmm5 movaps 96(%esp), %xmm6 // restore xmm6 movaps 112(%esp), %xmm7 // restore xmm7, if this is for SSSE3 or above addl $140, %esp // we've already restored %xmm0-%xmm7 from stack #endif popl %esi popl %edi popl %ebx leave // pop ebp out from stack ret L_no_ssse3: // i386 adler32 without ssse3 // need to fill up xmm4/xmm5/xmm6 only if len>=16 cmpl $16, len jl 2f // set up table starting address to %eax leal sum2_coefficients, %eax // reading coefficients pxor zero, zero movaps 48(%eax), %xmm6 // coefficients for computing sum2 : pmaddubsw 16:9 movaps 64(%eax), %xmm4 // coefficients for computing sum2 : pmaddubsw 8:1 movaps 80(%eax), ones // coefficients for computing sum2 : pmaddwd 1,1,...,1 2: cmpl $NMAX, len // len vs NMAX jl 3f // if (len < NMAX), skip the following NMAX batches processing 0: // while (len>=NMAX) { subl $NMAX, len // len -= NMAX movl $(NMAX/16), %eax // n = NMAX/16 1: // do { DO16_nossse3 // update adler/sum2 for a 16-byte input decl %eax // n--; jg 1b // } while (n); modulo_BASE // (adler/sum2) modulo BASE; cmpl $NMAX, len // jge 0b // } /* len>=NMAX */ 3: subl $16, len // pre-decrement len by 16 jl L_len_lessthan_16 // if len < 16, skip the 16-vector code DO16_nossse3 // update adler/sum2 for a 16-byte input subl $16, len // len -= 16; jmp L_len_lessthan_16 .const .align 4 sum2_coefficients: // used for vectorizing adler32 computation .byte 32 .byte 31 .byte 30 .byte 29 .byte 28 .byte 27 .byte 26 .byte 25 .byte 24 .byte 23 .byte 22 .byte 21 .byte 20 .byte 19 .byte 18 .byte 17 .byte 16 .byte 15 .byte 14 .byte 13 .byte 12 .byte 11 .byte 10 .byte 9 .byte 8 .byte 7 .byte 6 .byte 5 .byte 4 .byte 3 .byte 2 .byte 1 // coefficients for pmaddwd, to combine into 4 32-bit elements for sum2 .word 1 .word 1 .word 1 .word 1 .word 1 .word 1 .word 1 .word 1 // data for without ssse3 .word 16 .word 15 .word 14 .word 13 .word 12 .word 11 .word 10 .word 9 .word 8 .word 7 .word 6 .word 5 .word 4 .word 3 .word 2 .word 1 // coefficients for pmaddwd, to combine into 4 32-bit elements for sum2 .word 1 .word 1 .word 1 .word 1 .word 1 .word 1 .word 1 .word 1 #else // (defined __x86_64__) movq __cpu_capabilities@GOTPCREL(%rip), %rax // %rax -> __cpu_capabilities mov (%rax), %eax // %eax = __cpu_capabilities test $(kHasSupplementalSSE3), %eax // __cpu_capabilities & kHasSupplementalSSE3 jne L_has_ssse3 // ---------------------------------------------------------------------------------- // the following is added for x86_64 without SSSE3 support // it is essentially a translated copy of the i386 code without SSSE3 code // ---------------------------------------------------------------------------------- // input : // adler : rdi // sum2 : rsi // buf : rdx // len : rcx pushq %rbp movq %rsp, %rbp pushq %rbx #ifdef KERNEL // if for kernel, save %xmm0-%xmm11 subq $200, %rsp // allocate for %xmm0-%xmm11 (192 bytes), extra 8 to align %rsp to 16-byte boundary movaps %xmm0, -32(%rbp) movaps %xmm1, -48(%rbp) movaps %xmm2, -64(%rbp) movaps %xmm3, -80(%rbp) movaps %xmm4, -96(%rbp) movaps %xmm5, -112(%rbp) movaps %xmm6, -128(%rbp) #endif #define adler %rdi // 16(%rbp) #define sum2 %rsi // 24(%ebp) #define buf %rcx // 32(%ebp) #define len %rbx // 40(%ebp) #define zero %xmm0 #define ones %xmm5 movq %rcx, len movq %rdx, buf .macro modulo_BASE movl $$-2146992015, %eax // 1/BASE in Q47 mull %edi // edx:eax = adler divided by BASE in Q47 shrl $$15, %edx // edx is now the floor integer of adler and BASE imull $$BASE, %edx, %edx // edx * BASE subq %rdx, adler // adler -= edx*BASE movl $$-2146992015, %eax // 1/BASE in Q47 mull %esi // edx:eax = sum2 divided by BASE in Q47 shrl $$15, %edx // edx is now the floor integer of sum2 and BASE imull $$BASE, %edx, %eax // eax = edx * BASE subq %rax, sum2 // sum2 -= sdx*BASE .endmacro // update adler/sum2 according to a new 16-byte vector, no ssse3 .macro DO16_nossse3 movaps (buf), %xmm1 // 16 bytes vector movaps %xmm1, %xmm3 // a copy of the vector, the lower 8 bytes to be shuffled into 8 words movaps %xmm1, %xmm2 // a copy of the vector, the higher 8 bytes to be shuffled into 8 words psrldq $$8, %xmm2 // shift down 8 bytes, to reuse the shuffle vector punpcklbw zero, %xmm3 // convert lower 8 bytes into 8 words punpcklbw zero, %xmm2 // convert higher 8 bytes into 8 words pmullw %xmm6, %xmm3 // lower 8 words * 16:9 pmullw %xmm4, %xmm2 // higher 8 words * 8:1 add $$16, buf // buf -> next vector psadbw zero, %xmm1 // 2 16-bit words to be added for adler in xmm1 paddw %xmm2, %xmm3 // 8 16-bit words to be added for sum2 in xmm3 imulq $$16, adler, %rdx // edx = 16*adler; movhlps %xmm1, %xmm2 // higher 16-bit word (for adler) in xmm2 pmaddwd ones, %xmm3 // 4 32-bit elements to be added for sum2 in xmm3 paddq %xmm2, %xmm1 // xmm1 lower 32-bit to be added to adler add %rdx, sum2 // sum2 += adler*16; movhlps %xmm3, %xmm2 // 2 higher 32-bit elements of xmm3 to be added to lower 2 32-bit elements movd %xmm1, %edx // to be added to adler paddd %xmm2, %xmm3 // 2 32-bits elements in xmm3 to be added to sum2 addq %rdx, adler // update adler movd %xmm3, %edx // to be added to sum2 psrlq $$32, %xmm3 // another 32-bit to be added to sum2 addq %rdx, sum2 // sum2 += 1st half of update movd %xmm3, %edx // to be added to sum2 addq %rdx, sum2 // sum2 += 2nd half of update .endm // need to fill up xmm4/xmm5/xmm6 only if len>=16 cmpq $16, len jl 0f // set up table starting address to %eax leaq sum2_coefficients_nossse3(%rip), %rax // reading coefficients pxor zero, zero movaps (%rax), %xmm6 // coefficients for computing sum2 : pmaddubsw 16:9 movaps 16(%rax), %xmm4 // coefficients for computing sum2 : pmaddubsw 8:1 movaps 32(%rax), ones // coefficients for computing sum2 : pmaddwd 1,1,...,1 0: cmp $NMAX, len // len vs NMAX jl 3f // if (len < NMAX), skip the following NMAX batches processing 0: // while (len>=NMAX) { sub $NMAX, len // len -= NMAX mov $(NMAX/16), %eax // n = NMAX/16 1: // do { DO16_nossse3 // update adler/sum2 for a 16-byte input decl %eax // n--; jg 1b // } while (n); modulo_BASE // (adler/sum2) modulo BASE; cmp $NMAX, len // jge 0b // } /* len>=NMAX */ 3: sub $16, len // pre-decrement len by 16 jl 2f // if len < 16, skip the 16-vector code DO16_nossse3 // update adler/sum2 for a 16-byte input sub $16, len // len -= 16; 2: add $16, len // post-increment len by 16 jz 1f // if len==0, branch over scalar processing 0: // while (len) { movzbq (buf), %rdx // new input byte incq buf // buf++ addq %rdx, adler // adler += *buf addq adler, sum2 // sum2 += adler decq len // len-- jg 0b // } 1: modulo_BASE // (adler/sum2) modulo BASE; // construct 32-bit (sum2<<16 | adler) to be returned salq $16, sum2 // sum2 <<16 movq adler, %rax // adler orq sum2, %rax // sum2<<16 | adler #ifdef KERNEL // if this is for kernel code, need to restore xmm registers movaps -32(%rbp), %xmm0 movaps -48(%rbp), %xmm1 movaps -64(%rbp), %xmm2 movaps -80(%rbp), %xmm3 movaps -96(%rbp), %xmm4 movaps -112(%rbp), %xmm5 movaps -128(%rbp), %xmm6 addq $200, %rsp // we've already restored %xmm0-%xmm11 from stack #endif popq %rbx leave ret .const .align 4 sum2_coefficients_nossse3: // used for vectorizing adler32 computation // data for without ssse3 .word 16 .word 15 .word 14 .word 13 .word 12 .word 11 .word 10 .word 9 .word 8 .word 7 .word 6 .word 5 .word 4 .word 3 .word 2 .word 1 // coefficients for pmaddwd, to combine into 4 32-bit elements for sum2 .word 1 .word 1 .word 1 .word 1 .word 1 .word 1 .word 1 .word 1 .text // ---------------------------------------------------------------------------------- // the following is the original x86_64 adler32_vec code that uses SSSE3 instructions // ---------------------------------------------------------------------------------- L_has_ssse3: // input : // adler : rdi // sum2 : rsi // buf : rdx // len : rcx pushq %rbp movq %rsp, %rbp pushq %rbx #ifdef KERNEL // if for kernel, save %xmm0-%xmm11 subq $200, %rsp // allocate for %xmm0-%xmm11 (192 bytes), extra 8 to align %rsp to 16-byte boundary movaps %xmm0, -32(%rbp) movaps %xmm1, -48(%rbp) movaps %xmm2, -64(%rbp) movaps %xmm3, -80(%rbp) movaps %xmm4, -96(%rbp) movaps %xmm5, -112(%rbp) movaps %xmm6, -128(%rbp) movaps %xmm7, -144(%rbp) movaps %xmm8, -160(%rbp) movaps %xmm9, -176(%rbp) movaps %xmm10, -192(%rbp) movaps %xmm11, -208(%rbp) #endif #define adler %rdi // 16(%rbp) #define sum2 %rsi // 24(%ebp) #define buf %rcx // 32(%ebp) #define len %rbx // 40(%ebp) #define zero %xmm0 #define ones %xmm5 movq %rcx, len movq %rdx, buf // update adler/sum2 according to a new 16-byte vector .macro DO16 movaps (buf), %xmm1 // 16 bytes vector movaps %xmm1, %xmm3 // a copy of the vector, used for unsigned byte in the destination of pmaddubsw addq $$16, buf // buf -> next vector psadbw zero, %xmm1 // 2 16-bit words to be added for adler in xmm1 pmaddubsw %xmm4, %xmm3 // 8 16-bit words to be added for sum2 in xmm3 imulq $$16, adler, %rdx // edx = 16*adler; movhlps %xmm1, %xmm2 // higher 16-bit word (for adler) in xmm2 pmaddwd ones, %xmm3 // 4 32-bit elements to be added for sum2 in xmm3 paddq %xmm2, %xmm1 // xmm1 lower 32-bit to be added to adler addq %rdx, sum2 // sum2 += adler*16; movhlps %xmm3, %xmm2 // 2 higher 32-bit elements of xmm3 to be added to lower 2 32-bit elements movd %xmm1, %edx // to be added to adler paddd %xmm2, %xmm3 // 2 32-bits elements in xmm3 to be added to sum2 addq %rdx, adler // update adler movd %xmm3, %edx // to be added to sum2 psrlq $$32, %xmm3 // another 32-bit to be added to sum2 addq %rdx, sum2 // sum2 += 1st half of update movd %xmm3, %edx // to be added to sum2 addq %rdx, sum2 // sum2 += 2nd half of update .endm // update adler/sum2 according to a new 32-byte vector .macro DO32 imulq $$32, adler, %rdx // edx = 32*adler movaps (buf), %xmm1 // 1st 16 bytes vector movaps 16(buf), %xmm7 // 2nd 16 bytes vector movaps %xmm1, %xmm3 // a copy of 1st vector, used for unsigned byte in the destination of pmaddubsw movaps %xmm7, %xmm2 // a copy of 2nd vector, used for unsigned byte in the destination of pmaddubsw psadbw zero, %xmm1 // 2 16-bit words to be added for adler in xmm1 psadbw zero, %xmm7 // 2 16-bit words to be added for adler in xmm7 addq %rdx, sum2 // sum2 += adler*32; pmaddubsw %xmm6, %xmm3 // 8 16-bit words to be added for sum2 in xmm3 pmaddubsw %xmm4, %xmm2 // 8 16-bit words to be added for sum2 in xmm2 paddd %xmm7, %xmm1 // 2 16-bit words to be added for adler in xmm1 paddw %xmm2, %xmm3 // 8 16-bit words to be added for sum2 in xmm3 addq $$32, buf // buf -> vector for next iteration movhlps %xmm1, %xmm2 // higher 16-bit word (for adler) in xmm2 pmaddwd ones, %xmm3 // 4 32-bit elements to be added for sum2 in xmm3 paddq %xmm2, %xmm1 // xmm1 lower 32-bit to be added to adler movhlps %xmm3, %xmm2 // 2 higher 32-bit elements of xmm3 to be added to lower 2 32-bit elements movd %xmm1, %edx // to be added to adler paddd %xmm2, %xmm3 // 2 32-bits elements in xmm3 to be added to sum2 addq %rdx, adler // update adler movd %xmm3, %edx // to be added to sum2 psrlq $$32, %xmm3 // another 32-bit to be added to sum2 addq %rdx, sum2 // sum2 += 1st half of update movd %xmm3, %edx // to be added to sum2 addq %rdx, sum2 // sum2 += 2nd half of update .endm // update adler/sum2 according to a new 48-byte vector .macro DO48 imulq $$48, adler, %rdx // edx = 48*adler movaps (buf), %xmm7 // 1st 16 bytes vector movaps 16(buf), %xmm10 // 2nd 16 bytes vector movaps 32(buf), %xmm11 // 3rd 16 bytes vector movaps %xmm7, %xmm1 // 1st vector movaps %xmm10, %xmm2 // 2nd vector movaps %xmm11, %xmm3 // 3rd vector psadbw zero, %xmm7 // 1st vector for adler psadbw zero, %xmm10 // 2nd vector for adler psadbw zero, %xmm11 // 3rd vector for adler addq %rdx, sum2 // sum2 += adler*48; pmaddubsw %xmm9, %xmm1 // 8 16-bit words to be added for sum2 : 1st vector pmaddubsw %xmm6, %xmm2 // 8 16-bit words to be added for sum2 : 2nd vector pmaddubsw %xmm4, %xmm3 // 8 16-bit words to be added for sum2 : 3rd vector pmaddwd ones, %xmm1 // 4 32-bit elements to be added for sum2 in xmm1 pmaddwd ones, %xmm2 // 4 32-bit elements to be added for sum2 in xmm2 pmaddwd ones, %xmm3 // 4 32-bit elements to be added for sum2 in xmm3 paddd %xmm10, %xmm7 // 2 16-bit words to be added for adler paddd %xmm11, %xmm7 // 2 16-bit words to be added for adler paddd %xmm1, %xmm3 // 4 32-bit elements to be added for sum2 paddd %xmm2, %xmm3 // 4 32-bit elements to be added for sum2 addq $$48, buf // buf -> vector for next iteration movhlps %xmm7, %xmm2 // higher 16-bit word (for adler) in xmm2 paddq %xmm2, %xmm7 // xmm7 lower 32-bit to be added to adler movhlps %xmm3, %xmm2 // 2 higher 32-bit elements of xmm3 to be added to lower 2 32-bit elements movd %xmm7, %edx // to be added to adler paddd %xmm2, %xmm3 // 2 32-bits elements in xmm3 to be added to sum2 addq %rdx, adler // update adler movd %xmm3, %edx // to be added to sum2 psrlq $$32, %xmm3 // another 32-bit to be added to sum2 addq %rdx, sum2 // sum2 += 1st half of update movd %xmm3, %edx // to be added to sum2 addq %rdx, sum2 // sum2 += 2nd half of update .endm // update adler/sum2 according to a new 64-byte vector .macro DO64 imulq $$64, adler, %rdx // edx = 64*adler movaps (buf), %xmm1 // 1st 16 bytes vector movaps 16(buf), %xmm7 // 2nd 16 bytes vector movaps 32(buf), %xmm10 // 3rd 16 bytes vector movaps 48(buf), %xmm11 // 4th 16 bytes vector movaps %xmm1, %xmm3 // 1st vector movaps %xmm11, %xmm2 // 4th vector psadbw zero, %xmm1 // 1st vector for adler psadbw zero, %xmm11 // 4th vector for adler addq %rdx, sum2 // sum2 += adler*64; pmaddubsw %xmm8, %xmm3 // 8 16-bit words to be added for sum2 : 1st vector pmaddubsw %xmm4, %xmm2 // 8 16-bit words to be added for sum2 : 4th vector pmaddwd ones, %xmm3 // 4 32-bit elements to be added for sum2 in xmm3 pmaddwd ones, %xmm2 // 4 32-bit elements to be added for sum2 in xmm2 paddd %xmm11, %xmm1 // 2 16-bit words to be added for adler in xmm1 paddd %xmm2, %xmm3 // 4 32-bit elements to be added for sum2 in xmm3 movaps %xmm7, %xmm2 // 2nd vector movaps %xmm10, %xmm11 // 3rd vector psadbw zero, %xmm7 // 2nd vector for adler psadbw zero, %xmm10 // 3rd vector for adler pmaddubsw %xmm9, %xmm2 // 8 16-bit words to be added for sum2 : 2nd vector pmaddubsw %xmm6, %xmm11 // 8 16-bit words to be added for sum2 : 3rd vector pmaddwd ones, %xmm2 // 4 32-bit elements to be added for sum2 in xmm2 pmaddwd ones, %xmm11 // 4 32-bit elements to be added for sum2 in xmm11 paddd %xmm7, %xmm1 // 2 16-bit words to be added for adler in xmm1 paddd %xmm10, %xmm1 // 2 16-bit words to be added for adler in xmm1 paddd %xmm2, %xmm3 // 4 32-bit elements to be added for sum2 in xmm3 paddd %xmm11, %xmm3 // 4 32-bit elements to be added for sum2 in xmm3 addq $$64, buf // buf -> vector for next iteration movhlps %xmm1, %xmm2 // higher 16-bit word (for adler) in xmm2 paddq %xmm2, %xmm1 // xmm1 lower 32-bit to be added to adler movhlps %xmm3, %xmm2 // 2 higher 32-bit elements of xmm3 to be added to lower 2 32-bit elements movd %xmm1, %edx // to be added to adler paddd %xmm2, %xmm3 // 2 32-bits elements in xmm3 to be added to sum2 addq %rdx, adler // update adler movd %xmm3, %edx // to be added to sum2 psrlq $$32, %xmm3 // another 32-bit to be added to sum2 addq %rdx, sum2 // sum2 += 1st half of update movd %xmm3, %edx // to be added to sum2 addq %rdx, sum2 // sum2 += 2nd half of update .endm // need to fill up xmm4/xmm5/xmm6 only if len>=16 cmpq $16, len jl skip_loading_tables // set up table starting address to %eax leaq sum2_coefficients(%rip), %rax // reading coefficients pxor zero, zero movaps (%rax), %xmm8 // coefficients for computing sum2 : pmaddubsw 64:49 movaps 16(%rax), %xmm9 // coefficients for computing sum2 : pmaddubsw 48:33 movaps 32(%rax), %xmm6 // coefficients for computing sum2 : pmaddubsw 32:17 movaps 48(%rax), %xmm4 // coefficients for computing sum2 : pmaddubsw 16:1 movaps 64(%rax), ones // coefficients for computing sum2 : pmaddwd 1,1,...,1 skip_loading_tables: cmpq $NMAX, len // len vs NMAX jl len_lessthan_NMAX // if (len < NMAX), skip the following NMAX batches processing len_ge_NMAX_loop: // while (len>=NMAX) { subq $NMAX, len // len -= NMAX movq $(NMAX/64), %rax // n = NMAX/64 n_loop: // do { DO64 // update adler/sum2 for a 64-byte input decq %rax // n--; jg n_loop // } while (n); DO48 // update adler/sum2 for a 48-byte input modulo_BASE // (adler/sum2) modulo BASE; cmpq $NMAX, len // jge len_ge_NMAX_loop // } /* len>=NMAX */ len_lessthan_NMAX: subq $64, len // pre-decrement len by 64 jl len_lessthan_64 // if len < 64, skip the 64-vector code len64_loop: // while (len>=64) { DO64 // update adler/sum2 for a 64-byte input subq $64, len // len -= 64; jge len64_loop // } len_lessthan_64: addq $(64-32), len // post-increment 64 + pre-decrement 32 of len jl len_lessthan_32 // if len < 32, skip the 32-vector code DO32 // update adler/sum2 for a 32-byte input subq $32, len // len -= 32; len_lessthan_32: addq $(32-16), len // post-increment by 32 + pre-decrement by 16 on len jl len_lessthan_16 // if len < 16, skip the 16-vector code DO16 // update adler/sum2 for a 16-byte input subq $16, len // len -= 16; len_lessthan_16: addq $16, len // post-increment len by 16 jz len_is_zero // if len==0, branch over scalar processing scalar_loop: // while (len) { movzbq (buf), %rdx // new input byte incq buf // buf++ addq %rdx, adler // adler += *buf addq adler, sum2 // sum2 += adler decq len // len-- jg scalar_loop // } len_is_zero: modulo_BASE // (adler/sum2) modulo BASE; // construct 32-bit (sum2<<16 | adler) to be returned salq $16, sum2 // sum2 <<16 movq adler, %rax // adler orq sum2, %rax // sum2<<16 | adler #ifdef KERNEL // if for kernel, restore %xmm0-%xmm11 movaps -32(%rbp), %xmm0 movaps -48(%rbp), %xmm1 movaps -64(%rbp), %xmm2 movaps -80(%rbp), %xmm3 movaps -96(%rbp), %xmm4 movaps -112(%rbp), %xmm5 movaps -128(%rbp), %xmm6 movaps -144(%rbp), %xmm7 movaps -160(%rbp), %xmm8 movaps -176(%rbp), %xmm9 movaps -192(%rbp), %xmm10 movaps -208(%rbp), %xmm11 addq $200, %rsp // we've already restored %xmm0-%xmm11 from stack #endif popq %rbx leave // pop ebp out from stack ret .const .align 4 sum2_coefficients: // used for vectorizing adler32 computation // coefficients for pmaddubsw instruction, used to generate 16-bit elements for sum2 .byte 64 .byte 63 .byte 62 .byte 61 .byte 60 .byte 59 .byte 58 .byte 57 .byte 56 .byte 55 .byte 54 .byte 53 .byte 52 .byte 51 .byte 50 .byte 49 .byte 48 .byte 47 .byte 46 .byte 45 .byte 44 .byte 43 .byte 42 .byte 41 .byte 40 .byte 39 .byte 38 .byte 37 .byte 36 .byte 35 .byte 34 .byte 33 .byte 32 .byte 31 .byte 30 .byte 29 .byte 28 .byte 27 .byte 26 .byte 25 .byte 24 .byte 23 .byte 22 .byte 21 .byte 20 .byte 19 .byte 18 .byte 17 .byte 16 .byte 15 .byte 14 .byte 13 .byte 12 .byte 11 .byte 10 .byte 9 .byte 8 .byte 7 .byte 6 .byte 5 .byte 4 .byte 3 .byte 2 .byte 1 // coefficients for pmaddwd, to combine into 4 32-bit elements for sum2 .word 1 .word 1 .word 1 .word 1 .word 1 .word 1 .word 1 .word 1 #endif // (defined __i386__) #endif // (defined __i386__ || defined __x86_64__)